User Guide
Some of the contents in this manual may differ from your phone depending
on the software of the phone or your service provider. AT&T marks contained
herein are trademarks of AT&T Intellectual Property and/or AT&T affiliated
companies. © 2010 AT&T Intellectual Property. All rights reserved.
Actual color of the phone may vary.
Bluetooth QD ID B015987
LIMITED WARRANTY STATEMENT
1. WHAT THIS WARRANTY COVERS :
2.WHAT THIS WARRANTY DOES
NOT COVER :
1. Defects or damages resulting from use of the
product in other than its normal and customary
manner.
LG offers you a limited warranty that the enclosed
subscriber unit and its enclosed accessories will
be free from defects in material and workmanship,
according to the following terms and conditions:
1. The limited warranty for the product extends for
TWELVE (12) MONTHS beginning on the date
of purchase of the product with valid proof of
purchase, or absent valid proof of purchase,
FIFTEEN (15) MONTHS from date of manufacture
as determined by the unit’s manufacture date code.
2. Defects or damages from abnormal use, abnormal
conditions, improper storage, exposure to moisture
or dampness, unauthorized modifications,
unauthorized connections, unauthorized repair,
misuse, neglect, abuse, accident, alteration,
improper installation, or other acts which are
not the fault of LG, including damage caused by
shipping, blown fuses, spills of food or liquid.
2. The limited warranty extends only to the original
purchaser of the product and is not assignable or
transferable to any subsequent purchaser/end user.
3. Breakage or damage to antennas unless caused
directly by defects in material or workmanship.
3. This warranty is good only to the original purchaser
of the product during the warranty period as long
as it is in the U.S, including Alaska, Hawaii, U.S.
Territories and Canada.
4. That the Customer Service Department at LG was
not notified by consumer of the alleged defect or
malfunction of the product during the applicable
limited warranty period.
4. The external housing and cosmetic parts shall
be free of defects at the time of shipment and,
therefore, shall not be covered under these limited
warranty terms.
5. Products which have had the serial number
removed or made illegible.
6. This limited warranty is in lieu of all other
warranties, express or implied either in fact or
by operations of law, statutory or otherwise,
including, but not limited to any implied warranty
of marketability or fitness for a particular use.
5. Upon request from LG, the consumer must provide
information to reasonably prove the date of
purchase.
6. The customer shall bear the cost of shipping the
product to the Customer Service Department of LG.
LG shall bear the cost of shipping the product back
to the consumer after the completion of service
under this limited warranty.
7. Damage resulting from use of non-LG approved
accessories.
8. All plastic surfaces and all other externally exposed
parts that are scratched or damaged due to normal
customer use.
9. Products operated outside published maximum
Some states do not allow the exclusive of
limitation of incidental or consequential damages
or limitations on how long an implied warranty
lasts; so these limitations or exclusions may not
apply to you. This warranty gives you specific legal
rights and you may also have other rights which
vary from state to state.
ratings.
10. Products used or obtained in a rental program.
11. Consumables (such as fuses).
3. WHAT LG WILL DO:
LG will, at its sole option, either repair, replace or
refund the purchase price of any unit that does
not conform to this limited warranty. LG may
choose at its option to use functionally equivalent
reconditioned, refurbished or new units or parts
or any units. In addition, LG will not re-install or
back-up any data, applications or software that
you have added to your phone. It is therefore
recommended that you back-up any such data or
information prior to sending the unit to LG to avoid
the permanent loss of such information.
5. HOW TO GET WARRANTY
SERVICE :
To obtain warranty service, please call or fax to
the following telephone numbers from anywhere
in the continental United States:
Tel. 1-800-793-8896 or Fax. 1-800-448-4026
Or visit www.lgeservice.com.
Correspondence may also be mailed to:
LG Electronics MobileComm U.S.A., Inc.
201 James Record Road Huntsville, AL 35824
4. STATE LAW RIGHTS :
DO NOT RETURN YOUR PRODUCT TO THE ABOVE
ADDRESS.
Please call or write for the location of the LG
authorized service center nearest you and for the
procedures for obtaining warranty claims.
No other express warranty is applicable to
this product. THE DURATION OF ANY IMPLIED
WARRANTIES, INCLUDING THE IMPLIED
WARRANTY OF MARKETABILITY, IS LIMITED TO
THE DURATION OF THE EXPRESS WARRANTY
HEREIN. LG INFOCOMM INC. SHALL NOT BE
LIABLE FOR THE LOSS OF THE USE OF THE
PRODUCT, INCONVENIENCE, LOSS OR ANY
OTHER DAMAGES, DIRECT OR CONSEQUENTIAL,
ARISING OUT OF THE USE OF, OR INABILITY
TO USE, THIS PRODUCT OR FOR ANY BREACH
OF ANY EXPRESS OR IMPLIED WARRANTY,
INCLUDING THE IMPLIED WARRANTY OF
MARKETABILITY APPLICABLE TO THIS PRODUCT.
User Guide
Table of Contents
2
3
4
Phone Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
5
Your Phone
1. Power key
Phone Components
2. Earpiece: Lets you hear the caller and
automated prompts.
1
2
3
3. Proximity Sensor
4. SEND key: Press this key in standby mode
to quickly access the most recent missed,
dialed, and received calls.
5. END key: Ends or rejects a call.
Press once to return to the standby screen.
6. Clear key
4
5
6
7. Side volume keys
• When on the standby screen: Allows
you to set the Ringtone and Touchtone
volume. Hold the Down key to toggle the
Vibrate only Mode On and Off.
• During a call: Allows you to change the
Earpiece volume.
• When playing background music:
Allows you to change the music volume.
7
8
9
8. Charger/USB Port
9. Multi-Tasking key
10
10. Camera key: Press to start the Camera
function. Press and hold to start the Video
Camera function.
6
Getting Started
2. Remove the battery
Installing the SIM Card and
Battery
Hold the top edge of the phone and use the
fingernail cutout to lift the battery from the
battery compartment.
1. Remove the battery cover
Press down on the battery cover and slide it
towards the bottom of the phone. Then lift
the battery cover off.
nWarning
Do not remove the battery when the phone is
switched on, as this may damage the phone.
8
Getting Started
3. Install the SIM card
4. Install the battery
Please make sure the battery is removed
from the phone before installing the SIM
card. Slide the SIM card into the SIM card
slot. Make sure the gold contact area on
the card is facing downwards. To remove
the SIM card, pull it gently in the opposite
direction.
Insert the top of the battery first into the
top edge of the battery compartment.
Ensure that the battery contacts align
with the terminals on the phone. Press the
bottom of the battery down until it clips
into place.
9
Getting Started
Charging your phone
Lift the charger port cover on the right side
Installing a Memory Card
You can expand the available memory space
on your phone by using a memory card.
of your
. Insert the charger
connector to the phone (ensure that side
‘B’ of the connector is facing up) and then
plug the other end into a wall socket. Your
will need to be charged
nTip
A memory card is an optional accessory.
1. Press down on the battery cover and slide it
towards the bottom of the phone. Then lift
the battery cover off.
until you receive a ‘Battery Full’ notification.
Important!
The battery must be fully charged initially to
improve battery lifetime.
2. Slide the memory card into the slot at
the top (as demonstrated in the following
image), until it clicks into place. Make sure
the gold contact area is facing downwards.
nWarning
Use of unauthorized accessories could damage
your phone and void your warranty.
10
Getting Started
3. Replace the battery cover.
nNote
If your memory card has existing content, it
will automatically be filed in the correct folder.
For example, videos will be accessible from
the Videos folder. If your memory card has
protected content (i.e. content such as songs
or graphics with Digital Rights Management
copywriting loaded from another device), it will
not be accessible. You will need to reformat the
memory card prior to using it with this device.
11
Getting Started
On-Screen Icons
The table below describes various display indicators or icons that appear on the phone's display
screen.
ICON/
INDICATOR
ICON/
INDICATOR
DESCRIPTION
DESCRIPTION
Multitasking
Silent profile in use
Network signal strength
(number of bars will vary)
Vibration profile in use
Call Forwarding activated
EDGE in use
1
No network signal
Remaining battery life
Battery empty
Roaming
Flight Mode is on
New text message
New voicemail
Bluetooth is active
Background music playing
Background music paused
An alarm is set
Ring profile in use
Ring & Vibrate profile in use
Ring after Vibrate profile in use
12
General Functions
Making International Calls
1. When entering a phone number, touch and
Making a Call
1. Make sure your phone is powered on.
hold
and the international access
2. Touch
and enter a phone number using
character ‘+’ will appear.
the touch dialpad. To edit a number on the
display screen, simply touch the
to erase one digit at a time.
2. Enter the country code, area code, and the
phone number.
key
3. Press the
[SEND] key or touch
]Press and hold the
entire number.
key to erase the
Call
on the touch dialpad to call the
number.
3. Press the
[SEND] key or touch
Call
on the touch dialpad to call the
Ending a Call
When you have finished a call, press the
number.
End call
[END] key or touch
.
Making a Call with the Send Key
1. Press the
numbers for the most recent missed, dialed,
and received calls will be displayed.
[SEND] key, and the phone
Making a Call from the Contacts
You can store frequently called names and
phone numbers in the SIM card as well as in
the phone memory.
2. Touch the desired number.
3. Press the
[SEND] key or touch
You can dial a saved number by simply
touching a name in the Contacts List and
Call
.
pressing the
[SEND] key or touching
Call
.
14
General Functions
Answering a Call
Adjusting the Volume
During a call, if you want to adjust the
earpiece volume, use the side volume keys
of the phone.
When you receive a call, the phone rings and
the phone icon appears on the screen. If the
caller can be identified, the caller’s phone
number (or name if stored in your Address
Book) is displayed.
In the standby screen, you can adjust the ring
volume using the side volume keys.
1. Press the
[SEND] or touch
.
If Any Key has been set as the Answer
Mode, any key press will answer a call
except for the
[END] key,
and
Setting Profiles
.
Press either of the side volume keys. You can
set your Ringtone a range of volume levels,
Vibrate All, Alarm Only, or Silent All.
2. End the call by pressing the
[END]
End call
key or touch
.
nNote
You can answer a call while using the Address
Book or other menu features.
15
General Functions
You can also adjust the touchtone sound and
vibration volume from the Touch tab.
Vibrate only Mode (Quick)
Vibrate only Mode can be activated by
touching and holding
from the touch
dialpad. You can also set Vibrate only Mode
by pressing and holding the down volume key.
16
General Functions
The phone will display “Vibrate only” On. If
you would like to turn Vibrate only Mode off,
Entering Text
You can enter alphanumeric characters by
using the phone’s touch pad. For example,
storing names in the Address Book, writing a
message, or scheduling events in the calendar
all require text to be entered.
touch and hold
again.
Changing the Text Input Mode
You can change the text input mode by
touching the Text Input Mode toggle button
on the touch screen.
The following text input modes are available
on the phone:
ABC Mode
Signal Strength
This mode allows you to enter letters by
touching the key labeled with the required
letter once, twice, three, or four times until
the letter is displayed.
If you are inside a building, moving near
a window may give you better reception.
You can see the strength of your signal by
the signal indicator on your phone’s display
screen.
17
General Functions
1. When you are in the T9 predictive text input
mode, begin entering a word by pressing
123 Mode (Numbers Mode)
Type numbers using one keytouch per number.
To change to 123 mode in a text entry field,
the touch screen keys
to
.
Press one key per letter.
touch
.
]The word changes as letters are typed
- ignore what is displayed on the screen
until the word is typed completely.
Using the Symbol Mode
The Symbol Mode enables you to enter
various symbols or special characters. To
]If the word is still incorrect after typing
enter a symbol, touch
desired symbol.
. Then select the
completely, press
on the pop up
menu to see the options. Then select the
word you want by touch.
Using the T9 Mode
]If the desired word is missing from the
The T9 predictive text input mode allows you
to enter words easily with a minimum number
of key presses. As you touch each key, the
phone begins to display the characters that
it thinks you are typing based on a built-in
dictionary. As new letters are added, the word
changes to reflect the most likely candidate
from the dictionary.
touching
.
18
General Functions
nNote
To delete letters, touch
. Touch and hold
down
to erase the entire text entry.
Refer to the table below for more information
on the characters available using the keys.
nNote
Pressing the
unsaved message in the Drafts folder.
Touch
change text entry mode from Lower Case to
Upper Case, touch twice and the key will
to input an Upper Case letter. To
[END] key will save your
turn to an orange color - indicating that Caps
Lock has been activated.
Using the ABC Mode
Use the touch pad keys to enter your text.
Characters in the Order Display
Key
1. Touch the key labeled with the desired
letter:
Upper Case
. , ' @ ? ! - : / 1
A B C 2
Lower Case
. , ' @ ? ! - : / 1
a b c 2
1
2
3
4
5
6
7
8
9
]Once for the first letter.
]Twice for the second letter.
]And so on.
D E F 3
d e f 3
G H I 4
g h i 4
2. To insert a space, touch
. To delete
J K L 5
j k l 5
letters, touch
. Touch and hold to
erase the entire text entry.
M N O 6
P Q R S 7
T U V 8
m n o 6
p q r s 7
t u v 8
W X Y Z 9
w x y z 9
Space Key,
0 (Long press)
Space Key,
0 (Long press)
0
19
General Functions
Using the 123 (Numbers) Mode
Using the Korean Mode
The 123 Mode enables you to enter numbers
in a text message (a telephone number,
for example) more quickly. Touch the keys
corresponding to the required digits before
manually switching back to the appropriate
text entry mode.
Allows you to type in Korean when you set
the language to Korean.
When you use Touch Keypad
Allows you easily input the letters. To input
,
touch
and touch
. To input , touch
and touch
.
T9 Dictionary
The T9 Dictionary is a feature that allows the
user to add any unique or personal words to
the T9 standard language database. The T9
Dictionary function can be selected from the
Text Entry Settings by using Options
.
Within the T9 Dictionary function, the user
can add, modify, delete, or reset personal
words.
nNote
You can select a different T9 language from
the same Options menu. T9 mode is disabled
by default.
20
Address Book
From the standby screen, touch
and
touch
. You will see following Address
Book’s submenus.
Contact List
This menu allows you to save and manage
contact address information. The Contact
List's functions allow you to add a new
address or search saved contact addresses
by name. To search a contact, touch
and
input the contact person’s name. If you input
‘At’, it will show all contacts beginning with
‘At’ in their name. From the standby screen,
you can directly search for a contact by
touching
and
.
]
]
: Search a contact.
: Shows your contacts by first letter/
character.
21
Address Book
2. Touch
to set a Picture ID for a contact
New Contact
by using a saved picture from Pictures or
taking a new picture of the contact person.
Choose from No Picture, Picture, or Take
New Picture. After you take a new picture
of the contact person, touch
an area of the picture, then touch Set to
This menu allows you to add a new contact
address. You can enter contact address
information, including: name, phone numbers,
email addresses, group information, pictures,
ringtone, and a memo.
to select
set the picture as the Contact Picture ID. To
delete the picture ID, touch
and choose
No Picture.
]Enter the first name, last name, or both.
]Enter up to five different numbers. Touch
and you can set that number as a
Speed Dial.
]Enter an email address.
]Select a group for the contact.
]Set the ringtone for the contact or leave it
as the default ringtone.
1. From the standby screen, touch
touch
and
.
]Add a memo if necessary.
]Choose whether to save the contact to your
Phone or SIM Card memory.
3. Touch
to save the contact.
22
Address Book
]Your Voicemail is already set to speed
dial 1. This is a default setting and cannot
be changed. Touch the number you wish to
assign a speed dial contact.
Groups
This menu allows you to manage group
information. By default, there are 5 groups:
Relatives, Friends, Colleagues, School, and
VIP. Or you can put a contact in No group. You
can also configure a ring tone for a group so
that the group ring tone sounds when a call
from a specific contact address within that
group is received (and there is no ring tone
configured for the specific contact address).
Speed Dials
You can assign a frequently-called contact
to a speed dial list. You can select a number
from 2 to 9 as a speed dial. You can configure
a speed dial number for a specific contact
address to any of the 8 numbers.
]This will open your address book. Touch
the contact you would like to assign to
that number. Then touch
number to the speed dial.
to assign the
]To call an assigned speed dial number,
touch from the standby screen. Then
touch and hold the assigned number; the
call will be placed to the assigned number
automatically.
23
Address Book
1. From the standby screen, touch
to open the Options menu and select
Service Dial Numbers.
, touch
SIM Management
This menu allows you to copy information
from your SIM card, e.g. name, handset
number, etc., to your handset. If a name is
duplicated during the copying operation, the
information is also duplicated.
2. The names of the available services will
be shown.
3. Touch a service number. Press the
[SEND] key.
You can also copy entries from the handset
memory to the SIM card (not all the data will
be copied).
My Info
This displays your own phone numbers stored
in your phone/SIM card. You can edit its name
From this menu, you are also able to delete
entries in the SIM card.
From the standby screen, touch
, touch
and number by touching
or you can
to open the Options menu and select
choose
to send the information.
SIM Management.
From the standby screen, touch
, touch
to open the Options menu and select
My Info.
Service Dial Numbers
You can view the list of Service Dial Numbers
(SDN) assigned by your network provider.
Such numbers could include the emergency
services, directory assistance, and voicemail
numbers.
24
In-Call Menu
Your phone provides a number of control
functions that you can use during a call. To
access these functions during a call, touch
.
Swapping Between Two Calls
By using one of the two methods below, you
can switch between two on-going calls.
• Press
[SEND] key.
• Touch
.
During a Call
Answering an Incoming Call
To answer an incoming call when the handset
is ringing, simply press the
or touch
The menu displayed on the handset screen
during a call is different from the default main
menu displayed when in the standby screen.
These options are described below.
[SEND] key
. The handset is
also able to warn you of an incoming call
while you are already on a call. A tone will
sounds in the earpiece, and the display will
show that a second call is waiting. This
feature, known as Call Waiting, is only
available if your network supports it.
Making a Second Call
You can select a number you wish to dial to
make a second call.
• Press
and press
, enter the 2nd phone number,
.
If Call Waiting is turned on, you can put the
first call on hold and answer the second call
or
• Press
to select a contact from your
Address Book and then press the Call button
.
by pressing the
[SEND] key or touching
.
25
In-Call Menu
Rejecting an Incoming Call
You can reject an incoming call without
answering by simply pressing the
Video Share Calling
Making a Video Share Call
[END]
You can make or answer a Video Share call
with other 3G video phones. In order to start
a Video Share call, both sides must have a 3G
Video Share capable phone and both must be
in a 3G coverage area.
key or touching
.
Muting the Microphone
You can mute the microphone during a call by
touching . The handset can be unmuted
by touching
again. When the handset is
nNote
muted, the caller cannot hear you, but you can
still hear the caller.
Before you start a Video Share Call, you must
check the following:
Using the Speakerphone
• Phone must be in an AT&T 3G service area.
You can use the integrated Speakerphone
during a call by touching . The loudspeaker
is automatically deactivated when you end
the call.
nWarning
Due to increased volume levels, do not place
the phone near your ear while the speakerphone
is enabled.
26
In-Call Menu
To initiate Video Share follow these
steps:
nNote
The Speakerphone will be automatically
activated when a Video Share session begins,
unless a hands-free device (Bluetooth® or stereo
headset) is connected.
1. Make a phone call by dialing a number or
selecting a number from the Address book.
Or you can make a video share call directly
from the Recent Call or Contact List by
touching a call or contact, then touching
and selecting Video Share (in Recent
Calls) or Video Share Call (in Contact
List). Select the type of Video Share (Live or
Recorded). In this case skip steps 2-3.
• Live: Share a real-time video stream with the
other party.
• Recorded: Share a pre-recorded video
clip with the other party. (Note that H.263
& Mpeg4 video formats in 176x144 size is
supported)
4. If the other party accepts the Video Share
invitation, the Video Share session will
begin. (After accepting, it may take several
seconds before the actual Video Share
starts.)
2. A few seconds after the connection is
established, a "Video Share" prompt will
appear on the screen once the other party
is ready to use the Video Share service. If
the Audio Alert in the Video Share setting
During a Video Share call, you can do the
following by touching the icons below:
Speaker Speaker
(see Application Setting) is set to
,
an audio alert will sound along with the
prompt.
]
]
]
/
: You can turn on/off the
on
off
Speakerphone.
3. To Share Video with another party, touch
Video Share
the
or press the Camera
Mute
Unmute
/
: You can mute/unmute
key and select the video type (Live or
Recorded).
the microphone.
Stop
: You can stop a Video Share call
and proceed to a Voice call.
27
In-Call Menu
You can choose from the following:
]Hold Call: You can hold the phone call by
selecting ‘Hold Call’. (Note: Video Share
will stop when you select ‘Hold Call’)
]Brightness: Allows you to adjust the
brightness of the video.
During the Video Share session, turn the
speakerphone on/off using the ‘Speaker off’ /
‘Speaker on’ key.
]Zoom: Allows you to zoom in/out the video.
]Start recording/Stop Recording: You can
start recording the live video by selecting
‘Start recording’. Once you are recording
the video, you can stop recording by
selecting ‘Stop Recording’.
nNote
Recorded video clip will be saved in My Stuff
> Video.
]Use Phone Speaker/Use Bluetooth
Headset: When ‘Use Bluetooth Headset’ is
selected, you can have a conversation using
Bluetooth®. When ‘Use Speaker Phone’ is
selected, you can have a conversation using
either speakerphone or handset.
5.1. Stop a Video Share call and proceed to a
voice call by
1. Touching
Stop
5.2. End a voice call along with the Video
Share call by
1. Pressing
2. Touch
Key
and then
]End Call: You can end the phone call by
selecting ‘End Call’. (Note: Video Share will
stop as well)
End call
28
In-Call Menu
nNote
Answering a Video Share Call
1. A Video Share call will be terminated in the
following cases:
Accept
1. To start a Video Share Call, touch
when you receive a prompt stating that the
contact wants to Video Share with you.
Decline
• When trying to make a conference call/
second call during a Video Share call.
Touch
to decline the Video Share
• When the voice call is placed on hold.
• When the voice call is disconnected.
call. (Note that after accepting the call, it
may take several seconds before the Video
Share session starts.)
• When moving out of an AT&T 3G service
area.
You can choose from the following:
• When the network connection is poor.
]Landscape mode: When Landscape mode
is selected you can watch shared video in
landscape mode.
2. A Video Share call will be unavailable in the
following cases (“Video Share” message will
not appear).
]Use Speaker Phone/Use Bluetooth
Headset: When ‘Use Bluetooth Headset’ is
selected, you can have a conversation using
Bluetooth®. When ‘Use Speaker Phone’ is
selected, you can have a conversation using
either speakerphone or handset.
• When trying to make a conference call/
second call during a Video Share call.
• When the voice call is placed on hold.
• When moving out of an AT&T 3G service
area.
nNote
The speakerphone will be automatically
turned on when a Video Share call begins, and
automatically reverts back to the previous mode
when a Video Share call ends.
29
In-Call Menu
Saving your Video Share
Making a Video Share Call from
the Video Recording Mode or
Video Player
The sender can record video during the Video
Share session by
1. Touching
recording during a live Video Share call.
, then touching Start
When you are Recording Video, you can easily
make a Video Share call to a person in your
Contact List.
2. Setting Auto Record to ‘ON’
(see Application Settings).
1. Start Video Share call as follows:
Sender can save the recorded video by
]In Record Video Mode, touch
]In Video Player, touch
.
1. Touching
, then touching Stop
.
Recording during a live Video Share call.
nNote
2. Ending Video Share call.
This menu item is active only in 3G coverage
areas and on Video Share capable devices.
Recorded video will be saved in My Stuff
> Video.
If the other party is not ready for Video Share,
the call will proceed to an ordinary voice call.
30
In-Call Menu
Making a Second Call
Conference Calls
You can make a second call while currently
on a call simply by accessing the dialpad,
from the In-Call Menu, entering the second
The conference service provides you with the
ability to have a simultaneous conversation
with more than one caller. The conference
call feature can be used only if your network
service provider supports this feature.
number, and pressing the
[SEND] key.
When the second call is connected, the first
call is automatically placed on hold. You can
swap between calls by pressing the
[SEND] key.
Once a conference call is set up, calls may
be added, disconnected or separated (that
is, removed from the conference call but still
connected to you) by the person who set up
the conference call. These options are all
available from the In-Call menu.
Setting Up a Conference Call
To set up a conference call, place the first
call. Once that is connected, follow the steps
above to make a second call. You can then
join the two separate calls by touching
and touching Join Calls.
The maximum number of callers in a
conference call is five. Once started, you are
in control of the conference call, and only you
can add calls to the conference call.
31
In-Call Menu
Placing the Conference Call on
Hold
To place a conference call on hold, press the
key.
Ending a Conference Call
The currently active conference call can be
disconnected by pressing the
key.
Adding Calls to the Conference
Call
To add a call to an existing conference call,
touch
to place the Conference Call
on hold, then touch Dialpad to access the
dialpad, and enter the number. Once the call
is connected, touch
to merge the calls.
Private Call in a Conference Call
To have a private call with one caller from a
conference call, touch
.
When the numbers of the callers are
displayed, select
for the one you wish
to speak in private with. Only the person who
initiates the Conference Call can initiate a
Private Call.
32
Your Standby Screen
From here you can access all menu options,
make a quick call, and view the status of your
phone - as well as many other things.
]When the screen light is off, press the
key on the top side twice to
restore the standby screen.
]Don’t cover the phone with a case or cover
as the touch screen will not work with any
material covering it.
Touch Screen Tips
The standby screen is also a great place to
get accustomed to the touch screen.
To select an item, touch the icon accurately.
Your
can be set to vibrate
slightly when it recognises you’ve touched
an option.
To scroll through lists, touch the last item
visible and slide your finger up the screen.
The list will move up so more items are
visible.
]There’s no need to press hard, the
touchscreen is sensitive enough to pick up
on a light yet firm touch.
]Use the tip of your finger to touch the
option you require. Be careful not to touch
any other keys.
33
Your Standby Screen
The Quick Keys
The quick keys on your standby screen provide easy, one-touch access to your most used
functions.
Touch to bring up the touch
dialpad to make a call. Input the
number as you would using a
normal key pad and touch
AT&T
or press the
key.
Touch to open your contacts and
search for the number you want
to call. You can also create new
contacts and edit existing ones.
Touch to access the Messaging
menu. From here you can create
a new outgoing message.
Quick keys
Touch to open the main menu. All
of your phone’s functions can be
accessed through the main menu
and its sub-menus.
34
Your Standby Screen
Widget
Favorite
Allows you to use Widgets and even add
them to your standby screen.
Allows you to easily contact your friends and
family by displaying your favorite contacts on
the standby screen.
]Touch
to open the Widget List.
]First, touch
from the standby screen.
]Drag a Widget from the list onto the
standby screen. This will enable you to use
Widgets.
AT&T
]You can play songs, add memos, check the
calendar, play slideshows, set an alarm, or
add events directly from the standby screen.
]Touch
to close the Widget List.
AT&T
]Select
to choose a contact. You can
choose up to 30 contacts for one page.
Touch the contacts you would like to add
and then touch Add.
AT&T
Widgets
35
Your Standby Screen
]If you want to delete a contact from this
]Touch
to finish editing the
screen, touch the
at the top right corner
contacts on this screen. Then to access
your contacts, simply touch on their
corresponding icon. Touch
of the contact icon.
to call,
to send a message,
to
AT&T
check message received from that person,
and
to check the call history from that
person.
AT&T
]If you want to edit one of the contacts,
touch the picture icon and the View screen
will come up. Then press
contact.
to edit the
36
Your Standby Screen
Annunciator
Shortcuts
With
’s Annunciator, you
Add your favorite menu on the standby
screen.
can quickly connect to the Music Player,
Bluetooth, and more.
]Touch to edit the items on the screen.
Touch the top side of the standby screen.
AT&T
]Touch
touch to delete the application from
Shortcuts, or touch to finish.
to add another application,
]You can use Music Player to play music or
turn on Bluetooth.
37
Your Standby Screen
]You can set your profile by touching
You can set your profile to Ring, Ring
and Vibration, Ring after Vibration,
Silent, and Vibration.
.
]To send a text message, touch
.
To send an email, touch
To check Voicemail, touch
.
.
]To use IM, choose from
.
]If you want to set an Alarm, touch
]To view the Calendar and add new events,
touch
.
.
38
Menu Tree
Touch
in the standby screen to open the Main Menu. From here, you can access the
following sub-menus: Communications, Find, Entertainment, and Tools & Settings.
Communications
Dialing
Find
Mobile Web
Address Book
AT&T Social Net
Messaging
YPmobile
AT&T Navigator
Where
Mobile E-mail
IM
My Account
My-Cast Weather
Wikimobile
Shop GPS
Recent History
PicDial
Tools & Settings
Call
Entertainment
AppCenter
AT&T Music
MobiTV
Bluetooth
Sound
Display
Tools
AllSport GPS
Games
Touch
Applications
Camera
Date & Time
More
My Stuff
39
Messaging
This menu includes functions related to SMS
(Short Message Service), MMS (Multimedia
Message Service), Voicemail, and network
service messages.
Editing a message
The following options are available when
editing a message.
]Symbol: You can insert symbols ranging
from sentence notes to emoticons. Touching
New Message
1. In the standby screen, touch
the
you want. You can use
scroll through the various pages of symbols.
twice, you can select the symbols
and to
.
2. Touch Create new message.
nNote
If you attach a graphic or an audio file while
writing a multimedia message, the file loading
time can take up to 5 seconds. You will not be
able to activate any key during the file loading
time. When the file loading is complete, you
will be able to write a multimedia message.
40
Messaging
Inserting Multimedia files in outgoing
]Record New Audio: You can insert a new
audio clip taken by the Voice Recorder.
messages is easy. Touch
option from below:
and select an
• Record Mode: MMS mode record time is
]Picture: You can preview the selected
about 5 minutes.
picture by touching the portion of the
thumbnail that does not include
Touch to attach the picture in the
preview state.
• Storage: You can assign the default
storage to Handset or External memory.
.
]Record New Video: You can record a
new video to insert to the message. The
options are similar to those when inserting
a new picture.
]Audio: You can insert a file from your
saved Audio files.
]Video: You can insert a file from your saved
Video clips.
]Take New Picture: You can insert a new
image taken from the camera.
nNote
Refer to page 74 for camera options.
41
Messaging
]Template
Using Options
Preset multimedia templates are available.
Touch
to use the options below.
]More: Allows you to insert Subject, vCard,
vCalendar, vNote, vTask, or Contact.
• Text Entry Settings
- Text Entry Language: Allows you to
set the text entry language to English,
Français, Español, or Korean.
nNote
vCard, vCalendar, vNote, vTask, and Contact
are created by the Address Book, Calendar,
Notepad, and Tasks functions. Go to the
corresponding sections for more detailed
information.
- Show/Hide Word Candidate: When
in T9 Entry Mode, you can see the word
candidates as you type.
- Next Word Prediction On/Off
- T9 dictionary: Here you can add,
delete, reset, and modify words to the T9
dictionary.
• Request Read Receipt: If this is set to
On, you can check whether your message
was read successfully.
42
Messaging
• Save to Drafts: Saves the selected
- Caller Groups: Displays Contact Groups.
message to Drafts.
- Recent Messages: Choose a contact
• Writing Font Size: Set the writing font
from recent messages.
size to Small, Medium, or Large.
- Recent Calls: Choose a contact from
• Cancel Message: Allows you to exit the
message without saving anything you have
entered.
recent calls.
- Delivery Options: Allows you to choose
from Request Read Receipt, Add Cc,
and Add Bcc.
Sending a Message
- Edit Message: Allows you to go back to
the message editing mode.
When you are ready to send the message,
touch
. Your Contact List will appear,
from which you can select a recipient for your
message. Enter the name(s) of the recipient(s)
in the Recipients field to search the Contact
List. If you wish to enter a new number or
email address as your recipient, touch
- Save to Drafts: Saves the selected
message to Drafts.
- Cancel Message: Allows you to cancel
the message.
and choose one of the following options:
- Text Entry Settings: This menu allows
you to set the text entry settings.
- Enter Number: Allows you to enter
the recipient(s) number using the touch
keypad.
- Enter Email: Allows you to enter an
email address instead of a phone number.
43
Messaging
Message folders
The folder structure on your
Inbox
You will be alerted when you receive a
message. All received messages will be
stored in the Inbox. In the Inbox, you can
identify each message by icons. To reach the
was designed to be fast and easy to use.
]Inbox: All the messsages you receive are
placed into your Inbox.
Inbox, from the standby screen, touch
.
]Drafts: If you don’t have time to finish
writing a message, you can save what
you’ve done so far here.
Touch a message to open it, then touch
for more options. Note that options
are different when viewing a message in
Standard and Conversation View.
]Outbox: This is a temporary storage folder
where messages are stored while being
sent.
nNote
If you see the message “USIM memory is full”,
then you should delete some messages from
your Inbox.
44
Messaging
]Forward: (For SMS) Allows you to forward
the message to another person.
Standard View
The following options are available in
standard view:
]Make voice call: (For SMS) Initiates a call
to the sender.
]Add to Address Book: (For MMS/SMS)
You can save the sender’s phone number in
the Contact List.
]Copy & Move: (For SMS) Allows you to
copy and move the message to the SIM
card or Handset.
]Select Slide: (For MMS) If the multimedia
message has more than one slide, you can
select and move to the desired slide.
Conversation View
This mode allows you to view all messages
with each contact in conversational order.
]Extract Data: (For MMS/SMS) If a
phone number or email address is in the
message’s text, the phone will identify it
and allow you to save it.
Expand All
Choose
choose
to see messages in detail or
for the simple view.
Collapse All
]View attachment: (For MMS) Allows
you to view and save each individual
attachment.
Drafts
You can view the messages saved as drafts.
To see the Drafts folder, touch from the
standby screen, then touch Inbox to open the
]Message Details: (For MMS/SMS)
You can view information about received
messages, such as Type, Subject, sender’s
address, and Time.
drop-down menu, then touch Drafts.
45
Messaging
]Delete: Allows you to delete messages.
Outbox
]Sort By: Sorts by Date, To, and Subject.
Outbox is a storage place for messages
waiting to be sent and messages sent
successfully. When you press the
[SEND] key, you can make a call to the
number of the recipient number of the
selected message.
]Message settings: Allows you to set
various message settings.
]Delete All: Delete all messages.
Those options are available when you choose
a message in Outbox.
If the message is not sent from the Outbox,
you will receive a sound alert along with
a Message Sending Failure notice on the
screen. Another attempt will be made to
send the failed message and after two
unsuccessful attempts, the message will no
longer be sent automatically. In order to send
the message that has failed, you must touch
to resend the message.
]View Status: Displays the message status
as Failed, Sent, or Error.
]Edit: Allows you to edit the selected
message.
]Select Slide: If the multimedia message
has more than one slide, you can select and
move to the desired slide.
]View attachment: Allows you to view the
attachment of the message.
The Outbox folder saves the most recent sent
messages in chronological order. Touch
use the following options available:
to
]Message Details: Allows you to view
information about sent messages, such as
Type, Subject, sender’s address, and Time.
46
Messaging
- Delete: Allows you to delete the selected
template message.
Message settings
To configure Messaging settings, touch
from the standby screen,
Message settings.
- Delete All: Deletes all messages in the
folder.
, then touch
To edit an existing Template, touch it (to
open), then touch the text. The Edit screen
will automatically open.
Message Alert
Allows you to set the message alert sounds,
volume, and alert type.
]Text Message center: The details for the
Message Center are pre-loaded onto your
handset and should not be changed.
Save To
Allows you to choose between saving the
message to the Phone or SIM Card.
]Email Gateway: The details for the Email
Gateway are pre-loaded onto your handset
and should not be changed.
Signature
]Message Subject: Allows you to activate
or deactivate the Subject field in an SMS.
This feature allows you to create a signature
to send with outgoing messages. You can use
symbols, templates, and contacts as part of
the signature.
]Insert Signature: Allows you to insert
the signature you created to outgoing
messages.
Text Message
]Text templates
There are 9 predefined messages in the
list. You can view and edit the template
messages or create new ones.
The following options are available when
you touch
:
47
Messaging
]Download Options
Multimedia Message
- Download Without Asking: Allows
Multimedia Messages to be downloaded
automatically.
]Multimedia Templates: Allows you to
create and edit multimedia templates.
]Priority: Allows you to set the priority level
to Low, Normal, or High.
- Ask Always: Allows you to download a
multimedia message manually.
]Message Subject: Allows you to activate
or deactivate the Subject field in an MMS.
- Discard: Used when the user rejects
download of the Multimedia Message.
]Validity Period: This network service
allows you to decide how long your
multimedia messages will be stored at the
message center.
]Message Center: The details for the
Multimedia gateway are pre-loaded onto
your handset and should not be changed.
]Send Delivery Receipt: Allows you to
send a delivery confirmation alert for a
Multimedia Message.
Voicemail Number
This menu allows you to set the voicemail
center number if this feature is supported by
AT&T. Please check with AT&T for details of
their service in order to configure the handset
correctly.
]Send Read Receipt: Allows you to send
a message read confirmation alert for a
Multimedia Message.
Service Message
You can set the Service Message option to
determine whether or not you will receive
service messages.
48
Communications
3. To save your password, scroll down to
Remember Me (Save password) and
touch it to check the box.
Mobile Email
Mobile Email allows you to access your
Yahoo! Mail, AOL Mail, AIM Mail, Windows
Live Hotmail, AT&T Mail, Gmail, and Other
Providers accounts on your phone. Now you
can quickly and easily check your email while
you are away from your computer.
4. Touch Sign In.
]Opening an Email: Scroll down and touch
the email to highlight the message you
want to open, then touch again to open
the message. When the email is open,
touch Options to reply, forward, delete,
and more.
To Set Up Mobile Email
]Open Mobile Email: From the standby
screen, touch
and then touch
.
]Deleting an Email: Scroll down to the
email you want to delete, touch the subject
line to highlight it, touch Options, touch
Delete, and touch Delete once again.
]Select an Email Provider: Touch the
email provider you wish to use.
]Read and Accept the Terms of Use
]Log In
1. Touch the user ID/email address field and
enter your information.
2. Touch the Password field and enter your
password.
Quick Tip: Your password is case
sensitive.
49
Communications
Offline Menu
]Sign In: This allows users to login by filling
in the User ID and Password.
IM
The Instant Messaging feature can only be
used with the support of the network operator
or communities such as AIM®, Windows
Live™, and Yahoo!® Messenger. For Instant
Messaging users, a valid User ID, and
Password will be required in order to login
and exchange messages as well as checking
the online status.
nNote
Once the User ID and Password are saved, you
will not be required to type them in again during
the Login process. This feature is optional.
]Saved Conversations: Allows you to view
saved conversations.
To access the IM feature
]Offline Conversations: Allows you to
view offline conversations.
1. Touch
and then touch
.
2. You can see available IM clients. The menu
items below might not appear as not all IM
communities support the various options.
In addition, the menu strings may appear
differently. This depends on the selected
IM communities. The keywords such as
User ID, Login, and Contact will be used
as general terms in IM menus according to
the currently selected communities such
as AIM®, Windows Live™, and Yahoo!®
Messenger
Settings
]Set Sound: Allows you to turn alerts
On/Off for a Contact when they have
activity on their session.
]Network: You may check your Network
Profiles and Server Address information.
50
Communications
IM Information
General Options
This displays the Instant Messaging Client
Information such as Client Name and Version
Number.
Touch
to view the following options:
Online Menu /
1-to-1 conversation
After a successful Login, a list of contacts
with Screen Names will appear on the screen.
Touch and hold each item, it will show various
menu pop up.
]My Status: Allows you to set your status
to Available, Away, or Invisible.
51
Communications
]Add a Contact: Allows you to add a
new contact to the selected contacts list;
contacts are searched on the basis of
Screen Name.
Touch and hold a conversation.
]Send Message to: Allows you to send a
message to someone by entering a Screen
Name.
]Block List: Displays the list of all blocked
Contacts.
]Saved Conversations: Allows you to view
saved conversations.
]Settings:
]End Conversation: This closes the
selected conversation. If an unknown
contact was selected, that contact is
deleted.
- Display Name
- My Status: Allows you to set your status
to Available, Away, or Invisible
]Block/Unblock: This allows you to block/
unblock the selected Contact.
- Offline Contacts
- Set Sound: Allows you to turn alerts On/
Off for a Contact when they have activity
on their session
]Buddy Info: This allows you to view the
User ID and Status information.
- Auto Sign In
52
Communications
Touch and hold a Contact List.
Touch and hold a Contact.
]Refresh: This refreshes the current
information on the contacts within the list.
]Delete Buddy: This deletes the selected
contact.
]Block/Unblock: This allows you to block/
unblock the selected Contact.
]Set Alert : This allows you to set an alert.
]Buddy Info: This allows you to view the
User ID and Status information.
53
Communications
]Settings:
Menu options available in the
Conversation screen
]Insert: Allows you to enter emoticons and
- My Status: Allows you to set your status
to Available, Away, or Invisible.
text templates in the conversation screen.
- Away Message
]Back to List: Allows you to go back to
your contact list.
- Set Sound: Allows you to turn alerts On/
Off for a Contact when they have activity
on their session.
]Block/Unblock: This allows you to block/
unblock the selected Contact.
- Auto Sign In
]Save Conversation: Saves the currently
active conversation.
]Minimize: Minimizes the IM window and
returns to standby mode.
]End Conversation: This ends the active
conversation and clears the conversation
buffer.
]Sign Out: Signs you out of the IM client.
nNote
• The maximum number of characters
supported by a message is 512 characters for
receiving, and 159 characters for sending.
]Extract: If a phone number or email
address is in the message’s text, the phone
will identify it and allow you to save it.
• The current information might not update
in real time so the “Refresh List”/”Refresh
Contact” option can be used for the most up
to date status.
54
Communications
PicDial
PicDial allows you to share your online profile
picture and status, or any picture you choose,
as your Caller ID.
When you change your picture or status, it is
automatically updated on your friends’ phone.
You can also get photos automatically for
your contacts.
To access PicDial
1. Touch
touch
from the standby screen. Then
.
2. Touch Accept to accept the Terms and
Conditions.
3. Touch Next.
4. Enter your phone number and name.
5. After the phone verifies and creates your
account, choose your social networking
sites and enter your login information. Then
touch Next.
6. Follow the prompts to configure the
application to your personal needs.
55
Mobile Web
Mobile Web
This application connects you to the Internet.
You are connected to AT&T’s homepage by
default.
This menu shows how to access the Internet
by launching the mobile browser.
Mobile Web is one of the services provided by
AT&T and it gives you access to all the cool
things you can do with your wireless phone.
nNote
Check the availability of mobile browser
services, pricing, and tariffs with your network
operator and/or the service provider whose
service you wish to use. Service providers will
also give you instructions on how to use their
services.
Please contact your service provider to open an
Internet account.
To launch the browser from the standby
screen, touch
,
, and then
.
Once connected, the homepage is displayed.
To exit the browser at any time, press the
key.
56
YPmobile
Unleash the power of YELLOWPAGES.COM
local search on your mobile phone.
Find a business, get maps and directions, and
save your favorites - our mobile app gives
you what you need, whenever and wherever
you need it.
]Search for local businesses.
]View ratings and call businesses.
]Save businesses for future access.
]Get maps and view step-by-step directions.
* For more information, refer to
www.yellowpages.com
To access YPmobile
From the standby screen, touch
and
,
,
.
57
AT&T Navigator
To access AT&T Navigator
]A Search feature that allows you to find
businesses or points of interest near your
current location, an airport, a waypoint, or
any other entered address. You can read
ratings and reviews for businesses and
easily call the business that you have found
to check on the availability of an item or to
make a reservation. You can navigate to the
business location now or save the address
for later use.
From the standby screen, touch
and
,
,
.
The AT&T Navigator application on your
device uses GPS position determination
technology and access to your carrier’s data
network to provide you with driving directions
and a host of other services, including:
]GPS navigation that gives you turn-by-turn
directions to any destination address in
the continental United States. If you miss
a turn or get off-track, AT&T Navigator
will calculate a new route for you. You can
enter a destination address by using AT&T
Navigator’s automatic voice recognition
system or by typing on the device’s keypad.
]Maps of the area around your current
location, around a marked waypoint, or
around an address that you had previously
entered. You can pan the map (adjust left,
right, up, or down) and zoom in or out.
You can also mark a point under the cursor
as a waypoint.
]Audio and visual traffic alerts while driving
or viewing maps, as well as traffic re-
routing capabilities to minimize delays on
your trip.
]A compass-like indicator presenting your
direction of travel, location, and speed.
58
AT&T Navigator
]The ability to personalize your application
preferences by selecting U.S. customary
or metric distance units, the language for
audible guidance, and more.
nNote
For best GPS performance.
• In order to improve GPS antenna sensitivity,
do not cover the GPS antenna area of the
device.
You can also use many of AT&T Navigator’s
features on the TeleNav website, such as
getting driving directions (Route Planning) and
using the Search function to find businesses,
churches, schools, and government offices.
You can also use the TeleNav website to add
an address to your My Favorites list, manage
your My Favorites and Recent Places lists, and
shop at the TeleNav Store.
• Your GPS antenna sensitivity might be
weakened if you are in a high rising building,
underground, or location surrounded by metal
or concrete.
• Use near the window indoors for better GPS
antenna sensitivity.
• For battery durability, please use vehicle
power adapter in your car.
• It could take 2~3 minutes to get your GPS
position depending on the condition of the
environment or network.
59
Find
Where
My-Cast Weather
This application allows you to get up-to-date
weather information, including radar & map
images, the forecast, and more!
Where uses your location to help you find
places, things to do, and local information
when you’re on the go. Once you decide on
your destination, Where makes it easy to get
there with maps and directions.
To access My-Cast Weather
From the standby screen, touch
and
,
,
To access Where
.
From the standby screen, touch
and
,
,
.
Wikimobile
Wikimobile allows you to access to Wikipedia
articles, including the article pictures and
quick facts, on your mobile phone. You can
bookmark your favorites for quick and easy
access.
To access Wikimobile
From the standby screen, touch
,
,
and
.
60
AppCenter
To launch AppCenter, from the Standby screen
Cool Tools/Apps
touch
and then choose
from the
This menu option connects to AT&T’s
application download site. This allows you
to download the various applications by
connecting to the Internet.
Entertainment tab.
Ringtones
This menu option connects to AT&T’s ringtone
download site.
nNote
Additional charges may incur when
downloading applications. Contact AT&T for
additional information.
nNote
Additional charges may incur when
downloading ringtones. Contact AT&T for
additional information.
Videos
This menu option connects to AT&T’s video
download site.
Games
This menu option connects to AT&T’s game
download site. This allows you to download
the various games by connecting to the
Internet.
nNote
Additional charges may incur when
downloading applications. Contact AT&T for
additional information.
nNote
Additional charges may incur when
downloading games. Contact AT&T for
additional information.
61
AppCenter
Color Graphics
This menu option connects to AT&T’s graphics
download site.
nNote
Additional charges may incur when
downloading graphics. Contact AT&T for
additional information.
Answer Tones
This menu option connects to AT&T’s Answer
Tones download page. This allows you to
shop for the newest, most popular Answer
Tones.”
MEdia Net Home
This connects you to your MEdia Net Home
page.
62
AT&T Music
To launch AT&T Music, from the Standby
nNote
screen touch
and then touch
in the
Copyrights of music files may be protected by
copyright and intellectual property laws. Please
ensure that you adhere to the applicable Terms
of Use of materials laws prior to downloading or
copying files. Music protected by Digital Rights
Management software may not be playable.
Entertainment tab.
Music Player
]All Songs: The songs in your music library
will be displayed.
Playing Music
Touch All Songs for the drop-down menu
To listen to music in your phone or the
external memory, follow these quick easy
steps:
with the following options:
- Playlists: Allows you to access or make
your own playlists.
1. From the Standby screen, touch
, touch
- Artists: Shows the list of artists of all the
songs in your music library; touch an entry
to see all the songs by the artist.
from the Entertainment tab.
2. Touch Music Player.
- Albums: Shows the list of albums of all
the songs in your music library; touch an
entry to see all the songs on the selected
album.
- Genres: Shows the list of genres of all
the songs in your music library; touch an
entry to see the songs from that genre.
- Shuffle: Touch this option to play your
songs in a random order.
63
AT&T Music
3. Touch All Songs to select Playlists, Artists,
Albums, or Genres. You can also select
Shuffle to play all your songs in a random
order. The Now Playing menu (below) will
become available once music is playing.
nNote
Music files smaller than 300kb may not
be displayed in this function and may be
categorized as Ringtones.
Adding Music To Your Handset
Music files can be added to your handset by
using one or more of the following methods:
]Download music and ringtones over the
AT&T network directly to your device via the
Shop Music link in the AT&T Music Folder.
]From your existing digital media collection
on your PC; synchronized via Windows
Media® Player and/or Windows Explorer.
]From your PC using other music subscription
services, such as Napster or eMusic.
]Touch
While playing, touch
volume. Touch
the next song or previous song.
]Touch to back out of menus without
disrupting the music.
to pause the selected song.
to adjust the
to skip to
and
64
AT&T Music
Purchasing and downloading
Music directly to your Device
Transferring Music using your
PC
1. Touch
Entertainment tab.
2. Select Shop Music.
then touch
in the
Before You Get Started
To transfer music from your PC to your device,
you will need the following:
3. Navigate the Shop Music page to
download today’s hottest music and other
personalized content directly to your phone.
]Windows Media® Player 10 (or above) or
other digital music management software
such as Napster® or eMusic®.
]A microSD™ card*
(Up to 16GB supported)
nNote
• These actions are data intensive (i.e.
previews via streaming) so the user should
be enrolled in an unlimited data plan before
using these services to avoid per-use data
charges.
]USB data cable*
* microSD card and USB data cable sold
separately; go to att.com/wireless for
details.
• Additional charges may apply when
downloading music, ringtones etc.
nNote
• .mid, .wav, .mp3, and .aac files under 300 kb
This device is not compatible with iTunes and/or
iTunes files.
can be set as ringtones.
65
AT&T Music
nNote
Transferring Music from the
Digital Music Service
1. Using your computer, open your preferred
If you have a USB hub, connect the handset
directly to your computer rather than through
the hub.
PC music management client.
Transferring Music using
Windows Media Player
1. Open Windows Media® Player on your
2. Locate the song in your library.
3. Make sure the microSD™ card is inserted
properly into the handset.
computer (version 10.0 or higher).
4. Use the USB adapter cable to connect the
handset to the PC. .
2. Use the USB adapter cable to connect the
handset to the PC.
5. Once the USB connection has been
established, the handset displays
“Connected“ and the computer screen then
3. Once the USB connection has been
established, the handset displays
shows the
device. If the
“Connected“ and the computer screen then
detection does not occur, skip to Changing
USB Connection Settings section on
page 69.
shows the
device.
6. Follow the instruction in the program to
transfer music to your handset.
66
AT&T Music
7. Click the Start Sync button to download the
selected songs to your handset.
A “synchronization in progress” message
appears on the application. Do not unplug
the handset during this process. Once
complete, the progress bar will disappear.
nNote
If the target computer does not detect the
newly connected handset or provide an MTP
Player dialog window on the PC screen, skip to
Changing USB Connection Settings section
on page 69.
4. From within the Windows Media®
Player application, click on the Sync tab.
Previously downloaded songs are then
listed on the left side of the application.
8. It is now safe to unplug the USB connector
from the handset.
Drag and Drop Music Using
As A Mass Storage
Device
5. Choose the destination location for the
media files. The
Music
Sync Player appears in a drop-down list on
the right side of the screen.
1. Make sure the microSD™ card is inserted
properly into the headset.
6. Drag a song from the Library to the LG
Music Sync Player on
the right pane. Continue adding the desired
songs.
2. Connect the device to a PC using a
USB data cable.
3. A bubble may appear on the PC, “Found
New Hardware LG USB Modem”.
4. Access My Computer on the PC.
67
AT&T Music
5. The phone’s memory card will be listed
under “Devices with Removable Storage” in
the same location as an optical drive.
Changing USB Connection
Settings
1. Touch
,
, and then
.
2. Touch Connection.
nNote
The PC will automatically assign a drive letter.
3. Touch USB Connection Mode.
7. File explore in a new window for desired
music files.
4. Touch Music Sync (if using Windows
Media® Player or other Digital Music
Services) or Mass Storage (if you are going
to drag or drop files).
8. Drag and drop the desired music content
from the PC window to the “Storage Card”
window.
5. Reconnect the device to a PC.
9. Disconnect the device from the cable.
Deleting Music Files
The following are the three options available
to delete Music from your Phone:
10. Access the Music Player on the phone.
nNote
1. Delete a file using Mass Storage, but not
using Music sync function.
If the target computer does not detect the
newly connected handset as Mass Storage,
skip to Changing USB Connection Settings
section below.
2. Delete a file by directly inserting the
microSD™ external memory onto the PC.
3. Delete a file using delete function on the
phone.
68
AT&T Music
nNote
nNote
If you delete a playlist from the phone, the
songs in the playlist will not be removed and
remain in All songs folder.
Do your file operations like Delete, Move and
Copy using Music Sync.
Some sites are data intensive (i.e. previews via
streaming) so the user should be enrolled in an
unlimited data plan before using these services
to avoid per-use data charges.
Additional charges may apply for downloading
content or use of these services.
Be aware that all of the existing data will be
erased on microSD™ card if you use the below
process.
• Use the Memory Card function in the Settings
menu (Menu > More > Phone > Reset
Settings > Master Clear).
• Format external memory using Mass Storage.
Additional Music Services
There may be other AT&T music applications
preloaded or available, such as the following:
]AT&T Radio : Listen to the latest Hip Hop,
R&B, Rock, Jazz, or Country streaming
commercial-free radio channels, anywhere
you go.
]MusicID: Identify the name, artist and
album to a song from a song sample.
]Music Videos : View the latest music
videos.
69
MobiTV
MobiTV En Español allows you to watch TV in
Spanish and MobiRadio features commercial-
free stations that are always on.
MobiTV
To access MobiTV from the Standby
screen, touch
, then touch
in the
Entertainment tab.
MobiTV is a service that lets you watch live
TV on your phone.
The first time you open the application, you
will be able to choose whether you want
to use MobiTV, MobiTV En Español, or
MobiRadio. Once you make a selection, it will
be the default option every time you open
MobiTV. If you want to switch services, touch
Options and select Main Menu.
70
Games
Access Games on your
or
Browse the catalog of games available to buy
and download new ones.
To launch Games while in the Standby
screen, touch
and choose
in the
Entertainment tab.
Select from one of the many pre-loaded
games or browse the available games with:
]Shop Games: This menu option connects
to AT&T’s game download site.
nWarning
Only J2ME (Java 2 Micro Edition) based games
from the AT&T game store will work with this
phone.
Please note that J2ME and J2SE are not the
same. J2SE is a PC-only technology.
71
Applications
To launch Applications while in the Standby
Loopt
screen, touch
and select
in the
Loopt shows you where friends are located
and what they are doing via detailed,
interactive maps on their phones. Loopt
helps friends connect on the fly and navigate
their social lives by orienting them to
people, places, and events. You can also
share location updates, geo-tagged photos,
and comments with friends in their mobile
address book or on online social networks,
communities, and blogs.
Entertainment tab.
This menu displays the list of Java (J2ME)
applications downloaded and installed on
the phone. The applications can be opened,
deleted within the Application menu. To see
an application’s available information section,
touch the information icon.
Shop Applications
This menu option connects to AT&T’s
application download site. This allows you
to download the various applications by
connecting to the AppCenter.
To access Loopt
From the standby screen, touch
, and
,
,
.
Mobile Banking
Browser
This menu option allows you to use the
alternative WAP browser.
This application provides easy access to your
banking account from your phone, where you
can view your account balances and history,
transfer funds, receive and pay bills and more.
If your bank is not on the Featured Providers
list, be sure to search using the Search All
option. If your banking institution doesn’t
currently participate, check back frequently as
new banks are joining all the time.
72
Camera
Getting to know the viewfinder
Normal View
Capture : Take a picture
Options View
Gallery
Scene mode
Shot mode
Brightness
Settings: Touch this icon to open the settings menu. See the
next page for details.
Image Size
Go to Video Camera
Back: Touch to return to the previous screen.
nNote
The shortcut options disappear after a few seconds automatically.
To recall the options, touch the screen again.
74
Camera
nNote
Settings Menu
In Take Photo mode, you can adjust the zoom
with the side volume keys. The maximum zoom
levels depend on the resolution as follows.
]View Mode: Choose between Full Image
and Full Screen.
]Color Effects: Includes options Off/Black &
White/Negative/Sepia.
Resolution
2048*1536
1600*1200
1280*960
640*480
Zoom scale
No Zoom Available
No Zoom Available
X1.0 ~ X2.0
]White Balance: Set the White Balance
as Auto/Incandescent/Sunny/Fluorescent/
Cloudy.
]Quality: Set the image quality as Super
Fine/Fine/Normal.
X1.0 ~ X2.0
400*240
X1.0 ~ X2.0
]Self Timer: Set the Timer can be set to
Off/3 Seconds/5 Seconds/10 Seconds.
320*240
X1.0 ~ X2.0
]Memory: Choose to save a photo to
External or Handset.
]Hide Icons: Can be set to Automatic or
Manual.
]Noise Reduction: Set the Noise Reduction
can help removing noise in low light.
]Shutter Sound: Can be set to Shutter 1/
Shutter 2/Shutter 3/No Sound.
]Grid Screen: Can be set to Simple cross/
Trisection/Off.
]Reset Settings: Allows you to set to the
default settings.
75
Camera
Record Video
When recording video, you have many of the same Settings options as with taking a photo.
Getting to know the viewfinder
Clean View
Recording start
Gallery
Normal View
White Balance
View Mode: Choose between Full
Image and Full Screen.
Video Size
Brightness
Settings: Touch this icon to open the settings menu.
Video Share: If this option is available, you can make a Video Share call.
Tap to open the Contacts list and make the call.
Go to Camera: Change from video camera to camera mode.
Zoom: Tap to access the zoom bar.
Back: Touch to return to the previous screen.
76
Camera
nNote
Settings Menu
In Video Record mode, you can adjust the zoom
with the side volume keys. The maximum zoom
levels depend on the resolution as follows.
]Duration: Allows you to choose between
General, which provides a longer recording
time, and MMS, which provides a short
recording time in order to be able to send
the video clip in a multimedia message.
Resolution
320*240
Zoom scale
X1.0 ~ X2.0
X1.0 ~ X2.0
]Color Effect: Includes options of options
Off/Black & White/Negative/Sepia.
176*144
]Quality: Determines the quality of a video
clip. Includes options for Super fine/Fine/
Normal.
Camera Album
You can view the Album containing your
pictures and videos. For more available
]Memory: Choose to save a video clip to
External or Handset memory.
options, touch
.
Sort By/Send Via/Print/Slide Show/
Delete/Album Theme/One by One View/
Delete All.
]Hide Icons: Can be set to Automatic or
Manual.
]Voice: Mute or unmute the voice.
]Reset Settings: Allows you to set to the
default settings.
77
My Stuff
Audio
From the standby screen, touch
Video
From the standby screen, touch
,
,
,
,
and choose Audio.
and choose Video.
]Shop Tones: This menu option connects to
AT&T’s ringtone download site.
]
]
Shop Videos: Connects to AT&T’s
video download site.
]Answer Tones: This menu option shows
the list of the sites which are related to
AT&T’s Answer Tones.
Record Video: Opens the Video
Camera application and allows you to
record a new video clip.
]Voice recorder: Allows you to record your
]You can also view the video files in the list.
own audio.
nNote
]You can also view the audio files in the list.
DRM sometimes restricts some functions, such
as send and edit.
Pictures
From the standby screen, touch
,
,
Alarm Clock
and choose choose Pictures.
From the standby screen, touch
,
,
]
]
Shop Wallpapers: Connects to
AT&T’s graphics download site.
and choose Alarm Clock.
The alarm function allows you to set up
Take a Picture: Opens the Camera
application and allows you to take a new
picture.
multiple separate alarms. You can also set
the time, repetition interval and alarm sound.
Select your desired alarm configuration from
the alarm list. If there is no alarm setting,
.
]
Make Animated GIF: Allows you to
create an animation file with the images
in the list.
]You can also view the graphic files in
the list.
78
My Stuff
]Time: Select the desired set time mode.
You can also enter your desired alarm time
by specifying the hour and minutes. If the
time is in the 12 hour format, select either
AM or PM by touching it.
Memory Card
This function shows the files in the external
microSD™ card memory.
From the standby screen, touch
,
,
and choose Memory Card.
]Repeat: Select the desired repeat mode.
]Alarm tone: Select the desired alarm
sound.
Other Files
When you receive files of an undefined format
(such as .vcs, .vcf, etc.) via email, the files are
saved in this folder.
]Volume: Set the desired volume level for
the alarm.
]Alarm Type: Select the desired type of
alarm.
From the standby screen, touch
,
,
and choose Other Files.
]Memo: Enter an alarm name.
The following options are available by
touching
]Snooze Interval: Allows you to set the
snooze interval to Off, 5 Minutes, 15
Minutes, 30 Minutes, 45 Minutes or I Hour.
.
]Send Via: Allows you to send the selected
file via Message or Bluetooth.
Touch
to save your new
]Move: Allows you to move selected files to
the Phone Memory or Memory Card
(if applicable).
Alarm.
]Copy: Allows you to copy selected files to
the Phone Memory or Memory Card
(if applicable).
]Delete: Allows you to delete the selected
file.
79
My Stuff
]Rename: Allows you to edit the name of
the selected file.
]Create new folder: Allows you to create
a new folder.
]Sort By: Allows you to sort the folders by
Date, Type, or Name.
]Delete All: You can delete all files and
folders.
]Used Space: Allows you to view the used
space in the Phone Memory or Memory
Card.
80
Tools and Settings
Send My Number
Call
This network service allows you to set your
phone number to be displayed (On) or hidden
(Off) from the person you are calling. You
can select Set by Network if you prefer to
have different settings for different service
providers.
To access the Call menu from the standby
screen, touch and choose
,
.
Call Forwarding
When this network service is activated, you
can direct your incoming calls to another
number, for example, to your voice mailbox
number. For details, contact AT&T. Select one
of the divert options, for example, select If
Busy to divert voice calls when your number is
busy or when you reject an incoming call.
Auto Redial
If set to On, your phone redials the number
you're trying to call up to 10 times after you
hear a quick, busy signal. Press
the call attempts.
to stop
The following options are available:
This feature attempts to redial numbers that
are engaged due to the wireless network. It
does not redial numbers to an engaged party.
]All Voice Calls: Forwards voice calls
unconditionally.
]If Busy: Forwards voice calls when the
phone is in use.
nNote
There will be no alert indicating the call has
been connected. You must stay on the line to
hear when the call is connected.
]If No Answer: Forwards voice calls which
you do not answer.
]If Out of Reach: Forwards voice calls
when the phone is switched off or out of
coverage.
]Deactivate All: Turns off all call
forwarding options so that all incoming
calls are received by your handset.
81
Tools and Settings
Answer Mode
Call Reject
This allows you to determine how to answer
the phone.
This menu allows you to turn Call Reject On
or Off for all numbers or the numbers in the
Call Reject List.
]Any Key: You can answer an incoming
Clear
call by touching the
key,
Multi-Tasking key.
]Send Key Only: You can only answer an
,
Clear
]Call Reject On/Off: This feature allows
you to choose whether to reject incoming
calls or calls from specific phone numbers.
When the Reject All Calls option is set,
all incoming calls are routed directly to
Voicemail. Reject on List allows you to
enable Call Reject for the numbers saved on
your Call Reject List.
Camera key, and the
incoming call by pressing the
key.
Minute Minder
This option allows you to specify whether the
phone will beep every minute during a call to
keep you informed of the length of the call.
]Call Reject List: After touching
, you can add to the call
reject list by selecting Contact List or
New Number. When you add a number to
the Call Reject List, you can add the number
by entering it directly or by searching for
the number in the Contact List.
Call Waiting
The network will notify you of a new incoming
call while you have a call in progress. Select
Activate to request the network to activate
call waiting, Deactivate to request the
network to deactivate call waiting or View
Status to check if the function is active.
Send DTMF Tones
Select from
/
.
82
Tools and Settings
You can also exchange, for example, business
cards, calendar items and pictures.
TTY
Select from TTY On/TTY Off.
Music Playing is supported through a
Bluetooth® headset.
Time & Cost
Allows you to check Call Duration and Data
Counter.
Hands-free profile
This icon appears when the hands-free
profile is used between the hands-free
device and the phone. This allows you to
call using a Bluetooth® connection.
Bluetooth
To access the Bluetooth menu from the
standby screen, touch
,
and
.
A2DP profile
Your phone has built-in Bluetooth® wireless
technology, which makes it possible for you
to connect your phone wirelessly to other
Bluetooth® devices such as a hands-free
device, PC, PDA, a remote screen or other
phones. The devices registered in your phone
can only be connected one at a time. (To make
a connection to the same type of device or
change Bluetooth® preferences, disconnect
the existing device first.)
This icon appears when the A2DP profile
is used between the stereo headset
device and the phone. This allows you
to listen to an audio clip. A2DP is the
Advanced Audio Distribution Profile,
which provides support for streaming
either mono or stereo audio using
Bluetooth®.
Hands-free + A2DP profile
This icon appears when both profiles of
the hands-free and the A2DP are used
between the compatible device and
the phone. This allows you to call and
listen to an audio clip using a Bluetooth®
connection.
You can have a conversation via a cordless
Bluetooth® hands-free phone or browse the
Internet, wirelessly connected, via a mobile
phone.
83
Tools and Settings
When using each device, make sure to consult To add a new device
the manual that comes with the device.
1. Touch Search New Device to search
for the device that can be connected, and
which is also within range.
nNote
We recommend that your phone and the
Bluetooth® device you are communicating
with be no more than 10 meters apart. The
connection may be improved if there are no
solid objects between your phone and the other
Bluetooth® device.
]Bluetooth: This menu allows you to set the
Bluetooth®
or
.
]My Visibility
- Selecting the
option exposes your
phone to other Bluetooth® devices.
2. If you want to stop searching, touch
Stop
- Selecting
already-paired devices only.
shows your phone to
.
]Search New Device: This function allows
you to search for and add new devices.
3. All of the devices found are displayed.
84
Tools and Settings
4. Touch the desired device and enter the
- Primary Storage: Allows you to choose
a location to save data received using
Bluetooth.
password. If you would like to search
Refresh
again, touch
.
]My Devices: This function allows you to
view the list of all devices that are paired
with your phone.
Sound
To access the Sound menu from the standby
screen, touch
]My Bluetooth Info: This menu allows you
,
, and
.
to configure the profile for Bluetooth®.
Shop Tones
Connects to AT&T ringtone download site.
- My Device Name: Allows you to change
the handset's name that can be seen by
other Bluetooth® devices.
Ringtone
]Sounds: Shows and plays ringtones.
You can select your preferred ringtone by
touching the ringtone listed.
- Supported Services: Displays all
services that the handset supports.
]Volume: Allows you to control Ringtone
volume.
]Alert Type: Supports 3 ring alert types:
Ring, Ring & Vibrate, and Ring after Vibrate.
85
Tools and Settings
]Increasing Ringtone: Allows you to
activate or deactivate the Increasing
Ringtone feature, which is played when you
receive an incoming call.
Alert Tone
]Sounds: Allows you to select a set of alert
tones. Supports 2 alert tone types.
]Volume: Allows you to control Alert Tone
Message Tone
volume.
]Sounds: Shows and plays message tones.
You can select your preferred ringtone by
touching the ringtone listed.
]Alert Type: You can elect to turn Alert
Tones to Ring or Silent.
Multimedia
Allows you to adjust the Multimedia volume.
]Volume: Allows you to control Message
Tone volume.
]Alert Type: Supports 6 message alert
types: Ring Once, Ring Every 2 Min., Ring
Every 15 Min., Ring & Vibrate, Vibrate,
and Silent.
Call
Allows you to adjust the Call volume.
Power On/Off Tones
Allows you to set Power On/Off Tones to
Ring or Silent.
nNote
Full length music tracks cannot be set as either
ringtones or message tones.
86
Tools and Settings
Backlight Timer
Display
This menu allows you to set the duration of
the touch screen backlight.
To access the Display menu from the standby
screen, touch
,
, and
.
Themes
Shop Wallpapers
Allows you to change the whole look of
display. Drag the screen from right to left (or
vice versa) and touch
Connects to AT&T’s graphics download site.
Wallpapers
to
change the display theme to Black or White
This menu allows you to set a picture or a
color as your wallpaper. You may also choose
to have no wallpaper.
Menu style
Allows you to change the Main Menu style to
Tab or Screen by Screen.
Fonts
Allows you to configure the Dialing font size
and Dialing font color. You can also configure
the menu font size.
Brightness
Allows you to set the brightness of the
display screen.
87
Tools and Settings
]Settings
Tools
• Storage: When the Memory Card is
inserted, you can assign the default
storage to External or Handset memory.
To access the Tools menu from the standby
screen, touch , and
,
.
Voice Recorder
Use the Voice Recorder to record voice
memos or other sounds.
• Recording mode: MMS record mode
shortens the time so that the recording
can fit in an MMS and General mode
provides longer recording time.
Record
]Touch
Touch
to start recording.
Pause
to pause recording. To
Resume
continue recording, touch
recording, touch
. To stop
Stop
. The recording
will be saved automatically.
88
Tools and Settings
Voice Command
Voice Command is the function whereby
your phone’s voice recognition engine
identifies the voice of the user and carries
out the requested commands. When the user
operates the Voice Command function, there
are six possible commands, Call <Name or
Number>, Listen Voicemail, Missed Calls,
Messages, Time & Date, and Play or Playlist.
1. Call <Name or Number>: This function
is activated only when the user says the
command "Call" followed by the name
stored in the Address Book or specified
phone number. The voice engine inside the
handset recognizes the user's utterance
and displays name lists or phone numbers
from the phone's Address Book. However,
interfering noise might cause a problem
displaying candidates. Additionally, the user
has the option to superimpose a number
type at the end, such as “mobile”, “home”,
“work” or “other”.
New
]To start a new recording, touch
.
Play
]To play the recording, touch
.
Delete
]To delete the recording, touch
to confirm.
and Yes
]To send the recording by Message or
Bluetooth, touch , Send Via, and
Message or Bluetooth.
• Commands available to user
- Yes: Make the phone call.
- No/Next: Moves to the next missed call
list.
89
Tools and Settings
- Cancel: Go back to the main Voice
Command menu.
5. Time & Date: This command is activated
when the user says the words "time and
date". The phone displays the current local
time and date.
- Exit: Exits Voice Command.
2. Listen Voicemail: This command is
activated when the user says the words
"Listen Voicemail". The user will then be
automatically connected to Voicemail.
6. Play or Playlist: This comment is
activated when the user says the words
“Play” or “Playlist”. The phone plays all
songs in the music list.
3. Missed Calls: This command is activated
when the user says the words "Missed
Calls". The mobile phone presents the
missed call lists.
The Voice Command function also has options
accessible by pressing
when in the Voice
Command screen. The following options are
available:
• Commands available to user
• Mode
- Yes: Make the phone call.
- Speed: Voice Command is abbreviated.
- No/Next: Moves to the next missed call
list.
- Normal: Voice Command is played
normally.
- Cancel: Go back to the main Voice
Command menu.
- Exit: Exits Voice Command.
4. Messages: This command is activated
when the user says the word "Messages".
The phone displays details of unread SMS
or MMS messages.
90
Tools and Settings
• Best Match
• Speakerphone mode
- 1 Match: The most likely match will be
displayed when finding a number from the
Address Book.
- Automatic On: When this option is
selected, sound is loud enough so you can
hear the output when the phone is away
from the ear, at a distance.
- 4 Matches: The four most likely matched
names will be displayed when finding
names from the Address Book.
- Off: When this option is selected, sound
is quieter and can only be heard through
the Earpiece.
• Sensitivity
• Call Alert
- High: Operation and performance of
the voice recognition engine is rarely
affected by the user's voice command and
surrounding sound.
- Ring Only: Rings repeatedly when you
receive a call.
- Ring After Name: States the name of
the saved contact once and then rings
repeatedly when you receive a call.
- Medium: Operation of voice recognition
engine is normally affected by user's voice
command and surrounding sound.
- Name Repeat: States the name of
the saved contact repeatedly when you
receive a call.
- Low: Operation of voice recognition
engine is strongly affected by user's voice
command and surrounding sound.
91
Tools and Settings
]View all: Allows you to view all saved
schedules.
Calendar
The Calendar function allows you to schedule
events and helps to remind you with alerts.
]Week view: Allows you to change
Calendar view mode from Monthly View to
Week view.
To access Calendar from the standby screen,
Calendar
touch
,
,
and
.
]Go to date: Allows you to jump to a
specific date.
When you enter this menu, a calendar will be
displayed. The red square cursor is used to
locate a particular day. The bottom bar on the
calendar indicates schedule(s) for that day.
The phone will sound an alarm tone if it has
been set for a specific schedule item.
]Selective Delete: Allows you to delete
Old schedules or All Schedules selectively.
]Settings: Allows you set Default View and
the day the weeks starts on.
The following options are available when you
Notepad
open the Calendar function and touch
.
The Notepad function allows you to create up
to a maximum of 100 memos.
]New Schedule: Allows you to add a new
schedule on the date you select.
1. From the standby screen, touch
,
,
]Search: Allows you to search the saved
schedule(s).
Notepad
and
.
2. To create a new Note, touch
]Set holiday: Allows you to set a personal
holiday for the selected date.
, enter the memo, and
to save.
touch
92
Tools and Settings
]Touch an area in the country where the
city is located. A list with available cities
will pop up. Touch the desired city. If
there is only one city available in the area
selected, you will see that city’s date and
time information on the bottom side of the
World Clock
The World Clock function provides time and
date information for major cities worldwide.
nNote
The first time you use this function, you will be
asked to enter the name of your current city.
screen. Touch
to add that city.
1. From the standby screen, touch
,
,
World Clock
, and
.
Add city
2. To add a new city, touch
.
3. Scroll down and touch the desired city from
the list of available cities.
]To make it easier, touch
to display
a globe. Scroll left or right to find the
continent where the city is located and
touch it.
93
Tools and Settings
]Sort By: Allows you to sort your tasks by
Date, Status, or Priority.
Tasks
The Tasks function allows you to save and
manage a task.
Stopwatch
1. From the standby screen, touch
,
,
The Stopwatch function allows you to record
the elapsed time of an event. The duration of
an individual lap time (up to 99 times) and the
total time can also be displayed.
Tasks
, and
.
New task
2. Touch
.
3. Enter the Date, Note, and Priority for the
To access Stopwatch from the standby screen,
new task.
Stopwatch
touch
,
,
, and
.
Save
4. Touch
to save the task
]New Time
item.
1. To start timing, touch
The running time is displayed as
.
The following options are available by
pressing in the main Tasks menu:
HH.MM.SS.hh (hours, minutes, seconds,
hundredths of a second).
]New task: Allows you to create a new
task.
2. During the timing, you can record an
individual lap time by touching
Up to 99 lap times can be recorded.
]Delete: Opens the menu from where you
can select Tasks to delete.
.
]Delete All: Allows you to delete all
completed tasks or all past tasks.
3. You can stop timing by touching
and restart by touching
.
]Send: Allows you to send the selected task
via text message, multimedia message, or
Bluetooth.
4. To reset the stop watch, touch
.
]Saved Times: Allows you to see the saved
recorded times.
]View calendar: The Calendar window will
display, from which you will also be able to
create new tasks.
94
Tools and Settings
Calculator
Unit Converter
The Calculator function allows you to
calculate simple mathematical equations.
The Unit Converter function converts any
measurement into a unit you want.
To access Calculator from the standby screen,
To access Unit Converter from the standby
Calculator
touch
,
,
, and
.
screen, touch
Unit Converter
,
,
, and
.
Tip Calculator
The Tip Calculator function allows you to
quickly and easily calculate the tip amount
and total owed based on the total bill,
tip percentage, and the number of people
splitting the bill.
There are 7 types of units that can be
converted: Currency, Area, Length, Weight,
Temperature, Volume, and Velocity.
To access Tip Calculator from the standby
screen, touch
Tip Calculator
,
,
, and
.
95
Tools and Settings
Touch
Date & Time
From the standby screen, touch
From the standby screen, touch
and
,
,
,
,
.
and
.
This menu allows you to customize various
Touch settings. You can personalize the
Touch Screen Feedback to Vibration, Sound,
Vibration & Sound, or Silent.
]Date Format: Allows you to change the
date format to any of the options below.
MM/DD/YYYY (month/date/year)
DD/MM/YYYY (date/month/year)
YYYY/MM/DD (year/month/date)
You can also choose the Vibration Type and
adjust the Vibration Intensity. It is also
possible to set a sound type and adjust its
volume as Touch Screen Feedback.
]Time Format: Allows you to choose a time
format between 12 Hours and 24 Hours.
]Auto Update: Select
to set the phone
to automatically update the time and date
according to the current local time zone.
Select
to manually set the Time &
Date and Daylight Saving Time.
96
Tools and Settings
Set Flight Mode
More
This function allows you to only use the
phone's features that do not require the use
of the wireless network. This is especially
useful when you are in an airplane or in
places where the wireless network is
prohibited. If you set the Flight Mode to
you will be prompted to confirm your
selection. After you confirm it by touching
From the standby screen, touch
,
,
and
.
Phone
Languages
,
Allows you to change the language for the
display text on your phone. This change will
also affect the Language Input mode. You can
choose between Automatic, English, French,
Spanish, or Korean.
, the Flight Mode icon will be displayed
on the screen instead of the network signal
icon.
Auto Key Lock
This function allows you to set the amount of
time before your screen locks automatically.
You can set it to Off, 5 seconds, 15 seconds,
30 seconds, or 45 seconds.
97
Tools and Settings
Security
Various codes and passwords are used to
protect the features and settings of your
phone. They are described in the following
sections.
]Phone Lock: You can use a security code
to avoid unauthorized use of the phone.
If you set Phone Lock to When Power On,
the phone will request a security code
whenever you switch the phone on. If you
set Phone Lock to When SIM Changed, your
phone will request a security code only
when you change your SIM Card. If you set
Phone Lock to Lock Phone Now, your phone
will lock immediately.
]
]
: You cannot make (or receive) any
calls, including emergency calls, or use
other features that require network
coverage.
]PIN Code Request: When the PIN Code
: Deactivates Flight Mode and re-
establishes your wireless connections.
Request feature is set to
, you must
enter your PIN each time you switch the
phone on. Consequently, any person who
does not have your PIN cannot use your
phone without your approval.
98
Tools and Settings
nNote
nNote
Before setting the PIN Code Request feature to
Off, you must enter your PIN.
Not all SIM Cards have a PIN2. If your SIM Card
does not, this menu option is not displayed.
]Fixed Dial Number: This function allows
you to restrict your outgoing calls to
selected phone numbers, if this function is
supported by your SIM Card. The PIN2 code
is required.
]Change Codes: The Change codes feature
allows you to change your current password
to a new one. You must enter the current
password before you can specify a new
one. You can change the access codes for:
Security Code, PIN1, PIN2
• FDN ON/OFF
-
: You can only call phone numbers
stored in the FDN List. You must enter
your PIN2.
Reset Settings
This function allows you to restore factory
settings. To do this, you need the security
code.
-
: You can call any number.
]Master Reset: Restores the settings (e.g.:
Sound, Display, Language, Date & Time,
Bluetooth® Settings) stored in the handset
memory to default values.
]Master Clear: Deletes downloaded and
user created contents (e.g.: images and
videos) from the Phone and the Memory
Card.
99
Tools and Settings
• Phone
Internet Profiles
- Deletes all downloaded and user created
Images, Videos, and Sounds from the
Phone Memory.
This menu shows the Internet Profiles. You
can add, delete, and edit Internet Profiles by
touching
. However, you cannot delete or
edit default configurations provided by AT&T.
- Deletes personal information stored
in the handset memory (e.g.: address
book, messages, tasks, alarm, Calendar
schedules) to default values.
Access Points
This menu shows the Access Points. You can
register, delete, and edit by touching
.
- Restores the settings stored in the
handset memory to the default values.
However, you cannot delete or edit default
configurations provided by AT&T.
• Memory Card: Deletes all contents from
the Memory Card.
Start Up Guide
This menu will start the animated guide. This
guide will help you, using animated visuals,
quickly learn some of the functions of your
.
Connection
USB Connection Mode
You can transfer files from a compatible PC
to the memory in your phone using the Mass
Storage. When you connect the phone to a PC
using the USB cable, this will be displayed as
a removable disk through Windows Explorer.
The USB Connection Mode determines how
your phone will communicate with other
USB devices when they are connected with
a USB cable.
100
Tools and Settings
Set Storage Defaults
Touch Calibration
This function allows you to set the Storage
Default location for each case. When you
need to save files from Camera, Internet
Download, Bluetooth, and Voice Recorder,
you can choose to save them to the Phone
Memory or Memory Card. You can set each
case separately or choose All and set the
Storage Default all the same.
This menu option will allow you to calibrate
your touch screen. Follow the instructions on
the screen to complete this task.
Memory
Used Space
This function shows the status of the user
memory of the handset.
Application Settings
This Menu allows you to adjust the settings
to the following features on the phone:
]Phone Common: This will display the
memory currently used up in your phone
and will categorize it by types of files using
the memory.
Video Share
]Phone Reserved: This function shows the
status of the reserved memory for the user
(Text Message, Contacts, Calendar, Tasks,
Notepad).
]Audio Alert: Enable/Disable audio alert
when Video Share is available.
]Auto Record: Enable/Disable automatic
recording of live Video Share.
]Memory Card: Allows you to check the
current status of the external memory card.
Messaging
]SIM Card: This function shows the status
of the SIM Card user memory.
To set the message settings from standby
screen, touch
,
, and choose Message
settings.
For more information regarding Message
settings, please refer to page 47.
101
Tools and Settings
Wap Browser
nNote
You cannot edit or delete pre-installed accounts.
In order to create a new account, please fill in
the network information.
This menu allows you to customize your
browsing experience by giving you the option
of changing the following settings:
1. Service Name: Name associated with new
account.
• Accounts
2. Homepage: Homepage URL.
This includes the network information used
to connect the browser to the Internet. Select
the desired account by tapping the screen.
This will activate the account that will be
used for future connections. MEdia Net is the
predefined account that is set as default.
3. Internet Profile: You can choose one from
the Internet profiles.
nNote
1. AT&T has provided default settings regarding
account information.
The following options will be available when
2. Creating or editing an account requires
caution. The browser cannot connect to
the Internet if the account information is
incorrect.
you touch
:
]Delete: Allows you to delete an account.
]Delete All: Allows you to delete all
accounts.
102
Tools and Settings
• Appearance
• Clear Login Info
Allows you to choose the settings of the
browser appearance (Text Size, Character
Encoding, Show image, JavaScript).
Allows you to clear all your login info.
• Rendering Mode
Allows you to set the Rendering mode to
Standard or Text Only.
• Cache
The web pages you have accessed are stored
in the memory of the phone.
• Security
]Certificates: You can see the list of
certificates and view them in detail.
]Clear Cache: Remove all cached data in
the memory.
]Clear Session: Clears the secure session.
]Allow Cache: Allows you to enable/
disable the Cache.
• Secure Pop-up
You can control the pop-up which indicates a
secure page or not.
nNote
A cache is a buffer memory, which is used to
store data temporarily, especially when it is
online.
Voice Command
For more information regarding Voice Command
settings, please refer to page 90.
• Cookies
The information of services you have accessed
are stored in what is called a Cookie.
]Delete Cookies: Remove all Cookie data
in the memory.
]Allow Cookies: Allows you to enable/
disable Cookies.
103
Tools and Settings
Software Update
Phone Information
If new software exists, the AT&T server
notifies devices using a WAP push message.
Before updating new software and after
downloading it from the AT&T server, users
can decide whether they would like to
postpone the operation. When the time is up,
users are prompted again or users can resume
the postponed operation using this menu at
any time.
This menu is used to view the Phone Number,
Model Number, and Software Version.
104
Q&A
Please check to see if any problems you have encountered with the phone are described in this
section before taking the phone in for a service or calling a service engineer.
Q
A
How do I view the list of outgoing calls,
incoming calls and missed calls?
Q
A
Why won't the LCD turn on?
Remove the battery, then replace it. Then
turn on the power. If there is no change,
fully charge the battery and try again.
Press the
key.
Q
A
Why is the connection inconsistent or not
audible in certain areas?
When the frequency environment is
unstable in a certain area, connection may
be inconsistent and inaudible. Relocate to
another area and try again.
Q
A
Why does the phone heat up?
The phone may get hot when there is a
very long call duration, when games are
played or even when surfing the Internet
for a long time. This has no effect upon the
life of the product or performance.
Q
A
Why is the connection inconsistent
or abruptly disconnects even when
established?
When frequency is unstable or weak,
or if there are too many users, a
connection may be cut off even after it
was established. Please try again later
or attempt again after relocating to other
areas.
Q
A
Why does the battery run out so quickly
during normal use?
This may be due to the user environment, a
large number of calls or a weak signal.
Q
A
Why is no number dialed when an Address
Book entry is recalled?
Check that the number has been stored
correctly by using the Address Book Search
feature. Re-store them, if necessary.
105
Accessories
There are a variety of accessories available for your mobile phone, some of which may be
sold separately. You can select these options according to your personal communication
requirements. Consult your local dealer for availability.
Travel Adapter
This adapter allows you to charge the battery. It supports
standard US 120 Volt 60Hz outlets.
Battery
Standard battery is available.
CD-ROM
nNote
• Always use genuine LG accessories. Failure to do this may invalidate your warranty.
• Accessories may be different in different regions; please check with our regional service company
or agent for further enquiries.
106
For Your Safety
Be careful when using your phone near
other electronic devices. RF emissions
from your mobile phone may affect nearby
in adequately shielded electronic equipment.
You should consult with manufacturers of any
personal medical devices such as pacemakers
and hearing aides to determine if they are
susceptible to interference from your mobile
phone. Turn off your phone in a medical
facility or at a gas station. Never place your
phone in a microwave oven as this will cause
the battery to explode.
Important Information
This user guide contains important information
on the use and operation of this phone. Please
read all the information carefully for optimal
performance and to prevent any damage
to or misuse of the phone. Any changes or
modifications not expressly approved in this
user guide could void your warranty for this
equipment. Any changes or modifications
not expressly approved by the manufacturer
could void the user’s authority to operate the
equipment.
IMPORTANT! Please read the TIA SAFETY
INFORMATION on page 111 before using
your phone.
Before You Start
Safety Instructions
WARNING! To reduce the possibility of
electric shock, do not expose your phone to
high humidity areas, such as the bathroom,
swimming pool, etc.
Safety Information
Read these simple guidelines. Breaking the
rules may be dangerous or illegal. Further
detailed information is given in this user
guide.
Always store your phone away from
heat. Never store your phone in settings that
may expose it to temperatures less than 32°F
or greater than 104°F, such as outside during
extreme weather conditions or in your car on
a hot day. Exposure to excessive cold or heat
will result in malfunction, damage and/or
catastrophic failure.
]Do not disassemble this unit. Take it to a
qualified service technician when repair
work is required.
]Keep away from electrical appliances such
as TVs, radios, and personal computers.
107
For Your Safety
]The unit should be kept away from heat
sources such as radiators or cookers.
Memory card information and
care
]The memory card cannot be used for
]Do not drop.
recording copyright- protected data.
]Do not subject this unit to mechanical
vibration or shock.
]Keep the memory card out of the small
children's reach.
]The coating of the phone may be damaged
if covered with wrap or vinyl wrapper.
]Do not leave the memory card in extremely
hot location.
]Use dry cloth to clean the exterior of the
unit. (Do not use solvent such as benzene,
thinner or alcohol.)
]Do not disassemble or modify the memory
card.
]Do not subject this unit to excessive smoke
or dust.
FCC RF Exposure Information
WARNING! Read this information before
operating the phone.
]Do not keep the phone next to credit
cards or transport tickets; it can affect the
information on the magnetic strips.
In August 1996, the Federal Communications
Commission (FCC) of the United States, with
its action in Report and Order FCC 96-326,
adopted an updated safety standard for
human exposure to radio frequency (RF)
electromagnetic energy emitted by FCC
regulated transmitters. Those guidelines are
consistent with the safety standard previously
set by both U.S. and international standards
bodies.
]Do not tap the screen with a sharp object;
otherwise, it may damage the phone.
]Do not expose the phone to liquid or
moisture.
]Use the accessories like an earphone
cautiously. Do not touch the antenna
unnecessarily.
108
For Your Safety
The design of this phone complies with
the FCC guidelines and these international
standards.
between the user's body and the back of the
phone, and have not been tested for typical
body-worn operations may not comply with
FCC RF exposure limits and should be avoided.
CAUTION
Use only the supplied and approved antenna.
FCC Part 15 Class B Compliance
Use of unauthorized antennas or modifications This device and its accessories comply with
could impair call quality, damage the phone,
void your warranty and/or result in violation
of FCC regulations. Do not use the phone with
a damaged antenna. If a damaged antenna
comes into contact with skin, a minor burn
may result. Contact your local dealer for a
replacement antenna.
part 15 of FCC rules. Operation is subject
to the following two conditions: (1) This
device and its accessories may not cause
harmful interference, and (2) this device and
its accessories must accept any interference
received, including interference that may
cause undesired operation.
Body-worn Operation
Part 15.105 statement
This equipment has been tested and found
to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation.
This device was tested for typical body-worn
operations with the back of the phone kept
0.79 inches (2cm) between the user’s body
and the back of the phone. To comply with
FCC RF exposure requirements, a minimum
separation distance of 0.79 inches (2cm) must
be maintained between the user’s body and
the back of the phone. Third-party belt-clips,
holsters, and similar accessories containing
metallic components should not be used.
Body-worn accessories that cannot maintain
0.79 inches (2cm) separation distance
109
For Your Safety
If this equipment does cause harmful
interference or television reception, which
can be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
]Do not dispose in fire or with hazardous or
flammable materials.
Adapter (Charger) Cautions
]Using the wrong battery charger could
damage your phone and void your warranty.
]Reorient or relocate the receiving antenna.
]The adapter or battery charger is intended
for indoor use only.
]Increase the separation between the
equipment and receiver.
Do not expose the adapter or battery charger
to direct sunlight or use it in places with high
humidity, such as the bathroom.
]Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Avoid damage to your hearing
]Consult the dealer or an experienced radio/
TV technician for help.
]Damage to your hearing can occur if you are
exposed to loud sound for long periods of
time. We therefore recommend that you do
not turn on or off the handset close to your
ear. We also recommend that music and
call volumes are set to a reasonable level.
Cautions for Battery
]Do not disassemble.
]Do not short-circuit.
]Do not expose to high temperature:
60°C (140°F).
]If you are listening to music while out and
about, please ensure that the volume is at
a reasonable level so that you are aware
of your surroundings. This is particularly
imperative when attempting to cross the
street.
]Do not incinerate.
Battery Disposal
]Please dispose of your battery properly
or bring to your local wireless carrier for
recycling.
110
Safety Guidelines
Those standards were based on
TIA Safety Information
comprehensive and periodic evaluations of the
relevant scientific literature. For example, over
120 scientists, engineers, and physicians from
universities, government health agencies,
and industry reviewed the available body
of research to develop the ANSI Standard
(C95.1).
Provided herein is the complete TIA Safety
Information for Wireless Handheld phones.
Inclusion of the text covering Pacemakers,
Hearing Aids, and Other Medical Devices
is required in the owner’s manual for CTIA
Certification. Use of the remaining TIA
language is encouraged when appropriate.
* American National Standards Institute;
National Council on Radiation Protection
and Measurements; International
Commission on Non-Ionizing Radiation
Protection
Exposure to Radio Frequency
Signal
Your wireless handheld portable telephone
is a lowpower radio transmitter and receiver.
When it is ON, it receives and also sends out
radio frequency (RF) signals.
The design of your phone complies with the
FCC guidelines (and those standards).
In August, 1996, the Federal Communications
Commissions (FCC) adopted RF exposure
guidelines with safety levels for handheld
wireless phones. Those guidelines are
consistent with the safety standards
previously set by both U.S. and international
standards bodies:
Antenna Care
Use only the supplied or an approved
replacement antenna. Unauthorized antennas,
modifications, or attachments could damage
the phone and may violate FCC regulations.
Phone Operation
NORMAL POSITION: Hold the phone as you
would any other telephone with the antenna
pointed up and over your shoulder.
ANSI C95.1 (1992) *
NCRP Report 86 (1986)
ICNIRP (1996)
111
Safety Guidelines
Tips on Efficient Operation
Pacemakers
For your phone to operate most efficiently:
The Health Industry Manufacturers
Association recommends that a minimum
separation of six (6’) inches be maintained
between a handheld wireless phone and a
pacemaker to avoid potential interference
with the pacemaker. These recommendations
are consistent with the independent research
by and recommendations of Wireless
Technology Research.
]Do not touch the antenna unnecessarily
when the phone is in use. Contact with the
antenna affects call quality and may cause
the phone to operate at a higher power
level than otherwise needed.
Driving
Check the laws and regulations on the use of
wireless phones in the areas where you drive.
Always obey them. Also, if using your phone
while driving, please:
Persons with pacemakers:
]Should ALWAYS keep the phone more than
six inches from their pacemaker when the
phone is turned ON.
]Give full attention to driving - driving safely
is your first responsibility;
]Should not carry the phone in a breast
pocket.
]Use hands-free operation, if available;
]Should use the ear opposite the pacemaker
to minimize the potential for interference.
]Pull off the road and park before making
or answering a call if driving conditions
so require.
]If you have any reason to suspect that
interference is taking place, turn your phone
OFF immediately.
Electronic Devices
Most modern electronic equipment is shielded
from RF signals. However, certain electronic
equipment may not be shielded against the RF
signals from your wireless phone.
Hearing Aids
Some digital wireless phones may interfere
with some hearing aids. In the event of such
interference, you may want to consult AT&T.
112
Safety Guidelines
Other Medical Devices
Aircraft
If you use any other personal medical device,
consult the manufacturer of your device to
determine if they are adequately shielded
from external RF energy. Your physician
may be able to assist you in obtaining this
information.
FCC regulations prohibit using your phone
while in the air. Turn your phone OFF before
boarding an aircraft.
Blasting Areas
To avoid interfering with blasting operations,
turn your phone OFF when in a ‘blasting areas
or in areas posted: ‘Turn off two-way radio’.
Obey all signs and instructions.
Health Care Facilities
Turn your phone OFF in health care facilities
when any regulations posted in these areas
instruct you to do so. Hospitals or health care
facilities may use equipment that could be
sensitive to external RF energy.
Potentially Explosive
Atmosphere
Turn your phone OFF when in any area with a
potentially explosive atmosphere and obey all
signs and instructions. Sparks in such areas
could cause an explosion or fire resulting in
bodily injury or even death.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in
motor vehicles. Check with the manufacturer
or its representative regarding your vehicle.
Areas with a potentially explosive atmosphere
are often, but not always, marked clearly.
Potential areas may include: fueling areas
(such as gasoline stations); below deck on
boats; fuel or chemical transfer or storage
facilities; vehicles using liquefied petroleum
gas (such as propane or butane); areas where
the air contains chemicals or particles (such
as grain, dust, or metal powders); and any
You should also consult the manufacturer of
any equipment that has been added to your
vehicle.
Posted Facilities
Turn your phone OFF in any facility where
posted notices so require.
113
Safety Guidelines
other area where you would normally be
advised to turn off your vehicle engine.
]Only use the battery for the system for
which it is specified.
]Only use the battery with a charging system
that has been qualified with the system per
IEEE-Std-1725-2006. Use of an unqualified
battery or charger may present a risk of fire,
explosion, leakage, or other hazard.
For Vehicles Equipped with an
Air Bag
An air bag inflates with great force. DO NOT
place objects, including either installed or
portable wireless equipment, in the area over
the air bag or in the air bag deployment area.
If in-vehicle wireless equipment is improperly
installed and the air bag inflates, serious
injury could result.
]Do not short circuit a battery or allow
metallic conductive objects to contact
battery terminals.
]Replace the battery only with another
battery that has been qualified with the
system per IEEE-Std-1725-2006. Use of an
unqualified battery may present a risk of
fire, explosion, leakage or other hazard.
Safety Information
Please read and observe the following
information for safe and proper use of your
phone and to prevent damage. Also, keep the
user guide in an accessible place at all the
times after reading it.
]Promptly dispose of used batteries in
accordance with local regulations.
]Battery usage by children should be
supervised.
]Do not disassemble or open crush, bend or
deform, puncture or shred.
]Avoid dropping the phone or battery. If the
phone or battery is dropped, especially
on a hard surface, and the user suspects
damage, take it to a service center for
inspection.
]Do not modify or remanufacture, attempt
to insert foreign objects into the battery,
immerse or expose to water or other liquids,
expose to fire, explosion or other hazard.
]Improper battery use may result in a fire,
explosion or other hazard.
114
Safety Guidelines
]The phone shall only be connected to USB
products that bear the USB-IF logo or have
completed the USB-IF compliance program.
]Battery life will vary due to usage patterns
and environmental conditions.
]Use of extended backlighting, Mobile Web
Browsing, and data connectivity kits affect
battery life and talk/standby times.
Charger and Adapter Safety
]The charger and adapter are intended for
indoor use only.
]The self-protection function of the battery
cuts the power of the phone when its
operation is in an abnormal state. In this
case, remove the battery from the phone,
reinstall it, and turn the phone on.
Battery Information and Care
]Please dispose of your battery properly
or take it to your local wireless carrier for
recycling.
]Actual battery life will depend on network
configuration, product settings, usage
patterns, battery and environmental
conditions.
]The battery does not need to be fully
discharged before recharging.
]Use only LG-approved chargers specific to
your phone model since they are designed
to maximize battery life.
Explosion, Shock, and Fire
Hazards
]Do not disassemble or impact the battery
as it may cause electric shock, short-circuit,
and fire. Store the battery in a place out of
reach of children.
]Do not put your phone in a place subject
to excessive dust and keep the minimum
required distance between the power cord
and heat sources.
]Keep the battery’s metal contacts clean.
]Unplug the power cord prior to cleaning
your phone, and clean the power plug pin
when it is dirty.
]Replace the battery when it no longer
provides acceptable performance. The
battery can be recharged several hundred
times before replacement.
]When using the power plug, ensure that it
is firmly connected. If it is not, it may cause
excessive heat or fire.
]Recharge the battery after long periods of
non-use to maximize battery life.
115
Safety Guidelines
]If you put your phone in a pocket or bag
without covering the receptacle of the
phone (power plug pin), metallic articles
(such as a coin, paperclip or pen) may
short-circuit the phone. Always cover the
receptacle when not in use.
]When the phone is not used for a long
period time, store it in a safe place with the
power cord unplugged.
]Using the phone in proximity to receiving
equipment (i.e., TV or radio) may cause
interference to the phone.
]Do not short-circuit the battery. Metallic
articles such as a coin, paperclip or pen in
your pocket or bag may short-circuit the +
and – terminals of the battery (metal strips
on the battery) upon moving. Short-circuit
of the terminal may damage the battery and
cause an explosion.
]Do not use the phone if the antenna is
damaged. If a damaged antenna contacts
skin, it may cause a slight burn. Please
contact an LG Authorized Service Centre to
replace the damaged antenna.
]Do not immerse your phone in water. If this
happens, turn it off immediately and remove
the battery. If the phone does not work,
take it to an LG Authorized Service Centre.
General Notice
]Using a damaged battery or placing a
battery in your mouth may cause serious
injury.
]Do not paint your phone.
]The data saved in your phone might be
deleted due to careless use, repair of
the phone, or upgrade of the software.
Please backup your important phone
numbers. (Ring tones, text messages, voice
messages, pictures, and videos could also
be deleted.) The manufacturer is not liable
for damage due to the loss of data.
]Do not place items containing magnetic
components such as a credit card, phone
card, bank book or subway ticket near your
phone. The magnetism of the phone may
damage the data stored in the magnetic
strip.
]Talking on your phone for a long period of
time may reduce call quality due to heat
generated during use.
116
Safety Guidelines
]When you use the phone in public places,
set the ring tone to vibration so as not to
disturb others.
exposures have not found any biological
effects. Some studies have suggested
that some biological effects may occur,
but such findings have not been confirmed
by additional research. In some cases,
other researchers have had difficulty in
reproducing those studies, or in determining
the reasons for inconsistent results.
]Do not turn your phone on or off when
putting it in your ear.
FDA Consumer Update
The U.S. Food and Drug Administration Centre
for Devices and Radiological Health Consumer
Update on Mobile Phones.
2. What is the FDA’s role concerning the
safety of wireless phones?
Under the law, the FDA does not review
the safety of radiation-emitting consumer
products such as wireless phones before
they can be sold, as it does with new drugs
or medical devices. However, the agency
has authority to take action if wireless
phones are shown to emit radiofrequency
energy (RF) at a level that is hazardous to
the user. In such a case, the FDA could
require the manufacturers of wireless
phones to notify users of the health hazard
and to repair, replace, or recall the phones
so that the hazard no longer exists.
1. Do wireless phones pose a health
hazard?
The available scientific evidence does
not show that any health problems are
associated with using wireless phones.
There is no proof, however, that wireless
phones are absolutely safe. Wireless
phones emit low levels of radiofrequency
energy (RF) in the microwave range while
being used. They also emit very low levels
of RF when in the standby mode. Whereas
high levels of RF can produce health
effects (by heating tissue), exposure to
low level RF that does not produce heating
effects causes no known adverse health
effects. Many studies of low level RF
Although the existing scientific data do not
justify FDA regulatory actions, the FDA has
urged the wireless phone industry to take a
number of steps, including the following:
117
Safety Guidelines
]Support needed research into possible
biological effects of RF of the type
emitted by wireless phones;
]National Telecommunications and
Information Administration
The National Institutes of Health
participates in some interagency working
group activities, as well.
]Design wireless phones in a way that
minimizes any RF exposure to the user
that is not necessary for device function;
and
The FDA shares regulatory responsibilities
for wireless phones with the Federal
Communications Commission (FCC). All
phones that are sold in the United States
must comply with FCC safety guidelines
that limit RF exposure. The FCC relies on
the FDA and other health agencies for
safety questions about wireless phones.
]Cooperate in providing users of
wireless phones with the best possible
information on possible effects of
wireless phone use on human health.
The FDA belongs to an interagency working
group of the federal agencies that have
responsibility for different aspects of RF
safety to ensure coordinated efforts at
the federal level. The following agencies
belong to this working group:
The FCC also regulates the base stations
that the wireless phone networks rely
upon. While these base stations operate
at higher power than do the wireless
phones themselves, the RF exposures that
people get from these base stations are
typically thousands of times lower than
those they can get from wireless phones.
Base stations are thus not the subject
of the safety questions discussed in this
document.
]National Institute for Occupational Safety
and Health
]Environmental Protection Agency
]Occupational Safety and Health
Administration
118
Safety Guidelines
3. What kinds of phones are the subject
of this update?
suffered from flaws in their research
methods. Animal experiments investigating
the effects of radiofrequency energy (RF)
exposures characteristic of wireless phones
have yielded conflicting results that often
cannot be repeated in other laboratories.
A few animal studies, however, have
suggested that low levels of RF could
accelerate the development of cancer in
laboratory animals. However, many of
the studies that showed increased tumor
development used animals that had been
genetically engineered or treated with
cancer causing chemicals so as to be pre-
disposed to develop cancer in the absence
of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day.
These conditions are not similar to the
conditions under which people use wireless
phones, so we don’t know with certainty
what the results of such studies mean for
human health. Three large epidemiology
studies have been published since
The term ‘wireless phone’ refers here to
handheld wireless phones with built-in
antennas, often called ‘cell’, ‘mobile’, or
‘PCS’ phones. These types of wireless
phones can expose the user to measurable
radiofrequency energy (RF) because of the
short distance between the phone and
the user’s head. These RF exposures are
limited by FCC safety guidelines that were
developed with the advice of the FDA and
other federal health and safety agencies.
When the phone is located at greater
distances from the user, the exposure to RF
is drastically lower because a person’s RF
exposure decreases rapidly with increasing
distance from the source. The so-called
‘cordless phones,’ which have a base unit
connected to the telephone wiring in a
house, typically operate at far lower power
levels, and thus produce RF exposures far
below the FCC safety limits.
December 2000. Between them, the studies
investigated any possible association
between the use of wireless phones and
primary brain cancer, glioma, meningioma,
or acoustic neuroma, tumors of the brain or
4. What are the results of the research
done already?
The research done thus far has produced
conflicting results, and many studies have
119
Safety Guidelines
salivary gland, leukemia, or other cancers.
None of the studies demonstrated the
existence of any harmful health effects
from wireless phone RF exposures.
However, none of the studies can answer
questions about long-term exposures, since
the average period of phone use in these
studies was around three years.
- if they do- may be many, many years. The
interpretation of epidemiological studies
is hampered by difficulties in measuring
actual RF exposure during day-to-day use of
wireless phones. Many factors affect this
measurement, such as the angle at which
the phone is held, or which model of phone
is used.
5. What research is needed to decide
whether RF exposure from wireless
phones poses a health risk?
6. What is the FDA doing to find out more
about the possible health effects of
wireless phone RF?
A combination of laboratory studies and
epidemiological studies of people actually
using wireless phones would provide some
of the data that are needed. Lifetime animal
exposure studies could be completed in a
few years. However, very large numbers
of animals would be needed to provide
reliable proof of a cancer promoting effect
if one exists. Epidemiological studies can
provide data that is directly applicable
to human populations, but 10 or more
years follow-up may be needed to provide
answers about some health effects, such
as cancer. This is because the interval
between the time of exposure to a cancer-
causing agent and the time tumors develop
The FDA is working with the U.S. National
Toxicology Program and with groups
of investigators around the world to
ensure that high priority animal studies
are conducted to address important
questions about the effects of exposure
to radiofrequency energy (RF). The FDA
has been a leading participant in the
World Health Organization International
Electromagnetic Fields (EMF) Project since
its inception in 1996. An influential result
of this work has been the development of a
detailed agenda of research needs that has
driven the establishment of new research
programs around the world. The project
has also helped develop a series of public
120
Safety Guidelines
information documents on EMF issues. The
FDA and the Cellular Telecommunications
& Internet Association (CTIA) have a formal
Cooperative Research and Development
Agreement (CRADA) to do research on
wireless phone safety. The FDA provides
the scientific oversight, obtaining input
from experts in government, industry,
and academic organizations. CTIA-funded
research is conducted through contracts
with independent investigators. The initial
research will include both laboratory
studies and studies of wireless phone
users. The CRADA will also include a
broad assessment of additional research
needs in the context of the latest research
developments around the world.
exposure from wireless telephones is set
at a Specific Absorption Rate (SAR) of 1.6
watts per kilogram (1.6 W/kg). The FCC
limit is consistent with the safety standards
developed by the Institute of Electrical
and Electronic Engineering (IEEE) and the
National Council on Radiation Protection
and Measurement. The exposure limit takes
into consideration the body’s ability to
remove heat from the tissues that absorb
energy from the wireless phone and is set
well below levels known to have effects.
Manufacturers of wireless phones must
report the RF exposure level for each model
of phone to the FCC. The FCC website
(http://www.fcc.gov/oet/rfsafety) gives
directions for locating the FCC identification
number on your phone so you can find your
phone’s RF exposure level in the online
listing.
7. How can I find out how much radio
frequency energy exposure I can get
by using my wireless phone?
8. What has the FDA done to measure the
radio frequency energy coming from
wireless phones?
All phones sold in the United States must
comply with Federal Communications
Commission (FCC) guidelines that limit radio
frequency energy (RF) exposures. The FCC
established these guidelines in consultation
with the FDA and the other federal health
and safety agencies. The FCC limit for RF
The Institute of Electrical and Electronic
Engineers (IEEE) is developing a technical
standard for measuring the radio frequency
energy (RF) exposure from wireless
121
Safety Guidelines
phones and other wireless handsets with
the participation and leadership of FDA
scientists and engineers. The standard,
‘Recommended Practice for Determining
the Spatial- Peak Specific Absorption Rate
(SAR) in the Human Body Due to Wireless
Communications Devices: Experimental
Techniques,’ sets forth the first consistent
test methodology for measuring the rate
at which RF is deposited in the heads of
wireless phone users. The test method
uses a tissuesimulating model of the
human head. Standardized SAR test
methodology is expected to greatly improve
the consistency of measurements made at
different laboratories on the same phone.
SAR is the measurement of the amount of
energy absorbed in tissue, either by the
whole body or a small part of the body. It
is measured in watts/kg (or milliwatts/g)
of matter. This measurement is used to
determine whether a wireless phone
complies with safety guidelines.
9. What steps can I take to reduce my
exposure to radiofrequency energy
from my wireless phone?
If there is a risk from these products - and
at this point we do not know that there is
- it is probably very small. But if you are
concerned about avoiding even potential
risks, you can take a few simple steps to
minimize your exposure to radiofrequency
energy (RF). Since time is a key factor in
how much exposure a person receives,
reducing the amount of time spent using a
wireless phone will reduce RF exposure. If
you must conduct extended conversations
by wireless phone every day, you could
place more distance between your body
and the source of the RF, since the exposure
level drops off dramatically with distance.
For example, you could use a headset and
carry the wireless phone away from your
body or use a wireless phone connected to
a remote antenna. Again, the scientific data
do not demonstrate that wireless phones
are harmful. But if you are concerned about
the RF exposure from these products, you
can use measures like those described
above to reduce your RF exposure from
wireless phone use.
122
Safety Guidelines
10. What about children using wireless
phones?
11. What about wireless phone
interference with medical equipment?
The scientific evidence does not show
a danger to users of wireless phones,
including children and teenagers. If you
want to take steps to lower exposure to
radiofrequency energy (RF), the measures
described above would apply to children
and teenagers using wireless phones.
Reducing the time of wireless phone use
and increasing the distance between
the user and the RF source will reduce
RF exposure. Some groups sponsored by
other national governments have advised
that children be discouraged from using
wireless phones at all. For example,
the government in the United Kingdom
distributed leaflets containing such a
recommendation in December 2000. They
noted that no evidence exists that using
a wireless phone causes brain tumors or
other ill effects. Their recommendation to
limit wireless phone use by children was
strictly precautionary; it was not based on
scientific evidence that any health hazard
exists.
Radio frequency energy (RF) from wireless
phones can interact with some electronic
devices. For this reason, the FDA helped
develop a detailed test method to measure
electromagnetic interference (EMI) of
implanted cardiac pacemakers and
defibrillators from wireless telephones.
This test method is now part of a standard
sponsored by the Association for the
Advancement of Medical Instrumentation
(AAMI). The final draft, a joint effort by
the FDA, medical device manufacturers,
and many other groups, was completed
in late 2000. This standard will allow
manufacturers to ensure that cardiac
pacemakers and defibrillators are safe
from wireless phone EMI. The FDA has
tested hearing aids for interference
from handheld wireless phones and
helped develop a voluntary standard
sponsored by the Institute of Electrical and
Electronic Engineers (IEEE). This standard
specifies test methods and performance
requirements for hearing aids and wireless
phones so that no interference occurs when
a person uses a ‘compatible’ phone and a
123
Safety Guidelines
‘compatible’ hearing aid at the same time.
This standard was approved by the IEEE in
2000. The FDA continues to monitor the use
of wireless phones for possible interactions
with other medical devices. Should harmful
interference be found to occur, the FDA will
conduct testing to assess the interference
and work to resolve the problem.
World Health Organization (WHO)
International EMF Project
(http://www.icnirp.de)
National Radiological Protection Board (UK)
(http://www.hpa.org.uk/radiation)
10 Driver Safety Tips
Your wireless phone gives you the
powerful ability to communicate by voice
almost anywhere, anytime. An important
responsibility accompanies the benefits of
wireless phones, one that every user must
uphold.
12. Where can I find additional
information?
For additional information, please refer to the
following resources:
FDA web page on wireless phones
(http://www.fda.gov/
Radiation-EmittingProducts/
RadiationEmittingProductsandProcedures/
HomeBusinessandEntertainment/CellPhones/
default.htm)
When operating a car, driving is your first
responsibility.
When using your wireless phone behind the
wheel of a car, practice good common sense
and remember the following tips:
1. Get to know your wireless phone and its
features such as speed dial and redial.
Carefully read your instruction manual
and learn to take advantage of valuable
features most phones offer, including
automatic redial and memory. Also, work to
memorize the phone keypad so you can use
the speed dial function without taking your
attention off the road.
Federal Communications Commission (FCC) RF
Safety Program
(http://www.fcc.gov/oet/rfsafety)
International Commission on Non-lonizing
Radiation Protection
(http://www.icnirp.de)
124
Safety Guidelines
2. When available, use a hands-free device.
A number of hands-free wireless phone
accessories are readily available today.
Whether you choose an installed mounted
device for your wireless phone or a speaker
phone accessory, take advantage of these
devices if available to you.
5. Do not take notes or look up phone
numbers while driving. If you are reading
an Address Book or business card, or
writing a “to-do” list while driving a car,
you are not watching where you are going.
It is common sense. Don’t get caught in
a dangerous situation because you are
reading or writing and not paying attention
to the road or nearby vehicles.
3. Position your wireless phone within easy
reach. Make sure you place your wireless
phone within easy reach and where you
can reach it without removing your eyes
from the road. If you get an incoming call at
an inconvenient time, if possible, let your
voicemail answer it for you.
6. Dial sensibly and assess the traffic; if
possible, place calls when you are not
moving or before pulling into traffic. Try to
plan your calls before you begin your trip
or attempt to coincide your calls with times
you may be stopped at a stop sign, red light
or otherwise stationary. But if you need
to dial while driving, follow this simple
tip— dial only a few numbers, check the
road and your mirrors, then continue.
4. Suspend conversations during hazardous
driving conditions or situations. Let the
person you are speaking with know you
are driving; if necessary, suspend the call
in heavy traffic or hazardous weather
conditions. Rain, sleet, snow and ice can
be hazardous, but so is heavy traffic. As
a driver, your first responsibility is to pay
attention to the road.
125
Safety Guidelines
7. Do not engage in stressful or emotional
conversations that may be distracting.
Stressful or emotional conversations and
driving do not mix; they are distracting
and even dangerous when you are behind
the wheel of a car. Make people you are
talking with aware you are driving and if
necessary, suspend conversations which
have the potential to divert your attention
from the road.
9. Use your wireless phone to help others in
emergencies. Your wireless phone provides
you a perfect opportunity to be a “Good
Samaritan” in your community. If you see
an auto accident, crime in progress or
other serious emergency where lives are in
danger, call 911 or other local emergency
number, as you would want others to do
for you.
10. Call roadside assistance or a special
wireless non-emergency assistance
number when necessary. Certain
situations you encounter while driving
may require attention, but are not urgent
enough to merit a call for emergency
services. But you can still use your
wireless phone to lend a hand. If you see
a broken-down vehicle posing no serious
hazard, a broken traffic signal, a minor
traffic accident where no one appears
injured or a vehicle. you know to be
stolen, call roadside assistance or other
special non-emergency wireless number.
8. Use your wireless phone to call for help.
Your wireless phone is one of the greatest
tools you can own to protect yourself and
your family in dangerous situations — with
your phone at your side, help is only three
numbers away. Dial 911 or other local
emergency number in the case of fire,
traffic accident, road hazard or medical
emergency. Remember, it is a free call on
your wireless phone!
For more information, please call to
888-901-SAFE, or visit our website
http://www.ctia.org.
126
Safety Guidelines
certified power level in all tested frequency
bands. Although SAR is determined at the
highest certified power level, the actual SAR
level of the phone while operating can be
well below the maximum value. Because
the phone is designed to operate at multiple
power levels to use only the power required
to reach the network, in general, the closer
you are to a wireless base station antenna,
the lower the power output.
Consumer Information on
SAR (Specific Absorption
Rate)
This Model Phone Meets the Government’s
Requirements for Exposure to Radio Waves.
Your wireless phone is a radio transmitter
and receiver. It is designed and manufactured
not to exceed the emission limits for
exposure to radio frequency (RF) energy set
by the Federal Communications Commission
(FCC) of the U.S. Government. These limits
are part of comprehensive guidelines and
establish permitted levels of RF energy for
the general population. The guidelines are
based on standards that were developed by
independent scientific organizations through
periodic and thorough evaluation of scientific
studies. The standards include a substantial
safety margin designed to assure the safety of
all persons, regardless of age and health.
Before a phone model is available for sale
to the public, it must be tested and certified
to the FCC that it does not exceed the limit
established by the government-adopted
requirement for safe exposure. The tests are
performed in positions and locations (e.g., at
the ear and worn on the body) as required
by the FCC for each model. The highest SAR
value for
phone when
tested for use at the ear is 1.22 W/kg and
when worn on the body, as described in this
user’s manual, is 0.45 W/kg. (Body-worn
measurements differ among phones models,
depending upon available accessories and
FCC requirements.) While there may be
differences between SAR levels of various
phones and at various positions, they all meet
the government requirement for safe exposure.
The exposure standard for wireless mobile
phones employs a unit of measurement
known as the Specific Absorption Rate,
or SAR. The SAR limit set by the FCC is
1.6 W/kg.* Tests for SAR are conducted using
standard operating positions specified by the
FCC with the phone transmitting at its highest
127
Safety Guidelines
The FCC has granted an Equipment
Authorization for this model phone with
all reported SAR levels evaluated as in
compliance with the FCC RF emission
guidelines. SAR information on this model
phone is on file with the FCC and can be
found under the Display Grant section of
http://www.fcc.gov/oet/ea/fccid after
searching on FCC ID BEJGT550.
Additional information on Specific Absorption
Rates (SAR) can be found on the Cellular
Telecommunications Industry Association
(CTIA) website at http://www.ctia.org.
* In the United States and Canada, the SAR
limit for mobile phones used by the public
is 1.6 watts/kg (W/kg) averaged over one
gram of tissue. The standard incorporates
a substantial margin of safety to give
additional protection for the public and to
account for any variations in measurements.
128
Glossary
To help you understand the main technical terms and abbreviations used in this booklet and to
take full advantage of the features on your mobile phone, here are a few definitions.
Call Forwarding
The ability to reroute calls to another number.
GSM (Global System for Mobile
Communication)
International standard for cellular
Call Reject
The ability to reject incoming calls or calls
from specific phone numbers.
communication, guaranteeing compatibility
between the various network operators. GSM
covers most European countries and many
other parts of the world.
Call Waiting
The ability to inform users that they have an
incoming call when engaged on another call.
Java
Programming language generating
applications that can run on all hardware
platforms, whether small, medium or large,
without modification.
Conference Calls
Ability to establish a conference call involving
up to five additional parties.
It has been promoted for and geared heavily
towards the Web, both for public Web sites
and Intranets. When a Java program runs
from a Web page, it is called a Java applet.
When it is run on a mobile phone or pager, it
is called a MIDlet.
GPRS (General Packet Radio
Service)
GPRS guarantees continuous connection to
the Internet for mobile phone and computer
users. It is based on the Global System
for Mobile Communication (GSM) circuit-
switched cellular phone connections and the
Short Message Service (SMS).
129
Glossary
Line Identification Services
(Caller ID)
Service allowing subscribers to view or block
the telephone numbers of callers.
SIM Card
Card containing a chip with all the information
required to operate the phone (network
and memory information, as well as the
subscriber's personal data). The SIM card fits
into a small slot on the back of the phone and
is protected by the battery.
Phone Password
Security code used to unlock the phone
when you have selected the option to lock it
automatically each time it switches on.
SMS (Short Message Service)
Network service sending and receiving
text messages to and from another
Roaming
subscriber, without the need to speak to
the correspondent. The message created or
received (up to 160 characters long) can be
displayed, received, edited or sent.
Use of your phone when you are outside your
home area (for example, when traveling).
SDN (Service Dial Numbers)
Telephone numbers supplied by your network
provider and giving access to special services
such as voice mail, directory inquiries,
customer support and emergency services.
Patent Information
This product was manufactured under one or
more of the following US
patents: 5276765, 5749067, 6061647
130
Index
A
D
Additional Music Services .......................................69
Answering a Call ......................................................15
E
G
B
Backlight Timer .........................................................87
Battery Disposal .....................................................110
I
Installing the SIM Card and Battery ..........................8
Internet Profiles ......................................................100
C
Changing the Text Input Mode.................................17
L
131
Index
Software Update ....................................................104
M
T
N
U
O
V
P
Phone Components.....................................................6
W
R
S
Service Dial Numbers...............................................24
132
|