MP3227
User’s Guide
Portable CD Player with
AM/FM Stereo Radio and
Cassette Recorder
Before operating this product,
please read these instructions completely.
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical
enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers.
This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get
the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and
clear without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what
sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your
equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want
you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage
from loud noise is often undetectable until it is too late, this manufacturer and the Electronic Industries
Association’s Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise.
This list of sound levels is included for your protection.
Decibel
Level
30
Example
Quiet library, soft whispers
40
50
60
70
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at two feet
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet engine
100
120
140
180
Rocket launching pad
Information courtesy of the Deafness Research Foundation.
EIA
EST. 1924
We
WantYou
LISTENING
ForALifetime
2
SAFETY INSTRUCTIONS
Before using the unit, be sure to read all operating instructions
15. OVERLOADING
carefully. Please note that these are general precautions and may not
pertain to your unit. For example, this unit may not have the capability
to be connected to an outdoor antenna.
Do not overload wall outlets and extension cords as this can result in a
risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
1. READ INSTRUCTIONS
Never push objects of any kind into this product through openings as they
may touch dangerous voltage points or short out parts that could result in
fire or electric shock. Never spill or spray any type of liquid on the product.
17. OUTDOOR ANTENNA GROUNDING
All the safety and operating instructions should be read before the
product is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the product and in the operating instructions should be
adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
6. ATTACHMENTS
If an outside antenna is connected to the product, be sure the antenna
system is grounded so as to provide some protection against voltage
surges and built-up static charges. Section 810 of the National Electric
Code, ANSI/NFPA 70, provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-
in wire to an antenna discharge product, size of grounding conductors,
location of antenna discharge product, connection to grounding
electrodes, and requirements for grounding electrode.
ANTENNA
LEAD IN
WIRE
Do not use attachments not recommended by the product's
manufacturer as they may cause hazards.
7. WATER AND MOISTURE
GROUND
CLAMP
Do not use this product near water- for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool.
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
8. ACCESSORIES
Do not place this product on an unstable cart, stand, tripod, bracket, or
table. The product may fall, causing serious injury and serious damage to
the product. Use only with a cart, stand, tripod, bracket, or table
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
recommended by the manufacturer or sold with the
product. Any mounting of the product should follow the
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
PORTABLE CART WARNING
(symbol provided by RETAC)
NEC - NATIONAL ELECTRICAL CODE
S2898A
manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
8A. An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart
18. SERVICING
combination to overturn.
9. VENTILATION
Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.
Slots and openings in the cabinet and in the back or bottom are
provided for ventilation and to ensure reliable operation of the product
and to protect it from overheating. These openings must not be blocked
or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This product
should never be placed near or over a radiator or heat source. This
product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
19. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician
uses replacement parts specified by the manufacturer or those that
have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the
product is in proper operating condition.
10. POWER SOURCES
This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your appliance dealer or local power
company. For products intended to operate from battery power, or
other sources, refer to the operating instructions.
21. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling only as
recommended by the manufacturer.
22. DAMAGE REQUIRING SERVICE
Unplug the product from the wall outlet and refer servicing to qualified
11. GROUNDING OR POLARIZATION
service personnel under the following conditions:
This product is equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions, as an adjustment o other controls may result
in damage and will often require extensive work by a qualified
technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
Power-supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
f.
When the product exhibits a distinct change in performance - this
indicates a need for service.
13. LIGHTNING
23. HEAT
The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers)
that produce heat.
24. NOTE TO CATV SYSTEM INSTALLER
To protect your product from a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.
14. POWER LINES
This reminder is provided to call the CATV system installer's attention
to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point
of cable entry as practical.
An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it
can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
3
LOCATION OF CONTROLS
1
2
15
16
3
4
5
17
18
19
20
21
22
6
7
8
9
10
23
24
25
26
11
12
27
13
14
1. Carrying Handle
2. CD Compartment
3. PHONES (Headphones) Jack (Rear of
Unit)
12. Left Speaker
13. AC Power Jack (Rear of Unit)
14. Cassette Compartment
15. FM Antenna
4. Display
5. POWER and REPEAT Indicators
6. POWER Button
16. PLAY and PROGRAM Indicators
17. CD Door OPEN/CLOSE Area
18. Function (TAPE/CD/FM/AM) Switch
19. SKIP/Search (n) Button
20. PLAY/PAUSE (®p) Button
21. TUNING Control
22. SKIP/Search (o) Button
23. PROGRAM Button
24. REPEAT Button
7. VOLUME Control
8. BBS (Bass Boost System) Button
9. FM STEREO Indicator
10. AM/FM Dial Scale and Pointer
11. Cassette Buttons (left to right):
PAUSE (p)
STOP/EJECT (I)
25. Battery Compartment (Rear of Unit)
26. STOP (I) Button
27. Right Speaker
F.FWD (¦¦)
REWIND (‹‹)
PLAY (¦)
RECORD (q)
4
POWER SOURCES
This unit is designed to operate on AC household current or DC (batteries).
AC:
Use the AC polarized line cord included with the unit for operation on AC power. Insert one end of the AC
line cord into the AC power jack on the rear of the unit and the other end (with the 2 blades) into a
conveniently located AC outlet having 120V, 60Hz. When the
AC cord is plugged in, the batteries will be disconnected.
NOTE: The AC plug supplied with the unit is polarized to help
minimize the possibility of electric shock. If the AC plug does
not fit into a nonpolarized AC outlet, do not file or cut the wide
blade. It is the user’s responsibility to have an electrician
replace the obsolete outlet.
AC Outlet
BATTERY INSTALLATION
To use this unit with battery power, remove the
battery door on the rear of the unit by pressing in
on the two tabs and lifting the battery door off.
Insert eight (8) ‘C’ size batteries following the
diagram in the compartment.
NOTE: The AC power cord must be disconnected
from the AC power jack on the rear of the unit in
order for the unit to operate on battery power.
+
+
+
-
-
-
-
+
+
-
+
-
-
+
-
+
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries with
fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible
battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery
manufacturer’s directions.)
HEADPHONE JACK (REAR OF UNIT)
For private listening, connect low impedance 3.5mm (32 ohm) stereo headphones (not included) to this jack.
The speakers are automatically disconnected when the headphone plug is inserted in the jack.
5
RADIO OPERATION
2
TO PLAY THE RADIO
1
3
1
2
2
1
Tune a desired station by turning
the TUNING control.
If an FM station is selected, and is
broadcasting in FM stereo, the
FM STEREO indicator will light.
Press the POWER button 1 to
the in position and slide the
Function switch 2 to select AM or
FM; the POWER indicator will
light.
Adjust the VOLUME control 1
and BBS button 2 as desired.
Press the BBS button 2 to the in
position to enhance the bass
sound.
ANTENNAS
4
AM – This unit has a built-in
ferrite rod antenna, which
provides adequate reception in
most areas. If reception is weak,
turn the unit to improve reception.
To turn the radio off, press the
POWER button again; the
POWER indicator will go off.
FM – The FM Antenna is for FM
reception only. If reception is
weak, adjust the length and the
angle of the antenna.
COMPACT DISC (CD) OPERATION
TO INSERT A CD
1
2
3
2
1
Open the CD compartment by
pressing the CD Door OPEN/
CLOSE area. Place a disc on the
spindle, label side up, and close
the CD compartment door.
The total number of tracks will be
displayed and the CD player will
stop.
Press the POWER button 1 to
the in position and slide the
Function switch 2 to select CD;
the POWER indicator will light.
6
COMPACT DISC (CD) OPERATION (CONTINUED)
TO PLAY A CD (STANDARD CD, CD-R AND CD-RW CAN BE USED)
1
2
3
2
3
1
1
To play a disc from the beginning, To start from a specific track,
Press the POWER button 1 to the
in position and slide the Function
switch 2 to the CD position; the
POWER indicator will light. Insert
locate the track using the
press the PLAY/PAUSE (®p)
button. Press the PLAY/PAUSE
(®p) button again to pause
a CD as described in the TO playback; the CD track will blink in
SKIP/Search (o) 1 or (n) 2
button and press the PLAY/
PAUSE (®p) button 3.
INSERT A CD section on page 6.
the display.
4
5
6
2
2
1
1
1
2
To skip forward or backward To search forward or backward
through the tracks on the disc, through the music on a disc,
Adjust the VOLUME control 1 and
BBS button 2 as desired. Press
the BBS button 2 to the in position
to enhance the bass sound.
press and hold the SKIP/Search
(o) 1 or (n) 2 button, a
chattering noise will be heard.
press the SKIP/Search (o) 1 or
(n) 2 button.
7
8
FAQS:
Do I need an adapter to play 3”
singles?
No, simply insert the 3” single into the
groove.
What is the maximum time for a CD in
this unit?
The maximum time is 74 minutes.
When the disc is through playing, To turn the radio off, press the
it will stop rotating. Press the POWER button again; the
STOP (I) button to stop the disc POWER indicator will go off.
before it is finished.
What type of CDs can I play?
CD, CD-Rs and CD-RWs can be used.
NOTES:
• If a disc is inserted incorrectly, dirty, damaged or not present at all, “no” will appear in the display.
• As each track is played, the track number is shown in the display.
• To prevent damage to the disc, never open the CD door while the disc is rotating. Wait for the disc to
stop before opening the CD door. Never touch the lens when the CD compartment door is open.
• DO NOT use the carrying handle when playing a CD. The CD should only be used on a steady surface.
7
COMPACT DISC (CD) OPERATION (CONTINUED)
TO REPEATEDLY PLAY BACK ONE TRACK
1
2
3
2
2
3
1
1
1
Select a track using the SKIP/
Search (o) 1 or (n) 2 button and once, the REPEAT indicator will
Press the POWER button 1 to the
in position and slide the Function
switch 2 to the CD position and
insert a CD as described in the
TO INSERT A CD section on
page 6.
Press the REPEAT button 1
blink and the unit will play the
selected track over and over until
the STOP (I) button 2 is
pressed.
press the PLAY/ PAUSE (®p)
button 3.
TO REPEATEDLY PLAY BACK ALL TRACKS
1
2
3
2
1
1
2
Press the REPEAT button twice,
the REPEAT indicator will light.
Press the POWER button 1 to the
in position and slide the Function
switch 2 to the CD position and
insert a CD as described in the
TO INSERT A CD section on
page 6.
Press the PLAY/PAUSE button 1
to begin playback and the unit will
play the entire disc over and over
until the STOP (I) button 2 is
pressed.
NOTE:
To stop and cancel Repeat playback, press the STOP (I) button.
8
COMPACT DISC (CD) OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 32 TRACKS)
1
2
3
2
1
2
1
Press the PROGRAM button; the
PROGRAM indicator will blink.
Press the POWER button 1 to the
in position and slide the Function
switch 2 to the CD position. Insert
a CD as described in the TO
INSERT A CD section on page 6.
Use the SKIP/Search (o) 1 or
(n) 2 button to select the first
track to be programmed.
4
5
6
2
1
Press the PROGRAM button Repeat steps 3 and 4 to program
again; the selected track has now the other desired tracks in
been programmed and counted as sequence (up to 32 tracks).
program 1.
Press the PLAY/PAUSE (®p)
button to begin playback; the
Program indicator will light and
the tracks will play in the order
programmed.
NOTES:
•
•
•
Programming is the ability to preselect the order in which a series of tracks will be played.
Each track may be stored in the program memory as many times as desired (up to 32 tracks).
As each track is played, its track number will be displayed. You can move forward or backward through
the programmed tracks with the SKIP/Search o or n button.
•
•
•
The CD player will stop after all programmed tracks have been played or the STOP (I) button is
pressed.
To cancel programmed playback, press the STOP (I) button while in the stop mode, or open the CD
Door.
To check the program, press the PROGRAM button once more: "01" will appear in the display, then the
first selected track will blink in the display. Press the PROGRAM button again: "02" will blink in the
display, then the second selected track will blink in the display. Press PROGRAM button repeatedly to
check the other programmed tracks.
•
After you have selected 32 tracks (the last programmed memory) and press the PROGRAM button to
confirm, the display will show "01" for 1 second, then the first selected programmed track will blink in the
display.
9
CASSETTE OPERATION
PLAYING CASSETTE TAPES
Open Surface Side
1
2
3
2
1
3
Full Reel on Right
Insert a pre-recorded cassette into
the slots in the Cassette Door with the
open end facing up and the full reel
on the right side. Close the cassette
door.
Press the POWER button 1 to the
in position and slide the Function
switch 2 to the TAPE position, then
press the PLAY (¦) button 3 to
begin playback.
Press the STOP/EJECT (I)
button to open the cassette
compartment.
4
5
6
1
2
3
1
To advance or rewind the tape To pause playback momentarily,
Adjust the VOLUME control 1
rapidly, press either the F.FWD
(¦¦) 1 or REWIND (‹‹) 2
button. When you reach the
desired point, press the PLAY
(¦) button 3 to resume normal
playback.
press the PAUSE (p) button. The
tape movement stops but the tape
motor is still running. Press the
PAUSE (p) button again to
release pause and resume
normal playback.
and BBS button 2 as desired.
Press the BBS button 2 to the in
position to enhance the bass
sound.
7
8
9
To stop playback before the tape When the tape reaches the end,
ends, press the STOP/EJECT (I) the auto-stop mechanism
Press the POWER button to turn
the unit off, the Power indicator
will turn off.
activates, the PLAY (¦) button is
released and the tape motor
shuts off. Press the STOP/EJECT
(I) button to open the cassette
compartment and remove the
cassette.
button. The PLAY (¦) button is
released and the tape motor
shuts off.
10
CASSETTE OPERATION (CONTINUED)
MAKING A TAPE RECORDING
The tape recorder in this system allows you to make direct recordings from the radio or CD player to a blank
cassette in the tape compartment. An automatic recording volume level control (ALC) circuit will automatically
control the volume level of your recordings to prevent distortion. You may change the settings of the volume
or the Bass Boost during a tape recording, as these controls have no effect on the material being recorded
onto the tape.
To make a tape recording, proceed as follows:
1
2
3
Open Surface Side
2
1
Full Reel on Right
Open the Cassette Door and
insert a good quality blank
cassette tape into the slots on the
door, with the open end facing up
and the full reel on the right side.
Close the Cassette Door.
When you are ready to begin
recording, press the RECORD (Q)
Press the POWER button 1 to the
in position and slide the Function
switch 2 to select the function
you wish to record, either CD, AM
or FM, and operate that function
according to its own instructions.
b
utton. The PLAY (¦) button will
also engage. The tape will begin
moving and all of the material from
your selected source will be
recorded on the tape.
4
5
6
3
2
4
To avoid recording unwanted When you are finished recording, If you wish to listen to your
material, such as radio press the STOP/EJECT (I) recording immediately, press the
commercials, use the PAUSE (p) button to stop the tape.
button to stop the recording
temporarily. Release the PAUSE
(p) button to begin recording
again.
cassette REWIND (‹‹) button
1 until the tape rewinds to the
beginning, then press the
STOP/EJECT (I) button 2. Slide
the Function switch 3 to the
TAPE/POWER OFF position,
then press the PLAY (¦) button
4 to begin playback.
11
CARE AND MAINTENANCE
SAFEGUARD AGAINST ACCIDENTAL ERASURE
When a new recording is made, any program
material previously recorded is automatically
erased and only the new recording remains. To
safeguard valuable recordings from being erased
accidentally, the cassette and the deck are
equipped with a special device.
On the back of the cassette there is an erase
prevention tab on each side. To prevent
accidental erasing, break out these tabs with a
screwdriver. If only one side of the tape is to be
protected, break out the tab on the left side with
the side desired facing you.
E 1
Tab for side 2
Tab
S I D
Tab for side 1
To record on a tape in which the tab has been
broken, place a piece of adhesive tape over that
area.
Break out the tab
to prevent recording
NOTE: When a tab is broken out, the record
button cannot be depressed.
Cover with tape to record again
CASSETTE TAPE RECOMMENDATIONS
Standard tape lengths have 15 (C-30), 30 (C-60) and 45 (C-90) minutes of recording time on each side.
Longer length tapes of 60 (C-120) minutes of recording time on each side are not recommended. Use only
high quality tapes. If a problem develops, check the unit first with another cassette to determine if the
problem is with the cassette, and not with the unit.
If there is any slack in the tape in the cassette, it should be removed before inserting the cassette. Place a
pencil in one of the hubs and rotate clockwise until all slack is taken up.
12
CARE AND MAINTENANCE (CONTINUED)
Caring for Compact Discs
• Treat the compact disc carefully. Handle the compact disc
only by its edges. Never allow your fingers to come in contact
with the shiny, unprinted side of the compact disc.
• Do not attach adhesive tape, stickers, etc. to the disc label.
• Clean the compact disc periodically with a soft, lint-free,
dry cloth. Never use detergents or abrasive cleaners to
clean the compact disc. If necessary, use a CD cleaning
kit.
• If a disc skips or gets stuck on a section of the compact disc, it is probably dirty or damaged (scratched).
• When cleaning the compact disc, wipe in straight lines from the center of the compact disc to the outer
edge of the compact disc. Never wipe in circular motions.
Z
• This unit is designed to play only compact discs bearing the identification logo as shown here.
Other discs may not conform to the CD standard and may not play properly.
• Compact Discs should be stored in their cases after each use to avoid damage.
• Do not expose compact discs to direct sunlight, high humidity, high temperatures or dust, etc. Prolonged
exposure or extreme temperatures can warp the compact disc.
• Do not stick or write anything on either side of the compact disc. Sharp writing instruments, or the ink may
damage the surface.
Cleaning the Unit
• To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
• The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution
when cleaning and wiping the plastic parts.
• Mild soap and a damp cloth may be used on the front panel.
• Periodic cleaning of the tape heads, capstan and pinch roller is necessary to maintain good sound
reproduction. Clean them after every 100 hours of use or less if playback has deteriorated. Use a cotton
swab moistened with head cleaning solution or isopropyl alcohol, then wipe dry with another swab.
Erase
Head
R/P
Pinch Roller Head
Capstan
Cotton Swab
NOTE: Never use metal objects on or near the tape heads. Do not allow any cleaning material to fall into the
tape assembly.
13
TROUBLESHOOTING GUIDE
Should this unit exhibit a problem, check the following before seeking service:
Symptom
Radio
Possible Cause
Solution
Noise or sound distorted
on radio broadcasts.
Station not tuned properly for
AM or FM.
Retune the AM or FM broadcast
station.
FM: Telescopic antenna is not
properly adjusted.
Reorient FM telescopic antenna.
AM: Unit is not positioned
correctly.
Rotate unit until best reception is
obtained.
AM or FM, no sound.
Function switch not on AM or FM.
Volume at minimum.
Slide to select AM or FM.
Increase volume.
Cassette Player
No sound.
Volume at minimum.
Dirty head.
Increase volume.
Clean the head.
Sound distorted.
Speed varies.
Tape old or worn.
Batteries are low.
Replace the tape.
Replace the batteries.
Cassette Recorder
Will not record.
Erase prevention tab removed.
Defective tape or dirty tape head.
Cover hole with adhesive tape.
Replace tape or clean tape head.
Distorted sound
on playback.
Compact Disc Player
CD Player will not play.
Function switch not on CD.
Slide to the CD position.
CD is not installed or is installed
upside-down.
Insert CD with label side up.
CD skips while playing.
Disc is dirty or scratched.
Wipe disc with cloth or use
another disc.
General
No sound.
Power cord disconnected.
Connect power cord.
No batteries, dead batteries or batteries Insert fresh batteries properly.
not installed properly.
Power Is off.
Press the POWER button to the in
position to turn the unit on.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE
AT WWW.MEMOREXELECTRONICS.COM OR CONTACT CUSTOMER SERVICE AT
1-800-919-3647.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED
TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT 1-800-321-6993.
14
SPECIFICATIONS
GENERAL:
Power Source .............................................................................................120V,60Hz AC
Battery......................................................................12V DC (8 x 1.5V "C" Size batteries)
Alkaline is recommended for longer life
Speaker. ....................................................................................................2 x 5W 8 Ohms
Output Power................................................................................. 2 x 1.5W @ 10% THD
RADIO SECTION:
Frequency Range (FM).................................................................................88 - 108 MHz
Frequency Range (AM) .............................................................................530 -1710 KHz
CD SECTION:
Disc Diameter .............................................................................................4.72" (120mm)
3.15" (80mm) Single CD
Optical Source..................................................................................Semiconductor Laser
Specifications are subject to change without notice.
15
|