Maxtor Installation Guide 1394 User Manual

Personal Storage Installation Guide for Windows  
1394 Interface  
Pre  
Hardware  
Installation  
Personal Storage Installation  
To connect your new Maxtor Personal Storage prod-  
uct to your computer, please follow these simple  
steps. If these steps are not performed in order, your  
product may not function properly.  
Windows  
1
Installation  
3
4
Software Setup  
Maxtor has configured your new Personal Storage  
product into a single FAT 32 partition.  
Thank You  
Thank you for selecting a Maxtor Personal Storage  
product. Please follow these instructions to take full  
advantage of its features.  
Windows 98SE Users  
Windows 98 SE users will be prompted to insert the  
Windows 98SE CD-ROM when the product starts up.  
Handling Precautions  
Power Cord Connections  
1. Ensure that your computer is on and running one  
of the required operating systems.  
You will see 4 Version Conflict dialog boxes: Click  
YES and keep the existing files. DO NOT CANCEL,  
or the drivers will not load properly. The dialog boxes  
will only display the first time you install the product  
and may only show up with the Retail version of  
Windows 98SE.  
If these handling precautions are not followed,  
damage to the Personal Storage product may result –  
which may void your product warranty. Please see  
the Warranty section for additional information.  
2. Plug the four-pin male connector with the flat  
side facing up into the back of the products DC  
power-in connector (Figure 1).  
• DO NOT open the product. Opening the product  
will void the warranty.  
If you restart your system and it does not recognize  
your new Personal Storage product, you may need a  
driver update from Microsoft. See the instructions  
below for downloading the Critical Updates for  
Windows 98SE.  
• DO NOT bump, jar or drop this device as it may  
result in loss of data.  
Figure 1  
Power Connection  
• DO NOT stack this product more than three  
units high.  
Personal Storage Product  
• DO NOT set or operate the product on its side  
without an approved cradle from Maxtor. It may  
fall over and damage the internal hard drive.  
If you do not see the icon (right) in the  
icon tray of your start bar located on the  
right side, you need to obtain the Critical  
Updates from Microsoft.  
• DO NOT disconnect any cables or power while  
copying files without properly unplugging or  
unmounting the device via your operating system –  
as this can result in data loss and possible damage  
to the internal hard drive.  
1394 PCI Adapter Card  
If you are using another brand of 1394 card or com-  
puter with an integrated 1394 interface and have the  
Microsoft Critical Updates, you will need to obtain  
the 1394 drivers from the manufacturer of that card  
or system.  
• DO NOT set any liquids or drinks on the product -  
as they will damage the internal electronics.  
3. Connect the female end of the electric cord into  
the power adapter (Figure 2).  
To obtain the Microsoft Critical Updates:  
• NOT intended as a portable product.  
Click on the START button located on your toolbar.  
Hardware and Operating System Requirements  
for Windows PC  
• Pentium II-class or higher  
Select the Windows Updates option.  
(This will launch your browser to the appropriate  
URL for your Operating System in the language  
that you are using).  
Figure 2  
Power Adapter Connection  
• At least 32 MB of RAM  
Click on the Product Updates option.  
(This option will examine your system and  
prompt you to download the necessary updates)  
• An IEEE 1394 (iLINK, FireWire) interface  
connection on your system  
• An Internet connection for contacting Maxtor  
If you’re still experiencing trouble after running  
Critical Updates, Microsoft recommends that you  
download the Windows 98SE 1394 Storage  
Supplement from www.microsoft.com.  
• Windows 98 Second Edition, Windows Millennium  
Edition, Windows 2000 or Windows XP  
Continued  
Please see reverse side for operating tips, notes  
on multiple system use, product registration and  
warranty information.  
Kit  
4. Plug the male connector from the power adapter  
into power outlet.  
2
Components  
1394 Data Cable Connections  
1. Plug one end of the translucent 1394 cable into  
any available 1394 port on your computer.  
The Maxtor Personal Storage product comes  
complete with the components shown here.  
Please familiarize yourself with each of these  
items prior to installation.  
2. Plug the other end of the translucent 1394 cable  
into either of the 1394 connections on the  
product (Figure 3).  
Personal Storage  
Power Adapter  
1394 Cable  
Figure 3  
1394 Cable Hook-up  
1394 External Storage  
Installation Software for Mac OS and Windows  
0
v
r
e
M
a
t
o
t
r
C
i
R
r
p
l
l
A
a
ti  
.
CD-ROM  

KitchenAid PROLINE 4KPCM050 User Manual
Kenwood KDC 5026G User Manual
JVC KD PDR51 User Manual
HTC G2 User Manual
HP Hewlett Packard Hewlett Packard Computer Accessories AA RTDKA TE User Manual
Freecom Technologies Hard Drive Secure User Manual
Emerson RP6250 User Manual
AMCC 3WARE 9500S User Manual
Addonics Technologies ZESAES256 User Manual
Addonics Technologies CCMSPC2 User Manual