PROGRAMMABLE PORTABLE
CD PLAYER
MODEL CD-10
OPERATING INSTRUCTIONS
PLAYS MUSIC COMPACT DISCS, CD-R, CD-RW
BRIGHT LED TRACK DISPLAY
REPEAT ONE PLAY & REPEAT ALL PLAY MODES
SKIP & SEARCH CD FUNCTIONS
INTEGRATED FULL SIZE HANDLE
2 WAY POWER - AC/DC
VOLUME LIMITER SWITCH
REQUIRES 6 SIZE “C” BATTERIES (not included)
•
•
•
•
•
•
•
•
PLEASE READ CAREFULLY BEFORE USE
IB-CD10(SL)-WM-E-052605
IB-CD10(SL)-WM-E-050705.pmd
1
5/26/2005, 9:23 AM
IMPORTANT SAFETY INSTRUCTIONS
15. Power Sources - This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power supply to your
home, consult your product dealer or local power company. For products intended to
operate from battery power, or other sources, refer to the operating instructions.
16. Overloading - Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
17. Servicing - Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
18. Safety Check - Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the product is in proper
operating condition.
Do not apply oil or petroleum products or solvents to any part of this set.
CAUTION
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
This compact disc player is classified as CLASS 1 LASER PRODUCT as stated
on the back of the set.
Please read important information displayed on the rating plate located on the back
enclosure before connecting to AC power or any operation.
IB-CD10(SL)-WM-E-052605
2
IB-CD10(SL)-WM-E-050705.pmd
3
5/26/2005, 9:23 AM
BATTERY SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY OR DAMAGE
TO YOUR SET, READ AND FOLLOW THESE INSTRUCTIONS.
1. Use only the type and size of batteries mentioned in the operating instructions booklet
(batteries are not included with this set, please buy the proper batteries).
2. Do not dispose the batteries into a fire. The cells may explode. Check with local
codes for possible special disposal instructions.
3. Do not open or mutilate the batteries. Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may be toxic if swallowed.
4. Be careful when handling batteries in order not to short the battery with conducting
materials such as rings, bracelets and keys. The battery or conductor may over heat
and cause burns.
5. Do not attempt to recharge non-rechargeable batteries. The batteries may leak
corrosive electrolyte or explode.
6. Do not attempt to rejuvenate the batteries identified for use with this product by
heating them. Sudden release of the battery electrolyte may cause burns or irritation
to eyes or skin.
7. All batteries should be replaced at the same time. Mixing fresh and discharged
batteries could increase internal cell pressure and rupture the batteries.
8. When inserting batteries into this product, the proper polarity (
and
) or direction
must be observed. Reverse insertion of some or all of the batteries may result in
battery electrolyte leakage or explosion.
9. Remove the batteries from this product if the product will not be used for a long period
of time (several months or more) since during the period the batteries could leak,
damaging the product.
10. Discard weak or dead batteries as soon as possible since they are more likely to leak
in the product. Batteries should be replaced (depending on the product) when the
display gets dim or if the Low Battery Indicator shows or if the sound gets distorted.
11. Do not store this product in high temperature areas. Batteries that are stored in a
freezer or refrigerator for the purpose of extending shelf life should be protected from
condensation during storage and defrosting. Batteries should be stabilized at room
temperature prior to use after cold storage.
12. If this product does not operate normally, see TROUBLE SHOOTING in this
instruction manual. If you can’t resolve the problem, or if the product is damaged,
refer to the LENOXX WARRANTY INFORMATION. Opening or removing covers
may expose you to dangerous voltages or other risks. Incorrect reassembly can
cause electric shock when the appliance is subsequently used.
13. If liquid leaks from the batteries, carefully wipe this liquid. Do not allow it to touch
your skin, and discard the leaking batteries.
14. Do not mix batteries (OLD and NEW or CARBON and ALKALINE, etc.).
15. The use of rechargeable batteries is not recommended for this set because their
voltage and life is lower than standard batteries.
16. Installation of batteries should be done by an adult only.
SAVE THESE INSTRUCTIONS
IB-CD10(SL)-WM-E-052605
3
IB-CD10(SL)-WM-E-050705.pmd
4
5/26/2005, 9:23 AM
CHOOSING THE POWER SOURCES
You can use the AC power or batteries as a power source.
To a wall outlet
BATTERY DOOR
(on the back of the set)
NOTE: One blade of plug
and outlet is wider.
TIP
1. Connecting the AC power
If the plug of the AC power
•
Insert one end of the supplied AC power cord into
the socket located at the rear of the set, and the
other end into the 120V, 60Hz standard household
outlet.
cord does not match your
outlet, do not force it.
Reverse it and try again.
The plug is polarized and
only fits one way into the
wall outlet and socket on
the set’s rear.
2. Using the player on batteries
Insert 6 size “C” batteries (not supplied) into the
battery compartment as shown, observe + and
polarities.
To use the player on batteries, disconnect the AC
power cord from both the wall outlet and the back of
the player.
Replace the batteries
when the POWER lamp
dims or when the player
stops operating. Replace
all the batteries with new
•
ones.
Remember
to
check the Battery Safety
Instructions on Page 3.
Install batteries as illustrated
IB-CD10(SL)-WM-E-052605
4
IB-CD10(SL)-WM-E-050705.pmd
5
5/26/2005, 9:23 AM
PLAYING A CD
PLAY/PAUSE
button
OPEN button
VOLUME/POWER OFF
switch (at the right side
of the set)
Connect the supplied AC power cord or batteries (refer to page 4).
Rotate the VOLUME/POWER
OFF switch (on the right side of
the set) downwards past the click
to turn on the set, the POWER
lamp will be on,the display will show
2 dashes “ ” flashing, then “ ”.
1
2
POWER
OFF
REPEAT
V
O
L
U
M
E
POWER
PLAY/PROG.
Press the OPEN button to open
the CD door and place a CD into
the CD compartment. The label
side of the CD should face
outward. Make sure the disc is
seated on the spindle by pressing
down in the center (clicks into
place).
3
4
Close the CD DOOR by pushing
the “close” area of the door. The
display will show the total tracks
of that CD.
REPEAT
POWER
PLAY/PROG.
example (disc with
15 songs)
Press the CD PLAY/PAUSE
button, the PLAY/PROG. lamp will
be steadily on, the player will play
all the music tracks once.
REPEAT
POWER
PLAY/PROG.
PLAY/PAUSE
Track number playing
NOTE: In order to avoid the music playing too loudly, we suggest you switch the
volume limiter switch (in the battery compartment) to the ON position before playing
the set. If you want to increase the volume even more, you can stop play and switch
the volume limiter switch to OFF position.
TIP: “ ” will show in the display if there is no CD disc in the CD compartment or the
CD disc is inserted the wrong way or not “clicked” onto the spindle.
IB-CD10(SL)-WM-E-052605
5
IB-CD10(SL)-WM-E-050705.pmd
6
5/26/2005, 9:23 AM
USE THESE BUTTONS FOR
ADDITIONAL OPERATIONS
PLAY/PAUSE button
PHONES jack
REPEAT
VOLUME/
POWER OFF
switch
POWER
PLAY/PROG.
STOP button
SKIP/SEARCH
buttons
TIP
Press or Adjust
To
When CD play is
paused, the PLAY/
PROG. lamp will be
off, the track number
will flash and no music
will play.
Adjust the volume
Stop playback
VOLUME/OFF switch
STOP button
•
PLAY/PAUSE button
The track number will flash,
the PLAY/PROG. lamp will be
off during pause. Press again
to resume play after pause.
Pause playback
To resume play, press
the PLAY/PAUSE button
again, the track number
will stop flashing, the
PLAY/PROG. lamp will
be on and music will
play.
•
SKIP/SEARCH
FORWARD button
Go to the next track
SKIP/SEARCH
BACKWARD button
Go back to the previous
track
If you bump the set
during CD play, the
music will stop or skip
for a few seconds.
This is normal for this
type of player.
•
or
Press and hold down while
playing until you find the point
of the song you want.
Locate a point in a song
Insert your headphones (not
included) plug into the
To enjoy the music
without disturbing others.
PHONES jack
(on the
right side of the set).
Press the STOP button first,
then press the OPEN button.
Remove the CD
Rotate the VOLUME/POWER
OFF switch upwards past
click, the power lamp goes off.
Turn off the power
IB-CD10(SL)-WM-E-052605
6
IB-CD10(SL)-WM-E-050705.pmd
7
5/26/2005, 9:23 AM
PLAYING CD TRACKS REPEATEDLY
(REPEAT PLAY)
You can play CD tracks over and over in normal or programmed play mode (refer to
page 8).
PLAY/PAUSE button
VOLUME/POWER
OFF switch
REPEAT/PROGRAM button
SKIP/SEARCH buttons
1. Turn on the set, the POWER lamp will be steadily on.
2. Select the track by pressing
or
, and then press PLAY/PAUSE
button.
3. Press the REPEAT/PROGRAM button.
To repeat
Press
Display shows
Press
the
REPEAT/
REPEAT
POWER
A single track (song)
PROGRAM button once,
the REPEAT lamp will flash.
PLAY/PROG.
Press
the
REPEAT/
REPEAT
All the tracks (all songs)
on this disc
PROGRAM button twice, the
REPEAT lamp will be
steadily on.
POWER
PLAY/PROG.
During programmed play,
press
the
REPEAT/
Programmed tracks
PROGRAM button twice,
the REPEAT lamp will be
steadily on and the PLAY/
PROG. lamp will flash.
REPEAT
POWER
PLAY/PROG.
To cancel Repeat Play
Press the REPEAT button until the REPEAT lamp goes off.
IB-CD10(SL)-WM-E-052605
7
IB-CD10(SL)-WM-E-050705.pmd
8
5/26/2005, 9:23 AM
PLAYING CD TRACKS IN PROGRAMMED ORDER OR
IN RANDOM ORDER
1.Programmed play
You can make a program of up to 20 tracks in the order you want them to be played.
PLAY/PAUSE button
STOP button
VOLUME/OFF
switch
RANDOM button
REPEAT/PROGRAM button
SKIP/SEARCH buttons
1. Turn on the CD player by rotating the VOLUME/POWER
OFF switch downward past click. Make sure the CD is
stopped.
REPEAT
POWER
PLAY/PROG.
2. Press the REPEAT/PROGRAM button. The letters “
and the PLAY/PROG. lamp will flash.
”
3. Press
the order you want.
4. Press the REPEAT/PROGRAM button to confirm. The
letters “ ” and the PLAY/PROG. lamp will flash.
5. Repeat above steps 3 and 4. You can program up to 20 tracks,
then the display will show the track numbers you programmed.
or
to select the track you want to program in
REPEAT
POWER
POWER
PLAY/PROG.
REPEAT
6. Press PLAY/PAUSE button to start programmed play. The
PLAY/PROG. lamp will flash.
PLAY/PROG.
NOTE:
1. Programming can only be done while in STOP mode.
2. The programmed memory will be lost if the STOP button is pressed twice or the power
is shut off, or the CD door is opened.
To change the current program
Just create a new program following the programming procedure.
To cancel Programmed Play
Press the STOP button twice.
2.Random play
To play the songs in random order
Press the RANDOM button in STOP mode or during playing, the set will play all of the
songs in random order. The floating symbol “
track number will show in turn in the display.
”and the current
To resume normal play
Press the RANDOM button again, the player will start playing normally.
IB-CD10(SL)-WM-E-052605
8
IB-CD10(SL)-WM-E-050705.pmd
9
5/26/2005, 9:23 AM
PRECAUTIONS
On Safety
This CD player is designed to be played
on a stable no vibration position. If you
bump the set during CD play, the music
will stop or skip for a few seconds. This
is normal for this type of player.
•
As the laser beam used in the CD player
•
section may be harmful to the eyes, do
not attempt to disassemble the cabinet.
Refer servicing to qualified personnel only.
Notes on CDs
Should any solid object or liquid fall into
•
the player, unplug the player, and have it
checked by qualified personnel before
operating it any further.
Before playing, clean the CD with a
•
cleaning cloth. Wipe the CD from the
center out.
On Placement
Do not leave the player in a location
•
near a heat source, or in a place subject
to direct sunlight, excessive dust or
mechanical shock.
Do not use solvents such as benzine,
•
thinner, commercially available cleaners
or anti-static spray intended for vinyl LPs.
Do not place the player on an inclined
or unstable place.
•
Do not expose the CD to direct sunlight
•
Do not place anything within 1 inch of the
•
or heat sources such as hot air ducts,
nor leave it in a car parked in direct
sunlight as there can be a considerable
rise in temperature inside the car.
back of the cabinet. The ventilation holes
must not be covered for the player to
operate properly and prolong the life of
its components.
Do not stick paper or stickers on the CD,
nor scratch the CD.
•
•
If the player is left in a car parked in the
•
sun, be sure to choose a location in the
car where the player will not be subjected
to the direct rays of the sun.
After playing, store the CD in its case. If
there is a scratch, dirt or fingerprints on
the CD, it may cause a tracking error or
skipping.
Since a strong magnet is used for the
•
speakers, keep personal credit cards
using magnetic coding or springwound
watches away from the player to prevent
possible damage from the magnets.
MAINTENANCE
Cleaning the Lens
If the lens becomes dirty, it may cause a
skipping of sound during CD operation.
Clean with a commercially available lens
cleaner and blower.
On Power Sources
For battery operation, use 6 size “C”
•
batteries. We recommend alkaline
batteries for longer life.
When the batteries will not be used for a
•
few weeks or more, remove them to avoid
damage that can be caused by battery
leakage or corrosion.
On Operation
If the player is brought directly from a
•
cold to a warm location, or is placed in a
very damp room, moisture may condense
on the lens inside the CD player section.
Should this occur, the player will not
operate properly. In this case, remove
the CD and wait about an hour for the
moisture to evaporate.
Cleaning the Cabinet
Clean the cabinet, panel and controls with
a soft cloth slightly moistened with a mild
detergent solution. Do not use any type
of abrasive pad, scouring powder, or
solvent, such as alcohol or benzine.
IB-CD10(SL)-WM-E-052605
9
IB-CD10(SL)-WM-E-050705.pmd
10
5/26/2005, 9:23 AM
TROUBLE SHOOTING
Problem
Remedy
Insert the AC plug into a wall outlet securely.
•
Make sure the batteries are installed correctly
•
The power is not on.
There is no sound.
and that they are fresh.
Rotate the VOLUME/POWER OFF switch
•
downwards to turn on the set.
Adjust the volume.
•
Unplug the headphones when listening through
•
speaker.
Check the batteries.
•
Insert the CD with the label side outward.
Make sure the CD is inserted onto the spindle
and “clicked” into place & close the door.
•
“
” appears in the display
•
even when a CD is in place.
Make sure the CD is seated on the center spindle
•
•
•
•
and “clicked” into place before closing the door.
Make sure that the CD compartment is closed
properly.
Clean the CD or try another CD, this set will
CD does not play.
not play MP3 or WMA discs.
Replace the disc (this set will not play damaged
or scratched CDs), or buy a disc repair
polisher to repair the scratched disc yourself.
Take out the CD and leave the CD DOOR open
•
for about an hour to dry moisture condensation.
Clean the CD, or replace it if the CD is badly
•
damaged.
The sound drops out.
Place the player in a location free from vibration.
Check if your batteries are fresh.
•
•
No sound on battery
power or weak sound.
Your batteries are weak or dead. Replace all
batteries with new ones.
•
IB-CD10(SL)-WM-E-052605
10
IB-CD10(SL)-WM-E-050705.pmd
11
5/26/2005, 9:23 AM
SPECIFICATION
General Description
AC 120V, 60Hz
Power source:
DC 6 size “C” batteries (not included)
(Alkaline batteries are recommended)
1.1 Watts
Output power:
Dimensions:
1
2
Width: 11 / ”
5
8
Depth: 3 / ”
Height: 8”
Weight: 2.6 LBs (without batteries)
CD Section
Plays disc type:
Any normal music CD used in portable players, including CD-R & CD-RW.
760 - 800 NM
Laser wavelength:
3 - spot error detection
3.86 mm lens
Tracking method:
Frequency response:
50Hz - 15kHz +1/-2dB
Lenoxx reserves the right to make design and specification changes for product improvement.
PROTECT YOUR FINE FURNITURE!
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED UNDER THE SET
WHEN PLACING IT ON SURFACE WITH A NATURAL OR LACQUER FINISH.
LIMITED WARRANTY
We warrant this product to be free from defects in material and workmanship under normal use for a
period of 90 days after purchase and we will repair it free of charge or replace it at no charge, should it
become defective under this warranty, providing you submit proof of purchase (sales slip) with the set.
During the initial 90 day period after original purchase, we will service or exchange, at no charge, the
set that is returned to LENOXX ELECTRONICS CORP. After the initial 90 day period expires, and for a
period of 12 months from original purchase, we will repair the unit covering any part(s) that need to be
replaced at no charge, but will charge for the cost of labor, return postage paid by Lenoxx.
This warranty does not apply to any products which have been subject to misuse, neglect or accident.
This warranty does not cover broken cord or cabinet. UNDER NO CIRCUMSTANCES WILL LENOXX
ELECTRONICS CORP. BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some
states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state. The following charges apply to repairs beyond the warranty period: $10.00. Be sure to pack
carefully and return postage paid insured together with your money order (personal checks will not be
accepted) and sales receipt to:
LENOXX ELECTRONICS CORP., 2 GERMAK DRIVE, CARTERET N.J. 07008
For customer service
Dial 1-800-315-5885 (MONDAY - THURSDAY 8:00 AM - 5:00 PM, FRIDAY 8:00 AM - 1:00 PM EST)
© 2005 LENOXX ELECTRONICS CORP.
2 GERMAK DRIVE
CARTERET, N.J. 07008
MADE & PRINTED IN CHINA
IB-CD10(SL)-WM-E-052605
11
IB-CD10(SL)-WM-E-050705.pmd
12
5/26/2005, 9:23 AM
|