Legacy Car Audio LCD36 User Manual

LEGACY®  
OWNER’S MANUAL  
LCD36  
MANUALLY TUNED STEREO RADIO WITH  
COMPACT DISC PLAYER DIGITAL  
INSTALLATION  
Here is the installation diagram.  
DASH BOARD  
HEX NUT  
METAL MOUNTING STRAP  
SPRING  
WASHER  
TAPPING  
SCREW  
HEX BOLT  
PLAIN WASHER  
CONSOLE  
MOUNTING HOUSING  
Precautions  
1. Choose the mounting location where the  
unit will not interfere with the normal  
driving functions of the driver.  
Fire Wall  
2. Avoid installing the unit where it would  
be subject to high temperature, such as  
from direct sunlight, or from hot air, from  
the heater, or where it would be subject  
to dust, dirt or excessive vibration.  
3. For safe installation, use the mounting  
hardware provided by the manufacturer.  
Bracket  
3
REMOVE THE UNIT FROM THE DASH BOARD  
1. Remove the metal strap attached to the back of the unit.  
2. Disconnect all the wires of the unit and the antenna plug.  
3. Remove the handle frame from the trim plate.  
4. Insert the screw driver into the slot as shown, and slide the unit out of the dash  
board while holding the trim plate.  
5. Remove the screw driver from the slot.  
SLOT  
SLEEVE  
SCREW DRIVER  
TRIM  
PLATE  
HANDLE FRAME  
4
OPERATION  
3
5
13  
16  
7
12  
1
4
18 14 15  
11  
10  
9
6
2
17 8  
GENERAL OPERATION  
ON/OFF  
Press POWWR button (1) to turn on the unit. Press it again to turn it off.  
BALANCE  
Rotate the button (2) clockwise or anti-clockwise to adjust sound balance between  
left and right speakers.  
VOLUME  
Rotate the button (3) clockwise or anti-clockwise to adjust volume level.  
TONE CONTROL  
Rotate the button (4) clockwise or anti-clockwise to obtain the desired sound  
quality.  
SELECT MODE  
Press MOD button (5) to change radio or CD mode.  
LIQUID CRYSTAL DISPLAY  
The LCD (16) can show the current state of the unit.  
RESET BUTTON FUNCTION  
RESET button (17) is placed on the housing and must be activated with either a  
ballpoint pen or thin metal object. The RESET button (17) is to be activated for the  
following reasons:  
- Initial installation of the unit when all wiring is completed.  
- All the function buttons do not operate.  
- Error symbol on the display.  
5
RADIO OPERATION  
BAND  
Press BND button (7) to change bands as below:  
FM  
AM  
SELECT STATION  
Rotate the TUNING knob (8) clockwise or anti-clockwise to adjust the frequency  
upward or downward.  
LOCAL/DISTANT  
Press the LOC/RPT button (9) to select between local setting for reception of  
strong station and distant setting for reception of weak stations when tuning.  
MONO/STEREO  
In FM band, press MON/INT button (10) to select mono or stereo reception for  
radio stations. You can sometimes improve reception of distant stations by selecting  
mono operation.  
6
CD OPERATION  
DISC PLAY  
Gently insert a compact disc with the label side facing up into the disc slot (13).  
The disc is then automatically loaded into the unit and starts playing with the first  
track of the disc. The digital display will indicate the track number and the time of  
the track.  
EJECT  
Press (eject) button (12) to stop CD play and eject CD from the slot. Receiver  
switches to radio operation.  
PAUSE CD  
During CD playing, press  
button (11) to temporarily stop playing.  
Press it again to resume playback.  
SKIP TRACKS  
Press  
button (15) or  
button (14) to choose the following track or the  
previous track. Track numbers show on the display.  
FAST FORWARD AND FAST REVERSE  
Hold  
button (15) or  
button (14) for several seconds to fast forward or fast  
reverse. Releasing the button to stop fast playing.  
REPEAT  
During CD operation, press LOC/RPT button (9) to continuously repeat playing the  
current track. Press it again to release the mode.  
INTRO: PREVIEW ALL TRACKS  
During CD operation, press MON/INT button (10) to play first several seconds of  
each track. Press it again to stop intro and listen to track.  
RANDOM: PLAY ALL TRACKS IN THE RANDOM ORDER  
During CD operation, press and hold RND button (6) for several seconds to play  
all tracks in the random order. Press it again to cancel the function.  
MUT (MUTE)  
Press the MUT button (18) to cut down the sound output and LCD display will  
indicate MUTE. Press it again to release the mode and recover the previous  
volume level.  
7
WIRING CONNECTION  
MAIN UNIT  
ANTENNA CONNECTOR  
RCA CABLE  
Rch RED  
POWER  
ANTENNA  
BLUE  
FUSE  
Lch WHITE  
RED  
IGNITION  
B(+)  
WHITE  
GREY  
LEFT  
RIGHT  
SPEAKER  
SPEAKER  
BLACK  
GROUND/SPK.COMMON  
SPECIFICATION  
General  
Power Supply Requirements  
Chassis Dimensions  
: DC 12 Volts, Negative Ground  
: 178 (W) x 163 (D) x 51 (H) mm  
: 7 W X 2  
Maximum Output Power  
CD Player  
Signal to Noise Ratio  
Channel Separation  
Frequency Response  
: More than 60 dB  
: More than 60 dB  
: 100 Hz - 15 KHz  
Radio Section  
FM  
Frequency Range  
: 88 MHz 108 MHz  
: 10.7 MHz  
: Better than 25 dBu  
: More than 24 dB  
AM  
Intermediate Frequency  
Usable Sensitivity (Mono)  
Stereo Separation at 1 KHz  
Frequency Range  
Intermediate Frequency  
Usable Sensitivity (S/N 20 dB)  
: 530 KHz 1710 KHz  
: 455 KHz  
: Better than 42 dBu  
88-C2072-09  

Motorola MOTO WX288 User Manual
Maxtor Computer Drive User Manual
LG Electronics Viewty KU990 User Manual
LG Electronics LG Lifes Good CD Player L1733TR User Manual
JVC KD AR370 User Manual
Huawei Technologies Cell Phone U8652 User Manual
FieldServer A Sierra Monitor Company FS 8700 123 User Manual
Braun Tassimo User Manual
Black Box Computer Accessories LPJ008A T User Manual
Bench KH 2251 User Manual