Box Contents
Getting started
If you have purchased a multiple
pack you will also have the
following additional items:
Important
Step 1. Set up the base
• Plug the mains power cable
(with a clear connector) into
Important
Only use the telephone line cord
supplied. This equipment is not
designed for making emergency
telephone calls when the power
fails. Alternative arrangements
should be made for access to
emergency services.
The base station must be plugged
into the mains power at all times.
Do not connect the telephone line
cord into the wall socket until the
handset is fully charged. Only use
the power and telephone cables
supplied with the product.
D1100 / D1110 Series
Quick Start Guide
the socket marked
on the
D1102/D1112
• 1 x Additional handset and
charger
underside of the base and plug
the other end into the mains
power wall socket.
• 2 x AAA NiMH rechargeable
batteries
Step 2. Connect the charger
(Multi-pack only)
• Plug the mains power cable
(with a red colour connector)
D1101 / D1111
handset
D1101 base or D1111 base
• 1 x Mains power adaptor for
charger with red connector.
Warning!
Use only rechargeable batteries.
D1103/D1113
• 2 x Additional handsets and
chargers
into the socket marked
on
1
2
3
Getting started
Using the phone
Help
the underside of the charger
and plug the other end into the
mains power wall socket.
• 4 x AAA NiMH rechargeable
batteries
Mains power
adaptor for the base
with clear connector
Telephone line cord
• 2 x Mains power adaptors for
charger with red connector.
• Switch on the power supply
This Quick Start Guide provides all the information you need to get you
started. If you need more detailed instructions, a full user guide is available
to download in PDF format from:
D1104/D1114
• 3 x Additional handsets and
chargers
Tip
D1100 D1110 Series
Quick Start Guide
/
Position the base at least 1
metre away from other electrical
appliances to avoid interference.
Putting it as high as possible
ensures the best signal.
1
2
3
Getting started
Using the phone
Help
This Quick Start Guide provides all the information you need to get you
started. If you need more detailed instructions, full user guide is available
a
to download in PDF format from:
Please consider the environment before printing.
• 6 x AAA NiMH rechargeable
batteries
Digital cordless phone
D1100
D1110
Digital cordless phone with answering machine
Please consider the environment before printing.
2 x AAA NiMH
rechargeable
batteries
Screws and
wall plugs for
wall mounting
Quick Start
Guide
• 3 x Mains power adaptors for
charger with red connector.
Digital cordless phone
D1100
D1110
• Switch on the power supply.
Digital cordless phone with answering machine
Getting started
Handset
Display icons
• When the handset is fully
charged, plug the telephone line
cord into the socket marked
on the underside of the base
and plug the other end into the
telephone wall socket.
Step 3. Charge the handset
Step 4. Select country
• After charging your phone, the
Welcome screen appears.
Step 5. Set Date and Time
Displayed in standby mode to indicate handset is in range of the
base.
Flashes if you move out of range.
Earpiece
Display
Redial / Up
In standby, press to open and
scroll through the redial list.
• Insert the 2 x AAA NiMH
batteries supplied into the
handset and slide the battery
compartment into place.
• Press Menu and scroll
or
to Clock & Alarm then
press Select.
In talk mode, press to adjust the
volume.
• A list of countries is displayed in
the Welcome screen.
Displayed if ECO Mode is switched on
Handset ringer volume is Off.
Displayed in handsfree talk mode.
Answering machine is On. (for D1110 only)
The alarm is set to On.
Option button
(left)
Press to open the Menu.
In menu mode, press to scroll
through the options.
• Date & Time is highlighted.
Press Select.
• Place the handset on the
charger and charge for at least
24 hours. When the handset is
Press to select options displayed
on screen.
• Scroll
or
to your
When storing an entry in the
phonebook, press and hold to
enter a Pause.
Warning!
country and press Select.
• Enter the date using the format
DD/MM/YY.
Use only rechargeable batteries.
If non-rechargeable batteries
are used WRONG BATTERY will
be displayed and charging will
be stopped. Please replace with
rechargable batteries.
Talk / Handsfree
In standby mode, press to make
and receive calls.
fully charged, the
displayed.
icon is
The handset and base will be reset
to load the correct settings and the
standby screen is displayed.
Option button (right)
In standby, press to open the
Phonebook menu.
• Enter the time in 12 or 24 hour
time format. Press Save.
The keypad is locked.
In talk mode, press to switch
handsfree on and off.
Press to select options displayed
on screen.
You have answering machine (TAM) messages. (for D1110 only)
You have text messages.*
• Press
or Back until you
Navigator glow ring
return to standby.
lluminates when the phone is
in use. Flashes to indicate new
event, eg. missed call.
Phonebook / Down
In standby, press to open and
scroll through the Names list.
You have voicemail messages.*
NOTE
In talk mode, press to adjust the
volume.
You have missed calls.*
The approximate power levels of your battery are indicated as below:
star key
If you have subscribed to your
network’s Caller Display service, the
date and time is set automatically
for all handsets every time a call is
received.
*
Press and hold to switch between
In menu mode, press to scroll
through the options.
Tone and Pulse dialling.
Battery is fully charged.
Int (Intercom)
Used to make internal calls.
End call / Power on / off
Press to end a call.
Battery is partially charged.
Battery is running low.
In menu mode, press to return
to standby.
R (Recall)
For use with switchboard/PBX.
Battery is almost fully discharged (Red).
Your phone is now ready for
use.
In standby, press and hold to
switch the handset off. When
off, press to switch the handset
back on.
* For this feature to work, you must subscribe to your network provider’s
Caller Display service. A quarterly fee may be payable.
NOTE
# / Lock
Press and hold to lock the keypad.
When the memory for TAM or text messages is full, an exclamation mark
will appear below their corresponding reminder icon.
To unlock, select Unlock and follow
the on screen instructions.
|