share.
capture.
USB Flash Drive
Quick Start Guide
Thank you for purchasing a Memorex USB Flash Drive. Your Flash
Drive is a multi-purpose and universally compatible Portable Storage
Device.
GETTING STARTED:
Step 1 – Check your Operating System (OS):
• For Windows® Me, Windows® 2000, and Windows® XP
There is no need to install any drivers! Go straight to Step 2- “Using
Your Flash Drive.”
• For Windows® 98SE (internet access required)
You need to install a USB 2.0 driver for the computer to recognize
the Flash Drive. See “Windows® 98SE Users” below.
• For Windows® NT—NT does not support USB. The Flash Drive is
not supported in this OS.
• For Windows 98® or older – Windows® operating systems prior to
Windows® 98SE do not have adequate USB support, and the
Flash Drive is therefore not supported for use by those operating
systems.
• For Apple Macintosh Mac OS 8.6 or higher (8.6 - 9.x USB 1.1 support only)
There is no need to install any drivers! Go straight to Step 2.
Windows® 98SE Users: (Internet access required @ www.memorex.com)
Note: Do not insert your USB Flash Drive into your USB port until you have successfully
completed steps a. through f. below.
a. Turn on your computer and wait for the Windows desktop to appear.
b. Close any applications you may have running.
c. Download the necessary driver by launching your internet browser
and going to the Memorex website at
• Select DOWNLOAD SOFTWARE, under General Support and
Software.
• Under "Hardware", Choose other USB Flash Drives.
• Under "Now select your Product" on the right side, select the
model you have.
• Select Download File once you have determined the appropriate
Driver.
• When the download dialogue box appears, click on SAVE.
• Choose or create a folder on your computer's desktop in which
you want to save the downloaded driver. You will install the driver
from this folder after it has been downloaded.
• Once the download is complete, click on CLOSE and exit the
website.
d. Go to the folder where you saved the zip file. Using the winzip
program, unzip the file into the same folder. If winzip is not installed,
been unzipped, double-click on the setup.exe application to begin the
installation.
• A Welcome dialogue box will pop up to give you the option of
installing the drivers. Click on NEXT.
• A Setup Status screen will appear confirming the installation
process has begun. Once completed, a "Restarting Windows"
dialogue box will appear.
• Choose "Yes, I want to restart my computer now" and click OK to
reboot your computer to complete the driver installation process.
e. Your Memorex USB Flash Drive is now ready to use. When you
insert the drive into an available USB port on your computer, your
system will identify the drive, locate the driver software, and complete
the driver installation process.
Step 2 – Using Your FlashDrive:
Your new Memorex USB Flash Drive is ready to use now. Follow the
simple steps below to begin using your new portable storage device:
a. Remove the protective snap-on cap and insert your new
Flash Drive into an available USB port on your computer.
Note: You may be required to wait a few minutes while your new Flash Drive is configuring
itself to your computer system. (Click "OK" or "Agree" to any driver prompts should they
appear).
b. Restart your computer now to ensure driver installation and
drive setup.
c. At the desktop screen double-click on “My Computer.” The
Flash Drive should appear as a “Removable Disk” icon. The actual
drive letter assigned to your Flash Drive will vary depending on how
many other drives are on your system.
You are ready to begin using your new Memorex USB Flash Drive.
Congratulations!
Important Note: Do not remove the USB Flash Drive while the LED is flashing!
Interrupting the data flow while the LED is flashing can potentially corrupt existing data
that is being transferred as well as other data stored on the drive. You may also potentially
lose access to your drive and your ability to retrieve any files stored on the USB Flash
Drive. Once the LED returns to an unblinking state, the data transfer operation is
complete; and it is safe to remove your drive.
Using the Write Protection Switch
Your USB Flash Drive is equipped with an external Write-Protection
switch. The switch is located on the side of the drive. Sliding the write
protection switch to the left or towards the “lock” icon position
,
prevents any data writing or accidental erasure of critical files. Sliding
the switch back to the right towards the unlock symbol
to be written to or from the USB Flash Drive normally.
allows data
TECHNICAL ASSISTANCE
Should you require assistance or have questions regarding your
Memorex USB Flash Drive, you can find answers on our website at
toll free at 877 – Is it live (877-474-8548)
Important Note: Although your USB Flash Drive is compatible with either a USB 2.0 or
USB 1.1 port, performance is maximized when using a USB 2.0 port. Transfer speeds will
vary and differ significantly when connected to USB 1.1 port. Actual read and write speeds
may vary depending on file types, OS, etc.
© 2006 Memorex Products, Inc.
53958662
|