0 5 6 4 X V
o i r a u s u l u e d l d a u n a M
User Guide
VX4650
Important Safety Precautions
Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detalied information is given in this
user guide.
Violation of the instructions may cause serious injury or death.
G
Never use an unapproved battery since this could damage the phone and/or battery and could cause
the battery to explode.
G
Never place your phone in a microwave oven as it will cause the battery to explode.
G
Do not dispose of your battery by fire or with hazardous or flammable materials.
G
Make sure that no sharp-edged items such as animal’s teeth, nails, come into contact with the
battery. There is a risk of this causing a fire.
G
Store the battery in a place out of reach of children.
G
Be careful that children do not swallow any parts such as rubber plugs (earphone, connection parts of
the phone, etc.). This could cause asphyxiation or suffocation.
VX4650 1
Important Safety Precautions
G
G
Unplug the power cord and charger during lightning storms to avoid electric shock or fire.
When riding in a car, do not leave your phone or set up the hands-free kit near to the air bag. If
wireless equipment is improperly installed and the air bag is activated, you may be seriously injured.
Do not use a hand-held phone while driving.
G
G
Do not use the phone in areas where its use is prohibited. (For example: aircraft).
G
Do not expose the battery charger or adapter to direct sunlight or use it in places with high humidity,
such as a bathroom.
G
G
Never store your phone in temperatures less than -4°F or greater than 122°F.
Do not use harsh chemicals(such as alcohol, benzene, thinners, etc.) or detergents to clean your
phone. There is a risk of this causing a fire.
G
G
Do not drop, strike, or shake your phone severely. Such actions may harm the internal circuit boards
of the phone.
Do not use your phone in high explosive areas as the phone may generate sparks.
2 VX4650
G
G
G
Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if it is loose
as it may cause a fire or electric shock.
Do not place any heavy items on the power cord. Do not allow the power cord to be crimped as it may
cause fire or electric shock.
Do not handle the phone with wet hands while it is being charged. It may cause an electric shock or
seriously damage your phone.
G
G
Do not disassemble the phone.
Do not place or answer calls while charging the phone as it may short-circuit the phone and/or cause
electric shock or fire.
G
G
Only use the batteries, antennas, and chargers provided by LG. The warranty will not be applied to
products provided by other suppliers.
Only authorized personnel should service the phone and its accessories. Faulty installation or
service may result in accidents and consequently invalidate the warranty.
G
G
Do not hold or let the antenna come in contact with your body during a call.
An emergency call can be made only within a service area. For an emergency call, make sure that you
are within a service area and that the phone is turned on.
VX4650 3
Contents
Call Waiting . . . . . . . . . . . . . . . . . . . . .17
Caller ID . . . . . . . . . . . . . . . . . . . . . . . . .17
Speed Dialing . . . . . . . . . . . . . . . . . . .18
Voice Command Dialing . . . . . . . . . .18
4. Groups . . . . . . . . . . . . . . . . . . . . . . . .34
5. Speed Dials . . . . . . . . . . . . . . . . . . .34
6. My VCard . . . . . . . . . . . . . . . . . . . . .34
Important Safety Precautions . . . . .1
Welcome . . . . . . . . . . . . . . . . . . . . . . . . .7
Check Accessories . . . . . . . . . . . . . . .7
Important Information . . . . . . . . . . . . .7
FCC Part 15 Class B Compliance . . .7
Recent Calls . . . . . . . . . . . . . . . . . . .35
Access and Options . . . . . . . . . . . . .35
1. Dialed Calls . . . . . . . . . . . . . . . . . . .35
2. Received Calls . . . . . . . . . . . . . . . .36
3. Missed Calls . . . . . . . . . . . . . . . . . .36
4. Erase Calls . . . . . . . . . . . . . . . . . . . .36
5. Call Timer . . . . . . . . . . . . . . . . . . . . .36
6. KB Counter . . . . . . . . . . . . . . . . . . . .36
Entering and Editing Information . .19
Text Input . . . . . . . . . . . . . . . . . . . . . . .19
Text Input Examples . . . . . . . . . . . . . .20
Phone Overview . . . . . . . . . . . . . . . . .10
Menus Overview . . . . . . . . . . . . . . . . .11
Getting Started with Your Phone . .13
Contacts in Your Phone’s Memory .22
The Basics of Storing Contacts
Entries . . . . . . . . . . . . . . . . . . . . . . . . . .22
Options to Customize Your Contacts 23
Editing Contacts Entries . . . . . . . . . .25
Default Numbers . . . . . . . . . . . . . . . . .26
Deleting . . . . . . . . . . . . . . . . . . . . . . . . .27
Phone Numbers With Pauses . . . . .29
Searching Your Phone’s Memory . .30
The Battery . . . . . . . . . . . . . . . . . . . .13
Charging the Battery . . . . . . . . . . . . .13
Turning the Phone On and Off . . . . .14
Signal Strength . . . . . . . . . . . . . . . . .14
Making Calls . . . . . . . . . . . . . . . . . . .14
Screen Icons . . . . . . . . . . . . . . . . . . .15
Redialing Calls . . . . . . . . . . . . . . . . . .16
Receiving Calls . . . . . . . . . . . . . . . . .16
Messages . . . . . . . . . . . . . . . . . . . . .37
Access and Options . . . . . . . . . . . . .37
1. Voice Mail . . . . . . . . . . . . . . . . . . . . .38
2. New Message . . . . . . . . . . . . . . . . .38
Message Icon Reference . . . . . . . . .40
3. Inbox . . . . . . . . . . . . . . . . . . . . . . . .41
4. Outbox . . . . . . . . . . . . . . . . . . . . . . . .42
5. Saved . . . . . . . . . . . . . . . . . . . . . . . . .43
6. Msg Settings . . . . . . . . . . . . . . . . . .43
Making a Call From Your Phone’s
Memory . . . . . . . . . . . . . . . . . . . . . . . . .31
Quick Access to Convenient
Features . . . . . . . . . . . . . . . . . . . . . . . . .16
Using Phone Menus . . . . . . . . . . . . .32
Menu Access . . . . . . . . . . . . . . . . . . .32
Manner Mode . . . . . . . . . . . . . . . . . . .16
Lock Mode . . . . . . . . . . . . . . . . . . . . . .16
Mute Function . . . . . . . . . . . . . . . . . . .17
Volume Quick Adjustment . . . . . . . .17
Adjusting Speaker On . . . . . . . . . . . .17
Message Settings Sub-Menu
Descriptions . . . . . . . . . . . . . . . . . . . .43
Contacts . . . . . . . . . . . . . . . . . . . . . . .32
Access and Options . . . . . . . . . . . . .32
1. List Contacts . . . . . . . . . . . . . . . . . .33
2. New Number . . . . . . . . . . . . . . . . . .33
3. New E-mail . . . . . . . . . . . . . . . . . . . .33
6.1 Auto Save . . . . . . . . . . . . . . . . . .43
6.2 Auto Erase . . . . . . . . . . . . . . . . . .43
6.3 Callback # . . . . . . . . . . . . . . . . . .43
4 VX4650
6.4 Signature . . . . . . . . . . . . . . . . . . .44
6.5 Voice Mail # . . . . . . . . . . . . . . . .44
6.6 Auto View . . . . . . . . . . . . . . . . . .44
6.7 Entry Mode . . . . . . . . . . . . . . . . .44
6.8 Quick-Text . . . . . . . . . . . . . . . . . .44
6.9 Auto Play . . . . . . . . . . . . . . . . . . .44
7. Erase All . . . . . . . . . . . . . . . . . . . . . .44
1.5.3 Minute Beep . . . . . . . . . . . . .58
1.5.4 Call Connect . . . . . . . . . . . . . .58
1.5.5 Back To Top . . . . . . . . . . . . . .58
1.6 Power On/Off Tone . . . . . . . . . .59
1.7 DTMF Length . . . . . . . . . . . . . . .59
2. Display . . . . . . . . . . . . . . . . . . . . . . . .59
2.1 Banner . . . . . . . . . . . . . . . . . . . .59
2.2 Backlight . . . . . . . . . . . . . . . . . . .59
2.2.1 LCD . . . . . . . . . . . . . . . . . . . . .59
2.2.2 Key Light Timer . . . . . . . . . . .60
2.3 Screens . . . . . . . . . . . . . . . . . . . .60
2.4 Menu Style . . . . . . . . . . . . . . . . .60
2.5 Clocks . . . . . . . . . . . . . . . . . . . . .60
2.6 Theme Colors . . . . . . . . . . . . . . .60
2.7 Contrast . . . . . . . . . . . . . . . . . . . .60
2.8 Fonts . . . . . . . . . . . . . . . . . . . . . .61
2.8.1 Calling Digits . . . . . . . . . . . . . .61
2.8.2 Text Editor . . . . . . . . . . . . . . . .61
2.9 Language . . . . . . . . . . . . . . . . . . .61
2.0 Power Saver . . . . . . . . . . . . . . . .61
2.* Status Light . . . . . . . . . . . . . . . . .61
3. System . . . . . . . . . . . . . . . . . . . . . . . .62
3.1 Select System . . . . . . . . . . . . . . .62
3.2 Set NAM . . . . . . . . . . . . . . . . . . .62
3.3 Auto NAM . . . . . . . . . . . . . . . . . .62
1. Images . . . . . . . . . . . . . . . . . . . . . . . .52
2. Sounds . . . . . . . . . . . . . . . . . . . . . . .52
3. Msg Objects . . . . . . . . . . . . . . . . . . .53
Tools . . . . . . . . . . . . . . . . . . . . . . . . . .53
Access and Options . . . . . . . . . . . . .53
1. Schedule . . . . . . . . . . . . . . . . . . . . . .54
2. Alarm Clock . . . . . . . . . . . . . . . . . . .54
3. Voice Memo . . . . . . . . . . . . . . . . . . .55
To Playback a Voice Memo . . . . . . .55
4. My Shortcut . . . . . . . . . . . . . . . . . . .55
5. Notepad . . . . . . . . . . . . . . . . . . . . . .55
Viewing a Notepad Entry . . . . . . . . .56
6. Ez Tip Calc . . . . . . . . . . . . . . . . . . . .56
7. Calculator . . . . . . . . . . . . . . . . . . . .56
8. World Clock . . . . . . . . . . . . . . . . . . .56
Voice . . . . . . . . . . . . . . . . . . . . . . . . . .45
1. Voice Commands . . . . . . . . . . . . . .45
2. Sound Modes . . . . . . . . . . . . . . . . .46
3. Announce Alerts . . . . . . . . . . . . . . .46
4. Best Match . . . . . . . . . . . . . . . . . . .46
5. Train Words . . . . . . . . . . . . . . . . . . .47
6. Help . . . . . . . . . . . . . . . . . . . . . . . . . .47
Get It Now . . . . . . . . . . . . . . . . . . . . .47
1. Get It Now . . . . . . . . . . . . . . . . . . . .48
2. Get Information . . . . . . . . . . . . . . .49
Settings . . . . . . . . . . . . . . . . . . . . . . . .57
Access and Options . . . . . . . . . . . . .57
1. Sounds . . . . . . . . . . . . . . . . . . . . . . .57
1.1 Ringers . . . . . . . . . . . . . . . . . . . . .57
1.2 Key Tone . . . . . . . . . . . . . . . . . . .57
1.3 Volume . . . . . . . . . . . . . . . . . . . . .58
1.4 Message Alerts . . . . . . . . . . . . . .58
1.5 Service Alerts . . . . . . . . . . . . . . .58
1.5.1 Service Change . . . . . . . . . . .58
1.5.2 ERI Sounds . . . . . . . . . . . . . .58
Mobile Web . . . . . . . . . . . . . . . . . . . .49
Access and Options . . . . . . . . . . . . .49
1. Start Browser . . . . . . . . . . . . . . . . .50
Ending a MiniBrowser Session . . . .50
2. Web Messages . . . . . . . . . . . . . . . .51
3. Web Alerts . . . . . . . . . . . . . . . . . . . .51
Media . . . . . . . . . . . . . . . . . . . . . . . . .52
Access and Options . . . . . . . . . . . . .52
VX4650 5
Contents
3.4 Serving System . . . . . . . . . . . . . .62
Exposure to Radio Frequency Signal 68
Antenna Care . . . . . . . . . . . . . . . . . . .68
Phone Operation . . . . . . . . . . . . . . . .68
Tips on Efficient Operation . . . . . . . .68
10 Driver Safety Tips . . . . . . . . . . . .79
Consumer Information on SAR . .81
Accessories . . . . . . . . . . . . . . . . . . . . .83
4. Security . . . . . . . . . . . . . . . . . . . . . . .63
4.1 Lock Phone . . . . . . . . . . . . . . . . .63
4.2 Restrict Calls . . . . . . . . . . . . . . . .63
4.3 Emergency #s . . . . . . . . . . . . . .63
4.4 Change Lock . . . . . . . . . . . . . . . .64
4.5 Erase Contacts . . . . . . . . . . . . . .64
4.6 Reset Default . . . . . . . . . . . . . . .64
5. Call Setup . . . . . . . . . . . . . . . . . . . . .64
5.1 Auto Retry . . . . . . . . . . . . . . . . . .64
5.2 Answer Call . . . . . . . . . . . . . . . . .65
5.3 Auto Answer . . . . . . . . . . . . . . . .65
5.4 One-Touch Dial . . . . . . . . . . . . . .65
5.5 Voice Privacy . . . . . . . . . . . . . . . .65
5.6 Auto Volume . . . . . . . . . . . . . . .66
5.7 TTY Mode . . . . . . . . . . . . . . . . . .66
6. Data Settings . . . . . . . . . . . . . . . . . .66
6.1 Data/Fax . . . . . . . . . . . . . . . . . . . .66
6.2 PC Connection . . . . . . . . . . . . . .67
7. Location . . . . . . . . . . . . . . . . . . . . . .67
8. Phone Info . . . . . . . . . . . . . . . . . . . .67
8.1 My Phone Number . . . . . . . . . . .67
8.2 S/W Version . . . . . . . . . . . . . . . . .67
8.3 Icon Glossary . . . . . . . . . . . . . . . .67
8.4 Shortcut Help . . . . . . . . . . . . . . .67
Warranty Information . . . . . . . . . . . .84
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Driving . . . . . . . . . . . . . . . . . . . . . . . .69
Electronic Devices . . . . . . . . . . . . . . .69
Pacemakers . . . . . . . . . . . . . . . . . . . .69
Hearing Aids . . . . . . . . . . . . . . . . . . .69
Other Medical Devices . . . . . . . . . . .69
Health Care Facilities . . . . . . . . . . . . .70
Vehicles . . . . . . . . . . . . . . . . . . . . . . .70
Posted Facilities . . . . . . . . . . . . . . . . .70
Aircraft . . . . . . . . . . . . . . . . . . . . . . . .70
Blasting Areas . . . . . . . . . . . . . . . . . .70
Potentially Explosive Atmosphere . .70
For Vehicles Equipped with an Air
Bag . . . . . . . . . . . . . . . . . . . . . . . . . . .70
Safety Information . . . . . . . . . . . . . . .71
Charger and Adapter Safety . . . . . . .71
Battery Information and Care . . . . . .71
Explosion, Shock, and Fire Hazards .71
General Notice . . . . . . . . . . . . . . . . . .72
FDA Consumer Update . . . . . . . . . .73
6 VX4650
Welcome
Thank you for choosing the advanced and compact VX4650
cellular phone, designed to operate with the latest digital
mobile communication technology, Code Division Multiple
Access (CDMA) and Advanced Mobile Phone Service
(AMPS). Along with the many advanced features of the
CDMA system, such as greatly enhanced voice clarity, this
phone offers:
FCC Part 15 Class B Compliance
This device and its accessories comply with part 15 of FCC
rules. Operation is subject to the following two conditions:
(1) This device and its accessories may not cause harmful
interference, and (2) this device and its accessories must
accept any interference received, including interference
that causes undesired operation.
G Large, easy-to-read, 7-line backlight LCD with status
icons.
Technical Details
G Paging, messaging, voice mail, and caller ID.
G 18-key keypad.
G Speaker phone feature.
G Menu-driven interface with prompts for easy operation
and configuration.
G Any key answer, auto answer, auto retry, one-touch and
speed dialing with 99 memory locations.
G Bilingual (English and Spanish) capabilities.
The VX4650 is an all digital phone that operates on both
Code Division Multiple Access (CDMA) frequencies:
cellular services at 800 MHz and Personal Communication
Services (PCS) at 1.9 Ghz. Also, the VX4650 works on
Advanced Mobile Phone Service (AMPS). We call it a tri-
mode phone. Since the phone operates on Cellular, PCS
and AMPS, the call fail rate is less than on a conventional
dual-mode or singlemode phone.
CDMA technology uses a feature called DSSS (Direct
Sequence Spread Spectrum) that enables the phone to
keep communication from being crossed and to use one
frequency channel by multiple users in the same specific
area. This results in a 10-fold capacity increase when
compared with analog mode. In addition, features such as
soft / softer handoff, hard Handoff, and dynamic RF power
Important Information
This user’s guide provides important information on the use
and operation of your phone. Please read all the information
carefully prior to using the phone for the best performance
and to prevent any damage to or misuse of the phone. Any
unapproved changes or modifications will void your warranty.
VX4650 7
Welcome
control technologies combine to reduce call interruptions.
The Cellular and PCS CDMA networks consist of MSO
(Mobile Switching Office), BSC (Base Station Controller),
BTS (Base Station Transmission System), and MS (Mobile
Station). The following table lists some major CDMA
standards.
CDMA
Designator
Description
Standard
CDMA Dual-Mode Air Interface
14.4kbps radio link protocol and
inter-band operations
IS-95 adapted for PCS frequency
band cdma2000 1xRTT
AirInterface
Advanced Mobile Phone Service
TIA/EIA-95A
TSB-74
ANSI J-STD-008
TIA/EIA-IS2000
ANSI TIA/EIA
553A
Basic Air
Interface
TSB -74: Protocol between an IS-95A system and ANSI
J-STD-008
*
MAS-BS
PCSC-RS
Intersystem operations
Nom-signaling data comm.
TIA/EIA/IS-634
TIA/EIA/IS/651
TIA/EIA/IS-41-C
TIA/EIA/IS-124
1xRTT system receives twice as many subscribers in the
wireless section as IS-95. Its battery life is twice as long as
IS-95. High-speed data transmission is also possible.
Network
Service
TIA/EIA/IS-96-B Speech CODEC
TIA/EIA/IS-99
TIA/EIA/IS-637
TIA/EIA/IS-657
IS-801
Async Data and Fax
Short message service
Packet Data
Position Determination
Service (gpsOne)
TIA/EIA/IS-707-A High Speed Packet Data
Cellular base station
Cellular mobile station
PCS personal station
PCS base station
TIA/EIA/IS-97
TIA/EIA/IS-98
ANSI J-STD-018
ANSI J-STD-019
TIA/EIA/IS-125
Performance
Speech CODEC
8 VX4650
FCC RF Exposure Information
distance between the user’s body and the back of the
phone and have not been tested for compliance with FCC
RF exposure limits.
WARNING! Read this information before operating the
phone.
In August 1996, the Federal Communications Commission
(FCC) of the United States, with its action in Report and
Order FCC 96-326, adopted an updated safety standard for
human exposure to Radio Frequency (RF) electromagnetic
energy emitted by FCC regulated transmitters. Those
guidelines are consistent with the safety standard
previously set by both U.S. and international standards
bodies.
Vehicle-Mounted External Antenna
(Optional, if available.)
A minimum distance of 8 inches (20 cm) must be
maintained between the user / bystander and the vehicle-
mounted external antenna to satisfy FCC RF exposure
requirements. For more information about RF exposure,
visit the FCC website at www.fcc.gov.
The design of this phone complies with the FCC guidelines
and these international standards.
Caution
Use only the supplied and approved antenna. Use of
unauthorized antennas or modifications could impair call
quality, damage the phone, void your warranty and/or
result in violation of FCC regulations.
Do not use the phone with a damaged antenna. If a
damaged antenna comes into contact with the skin a
minor burn may result. Contact your local dealer for a
replacement antenna.
Bodily Contact During Operation
This device was tested for typical use with the back of the
phone kept 3/4 inches (2 cm) from the body. To comply with
FCC RF exposure requirements, a minimum separation
distance of 3/4 inches (2 cm) must be maintained between
the user’s body and the back of the phone, including the
antenna, whether extended or retracted. Third-party belt-
clips, holsters, and similar accessories containing metallic
components should not be used. Avoid the use of
accessories that cannot maintain 3/4 inches (2 cm)
VX4650 9
Phone Overview
1. Earpiece
17
2. Flip Flip open the case to answer an incoming call and close
to end the call.
3. LCD Screen Displays messages and indicator icons.
4. Left Soft Key Use to display the function setting menu.
5. Side Keys Use to adjust the ringer volume in Main Menu
Screen and the earpiece volume during a call.
6. Send Key Use to place or answer calls.
7. Voice Command Key Use for access to Voice Commands and
Driving Mode.
1
2
3
8. Manner Mode Key Use to set the Manner Mode (from Main
Menu Screen press and hold
for about 3 seconds).
9
9. Right Soft Key Use to select an action within a menu.
10. Navigation Key Use for quick access to Messages, My
Shortcut, Get It Now and Mobile Web.
11. Speakerphone Key Use to set the Speaker Phone Mode.
12. End/Power Key Use to turn the power on/off and to end a call.
Also use to return to the main menu display screen.
13. Clear Key Press to delete a single space or character. Press
and hold to delete entire words. Press this key once in a menu
to go back one level.
10
4
11
5
6
7
12
13
14. Alphanumeric Keypad Use to enter numbers and characters
and select menu items.
15. Lock Mode Key Use in Main Menu Screen to set the lock function
14
8
15
by pressing and holding the key
16. Microphone
17. Headset Jack
for about 3 seconds.
16
10 VX4650
Menus Overview
Contacts
1. List Contacts
2. New Number
3. New E-mail
4. Groups
5. Speed Dials
6. My VCard
Messages
1. Voice Mail
2. New Message
3. Inbox
4. Outbox
Voice
1. Voice Commands
2. Sound Modes
3. Announce Alerts
4. Best Match
5. Train Words
6. Help
5. Saved
6. Msg Settings
1. Auto Save
2. Auto Erase
3. Callback #
4. Signature
5. Voice Mail #
6. Auto View
7. Entry Mode
8. Quick-Text
9. Auto Play
7. Erase All
1. Inbox
Get It Now
1. Get It Now
2. Get Information
Recent Calls
1. Dialed Calls
2. Received Calls
3. Missed Calls
4. Erase Calls
1. Dialed Calls
2. Received Calls
3. Missed Calls
4. All Calls
5. Call Timer
1. Last Call
2. Home Calls
3. Roam Calls
4. All Calls
Mobile Web
1. Start Browser
2. Web Messages
3. Web Alerts
2. Outbox
3. Saved
4. All
6. KB Counter
1. Received
2. Transmitted
3. Total
VX4650 11
Menus Overview
2. Restrict Calls
3. Emergency #s
4. Change Lock
5. Erase Contacts
6. Reset Default
Media
1. Images
2. Sounds
3. Msg Objects
1. Small Pictures
2. Large Pictures
3. My Pictures
4. Sounds
5. My Melodies
6. Animations
7. My Animations
Settings
1. Sounds
1. Ringers
2. Key Tone
5. Call Setup
3. Volume
1. Auto Retry
2. Answer Call
3. Auto Answer
4. One-Touch Dial
5. Voice Privacy
6. Auto Volume
7. TTY Mode
4. Message Alerts
5. Service Alerts
6. Power On/Off Tone
7. DTMF Length
2. Display
1. Banner
2. Backlight
3. Screens
4. Menu Style
5. Clocks
6. Theme Colors
7. Contrast
8. Fonts
9. Language
0. Power Saver
*. Status Light
3. System
1. Select System
2. Set NAM
3. Auto NAM
4. Serving System
4. Security
1. Lock Phone
6. Data Settings
1. Data/Fax
2. PC Connection
7. Location
8. Phone Info
1. My Phone Number
2. S/W Version
3. Icon Glossary
4. Shortcut Help
Tools
1. Schedule
2. Alarm Clock
1. Alarm 1
2. Alarm 2
3. Alarm 3
4. Quick Alarm
3. Voice Memo
4. My Shortcut
5. Notepad
6. Ez Tip Calc
7. Calculator
8. World Clock
12 VX4650
Getting Started with Your Phone
The Battery
Charging the Battery
To use the charger provided with your phone:
NOTE It is important to fully charge the battery before initial
use of the phone.
The phone comes with a rechargeable battery. Keep the
battery charged while not in use in order to maximize talk
and standby time. The battery charge level is shown at the
top of the LCD screen.
Warning! Use only the charger provided with the phone.
Using any charger other than the one included with the
VX4650 may damage your phone or battery.
1. Plug the round end of the adapter into the phone’s
charger jack and the other end into an electrical outlet.
2. The charge time varies depending upon the battery
level. The maximum charge time for a fully discharged
battery is 3.5 hours.
Installing the Battery
To install the battery, insert the battery into the opening on
the back of the phone. Put the battery cover on the battery
and push it slightly upwards.
Battery Charge Level
The battery charge level is shown at the top right of the
LCD screen. When the battery charge level becomes low,
the low battery sensor alerts you in three ways: sounding
an audible tone, blinking the battery icon, and displaying
LOW BATTERY WARNING! If the battery charge level
becomes exceedingly low, the phone automatically
switches off and any function in progress is not saved.
Removing the Battery
Turn the power off. While pressing the PUSH button on the
back of the phone, pull the battery cover downward and
remove it. Then remove the battery by pressing the upper
area of it.
Fully Charged
Fully Discharged
VX4650 13
Getting Started with Your Phone
Turning the Phone On and Off
Making Calls
Turning the Phone On
1. Make sure the phone is turned on. If not, press
about 3 seconds.
for
1. Install a charged battery or connect the phone to an
external power source such as a vehicle power
charger or hands-free car kit.
2. Enter the phone number (include the area code if
needed).
2. Press
up.
for a few seconds until the LCD screen lights
3. Press
.
lf the phone is locked, enter the lock code.
NOTE Like any other radio device, avoid any unnecessary
Call Failed - indicates the call did not go through.
Restricted - indicates outgoing calls are in restricted
mode.
contact with the antenna while your phone is on.
Turning the Phone Off
NOTE If the phone is restricted, you can only dial phone
numbers saved in the Emergency Numbers or your
Contacts. To turn off this function:
1. Press and hold
until the display turns off.
Signal Strength
Menu ->
Settings ->
Security -> Enter
Call quality depends on the signal strength in your area.
The signal strength is indicated on the screen as the
number of bars next to the signal strength icon: The more
bars, the better the signal strength. If the signal quality is
poor, move to an open area. If you are in a building, the
reception may be better near a window.
Lock Code ->
Restrict Calls -> Off -> OK
4. Press
to end the call.
Correcting Dialing Mistakes
If you make a mistake while dialing a number, press
once to erase the last digit entered, or hold down
for at least 2 seconds to delete all digits.
14 VX4650
Screen Icons
When the phone is powered on, the top line of the LCD screen displays icons indicating the status of the phone.
Signal strength indicator. The strength of the signal
received by the phone is indicaed by the number of
bars displayed.
Data Session
Alarm
Battery indicator. Indicates battery charge level.
In use indicator. A call is in progress.
* No icon indicates the phone is in
Main Menu Screen.
Manner mode
Analog indicator.
Silence all
No service indicator. The phone is not receiving a
system signal.
Digital indicator.
New text message indicator.
New voice mail indicator.
SSL
TTY
Location on mode.
Driving mode.
E911 only mode.
Announce mode.
New text and voice message indicator.
1x service indicator.
SSL
TTY
Roaming indicator. The phone is outside of the
home service area.
Announce alerts.
Speaker Phone On.
VX4650 15
Quick Access to Convenient Features
Redialing Calls
Manner Mode
Use Manner Mode in public places. When Manner Mode
is set, is displayed on the screen, the key tones are
silent, and the phone is set to vibrate.
1. Press twice to redial the last number you dialed.
The last 30 numbers are stored in the call history list and
you can also select one of these to redial.
Manner Mode Quick Activation
Receiving Calls
1. From Main Menu Screen press
for 3 seconds.
1. When the phone rings or vibrates, press
to answer.
Manner Mode Quick Cancellation
1. Press
to switch to Normal Mode.
NOTE If you press
or (the side keys) while the phone
is ringing, the ringing or vibration is muted for that call.
Lock Mode
Use Lock Mode to prevent others from using your phone.
When Lock Mode is set, your 4-digit password is required
to use the phone.
2. Press
twice to end the call.
NOTE The lock code/password is the last 4 digits of your
phone number. You can change to a new password
using the Security menu.
Lock Mode Quick Activation
1. From Main Menu Screen press
for 3 seconds.
Lock Mode Quick Cancellation
1. Press Right Soft Key
password.
Unlock then enter your 4-digit
16 VX4650
Mute Function
Adjusting Speaker On
The Mute function prevents the other party from hearing
your voice, but allows you to hear the other party.
During a call, press the Speakerphone key to quickly activate
Speaker On allowing your phone to function as a speaker box.
NOTE To cancel Speaker On, press Speakerphone Key
Mute Quick Activation
again.
1. Press Left Soft Key
Mute during a call.
Mute Quick Cancellation
Call Waiting
1. Press Left Soft Key
Unmute again.
Your cellular service may offer call waiting. While a call is
in progress, two beeps indicate another incoming call.
When call waiting is enabled, you may put the active call
on hold while you answer the other incoming call. Check
with your cellular service provider for information about
this function.
Volume Quick Adjustment
Use the side keys to adjust the earpiece and ringer
volumes. The upper key increases the volume and the
lower key decreases the volume.
1. Press
2. Press
to receive a waiting call.
G Earpiece volume can be adjusted during a call.
Ringer volume can be adjusted during a call.
again to switch between calls.
NOTE Key beep volume is adjusted through the Sounds
Caller ID
Volume (Menu -> 9 -> 1 -> 3).
Caller ID displays the phone number or name of the
incoming call. If the caller’s identity is stored in Contacts,
the name appears with the number. Check with your
service provider to ensure they offer this feature.
VX4650 17
Quick Access to Convenient Features
Speed Dialing
Voice Command Dialing
Speed dialing is a convenient feature that allows you to
make phone calls quickly and easily with a few keystrokes.
Your phone recalls the number from your Contacts,
displays it briefly, and then dials it. Speed Dial Number 1 is
assigned to Voice Mail by default, but you can change it.
Voice Command is a convenient feature that allows you to
activate certain feature quickly and easily by verbal
command. Using this Voice Commands, you can make
phone calls, confirm voice mail and missed calls, set
driving/announce mode, edit the contact entries and so on.
1. Press the Voice Command key ( ).
2. When prompted, say "Call Someone."
3. When prompted, say the name entered in your
contacts. The phone will ask you to confirm the name,
then dial the number associated with the Contact name.
Dialing Single Digit Speed Dials (from 2 to 9)
Press and hold the Speed Dial number.
OR
Enter the speed dial number and press
.
NOTE Another way to activate Voice Command is to set
Announce Mode/Driving Mode to on. When the flip is
opened you will be asked to say a command.
Dialing Double Digit Speed Dials (from 10 to 99)
Press the first digit and then press and hold the key of
the last digit.
OR
Enter the first and second digits and press
.
18 VX4650
Entering and Editing Information
Text Input Modes
There are five modes for entering text, numbers, special
characters, and punctuation. In a text entry field, pressing
Text Input
You can input and edit your Banner, Schedule, Contacts,
and messages.
Right Soft Key
pop-up list of text modes.
(or Left Soft Key
) displays a
Key Functions
Right Soft Key (Left Soft Key): Press to scroll
through the following text input modes:
T9Word (T9) Mode
Use to type text using one keystroke per letter. The phone
translates keystrokes into common words by using the
letters on each key and a compressed database.
(
)
T9Word -> Abc -> 123 -> Symbols -> Smiley.
Shift: Press to change case.
T9 text : T9Word -> T9WORD -> T9word
Abc text : Abc -> ABC -> abc
Abc (Multi-tap) Mode
Use to add words to the T9 database.
Next : In T9 mode, press to display other
matching words.
123 (Numbers) Mode
Use to type numbers using one keystroke per number.
Space : Press to complete a word and insert a
space.
Clear : Press to delete a single space or
character. Hold to delete words.
Symbols Mode
Use to insert special characters or punctuation. There are
39 special characters including “SP” which inserts a
space and “LF” which forces the text to the next line.
Punctuation : In T9 mode, press to insert
punctuation in a word and complete a
sentence.
NOTE When Key Tone is changed from Beep to English or
Spanish (Menu -> 9 -> 1 -> 2), the phone announces
the numbers pressed on the keypad.
VX4650 19
Entering and Editing Information
Changing Letter Case
Using Abc (Multi-tap) Text Input
Using T9 and Abc text input modes you can set the
1. Press Right (or Left) Soft Key
to change to Abc mode.
to change to T9Word
capitalization. Press
to reach the following:
2. Press
3. Press
to change to ABC Caps Lock.
Initial Cap (T9Word / Abc)
.
Only the first letter is capitalized and subsequent letters
are lower case.
LG is displayed.
Using T9 Mode Text Input
Caps Lock (T9WORD / ABC)
1. Press Right (or Left) Soft Key
mode.
All letters are capitalized.
Lower Case (T9word / abc)
2. Press
3. Press
4. Press
.
All letters are in lower case.
to complete the word and add a space.
Text Input Examples
.
Display the text modes and select a text mode:
Call the office. is displayed.
1. In a text entry field, press Right (or Left) Soft Key
display text modes.
to
2. Press
use.
to highlight the text input mode you want to
3. Press
to select the highlighted text input mode.
20 VX4650
Using the NEXT Key
Adding Words to the T9 Database
After you have finished entering a word, if the word
If a word is not in the T9 database, add it using Abc (Multi-
tap) mode text entry.
displayed is not the one you want, press
to display
additional choices of words from the database.
1. Press Right Soft (or Left) Key
(multi-tap) mode.
to change to Abc
1. Press
Good is displayed.
2. Press
.
2. Press
.
Bop is displayed.
.
3. Press Right Soft (or Left) Key
to add the word Bop to the T9 database.
to change to T9 mode
The display gives you additional choices such as:
Home, Gone, Hood, etc.
4. Press
to erase the existing word.
.
5. Press
cop is displayed.
6. Press
.
bop is displayed.
VX4650 21
Contacts in Your Phone’s Memory
Contacts Entries
5. Enter
number (up to 22 characters), then
press
a
name for the phone
This allows you to have easy access to your most frequently
dialed phone numbers. You may store up to 500 entries with
up to 5 phone numbers each. Each entry may be up to 22
characters. Each phone number may be up to 48 digits.
.
NOTE To skip name entry, press
to go to the next step.
The Basics of Storing Contacts Entries
A confirmation message is displayed briefly.
1. From Main Menu Screen, enter
the phone number you want to
save (up to 48 digits).
NOTE Press Left Soft Key
to further customize the Contact
entry or press to return to
Done
2. Press Left Soft Key
Save.
the Main Menu Screen.
6. Continue saving the entry as a
3. Use
press
to select a Label, then
.
Speed Dial, press
Speed Dial.
to select
Home / Home2 / Office / Office2 /
Mobile / Mobile2 / Pager / Fax /
Fax2 / None
7. Enter a Speed Dial digit (e.g., 2).
Use the keypad, then press or
use to highlight the Speed
4. Use
then press
to select Name entry,
.
Dial location, then press
.
New Name / Existing
8. Press Left Soft Key
Done to
further customize the Contact
entry or press to return to the
Main Menu Screen.
NOTE Use Existing to add another
phone number to
a
contact
already stored in memory.
22 VX4650
Options to Customize Your Contacts
4. Use
to select the Group, then press
.
No Group / Family / Friends / Colleagues / Business /
School
Once the basic phone number and name information is
stored in your Contacts, you can edit and customize each
entry.
5. Press Left Soft Key
Done to save the change.
1. Press Right Soft Key
Contacts and use
to
highlight the contact entry you want to edit, then press
.
NOTE Use Menu -> 1 -> 4 to change the name of a group,
add a group, and delete a group.
2. Press Left Soft Key
screen.
Edit to access the Edit Contact
Changing the Call Ringer
Allows you to identify who is calling, by setting different
ringers for different phone numbers in your Contacts. It is
automatically set to the default ringer when the Contact is
saved.
3. Use
to highlight the information you want to
customize, then press
.
Adding or Changing the Group
1. Press Right Soft Key
highlight an entry, then press
Contacts and use
to
Allows you to manage your Contacts entries by organizing
them into groups.
.
2. Press Left Soft Key Edit.
1. Press Right Soft Key
Contacts and use
to
3. Use
4. Use
to highlight Default Ringer, then press
.
highlight an entry, then press
.
to select the Ringer Type, then press
.
2. Press Left Soft Key Edit.
3. Use to highlight No Group, then press
5. Press Left Soft Key
Done to save the change.
.
VX4650 23
Contacts in Your Phone’s Memory
Changing the Message Ringer
Adding or Changing the Picture ID
Allows you to identify who is sending you a message, by
setting different ringers for different phone numbers in
your Contacts. It is automatically set to the default ringer
when the Contact is saved.
Allows the phone to display an image to identify the caller.
1. Press Right Soft Key
Contacts and use
to
highlight an entry, then press
.
2. Press Left Soft Key Edit.
to highlight Default, then press
1. Press Right Soft Key
highlight an entry, then press
2. Press Left Soft Key Edit.
3. Use to highlight Default Text Msg Ringer, then
press
4. Use
5. Press Left Soft Key
Contacts and use
to
3. Use
.
.
4. Press Right Soft Key
choices.
More to display additional
.
5. Use
press
to select one of the 34 images available, then
.
to select the Ringer Type, then press
Done to save the change.
.
6. Press Left Soft Key
7. Press Left Soft Key
Select.
Done to save the change.
Adding or Changing the Memo
Allows you to enter up to 32 characters as a memo to the
Contact entry.
Adding Speed Dial
1. Press Left Soft Key
Menu,
,
.
1. Press Right Soft Key
highlight an entry, then press
2. Press Left Soft Key Edit.
3. Use to highlight Memo, then press
Contacts and use
to
.
2. Highlight the number you want to set the speed dial to
be set to press
.
.
3. Select the contact you want to add the speed dial too
press
.
4. Enter text, then press
5. Press Left Soft Key
.
Done to save the change.
24 VX4650
Through Contacts
Editing Contacts Entries
Adding Another Phone Number
From the Main Menu Screen
1. From Main Menu Screen press Right Soft Key
Contacts. Your Contacts display alphabetically.
2. Use
then press
3. Press Left Soft Key
4. Use to highlight Add Number, then press
5. Enter the number, then press
6. Use to highlight a Label, then press
A confirmation message is displayed.
to highlight the Contact entry you want to edit,
.
1. From Main Menu Screen enter the phone number you
want to save (up to 48 digits).
Edit.
.
2. Press Left Soft Key
Save.
.
3. Use to highlight a Label, then press
.
.
Home / Home2 / Office / Office2 / Mobile / Mobile2 /
Pager / Fax / Fax2 / None
4. Use
5. Use
to highlight Existing, then press
.
to highlight the existing Contact entry, then
press
.
A confirmation message is displayed.
VX4650 25
Contacts in Your Phone’s Memory
Editing Stored Phone Numbers
Default Numbers
The phone number saved when a Contact is created is the
Default Number. If more than one number is saved in a
Contact entry, another number can be designated as the
Default Number.
1. Press Right Soft Key
Contacts alphabetically.
Contacts to display your
2. Use
then press
3. Press Left Soft Key
4. Use to highlight the phone number, then press
to highlight the Contact entry you want to edit,
.
Changing the Default Number
Edit.
1. Press Right Soft Key
Contacts alphabetically.
Contacts to display your
twice.
5. Edit the phone number as necessary, then press
6. Use to confirm the Label, then press
.
2. Use
then press
3. Press Left Soft Key
4. Use to highlight the phone number you want to set
to highlight the Contact entry you want to edit,
.
.
A confirmation message is displayed.
Edit.
Editing Stored Names
as the Default Number, then press Right Soft Key
Options.
1. Press Right Soft Key
Contacts alphabetically.
Contacts to display your
5. Press
Set as Default #.
2. Use
then press
3. Press Left Soft Key
4. Use to highlight the name, then press
5. Edit the name as necessary, then press
6. Press Left Soft Key Done to save the change.
to highlight the Contact entry you want to edit,
A confirmation message is displayed.
.
Edit.
.
.
26 VX4650
Editing Customized Options
Deleting
Edit any of the Contacts options in the same manner as
when the Contact is created.
Deleting a Phone Number from a Contact
1. Press Right Soft Key
Contacts alphabetically.
Contacts to display your
1. Press Right Soft Key
Contacts alphabetically.
Contacts to display your
2. Use
to highlight the Contact entry, then press
2. Use
to highlight the Contact entry you want to edit,
.
then press
.
3. Press Left Soft Key
4. Use to highlight the phone number to be deleted.
5. Press Right Soft Key Options.
Erase Number.
Erase Number.
Edit.
3. Press Left Soft Key
4. Use to highlight the information you want to
customize, then press
5. Edit the information as necessary, then press
6. Press Left Soft Key Done to save the change.
Edit.
.
6. Press
7. Press
.
A confirmation message is displayed.
VX4650 27
Contacts in Your Phone’s Memory
Deleting a Contact Entry
Deleting a Speed Dial
1. Press Right Soft Key
Contacts alphabetically.
Contacts to display your
1. Press Left Soft Key
2. Highlight the existing speed dial.
3. Press Right Soft Key Options.
Menu,
,
.
2. Use
then press
to highlight the Contact entry to be deleted,
.
4. Press
5. Press
Remove.
3. Press Right Soft Key
Options.
Erase Contact.
Erase.
Remove.
4. Press
5. Press
A confirmation message is displayed.
A confirmation message is displayed.
Additional Ways to Delete a Contact
At any time when your Contacts are displayed, the Right
Soft Key
entry.
Options allows you to erase the highlighted
28 VX4650
Phone Numbers With Pauses
6. Use
Hard Pause / 2-sec Pause
7. Enter additional number(s) (e.g., pin number or credit
card number), then press
8. Use to select a Label, then press
to select pause type, then press
.
When you call automated systems such as voice mail or
credit billing numbers, you often have to enter a series of
numbers. Instead of entering these numbers by hand, you
can store the numbers in your Contacts separated by
special pause characters (P, T). There are two different
types of pauses you can use when storing a number:
.
.
9. Enter a name (up to 22 characters).
A confirmation message is displayed.
Hard Pause (P)
Adding a Pause to an Existing Number
The phone stops dialing until you press Left Soft Key
Release to advance to the next number.
1. Press Right Soft Key
Contacts alphabetically.
Contacts to display your
2-sec Pause (T)
2. Use
press
3. Press Left Soft Key
4. Use to highlight the number then press
times.
5. Press Right Soft Key
6. Press Hard pause or
7. Enter additional number(s), then press
8. Use to confirm the Label, then press
A confirmation message is displayed.
to highlight the Contact entry to edit, then
The phone waits 2 seconds before sending the next string
of digits.
.
Edit.
Storing a Number with Pauses
2
1. Press Left Soft Key
Menu.
Pause.
2. Press
3. Press
Contacts.
New Number.
2-sec pause.
.
4. Enter the number.
.
5. Press Right Soft Key
Pause.
VX4650 29
Contacts in Your Phone’s Memory
Searching Options
Searching Your Phone’s Memory
The VX4650 phone is able to perform a dynamic search of
the contents in your phone’s memory. A dynamic search
compares entered letters or numbers against the entries in
your Contacts. A matching list is displayed in descending
order. You can then select a number from the list to call or
edit. There are several ways to search:
G Scrolling Alphabetically
G Searching by Letter
G Searching by Options
1. Press Right Soft Key
2. Press Right Soft Key
Contacts.
Options.
3. Select the search criteria (use
press the corresponding number on the keypad):
then press
, or
Find Name - Enter the character(s) to search for
(such as the first letter(s) of the name).
Find Number - Enter the number(s) to search.
- Find Name
- Find Speed Dial
- Find E-mail
- Find Number
- Find Group
Find Speed Dial - Enter the speed dial number(s)
to search.
Find Group - Use
search for, then press
to highlight the group to
.
Scrolling Through Your Contacts
Find E-mail - Enter the e-mail address to search.
1. Press Right Soft Key
Contacts alphabetically.
Contacts to display your
4. When the list of matches is displayed, use
highlight a matched entry.
to
2. Use
to scroll through the list.
5. Press
place a call.
to see more information or press
to
Searching by Letter
1. Press Right Soft Key
Contacts alphabetically.
Contacts to display your
2. Press (or press repeatedly) the key on the keypad that
corresponds with the search letter.
30 VX4650
Making a Call From Your Phone’s Memory
Once you have stored phone numbers in your Contacts,
you can place calls to those numbers quickly and easily.
4. Use
to select the phone number.
to place the call.
5. Press
G By pressing
Contacts or Recent Calls and highlighting it.
G Use Speed Dialing
after searching for a phone number in
Speed Dialing
For a single-digit Speed Dial, press and hold the digit or
press the digit, then press . For a double-digit Speed
Dial, press the first digit and hold the second digit or press
G Use Voice Command Dialing
the first and second digits, then press
.
From Contacts
1. Press Right Soft Key
Contacts alphabetically.
Contacts to display your
Prepending a Stored Number
Prepend can be used if you are out of your home system
area and need to add the area code to an existing number
in your phone's memory. When a Contacts entry or
message callback number is displayed, you can add to the
beginning of the original number. However, you cannot edit
the original number.
2. Use
3. Use
4. Press
to select the Contact entry, then press
.
to select the phone number.
to place the call.
From Recent Calls
1. Recall a number in your Recent Calls (Dialed, Received,
or Missed).
1. Press Left Soft Key
Menu.
2. Press Right Soft Key
3. Press Prepend.
4. Enter the prepend digits to the phone number.
5. Press to place the call.
Options.
2. Press
3. Use
Recent Calls.
to select the type of recent call, then press
.
Dialed Calls/Received Calls/Missed Calls/Erase Calls/
Call Timer/KB Counter
VX4650 31
Using Phone Menus
Menu Access
Press Left Soft Key
Menu to access nine phone
Contacts
menus. There are two methods of accessing menus and
submenus:
The Contacts Menu allows you to store names, phone
numbers and other information in your phone’s memory.
When you access your Contacts, the number in
parentheses represents the number of entries you have
stored (up to 500).
G
Use the navigation key to highlight and select, or
G
Press the number key that corresponds to the menu (or
submenu).
For example:
Access and Options
1. Press Left Soft Key
items.
Menu to display nine menu
1. Press Left Soft Key
Menu.
2. Press
Contacts.
Use
to scroll through the list of menus.
3. Select a sub-menu.
2. Press the appropriate number key corresponding to the
menu item you want to select.
1. List Contacts
The sub-menu list will be displayed.
2. New Number
3. New E-mail
4. Groups
3. Press the appropriate number key corresponding to the
sub-menu you want to access.
4. Use
to highlight your preferred setting, then press
to select it.
5. Speed Dials
6. My VCard
NOTE Press
to go back one step (while accessing
a menu or selecting a setting). Changes to settings
will not be saved.
32 VX4650
Contacts
3. Select the Label you want and press
4. Enter the name, then press
.
1. List Contacts
Allows you to view your Contacts list.
.
1. Press
,
,
.
5. Continue saving the entry as necessary.
2. Options from here:
3. New E-mail
G
Press
to scroll through your Contacts
alphabetically.
Allows you to save a new e-mail address.
G
G
Press Right Soft Key
following:
Options to select one of the
NOTE Using this sub-menu, the e-mail is saved as a new
Contact. To save the e-mail into an existing Contact,
edit the Contact entry.
Find Name / Find Number / Find Speed Dial / Find
Group / Find E-mail / Send Message / Erase
Press Left Soft Key
or New E-mail.
New to store a New Number
1. Press
2. Enter the e-mail address, then press
3. Enter the name, then press
4. Continue saving the entry as necessary.
,
,
.
.
.
2. New Number
Allows you to add a new number to your Contacts
NOTE Using this sub-menu, the number is saved as a new
Contact. To save the number into an existing
Contact, edit the Contact entry.
1. Press
,
,
.
2. Enter the number, then press
.
VX4650 33
Using Phone Menus
4. Groups
5. Speed Dials
Allows you to view your grouped Contacts, add a new
group, change the name of a group, or delete a whole
group.
Allows you to view your Speed Dials list, designate new
Speed Dials, or remove Speed Dial designations entered in
your Contacts.
1. Press
,
,
.
1. Press
,
,
.
2. Options from here:
2. Use
to highlight the Speed Dial position (or enter
the Speed Dial digit), then press
.
G
Use
to highlight a group to view, then press
.
3. Use
4. Use
to highlight the Contact, then press
to highlight the number, then press
.
G
G
Press Left Soft Key
the list.
Add to add a new group to
.
A confirmation message is displayed.
Use
Key
to highlight a group, then press Right Soft
Options to change the name of the group
6. My VCard
or delete the group.
Allows you to enter your own virtual business card to be
used in text messages.
1. Press
,
,
.
2. Use
press
to select the feature you want to edit, then
.
3. Edit the information as necessary.
NOTE You cannot edit phone number, but you can add an
additional phone number.
34 VX4650
Recent Calls
1. Dialed Calls
2. Received Calls
3. Missed Calls
4. Erase Calls
5. Call Timer
Recent Calls
The Recent Calls Menu is a list of the last phone numbers
or Contact entries for calls you placed, accepted, or
missed. It is continually updated as new numbers are
added to the beginning of the list and the oldest entries are
removed from the bottom of the list.
6. KB Counter
NOTE To view a quick list of all your recent calls, press
from the Main Menu.
G
indicates a dialed call.
1. Dialed Calls
G
indicates a received call.
Allows you to view the list of outgoing calls; up to 30
entries.
G
indicates a missed call.
Access and Options
1. Press
2. Use
,
,
.
to highlight an entry.
to view the entry.
1. Press Left Soft Key
Menu.
G
Press
2. Press
Recent Calls.
G
Press
to place a call to the number.
3. Select a sub-menu.
G
Press Right Soft Key
Options (for call lists) to select
Save / Send Message / Prepend / Erase / Erase All
G
Press
to return to the Main Menu Screen.
VX4650 35
Using Phone Menus
2. Received Calls
5. Call Timer
Allows you to view the list of incoming calls; up to 30
entries.
Allows you to view the duration of selected calls.
1. Press
,
,
.
1. Press
2. Use
,
,
.
2. Use
to highlight a call list, then press
.
to highlight an entry.
Last Call / Home Calls / Roam Calls / All Calls
3. Missed Calls
6. KB Counter
Allows you to view the list of missed calls; up to 30 entries.
Allows you to view the list of received and transmitted data
calls.
1. Press
2. Use
,
,
.
1. Press
,
,
.
to highlight an entry.
2. Use
to highlight a data call list, then press
.
Received / Transmitted / Total
4. Erase Calls
Allows you to erase selected call list(s).
1. Press
,
,
.
2. Use
.
to highlight the list of calls to erase, then press
Dialed Calls / Received Calls / Missed Calls / All Calls
3. Press
Erase or
Cancel.
36 VX4650
Messages
Text messages, pages, and the voice mail box become
available as soon as the phone is powered on.
Messages
G
Check types of messages by pressing the message key
Short Cut Press the navigation key downward
.
to access messages.
G
Make a call to the callback number by pressing
Access and Options
during an Inbox message check.
G
1. Press Left Soft Key
Menu.
Read and edit messages saved in the outbox after
transmission and resend them.
2. Press
Messages.
The phone can store up to 116 messages (1 voice
message, 50 inbox text messages, 50 outbox text
messages, 15 saved text messages). The VX4650 supports
up to 160 characters per message including header
information. The information stored in the message is
determined by phone mode and service capability. Other
limits to available characters per message may exist.
Please check with your service provider for system
features and capabilities.
3. Select a sub-menu.
1. Voice Mail: Shows the number of
messages in voice mail box.
2. New Message: Sends a message.
3. Inbox: Shows the list of received
messages.
4. Outbox: Shows the list of sent
messages.
5. Saved: Shows the list of saved and
draft messages.
6. Msg Settings: Selects alert type
for new messages.
7. Erase All: Deletes all stored
messages.
VX4650 37
Using Phone Menus
New Message Alert
2. New Message
There are three ways your phone alerts you to new
messages.
Allows you to send text messages, EMS messages, pages,
and e-mail transmissions. Each message has a destination
(Address 1) and information (Message). These are
dependent upon the type of message you want to send.
The Basics of Sending a Text Message
1. The phone displays a message on the screen.
2. One of eight ring types is heard, if selected.
3. The message icon (
) is displayed on the screen. In
1. Press
,
,
.
the case of an urgent message, the icon will flash and
Urgent message is displayed.
2. With the highlight on Address 1, press
3. Enter the recipient's address, then press
NOTE To send a page, press Left Soft Key
.
NOTE If you receive the same message twice, your phone deletes
.
the older one and the new one is stored as a Duplicate.
now.
4. Press
5. Type your message (text or e-mail), then press
6. Press Left Soft Key Send.
A confirmation message is displayed.
to access the message screen.
1. Voice Mail
.
Allows you to view new voice messages recorded in the
voice mail box. Your phone will alert you when you receive
a new voice message.
Checking Your Voice Mail Box
1. Press
,
,
.
2. Options from here:
G
Press Left Soft Key
Clear to delete information, then
select Clear Count.
G
Press
to listen to the message(s).
38 VX4650
Messages
Customizing the Text Message Using Options
Using Contacts to Send a Text Message
You can designate an entry saved in your Contacts as
Address 1 instead of manually entering the destination.
1. Create a new message.
2. Press Right Soft Key
Options.
1. Press
2. Press Left Soft Key
3. Select Contacts / Recent Calls / Recent Addresses.
,
,
.
3. Select the option(s) to customize.
Contacts.
Send
Sends the message.
Priority
Gives priority to the message.
Normal / Urgent.
then press
.
Callback #
Inserts a pre-programmed callback
number with your message.
On / Off / Edit
4. Use
to highlight the Contact entry containing the
destination, then press
5. Use to highlight the SMS phone number or e-mail
address, then press
.
Delivery Notice Informs you that the message has been
successfully delivered to the recipient.
Enhanced / Normal
.
NOTE The Address 1 feature allows multi-sending of up to
Save Message Saves the message into the saved
folder.
10 addresses.
Erase Field
Deletes address or contents of message
field.
6. Complete the message as necessary.
4. Complete and send the message.
VX4650 39
Using Phone Menus
Text Options
Message Icon Reference
While you are composing the text of a message you can
insert customized text.
Sent : Messages sent in Short Message Center(SMC)
have been transmitted.
1. Create a new message.
Fail : Indicates a failed message transmission.
Delivery : Message has been delivered.
Lock : Indicates that messages are locked.
2. Use
3. Press Right Soft Key
4. Select the option(s) to customize.
to highlight Message then press
.
Options.
Multi-sending : Indicates more than one designated
recipient.
Insert Quick-Text
Insert Object
Inserts 12 predefined phrases.
Inserts objects into the message.
Small Pictures / Large Pictures /
My Pictures / Sounds /
Pending : Transmission is unavailable in a no service
area or in an analog service area. Messages are
pending transmission. Pending messages are
transmitted automatically when digital mode becomes
available.
My Melodies / Animations /
My Animations
Format Text
Allows you to change the look of
the text.
Alignment / Font Size / Font Style /
Text Color / Background
Allows you to define phrases to
insert as Insert Quick Text.
Inserts a predefined signature.
Custom / My VCard
Save Quick-Text
Insert Signature
5. Complete and send or save the message.
40 VX4650
Messages
Erase
Deletes the selected message from the
Inbox.
Locks a message so that it is not erased
if the Erase Inbox or Erase All feature
are used.
3. Inbox
The phone alerts you in 3 ways when you receive a new
message by:
Lock/Unlock
G
Displaying a message notification on the screen.
G
Sounding a beep, vibrating or sound, if set.
3. Use
.
to highlight an Inbox message, then press
G
Displaying the message icon
the message is urgent.
. It blinks when
4. While viewing the selected message, press Left Soft
Received text messages, page messages, and e-mail lists
may be searched and the contents viewed. Received
messages are displayed from newest to oldest.
Key
Reply or Right Soft Key
Options.
Options from here:
Reply w Copy
Replies to the SMS with the original
message attached.
Forwards a received message to other
destination address(es).
Deletes the selected message from the
Inbox.
Stores the callback number, e-mail
address, and numbers in user data
included in the received message into
your Contacts.
Out of Memory Warning
If the memory is full, no more messages can be received
until enough memory space becomes available. The
message NOT ENOUGH MEMORY is displayed and new
messages are not accepted.
Viewing Your Inbox
Up to 50 received messages can be stored in the Inbox.
Forward
Erase
Save Address
1. Press
,
,
.
2. Use
to highlight an Inbox message.
Left Soft Key Reply.
Right Soft Key Options.
G
Save Object
Saves animations and sounds to be
used as wallpaper or ring tone.
G
VX4650 41
Using Phone Menus
Save Quick-Text Saves the message into the Quick-Text
3. Use
Erase
to highlight an Outbox message, then press
list.
. While viewing the selected Outbox message,
Save Message Saves Inbox message into the Saved
Folder.
press Left Soft Key
Send to or press Right Soft Key
Options.
Lock/Unlock
Locks or unlocks the selected message.
Locked messages can not be deleted by
the Erase Inbox or Erase All functions.
Deletes the selected message.
Save Address
Stores the callback number, e-mail
address, and numbers in user data
included in the received message into
your Contacts.
4. Outbox
Up to 50 sent messages can be stored in the Outbox. View
lists and contents of sent messages and verify whether the
transmission was successful or not.
Save Quick-Text Saves the message into the Quick-Text
list.
Save Message Saves Outbox message into the Saved
Folder.
1. Press
,
,
.
Lock/Unlock
Locks or unlocks the selected message.
Locked messages can not be deleted
by the Erase Outbox and Erase All
functions.
2. Use
to highlight an Outbox message.
Resend.
Options.
G
Press Left Soft Key
Press Right Soft Key
G
Message Info
Shows the message type priority and
status.
Erase
Deletes the selected message from the
Outbox.
Lock/Unlock Locks a message so that it is not erased if the
Erase Outbox or Erase All feature is used.
42 VX4650
Messages
Voice Mail #
Auto View
Edit Voicemail #
On / Off
5. Saved
Displays saved messages and draft messages.
1. Press
,
,
.
Entry Mode
T9Word / Abc / 123
2. Use
to highlight a Saved message.
Quick-Text Inserts 12 predefined phrases.
Auto Play On / Off
G
Press Left Soft Key
Press Right Soft Key
Resume.
Options.
G
Message Settings Sub-Menu Descriptions
6.1 Auto Save
Erase
Deletes the selected message.
Lock/Unlock Locks a message so that it is not erased if
the Erase Saved or Erase All feature is used.
Allows you to automatically save sent messages in your
Outbox. You can choose Auto Save, Prompt, or Do Not
Save.
6. Msg Settings
Allows you to configure 9 settings for received messages.
6.2 Auto Erase
1. Press
2. Use
,
,
.
With this feature on, read messages(except locked
messages) are automatically deleted when you exceed
the storage limit.
to highlight one of the settings and press
to select it.
Auto Save
Auto Erase
Callback #
Signature
Auto Save / Prompt / Do Not Save
On / Off
6.3 Callback #
Allows you to automatically send a designated callback
number when you send a message. Allows you to
manually enter the number.
Edit Callback #
None / Custom / My VCard
VX4650 43
Using Phone Menus
6.4 Signature
7. Erase All
Allows you designate a signature to automatically send
with your messages. You can create a custom signature
line or use your VCard.
Allows you to erase all text messages stored in your Inbox,
Outbox, or Saved messages folders. You can also erase all
messages at the same time.
1. Press
,
,
.
6.5 Voice Mail #
G
Press
Inbox.
Inbox to erase all messages stored in the
Outbox to erase all messages stored in
Saved to erase all messages stored in
Allows you to manually enter the number for Voice Mail
Service. This number should be only used when a VMS
access number is not provided from the network.
G
G
G
Press
the Outbox.
Press
6.6 Auto View
Allows you to directly display the content when receiving
a message.
the Saved messages folder.
Press
All to erase all messages stored in the
6.7 Entry Mode
Allows you to select the default input method.
Inbox, Outbox, and Saved messages folder.
2. Press
Erase All.
6.8 Quick-Text
A confirmation message is displayed.
Allows you to display, edit, and add text phrases. These
text strings allow you to reduce manual text input into
messages.
6.9 Auto Play
With this feature on, the display automatically scrolls
down while viewing messages.
44 VX4650
Voice
1. Voice Commands
Allows you to set how you activate voice recognition.
Voice
1. Press
2. Use
,
,
.
Allows you to select options for voice activation, announce
alerts and recognition results; and enables you to adapt
the phone to recognize your way of saying numbers.
Access and Options
to select a setting, then press
.
Flip Open
Activates voice recognition whenever
you flip open the phone. (When the phone
is already open, you activate voice
recognition by pressing the voice
command key.)
1. Press Left Soft Key
2. Press Voice.
3. Select a sub-menu.
Menu.
Side Key Only Activates voice recognition when you flip
open the phone and press the voice
command key.
1. Voice Commands
2. Sound Modes
3. Announce Alerts
4. Best Match
5. Train Words
6. Help
VX4650 45
Using Phone Menus
2. Sound Modes
Allows you to set Driving Mode/Announce Mode.
2. Use
On / Off
to select a setting, then press
.
1. Press
2. Use
,
,
.
NOTE When Announce Alerts is set,
is displayed on
to select a setting, then press
.
the screen.
Driving Mode / Announce Mode / Normal Mode
For example,
4. Best Match
After you say a name or a number, your phone displays the
recognition results—the name or number that best
matches the one you said—and asks you to confirm.
Select the number of results that you want your phone to
display.
1) Press Left Soft Key
Menu.
2) Main menu screen appears, phone announces
“Main menu”.
3) Then, phone announces the first menu item that is
highlighted.
1. Press
2. Use
,
,
.
4) When the cursor is moved, the highlighted menu item is
announced.
to select a setting, the press
.
1 Result Displays the name or number that best
matches the one you said.
5) Menu readout only to the first sub-level.
4 Results Displays the four names or numbers that best
match the one you said and asks you if the first
one is correct. If you say "Yes," the phone
makes the call. If you say "No," the phone
suggests the second one in the list, and so on,
up to the fourth result.
3. Announce Alerts
Allows you to notify caller ID and sender of message by
voice.
1. Press
,
,
.
46 VX4650
Get It Now
5. Train Words
Get It Now
Command Train is an optional personalization feature that
helps your phone recognize the way you pronounce
commands. If you do not get consistently good results with
the commands, perform this brief, one-time session.
Get It Now allows you to do more than just talk on your
phone. Get It Now is a technology and service that allows
you to download and use applications on your phone. With
Get It Now, it is quick and easy to personalize your phone
to your lifestyle and tastes. Just download the applications
that appeal to you. With a wide range of software
available, from ringtones to games to productivity tools,
you can be assured that you can find something useful,
practical, or down right entertaining.
1. Press
2. Select a sub-menu, then press
Commands / Digits / Yes, No / Contacts / Phone Label
3. Use to select a setting, then press
Training On / Training Off
,
,
.
.
.
Downloading Applications
6. Help
Helps you to use the Voice menu.
You can download applications and use Get It Now
anywhere on the Verizon Wireless network, as long as
your handset has
a
digital signal available. Most
1. Press
,
,
.
applications do not use a network connection while in use.
Incoming Calls
While downloading an application, incoming calls will
automatically be sent to your voice mail, if available. If you
do not have voice mail, downloading will not be interrupted
by an incoming call, and the caller will receive a busy
signal.
VX4650 47
Using Phone Menus
When using applications, an incoming call will
automatically pause the application and allow you to
answer the call. When you complete your call, you can
resume using the application.
1. Get It Now
Allows you to download selected applications while
displaying the Get It Now application list relayed from the
Get It Now server connection.
1. Press
2. Press
,
,
.
Access and Options
.
1. Press Left Soft Key
Menu.
3. Select [Get It Now] Icon and press
.
2. Press
Get It Now.
3. Options from here:
Short Cut
Press the navigation key right
access Get It Now.
to
1. Get It Now: To add, delete, or disable
Get It Now applications.
NOTE When the file memory is full, the message "File
Memory Full. To make enough storage space to install
this app, the following app(s) will be temporarily
disabled : You can restore disabled apps by simply
starting them, at no additional purchase cost.
Proceed?" will be displayed. If you select Yes, the
app(s) will be disabled.
2. Get Information: To view information
about Get It Now applications.
48 VX4650
Mobile Web
2. Get Information
Gives you information about the Get It Now selection key.
Mobile Web
Mobile Web 2.0 allows you to access news, sports,
weather, and email from your Verizon Wireless device.
Access and selections within this feature are dependent
upon your service provider. For specific information on Get
News & Info access through your phone, contact your
service provider.
1. Press
2. Press
,
,
.
.
Managing Your Get It Now Applications
Add new applications and remove old ones at any time.
Removing Applications
Access and Options
Only removing an application deletes it completely from
the memory of the phone. To restore an application once it
has been removed will require that you pay and download
it again.
1. Press Left Soft Key
Menu.
2. Press
Mobile Web.
3. Select a sub-menu.
1. Access Get It Now.
2. Select Settings.
1. Start Browser
2. Web Messages
3. Web Alerts
3. Use
4. Use
to highlight Manage Apps, then press
.
to highlight the application to be deleted,
.
then press
5. Select Remove.
VX4650 49
Using Phone Menus
Scrolling
1. Start Browser
Allows you to initiate a MiniBrowser session.
Use
to scroll through the content if the current page
does not fit on one screen. The currently selected item is
indicated by a cursor on the screen.
Short Cut
Press the navigation key left
web browsing.
to access
1. Press
,
,
.
Fast Scrolling
2. After a few seconds, you see the Home Page.
Press and hold
to quickly move the cursor up and
down on the current screen.
Ending a MiniBrowser Session
End a MiniBrowser session by pressing
.
Scrolling by Page
Press the Side Keys to move up and down a page at a time.
Navigating Through the Browser
On-screen items may be presented in one of the following
ways:
Home Page
Press and hold
or
to access the Home Page.
G
Numbered options
View Browser Menu
You can use your numeric keypad or you can select the
items by moving the cursor and pressing the
appropriate Soft Key(s).
Press and hold Voice Command Key ( ) to use the
Browser menu.
G
Links embedded in content
Soft Keys
You can act on the options or the links by using the Soft
Keys just below the display screen.
To navigate to different screens or select special
functions, use the Soft Keys. The function associated with
the Soft Keys can change for each page and depends on
each highlighted item.
G
Text or numbers
You can select the items by moving the cursor and
pressing the appropriate Soft Keys.
50 VX4650
Mobile Web
you are using supports the feature (the phone number may
Left Soft Key
be highlighted and Left Soft Key
appears as Call). The
Left Soft Key
is used primarily for first options or
browser connection is terminated when you initiate the
call. After you end the call, your phone returns to the
screen from which you initiated the call.
selecting an item but its function may change, depending
on the content displayed.
Right Soft Key
2. Web Messages
Right Soft Key
is used primarily for secondary options
Allows you to view Web messages. If there are any
browser messages, the list is displayed from newest to
oldest.
or a menu of secondary options.
Entering Text, Numbers, or Symbols
When prompted to enter text, the current text entry
1. Press
,
,
.
method appears above the Right Soft Key
Symbol, Number, Word, or Smart. To change the input
mode, press the Right Soft Key . To change to upper
as Alpha,
Your list of Web messages is displayed.
3. Web Alerts
case, press
. The text method appears above the
Allows you to select a browser alert sound.
Right Soft Key
as ALPHA, WORD, or SMART.
1. Press
2. Select an alert option.
Mute / 2 Beeps / 4 Beeps
,
,
.
Clearing Out Text/Number Entered
When entering text or numbers, press
last number, letter, or symbol. Press and hold
the input field completely.
to clear the
to clear
Initiating a Phone Call From MiniBrowser
You can make a phone call from MiniBrowser if the site
VX4650 51
Using Phone Menus
1. Images
Media
Allows you to choose an image downloaded to your phone
to display as the background image displayed on the
phone.
This menu allows you to download and use a wide variety
of images, sounds, and more.
1. Press
,
,
.
Access and Options
2. Use
select.
to highlight your selection, then press
to
1. Press Left Soft Key
2. Press Media.
3. Select a sub-menu.
1. Images
Menu.
2. Sounds
Allows you to choose the downloaded ring tones heard for
incoming calls.
2. Sounds
1. Press
,
,
.
3. Msg Objects
2. Use
select.
to highlight your selection, then press
to
52 VX4650
Tools
3. Msg Objects
Allows you to set objects to correspond with your
messages.
Tools
Your phone tools include a Schedule, Alarm Clock, Voice
Memo, My Shortcut, Notepad, Ez Tip Calc, Calculator, and
World Clock.
1. Press
,
,
.
2. Select one of the following (highlight and press
press corresponding key):
or
Access and Options
G
Small Pictures
1. Press Left Soft Key
2. Press Tools.
3. Select a sub-menu.
Menu.
G
Large Pictures
G
My Pictures
G
Sounds
1. Schedule
G
My Melodies
G
2. Alarm Clock
3. Voice Memo
4. My Shortcut
5. Notepad
Animations
G
My Animations
3. Use
to highlight your selection, then press
.
6. Ez Tip Calc
7. Calculator
8. World Clock
VX4650 53
Using Phone Menus
1. Schedule
2. Alarm Clock
Allows you to conveniently keep and access your
agenda(s). Simply store your appointments and your
phone will alert you with a reminder of your appointment.
Allows you to set one of four alarms. The current time is
displayed at the top of the screen when you select an
alarm to set. At the alarm time, Alarm 1 (or 2 or 3, as
applicable) will be displayed on the LCD screen and the
alarm will sound.
1. Press
2. Use
,
,
.
to highlight the scheduled day.
1. Press
,
,
.
Moves cursor to the left.
Moves cursor to the right.
Moves to the previous week.
Moves to the next week.
2. Select the alarm you want to edit.
Alarm 1 /
Alarm 2 /
Alarm 3 /
Quick Alarm
3. Use
4. Set the time for alarm and press
5. Use to highlight Once (recurring setting) and press
to highlight the alarm time then press
.
3. Press Left Soft Key
Add.
.
4. Enter your schedule information including:
.
G
G
G
G
G
G
G
Date
Voice
Time
Title/Information
Recurring event
6. Press
to select one of the following and press
.
When to ring the alarm reminder
Which ring alarm to sound
Once / Daily / Mon - Fri / Weekends
7. Use
8. Use
to highlight Ring (ring type setting) and press
5. Press Left Soft Key
Save.
.
NOTE Scheduler will not alert you during a call or during
SMS transmitting. It will sound the reminder after you
exit a call.
to select one of the available alarm ring types
.
and press
9. Press Left Soft Key
Save.
54 VX4650
Tools
3. Voice Memo
4. My Shortcut
Allows you to add, listen to, and erase short verbal
reminders.
Allows you to set a shortcut to Recent Calls, Contacts,
Tools, or Settings using the Up Navigation key.
1. Press
,
,
.
1. Press
,
,
.
An explanation message is displayed.
2. Press Left Soft Key
memo.
New to record a new voice
2. Press
to continue.
3. Talk into the microphone, then press Left Soft Key
Done or . The default memo title is the date and
3. Select the shortcut you want to set (press the
corresponding number or highlight it and press
).
time of recording.
4. While the highlight is still on the recording, press Right
5. Notepad
Soft Key
Options to access the following:
Allows you to add, read, edit, and erase notes to yourself.
1. Press
2. Press Left Soft Key
3. Type the note, then press
G
G
G
G
Edit Title
Memory Info
Erase
,
,
.
G
Set As
Add to write a new note.
Erase All
.
A confirmation message displays briefly, then displays
your list of notes.
To Playback a Voice Memo
1. Access Voice Memo, highlight the Voice Memo you
want to hear, then press
.
2. Press Left Soft Key Play.
VX4650 55
Using Phone Menus
G
G
G
G
G
G
G
Use keypad to enter numbers.
Viewing a Notepad Entry
1. Access Notepad and highlight the entry.
Use
Use
to enter decimals.
to enter plus/minus change.
2. To erase, press Right Soft Key
Options.
Press Left Soft Key to clear the entry.
G
Erase
Press Right Soft Key to enter algebraic operators.
Use Navigation Key to enter operators.
G
Erase All
To edit, highlight the entry, press
then press Left
Soft Key
Edit.
Press
to complete equation.
NOTE Calculations can be made with up to 29 characters
6. Ez Tip Calc
at one time (e.g., 63+78-21 would be 8 characters).
Allows you to quickly and easily calculate the amounts for
a bill with the amount of the bill, the amount of the tip, and
the number of people as variables.
8. World Clock
Allows you to determine the current time in another time
zone or country.
1. Press
,
,
.
1. Press
,
,
.
7. Calculator
Allows you to perform simple mathematical calculations.
You can enter numbers up to the second decimal place.
2. Press Right Soft Key
across the world map and display the date/time in that
location.
Cities to move the time bar
1. Press
,
,
.
NOTE Press Left Soft Key
Set DST to display Daylight
2. Enter data.
Savings Time in the selected location.
56 VX4650
Settings
1. Sounds
Options to customize the phone’s sounds.
Settings
The Settings menu has options to customize your phone.
1.1 Ringers
Allows you to assign ring tones for incoming calls.
1. Press
2. Select Caller ID / No Caller ID / Restricted Calls.
3. Use to select a ringer, then press
Access and Options
,
,
,
.
1. Press Left Soft Key
2. Press Settings.
3. Select a sub-menu.
1. Sounds
Menu.
.
NOTE Additional ring tones can be downloaded by visiting
www.vtext.com.
2. Display
3. System
1.2 Key Tone
4. Security
Allows you to select the Key Tone type.
1. Press
,
,
,
.
5. Call Setup
6. Data Settings
7. Location
8. Phone Info
2. Select a tone style, then press
.
Beep Sends out a beep sound, when you press the
keys.
English Sends out a voice (English), when you press
the keys.
Spanish Sends out a voice (Spanish), when you press
the keys.
VX4650 57
Using Phone Menus
1.3 Volume
1.5 Service Alerts
Allows you to set various volume settings.
1. Press
2. Select Ringer / Earpiece / Key Beep / Speaker Phone.
3. Use to adjust the volume of the ringer, then
press
Allows you to set any of the 5 Alert options to On or Off.
,
,
,
.
1. Press
,
,
,
.
2. Select an alert option.
1.5.1 Service Change
.
Alerts you when service changes. Displays Entering
Service Area or Leaving Service Area message.
1.4 Message Alerts
Allows you to select the alert type for a new message.
1.5.2 ERI Sounds
1. Press
,
,
,
.
Alerts you the status of cellular service.
2. Select Voice Mail / Text Message / E-mail / Page /
2-Min Reminder.
1.5.3 Minute Beep
Alerts you 10 seconds before the end of every minute
during a call.
3. Use
to select a setting, then press
.
1.5.4 Call Connect
Alerts you when the call is connected.
1.5.5 Back To Top
Alerts you when you scroll through the end of a menu
list.
3. Use
to set On or Off, then press
.
58 VX4650
Settings
1.6 Power On/Off Tone
2. Display
Allows you to set the phone to sound a tone when the
phone is powered on and off.
Options to customize the phone’s display screen.
2.1 Banner
1. Press
2. Use
,
,
,
.
Allows you to enter a string of up to 16 characters which
display on the LCD screen.
to set to On or Off, then press
.
1. Press
,
,
,
.
1.7 DTMF Length
2. Enter your banner text, then press
.
Allows you to set the Key tone length and touch tone
playback speed.
2.2 Backlight
1. Press
,
,
,
.
Allows you to set the duration for illuminating the backlight.
LCD and Key Light Timer are set separately.
2. Select an option, then press
.
Normal Sends out a tone for a fixed period of time
even if you keep the key pressed.
NOTE If an amount of time is set for the timer option, the
time starts after the last key was pressed.
Long
Sends out a continuous tone for as long as
you keep the key pressed.
2.2.1 LCD
1. Press
2. Choose a sub-menu, then press
Timer / Brightness
,
,
,
,
.
NOTE Dual-Tone Multi Frequency (DTMF) Signaling by the
simultaneous transmission of two tones, one from a
group of low frequencies and another from a group
of high frequencies. Each group of frequencies
consists of four frequencies. Setting the Key Beep
length to Long will extend the DTMF tone.
.
VX4650 59
Using Phone Menus
2.2.2 Key Light Timer
1. Press
2.5 Clocks
Allows you to choose the kind of clock to be displayed on
the LCD screen.
,
,
,
,
.
2. Choose a setting, then press
.
1. Press
,
,
,
.
2.3 Screens
2. Select Normal / Analog / Digital, then press
.
Allows you to choose the kind of background to be
displayed on the phone.
3. Press Left Soft Key
Save.
2.6 Theme Colors
1. Press
,
,
,
.
Allows you to choose the color of the background screen.
1. Press
2. Select Wallpaper / Power On / Power Off, then press
.
,
,
,
.
3. Select from different screens, then press
4. Left Soft Key Save.
.
2. Select Default / Green / Violet / Orange, then press
.
2.7 Contrast
Allows you to set the level of contrast for your LCD screen.
1. Press
2. Choose a Contrast sub-menu and press
Main LCD / Front LCD
to adjust the contrast level, then press
NOTE Right Soft Key
More, provides access to
additional choices.
,
,
,
.
.
2.4 Menu Style
Allows you to view the Menu as an Icon or List display.
1. Press
3. Use
.
,
,
,
.
2. Select Icon or List and press
.
60 VX4650
Settings
2.8 Fonts
2.0 Power Saver
Allows you to set the size and color of the font for calling
digits and text editor.
Display and buttons are lighted for a designated length of
time, allowing you the convenience to use your mobile
phone in the dark.
2.8.1 Calling Digits
1. Press
,
,
,
.
1. Select Size or Color sub-menu.
2. Use
press
to select 2 min / 10 min / 30 min / Off, then
.
Size or
Color
2. Press
save.
to choose a setting, then press
to
to
2. Status Light
*
Shows the status on your phone by blinking the light.
2.8.2 Text Editor
1. Press
2. Use
,
,
,
.
1. Select Size or Color sub-menu.
Size or Color
to choose a setting, then press
to set to On or Off, then press
.
2. Press
save.
2.9 Language
Allows you to set the bilingual feature according to your
preference. Choose between English and Spanish.
1. Press
2. Use
,
,
,
.
to select English or Spanish, then press
.
VX4650 61
Using Phone Menus
3.3 Auto NAM
3. System
Allows the phone to automatically switch between
programmed telephone numbers corresponding to the
service provider area.
The System menu allows you to designate specific system
network settings.
3.1 Select System
1. Press
2. Use
,
,
,
.
Allows you to set up the phone producer’s management
environment. Leave this setting as the default unless you
want to alter system selection as instructed by your
service provider.
to select On or Off, then press
.
3.4 Serving System
Identifies the channel number of a system that is served as
a SID Number. This information should only be used for
technical support.
1. Press
,
,
,
.
2. Use
.
to select Home Only, Automatic, then press
1. Press
,
,
,
.
3.2 Set NAM
Allows you to select the phone’s NAM (Number
Assignment Module) if the phone is registered with
multiple service providers.
1. Press
2. Use
,
,
,
.
to select NAM1 or NAM2, then press
.
62 VX4650
Settings
4.2 Restrict Calls
4. Security
Allows you to restrict outgoing calls. If you set this feature
to On, you can only place calls to emergency numbers and
phone numbers stored in your Contacts. You can still
receive calls in restrict mode.
The Security menu allows you to secure the phone
electronically.
4.1 Lock Phone
Keeps your phone from unauthorized use. Once the phone
is locked, it is in restricted mode until the lock code is
entered. You can receive phone calls and still make
emergency calls.
You can modify the lock code using the New Lock code
within the Security menu.
1. Press
,
,
.
2. Enter the four-digit lock code.
3. Press
4. Use
Restrict Calls.
to select On or Off, then press
.
4.3 Emergency #s
1. Press
,
,
.
Allows you to enter 3 emergency numbers. You can call
these emergency numbers and 911, even when the phone
is locked or restricted.
2. Enter the four-digit lock code.
The default lock code is commonly the last 4 digits of
your phone number.
1. Press
,
,
.
3. Press
Lock Phone.
2. Enter the four-digit lock code.
4. Use
Unlock
to select an option, then press
.
The phone is never locked (Lock mode can
be used).
The phone is always locked. When locked,
you can receive incoming calls and make
only emergency calls.
3. Press
4. Use
Emergency #s.
to select the emergency number position,
.
Lock
then press
5. Enter an emergency phone number, then press
.
On Power Up The phone is locked when it is turned on.
VX4650 63
Using Phone Menus
4.4 Change Lock
4.6 Reset Default
Allows you to enter a new four-digit lock code.
1. Press
2. Enter the four-digit lock code.
3. Press Change Lock.
Allows you to reset your phone to the factory default
settings.
,
,
.
1. Press
,
,
.
2. Enter the four-digit lock code.
3. Press
4. Press
5. Press
Reset Default.
4. Enter a new 4-digit lock code.
.
5. For confirmation, it will ask you to enter the new lock
code again.
Revert.
4.5 Erase Contacts
5. Call Setup
The Call Setup menu allows you to designate how the
phone handles both incoming and outgoing calls.
Allows you to erase all of your Contacts at once.
1. Press
2. Enter the four-digit lock code.
3. Press Erase Contacts.
,
,
.
5.1 Auto Retry
Allows you to set the length of time the phone waits before
automatically redialing a number when the attempted call
fails.
4. Select Erase all #s then press
.
1. Press
,
,
,
.
2. Use
to select a setting, then press
.
Off / Every 10 seconds / Every 30 seconds /
Every 60 seconds
64 VX4650
Settings
5.2 Answer Call
5.4 One-Touch Dial
Allows you to determine how to handle an answered call.
Allows you to initiate a speed dial call by pressing and
holding the speed dial digit. If set to Disable, Speed Dial
numbers designated in your Contacts will not function.
1. Press
,
,
,
.
2. Use
to select a setting, then press
.
1. Press
,
,
,
.
Flip Open / Any Key / SEND Only
2. Use
to select a setting, then press
.
5.3 Auto Answer
Enable / Disable
Allows you to select the number of rings before the phone
automatically answers a call. This feature is intended for
use with hands free devices, but is an independent feature
of the phone and must be manually turned on/off when
connected or disconnected from the device.
5.5 Voice Privacy
Allows you to set the voice privacy feature for CDMA calls
as Enhanced or Standard. CDMA offers inherent voice
privacy. Check with your service provider for availability.
1. Press
,
,
,
.
1. Press
,
,
,
.
2. Use
to select a setting, then press
.
2. Use
to select a setting, then press
.
G
Off
Enhanced / Standard
G
After 5 seconds When you have an incoming call,
the phone automatically responds after 5 seconds
with the flip opened.
VX4650 65
Using Phone Menus
5.6 Auto Volume
6. Data Settings
Provides a better audio experience by enabling the Auto
Volume feature to control the dynamic range and volume
of the sending and receiving voice across different levels
of speaker and environments.
This menu allows you to use wireless data communication
services. Wireless data communication services refers to
the utilization of subscriber terminals for access to the
internet with personal computers or laptops at 19.2 Kbps or
at a maximum of 230.4 Kbps. The connection speed
depends on your carrier’s network and other variables.
Check that communications information specifications
match the network.
1. Press
,
,
,
.
2. Use
to select a setting, then press
.
On / Off
5.7 TTY Mode
6.1 Data/Fax
Allows you to attach a TTY device enabling you to
communicate with parties also using a TTY device. A
phone with TTY support is able to translate typed
characters to voice. Voice can also be translated into
characters and then displayed on the TTY.
Allows you to use your phone to transmit data and faxes.
1. Press
,
,
,
.
2. Use
to select a setting, then press
.
Off / Fax In Once / Fax In Always / Data In Once /
Data In Always
1. Press
2. Press
3. Use
,
,
,
.
.
NOTE The Data Connection Kit allows you to connect your
PC or PDA to your LG wireless phone, freeing you
from having to locate a telephone outlet. You can
send or receive an e-mail, a fax, or access the
Internet anytime, anywhere.
to select a setting, then press
.
TTY Full / TTY + TALK / TTY + HEAR / TTY Off
66 VX4650
Settings
6.2 PC Connection
8. Phone Info
Allows you to select the data port.
The Phone Info menu provides you with specific
information pertaining to your phone model.
1. Press
,
,
,
.
2. Use
to select a setting, then press
.
8.1 My Phone Number
USB / RS-232C(COM Port) / Closed
Allows you to view your phone number.
1. Press
,
,
,
.
NOTE When using the 1X HSPD data service via an RS-
232C data cable, the port speed is set to 115,200
(230,400 is not supported). When using the 1X
HSPD data service via a USB data cable, you may
get better port speed if the port speed is set to
230,400 rather than 115,200.
8.2 S/W Version
Allows you to view the software, PRL, ERI.
1. Press
,
,
,
.
8.3 Icon Glossary
Allows you to view all the icons and their meanings.
1. Press
7. Location
,
,
,
.
Menu for GPS (Global Positioning System: Satellite
assisted location information system) mode.
8.4 Shortcut Help
1. Press
,
,
.
Allows you to view condensed information about using the
phone.
2. Use
to select a setting, then press
.
Location On / E911 Only
1. Press
,
,
,
.
NOTE GPS satellite signals are not always transmitted,
especially under bad atmospheric and environmental
conditions, indoors etc.
VX4650 67
Safety
industry reviewed the available body of research to
develop the ANSI Standard (C95.1).
TIA Safety Information
The following is the complete TIA Safety Information for
wireless handheld phones.
The design of your phone complies with the FCC guidelines
(and those standards).
Exposure to Radio Frequency Signal
Antenna Care
Your wireless handheld portable phone is a low power
radio transmitter and receiver. When it is ON, it receives
and also sends out radio frequency (RF) signals.
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the phone and may violate FCC
regulations.
In August, 1996, the Federal Communications Commissions
(FCC) adopted RF exposure guidelines with safety levels
for handheld wireless phones. Those guidelines are
consistent with the safety standards previously set by both
U.S. and international standards bodies:
Phone Operation
NORMAL POSITION: Hold the phone as you would any
other telephone with the antenna pointed up and over your
shoulder.
ANSI C95.1 (1992) *
NCRP Report 86 (1986)
ICNIRP (1996)
Tips on Efficient Operation
American National Standards Institute; National Council
on Radiation Protection and Measurements; International
Commission on Non-Ionizing Radiation Protection
For your phone to operate most efficiently:
Do not touch the antenna unnecessarily when the phone
is in use. Contact with the antenna affects call quality and
may cause the phone to operate at a higher power level
than otherwise needed.
Those standards were based on comprehensive and
periodic evaluations of the relevant scientific literature. For
example, over 120 scientists, engineers, and physicians
from universities, government health agencies, and
68 VX4650
Driving
Persons with pacemakers:
G
Should ALWAYS keep the phone more than six (6)
inches from their pacemaker when the phone is turned
ON;
Check the laws and regulations on the use of wireless
phones in the areas where you drive and always obey
them. Also, if using your phone while driving, please
observe the following:
G
Should not carry the phone in a breast pocket;
G
G
Should use the ear opposite the pacemaker to
minimize the potential for interference;
Give full attention to driving -- driving safely is your first
responsibility;
G
G
G
Should turn the phone OFF immediately if there is any
reason to suspect that interference is taking place.
Use hands-free operation, if available;
Pull off the road and park before making or answering
a call if driving conditions or the law so require.
Hearing Aids
Electronic Devices
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
want to consult your service provider (or call the customer
service line to discuss alternatives.) Optional for each
phone manufacturer.
Most modern electronic equipment is shielded from RF
signals. However, certain electronic equipment may not be
shielded against the RF signals from your
wireless phone.
Pacemakers
The Health Industry Manufacturers Association
recommends that a minimum separation of six (6) inches
be maintained between a handheld wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent with
the independent research by and recommendations of
Wireless Technology Research.
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be
able to assist you in obtaining this information.
VX4650 69
Safety
Health Care Facilities
Potentially Explosive Atmosphere
Turn your phone OFF in health care facilities when any
regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may use equipment that
could be sensitive to external RF energy.
Turn your phone OFF when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Areas with a potentially explosive atmosphere are often,
but not always marked clearly. Potential areas may
include: fueling areas (such as gasoline stations); below
deck on boats; fuel or chemical transfer or storage
facilities; vehicles using liquefied petroleum gas (such as
propane or butane); areas where the air contains
chemicals or particles (such as grain, dust, or metal
powders); and any other area where you would normally
be advised to turn off your vehicle engine.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its representative regarding your
vehicle. You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Turn your phone OFF in any facility where posted notices
so require.
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place objects,
including either installed or portable wireless equipment,
in the area over the air bag or in the air bag deployment
area. If in-vehicle wireless equipment is improperly
installed and the air bag inflates, serious injury could
result.
Aircraft
FCC regulations prohibit using your phone while in the air.
Switch OFF your phone before boarding an aircraft.
Blasting Areas
To avoid interfering with blasting operations, turn your
phone OFF when in a “blasting area” or in areas posted:
“Turn off two-way radio”. Obey all signs and instructions.
70 VX4650
G
G
G
G
Recharge the battery after long periods of non-use to
maximize battery life.
Safety Information
Please read and observe the following information for safe
and proper use of your phone and to prevent damage.
Also, keep the user guide in an accessible place at all the
times after reading it.
Battery life will vary due to usage patterns and
environmental conditions.
Use of extended backlighting, MiniBrowser, and data
connectivity kits affect battery life and talk/standby times.
Violation of the instructions may cause
minor or serious damage to the product.
The self-protection function of the battery cuts the
power of the phone when its operation is in an abnormal
state. In this case, remove the battery from the phone,
reinstall it, and turn the phone on.
Charger and Adapter Safety
G
The charger and adapter are intended for indoor use only.
Explosion, Shock, and Fire Hazards
Battery Information and Care
G
Do not put your phone in a place subject to excessive
dust and keep the minimum required distance between
the power cord and heat sources.
G
Please dispose of your battery properly or take it to your
local wireless carrier for recycling.
The battery does not need to be fully discharged before
recharging.
Use only LG-approved chargers specific to your phone
model since they are designed to maximize battery life.
G
Unplug the power cord prior to cleaning your phone,
and clean the power plug pin when it is dirty.
G
G
When using the power plug, ensure that it is firmly
connected. If it is not, it may cause excessive heat or fire.
G
G
If you put your phone in a pocket or bag without
G
Do not disassemble or short-circuit the battery.
covering the receptacle of the phone (power plug pin),
metallic articles (such as a coin, paperclip or pen) may
short-circuit the phone. Always cover the receptacle
when not in use.
G
Keep the battery’s metal contacts clean.
Replace the battery when it no longer provides
acceptable performance. The battery can be recharged
several hundred times before replacement.
G
VX4650 71
Safety
G
G
Do not short-circuit the battery. Metallic articles such
as a coin, paperclip or pen in your pocket or bag may
short-circuit the + and – terminals of the battery (metal
strips on the battery) upon moving. Short-circuit of the
terminal may damage the battery and cause an
explosion.
Do not immerse your phone in water. If this happens,
turn it off immediately and remove the battery. If the
phone does not work, take it to an LG Authorized
Service Center.
G
The power cord on this product will expose you to lead,
a chemical known to the State of California to cause
(cancer) birth defects or other reproductive harm.
Wash hands after handling.
General Notice
G
G
Do not paint your phone.
G
Using a damaged battery or placing a battery in your
mouth may cause serious injury.
The data saved in your phone might be deleted due to
careless use, repair of the phone, or upgrade of the
software. Please backup your important phone
numbers. (Ring tones, text messages, voice messages,
pictures, and videos could also be deleted.)
The manufacturer is not liable for damage due to the
loss of data.
G
Do not place items containing magnetic components
such as a credit card, phone card, bank book or subway
ticket near your phone. The magnetism of the phone
may damage the data stored in the magnetic strip.
G
Talking on your phone for a long period of time may
reduce call quality due to heat generated during use.
G
G
When you use the phone in public places, set the ring
tone to vibration so as not to disturb others.
G
When the phone is not used for a long period time, store
it in a safe place with the power cord unplugged.
Do not turn your phone on or off when putting it in your
ear.
G
Using the phone in proximity to receiving equipment
(i.e., TV or radio) may cause interference to the phone.
G
Do not use the phone if the antenna is damaged. If a
damaged antenna contacts skin, it may cause a slight
burn. Please contact an LG Authorized Service Center
to replace the damaged antenna.
72 VX4650
2. What is the FDA's role concerning the safety of
wireless phones?
FDA Consumer Update
The U.S. Food and Drug Administration’s
Center for Devices and Radiological Health
Consumer Update on Mobile Phones:
Under the law, the FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new drugs
or medical devices. However, the agency has authority to
take action if wireless phones are shown to emit Radio
Frequency (RF) energy at a level that is hazardous to the
user. In such a case, the FDA could require the
manufacturers of wireless phones to notify users of the
health hazard and to repair, replace, or recall the phones
so that the hazard no longer exists.
1. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any
health problems are associated with using wireless
phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of
Radio Frequency (RF) energy in the microwave range
while being used. They also emit very low levels of RF
when in the standby mode. Whereas high levels of RF can
produce health effects (by heating tissue), exposure to low
level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level
RF exposures have not found any biological effects. Some
studies have suggested that some biological effects may
occur, but such findings have not been confirmed by
additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
Although the existing scientific data do not justify FDA
regulatory actions, the FDA has urged the wireless phone
industry to take a number of steps, including the following:
G
Support needed research into possible biological
effects of RF of the type emitted by wireless phones;
G
Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device
function; and
G
Cooperate in providing users of wireless phones with
the best possible information on possible effects of
wireless phone use on human health.
VX4650 73
Safety
The FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
those they can get from wireless phones. Base stations
are thus not the subject of the safety questions discussed
in this document.
3. What kinds of phones are the subject of this update?
The term “wireless phone” refers here to handheld
wireless phones with built-in antennas, often called “cell”,
“mobile”, or “PCS” phones. These types of wireless
phones can expose the user to measurable Radio
Frequency (RF) energy because of the short distance
between the phone and the user’s head.
G
National Institute for Occupational Safety and Health
G
Environmental Protection Agency
G
Occupational Safety and Health Administration
G
National Telecommunications and Information
Administration
These RF exposures are limited by FCC safety guidelines
that were developed with the advice of the FDA and other
federal health and safety agencies. When the phone is
located at greater distances from the user, the exposure to
RF is drastically lower because a person's RF exposure
decreases rapidly with increasing distance from the
source. The so-called “cordless phones,” which have a
base unit connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus
produce RF exposures far below the FCC safety limits.
The National Institutes of Health participates in some
interagency working group activities, as well.
The FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States must
comply with FCC safety guidelines that limit RF exposure.
The FCC relies on the FDA and other health agencies for
safety questions about wireless phones.
The FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than
74 VX4650
4. What are the results of the research done already?
studies demonstrated the existence of any harmful health
effects from wireless phone RF exposures. However, none
of the studies can answer questions about long-term
exposures, since the average period of phone use in these
studies was around three years.
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in their
research methods. Animal experiments investigating the
effects of Radio Frequency (RF) energy exposures
characteristic of wireless phones have yielded conflicting
results that often cannot be repeated in other laboratories.
A few animal studies, however, have suggested that low
levels of RF could accelerate the development of cancer in
laboratory animals. However, many of the studies that
showed increased tumor development used animals that
had been genetically engineered or treated with cancer-
causing chemicals so as to be pre-disposed to develop
cancer in the absence of RF exposure. Other studies
exposed the animals to RF for up to 22 hours per day. These
conditions are not similar to the conditions under which
people use wireless phones, so we don’t know with
certainty what the results of such studies mean for human
health. Three large epidemiology studies have been
published since December 2000. Between them, the
studies investigated any possible association between the
use of wireless phones and primary brain cancer, glioma,
meningioma, or acoustic neuroma, tumors of the brain or
salivary gland, leukemia, or other cancers. None of the
5. What research is needed to decide whether RF
exposure from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological
studies of people actually using wireless phones would
provide some of the data that are needed. Lifetime animal
exposure studies could be completed in a few years.
However, very large numbers of animals would be needed
to provide reliable proof of a cancer promoting effect if one
exists. Epidemiological studies can provide data that is
directly applicable to human populations, but 10 or more
years follow-up may be needed to provide answers about
some health effects, such as cancer. This is because the
interval between the time of exposure to a cancer-causing
agent and the time tumors develop — if they do — may be
many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at
which the phone is held, or which model of phone is used.
VX4650 75
Safety
6. What is the FDA doing to find out more about the
possible health effects of wireless phone RF?
users. The CRADA will also include a broad assessment of
additional research needs in the context of the latest
research developments around the world.
The FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to Radio Frequency (RF) energy.
The FDA has been a leading participant in the World
Health Organization International Electro Magnetic Fields
(EMF) Project since its inception in 1996. An influential
result of this work has been the development of a detailed
agenda of research needs that has driven the
establishment of new research programs around the
world. The project has also helped develop a series of
public information documents on EMF issues.
The FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research
and Development Agreement (CRADA) to do research on
wireless phone safety. The FDA provides the scientific
oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded
research is conducted through contracts with
independent investigators. The initial research will include
both laboratory studies and studies of wireless phone
7. How can I find out how much Radio Frequency energy
exposure I can get by using my wireless phone?
All phones sold in the United States must comply with
Federal Communications Commission (FCC) guidelines that
limit Radio Frequency (RF) energy exposures. The FCC
established these guidelines in consultation with the FDA
and the other federal health and safety agencies. The FCC
limit for RF exposure from wireless telephones is set at a
Specific Absorption Rate (SAR) of 1.6 watts per kilogram
(1.6 W/kg). The FCC limit is consistent with the safety
standards developed by the Institute of Electrical and
Electronic Engineering (IEEE) and the National Council on
Radiation Protection and Measurement. The exposure
limit takes into consideration the body’s ability to remove
heat from the tissues that absorb energy from the wireless
phone and is set well below levels known to have effects.
Manufacturers of wireless phones must report the RF
exposure level for each model of phone to the FCC. The
FCC website (http://www.fcc.gov/oet/ rfsafety) gives
directions for locating the FCC identification number on
your phone so you can find your phone’s RF exposure level
in the online listing.
76 VX4650
8. What has the FDA done to measure the Radio
Frequency energy coming from wireless phones?
9. What steps can I take to reduce my exposure to Radio
Frequency energy from my wireless phone?
The Institute of Electrical and Electronic Engineers (IEEE)
is developing a technical standard for measuring the Radio
Frequency (RF) energy exposure from wireless phones
and other wireless handsets with the participation and
leadership of FDA scientists and engineers. The standard,
“Recommended Practice for Determining the Spatial-Peak
Specific Absorption Rate (SAR) in the Human Body Due to
Wireless Communications Devices: Experimental
Techniques,” sets forth the first consistent test
methodology for measuring the rate at which RF is
deposited in the heads of wireless phone users. The test
method uses a tissue-simulating model of the human head.
Standardized SAR test methodology is expected to greatly
improve the consistency of measurements made at
different laboratories on the same phone. SAR is the
measurement of the amount of energy absorbed in tissue,
either by the whole body or a small part of the body. It is
measured in watts/kg (or milliwatts/g) of matter. This
measurement is used to determine whether a wireless
phone complies with safety guidelines.
If there is a risk from these products — and at this point we
do not know that there is — it is probably very small. But if
you are concerned about avoiding even potential risks, you
can take a few simple steps to minimize your exposure to
Radio Frequency (RF) energy. Since time is a key factor in
how much exposure a person receives, reducing the
amount of time spent using a wireless phone will reduce
RF exposure. If you must conduct extended conversations
by wireless phone every day, you could place more
distance between your body and the source of the RF,
since the exposure level drops off dramatically with
distance. For example, you could use a headset and carry
the wireless phone away from your body or use a wireless
phone connected to a remote antenna. Again, the
scientific data do not demonstrate that wireless phones
are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like
those described above to reduce your RF exposure from
wireless phone use.
VX4650 77
Safety
10. What about children using wireless phones?
11. What about wireless phone interference with
medical equipment?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you
want to take steps to lower exposure to Radio Frequency
(RF) energy, the measures described above would apply to
children and teenagers using wireless phones. Reducing
the time of wireless phone use and increasing the distance
between the user and the RF source will reduce RF
exposure.
Some groups sponsored by other national governments
have advised that children be discouraged from using
wireless phones at all. For example, the government in the
United Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly precautionary;
it was not based on scientific evidence that any health
hazard exists.
Radio Frequency (RF) energy from wireless phones can
interact with some electronic devices. For this reason, the
FDA helped develop a detailed test method to measure
Electro Magnetic Interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones.
This test method is now part of a standard sponsored by
the Association for the Advancement of Medical
Instrumentation (AAMI). The final draft, a joint effort by the
FDA, medical device manufacturers, and many other
groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers
and defibrillators are safe from wireless phone EMI.
The FDA has tested hearing aids for interference from
handheld wireless phones and helped develop a voluntary
standard sponsored by the Institute of Electrical and
Electronic Engineers (IEEE). This standard specifies test
methods and performance requirements for hearing aids
and wireless phones so that no interference occurs when
a person uses a “compatible” phone and a “compatible”
hearing aid at the same time. This standard was approved
by the IEEE in 2000.
The FDA continues to monitor the use of wireless phones
78 VX4650
for possible interactions with other medical devices.
Should harmful interference be found to occur, the FDA
will conduct testing to assess the interference and work to
resolve the problem.
10 Driver Safety Tips
Your wireless phone gives you the powerful ability to
communicate by voice almost anywhere, anytime. An
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When operating a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
12. Where can I find additional information?
For additional information, please refer to the following
resources:
FDA web page on wireless phones
(http://www.fda.gov/cdrh/phones/index.html)
1. Get to know your wireless phone and its features such
as speed dial and redial. Carefully read your instruction
manual and learn to take advantage of valuable
features most phones offer, including automatic redial
and memory. Also, work to memorize the phone keypad
so you can use the speed dial function without taking
your attention off the road.
Federal Communications Commission (FCC) RF Safety
Program
(http://www.fcc.gov/oet/rfsafety)
International Commission on Non-lonizing Radiation
Protection
(http://www.icnirp.de)
2. When available, use a hands-free device. A number of
hands-free wireless phone accessories are readily
available today. Whether you choose an installed
mounted device for your wireless phone or a speaker
phone accessory, take advantage of these devices if
available to you.
World Health Organization (WHO) International EMF
Project
(http://www.who.int/emf)
National Radiological Protection Board (UK)
(http://www.nrpb.org.uk/)
VX4650 79
Safety
3. Position your wireless phone within easy reach. Make
sure you place your wireless phone within easy reach
and where you can reach it without removing your eyes
from the road. If you get an incoming call at an
inconvenient time, if possible, let your voicemail answer
it for you.
or attempt to coincide your calls with times you may be
stopped at a stop sign, red light or otherwise stationary.
But if you need to dial while driving, follow this simple tip
-- dial only a few numbers, check the road and your
mirrors, then continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Stressful or emotional
conversations and driving do not mix; they are
distracting and even dangerous when you are behind
the wheel of a car. Make people you are talking with
aware you are driving and if necessary, suspend
conversations which have the potential to divert your
attention from the road.
4. Suspend conversations during hazardous driving
conditions or situations. Let the person you are
speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather
conditions. Rain, sleet, snow and ice can be hazardous,
but so is heavy traffic. As
a
driver, your first
responsibility is to pay attention to the road.
5. Do not take notes or look up phone numbers while
driving. If you are reading an address book or business
card, or writing a “to-do” list while driving a car, you are
not watching where you are going. It is common sense.
Don’t get caught in a dangerous situation because you
are reading or writing and not paying attention to the
road or nearby vehicles.
8. Use your wireless phone to call for help. Your wireless
phone is one of the greatest tools you can own to
protect yourself and your family in dangerous situations
-- with your phone at your side, help is only three
numbers away. Dial 911 or other local emergency
number in the case of fire, traffic accident, road hazard
or medical emergency. Remember, it is a free call on
your wireless phone!
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan your calls before you begin your trip
80 VX4650
9. Use your wireless phone to help others in emergencies.
Your wireless phone provides you a perfect opportunity
to be a “Good Samaritan” in your community. If you see
an auto accident, crime in progress or other serious
emergency where lives are in danger, call 911 or other
local emergency number, as you would want others to
do for you.
Consumer Information on SAR
(Specific Absorption Rate)
This Model Phone Meets the Government’s Requirements
for Exposure to Radio Waves. Your wireless phone is a
radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government.
These limits are part of comprehensive guidelines and
establish permitted levels of RF energy for the general
population. The guidelines are based on standards that
were developed by independent scientific organizations
through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety margin
designed to assure the safety of all persons, regardless of
age and health.
10. Call roadside assistance or a special wireless non-
emergency assistance number when necessary.
Certain situations you encounter while driving may
require attention, but are not urgent enough to merit a
call for emergency services. But you can still use your
wireless phone to lend a hand. If you see a broken-
down vehicle posing no serious hazard, a broken traffic
signal, a minor traffic accident where no one appears
injured or a vehicle you know to be stolen, call roadside
assistance or other special non-emergency wireless
number.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6
W/kg. Tests for SAR are conducted using standard
operating positions specified by the FCC with the phone
transmitting at its highest certified power level in all tested
frequency bands. Although SAR is determined at the
For more information, please call to 888-901-SAFE, or visit
our website www.wow-com.com.
VX4650 81
Safety
highest certified power level, the actual SAR level of the
phone while operating can be well below the maximum
value. Because the phone is designed to operate at
multiple power levels to use only the power required to
reach the network, in general, the closer you are to a
wireless base station antenna, the lower the power output.
information on this model phone is on file with the FCC and
can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID
BEJVX4700. Additional information on Specific
Absorption Rates (SAR) can be found on the Cellular
Telecommunications Industry Association (CTIA)
website at http://www.wow-com.com.
Before a phone model is available for sale to the public, it
must be tested and certified to the FCC that it does not
exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed in
positions and locations (e.g., at the ear and worn on the
body) as required by the FCC for each model.
* In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg)
averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give
additional protection for the public and to account for
any variations in measurements.
The highest SAR value for this model phone when tested
for use at the ear is 1.21 W/kg and when worn on the body,
as described in this user guide, is 1.28 W/kg (body-worn
measurements differ among phone models, depending
upon available accessories and FCC requirements). While
there may be differences between SAR levels of various
phones and at various positions, they all meet the
government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF emission guidelines. SAR
82 VX4650
Accessories
There are a variety of accessories available for your
mobile phone. Consult your local dealer for availability.
Headset
The headset connects to your phone
allowing hands-free operation.
It includes earpiece, microphone.
Battery Charger
The battery charger allows you to
power your phone.
Input Voltage: 100-240VAC 50-60Hz
Output Voltage: 5.0V, 1000mA
NOTE It operates in vibration/no sound mode on Manner
Mode/Silence All Mode even when connected to a
headset.
Battery
Two batteries are available. The
standard battery, and the extended
battery.
USB Cable
Connects your phone to your PC.
Vehicle Power Charger
The vehicle power charger allows
you to operate the phone and trickle
charge the phone’s battery from your
vehicle. It takes 5 hours to charge a
completely discharged battery.
Battery Pack Charger
The battery pack charger allows you
to charge the battery pack itself
without the phone. It can charge a
completely discharged standard
battery in 3.5 hours.
Hands-Free Car Kit (Portable)
The hands-free car kit enables you to
attach the phone to the power jack in
your car, providing you with hands-free
operation. It can charge a completely
discharged battery in 5 hours.
Holster
VX4650 83
Warranty Information
(6) The customer shall bear the cost of shipping the product to
the Customer Service Department of LG. LG shall bear the
cost of shipping the product back to the consumer after the
completion of service under this limited warranty.
1. WHAT THIS WARRANTY COVERS:
LG offers you a limited warranty that the enclosed
subscriber unit and its enclosed accessories will be free
from defects in material and workmanship, according to
the following terms and conditions:
2. WHAT THIS WARRANTY DOES NOT COVER:
(1) The limited warranty for the unit and enclosed accessories
shall be a period of one (1) year from the date of original
purchase. The remaining warranty period for the unit being
repaired or replaced shall be determined by presentation of
the original sales receipt for the purchase of the unit.
(1) Defects or damage resulting from use of the product in
other than its normal and customary manner.
(2) Defect or damage from abnormal use, abnormal conditions,
improper storage, exposure to moisture or dampness,
unauthorized modifications, unauthorized connections,
unauthorized repair, misuse, neglect, abuse, accident,
alteration, improper installation, or other acts which are not
the fault of LG, including damage caused by shipping, blown
fuses, or spills of food or liquid.
(2) The limited warranty extends only to the original purchaser
of the product and is not assignable or transferable to any
subsequent purchaser / end user.
(3) The limited warranty is good only to the original purchaser
of the product during the warranty period as long as it is in
the U.S., including Alaska, Hawaii, U.S. Territories, and all
Canadian Provinces.
(3) Breakage or damage to antennas unless caused directly by
defects in material or workmanship.
(4) Alleged defects or malfunctions of the product if the
Customer Service Department at LG was not notified by the
consumer during the applicable limited warranty period.
(4) The external housing and cosmetic parts shall be free of
major defects at the time of shipment and, therefore, shall
not be covered under these limited warranty terms.
(5) Products which have had the serial number removed or
made illegible.
(5) Upon request from LG, the consumer must provide
information satisfactory to LG to prove the date of purchase
or exchange.
84 VX4650
(6) This limited warranty is in lieu of all other warranties,
express or implied either in fact or by operations of law,
statutory or otherwise, including but not limited to any
implied warranty of marketability merchantability or fitness
for a particular use.
OUT OF THE USE OF, OR INABILITY TO USE, THIS PRODUCT
OR FOR ANY BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY, INCLUDING THE IMPLIED WARRANTY OF
MARKETABILITY OR MERCHANTABILITY APPLICABLE TO
THIS PRODUCT.
Some states do not allow the exclusive of limitation of
incidental or consequential damages or limitations on how
long an implied warranty lasts; so these limitations or
exclusions may not apply to you. This warranty gives you
specific legal rights and you may also have other rights,
which vary from state to state.
(7) Damage resulting from use of non-LG approved
accessories.
(8) All plastic surfaces and all other externally exposed parts
that are scratched or damaged due to normal customer
use.
(9) Products operated outside published maximum ratings.
(10) Products used or obtained in a rental program.
(11) Consumables (such as fuses).
4. HOW TO GET WARRANTY SERVICE:
To obtain warranty service, please call the following
telephone number from anywhere in the continental
United States:
3. STATE LAW RIGHTS:
LG Electronics Service
201 James Record Road
Huntsville, AL 35824
No other express warranty is applicable to this product.
THE DURATION OF ANY IMPLIED WARRANTIES,
INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY
OR MERCHANTABILITY, IS LIMITED TO THE DURATION OF
THE EXPRESS WARRANTY HEREIN. LG INFOCOMM
U.S.A., INC. SHALL NOT BE LIABLE FOR THE LOSS OF THE
USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY
OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, ARISING
Tel. 1-800-793-8896
Email: http://us.lgservice.com
Please call or write for the location of the LGE authorized
service center nearest you and the procedures for
obtaining warranty claims.
VX4650 85
Index
10 Driver Safety Tips 79
123 (Numbers) Mode 19
2-sec Pause 29
Call Connect 58
Call Setup 64
Call Timer 36
Callback # 43
Erase Contacts 64
ERI Sounds 58
Ez Tip Calc 56
K
KB Counter 36
Key Light Timer 60
Key Tone 57
Change Lock 64
Charging the Battery 13
Check Accessories 7
Clocks 60
Consumer Information on
SAR 81
Contacts 32
Contacts Entries 22
Contents 4
A
F
Abc (Multi-tap) Mode 19
Accessories 83
Alarm Clock 54
Announce Alerts 46
Answer Call 65
Auto Answer 65
Auto Erase 43
Auto NAM 62
Auto Play 44
Auto Retry 64
Auto Save 43
Auto View 44
Auto Volume 66
FCC Part 15 Class B
Compliance 7-12
FCC RF Exposure
Information 9-12
FDA Consumer Update 73
Fonts 61
L
Language 61
LCD 59
List Contacts 33
Location 67
Lock Phone 63
G
M
Contrast 60
Get Information 49
Get It Now 47, 48
Groups 34
Manner Mode 16
Media 52
D
Menu Access 32
Menu Style 60
Menus Overview 11
Message Alerts 58
Message Icon Reference
40
Data Settings 66
Data/Fax 66
Default Numbers 26
Deleting 27
Dialed Calls 35
Display 59
H
Hard Pause 29
Help 47
B
Back To Top 58
Backlight 59
Banner 59
Battery 13
Battery Charge Level 13
Best Match 46
Messages 37
I
DTMF Length 59
Minute Beep 58
Missed Calls 36
Mobile Web 49
Msg Objects 53
Msg Settings 43
My Phone Number 67
My Shortcut 55
Icon Glossary 67
Images 52
Important Information 7
Important Safety
Precautions 1
Inbox 41
E
Emergency #s 63
Entry Mode 44
Erase All 44
Erase Calls 36
C
Calculator 56
Installing the Battery 13
86 VX4650
My VCard 34
Reset Default 64
Restrict Calls 63
Ringers 57
T
T9Word (T9) Mode 19
Technical Details 7-12
Text Input 19
Theme Colors 60
TIA Safety Information 68
Tools 53
N
New E-mail 33
New Message 38
New Number 33
Notepad 55
S
S/W Version 67
Safety 68
Train Words 47
TTY Mode 66
Safety Information 71
Saved 43
Schedule 54
Screen Icons 15
Screens 60
O
One-Touch Dial 65
Outbox 42
V
Voice 45
Searching 30
Security 63
Voice Commands 45
Voice Mail 38
Voice Mail # 44
Voice Memo 55
Voice Privacy 65
Volume 58
P
Pauses 29
Select System 62
Service Alerts 58
Service Change 58
Serving System 62
Set NAM 62
PC Connection 67
Phone Info 67
Phone Overview 10
Power On/Off Tone 59
Power Saver 61
Prepending 31
Settings 57
W
Shortcut Help 67
Signal Strength 14
Signature 44
Sound Modes 46
Sounds 52, 57
Speed Dials 34
Start Browser 50
Status Light 61
Symbols Mode 19
System 62
Web Alerts 51
Web Messages 51
World Clock 56
Q
Quick-Text 44
R
Received Calls 36
Receiving Calls 16
Recent Calls 35
Redialing Calls 16
VX4650 87
Precaución de Seguridad Importante
Lea estas sencillas instrucciones. Romper las reglas puede ser peligroso o ilegal. Se ofrece más
información detallada en esta guía del usuario.
No seguir las instrucciones puede ocasionar lesiones graves o la muerte.
G
No use nunca una batería no aprobada, ya que esto podría dañar el teléfono o la batería, y
podría ocasionar que estalle la batería.
G
Nunca coloque el teléfono en un horno de microondas ya que esto haría que estallara la
batería.
G
No se deshaga de la batería mediante el fuego o con materiales peligrosos o inflamables.
G
Asegúrese de que no entren en contacto con la batería objetos con bordes cortante, como
dientes de animales o uñas. Hay riesgo de causar un incendio.
G
Almacene la batería en un sitio alejado del alcance de los niños.
G
Cuide que los niños no se traguen partes del teléfono, como los tapones de hule (del
auricular, partes conectoras del teléfono, etc.). Esto podría causar asfixia o ahogo.
VX4650 1
Precaución de Seguridad Importante
G
G
Desconecte el enchufe de la toma de corriente y el cargador cuando se ilumina porque
puede provocar unchoque electrico o peligro de incendio.
Al ir en automóvil, no deje el teléfono ni instale el kit de manos libres cerca de la bolsa de
aire. Si el equipo inalámbrico está instalado incorrectamente y se activa la bolsa de aire,
usted puede resultar gravemente lesionado.
G
G
G
No use un teléfono de mano cuando esté conduciendo.
No use el teléfono en zonas donde esté prohibido hacerlo. (Por ejemplo, en los aviones).
No exponga cargador de baterías o el adaptador a la luz directa del sol, ni lo utilice en
sitios con elevada humedad, como por ejemplo el baño.
G
G
Nunca almacene el teléfono a temperaturas menores de -4° F ni mayores de 122° F.
No use sustancias químicas corrosivas (como alcohol, bencina, solventes, etc.) ni
detergentes para limpiar el teléfono. Existe riesgo de causar un incendio.
G
No deje caer el teléfono, ni lo golpee o agite fuertemente. Tales acciones pueden dañar las
tarjetas de circuitos internas del teléfono.
G
G
No use el teléfono en áreas altamente explosivas, ya que puede generar chispas.
No dañe el cable de corriente doblándolo, retorciéndolo, tirando de él o calentándolo. No
use la clavija si está suelta, ya que esto puede ocasionar incendios o descargas eléctricas.
2 VX4650
G
G
No coloque objetos pesados sobre el cable de corriente. No permita que el cable de
corriente se doble, ya que esto puede ocasionar incendios o descargas eléctricas.
No manipule el teléfono con las manos húmedas cuando se esté cargando. Puede causar
un choque eléctrico o dañar gravemente el teléfono.
G
G
No desarme el teléfono.
No haga ni conteste llamadas mientras esté cargando el teléfono, ya que puede causar un
corto circuito en éste o provocar descargas eléctricas o incendios.
G
G
Sólo use baterías, antenas y cargadores proporcionados por LG. La garantía no se aplicará
a productos proporcionados por otros proveedores.
Sólo personal autorizado debe darle servicio al teléfono y a sus accesorios. La instalación
o servicio incorrectos pueden dar como resultado accidentes y por tanto invalidar la
garantía.
G
G
No sostenga la antena ni permita que entre en contacto con su cuerpo durante las
llamadas.
Las llamadas de emergencia sólo pueden hacerse dentro de un área de servicio. Para hacer una
llamada de emergencia, asegúrese de estar dentro de un área de servicio y que el teléfono esté
encendido.
VX4650 3
Ajuste rápido del volumen . . . . . . . .17
Ajustando El Altavoz Encendido . . .18
Llamada en espera . . . . . . . . . . . . . . .18
ID del llamador . . . . . . . . . . . . . . . . . .18
Marcado rápido . . . . . . . . . . . . . . . . .18
Marcado con comandos de voz . . .19
Precaución de Seguridad
Contactos . . . . . . . . . . . . . . . . . . . . .33
Acceso y opciones . . . . . . . . . . . . . .33
1. Lista de Contactos . . . . . . . . . . . . .34
2. Nuevo Número . . . . . . . . . . . . . . . .34
3. Nuevo E-mail . . . . . . . . . . . . . . . . . .34
4. Grupos . . . . . . . . . . . . . . . . . . . . . . . .35
5. Marcaciones Rápidas . . . . . . . . .35
6. Mi tarjeta V . . . . . . . . . . . . . . . . . . .35
Importante . . . . . . . . . . . . . . . . . . . . . .1
Bienvenidos . . . . . . . . . . . . . . . . . . . . . .7
Información importante . . . . . . . . . . . .7
Información sobre la exposición a
radiofrecuencias de la FCC . . . . . . . . .9
Introducir y editar información . . . .20
Introducción de texto . . . . . . . . . . . .20
Ejemplos de introducción de texto 21
Descripción general del eléfono . .10
Descripción general de los menús 11
Lista Llam . . . . . . . . . . . . . . . . . . . . .36
Acceso y opciones . . . . . . . . . . . . . .36
1. Llam. saliente . . . . . . . . . . . . . . . . . .36
2. Llam. entrante . . . . . . . . . . . . . . . . .37
3. Llam. fracasada . . . . . . . . . . . . . . .37
4. Borrado Llam. . . . . . . . . . . . . . . . . .37
5. Tiempo de uso . . . . . . . . . . . . . . . . .37
6. Contador de KB . . . . . . . . . . . . . . . .37
Para hacer funcionar su teléfono
por primera vez . . . . . . . . . . . . . . . . . .13
Contactos en la memoria del
teléfono . . . . . . . . . . . . . . . . . . . . . . . . .23
Aspectos básicos del
almacenamiento de entradas de
contactos . . . . . . . . . . . . . . . . . . . . . . .23
Opciones para personalizar sus
contactos . . . . . . . . . . . . . . . . . . . . . . .24
Modificar entradas de contactos .26
Borrar . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Números de teléfono con pausas .30
La batería . . . . . . . . . . . . . . . . . . . . . .13
Nivel de carga de la batería . . . . . . .13
Encender y apagar el teléfono . . . . .14
Apagar el teléfono . . . . . . . . . . . . . . .14
Fuerza de la señal . . . . . . . . . . . . . . .14
Iconos en pantalla . . . . . . . . . . . . . . .15
Hacer llamadas . . . . . . . . . . . . . . . . .16
Remarcado de llamadas . . . . . . . . . .16
Recibir llamadas . . . . . . . . . . . . . . . .16
Mensajes . . . . . . . . . . . . . . . . . . . . . .38
Acceso y opciones . . . . . . . . . . . . . .38
1. Correo de voz . . . . . . . . . . . . . . . . .39
2. Nuevos Mensaje . . . . . . . . . . . . . .39
Referencia de los iconos de mensaje 41
3. Entrada . . . . . . . . . . . . . . . . . . . . . . .42
4. Salida . . . . . . . . . . . . . . . . . . . . . . . . .43
5. Guardado . . . . . . . . . . . . . . . . . . . . .44
6. Configuraciones de mensaje . . .44
Búsqueda en la memoria del
teléfono . . . . . . . . . . . . . . . . . . . . . . . . .31
Hacer llamadas desde la memoria
del teléfono . . . . . . . . . . . . . . . . . . . . . .32
Acceso rápido a funciones
prácticas . . . . . . . . . . . . . . . . . . . . . . . .17
Modo de manerae . . . . . . . . . . . . . . .17
Modo de bloqueo . . . . . . . . . . . . . . . .17
Función de Mudo . . . . . . . . . . . . . . . .17
Uso de los menús del teléfono . . . .33
Acceso al menú . . . . . . . . . . . . . . . . .33
4 VX4650
Descripciones de submenús de
Acceso y Opciones . . . . . . . . . . . . . .50
1. Iniciar Browser . . . . . . . . . . . . . . . .51
2. Mensajes de Web . . . . . . . . . . . . .52
3. Alertas Web . . . . . . . . . . . . . . . . . . .52
1.4 Alerta de mensaje . . . . . . . . . . . .59
1.5 Servicio Alertas . . . . . . . . . . . . . .59
1.5.1 Cambiar de servicio . . . . . . . .60
1.5.2 ERI Sonidos . . . . . . . . . . . . . .60
1.5.3 Señal sonora de un minuto . .60
1.5.4 Llamadas conexión . . . . . . . .60
1.5.5 Volver al principio . . . . . . . . . .60
configuración de mensajes . . . . . . . .44
6.1 Auto guardar . . . . . . . . . . . . . . . .44
6.2 Auto borrar . . . . . . . . . . . . . . . . .45
6.3 Llame al # . . . . . . . . . . . . . . . . . .45
6.4 Firma . . . . . . . . . . . . . . . . . . . . . .45
6.5 Correo de voz # . . . . . . . . . . . . . .45
6.6 Vista automatica . . . . . . . . . . . . .45
6.7 Modalidad de asentar . . . . . . . . .45
6.8 Texto rápido . . . . . . . . . . . . . . . . .45
6.9 Reporduccion automatica . . . . . .45
7. Borrar todo . . . . . . . . . . . . . . . . . . .45
Media . . . . . . . . . . . . . . . . . . . . . . . . .53
Acceso y opciones . . . . . . . . . . . . . .53
1. Imágenes . . . . . . . . . . . . . . . . . . . . .53
2. Sonido . . . . . . . . . . . . . . . . . . . . . . . .53
3. Objetos de mensaje de texto . . . .54
1.6 Tono de activación/
desactivación . . . . . . . . . . . . . . . . . .60
1.7 Tono de DTMF . . . . . . . . . . . . . .60
2. Mostrar . . . . . . . . . . . . . . . . . . . . . . .61
2.1 Pendon . . . . . . . . . . . . . . . . . . . .61
2.2 Iluminación de fondo . . . . . . . . .61
2.2.1 LCD . . . . . . . . . . . . . . . . . . . . .61
2.2.2 Temporizador de luz de tecla .61
2.3 Pantallas . . . . . . . . . . . . . . . . . . . .61
2.4 Estilo del menú . . . . . . . . . . . . . .61
2.5 Relojes . . . . . . . . . . . . . . . . . . . . .62
2.6 Colores de tema . . . . . . . . . . . . .62
2.7 Contraste . . . . . . . . . . . . . . . . . . .62
2.8 Fuente . . . . . . . . . . . . . . . . . . . . .62
2.8.1 Dígitos de llamada . . . . . . . . .62
2.8.2 Editor de texto . . . . . . . . . . . .62
2.9 Idioma . . . . . . . . . . . . . . . . . . . . .63
2.0 Poder-Salvo . . . . . . . . . . . . . . . . .63
Aparato . . . . . . . . . . . . . . . . . . . . . . . .54
Acceso y opciones . . . . . . . . . . . . . .54
1. Plan . . . . . . . . . . . . . . . . . . . . . . . . . .55
2. Alarma de reloj . . . . . . . . . . . . . . . .55
3. Memo Vocal . . . . . . . . . . . . . . . . . . .56
4. Atajo . . . . . . . . . . . . . . . . . . . . . . . . .56
5. Nota . . . . . . . . . . . . . . . . . . . . . . . . . .56
6. Ez Sugerencia . . . . . . . . . . . . . . . . .57
7. Calculadora . . . . . . . . . . . . . . . . . . .57
8. Reloj universal . . . . . . . . . . . . . . . . .58
Voz . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Acceso y opciones . . . . . . . . . . . . . .46
1. Comando de voz . . . . . . . . . . . . . . .46
2. Modos de sonido . . . . . . . . . . . . . .47
3. Anunciar alertas . . . . . . . . . . . . . . .47
4. Mejor coincidencia . . . . . . . . . . . .47
5. Comando de entrenamiento . . . .48
6. Ayuda . . . . . . . . . . . . . . . . . . . . . . . . .48
Ambiente . . . . . . . . . . . . . . . . . . . . . .58
Acceso y opciones . . . . . . . . . . . . . .58
1. Sonidos . . . . . . . . . . . . . . . . . . . . . . .59
1.1 Timbres . . . . . . . . . . . . . . . . . . . .59
1.2 Tonalidad tecla . . . . . . . . . . . . . . .59
1.3 Volumen . . . . . . . . . . . . . . . . . . . .59
Get It Now . . . . . . . . . . . . . . . . . . . . .48
Acceso y Opciones . . . . . . . . . . . . . .49
1. Get It Now . . . . . . . . . . . . . . . . . . . .49
2. Obtenir info . . . . . . . . . . . . . . . . . . .50
Mobile Web . . . . . . . . . . . . . . . . . . . .50
VX4650 5
Contents
2.* Estado de Luz . . . . . . . . . . . . . . .63
Para vehículos equipados con bolsas
de aire . . . . . . . . . . . . . . . . . . . . . . . .73
8. Info de tel . . . . . . . . . . . . . . . . . . . . .69
8.1 Mi # de tel . . . . . . . . . . . . . . . . . .69
8.2 S/W Versión . . . . . . . . . . . . . . . . .69
8.3 Glosario de iconos . . . . . . . . . . .69
8.4 Ayuda de acceso directo . . . . . .69
3. Sistema . . . . . . . . . . . . . . . . . . . . . . .63
3.1 Seleccione Sistema . . . . . . . . . .63
3.2 Fijar NAM . . . . . . . . . . . . . . . . . .63
3.3 Auto NAM . . . . . . . . . . . . . . . . . .64
3.4 Sist. de servicio . . . . . . . . . . . . . .64
4. Seguridad . . . . . . . . . . . . . . . . . . . . .64
4.1 Bloq. Teléfono . . . . . . . . . . . . . . .64
4.2 Llamada Restringidas . . . . . . . . .65
4.3 Emergencia #s . . . . . . . . . . . . . .65
4.4 Cambiar Bloquear . . . . . . . . . . . .65
4.5 Borrar Contactos . . . . . . . . . . . . .65
4.6 Restablecer Implícito . . . . . . . . .66
5. Funciones . . . . . . . . . . . . . . . . . . . . .66
5.1 Reintento automático . . . . . . . . .66
5.2 Respuesta de llamada . . . . . . . .66
5.3 Auto Respuesta automát . . . . . .66
5.4 Marcaciones de un toque . . . . .67
5.5 Privacidad de voz . . . . . . . . . . . .67
5.6 Auto Volumen . . . . . . . . . . . . . . .67
5.7 Modalidad TTY . . . . . . . . . . . . . .67
6. Configuración de datos . . . . . . . . .68
6.1 Datos/Fax . . . . . . . . . . . . . . . . . . .68
6.2 Conexión al PC . . . . . . . . . . . . . .68
7. Lugar . . . . . . . . . . . . . . . . . . . . . . . . .69
Información de seguridad . . . . . . .73
Seguridad del cargador y del
adaptador . . . . . . . . . . . . . . . . . . . . . .73
Información y cuidado de la batería .73
Seguridad . . . . . . . . . . . . . . . . . . . . . .70
Peligros de explosión, descargas
eléctricas e incendio . . . . . . . . . . . . .74
Información de seguridad de la
TIA . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
Exposición a las señales de
radiofrecuencia . . . . . . . . . . . . . . . . .70
Aviso general . . . . . . . . . . . . . . . . . . .74
Actualización de la FDA para los
consumidores . . . . . . . . . . . . . . . . . .76
Cuidado de la antena . . . . . . . . . . . .70
Funcionamiento del teléfono . . . . . .70
10 Consejos de Seguridad para
Conductores . . . . . . . . . . . . . . . . . . .84
Sugerencias para un funcionamiento
más eficiente . . . . . . . . . . . . . . . . . . .70
Información al consumidor sobre
la SAR . . . . . . . . . . . . . . . . . . . . . . . .86
Manejo . . . . . . . . . . . . . . . . . . . . . . . .71
Dispositivos electrónicos . . . . . . . . .71
Marcapasos . . . . . . . . . . . . . . . . . . . .71
Aparatos para la sordera . . . . . . . . . .71
Otros dispositivos médicos . . . . . . .72
Centros de atención médica . . . . . .72
Vehículos . . . . . . . . . . . . . . . . . . . . . .72
Aeronaves . . . . . . . . . . . . . . . . . . . . .72
Áreas de explosivos . . . . . . . . . . . . .72
Accesorios . . . . . . . . . . . . . . . . . . . . .88
Información de la garantía . . . . . . . .90
Índice . . . . . . . . . . . . . . . . . . . . . . . . . . .91
Atmósfera potencialmente
explosiva . . . . . . . . . . . . . . . . . . . . . .72
6 VX4650
Bienvenidos
Felicidades por elegir el avanzado y compacto teléfono
celular VX4650, diseñado para funcionar con la más
reciente tecnología de comunicaciones móviles digitales:
Acceso múltiple de división de código (Code Division
Multiple Access, CDMA). Junto con las muchas funciones
avanzadas del sistema CDMA, como una claridad de voz
enormemente mejorada, este teléfono ofrece:
Información importante
Esta guía del usuario contiene información importante
acerca del uso y funcionamiento del teléfono. Lea toda la
información con cuidado antes de usar el teléfono para
obtener un desempeño óptimo y evitar cualquier daño o
mal uso del aparato. Cualquier cambio o modificación no
aprobados anulará la garantía.
G
Gran pantalla de cristal líquido de fácil lectura con luz
Cumplimiento de clase B según el artículo 15 de la FCC
trasera y 7 líneas, e iconos de estado.
Este dispositivo y sus accesorios cumplen con el artículo 15
de las reglas de la FCC. La operación está sujeta a las dos
G
Localizador, mensajería, correo de voz e identificador de
llamadas.
condiciones siguientes: (1) Este dispositivo
y
sus
G
Teclado de 18 teclas.
accesorios no podrán causar interferencias dañinas y (2)
este dispositivo y sus accesorios deben tolerar cualquier
interferencia que reciban, incluida aquélla que pueda
provocar un funcionamiento incorrecto.
G
Función de altavoz.
G
Interface activada por menús con indicaciones para
fácil operación y configuración.
G
Detalles técnicos
Respuesta con cualquier tecla, respuesta automática,
remarcado automático, marcado con una tecla y
marcado rápido con 99 ubicaciones de memoria.
EL VX4650 es un teléfono de banda doble que funciona en
las dos frecuencias de Acceso múltiple de división de
código (CDMA): servicios celulares a 800 MHz y Servicios
de comunicación personal (Personal Communication
Services, PCS) a 1.9 Ghz. La tecnología CDMA usa una
función llamada DSSS (Direct Sequence Spread Spectrum,
G
Funciones bilingües (inglés y español).
VX4650 7
Bienvenidos
Espectro propagado de secuencia directa) que permite
que el teléfono evite que se cruce la comunicación y que
varios usuarios empleen un canal de frecuencia en la
misma área específica. Esto da como resultado una
capacidad 10 veces mayor en comparación con el modo
analógico. Además, las funciones como handoff
(transferencia de enlace) suave y más suave, handoff duro
y tecnologías de control de la potencia de radiofrecuencia
dinámica se combinan para reducir las interrupciones en
las llamadas.
Las redes celular y CDMA PCS constan de MSO (Oficina
de conmutación de telefonía móvil), BSC (Controlador de
estación de base), BTS (Sistema de transmisión de
estación de base) y MS (Estación móvil). La tabla siguiente
muestra algunos de los principales estándares CDMA.
Estándar de
Institución
designada
Descripción
CDMA
Interfaz de aire tri-modo CDMA
Protocolo de enlace de radio de
14.4 kbps y operaciones
interbandas
ICS-95 adoptado para la interfaz
de aire 1xRTT cdma2000 de
banda de frecuencia PCS
TIA/EIA-95A
TSB-74
ANSI J-STD-008
TIA/EIA-IS2000
ANSI TIA/EIA 553A
Interfaz de aire
básica
MAS-BS
PCSC-RS
Operaciones intersistemas
Comunicación de datos de no
señalización
TIA/EIA/IS-634
TIA/EIA/IS/651
TIA/EIA/IS-41-C
TIA/EIA/IS-124
Red
Speech CODEC
Asignar datos y fax
Servicio de mensajes cortos
Datos de paquete
Servicio de determinación de
posición (gpsOne)
TIA/EIA/IS-96-B
TIA/EIA/IS-99
TIA/EIA/IS-637
TIA/EIA/IS-657
Servicio
*TSB -74: Protocolo entre un sistema IS-95A y ANSI J-
STD-008
El sistema 1xRTT recibe el doble de suscriptores en la
sección inalámbrica que IS-95. La duración de su batería
es del doble que la de IS-95. También es posible la
transmisión de datos de alta velocidad.
IS-801
TIA/EIA/IS-707-A
Datos de paquete de alta
velocidad
TIA/EIA/IS-97
TIA/EIA/IS-98
ANSI J-STD-018
ANSI J-STD-019
TIA/EIA/IS-125
Estación de base celular
Estación de móvil celular
Estación personal PCS
Estación de base PCS
Speech CODEC
Función
8 VX4650
componentes metálicos. Evite el uso de accesorios que no
puedan conservar una distancia de 2 cm (3/4 pulgadas)
entre el cuerpo del usuario y la parte posterior del teléfono
y que no se hayan probado para determinar que cumplen
los límites de la exposición a radiofrecuencias de la FCC.
Información sobre la exposición a radiofrecuencias
de la FCC
¡ADVERTENCIA! Lea esta información antes de hacer
funcionar el teléfono.
En agosto de 1996, la Comisión Federal de
Comunicaciones(FCC) de Estados Unidos, con su acción
en el Informe y orden FCC 96-326, adoptó una norma de
seguridad actualizada para la exposición humana a la
energía electromagnética de radiofrecuencias (RF) que
emiten los transmisores regulados por la FCC. Esos
lineamientos corresponden a la norma de seguridad
establecida previamente por organismos de estándares
tanto de EE.UU. como internacionales.
Antena externa instalada en un vehículo
(Opcional, en caso de estar disponible).
Debe mantenerse una distancia mínima de 20 cm (8
pulgadas) entre el usuario o transeúnte y la antena externa
montada en el vehículo para satisfacer los requisitos de
exposición a RF de la FCC. Para obtener más información
sobre la exposición a RF, visite el sitio Web de la FCC en
www.fcc.gov.
El diseño de este teléfono cumple los lineamientos de la
FCC y esas normas internacionales.
Precaución
Utilice solamente la antena incluida y aprobada. El uso de
antenas no autorizadas o el hacerle modificaciones podría
deteriorar la calidad de la llamada, dañar el teléfono,
invalidar la garantía o dar como resultado una violación de
los reglamentos de la FCC.
No utilice el teléfono con una antena dañada. Si una
antena dañada entra en contacto con la piel, puede
producirse una pequeña quemadura. Comuníquese con su
distribuidor local para obtener un reemplazo de la antena.
Contacto corporal durante el funcionamiento
Este dispositivo se ha probado para un funcionamiento
ordinario manteniendo la parte posterior del teléfono a 2
cm (3/4 de pulgada) del cuerpo. Para cumplir los requisitos
de exposición a RF de la FCC, debe mantenerse una
distancia de separación mínima de 2 cm (3/4 de pulgada)
entre el cuerpo del usuario y la parte posterior del
teléfono, incluida la antena, ya sea extendida o retraída.
No deben utilizarse clips para cinturón, fundas
y
accesorios similares de otros fabricantes que tengan
VX4650 9
Descripción general del eléfono
1. Audífono
17
2. Tapa Abra la tapa para contestar una llamada entrante y ciérrela para
terminar la llamada.
3. Pantalla de cristal líquido Muestra mensajes e iconos indicadores.
4. Tecla suave izquierda Se usa para mostrar el menú de configuración
de funciones.
5. Teclas lateral Úselas para ajustar el volumen del timbre en modo de
espera y el volumen del auricular durante una llamada.
6. Tecla Send Utilícela para hacer o contestar llamadas.
1
2
7. Tecla de marcado por voz Uso de la Tecla de comandos de voz para
acceder rápidamente a los Comandos de voz y modo de conduccion.
3
8. Mod. de manerae Úsela para configurar el modo (en modo de espera,
presione
y manténgala así durante unos 3 segundos).
9
10
9. Tecla suave derecha Se usa para seleccionar una acción dentro de un
menú.
4
10. Tecla de navegación Se usa para tener acceso rápido a Mensajes, al
Atajo, al Get It Now y a Mobile Web.
11
11. Tecla de altavoz Úsela para fijar el Modo de altavoz.
12. Tecla End/Power Úsela para apagar o encender el teléfono y para
terminar una llamada. También regresa a la pantalla del menú principal.
13. Tecla Clear Presiónela para borrar un espacio o un carácter.
Manténgala presionada para borrar palabras completas.
14. Teclado alfanumérico Úselo para introducir números y caracteres y
para seleccionar elementos de menú.
15. Tecla de modo de bloqueo Úsela en modo de espera para fijar la
5
6
7
12
13
14
8
15
función de bloqueo manteniéndola presionada
16. Micrófono
17. Conector del auricular
unos 3 segundos.
16
10 VX4650
Descripción general de los menús
Contactos
Mensajes
Voz
1. Comando de voz
2. Modos de sonido
3. Anunciar alertas
4. Mejor coincidencia
5. Comando de entrenamiento
6. Ayuda
1. Lista de Contactos
2. Nuevo Número
3. Nuevo E-mail
4. Grupos
5. Marcaciones Rápidas
6. Mi tarjeta V
1. Correo de voz
2. Nuevos mensaje
3. Entrada
4. Salida
5. Guardado
6. Configuraciones de mensaje
1. Auto guardar
2. Auto borrar
3. Llame al #
Lista Llam
1. Llam. saliente
Get It Now
1. Get It Now
2. Obtenir info
4. Firma
2. Llam. entrante
3. Llam. fracasada
4. Borrado Llam.
1. Llamadas de Salida
2. Llamadas de Entrada
3. Llamadas no Recibidas
4. Todas Llamadas
5. Tiempo de uso
1. Última Llamada
2. Llamadas de Base
3. Llamadas de Roam
4. Todas las Llamadas
6. Contador de KB
1. Recibido
5. Correo de voz #
6. Vista automatica
7. Modalidad de asentar
8. Texto rápido
9. Reporduccion automatica
7. Borrar todo
1. Entrada
Mobile Web
1. Iniciar Browser
2. Mensajes de Web
3. Alertas Web
2. Salida
3. Guardado
4. Todos
2. Transmitido
3. Total
VX4650 11
Descripción general de los menús
2. Llamada Restringidas
3. Emergencia #s
4. Cambiar Bloquear
5. Borrar Contactos
6. Restablecer Implícito
Media
1. Imágenes
2. Sonido
Ambiente
1. Sonidos
1. Timbres
2. Tonalidad tecla
3. Volumen
3. Objetos de mensaje de texto
5. Funciones
1. Pequeña img
2. Grandes img
3. Mis imágenes
4. Sonidos
5. Mi melodia
6. Animaciónes
7. Mis animaciónes
1. Reintento automático
2. Respuesta de llamada
3. Auto Respuesta automát
4. Marcaciones de un toque
5. Privacidad de voz
6. Auto Volumen
4. Alerta de mensaje
5. Servicio Alertas
6. Tono de activación/
desactivación
7. Tono de DTMF
2. Mostrar
7. Modalidad TTY
1. Pendon
6. Configuración de datos
1. Datos/Fax
2. Iluminación de fondo
3. Pantallas
Aparato
1. Plan
2. Conexión al PC
4. Estilo del menú
5. Relojes
7. Lugar
2. Alarma de reloj
1. Alarma 1
2. Alarma 2
3. Alarma 3
4. Alarma rápida
3. Memo Vocal
4. Atajo
5. Nota
6. Ez Sugerencia
7. Calculadora
8. Info de tel
6. Colores de tema
7. Contraste
1. Mi # de tel
2. S/W Versión
3. Glosario de iconos
4. Ayuda de acceso directo
8. Fuente
9. Idioma
0. Poder-Salvo
*. Estado de Luz
3. Sistema
1. Seleccione Sistema
2. Fijar NAM
3. Auto NAM
8. Reloj universal
4. Sist. de servicio
4. Seguridad
1. Bloq. Teléfono
12 VX4650
Para hacer funcionar su teléfono por primera vez
¡Advertencia! Use únicamente el cargador que viene
incluido con el teléfono. El uso de cualquier cargador
La batería
distinto del que viene incluido con el VX4650 puede dañar
el teléfono o la batería.
NOTA
Es importante cargar completamente la batería
antes de usar el teléfono por primera vez.
El teléfono viene con una batería recargable. Conserve
cargada la batería cuando no use el teléfono, para
mantener al máximo el tiempo de llamada y de espera. El
nivel de carga de la batería se muestra en la parte superior
de la pantalla de cristal líquido.
1. Conecte el terminal redondeado del adaptador AC en el
teléfono (con la batería instalada) y el otro terminal en
el tomacorriente de la pared.
2. El tiempo de carga varía en función del nivel de la
batería. El tiempo de carga máximo para una batería
totalmente descargada es de 3.5 horas.
Instalación de la batería
Para instalar la batería, introduzca la parte inferior de la
batería en la abertura que hay en la parte posterior del
teléfono. Empuje la batería hacia abajo hasta que el
seguro haga clic.
Nivel de carga de la batería
El nivel de carga de la batería se muestra en la parte
superior derecha de la pantalla de cristal líquido. Cuando
el nivel de carga de la batería es bajo, el sensor de batería
baja le avisa de tres formas: haciendo sonar un tono
audible, haciendo parpadear el icono de la batería y
mostrando la leyenda ¡ADVERTENCIA DE BATERÍA BAJA!
Si el nivel de carga de la batería llega a estar muy bajo, el
teléfono se apaga automáticamente y no se guarda
ninguna función en curso
Extraer la batería
Apague el teléfono. Levante el seguro de liberación para
extraer la batería.
Cargar la batería
El cargador de escritorio tiene una ranura de carga que
puede recibir al teléfono con la batería en su sitio o la
batería sola.
Totalmente cargada
Totalmente descargada
VX4650 13
Para hacer funcionar su teléfono por primera vez
Encender y apagar el teléfono
Fuerza de la señal
La calidad de las llamadas depende de la fuerza de la
señal en su zona. La fuerza de la señal se muestra en la
pantalla según el número de barras que aparecen junto al
icono de fuerza de la señal: Entre más barras haya, mejor
será la fuerza de la señal. Si la calidad de la señal es mala,
trasládese a un sitio abierto. Si está en un edificio, la
recepción puede ser mejor cerca de una ventana.
Encender el teléfono
1. Instale una batería cargada o conecte el teléfono a una
fuente de corriente externa, como el adaptador del
encendedor del auto, o a un kit de manos libres para
automóvil.
2. Presione
durante unos segundos hasta que se
encienda la pantalla de cristal líquido.
NOTA
Es importante cargar completamente la batería
antes de usar el teléfono por primera vez.
Apagar el teléfono
1. Mantenga presionada
pantalla.
hasta que se apague la
14 VX4650
Iconos en pantalla
Cuando el teléfono está encendido, la línea superior de la pantalla de cristal líquido muestra iconos que indican el estado
del teléfono.
Indicador de la fuerza de la señal. La fuerza de la
señal que recibe el teléfono se indica mediante el
número de barras visibles.
Sesión de datos
Alarma
Indicador de la batería. Indica el nivel de carga de
la batería.
Indicador de estado activo. Se está realizando una
llamada.
* La ausencia de icono indica que el teléfono está en
modo de espera.
Modo de manerae.
Silenciar todo.
Indicador de ausencia de servicio. El teléfono no
está recibiendo una señal de sistema.
Analógico
Indicador digital. Servicio
digital disponible.
Indicador de mensaje nuevo o mensaje del
Navegador.
SSL
TTY
Ubicación en modo.
Modo de sólo E911.
Indicador de correo de voz nuevo.
Indicador de nuevo mensaje de texto y voz.
Indicador de servicio 1x.
Mod. conducción
Mod. anunciar
SSL
SSL
TTY
TTY
Indicador de roaming. El teléfono está fuera del
área de servicio local.
Anunciar alertas
Altavoz activado.
VX4650 15
Para hacer funcionar su teléfono por primera vez
Corrección de errores de marcado
Hacer llamadas
1. Cerciórese de que el teléfono esté encendido. En caso
contrario, presione por cerca de 3 segundos.
Si comete un error al marcar un número, presione
una vez para borrar el último número que introdujo o
mantenga presionada
para borrarlos todos.
durante al menos 2 segundos
2. Introduzca el número de teléfono (incluya el código de
área si fuera necesario).
3. Oprima
.
Si el teléfono está bloqueado, introduzca el código de
bloqueo.
Remarcado de llamadas
1. Presione
dos veces para remarcar el último
número que marcó. Los últimos 30 números se
almacenan en la lista del historial de llamadas y
también puede elegir una de éstas para remarcar.
Llamada fallida - indica que la llamada no se hizo.
Restringida
-
indica que las llamadas salientes están en
modo restringido.
Recibir llamadas
NOTA
Si el teléfono está restringido, sólo podrá
marcar números de teléfono guardados en los
Números de emergencia o en sus Contactos.
Para desactivar esta función:
1. Cuando el teléfono suene o vibre, presione
contestar.
para
NOTA
Si presiona
o
(las teclas laterales),
Menú ->
Ambiente ->
Seguridad ->
Llamada
cuando el teléfono está sonando, se silencia el
timbre o la vibración de esa llamada.
Anote código de bloqueo ->
Restringidas -> Apagado -> OK
2. Presione
llamada.
dos veces para dar por terminada la
4. Presione
para dar por terminada la llamada.
16 VX4650
Acceso rápido a funciones prácticas
Cancelación rápida del modo de bloqueo
Modo de manerae
1. Presione la Tecla suave derecha
introduzca su contraseña de 4 dígitos.
Desbloq e
Use el modo de manerae en lugares públicos. Cuando
está activado el modo de manerae, aparece
pantalla, se silencian los tonos de teclas y el
teléfono se configura para vibrar.
en la
Función de Mudo
La función de silencio impide que la otra persona
escuche la voz de usted, pero le permite a usted
escuchar a la otra persona.
Activación rápida del modo de manerae
1. En modo de espera, presione
segundos.
durante más de 3
Activación rápida del silencio
Cancelación rápida del modo de manerae
1. Presione para pasar al modo normal.
1. Presione la tecla suave izquierda
una llamada.
Mudo durante
Cancelación rápida del silencio
Modo de bloqueo
1. Oprima otra vez la tecla suave izquierda
Qu.mudo.
Use el modo de bloqueo para evitar que otras personas
puedan usar el teléfono. Al fijarse el modo de bloqueo, se
requiere de su contraseña de 4 dígitos para usar el
teléfono.
Ajuste rápido del volumen
Use las teclas laterales para ajustar el volumen del
auricular y del timbre. La tecla superior aumenta el
volumen y la inferior lo disminuye.
NOTA El código de bloqueo o contraseña son las 4 últimas
cifras de su número de teléfono.
G
El volumen del auricular se puede ajustar durante una
llamada. El volumen del campanero se puede ajustar
durante una llamada.
Activación rápida del modo de bloqueo
1. En modo de espera, presione
durante 3 segundos.
NOTA El volumen del sonido de las teclas se ajusta por
medio del Menú. (Menú -> 9 -> 1 -> 3).
VX4650 17
Acceso rápido a funciones prácticas
identidad de la persona que llama está almacenada en
Ajustando El Altavoz Encendido
Cuando durante una llamada, Altavoz On activo
rápidamente presionando la Tecla de altavoz.
Contactos, aparece el nombre con el número. Hable con
su proveedor de servicio para cerciorarse de si ofrece
esta función.
NOTA Para cancelar el Altavoz On, presione la Tecla de
altavoz otra vez.
Marcado rápido
El marcado rápido es una práctica función que le permite
hacer llamadas telefónicas de manera rápida y fácil con
solo tocar unas pocas teclas. Su teléfono recuerda el
número de sus Contactos, lo muestra brevemente y lo
marca. El número 1 de marcado rápido siempre es para
Correo de voz.
Llamada en espera
Es posible que su servicio celular le ofrezca el servicio de
llamada en espera. Mientras una llamada está en curso,
dos sonidos indican que otra llamada está entrando.
Cuando está habilitada la llamada en espera, puede poner
en retención la llamada activa mientras contesta la otra
llamada que está entrando. Hable con su proveedor de
servicio celular para pedirle información sobre esta
función.
Marcados rápidos del 2 al 9
Mantenga presionado el número de marcado rápido.
O
Introduzca el número de marcado rápido y presione
.
1. Presione
2. Presione
para recibir una llamada en espera.
de nuevo para alternar entre llamadas.
Marcados rápidos del 10 al 99
Presione el primer número
presionada la tecla del segundo.
O
y
luego mantenga
ID del llamador
El identificador de llamadas muestra el número de la
persona que llama cuando suena su teléfono. Si la
Introduzca el primero y segundo dígitos y presione
.
18 VX4650
Marcado con comandos de voz
El Comando de voz es una función conveniente que le
permite activar algunas funciones rápida y fácilmente con
comandos verbales. Con estos Comandos de voz, puede
hacer llamadas telefónicas, confirmar correo de voz y
llamadas perdidas, configurar el modo de manejo o
anuncios, editar las entradas de contactos y demás.
1. Presione la tecla ( )de Marcado por voz.
2. Cuando se le pida, diga "Call Someone".
3. Cuando se le pida, diga el nombre guardadro en su lista
de Contactos. El teléfono le pedirá que confirme el
nombre y marcará el número asociado con el nombre
del contacto.
NOTA Otra forma de activar el Comando de voz es activar
Modo de anuncio/Modo de conducción. Cuando la
tapa se abra, se le pedirá que diga un comando.
VX4650 19
Introducir y editar información
Modos de introducción de texto
Introducción de texto
Hay cinco modos de introducir texto, números,
caracteres especiales y signos de puntuación. En un
campo de entrada de texto, al oprimir la Tecla suave
Puede introducir y editar su Pendon, su Plan, sus
Contactos y sus Mensajes.
Funciones de las teclas
derecha
( o Tecla suave izquierda) aparece una lista
Tecla suave derecha (Tecla suave
izquierda):Presiónela para desplazarse por los
emergente de modos de texto.
siguientes modos de introducción de texto:
Pala. T9 -> Abc -> 123 -> Símbolos -> Smiley.
(
)
Modo PalabraT9 (T9)
Se usa para escribir texto con una presión de tecla por
cada letra. El teléfono traduce las presiones de tecla en
palabras comunes usando las letras de cada tecla y una
base de datos comprimida.
Mayús: Presione para cambiar de mayúsculas a
minúsculas y viceversa.
Texto T9: Pala. T9 -> PALA. T9 -> pala. T9
Abc texto: Abc -> ABC -> abc
Siguiente: En modo T9, presione para mostrar
otras palabras que coincidan.
Modo Abc (Multi-toque)
Se usa para agregar palabras a la base de datos T9.
Espacio: Presione para dar por terminada una
palabra e introducir un espacio.
Modo 123 (Números)
Clear: Presiónela para borrar un solo espacio o
carácter. Manténgala presionada para borrar
palabras.
Se usa para escribir texto con una presión de tecla por
cada número.
Puntuación: En modo de T9, presione para
insertar puntuación en una palabra y dar por
terminada una oración.
Modo de Símbolos
Se usa para introducir caracteres especiales o signos de
puntuación. Hay 39 caracteres especiales, incluido “SP”,
que introduce un espacio y “LF” que fuerza al texto para
que pase a la siguiente línea.
NOTA Cuando se cambia el tono DTMF de pitido a inglés o
español. (Menú -> 9 -> 1 -> 2), el teléfono anuncia
los números que se oprimen en el teclado.
20 VX4650
Modo de Smiley
2. Presione
texto que desea usar.
para resaltar el modo de introducción de
Se usa para introducir imágenes de emoticones. Hay 40
caracteres de emoticones.
3. Presione
para seleccionar el modo de entrada de
Cambiar a mayúsculas o minúsculas
texto resaltado.
Con los modos de introducción de texto T9 y Abc, puede
Uso de la entrada de texto Abc (Multi toques)
fijar el uso de mayúsculas. Presione
los siguientes en orden:
para recorrer
1. Presione la Tecla suave derecha
izquierda) para pasar a modo Abc.
(o Tecla suave
Mayúscula inicial (Pala. T9 / Abc)
2. Presione
ABC.
para cambiar a Bloqueo de mayúsculas
Sólo la primera letra aparece en mayúsculas. Todas las
letras subsiguientes son en minúsculas.
3. Presione
.
Bloqueo de mayúsculas (PALA. T9 / ABC)
Aparece LG
.
Todas las letras aparecen en mayúsculas.
Uso de la entrada de texto en modo T9
Minúscula ( pala. T9 / abc)
1. Presione la Tecla suave derecha
(o Tecla suave
Todas las letras aparecen en minúsculas.
izquierda) para pasar a modo de Pala.T9.
2. Presione
3. Presione
introducir un espacio.
.
Ejemplos de introducción de texto
Mostrar los modos de texto y seleccionar uno de ellos:
para dar por terminada una palabra e
1. En un campo de introducción de texto, presione la Tecla
4. Presione
.
suave derecha
(o Tecla suave izquierda) para
mostrar los modos de texto.
Aparece Llame la oficina.
VX4650 21
Introducir y editar información
Uso de la tecla SIG
4. Presione
para borrar la palabra existente.
.
Cuando haya terminado de introducir una palabra, si la
palabra que aparece no es la que usted desea, presione
para mostrar otras opciones de palabras de la base
de datos.
5. Presione
Aparece cms.
6. Presione
.
áñp is displayed.
1. Presione
.
Aparece Home.
2. Presione
.
La pantalla le da opciones adicionales tales como:
Inme, Góme, Hond, etc.
Agregar palabras a la base de datos T9
Si una palabra no está en la base de datos T9, agréguela
con la entrada de texto en modo Abc (Multi toque). La
palabra se agrega automáticamente a la base de datos T9.
1. Presione la Tecla suave derecha
(o Tecla suave
izquierda) para pasar a modo Abc (multi-toque).
2. Presione
.
Aparece Áñp.
3. Presione la Tecla suave derecha
(o Tecla suave
izquierda) para pasar al modo T9 para agregar la
palabra Áñp a la base de datos T9.
22 VX4650
Contactos en la memoria del teléfono
Entradas de contactos
5
Introduzca el nombre (hasta 22
caracteres) del número telefónico y
Esto le permite un fácil acceso a los números telefónicos
que marca con mayor frecuencia. Puede almacenar
hasta 500 entradas con hasta 5 números telefónicos cada
una. Cada entrada puede tener hasta 22 caracteres.
Cada número telefónico puede tener hasta 48 dígitos.
presione
.
NOTA Para evitar tener que poner el
nombre presione
para ir al
paso siguiente.
Aparece brevemente un mensaje de
confirmación.
Aspectos básicos del almacenamiento de
entradas de contactos
NOTA Para personalizar aún más la
entrada del Contacto, presione la Tecla
1. En el modo de espera introduzca el
número de teléfono (de hasta 48
dígitos) que desee guardar.
2. Oprima la tecla suave izquierda
Guardar.
suave izquierda
Termin. o oprima
para volver a la Pantalla del menú principal.
6. Siga guardando la entrada como
Marcación Rápida, presione
para
3. Use
para seleccionar una
seleccionar Marcación Rápida.
7. Introduzca un dígito de Marcación
Rápida (p. ej. 2) Use el teclado y
Etiqueta y presione
.
Base / Base2 / Oficina1 / Oficina2 /
Móvil / Móvil2 / Biper / Fax / Fax2 /
Ninguno
presione
resaltar la ubicación de Marcación
Rápida y presione
o bien Use
para
4. Use
para seleccionar Nuevo
.
Nombre o Existiendo y presione
.
8. Para personalizar aún más la entrada
del Contacto, presione la Tecla suave
NOTA Use Existente para agregarotro
número de teléfono a un contacto
que ya esté almacenado en la
memoria.
izquierda Termin.o oprima
para
volver a la Pantalla del menú principal.
VX4650 23
Contactos en la memoria del teléfono
Opciones para personalizar sus contactos
5. Presione la Tecla suave izquierda
Termin. para
seguir modificando la entrada de Contacto.
Una vez que se ha almacenado la información esencial de
número de teléfono y nombre en sus Contactos, puede
modificar o personalizar las entradas.
NOTA Puede cambiar el nombre del grupo, y agregar o
borrar grupos.
1. Oprima la Tecla suave derecha
Contactos y use
para resaltar la entrada de Contacto que desea
Cambiar el timbre de llamada
editar, y oprima
.
Le permite identificar quién está llamando configurando
timbres distintos para distintos números de teléfono de sus
Contactos. El timbre predeterminado se fija automáticamente
cuando se guarda el Contacto.
2. Presione la Tecla suave izquierda
llegar a la pantalla de Redacte Contacto.
Modific. para
3. Use
para resaltar la información que desea
personalizar y presione
.
1. Oprima la Tecla suave derecha
Contactos y use
para resaltar una ntrada, luego oprima
.
Agregar o cambiar el grupo
2. Presione la tecla suave izquierda Modific..
para resaltar Implícito Timbre y presione
Le permite administrar sus entradas de Contactos
organizándolas en grupos.
3. Use
4. Use
.
1. Oprima la Tecla suave derecha
para resaltar una entrada,
Contactos y use
para seleccionar el Tipo de timbrado y
.
presione
luego oprima
.
5. Presione la Tecla suave izquierda
Termin. para
2. Presione la tecla suave izquierda
Modific..
seguir modificando la entrada de Contacto.
3. Use
para resaltar No Grupo y presione
.
4. Use
para seleccionar el Grupo y presione
.
No Grupo/Familia/Amigos/Colegas/Negocio/Escuela
24 VX4650
Cambiar el timbre de mensaje
3. Use
4. Introduzca texto y presione
5. Presione la Tecla suave izquierda
para resaltar Memo y presione
.
Le permite identificar quién le está enviando un mensaje
configurando timbres distintos para distintos números de
teléfono de sus Contactos. El timbre predeterminado se fija
automáticamente cuando se guarda el Contacto.
.
Termin. para
seguir modificando la entrada de Contacto.
1. Oprima la Tecla suave derecha
Contactos y use
Agregar o cambiar la imagen de identificación
para resaltar una entrada, luego oprima
.
Permite que el teléfono muestre una imagen para
identificar a la persona que llama.
2. Presione la tecla suave izquierda Modific..
3. Use
presione
para resaltar Implícito Texto Msj Timbre y
.
1. Oprima la Tecla suave derecha
Contactos y use
para resaltar una entrada, luego oprima
.
4. Use
presione
para seleccionar el Tipo de timbrado y
.
2. Presione la tecla suave izquierda Modific..
para resaltar Implícito y presione
3. Use
.
5. Presione la Tecla suave izquierda
Termin. para
4. Presione la Tecla suave derecha
la opción adicional.
Más para exhibir
seguir modificando la entrada de Contacto.
Agregar o cambiar el memorándum
5. Use
para seleccionar un gráfico y presione
.
Le permite introducir hasta 32 caracteres como
memorándum de la entrada del Contacto.
6. Presione la Tecla suave izquierda
Seleccione.
7. Presione la Tecla suave izquierda
seguir modificando la entrada de Contacto.
Termin. para
1. Oprima la Tecla suave derecha
Contactos y use
para resaltar una entrada, luego oprima
.
2. Presione la tecla suave izquierda Modific..
VX4650 25
Contactos en la memoria del teléfono
Agregar marcado rápido
Modificar entradas de contactos
Agregar otro número de teléfono
Desde la pantalla del menú principal
1. Oprima la Tecla suave derecha
Contactos y use
para resaltar una entrada, luego oprima
2. Presione la tecla suaÏve izquierda Modific..
3. Use para resaltar el número de teléfono para el
.
1. En el modo de espera introduzca el número de teléfono
(de hasta 48 dígitos) que desee guardar.
2. Oprima la Tecla suave izquierda
Guardar.
que quiere configurar un Marcación Rápida y presione
.
3. Use para resaltar una Etiqueta y presione
.
4. Presione
presione
para seleccionar Marcación Rápida y
Base/Base2/Oficina1/Oficina2/Móvil/Móvil2/Biper/
Fax/Fax2/Ninguno
.
5. Introduzca un dígito de Marcado rápido.
Use el teclado y presione , o Use
4. Use
5. Use
para resaltar Existiendo y presione
.
para resaltar
.
para resaltar el contacto existente y presione
el dígito de Marcado rápido y presione
.
Aparece un mensaje de confirmación.
6. Presione la Tecla suave izquierda
Termin. para
seguir modificando la entrada del Contacto.
Mediante los contactos
1. Desde modo de espera, presione la Tecla suave
derecha
Sus Contactos se muestran en orden alfabético.
2. Use para resaltar la entrada de Contacto que
desea modificar y presione
Contactos.
.
3. Presione la tecla suave izquierda
Modific..
26 VX4650
5. Presione
Fijar Como valor Implícito.
4. Use
5. Introduzca el número y presione
6. Use para resaltar una Etiqueta y presione
para resaltar Add Número y presione
.
Aparece un mensaje de confirmación.
.
.
Editar números telefónicos almacenados
Aparece un mensaje de confirmación.
1 . Desde modo de espera, presione la Tecla suave
derecha
Sus Contactos se muestran en orden alfabético.
2. Use para resaltar la entrada de Contacto que
desea modificar y presione
3. Presione la tecla suave izquierda
4. Use para resaltar el número telefónico y presione
Contactos.
Números predeterminados
El número de teléfono guardado cuando se crea un
Contacto es el número predeterminado. Si se guarda más
de un número en la entrada de un Contacto, se puede
guardar otro número como predeterminado.
.
Modific..
Cambiar el número predeterminado
.
1. Desde modo de espera, presione la Tecla suave
5. Modifique el número de teléfono según sea necesario y
derecha
Sus Contactos se muestran en orden alfabético.
2. Use para resaltar la entrada de Contacto que
desea modificar y presione
3. Presione la tecla suave izquierda
4. Use para resaltar el número de teléfono que
desea fijar como Predeterminado y presione la Tecla
suave derecha Opciones.
Contactos.
presione
.
6. Use
para resaltar una etiqueta y oprima
.
Aparece un mensaje de confirmación.
.
Modific..
VX4650 27
Contactos en la memoria del teléfono
Modificar números almacenados
3. Presione la tecla suave izquierda
4. Use para resaltar la información que desea
personalizar y presione
5. Modifique la información según sea necesario y
presione
Modific..
1. Desde modo de espera, presione la Tecla suave
derecha Contactos.
.
Sus Contactos se muestran en orden alfabético.
2. Use para resaltar la entrada de Contacto que desea
.
modificar y presione
3. Presione la tecla suave izquierda
4. Use para resaltar el nombre y presione
.
6. Presione la tecla suave izquierda
Termin..
Modific..
.
Borrar
5. Modifique el nombre según sea necesario y presione
.
Borrado de un número de teléfono de un contacto
1. Oprima la Tecla suave derecha Contactos.
6. Presione la tecla suave izquierda
Termin..
2. Use
presione
para resaltar la entrada del contacto y
.
Modificar opciones personalizadas
Modifique cualquiera de las opciones de los Contactos en
la misma forma en que se creó el contacto.
3. Presione la tecla suave izquierda
4. Use para resaltar el número telefónico que va a
borrar.
5. Oprima la Tecla suave derecha
Modific..
1. Desde modo de espera, presione la Tecla suave
derecha
Sus Contactos se muestran en orden alfabético.
2. Use para resaltar la entrada de Contacto que
desea modificar y presione
Contactos.
Opciones.
6. Presione
7. Presione
Borrar Número.
.
Borrar número.
Aparece un mensaje de confirmación.
28 VX4650
Borrar una entrada de contacto
4. Use
presione
para resaltar el número de Marcado rápido y
.
1. Oprima la Tecla suave derecha
Contactos.
5. Use
presione
para resaltar la entrada de Marcado rápido y
.
2. Use
a borrar y presione
para resaltar la entrada del Contacto que va
.
6. Use
rápido.
para resaltar la ubicación de Marcado
3. Presione la tecla suave izquierda
4. Oprima la Tecla suave derecha
Modific..
Opciones.
7. Oprima la Tecla suave derecha
Opciones.
5. Presione
6. Presione
Borrar Anotación.
8. Presione
9. Presione
Deshacer.
Borrar.
Deshacer.
Aparece un mensaje de confirmación.
Aparece un mensaje de confirmación.
Otras formas de borrar un Contacto
Una vez que se encuentre en sus Contactos, si presiona
la Tecla suave derecha
Opciones. en cualquier
momento tendrá la opción de borrar la entrada.
Borrar un marcado rápido
1. Oprima la Tecla suave derecha
Contactos.
2. Use
presione
para resaltar la entrada del contacto y
.
3. Presione la tecla suave izquierda
Modific..
VX4650 29
Contactos en la memoria del teléfono
Números de teléfono con pausas
6. Use
para seleccionar el tipo de pausa y presione
. Pausa fija / Pausa 2 seg
7. Introduzca números adicionales (por ej., número NIP o
número de la tarjeta de crédito) y presione
8. Use para seleccionar una Etiqueta y presione
Al llamar a sistemas automatizados como son los de
correo de voz o de facturación de crédito, con frecuencia
tiene que introducir una serie de números. En lugar de
introducir esos números a mano, puede almacenarlos en
sus Contactos, separados por caracteres de pausa
especiales (P, T). Hay dos distintos tipos de pausas que
puede usar al almacenar un número:
.
.
9. Introduzca un nombre (de hasta 22 caracteres).
Aparece un mensaje de confirmación.
Pausa Fija (P)
Agregar una pausa a un número ya existente
El teléfono deja de marcar hasta que usted presione la
1. Oprima la Tecla suave derecha
2. Use para resaltar la entrada del Contacto que va
a editar y presione
3. Presione la tecla suave izquierda
4. Use para resaltar el número y presione
veces.
5. Oprima la Tecla suave derecha
6. Presione Pausa fija o
Contactos.
Tecla suave izquierda
siguiente.
Release para avanzar al número
.
Pausa 2 seg (T)
Modific..
El teléfono espera 2 segundos antes de enviar la
siguientes cadena de dígitos.
2
Almacenar un número con pausas
Pausa.
1. Oprima la tecla suave izquierda
Menú.
Pausa 2 seg.
2. Presione
3. Presione
Contactos.
7. Introduzca los números adicionales y presione
.
Nuevo Número.
8. Use
presione
para seleccionar el tipo de etiqueta y
.
4. Introduzca el número.
5. Oprima la Tecla suave derecha
Pausa.
Aparece un mensaje de confirmación.
30 VX4650
2. Presione una vez (o varias) la tecla que corresponda a
la letra de la búsqueda.
Búsqueda en la memoria del teléfono
El teléfono VX4650 puede llevar a cabo una búsqueda
dinámica del contenido de su memoria. La búsqueda
dinámica compara las letras o números introducidos con
las entradas de sus Contactos. Se muestra una lista de
coincidencias en orden descendente. Entonces puede
seleccionar un número de la lista para llamar o para
modificarlo. Hay varias formas de buscar:
Opciones de búsqueda
1. Oprima la Tecla suave derecha
2. Oprima la Tecla suave derecha
Contactos.
Opciones.
3. Seleccione los criterios de búsqueda con
y
,
presione
en el teclado):
(o presione el número correspondiente
G
G
G
Desplazamiento en orden alfabético
Búsqueda por letra
Búsqueda por opciones
Buscar Nombre - Introduzca los caracteres que quiera
buscar (como serían las primeras letras del nombre).
Buscar Número - Introduzca los números que
quiera buscar.
- Buscar Nombre
- Buscar Número
- Buscar Marcación Rápida - Buscar Grupo
- Buscar E-mail
Buscar Marcación Rápida - Introduzca los números
de marcado rápido que se hayan de buscar.
Desplazamiento por sus contactos
Buscar Grupo - Use
que quiera buscar y presione
Buscar E-mail - Introduzca la dirección de correo
electrónico que se haya de buscar.
para resaltar el grupo
1. Oprima la Tecla suave derecha
Contactos.
.
Se muestra la lista de contactos en orden alfabético.
2. Use para desplazarse por la lista.
4. Se muestra una lista de coincidencias.
Búsqueda por letra
1. Oprima la Tecla suave derecha
Se muestra la lista de contactos en orden alfabético.
Use
para resaltar una entrada que coincida.
Contactos.
5. Presione
para ver más información o presione
para hacer la llamada.
VX4650 31
Contactos en la memoria del teléfono
Hacer llamadas desde la memoria del teléfono
Una vez que haya almacenado números de teléfono en
sus Contactos, puede llamar a esos números de manera
rápida y sencilla.
4. Use
para resaltar el número telefónico.
para hacer la llamada.
5. Presione
Marcado rápido
G
Presionando
después de haber buscado un
Mantenga oprimida la cifra de marcado rápido u oprima
la cifra de marcado rápido y oprima
primera cifra del marcado rápido y luego mantenga
oprimida la tecla de la segunda cifra del mismo. o bien
Oprima el primer y segundo números del marcado rápido
número de teléfono en Contactos o en Llamadas
recientes.
. Oprima la
G
G
Con Marcado rápido
Con Marcado por voz
y oprima
.
Desde Contactos
Anexar un número almacenado
1. Oprima la Tecla suave derecha
Contactos.
La anexión se puede usar si está fuera de la zona local
de su sistema y tiene que agregarle el código de área a
un número ya existente. Cuando una entrada de
Contactos o un número de devolución de llamada de un
mensaje aparece en la pantalla, puede agregarle
números al principio del número original. Sin embargo no
podrá modificar el número original.
2. Use
para seleccionar el Contacto y presione
para seleccionar el número telefónico.
para hacer la llamada.
.
3. Use
4. Presione
Desde Llamadas recientes
1. Oprima la tecla suave izquierda
Menú.
1. Recupere un número de sus Lista Llam(Saliente,
Entrante, o Fracasada).
2. Presione
Lista Llam.
2. Oprima la Tecla suave derecha
3. Presione Prepend.
4. Introduzca los dígitos de anexo al número de teléfono.
5. Presione tpara hacer la llamada.
Opciones.
3. Use
y presione
para seleccionar el tipo de llamada reciente
.
Llam. saliente / Llam. entrante / Llam. fracasada /
Borrado Llam. / Tiempo de uso / Contador de KB
32 VX4650
Uso de los menús del teléfono
Acceso al menú
Oprima la Tecla suave izquierda
nueve menús de teléfono. Hay dos métodos para llegar a
los menús y submenús:
Contactos
Menú para acceder a
El Menú de contactos le permite almacenar nombres,
números de teléfono y otros datos en la memoria de su
teléfono. Al entrar a sus Contactos, el número en
paréntesis representa el número de entradas que ha
almacenado (hasta 500).
G
Use la tecla de navegación para resaltar y seleccionar,
o bien
G
Presione la tecla de número que corresponda al menú
(o submenú).
Acceso y opciones
Por ejemplo:
1. Oprima la tecla suave izquierda
2. Presione Contactos.
3. Seleccione un submenú.
Menú.
1. Oprima la tecla suave izquierda
Se muestran nueve elementos de menú.
Use para desplazarse por la lista de menús.
Menú.
2. Oprima la tecla de número que corresponda al
elemento del menú que desea seleccionar. Aparecerá
la lista del submenú.
1. Lista de Contactos
2. Nuevo Número
3. Nuevo E-mail
4. Grupos
3. Oprima la tecla de número que corresponda al
elemento del submenú que desea seleccionar.
4. Use
para resaltar su valor preferido y presione
para seleccionarlo.
5. Marcaciones Rápidas
6. Mi tarjeta V
NOTA Oprima
para retroceder un paso (cuando esté
accediendo a un Menú o seleccionando un ajuste).
Los cambios en la configuración no se guardarán.
VX4650 33
Uso de los menús del teléfono
2. Introduzca el número y presione
3. Seleccione la Etiqueta que desea y presione
4. Introduzca el nombre y presione
.
1. Lista de Contactos
Le permite ver su lista de Contactos.
1. Presione
2. Opciones desde este punto:
.
,
,
.
.
5. Siga guardando la entrada según lo necesite.
G
Presione
para desplazarse por sus Contactos
en orden alfabético.
3. Nuevo E-mail
Le permite guardar una nueva dirección de correo
electrónico.
G
Presione la Tecla suave derecha
Opciones
para seleccionar uno de los siguientes:
Buscar Nombre / Buscar Número / Buscar
Marcación Rápida / Buscar Grupo / Buscar E-mail /
Enviar Mensaje / Borrar
NOTA Con este submenú, el correo electrónico se guarda
como un nuevo Contacto. Para guardar el número
en un Contacto ya existente, modifique la entrada
del Contacto.
G
Presione la Tecla suave izquierda
almacenar
Nuevo para
1. Presione
,
,
.
2. Nuevo Número
Le permite agregar un nuevo número.
2. Introduzca la dirección de correo electrónico y oprima
.
3. Introduzca el nombre y presione
.
NOTA
Con este submenú, el número se guarda como
un nuevo Contacto. Para guardar el número en
un Contacto ya existente, modifique la entrada
del Contacto.
4. Siga guardando la entrada según lo necesite.
1. Presione
,
,
.
34 VX4650
Contactos
o bien introduzca el número de Marcado rápido y
4. Grupos
presione
3. Use
4. Use
.
Le permite ver sus Contactos agrupados, agregar un
nuevo grupo, cambiar el nombre de un grupo o borrar todo
un grupo.
para resaltar el Contacto y presione
para resaltar el número y presione
.
.
1. Presione
,
,
.
Aparece un mensaje de confirmación.
2. Opciones desde este punto:
6. Mi tarjeta V
Le permite introducir su propia tarjeta de visita virtual en
los mensajes de texto.
G
Use
presione
para resaltar un grupo que desee ver y
.
G
G
Presione la Tecla suave izquierda
agregar un grupo nuevo a la lista.
Agregar para
1. Presione
,
,
.
2. Use
eleccione la característica que desea editar
Use
suave derecha
nombre del grupo o para borrarlo.
para resaltar un grupo y presione la Tecla
resaltándola y presionando
.
Opciones para cambiar el
3. Modifique la información según sea necesario.
NOTA No puede editar su número de teléfono de Mi tarjeta
5. Marcaciones Rápidas
V, pero puede agregar otro número de teléfono.
Le permite ver su lista de Marcados rápidos o designar
Marcados rápidos para números introducidos en sus
Contactos.
1. Presione
2. Use
,
,
.
para resaltar la posición de Marcado rápido
VX4650 35
Uso de los menús del teléfono
1. Llam. saliente
2. Llam. entrante
3. Llam. fracasada
4. Borrado Llam.
5. Tiempo de uso
6. Contador de KB
Lista Llam
El Menú de Lista Llam es una lista de los últimos números de
teléfono o entradas de Contactos de llamadas que haya
realizado, aceptado o perdido. Se actualiza constantemente
con los nuevos números agregándose al principio de la lista
y las entradas más antiguas eliminándose del final.
NOTA
Para ver una lista rápida de todas sus llamadas
recientes, presione
principal.
desde el Menú
1. Llam. saliente
Le permite ver la lista de llamadas que ha hecho, puede
tener hasta 30 entradas.
G
G
G
indica una llamada realizada.
indica una llamada recibida.
indica una llamada perdida.
1. Presione
2. Use
,
,
.
para resaltar una entrada.
para ver la entrada.
Acceso y opciones
G
Presione
1. Oprima la tecla suave izquierda
Menú.
G
Presione
para lla.mar a ese número.
2. Presione
Lista Llam.
G
Oprima la Tecla suave derecha
seleccionar:
Opciones para
3. Seleccione un submenú.
Guardar / Enviar Msj. / Prepend / Borrar / Borrar todo
G
Presione
principal.
para volver a la pantalla de menú
36 VX4650
Lista Llam
2. Llam. entrante
5. Tiempo de uso
Le permite ver la lista de llamadas que ha recibido, puede
tener hasta 30 entradas.
Le permite ver la duración de las llamadas seleccionadas.
1. Presione
,
,
.
1. Presione
2. Use
,
,
.
2. Use
.
para resaltar una lista de llamadas y presione
para rzesaltar una entrada.
Última Llamada / Llamadas de Base / Llamadas de
Roam / Todas las Llamadas
3. Llam. fracasada
Le permite ver la lista de llamadas perdidas, puede tener
hasta 30 entradas.
6. Contador de KB
Le permite ver una lista de las llamadas de datos recibidas
y transmitidas.
1. Presione
2. Use
,
,
.
para resaltar una entrada.
1. Presione
2. Use
presione
,
,
.
para resaltar una lista de llamadas de datos y
.
4. Borrado Llam.
Le permite borrar las listas de llamadas que desee.
Recibido / Transmitido / Total
1. Presione
,
,
.
2. Use
para resaltar la lista de las llamadas que
desea borrar y presione
.
Llamadas de Salida / Llamadas de Entrada / Llamadas
no Recibidas / Todas Llamadas
3. Presione
Borrar o
Cancelar.
VX4650 37
Uso de los menús del teléfono
mensajes guardados.
Los mensajes de texto, los mensajes de localizador y el
buzón de correo de voz están disponibles en cuanto se
enciende el teléfono.
Mensajes
Acceso directo
Para iniciar mensajes presione la
tecla de flecha derecha
.
G
Compruebe los tipos de mensajes presionando la tecla
Acceso y opciones
de mensajes
.
1. Oprima la tecla suave izquierda
2. Presione Mensajes.
3. Seleccione un submenú.
Menú.
G
G
Haga una llamada al número de devolución de llamada
presionando
mensajes.
durante una comprobación de
1. Correo de voz: Muestra el número
de mensajes en el buzón de correo
de voz.
Lea y modifique mensajes guardados en el buzón de
salida durante la transmisión y envíelos.
El teléfono puede almacenar hasta 116 mensajes (por
ejemplo, 1 mensaje de voz, 50 mensajes de texto de buzón
de entrada, 50 mensajes de texto de buzón de salida, 15
mensajes de texto guardados). El VX4650 permite hasta
160 caracteres por mensaje, incluida la información del
encabezado. La información almacenada en el mensaje
está determinada por el modo del teléfono y la capacidad
del servicio. Puede haber otros límites al número de
caracteres disponibles por cada mensaje. Pregunte a su
proveedor de servicios acerca de las funciones y
capacidades del sistema.
2. Nuevos mensaje: Envía un mensaje.
3. Entrada: Muestra la lista de
mensajes recibidos.
4. Salida: Muestra la lista de
mensajes enviados.
5. Guardado: Muestra la lista de
mensajes guardados y borradores
de mensaje.
6. Configuraciones de mensaje:
Selecciona el tipo de aviso para los
mensajes nuevos.
7. Borrar todo: Borra todos los
38 VX4650
Mensajes
2. Opciones desde este punto:
Aviso de mensaje nuevo
G
Su teléfono le avisa de los mensajes nuevos en tres
formas.
Presione la Tecla suave izquierda
la información y después seleccione Borrar cuenta.
Eliminar para borrar
1. El teléfono muestra el mensaje en la pantalla.
G
Presione
para escuchar el mensaje o mensajes.
2. Se escucha uno de cinco tipos de timbre, si se ha
seleccionado.
2. Nuevos Mensaje
3. Aparece el icono de mensaje (
caso de un mensaje urgente, el icono parpadeará y
aparecerá Mensaje urgente.
) en la pantalla. En
Le permite enviar mensajes de texto, de localizador y
transmisiones de correo electrónico. Cada mensaje tiene
un destino (Dirección 1) e información (Mensaje). Éstos
dependen del tipo de mensaje que desea enviar.
NOTA
Si recibe el mismo mensaje dos veces, su
teléfono borrará el más antiguo y el nuevo se
almacena como Duplicar.
Aspectos básicos del envío de mensajes
1. Presione
,
,
.
2. Resaltando Dirección 1, oprima
dirección de destino.
e introduzca la
1. Correo de voz
Le permite ver los nuevos mensajes de voz grabados en el
buzón de correo de voz. Una vez alcanzado el límite de
almacenamiento, se sobrescriben los mensajes antiguos.
Cuando tiene un mensaje de voz nuevo, el teléfono le
avisa.
3. Incorpore la dirección, y presione
.
NOTA Para enviar un mensaje de localizador, presione la
Tecla suave izquierda Enviar ahora.
4. Presione
5. Escriba su mensaje (de texto o de correo electrónico) y
oprima
para ir a la pantalla del mensaje.
Para comprobar su buzón de correo de voz
.
1. Presione
,
,
.
VX4650 39
Uso de los menús del teléfono
Uso de los contactos para enviar un mensaje
6. Oprima la Tecla suave izquierda
Enviar.
Puede designar una entrada guardada en Contactos como
Dirección 1 en lugar de introducir el destino manualmente.
A confirmation message is displayed.
Personalización de los mensajes con las opciones
1. Presione
2. Oprima la Tecla suave izquierda
3. Seleccione Contactos/Lista llam/Direcciones recientes
,
,
.
1. Crear un mensaje nuevo.
Contactos.
2. Oprima la Tecla suave derecha
Opciones.
y presione
.
3. Seleccione la opción u opciones que desea personalizar.
4. Use
para resaltar la entrada del contacto que
Enviar
Envía el mensaje.
Prioridad
Le da prioridad al mensaje.
Normal / Urgente
Introduce en el mensaje un número
preprogramado de devolución de
llamada.
Encendido / Apagado / Modific.
Informa que el mensaje ha sido
entregado exitosamente al recipiente.
Mejorado / Normal
contenga el destino y presione
5. Use resaltar el número telefónico SMS o la
dirección de correo electrónico y presione
.
Llame al #
.
NOTA La función de Dirección 1 permite el envío múltiple a
hasta 10 direcciones en total.
Noticia de entrega
6. Concluir el mensaje según sea necesario.
Guardar mensaje
Borrar campo
Guarda el mensaje en la carpeta
de guardados.
Borra la dirección o el contenido
del campo del mensaje.
4. Concluir y enviar el mensaje.
40 VX4650
Mensajes
Opciones de texto
Referencia de los iconos de mensaje
Al estar creando el texto de un mensaje, puede introducir
texto personalizado.
Iconos
Descripciones
Se han transmitido los mensajes
guardados en el Centro de mensajes
cortos (SMC).
1. Crear un mensaje nuevo.
Enviado
2. Use
para resaltar Mensaje y presione
Opciones.
opciones que desea
.
3. Oprima la Tecla suave derecha
Indica que ha fallado la transmisión
de un mensaje.
Falla
4. Seleccione la opción
personalizar.
u
Se ha entregado el mensaje.
Entrega
Insertar texto rápido Inserta 12 frases predefinidas.
Indica que los mensajes están
bloqueados.
Insertar objetos
Inserta objetos en el mensaje.
Pequeña img / Grandes img / Mis
imágenes / Sonidos / Mi melodia /
Animaciónes / Mis animaciónes
Bloquear
Envío
múltiple
Indica más de un destinatario
designado.
Dar formato al texto Le permite cambiar el aspecto del
texto.
La transmisión no es posible en un
área sin servicio. Los mensajes están
pendientes de transmisión. Los
mensajes pendientes se transmiten
automáticamente cuando se
Alineación / Tamaño de la fuente /
Estilo de fuente / Color de texto /
Fondo
Pendiente
disponible del modo digital.
Guardar texto rápido Permite definir frases para insertarlas
como Insertar texto rápido.
Insertar señal
Inserta una firma predefinida.
Costumbre / Mi tarjeta V
5. Concluir y enviar o guardar el mensaje.
VX4650 41
Uso de los menús del teléfono
3. Entrada
El teléfono le avisa de 3 formas cuando recibe un
mensaje nuevo:
G
Tecla suave izquierda
Tecla suave derecha
Respond.
G
Opciones.
Borrar
Borra el mensaje seleccionado
del Buzón de entrada.
G
Mostrando una notificación de mensaje en pantalla.
G
Haciendo un sonido o vibrando, si así lo ha configurado.
Bloquear/Desbloquear Bloquea un mensaje de modo que
no se borre si se usan las
funciones Borrar buzón de
entrada o Borrar todos.
G
Haciendo parpadear
mensaje urgente.)
. (Sólo cuando recibe un
Se pueden hacer búsquedas en los mensajes de texto
recibidos, mensajes de localizador y correo electrónico, y
ver su contenido. Los mensajes recibidos se muestran
del más reciente al más antiguo.
3. Use
para resaltar un entrada mensaje y presione
.
4. Mientras que ve el mensaje seleccionado, oprima Tecla
suave izquierda
Opciones.
Respond o Tecla suave derecha
Advertencia de memoria agotada
Si la memoria está llena, no se pueden recibir más
mensajes hasta que se libere suficiente espacio de
memoria. Aparece el mensaje MEMORIA INSUFICIENTE y
no se aceptan mensajes nuevos.
Opciones desde este punto:
Responder w copiar Responde al SMS con el mensaje
original adjunto.
Reenviar
Reenvía un mensaje recibido a
otras direcciones de destino.
Borra los mensajes seleccionados
del Buzón de entrada.
Ver su buzón de entrada
Se pueden almacenar hasta 50 mensajes recibidos en la
Bandeja de entrada.
Borrar
Guardar dirección
Almacena en sus Contactos el
número de devolución de llamada,
la dirección de correo electrónico
1. Presione
2. Use
,
,
.
para resaltar un entrada mensaje
42 VX4650
Mensajes
y los números de los datos del
usuario incluidos en el mensaje
recibido.
G
G
Oprima la Tecla suave izquierda
Oprima la Tecla suave derecha
Reenviar.
Opciones.
Guardar objeto
Guarda las imágenes, animaciónes,
sonidos, melodías y objetos de
vcard en Mi carpeta y Contactos
permitiéndole usar el Papel tapiz y
el Tono de timbre.
Borrar
Borra el mensaje seleccionado
del Buzón de salida.
Bloquear/Desbloquear Bloquea un mensaje de modo que
no se borre si se usan las funciones
Borrar buzón de salida o Borrar
todos.
Guardar texto rápido Guarda el mensaje en la lista de
mensajes Grabados.
Guardar mensajes
Guarda el mensaje del Buzón de
entrada en la carpeta de
guardados.
3. Use
para resaltar un Salida mensaje y presione
.
Mientras que ve el Salida mensaje seleccionado,
oprima Tecla suave izquierda Enviado a o Tecla
suave derecha Opciones.
Borrar
Bloquear/Desbloquear Bloquea o desbloquea el mensaje
seleccionado. Los mensajes
bloqueados no pueden borrarse
con las funciones Borrar buzón
de entrada y Borrar todos.
Borra los mensajes seleccionados
del Buzón de salida.
Guardar dirección
Almacena en sus Contactos el
número de devolución de llamada,
la dirección de correo electrónico y
los números de los datos del usuario
incluidos en el mensaje recibido.
4. Salida
Se pueden almacenar hasta 50 mensajes en el Buzón de
salida. Ver listas y contenidos de los mensajes enviados y
comprobar si la transmisión fue correcta o no.
Guardar texto rápido Guarda el mensaje en la lista de
mensajes Grabados.
Guardar mensaje
1. Presione
2. Use
,
,
.
Guarda el mensaje del Buzón de
salida en la carpeta de guardados.
para resaltar un Salida mensaje.
VX4650 43
Uso de los menús del teléfono
Bloquear/Desbloquear Bloquea o desbloquea el mensaje
6. Configuraciones de mensaje
Le permite configurar diez valores para los mensajes
recibidos.
seleccionado. Los mensajes
bloqueados no pueden borrarse
con las funciones Borrar buzón de
salida y Borrar todos.
1. Presione
,
,
.
Info de mensaje
Muestra la prioridad y estado del
tipo de mensaje.
2. Use
para resaltar uno de los valores y presione
para seleccionarlo.
Auto guardar
Auto guardar / Preguntar /
No guardar
5. Guardado
Auto borrar
Llame al #
Firma
Correo de voz #
Vista automatica
Encendido / Apagado
Corrija el Llame al #
Ninguno / Costumbre / Mi tarjeta V
Corrija el voz #
Encendido / Apagado
Muestra los mensajes guardados y los borradores de
mensajes.
1. Presione
,
,
.
2. Use
para resaltar un guarado mensaje.
Modalidad de asentar Pala. T9 / Abc / 123
Texto rápido
G
Oprima la Tecla suave derecha
Oprima la Tecla suave izquierda
Resumir.
Inserta 12 frases predefinidas.
Encendido / Apagado
Reporduccion
G
Opciones.
automatica
Borrar
Borra el mensaje seleccionado
del Buzón de salida.
Descripciones de submenús de configuración de
mensajes
Bloquear/Desbloquear Bloquea un mensaje de modo que
no se borre si se usan las funciones
Borrar buzón de salida o Borrar
todos.
6.1 Auto guardar
Con esta función activada, los mensajes se guardan
automáticamente en el Buzón de salida cuando se transmiten.
Usted puede elegir Auto guardar, Preguntar, o No guardar.
44 VX4650
Mensajes
6.2 Auto borrar
Con esta función activada, los mensajes leídos se borran
automáticamente al superarse el límite de almacenamiento.
6.9 Reporduccion automatica
La pantalla se desplaza hacia abajo automáticamente
cuando se ven mensajes.
6.3 Llame al #
Le permite enviar automáticamente un número designado
de devolución de llamada al mandar un mensaje. Le
permite introducir manualmente el número.
7. Borrar todo
Le permite borrar todos los mensajes de texto guardados
en su Buzón de entrada, Buzón de salida o Mensajes
guardados. También puede borrar todos los mensajes al
mismo tiempo.
6.4 Firma
Le permite crear o modificar una firma que se envíe
automáticamente con sus mensajes. Usted puede crear
una línea de encargo de la firma o utilizar su Mi tarjeta V.
1. Presione
,
,
.
G
Presione
Entrada para borrar todos los
6.5 Correo de voz #
mensajes almacenados en el Buzón de entrada.
G
G
Le permite introducir manualmente el número de acceso para
el Servicio de correo de voz. Este número sólo debe usarse
cuando la red no proporcione el número de acceso VMS.
Presione
mensajes almacenados en el Buzón de salida.
Presione Guardado para borrar todos los
Salida para borrar todos los
6.6 Vista automatica
Le permite mostrar directamente el contenido al recibir un
mensaje.
mensajes almacenados en la carpeta Elementos
guardados.
G
Presione
Todos para borrar todos los
6.7 Modalidad de asentar
mensajes almacenados en el Buzón de entrada, el
Buzón de salida y la carpeta Elementos guardados.
Le permite seleccionar el método de introducción
predeterminado.
2. Presione
Borrar todos.
6.8 Texto rápido
Aparece un mensaje de confirmación.
Le permite mostrar, modificar y agregar frases de texto.
Éstas cadenas de texto le permiten reducir la introducción
manual de texto en los mensajes.
VX4650 45
Uso de los menús del teléfono
1. Comando de voz
Le permite configurar cómo activar el reconocimiento de
voz.
Voz
Le permite seleccionar opciones para la activación de
voz, modo de manejo, anuncio de avisos y resultados de
reconocimiento, y le permite adaptar el teléfono para que
reconozca la forma en que usted dice los números.
1. Presione
,
,
.
2. Use
para resaltar,
y
presione
para
seleccionarlo.
Flip abierto
Activa el reconocimiento de voz
siempre que abra el teléfono.
(Cuando el teléfono ya esté
abierto, el reconocimiento de voz
se activa oprimiendo la tecla de
marcado por voz.)
Acceso y opciones
1. Oprima la tecla suave izquierda
2. Presione Voz.
3. Seleccione un submenú.
1. Comando de voz
Menú.
Solo teclas laterales Activa el reconocimiento de voz
cuando abre el teléfono y oprime
2. Modos de sonido
3. Anunciar alertas
4. Mejor coincidencia
5. Comando de entrenamiento
6. Ayuda
la tecla de marcado por voz.
(Funciona como modo de Tapa
abierta, cuando se configura en
modo de Anuncio
Conducción.)
o
de
46 VX4650
Voz
2. Modos de sonido
El menú resaltado se anuncia cuando el modo Anunciar
está activado.
2. Use
seleccionarlo.
Encendido / Apagado
para resaltar, y presione
para
1. Presione
,
,
.
NOTA Cuando está seleccionada, Notificación de aviso,
aparece en la pantalla.
2. Use
para resaltar, y presione
para
seleccionarlo.
Modo de conduccion / Modo de anunciar /
Modo de normal
4. Mejor coincidencia
Después de decir un nombre o un número, el teléfono
muestra los resultados del reconocimiento: el nombre o
número que mejor coincide con el que usted dijo, y le pide
que confirme. Seleccione el número de resultados que
desea que muestre el teléfono.
Por ejemplo,
1) Oprima la tecla suave izquierda
2) Aparece la pantalla del menú principal, el
teléfono anuncia "Main menu".
3) Luego, el teléfono anuncia el primer elemento de
menú que se resalte.
Menú.
1. Presione
,
,
.
2. Use
para resaltar, y presione
para
seleccionarlo.
Resultado
4) Luego, el teléfono anuncia el primer elemento de
menú que se resalte.
Muestra el nombre o número que mejor
coincide con el que usted dijo.
5) Lectura de menú sólo hasta el primer subnivel.
4 Resultados Muestra los cuatro nombres o números
que mejor coinciden con el que dijo y
pregunta cuál es el correcto. Si dice "Sí", el
teléfono hace la llamada. Si dice "No", el
teléfono sugiere el segundo resultado de
la lista, y así sucesivamente hasta el
cuarto resultado.
3. Anunciar alertas
Le permite la notificación del identificador de llamadas y
del remitente de un mensaje, mediante la voz.
1. Presione
,
,
.
VX4650 47
Uso de los menús del teléfono
5. Comando de entrenamiento
Get It Now
El Entrenamiento de comandos es una función de
personalización opcional que ayuda a su teléfono a
reconocer la forma en que usted pronuncia los comandos.
Si no obtiene buenos resultados con los comandos de
manera consistente, haga esta breve sesión que sólo se
necesita una vez.
Get It Now (Obtenerlo ahora) le permite hacer con su
teléfono algo más que sólo hablar. Get It Now es una
tecnología y un servicio que le permite descargar y usar
aplicaciones en su teléfono. Con Get It Now, es rápido y
fácil personalizar su teléfono para adecuarlo a su estilo de
vida y a sus gustos. Sólo tiene que descargar las
aplicaciones que llamen su atención. Con una amplia
variedad de software a su disposición, desde tonos hasta
juegos y herramientas de productividad, puede estar
1. Presione
,
,
.
2. Seleccione una opción y oprima
.
Comandos / Dígitos / Sí, No / Contacto / Etiqueta de
teléfono
seguro de que encontrará algo útil, práctico
decididamente divertido.
o
3. Use
seleccionarlo.
Entrenamiento activado / Entrenamiento desactivado
para resaltar, y presione
para
Descarga de aplicaciones
Puede descargar aplicaciones y usar Get It Now en
cualquier lugar de la red Verizon Wireless siempre que su
teléfono tenga disponible señal digital. La mayoría de las
aplicaciones no requieren de una conexión de red al
utilizarse.
6. Ayuda
Le ayuda a usar el menú de Voz.
1. Presione
,
,
.
Llamadas entrantes
Mientras esté descargando una aplicación, las llamadas
entrantes se enviarán automáticamente al correo de voz, si
48 VX4650
Get It Now
está disponible. Si no tiene correo de voz, la descarga no se
verá interrumpida por una llamada entrante, pero la
persona que llama recibirá señal de ocupado. Al usar las
aplicaciones, las llamadas entrantes harán automáticamente
una pausa en la aplicación permitiéndole a usted contestar la
llamada. Al terminar la llamada, puede continuar usando la
aplicación.
1. Get It Now
Le permite descargar aplicaciones seleccionadas cuando
se muestra la lista de aplicaciones de Get It Now
transmitida de la conexión de servidor de Get It Now.
1. Presione
2. Presione
,
,
.
.
3. Seleccione el icono [Get It Now] y oprima
.
Acceso y Opciones
1. Oprima la tecla suave izquierda
2. Presione Get It Now.
3. Seleccione un submenú.
Menú.
Acceso directo
Para iniciar Get It Now presione
la tecla de flecha derecha
.
NOTA Cuando la memoria de archivos esté llena, se
mostrará el mensaje "Memoria de archivo llena.
Para hacer suficiente espacio de almacenamiento
para instalar esta ap, las siguientes ap(s) se
desactivarán temporalmente: Puede restaurar las
aps desactivadas con sólo iniciarlas, sin gastos
adicionales de compra. ¿Desea continuar?“. Si
selecciona Sí, se deshabilitarán la aplicación o
aplicaciones.
1. Get It Now: Para agregar, borrar o
deshabilitar aplicaciones de Get It
Now.
2. Obtenir info: Para ver información
sobre aplicaciones de Get It Now.
VX4650 49
Uso de los menús del teléfono
2. Obtenir info
Le da información sobre la tecla de selección de Get It
Now.
Mobile Web
El Mobile Web 2.0 permite acceder a noticias, deportes,
clima
y
correo electrónico desde su dispositivo
1. Presione
2. Presione
,
,
.
Inalámbrico Verizon. Los accesos y selecciones en esta
función dependen de su proveedor de servicios. Para
obtener información concreta sobre el acceso al Get
News & Info mediante su teléfono, comuníquese con su
proveedor de servicios.
.
Administración de sus aplicaciones de Get It Now
Añada aplicaciones nuevas y elimine las antiguas en
cualquier momento.
Acceso y Opciones
Eliminar aplicaciones
1. Oprima la tecla suave izquierda
2. Presione Mobile Web.
3. Seleccione un submenú.
1. Iniciar Browser
Menú.
Sólo eliminar una aplicación la borra completamente de la
memoria del teléfono. Para restaurar una aplicación
después de eliminarla, será necesario que pague y la
descargue de nuevo.
2. Mensajes de Web
3. Alertas Web
1. Entre a Get It Now.
2. Seleccione Configuración.
3. Utilice
presione
para resaltar Gestionar programas, y luego
.
4. Utilice
para resaltar la aplicación que debe borrar,
y leugo presione
.
5. Seleccione Borrar.
50 VX4650
Mobile Web
Desplazamiento
Use para desplazarse por el contenido si la página
1. Iniciar Browser
Le permite iniciar una sesión de Mininavegador.
actual no cabe en una pantalla. El elemento actualmente
seleccionado se indica mediante un cursor en la pantalla.
Acceso directo Para iniciar web browser presione
la tecla de flecha derecha
.
Desplazamiento rápido
1. Presione
,
,
.
Mantenga presionada
cursor hacia arriba y hacia abajo en la pantalla actual.
para mover rápidamente el
2. Después de algunos segundos, usted ve el página de inicio.
Terminar una sesión de Mininavegador
Desplazamiento por página
Termine la sesión del Mininavegador presionando
.
Oprima las Teclas laterales para subir o bajar una página
cada vez.
Uso del navegador
Los elementos en pantalla se pueden presentar de una de
las siguientes formas:
Página de inicio
Para ir a la Página de inicio, mantenga presionada
.
o
G
Opciones numeradas
Puede usar su teclado numérico o puede seleccionar
los elementos moviendo el cursor y presionando las
Teclas suaves correspondientes.
Ver el menú del navegador
Mantenga presionada la tecla ( ) de Marcado por voz
para usar el menú del navegador.
G
Enlaces incrustados en el contenido
Puede actuar sobre las opciones o los vínculos con las
Teclas suaves que están justo abajo de la pantalla.
Teclas suaves
Para ir a distintas pantallas o seleccionar funciones
especiales, use las Teclas suaves. La función asociada
con las Teclas suaves puede cambiar en cada página y
depende de cada elemento resaltado.
G
Texto o números
Puede seleccionar los elementos moviendo el cursos y
presionando las Teclas suaves correspondientes.
VX4650 51
Uso de los menús del teléfono
Tecla suave izquierda
para borrar completamente el campo de entrada.
Inicio de una llamada telefónica desde el Mininavegador
Puede hacer una llamada telefónica desde el
Mininavegador si el sitio que esté usando admite dicha
función (el número de teléfono puede resaltarse y la Tecla
La Tecla suave izquierda
se usa principalmente para
primeras opciones o para seleccionar un elemento, pero
su función puede cambiar según el contenido que se esté
mostrando.
suave izquierda
aparece Call). La conexión del
Tecla suave derecha
navegador se da por terminada al iniciar la llamada.
Después de terminar la llamada, el teléfono vuelve a la
pantalla desde la cual la inició.
La Tecla suave derecha
opciones secundarias o un menú de opciones secundarias.
se usa principalmente para
Introducción de texto, números o símbolos
2. Mensajes de Web
Cuando se le pida que introduzca texto, aparecerá el
método de introducción de texto vigente encima de la
Le permite ver mensajes Web. Si hay mensajes del
navegador, aparece una lista del más nuevo al más
antiguo.
Tecla suave derecha
como Alfa, Símbolo, Número,
Palabra o Inteligente. Para cambiar el modo de entrada,
presione la Tecla suave derecha
carácter en mayúscula, use
. Para crear un
. El método de texto
1. Presione
,
,
.
Aparecerá su lista de mensajes Web.
actual aparece sobre la Tecla suave derecha
como
ALFA, WORD o INTELIGENTE y le permite cambiar la
sensibilidad a las mayúsculas o minúsculas de entrada.
3. Alertas Web
Le permite seleccionar un sonido de aviso del navegador.
Borrado de texto o número introducido
1. Presione
,
,
.
Al introducir texto o números, oprima
último número, letra o símbolo. Mantenga presionada
para borrar el
2. Seleccione una opción de aviso.
Mudo / 2 Bips / 4 Bips
52 VX4650
Media
1. Imágenes
Le permite seleccionar el fondo que se muestra en el
teléfono.
Media
Este menú le permite descargar y usar una amplia
variedad de imágenes, sonidos y otros medios.
1. Presione
,
,
.
2. Use
para seleccionar.
para resaltar su selección y presiones
Acceso y opciones
1. Oprima la tecla suave izquierda
2. Presione Media.
3. Seleccione un submenú.
1. Imágenes
2. Sonido
3. Objetos de mensaje de texto
Menú.
2. Sonido
Le permite elegir los tonos de timbre que se escucharán
para las llamadas entrantes.
1. Presione
,
,
.
2. Use
para resaltar su selección y luego oprima
para seleccionar.
VX4650 53
Uso de los menús del teléfono
3. Objetos de mensaje de texto
Le permite fijar objetos que correspondan a sus mensajes.
Aparato
Las herramientas del teléfono incluyen un Plan, Alarma de
reloj, Memo Vocal, Atajo, Nota, Ez Sugerencia, Calculadora
y Reloj universal.
1. Presione
,
,
.
2. Presione la tecla de número correspondiente o oprima
para seleccionar uno de los siguientes:
G
Pequeña img
Acceso y opciones
G
Grandes img
1. Oprima la tecla suave izquierda
2. Presione Aparato.
Menú.
G
Mis imágenes
3. Seleccione un submenú.
G
Sonidos
1. Plan
G
Mi melodia
2. Alarma de reloj
G
Animaciónes
3. Memo Vocal
4. Atajo
G
Mis animaciónes
3. Use
para resaltar su selección y presione
.
5. NotaSugerencia
6. Calculadora
7. Reloj universal
54 VX4650
Aparato
1. Plan
2. Alarma de reloj
El programador le ayuda a mantener una agenda
conveniente fácil de acceso. Simplemente almacena las
horas progromadas y el alerta de programador le hace
saber cuando llega la hora. Puede también aprovechar las
funciones de Alarma de reloj.
Le permite fijar una de cuatro alarmas. La hora actual se
muestra en la parte superior de la pantalla cuando
selecciona fijar una alarma. A la hora de la alarma,
aparecerá Alarma1 (o 2 o 3, según sea el caso) en la
pantalla de cristal líquido y sonará la alarma.
1. Pre.sione
,
,
.
1. Presione
2. Use
,
,
.
2. Seleccione la alarma que desea modificar:
para resaltar el día programado.
Alarma 1 /
Alarma rápida
Alarma 2 /
Alarma 3 /
Mover el cursor a la izquierdu.
Mover el cursor a la derecha.
Mover la semana hacia atrás.
Mover la semana hacia adelante.
3. Use
para resaltar la hora de la alarma y oprima
.
4. Fije la hora de la alarma y oprima
.
3. Oprima la tecla suave izquierda
Agregar.
5. Use
para resaltar Una vez (configuración
4. Introduzca la información de su calendario incluyendo:
recurrente) y oprima
.
G
G
G
G
G
G
Fecha
Voz
Hora
Título o información
G
Suceso recurrente
6. Presione
para seleccionar una de las siguientes:
Cuándo hacer sonar la alarma de recordatorio
Qué timbre de alarma hacer sonar
Una vez / Diario / Lun - Vie / Fines De Semana
7. Use para resaltar Timbre (configuración de tipo de
timbre) y oprima
5. Oprima la tecla suave izquierda
Guardar.
.
NOTA Siel SMS se está enviando durante una llamada o el
acceso UP se esta conectando en la hora
establecida, no suena en este momento sino suena
despues de salir.
8. Use
para seleccionar uno de los tipos de timbre
de alarma disponibles y oprima
.
9. Oprima la Tecla suave izquierda
Guardar.
VX4650 55
Uso de los menús del teléfono
3. Memo Vocal
4. Atajo
Se puede escuhar, agregar, editar y borrar avisos verbales
cortos a sí mismo.
Le permite establecer un acceso directo a sus Lista Llam,
Contactos, Aparato
navegación Arriba.
o
Ambiente con la Tecla de
1. Presione
,
,
.
1. Presione
,
,
.
2. Oprima la tecla suave izquierda
un nuevo memo vocal.
Nuevo para grabar
Aparece un mensaje explicativo.
2. Presione para continuar.
3. Seleccione el atajo que desea establecer (oprima o
resalte el número correspondiente y oprima ).
3. Hable al micrófono y luego oprima la tecla suave
izquierda Termin. o . El título predeterminado del
memorándum es la fecha y hora de la grabación.
4. Manteniendo resaltada la grabación, oprima la Tecla
suave derecha Opciones para acceder a lo siguiente:
5. Nota
G
G
G
G
G
Modificar título
Fijar
Inf sobre memoria
Borrar
Le permite leer, agregar, modificar y borrar notas que haya
escrito para usted mismo.
Borrar todo
1. Presione
,
,
.
2. Presione la Tecla suave izquierda
escribir una nota nueva.
Agregar para
Para reproducir un Memo Vocal
1. Acceda a Memo Vocal, resalte el Memo Vocal que
desea escuchar y oprima
3. Escriba la nota y oprima
.
.
Aparece brevemente un mensaje de confirmación y
luego se muestra su lista de notas.
2. Presione la Tecla suave izquierda
Escu.
56 VX4650
Aparato
Ver una entrada de la Libreta de notas
. Acceda a la Libreta de notas y resalte la entrada.
7. Calculadora
1
Le permite hacer cálculos matemáticos sencillos. Puede
introducir números de hasta dos decimales.
2. Para borrar, oprima la Tecla suave derecha
Opciones.
1. Presione
,
,
.
G
Borrar
Borrar todo
G
Use el teclado para introducir números.
G
G
G
Use
para introducir decimales.
Para corregir, resalte la entrada, luego oprima
y oprima la Tecla suave izquierda
Use
para introducir un cambio de más o
Modific..
menos.
G
G
G
G
Oprima la tecla suave izquierda para borrar la
entrada.
6. Ez Sugerencia
Le permite calcular rápida y fácilmente el importe de una
nota usando como variables con la cantidad de la nota, la
propina y el número de comensales.
Oprima la tecla suave derecha para introducir
operadores algebraicos.
Use la tecla de navegación para introducir
operadores.
1. Presione
,
,
.
Oprima
para completar la ecuación.
NOTA Se pueden hacer cálculos con hasta 29 caracteres
de una vez (p. ej., 63+78-21 serían 8 caracteres).
VX4650 57
Uso de los menús del teléfono
8. Reloj universal
Le permite determinar la hora actual en otro huso horario
o en otro país.
Ambiente
El menú de Ambiente tiene opciones para personalizar el
teléfono.
1. Presione
,
,
.
2. Presione la Tecla suave derecha
Ciudads para
Acceso y opciones
mover la barra del tiempo a través del mapa del mundo
y para exhibir el fecha/hora en esa localización
1. Oprima la tecla suave izquierda
2. Presione Ambiente.
3. Seleccione un submenú.
1. Sonidos
Menú.
NOTA Oprima la tecla suave izquierda
mostrar el Horario de verano en la ubicación
seleccionada.
Fije DST para
2. Mostrar
3. Sistema
4. Seguridad
5. Funciones
6. Configuración de datos
7. Lugar
8. Info de tel
58 VX4650
Ambiente
1.3 Volumen
1. Sonidos
Le permite configurar varios valores de volumen.
1. Presione
Opciones para personalizar los sonidos del teléfono.
,
,
,
.
1.1 Timbres
2. Seleccione Timbre / Audífono / Timbre tecla / Manos
libres.
Configura tonos para distintos tipos de llamadas entrantes.
1. Presione
,
,
,
.
3. Use
después presione
guardar la configuración.
para ajuste el volumen del timbre con y
después presione para
2. Seleccione ID de llamador / Sin ID de llamador /
Restringir.
3. Use
para seleccionar un timbre y luego oprima
para guardar el sonido.
1.4 Alerta de mensaje
Le permite seleccionar el tipo de aviso para un mensaje
nuevo.
NOTA Se pueden descargar timbres (Tonos de timbre)
adicionales visitando www.vtext.com.
1. Presione
,
,
,
.
2. Seleccione Correo de voz / Texto de mensaje / Correo
electrónico / Mensaje de localizador / Aviso de 2-Min.
1.2 Tonalidad tecla
Le permite seleccionar el tipo de Tono de tecla.
3. Configure su selección con
y luego oprima
.
1. Presione
,
,
,
.
2. Seleccione Timbre / Inglés / Español y luego oprima
.
1.5 Servicio Alertas
Timbre
Inglés
Emite un pitido al oprimir las teclas.
Emite una voz(en Inglés), al oprimir las teclas.
Le permite configurar como Encendido o Apagado
cualquiera de las cuatro opciones de Aviso.
Español Emite una voz(en Español) al oprimir las
teclas.
1. Presione
,
,
,
.
VX4650 59
Uso de los menús del teléfono
2. Seleccione una opción de aviso.
1.6 Tono de activación/desactivación
Le permite configurar el teléfono para que haga sonar un tono
cuando se enciende, cuando se apaga o en ambos casos.
1.5.1 Cambiar de servicio
Le avisa cuando cambia el servicio. Al entrar a un área
de servicio, el teléfono muestra el mensaje Entrando al
área de servicio. Al salir de un área de servicio, el
teléfono muestra el mensaje Saliendo del área de servicio.
.
,
,
1. Presione
2. Configure Encendido / Apagado con
oprima
,
y luego
.
1.5.2 ERI Sonidos
1.7 Tono de DTMF
Le informa del estado del servicio celular.
Le permite configurar la longitud del Tono de teclas y la
velocidad de reproducción de los tonos de teclas.
1.5.3 Señal sonora de un minuto
1. Presione
,
,
,
.
Le avisa 10 segundos antes del final de cada minuto
durante una llamada.
2. Seleccione cualquiera de los siguientes y luego
oprima
.
1.5.4 Llamadas conexión
Normal Emite un tono durante un tiempo determinado,
incluso si usted mantiene presionada la tecla.
Le avisa cuando la llamada se ha conectado.
Largo
Emite un tono continuo durante todo el tiempo
en que usted mantenga oprimida la tecla.
1.5.5 Volver al principio
Le avisa cuando se desplaza más allá del final de una
lista de menús.
NOTA Frecuencia múltiple de tono dual (DTMF) Señales
mediante la transmisión simultánea de dos tonos,
uno de un grupo de frecuencias bajas y otro de un
grupo de frecuencias altas. Cada grupo consta de
cuatro frecuencias. Si configura la longitud del tono
de teclas en Largo se ampliará el tono DTMF.
3. Configure Encendido / Apagado con
y luego
oprima
.
60 VX4650
Ambiente
2.2.2 Temporizador de luz de tecla
1. Press
2. Mostrar
Opciones para personalizar la pantalla del teléfono.
,
,
,
,
.
2. Elija una configuración y presione
.
2.1 Pendon
Le permite introducir una cadena de hasta 16 caracteres
que se muestran en la pantalla de cristal líquido.
2.3 Pantallas
Le permite seleccionar el tipo de fondo que se muestra en
el teléfono.
,
,
1. Presione
,
.
2. Introduzca el texto de la pancarta y presione
.
1. Presione
,
,
,
.
2. Seleccione Fondo / Encendido / Apagado.
2.2 Iluminación de fondo
Le permite fijar la duración de iluminación de la luz trasera.
La pantalla de cristal líquido principal, la pantalla de cristal
líquido delantera y la luz de las teclas se configuran
independientemente.
3. Seleccione entre las distintas pantallas y oprima
.
4. Oprima la Tecla suave izquierda
Guardar.
NOTA Oprima la tecla suave derecha
Más para ver
NOTA Si se fija una cantidad de tiempo para la opción de
reloj, el tiempo se empieza a contar después de que
se oprime la última tecla.
más opciones de imagen.
2.4 Estilo del menú
Le permite elegir si desea que el menú se muestre como
lista o como iconos.
2.2.1 LCD
1. Presione
,
,
,
.
1. Presione
2. Elija un submenú de Luz trasera y presione
Temporizador / Brillo
,
,
,
,
.
2. Seleccione Iconos o Lista y oprima
.
.
VX4650 61
Uso de los menús del teléfono
2.5 Relojes
2.8 Fuente
Le permi.te seleccionar el tipo de reloj que se muestra en
el teléfono.
Le permite fijar el tamaño y color de la fuente.
2.8.1 Dígitos de llamada
1. Presione
,
,
,
.
1. Elija un submenú.
2. Seleccione Normal / Analógico / Digital y oprima
.
G
Tamaño o
Color.
3. Oprima la Tecla suave izquierda
Guardar.
2. Presione
o color que desea y entonces oprima
guardarlo.
hasta que encuentre el tamaño
2.6 Colores de tema
para
Le permite elegir el color de la pantalla de fondo.
1. Presione
2. Seleccione Implícito / Verde / Violado / Anaranjao y
,
,
,
.
2.8.2 Editor de texto
1. Elija un submenú.
oprima
.
G
Tamaño o
Color.
2.7 Contraste
2. Presione
hasta que encuentre el tamaño
o color que desea y entonces oprima
guardarlo.
para
Le permite establecer el nivel de contraste de su pantalla
de cristal líquido.
1. Presione
2. Elija un submenú de Contraste y presione
LCD principal / LCD delantero
para ajustar el nivel del contraste y oprima
,
.
.
3. Use
.
62 VX4650
Ambiente
2.9 Idioma
3. Sistema
Le permite configurar la función bilingüe según su
preferencia. Elija entre inglés y español.
El menú Sistema le permite designar configuraciones
específicas de red del sistema.
1. Presione
,
,
,
.
3.1 Seleccione Sistema
2. Configure Inglés / Español con
y luego oprima
Le permite configurar el entorno de administración del
productor del teléfono. Deje esta configuración como
predeterminada a menos que desee alterar la selección
del sistema como se lo haya indicado su proveedor de
servicio.
.
2.0 Poder-Salvo
Cuando el teléfono esté en un área sin sevicio, deja de
buscar servicio y entra en modo de AHORRO DE ENERGÍA.
1. Presione
,
,
,
.
1. Presione
,
,
,
.
2. Seleccionar Sólo Base / Automático y presione
.
2. Selecionar una opcíon presione la tecla
.
G
G
G
G
3.2 Fijar NAM
2 minutos
10 minutos
Apagada
30 minutos
Le permite seleccionar el NAM (Módulo de asignación de
número) del teléfono si éste está registrado con varios
proveedores de servicio.
2. Estado de Luz
*
La posición de su teléfono.
1. Presione
,
,
,
.
1. Presione
,
,
,
.
2. Seleccionar NAM1 / NAM2 y presione
.
2. Seleccione Encendido / Apagado con
y presione
.
VX4650 63
Uso de los menús del teléfono
3.3 Auto NAM
4. Seguridad
Permite que el teléfono cambie automáticamente entre
números telefónicos programados que correspondan al
área del proveedor de servicio.
El menú de Seguridad le permite asegurar electrónicamente
el teléfono.
4.1 Bloq. Teléfono
1. Presione
,
,
,
.
Evita el uso no autorizado del teléfono. Una vez bloqueado,
el teléfono queda en modo restringido hasta que se
introduzca el código de bloqueo. Puede recibir llamadas y
seguir haciendo llamadas de emergencia. Puede
modificar el código de bloqueo con el código Bloqueo
nuevo en el menú Seguridad.
2. Seleccione Encendido / Apagado y presione
.
3.4 Sist. de servicio
Identifica el número de canal de un sistema atendido y un
número SID. Esta información es sólo para asistencia
técnica.
1. Presione
,
,
.
1. Presione
,
,
,
.
2. Introduzca el código de bloqueo de cuatro dígitos. El
código de bloqueo son habitualmente las 4 últimas
cifras de su número de teléfono.
3. Presione
Bloq. Teléfono.
4. Seleccione una opción y oprima
.
Desbloq
Bloq.
El teléfono nunca está bloqueado (se puede
usar el modo de Bloqueo).
El teléfono siempre está. Al estar bloqueado,
puede recibir llamadas entrantes o hacer
sólo llamadas de emergencia.
64 VX4650
Ambiente
Al encender el El teléfono está bloqueado al
4. Seleccione el número de emergencia con
presione
y luego
teléfono
encenderse.
.
4.2 Llamada Restringidas
5. Introduzca un número telefónico de emergencia y luego
presione
.
Le permite restringir las llamadas que se hacen. Si
configura esta función como Encendido, sólo puede hacer
4.4 Cambiar Bloquear
llamadas
a
números de emergencia
y
números
Le permite introducir un nuevo código de bloqueo de
cuatro dígitos.
almacenados en sus Contactos. En modo restringido
podrá seguir recibiendo llamadas.
1. Presione
2. Introduzca el código de bloqueo de cuatro dígitos.
3. Presione Cambiar Bloquear.
,
,
.
1. Presione
2. Introduzca el código de bloqueo de cuatro dígitos.
3. Presione Llamada Restringidas.
,
,
.
4. Introduzca un código de bloqueo de cuatro cifras.
4. Seleccione Encendido / Apagado y presione
.
5. Introduzca el nuevo código de bloqueo otra vez para
confirmar la entrada original.
4.3 Emergencia #s
Le permite introducir 3 números de emergencia. Podrá
llamar a estos números de emergencia y al 911 incluso si
el teléfono está bloqueado o restringido.
4.5 Borrar Contactos
Le permite borrar todos sus Contactos de una sola vez.
1. Presione
2. Introduzca el código de bloqueo de cuatro dígitos.
3. Presione Emergencia #s.
,
,
.
1. Presione
2. Introduzca el código de bloqueo de cuatro dígitos.
3. Presione Borrar Contactos.
,
,
.
VX4650 65
Uso de los menús del teléfono
2. Seleccione Desactivado / Cada 10 segundos / Cada 30
4. Seleccione Borrar todos los #s y presione
.
segundos / Cada 60 segundos y oprima
.
4.6 Restablecer Implícito
5.2 Respuesta de llamada
Le permite restaurar su teléfono
predeterminados de fábrica.
a
los valores
Le permite determinar cómo iniciar una llamada
contestada.
1. Presione
,
,
.
1. Presione
2. Seleccione Abrir / Cualquier tecla / Sólo SEND y
oprima
,
,
,
.
2. Introduzca el código de bloqueo de cuatro dígitos.
3. Presione
4. Presione
5. Presione
Restablecer Implícito.
.
.
5.3 Auto Respuesta automát
Revertir.
Le permite seleccionar el número de timbrazos antes de
que el teléfono responda automáticamente una llamada.
Esta función tiene por objeto usarse con dispositivos de
manos libres, pero es una función independiente del
teléfono y debe activarse o desactivarse manualmente
cuando se conecte o desconecte del dispositivo.
5. Funciones
El menú de Configuración de llamadas le permite decidir
cómo maneja el teléfono las llamadas de entrada y de
salida.
1. Presione
,
,
,
.
5.1 Reintento automático
2. Seleccione una opción y oprima
.
Le permite fijar el tiempo que el teléfono esperará antes de
remarcar automáticamente un número cuando no se
consiga una llamada que se intentó.
G
Apagada
G
Después 5 segundos Cuando tenga una llamada
entrante, el teléfono responde automáticamente
después de 5 segundos, esté abierto.
1. Presione
,
,
,
.
66 VX4650
Ambiente
5.4 Marcaciones de un toque
5.6 Auto Volumen
Le permite iniciar un marcado rápido presionando y
manteniendo presionado el número de marcado rápido. Si
se fija en Inhabilitado, los números de Marcado rápido
designados en sus Contactos no funcionarán.
Proporciona una mejor experiencia de audio habilitando la
función de Volumen automático para controlar el rango
dinámico y el volumen de la voz que se envía y recibe por
distintos niveles de altavoces y entornos.
1. Presione
,
,
,
.
1. Presione
,
,
,
.
2. Seleccione Habilitar / Inhabilitado y oprima
.
2. Seleccione Encendido / Apadado y oprima
.
5.5 Privacidad de voz
5.7 Modalidad TTY
Le permite configurar la función de privacidad de voz para
las llamadas CDMA como Mejorada o Estándar. CDMA
ofrece una privacidad de voz inherente. Pregunte sobre su
disponibilidad con su proveedor de servicios.
Le permite conectar un dispositivo TTY (teclado para
personas con problemas de audición) para comunicarse
con personas que también lo usen. Un teléfono con
compatibilidad TTY puede traducir caracteres escritos a
voz. La voz también puede traducirse en caracteres y
mostrarse en el TTY.
1. Presione
,
,
,
.
2. Seleccione Mejorado / Normal y oprima
.
1. Presione
2. Presione
,
,
,
.
.
3. Seleccione TTY Llena / TTY + Charla / TTY + Oír /
TTY Apagada y oprima
.
VX4650 67
Uso de los menús del teléfono
6.2 Conexión al PC
6. Configuración de datos
Le permite seleccionar el puerto de datos.
Este menú le permite usar servicios de comunicación de
datos inalámbricos. Los servicios de comunicación de
1. Presione
2. Seleccione USB / RS-232C(COM Port) / Agremiado y
oprima
,
,
,
.
datos inalámbricos se refieren
a
la utilización de
terminales de suscriptor para entrar a Internet con
computadoras personales o portátiles a 19.2 Kbps o a un
máximo de 230.4 Kbps. La velocidad de conexión depende
de la red de su empresa de teléfonos y de otras variables.
Las especificaciones de información de comunicación de
contacto deben coincidir con las de la red.
.
NOTA Al usar el servicio de datos 1X HSPD mediante un
cable de datos RS-232C, la velocidad del puerto se
fija en 115,200 (no se admite 230,400). Al usar el
servicio de datos 1X HSPD mediante un cable de
datos USB, puede obtener mejor velocidad del puerto
si fija dicha velocidad en 230,400 y no en 115,200.
6.1 Datos/Fax
Le permite usar su teléfono para transmitir datos y faxes. .
1. Presione
2. Seleccione Apagado / Fax-En. una vez / Fax-En.
siempre / Datos-En. una vez/Datos-En. siempre
oprima
,
,
,
.
y
.
NOTA El Kit de conexión de datos le permite conectar su
PC o PDA a su teléfono inalámbrico LG, liberándolo
de tener que encontrar un teléfono. Puede enviar o
recibir un correo electrónico, un fax o entrar a
Internet en todo momento y lugar.
68 VX4650
Ambiente
7. Lugar
8. Info de tel
Menú para modo GPS(Sistema de posicionamiento global:
sistema de infomación de ubicación asistido por satélite).
El menú Información del teléfono le da información
concreta respecto al modelo del teléfono.
1. Presione
,
,
.
8.1 Mi # de tel
2. Seleccione Ubicación activada / Sólo E911 y oprima
Le permite ver su número de teléfono.
.
1. Presione
,
,
,
.
NOTA Las señales de satélite GPS no siempre se
transmiten, especialmente si hay malas condiciones
atmosféricas o ambientales, bajo techo y en otros
casos.
8.2 S/W Versión
Le permite ver la versión del software, PRL, ERI y
navegador.
1. Presione
,
,
,
.
8.3 Glosario de iconos
Le permite ver todos los iconos y sus significados.
1. Presione
,
,
,
.
8.4 Ayuda de acceso directo
Le permite ver información resumida sobre el uso del
teléfono.
segur
1. Presione
,
,
,
.
VX4650 69
Seguridad
Por ejemplo, más de 120 científicos, ingenieros y médicos
de universidades, dependencias gubernamentales de
salud y de la industria revisaron las investigaciones
realizadas para desarrollar el estándar ANSI (C95.1).
El diseño de su teléfono cumple los lineamientos de la FCC
(y esas normas internacionales).
Información de seguridad de la TIA
Lo que sigue es la Información completa de seguridad de la
TIA (Asociación de la industria de las telecomunicaciones)
sobre teléfonos inalámbricos de mano.
Exposición a las señales de radiofrecuencia
Su teléfono celular de mano inalámbrico es un transmisor
y receptor de radio de baja potencia. Cuando está
Cuidado de la antena
Utilice solamente la antena incluida o una antena de
reemplazo aprobada. Las antenas, modificaciones o
accesorios no autorizados pueden dañar el teléfono y
violar los reglamentos de la FCC.
encendido, recibe
radiofrecuencia (RF).
y
también envía señales de
En agosto de 1996, la Comisión Federal de Comunicaciones
(FCC) de EE.UU. adoptó lineamientos de exposición a RF
con niveles de seguridad para teléfonos inalámbricos de
mano. Esos lineamientos corresponden a la norma de
seguridad establecida previamente por organismos de
estándares tanto de EE.UU. como internacionales:
ANSI C95.1 (1992) *
Funcionamiento del teléfono
POSICIÓN NORMAL: Sostenga el teléfono como cualquier
otro teléfono con la antena apuntando hacia arriba por
sobre su hombro.
NCRP Report 86 (1986)
ICNIRP (1996)
Sugerencias para un funcionamiento más eficiente
Para que su teléfono funcione con la máxima eficiencia:
No toque la antena innecesariamente cuando esté usando
el teléfono. El contacto con la antena afecta la calidad de la
llamada y puede ocasionar que el teléfono funcione a un
nivel de potencia mayor que el que necesitaría de otro modo.
Instituto de estándares nacional estadounidense, Consejo
nacional de protección contra la radiación y mediciones,
Comisión internacional de protección de radiación no
ionizante Estos estándares se basaron en evaluaciones
amplias y periódicas de la literatura científica relevante.
70 VX4650
posible interferencia con éste. Estas recomendaciones
son coherentes con las investigaciones independientes y
las recomendaciones de Investigación en tecnología
inalámbrica.
Manejo
Compruebe las leyes y reglamentos referidos al uso de
teléfonos inalámbricos en las áreas donde usted maneja y
cúmplalas siempre. Igualmente, si va a usar el teléfono
mientras maneja, por favor tenga presente lo siguiente:
Las personas con marcapasos:
G
Deben SIEMPRE mantener el teléfono a más de quince
G
Preste toda su atención a conducir: manejar con
centímetros (seis pulgadas) del marcapasos cuando el
teléfono esté encendido;
seguridad es su primera responsabilidad;
G
Use la operación a manos libres, si la tiene;
G
No deben llevar el teléfono en un bolsillo del pecho.
G
Salga del camino y estaciónese antes de hacer o recibir
G
Deben usar la oreja opuesta al marcapasos para
una llamada si las condiciones de manejo o la ley así lo
demandan.
reducir al mínimo la posibilidad de interferencia.
G
Deben apagar el teléfono de inmediato si tienen motivo
Dispositivos electrónicos
para sospechar que está ocurriendo una interferencia.
La mayoría del equipo electrónico moderno está blindado
contra las señales de RF. Sin embargo, algunos equipos
electrónicos pueden no estar blindados contra las señales
de RF de su teléfono inalámbrico.
Aparatos para la sordera
Algunos teléfonos inalámbricos digitales pueden interferir
con algunos aparatos para la sordera. En caso de
presentarse tal interferencia, es recomendable que
consulte con su proveedor de servicio (o llame a la línea
de servicio al cliente para comentar las opciones a su
alcance). Opcional para cada fabricante de teléfonos.
Marcapasos
La Asociación de fabricantes de la industria médica
recomienda una separación mínima de quince (15)
centímetros
o
seis (6) pulgadas entre el teléfono
inalámbrico de mano y un marcapasos para evitar la
VX4650 71
VX4650 71
Seguridad
Otros dispositivos médicos
Aeronaves
Si usa cualquier otro dispositivo médico personal,
consulte al fabricante de dicho dispositivo para saber si
está adecuadamente blindado contra la energía de RF
externa. Su médico puede ayudarle a obtener esta
información.
Los reglamentos de la FCC prohíben el uso del teléfono en
el aire. Apague el teléfono antes de abordar una aeronave.
Áreas de explosivos
Para evitar la interferencia en zonas donde se realicen
explosiones, apague el teléfono cuando esté en estos
sitios o en áreas con letreros que indiquen: “Apague los
radios de dos vías”. Obedezca todos los letreros e
instrucciones.
Centros de atención médica
Apague el teléfono cuando esté en instalaciones de
atención médica en las que haya letreros que así lo
indiquen. Los hospitales o las instalaciones de atención
médica pueden emplear equipos que podrían ser sensible
a la energía de RF externa.
Atmósfera potencialmente explosiva
Apague el teléfono cuando esté en un área con una
atmósfera potencialmente explosiva y obedezca todos los
letreros e instrucciones. Las chispas en dichas áreas
pueden causar una explosión o un incendio que den como
resultado lesiones personales o incluso la muerte. Las
áreas con una atmósfera potencialmente explosiva están
claramente marcadas con frecuencia, pero no siempre.
Entre las áreas potenciales tenemos: las áreas de
abastecimiento de combustible (como las gasolineras),
bajo cubierta en barcos, instalaciones de almacenamiento
o transferencia de combustible o sustancias químicas,
vehículos que usen gas de petróleo licuado (como
Vehículos
Las señales de RF pueden afectar a los sistemas
electrónicos mal instalados o blindados de manera
inadecuada en los vehículos automotores. Pregunte al
fabricante o a su representante respecto de su vehículo.
También debe consultar al fabricante de cualquier equipo
que haya añadido a su vehículo.
Instalaciones con letreros
Apague el teléfono en cualquier instalación donde así lo
exijan los letreros de aviso.
72 VX4650
propano o butano), áreas en las que el aire contenga
sustancias químicas o partículas (como granos, polvo o
Información de seguridad
Lea y atienda la información siguiente para el uso seguro
y adecuado de su teléfono y para evitar cualquier daño.
Igualmente, mantenga la guía del usuario en un sitio
accesible en todo momento después de leerla.
No seguir las instrucciones puede
polvo metálico)
normalmente sería recomendable que apagara el motor
de su vehículo.
y
cualquier otra área en la que
Para vehículos equipados con bolsas de aire
ocasionar daños leves o graves al
producto.
Una bolsa de aire se infla con gran fuerza. NO coloque
objetos, incluido el equipo inalámbrico, ya sea instalado o
portátil, en el área que está sobre la bolsa de aire o en el
área donde se despliega. Si el equipo inalámbrico del
interior del vehículo está mal instalado y se infla la bolsa
de aire, pueden producirse graves lesiones.
Seguridad del cargador y del adaptador
G
El cargador y el adaptador stán diseñados sólo para
ser usados bajo techo.
Información y cuidado de la batería
G
Deshágase de la batería correctamente o llévela con su
proveedor de servicios inalábricos para que sea
reciclada.
G
La batería no necesita estar totalmente descargada
para cargarse.
G
Use únicamente cargadores aprobados por LG que sean
específicamente para el modelo de su teléfono, ya que
están diseñados para maximizar la vida útil de la batería.
VX4650 73
Seguridad
G
G
G
G
G
G
No desarme la batería ni le provoque un corto circuito.
Mantenga limpios los contactos de metal de la batería.
Desconecte el cable de alimentación antes de limpiar el
teléfono, y limpie la clavija de alimentación cuando esté
sucia.
Al usar la clavija de alimentación, asegúrese de que
esté conectada firmemente. En caso contrario, puede
provocar calor excesivo o incendio.
Si coloca el teléfono en un bolsillo o bolso sin cubrir el
receptáculo (clavija de alimentación), los artículos
metálicos (tales como una moneda, clip o pluma)
pueden provocarle un corto circuito al teléfono.
Siembre cubra el receptáculo cuando no se esté
usando.
No le provoque un corto circuito a la batería. Los
artículos metálicos como monedas, clips o plumas en el
bolsillo o bolso pueden provocar al moverse un
cortocircuito en los terminales + y – de la batería (las
tiras de metal de la batería). El cortocircuito de los
terminales puede dañar la batería y ocasionar una
explosión.
Reemplace la batería cuando ya no tenga un
desempeño aceptable. La batería puede recargarse
varios cientos de veces antes de necesitar ser
reemplazada.
G
G
G
Cargue la batería después de períodos prolongados sin
usar el teléfono para maximizar la vida útil de la misma.
La vida útil de la batería será distinta en función de los
patrones de uso y las condiciones medioambientales.
G
El uso extendido de la luz de fondo, del mininavegador y
de los kits de conectividad de datos afectan la vida útil
de la batería y los tiempos de conversación y espera.
G
La función de autoprotección de la interrumpe la
alimentación del teléfono cuando su operación esté en
un estado anormal. En este caso, extraiga la batería del
teléfono, vuelva a instalarla y encienda el teléfono.
Aviso general
Peligros de explosión, descargas eléctricas e incendio
G
El uso de una batería dañada o el introducir la batería
en la boca pueden causar gravs lesiones.
G
No coloque el teléfono en sitios espuestos a exceso de
polvo y mantenga la distancia mínima requerida entre el
cable de alimentación y las fuentes de calor.
74 VX4650
G
G
No coloque cerca del teléfono artículos que contengan
componentes magnéticos como serían tarjetas de
crédito, tarjetas telefónicas, libretas de banco o boletos
del metro. El magnetismo del teléfono puede dañar los
datos almacenados en la tira magnética.
El cable de alimentación de este producto lo expondrá
al plomo, una sustancia química que el Estado de
California ha determinado que causa (cáncer), defectos
congénitos y otros daños reproductores. Lávese las
manos después de manipularlo.
G
G
G
G
G
G
Hablar por el teléfono durante un período de tiempo
prolongado puede reducir la calidad de la llamada
debido al calor generado durante la utilización.
No pinte el teléfono.
Los datos guardados en el teléfono se pueden borrar
debido a un uso descuidado, reparación del teléfono o
actualización del software. Por favor respalde sus
números de teléfono importantes. (También podrían
borrarse los tonos de timbre, mensajes de texto,
mensajes de voz, imágenes y videos.) El fabricante no
es responsable de daños debidos a la pérdida de datos.
Cuando el teléfono no se use durante mucho tiempo,
almacénelo en un lugar seguro con el cable de
alimentación desconectado.
El uso del teléfono cerca de equipo receptor (como un
televisor o radio) puede causar interferencia el
teléfono.
G
G
Al usar el teléfono en lugares públicos, fije el tono de
timbre en vibración para no molestar a otras personas.
No use el teléfono si la antena está dañada. Si una
antena dañada toca la piel, puede causar una ligera
quemadura. Comuníquese con un Centro de servicio
autorizado LG para que reemplacen la antena dañada.
No apague o encienda el teléfono cuando se lo ponga
al oído.
G
No sumerja el teléfono en agua. Si esto ocurre,
apáguelo de inmediato y extraiga la batería. Si el
teléfono no funciona, llévelo a un Centro de servicio
autorizado LG.
VX4650 75
Seguridad
pero tales conclusiones no se han visto confirmadas por
investigaciones adicionales. En algunos casos, los
investigadores han tenido dificultades en reproducir tales
estudios o en determinar el motivo de las inconsistencias
en los resultados.
Actualización de la FDA para los consumidores
Actualización para consumidores sobre
teléfonos móviles del Centro de dispositivos
y salud radiológica de la Administración de
alimentos y medicamentos de EE.UU.:
2. ¿Cuál es el papel de la FDA en cuanto a que los
teléfonos inalámbricos sean seguros?
1. ¿Representan un riesgo para la salud los teléfonos
inalámbricos?
Según las leyes, la FDA no comprueba la seguridad de los
productos para el consumidor que emitan radiación antes
de que puedan venderse, como sí lo hace con los nuevos
medicamentos o dispositivos médicos. No obstante, la
agencia tiene autoridad para emprender acciones si se
demuestra que los teléfonos inalámbricos emiten energía
de radiofrecuencia (RF) a un nivel que sea peligroso para
el usuario. En tal caso, la FDA podría exigir a los
fabricantes de teléfonos inalámbricos que informaran a
los usuarios del riesgo para la salud y reparar, reemplazar
o sacar del mercado los teléfonos de modo que deje de
existir el riesgo.
La evidencia científica disponible no muestra que haya
ningún problema de salud asociado con el uso de
teléfonos inalámbricos. Sin embargo, no hay pruebas de
que los teléfonos inalámbricos sean totalmente seguros.
Los teléfonos inalámbricos emiten bajos niveles de
energía de radiofrecuencia (RF) en el rango de
microondas cuando se usan. También emiten muy bajos
niveles de RF cuando están en modo de espera. Mientras
que altos niveles de RF pueden producir efectos en la
salud (calentando los tejidos), la exposición a RF de bajo
nivel no produce efectos de calentamiento y no causa
efectos conocidos adversos para la salud. Muchos
estudios sobre la exposición a RF de bajo nivel no han
encontrado ningún efecto biológico. Algunos estudios han
sugerido que puede haber algunos efectos biológicos,
Aunque los datos científicos existentes no justifican que la
FDA emprenda acciones reglamentarias, la agencia ha
instado a la industria de los teléfonos inalámbricos para
que dé determinados pasos, entre ellos los siguientes:
76 VX4650
G
G
G
G
Apoyar la investigación necesaria sobre los posibles
efectos biológicos de las radiofrecuencias del tipo que
emiten los teléfonos inalámbricos,
National Telecommunications and Information
Administration (Administración nacional de
telecomunicaciones e información)
El National Institutes of Health también participa en
algunas actividades del grupo de trabajo interinstitucional.
La FDA comparte las responsabilidades reglamentarias
sobre los teléfonos inalámbricos con la Comisión federal
de comunicaciones (FCC). Todos los teléfonos que se
venden en EE.UU. deben cumplir con los lineamientos de
Diseñar teléfonos inalámbricos de tal modo que se
minimice la exposición del usuario a RF que no sea
necesaria para la función del dispositivo y
Cooperar para dar
a
los usuarios de teléfonos
inalámbricos la mejor información sobre los posibles
efectos del uso de los teléfonos inalámbricos sobre la
salud humana.
seguridad de la FCC que limitan la exposición
a
radiofrecuencias. La FCC depende de la FDA y de otras
instituciones de salud para las cuestiones de seguridad de
los teléfonos inalámbricos. La FCC también regula las
estaciones de base de las cuales dependen los teléfonos
inalámbricos. Mientras que estas estaciones de base
funcionan a una potencia mayor que los teléfonos
inalámbricos mismos, la exposición a RF que recibe la
gente de estas estaciones de base es habitualmente miles
de veces menor de la que pueden tener procedente de los
teléfonos inalámbricos. Las estaciones de base, por tanto
no están sujetas a las cuestiones de seguridad que se
analizan en este documento.
La FDA pertenece a un grupo de trabajo interinstitucional
de dependencias federales que tienen responsabilidad en
distintos aspectos de la seguridad de la RF para garantizar
la coordinación de esfuerzos
a
nivel federal. Las
siguientes instituciones pertenecen a este grupo de
trabajo:
G
National Institute for Occupational Safety and Health
(Instituto nacional para la seguridad y salud laborales)
G
Environmental Protection Agency (Agencia de
protección medioambiental)
G
Occupational Safety and Health Administration
(Administración de la seguridad y salud laborales)
VX4650 77
Seguridad
3. ¿Qué tipos de teléfonos son el tema de esta
actualización?
4. ¿Cuáles son los resultados de la investigación que ya
se ha realizado?
El término “teléfonos inalámbricos” se refiere a los
teléfonos inalámbricos de mano con antenas
interconstruidas, con frecuencia llamados teléfonos
“celulares”, “móviles” o “PCS”. Estos tipos de teléfonos
inalámbricos pueden exponer al usuario a una energía de
radiofrecuencia (RF) mensurable debido a la corta
distancia entre el teléfono y la cabeza del usuario. Estas
exposiciones a RF están limitadas por los lineamientos de
seguridad de la FCC que se desarrollaron con indicaciones
de la FDA y otras dependencias federales de salud y
seguridad. Cuando el teléfono se encuentra a distancias
mayores del usuario, la exposición a RF es drásticamente
menor, porque la exposición a RF de una persona
disminuye rápidamente al incrementarse la distancia de la
fuente. Los así llamados "teléfonos inalámbricos" que
tienen una unidad de base conectada al cableado
telefónico de una casa habitualmente funcionan a niveles
de potencia mucho menores y por tanto producen
exposiciones a RF que están muy por debajo de los límites
de seguridad de la FCC.
La investigación realizada hasta la fecha ha producido
resultados contradictorios y muchos estudios han sufrido
de fallas en sus métodos de investigación. Los
experimentos con animales que investigan los efectos de
la exposición a las energías de radiofrecuencia (RF)
características de los teléfonos inalámbricos han
producido resultados contradictorios que con frecuencia
no pueden repetirse en otros laboratorios. Algunos
estudios con animales, sin embargo, sugieren que bajos
niveles de RF podrían acelerar el desarrollo del cáncer en
animales de laboratorio. Sin embargo, muchos de los
estudios que mostraron un desarrollo de tumores
aumentado usaron animales que habían sido alterados
genéticamente o tratados con sustancias químicas
causantes de cáncer de modo que estuvieran
predispuestos a desarrollar cáncer aún sin la presencia de
una exposición a RF. Otros estudios expusieron a los
animales a RF durante períodos de hasta 22 horas al día.
Estas condiciones no se asemejan a las condiciones bajo
las cuales la gente usa los teléfonos inalámbricos, de
modo que no sabemos con certeza qué significan los
resultados de dichos estudios para la salud humana. Tres
78 VX4650
grandes estudios epidemiológicos se han publicado desde
diciembre de 2000. Entre ellos, los estudios investigaron
cualquier posible asociación entre el uso de teléfonos
inalámbricos y el cáncer primario del cerebro, glioma,
meningioma, o neuroma acústico, tumores del cerebro o
de la glándula salival, leucemia u otros tipos de cáncer.
Ninguno de los estudios demostró la existencia de ningún
efecto dañino para la salud originado en la exposición a RF
de los teléfonos inalámbricos. No obstante, ninguno de los
estudios puede responder a preguntas sobre la exposición
a largo plazo, ya que el período promedio de uso del
teléfono en estos estudios fue de alrededor de tres años.
aplicables a poblaciones humanas, pero puede ser
necesario un seguimiento de 10 años o más para
proporcionar respuestas acerca de algunos efectos sobre
la salud, como lo sería el cáncer. Esto se debe a que al
intervalo entre el momento de la exposición a un agente
cancerígeno y el momento en que se desarrollan los
tumores, en caso de hacerlo, puede ser de muchos,
muchos años. La interpretación de los estudios
epidemiológicos se ve entorpecida por la dificultad de
medir la exposición real a RF durante el uso cotidiano de
los teléfonos inalámbricos. Muchos factores afectan esta
medición, como el ángulo al que se sostiene el teléfono, o
el modelo de teléfono que se usa.
5. ¿Qué investigaciones se necesitan para decidir si la
exposición a RF de los teléfonos inalámbricos representa
un riesgo para la salud?
6. ¿Qué está haciendo la FDA para averiguar más acerca
de los posibles efectos en la salud de la RF de los
teléfonos inalámbricos?
Una combinación de estudios de laboratorio y estudios
epidemiológicos de gente que utiliza teléfonos
inalámbricos efectivamente proporcionaría algunos de los
datos necesarios. Dentro de algunos años se podrán
realizar estudios de exposición animal durante toda la
vida. Sin embargo, se necesitarían grandes cantidades de
animales para proporcionar pruebas confiables de un
efecto promotor del cáncer, si existiera. Los estudios
epidemiológicos pueden proporcionar datos directamente
La FDA está trabajando con el U.S. National Toxicology
Program (Programa nacional de toxicología de EE.UU.) y
con grupos de investigadores en todo el mundo para
asegurarse de que se lleven a cabo estudios de alta
prioridad con animales para ocuparse de importantes
preguntas referentes a los efectos de la exposición a la
energía de radiofrecuencia (RF).
La FDA ha sido un participante líder en el Proyecto de
VX4650 79
Seguridad
campos electromagnéticos (EMF) internacional de la
Organización Mundial de la Salud desde su origen en 1996.
Un importante resultado de este trabajo ha sido el
desarrollo de una agenda detallada de necesidades de
investigación que ha impulsado el establecimiento de
nuevos programas de investigación por todo el mundo. El
proyecto también ha ayudado a desarrollar una serie de
documentos de información pública sobre temas de EMF.
La FDA y la Asociación de Telecomunicaciones e Internet
Celular (CTIA) tienen un Acuerdo de investigación y
desarrollo en colaboración (CRADA) formal para realizar
investigaciones sobre la seguridad de los teléfonos
inalámbricos. La FDA proporciona la supervisión científica,
recibiendo informes de expertos de organizaciones
gubernamentales, de la industria y académicas. La
investigación patrocinada por la CTIA se realiza por medio
de contratos con investigadores independientes. La
investigación inicial incluirá tanto estudios de laboratorio
como estudios de los usuarios de teléfonos inalámbricos. El
CRADA también incluirá una amplia evaluación de las
necesidades de investigación adicionales en el contexto de
los más recientes desarrollos de investigación del mundo.
7. ¿Cómo puedo averiguar cuánta exposición a energía
de radiofrecuencia puedo recibir al usar mi teléfono
inalámbrico?
Todos los teléfonos que se venden en Estados Unidos
deben cumplir con los lineamientos de la Comisión Federal
de Comunicaciones (FCC) que limitan las exposiciones a la
energía de radiofrecuencia (RF). La FCC estableció esos
lineamientos asesorada por la FDA y otras dependencias
federales de salud y seguridad. El límite de la FCC para
exposición a RF de teléfonos inalámbricos se ha fijado a
una Tasa de absorción específica (Specific Absorption
Rate, SAR) de 1.6 watts por kilogramo (1.6 W/kg). El límite
de la FCC es consistente con los estándares de seguridad
desarrollados por el Instituto de ingeniería eléctrica y
electrónica (Institute of Electrical and Electronic
Engineering, IEEE) y el Consejo nacional para la protección
y medición de la radiación (National Council on Radiation
Protection and Measurement). El límite de exposición
toma en consideración la capacidad del cuerpo de
eliminar el calor de los tejidos que absorben energía de los
teléfonos inalámbricos y se ha fijado muy por debajo de los
niveles que se sabe que tienen algún efecto. Los
fabricantes de teléfonos inalámbricos deben informar a la
FCC del nivel de exposición a RF de cada modelo de
80 VX4650
teléfono. El sitio Web de la FCC (http://www. fcc.gov/oet/
rfsafety) ofrece direcciones para ubicar el número de
certificación de la FCC en su teléfono de modo que puede
encontrar el nivel de exposición de RF de su teléfono en la
lista que aparece en línea.
estandarizada mejore notablemente la consistencia de las
mediciones realizadas en distintos laboratorios con el
mismo teléfono. La SAR es la medición de la cantidad de
energía que absorben los tejidos, ya sea de todo el cuerpo
o de una pequeña parte de él. Se mide en watts/kg (o
miliwatts/g) de materia. Esta medición se emplea para
determinar si un teléfono inalámbrico cumple con los
lineamientos de seguridad.
8. ¿Qué ha hecho la FDA para medir la energía de
radiofrecuencia que proviene de los teléfonos
inalámbricos?
9. ¿Qué pasos puedo dar para reducir mi exposición a la
energía de radiofrecuencia de mi teléfono inalámbrico?
El Instituto de Ingenieros en Electrónica y Electricidad
(IEEE) está desarrollando un estándar técnico para la
medición de la exposición a energía de radiofrecuencia
(RF) proveniente de los teléfonos inalámbricos y otros
dispositivos inalámbricos con la participación y el
liderazgo de científicos e ingenieros de la FDA. El estándar
denominado “Práctica recomendada para determinar la
Tasa de absorción específica (SAR) pico espacial en el
cuerpo humano debida a los dispositivos de comunicación
inalámbrica: técnicas experimentales” establece la
primera metodología consistente de pruebas para medir la
tasa a la cual se deposita la RF en la cabeza de los
usuarios de teléfonos inalámbricos. El método de prueba
utiliza un modelo de la cabeza humana que simula sus
tejidos. Se espera que la metodología de pruebas de SAR
Si estos productos presentan un riesgo, cosa que en este
momento no sabemos que ocurra, es probablemente muy
pequeño. Pero si le preocupa evitar incluso los riesgos
potenciales, puede tomar en cuenta estos consejos
sencillos para reducir al mínimo su exposición a la energía
de radiofrecuencia (RF). Dado que el tiempo es un factor
clave en la cantidad de exposición que una persona puede
recibir, la reducción del tiempo dedicado al uso de
teléfonos inalámbricos reducirá la exposición a RF.
Si debe mantener conversaciones prolongadas con
teléfonos inalámbricos todos los días, puede aumentar la
distancia entre su cuerpo y la fuente de la RF, dado que el
nivel de exposición cae drásticamente con la distancia.
VX4650 81
Seguridad
Por ejemplo, podría usar un auricular y llevar el teléfono
inalámbrico lejos del cuerpo o usar teléfonos inalámbricos
conectados a una antena remota.
Reiteramos que los datos científicos no demuestran que
los teléfonos inalámbricos sean dañinos. Pero si le
preocupa la exposición a RF de estos productos, puede
usar medidas como las descritas arriba para reducir su
recomendación similar en diciembre de 2000. Señalaron
que no hay pruebas de que el uso de teléfonos
inalámbricos cause tumores cerebrales u otros efectos
dañinos. Su recomendación para que se limitara el uso de
teléfonos inalámbricos por parte de los niños era
estrictamente precautoria, no estaba basada en ninguna
evidencia científica de que exista ningún riesgo para la
salud.
exposición
a
RF producto del uso de teléfonos
inalámbricos.
11. ¿Qué hay de la interferencia de los teléfonos
inalámbricos con el equipo médico?
10. ¿Qué hay del uso de teléfonos inalámbricos por parte
de los niños?
La energía de radiofrecuencia (RF) de los teléfonos
inalámbricos puede interactuar con algunos dispositivos
electrónicos. Por este motivo, la FDA ayudó al desarrollo
de un método de prueba detallado para medir la
interferencia electromagnética (EMI) de los teléfonos
inalámbricos en los marcapasos implantados y los
desfibriladores. El método de prueba ahora es parte de un
estándar patrocinado por la Asociación para el avance de
la instrumentación médica (Association for the
Advancement of Medical Instrumentation, AAMI). El
borrador final, un esfuerzo conjunto de la FDA, los
fabricantes de dispositivos médicos y otros grupos, se
concluyó a fines de 2000. Este estándar permitirá a los
La evidencia científica no muestra ningún peligro para los
usuarios de teléfonos inalámbricos, incluidos los niños y
adolescentes. Si desea reducir la exposición a la energía
de radiofrecuencia (RF), las medidas arriba indicadas se
aplicarían a niños y adolescentes que usen teléfonos
inalámbricos. La reducción del tiempo de uso de teléfonos
inalámbricos y aumentar la distancia entre el usuario y la
fuente de RF disminuirá la exposición a RF.
Algunos grupos patrocinados por otros gobiernos han
aconsejado que se desaliente el uso de teléfonos
inalámbricos del todo para los niños. Por ejemplo, el
gobierno del Reino Unido distribuyó volantes con una
82 VX4650
fabricantes asegurarse de que los marcapasos cardiacos
y los desfibriladores estén a salvo de EMI de teléfonos
inalámbricos.
12. ¿Dónde puedo hallar información adicional?
Para obtener información adicional, por favor consulte los
recursos siguientes:
La FDA ha probado aparatos para la sordera para
determinar si reciben interferencia de los teléfonos
inalámbricos de mano y ayudó a desarrollar un estándar
voluntario patrocinado por el Instituto de Ingenieros en
Electrónica y Electricidad (IEEE). Este estándar especifica
los métodos de prueba y los requisitos de desempeño de
los aparatos para la sordera y los teléfonos inalámbricos
de modo que no ocurra ninguna interferencia cuando una
persona use al mismo tiempo un teléfono y un aparato
para la sordera que sean “compatibles”. Este estándar fue
aprobado por la IEEE en 2000.
Página Web de la FDA sobre teléfonos inalámbricos
(http://www.fda.gov/cdrh/phones/index.html)
Programa de seguridad de RF de la Comisión Federal de
Comunicaciones (FCC)
(http://www.fcc.gov/oet/rfsafety)
Comisión Internacional para la Protección contra
Radiación no Ionizante
(http://www.icnirp.de)
Proyecto de EMF internacional de la Organización
Mundial de la Salud (OMS)
La FDA sigue supervisando el uso de los teléfonos
inalámbricos para detectar posibles interacciones con
otros dispositivos médicos. Si se determinara que se
presenta una interferencia dañina, la FDA realizará las
pruebas necesarias para evaluar la interferencia y
trabajará para resolver el problema.
(http://www.who.int/emf)
Junta Nacional de Protección Radiológica (R.U.)
(http://www.nrpb.org.uk/)
VX4650 83
Seguridad
instalado para su teléfono inalámbrico como si utiliza un
accesorio para teléfono con altavoz, saque partido de
estos dispositivos si están a su disposición.
10 Consejos de Seguridad para Conductores
Un teléfono inalámbrico le ofrece la extraordinaria
capacidad de comunicarse por voz prácticamente en
cualquier lugar y a cualquier hora.Las ventajas de los
teléfonos inalámbricos van acompañadas de una gran
responsabilidad por parte de los conductores. Cuando
conduzca un coche, la conducción es su primera
responsabilidad. Cuando utilice un teléfono inalámbrico y
esté al volante, sea sensato y tenga presente los
siguientes consejos:
3. Coloque el teléfono inalámbrico en un lugar donde
pueda alcanzarlo fácilmente.Asegúrese de que coloca
el teléfono inalámbrico en un lugar de fácil alcance y
donde pueda utilizarlo sin perder de vista la carretera.Si
recibe una llamada en un momento inoportuno, si es
posible, dejeque el buzón de voz conteste en su lugar.
4. Termine las conversaciones que se produzcan en
condiciones
o
situaciones de conducción
1. Conozca su teléfono inalámbrico y sus funciones, como
la marcación rápida y la rellamada. Lea el manual de
instrucciones con atención y aprenda a sacar partido
de las valiosas funciones que ofrecen la mayoría de
teléfonos, entre las que se incluyen la rellamada
automática y la memoria.Asimismo, memorice el
teclado del teléfono para que pueda utilizar la función
de marcación rápida sin dejar de prestar atención a la
carretera.
peligrosa.Comunique a la persona con la que está
hablando que está conduciendo; si fuera necesario,
termine la llamada en situaciones de tráfico denso o en
las que las condiciones climatológicas comporten un
peligro para la conducción.La lluvia, el aguanieve, la
nieve y el hielo pueden ser peligrosos, así como un
tráfico denso.Como conductor, su principal
responsabilidad es prestar atención a la carretera.
5. No tome notas ni busque números de teléfono mientras
conduce. Si está leyendo una agenda o una tarjeta de
visita, así como si está escribiendo una lista de “tareas
por hacer” mientras conduce, no está viendo lo que
2. Cuando esté disponible, utilice un dispositivo de manos
libres.Varios accesorios para teléfonos inalámbricos
con manos libres están
a
su disposición
actualmente.Tanto si elige un dispositivo montado e
84 VX4650
está haciendo.Es de sentido común:no se ponga en una
situación peligrosa porque esté leyendo o escribiendo y
no esté prestando atención a la carretera o a los
vehículos cercanos.
8. Utilice el teléfono inalámbrico para pedir ayuda.Un
teléfono inalámbrico es una de las mejores
herramientas que posee para protegerse a usted y
proteger a su familia en situaciones peligrosas; con el
teléfono a su lado, sólo tres números le separarán de la
ayuda necesaria.Marque el 911 u otro número de
emergencia local en caso de incendio, accidente de
6. Marque con cuidado y observe el tráfico; si es posible,
realice las llamadas cuando no esté circulando o antes
de ponerse en circulación.Intente planificar sus
llamadas antes de iniciar el viaje o intente que éstas
coincidan con los momentos en los que esté parado en
una señal de Stop, en un semáforo en rojo o en
cualquier otra situación en la que deba detenerse.Si
necesita marcar mientras conduce, siga este sencillo
consejo: marque unos cuantos números, compruebe la
tráfico, peligro en la carretera
o
emergencia
médica.Recuerde que es una llamada gratuita para su
teléfono inalámbrico.
9. Utilice el teléfono inalámbrico para ayudar a otras
personas en situaciones de emergencia.Un teléfono
inalámbrico le ofrece la oportunidad perfecta para ser
un “buen samaritano” en su comunidad. Si presencia
un accidente de circulación, un delito o cualquier otra
emergencia grave en la que haya vidas en peligro,
llame al 911 o a otro número de emergencia local, ya
que también le gustaría que otros lo hicieran por usted.
carretera
marcando.
y
los espejos y,
a
continuación, siga
7. No mantenga conversaciones conflictivas o de gran
carga emocional que puedan distraerle. Este tipo de
conversaciones debe evitarse a toda costa, ya que le
distraen e incluso le pueden poner en peligro cuando
está al volante.Asegúrese de que la gente con la que
está hablando sabe que está conduciendo y, si fuera
necesario, termine aquellas conversaciones que
puedan distraer su atención de la carretera.
10.Llame al servicio de asistencia en carretera o a un
número de asistencia especial para situaciones que no
sean de emergencia si fuera necesario.Durante la
conducción encontrará situaciones que precisen de
atención, pero no serán lo bastante urgentes como
para llamar a los servicios de emergencia.Sin embargo,
VX4650 85
Seguridad
puede utilizar el teléfono inalámbrico para echar una
mano.Si ve un vehículo averiado que no supone un
peligro, una señal de tráfico rota, un accidente de
tráfico de poca importancia en la que no parece haber
heridos o un vehículo robado, llame al servicio de
asistencia en carretera o a otro número de asistencia
especial para situaciones que no sean de emergencia.
Para obtener más información, llame al 888-901-SAFE o
visite nuestro sitio Web www.wow-com.com.
Información al consumidor sobre la SAR
(Tasa de absorción específica, Specific Absorption Rate)
Este modelo de teléfono cumple con los requisitos
gubernamentales de exposición a las ondas de radio. Su
teléfono inalámbrico es un transmisor y receptor de radio.
Está diseñado y fabricado para que no supere los límites
de emisión para la exposición
a
energía de
radiofrecuencia (RF) establecidos por la Comisión Federal
de Comunicaciones del gobierno de EE.UU. Estos límites
son parte de unos lineamientos generales y establecen los
niveles permitidos de energía de radiofrecuencia para la
población en general. Estos lineamientos están basados
en estándares que desarrollaron organizaciones
científicas independientes por medio de una evaluación
periódica y exhaustiva de los estudios científicos. Los
estándares incluyen un notable margen de seguridad
diseñado para garantizar la salud de todas las personas
sin importar su edad o condición física.
Información facilitada por la Cellular Telecommunications
Industry Association (Asociación de empresas de
telecomunicaciones inalámbricas)
El estándar de exposición para los teléfonos celulares
inalámbricos emplea una unidad de medida llamada Tasa
de absorción específica o SAR. El límite de SAR
establecido por la FCC es de 1.6 W/kg. Las pruebas de SAR
se realizan usando posiciones de funcionamiento
estándar especificadas por la FCC con el teléfono
86 VX4650
transmitiendo a su nivel de energía certificado más alto en
todas las bandas de frecuencia probadas. Aunque la SAR
se determina al nivel de potencia más alto certificado, el
nivel de SAR real del teléfono en funcionamiento puede
estar muy por debajo del valor máximo. Dado que el
teléfono está diseñado para funcionar a varios niveles de
potencia para usar sólo la necesaria para llegar a la red,
en general, mientras más cerca esté de una antena de
estación de base inalámbrica, menor será la emisión de
potencia.
Antes de que un modelo de teléfono esté disponible para
su venta al público, debe probarse y certificarse ante la
FCC que demostrar que no supera el límite establecido por
el gobierno para la exposición segura. Las pruebas se
realizan en posiciones y ubicaciones (por ejemplo, en la
oreja y llevándolo en el cuerpo) según lo demanda la FCC
para cada modelo. El valor SAR más alto de este modelo
de teléfono cuando se probó usándolo cerca del oído es
de 1.21 W/kg y al usarlo en el cuerpo, como se describe en
esta guía del usuario es de 1.28 W/kg (las mediciones de
uso en el cuerpo difieren según los modelos de teléfono en
función de los accesorios disponibles y los requisitos de la
FCC). Aun cuando puede haber diferencias entre los
niveles de SAR de varios teléfonos y en varias posiciones,
todos ellos cumplen el requisito gubernamental para una
exposición segura.
La FCC ha otorgado una Autorización de equipo para este
modelo de teléfono con todos los niveles de SAR
reportados
y
evaluados en cumplimiento de los
lineamientos de emisión de radiofrecuencias de la FCC. La
información sobre SAR de este modelo de teléfono está
archivada con la FCC y puede encontrarse en la sección
Display
Grant
(Mostrar
subvención)
de
http://www.fcc.gov/oet/fccid después de buscar la ID
BEJVX4700 de la FCC.
Se puede encontrar información adicional sobre Tasas de
absorción específica (SAR) en el sitio Web de la
Asociación de la Industria de las Telecomunicaciones
Celulares (Cellular Telecommunications Industry
Association, CTIA) en http://www.wow-com.com.
* En Estados Unidos y Canadá, el límite de SAR de los
teléfonos celulares usados por el público es de 1.6
watts/kg (W/kg) promediados sobre un gramo de tejido. El
estándar incluye un margen sustancial de seguridad para
dar una protección adicional al público y para tomar en
cuenta cualquier variación en las mediciones.
VX4650 87
Accesorios
Hay diversos accesorios disponibles para su teléfono celular.
Consulte a su distribuidor local para saber con cuáles cuenta.
Diadema
La diadema se conecta al teléfono
permitiendo un funcionamiento de
manos libres. Incluye auriculares,
micrófono y botón integrado de
contestación/fin de llamada.
Cargador de viajero
El adaptador de CA le permite
activar su teléfono con.
Voltaje de entrada: 100-240VCA 50-60Hz
Voltaje de salida: 5.0V, 1000mA
NOTA
Funciona en modo de vibración/sin sonido en
Modo de cortesía y Modo silenciar todo incluso
al estar conectado a un auricular.
Batería
Hay dos baterías disponibles. La
batería estándar y la extendida.
Cargador para el automóvil
Cable del USB
El cargador para el automóvil le
permite hacer funcionar el teléfono
y llevar a cabo una carga lenta de la
batería del teléfono en su vehículo.
Cargar una batería completamente
descargada requiere de 5 horas.
Conecta su teléfono con su
computadora personal.
Cargador de baterías
Kit de manos libres para automóvil
(portátil)
El cargador de baterías le permite
cargar la batería sola, sin el
teléfono. Puede cargar una batería
completamente descargada en 3.5
horas.
El kit de manos libres para
automóvil, le permite conectar el
teléfono a la toma de corriente de
su automóvil, y utilizarlo sin tener
que sujetarlo. Puede cargar una
batería completamente descargada
en 5 horas.
Funda
88 VX4650
Información de la garantía
(6) El cliente correrá con el costo de enviar el producto al
Departamento de servicio al cliente de LG. LG correrá con
el costo de enviar el producto de vuelta al consumidor
después de realizar el servicio en los términos de esta
garantía limitada.
1. LO QUE CUBRE ESTA GARANTÍA:
LG le ofrece una garantía limitada en el sentido de que la
unidad adjunta y sus accesorios incluidos estarán libres
de defectos de materiales y de mano de obra según los
términos y condiciones siguientes:
(1) La garantía limitada de la unidad y sus accesorios adjuntos
tiene una vigencia de un (1) año a partir de la fecha de la
compra original. El período de garantía restante para que la
unidad sea reparada o reemplazada se determinará
mediante la presentación del recibo original de ventas por
la compra de la unidad.
2. LO QUE ESTA GARANTÍA NO CUBRE:
(1) Defectos o daños resultado del uso del producto de
cualquier forma que no sea la normal y acostumbrada.
(2) Defectos o daños resultado de un uso anormal, de
condiciones anormales, de almacenamiento inadecuado,
de exposición a humedad o agua, de modificaciones no
autorizadas, de conexiones no autorizadas, de
reparaciones no autorizadas, mal uso, negligencia, abuso,
accidente, alteración, instalación inadecuada u otros actos
que no sean culpa de LG, entre ellos el daño causado por el
envío, fusibles fundidos o derrames de comida o líquidos.
(2) La garantía limitada se extiende solamente al comprador
original del producto y no se puede asignar o transferir a
ningún comprador o usuario final subsiguiente.
(3) La garantía limitada sólo es válida para el comprador
original del producto siempre y cuando esté en EE.UU.,
incluidos Alaska, Hawai, los territorios de EE.UU. y todas las
provincias canadienses.
(3) Rotura o daño en las antenas a menos que haya sido
causado directamente por defectos en los materiales o
mano de obra.
(4) La caja externa y las partes decorativas estarán libres de
defectos importantes al momento de su distribución y, por
tanto, no estarán cubiertas bajo estos términos de garantía
limitada.
(4) Supuestos defectos o desperfectos del producto si el
Departamento de servicio al cliente de LG no recibió
notificación por parte del consumidor durante el período de
garantía limitada aplicable.
(5) A solicitud de LG, el consumidor debe proporcionar
información satisfactoria para LG, demostrando la fecha de
compra o intercambio.
(5) Productos cuyo número de serie se haya eliminado o vuelto
ilegible.
VX4650 89
Información de la garantía
(6) Esta garantía limitada sustituye a toda otra garantía,
CONSECUENCIAL PRODUCIDO POR EL USO DE, O LA
INCAPACIDAD DE USAR, ESTE PRODUCTO, NI POR EL
INCUMPLIMIENTO DE NINGUNA GARANTÍA EXPLÍCITA
O IMPLÍCITA, INCLUIDA LA GARANTÍA IMPLÍCITA DE
COMERCIABILIDAD APLICABLE A ESTE PRODUCTO.
Algunos estados no permiten la limitación exclusiva de
daños incidentales o consecuenciales, ni limitaciones
sobre cuánto dura una garantía implícita, de modo que es
posible que estas limitaciones o exclusiones no se
apliquen a usted. Esta garantía le otorga derechos legales
específicos y es posible que también tenga otros
derechos, que variarán de estado a estado.
explícita o implícita ya sea de hecho o por efectos de ley,
estatuto o de otro tipo, entre ellos cualquier garantía
implícita de comercialización o adecuación para algún uso
en particular.
(7) Daños resultantes del uso de accesorios no aprobados por
LG.
(8) Todas las superficies de plástico y todas las demás partes
externas expuestas que se hayan rayado o dañado debido
al uso normal del cliente.
(9) Productos que se hagan funcionar fuera de los parámetros
máximos publicados.
(10) Productos usados u obtenidos en un programa de
rentas.
4. CÓMO OBTENER SERVICIO POR LA GARANTÍA:
(11)Consumibles (como los fusibles).
Para obtener servicio sobre la garantía, llame al siguiente
número de teléfono desde cualquier punto en Estados
Unidos continental:
3. DERECHOS DE LA LEY ESTATAL:
No hay ninguna otra garantía explícita aplicable a este
producto. LA DURACIÓN DE CUALQUIER GARANTÍA
IMPLÍCITA, INCLUIDA LA GARANTÍA IMPLÍCITA DE
COMERCIABILIDAD, ESTÁ LIMITADA A LA DURACIÓN DE
LA GARANTÍA EXPLÍCITA AQUÍ INDICADA. LG
INFOCOMM U.S.A., INC. NO SERÁ RESPONSABLE POR LA
PÉRDIDA DEL USO DEL PRODUCTO, INCONVENIENTES,
PÉRDIDAS O CUALQUIER OTRO DAÑO DIRECTO O
LG Electronics Service
201 James Record Road
Huntsville, AL 35824
Tel. 1-800-793-8896
Email: http://us.lgservice.com
Llame o escriba para conocer la ubicación del centro de
servicio autorizado de LGE más cercano a usted y los
procedimientos para hacer válida la garantía.
90 VX4650
Índice
10 Consejos de Seguridad
para Conductores 84
Bienvenidos 7
Bloq. Teléfono 64
Borrado Llam. 37
Borrar 28
Borrar Contactos 65
Borrar todo 45
Descripción general de los
menús 11
Descripción general del
eléfono 10
Detalles técnicos 7
Dígitos de llamada 62
Guardado 44
H
A
Hacer llamadas 16
Acceso al menú 33
Accesorios 88
I
Actualización de la FDA para
los consumidores 76
Ajustando El Altavoz
Encendido 18
Ajuste rápido del volumen
17
Alarma de reloj 55
Alerta de mensaje 59
Alertas Web 52
Ambiente 58
Anunciar alertas 47
Aparato 54
Iconos en pantalla 15
ID del llamador 18
Idioma 63
Iluminación de fondo 61
Imágenes 53
Info de tel 69
Información al consumidor
sobre la SAR 86
Información de la garantía 89
Información de seguridad 73
Información de seguridad de
la TIA 70
Iniciar Browser 51
Introducción de texto 20
C
E
Calculadora 57
Editor de texto 62
Emergencia #s 65
Entrada 42
Entradas de contactos 23
ERI Sonidos 60
Estado de Luz 63
Estilo del menú 61
Ez Sugerencia 57
Cambiar Bloquear 65
Cambiar de servicio 60
Cargar la batería 13
Colores de tema 62
Comando de entrenamiento
48
Comando de voz 46
Conexión al PC 68
Configuración de datos 68
Configuraciones de mensaje
44
Contactos 33
Contador de KB 37
Contents 6
Contraste 62
Correo de voz 39
Correo de voz # 45
F
Atajo 56
Auto borrar 45
Fijar NAM 63
Firma 45
Fuente 62
Fuerza de la señal 14
Función de Mudo 17
Funciones 66
Auto guardar 44
Auto NAM 64
Auto Respuesta automát 66
Auto Volumen 67
Ayuda 48
L
LCD 61
Lista de Contactos 34
Lista Llam 36
Llam. entrante 37
Llam. fracasada 37
Llam. saliente 36
Llamada en espera 18
Ayuda de acceso directo 69
G
Get It Now 48, 49
Glosario de iconos 69
Grupos 35
B
D
batería 13
Datos/Fax 68
VX4650 91
Índice
Llamada Restringidas 65
Llamadas conexión 60
Llame al # 45
Reintento automático 66
Reloj universal 58
Relojes 62
Remarcado de llamadas 16
Reporduccion automatica 45
Respuesta de llamada 66
Restablecer Implícito 66
Tono de DTMF 60
N
Nivel de carga de la batería
13
V
Lugar 69
Nota 56
Vista automatica 45
Volumen 59
Volver al principio 60
Voz 46
Nuevo E-mail 34
Nuevo Número 34
Nuevos Mensaje 39
M
Marcaciones de un toque 67
Marcaciones Rápidas 35
Marcado con comandos de
voz 19
S
O
S/W Versión 69
Objetos de mensaje de
Marcado rápido 18, 32
Media 53
Mejor coincidencia 47
Memo Vocal 56
Mensajes 38
Mensajes de Web 52
Mi # de tel 69
Salida 43
texto 54
Obtenir info 50
Opciones de texto 41
Seguridad 64
Seleccione Sistema 63
Señal sonora de un minuto
60
Servicio Alertas 59
Sist. de servicio 64
Sistema 63
P
Pantallas 61
Pausa 2 seg (T) 30
Pausa Fija (P) 30
Pendon 61
Plan 55
Poder-Salvo 63
Privacidad de voz 67
Mi tarjeta V 35
Mobile Web 50
Sonido 53
Sonidos 59
Modalidad de asentar 45
Modalidad TTY 67
Modo 123 (Números) 20
Modo Abc (Multi-toque) 20
Modo de bloqueo 17
Modo de manerae 17
Modo de Símbolos 20
Modo de Smiley 21
Modo PalabraT9 (T9) 20
Modos de sonido 47
Mostrar 61
T
Texto rápido 45
Tiempo de uso 37
Timbres 59
Tonalidad tecla 59
Tono de
R
recaución de Seguridad
Importante 2
Recibir llamadas 16
Referencia de los iconos de
mensaje 41
activación/desactivación
60
92 VX4650
|
Nokia 305 User Manual
Marantz Professional CDR631 User Manual
LG Electronics GB106 User Manual
Janam Cell Phone XP20 User Manual
Gemini CDX 602 User Manual
Freud Tools SD200 Series User Manual
Bunn Coffeemaker CDBCFP User Manual
Barracuda Networks ST315310A User Manual
Barracuda Networks ST313620A User Manual
Audiovox Rampage AV 455 User Manual