Kyocera KX5 User Manual

The exposure standard for wireless mobile phones  
employs a unit of measurement known as the Specific  
Absorption Rate, or SAR. The SAR limit set by the  
FCC is 1.6 W/kg.* Tests for SAR are conducted using  
standard operating positions specified by the FCC  
with the phone transmitting at its highest certified  
power level in all tested frequency bands.  
* In the United States and Canada, the SAR limit for  
mobile phones used by the public is 1.6 watts/kg (W/  
kg) averaged over one gram of tissue. The standard  
incorporates a substantial margin of safety to give  
additional protection for the public and to account for  
any variations in measurements.  
Caution  
Although the SAR is determined at the highest  
certified power level, the actual SAR level of the  
phone while operating can be well below the  
maximum value.  
The user is cautioned that changes or modifications  
not expressly approved by the party responsible for  
compliance could void the warranty and user’s  
authority to operate the equipment.  
This is because the phone is designed to operate at  
multiple power levels so as to use only the power  
required to reach the network. In general, the closer  
you are to a wireless base station antenna, the lower  
the power output.  
Optimize your phone’s performance  
Use the guidelines on page 2 to learn how to optimize  
the performance and life of your phone and battery.  
Air bags  
Before a phone model is available for sale to the  
public, it must be tested and certified to the FCC that it  
does not exceed the limit established by the  
government-adopted requirement for safe exposure.  
The tests are performed in positions and locations  
(e.g., at the ear and worn on the body) as required by  
the FCC for each model.  
If your vehicle has an air bag, DO NOT place installed  
or portable phone equipment or other objects over the  
air bag or in the air bag deployment area. If equipment  
is not properly installed, you and your passengers risk  
serious injury.  
Medical devices  
Body-worn measurements differ among phone  
models, depending upon availability of accessories  
and FCC requirements. While there may be  
differences between the SAR levels of various phones  
and at various positions, they all meet the government  
requirement for safe exposure.  
PacemakersWarning to pacemaker wearers:  
Wireless phones, when in the ‘on’ position, have been  
shown to interfere with pacemakers. The phone  
should be kept at least six (6) inches away from the  
pacemaker to reduce risk.  
The Health Industry Manufacturers Association and  
the wireless technology research community  
recommend that you follow these guidelines to  
minimize the potential for interference.  
The FCC has granted an Equipment Authorization for  
this model phone with all reported SAR levels  
evaluated as in compliance with the FCC RF emission  
guidelines. SAR information on this model phone is on  
file with the FCC and can be found under the Display  
Grant section  
Always keep the phone at least six inches  
(15 centimeters) away from your pacemaker when  
the phone is turned on.  
http://www.fcc.gov/oet/fccid after searching on the  
FCC ID: OVFKWC-KX5.  
Do not carry your phone near your heart.  
Use the ear opposite the pacemaker.  
Additional information on SAR can be found on the  
Cellular Telecommunications and Internet Association  
(CTIA) web-site at http://www.wow-com.com.  
If you have any reason to suspect that  
interference is taking place, turn off your phone  
immediately.  
User Guide for the Kyocera Slider Remix KX5 Phone  
iii  
Hearing aids—Some digital wireless phones may interfere  
with hearing aids. In the event of such interference, you  
may want to consult your service provider or call the  
customer service line to discuss alternatives.  
areas where the air contains chemicals or  
particles such as grain, dust, or metal powders  
any other area where you would normally be  
advised to turn off your vehicle engine  
Other medical devices—If you use any other personal  
medical device, consult the manufacturer of the  
device to determine if it is adequately shielded from  
external RF energy. Your physician may be able to  
help you obtain this information.  
Use with care  
Use only in normal position (to ear). Avoid dropping,  
hitting, bending, or sitting on the phone.  
Keep phone dry  
In health care facilities—Turn your phone off in health  
care facilities when instructed. Hospitals and health  
care facilities may be using equipment that is sensitive  
to external RF energy.  
If the phone gets wet, turn the power off immediately  
and contact your dealer. Water damage may not be  
covered under warranty.  
Resetting the phone  
Potentially unsafe areas  
If the screen seems frozen and the keypad does not  
respond to keypresses, reset the phone by completing  
the following steps:  
Posted facilities—Turn your phone off in any facility  
when posted notices require you to do so.  
Aircraft—FCC regulations prohibit using your phone on  
a plane that is in the air. Turn your phone off or switch  
it to Airplane Mode before boarding aircraft.  
1. Remove the battery door.  
2. Remove and replace the battery.  
If the problem persists, return the phone to the dealer  
for service.  
Vehicles—RF signals may affect improperly installed or  
inadequately shielded electronic systems in motor  
vehicles. Check with the manufacturer of the device to  
determine if it is adequately shielded from external RF  
energy.  
Accessories  
Use only Kyocera-approved accessories with Kyocera  
phones. Use of any unauthorized accessories may be  
dangerous and will invalidate the phone warranty if  
said accessories cause damage or a defect to the  
phone.  
Blasting areas—Turn off your phone where blasting is in  
progress. Observe restrictions, and follow any  
regulations or rules.  
Potentially explosive atmospheres—Turn off your phone  
when you are in any area with a potentially explosive  
atmosphere. Obey all signs and instructions. Sparks in  
such areas could cause an explosion or fire, resulting  
in bodily injury or death.  
Radio Frequency (RF) energy  
Your telephone is a radio transmitter and receiver.  
When it is on, it receives and sends out RF energy.  
Your service provider’s network controls the power of  
the RF signal. This power level can range from 0.006  
to 0.6 watts.  
Areas with a potentially explosive atmosphere are  
often, but not always, clearly marked. They include:  
In August 1996, the U.S. Federal Communications  
Commission (FCC) adopted RF exposure guidelines  
with safety levels for hand-held wireless phones.  
These guidelines are consistent with the safety  
standards previously set by both U.S. and  
fueling areas such as gas stations  
below deck on boats  
transfer or storage facilities for fuel or chemicals  
vehicles using liquefied petroleum gas, such as  
propane or butane  
international standards bodies in the following reports:  
iv  
ANSI C95.1 (American National Standards  
Institute, 1992)  
NCRP Report 86 (National Council on Radiation  
Protection and Measurements, 1986)  
ICNIRP (International Commission on  
Non-Ionizing Radiation Protection, 1996)  
Your phone complies with the standards set by these  
reports and the FCC guidelines.  
E911 mandates  
Where service is available, this handset complies with  
the Phase I and Phase II E911 Mandates issued by  
the FCC.  
Battery and charger specifications  
Charger  
Input  
Output  
CV90-60858-01  
CV90-60859-01  
Standard Battery:  
100-240 VAC / 50/60 Hz  
120 VAC / 60Hz  
4.5 V 1.5 A  
5.2 V 400 mA  
CV90-N1020-05: 3.7 V / 900 mAh  
Extended Battery:  
CV90-N1070-05: 3.7 V / 1550 mAh  
093 453 037  
Kyocera Wireless Corp.  
10300 Campus Point Drive, San Diego, CA 92121  
U.S.A.  
User Guide for the Kyocera Slider Remix KX5 Phone  
v
CONTENTS  
Viewing details about the playlist . . . . . . . . . . . 31  
Erasing a song . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 32  
1
Getting Started. . . . . . . . . . . . . . . . . . . . . . 1  
Installing the battery . . . . . . . . . . . . . . . . . . . . . . 1  
Getting to know your phone . . . . . . . . . . . . . . . . 3  
2
Making and Answering Calls . . . . . . . . . . 9  
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Silencing an incoming call . . . . . . . . . . . . . . . . 10  
Using the speakerphone . . . . . . . . . . . . . . . . . . 10  
Speed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Setting up voicemail . . . . . . . . . . . . . . . . . . . . . 13  
Understanding roaming. . . . . . . . . . . . . . . . . . . 14  
7
8
Using Media Gallery . . . . . . . . . . . . . . . . 33  
Accessing files . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Customizing Your Phone . . . . . . . . . . . . 36  
Silencing all sounds . . . . . . . . . . . . . . . . . . . . . 37  
Choosing ringers . . . . . . . . . . . . . . . . . . . . . . . 37  
Setting sounds for your phone . . . . . . . . . . . . . 38  
Using shortcuts. . . . . . . . . . . . . . . . . . . . . . . . . 39  
Personalizing the screen. . . . . . . . . . . . . . . . . . 40  
Creating a secure environment . . . . . . . . . . . . . 42  
Setting position location . . . . . . . . . . . . . . . . . . 45  
3
4
Entering Letters, Numbers,  
and Symbols . . . . . . . . . . . . . . . . . . . . . . 16  
Storing Contacts . . . . . . . . . . . . . . . . . . . 19  
Creating a new contact . . . . . . . . . . . . . . . . . . . 19  
Adding a code or extension. . . . . . . . . . . . . . . . 19  
Customizing your contacts. . . . . . . . . . . . . . . . . 19  
Editing a contact . . . . . . . . . . . . . . . . . . . . . . . . 20  
Erasing a contact. . . . . . . . . . . . . . . . . . . . . . . . 21  
Sending a vCard . . . . . . . . . . . . . . . . . . . . . . . . 21  
Customizing a phone number . . . . . . . . . . . . . . 21  
Finding contact information . . . . . . . . . . . . . . . 22  
9
Sending and Receiving  
Text Messages . . . . . . . . . . . . . . . . . . . . . 46  
Sending text messages . . . . . . . . . . . . . . . . . . . 46  
Retrieving text messages . . . . . . . . . . . . . . . . . . 49  
Customizing message settings . . . . . . . . . . . . . . 51  
10 Sending and Receiving  
Multimedia Messages . . . . . . . . . . . . . . . 53  
Sending multimedia messages . . . . . . . . . . . . . 53  
Receiving multimedia messages . . . . . . . . . . . . 54  
Viewing multimedia messages. . . . . . . . . . . . . . 55  
5
6
Using the Camera . . . . . . . . . . . . . . . . . . 23  
Taking a picture . . . . . . . . . . . . . . . . . . . . . . . . 25  
Camera key map . . . . . . . . . . . . . . . . . . . . . . . . 25  
Recording a video. . . . . . . . . . . . . . . . . . . . . . . 26  
11 Using Tools and Games . . . . . . . . . . . . . 56  
Voice Memo . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Using the Music Player . . . . . . . . . . . . . . 28  
Removable memory card . . . . . . . . . . . . . . . . . 28 Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
Formatting the memory card. . . . . . . . . . . . . . . 28  
Putting music files onto the  
Tip Calculator. . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Calculator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
memory card . . . . . . . . . . . . . . . . . . . . . . . . . . 2T9imer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Playing music . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Music Player controls . . . . . . . . . . . . . . . . . . . . 31  
Playback options. . . . . . . . . . . . . . . . . . . . . . . . 31  
Viewing details about a song file . . . . . . . . . . . . 31  
Stopwatch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Brick Attack . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
vi  
Contents  
12 Using Voice Recognition . . . . . . . . . . . . 61  
Setting up voice dialing . . . . . . . . . . . . . . . . . . .61  
Making a call using voice tags . . . . . . . . . . . . . .61  
Making a call using digit dialing. . . . . . . . . . . . .62  
Training voice recognition . . . . . . . . . . . . . . . . .64  
13 Connecting to the Internet . . . . . . . . . . . 65  
Using the Web Browser . . . . . . . . . . . . . . . . . . .65  
14 Getting Help . . . . . . . . . . . . . . . . . . . . . . . 67  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69  
User Guide for the Kyocera Slider Remix KX5 Phone  
vii  
1
GETTING STARTED  
Installing the battery  
Your Kyocera KX5 phone comes with a removable  
lithium ion (LI Ion) battery. Fully charge the  
battery before using the phone.  
Charging the battery  
You must have at least a partial charge in the  
battery to make or receive calls.  
To charge the battery:  
To install the battery:  
1. Connect the AC adapter to the jack on the  
1. Hold the phone face  
bottom of the phone.  
down.  
2. Plug the adapter into a  
2. Slide the tab at the  
bottom of the door up  
and remove the battery  
door.  
wall outlet.  
The battery icon in the  
upper-right corner of the  
screen tells you whether the  
phone is:  
3. Place the battery in the  
phone casing with the  
metal contacts facing  
the right side of the  
phone.  
Charging (the icon is  
animated)  
Partially charged  
Fully charged  
4. Replace the battery  
door by sliding the notches into the openings  
near the  
Note: The battery will not charge if you use the  
phone while it is connected to an AC adapter.  
top of the phone.  
Recharging the battery  
5. Lower the battery door  
and slide the tab at the  
bottom of the door up  
and then down to  
You can safely recharge the battery at any time,  
even if it has a partial charge.  
Note: To remove the battery, make sure the phone  
is powered off.  
secure the cover into  
place.  
User Guide for the Kyocera Slider Remix KX5 Phone  
1
Caring for the battery  
Accessing keypad shortcuts  
General safety guidelines  
Navigation key  
shortcuts  
Do not take apart, puncture, or short-circuit  
the battery.  
From the home screen, press the navigation key in  
one of four directions to access three shortcuts  
and one custom menu (see page 40 for  
If you have not used the battery for more than  
a month, recharge it before using your phone.  
Avoid exposing the battery to extreme  
temperatures, direct sunlight, or high  
humidity.  
instructions on setting up your custom menu).  
Never dispose of any battery in or near a  
fire. It could explode.  
Common causes of battery drain  
Music player shortcut  
Playing games or using the Web.  
Playing music files.  
Taking pictures and videos with the flash on.  
Keeping backlighting on.  
Operating in analog ( ) mode. Your phone  
switches between modes to find the best  
signal. To set your phone to operate in a single  
mode, select Menu Settings Network →  
Digital/Analog.  
From the home screen, press and hold  
Music Player screen appears.  
. The  
Operating in digital mode when far away from  
a base station or cell site.  
Using data cables or accessories.  
Operating when no service is available, or  
service is available intermittently.  
High earpiece and ringer volume settings.  
Repeating sound, vibration, or lighted alerts.  
2
Getting Started  
Getting to know your phone  
The phone is shown here in open position. You must slide your phone open to use the keys on the lower  
portion of the phone. When the phone is closed, the keys are locked to prevent accidental key presses.  
Home screen.  
1
2
3
Left softkey accesses menus and functions.  
Send/Talk key starts or answers a call. Press once to activate  
voice dialing, twice to display the Recent Calls list, and three  
times to redial the last number dialed.  
Speakerphone key activates the speakerphone and answers  
incoming calls.  
4
Keypad for entering numbers, letters, or symbols.  
5
6
7
* Shift key changes the text mode in text entry.  
Jack for AC adapter (included) and data cable (sold  
separately).  
Navigation key scrolls through lists and text entry fields and  
accesses shortcuts from the home screen.  
OK key selects a menu item or option. Press and hold to  
launch Music Player.  
8
9
Right softkey accesses the Contacts directory and other menu  
options.  
End/Power key turns the phone on and off, ends a call or  
browser session, and returns you to the home screen.  
Back key erases characters in text entry and returns you to  
the previous screen.  
10  
11  
12  
Internal camera key activates camera/video mode.  
13  
14  
Space # key enters a space during text entry. Press and hold  
to activate or deactivate Silent mode.  
0 Next key cycles through word choices during text entry.  
15  
User Guide for the Kyocera Slider Remix KX5 Phone  
3
Antenna does not extend.  
16  
17  
External camera key activates Camera mode. To activate  
Camera mode, press and hold until you hear one beep.  
Press and hold until you hear two beeps for Video mode.  
TransFlash slot for external memory card.  
Camera flash  
18  
19  
20  
21  
22  
Jack for hands-free headset (sold separately).  
Mirror when taking your own picture.  
Volume key to raise or lower speaker volume. Press and  
hold up or down to activate/deactivate Silent Mode.  
Camera lens  
23  
24  
25  
Speaker for ringers, speakerphone and music.  
Message Indicator Light  
4
Getting Started  
Using menus  
The contents of the main menu are as follows:  
Recent Calls  
All Calls  
Incoming Calls  
Outgoing Calls  
Missed Calls  
Erase Call Lists  
Recent Calls Timer Sent  
Messages  
New Text Msg  
New Pic Msg  
Voicemail  
InBox  
Browser Alerts*  
Camera  
Launches the Brick Attack  
camera.  
Tools & Games Web Browser  
Connects to Internet  
Race 21TM  
Voice Memo  
Scheduler  
Alarm Clock  
Tip Calculator  
Calculator  
Timer  
Phone Info  
Platform  
Settings  
Silent Mode  
Keyguard  
Sounds  
Display  
Convenience  
Memory Card  
Voice Features  
Messaging  
Security  
Your Number  
SW Version  
PRL Version  
Factory Config  
ESN  
All Calls Timer  
OutBox*  
Saved  
Drafts  
Msg Settings  
Group Lists*  
Erase Messages  
Contacts  
View All  
Add New  
Find Name  
Speed Dial List  
Voice Dial List  
Stopwatch  
Technology  
SID  
Browser Info  
Icon Key  
Network  
Music Player  
BREW Apps**  
Messaging Groups Displays your music library  
Accessories  
Business List  
Personal List  
Information  
(if music files are saved on an USB Storage  
inserted memory card)  
*Not available on all  
phones. Check with  
your service provider.  
** Menu name varies by  
service provider.  
Media Gallery  
Camera Pictures  
Images  
Sounds  
Videos  
Press  
to return to the home screen.  
Accessing menu items (slide open)  
In this guide, an arrow tells you to select an  
option from a menu.  
From the home screen, press  
Menu.  
to select  
For example, Menu Settings means select  
Menu, then select the Settings option.  
Press  
Press  
to select Contacts.  
left, right, up, or down to see  
menus and options.  
Note: To change the way the menus appear, see  
“Choosing a menu view” on page 40 for details.  
Press  
Press  
to select a menu item.  
to back up a menu level.  
User Guide for the Kyocera Slider Remix KX5 Phone  
5
Performing basic functions  
Slide closed  
Note: The phone must be powered ON to perform the following functions.  
To...  
From the home screen...  
Make a call  
Press and hold  
to initiate voice dialing. Contact must have voice  
tag assigned (see page 61).  
End a call  
Press  
Press  
Press  
Press  
Press  
.
Adjust volume during a call  
Acknowledge an alert  
Access menus  
up or down.  
when you see OK.  
once.  
Scroll menus  
up and down.  
Select menus  
Highlight a menu or option and press  
Press and hold down.  
once.  
Access Recent Calls List  
Activate Camera mode  
Take a picture  
Press and hold the side camera key  
Activate Camera mode and press  
.
.
Switch from Camera to  
Video mode.  
From Camera mode, press and hold the side camera key  
Activate Video mode and press  
.
Record a video  
Access Music Player  
Press and hold  
.
6
Getting Started  
Slide open  
To...  
From the home screen...  
Turn the phone on  
Press  
and wait until the phone beeps.  
Turn the phone off  
Make a call  
Press and hold  
until the phone beeps.  
Enter the number and press  
.
End a call  
Press  
Press  
.
Answer a call  
.
Access voicemail  
Verify your phone number  
Press and hold  
and follow the system prompts.  
Select Menu Phone Info.  
Silence the ringer on an  
incoming call  
Press  
Press  
or  
then  
to answer.  
Activate voice dialing  
Launch the browser  
Record a voice memo  
Access Recent Calls list  
Access Music Player  
Take a picture  
once and follow the prompts (see page 61).  
Press and hold  
Press and hold  
left.  
right.  
Press  
down.  
Press and hold  
Press camera key  
Press camera key  
.
. Focus on the image and select Capture.  
. Select Options Video Mode. Focus on  
Record a video  
the image and select Record. To stop recording, select Stop.  
User Guide for the Kyocera Slider Remix KX5 Phone  
7
The battery is fully charged. The more  
black bars, the greater the charge.  
Understanding screen icons  
These icons may appear on your phone’s screen.  
The alarm clock is set.  
The phone is operating in IS2000 (1X)  
digital mode.  
The phone is operating in IS95  
digital mode.  
The phone is operating in Analog  
(FM) mode.  
The phone is receiving a signal. You can  
make and receive calls. Fewer bars  
indicate a weaker signal.  
The phone is in privacy mode or is  
accessing a secure Web site.  
High-speed (3G) data service is  
available and active on your phone.  
Check with your service provider for  
availability.  
(blinking) The phone is sending high-  
speed data.  
(blinking) The phone is receiving high-  
speed data.  
A call is in progress.  
High-speed data service is available, but  
the phone is dormant.  
The phone is not receiving a signal. You  
cannot make or receive calls.  
The phone is roaming outside of its  
home service area.  
The phone is at the home screen. To  
access Menu, press  
The phone is at the home screen. To  
access Contacts, press  
.
You have a text message.  
(
indicates the message is urgent.)  
.
The phone is set to light up instead  
of ring.  
The phone is set to vibrate or to vibrate  
and then ring.  
Position location is set to your service  
provider and to emergency services.  
Position location is set to emergency  
services only.  
You have a voice message.  
You have a voice/text message.  
The phone is in camera mode.  
Camera flash mode is ready.  
Camera timer mode is ready.  
Camera zoom mode is ready.  
The phone is in video mode.  
8
Getting Started  
2
MAKING AND ANSWERING CALLS  
Ending calls using the slide  
Making a call  
Make sure you are in an area where a signal can  
You can set the phone to end calls immediately  
when you close the slide.  
be received. Look for the  
symbol on the home  
screen. The more bars you see in this symbol, the  
stronger the signal. If there are no bars, move to  
where the signal strength is better.  
Select Menu Settings Convenience →  
Close to End Enabled  
Select Disabled to have the phone call  
When the phone has been idle for a time, it  
changes to power save mode. When you see  
“Power Save” on your phone’s screen, press any  
key to return to normal operating mode.  
continue when you close the slide.  
Answering a call  
When a call comes in, the phone rings, vibrates,  
or lights up, and a dancing phone icon appears.  
The phone number of the caller also appears if it  
is not restricted. If the number is stored in your  
Contacts directory, the contact name appears.  
Slide open  
1. Open the slide.  
2. Enter the phone number and press  
.
3. Press or close slide (if “Close to End” is  
Slide open  
enabled. See “Ending calls using the slide”).  
Press  
-or-  
to answer the incoming call.  
Slide closed  
Press  
to answer the incoming call and  
You can only use the voice dialing feature when  
calling with the slide closed. Voice dialing  
requires that a contact be saved with a voice tag.  
See page 61.  
turn on the speakerphone.  
Slide closed  
Press  
to select Answer Call.  
1. Press and hold  
to initiate voice dialing.  
Answering calls using the slide  
2. Say the name of the contact when prompted.  
The phone places the call.  
You can set the phone to answer immediately  
when you open the slide. This feature does not  
apply to incoming data or fax calls.  
3. Press  
once.  
User Guide for the Kyocera Slider Remix KX5 Phone  
9
Select Menu Settings Convenience →  
Open to Answer Enabled.  
2. Scroll down the list to find the contact you  
want to call.  
Select Disabled to have the phone  
3. Highlight the name and press  
to dial  
continue ringing when you open the slide.  
the number.  
Adjusting the volume during a call  
To adjust the earpiece volume during a call,  
press up or down.  
Using the speakerphone  
Your Kyocera KX5 phone has a built-in  
speakerphone.  
To turn on the speaker, open the slide and  
press . If you press during an  
incoming call alert, you answer the call.  
The icon at the top of the phone screen  
Silencing an incoming call  
Press  
or  
.
Note: In the absence of voicemail, this feature  
drops the call.  
indicates that the speakerphone is on.  
- or -  
To turn off the speakerphone, open the slide  
Press  
then press  
to answer the call.  
and press  
.
This action silences the current call only. The next  
call will ring as normal.  
Setting the phone to hold calls  
The Hold Call feature allows you to place  
incoming calls on hold until you are ready to  
answer them.  
Redialing a number  
To redial a recent call, press  
open your Recent Calls list. Highlight a phone  
number or name and press  
Tip: To redial the last number called,  
received, or missed, press three times.  
twice to  
Note: This feature will not work if “Open to  
Answer” is enabled. See “Answering calls using  
the slide” on page 9.  
.
1. Select Menu Settings Convenience →  
Hold CallEnabled.  
Calling a saved number  
If you have already saved a phone number, you  
can use the Contacts list to find it quickly.  
If you have not recorded a hold message,  
you will be prompted to record one, such  
as “Please hold. I’ll answer in a minute.”  
1. From the home screen, press  
to select  
2. Record the message twice, as prompted.  
Contacts.  
10  
Making and Answering Calls  
3. Select Save or Options (Play, Re-Record,  
Dealing with missed calls  
or Exit).  
When you have missed a call, “Missed Call”  
appears on your screen unless the caller leaves a  
voicemail.  
The next time a call comes in, you will have the  
option of placing it on hold.  
To clear the screen, press  
to select OK.  
Placing a call on hold  
To view details of the call, press  
to select  
You can place a call on hold once you have  
enabled this feature.  
Calls then press  
To return the call, press  
then press  
.
to select Calls  
Note: If you are already on a call and you receive  
another call, you cannot place the incoming call  
on hold. It will go to voicemail.  
.
Setting missed call alerts  
You can set an alert to beep every five minutes  
after you have missed a call.  
1. When a call comes in, press  
to select  
Hold Call. The caller will be placed on hold  
and will hear your recorded hold message.  
1. Select Menu Settings Sounds →  
2. To speak to the caller, select Answer.  
Alerts Missed Call Alert.  
- or -  
2. Select an option and press  
.
To hang up without speaking to the caller,  
select End Call.  
Viewing recent call details  
Details on the last 60 calls you made, received, or  
missed are stored in the Recent Calls list and are  
identified by the following icons:  
Changing the hold message  
1. Select Menu Settings Convenience →  
Hold Call Re-Record Msg and follow the  
prompts.  
Outgoing call  
Incoming call  
Missed call (flashing)  
2. Record the message twice.  
3. Select Save or Options (Play, Re-Record,  
Viewing recent calls  
or Exit).  
1. Select Menu Recent Calls.  
2. Select a list: All Calls, Incoming Calls,  
Outgoing Calls, or Missed Calls.  
User Guide for the Kyocera Slider Remix KX5 Phone  
11  
3. Select a recent call item and press  
to  
2. Select an option: All Calls, Incoming Calls,  
Outgoing Calls, or Missed Calls.  
select Options:  
3. Press  
to select Yes.  
Save adds the phone number to the  
Contacts list.  
Speed dialing  
Send Msg sends a text message to the  
contact.  
Before you can use speed dialing, you must save a  
phone number as a contact and assign a speed  
dial location to it.  
Send Pict Msg sends a picture message to  
the contact.  
To add a speed dial location to a saved or new  
contact, see “Customizing a phone number”  
on page 21.  
Erase erases the selected call record.  
Note: If the phone number has been classified as  
“secret,” you must enter your four-digit lock code  
to view or edit it. For information on the lock  
code, see “Changing your lock code” on page 42.  
To classify a phone number as secret, see  
“Creating a new contact” on page 19.  
Using speed dialing  
To call a contact that has a speed dial location:  
From the home screen, enter the one- or two-  
digit speed dialing location and press  
.
Calling recent calls  
1-Touch dialing  
1-Touch dialing is the fastest way to speed dial a  
contact that has a speed dial location.  
Slide open  
1. Press  
2. Highlight the number you want to call and  
press  
down.  
Note: You must (1) enable 1-Touch dialing on  
your phone and (2) have a speed dial location  
assigned to a contact. See “1-Touch dialing” on  
this page.  
.
Slide closed  
1. SelectMenuRecentCallsOutgoingCalls.  
2. Highlight the number you want to call and  
Enabling 1-Touch dialing  
press  
.
Select Menu Settings Convenience →  
1-Touch Dialing Enabled.  
Erasing recent calls  
1. Select Menu Recent Calls Erase Call  
Lists.  
12  
Making and Answering Calls  
If you see “New Messages”  
Using 1-Touch dialing  
To call a contact that has a speed dial location:  
Slide open or closed  
From the home screen, press and hold the  
speed dialing number. If it is a two-digit  
number, press the first digit briefly, then press  
and hold the second digit. For example, if the  
speed dialing location is 15, press  
1. Press  
to select Call, which initiates a call  
to your voicemail number.  
2. Follow the prompts to retrieve the message.  
To clear the screen without checking messages:  
Press  
to select Ignore.  
briefly, then press and hold  
.
If you see only the  
symbol  
Setting up voicemail  
Slide open  
Before your phone can receive voicemail  
messages, you must set up a password and record  
a personal greeting with your service provider.  
When you have set up your voicemail, all  
unanswered calls to your phone are automatically  
transferred to voicemail, even if your phone is in  
use or turned off.  
1. Press and hold  
to initiate a call to your  
voicemail number.  
2. Follow the prompts to retrieve the message.  
You can set the phone to beep or vibrate every  
five minutes to remind you that you have  
voicemail. See “Setting message alerts” on  
page 39.  
1. From the home screen, press and hold  
2. Press at the message.  
.
Calling emergency services  
3. Follow the system prompts to create a  
Note: Regardless of your 3-digit emergency code  
(911, 111, 999, 000, etc.), your phone operates  
as described below.  
password and record a greeting.  
Note: If you are having trouble accessing your  
voicemail, contact your service provider.  
Dial your 3-digit emergency code and  
press  
.
Checking voicemail messages  
You can call the code even if your phone is locked  
or your account is restricted. When you call, your  
phone enters Emergency mode. This enables the  
emergency service exclusive access to your phone  
to call you back, if necessary. To make or receive  
regular calls after dialing the code, you must exit  
this mode.  
When a voice message is received, your screen  
displays “New Messages” along with the  
symbol at the top of your screen. The symbol  
flashes if the message is urgent.  
User Guide for the Kyocera Slider Remix KX5 Phone  
13  
To exit Emergency mode  
Receiving data or faxes  
When you have completed the emergency call:  
Your phone may be able to receive certain data or  
faxes, depending on the system sending the  
information. For more information, see page 44.  
1. Press  
to select Exit.  
2. Press  
again to confirm your choice.  
Note: To determine who has access to your  
location, see “Setting position location” on  
page 45.  
Understanding roaming  
Controlling network roaming  
Depending on services available from your  
service provider, you may set the phone to either  
digital or analog mode. This is useful if you are in an  
area that borders on digital service and the  
automatic feature is causing the phone to keep  
switching between modes.  
Tracking calls  
You can track the number and duration of calls  
made and received on your phone.  
1. Select Menu Recent Calls.  
2. Select a timer:  
1. Select Menu Settings Network →  
Recent Calls Timer tracks all calls you  
have made and received since you last  
reset this timer. To reset this timer to zero,  
Digital/Analog.  
2. Select an option and press  
.
press  
to select Reset.  
Automatic automatically switches the  
phone between digital and analog.  
All Calls Timer tracks all calls you have  
made and received. This timer cannot be  
reset.  
Analog only sets the phone to work in  
analog mode only.  
Analog call forces a call into analog mode  
for the duration of the next call.  
Timing your calls  
You can set your phone to beep 10 seconds  
before each minute passes when you are on a call.  
Digital only sets the phone to work in  
digital mode only.  
Select Menu Settings Sounds →  
Minute Alert Enabled.  
14  
Making and Answering Calls  
Setting an alert for roaming  
Setting Call Guard  
You may use this setting if you want the phone to  
alert you when you roam outside of your home  
service area.  
You can set the phone to warn you before you  
answer or place a call while roaming.  
Select Menu Settings Convenience →  
Call Guard Call prompt.  
1. Select Menu Settings Network →  
Roam/Svc Alert.  
The phone now emits a distinctive roam  
ring to indicate when you are roaming  
during calls.  
2. Select an option and press  
.
When no svc alerts you with three tones  
decreasing in pitch when service is lost  
and three tones increasing in pitch when  
service is acquired again.  
To accept or place a call while roaming,  
you must press  
.
Note: Call Prompt is disabled when the phone is  
in Emergency Mode.  
On roam change alerts you with two  
decreasing tones when roaming service is  
acquired and three increasing tones when  
home area service is acquired again.  
On any change alerts you with three  
increasing tones if there is a change in  
roaming service or three decreasing tones  
if the phone loses service.  
Setting the roam ringer  
You can set a ringer to indicate when an incoming  
call will be subject to roaming charges.  
Select Menu Settings Sounds →  
Roam Ringer Enabled.  
User Guide for the Kyocera Slider Remix KX5 Phone  
15  
3
ENTERING LETTERS, NUMBERS, AND SYMBOLS  
You can enter letters, numbers, and symbols in  
contacts, text messages, and your banner.  
Entering numbers  
To enter a number while in  
a number key once.  
mode, press  
or  
Understanding text entry screens  
The current text entry mode (and capitalization  
setting, when applicable) are indicated by icons.  
To enter a number while in  
mode, press and hold a number key until the  
number appears on the screen.  
characters  
remaining  
capitalization setting  
text entry mode  
Entering words letter by letter  
1. Press a key once for the first letter, twice for  
the second letter, and so on. If your phone is  
set to Spanish, French, or Portuguese,  
accented letters are available.  
text entry  
fields  
2. Wait for the cursor to move right and enter the  
next letter.  
Text entry modes  
There are five text entry modes:  
Note: To enter a space, press  
.
Entering words quickly  
Case change  
When you press a series of keys using  
checks its dictionary of common words and  
guesses at the word you are trying to spell.  
mode,  
Numbers only  
Normal alpha  
Rapid Entry  
1. For each letter of the word you want, press the  
key once. For example, to enter the word  
Add Symbol  
“any” press  
2. If the word doesn’t match what you want,  
press to look at other wordmatches.  
.
Add Smiley  
Note: The mode you start in depends on the task  
you are doing. For example, when entering a  
phone number, you’re in number mode. When  
entering a name for a contact, you’re in normal  
text mode. See “Changing modes” on page 17.  
3. When you see the word you want, press  
.
16  
Entering Letters, Numbers, and Symbols  
Entering symbols  
Changing modes  
While entering text, you can enter symbols by  
Sometimes you need to change modes. For  
pressing  
until you see the symbol you want.  
example, to enter numbers in an email address  
Using this method, you have access to the  
following symbols:  
while in  
mode, enter the numbers, and then change  
back to mode to complete the address.  
To change text entry modes:  
mode, you must change to  
.
@ ?  
To access the full set of symbols:  
1. From the text entry screen, select Options.  
!
-
,
& :  
1
Press and hold  
until the icon for the  
mode you want appears at the top of the  
screen.  
2. Select  
Add Symbol.  
3. Press  
down to view the list of symbols.  
-or-  
4. Press the number key corresponding to the  
Select Options then select a different mode.  
symbol you want.  
Capitalization settings  
You can change capitalization at any time while  
Entering smileys  
1. From the text entry screen, select Options.  
entering text. Simply press  
or lower case while in  
to choose upper  
Normal Alpha mode.  
2. Select  
Add Smiley.  
3. Press  
down to view the list of smileys.  
4. Press the number key corresponding to the  
smiley you want.  
Switching default text entry modes  
You can change the default text entry mode when  
creating a text message. This setting applies only  
to the message body screen, not the “To” screen.  
1. Select Menu Messages Msg Settings →  
Default Text.  
2. Select Normal Alpha or Rapid Mode.  
User Guide for the Kyocera Slider Remix KX5 Phone  
17  
Quick reference to text entry  
This table gives general instructions for entering letters, numbers, and symbols.  
To...  
Do this...  
Enter a letter  
Use  
mode and press a key until you see the letter you  
want. For more information, see page 16.  
Use mode and press a key once to enter its number.  
For more options, see page 16.  
Enter a number  
Enter a symbol  
Enter a smiley  
Press  
Use  
until you find the symbol you want. See page 17.  
mode and press a key once to enter its number.  
For more options, see page 17.  
Enter a space  
Press  
Press  
.
Erase a character  
.
Erase all characters  
Press and hold  
.
Move the cursor right or left  
Move the cursor up or down  
Change text entry modes  
Capitalize any letter  
Press  
Press  
right or left.  
up or down.  
Press and hold  
.
In  
In  
mode, press  
mode, press  
. Choose  
. Choose  
or  
.
Lowercase any letter  
Select soft options on the screen  
.
Press the appropriate key,  
Press right or left.  
.
Highlight an option at the bottom  
of the screen  
18  
Entering Letters, Numbers, and Symbols  
4
STORING CONTACTS  
Use your phone’s Contacts directory to store  
information about a person or company. Each  
contact entry can have up to six phone numbers,  
two email addresses, two Web addresses, two  
street addresses, and a space for notes.  
Adding a code or extension  
When you save the phone number of an  
automated service, you may include a pause to  
stop dialing, for example, where you would wait  
to dial an extension.  
1. From the home screen, enter the first portion  
Creating a new contact  
of the phone number.  
1. From the home screen, enter the phone  
number you want to save, including the  
area code.  
2. Press  
to select Options.  
3. Select a type of pause:  
Time Pause  
Hard Pause  
2. Press  
to select Save.  
3. Press  
to select Save New Contact.  
4. Enter the remaining numbers.  
5. Press to select Save.  
4. Enter a name for the contact.  
If you need to learn how to enter letters,  
see “Understanding text entry screens” on  
page 16.  
Customizing your contacts  
You can customize each contact in your Contacts  
directory by assigning ringers, pictures, and  
number types, or by classifying your contacts as  
Personal or Business.  
To add a symbol or smiley to the contact  
name, or to change the text entry mode,  
press  
to select Options.  
5. Either save now or add more contact  
information.  
Assigning ringers  
To save now, press  
to select Save.  
1. Press  
to select Contacts.  
To enter additional phone numbers, email  
and Web addresses, or notes, press  
down repeatedly. For help switching  
between numbers and letters for email or  
Web addresses, see “Changing modes” on  
page 17.  
2. Highlight a contact and press  
.
3. Highlight the contact name and press  
to  
select Options.  
4. Select Ringer Assign Ringer.  
User Guide for the Kyocera Slider Remix KX5 Phone  
19  
5. Scroll down the list to hear the different  
Assigning number types  
ringers and press  
to select one.  
When you assign a number type, an icon is placed  
in front of a contact number to specify the type of  
number, such as work, home, or mobile.  
Assigning pictures  
1. Press  
to select Contacts.  
1. Press  
to select Contacts.  
2. Highlight a contact and press  
.
2. Highlight a contact and press  
.
3. Highlight the contact name and press  
to  
3. Highlight the contact number and press  
select Options.  
to select Edit.  
4. Select Picture Assign Picture Images.  
5. Select Saved Images, Wallpapers, or Caller IDs.  
4. Press  
Options.  
down once and press  
to select  
Note: With mobile PhoneTools for Kyocera,  
you can transfer digital pictures to your  
phone. To purchase MPT or other  
accessories, visit  
5. Highlight an option to designate the number  
as General, Work, Home, Mobile, Pager, or  
Fax and press  
. The associated icon will  
appear next to the number in your Contacts  
directory and Recent Calls list.  
6. Scroll through the list to view your options  
work  
home  
mobile  
pager  
fax  
email address  
street address  
Web page URL  
note  
and press  
to assign it to your contact.  
Classifying contacts as Personal or  
Business  
1. Press  
to select Contacts.  
2. Highlight a contact and press  
.
3. Highlight the contact name and press  
to  
select Options.  
Editing a contact  
4. Select Classify.  
1. Press  
2. Highlight a contact and press  
3. Highlight the contact name or number and  
press to select Edit.  
to select Contacts.  
5. Select Personal or Business and press  
.
.
Note: To assign Personal or Business ringers, see  
“Assigning business and personal ringers” on  
page 37.  
4. Enter your changes and press  
to select  
Save.  
20  
Storing Contacts  
Send Pict Msg brings you to the picture  
messaging screen.  
Erasing a contact  
1. Press  
to select Contacts.  
Add to Speed Dial assigns or removes the  
speed dial location.  
2. Highlight the contact to erase and press  
3. Select Options.  
.
View Number to see the selected phone  
number.  
4. Highlight Erase Contact and press  
5. Press to confirm.  
.
Erase Number erases the number from  
the contact.  
Sending a vCard  
You can send contact information as a text  
messages.  
Secret makes the number secret so that it  
will not appear on the screen until the  
lock code is entered. Secret numbers can  
be called without a lock code. (For more  
information, see “Limiting calls” on  
page 43.)  
1. Press  
to select Contacts.  
2. Highlight the contact to send as a vCard and  
press  
.
3. Press  
to select Options.  
Primary Number makes this number the  
first one that shows up when you open the  
contact.  
4. Highlight Send as vCard and press  
.
5. Enter a recipient’s phone number and press  
Add Voice Dial to record a voice tag so you  
can call a contact using voice recognition  
(VR). For more information, see page 61.  
to select Send.  
Customizing a phone number  
1. Press  
Erase Voice Dial erases the voice tag  
associated with the number.  
to select Contacts.  
2. Highlight the contact to edit and press  
.
Edit Voice Dial records a new voice tag.  
3. Press  
number.  
4. Press  
down to highlight the contact  
6. Enter the new information and follow the  
prompts.  
to select Options.  
7. Select Save, if necessary.  
5. Highlight an option and press  
:
Call to call the contact.  
Send Text Msg brings you to the text  
messaging screen.  
User Guide for the Kyocera Slider Remix KX5 Phone  
21  
To call the contact, highlight the number  
and press  
Finding contact information  
.
To find a phone number or contact, you can (1)  
check the Frequent list, (2) search the Contacts  
directory, or (3) use Fast Find.  
Setting Fast Find  
With Fast Find, you press one or two keys to view  
close matches of the number you are looking for.  
Checking the Frequent List  
Select Menu Settings Convenience →  
From the home screen, select Contacts. The last  
15 of your most frequently called contacts appear  
when the Frequent List is enabled. Scroll past the  
double line to view the All Contacts list.  
Fast Find Enabled.  
Using Fast Find  
1. From the home screen, press the keys  
corresponding to the letters of the name you  
want to find. A matching contact or speed dial  
entry appears.  
To enable the Frequent List setting  
Select Menu Settings Convenience →  
Frequent List Enabled.  
2. Press  
entries.  
down to scroll through matching  
Searching the Contacts directory  
1. Select Contacts for a list of all contacts.  
To quickly get down the list, enter the first  
letter of the contact. The menu skips to that  
letter of the alphabet.  
3. Highlight the name you want then press  
to  
call the number.  
- or -  
Select Menu Contacts.  
2. Select a search method:  
View All lists all saved contacts.  
Find Name locates a specific name. Enter  
part of the contact name then select Find.  
Speed Dial List, Voice Dial List, Messaging  
Groups, Business List, or Personal List  
selects a contact from the specified list.  
3. Highlight a contact and press  
.
22  
Storing Contacts  
5
USING THE CAMERA  
Slide open  
Tips before operating your  
camera  
Press  
until you hear one beep to  
activate camera mode.  
You cannot activate the camera while  
on an active call or while browsing files in the  
media gallery.  
Press  
until you hear two beeps to  
activate video mode.  
Once the camera is active, the home screen  
acts as the viewfinder.  
Setting up the camera for  
photos  
1. With the slide open, select Menu Camera.  
If you get a “Low memory” error, check your  
resolution and quality compression settings.  
See “Setting up the camera” on this page.  
2. Press  
to select Options .  
If there is no activity within 45 seconds after  
you turn your camera on, the camera quits  
and returns to the previous launch point.  
3. Press  
to select Settings.  
4. Highlight an option and press  
:
Flash options are On, Off, or Automatic.  
Menu settings and options can only be  
accessed when the camera is active.  
Resolution options are 1280 x 960 (best  
for printing), 640 x 480, 320 x 240 (best  
for sending to email), and 160 x 120.  
Accessing camera and video  
modes  
The camera can be used with the slide open  
or closed.  
Low Light Mode brightens the picture for  
low light environments.  
Self Timer options are Off (default) or 3,  
5, or 10 second pauses. When set, the  
camera beeps from 3 seconds down to the  
time the shutter snaps the picture  
Slide closed  
Press  
until you hear one beep to  
automatically. Self Timer is not available  
when Multishot mode is activated.  
activate camera mode.  
Press  
until you hear two beeps to  
activate video mode.  
User Guide for the Kyocera Slider Remix KX5 Phone  
23  
Multishot allows you to take up to six  
multiple pictures while the camera key is  
pressed and held. A tone will play each  
time a picture is taken. A second tone will  
play when the final picture is taken.  
The following settings remain at the setting  
you selected each time you enter and exit the  
camera application:  
Flash, Resolution, Shutter Sound, White  
Balance, Quality, LED, and Save Location.  
Shutter Sound sets the sound used when  
the camera takes a picture.  
Menu options for camera mode  
to activate camera  
White Balance allows the camera to adjust  
for different lighting. Options are  
Automatic, Fluorescent, Incandescent, or  
Daylight.  
1. Press  
or  
mode.  
Press and hold  
or to activate  
video mode.  
Quality sets the picture compression. The  
higher the compression, the better the  
detail of the picture (higher pixel rate).  
Options are Low, Medium, or High  
(default). When set to High, the picture  
file size is larger, using more memory.  
2. Select Options.  
3. Press  
up or down to scroll through the  
options on the vertical menu bar:  
Settings displays available camera settings  
you may set up prior to taking a picture.  
Video Mode toggles between video and  
camera modes.  
LED flashes a light to indicate a picture  
has been taken. Options are On (default)  
and Off.  
Brightness allows you to adjust the  
brightness of the image in the home  
screen LCD.  
Viewfinder options are Fullscreen and  
Actual.  
Camera Pictures displays all pictures  
taken and stored.  
Save Location options are Save to Card  
and Save to Phone.  
Last Picture displays the most recently  
taken picture.  
Restoring camera menu settings  
Frames allows you to add a frame or a  
stamp to your picture. A frame or stamp  
cannot be removed once it has been used  
in a picture.  
The following settings revert to the default setting  
each time you enter and exit the camera  
application:  
Low Light Mode, Self Timer, MultiShot,  
Viewfinder.  
24  
Using the Camera  
Note: The picture resolution changes to  
160 x 120 while taking pictures with frames.  
The resolution returns to the original setting  
once Frames is disabled.  
Taking a picture  
Slide open or closed  
1. Select Menu Camera.  
2. Focus on the image using the phone’s display  
Camera mode indicators and  
icons  
as the viewfinder.  
Tip: Press  
up or down to zoom in or  
The camera mode displays the following onscreen  
indicators and icons:  
zoom out.  
3. Take the picture using one of two methods:  
Press or  
to select OK or  
.
Icon  
Description  
4. Press  
to select  
Flash on  
Erase.  
Camera mode  
Video mode  
5. Press  
when finished taking pictures.  
Camera key map  
Top right hand  
Number of snapshots  
corner numbers remaining  
Slide open or closed  
Key  
Camera  
Menu Screen  
Zoom level  
Take picture  
Dismiss menu options  
Bottom left  
hand numbers  
Resolution setting  
Select Capture Select OK.  
to take picture  
Select Options Cancel, dismisses  
menu  
Multishot  
Self Timer  
Up  
Down Zoom out  
Takes picture  
Zoom in  
Scroll menu options  
right  
Scrolls menu options  
left  
Select menu option  
User Guide for the Kyocera Slider Remix KX5 Phone  
25  
Setting up the video camera  
Menu settings can only be accessed when the  
camera mode is activated.  
Recording a video  
When you begin recording, a tone sounds, the  
video record icon blinks, and a “Recording”  
indicator with a timer progress bar displays. A  
tone sounds when the video stops recording.  
1. Select Menu Camera.  
2. Press  
to select Options.  
3. Press  
up or down to scroll through the  
Slide open or closed  
vertical menu bar.  
1. Select Menu Camera.  
4. Highlight Video Mode and press  
.
2. Press  
3. Scroll up or down on the vertical menu bar  
using to select the Video Mode option.  
to select Options.  
Menu options for video mode  
1. With the slide open, select Menu Camera.  
2. Press  
4. Focus on the image and press  
to  
to select Options.  
select Record.  
3. Press  
up or down to scroll through the  
Tip: Press  
up or down to zoom in  
vertical menu bar.  
or zoom out.  
4. Highlight and select Video Mode.  
5. Select Options.  
5. If you want to pause the recording, press  
to select Pause. To continue recording, press  
to select Resume.  
6. Press  
up or down to scroll through the  
vertical menu bar and choose an option:  
6. When finished recording, press  
to  
Settings allows you to change your  
camera settings. See “Setting up the  
camera for photos” on page 23.  
select Stop.  
7. The recorded video is immediately saved to  
Media Gallery Videos Video Album.  
Camera toggles between video and camera  
modes.  
8. Press the Back or End key when finished  
taking videos. This will take you back to the  
main menu screen.  
Brightness allows you to adjust the  
brightness of the image in the home  
screen LCD.  
Video Album displays all the videos  
recorded and stored.  
Last Video plays the most recently  
recorded video.  
26  
Using the Camera  
Video key map  
Slide open or closed  
Key  
Video Camera  
Function  
Menu  
Function  
“Record” – starts  
“OK” –  
recording toggle (plays a selects option  
tone)  
“Stop” – stops recording  
toggle (plays a tone)  
“Options” – while not  
recording  
“Cancel” –  
dismisses  
menu  
“Pause/Resume” –  
pauses and resumes  
recording toggle  
When not recording,  
goes back to the last  
function.  
Dismisses  
menu options  
While recording, stops  
recording.  
Exit to idle when not  
recording.  
Exit to idle  
Up  
Zoom in  
Scrolls menu  
options up  
Down Zoom out  
Scrolls menu  
options down  
User Guide for the Kyocera Slider Remix KX5 Phone  
27  
6
USING THE MUSIC PLAYER  
Use your phone’s Music Player to listen to your  
favorite songs. Store music files directly on an  
external storage card for your own portable  
music library.  
2. Hold the card with the metal contacts facing  
up and push the card in the slot until it clicks  
into place.  
3. Close the cover.  
4. The phone will automatically begin to format  
the card and “Card now ready for use.”  
appears after completion.  
Removable memory card  
Your Kyocera KX5 phone uses a removable memory  
card that, when inserted into the phone, increases  
storage capacity. You can drag and drop files stored  
on your computer directly onto the card.  
5. Once the TransFlash card has been formatted,  
you can place (drag and drop) your music  
files onto the card.  
The removable memory card supports mp3, aac,  
mp4, 3gp, 3g2, m4a, and m4b file types, up to  
512 MB.  
Manual  
Note: Formatting or reformatting a card erases all  
data and music files that were previously saved on  
the TransFlash card.  
Protected files may be copied to the card, but will  
not play properly if not supported.  
1. Lift the TransFlash cover up. (See item 18 in  
Formatting the memory card  
the picture on page 4).  
Before you can listen to music through your KX5  
phone, you will need to initialize the TransFlash  
memory card (optional accessory). The memory  
card can be formatted automatically or manually.  
2. Hold the card with the metal contacts facing  
up and push the card in the slot until it clicks  
into place.  
3. Close the cover.  
Automatic  
4. Select Menu Settings Memory Card →  
Format Card.  
Note: Formatting or reformatting a memory card  
erases all data and music files that were  
5. Press  
to select Yes and format the card.  
previously saved on the TransFlash memory card.  
6. The message “Card now ready for use.”  
appears after completion.  
1. Lift the TransFlash cover up. (See item 18 in  
the picture on page 4).  
28  
Using the Music Player  
4. Place music files into the “Music” folder  
Putting music files onto the  
memory card  
located on the memory card.  
Music files can be put onto the memory card by  
either using an optional memory card reader for  
your computer or by using an optional KX5 USB  
cable and placing the KX5 into Mass Storage Mode.  
Note: Use only a previously formatted memory  
card when loading music files.  
Using a Memory Card Reader  
Using a KX5 USB cable  
1. Connect the memory card reader to your  
1. Load the USB Drivers CD onto your computer  
and follow the on-screen prompts. (This is  
only required during the initial set-up).  
computer.  
2. Insert the memory card into the memory card  
reader. Locate the Removable disk drive on  
your computer.  
2. Plug the USB cable into bottom of the KX5  
3. Plug the USB cable into a USB port on your  
computer.  
4. On the phone select Menu Settings →  
USB Storage Enabled.  
5. our KX5 phone will now be 'viewed' by your  
computer as a 'Mass Storage Device'  
6. On your computer double click on 'My  
Computer'  
7. You will see the Transflash Card inserted in  
the KX5 as a Removable disk drive.  
3. Locate the music files to be placed onto the  
memory card and “drag and drop” them to  
the Removable disk drive.  
8. Double click on the appropriate Removable  
Disk drive  
Note: The KX5 supports the following music  
file types: .mp3, .aac, .mp4, .3gp, .3g2, .m4a  
and m4b.  
9. Double click on the Music folder.  
User Guide for the Kyocera Slider Remix KX5 Phone  
29  
10. Drag and Drop your music files into the  
Note: The Music Player cannot be accessed  
until songs have been loaded onto your phone  
by your service provider or an external  
memory card has been inserted into the  
TransFlashTM slot.  
Music folder.  
2. Highlight a song and press  
or select Play.  
Note:  
When the card is in your phone, the songs on  
the card appear in the Media Gallery menu.  
However, songs are not stored in the Media  
Gallery unless they have been preloaded onto  
your phone by your service provider.  
Note: The KX5 supports the following music  
file types: .mp3, .aac, .mp4, .3gp, .3g2, .m4a  
and m4b.  
Incoming calls, Scheduler events, and the  
alarm clock will interrupt the Music Player. An  
interrupted song will begin again at the point  
it left off with the press of a softkey.  
11. To properly disconnect the KX5 from your  
computer you need to double click on the  
Safely Remove Hardware icon in the System  
Tray on your computer. Follow the prompts to  
Stop or remove a Mass Storage Device.  
Text messages will not interrupt the player;  
however, an icon will appear to notify you of  
new messages.  
12. When you are done placing music onto the  
There are more volume settings in the Music  
Player to allow for finer volume adjustments  
when listening to music through a Kyocera  
headset.  
memory card, press  
.
Playing music  
You must have a Transflash memory card  
(optional) with music stored on it to use the  
Music Player.  
Note: For this and other accessories, visit  
1. From the home screen, press and hold  
.
- or -  
Select Menu Music Player.The Music Player  
screen appears.  
30  
Using the Music Player  
Auto Off  
Music Player controls  
While you are listening to a song, you can use the  
The phone exits the Music Player after it has been  
paused or stopped for a selected amount of time if  
the Auto Off feature is enabled.  
Navigation key  
as follows:  
Up - View the playlist.  
1. Select Menu Music Player.  
Down - Restart the song.  
Left - Play the previous song in the playlist.  
Right - Play the next song in the playlist.  
2. Press  
to select Options.  
3. Select Auto Off.  
Press  
to pause or resume a selected song.  
4. Select an option and click  
: 10 minutes, 20  
minutes, or Off.  
Playback options  
Viewing details about a song file  
To see the file type and size of a file:  
Shuffle  
Note: Shuffle is inactive if there are fewer than  
three songs.  
1. From the home screen, press and hold  
select Menu Music Player. The playlist  
appears.  
or  
1. Select Menu Music Player.  
2. Press  
to select Options.  
2. Highlight a song and select Options→  
Now Playing.  
3. Select Shuffle On. The Shuffle icon  
appears.  
This option changes to Shuffle Off if  
Shuffle On has already been selected.  
Viewing details about the  
playlist  
To view the total number of songs and the amount  
of memory available on the phone and the card:  
Repeat  
1. Select Menu Music Player.  
2. Press  
1. Press and hold  
or select Menu →  
to select Options.  
Music Player. The playlist appears.  
3. Select Repeat On. The Repeat icon  
2. Select Options Playlist Details.  
appears.  
This option changes to Repeat Off if  
Repeat On has already been selected.  
User Guide for the Kyocera Slider Remix KX5 Phone  
31  
Erasing a song  
You can erase a song from the card using the  
phone.  
1. From the home screen, press and hold  
or  
select Menu Music Player.  
2. Highlight the song.  
3. Select Options Erase Song Yes.  
Troubleshooting  
Scenario: Song is not playing  
Try renaming the file on your PC, removing any  
special characters, spaces, and limiting the length  
to 30 characters long.  
If the file still does not play:  
The file type may not be supported.  
The file may be DRM (digital rights  
management) protected.  
The file may be corrupted.  
Scenario: Audio is choppy  
The file may be corrupted, but the audio still  
plays. Check your file for corruption.  
32  
Using the Music Player  
7
USING MEDIA GALLERY  
The Media Gallery stores camera pictures,  
images, sounds, and videos in the phone and  
displays those files on the phone’s screen.  
3. Press  
to select Send and launch the  
multimedia messaging application.  
- or -  
Press  
to select Options:  
Accessing files  
1. Select Menu Media Gallery.  
2. Select an option:  
Erase the image.  
Assign picture as a Caller ID or  
as wallpaper.  
Camera Pictures displays thumbnails of  
the photos you have taken in  
chronological order.  
Zoom allows you to zoom in or out on  
the picture.  
Take Picture to snap another photo.  
Images displays a list of categories that  
contain preloaded, downloaded, saved, or  
created files such as wallpaper, screen  
savers, or caller IDs.  
Lock to prevent accidentally erasing the  
photo.  
Rename the photo.  
Details of the file.  
Sounds displays a list of categories that  
contain saved or downloaded sounds such  
as ringers and voice memos.  
Browsing images  
The images menu allows you to assign your files  
to various applications.  
Videos displays a list view of the file names  
of videos that you recorded.  
1. Select Menu Media Gallery Images.  
Browsing pictures  
1. Select Menu Media Gallery →  
Camera Pictures.  
2. Highlight an option and press  
:
Saved Images displays available images.  
Wallpapers displays wallpaper selections.  
2. Highlight a picture and press  
to  
Screen Savers displays  
select View.  
available screensavers.  
Caller IDs displays pictures and images  
saved and the text IDs you assigned them.  
User Guide for the Kyocera Slider Remix KX5 Phone  
33  
3. Press  
to select Send and launch the  
Ringers contains ringers saved on your  
phone.  
multimedia messaging application.  
- or -  
Press  
Voice Memos contains voice memos you  
made to yourself.  
to select Options (options vary  
according to selection):  
3. Highlight an option and press  
Send launches the messaging application  
so you can share the image.  
(options vary according to selection):  
Play to review the sound.  
Set as Default to assign the image as a  
Record New allows you to record  
new videos.  
wallpaper or screen saver.  
Assign to assign the image to a contact.  
Erase the videos.  
Erase the image (image must not be  
Lock to prevent accidentally erasing  
the video.  
locked).  
Details gives you the file size of the image.  
Rename allows you to rename the  
video file.  
Erase All erases all images stored (images  
must not be locked).  
Details gives you the file size of the video.  
4. Select Close or press  
when done.  
Erase All erases all videos stored.  
4. Select Close when done.  
Browsing sounds  
1. Select Menu Media Gallery Sounds.  
2. Highlight an option and press  
Browsing videos  
1. Select Menu Media Gallery Videos.  
2. Highlight an option and press  
:
Saved Sounds contains sounds saved on  
:
your phone.  
Video Album contains videos taken with  
Music contains preloaded songs (not  
available on all phones, check with your  
service provider.)  
your camera.  
Saved Videos contains videos that  
were downloaded.  
34  
Using Media Gallery  
3. Select Play to review a video. Use  
to  
highlight Play  
or Rotate Right  
- or -  
, Stop  
.
, Rotate Left  
,
Select Options and choose from the  
following options:  
Send launches the messaging application  
so you can share the videos.  
Record New allows you to record new  
videos.  
Erase the videos.  
Lock to prevent accidentally erasing the  
video.  
Rename allows you to rename the video  
file.  
Details gives you the file size of the video.  
Erase All erases all videos stored.  
4. Select Close when done.  
User Guide for the Kyocera Slider Remix KX5 Phone  
35  
8
CUSTOMIZING YOUR PHONE  
The contents of the Settings menu are as follows.  
Silent Mode  
Vibrate Only  
Display  
My Banner  
Voice Features  
Add Voice Dial  
Network  
Data/Fax Calls  
Vibe then Ring  
Lights Only  
Normal Sounds  
Main Menu View  
Color Themes  
Wallpaper  
Screen Saver  
Backlighting  
Auto-Hyphen  
Language  
Erase Voice Dial  
Voice Training  
Voice Wake-Up  
Voice Answer  
Expert Mode  
Privacy Alert*  
Set Phone Line*  
Roam/Svc Alert  
Roam Option  
Digital/Analog  
Location  
Keyguard  
Guard on Close  
Disabled  
Messaging  
Alerts  
Signature  
Accessories  
Pwr Backlighting  
Sounds  
Ringer Volume  
Time/Date  
Contrast  
Brightness  
Edit QuickText  
Auto Retrieve  
Callback Number  
Text Msg Receipt  
Save to Sent  
Headset Ringing  
Auto-Answer  
Com Port Speed  
TTY Device  
Ringer Type  
Business Ringer  
Personal Ringer  
Roam Ringer  
Alerts  
Convenience  
Open to Answer  
Close to End  
Fast Find  
USB Storage  
Auto-Erase  
Slide Open  
Frequent List  
Hold Call  
1-Touch Dialing  
Web Prompt  
Call Guard  
Default Text  
Voicemail Number  
Slide Closed  
Pwr On/Off Sound  
Key Volume  
Security  
Lock Phone  
Limit Calls  
New Lock Code  
Erase Contacts  
Emergency Numbers  
Key Length  
Smart Sound  
Minute Alert  
Earpiece Volume  
Spkrphone Volume  
Memory Card  
Items to Save  
Format Card  
*Not available on all phones. Check with your service provider.  
36  
Customizing Your Phone  
Shortcut to Vibrate Only mode  
With slide open, press and hold  
Turning sounds back on  
With slide open, press and hold  
Silencing all sounds  
.
.
Your phone is set to make sounds when you  
receive calls, press keys, navigate through menus,  
and receive alerts (such as new messages).  
You can silence all sounds and set the phone to  
vibrate or light up when you receive calls  
andalerts.  
Choosing ringers  
Your Kyocera KX5 phone has multiple ringers you  
can choose to use for incoming calls.  
Setting the phone to vibrate or light up  
1. Select Menu Settings Sounds →  
1. Select Menu Settings Silent Mode.  
Ringer Type.  
2. Choose an option and press  
:
2. Scroll down the list to hear the different rings  
Vibrate Only: The phone vibrates for the  
and press  
to select one.  
duration of the incoming call or other  
alerts. appears.  
Note: Downloaded ringers are added to the end  
of the standard list of ringers.  
Vibe then Ring: The phone vibrates for the  
first 10 seconds and then ring for the  
remainder of the incoming call alert.  
appears.  
Assigning business and  
personal ringers  
You can assign ringers to contacts classified as  
Business or Personal in your Contacts directory.  
Lights Only: The phone lights up for the  
duration of the incoming call or other  
alerts. appears.  
Note: To classify a contact as Business or  
Personal, see page 19.  
Normal Sounds: The phone rings for the  
incoming call or alert (in effect, returns  
phone to a non-silent mode).  
1. Select Menu Settings Sounds.  
2. Ηighlight Business Ringer or Personal Ringer  
and press  
.
Note: The phone will ring when it is attached to  
an external power source (such as a charger),  
even if all sounds have been silenced.  
3. Select a ringer and press  
.
User Guide for the Kyocera Slider Remix KX5 Phone  
37  
Adjusting the earpiece volume  
Setting sounds for your phone  
To adjust the earpiece volume manually during a  
You can set your phone to sound tones when you  
open and close the slide and when you turn the  
phone on and off. Sounds will not occur during an  
incoming call, if you are in a call, or if a headset or  
hands-free car kit is attached to your phone.  
call, press  
or  
up or down.  
To set the earpiece volume:  
1. Select Menu Settings Sounds →  
Earpiece Volume.  
2. Press  
right to increase the volume, or left  
Set sound when slide opens  
to decrease the volume.  
1. Select Menu Settings Sounds →  
Slide Open.  
3. Press  
to select Save.  
2. Scroll through the list to hear the sounds and  
Using smart sound  
press  
to select one.  
You can set a baseline volume that the phone uses  
to automatically adjust the earpiece volume when  
there is a change in the amount of noise around  
you or the caller’s voice.  
Set sound when slide closes  
1. Select Menu Settings Sounds →  
Slide Closed.  
Select Menu Settings Sounds →  
2. Scroll through the list to hear the sounds and  
Smart SoundEnabled.  
press  
to select one.  
Adjusting the ringer volume  
Set sound when phone powers on  
or off  
1. Select Menu Settings Sounds →  
Ringer Volume.  
Select Menu Settings Sounds →  
Pwr On/Off Sound Enabled.  
2. Press  
right to increase the volume, or left  
to decrease the volume.  
To deselect this sound, select Disabled.  
3. Press  
to select Save.  
Adjusting volume  
You can adjust the earpiece, speakerphone, and  
ringer volume as well as key tones.  
38  
Customizing Your Phone  
2. Select the type of alert: Message Alert,  
Page Alert, Voicemail Alert or  
Missed Call Alert.  
Adjusting speakerphone volume  
1. Select Menu Settings Sounds →  
Spkrphone Volume.  
3. Press  
to select an option:  
2. Press  
right to increase the volume, or left  
Vibrate, Beep, Freeway!, Game!, Bloop!,  
Winner!, Zilofon! sets the phone to alert  
you once when a new message is received.  
to decrease the volume.  
3. Press  
to select Save.  
Adjusting key tone volume  
Vibrate & Remind, Beep & Remind, FWY!  
& Remind, Game! & Remind, Bloop! &  
Remind, Winner! & Remind, Zilofon! &  
Remind sets the phone to notify you once  
when a new message is received and then  
notify you again every five minutes. To stop  
You can change the volume of the tones the phone  
makes when you press the keys.  
1. Select Menu Settings Sounds →  
Key Volume.  
2. Press  
right to increase the volume, or left  
a reminder alert, press  
to  
to decrease the volume.  
select Ignore.  
3. Press  
to select Save.  
Disabled turns off message alerts.  
Setting key length  
Using shortcuts  
From the home screen, press  
directions to access three shortcuts and one  
custom menu.  
You can change the duration of the tones the  
phone makes when you press the keys.  
in one of four  
1. Select Menu Settings Sounds →  
Key Length.  
Up: Access your Custom Menu  
Down: Access Recent Calls  
Left: Launch Web Browser  
Right: Record Voice Memo  
2. Choose Normal or Long and press  
.
Setting message alerts  
You can choose how you want be alerted of  
incoming voicemail, pages, or text messages.  
1. Select Menu Settings Messaging →  
Alerts.  
User Guide for the Kyocera Slider Remix KX5 Phone  
39  
2. Press  
to select Edit.  
Creating and updating your  
custom menu  
3. Press  
to clear the screen.  
4. Enter your new text.  
You can create a custom menu that contains your  
favorite features. After you set up your menu,  
5. Press  
to select Save.  
simply press and hold  
up to access it.  
Choosing a menu view  
1. Press and hold  
up to launch  
Three menu views are available: Wheel, Graphic,  
and List.  
Custom Menu.  
2. Select Manage List.  
1. Select Menu Settings Display →  
3. Scroll through the available options and press  
Main Menu View.  
to select or deselect options.  
2. Select an option and press  
.
You may select more than one feature.  
Items appear in alphabetical order in  
the menu.  
Graphic displays icons of each menu item,  
with its name at the bottom of the screen.  
4. Highlight Save Changes and press  
.
List displays a list of each menu item.  
Wheel displays a rotating graphic image of  
the menu items.  
Choosing a different language  
Your phone may display alternative languages.  
1. Select Menu Settings Display →  
Language.  
3. Press  
to return to the home screen. The  
next time you select Menu, you will see the  
menu view you selected.  
2. Select a language and press  
.
Adjusting the backlighting  
Your screen lights up while you are in a call or  
when you press a key on the keypad. However,  
you can set the length of time that bright  
backlighting remains on.  
Personalizing the screen  
Changing your banner  
The banner is the personal label for your phone.  
It appears on the home screen above the time and  
date. The banner can be up to 14 characters long.  
1. Select Menu Settings Display →  
Backlighting Duration.  
2. Select an option and press  
:
1. Select Menu Settings Display →  
My Banner.  
40  
Customizing Your Phone  
7 seconds, 15 seconds, or 30 seconds—  
(Default) Turn backlighting on for 7, 15,  
or 30 seconds after your last keypress.  
Note: The battery charges more slowly when  
power backlighting is on.  
Changing the display contrast  
7 sec. & in call, 15 sec. & in call, or 30 sec.  
& in call—Turn backlighting on for the  
duration of a call, and for 7, 15, or 30  
seconds after your last keypress.  
1. SelectMenuSettingsDisplayContrast.  
2. Press  
left or right to adjust the contrast  
and select Save.  
Note: The “in call” settings drain the battery  
more quickly.  
Setting numbers to auto-hyphenate  
Auto-hyphenation, when enabled, automatically  
inserts hyphens into your phone numbers to be  
consistent with the U.S. dialing plan.  
Using Power Save Mode  
You can conserve battery life by activating Power  
Save mode to dim the backlight set in the  
procedure above. The backlighting appears for  
the selected duration but is less bright than with  
Power Save off.  
For example, 1-222-333-4444.  
Select Menu Settings Display →  
Auto-Hyphen Enabled.  
Selecting a screen saver  
Select Menu Settings Display →  
Backlighting Pwr Save Mode On.  
Screen savers appear on the home screen when  
the slide is open or closed and are activated 10  
seconds after the last keypress. Incoming calls  
and alerts override screen savers.  
Setting power backlighting  
You can set backlighting to remain on when an  
external power source, such as the AC adapter, is  
used with the phone.  
1. Select Menu Settings Display →  
Screen Saver.  
2. Highlight a screen saver and press  
. The  
Note: Power backlighting may not be available  
with the optional desktop charger or other  
accessories.  
image displays.  
3. Press  
to assign the screen saver.  
Tip: Use the power backlighting as a night light  
4. Press  
to return to the home screen  
when traveling.  
and wait 10 seconds to view the screen saver  
you chose.  
1. Select Menu Settings Accessories →  
Pwr Backlighting.  
Note: Downloaded screen savers are added to  
the end of the list.  
2. Select Always On to keep backlighting on.  
User Guide for the Kyocera Slider Remix KX5 Phone  
41  
1. Select Menu Settings Security.  
Selecting wallpaper  
2. Enter your four-digit lock code  
Wallpaper appears on the home screen.  
3. Select New Lock Code. A message appears:  
1. Select Menu Settings Display →  
“Change Code?”  
Wallpaper.  
4. Press  
digit code.  
to select Yes and enter a new four-  
2. Highlight a wallpaper design and press  
.
3. Select Assign to save your selection.  
5. Enter your new lock code again.  
4. Press  
to return to the home screen.  
Locking your phone  
Selecting a color theme  
When your phone is locked, you can call only  
emergency numbers or your service provider’s  
number. You can still receive incoming calls.  
You can select a color theme for the display  
background of your phone.  
1. Select Menu Settings Display →  
1. Select Menu Settings Security.  
2. Enter your four-digit lock code.  
3. Select Lock Phone.  
Color Themes.  
2. Scroll through the options to view the  
color themes and press  
to select one.  
4. Highlight an option:  
Choosing a different time/date format  
Never does not lock the phone.  
1. Select Menu Settings Display →  
On power up locks the phone every time  
Time/Date.  
you turn it on.  
2. Highlight an option and press  
.
Now locks the phone immediately.  
5. Press  
.
Creating a secure environment  
This section describes all the features involved in  
securing your phone and preventing access to  
personal information. All security features are  
shielded by a four-digit lock code.  
Unlocking the phone  
1. From the home screen, press  
to  
select Unlock.  
2. Enter your four-digit lock code.  
Changing your lock code  
The lock code is typically 0000 or the last 4 digits  
of your phone number.  
42  
Customizing Your Phone  
Limit Outgoing calls only. Incoming calls  
can still be received and answered.  
Designating emergency numbers  
The emergency numbers feature allows you to  
specify three personal phone numbers that can be  
called when the phone is locked.  
Limit All calls, both incoming and  
outgoing.  
1. Select Menu Settings Security.  
2. Enter your four-digit lock code.  
3. Select Emergency Numbers.  
4. Select an Unassigned slot.  
Erasing all contacts  
You can erase all entries from your  
Contacts directory.  
1. Select Menu Settings Security.  
2. Enter your four-digit lock code.  
3. Select Erase Contacts.  
5. Enter the phone number, including the area  
code. Do not enter 1 before the area code.  
6. Press  
Notes:  
to select Done.  
4. Select Yes to erase all contacts. A message  
appears: “Erase ALL Contacts?”  
You can view these numbers only when they’re  
being entered for the first time.  
5. Press  
to select Yes to erase all contacts.  
You cannot edit these numbers.  
Network settings  
To make a call to an emergency number from  
a locked phone, you must dial the number  
(including area code) exactly as it was stored  
in Emergency Numbers.  
Switching between phone lines  
Your phone can have two service accounts, or  
phone lines, associated with it. Each phone line  
has its own phone number.  
Limiting calls  
When you are using one line, you cannot receive  
calls from the other. It would be as if the phone  
were “off” for that number. Your voicemail,  
however, will still take messages. All contacts and  
settings are shared for both lines.  
You can limit the calls that can be made from your  
phone to emergency numbers, your contacts, and  
your service provider’s numbers.  
1. Select Menu Settings Security.  
2. Enter your four-digit lock code.  
3. Select Limit Calls.  
4. Choose an option and press  
No Limit limits no calls.  
:
User Guide for the Kyocera Slider Remix KX5 Phone  
43  
Note: You must first establish a second phone  
line with your service provider. Once established,  
a second phone number becomes available in the  
menu for selection:  
To receive data or faxes, you must connect the  
phone to a laptop or PC and switch the phone  
from voice mode to data/fax mode.  
Note: To purchase a cable, call 800-349-4188  
(U.S.A. only), 858-882-1410, or visit  
1. Select Menu Settings Network →  
Set Phone Line.  
2. Select one of the two lines and press  
.
1. Connect the phone to the laptop or PC.  
2. Set the Com speed.  
Data Settings  
3. Select Menu Settings Network →  
Data/Fax Calls.  
Setting Com port speed  
4. Press  
to select an option:  
The Com Speed sets the data rate at which your  
phone connects to a laptop or PC, or at which it  
sends and receives over-the-air text messages.  
Voice only allows only voice calls.  
Fax, next call or Data, next call sets the  
phone to fax mode or data mode for the  
next incoming call or the next 10 minutes.  
1. Select Menu Settings Accessories →  
Com Port Speed.  
Fax, until off or Data, until off forces the  
phone into fax mode or data mode until  
the phone is turnedoff.  
2. Select the speed. The options are: 19.2 kbps,  
115.2 kbps (default), 230.4 kbps, and Other.  
Note: There may be a higher charge for  
making calls using high-speed data in areas  
where 1X service is available. Check with your  
service provider for details.  
Note: You cannot receive voice calls while the  
phone is in data/fax mode.  
Connecting to a TTY/TDD device  
Setting the phone to receive data  
or faxes  
You can connect the phone to a TTY device for the  
hearing impaired. Note: Enable TTY only when  
using the phone with a TTY device.  
Your phone may be able to receive certain data or  
faxes, depending on the system sending the  
information. You cannot receive voice calls while  
the phone is in data/fax mode.  
1. Connect the TTY device to the phone.  
2. Enter  
your keypad.  
3. Press to select the TTY option.  
from  
44  
Customizing Your Phone  
4. Close the Information window by pressing  
to select OK.  
5. Highlight TTY On and press  
.
Setting position location  
This setting allows you to share your location  
information with network services other than  
emergency services (For example: 911, 111, 999,  
and 000) in markets where service has been  
implemented.  
Note: This feature works only when your phone is  
in digital mode. You do not have the option of  
turning off the locator to emergency services.  
1. Select Menu Settings Network →  
Location.  
2. Select 911 Only or Location On.  
911 Only (default) shares your position  
information only with emergency services  
when you call your 3-digit emergency  
code (911, 000, 111, etc.).  
Location On shares your position  
information with your service provider’s  
network, in addition to emergency  
services.  
User Guide for the Kyocera Slider Remix KX5 Phone  
45  
9
SENDING AND RECEIVING TEXT MESSAGES  
This chapter describes how to send, receive, and  
erase text messages from your phone. For  
information on voicemail messages, see “Setting  
up voicemail” on page 13.  
3. Add another recipient if desired:  
Press  
to select Options then select  
Recent List, Contacts, or Group Lists.  
- or -  
Important: The features and menus described in  
this chapter may vary depending on services  
available in your area. Check with your service  
provider for details and possible usage charges.  
Enter a space or comma after the first  
number then enter another recipient  
manually.  
Note: You can send a message to up to 10  
contacts at once. The messages will be sent  
one at a time, once to each addressee.  
Sending text messages  
You can only send text messages to phones that  
are capable of receiving them or to email  
addresses.  
4. When you are done entering addresses,  
press  
twice.  
5. Enter the message. To learn how to enter text,  
see “Understanding text entry screens” on  
page 16.  
Creating a text message  
1. Select Menu Messages New Text Msg.  
2. Enter a recipient’s phone number or email  
- or -  
Add QuickText, symbols, or emoticons in your  
message. See “Including prewritten text and  
symbols” on page 47 for information.  
address:  
Select Options to access your Recent List,  
Contacts, or Group Lists and press  
Select a contact and press  
Highlight the number field and press  
.
6. Press  
to select Send. See “Setting  
.
sending options” on page 47 for information  
about how and when you want the message to  
be received.  
.
For more about group lists, see “Creating  
group lists” on page 51.  
- or -  
Enter a New Address manually. (To learn  
how to enter text, see “Understanding text  
entry screens” on page 16.)  
46  
Sending and Receiving Text Messages  
Select a contact and press  
the number field and press  
. Highlight  
.
Including prewritten text and symbols  
During text entry, you can insert QuickText,  
symbols, or emoticons in your message.  
Save Message saves the message in  
your Drafts folder. This prevents the  
message from being deleted if you have  
activated AutoErase and enables you to  
send the message to others.  
1. From the text entry screen, select Options.  
2. Select an option and press  
:
Insert QuickText: Scroll through the list of  
options and press to select one.  
Save QuickText saves the message you  
have just entered as a prewritten message  
then returns to the message entry screen  
so you can send the message.  
Add Symbol: Scroll through the list and  
press the corresponding number key to  
select it.  
Add Smiley: Scroll through the list and  
press the corresponding number key to  
select it.  
Settings allows you to choose from the  
following after pressing  
:
Msg Receipt to request notification when  
3. When you have finished your message, select  
Send. See “Setting sending options” for  
information about how and when you want the  
message to be received.  
the message has been received.  
Set Priority labels the message as “Urgent.”  
Callback Number includes a callback  
number with the message to let recipients  
know at what number they can call you  
back. Select OK to include your own  
number or Edit to enter a different  
callback number.  
Setting sending options  
When you are ready to send a message, you have  
several options for how and when you want the  
message to be received.  
Send Later schedules a time to send  
the message.  
1. Once you have completed the message, select  
Options:  
2. When you have finished setting options, press  
Add Address returns to the “Send To”  
screen to add another recipient without  
losing the message. Select Options to  
access your Recent List, Contacts, or  
to return to the message window.  
3. Press  
to select Send.  
Group Lists and press  
.
User Guide for the Kyocera Slider Remix KX5 Phone  
47  
If you go over the character limit for a single  
message, the phone may automatically append an  
empty segment to your message to make space.  
Adding a signature  
The signature you create is included at the end of  
all outgoing messages and is counted as  
Important: Your service provider will charge you  
for each message segment.  
characters in your messages; however, it does not  
appear in the message creation screen.  
To create a signature:  
When you start a message, the maximum  
character limit appears once you are in the  
message entry field. This number counts down as  
you enter characters, until it reaches 0. If you  
continue to enter text after this counter reaches 0,  
a message segment may be appended. When you  
reach the message size limit, you are prompted to  
edit the message or alerted that the message is  
being appended.  
1. Select Menu Settings Messaging →  
Signature.  
2. Enter your signature in the text field.  
3. Select OK to save the setting.  
Note: The characters in the signature are  
included in the total character count of the  
message. See the note under step 5 in “Creating a  
text message” on page 46.  
Receiving incoming calls while  
creating messages  
If you cannot send messages  
You may not be able to send or receive messages  
if your phone’s memory is nearly full, or if digital  
service is not available at the time. To free up  
memory, erase old messages. See “Erasing  
messages” on page 50.  
If you don’t wish to answer the call, press  
to select Ignore. The phone returns to the  
message screen.  
To answer the call, press . Your message is  
saved to the Drafts folder. To return to the  
message, select Menu Messages →  
Drafts Resume.  
Understanding appended messages.  
capitalization setting  
characters  
remaining  
text entry mode  
Viewing your sent messages  
To save your outgoing messages, you must first  
enable Save to Sent.  
text entry  
fields  
1. Select Menu Messages Msg Settings →  
Save to Sent.  
2. Select an option and press  
.
48  
Sending and Receiving Text Messages  
Enabled automatically saves all  
successfully sent messages in the  
Sent folder.  
Viewing failed or pending messages  
Failed or pending messages are stored in  
your OutBox.  
Prompt allows you to choose whether or  
not to save your message when you send it.  
To view your OutBox:  
1. Select Menu Messages OutBox. A list of  
To view successfully sent messages:  
all failed or pending messages appears.  
1. Select Menu Messages Sent.  
2. Press  
2. Scroll through the list of messages and press  
up or down through the list of  
to read one.  
messages. One of the following symbols  
appears next to each message:  
The message is pending and will be sent  
when possible. You can cancel delivery of  
the message.  
The scheduled message will be sent at the  
scheduled time. You cannot cancel  
delivery of the message.  
The message cannot be sent  
because service is not available. An alert  
appears on your phone if the message  
cannot be sent.  
The scheduled message has been sent and  
will be delivered as scheduled. You  
cannot cancel delivery of the message.  
The message has been received.  
Retrieving text messages  
When a text message is received, your screen  
The message has been received and  
opened. (This symbol may not be  
available. Check with your service  
provider.)  
displays “New Messages” with the  
symbol at  
the top of your screen. The symbol flashes if the  
message is urgent.  
If you see the “New Messages” note  
The message has been sent to more than  
one recipient.  
To view the message, press  
to select  
InBox, highlight the message, and press  
to select View.  
The message has never been sent or has  
not been sent since it was last modified.  
You can cancel delivery of the message.  
To Ignore the message, press  
.
User Guide for the Kyocera Slider Remix KX5 Phone  
49  
Note: If you receive a new message while you are  
reading a message, the one you are reading will  
be replaced by the new one. You can find the  
older message in the InBox:  
Reply with Copy to reply to the message  
with a copy of the original attached.  
Save Message to save the message.  
Save as QuickText to save the text from  
the message as QuickText, which you can  
insert into other messages. Graphics and  
sound are not saved as part of  
QuickText.(For more about QuickText, see  
page 52.)  
Select Menu Messages InBox.  
If you see the  
symbol  
1. Select Menu Messages InBox. A list of all  
your received messages appears.  
indicates an “Urgent” message.  
View Sender information.  
2. Scroll through the list of messages and press  
3. Select Done.  
to read one.  
Note: The  
symbol indicates that a graphic did  
not come through. It may be too large or  
incorrectly formatted.  
Reading the message  
The options available to you may vary. Check with  
your service provider.  
Setting message alerts  
Note: Sounds embedded in text messages will not  
play if the phone is set to Silence All mode.  
You can set your phone to alert you of incoming  
text messages or pages. For more information,  
see “Setting message alerts” on page 39.  
1. If the text message is long, press  
down to  
view the entire message.  
Erasing messages  
It is a good idea to erase old messages to free up  
memory in your phone.  
2. When you are finished, you can Reply to the  
sender, Play the sound embedded in the  
message, Erase the message, Save the  
message to your Saved folder, or set additional  
Options for the message:  
You have the option of erasing text messages and  
pages as you send or read them, erasing them one  
at a time from the list in the OutBox or InBox, or  
erasing them all at once.  
Erase the message.  
Lock Msg to protect the message from  
being accidentally deleted.  
Forward the message.  
50  
Sending and Receiving Text Messages  
Erasing single messages  
1. Select Menu Messages.  
2. Select the type of text message you want to  
Customizing message settings  
To make messaging easier, you can customize  
settings for sending and receiving messages.  
erase and press  
or Saved.  
: InBox, OutBox, Sent,  
Creating group lists  
You can create and save a list of multiple  
recipients. Your Kyocera KX5 phone stores five  
group lists with up to 10 recipients per list.  
3. Highlight the message to erase and press  
.
4. Select Options.  
5. Select Erase to erase the message. A  
1. Select Menu Messages Group Lists →  
notification appears: “Erase this message?”  
Create New.  
6. Select Yes to erase the message.  
2. Enter a name for the list. For help entering  
Note: You can erase a scheduled message from  
the OutBox, but you cannot cancel delivery of  
the message.  
text, see page 16.  
3. Select Next.  
4. To enter the first phone number or email  
address, select an option:  
Erasing all messages  
Recent List to select numbers from your  
Recent List.  
1. Select Menu Messages Erase Messages.  
2. Select a folder from which to erase all  
messages: InBox, OutBox, Sent, Saved Folder,  
Drafts Folder, or All Messages. To erase  
messages from all folders, select All Messages.  
New Address to enter the phone number  
or email address manually.  
Contacts List to select numbers from your  
phone book.  
3. A message appears: “Erase all messages?”  
5. Locate the contact number and press  
.
Select Yes to erase messages or No to cancel.  
6. Select Options Recent List or Contacts.  
Erasing messages automatically  
7. Locate the contact number and press  
.
Use this setting to have old messages  
automatically erased from the InBox when  
memory is low.  
8. When finished, select Done.  
9. To send a message to your new group, see  
“Sending text messages” on page 46.  
Select Menu Messages Msg Settings →  
Auto-Erase Old InBox Msgs. Older messages  
will be erased as new messages are received.  
User Guide for the Kyocera Slider Remix KX5 Phone  
51  
Creating and editing prewritten  
messages (QuickText)  
Your phone comes with prewritten (QuickText)  
messages, such as “Please call me,” which you  
can insert into the body of a text message. You can  
edit these messages and create new ones. Your  
phone will store up to 40 QuickText messages,  
with up to 100 characters per message.  
1. Select Menu Messages Msg Settings →  
Edit QuickText.  
2. To create a new pre-written message,  
select New Msg.  
-or-  
To edit an existing pre-written message,  
highlight the message and select Edit.  
3. Enter or edit the text and press  
to select  
Done. For help entering text, see  
“Understanding text entry screens” on  
page 16.  
Note: You can also save a message you have  
written or received as QuickText. See “Setting  
sending options” on page 47 or “Reading the  
message” on page 50.  
52  
Sending and Receiving Text Messages  
10 SENDING AND RECEIVING MULTIMEDIA MESSAGES  
4. Press  
down once to enter a message in  
Sending multimedia messages  
the Subject: field. Choose a method:  
You can only send multimedia messages to  
phones that are capable of receiving them or to  
email addresses. For details, check with your  
service provider.  
Enter the subject text manually, or  
Press  
to select Options.  
5. Press  
down once or select Next to enter a  
Multimedia messages have a predetermined  
character and file size limit. When you reach the  
character and file size limit for a single  
multimedia message, you must edit the message  
to meet the size limitation.  
brief text message in the Text: field.  
6. Press  
down once to enter the  
Image/Video: field.  
Note: You may add only one picture or one  
video per multimedia message.  
Note: Multimedia message file size limits may  
apply. For details, check with your service  
provider.  
7. Press  
to select Options. Select an option:  
Take Picture to instantly take a new photo and  
attach it to your message.  
Creating a multimedia message  
Record Video to instantly take a new video and  
attach it to your message.  
1. Select Menu Messages New Pic Msg.  
2. Enter the recipient’s phone number or email  
Media Gallery to access all picture and video  
files in the phone:  
address in the To: field.  
Camera Pictures displays your photos  
taken in a table/thumbnail view.  
3. To add additional recipients:  
Enter a space or comma after the first  
phone number or email address, then  
enter another recipient manually, or  
Highlight a photo to add to the  
multimedia message. Press  
to  
choose Select.  
Press  
to select Options. Then select  
Images displays stored images on the  
phone.  
Contacts or Group Lists.  
Note: You can send one multimedia message  
to a maximum of 10 contacts.  
Video displays stored videos on the phone.  
User Guide for the Kyocera Slider Remix KX5 Phone  
53  
8. Press  
down once to enter the Sound:  
to select Options. Choose:  
Receiving multimedia messages  
field and press  
There are two settings for receiving a multimedia  
message on your KX5 phone: Auto Receive  
(default) and Prompt.  
Note: You may add only one new or stored  
sound per multimedia message sent.  
Record Sound to instantly record a new sound  
and attach it to your message.  
Auto receive mode  
When a multimedia message is received, it is  
automatically downloaded onto your phone.  
Media Gallery to display a list of categories  
that contain saved or downloaded sounds and  
voice memos.  
The alert “New Message(s)” appears along with  
the text “Message Received. View now?”  
Highlight Saved Sounds.  
Press to select Open.  
Highlight a sound to add to the multimedia  
message. Press to choose Select.  
To View the multimedia message, press  
To view Later, press  
.
.
Note: If a multimedia message is received during  
a call, then the phone downloads the message  
approximately one minute after the last key  
is pressed.  
9. Before sending your message, press  
to  
select additional Options. Choose:  
Preview Message plays your multimedia  
message prior to sending.  
Prompt mode  
Save Message allows you to save your  
multimedia message to the Drafts Folder  
and send it later.  
When a multimedia message is received, your  
screen displays the alert “New Message(s)” along  
with the question “Retrieve Now?”  
Add Address allows you to add additional  
addresses to your multimedia message  
prior to sending it.  
To View the multimedia message, press  
.
Select Erase to never download the  
multimedia message.  
Message Priority allows you to send  
your multimedia message with Normal or  
Urgent priority.  
To view Later, press  
.
Note: If a multimedia message is received during  
a call, then the phone screen displays the alert  
“New Message(s)” after the call ends.  
10. Press  
to select Send. This will send your  
multimedia message.  
54  
Sending and Receiving Multimedia Messages  
To activate Prompt mode:  
Lock Msg to avoid accidentally erasing it.  
1. Select Menu Messages Msg Settings.  
Message Info displays multimedia  
message information (priority, sender,  
subject, time sent and received, and  
message size).  
2. Press  
up or down to scroll through the  
list.  
3. Highlight Auto Retrieve and press  
4. Press up or down through the list and  
highlight Disabled. Press  
.
Play Video plays the video in the  
multimedia message.  
.
Replay plays the multimedia message  
again from the beginning.  
Viewing multimedia messages  
When you receive a multimedia message, a  
appears on your phone’s screen and remains until  
all messages are viewed. The message is stored in  
the InBox until the full message has been received,  
regardless of the auto receive or prompt setting.  
Done exits the multimedia message.  
Call initiates call to sender of  
multimedia message.  
Save Picture saves the currently  
viewed picture embedded in the  
multimedia message.  
1. Press  
the message is long, press  
the entire multimedia message.  
2. Press to select Options. Press  
to View the multimedia message. If  
down to view  
Save Video saves the video embedded in  
the multimedia message.  
down  
Save Sound saves the current sound  
embedded in the multimedia message.  
to highlight additional options for the multimedia  
message (options vary according to selection):  
Save Address extracts email addresses,  
phone numbers, and/or URLs from the  
sender info and multimedia message body.  
Note: The options available to you may vary.  
Check with your service provider.  
Mute to silence the message.  
Save as QuickText saves the text in the  
multimedia message to the QuickText list.  
Erase Msg allows you to delete the  
currently displayed multimedia message.  
Save Message saves the multimedia  
Forward launches the message creation  
screen, allowing you to forward the  
multimedia message. The original address  
will not be shown, nor will the graphic,  
sound, and text fields.  
message to the Saved Folder on the phone.  
3. When you are finished viewing the multimedia  
message, select Reply or press  
.
User Guide for the Kyocera Slider Remix KX5 Phone  
55  
11 USING TOOLS AND GAMES  
Naming a saved voice memo  
Voice Memo  
The Voice Memo tool allows you to record and  
play back audio memos.  
1. Select Menu Tools & Games →  
Voice Memo Recorded Memos.  
2. Highlight the memo and select Options.  
Recording a voice memo  
3. Select Rename.  
1. Select Menu Tools & Games →  
Voice Memo Record New.  
-or-  
4. Press and hold  
to clear the default  
name.  
5. Use the keypad to enter a name for the memo.  
Press and hold  
right.  
6. Select Save.  
2. Say your memo and press to  
select Stop.  
3. Select Save to save your memo.  
Erasing a saved voice memo  
Note: If an incoming call is received while you’re  
recording a memo, the memo is saved and the  
incoming call screen appears.  
1. Select Menu Tools & Games →  
Voice Memo Recorded Memos.  
2. Highlight the memo and select Options.  
3. Select Erase. The prompt “Erase file?”  
Playing or reviewing a voice memo  
appears.  
1. Select Menu Tools & Games →  
4. Select Yes or No.  
Voice Memo Recorded Memos.  
2. Highlight the voice memo to review and select  
Scheduler  
The Scheduler allows you to schedule events and  
set reminder alerts.  
Play.  
3. Press  
and press  
right and left to select a function  
to perform it:  
Play  
Creating an event  
1. Select Menu Tools & Games →  
Stop  
Pause  
Scheduler Add New Event.  
2. Enter a name for the event and press  
down. For help entering text, see page 16.  
56  
Using Tools and Games  
3. Select Options and classify the type of event  
and press : Meeting, Phone Call, Birthday,  
Anniversary, Vacation, Medical, or Other.  
10. Press  
recurring event.  
Select an option and press  
Weekly, Monthly, or Annually.  
to select whether or not this is a  
: No, Daily,  
4. Press  
to change the date of the event (the  
current date is the default date of the event).  
11. Select Save.  
Press  
the month, day, and year fields.  
Press up or down to change the  
month, day, or year.  
Press to save your changes.  
left or right to move between  
Editing, erasing, or sending an event  
1. SelectMenuTools&GamesScheduler→  
View Month.  
2. Press  
up, down, left or right to highlight  
the day with the event to view, edit, or erase.  
5. Press  
to set the time of the event.  
3. Press  
and press  
4. Press  
up or down to highlight the event  
.
Press  
left or right to move between  
the hour, minute, and AM/PM fields.  
to select Options.  
Press  
minute, or AM/PM.  
Press to save your changes.  
up or down to change the hour,  
5. Select Edit, Erase, or Send and press  
.
For more information about editing the  
event, see “Scheduler” on page 56.  
6. Press  
to set the duration of the event.  
To erase the event, highlight Erase and  
Press left or right to move between  
press  
. Press  
to confirm.  
the hour and minute fields.  
Press up or down to change the hour  
and minute.  
Press to save your changes.  
For more information about sending the  
event, see “Sending and Receiving Text  
Messages” on page 46.  
7. Press  
to set a reminder of the event.  
Alarm Clock  
You can set up to four alerts with your phone’s  
three alarm clocks and one quick alarm.  
Select an option and press  
.
8. Press  
to set the reminder sound.  
Select an option and press  
.
Note: The alert occurs only if the phone is on.  
9. Press  
to select a Silent Mode setting  
Select No or During Event and press  
.
User Guide for the Kyocera Slider Remix KX5 Phone  
57  
4. When the alarm rings, select Off to turn off the  
Setting an alarm clock  
alarm or Reset to set the QuickAlarm again.  
1. SelectMenuTools&GamesAlarmClock.  
2. Highlight one of the alarms and select Set.  
Tip Calculator  
The Tip Calculator helps you calculate how much  
tip to include with a bill.  
3. Use the phone keypad to enter numbers and  
to switch between AM and PM.  
Press  
hours, minutes, and AM/PM fields.  
Press up or down to change the  
hours, minutes, and AM/PM options.  
4. Press to set the time of the alarm.  
5. Select Options to set the alarm sound.  
6. Highlight an option and press  
7. Select Options to set the recurring time.  
8. Highlight an option and press  
9. Enter a note for the alarm and press  
10. Press to select Save and set the alarm(s).  
left or right to move between  
1. Select Menu Tools & Games →  
Tip Calculator.  
2. Enter the amount of your bill.  
3. Select Next.  
4. Select the amount you want to include as a tip  
(10%, 15%, 18%, 20%, Other) and press  
. Your total bill appears, including tip.  
.
5. To split the bill, press  
to select Split.  
.
6. Press to clear the default of 2 guests.  
.
7. Enter the number of guests and press  
select Next. The amount each guest pays is  
calculated.  
to  
11. When the alarm rings, select Off to turn off the  
alarm or Snooze to silence the alarm for  
10 minutes.  
8. Select Done.  
Note: Opening the flip turns off the alarm.  
Calculator  
Use the calculator for basic mathematical  
equations.  
Setting the QuickAlarm  
1. SelectMenuTools&GamesAlarmClock.  
2. Highlight QuickAlarm and select Set.  
1. Select Menu Tools & Games Calculator.  
2. Use the keypad to enter numbers.  
3. Select an option and press  
: 5 minutes, 15  
3. Use  
to select mathematical operations:  
+ (add)  
minutes (default), 30 minutes, or 60 minutes.  
A message appears telling you the QuickAlarm  
is On.  
Left x (multiply) Up  
Right ÷ (divide)  
Down - (subtract)  
58  
Using Tools and Games  
4. Press  
to calculate the result.  
Stopwatch  
1. Select Menu Tools & Games Stopwatch.  
2. Select Start to begin counting.  
Select Stop to stop counting.  
Example: Enter 5, press  
enter 2, then press  
10.  
left to select X,  
to obtain the result of  
5. Press  
- or -  
to return to the home screen.  
to clear the screen.  
Select Reset to clear the counter.  
Press  
Games  
The games in this section may not be available  
on your phone. Check with your service provider  
for availability.  
Options  
Adds displayed digit to the value stored  
in memory.  
M+  
If you receive an incoming call alert while you are  
playing a game, the game is paused and exited.  
You can return to play once the call alert ends.  
Games do not remain paused if the phone is  
turned off or loses power.  
Displays currently stored value on  
screen.  
MR  
MC  
Clears value currently stored in memory.  
Timer  
Brick Attack  
This timer counts down for a specified amount of  
time. It beeps when that amount of time has  
elapsed.  
The goal of this game is to eliminate bricks  
arranged in levels. You send a moving ball  
upward using a paddle at the bottom of  
the screen.  
1. Select Menu Tools & Games Timer.  
2. Select Set.  
1. SelectMenu Tools&GamesBrickAttack.  
Press  
Press  
to move the cursor left or right.  
up or down to set the hours,  
2. Press  
to select Yes at the prompt, “Turn  
off backlight to conserve battery?”  
minutes, and seconds.  
3. Press  
to select New.  
3. Select Start to begin the countdown.  
Select Stop to pause the countdown.  
Select Reset to clear the timer.  
To pause the game, press  
press to Resume.  
To move the paddle, press  
, then  
left or right.  
4. Select Sound to set the alarm sound and press  
.
To exit the game, highlight Exit and  
press  
.
5. Press  
or  
to silence the alarm.  
User Guide for the Kyocera Slider Remix KX5 Phone  
59  
5. Press  
to select  
to get your score  
Race 21  
and advance to the next round.  
This game is a timed variation of Black Jack. Each  
game comprises three 90-second rounds. To score  
points, add cards in each of the four columns,  
trying to reach but not exceed 21 in each column  
within during the course of the game.  
6. Select an option and press  
to select it.  
New Game initiates game play. To pause  
the game, press . From here you  
can choose Resume, New or Quit.  
1. Select Menu Tools & Games Race 21.  
Resume Game returns you to the game  
you were last playing.  
2. Press  
to select Yes at the prompt, “Turn  
off backlight to conserve battery?”  
Scoreboard provides you with the top  
five scores.  
3. Select New Game. The first card to be placed  
is shown at the top left of the screen. Press a  
key to add a card to the row as follows:  
Music plays music with this game. Select  
from Music Always, Sound Effects,  
Instructions, Credits, During Title, or No  
Music.  
Add cards to the first row  
Add cards to the second row  
Add cards to the third row  
Add cards to the fourth row  
7. Press  
to end all games.  
Shortcut: Press  
left or right to choose  
arrows at the bottom of the screen then press  
to add cards to corresponding rows.  
Note: Each time you place a card, a new card  
appears for placement.  
4. Continue placing cards until you are satisfied  
with your selections.  
You can pause or end the game at any time  
by pressing  
.
You lose points each time you exceed 21  
in a column.  
Select Skip to skip one card per round.  
60  
Using Tools and Games  
12 USING VOICE RECOGNITION  
Voice recognition allows you to make and  
answer calls by speaking commands into the  
phone’s microphone.  
3. Highlight the phone number and select  
Options.  
4. Select Add Voice Dial, Edit Voice Dial, or  
Erase Voice Dial.  
Note: You cannot use voice recognition to end a  
call; you must press  
when the slide is open.  
5. Follow the prompts.  
Setting up voice dialing  
To make or receive calls using voice dialing,  
Making a call using voice tags  
1. If you haven’t already done so, record a voice  
contacts must be saved with associated voice tags.  
tag for the person you wish to call.  
2. With the slide open, from the home screen,  
Creating a voice tag for a contact  
press  
. The phone responds:  
1. Press  
to select Contacts.  
“Say a name.”  
2. Highlight the contact and press  
.
3. Say the name of the person you want to call.  
3. Press  
down to highlight the number.  
4. If the name you said matches a contact in the  
Voice Dial List, the phone responds: “Calling  
(Name).” Remain silent to make the call, or  
say No to cancel.  
4. Press  
to select Options.  
5. Highlight Add Voice Dial and press  
.
6. Follow the voice prompts. You will need to say  
Note: If the phone finds multiple voice tags  
that sound like the name you said, you will be  
asked to verify which name you want to call.  
Say Yes when you hear the correct name. Say  
No when you hear an incorrect name.  
the name twice.  
Viewing entries with voice tags  
Select Menu Contacts Voice Dial List.  
A list of all contacts with assigned voice  
tags appears.  
5. When you are finished with the call,  
press  
if the slide is open.  
Editing a voice tag  
1. Select Menu Contacts Voice Dial List.  
2. Highlight the contact to edit, and press  
.
User Guide for the Kyocera Slider Remix KX5 Phone  
61  
Say “Verify” to cause phone to repeat the  
set of digits that you input.  
Erasing voice tags  
To erase all voice name dial recordings in  
your phone:  
Say “Cancel” to exit voice recognizer and  
return to the home screen.  
1. Menu Settings Voice Features →  
Speak a digit to enter the next digit. Once  
the phone repeats the digit, you can speak  
the next digit or pause to hear the prompt.  
Erase Voice Dial.  
2. Select Yes.  
Making a call using digit dialing  
When using digit dialing, you speak digits to dial a  
phone number.  
Using voice features with  
hands-free car kits  
You can use voice commands to make a phone  
call or to answer the phone only if your phone is  
connected to a professionally installed Kyocera  
hands-free car kit (sold separately).  
Note: You cannot speak a string of digits. You  
must speak one digit at a time and wait for the  
prompt.  
1. From the home screen, press  
. The phone  
Note: The following features apply only to  
installed hands-free car kits unless noted.  
responds: “Say a name or say Dial.”  
2. Say “Dial”. The phone responds: “Speak a  
To shop for hands-free car kits, visit  
800-349-4188 (U.S.A. only) or 858-882-1410.  
digit.”  
3. Speak the first digit of the phone number you  
want to call. Once the phone repeats the digit,  
you can speak the next digit.  
Waking up the phone  
If you pause, the phone will prompt you with  
the following five options. After the prompt,  
speak an option.  
If your phone is connected to a Kyocera installed  
hands-free car kit, you can use the voice  
command to activate the phone to make a phone  
call.  
Say “Clear” to erase the last digit entered.  
The phone responds: “Digit cleared.”  
To clear the entire phone number, say  
Clear” again. When the phone prompts  
you with “Clear entire phone number?”,  
say “Yes” to clear or “No” to cancel.  
Note: Voice Wake-up does not work with  
Keyguard active.  
Say “Call” to dial the number.  
62  
Using Voice Recognition  
To activate the Voice Wake-up setting:  
To activate the Voice Answer setting:  
1. Select Menu Settings Voice Features →  
1. Select Menu Settings Voice Features →  
Voice Wake-Up With accessory.  
Voice Answer.  
2. Select Menu Settings Keyguard →  
2. Highlight Enabled and press  
.
Disabled, then press  
.
3. Select Menu Settings Silent Mode →  
To wake up the phone:  
Normal Sounds, then press  
.
1. Say “Wake Up” and listen for a tone.  
To answer a call:  
2. Say “Wake Up” again until you hear two tones.  
When you receive an incoming call, the phone  
responds: “Incoming call, answer?” or “Incoming  
roam call, answer?” If the caller is recognized as a  
contact entry in your phone, then the phone will  
say “Incoming call from (Name), answer?”  
If the phone does not recognize your  
“Wake up” command, see “Training voice  
recognition” on page 64.  
Answering the phone  
Say “Yes” or press any key except  
.
You can set your hands-free car kit to (1) answer  
automatically or (2) answer using a voice  
command.  
Ignoring an incoming call  
To ignore an incoming call, do one of the  
following:  
Answering automatically  
Say “No” and press  
to silence the alert.  
You can set your phone to answer automatically.  
Remain silent. The voice alert repeats twice  
and the phone rings once, then returns to the  
home screen.  
Note: This setting also works with the portable  
hands-free car kit.  
Select Menu Settings Accessories →  
Auto-Answer After 5 secs.  
Answering using voice commands  
If Auto-Answer is turned off, you can use a voice  
command to answer an incoming call using the  
installed hands-free car kit.  
Select Menu Settings Accessories →  
Auto-Answer Disabled.  
User Guide for the Kyocera Slider Remix KX5 Phone  
63  
Training voice recognition  
If your phone is having trouble recognizing your  
voice, you can train it with the commands Yes,  
No, and Wake up.  
1. Select Menu Settings Voice Features.  
2. Select Voice Training.  
3. Read the message and press  
to select OK  
and continue. Cancel returns you to the  
previous screen.  
4. Select Train All or the item you want to train.  
5. Follow the prompts for each word until  
training is complete.  
64  
Using Voice Recognition  
13 CONNECTING TO THE INTERNET  
An underline and an arrow indicate that  
Using the Web Browser  
there is more text. Press  
more text. Press  
down to view  
to return to the  
You can use your phone to browse the Internet if  
you have obtained phone Internet services from  
your service provider and if over-the-air Internet  
access is available in your area.  
previous screen.  
To choose a site, highlight it and press  
to select Go.  
Note: You cannot receive incoming calls while  
you are using Web Browser.  
4. When you have finished using the Internet,  
press to exit the Web Browser.  
Launching the Web Browser  
1. Select Menu Web Browser.  
Using the Web menu options  
The following options may appear on your screen:  
A message about airtime fees appears every  
time you start the browser.  
Home returns you to the main Web Browser  
window, or home page.  
For more information about how airtime is  
charged, contact your service provider.  
Mark Site saves the current location as a  
bookmark for easy access.  
2. Press  
to continue.  
Bookmarks displays a list of your saved  
Web sites.  
If this is the first time you have connected to  
the Internet, a message informs you that  
security is not yet enabled for your Web  
Browser.  
Setup gives you options for changing how  
information is displayed.  
Show URL displays the entire URL.  
3. Press  
to select Yes to enable security.  
About Openwave displays information  
When you are connected, a browser home  
page appears. It has a list of bookmarks and  
some Web menu options at the bottom of the  
screen.  
about your Web Browser version.  
Encryption should not be used unless you  
are instructed to do so by your service  
provider.  
A
appears in a secure session.  
User Guide for the Kyocera Slider Remix KX5 Phone  
65  
UP.Link selects a different browser server.  
You can use this option if you have more  
than one Web Browser account.  
Restart restarts the Web Browser.  
Searching for a Web site  
How you search for a Web site depends on  
your service provider. For more information,  
contact your service provider.  
Going to a bookmarked site  
1. Select Menu Web Browser. If you see a  
message prompt, press  
to continue.  
2. From your Web home page, select  
Bookmarks. A list of bookmarks appears.  
3. Enter the number corresponding to the  
bookmark you want and press  
.
Checking Net alerts  
Alerts received from a Web site are sent to your  
Browser Alerts inbox.  
1. Select Menu Messages Browser Alerts.  
This action launches the browser inbox.  
2. Press  
to accept browser fees.  
3. Select an alert and follow the prompts.  
66  
Connecting to the Internet  
14 GETTING HELP  
India:  
Toll free#: 1-600-121214  
Toll#: 0124-284-5000  
Customer support  
Your service provider’s customer support  
Mexico:  
001-866-650-5103  
department may be accessible directly from your  
phone when you dial a number, such as *611  
(check with your service provider). They can  
answer questions about your phone, phone bill,  
call coverage area, and specific features available  
to you, such as call forwarding or voicemail.  
New Zealand: 0-800-990-100  
Panama:  
Peru:  
001-800-201-1984  
0-800-51-934  
Puerto Rico:  
Venezuela:  
1-866-664-6443  
0-800-100-2640  
For questions about the phone features, refer to  
the materials provided with your phone, or visit  
Before requesting support, please try to  
reproduce and isolate the problem. When you  
contact the Customer Care Center, be ready to  
provide the following information:  
For additional questions, you may contact the  
Kyocera Wireless Corp. Customer Care Center in  
any of the following ways:  
The name of your service provider.  
The actual error message or problem you  
are experiencing.  
The steps you took to reproduce the problem.  
The phone’s electronic serial number (ESN).  
Phone: 1-800-349-4478 (U.S. and Canada)  
or 1-858-882-1401.  
To locate the ESN select Menu Phone  
Info and scroll down to ESN: for the  
11-digit number.  
Customer support phone numbers are also  
available in the following countries:  
Argentina:  
Australia:  
Brazil:  
0-800-666-0052  
1-800-507-000  
0-800-55-2362  
800-43-1212  
Qualified service  
If the problem with your phone persists, return  
the phone with all accessories and packaging to  
the dealer for qualified service.  
Chile:  
Colombia:  
01-800-700-1546  
User Guide for the Kyocera Slider Remix KX5 Phone  
67  
Phone accessories  
To shop for KX5 phone accessories, visit  
call us at 800-349-4188 (U.S.A. only) or  
858-882-1410.  
Become a product evaluator  
To participate in the testing and evaluation of  
Kyocera Wireless Corp. products, including  
cellular or PCS phones, visit beta.kyocera-  
wireless.com.  
68  
Getting Help  
INDEX  
Numerics  
1-Touch dialing, 12  
countdown timer, 59  
custom menu  
hard pause, 19  
I
creating, 40  
A
icons, 8  
Alarm Clock, 8  
alarm clock, 57  
alerts  
for messages, 39  
for missed calls, 11  
analog mode, 8  
auto-hyphenation, 41  
D
contacts, 20  
messages, 49  
InBox, 50  
data/fax setup, 14, 44  
digital mode, 8  
display contrast, 41  
L
E
language, 40  
lights  
emergency  
calls, 13  
lights-only mode, 8, 37  
B
emergency mode, 13  
exit emergency mode, 14  
position location, 8, 45  
erasing  
limiting calls out, 43  
lock code, 42  
locking  
banner, 40  
battery, 1  
blocking outgoing calls, 43  
Brick Attack, 59  
phone, 42  
contact entries, 21, 43  
phone numbers, 21  
text messages, 50  
M
memory  
C
calculator, 58  
call counters, 14  
callback number, 47  
calls  
saving, 50  
memory card, 28  
menu view, 40  
Music Player, 2, 28  
F
fast find, 22  
fax mode, 44  
finding contact information, 22  
frequent contacts, 22  
answering, 9  
N
missed, 11  
number mode, 16  
redialing, 10  
G
games  
O
camera  
OutBox, 49  
menu options, 24  
recording video, 26  
sending a picture, 24  
setting up, 25  
taking a picture, 25  
color themes, 42  
Com Port speed, 44  
contacts directory, 19  
contrast, 41  
Brick Attack, 59  
Race 21, 60  
P
phone numbers  
erasing, 21  
H
hands-free car kit  
answering using voice, 63  
purchasing, 68  
hands-free headset  
purchasing, 68  
verifying your own, 7  
phone, unlocking, 42  
position location, 8, 45  
power save mode, 9  
User Guide for the Kyocera Slider Remix KX5 Phone  
69  
Q
text messages, 46  
time format, 42  
timer, 59  
QuickAlarm, 58  
QuickText, 47, 52  
timing calls, 14  
tip calculator, 58  
TTY/TDD, 44  
R
Race 21, 60  
recent call icons, 11  
resetting the phone, iv  
ringers  
U
unlocking the phone, 42  
choosing types, 37  
for contacts, 19  
for roaming calls, 15  
silencing, 7  
V
vCard, 21  
vibrate, 8, 37  
Voice Answer, 63  
voice dialing, 61  
voice memo  
erasing, 56  
naming, 56  
recording, 56  
voicemail, 13  
setting up, 7  
volume  
volume, 38  
roaming, 8  
alerts, 15  
controlling, 14  
ringer, 15  
S
scheduler, 56  
screen contrast, 41  
screen icons, 8, 16, 37, 49  
screen savers, 41  
secret contacts, 12, 21  
security, 42  
earpiece, 10, 38  
key beep, 39  
ringer, 38  
W
sent messages, 48  
silent mode, 8, 37  
smart sound, 38  
smiley mode, 17  
songs, 28  
wallpaper, 42  
Web Browser, 65  
speed dialing, 21  
stopwatch, 59  
symbol mode, 17  
T
technical support, 67  
text entry, 16  
quick reference, 18  
70  

Kenwood DP M5520 User Manual
Jwin JX M59 User Manual
IBM 22P6969 User Manual
Hitachi Deskstar 180GXP User Manual
Grindmaster ICB 300 User Manual
Dualit Coffeemaker DCM2 User Manual
Cecilware JAVA 2 QB D1 User Manual
Bodum 10617 User Manual
Audiovox CDM 8930 User Manual
Antec 4U User Manual