nrf`h=obcbobk`b=drfab=
jfqbi
Turning the Handset On/Off
Transferring a Call
1. Press the More softkey.
2. Select New Call.
3. Dial the number to which you want to
transfer the call and press Call.
1. Press and hold the On-hook key
until “Switch on/off is displayed.
2. Press “Yes/No.”
RSMT=táêÉäÉëë=e~åÇëÉí
1 Top/Alarm Button
2 Earpiece Speaker
3 Colour Display
4 Four-way Navigation Key
5 On-hook and On/Off key
6 Tactile Indicators
7 Sound Off Key
8 Space
9 Multi-purpose Connector
10 Microphone
11 Key Lock and Upper/Lower Case
12 Voice Mail Access
13 Off-Hook Key
4. Select Release to connect the two parties.
Making a Call
OR
Dial the number and press
the called party is displayed if available.
OR
. The name of
Wait for an answer, announce the transfer
and then select Release.
Press
to open the call list and use the
Conference
Navigation key to scroll the list of your last
1. Press the More softkey.
twenty calls. Press Call or
OR
1. Press the Menu softkey.
2. Select Contacts, and select Call List.
3. Select contact from list.
to dial.
2. Select New Call to put the current call on
hold.
3. Dial the number of the third party.
4. Wait for an answer.
14 Softkeys
15 Mute and PTT Button
16 Volume Down
17 Volume Up
4. Press
or Call to dial the number.
5. Press More and then select Join to
conference all the parties together.
18 LED
Answering a Call
Rejecting a Call
•
Press
to answer a call in normal
Display Icons
Signal Strength
mode.
•
When the ring signal sounds, press
Call information will be stored in the Call
list.
New Message
New Message, Important
Read Message
Missed Call
OR
Battery Status
Voice Mail
•
Press the
Handsfree key to answer in
speaker mode.
Adjusting Volume Levels
Microphone Off
Ending a Call
Press to end a call.
To adjust earpiece volume
during a call:
Loudspeaker On
Loudspeaker Off
Sound Off
•
Incoming Call
Outgoing Call
System Connection
Key Lock
•
Press upper and lower volume
buttons to increase/decrease volume.
Placing a call on Hold
1. Press the More softkey.
To change ringer volume:
Headset Connected
2. Select Hold/Retrieve to put the call on
hold.
•
In the menu, select Settings.
Bluetooth Headset Connected
Bluetooth Enabled
Phone Lock
•
•
•
Select Sound & Alerts.
To retrieve the Held call:
Personal Alarm
Select Volume.
1. Press the More softkey.
Use the navigation key arrows to adjust
selected volume and press Back to save.
2. Select Hold/Retrieve to retrieve the call
on hold.
j=jáíÉä=EÇÉëáÖåF=áë=~=êÉÖáëíÉêÉÇ=íê~ÇÉã~êâ=çÑ=jáíÉä=kÉíïçêâë=`çêéçê~íáçåK==«=OMNNI=jáíÉä=kÉíïçêâë=`çêéçê~íáçåK=^ää=çíÜÉê=éêçÇìÅíë=~åÇ=ëÉêîáÅÉë=~êÉ=íÜÉ=íê~ÇÉã~êâë=çÑ=íÜÉáê=êÉëéÉÅíáîÉ=ÜçäÇÉêëK=^ää=êáÖÜíë=êÉëÉêîÉÇK
|