LG Electronics Encore User Manual

User Guide  
Some of the contents in this manual may differ from your phone depending  
on the software of the phone or your service provider. AT&T marks contained  
herein are trademarks of AT&T Intellectual Property and/or AT&T affiliated  
companies. © 2010 AT&T Intellectual Property. All rights reserved.  
Actual color of the phone may vary.  
Bluetooth QD ID B015987  
LIMITED WARRANTY STATEMENT  
1. WHAT THIS WARRANTY COVERS :  
2.WHAT THIS WARRANTY DOES  
NOT COVER :  
1. Defects or damages resulting from use of the  
product in other than its normal and customary  
manner.  
LG offers you a limited warranty that the enclosed  
subscriber unit and its enclosed accessories will  
be free from defects in material and workmanship,  
according to the following terms and conditions:  
1. The limited warranty for the product extends for  
TWELVE (12) MONTHS beginning on the date  
of purchase of the product with valid proof of  
purchase, or absent valid proof of purchase,  
FIFTEEN (15) MONTHS from date of manufacture  
as determined by the unit’s manufacture date code.  
2. Defects or damages from abnormal use, abnormal  
conditions, improper storage, exposure to moisture  
or dampness, unauthorized modifications,  
unauthorized connections, unauthorized repair,  
misuse, neglect, abuse, accident, alteration,  
improper installation, or other acts which are  
not the fault of LG, including damage caused by  
shipping, blown fuses, spills of food or liquid.  
2. The limited warranty extends only to the original  
purchaser of the product and is not assignable or  
transferable to any subsequent purchaser/end user.  
3. Breakage or damage to antennas unless caused  
directly by defects in material or workmanship.  
3. This warranty is good only to the original purchaser  
of the product during the warranty period as long  
as it is in the U.S, including Alaska, Hawaii, U.S.  
Territories and Canada.  
4. That the Customer Service Department at LG was  
not notified by consumer of the alleged defect or  
malfunction of the product during the applicable  
limited warranty period.  
4. The external housing and cosmetic parts shall  
be free of defects at the time of shipment and,  
therefore, shall not be covered under these limited  
warranty terms.  
5. Products which have had the serial number  
removed or made illegible.  
6. This limited warranty is in lieu of all other  
warranties, express or implied either in fact or  
by operations of law, statutory or otherwise,  
including, but not limited to any implied warranty  
of marketability or fitness for a particular use.  
5. Upon request from LG, the consumer must provide  
information to reasonably prove the date of  
purchase.  
6. The customer shall bear the cost of shipping the  
product to the Customer Service Department of LG.  
LG shall bear the cost of shipping the product back  
to the consumer after the completion of service  
under this limited warranty.  
7. Damage resulting from use of non-LG approved  
accessories.  
8. All plastic surfaces and all other externally exposed  
parts that are scratched or damaged due to normal  
customer use.  
9. Products operated outside published maximum  
Some states do not allow the exclusive of  
limitation of incidental or consequential damages  
or limitations on how long an implied warranty  
lasts; so these limitations or exclusions may not  
apply to you. This warranty gives you specific legal  
rights and you may also have other rights which  
vary from state to state.  
ratings.  
10. Products used or obtained in a rental program.  
11. Consumables (such as fuses).  
3. WHAT LG WILL DO:  
LG will, at its sole option, either repair, replace or  
refund the purchase price of any unit that does  
not conform to this limited warranty. LG may  
choose at its option to use functionally equivalent  
reconditioned, refurbished or new units or parts  
or any units. In addition, LG will not re-install or  
back-up any data, applications or software that  
you have added to your phone. It is therefore  
recommended that you back-up any such data or  
information prior to sending the unit to LG to avoid  
the permanent loss of such information.  
5. HOW TO GET WARRANTY  
SERVICE :  
To obtain warranty service, please call or fax to  
the following telephone numbers from anywhere  
in the continental United States:  
Tel. 1-800-793-8896 or Fax. 1-800-448-4026  
Or visit www.lgeservice.com.  
Correspondence may also be mailed to:  
LG Electronics MobileComm U.S.A., Inc.  
201 James Record Road Huntsville, AL 35824  
4. STATE LAW RIGHTS :  
DO NOT RETURN YOUR PRODUCT TO THE ABOVE  
ADDRESS.  
Please call or write for the location of the LG  
authorized service center nearest you and for the  
procedures for obtaining warranty claims.  
No other express warranty is applicable to  
this product. THE DURATION OF ANY IMPLIED  
WARRANTIES, INCLUDING THE IMPLIED  
WARRANTY OF MARKETABILITY, IS LIMITED TO  
THE DURATION OF THE EXPRESS WARRANTY  
HEREIN. LG INFOCOMM INC. SHALL NOT BE  
LIABLE FOR THE LOSS OF THE USE OF THE  
PRODUCT, INCONVENIENCE, LOSS OR ANY  
OTHER DAMAGES, DIRECT OR CONSEQUENTIAL,  
ARISING OUT OF THE USE OF, OR INABILITY  
TO USE, THIS PRODUCT OR FOR ANY BREACH  
OF ANY EXPRESS OR IMPLIED WARRANTY,  
INCLUDING THE IMPLIED WARRANTY OF  
MARKETABILITY APPLICABLE TO THIS PRODUCT.  
User Guide  
Table of Contents  
2
3
4
Phone Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104  
5
Your Phone  
1. Power key  
Phone Components  
2. Earpiece: Lets you hear the caller and  
automated prompts.  
1
2
3
3. Proximity Sensor  
4. SEND key: Press this key in standby mode  
to quickly access the most recent missed,  
dialed, and received calls.  
5. END key: Ends or rejects a call.  
Press once to return to the standby screen.  
6. Clear key  
4
5
6
7. Side volume keys  
When on the standby screen: Allows  
you to set the Ringtone and Touchtone  
volume. Hold the Down key to toggle the  
Vibrate only Mode On and Off.  
During a call: Allows you to change the  
Earpiece volume.  
When playing background music:  
Allows you to change the music volume.  
7
8
9
8. Charger/USB Port  
9. Multi-Tasking key  
10  
10. Camera key: Press to start the Camera  
function. Press and hold to start the Video  
Camera function.  
6
 
Your Phone  
Rear View  
Battery cover  
SIM card slot  
Battery  
External  
camera lens  
microSD™ memory  
card slot  
7
 
Getting Started  
2. Remove the battery  
Installing the SIM Card and  
Battery  
Hold the top edge of the phone and use the  
fingernail cutout to lift the battery from the  
battery compartment.  
1. Remove the battery cover  
Press down on the battery cover and slide it  
towards the bottom of the phone. Then lift  
the battery cover off.  
nWarning  
Do not remove the battery when the phone is  
switched on, as this may damage the phone.  
8
 
Getting Started  
3. Install the SIM card  
4. Install the battery  
Please make sure the battery is removed  
from the phone before installing the SIM  
card. Slide the SIM card into the SIM card  
slot. Make sure the gold contact area on  
the card is facing downwards. To remove  
the SIM card, pull it gently in the opposite  
direction.  
Insert the top of the battery first into the  
top edge of the battery compartment.  
Ensure that the battery contacts align  
with the terminals on the phone. Press the  
bottom of the battery down until it clips  
into place.  
9
Getting Started  
Charging your phone  
Lift the charger port cover on the right side  
Installing a Memory Card  
You can expand the available memory space  
on your phone by using a memory card.  
of your  
. Insert the charger  
connector to the phone (ensure that side  
‘B’ of the connector is facing up) and then  
plug the other end into a wall socket. Your  
will need to be charged  
nTip  
A memory card is an optional accessory.  
1. Press down on the battery cover and slide it  
towards the bottom of the phone. Then lift  
the battery cover off.  
until you receive a ‘Battery Full’ notification.  
Important!  
The battery must be fully charged initially to  
improve battery lifetime.  
2. Slide the memory card into the slot at  
the top (as demonstrated in the following  
image), until it clicks into place. Make sure  
the gold contact area is facing downwards.  
nWarning  
Use of unauthorized accessories could damage  
your phone and void your warranty.  
10  
 
Getting Started  
3. Replace the battery cover.  
nNote  
If your memory card has existing content, it  
will automatically be filed in the correct folder.  
For example, videos will be accessible from  
the Videos folder. If your memory card has  
protected content (i.e. content such as songs  
or graphics with Digital Rights Management  
copywriting loaded from another device), it will  
not be accessible. You will need to reformat the  
memory card prior to using it with this device.  
11  
Getting Started  
On-Screen Icons  
The table below describes various display indicators or icons that appear on the phone's display  
screen.  
ICON/  
INDICATOR  
ICON/  
INDICATOR  
DESCRIPTION  
DESCRIPTION  
Multitasking  
Silent profile in use  
Network signal strength  
(number of bars will vary)  
Vibration profile in use  
Call Forwarding activated  
EDGE in use  
1
No network signal  
Remaining battery life  
Battery empty  
Roaming  
Flight Mode is on  
New text message  
New voicemail  
Bluetooth is active  
Background music playing  
Background music paused  
An alarm is set  
Ring profile in use  
Ring & Vibrate profile in use  
Ring after Vibrate profile in use  
12  
Touch Calibration  
Set your touch screen for ease of use.  
]
Touch + markers to calibrate the screen.  
]Once you’ve finished calibrating your  
screen, save the settings.  
nNote  
To reset the touch calibration, touch  
,
tab,  
, and choose Touchpad Calibration.  
13  
 
General Functions  
Making International Calls  
1. When entering a phone number, touch and  
Making a Call  
1. Make sure your phone is powered on.  
hold  
and the international access  
2. Touch  
and enter a phone number using  
character ‘+’ will appear.  
the touch dialpad. To edit a number on the  
display screen, simply touch the  
to erase one digit at a time.  
2. Enter the country code, area code, and the  
phone number.  
key  
3. Press the  
[SEND] key or touch  
]Press and hold the  
entire number.  
key to erase the  
Call  
on the touch dialpad to call the  
number.  
3. Press the  
[SEND] key or touch  
Call  
on the touch dialpad to call the  
Ending a Call  
When you have finished a call, press the  
number.  
End call  
[END] key or touch  
.
Making a Call with the Send Key  
1. Press the  
numbers for the most recent missed, dialed,  
and received calls will be displayed.  
[SEND] key, and the phone  
Making a Call from the Contacts  
You can store frequently called names and  
phone numbers in the SIM card as well as in  
the phone memory.  
2. Touch the desired number.  
3. Press the  
[SEND] key or touch  
You can dial a saved number by simply  
touching a name in the Contacts List and  
Call  
.
pressing the  
[SEND] key or touching  
Call  
.
14  
 
General Functions  
Answering a Call  
Adjusting the Volume  
During a call, if you want to adjust the  
earpiece volume, use the side volume keys  
of the phone.  
When you receive a call, the phone rings and  
the phone icon appears on the screen. If the  
caller can be identified, the caller’s phone  
number (or name if stored in your Address  
Book) is displayed.  
In the standby screen, you can adjust the ring  
volume using the side volume keys.  
1. Press the  
[SEND] or touch  
.
If Any Key has been set as the Answer  
Mode, any key press will answer a call  
except for the  
[END] key,  
and  
Setting Profiles  
.
Press either of the side volume keys. You can  
set your Ringtone a range of volume levels,  
Vibrate All, Alarm Only, or Silent All.  
2. End the call by pressing the  
[END]  
End call  
key or touch  
.
nNote  
You can answer a call while using the Address  
Book or other menu features.  
15  
 
General Functions  
You can also adjust the touchtone sound and  
vibration volume from the Touch tab.  
Vibrate only Mode (Quick)  
Vibrate only Mode can be activated by  
touching and holding  
from the touch  
dialpad. You can also set Vibrate only Mode  
by pressing and holding the down volume key.  
16  
General Functions  
The phone will display “Vibrate only” On. If  
you would like to turn Vibrate only Mode off,  
Entering Text  
You can enter alphanumeric characters by  
using the phone’s touch pad. For example,  
storing names in the Address Book, writing a  
message, or scheduling events in the calendar  
all require text to be entered.  
touch and hold  
again.  
Changing the Text Input Mode  
You can change the text input mode by  
touching the Text Input Mode toggle button  
on the touch screen.  
The following text input modes are available  
on the phone:  
ABC Mode  
Signal Strength  
This mode allows you to enter letters by  
touching the key labeled with the required  
letter once, twice, three, or four times until  
the letter is displayed.  
If you are inside a building, moving near  
a window may give you better reception.  
You can see the strength of your signal by  
the signal indicator on your phone’s display  
screen.  
17  
 
General Functions  
1. When you are in the T9 predictive text input  
mode, begin entering a word by pressing  
123 Mode (Numbers Mode)  
Type numbers using one keytouch per number.  
To change to 123 mode in a text entry field,  
the touch screen keys  
to  
.
Press one key per letter.  
touch  
.
]The word changes as letters are typed  
- ignore what is displayed on the screen  
until the word is typed completely.  
Using the Symbol Mode  
The Symbol Mode enables you to enter  
various symbols or special characters. To  
]If the word is still incorrect after typing  
enter a symbol, touch  
desired symbol.  
. Then select the  
completely, press  
on the pop up  
menu to see the options. Then select the  
word you want by touch.  
Using the T9 Mode  
]If the desired word is missing from the  
The T9 predictive text input mode allows you  
to enter words easily with a minimum number  
of key presses. As you touch each key, the  
phone begins to display the characters that  
it thinks you are typing based on a built-in  
dictionary. As new letters are added, the word  
changes to reflect the most likely candidate  
from the dictionary.  
touching  
.
18  
General Functions  
nNote  
To delete letters, touch  
. Touch and hold  
down  
to erase the entire text entry.  
Refer to the table below for more information  
on the characters available using the keys.  
nNote  
Pressing the  
unsaved message in the Drafts folder.  
Touch  
change text entry mode from Lower Case to  
Upper Case, touch twice and the key will  
to input an Upper Case letter. To  
[END] key will save your  
turn to an orange color - indicating that Caps  
Lock has been activated.  
Using the ABC Mode  
Use the touch pad keys to enter your text.  
Characters in the Order Display  
Key  
1. Touch the key labeled with the desired  
letter:  
Upper Case  
. , ' @ ? ! - : / 1  
A B C 2  
Lower Case  
. , ' @ ? ! - : / 1  
a b c 2  
1
2
3
4
5
6
7
8
9
]Once for the first letter.  
]Twice for the second letter.  
]And so on.  
D E F 3  
d e f 3  
G H I 4  
g h i 4  
2. To insert a space, touch  
. To delete  
J K L 5  
j k l 5  
letters, touch  
. Touch and hold to  
erase the entire text entry.  
M N O 6  
P Q R S 7  
T U V 8  
m n o 6  
p q r s 7  
t u v 8  
W X Y Z 9  
w x y z 9  
Space Key,  
0 (Long press)  
Space Key,  
0 (Long press)  
0
19  
General Functions  
Using the 123 (Numbers) Mode  
Using the Korean Mode  
The 123 Mode enables you to enter numbers  
in a text message (a telephone number,  
for example) more quickly. Touch the keys  
corresponding to the required digits before  
manually switching back to the appropriate  
text entry mode.  
Allows you to type in Korean when you set  
the language to Korean.  
When you use Touch Keypad  
Allows you easily input the letters. To input  
,
touch  
and touch  
. To input , touch  
and touch  
.
T9 Dictionary  
The T9 Dictionary is a feature that allows the  
user to add any unique or personal words to  
the T9 standard language database. The T9  
Dictionary function can be selected from the  
Text Entry Settings by using Options  
.
Within the T9 Dictionary function, the user  
can add, modify, delete, or reset personal  
words.  
nNote  
You can select a different T9 language from  
the same Options menu. T9 mode is disabled  
by default.  
20  
Address Book  
From the standby screen, touch  
and  
touch  
. You will see following Address  
Book’s submenus.  
Contact List  
This menu allows you to save and manage  
contact address information. The Contact  
List's functions allow you to add a new  
address or search saved contact addresses  
by name. To search a contact, touch  
and  
input the contact person’s name. If you input  
‘At’, it will show all contacts beginning with  
‘At’ in their name. From the standby screen,  
you can directly search for a contact by  
touching  
and  
.
]
]
: Search a contact.  
: Shows your contacts by first letter/  
character.  
21  
 
Address Book  
2. Touch  
to set a Picture ID for a contact  
New Contact  
by using a saved picture from Pictures or  
taking a new picture of the contact person.  
Choose from No Picture, Picture, or Take  
New Picture. After you take a new picture  
of the contact person, touch  
an area of the picture, then touch Set to  
This menu allows you to add a new contact  
address. You can enter contact address  
information, including: name, phone numbers,  
email addresses, group information, pictures,  
ringtone, and a memo.  
to select  
set the picture as the Contact Picture ID. To  
delete the picture ID, touch  
and choose  
No Picture.  
]Enter the first name, last name, or both.  
]Enter up to five different numbers. Touch  
and you can set that number as a  
Speed Dial.  
]Enter an email address.  
]Select a group for the contact.  
]Set the ringtone for the contact or leave it  
as the default ringtone.  
1. From the standby screen, touch  
touch  
and  
.
]Add a memo if necessary.  
]Choose whether to save the contact to your  
Phone or SIM Card memory.  
3. Touch  
to save the contact.  
22  
 
Address Book  
]Your Voicemail is already set to speed  
dial 1. This is a default setting and cannot  
be changed. Touch the number you wish to  
assign a speed dial contact.  
Groups  
This menu allows you to manage group  
information. By default, there are 5 groups:  
Relatives, Friends, Colleagues, School, and  
VIP. Or you can put a contact in No group. You  
can also configure a ring tone for a group so  
that the group ring tone sounds when a call  
from a specific contact address within that  
group is received (and there is no ring tone  
configured for the specific contact address).  
Speed Dials  
You can assign a frequently-called contact  
to a speed dial list. You can select a number  
from 2 to 9 as a speed dial. You can configure  
a speed dial number for a specific contact  
address to any of the 8 numbers.  
]This will open your address book. Touch  
the contact you would like to assign to  
that number. Then touch  
number to the speed dial.  
to assign the  
]To call an assigned speed dial number,  
touch from the standby screen. Then  
touch and hold the assigned number; the  
call will be placed to the assigned number  
automatically.  
23  
 
Address Book  
1. From the standby screen, touch  
to open the Options menu and select  
Service Dial Numbers.  
, touch  
SIM Management  
This menu allows you to copy information  
from your SIM card, e.g. name, handset  
number, etc., to your handset. If a name is  
duplicated during the copying operation, the  
information is also duplicated.  
2. The names of the available services will  
be shown.  
3. Touch a service number. Press the  
[SEND] key.  
You can also copy entries from the handset  
memory to the SIM card (not all the data will  
be copied).  
My Info  
This displays your own phone numbers stored  
in your phone/SIM card. You can edit its name  
From this menu, you are also able to delete  
entries in the SIM card.  
From the standby screen, touch  
, touch  
and number by touching  
or you can  
to open the Options menu and select  
choose  
to send the information.  
SIM Management.  
From the standby screen, touch  
, touch  
to open the Options menu and select  
My Info.  
Service Dial Numbers  
You can view the list of Service Dial Numbers  
(SDN) assigned by your network provider.  
Such numbers could include the emergency  
services, directory assistance, and voicemail  
numbers.  
24  
 
In-Call Menu  
Your phone provides a number of control  
functions that you can use during a call. To  
access these functions during a call, touch  
.
Swapping Between Two Calls  
By using one of the two methods below, you  
can switch between two on-going calls.  
• Press  
[SEND] key.  
• Touch  
.
During a Call  
Answering an Incoming Call  
To answer an incoming call when the handset  
is ringing, simply press the  
or touch  
The menu displayed on the handset screen  
during a call is different from the default main  
menu displayed when in the standby screen.  
These options are described below.  
[SEND] key  
. The handset is  
also able to warn you of an incoming call  
while you are already on a call. A tone will  
sounds in the earpiece, and the display will  
show that a second call is waiting. This  
feature, known as Call Waiting, is only  
available if your network supports it.  
Making a Second Call  
You can select a number you wish to dial to  
make a second call.  
• Press  
and press  
, enter the 2nd phone number,  
.
If Call Waiting is turned on, you can put the  
first call on hold and answer the second call  
or  
• Press  
to select a contact from your  
Address Book and then press the Call button  
.
by pressing the  
[SEND] key or touching  
.
25  
 
In-Call Menu  
Rejecting an Incoming Call  
You can reject an incoming call without  
answering by simply pressing the  
Video Share Calling  
Making a Video Share Call  
[END]  
You can make or answer a Video Share call  
with other 3G video phones. In order to start  
a Video Share call, both sides must have a 3G  
Video Share capable phone and both must be  
in a 3G coverage area.  
key or touching  
.
Muting the Microphone  
You can mute the microphone during a call by  
touching . The handset can be unmuted  
by touching  
again. When the handset is  
nNote  
muted, the caller cannot hear you, but you can  
still hear the caller.  
Before you start a Video Share Call, you must  
check the following:  
Using the Speakerphone  
• Phone must be in an AT&T 3G service area.  
You can use the integrated Speakerphone  
during a call by touching . The loudspeaker  
is automatically deactivated when you end  
the call.  
nWarning  
Due to increased volume levels, do not place  
the phone near your ear while the speakerphone  
is enabled.  
26  
 
In-Call Menu  
To initiate Video Share follow these  
steps:  
nNote  
The Speakerphone will be automatically  
activated when a Video Share session begins,  
unless a hands-free device (Bluetooth® or stereo  
headset) is connected.  
1. Make a phone call by dialing a number or  
selecting a number from the Address book.  
Or you can make a video share call directly  
from the Recent Call or Contact List by  
touching a call or contact, then touching  
and selecting Video Share (in Recent  
Calls) or Video Share Call (in Contact  
List). Select the type of Video Share (Live or  
Recorded). In this case skip steps 2-3.  
Live: Share a real-time video stream with the  
other party.  
Recorded: Share a pre-recorded video  
clip with the other party. (Note that H.263  
& Mpeg4 video formats in 176x144 size is  
supported)  
4. If the other party accepts the Video Share  
invitation, the Video Share session will  
begin. (After accepting, it may take several  
seconds before the actual Video Share  
starts.)  
2. A few seconds after the connection is  
established, a "Video Share" prompt will  
appear on the screen once the other party  
is ready to use the Video Share service. If  
the Audio Alert in the Video Share setting  
During a Video Share call, you can do the  
following by touching the icons below:  
Speaker Speaker  
(see Application Setting) is set to  
,
an audio alert will sound along with the  
prompt.  
]
]
]
/
: You can turn on/off the  
on  
off  
Speakerphone.  
3. To Share Video with another party, touch  
Video Share  
the  
or press the Camera  
Mute  
Unmute  
/
: You can mute/unmute  
key and select the video type (Live or  
Recorded).  
the microphone.  
Stop  
: You can stop a Video Share call  
and proceed to a Voice call.  
27  
In-Call Menu  
You can choose from the following:  
]Hold Call: You can hold the phone call by  
selecting ‘Hold Call’. (Note: Video Share  
will stop when you select ‘Hold Call’)  
]Brightness: Allows you to adjust the  
brightness of the video.  
During the Video Share session, turn the  
speakerphone on/off using the ‘Speaker off’ /  
‘Speaker on’ key.  
]Zoom: Allows you to zoom in/out the video.  
]Start recording/Stop Recording: You can  
start recording the live video by selecting  
‘Start recording’. Once you are recording  
the video, you can stop recording by  
selecting ‘Stop Recording’.  
nNote  
Recorded video clip will be saved in My Stuff  
> Video.  
]Use Phone Speaker/Use Bluetooth  
Headset: When ‘Use Bluetooth Headset’ is  
selected, you can have a conversation using  
Bluetooth®. When ‘Use Speaker Phone’ is  
selected, you can have a conversation using  
either speakerphone or handset.  
5.1. Stop a Video Share call and proceed to a  
voice call by  
1. Touching  
Stop  
5.2. End a voice call along with the Video  
Share call by  
1. Pressing  
2. Touch  
Key  
and then  
]End Call: You can end the phone call by  
selecting ‘End Call’. (Note: Video Share will  
stop as well)  
End call  
28  
In-Call Menu  
nNote  
Answering a Video Share Call  
1. A Video Share call will be terminated in the  
following cases:  
Accept  
1. To start a Video Share Call, touch  
when you receive a prompt stating that the  
contact wants to Video Share with you.  
Decline  
• When trying to make a conference call/  
second call during a Video Share call.  
Touch  
to decline the Video Share  
• When the voice call is placed on hold.  
• When the voice call is disconnected.  
call. (Note that after accepting the call, it  
may take several seconds before the Video  
Share session starts.)  
• When moving out of an AT&T 3G service  
area.  
You can choose from the following:  
• When the network connection is poor.  
]Landscape mode: When Landscape mode  
is selected you can watch shared video in  
landscape mode.  
2. A Video Share call will be unavailable in the  
following cases (“Video Share” message will  
not appear).  
]Use Speaker Phone/Use Bluetooth  
Headset: When ‘Use Bluetooth Headset’ is  
selected, you can have a conversation using  
Bluetooth®. When ‘Use Speaker Phone’ is  
selected, you can have a conversation using  
either speakerphone or handset.  
• When trying to make a conference call/  
second call during a Video Share call.  
• When the voice call is placed on hold.  
• When moving out of an AT&T 3G service  
area.  
nNote  
The speakerphone will be automatically  
turned on when a Video Share call begins, and  
automatically reverts back to the previous mode  
when a Video Share call ends.  
29  
 
In-Call Menu  
Saving your Video Share  
Making a Video Share Call from  
the Video Recording Mode or  
Video Player  
The sender can record video during the Video  
Share session by  
1. Touching  
recording during a live Video Share call.  
, then touching Start  
When you are Recording Video, you can easily  
make a Video Share call to a person in your  
Contact List.  
2. Setting Auto Record to ‘ON’  
(see Application Settings).  
1. Start Video Share call as follows:  
Sender can save the recorded video by  
]In Record Video Mode, touch  
]In Video Player, touch  
.
1. Touching  
, then touching Stop  
.
Recording during a live Video Share call.  
nNote  
2. Ending Video Share call.  
This menu item is active only in 3G coverage  
areas and on Video Share capable devices.  
Recorded video will be saved in My Stuff  
> Video.  
If the other party is not ready for Video Share,  
the call will proceed to an ordinary voice call.  
30  
 
In-Call Menu  
Making a Second Call  
Conference Calls  
You can make a second call while currently  
on a call simply by accessing the dialpad,  
from the In-Call Menu, entering the second  
The conference service provides you with the  
ability to have a simultaneous conversation  
with more than one caller. The conference  
call feature can be used only if your network  
service provider supports this feature.  
number, and pressing the  
[SEND] key.  
When the second call is connected, the first  
call is automatically placed on hold. You can  
swap between calls by pressing the  
[SEND] key.  
Once a conference call is set up, calls may  
be added, disconnected or separated (that  
is, removed from the conference call but still  
connected to you) by the person who set up  
the conference call. These options are all  
available from the In-Call menu.  
Setting Up a Conference Call  
To set up a conference call, place the first  
call. Once that is connected, follow the steps  
above to make a second call. You can then  
join the two separate calls by touching  
and touching Join Calls.  
The maximum number of callers in a  
conference call is five. Once started, you are  
in control of the conference call, and only you  
can add calls to the conference call.  
31  
 
In-Call Menu  
Placing the Conference Call on  
Hold  
To place a conference call on hold, press the  
key.  
Ending a Conference Call  
The currently active conference call can be  
disconnected by pressing the  
key.  
Adding Calls to the Conference  
Call  
To add a call to an existing conference call,  
touch  
to place the Conference Call  
on hold, then touch Dialpad to access the  
dialpad, and enter the number. Once the call  
is connected, touch  
to merge the calls.  
Private Call in a Conference Call  
To have a private call with one caller from a  
conference call, touch  
.
When the numbers of the callers are  
displayed, select  
for the one you wish  
to speak in private with. Only the person who  
initiates the Conference Call can initiate a  
Private Call.  
32  
 
Your Standby Screen  
From here you can access all menu options,  
make a quick call, and view the status of your  
phone - as well as many other things.  
]When the screen light is off, press the  
key on the top side twice to  
restore the standby screen.  
]Don’t cover the phone with a case or cover  
as the touch screen will not work with any  
material covering it.  
Touch Screen Tips  
The standby screen is also a great place to  
get accustomed to the touch screen.  
To select an item, touch the icon accurately.  
Your  
can be set to vibrate  
slightly when it recognises you’ve touched  
an option.  
To scroll through lists, touch the last item  
visible and slide your finger up the screen.  
The list will move up so more items are  
visible.  
]There’s no need to press hard, the  
touchscreen is sensitive enough to pick up  
on a light yet firm touch.  
]Use the tip of your finger to touch the  
option you require. Be careful not to touch  
any other keys.  
33  
 
Your Standby Screen  
The Quick Keys  
The quick keys on your standby screen provide easy, one-touch access to your most used  
functions.  
Touch to bring up the touch  
dialpad to make a call. Input the  
number as you would using a  
normal key pad and touch  
AT&T  
or press the  
key.  
Touch to open your contacts and  
search for the number you want  
to call. You can also create new  
contacts and edit existing ones.  
Touch to access the Messaging  
menu. From here you can create  
a new outgoing message.  
Quick keys  
Touch to open the main menu. All  
of your phone’s functions can be  
accessed through the main menu  
and its sub-menus.  
34  
 
Your Standby Screen  
Widget  
Favorite  
Allows you to use Widgets and even add  
them to your standby screen.  
Allows you to easily contact your friends and  
family by displaying your favorite contacts on  
the standby screen.  
]Touch  
to open the Widget List.  
]First, touch  
from the standby screen.  
]Drag a Widget from the list onto the  
standby screen. This will enable you to use  
Widgets.  
AT&T  
]You can play songs, add memos, check the  
calendar, play slideshows, set an alarm, or  
add events directly from the standby screen.  
]Touch  
to close the Widget List.  
AT&T  
]Select  
to choose a contact. You can  
choose up to 30 contacts for one page.  
Touch the contacts you would like to add  
and then touch Add.  
AT&T  
Widgets  
35  
 
Your Standby Screen  
]If you want to delete a contact from this  
]Touch  
to finish editing the  
screen, touch the  
at the top right corner  
contacts on this screen. Then to access  
your contacts, simply touch on their  
corresponding icon. Touch  
of the contact icon.  
to call,  
to send a message,  
to  
AT&T  
check message received from that person,  
and  
to check the call history from that  
person.  
AT&T  
]If you want to edit one of the contacts,  
touch the picture icon and the View screen  
will come up. Then press  
contact.  
to edit the  
36  
Your Standby Screen  
Annunciator  
Shortcuts  
With  
’s Annunciator, you  
Add your favorite menu on the standby  
screen.  
can quickly connect to the Music Player,  
Bluetooth, and more.  
]Touch to edit the items on the screen.  
Touch the top side of the standby screen.  
AT&T  
]Touch  
touch to delete the application from  
Shortcuts, or touch to finish.  
to add another application,  
]You can use Music Player to play music or  
turn on Bluetooth.  
37  
 
Your Standby Screen  
]You can set your profile by touching  
You can set your profile to Ring, Ring  
and Vibration, Ring after Vibration,  
Silent, and Vibration.  
.
]To send a text message, touch  
.
To send an email, touch  
To check Voicemail, touch  
.
.
]To use IM, choose from  
.
]If you want to set an Alarm, touch  
]To view the Calendar and add new events,  
touch  
.
.
38  
Menu Tree  
Touch  
in the standby screen to open the Main Menu. From here, you can access the  
following sub-menus: Communications, Find, Entertainment, and Tools & Settings.  
Communications  
Dialing  
Find  
Mobile Web  
Address Book  
AT&T Social Net  
Messaging  
YPmobile  
AT&T Navigator  
Where  
Mobile E-mail  
IM  
My Account  
My-Cast Weather  
Wikimobile  
Shop GPS  
Recent History  
PicDial  
Tools & Settings  
Call  
Entertainment  
AppCenter  
AT&T Music  
MobiTV  
Bluetooth  
Sound  
Display  
Tools  
AllSport GPS  
Games  
Touch  
Applications  
Camera  
Date & Time  
More  
My Stuff  
39  
 
Messaging  
This menu includes functions related to SMS  
(Short Message Service), MMS (Multimedia  
Message Service), Voicemail, and network  
service messages.  
Editing a message  
The following options are available when  
editing a message.  
]Symbol: You can insert symbols ranging  
from sentence notes to emoticons. Touching  
New Message  
1. In the standby screen, touch  
the  
you want. You can use  
scroll through the various pages of symbols.  
twice, you can select the symbols  
and to  
.
2. Touch Create new message.  
nNote  
If you attach a graphic or an audio file while  
writing a multimedia message, the file loading  
time can take up to 5 seconds. You will not be  
able to activate any key during the file loading  
time. When the file loading is complete, you  
will be able to write a multimedia message.  
40  
 
Messaging  
Inserting Multimedia files in outgoing  
]Record New Audio: You can insert a new  
audio clip taken by the Voice Recorder.  
messages is easy. Touch  
option from below:  
and select an  
• Record Mode: MMS mode record time is  
]Picture: You can preview the selected  
about 5 minutes.  
picture by touching the portion of the  
thumbnail that does not include  
Touch to attach the picture in the  
preview state.  
• Storage: You can assign the default  
storage to Handset or External memory.  
.
]Record New Video: You can record a  
new video to insert to the message. The  
options are similar to those when inserting  
a new picture.  
]Audio: You can insert a file from your  
saved Audio files.  
]Video: You can insert a file from your saved  
Video clips.  
]Take New Picture: You can insert a new  
image taken from the camera.  
nNote  
Refer to page 74 for camera options.  
41  
Messaging  
]Template  
Using Options  
Preset multimedia templates are available.  
Touch  
to use the options below.  
]More: Allows you to insert Subject, vCard,  
vCalendar, vNote, vTask, or Contact.  
Text Entry Settings  
- Text Entry Language: Allows you to  
set the text entry language to English,  
Français, Español, or Korean.  
nNote  
vCard, vCalendar, vNote, vTask, and Contact  
are created by the Address Book, Calendar,  
Notepad, and Tasks functions. Go to the  
corresponding sections for more detailed  
information.  
- Show/Hide Word Candidate: When  
in T9 Entry Mode, you can see the word  
candidates as you type.  
- Next Word Prediction On/Off  
- T9 dictionary: Here you can add,  
delete, reset, and modify words to the T9  
dictionary.  
Request Read Receipt: If this is set to  
On, you can check whether your message  
was read successfully.  
42  
Messaging  
Save to Drafts: Saves the selected  
- Caller Groups: Displays Contact Groups.  
message to Drafts.  
- Recent Messages: Choose a contact  
Writing Font Size: Set the writing font  
from recent messages.  
size to Small, Medium, or Large.  
- Recent Calls: Choose a contact from  
Cancel Message: Allows you to exit the  
message without saving anything you have  
entered.  
recent calls.  
- Delivery Options: Allows you to choose  
from Request Read Receipt, Add Cc,  
and Add Bcc.  
Sending a Message  
- Edit Message: Allows you to go back to  
the message editing mode.  
When you are ready to send the message,  
touch  
. Your Contact List will appear,  
from which you can select a recipient for your  
message. Enter the name(s) of the recipient(s)  
in the Recipients field to search the Contact  
List. If you wish to enter a new number or  
email address as your recipient, touch  
- Save to Drafts: Saves the selected  
message to Drafts.  
- Cancel Message: Allows you to cancel  
the message.  
and choose one of the following options:  
- Text Entry Settings: This menu allows  
you to set the text entry settings.  
- Enter Number: Allows you to enter  
the recipient(s) number using the touch  
keypad.  
- Enter Email: Allows you to enter an  
email address instead of a phone number.  
43  
Messaging  
Message folders  
The folder structure on your  
Inbox  
You will be alerted when you receive a  
message. All received messages will be  
stored in the Inbox. In the Inbox, you can  
identify each message by icons. To reach the  
was designed to be fast and easy to use.  
]Inbox: All the messsages you receive are  
placed into your Inbox.  
Inbox, from the standby screen, touch  
.
]Drafts: If you don’t have time to finish  
writing a message, you can save what  
you’ve done so far here.  
Touch a message to open it, then touch  
for more options. Note that options  
are different when viewing a message in  
Standard and Conversation View.  
]Outbox: This is a temporary storage folder  
where messages are stored while being  
sent.  
nNote  
If you see the message “USIM memory is full”,  
then you should delete some messages from  
your Inbox.  
44  
 
Messaging  
]Forward: (For SMS) Allows you to forward  
the message to another person.  
Standard View  
The following options are available in  
standard view:  
]Make voice call: (For SMS) Initiates a call  
to the sender.  
]Add to Address Book: (For MMS/SMS)  
You can save the sender’s phone number in  
the Contact List.  
]Copy & Move: (For SMS) Allows you to  
copy and move the message to the SIM  
card or Handset.  
]Select Slide: (For MMS) If the multimedia  
message has more than one slide, you can  
select and move to the desired slide.  
Conversation View  
This mode allows you to view all messages  
with each contact in conversational order.  
]Extract Data: (For MMS/SMS) If a  
phone number or email address is in the  
message’s text, the phone will identify it  
and allow you to save it.  
Expand All  
Choose  
choose  
to see messages in detail or  
for the simple view.  
Collapse All  
]View attachment: (For MMS) Allows  
you to view and save each individual  
attachment.  
Drafts  
You can view the messages saved as drafts.  
To see the Drafts folder, touch from the  
standby screen, then touch Inbox to open the  
]Message Details: (For MMS/SMS)  
You can view information about received  
messages, such as Type, Subject, sender’s  
address, and Time.  
drop-down menu, then touch Drafts.  
45  
 
Messaging  
]Delete: Allows you to delete messages.  
Outbox  
]Sort By: Sorts by Date, To, and Subject.  
Outbox is a storage place for messages  
waiting to be sent and messages sent  
successfully. When you press the  
[SEND] key, you can make a call to the  
number of the recipient number of the  
selected message.  
]Message settings: Allows you to set  
various message settings.  
]Delete All: Delete all messages.  
Those options are available when you choose  
a message in Outbox.  
If the message is not sent from the Outbox,  
you will receive a sound alert along with  
a Message Sending Failure notice on the  
screen. Another attempt will be made to  
send the failed message and after two  
unsuccessful attempts, the message will no  
longer be sent automatically. In order to send  
the message that has failed, you must touch  
to resend the message.  
]View Status: Displays the message status  
as Failed, Sent, or Error.  
]Edit: Allows you to edit the selected  
message.  
]Select Slide: If the multimedia message  
has more than one slide, you can select and  
move to the desired slide.  
]View attachment: Allows you to view the  
attachment of the message.  
The Outbox folder saves the most recent sent  
messages in chronological order. Touch  
use the following options available:  
to  
]Message Details: Allows you to view  
information about sent messages, such as  
Type, Subject, sender’s address, and Time.  
46  
 
Messaging  
- Delete: Allows you to delete the selected  
template message.  
Message settings  
To configure Messaging settings, touch  
from the standby screen,  
Message settings.  
- Delete All: Deletes all messages in the  
folder.  
, then touch  
To edit an existing Template, touch it (to  
open), then touch the text. The Edit screen  
will automatically open.  
Message Alert  
Allows you to set the message alert sounds,  
volume, and alert type.  
]Text Message center: The details for the  
Message Center are pre-loaded onto your  
handset and should not be changed.  
Save To  
Allows you to choose between saving the  
message to the Phone or SIM Card.  
]Email Gateway: The details for the Email  
Gateway are pre-loaded onto your handset  
and should not be changed.  
Signature  
]Message Subject: Allows you to activate  
or deactivate the Subject field in an SMS.  
This feature allows you to create a signature  
to send with outgoing messages. You can use  
symbols, templates, and contacts as part of  
the signature.  
]Insert Signature: Allows you to insert  
the signature you created to outgoing  
messages.  
Text Message  
]Text templates  
There are 9 predefined messages in the  
list. You can view and edit the template  
messages or create new ones.  
The following options are available when  
you touch  
:
47  
 
Messaging  
]Download Options  
Multimedia Message  
- Download Without Asking: Allows  
Multimedia Messages to be downloaded  
automatically.  
]Multimedia Templates: Allows you to  
create and edit multimedia templates.  
]Priority: Allows you to set the priority level  
to Low, Normal, or High.  
- Ask Always: Allows you to download a  
multimedia message manually.  
]Message Subject: Allows you to activate  
or deactivate the Subject field in an MMS.  
- Discard: Used when the user rejects  
download of the Multimedia Message.  
]Validity Period: This network service  
allows you to decide how long your  
multimedia messages will be stored at the  
message center.  
]Message Center: The details for the  
Multimedia gateway are pre-loaded onto  
your handset and should not be changed.  
]Send Delivery Receipt: Allows you to  
send a delivery confirmation alert for a  
Multimedia Message.  
Voicemail Number  
This menu allows you to set the voicemail  
center number if this feature is supported by  
AT&T. Please check with AT&T for details of  
their service in order to configure the handset  
correctly.  
]Send Read Receipt: Allows you to send  
a message read confirmation alert for a  
Multimedia Message.  
Service Message  
You can set the Service Message option to  
determine whether or not you will receive  
service messages.  
48  
 
Communications  
3. To save your password, scroll down to  
Remember Me (Save password) and  
touch it to check the box.  
Mobile Email  
Mobile Email allows you to access your  
Yahoo! Mail, AOL Mail, AIM Mail, Windows  
Live Hotmail, AT&T Mail, Gmail, and Other  
Providers accounts on your phone. Now you  
can quickly and easily check your email while  
you are away from your computer.  
4. Touch Sign In.  
]Opening an Email: Scroll down and touch  
the email to highlight the message you  
want to open, then touch again to open  
the message. When the email is open,  
touch Options to reply, forward, delete,  
and more.  
To Set Up Mobile Email  
]Open Mobile Email: From the standby  
screen, touch  
and then touch  
.
]Deleting an Email: Scroll down to the  
email you want to delete, touch the subject  
line to highlight it, touch Options, touch  
Delete, and touch Delete once again.  
]Select an Email Provider: Touch the  
email provider you wish to use.  
]Read and Accept the Terms of Use  
]Log In  
1. Touch the user ID/email address field and  
enter your information.  
2. Touch the Password field and enter your  
password.  
Quick Tip: Your password is case  
sensitive.  
49  
 
Communications  
Offline Menu  
]Sign In: This allows users to login by filling  
in the User ID and Password.  
IM  
The Instant Messaging feature can only be  
used with the support of the network operator  
or communities such as AIM®, Windows  
Live™, and Yahoo!® Messenger. For Instant  
Messaging users, a valid User ID, and  
Password will be required in order to login  
and exchange messages as well as checking  
the online status.  
nNote  
Once the User ID and Password are saved, you  
will not be required to type them in again during  
the Login process. This feature is optional.  
]Saved Conversations: Allows you to view  
saved conversations.  
To access the IM feature  
]Offline Conversations: Allows you to  
view offline conversations.  
1. Touch  
and then touch  
.
2. You can see available IM clients. The menu  
items below might not appear as not all IM  
communities support the various options.  
In addition, the menu strings may appear  
differently. This depends on the selected  
IM communities. The keywords such as  
User ID, Login, and Contact will be used  
as general terms in IM menus according to  
the currently selected communities such  
as AIM®, Windows Live™, and Yahoo!®  
Messenger  
Settings  
]Set Sound: Allows you to turn alerts  
On/Off for a Contact when they have  
activity on their session.  
]Network: You may check your Network  
Profiles and Server Address information.  
50  
 
Communications  
IM Information  
General Options  
This displays the Instant Messaging Client  
Information such as Client Name and Version  
Number.  
Touch  
to view the following options:  
Online Menu /  
1-to-1 conversation  
After a successful Login, a list of contacts  
with Screen Names will appear on the screen.  
Touch and hold each item, it will show various  
menu pop up.  
]My Status: Allows you to set your status  
to Available, Away, or Invisible.  
51  
Communications  
]Add a Contact: Allows you to add a  
new contact to the selected contacts list;  
contacts are searched on the basis of  
Screen Name.  
Touch and hold a conversation.  
]Send Message to: Allows you to send a  
message to someone by entering a Screen  
Name.  
]Block List: Displays the list of all blocked  
Contacts.  
]Saved Conversations: Allows you to view  
saved conversations.  
]Settings:  
]End Conversation: This closes the  
selected conversation. If an unknown  
contact was selected, that contact is  
deleted.  
- Display Name  
- My Status: Allows you to set your status  
to Available, Away, or Invisible  
]Block/Unblock: This allows you to block/  
unblock the selected Contact.  
- Offline Contacts  
- Set Sound: Allows you to turn alerts On/  
Off for a Contact when they have activity  
on their session  
]Buddy Info: This allows you to view the  
User ID and Status information.  
- Auto Sign In  
52  
Communications  
Touch and hold a Contact List.  
Touch and hold a Contact.  
]Refresh: This refreshes the current  
information on the contacts within the list.  
]Delete Buddy: This deletes the selected  
contact.  
]Block/Unblock: This allows you to block/  
unblock the selected Contact.  
]Set Alert : This allows you to set an alert.  
]Buddy Info: This allows you to view the  
User ID and Status information.  
53  
Communications  
]Settings:  
Menu options available in the  
Conversation screen  
]Insert: Allows you to enter emoticons and  
- My Status: Allows you to set your status  
to Available, Away, or Invisible.  
text templates in the conversation screen.  
- Away Message  
]Back to List: Allows you to go back to  
your contact list.  
- Set Sound: Allows you to turn alerts On/  
Off for a Contact when they have activity  
on their session.  
]Block/Unblock: This allows you to block/  
unblock the selected Contact.  
- Auto Sign In  
]Save Conversation: Saves the currently  
active conversation.  
]Minimize: Minimizes the IM window and  
returns to standby mode.  
]End Conversation: This ends the active  
conversation and clears the conversation  
buffer.  
]Sign Out: Signs you out of the IM client.  
nNote  
• The maximum number of characters  
supported by a message is 512 characters for  
receiving, and 159 characters for sending.  
]Extract: If a phone number or email  
address is in the message’s text, the phone  
will identify it and allow you to save it.  
• The current information might not update  
in real time so the “Refresh List”/”Refresh  
Contact” option can be used for the most up  
to date status.  
54  
Communications  
PicDial  
PicDial allows you to share your online profile  
picture and status, or any picture you choose,  
as your Caller ID.  
When you change your picture or status, it is  
automatically updated on your friends’ phone.  
You can also get photos automatically for  
your contacts.  
To access PicDial  
1. Touch  
touch  
from the standby screen. Then  
.
2. Touch Accept to accept the Terms and  
Conditions.  
3. Touch Next.  
4. Enter your phone number and name.  
5. After the phone verifies and creates your  
account, choose your social networking  
sites and enter your login information. Then  
touch Next.  
6. Follow the prompts to configure the  
application to your personal needs.  
55  
 
Mobile Web  
Mobile Web  
This application connects you to the Internet.  
You are connected to AT&T’s homepage by  
default.  
This menu shows how to access the Internet  
by launching the mobile browser.  
Mobile Web is one of the services provided by  
AT&T and it gives you access to all the cool  
things you can do with your wireless phone.  
nNote  
Check the availability of mobile browser  
services, pricing, and tariffs with your network  
operator and/or the service provider whose  
service you wish to use. Service providers will  
also give you instructions on how to use their  
services.  
Please contact your service provider to open an  
Internet account.  
To launch the browser from the standby  
screen, touch  
,
, and then  
.
Once connected, the homepage is displayed.  
To exit the browser at any time, press the  
key.  
56  
 
YPmobile  
Unleash the power of YELLOWPAGES.COM  
local search on your mobile phone.  
Find a business, get maps and directions, and  
save your favorites - our mobile app gives  
you what you need, whenever and wherever  
you need it.  
]Search for local businesses.  
]View ratings and call businesses.  
]Save businesses for future access.  
]Get maps and view step-by-step directions.  
* For more information, refer to  
www.yellowpages.com  
To access YPmobile  
From the standby screen, touch  
and  
,
,
.
57  
 
AT&T Navigator  
To access AT&T Navigator  
]A Search feature that allows you to find  
businesses or points of interest near your  
current location, an airport, a waypoint, or  
any other entered address. You can read  
ratings and reviews for businesses and  
easily call the business that you have found  
to check on the availability of an item or to  
make a reservation. You can navigate to the  
business location now or save the address  
for later use.  
From the standby screen, touch  
and  
,
,
.
The AT&T Navigator application on your  
device uses GPS position determination  
technology and access to your carrier’s data  
network to provide you with driving directions  
and a host of other services, including:  
]GPS navigation that gives you turn-by-turn  
directions to any destination address in  
the continental United States. If you miss  
a turn or get off-track, AT&T Navigator  
will calculate a new route for you. You can  
enter a destination address by using AT&T  
Navigator’s automatic voice recognition  
system or by typing on the device’s keypad.  
]Maps of the area around your current  
location, around a marked waypoint, or  
around an address that you had previously  
entered. You can pan the map (adjust left,  
right, up, or down) and zoom in or out.  
You can also mark a point under the cursor  
as a waypoint.  
]Audio and visual traffic alerts while driving  
or viewing maps, as well as traffic re-  
routing capabilities to minimize delays on  
your trip.  
]A compass-like indicator presenting your  
direction of travel, location, and speed.  
58  
 
AT&T Navigator  
]The ability to personalize your application  
preferences by selecting U.S. customary  
or metric distance units, the language for  
audible guidance, and more.  
nNote  
For best GPS performance.  
• In order to improve GPS antenna sensitivity,  
do not cover the GPS antenna area of the  
device.  
You can also use many of AT&T Navigator’s  
features on the TeleNav website, such as  
getting driving directions (Route Planning) and  
using the Search function to find businesses,  
churches, schools, and government offices.  
You can also use the TeleNav website to add  
an address to your My Favorites list, manage  
your My Favorites and Recent Places lists, and  
shop at the TeleNav Store.  
• Your GPS antenna sensitivity might be  
weakened if you are in a high rising building,  
underground, or location surrounded by metal  
or concrete.  
• Use near the window indoors for better GPS  
antenna sensitivity.  
• For battery durability, please use vehicle  
power adapter in your car.  
• It could take 2~3 minutes to get your GPS  
position depending on the condition of the  
environment or network.  
59  
Find  
Where  
My-Cast Weather  
This application allows you to get up-to-date  
weather information, including radar & map  
images, the forecast, and more!  
Where uses your location to help you find  
places, things to do, and local information  
when you’re on the go. Once you decide on  
your destination, Where makes it easy to get  
there with maps and directions.  
To access My-Cast Weather  
From the standby screen, touch  
and  
,
,
To access Where  
.
From the standby screen, touch  
and  
,
,
.
Wikimobile  
Wikimobile allows you to access to Wikipedia  
articles, including the article pictures and  
quick facts, on your mobile phone. You can  
bookmark your favorites for quick and easy  
access.  
To access Wikimobile  
From the standby screen, touch  
,
,
and  
.
60  
 
AppCenter  
To launch AppCenter, from the Standby screen  
Cool Tools/Apps  
touch  
and then choose  
from the  
This menu option connects to AT&T’s  
application download site. This allows you  
to download the various applications by  
connecting to the Internet.  
Entertainment tab.  
Ringtones  
This menu option connects to AT&T’s ringtone  
download site.  
nNote  
Additional charges may incur when  
downloading applications. Contact AT&T for  
additional information.  
nNote  
Additional charges may incur when  
downloading ringtones. Contact AT&T for  
additional information.  
Videos  
This menu option connects to AT&T’s video  
download site.  
Games  
This menu option connects to AT&T’s game  
download site. This allows you to download  
the various games by connecting to the  
Internet.  
nNote  
Additional charges may incur when  
downloading applications. Contact AT&T for  
additional information.  
nNote  
Additional charges may incur when  
downloading games. Contact AT&T for  
additional information.  
61  
 
AppCenter  
Color Graphics  
This menu option connects to AT&T’s graphics  
download site.  
nNote  
Additional charges may incur when  
downloading graphics. Contact AT&T for  
additional information.  
Answer Tones  
This menu option connects to AT&T’s Answer  
Tones download page. This allows you to  
shop for the newest, most popular Answer  
Tones.”  
MEdia Net Home  
This connects you to your MEdia Net Home  
page.  
62  
 
AT&T Music  
To launch AT&T Music, from the Standby  
nNote  
screen touch  
and then touch  
in the  
Copyrights of music files may be protected by  
copyright and intellectual property laws. Please  
ensure that you adhere to the applicable Terms  
of Use of materials laws prior to downloading or  
copying files. Music protected by Digital Rights  
Management software may not be playable.  
Entertainment tab.  
Music Player  
]All Songs: The songs in your music library  
will be displayed.  
Playing Music  
Touch All Songs for the drop-down menu  
To listen to music in your phone or the  
external memory, follow these quick easy  
steps:  
with the following options:  
- Playlists: Allows you to access or make  
your own playlists.  
1. From the Standby screen, touch  
, touch  
- Artists: Shows the list of artists of all the  
songs in your music library; touch an entry  
to see all the songs by the artist.  
from the Entertainment tab.  
2. Touch Music Player.  
- Albums: Shows the list of albums of all  
the songs in your music library; touch an  
entry to see all the songs on the selected  
album.  
- Genres: Shows the list of genres of all  
the songs in your music library; touch an  
entry to see the songs from that genre.  
- Shuffle: Touch this option to play your  
songs in a random order.  
63  
 
AT&T Music  
3. Touch All Songs to select Playlists, Artists,  
Albums, or Genres. You can also select  
Shuffle to play all your songs in a random  
order. The Now Playing menu (below) will  
become available once music is playing.  
nNote  
Music files smaller than 300kb may not  
be displayed in this function and may be  
categorized as Ringtones.  
Adding Music To Your Handset  
Music files can be added to your handset by  
using one or more of the following methods:  
]Download music and ringtones over the  
AT&T network directly to your device via the  
Shop Music link in the AT&T Music Folder.  
]From your existing digital media collection  
on your PC; synchronized via Windows  
Media® Player and/or Windows Explorer.  
]From your PC using other music subscription  
services, such as Napster or eMusic.  
]Touch  
While playing, touch  
volume. Touch  
the next song or previous song.  
]Touch to back out of menus without  
disrupting the music.  
to pause the selected song.  
to adjust the  
to skip to  
and  
64  
AT&T Music  
Purchasing and downloading  
Music directly to your Device  
Transferring Music using your  
PC  
1. Touch  
Entertainment tab.  
2. Select Shop Music.  
then touch  
in the  
Before You Get Started  
To transfer music from your PC to your device,  
you will need the following:  
3. Navigate the Shop Music page to  
download today’s hottest music and other  
personalized content directly to your phone.  
]Windows Media® Player 10 (or above) or  
other digital music management software  
such as Napster® or eMusic®.  
]A microSD™ card*  
(Up to 16GB supported)  
nNote  
• These actions are data intensive (i.e.  
previews via streaming) so the user should  
be enrolled in an unlimited data plan before  
using these services to avoid per-use data  
charges.  
]USB data cable*  
* microSD card and USB data cable sold  
separately; go to att.com/wireless for  
details.  
• Additional charges may apply when  
downloading music, ringtones etc.  
nNote  
• .mid, .wav, .mp3, and .aac files under 300 kb  
This device is not compatible with iTunes and/or  
iTunes files.  
can be set as ringtones.  
65  
AT&T Music  
nNote  
Transferring Music from the  
Digital Music Service  
1. Using your computer, open your preferred  
If you have a USB hub, connect the handset  
directly to your computer rather than through  
the hub.  
PC music management client.  
Transferring Music using  
Windows Media Player  
1. Open Windows Media® Player on your  
2. Locate the song in your library.  
3. Make sure the microSD™ card is inserted  
properly into the handset.  
computer (version 10.0 or higher).  
4. Use the USB adapter cable to connect the  
handset to the PC. .  
2. Use the USB adapter cable to connect the  
handset to the PC.  
5. Once the USB connection has been  
established, the handset displays  
“Connected“ and the computer screen then  
3. Once the USB connection has been  
established, the handset displays  
shows the  
device. If the  
“Connected“ and the computer screen then  
detection does not occur, skip to Changing  
USB Connection Settings section on  
page 69.  
shows the  
device.  
6. Follow the instruction in the program to  
transfer music to your handset.  
66  
AT&T Music  
7. Click the Start Sync button to download the  
selected songs to your handset.  
A “synchronization in progress” message  
appears on the application. Do not unplug  
the handset during this process. Once  
complete, the progress bar will disappear.  
nNote  
If the target computer does not detect the  
newly connected handset or provide an MTP  
Player dialog window on the PC screen, skip to  
Changing USB Connection Settings section  
on page 69.  
4. From within the Windows Media®  
Player application, click on the Sync tab.  
Previously downloaded songs are then  
listed on the left side of the application.  
8. It is now safe to unplug the USB connector  
from the handset.  
Drag and Drop Music Using  
As A Mass Storage  
Device  
5. Choose the destination location for the  
media files. The  
Music  
Sync Player appears in a drop-down list on  
the right side of the screen.  
1. Make sure the microSD™ card is inserted  
properly into the headset.  
6. Drag a song from the Library to the LG  
Music Sync Player on  
the right pane. Continue adding the desired  
songs.  
2. Connect the device to a PC using a  
USB data cable.  
3. A bubble may appear on the PC, “Found  
New Hardware LG USB Modem”.  
4. Access My Computer on the PC.  
67  
AT&T Music  
5. The phone’s memory card will be listed  
under “Devices with Removable Storage” in  
the same location as an optical drive.  
Changing USB Connection  
Settings  
1. Touch  
,
, and then  
.
2. Touch Connection.  
nNote  
The PC will automatically assign a drive letter.  
3. Touch USB Connection Mode.  
7. File explore in a new window for desired  
music files.  
4. Touch Music Sync (if using Windows  
Media® Player or other Digital Music  
Services) or Mass Storage (if you are going  
to drag or drop files).  
8. Drag and drop the desired music content  
from the PC window to the “Storage Card”  
window.  
5. Reconnect the device to a PC.  
9. Disconnect the device from the cable.  
Deleting Music Files  
The following are the three options available  
to delete Music from your Phone:  
10. Access the Music Player on the phone.  
nNote  
1. Delete a file using Mass Storage, but not  
using Music sync function.  
If the target computer does not detect the  
newly connected handset as Mass Storage,  
skip to Changing USB Connection Settings  
section below.  
2. Delete a file by directly inserting the  
microSD™ external memory onto the PC.  
3. Delete a file using delete function on the  
phone.  
68  
AT&T Music  
nNote  
nNote  
If you delete a playlist from the phone, the  
songs in the playlist will not be removed and  
remain in All songs folder.  
Do your file operations like Delete, Move and  
Copy using Music Sync.  
Some sites are data intensive (i.e. previews via  
streaming) so the user should be enrolled in an  
unlimited data plan before using these services  
to avoid per-use data charges.  
Additional charges may apply for downloading  
content or use of these services.  
Be aware that all of the existing data will be  
erased on microSD™ card if you use the below  
process.  
• Use the Memory Card function in the Settings  
menu (Menu > More > Phone > Reset  
Settings > Master Clear).  
• Format external memory using Mass Storage.  
Additional Music Services  
There may be other AT&T music applications  
preloaded or available, such as the following:  
]AT&T Radio : Listen to the latest Hip Hop,  
R&B, Rock, Jazz, or Country streaming  
commercial-free radio channels, anywhere  
you go.  
]MusicID: Identify the name, artist and  
album to a song from a song sample.  
]Music Videos : View the latest music  
videos.  
69  
 
MobiTV  
MobiTV En Español allows you to watch TV in  
Spanish and MobiRadio features commercial-  
free stations that are always on.  
MobiTV  
To access MobiTV from the Standby  
screen, touch  
, then touch  
in the  
Entertainment tab.  
MobiTV is a service that lets you watch live  
TV on your phone.  
The first time you open the application, you  
will be able to choose whether you want  
to use MobiTV, MobiTV En Español, or  
MobiRadio. Once you make a selection, it will  
be the default option every time you open  
MobiTV. If you want to switch services, touch  
Options and select Main Menu.  
70  
 
Games  
Access Games on your  
or  
Browse the catalog of games available to buy  
and download new ones.  
To launch Games while in the Standby  
screen, touch  
and choose  
in the  
Entertainment tab.  
Select from one of the many pre-loaded  
games or browse the available games with:  
]Shop Games: This menu option connects  
to AT&T’s game download site.  
nWarning  
Only J2ME (Java 2 Micro Edition) based games  
from the AT&T game store will work with this  
phone.  
Please note that J2ME and J2SE are not the  
same. J2SE is a PC-only technology.  
71  
 
Applications  
To launch Applications while in the Standby  
Loopt  
screen, touch  
and select  
in the  
Loopt shows you where friends are located  
and what they are doing via detailed,  
interactive maps on their phones. Loopt  
helps friends connect on the fly and navigate  
their social lives by orienting them to  
people, places, and events. You can also  
share location updates, geo-tagged photos,  
and comments with friends in their mobile  
address book or on online social networks,  
communities, and blogs.  
Entertainment tab.  
This menu displays the list of Java (J2ME)  
applications downloaded and installed on  
the phone. The applications can be opened,  
deleted within the Application menu. To see  
an application’s available information section,  
touch the information icon.  
Shop Applications  
This menu option connects to AT&T’s  
application download site. This allows you  
to download the various applications by  
connecting to the AppCenter.  
To access Loopt  
From the standby screen, touch  
, and  
,
,
.
Mobile Banking  
Browser  
This menu option allows you to use the  
alternative WAP browser.  
This application provides easy access to your  
banking account from your phone, where you  
can view your account balances and history,  
transfer funds, receive and pay bills and more.  
If your bank is not on the Featured Providers  
list, be sure to search using the Search All  
option. If your banking institution doesn’t  
currently participate, check back frequently as  
new banks are joining all the time.  
72  
 
Camera  
Touch  
and choose  
in the  
Entertainment tab.  
Take Photo  
Using the camera built into your phone,  
you can take pictures while on the move.  
Additionally, you can send photos to other  
people with picture messages.  
Shortcut: From the Standby screen, press the  
Camera key  
.
73  
 
Camera  
Getting to know the viewfinder  
Normal View  
Capture : Take a picture  
Options View  
Gallery  
Scene mode  
Shot mode  
Brightness  
Settings: Touch this icon to open the settings menu. See the  
next page for details.  
Image Size  
Go to Video Camera  
Back: Touch to return to the previous screen.  
nNote  
The shortcut options disappear after a few seconds automatically.  
To recall the options, touch the screen again.  
74  
Camera  
nNote  
Settings Menu  
In Take Photo mode, you can adjust the zoom  
with the side volume keys. The maximum zoom  
levels depend on the resolution as follows.  
]View Mode: Choose between Full Image  
and Full Screen.  
]Color Effects: Includes options Off/Black &  
White/Negative/Sepia.  
Resolution  
2048*1536  
1600*1200  
1280*960  
640*480  
Zoom scale  
No Zoom Available  
No Zoom Available  
X1.0 ~ X2.0  
]White Balance: Set the White Balance  
as Auto/Incandescent/Sunny/Fluorescent/  
Cloudy.  
]Quality: Set the image quality as Super  
Fine/Fine/Normal.  
X1.0 ~ X2.0  
400*240  
X1.0 ~ X2.0  
]Self Timer: Set the Timer can be set to  
Off/3 Seconds/5 Seconds/10 Seconds.  
320*240  
X1.0 ~ X2.0  
]Memory: Choose to save a photo to  
External or Handset.  
]Hide Icons: Can be set to Automatic or  
Manual.  
]Noise Reduction: Set the Noise Reduction  
can help removing noise in low light.  
]Shutter Sound: Can be set to Shutter 1/  
Shutter 2/Shutter 3/No Sound.  
]Grid Screen: Can be set to Simple cross/  
Trisection/Off.  
]Reset Settings: Allows you to set to the  
default settings.  
75  
 
Camera  
Record Video  
When recording video, you have many of the same Settings options as with taking a photo.  
Getting to know the viewfinder  
Clean View  
Recording start  
Gallery  
Normal View  
White Balance  
View Mode: Choose between Full  
Image and Full Screen.  
Video Size  
Brightness  
Settings: Touch this icon to open the settings menu.  
Video Share: If this option is available, you can make a Video Share call.  
Tap to open the Contacts list and make the call.  
Go to Camera: Change from video camera to camera mode.  
Zoom: Tap to access the zoom bar.  
Back: Touch to return to the previous screen.  
76  
 
Camera  
nNote  
Settings Menu  
In Video Record mode, you can adjust the zoom  
with the side volume keys. The maximum zoom  
levels depend on the resolution as follows.  
]Duration: Allows you to choose between  
General, which provides a longer recording  
time, and MMS, which provides a short  
recording time in order to be able to send  
the video clip in a multimedia message.  
Resolution  
320*240  
Zoom scale  
X1.0 ~ X2.0  
X1.0 ~ X2.0  
]Color Effect: Includes options of options  
Off/Black & White/Negative/Sepia.  
176*144  
]Quality: Determines the quality of a video  
clip. Includes options for Super fine/Fine/  
Normal.  
Camera Album  
You can view the Album containing your  
pictures and videos. For more available  
]Memory: Choose to save a video clip to  
External or Handset memory.  
options, touch  
.
Sort By/Send Via/Print/Slide Show/  
Delete/Album Theme/One by One View/  
Delete All.  
]Hide Icons: Can be set to Automatic or  
Manual.  
]Voice: Mute or unmute the voice.  
]Reset Settings: Allows you to set to the  
default settings.  
77  
 
My Stuff  
Audio  
From the standby screen, touch  
Video  
From the standby screen, touch  
,
,
,
,
and choose Audio.  
and choose Video.  
]Shop Tones: This menu option connects to  
AT&T’s ringtone download site.  
]
]
Shop Videos: Connects to AT&T’s  
video download site.  
]Answer Tones: This menu option shows  
the list of the sites which are related to  
AT&T’s Answer Tones.  
Record Video: Opens the Video  
Camera application and allows you to  
record a new video clip.  
]Voice recorder: Allows you to record your  
]You can also view the video files in the list.  
own audio.  
nNote  
]You can also view the audio files in the list.  
DRM sometimes restricts some functions, such  
as send and edit.  
Pictures  
From the standby screen, touch  
,
,
Alarm Clock  
and choose choose Pictures.  
From the standby screen, touch  
,
,
]
]
Shop Wallpapers: Connects to  
AT&T’s graphics download site.  
and choose Alarm Clock.  
The alarm function allows you to set up  
Take a Picture: Opens the Camera  
application and allows you to take a new  
picture.  
multiple separate alarms. You can also set  
the time, repetition interval and alarm sound.  
Select your desired alarm configuration from  
the alarm list. If there is no alarm setting,  
.
]
Make Animated GIF: Allows you to  
create an animation file with the images  
in the list.  
]You can also view the graphic files in  
the list.  
78  
 
My Stuff  
]Time: Select the desired set time mode.  
You can also enter your desired alarm time  
by specifying the hour and minutes. If the  
time is in the 12 hour format, select either  
AM or PM by touching it.  
Memory Card  
This function shows the files in the external  
microSD™ card memory.  
From the standby screen, touch  
,
,
and choose Memory Card.  
]Repeat: Select the desired repeat mode.  
]Alarm tone: Select the desired alarm  
sound.  
Other Files  
When you receive files of an undefined format  
(such as .vcs, .vcf, etc.) via email, the files are  
saved in this folder.  
]Volume: Set the desired volume level for  
the alarm.  
]Alarm Type: Select the desired type of  
alarm.  
From the standby screen, touch  
,
,
and choose Other Files.  
]Memo: Enter an alarm name.  
The following options are available by  
touching  
]Snooze Interval: Allows you to set the  
snooze interval to Off, 5 Minutes, 15  
Minutes, 30 Minutes, 45 Minutes or I Hour.  
.
]Send Via: Allows you to send the selected  
file via Message or Bluetooth.  
Touch  
to save your new  
]Move: Allows you to move selected files to  
the Phone Memory or Memory Card  
(if applicable).  
Alarm.  
]Copy: Allows you to copy selected files to  
the Phone Memory or Memory Card  
(if applicable).  
]Delete: Allows you to delete the selected  
file.  
79  
 
My Stuff  
]Rename: Allows you to edit the name of  
the selected file.  
]Create new folder: Allows you to create  
a new folder.  
]Sort By: Allows you to sort the folders by  
Date, Type, or Name.  
]Delete All: You can delete all files and  
folders.  
]Used Space: Allows you to view the used  
space in the Phone Memory or Memory  
Card.  
80  
Tools and Settings  
Send My Number  
Call  
This network service allows you to set your  
phone number to be displayed (On) or hidden  
(Off) from the person you are calling. You  
can select Set by Network if you prefer to  
have different settings for different service  
providers.  
To access the Call menu from the standby  
screen, touch and choose  
,
.
Call Forwarding  
When this network service is activated, you  
can direct your incoming calls to another  
number, for example, to your voice mailbox  
number. For details, contact AT&T. Select one  
of the divert options, for example, select If  
Busy to divert voice calls when your number is  
busy or when you reject an incoming call.  
Auto Redial  
If set to On, your phone redials the number  
you're trying to call up to 10 times after you  
hear a quick, busy signal. Press  
the call attempts.  
to stop  
The following options are available:  
This feature attempts to redial numbers that  
are engaged due to the wireless network. It  
does not redial numbers to an engaged party.  
]All Voice Calls: Forwards voice calls  
unconditionally.  
]If Busy: Forwards voice calls when the  
phone is in use.  
nNote  
There will be no alert indicating the call has  
been connected. You must stay on the line to  
hear when the call is connected.  
]If No Answer: Forwards voice calls which  
you do not answer.  
]If Out of Reach: Forwards voice calls  
when the phone is switched off or out of  
coverage.  
]Deactivate All: Turns off all call  
forwarding options so that all incoming  
calls are received by your handset.  
81  
 
Tools and Settings  
Answer Mode  
Call Reject  
This allows you to determine how to answer  
the phone.  
This menu allows you to turn Call Reject On  
or Off for all numbers or the numbers in the  
Call Reject List.  
]Any Key: You can answer an incoming  
Clear  
call by touching the  
key,  
Multi-Tasking key.  
]Send Key Only: You can only answer an  
,
Clear  
]Call Reject On/Off: This feature allows  
you to choose whether to reject incoming  
calls or calls from specific phone numbers.  
When the Reject All Calls option is set,  
all incoming calls are routed directly to  
Voicemail. Reject on List allows you to  
enable Call Reject for the numbers saved on  
your Call Reject List.  
Camera key, and the  
incoming call by pressing the  
key.  
Minute Minder  
This option allows you to specify whether the  
phone will beep every minute during a call to  
keep you informed of the length of the call.  
]Call Reject List: After touching  
, you can add to the call  
reject list by selecting Contact List or  
New Number. When you add a number to  
the Call Reject List, you can add the number  
by entering it directly or by searching for  
the number in the Contact List.  
Call Waiting  
The network will notify you of a new incoming  
call while you have a call in progress. Select  
Activate to request the network to activate  
call waiting, Deactivate to request the  
network to deactivate call waiting or View  
Status to check if the function is active.  
Send DTMF Tones  
Select from  
/
.
82  
 
Tools and Settings  
You can also exchange, for example, business  
cards, calendar items and pictures.  
TTY  
Select from TTY On/TTY Off.  
Music Playing is supported through a  
Bluetooth® headset.  
Time & Cost  
Allows you to check Call Duration and Data  
Counter.  
Hands-free profile  
This icon appears when the hands-free  
profile is used between the hands-free  
device and the phone. This allows you to  
call using a Bluetooth® connection.  
Bluetooth  
To access the Bluetooth menu from the  
standby screen, touch  
,
and  
.
A2DP profile  
Your phone has built-in Bluetooth® wireless  
technology, which makes it possible for you  
to connect your phone wirelessly to other  
Bluetooth® devices such as a hands-free  
device, PC, PDA, a remote screen or other  
phones. The devices registered in your phone  
can only be connected one at a time. (To make  
a connection to the same type of device or  
change Bluetooth® preferences, disconnect  
the existing device first.)  
This icon appears when the A2DP profile  
is used between the stereo headset  
device and the phone. This allows you  
to listen to an audio clip. A2DP is the  
Advanced Audio Distribution Profile,  
which provides support for streaming  
either mono or stereo audio using  
Bluetooth®.  
Hands-free + A2DP profile  
This icon appears when both profiles of  
the hands-free and the A2DP are used  
between the compatible device and  
the phone. This allows you to call and  
listen to an audio clip using a Bluetooth®  
connection.  
You can have a conversation via a cordless  
Bluetooth® hands-free phone or browse the  
Internet, wirelessly connected, via a mobile  
phone.  
83  
 
Tools and Settings  
When using each device, make sure to consult  
the manual that comes with the device.  
nNote  
We recommend that your phone and the  
Bluetooth® device you are communicating  
with be no more than 10 meters apart. The  
connection may be improved if there are no  
84  
Tools and Settings  
4. Touch the desired device and enter the  
- Primary Storage: Allows you to choose  
a location to save data received using  
Bluetooth.  
password. If you would like to search  
Refresh  
again, touch  
.
]My Devices: This function allows you to  
view the list of all devices that are paired  
with your phone.  
Sound  
To access the Sound menu from the standby  
screen, touch  
]My Bluetooth Info: This menu allows you  
,
, and  
.
to configure the profile for Bluetooth®.  
Shop Tones  
Connects to AT&T ringtone download site.  
- My Device Name: Allows you to change  
the handset's name that can be seen by  
other Bluetooth® devices.  
Ringtone  
]Sounds: Shows and plays ringtones.  
You can select your preferred ringtone by  
touching the ringtone listed.  
- Supported Services: Displays all  
services that the handset supports.  
]Volume: Allows you to control Ringtone  
volume.  
]Alert Type: Supports 3 ring alert types:  
Ring, Ring & Vibrate, and Ring after Vibrate.  
85  
 
Tools and Settings  
]Increasing Ringtone: Allows you to  
activate or deactivate the Increasing  
Ringtone feature, which is played when you  
receive an incoming call.  
Alert Tone  
]Sounds: Allows you to select a set of alert  
tones. Supports 2 alert tone types.  
]Volume: Allows you to control Alert Tone  
Message Tone  
volume.  
]Sounds: Shows and plays message tones.  
You can select your preferred ringtone by  
touching the ringtone listed.  
]Alert Type: You can elect to turn Alert  
Tones to Ring or Silent.  
Multimedia  
Allows you to adjust the Multimedia volume.  
]Volume: Allows you to control Message  
Tone volume.  
]Alert Type: Supports 6 message alert  
types: Ring Once, Ring Every 2 Min., Ring  
Every 15 Min., Ring & Vibrate, Vibrate,  
and Silent.  
Call  
Allows you to adjust the Call volume.  
Power On/Off Tones  
Allows you to set Power On/Off Tones to  
Ring or Silent.  
nNote  
Full length music tracks cannot be set as either  
ringtones or message tones.  
86  
 
Tools and Settings  
Backlight Timer  
Display  
This menu allows you to set the duration of  
the touch screen backlight.  
To access the Display menu from the standby  
screen, touch  
,
, and  
.
Themes  
Shop Wallpapers  
Allows you to change the whole look of  
display. Drag the screen from right to left (or  
vice versa) and touch  
Connects to AT&T’s graphics download site.  
Wallpapers  
to  
change the display theme to Black or White  
This menu allows you to set a picture or a  
color as your wallpaper. You may also choose  
to have no wallpaper.  
Menu style  
Allows you to change the Main Menu style to  
Tab or Screen by Screen.  
Fonts  
Allows you to configure the Dialing font size  
and Dialing font color. You can also configure  
the menu font size.  
Brightness  
Allows you to set the brightness of the  
display screen.  
87  
 
Tools and Settings  
]Settings  
Tools  
Storage: When the Memory Card is  
inserted, you can assign the default  
storage to External or Handset memory.  
To access the Tools menu from the standby  
screen, touch , and  
,
.
Voice Recorder  
Use the Voice Recorder to record voice  
memos or other sounds.  
Recording mode: MMS record mode  
shortens the time so that the recording  
can fit in an MMS and General mode  
provides longer recording time.  
Record  
]Touch  
Touch  
to start recording.  
Pause  
to pause recording. To  
Resume  
continue recording, touch  
recording, touch  
. To stop  
Stop  
. The recording  
will be saved automatically.  
88  
 
Tools and Settings  
Voice Command  
Voice Command is the function whereby  
your phone’s voice recognition engine  
identifies the voice of the user and carries  
out the requested commands. When the user  
operates the Voice Command function, there  
are six possible commands, Call <Name or  
Number>, Listen Voicemail, Missed Calls,  
Messages, Time & Date, and Play or Playlist.  
1. Call <Name or Number>: This function  
is activated only when the user says the  
command "Call" followed by the name  
stored in the Address Book or specified  
phone number. The voice engine inside the  
handset recognizes the user's utterance  
and displays name lists or phone numbers  
from the phone's Address Book. However,  
interfering noise might cause a problem  
displaying candidates. Additionally, the user  
has the option to superimpose a number  
type at the end, such as “mobile”, “home”,  
“work” or “other”.  
New  
]To start a new recording, touch  
.
Play  
]To play the recording, touch  
.
Delete  
]To delete the recording, touch  
to confirm.  
and Yes  
]To send the recording by Message or  
Bluetooth, touch , Send Via, and  
Message or Bluetooth.  
• Commands available to user  
- Yes: Make the phone call.  
- No/Next: Moves to the next missed call  
list.  
89  
 
Tools and Settings  
- Cancel: Go back to the main Voice  
Command menu.  
5. Time & Date: This command is activated  
when the user says the words "time and  
date". The phone displays the current local  
time and date.  
- Exit: Exits Voice Command.  
2. Listen Voicemail: This command is  
activated when the user says the words  
"Listen Voicemail". The user will then be  
automatically connected to Voicemail.  
6. Play or Playlist: This comment is  
activated when the user says the words  
“Play” or “Playlist”. The phone plays all  
songs in the music list.  
3. Missed Calls: This command is activated  
when the user says the words "Missed  
Calls". The mobile phone presents the  
missed call lists.  
The Voice Command function also has options  
accessible by pressing  
when in the Voice  
Command screen. The following options are  
available:  
• Commands available to user  
• Mode  
- Yes: Make the phone call.  
- Speed: Voice Command is abbreviated.  
- No/Next: Moves to the next missed call  
list.  
- Normal: Voice Command is played  
normally.  
- Cancel: Go back to the main Voice  
Command menu.  
- Exit: Exits Voice Command.  
4. Messages: This command is activated  
when the user says the word "Messages".  
The phone displays details of unread SMS  
or MMS messages.  
90  
Tools and Settings  
• Best Match  
• Speakerphone mode  
- 1 Match: The most likely match will be  
displayed when finding a number from the  
Address Book.  
- Automatic On: When this option is  
selected, sound is loud enough so you can  
hear the output when the phone is away  
from the ear, at a distance.  
- 4 Matches: The four most likely matched  
names will be displayed when finding  
names from the Address Book.  
- Off: When this option is selected, sound  
is quieter and can only be heard through  
the Earpiece.  
• Sensitivity  
• Call Alert  
- High: Operation and performance of  
the voice recognition engine is rarely  
affected by the user's voice command and  
surrounding sound.  
- Ring Only: Rings repeatedly when you  
receive a call.  
- Ring After Name: States the name of  
the saved contact once and then rings  
repeatedly when you receive a call.  
- Medium: Operation of voice recognition  
engine is normally affected by user's voice  
command and surrounding sound.  
- Name Repeat: States the name of  
the saved contact repeatedly when you  
receive a call.  
- Low: Operation of voice recognition  
engine is strongly affected by user's voice  
command and surrounding sound.  
91  
Tools and Settings  
]View all: Allows you to view all saved  
schedules.  
Calendar  
The Calendar function allows you to schedule  
events and helps to remind you with alerts.  
]Week view: Allows you to change  
Calendar view mode from Monthly View to  
Week view.  
To access Calendar from the standby screen,  
Calendar  
touch  
,
,
and  
.
]Go to date: Allows you to jump to a  
specific date.  
When you enter this menu, a calendar will be  
displayed. The red square cursor is used to  
locate a particular day. The bottom bar on the  
calendar indicates schedule(s) for that day.  
The phone will sound an alarm tone if it has  
been set for a specific schedule item.  
]Selective Delete: Allows you to delete  
Old schedules or All Schedules selectively.  
]Settings: Allows you set Default View and  
the day the weeks starts on.  
The following options are available when you  
Notepad  
open the Calendar function and touch  
.
The Notepad function allows you to create up  
to a maximum of 100 memos.  
]New Schedule: Allows you to add a new  
schedule on the date you select.  
1. From the standby screen, touch  
,
,
]Search: Allows you to search the saved  
schedule(s).  
Notepad  
and  
.
2. To create a new Note, touch  
]Set holiday: Allows you to set a personal  
holiday for the selected date.  
, enter the memo, and  
to save.  
touch  
92  
 
Tools and Settings  
]Touch an area in the country where the  
city is located. A list with available cities  
will pop up. Touch the desired city. If  
there is only one city available in the area  
selected, you will see that city’s date and  
time information on the bottom side of the  
World Clock  
The World Clock function provides time and  
date information for major cities worldwide.  
nNote  
The first time you use this function, you will be  
asked to enter the name of your current city.  
screen. Touch  
to add that city.  
1. From the standby screen, touch  
,
,
World Clock  
, and  
.
Add city  
2. To add a new city, touch  
.
3. Scroll down and touch the desired city from  
the list of available cities.  
]To make it easier, touch  
to display  
a globe. Scroll left or right to find the  
continent where the city is located and  
touch it.  
93  
 
Tools and Settings  
]Sort By: Allows you to sort your tasks by  
Date, Status, or Priority.  
Tasks  
The Tasks function allows you to save and  
manage a task.  
Stopwatch  
1. From the standby screen, touch  
,
,
The Stopwatch function allows you to record  
the elapsed time of an event. The duration of  
an individual lap time (up to 99 times) and the  
total time can also be displayed.  
Tasks  
, and  
.
New task  
2. Touch  
.
3. Enter the Date, Note, and Priority for the  
To access Stopwatch from the standby screen,  
new task.  
Stopwatch  
touch  
,
,
, and  
.
Save  
4. Touch  
to save the task  
]New Time  
item.  
1. To start timing, touch  
The running time is displayed as  
.
The following options are available by  
pressing in the main Tasks menu:  
HH.MM.SS.hh (hours, minutes, seconds,  
hundredths of a second).  
]New task: Allows you to create a new  
task.  
2. During the timing, you can record an  
individual lap time by touching  
Up to 99 lap times can be recorded.  
]Delete: Opens the menu from where you  
can select Tasks to delete.  
.
]Delete All: Allows you to delete all  
completed tasks or all past tasks.  
3. You can stop timing by touching  
and restart by touching  
.
]Send: Allows you to send the selected task  
via text message, multimedia message, or  
Bluetooth.  
4. To reset the stop watch, touch  
.
]Saved Times: Allows you to see the saved  
recorded times.  
]View calendar: The Calendar window will  
display, from which you will also be able to  
create new tasks.  
94  
 
Tools and Settings  
Calculator  
Unit Converter  
The Calculator function allows you to  
calculate simple mathematical equations.  
The Unit Converter function converts any  
measurement into a unit you want.  
To access Calculator from the standby screen,  
To access Unit Converter from the standby  
Calculator  
touch  
,
,
, and  
.
screen, touch  
Unit Converter  
,
,
, and  
.
Tip Calculator  
The Tip Calculator function allows you to  
quickly and easily calculate the tip amount  
and total owed based on the total bill,  
tip percentage, and the number of people  
splitting the bill.  
There are 7 types of units that can be  
converted: Currency, Area, Length, Weight,  
Temperature, Volume, and Velocity.  
To access Tip Calculator from the standby  
screen, touch  
Tip Calculator  
,
,
, and  
.
95  
 
Tools and Settings  
Touch  
Date & Time  
From the standby screen, touch  
From the standby screen, touch  
and  
,
,
,
,
.
and  
.
This menu allows you to customize various  
Touch settings. You can personalize the  
Touch Screen Feedback to Vibration, Sound,  
Vibration & Sound, or Silent.  
]Date Format: Allows you to change the  
date format to any of the options below.  
MM/DD/YYYY (month/date/year)  
DD/MM/YYYY (date/month/year)  
YYYY/MM/DD (year/month/date)  
You can also choose the Vibration Type and  
adjust the Vibration Intensity. It is also  
possible to set a sound type and adjust its  
volume as Touch Screen Feedback.  
]Time Format: Allows you to choose a time  
format between 12 Hours and 24 Hours.  
]Auto Update: Select  
to set the phone  
to automatically update the time and date  
according to the current local time zone.  
Select  
to manually set the Time &  
Date and Daylight Saving Time.  
96  
 
Tools and Settings  
Set Flight Mode  
More  
This function allows you to only use the  
phone's features that do not require the use  
of the wireless network. This is especially  
useful when you are in an airplane or in  
places where the wireless network is  
prohibited. If you set the Flight Mode to  
you will be prompted to confirm your  
selection. After you confirm it by touching  
From the standby screen, touch  
,
,
and  
.
Phone  
Languages  
,
Allows you to change the language for the  
display text on your phone. This change will  
also affect the Language Input mode. You can  
choose between Automatic, English, French,  
Spanish, or Korean.  
, the Flight Mode icon will be displayed  
on the screen instead of the network signal  
icon.  
Auto Key Lock  
This function allows you to set the amount of  
time before your screen locks automatically.  
You can set it to Off, 5 seconds, 15 seconds,  
30 seconds, or 45 seconds.  
97  
 
Tools and Settings  
Security  
Various codes and passwords are used to  
protect the features and settings of your  
phone. They are described in the following  
sections.  
]Phone Lock: You can use a security code  
to avoid unauthorized use of the phone.  
If you set Phone Lock to When Power On,  
the phone will request a security code  
whenever you switch the phone on. If you  
set Phone Lock to When SIM Changed, your  
phone will request a security code only  
when you change your SIM Card. If you set  
Phone Lock to Lock Phone Now, your phone  
will lock immediately.  
]
]
: You cannot make (or receive) any  
calls, including emergency calls, or use  
other features that require network  
coverage.  
]PIN Code Request: When the PIN Code  
: Deactivates Flight Mode and re-  
establishes your wireless connections.  
Request feature is set to  
, you must  
enter your PIN each time you switch the  
phone on. Consequently, any person who  
does not have your PIN cannot use your  
phone without your approval.  
98  
 
Tools and Settings  
nNote  
nNote  
Before setting the PIN Code Request feature to  
Off, you must enter your PIN.  
Not all SIM Cards have a PIN2. If your SIM Card  
does not, this menu option is not displayed.  
]Fixed Dial Number: This function allows  
you to restrict your outgoing calls to  
selected phone numbers, if this function is  
supported by your SIM Card. The PIN2 code  
is required.  
]Change Codes: The Change codes feature  
allows you to change your current password  
to a new one. You must enter the current  
password before you can specify a new  
one. You can change the access codes for:  
Security Code, PIN1, PIN2  
• FDN ON/OFF  
-
: You can only call phone numbers  
stored in the FDN List. You must enter  
your PIN2.  
Reset Settings  
This function allows you to restore factory  
settings. To do this, you need the security  
code.  
-
: You can call any number.  
]Master Reset: Restores the settings (e.g.:  
Sound, Display, Language, Date & Time,  
Bluetooth® Settings) stored in the handset  
memory to default values.  
]Master Clear: Deletes downloaded and  
user created contents (e.g.: images and  
videos) from the Phone and the Memory  
Card.  
99  
Tools and Settings  
• Phone  
Internet Profiles  
- Deletes all downloaded and user created  
Images, Videos, and Sounds from the  
Phone Memory.  
This menu shows the Internet Profiles. You  
can add, delete, and edit Internet Profiles by  
touching  
. However, you cannot delete or  
edit default configurations provided by AT&T.  
- Deletes personal information stored  
in the handset memory (e.g.: address  
book, messages, tasks, alarm, Calendar  
schedules) to default values.  
Access Points  
This menu shows the Access Points. You can  
register, delete, and edit by touching  
.
- Restores the settings stored in the  
handset memory to the default values.  
However, you cannot delete or edit default  
configurations provided by AT&T.  
Memory Card: Deletes all contents from  
the Memory Card.  
Start Up Guide  
This menu will start the animated guide. This  
guide will help you, using animated visuals,  
quickly learn some of the functions of your  
.
Connection  
USB Connection Mode  
You can transfer files from a compatible PC  
to the memory in your phone using the Mass  
Storage. When you connect the phone to a PC  
using the USB cable, this will be displayed as  
a removable disk through Windows Explorer.  
The USB Connection Mode determines how  
your phone will communicate with other  
USB devices when they are connected with  
a USB cable.  
100  
 
Tools and Settings  
Set Storage Defaults  
Touch Calibration  
This function allows you to set the Storage  
Default location for each case. When you  
need to save files from Camera, Internet  
Download, Bluetooth, and Voice Recorder,  
you can choose to save them to the Phone  
Memory or Memory Card. You can set each  
case separately or choose All and set the  
Storage Default all the same.  
This menu option will allow you to calibrate  
your touch screen. Follow the instructions on  
the screen to complete this task.  
Memory  
Used Space  
This function shows the status of the user  
memory of the handset.  
Application Settings  
This Menu allows you to adjust the settings  
to the following features on the phone:  
]Phone Common: This will display the  
memory currently used up in your phone  
and will categorize it by types of files using  
the memory.  
Video Share  
]Phone Reserved: This function shows the  
status of the reserved memory for the user  
(Text Message, Contacts, Calendar, Tasks,  
Notepad).  
]Audio Alert: Enable/Disable audio alert  
when Video Share is available.  
]Auto Record: Enable/Disable automatic  
recording of live Video Share.  
]Memory Card: Allows you to check the  
current status of the external memory card.  
Messaging  
]SIM Card: This function shows the status  
of the SIM Card user memory.  
To set the message settings from standby  
screen, touch  
,
, and choose Message  
settings.  
For more information regarding Message  
settings, please refer to page 47.  
101  
 
Tools and Settings  
Wap Browser  
nNote  
You cannot edit or delete pre-installed accounts.  
In order to create a new account, please fill in  
the network information.  
This menu allows you to customize your  
browsing experience by giving you the option  
of changing the following settings:  
1. Service Name: Name associated with new  
account.  
• Accounts  
2. Homepage: Homepage URL.  
This includes the network information used  
to connect the browser to the Internet. Select  
the desired account by tapping the screen.  
This will activate the account that will be  
used for future connections. MEdia Net is the  
predefined account that is set as default.  
3. Internet Profile: You can choose one from  
the Internet profiles.  
nNote  
1. AT&T has provided default settings regarding  
account information.  
The following options will be available when  
2. Creating or editing an account requires  
caution. The browser cannot connect to  
the Internet if the account information is  
incorrect.  
you touch  
:
]Delete: Allows you to delete an account.  
]Delete All: Allows you to delete all  
accounts.  
102  
Tools and Settings  
• Appearance  
• Clear Login Info  
Allows you to choose the settings of the  
browser appearance (Text Size, Character  
Encoding, Show image, JavaScript).  
Allows you to clear all your login info.  
• Rendering Mode  
Allows you to set the Rendering mode to  
Standard or Text Only.  
• Cache  
The web pages you have accessed are stored  
in the memory of the phone.  
• Security  
]Certificates: You can see the list of  
certificates and view them in detail.  
]Clear Cache: Remove all cached data in  
the memory.  
]Clear Session: Clears the secure session.  
]Allow Cache: Allows you to enable/  
disable the Cache.  
• Secure Pop-up  
You can control the pop-up which indicates a  
secure page or not.  
nNote  
A cache is a buffer memory, which is used to  
store data temporarily, especially when it is  
online.  
Voice Command  
For more information regarding Voice Command  
settings, please refer to page 90.  
• Cookies  
The information of services you have accessed  
are stored in what is called a Cookie.  
]Delete Cookies: Remove all Cookie data  
in the memory.  
]Allow Cookies: Allows you to enable/  
disable Cookies.  
103  
Tools and Settings  
Software Update  
Phone Information  
If new software exists, the AT&T server  
notifies devices using a WAP push message.  
Before updating new software and after  
downloading it from the AT&T server, users  
can decide whether they would like to  
postpone the operation. When the time is up,  
users are prompted again or users can resume  
the postponed operation using this menu at  
any time.  
This menu is used to view the Phone Number,  
Model Number, and Software Version.  
104  
 
Q&A  
Please check to see if any problems you have encountered with the phone are described in this  
section before taking the phone in for a service or calling a service engineer.  
Q
A
How do I view the list of outgoing calls,  
incoming calls and missed calls?  
Q
A
Why won't the LCD turn on?  
Remove the battery, then replace it. Then  
turn on the power. If there is no change,  
fully charge the battery and try again.  
Press the  
key.  
Q
A
Why is the connection inconsistent or not  
audible in certain areas?  
When the frequency environment is  
unstable in a certain area, connection may  
be inconsistent and inaudible. Relocate to  
another area and try again.  
Q
A
Why does the phone heat up?  
The phone may get hot when there is a  
very long call duration, when games are  
played or even when surfing the Internet  
for a long time. This has no effect upon the  
life of the product or performance.  
Q
A
Why is the connection inconsistent  
or abruptly disconnects even when  
established?  
When frequency is unstable or weak,  
or if there are too many users, a  
connection may be cut off even after it  
was established. Please try again later  
or attempt again after relocating to other  
areas.  
Q
A
Why does the battery run out so quickly  
during normal use?  
This may be due to the user environment, a  
large number of calls or a weak signal.  
Q
A
Why is no number dialed when an Address  
Book entry is recalled?  
Check that the number has been stored  
correctly by using the Address Book Search  
feature. Re-store them, if necessary.  
105  
 
Accessories  
There are a variety of accessories available for your mobile phone, some of which may be  
sold separately. You can select these options according to your personal communication  
requirements. Consult your local dealer for availability.  
Travel Adapter  
This adapter allows you to charge the battery. It supports  
standard US 120 Volt 60Hz outlets.  
Battery  
Standard battery is available.  
CD-ROM  
nNote  
• Always use genuine LG accessories. Failure to do this may invalidate your warranty.  
• Accessories may be different in different regions; please check with our regional service company  
or agent for further enquiries.  
106  
 
For Your Safety  
Be careful when using your phone near  
other electronic devices. RF emissions  
from your mobile phone may affect nearby  
in adequately shielded electronic equipment.  
You should consult with manufacturers of any  
personal medical devices such as pacemakers  
and hearing aides to determine if they are  
susceptible to interference from your mobile  
phone. Turn off your phone in a medical  
facility or at a gas station. Never place your  
phone in a microwave oven as this will cause  
the battery to explode.  
Important Information  
This user guide contains important information  
on the use and operation of this phone. Please  
read all the information carefully for optimal  
performance and to prevent any damage  
to or misuse of the phone. Any changes or  
modifications not expressly approved in this  
user guide could void your warranty for this  
equipment. Any changes or modifications  
not expressly approved by the manufacturer  
could void the user’s authority to operate the  
equipment.  
IMPORTANT! Please read the TIA SAFETY  
INFORMATION on page 111 before using  
your phone.  
Before You Start  
Safety Instructions  
WARNING! To reduce the possibility of  
electric shock, do not expose your phone to  
high humidity areas, such as the bathroom,  
swimming pool, etc.  
Safety Information  
Read these simple guidelines. Breaking the  
rules may be dangerous or illegal. Further  
detailed information is given in this user  
guide.  
Always store your phone away from  
heat. Never store your phone in settings that  
may expose it to temperatures less than 32°F  
or greater than 104°F, such as outside during  
extreme weather conditions or in your car on  
a hot day. Exposure to excessive cold or heat  
will result in malfunction, damage and/or  
catastrophic failure.  
]Do not disassemble this unit. Take it to a  
qualified service technician when repair  
work is required.  
]Keep away from electrical appliances such  
as TVs, radios, and personal computers.  
107  
 
For Your Safety  
]The unit should be kept away from heat  
sources such as radiators or cookers.  
Memory card information and  
care  
]The memory card cannot be used for  
]Do not drop.  
recording copyright- protected data.  
]Do not subject this unit to mechanical  
vibration or shock.  
]Keep the memory card out of the small  
children's reach.  
]The coating of the phone may be damaged  
if covered with wrap or vinyl wrapper.  
]Do not leave the memory card in extremely  
hot location.  
]Use dry cloth to clean the exterior of the  
unit. (Do not use solvent such as benzene,  
thinner or alcohol.)  
]Do not disassemble or modify the memory  
card.  
]Do not subject this unit to excessive smoke  
or dust.  
FCC RF Exposure Information  
WARNING! Read this information before  
operating the phone.  
]Do not keep the phone next to credit  
cards or transport tickets; it can affect the  
information on the magnetic strips.  
In August 1996, the Federal Communications  
Commission (FCC) of the United States, with  
its action in Report and Order FCC 96-326,  
adopted an updated safety standard for  
human exposure to radio frequency (RF)  
electromagnetic energy emitted by FCC  
regulated transmitters. Those guidelines are  
consistent with the safety standard previously  
set by both U.S. and international standards  
bodies.  
]Do not tap the screen with a sharp object;  
otherwise, it may damage the phone.  
]Do not expose the phone to liquid or  
moisture.  
]Use the accessories like an earphone  
cautiously. Do not touch the antenna  
unnecessarily.  
108  
For Your Safety  
The design of this phone complies with  
the FCC guidelines and these international  
standards.  
between the user's body and the back of the  
phone, and have not been tested for typical  
body-worn operations may not comply with  
FCC RF exposure limits and should be avoided.  
CAUTION  
Use only the supplied and approved antenna.  
FCC Part 15 Class B Compliance  
Use of unauthorized antennas or modifications This device and its accessories comply with  
could impair call quality, damage the phone,  
void your warranty and/or result in violation  
of FCC regulations. Do not use the phone with  
a damaged antenna. If a damaged antenna  
comes into contact with skin, a minor burn  
may result. Contact your local dealer for a  
replacement antenna.  
part 15 of FCC rules. Operation is subject  
to the following two conditions: (1) This  
device and its accessories may not cause  
harmful interference, and (2) this device and  
its accessories must accept any interference  
received, including interference that may  
cause undesired operation.  
Body-worn Operation  
Part 15.105 statement  
This equipment has been tested and found  
to comply with the limits for a class B  
digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide  
reasonable protection against harmful  
interference in a residential installation.  
This equipment generates uses and can  
radiate radio frequency energy and, if not  
installed and used in accordance with the  
instructions, may cause harmful interference  
to radio communications. However, there is no  
guarantee that interference will not occur in a  
particular installation.  
This device was tested for typical body-worn  
operations with the back of the phone kept  
0.79 inches (2cm) between the user’s body  
and the back of the phone. To comply with  
FCC RF exposure requirements, a minimum  
separation distance of 0.79 inches (2cm) must  
be maintained between the user’s body and  
the back of the phone. Third-party belt-clips,  
holsters, and similar accessories containing  
metallic components should not be used.  
Body-worn accessories that cannot maintain  
0.79 inches (2cm) separation distance  
109  
For Your Safety  
If this equipment does cause harmful  
interference or television reception, which  
can be determined by turning the equipment  
off and on, the user is encouraged to try to  
correct the interference by one or more of the  
following measures:  
]Do not dispose in fire or with hazardous or  
flammable materials.  
Adapter (Charger) Cautions  
]Using the wrong battery charger could  
damage your phone and void your warranty.  
]Reorient or relocate the receiving antenna.  
]The adapter or battery charger is intended  
for indoor use only.  
]Increase the separation between the  
equipment and receiver.  
Do not expose the adapter or battery charger  
to direct sunlight or use it in places with high  
humidity, such as the bathroom.  
]Connect the equipment into an outlet on  
a circuit different from that to which the  
receiver is connected.  
Avoid damage to your hearing  
]Consult the dealer or an experienced radio/  
TV technician for help.  
]Damage to your hearing can occur if you are  
exposed to loud sound for long periods of  
time. We therefore recommend that you do  
not turn on or off the handset close to your  
ear. We also recommend that music and  
call volumes are set to a reasonable level.  
Cautions for Battery  
]Do not disassemble.  
]Do not short-circuit.  
]Do not expose to high temperature:  
60°C (140°F).  
]If you are listening to music while out and  
about, please ensure that the volume is at  
a reasonable level so that you are aware  
of your surroundings. This is particularly  
imperative when attempting to cross the  
street.  
]Do not incinerate.  
Battery Disposal  
]Please dispose of your battery properly  
or bring to your local wireless carrier for  
recycling.  
110  
 
Safety Guidelines  
Those standards were based on  
TIA Safety Information  
comprehensive and periodic evaluations of the  
relevant scientific literature. For example, over  
120 scientists, engineers, and physicians from  
universities, government health agencies,  
and industry reviewed the available body  
of research to develop the ANSI Standard  
(C95.1).  
Provided herein is the complete TIA Safety  
Information for Wireless Handheld phones.  
Inclusion of the text covering Pacemakers,  
Hearing Aids, and Other Medical Devices  
is required in the owner’s manual for CTIA  
Certification. Use of the remaining TIA  
language is encouraged when appropriate.  
* American National Standards Institute;  
National Council on Radiation Protection  
and Measurements; International  
Commission on Non-Ionizing Radiation  
Protection  
Exposure to Radio Frequency  
Signal  
Your wireless handheld portable telephone  
is a lowpower radio transmitter and receiver.  
When it is ON, it receives and also sends out  
radio frequency (RF) signals.  
The design of your phone complies with the  
FCC guidelines (and those standards).  
In August, 1996, the Federal Communications  
Commissions (FCC) adopted RF exposure  
guidelines with safety levels for handheld  
wireless phones. Those guidelines are  
consistent with the safety standards  
previously set by both U.S. and international  
standards bodies:  
Antenna Care  
Use only the supplied or an approved  
replacement antenna. Unauthorized antennas,  
modifications, or attachments could damage  
the phone and may violate FCC regulations.  
Phone Operation  
NORMAL POSITION: Hold the phone as you  
would any other telephone with the antenna  
pointed up and over your shoulder.  
ANSI C95.1 (1992) *  
NCRP Report 86 (1986)  
ICNIRP (1996)  
111  
 
Safety Guidelines  
Tips on Efficient Operation  
Pacemakers  
For your phone to operate most efficiently:  
The Health Industry Manufacturers  
Association recommends that a minimum  
separation of six (6’) inches be maintained  
between a handheld wireless phone and a  
pacemaker to avoid potential interference  
with the pacemaker. These recommendations  
are consistent with the independent research  
by and recommendations of Wireless  
Technology Research.  
]Do not touch the antenna unnecessarily  
when the phone is in use. Contact with the  
antenna affects call quality and may cause  
the phone to operate at a higher power  
level than otherwise needed.  
Driving  
Check the laws and regulations on the use of  
wireless phones in the areas where you drive.  
Always obey them. Also, if using your phone  
while driving, please:  
Persons with pacemakers:  
]Should ALWAYS keep the phone more than  
six inches from their pacemaker when the  
phone is turned ON.  
]Give full attention to driving - driving safely  
is your first responsibility;  
]Should not carry the phone in a breast  
pocket.  
]Use hands-free operation, if available;  
]Should use the ear opposite the pacemaker  
to minimize the potential for interference.  
]Pull off the road and park before making  
or answering a call if driving conditions  
so require.  
]If you have any reason to suspect that  
interference is taking place, turn your phone  
OFF immediately.  
Electronic Devices  
Most modern electronic equipment is shielded  
from RF signals. However, certain electronic  
equipment may not be shielded against the RF  
signals from your wireless phone.  
Hearing Aids  
Some digital wireless phones may interfere  
with some hearing aids. In the event of such  
interference, you may want to consult AT&T.  
112  
Safety Guidelines  
Other Medical Devices  
Aircraft  
If you use any other personal medical device,  
consult the manufacturer of your device to  
determine if they are adequately shielded  
from external RF energy. Your physician  
may be able to assist you in obtaining this  
information.  
FCC regulations prohibit using your phone  
while in the air. Turn your phone OFF before  
boarding an aircraft.  
Blasting Areas  
To avoid interfering with blasting operations,  
turn your phone OFF when in a ‘blasting areas  
or in areas posted: ‘Turn off two-way radio’.  
Obey all signs and instructions.  
Health Care Facilities  
Turn your phone OFF in health care facilities  
when any regulations posted in these areas  
instruct you to do so. Hospitals or health care  
facilities may use equipment that could be  
sensitive to external RF energy.  
Potentially Explosive  
Atmosphere  
Turn your phone OFF when in any area with a  
potentially explosive atmosphere and obey all  
signs and instructions. Sparks in such areas  
could cause an explosion or fire resulting in  
bodily injury or even death.  
Vehicles  
RF signals may affect improperly installed or  
inadequately shielded electronic systems in  
motor vehicles. Check with the manufacturer  
or its representative regarding your vehicle.  
Areas with a potentially explosive atmosphere  
are often, but not always, marked clearly.  
Potential areas may include: fueling areas  
(such as gasoline stations); below deck on  
boats; fuel or chemical transfer or storage  
facilities; vehicles using liquefied petroleum  
gas (such as propane or butane); areas where  
the air contains chemicals or particles (such  
as grain, dust, or metal powders); and any  
You should also consult the manufacturer of  
any equipment that has been added to your  
vehicle.  
Posted Facilities  
Turn your phone OFF in any facility where  
posted notices so require.  
113  
Safety Guidelines  
other area where you would normally be  
advised to turn off your vehicle engine.  
]Only use the battery for the system for  
which it is specified.  
]Only use the battery with a charging system  
that has been qualified with the system per  
IEEE-Std-1725-2006. Use of an unqualified  
battery or charger may present a risk of fire,  
explosion, leakage, or other hazard.  
For Vehicles Equipped with an  
Air Bag  
An air bag inflates with great force. DO NOT  
place objects, including either installed or  
portable wireless equipment, in the area over  
the air bag or in the air bag deployment area.  
If in-vehicle wireless equipment is improperly  
installed and the air bag inflates, serious  
injury could result.  
]Do not short circuit a battery or allow  
metallic conductive objects to contact  
battery terminals.  
]Replace the battery only with another  
battery that has been qualified with the  
system per IEEE-Std-1725-2006. Use of an  
unqualified battery may present a risk of  
fire, explosion, leakage or other hazard.  
Safety Information  
Please read and observe the following  
information for safe and proper use of your  
phone and to prevent damage. Also, keep the  
user guide in an accessible place at all the  
times after reading it.  
]Promptly dispose of used batteries in  
accordance with local regulations.  
]Battery usage by children should be  
supervised.  
]Do not disassemble or open crush, bend or  
deform, puncture or shred.  
]Avoid dropping the phone or battery. If the  
phone or battery is dropped, especially  
on a hard surface, and the user suspects  
damage, take it to a service center for  
inspection.  
]Do not modify or remanufacture, attempt  
to insert foreign objects into the battery,  
immerse or expose to water or other liquids,  
expose to fire, explosion or other hazard.  
]Improper battery use may result in a fire,  
explosion or other hazard.  
114  
Safety Guidelines  
]The phone shall only be connected to USB  
products that bear the USB-IF logo or have  
completed the USB-IF compliance program.  
]Battery life will vary due to usage patterns  
and environmental conditions.  
]Use of extended backlighting, Mobile Web  
Browsing, and data connectivity kits affect  
battery life and talk/standby times.  
Charger and Adapter Safety  
]The charger and adapter are intended for  
indoor use only.  
]The self-protection function of the battery  
cuts the power of the phone when its  
operation is in an abnormal state. In this  
case, remove the battery from the phone,  
reinstall it, and turn the phone on.  
Battery Information and Care  
]Please dispose of your battery properly  
or take it to your local wireless carrier for  
recycling.  
]Actual battery life will depend on network  
configuration, product settings, usage  
patterns, battery and environmental  
conditions.  
]The battery does not need to be fully  
discharged before recharging.  
]Use only LG-approved chargers specific to  
your phone model since they are designed  
to maximize battery life.  
Explosion, Shock, and Fire  
Hazards  
]Do not disassemble or impact the battery  
as it may cause electric shock, short-circuit,  
and fire. Store the battery in a place out of  
reach of children.  
]Do not put your phone in a place subject  
to excessive dust and keep the minimum  
required distance between the power cord  
and heat sources.  
]Keep the battery’s metal contacts clean.  
]Unplug the power cord prior to cleaning  
your phone, and clean the power plug pin  
when it is dirty.  
]Replace the battery when it no longer  
provides acceptable performance. The  
battery can be recharged several hundred  
times before replacement.  
]When using the power plug, ensure that it  
is firmly connected. If it is not, it may cause  
excessive heat or fire.  
]Recharge the battery after long periods of  
non-use to maximize battery life.  
115  
Safety Guidelines  
]If you put your phone in a pocket or bag  
without covering the receptacle of the  
phone (power plug pin), metallic articles  
(such as a coin, paperclip or pen) may  
short-circuit the phone. Always cover the  
receptacle when not in use.  
]When the phone is not used for a long  
period time, store it in a safe place with the  
power cord unplugged.  
]Using the phone in proximity to receiving  
equipment (i.e., TV or radio) may cause  
interference to the phone.  
]Do not short-circuit the battery. Metallic  
articles such as a coin, paperclip or pen in  
your pocket or bag may short-circuit the +  
and – terminals of the battery (metal strips  
on the battery) upon moving. Short-circuit  
of the terminal may damage the battery and  
cause an explosion.  
]Do not use the phone if the antenna is  
damaged. If a damaged antenna contacts  
skin, it may cause a slight burn. Please  
contact an LG Authorized Service Centre to  
replace the damaged antenna.  
]Do not immerse your phone in water. If this  
happens, turn it off immediately and remove  
the battery. If the phone does not work,  
take it to an LG Authorized Service Centre.  
General Notice  
]Using a damaged battery or placing a  
battery in your mouth may cause serious  
injury.  
]Do not paint your phone.  
]The data saved in your phone might be  
deleted due to careless use, repair of  
the phone, or upgrade of the software.  
Please backup your important phone  
numbers. (Ring tones, text messages, voice  
messages, pictures, and videos could also  
be deleted.) The manufacturer is not liable  
for damage due to the loss of data.  
]Do not place items containing magnetic  
components such as a credit card, phone  
card, bank book or subway ticket near your  
phone. The magnetism of the phone may  
damage the data stored in the magnetic  
strip.  
]Talking on your phone for a long period of  
time may reduce call quality due to heat  
generated during use.  
116  
Safety Guidelines  
]When you use the phone in public places,  
set the ring tone to vibration so as not to  
disturb others.  
exposures have not found any biological  
effects. Some studies have suggested  
that some biological effects may occur,  
but such findings have not been confirmed  
by additional research. In some cases,  
other researchers have had difficulty in  
reproducing those studies, or in determining  
the reasons for inconsistent results.  
]Do not turn your phone on or off when  
putting it in your ear.  
FDA Consumer Update  
The U.S. Food and Drug Administration Centre  
for Devices and Radiological Health Consumer  
Update on Mobile Phones.  
2. What is the FDA’s role concerning the  
safety of wireless phones?  
Under the law, the FDA does not review  
the safety of radiation-emitting consumer  
products such as wireless phones before  
they can be sold, as it does with new drugs  
or medical devices. However, the agency  
has authority to take action if wireless  
phones are shown to emit radiofrequency  
energy (RF) at a level that is hazardous to  
the user. In such a case, the FDA could  
require the manufacturers of wireless  
phones to notify users of the health hazard  
and to repair, replace, or recall the phones  
so that the hazard no longer exists.  
1. Do wireless phones pose a health  
hazard?  
The available scientific evidence does  
not show that any health problems are  
associated with using wireless phones.  
There is no proof, however, that wireless  
phones are absolutely safe. Wireless  
phones emit low levels of radiofrequency  
energy (RF) in the microwave range while  
being used. They also emit very low levels  
of RF when in the standby mode. Whereas  
high levels of RF can produce health  
effects (by heating tissue), exposure to  
low level RF that does not produce heating  
effects causes no known adverse health  
effects. Many studies of low level RF  
Although the existing scientific data do not  
justify FDA regulatory actions, the FDA has  
urged the wireless phone industry to take a  
number of steps, including the following:  
117  
Safety Guidelines  
]Support needed research into possible  
biological effects of RF of the type  
emitted by wireless phones;  
]National Telecommunications and  
Information Administration  
The National Institutes of Health  
participates in some interagency working  
group activities, as well.  
]Design wireless phones in a way that  
minimizes any RF exposure to the user  
that is not necessary for device function;  
and  
The FDA shares regulatory responsibilities  
for wireless phones with the Federal  
Communications Commission (FCC). All  
phones that are sold in the United States  
must comply with FCC safety guidelines  
that limit RF exposure. The FCC relies on  
the FDA and other health agencies for  
safety questions about wireless phones.  
]Cooperate in providing users of  
wireless phones with the best possible  
information on possible effects of  
wireless phone use on human health.  
The FDA belongs to an interagency working  
group of the federal agencies that have  
responsibility for different aspects of RF  
safety to ensure coordinated efforts at  
the federal level. The following agencies  
belong to this working group:  
The FCC also regulates the base stations  
that the wireless phone networks rely  
upon. While these base stations operate  
at higher power than do the wireless  
phones themselves, the RF exposures that  
people get from these base stations are  
typically thousands of times lower than  
those they can get from wireless phones.  
Base stations are thus not the subject  
of the safety questions discussed in this  
document.  
]National Institute for Occupational Safety  
and Health  
]Environmental Protection Agency  
]Occupational Safety and Health  
Administration  
118  
Safety Guidelines  
3. What kinds of phones are the subject  
of this update?  
suffered from flaws in their research  
methods. Animal experiments investigating  
the effects of radiofrequency energy (RF)  
exposures characteristic of wireless phones  
have yielded conflicting results that often  
cannot be repeated in other laboratories.  
A few animal studies, however, have  
suggested that low levels of RF could  
accelerate the development of cancer in  
laboratory animals. However, many of  
the studies that showed increased tumor  
development used animals that had been  
genetically engineered or treated with  
cancer causing chemicals so as to be pre-  
disposed to develop cancer in the absence  
of RF exposure. Other studies exposed the  
animals to RF for up to 22 hours per day.  
These conditions are not similar to the  
conditions under which people use wireless  
phones, so we don’t know with certainty  
what the results of such studies mean for  
human health. Three large epidemiology  
studies have been published since  
The term ‘wireless phone’ refers here to  
handheld wireless phones with built-in  
antennas, often called ‘cell’, ‘mobile’, or  
‘PCS’ phones. These types of wireless  
phones can expose the user to measurable  
radiofrequency energy (RF) because of the  
short distance between the phone and  
the user’s head. These RF exposures are  
limited by FCC safety guidelines that were  
developed with the advice of the FDA and  
other federal health and safety agencies.  
When the phone is located at greater  
distances from the user, the exposure to RF  
is drastically lower because a person’s RF  
exposure decreases rapidly with increasing  
distance from the source. The so-called  
‘cordless phones,’ which have a base unit  
connected to the telephone wiring in a  
house, typically operate at far lower power  
levels, and thus produce RF exposures far  
below the FCC safety limits.  
December 2000. Between them, the studies  
investigated any possible association  
between the use of wireless phones and  
primary brain cancer, glioma, meningioma,  
or acoustic neuroma, tumors of the brain or  
4. What are the results of the research  
done already?  
The research done thus far has produced  
conflicting results, and many studies have  
119  
Safety Guidelines  
salivary gland, leukemia, or other cancers.  
None of the studies demonstrated the  
existence of any harmful health effects  
from wireless phone RF exposures.  
- if they do- may be many, many years. The  
interpretation of epidemiological studies  
is hampered by difficulties in measuring  
However, none of the studies can answer  
questions about long-term exposures, since  
the average period of phone use in these  
studies was around three years.  
5. What research is needed to decide  
whether RF exposure from wireless  
phones poses a health risk?  
A combination of laboratory studies and  
epidemiological studies of people actually  
using wireless phones would provide some  
of the data that are needed. Lifetime animal  
exposure studies could be completed in a  
few years. However, very large numbers  
of animals would be needed to provide  
reliable proof of a cancer promoting effect  
if one exists. Epidemiological studies can  
provide data that is directly applicable  
to human populations, but 10 or more  
years follow-up may be needed to provide  
answers about some health effects, such  
as cancer. This is because the interval  
between the time of exposure to a cancer-  
causing agent and the time tumors develop  
120  
Safety Guidelines  
information documents on EMF issues. The  
FDA and the Cellular Telecommunications  
& Internet Association (CTIA) have a formal  
Cooperative Research and Development  
Agreement (CRADA) to do research on  
wireless phone safety. The FDA provides  
the scientific oversight, obtaining input  
from experts in government, industry,  
and academic organizations. CTIA-funded  
research is conducted through contracts  
with independent investigators. The initial  
research will include both laboratory  
studies and studies of wireless phone  
users. The CRADA will also include a  
broad assessment of additional research  
needs in the context of the latest research  
developments around the world.  
7.  
121  
Safety Guidelines  
phones and other wireless handsets with  
the participation and leadership of FDA  
scientists and engineers. The standard,  
‘Recommended Practice for Determining  
the Spatial- Peak Specific Absorption Rate  
(SAR) in the Human Body Due to Wireless  
Communications Devices: Experimental  
Techniques,’ sets forth the first consistent  
test methodology for measuring the rate  
at which RF is deposited in the heads of  
wireless phone users. The test method  
uses a tissuesimulating model of the  
human head. Standardized SAR test  
methodology is expected to greatly improve  
the consistency of measurements made at  
different laboratories on the same phone.  
SAR is the measurement of the amount of  
energy absorbed in tissue, either by the  
whole body or a small part of the body. It  
is measured in watts/kg (or milliwatts/g)  
of matter. This measurement is used to  
determine whether a wireless phone  
complies with safety guidelines.  
9. What steps can I take to reduce my  
exposure to radiofrequency energy  
from my wireless phone?  
If there is a risk from these products - and  
at this point we do not know that there is  
- it is probably very small. But if you are  
concerned about avoiding even potential  
risks, you can take a few simple steps to  
minimize your exposure to radiofrequency  
energy (RF). Since time is a key factor in  
how much exposure a person receives,  
reducing the amount of time spent using a  
wireless phone will reduce RF exposure. If  
you must conduct extended conversations  
by wireless phone every day, you could  
place more distance between your body  
and the source of the RF, since the exposure  
level drops off dramatically with distance.  
For example, you could use a headset and  
carry the wireless phone away from your  
body or use a wireless phone connected to  
a remote antenna. Again, the scientific data  
do not demonstrate that wireless phones  
are harmful. But if you are concerned about  
the RF exposure from these products, you  
can use measures like those described  
above to reduce your RF exposure from  
wireless phone use.  
122  
Safety Guidelines  
10. What about children using wireless  
phones?  
11. What about wireless phone  
interference with medical equipment?  
The scientific evidence does not show  
a danger to users of wireless phones,  
including children and teenagers. If you  
want to take steps to lower exposure to  
radiofrequency energy (RF), the measures  
described above would apply to children  
and teenagers using wireless phones.  
Reducing the time of wireless phone use  
and increasing the distance between  
the user and the RF source will reduce  
RF exposure. Some groups sponsored by  
other national governments have advised  
that children be discouraged from using  
wireless phones at all. For example,  
the government in the United Kingdom  
distributed leaflets containing such a  
recommendation in December 2000. They  
noted that no evidence exists that using  
a wireless phone causes brain tumors or  
other ill effects. Their recommendation to  
limit wireless phone use by children was  
strictly precautionary; it was not based on  
scientific evidence that any health hazard  
exists.  
Radio frequency energy (RF) from wireless  
phones can interact with some electronic  
devices. For this reason, the FDA helped  
develop a detailed test method to measure  
electromagnetic interference (EMI) of  
implanted cardiac pacemakers and  
defibrillators from wireless telephones.  
This test method is now part of a standard  
sponsored by the Association for the  
Advancement of Medical Instrumentation  
(AAMI). The final draft, a joint effort by  
the FDA, medical device manufacturers,  
and many other groups, was completed  
in late 2000. This standard will allow  
manufacturers to ensure that cardiac  
pacemakers and defibrillators are safe  
from wireless phone EMI. The FDA has  
tested hearing aids for interference  
from handheld wireless phones and  
helped develop a voluntary standard  
sponsored by the Institute of Electrical and  
Electronic Engineers (IEEE). This standard  
specifies test methods and performance  
requirements for hearing aids and wireless  
phones so that no interference occurs when  
a person uses a ‘compatible’ phone and a  
123  
Safety Guidelines  
‘compatible’ hearing aid at the same time.  
This standard was approved by the IEEE in  
2000. The FDA continues to monitor the use  
of wireless phones for possible interactions  
with other medical devices. Should harmful  
interference be found to occur, the FDA will  
conduct testing to assess the interference  
and work to resolve the problem.  
World Health Organization (WHO)  
International EMF Project  
(http://www.icnirp.de)  
National Radiological Protection Board (UK)  
(http://www.hpa.org.uk/radiation)  
10 Driver Safety Tips  
Your wireless phone gives you the  
powerful ability to communicate by voice  
almost anywhere, anytime. An important  
responsibility accompanies the benefits of  
wireless phones, one that every user must  
uphold.  
12. Where can I find additional  
information?  
For additional information, please refer to the  
following resources:  
FDA web page on wireless phones  
(http://www.fda.gov/  
Radiation-EmittingProducts/  
RadiationEmittingProductsandProcedures/  
HomeBusinessandEntertainment/CellPhones/  
default.htm)  
When operating a car, driving is your first  
responsibility.  
When using your wireless phone behind the  
wheel of a car, practice good common sense  
and remember the following tips:  
1. Get to know your wireless phone and its  
features such as speed dial and redial.  
Carefully read your instruction manual  
and learn to take advantage of valuable  
features most phones offer, including  
automatic redial and memory. Also, work to  
memorize the phone keypad so you can use  
the speed dial function without taking your  
attention off the road.  
Federal Communications Commission (FCC) RF  
Safety Program  
(http://www.fcc.gov/oet/rfsafety)  
International Commission on Non-lonizing  
Radiation Protection  
(http://www.icnirp.de)  
124  
Safety Guidelines  
2. When available, use a hands-free device.  
A number of hands-free wireless phone  
accessories are readily available today.  
Whether you choose an installed mounted  
device for your wireless phone or a speaker  
phone accessory, take advantage of these  
devices if available to you.  
5. Do not take notes or look up phone  
numbers while driving. If you are reading  
an Address Book or business card, or  
writing a “to-do” list while driving a car,  
you are not watching where you are going.  
It is common sense. Don’t get caught in  
a dangerous situation because you are  
reading or writing and not paying attention  
to the road or nearby vehicles.  
3. Position your wireless phone within easy  
reach. Make sure you place your wireless  
phone within easy reach and where you  
can reach it without removing your eyes  
from the road. If you get an incoming call at  
an inconvenient time, if possible, let your  
voicemail answer it for you.  
6. Dial sensibly and assess the traffic; if  
possible, place calls when you are not  
moving or before pulling into traffic. Try to  
plan your calls before you begin your trip  
or attempt to coincide your calls with times  
you may be stopped at a stop sign, red light  
or otherwise stationary. But if you need  
to dial while driving, follow this simple  
tip— dial only a few numbers, check the  
road and your mirrors, then continue.  
4. Suspend conversations during hazardous  
driving conditions or situations. Let the  
person you are speaking with know you  
are driving; if necessary, suspend the call  
in heavy traffic or hazardous weather  
conditions. Rain, sleet, snow and ice can  
be hazardous, but so is heavy traffic. As  
a driver, your first responsibility is to pay  
attention to the road.  
125  
Safety Guidelines  
7. Do not engage in stressful or emotional  
conversations that may be distracting.  
Stressful or emotional conversations and  
driving do not mix; they are distracting  
and even dangerous when you are behind  
the wheel of a car. Make people you are  
talking with aware you are driving and if  
necessary, suspend conversations which  
have the potential to divert your attention  
from the road.  
9. Use your wireless phone to help others in  
emergencies. Your wireless phone provides  
you a perfect opportunity to be a “Good  
Samaritan” in your community. If you see  
an auto accident, crime in progress or  
other serious emergency where lives are in  
danger, call 911 or other local emergency  
number, as you would want others to do  
for you.  
10. Call roadside assistance or a special  
wireless non-emergency assistance  
number when necessary. Certain  
situations you encounter while driving  
may require attention, but are not urgent  
enough to merit a call for emergency  
services. But you can still use your  
wireless phone to lend a hand. If you see  
a broken-down vehicle posing no serious  
hazard, a broken traffic signal, a minor  
traffic accident where no one appears  
injured or a vehicle. you know to be  
stolen, call roadside assistance or other  
special non-emergency wireless number.  
8. Use your wireless phone to call for help.  
Your wireless phone is one of the greatest  
tools you can own to protect yourself and  
your family in dangerous situations — with  
your phone at your side, help is only three  
numbers away. Dial 911 or other local  
emergency number in the case of fire,  
traffic accident, road hazard or medical  
emergency. Remember, it is a free call on  
your wireless phone!  
For more information, please call to  
888-901-SAFE, or visit our website  
http://www.ctia.org.  
126  
Safety Guidelines  
certified power level in all tested frequency  
bands. Although SAR is determined at the  
highest certified power level, the actual SAR  
level of the phone while operating can be  
well below the maximum value. Because  
the phone is designed to operate at multiple  
power levels to use only the power required  
to reach the network, in general, the closer  
you are to a wireless base station antenna,  
the lower the power output.  
Consumer Information on  
SAR (Specific Absorption  
Rate)  
This Model Phone Meets the Government’s  
Requirements for Exposure to Radio Waves.  
Your wireless phone is a radio transmitter  
and receiver. It is designed and manufactured  
not to exceed the emission limits for  
exposure to radio frequency (RF) energy set  
by the Federal Communications Commission  
(FCC) of the U.S. Government. These limits  
are part of comprehensive guidelines and  
establish permitted levels of RF energy for  
the general population. The guidelines are  
based on standards that were developed by  
independent scientific organizations through  
periodic and thorough evaluation of scientific  
studies. The standards include a substantial  
safety margin designed to assure the safety of  
all persons, regardless of age and health.  
Before a phone model is available for sale  
to the public, it must be tested and certified  
to the FCC that it does not exceed the limit  
established by the government-adopted  
requirement for safe exposure. The tests are  
performed in positions and locations (e.g., at  
the ear and worn on the body) as required  
by the FCC for each model. The highest SAR  
value for  
phone when  
tested for use at the ear is 1.22 W/kg and  
when worn on the body, as described in this  
user’s manual, is 0.45 W/kg. (Body-worn  
measurements differ among phones models,  
depending upon available accessories and  
FCC requirements.) While there may be  
differences between SAR levels of various  
phones and at various positions, they all meet  
the government requirement for safe exposure.  
The exposure standard for wireless mobile  
phones employs a unit of measurement  
known as the Specific Absorption Rate,  
or SAR. The SAR limit set by the FCC is  
1.6 W/kg.* Tests for SAR are conducted using  
standard operating positions specified by the  
FCC with the phone transmitting at its highest  
127  
Safety Guidelines  
The FCC has granted an Equipment  
Authorization for this model phone with  
all reported SAR levels evaluated as in  
compliance with the FCC RF emission  
guidelines. SAR information on this model  
phone is on file with the FCC and can be  
found under the Display Grant section of  
http://www.fcc.gov/oet/ea/fccid after  
searching on FCC ID BEJGT550.  
Additional information on Specific Absorption  
Rates (SAR) can be found on the Cellular  
Telecommunications Industry Association  
(CTIA) website at http://www.ctia.org.  
* In the United States and Canada, the SAR  
limit for mobile phones used by the public  
is 1.6 watts/kg (W/kg) averaged over one  
gram of tissue. The standard incorporates  
a substantial margin of safety to give  
additional protection for the public and to  
account for any variations in measurements.  
128  
Glossary  
To help you understand the main technical terms and abbreviations used in this booklet and to  
take full advantage of the features on your mobile phone, here are a few definitions.  
Call Forwarding  
The ability to reroute calls to another number.  
GSM (Global System for Mobile  
Communication)  
International standard for cellular  
Call Reject  
The ability to reject incoming calls or calls  
from specific phone numbers.  
communication, guaranteeing compatibility  
between the various network operators. GSM  
covers most European countries and many  
other parts of the world.  
Call Waiting  
The ability to inform users that they have an  
incoming call when engaged on another call.  
Java  
Programming language generating  
applications that can run on all hardware  
platforms, whether small, medium or large,  
without modification.  
Conference Calls  
Ability to establish a conference call involving  
up to five additional parties.  
It has been promoted for and geared heavily  
towards the Web, both for public Web sites  
and Intranets. When a Java program runs  
from a Web page, it is called a Java applet.  
When it is run on a mobile phone or pager, it  
is called a MIDlet.  
GPRS (General Packet Radio  
Service)  
GPRS guarantees continuous connection to  
the Internet for mobile phone and computer  
users. It is based on the Global System  
for Mobile Communication (GSM) circuit-  
switched cellular phone connections and the  
Short Message Service (SMS).  
129  
 
Glossary  
Line Identification Services  
(Caller ID)  
Service allowing subscribers to view or block  
the telephone numbers of callers.  
SIM Card  
Card containing a chip with all the information  
required to operate the phone (network  
and memory information, as well as the  
subscriber's personal data). The SIM card fits  
into a small slot on the back of the phone and  
is protected by the battery.  
Phone Password  
Security code used to unlock the phone  
when you have selected the option to lock it  
automatically each time it switches on.  
SMS (Short Message Service)  
Network service sending and receiving  
text messages to and from another  
Roaming  
subscriber, without the need to speak to  
the correspondent. The message created or  
received (up to 160 characters long) can be  
displayed, received, edited or sent.  
Use of your phone when you are outside your  
home area (for example, when traveling).  
SDN (Service Dial Numbers)  
Telephone numbers supplied by your network  
provider and giving access to special services  
such as voice mail, directory inquiries,  
customer support and emergency services.  
Patent Information  
This product was manufactured under one or  
more of the following US  
patents: 5276765, 5749067, 6061647  
130  
Index  
M
T
N
U
O
V
P
W
R
S
132  

Motorola V8162 User Manual
Motorola MOTORAZRTM User Manual
Motorola Cell Phone WX345 User Manual
Intel CELERON 200 User Manual
Craftsman LAP30ULV CT User Manual
Compaq CD Player NX7000 User Manual
Canon CHIP RESETTERS PGI 5 User Manual
American Audio SCD 100 User Manual
Alpine CDA 9853 User Manual
Addonics Technologies ZESSIU3CS User Manual