Memorex MD5585 User Manual

MD5585.O/M.QXD 6/12/02 8:52 AM Page 19  
PERSONAL AM/FM STEREO/COMPACT DISC  
PLAYER WITH 45 SECOND DIGITAL ANTI-SHOCK  
PROTECTION  
MODEL: MD5585  
BEFORE OPERATING THIS PRODUCT, PLEASE READ THESE  
INSTRUCTIONS COMPLETELY.  
OPERATING INSTRUCTIONS  
MD5585.O/M.QXD 6/12/02 8:52 AM Page 2  
SAFETY PRECAUTIONS (CONTINUED)  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in accordance with the  
manufacturer’s instructions.  
8. Do not install near any heat sources such as radiators, heat registers,  
stoves, or other apparatus (including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-type plug.  
A polarized plug has two blades with one wider than the other. A  
grounding type plug has two blades and a third grounding prong. The  
wide blade or the third prong are provided for your safety. If the provided  
plug does not fit into your outlet, consult an electrician for replacement of  
the obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at  
plugs, convenience receptacles, and the point where they exit from the  
apparatus.  
11. Only use attachments / accessories specified by the manufacturer.  
12. Unplug this apparatus during lightning storms or when unused for long  
periods of time.  
13. Refer all servicing to qualified service personnel. Servicing is required  
when the apparatus has been damaged in any way, such as power-  
supply cord or plug is damaged, liquid has been spilled or objects have  
fallen into the apparatus, the apparatus has been exposed to rain or  
moisture, does not operate normally, has changed its performance, or  
has been dropped.  
14. This appliance shall not be exposed to dripping or splashing water and  
that no object filled with liquids such as vases shall be placed on the  
apparatus.  
15. Do not overload wall outlet. Use only power source as indicated.  
16. Use replacement parts as specified by the manufacturer.  
17. The product may be mounted to a wall only if recommended by the  
manufacturer.  
18. Upon completion of any service or repairs to this product, ask the service  
technician to perform safety checks.  
2
MD5585.O/M.QXD 6/12/02 8:52 AM Page 3  
SAFETY PRECAUTIONS (CONTINUED)  
INFORMATION:  
This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates,  
uses, and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful interfer-  
ence to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment  
does cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the fol-  
lowing measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
• Do not open the CD compartment while the CD is rotating.  
• Always keep the CD compartment closed when not in use.  
• Keep all foreign objects out of the CD compartment.  
• Place the unit on a stable surface.  
• Avoid installing the unit in locations described below:  
• Places exposed to direct sunlight or close to heat radiating  
appliances such as electric heaters.  
• On top of other stereo equipment that radiates too much  
heat.  
• Placed lacking ventilation or dusty places.  
• Places subject to constant vibration.  
• Humid or moist places.  
3
MD5585.O/M.QXD 6/12/02 8:52 AM Page 4  
Dear Customer:  
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of  
your musical enjoyment. Now it’s time to consider how you can maximize the fun and  
excitement your equipment offers. This manufacturer and the Electronic Industries  
Association’s Consumer Electronics Group want you to get the most out of your equipment  
by playing it at a safe level. One that lets the sound come through loud and clear without  
annoying blaring or distortion and, most importantly, without affecting your sensitive  
hearing.  
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of  
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard  
against this by setting your equipment at a safe level BEFORE your hearing adapts.  
To establish a safe level:  
• Start your volume control at a low setting.  
• Slowly increase the sound until you can hear it comfortably and clearly, and without  
distortion.  
Once you have established a comfortable sound level:  
• Set the dial and leave it there.  
Taking a minute to do this now will help to prevent hearing damage or loss in the future.  
After all, we want you listening for a lifetime.  
We Want You Listening For A Lifetime  
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since  
hearing damage from loud noise is often undetectable until it is too late, this manufacturer  
and the Electronic Industries Association’s Consumer Electronics Group recommend you  
avoid prolonged exposure to excessive noise. This list of sound levels is included for your  
protection.  
Decibel  
Level  
Example  
30  
40  
50  
60  
70  
80  
Quiet library, soft whispers  
Living room, refrigerator, bedroom away from traffic  
Light traffic, normal conversation, quiet office  
Air conditioner at 20 feet, sewing machine  
Vacuum cleaner, hair dryer, noisy restaurant  
Average city traffic, garbage disposals, alarm clock at two feet  
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT  
EXPOSURE:  
We  
WantYou  
LISTENING  
90  
Subway, motorcycle, truck traffic, lawn mower  
Garbage truck, chain saw, pneumatic drill  
Rock band concert in front of speakers, thunderclap  
Gunshot blast, jet engine  
ForALifetime  
100  
120  
140  
180  
Rocket launching pad  
Information courtesy of the Deafness Research Foundation.  
4
MD5585.O/M.QXD 6/12/02 8:52 AM Page 5  
LOCATION OF CONTROLS  
9
1
2
10  
11  
12  
13  
3
4
5
6
7
14  
15  
8
16  
1. Display  
2. SKIP/SEARCH/Tuning – (  
11. PLAY/PAUSE (  
ON Button  
12. STOP (I)/ POWER OFF  
) /POWER  
)
/+ (  
) Buttons  
3. PROG. (Program) Button  
4. PRESET Up/Down Buttons  
5. LINE OUT Jack (Side of Unit)  
6. PHONES Jack (Side of Unit)  
7. VOLUME Control  
Button  
13. MODE Button  
14. Battery Compartment (Bottom  
of Unit)  
15. FUNCTION (CD/RADIO)  
Switch  
8. DBBS (Bass Boost) Switch  
9. DC 4.5V Jack (Rear of Unit)  
16. CD Door Open Button  
+
10. ESP/BAND Button  
5
MD5585.O/M.QXD 6/12/02 8:52 AM Page 6  
POWER SOURCES  
This CD player requires either two “AA” cell batteries (not included) or the  
AC adapter (not included).  
BATTERY INSTALLATION  
The battery indicator (  
batteries need replacing.  
) will appear in the CD display when the  
1. Open the battery compartment door on the  
bottom of the unit by sliding it out and then  
lifting it. To prevent the possibility of losing  
the cover, it cannot be removed.  
+
+
2. Insert two (2) “AA” cell batteries (not included)  
according to the polarity diagram inside the  
battery compartment. Alkaline batteries are  
recommended for the longest playing time.  
+
BATTERY PRECAUTIONS  
Follow these precautions when using batteries in this device:  
1. Use only the size and type of batteries specied.  
2. Be sure to follow the correct polarity when installing the batteries as indicated next to the battery  
compartment. Reversed batteries may cause damage to the device.  
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with  
fresh ones.  
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or  
injury from possible battery leakage.  
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.  
(Follow battery manufacturer’s directions.)  
AC OPERATION  
To operate the unit using AC power, connect the AC adapter (not included)  
to an AC outlet having 120V, 50/60Hz AC only. Plug the small end into the  
DC 4.5V jack on the unit and connect the other end into the AC outlet. The  
batteries are automatically disconnected when the AC adapter is used.  
CAUTION: When not using AC power, disconnect the AC adapter from  
the wall outlet by pulling the plug (not the cord). Do not touch the AC  
adapter with wet hands. Fully insert the plug without exposing any part of  
the blade.  
+
DC 4.5V  
6
MD5585.O/M.QXD 6/12/02 8:52 AM Page 7  
RADIO OPERATION  
TO LISTEN TO THE RADIO  
1
2
2
2
3
1
1
Set the VOLUME control to minimum  
and plug the headphone into the PHONES  
Slide the FUNCTION switch to the  
RADIO position. Press the ESP/BAND  
button to select a band (AM or FM).  
If listening to FM, press the MODE button  
to turn FM Stereo ON or OFF.  
jack. Press the PLAY/PAUSE  
)
(
/POWER ON button to turn the unit on.  
3
4
3
2
1
1
2
Press and release the SKIP/SEARCH/ Adjust the VOLUME control and DBBS  
switch as desired. If FM STEREO  
reception is weak/noisy, press the MODE  
button to turn off Stereo, in this case  
the reception will be monaural.  
Tuning –  
tune a station. Press and hold the  
SKIP/SEARCH/Tuning – or +  
button for rapid search tuning.  
or +  
button to  
ANTENNAS  
5
AM – This unit has a built-in ferrite bar  
antenna, which provides adequate reception  
in most areas. If reception is weak, turn the  
unit to improve reception.  
FM – The headphones act as an antenna for  
FM. Extend the headphone wire for best FM  
reception.  
To turn the radio off, press the STOP  
(I)/POWER OFF button.  
AUTO SCAN  
Press and hold the SKIP/SEARCH/Tuning –  
or +  
button for approximately 1  
second and the unit will automatically search  
for the next available station.  
7
MD5585.O/M.QXD 6/12/02 8:52 AM Page 8  
RADIO OPERATION (CONTINUED)  
TO SET AND RECEIVE A STATION INTO MEMORY  
1
2
1
3
While the PROG. indicator is blinking,  
select the desired preset using the  
PRESET UP or DOWN button , then  
press the PROG button to set the  
memory.  
Tune a desired station as described in  
the previous section. Press the  
PROG. button; the PROG. indicator  
and preset number will blink in the  
display.  
3
2
1
To receive a preset station, simply  
press the PRESET UP or DOWN  
button to select the desired preset.  
Radio Sound Through a Home Audio System  
By using a home audio connection cable (not included), superb radio sound can  
be heard through your home audio system. Before making any connections, turn  
off the power to all equipment.  
Plug a connection cable (not included) between the LINE OUT jack on the side of  
the CD player and the amplier’s AUX or CD input jack. (Do not connect it to the  
amplier’s PHONO jack.)  
NOTE: If the radio interferes with TV reception, move the unit away from the TV or  
turn off the power to this unit.  
8
MD5585.O/M.QXD 6/12/02 8:52 AM Page 9  
CD OPERATION  
TO REMOVE A CD  
TO INSERT A CD  
1
1
Open the CD compartment lid by Make sure the CD has stopped and  
sliding the CD Open switch to the open the CD compartment lid by  
right. Gently press a disc, label side sliding the CD Open switch to the right.  
up, onto the spindle until it locks in Hold the edge and gently press the  
place. Close the CD compartment lid.  
center pivot, then pick up the disc.  
BASS BOOST  
TURNING POWER ON /OFF  
1
1
1
2
To emphasize the bass, slide the To turn the unit on, press the  
DBBS switch to the ON position. For  
normal bass, slide the DBBS switch to  
the OFF position.  
PLAY/PAUSE (  
button .  
To turn unit off, Press the STOP (I)  
)/POWER ON  
/POWER OFF button .  
AUTO POWER OFF  
When the unit is stopped (Standby mode) for approximately 1 minute, the power  
will automatically turn off.  
9
MD5585.O/M.QXD 6/12/02 8:52 AM Page 10  
CD OPERATION (CONTINUED)  
TO PLAY A CD (STANDARD CD, CD-R or CD-RW)  
This unit is capable of playing standard CDs, as well as CD-R and CD-RW.  
It CANNOT play MP3 files.  
2
1
Insert a CD as described on the While the unit is off, press the  
previous page. Insert headphones into  
the PHONES jack. Slide the  
FUNCTION switch to the CD position.  
PLAY/PAUSE (  
button to start playback. To pause  
PLAYBACK, press the PLAY/PAUSE  
)/POWER ON  
(
)/POWER ON button again, the  
display will blink.  
4
3
4
3
1
2
Adjust the VOLUME control and When the disc is through playing, it will  
stop. Press the STOP (I)/POWER  
OFF button to stop the disc before it is  
nished; the total number of tracks and  
playing time will appear. Press the  
STOP (I)/POWER OFF button again  
while in the stop mode or wait  
approximately 60 seconds to turn the  
unit off.  
DBBS switch as desired. To skip  
forward or backward through the tracks  
on the disc, press the SKIP/SEARCH –  
or +  
button . To search  
forward or backward through the tracks  
on the disc, press and hold the  
SKIP/SEARCH –  
or +  
button .  
10  
MD5585.O/M.QXD 6/12/02 8:52 AM Page 11  
CD OPERATION (CONTINUED)  
NOTES:  
• This unit is capable of playing standard size CDs or 3” singles; no adapter is required.  
• If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will  
show “no disc”.  
• As each track is played, the track number and elapsed time are shown in the display.  
• To remove the disc, open the CD Compartment, hold the edge of the CD and gently  
press the center pivot and lift the CD.  
• The maximum time of a CD is 74 minutes for this unit.  
ELECTRONIC ANTI-SHOCK SYSTEM  
This CD player has a built-in Anti-Shock System that cuts down on CD skipping,  
which is useful when using the CD player in the car. Follow the steps below to  
activate and understand the Anti-Shock System.  
2
1
Insert a CD as described in the TO With a CD inserted, press the  
INSERT A CD section and slide the  
FUNCTION switch to the CD position.  
PLAY/PAUSE (  
button to turn the unit on.  
)/POWER ON  
4
3
The Anti-Shock System will start Within a few seconds, the Anti-Shock  
automatically, the sound will mute for indicator will fill to indicate music  
a moment and the display will show signals are stored in memory.  
the Anti-shock indicator with no bars  
in it.  
CONTINUED ON THE NEXT PAGE  
11  
MD5585.O/M.QXD 6/12/02 8:52 AM Page 12  
CD OPERATION (CONTINUED)  
6
5
If the CD player is subject to vibration If all the bars disappear and the CD  
during playback, the bars will player is subject to immediate vibration,  
disappear one by one. During the the unit may skip.  
vibration, the music should continue to  
play the signals stored in the memory  
until the CD player can read the music  
data properly from the disc. At this  
time, the indicator will probably show  
fewer bars indicating the music signals  
stored in memory are low.  
8
7
If no more vibration occurs, the To turn the Anti-Shock System off,  
music signals are once again stored press the ESP/BAND button.  
into the memory and the indicator To turn the Anti-Shock System on,  
returns to full. When the memory is press the ESP/BAND button again.  
full, the top bar will blink and the  
disc rotation speed will drop to save  
power consumption.  
NOTES:  
When the CD player is used in a stable location, turn the Anti-Shock System  
off by pressing the ESP/BAND button. When the Anti-Shock System is Off,  
battery consumption is less.  
The Anti-Shock System provides for continuous sound output when unit is  
subject to vibration, but it will not correct errors, such as a defective dirty CD.  
12  
MD5585.O/M.QXD 6/12/02 8:52 AM Page 13  
CD OPERATION (CONTINUED)  
TO REPEATEDLY PLAY BACK ONE TRACK  
2
1
1
2
2
1
3
With a CD inserted, press the The unit will then play the same track  
over and over until the STOP  
(I)/POWER OFF button is pressed.  
Adjust the VOLUME control and  
DBBS switch as desired.  
PLAY/PAUSE (  
button to turn the unit on. Press the  
MODE button once; the Repeat 1  
)/POWER ON  
indicator  
will appear in the display.  
TO REPEATEDLY PLAY BACK ALL TRACKS  
1
2
1
2
2
1
3
With a CD inserted, press the  
PLAY/PAUSE ( )/POWER ON  
The unit will then play all the tracks on  
the CD over and over until the STOP  
(I)/POWER OFF button is pressed.  
Adjust the VOLUME control and  
DBBS switch as desired.  
button to turn the unit on. Press the  
MODE button twice; the Repeat All  
ALL  
indicator  
display.  
will appear in the  
TO CANCEL OR STOP REPEAT PLAYBACK  
TO STOP REPEAT PLAYBACK, press the STOP (I)/POWER OFF button once.  
TO CANCEL REPEAT PLAYBACK, press the MODE button so that the  
Repeat 1 or Repeat ALL indicator disappears in the display. The unit will  
continue normal playback.  
13  
MD5585.O/M.QXD 6/12/02 8:52 AM Page 14  
CD OPERATION (CONTINUED)  
INTRO PLAY  
2
1
1
4
2
2
3
3
With a CD inserted, press the  
PLAY/PAUSE (  
button to turn the unit on and press  
Press the PLAY/PAUSE (  
)/POWER ON ON button to begin playback. The unit  
)/POWER  
will play the first 10 seconds of each  
the STOP (I)/POWER OFF button track. Adjust the VOLUME control ❷  
to stop auto playback. Press the and DBBS switch as desired. Press  
MODE button 3 times; the INTRO  
the STOP (I)/POWER OFF button ❹  
indicator will blink in the display.  
to stop Intro playback.  
TO RANDOMLY PLAY BACK A CD  
1
2
1
4
2
2
3
3
With a CD inserted, press the  
PLAY/PAUSE (  
button to turn the unit on and press  
Press the PLAY/PAUSE (  
)/POWER ON ON button to begin playback. The  
)/POWER  
unit will play all the tracks in random  
the STOP (I)/POWER OFF button order. Adjust the VOLUME control ❷  
to stop auto playback. Press the and DBBS switch as desired. When  
MODE button 4 times; the RAND  
indicator will blink in the display.  
all the tracks have been played, the  
unit will stop. Press the STOP  
(I)/POWER OFF button to stop  
Random playback.  
14  
MD5585.O/M.QXD 6/12/02 8:52 AM Page 15  
CD OPERATION (CONTINUED)  
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)  
2
1
1
2
3
1
3
With  
PLAY/PAUSE  
a
CD inserted, press the  
)/POWER ON  
(
Select the first track to be played back  
using the SKIP/SEARCH – or +  
button , then press the PROG.  
button again. Repeat this step to  
program additional tracks up to a  
maximum of 24 tracks.  
button to turn the unit on and press  
the STOP (I)/POWER OFF button to  
stop auto playback. Press the PROG.  
button ; the PROG indicator will  
appear in the CD display.  
4
3
1
2
1
2
3
To skip forward or backward through  
the programs, press the SKIP/SEARCH  
Press the PLAY/PAUSE  
/POWER ON button to begin  
(
)
or +  
button . When the  
Program playback and adjust the  
VOLUME control and DBBS switch disc is through playing, it will stop.  
as desired.  
NOTES:  
Press the STOP (I)/POWER OFF button to stop the disc before it is nished.  
As each program is played, the track number is shown in the display.  
To clear the memorized program: press the STOP (I)/POWER OFF button  
again while in the stop mode, wait approximately 60 seconds and the unit will turn  
off or open the CD compartment.  
Programming is the ability to preselect the order in which a series of tracks  
will be played.  
Each track may be stored in the program memory as many times as desired  
(up to 24 tracks).  
15  
MD5585.O/M.QXD 6/12/02 8:52 AM Page 16  
CARE AND MAINTENANCE  
Caring for Compact Discs  
Treat the compact disc carefully. Handle the  
compact disc only by its edges. Never allow your  
ngers to come in contact with the shiny,  
unprinted side of the compact disc.  
Do not attach adhesive tape, stickers, etc. to  
the compact disc label.  
Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use  
detergents or abrasive cleaners to clean the compact disc. If necessary, use a  
CD cleaning kit.  
If a compact disc skips or gets stuck on a section of the disc, it is probably dirty  
or damaged (scratched).  
Z
COMPACT  
When cleaning the compact disc, wipe in straight lines from the  
center of the compact disc to the outer edge of the compact disc.  
Never wipe in circular motions.  
DIGITAL AUDIO  
This unit is designed to play only compact discs bearing the identification logo  
as shown here. Other compact discs may not conform to the CD standard and  
may not play properly.  
Compact discs should be stored in their cases after each use to avoid  
damage.  
Do not expose compact discs to direct sunlight, high humidity, high  
temperatures, or dust, etc. Prolonged exposure or extreme temperatures can  
warp the compact disc.  
Do not stick or write anything on either side of the compact disc. Sharp writing  
instruments, or the ink may damage the surface.  
Cleaning the unit  
To prevent re or shock hazard, disconnect your unit from the AC power  
source when cleaning.  
The nish on your unit may be cleaned with a dust cloth and cared for as other  
furniture. Use caution when cleaning and wiping the plastic parts.  
Mild soap and a damp cloth may be used on the front panel.  
16  
MD5585.O/M.QXD 6/12/02 8:52 AM Page 17  
TROUBLESHOOTING GUIDE  
If you experience a problem with this unit, check the chart below before  
calling for service.  
SYMPTOM  
Unit will not  
turn on.  
CAUSE  
SOLUTION  
Weak or dead batteries Replace batteries and insert  
or inserted incorrectly. correctly.  
Weak or dead Re-  
chargeable batteries.  
AC adapter  
not connected.  
CD compartment  
not closed.  
Recharge or replace  
batteries.  
Check AC adapter  
connection.  
Disc will not play.  
Close CD compartment.  
Disc inserted  
Reinsert disc correctly.  
incorrectly.  
Dirty or defective disc Try another disc.  
Moisture condensation Wipe disc with soft  
on disc.  
cloth.  
Unit will not play MP3. Unit is not capable of  
playing MP3.  
Insert a standard CD or CD-R.  
Erratic CD playback.  
Dirty or defective  
disc.  
Clean or replace disc.  
No sound from  
headphones.  
Headphone  
plug not inserted  
correctly.  
Reinsert headphone  
plug correctly.  
VOLUME control  
set to minimum.  
Weak batteries.  
Defective disc.  
ESP is not activated.  
Station not tuned  
Increase volume.  
Replace batteries.  
Try another disc.  
Press the ESP/BAND button.  
Retune AM or FM  
ESP not working.  
Noise or sound  
distorted on radio.  
properly for AM or FM  
.
broadcast station.  
FM: Headphone wire  
not extended.  
Extend Headphone wire.  
AM: Unit is not  
Rotate unit until best  
reception is obtained.  
Retune station.  
Press MODE button to turn  
Stereo on.  
positioned correctly.  
Poor FM signal.  
FM MODE button  
not set to Stereo.  
FM STEREO indicator  
does not light.  
No sound.  
FUNCTION switch is not Set FUNCTION switch to the  
in the desired position. desired function.  
17  
MD5585.O/M.QXD 6/12/02 8:52 AM Page 18  
Memcorp, Inc.  
Weston, Fl  
Printed in Hong Kong  

Nokia 3205 User Manual
Hitachi Travelstar HTS725025A9A361 User Manual
Eton SOUND101 User Manual
Echo Bear Cat CHF9540H User Manual
Echo Bear Cat 71854 User Manual
Clarion DXZ665MP User Manual
Bookendz BE MBP15F User Manual
Belkin F1DC108C US User Manual
Analog Devices High Efficiency Synchronous Step Down Switching Regulators ADP1148 33 User Manual
Airlink101 AWLL5088 User Manual