Melitta ME1MSB User Manual

Melitta_ME1MSB_IB_7-12-06 12/7/06 2:44 PM Page 1  
LIMITED ONE-YEAR WARRANTY  
Warranty Coverage: This product is warranted to be free from defects in materials or  
workmanship for a period of one (1) year from the original purchase date. This product  
warranty is extended only to the original consumer purchaser of the product and is not  
transferable. For a period of one (1) year from the date of original purchase of the  
product, our Repair Center will, at its option, either (1) repair the product or (2) replace  
the product with a reconditioned comparable model. These remedies are the  
purchaser’s exclusive remedies under this warranty.  
Warranty Service: To obtain warranty service, you must call our warranty service  
number at 1-800-233-9054 for return instructions on how to deliver the product, in either  
the original packaging or packaging affording an equal degree of protection to the  
Repair Center specified below. You must enclose a copy of your sales receipt or other  
proof of purchase to demonstrate eligibility for warranty coverage.  
To return the appliance, ship to:  
To contact us, please write to, call, or email:  
ATTN: Repair Center  
708 South Missouri Street  
Macon, MO 63552 USA  
Consumer Relations Department  
PO Box 7366  
Columbia, MO 65205-7366 USA  
Phone: 1-800-233-9054  
What Is Not Covered: This warranty does not cover damage resulting from misuse,  
accident, commercial use, improper service or any other damage caused by anything  
other than defects in material or workmanship during ordinary consumer use. This  
warranty is invalid if the serial number has been altered or removed from the product.  
This warranty is valid only in the United States and Canada.  
LIMITATION ON DAMAGES: THERE SHALL BE NO LIABILITY FOR ANY  
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS  
OR IMPLIED WARRANTY OR CONDITION ON THIS PRODUCT.  
DURATION OF IMPLIED WARRANTIES: EXCEPT TO THE EXTENT PROHIBITED  
BY APPLICABLE LAW, ALL IMPLIED WARRANTIES AND CONDITIONS, INCLUDING,  
WITHOUT LIMITATION, IMPLIED WARRANTIES AND CONDITIONS OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR USE ON  
THIS PRODUCT ARE LIMITED IN DURATION TO THE DURATION OF THIS  
WARRANTY.  
Some jurisdictions do not allow the exclusion or limitation of incidental or consequential  
damages, or allow limitations on how long an implied warranty lasts, so the above  
limitations or exclusions may not apply to you. This warranty gives you specific legal  
rights and you may have other rights under the laws of your jurisdiction.  
SMART MILL & BREW  
10-Cup Coffee Maker  
®
with MSN Direct  
Region Specific Weather Information  
'2006 All rights reserved.  
Made in China  
8/06  
Model ME1MSB  
Melitta_ME1MSB_IB_7-12-06 12/7/06 2:44 PM Page 5  
Symptom  
Possible Solutions  
Welcome  
Coffee is too weak  
or too strong  
See Coffee Brew Chart below.  
Coffee Brew Chart  
Weaker  
Stronger  
Grind  
Coarser  
Finer  
Coffee Beans  
Water  
Use less  
Add more  
Add more  
Use less  
*Do not use less than 4 (5-oz.) cups of water.  
*Do not exceed 10 (5-oz.) cups of water and 8 scoops  
of whole bean coffee. (1 scoop = 1 tablespoon)  
NOTE: This chart is to be used as a general guide.  
Adjust coffee, water and grind to suit your  
individual taste.  
Thank you for your purchase of the Smart Mill & Brew™ 10-Cup  
®
Coffee Maker featuring MSN Direct region specific weather  
®
information -- Melittas perfect way to begin and plan your day.  
There is water on the  
countertop behind the  
Coffee Maker  
Do not overfill the Water Reservoir.  
Do not exceed 10 (5-oz.) cups  
of water.  
For easy access to information in this Owners Manual, follow the  
sectioned tabs on the pages listed below.  
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
1
Remove the animated  
sleeping cat from the  
LCD Display  
Press MENU Button and change  
Sleep Mode to OFF.  
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . 2 - 4  
Quick Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 6  
Controls & Features . . . . . . . . . . . . . . . . . . . . . . . . 7 - 12  
Brewing Instructions . . . . . . . . . . . . . . . . . . . . . . . . 13 - 18  
Weather Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 - 22  
User Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 23 - 24  
Definition of Terms . . . . . . . . . . . . . . . . . . . . . . . . . 25 - 26  
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 - 29  
28  
1
Melitta_ME1MSB_IB_7-12-06 12/7/06 2:44 PM Page 7  
IMPORTANT SAFEGUARDS  
Trouble Shooting  
When using electrical appliances, basic safety precautions  
should always be followed, including the following:  
Symptom  
Possible Solutions  
Visit the msn website at:  
to make sure there is FM signal  
coverage in your area or  
please call 1-800-459-8060 for  
further assistance.  
1. Read all instructions.  
2. Do not touch hot surfaces. Use handles or knobs.  
3. To protect against electric shock, do not place cord, plugs,  
or appliance in water or other liquid.  
4. Close supervision is necessary when any appliance is used  
by or near children.  
NO SIGNAL  
PLEASE  
CALL  
1-800-459-  
8060  
5. Unplug from outlet when not in use and before cleaning.  
Allow to cool before putting on or taking off parts, and  
before cleaning the appliance.  
6. Do not operate any appliance with a damaged cord or  
plug or after the appliance malfunctions, or has been  
damaged in any manner. Contact Consumer Service for  
examination, repair or adjustment.  
The Coffee Maker will not operate  
without the Lid being closed  
properly. Replace the Coffee Mill  
Lid and operation will resume.  
7. The use of an accessory not evaluated for use with this  
appliance may cause injuries.  
8. Do not use outdoors.  
9. Do not let cord hang over edge of table or counter, or touch  
hot surfaces.  
Unit will not brew coffee  
The Coffee Mill Assembly must  
be placed properly in the Brew  
Chamber and the Coffee Maker  
Lid must be closed securely.  
10. Do not place on or near a hot gas or electric burner, or in a  
heated oven.  
11. To disconnect, remove plug from wall outlet.  
Power Failure  
Unplug the Coffee Maker until  
power is re-established.  
12. Do not use appliance for other than intended use.  
13. Be certain Lids are securely in place before operating  
appliance.  
14. Scalding may occur if the Lids are removed during the  
brewing cycle.  
15. The Carafe is designed for use with this appliance. It must  
never be used on a range top.  
16. Do not set a hot Carafe on a wet or cold surface.  
Overlapping FM Coverage  
The Coffee Maker will auto-  
matically select data from the FM  
tower signal that is strongest.  
In the event of a local Weather or  
Amber Alert, consult a trusted TV,  
radio or internet station.  
17. Do not use a cracked Carafe or a Carafe having a loose or  
weakened handle.  
18. Do not clean Carafe with cleansers, steel wool pads, or  
other abrasive material.  
19. Check Filter Basket for presence of foreign objects  
before using.  
Temperatures are in ºC  
Visibility miles are in km  
Press MENU Button and change  
METRIC FORMAT to ºF.  
Press MENU Button and change  
METRIC FORMAT to miles.  
SAVE THESE INSTRUCTIONS  
For Household Use Only  
2
27  
Melitta_ME1MSB_IB_7-12-06 12/7/06 2:44 PM Page 9  
Visibility  
ADDITIONAL IMPORTANT  
SAFEGUARDS  
The distance at which a given standard object can be seen and  
identified with the unaided eye.  
WARNING: This appliance generates heat and escaping  
steam during use. Proper precautions must be taken  
to prevent the risk of burns, fires, or other injury to  
persons or damage to property.  
Probability of Precipitation (PoP)  
PoP Percent  
10%  
Expressions of Uncertainty  
slight chance or none  
slight chance  
1. All users of this appliance must read and understand this  
Owners Manual before operating or cleaning this appliance.  
2. The cord to this appliance should be plugged into a  
120V AC electrical outlet only.  
20%  
30-40-50%  
60-70%  
chance  
likely  
3. Use water only in this appliance! Do not put any other liquids  
or food products in this appliance. Do not mix or add anything  
to the water placed in this appliance, except as instructed in  
the User Maintenance Instructions to clean the appliance.  
4. DO NOT attempt to move an appliance containing hot liquids.  
Allow appliance to cool completely before moving.  
5. Keep appliance at least 4 inches away from walls or other  
objects during operation. Do not place any objects on top of  
appliance while it is operating. Place the appliance on a  
surface that is resistant to heat.  
6. If this appliance begins to malfunction during use, immediately  
unplug the cord. Do not use or attempt to repair the  
malfunctioning appliance.  
80-90-100%  
(none used)  
Winds  
If the Sustained Wind Speed is 20-30 mph, the term “Windy” may  
be applied. The numbers may vary in other parts of the country due  
to such variables as terrain and elevation.  
What is an AMBER Alert?  
The AMBER Alert Plan is a voluntary partnership between law-  
enforcement agencies and broadcasters to activate an urgent  
bulletin in the most serious child-abduction cases.  
7. If this appliance falls or accidentally becomes immersed in  
water or any other liquid, unplug it immediately. Do not reach  
into water! Do not use this appliance after it has fallen  
into or has become immersed in water. Contact  
Consumer Service for examination and repair.  
8. Do not leave this appliance unattended during use.  
9. The appliance must be left to cool down sufficiently before  
adding more water to avoid spattering.  
Broadcasters use the Emergency Alert System (EAS), formerly called  
the Emergency Broadcast System, to air a description of the  
missing child and suspected abductor.  
This is the same concept used during severe weather emergencies.  
The goal of the AMBER Alert is to instantly galvanize the entire  
community to assist in the search for and safe return of the child.  
Alert information is put together for public distribution. This  
information can include descriptions and pictures of the missing  
child, the suspected abductor, a suspected vehicle, and any other  
information available and valuable to identifying the child and  
suspect.  
10. Always use fresh, cool water in your appliance. Warm water or  
other liquids, except as listed in the Care and Cleaning  
section, may cause damage to the appliance.  
11. DO NOT put Carafe into a microwave.  
Amber Alerts in and around your area.  
CAUTION: To prevent injury when utilizing Pause & Pour  
(drip-stop) feature, replace Carafe within 20 seconds of  
removing during brewing process.  
12. Make sure that the Filter Basket and Filter Basket Lid are  
securely assembled into the appliance before use.  
*Terms and information provided by the National Weather Service.  
13. Only coffee beans and coffee grounds should be placed into  
the Filter Basket.  
26  
3
Melitta_ME1MSB_IB_7-12-06 12/7/06 2:44 PM Page 11  
*
ADDITIONAL IMPORTANT  
Definition of Terms  
SAFEGUARDS (Continued)  
BE PREPARED FOR HAZARDOUS WEATHER  
CAUTION: BLADES ARE SHARP. DO NOT ATTEMPT TO  
DISASSEMBLE COFFEE MILL ASSEMBLY.  
WARNING: To avoid serious injury, never place fingers  
or objects at the bottom of the Filter Basket.  
WARNING: To avoid scalding and burns, do not open  
the Filter Basket Lid until all liquid has emptied into  
the Carafe. Always allow the Coffee Maker to cool  
for 15 minutes before brewing another Carafe of  
coffee. Use caution; coffee grounds are hot after  
brewing.  
WATCH = Be alert!  
WARNING = Take action!  
Understanding Weather Alerts  
Weather Advisory  
An advisory is for less serious conditions that cause significant  
inconvenience and, if caution is not exercised, could lead to situations  
that may threaten life and/or property.  
Weather Watch  
Polarized Plug  
A watch is used when the risk of a hazardous weather event has  
increased significantly, but its occurrence, locations, and/or timing is  
still uncertain. It is intended to provide advance notice of possible  
inclement weather.  
This appliance has a polarized plug (one blade is wider than the  
other). To reduce the risk of electric shock, this plug is intended  
to fit into a polarized outlet only one way. If the plug does not  
fit fully in the outlet, reverse the plug. If it still does not fit, contact a  
qualified electrician. Do not attempt to modify the plug in any way.  
Weather Warning  
A warning is used for conditions posing an immediate threat to  
life or property. Depending on the type of warning, you should take  
immediate, appropriate action.  
Short Cord Instructions  
A short power-supply cord is provided to reduce the risk resulting from  
becoming entangled in or tripping over a longer cord.  
Do not use an extension cord with this product.  
Ultraviolet Index  
This index provides important information to help you plan your  
outdoor activities in ways that prevent overexposure to the sun's rays.  
It was designed by the National Weather Service (NWS) and the  
Environmental Protection Agency (EPA).  
Plasticizer Warning  
CAUTION: To prevent Plasticizers from migrating to the finish of the  
counter top or table top or other furniture, place NON-PLASTIC  
coasters or place mats between the appliance and the finish of the  
counter top or table top.  
Category  
UV  
Time  
Actions to Take  
Index  
to Burn**  
Failure to do so may cause the finish to darken. Permanent blemishes  
may occur or stains can appear.  
Minimal  
Low  
0 - 2  
3 - 4  
5 - 6  
7 - 9  
60 min.  
45 min.  
30 min.  
Apply SPF sunscreen.  
Apply SPF sunscreen, wear a hat.  
Apply SPF 15, wear a hat.  
Electric Power  
Moderate  
High  
If the electrical circuit is overloaded with other appliances, your  
appliance may not operate properly. It should be operated on a  
separate electrical circuit from other appliances.  
15 - 24 min. Apply SPF 15 to 30, wear a hat  
& sunglasses.  
Limit midday exposure.  
WARNING  
Very High  
10+  
10 min.  
Apply SPF 30; wear a hat,  
sunglasses, and protective  
clothing; limit midday exposure.  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT  
REMOVE THE BOTTOM COVER. NO USER-SERVICEABLE  
PARTS INSIDE. REPAIR SHOULD BE DONE BY AUTHORIZED  
SERVICE PERSONNEL ONLY.  
**PLEASE NOTE: All skin types are different. This chart is to be used as  
a guide only. Please use caution whenever you are unprotected from  
the sun’s rays.  
4
25  
Melitta_ME1MSB_IB_7-12-06 12/7/06 2:44 PM Page 13  
7. Press the ON/OFF Button to turn the Coffee Maker ON again.  
Allow the vinegar/water solution to cycle through the Coffee  
Maker. When the brew cycle is finished, press the ON/OFF  
Button to turn the Coffee Maker OFF and discard the  
vinegar/water solution.  
Quick Start: Plug & Play  
®
MSN Direct constantly streams both time and region-specific weather  
information to more than 120 cities in North America.  
NO set-up, NO subscription, NO internet connection is  
necessary to receive the most up-to-the-minute time and weather  
information. All data is updated constantly, 24/7 via a regional  
FM signal.  
8. To rinse: Allow the Coffee Maker to cool for 15 minutes. Fill the  
Carafe with cold fresh water. Pour the water into the Water  
Reservoir. Replace the Carafe onto the Warming Plate and press  
the ON/OFF Button. When the brew cycle is complete discard  
the water. Repeat with another Carafe of fresh water. Discard the  
rinse water.  
1. Carefully unpack your Coffee Maker. Remove any labels from the  
outside surfaces.  
2. Plug the Smart Mill & Brew™ Coffee Maker into a 120V AC  
electrical outlet.  
9. Wash and dry all removable parts. Wipe the exterior of the  
Coffee Maker with a damp cloth.  
3. The “Welcome” screen will appear, followed by “Scanning for Signal.”  
Depending on the signal strength in your area, “Acquiring Signal”  
may remain on the LCD Display for up to 1 hour. Please be patient.  
WARNING: Changes or modifications to this equipment  
not expressly approved by the party responsible for  
compliance could void the user's authority to operate  
the equipment.  
This device complies with Part 15 of the FCC Rules. Operation  
is subject to the following two conditions:  
(1) this device may not cause harmful interference, and  
(2) this device must accept any interference received, including  
interference that may cause undesired operation.  
NOTE: This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant to Part 15  
of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a  
residential installation.  
4. While the unit is scanning for the signal, you may begin to  
brew a Carafe of freshly ground coffee. Simply press the  
COFFEE/WEATHER Button and the “Mill & Brew Idle”  
screen will appear.  
This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
HELPFUL HINT: Use the  
COFFEE/WEATHER Button to  
toggle between Coffee Mode and Weather Mode.  
• Reorient or relocate the receiving antenna.  
5. If this is the initial use of the Coffee Maker, please consult the section  
entitled “Before Using Your Smart Mill & Brew™ For The First Time”  
and follow the steps outlined on pages 14 and 15 to make sure the  
unit is properly cleaned and ready for brewing.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different  
from that to which the receiver is needed.  
• Consult the dealer or an experienced radio/TV technician  
for help.  
6. After cleaning, simply add your favorite whole bean coffee and water,  
select the grind setting for coffee beans, then grind and brew fresh  
coffee immediately. Ground coffee may also be used. Please consult  
the “Brewing Coffee: Immediate Start” section described on pages  
15 to 17 for detailed procedures.  
24  
5
Melitta_ME1MSB_IB_7-12-06 12/7/06 2:44 PM Page 15  
HELPFUL HINT: The unit’s Clock automatically synchron-  
izes to an atomic clock and the correct date, day and  
time will appear on the top of each Display.  
User Maintenance  
Instructions  
This appliance requires little maintenance. It contains no user serviceable  
parts. Do not try to repair it yourself. Any servicing requiring disassembly  
must be performed by a qualified appliance repair technician.  
Care and Cleaning  
Coffee is naturally oily. A build up of coffee oils on the Coffee Maker will  
adversely affect the taste of new pots of coffee. For best results, completely  
clean and dry all removable parts after every use.  
7. If the screen begins to flash while your Coffee Maker is in  
operation, a real time Weather Alert or Amber Alert has been  
When cleaning your Coffee Maker, please observe the following precautions:  
issued. Press the  
COFFEE/WEATHER Button and the  
• Make sure the Coffee Maker is OFF. Unplug and allow the Coffee Maker  
to cool completely before cleaning.  
information will scroll on the bottom of your screen. If you need  
to know further details about the Alert in your area, please tune  
into a local media source (i.e. TV, radio, or internet).  
NEVER IMMERSE THE CORD, PLUG OR COFFEE MAKER IN  
WATER OR OTHER LIQUID.  
8. If the following screen appears, please visit the msn website  
signal coverage in your area. While we do not anticipate  
problems, if your Coffee Maker is still experiencing difficulty in  
obtaining a signal, please call 1-800-459-8060 for further  
assistance to help you resolve any issues.  
• Do not use metal cleaning pads or abrasive cleaners.  
Daily  
Wash all removable parts in warm, soapy water. Rinse thoroughly and dry. If  
necessary, use a small brush, such as a toothbrush, to clean the Carafe Lid,  
the bottom of the Filter Basket and around the Pause & Pour Switch.  
Monthly  
NO SIGNAL  
PLEASE  
CALL  
Mineral deposits from tap water can clog the Coffee Maker or reduce its  
efficiency and adversely affect the taste of the coffee. For best coffee  
brewing results, the Coffee Maker should be cleaned once a month with a  
solution of vinegar and water. To remove mineral deposits from the  
Coffee Maker, follow the descaling instructions described below:  
1-800-459-  
8060  
9. If you do not wish to see the sleeping cat, please consult the  
instructions for Menu/Setup on page 9 to turn Sleep Mode  
to OFF.  
1. Pour 1/2 cup of vinegar into the carafe. Add cold water up to  
the Water Reservoirs 4-cup mark. Pour the vinegar/water  
mixture into the Water Reservoir.  
2. Insert the Filter Basket. DO NOT USE COFFEE!  
3. Make sure the Grind Level is set to “0” to turn the Blades OFF.  
Consult the “Selecting the Grind Level” section of this Owners Manual  
for detailed instructions.  
4. Press the ON/OFF Button to begin the brew cycle.  
5. When the brew cycle is finished, press the ON/OFF Button to turn the  
Coffee Maker OFF. Carefully remove the Carafe and place on a heat  
resistant surface.  
6. Wait 15 minutes. Pour the same vinegar/water solution back into the  
Water Reservoir. Replace the Carafe onto the Warming Plate.  
6
23  
Melitta_ME1MSB_IB_7-12-06 12/7/06 2:44 PM Page 17  
Coffee Maker Controls  
Weather Warnings & Alerts  
When the Coffee Maker is in the Weather mode, real time information  
at the bottom portion of the screen is updated continuously, and will  
scroll through the information described in the chart below.  
Control Panel  
NOTE: Press the  
COFFEE/WEATHER Button to display  
pertinent Coffee information on the bottom pane. Please  
refer to the diagram on page 13 of this Owners Manual for a  
detailed description of coffee information displayed.  
NOTE: If the screen begins to flash while your Coffee Maker is in  
Menu  
Up  
operation, a real time Weather Alert or Amber Alert has been  
issued. Press the  
COFFEE/WEATHER Button and the  
information will scroll on the bottom of your screen. If you need  
to know further details about the Alert in your area, please tune  
into a local media source (i.e. TV, radio, or internet).  
Mill  
On/Off  
Select  
Timer  
Down  
HELPFUL HINT: Please refer to the “Definition of Terms”  
section on pages 25 and 26 of this Owner’s Manual for  
the National Weather Service’s detailed descriptions of  
Weather Warnings and Alerts.  
COFFEE/WEATHER Button  
Toggles between Coffee and Weather modes.  
ON/OFF Button  
Severe Weather  
Visibility (in miles or km)  
Sunrise  
Press to begin the grinding/brewing process; press to stop grinding or  
brewing or press to turn the Warming Plate manually OFF.  
NOTE: To power OFF the unit completely, unplug the  
Coffee Maker.  
MENU Button  
Use to change default settings for backlight, date format, language,  
metric/temperature format, time format, and sleep (cat) mode. Also  
press to reset the Coffee Maker to original factory settings.  
UP/DOWN Buttons  
Use this pair of Buttons to navigate coffee brewing and weather  
operations and functions.  
Sunset  
HELPFUL HINT: When programming Future Brew Start Time,  
press and hold down the UP or DOWN Button to fast  
forward or fast reverse the time in 5-minute increments.  
UV Levels  
• by UV Index Number  
• low, moderate, high  
TIMER Button  
Press to program Future Brew Start Time.  
MILL Button  
Select coffee bean grind setting: from 0 to 7.  
HELPFUL HINT: Please refer to the “Weather Terms /  
Ultraviolet Index” section on page 25 of this Owner’s  
Manual for a detailed description of the UV Index and  
proper actions to take based on UV information.  
HELPFUL HINT: When using previously ground coffee, you must  
set Grind Level to “0” to turn the Grinder Blades OFF.  
LCD Display  
Displays current time, day, date, Coffee Maker status, Grind Level,  
current weather conditions and 3-Day weather forecast.  
22  
7
Melitta_ME1MSB_IB_7-12-06 12/7/06 2:44 PM Page 19  
Weather Icons  
Menu/Setup  
Press the MENU Button to change factory settings. Control options  
include: BACKLIGHT, DATE FORMAT, LANGUAGE: English, French or  
Spanish, METRIC FORMAT, TIME FORMAT, RESET all settings and SLEEP  
MODE (cat animation).  
Description  
Icon  
Sunny  
Press the UP or DOWN Button to navigate between settings. When the  
desired option is highlighted, press the SELECT Button to activate.  
HELPFUL HINT: In the event of a power failure, it may be necessary  
Partly-Sunny  
Cloudy  
Rain  
to use the MENU Button to reset previously changed options.  
• Controls the blue  
SETUP  
BACKLIGHT  
backlit LCD Display  
• ON = ON always  
• OFF=No backlight  
BACKLIGHT  
DATE FORMAT  
LANGUAGE  
METRIC FORMAT  
TIME FORMAT  
RESET  
ON  
OFF  
AUTO OFF  
• AUTO OFF = OFF  
after 10 sec. delay  
Thunder Storm  
Night Clear  
Night Cloudy  
Frigid  
SETUP  
• Changes the format  
of the Display  
• Day/Month  
• Month/Day  
BACKLIGHT  
DATE FORMAT  
LANGUAGE  
METRIC FORMAT  
TIME FORMAT  
RESET  
DATE FORMAT  
DD / MM  
MM / DD  
Snow  
• Choose to display  
coffee and weather  
information in  
SETUP  
LANGUAGE  
ENGLISH  
FRENCH  
BACKLIGHT  
DATE FORMAT  
LANGUAGE  
METRIC FORMAT  
TIME FORMAT  
RESET  
Fog  
3 languages  
SPANISH  
Windy  
Haze  
SETUP  
• Changes temp.  
information to  
display in ºF or ºC  
METRIC FORMAT  
ºF / MILE  
BACKLIGHT  
DATE FORMAT  
LANGUAGE  
METRIC FORMAT  
TIME FORMAT  
RESET  
Dust  
ºC / KM  
• Changes visibility  
information from  
miles to km  
Smoke  
8
21  
Melitta_ME1MSB_IB_7-12-06 12/7/06 2:44 PM Page 21  
Weather Information Center  
SETUP  
TIME FORMAT  
12 HOUR  
• Changes time display  
BACKLIGHT  
DATE FORMAT  
LANGUAGE  
METRIC FORMAT  
TIME FORMAT  
RESET  
When the Coffee Maker is in the Weather mode, real time information is  
updated continuously, 24/7 via a regional FM signal. The 4 Weather screens  
advance automatically. Press the UP Button at any time to manually advance  
to the next screen or press the DOWN Button to go back to previous screen.  
24 HOUR  
Current Forecast  
Screen 1  
• Weather Icon  
SETUP  
RESET  
YES  
BACKLIGHT  
DATE FORMAT  
LANGUAGE  
METRIC FORMAT  
TIME FORMAT  
RESET  
• Resets all options  
to original factory  
settings  
Todays High Temp.  
Todays Low Temp.  
• Current Temp.  
NO  
• Probability of Precipitation  
3-Day Weather Forecast  
Screen 2  
• When the unit is  
idle, the sleeping  
cat will appear.  
Cat will appear at  
the desired “sleep”  
time. Select OFF if the  
animated cat screens  
are not desired  
SETUP  
SLEEP MODE  
DATE FORMAT  
LANGUAGE  
METRIC FORMAT  
TIME FORMAT  
RESET  
10  
20  
60  
OFF  
SLEEP MODE  
High Temps  
SETUP  
• Press either the  
SELECT Button or  
press the MENU  
Button to exit the  
SETUP screen  
3-Day Weather Forecast  
Screen 3  
DATE FORMAT  
LANGUAGE  
METRIC FORMAT  
TIME FORMAT  
SLEEP MODE  
EXIT  
Low Temps  
3-Day Weather Forecast  
Screen 4  
Probability of Precipitation  
20  
9
Melitta_ME1MSB_IB_7-12-06 12/7/06 2:45 PM Page 23  
Weather Only Screens  
Coffee Maker Features  
NOTE: Your product may vary slightly from illustration.  
Current Conditions and Forecast  
11.  
1.  
FM Signal  
10.  
9.  
Strength  
AM/PM  
2.  
3.  
Date Display  
Time Display  
12.  
4.  
8.  
7.  
Animated  
Weather Icons  
5.  
Current Forecast  
City  
High/Low  
Current Temp.  
Chance of  
Precipitation  
Scrolling Weather  
Information  
6.  
13.  
Visibility  
UV Index  
Sunrise/Sunset  
1. Water Reservoir Lid  
Lift to pour water into the Water Reservoir.  
2. Water Window  
Markings indicate water needed to make corresponding cups of  
brewed coffee, 10 (5-oz.) cups maximum, 4 (5-oz.) cups minimum.  
3-Day Weather Forecast  
3 Day  
3. Pause & Pour  
Future  
Weather  
Forecast  
Stops the flow of coffee from the Brew Chamber when the Carafe  
is removed from the Warming Plate to allow a cup to be poured in  
mid-brew, if desired. Since the extraction rate varies during the brew  
cycle, we recommend allowing the brewing cycle to finish before  
pouring the brewed coffee.  
CAUTION: To prevent injury when utilizing Pause & Pour  
(drip-stop) feature, replace Carafe within 20 seconds of  
removing during brewing process.  
Displays real-  
time Weather  
Warnings  
& Alerts  
4. Carafe Lid (P/N 31190)  
Special design minimizes oxygen flow into the Carafe to help  
preserve coffee flavor.  
5. Carafe with Lid (P/N 31191)  
10 cup capacity with a sturdy, easy-grip Handle.  
6. Warming Plate with Auto Shut Off  
The Warming Plates scratch-resistant, non-stick coating prevents  
the Carafe from sticking. When brewing is complete, the Warming  
Plate keeps the coffee at the ideal serving temperature and will shut  
off automatically after 1 hour; the words “WARMING PLATE” will  
appear in the LCD Display when the unit is in the Coffee Mode and  
the Warming Plate is ON.  
HELPFUL HINTS: 4 Weather screens will advance automatically.  
Press the UP Button at any time to manually advance to the next  
screen or press the DOWN Button go back to previous screen.  
Please consult the “Definition of Terms” and “Understanding Weather  
Alerts” sections described on pages 25 and 26 for further information.  
10  
19  
Melitta_ME1MSB_IB_7-12-06 12/7/06 2:45 PM Page 25  
7. Control Panel  
Setting the Future Brew Start Time  
Use the Control Panel Buttons to set up all Coffee Maker functions,  
program the Mill, preset automatic Future Brew Time, and to  
manually start and stop brewing.  
1. The Future Brew Time is disabled from the factory. The word  
“OFF” will appear on the lower left corner of the Display. To set,  
press the TIMER Button.  
8. LCD Display  
NOTE: Once the Future Brew Time has been set, the Future  
Brew Time will default to the last time chosen.  
Program the blue backlight for spectacular visibility to highlight the  
Clocks date and time of day, display animated weather functions  
and Coffee Maker status.  
9. Coffee Mill  
Includes a Permanent Stainless Steel Filter Basket with integrated  
Stainless Steel Blades.  
10. Coffee Mill Lid Latch  
Press in Latch to release Lid.  
11. Coffee Mill Lid  
Lift to open.  
2. Future Brew Start “hours” time (next to the coffee cup in the  
bottom pane) will begin to flash. Adjust the Future Brew Time  
“hours” by pressing the UP or DOWN Button repeatedly. The  
hands of the clock will spin. When the desired “hour” is shown,  
press the SELECT Button. Next the “minutes” will begin to flash.  
Press the UP or DOWN Button until the desired “minutes”  
appears on the screen; then press the SELECT Button.  
12. Overflow Slot  
If too much water is poured into the Water Reservoir, any  
excess drains through this opening.  
13. Cord Storage Compartment  
HELPFUL HINT: Hold down the UP or DOWN Button to fast  
forward or fast reverse the time in 5-minute increments.  
The AM and PM will automatically change.  
Store unused cord inside the hidden Cord Storage Compartment to  
keep counters neat.  
HELPFUL HINT: Please call 1-800-459-8060 for availability of  
3. When the desired Brew Start time appears on the Display, press  
the TIMER Button to finalize.  
replacement parts.  
4. The ENABLE/DISABLE screen will automatically appear on the  
Display. ENABLE” will be highlighted. Press the SELECT Button  
to program the desired Future Brew Start time into memory.  
IMPORTANT: If the Future Brew Time function is not needed  
for the following day, press the TIMER Button to activate  
the Timer function, then press TIMER Button again, and  
the ENABLE/DISABLE screen appears. Press the DOWN  
Button to highlight DISABLE and press the SELECT Button  
to stop Coffee Maker from brewing automatically. The  
word OFF will appear next to the coffee cup icon in the  
lower left corner of the LCD Display.  
5. Prepare the unit for future brewing. Fill Water Reservoir with the  
desired amount of water; add coffee beans or ground coffee to  
the Filter Basket. Please consult the “Brewing Coffee: Immediate  
Start” section described on pages 15 to 17 for detailed  
procedures.  
18  
11  
Melitta_ME1MSB_IB_7-12-06 12/7/06 2:45 PM Page 27  
NOTE: If the Grind Level is set to “0,” when the ON/OFF Button  
is pressed, brewing will begin immediately.  
Coffee Mill Assembly  
1. Filter Basket (P/N 30640)  
5. A cup of steaming coffee icon and “ON” will appear in the lower  
pane of the LCD Display during brewing.  
8.  
9.  
Permanent Stainless Steel Filter  
Basket makes paper coffee filters  
unnecessary.  
7.  
6.  
2. Maximum Fill Level  
1.  
To prevent overflowing, do not place  
more than 8 scoops (8 tablespoons)  
of coffee beans in the Filter Basket.  
2.  
3.  
3. Blades  
6. When brewing is complete, the WARMING PLATE screen will  
appear. The Warming Plate will keep your coffee at the ideal  
serving temperature for 1 hour. As a safety precaution, the  
Warming Plate will automatically shut off after 1 hour.  
Stainless Steel Blades.  
4. Brew Chamber (P/N 31193)  
4.  
Holds the Filter Basket and Blades.  
Brewed coffee flows through the  
Brew Chamber into the Carafe.  
5.  
5. Pause & Pour Switch  
During brewing, when the Carafe is placed properly on the Warming  
Plate, the Pause & Pour Switch is depressed, allowing brewed coffee  
to flow into the Carafe. If the Carafe is removed from the Warming  
Plate, the Pause & Pour Switch is in the ‘out’ position preventing  
brewed coffee from flowing from the Brew Chamber.  
HELPFUL HINT: To stop the brewing process at any time,  
press the ON/OFF Button.  
NOTE: To prevent overflows during the brew cycle, replace  
the Carafe within 20 seconds.  
For Best Results:  
6. Filter Basket Tabs  
To avoid overflow and water leakage from the back of the Coffee  
Maker, do not fill the Water Reservoir with more than 10 (5-oz.)  
cups of fresh water; do not exceed the 10-cup marking on the  
Water Reservoir.  
Use tabs to remove Filter Basket when hot.  
7. Filter Basket Lid (P/N 30639B)  
Specially designed openings distribute hot water over coffee grinds  
for optimal brewing.  
• Do not add less than 4 cups (20 ounces) of water to the  
Water Reservoir.  
8. Filter Basket Lid Tabs  
Use tabs to remove Filter Basket Lid when hot.  
9. Safety Interlock Switch  
• Do not add more than than 8 scoops of whole bean coffee to the  
Filter Basket.  
To keep coffee hot, return the Carafe to the Warming Plate  
after serving.  
This Switch prevents coffee brewing from beginning unless the  
Coffee Mill Assembly is placed properly in the Brew Chamber and  
the Coffee Mill Lid is closed securely.  
• The Coffee Mill is intended for COFFEE ONLY. Never grind any  
other food products or spices in the Coffee Mill.  
CAUTION: BLADES ARE SHARP. DO NOT ATTEMPT TO  
DISASSEMBLE COFFEE MILL ASSEMBLY.  
12  
17  
Melitta_ME1MSB_IB_7-12-06 12/7/06 2:45 PM Page 29  
WARNING: The Filter Basket maximum capacity is 8 scoops of  
whole bean coffee. DO NOT EXCEED THE 8-SCOOP MAXIMUM.  
Coffee Only Screens  
FM Signal Strength  
AM/PM  
NOTE: 8 scoops = 8 tablespoons maximum.  
Date Display  
4. Replace the Filter Basket Lid, taking care to place it securely on the  
Filter Basket.  
Time Display  
Coffee  
Information  
Center  
WARNING: The Coffee Maker will not operate  
without the Lids being closed properly. A  
Warning Screen will appear. Replace the  
Coffee Mill Lid and operation will resume.  
NOTE: Ground coffee may be substituted for  
whole coffee beans.  
Brewing Status  
ON/OFF /  
Future Brew  
Time  
We recommend using 1/2 to 1 tablespoon of ground coffee beans  
for every brewed cup of coffee, which may be adjusted to suit your  
individual tastes.  
Grind Level  
(0 to 7)  
Coffee Information Center  
The central portion of your screen displays all Coffee Maker  
operations associated with brewing coffee. The following screens will  
appear and provide Coffee Maker brew status information.  
NOTE: When using ground coffee press the MILL Button and set  
Grind Level to “0” (See the following section: “Selecting the Grind  
Level” for complete procedure.)  
Selecting the Grind Level  
1. Press the MILL Button. The Grinder is factory preset to Grind  
Level “0.”  
1. Press  
Mill & Brew Idle  
1. Press MILL Button  
2. Press UP/DOWN Button  
3. Press SELECT Button  
Grind Select  
1. Grinding  
2. Brewing  
1. Press the ON/OFF Button  
to begin the automatic  
Mill/Brew process  
2. Press the ON/OFF Button  
to STOP the automatic  
Mill/Brew process  
NOTE: Once the Level has been changed, the Grind Level will  
default to the last Grind Level chosen.  
2. Adjust the Grind Level by pressing the UP or DOWN Button repeatedly.  
“1” is the coarsest grind, “ 7” is the finest. The grind selection will flash  
as it changes. When the Grind Level is set to “0,” Grinder Blades  
are OFF.  
3. Warming Plate  
1. Press TIMER Button  
2. Press UP/DOWN Button  
3. Press SELECT Button  
Program Time  
(Future Brew Start)  
3. When the desired Grind Level appears on the screen, press the  
SELECT Button.  
4. To begin the brewing process, press the ON/OFF Button. The Coffee  
Mill will begin grinding the coffee beans. The “Grinding” screen will  
appear in the coffee information center of the Display during the  
grinding operation. Brewing will begin automatically.  
Enable/Disable  
(Future Brew)  
1. Press UP/DOWN Button  
2. Press TIMER Button  
1. Replace the Coffee  
Mill Lid  
WARNING  
16  
13  
Melitta_ME1MSB_IB_7-12-06 12/7/06 2:45 PM Page 31  
8. Press the ON/OFF Button. The “Brewing”  
screen will appear as water will begin to flow  
through the Coffee Maker. The Brew ON  
icon will appear at the bottom left of the  
LCD Screen.  
Brewing Instructions  
®
Before Using Your Melitta Smart Mill & Brew  
Coffee Maker for the First Time  
1. Carefully unpack your Coffee Maker. Remove any labels from the  
outside surfaces.  
9. When the Carafe is full, press the ON/OFF  
Button to turn the unit OFF. Discard the  
water in the Carafe. Allow the unit to cool  
for 15 minutes.  
Note the Brew ON  
2. Clean the Carafe, Carafe Lid, Filter Basket and Filter Basket Lid in  
warm, soapy water. Rinse thoroughly and dry.  
steaming coffee cup icon  
at the bottom left side  
of the LCD Display.  
10. Refill the Water Reservoir and repeat steps  
8 and 9 one more time.  
3. Fill the Water Reservoir to the 10-cup mark with cold water. Place  
the Carafe onto the Warming Plate.  
4. Insert the Filter Basket and Filter Basket Lid into the Coffee  
Coffee Yield  
Maker, taking care to replace it properly. DO NOT USE COFFEE  
WHEN CLEANING. USE WATER ONLY. Close the Coffee Mill Lid.  
A 5-oz. cup is the American industry standard and is used by most  
coffee maker manufacturers. The Smart Mill & Brew™ Coffee Maker  
brews a maximum of 10 (5-oz.) cups as indicated by the 10 coffee  
cup markings on the Water Window. For best results, we do not  
recommend preparing less than 4 cups (or 20 ounces) of coffee.  
NOTE: The Coffee Mill Lid must be closed securely in order  
for the brew cycle to begin.  
5. Plug the Smart Mill & Brew™ Coffee Maker into a 120V AC  
electrical outlet.  
6. The “Welcome” screen will appear, followed by “Scanning for  
Signal” and then “Acquiring Signal” which may remain on the  
LCD Display for up to 1 hour depending on the signal strength in  
your area. Please be patient.  
Brewing Coffee: Immediate Start  
1. Fill the Water Reservoir to the 10-cup mark with cold, fresh  
water. Place the Carafe securely onto Warming Plate.  
NOTE: Take care to place the Carafe squarely beneath the  
Brew Chamber. If it is even slightly off center, the Pause &  
Pour feature will prevent brewed coffee from flowing into  
the Carafe and the coffee may overflow.  
2. Press the  
COFFEE/WEATHER Button twice to advance  
to the coffee-only mode. The “Mill & Brew Idle” screen advises  
the unit is not in operation.  
7. While the unit is scanning for the signal, press the  
COFFEE/WEATHER Button to advance to the coffee-only mode.  
The “Mill & Brew Idle” screen advises the unit is not in operation.  
3. Open the Coffee Mill Lid and remove the Filter Basket Lid. Using  
the scoop provided with your Coffee Maker, measure the desired  
amount of roasted whole bean coffee into the Filter Basket. We  
recommend using 1 scoop for every 2 cups of brewed coffee,  
which may be adjusted to suit your individual tastes.  
The synchronized  
Press the  
Note the Grind Level  
Atomic Clock info at the  
top of the screen will  
appear when the FM  
signal has been acquired.  
COFFEE/WEATHER  
Button to change to  
the coffee-only mode.  
listed at the bottom right  
side of the LCD Display.  
The unit is preset to “0.”  
NOTE: 1 scoop = 1 tablespoon.  
14  
15  

National Instruments Computer Accessories PXI 8460 User Manual
Motorola Cell Phone XPRT User Manual
Marantz DR6050 User Manual
Kalorik USK CM 4 User Manual
Hitachi HUS103073FL3600 User Manual
Harley Davidson HDP66 User Manual
Grindmaster SHUTTLE APBVSA 330V2E230 User Manual
Cuisinart Coffeemaker DGB900BCU User Manual
Bolens 24650L User Manual
Apple Scratch 17357 User Manual