Kyocera K122 User Manual

The exposure standard for wireless mobile devices  
employs a unit of measurement known as the  
Specific Absorption Rate, or SAR. The SAR limit  
set by Anatel is 2.0 W/kg.*  
Additional information on SAR values can be found  
on the web site of CTIA (Cellular  
Telecommunications and Internet Association), at  
Tests for SAR are conducted using standard  
operating positions specified by the standards of  
Anatel, with the phone transmitting at its highest  
certified power level, in all frequency bands.  
Although the SAR is determined at the highest  
certified power level, the actual SAR level of the  
phone while operating may be well below the  
maximum value. This is because the phone is  
designed to operate at multiple power levels, so as  
to use only the power required to reach the  
* In the United States and Canada, the SAR  
limit for mobile phones used by the public is  
1.6 watts/kg (W/kg) averaged over one gram of  
tissue. The standard incorporates a substantial  
margin of safety to give additional protection to  
the public, and to account for any variation  
in measurement.  
Caution  
The user is cautioned that changes or  
modifications not expressly approved by the party  
responsible for compliance could void the warranty  
and user’s authority to operate the equipment.  
network. In general, the closer the telephone is to a  
radio base station, the lower the power transmitted.  
Before a phone model is available for sale to the  
public, it must be tested, approved, and certified by  
Anatel that it does not exceed the limit of the  
government requirements related to safety in the  
event of exposure to interference.  
Optimize your phone’s performance  
Use the guidelines on <Blue>page 1 to learn how  
to optimize the performance and life of your phone  
and battery.  
The tests are conducted in positions and locations  
(e.g., at the ear and used next to the body)  
specified by Anatel for each model. The highest  
values of the SAR for this phone model are  
described below in accordance with the technical  
certificate of compliance.  
Air bags  
If you have an air bag, DO NOT place installed or  
portable phone equipment or other objects over the  
air bag or in the air bag deployment area. If  
equipment is not properly installed, you and your  
passengers risk serious injury.  
While there may be differences between the SAR  
levels of various phones and at various positions,  
they all meet the government requirements with  
regard to safe exposure.  
Anatel has granted an equipment authorization for  
this model phone with all reported SAR levels  
evaluated as in compliance with the radio  
frequency emission guidelines of Anatel.  
Medical devices  
Pacemakers—Warning to pacemaker wearers:  
Wireless phones, when in the ‘on’ position, have  
been shown to interfere with pacemakers. The  
phone should be kept at least six (6) inches away  
from the pacemaker to reduce risk.  
The Health Industry Manufacturers Association  
and the wireless technology research community  
recommend that you follow these guidelines to  
minimize the potential for interference.  
SAR information on this model phone is on file with  
Anatel and can be found at its web site.  
Always keep the phone at least six inches  
(15 centimeters) away from your pacemaker  
when the phone is turned on.  
Do not carry your phone near your heart.  
User Guide for the Kyocera K122 Phone  
iii  
Use the ear opposite the pacemaker.  
If you have any reason to suspect that  
interference is taking place, turn off your  
phone immediately.  
transfer or storage facilities for fuel or  
chemicals  
vehicles using liquefied petroleum gas, such as  
propane or butane  
areas where the air contains chemicals or  
particles such as grain, dust, or metal powders  
any other area where you would normally be  
advised to turn off your vehicle engine  
Hearing aids—Some digital wireless phones may  
interfere with hearing aids. In the event of such  
interference, you may want to consult your service  
provider or call the customer service line to  
discuss alternatives.  
Other medical devices—If you use any other personal  
medical device, consult the manufacturer of the  
device to determine if it is adequately shielded  
from external RF energy. Your physician may be  
able to help you obtain this information.  
Use with care  
Use only in normal position (to ear). Avoid  
dropping, hitting, bending, or sitting on the phone.  
Keep phone dry  
If the phone gets wet, turn the power off  
immediately and contact your dealer. Water  
damage may not be covered under warranty.  
In health care facilities—Turn your phone off in health  
care facilities when instructed. Hospitals and  
health care facilities may be using equipment that  
is sensitive to external RF energy.  
Resetting the phone  
If the screen seems frozen and the keypad does  
not respond to keypresses, reset the phone by  
completing the following steps:  
Potentially unsafe areas  
Posted facilities—Turn your phone off in any facility  
when posted notices require you to do so.  
1
2
Remove the battery door.  
Remove and replace the battery.  
Vehicles—RF signals may affect improperly installed  
or inadequately shielded electronic systems in  
motor vehicles. Check with the manufacturer of the  
device to determine if it is adequately shielded  
from external RF energy.  
Blasting areas—Turn off your phone where blasting is  
in progress. Observe restrictions, and follow any  
regulations or rules.  
Potentially explosive atmospheres—Turn off your phone  
when you are in any area with a potentially  
explosive atmosphere. Obey all signs and  
instructions. Sparks in such areas could cause an  
explosion or fire, resulting in bodily injury or death.  
If the problem persists, return the phone to the  
dealer for service.  
Accessories  
Use only Kyocera-approved accessories with  
Kyocera phones. Use of any unauthorized  
accessories may be dangerous and will invalidate  
the phone warranty if said accessories cause  
damage or a defect to the phone.  
To shop online for phone accessories, visit  
To order by phone, call 800-349-4188 (U.S.A. only)  
or 858-882-1410.  
Areas with a potentially explosive atmosphere are  
often, but not always, clearly marked.  
They include:  
Radio Frequency (RF) energy  
Your telephone is a radio transmitter and receiver.  
When it is on, it receives and sends out RF energy.  
Your service provider’s network controls the power  
of the RF signal. This power level can range from  
0.006 to 0.6 watts.  
fueling areas such as gas stations  
below deck on boats  
iv  
Customer support phone numbers are also  
available in the following countries.  
Battery and charger specifications  
Charger  
Input  
Output  
CE90-R2233-01  
CE90-R2234-01  
CV90-K0285-01  
Standard Battery:  
100-240VAC 50/60Hz 5VDC 350mA  
100-240VAC 50/60Hz 5VDC 350mA  
100-240VAC 50/60Hz 4.2VDC 600mA  
Argentina:  
Brazil:  
0-800-666-0052  
0-800-55-2362  
800-43-1212  
Chile:  
Colombia:  
Mexico:  
Peru:  
01-800-700-1546  
001-866-650-5103  
0-800-51-934  
CV90-N3344-01, 3.7 V / 900 mAh  
CV90-N3344-04, 3.7 V / 900 mAh  
Customer support  
Your service provider’s customer support  
department may be accessible directly from your  
phone when you dial a number such as *611. They  
can answer questions about your phone, phone bill,  
call coverage area, and specific features available  
to you, such as call forwarding or voicemail.  
For questions about the phone features, refer to  
the materials provided with your phone, or visit  
For additional questions, you may contact the  
Kyocera Wireless Corp. Customer Care Center in  
one of the following ways:  
Puerto Rico: 1-866-664-6443  
Venezuela: 0-800-100-2640  
Before requesting support, please try to reproduce  
and isolate the problem. When you contact the  
Customer Care Center, be ready to provide the  
following information:  
The name of your service provider.  
The actual error message or problem you are  
experiencing.  
The steps you took to reproduce the problem.  
The phone’s electronic serial number (ESN).  
To find the ESN select Menu Phone Info.  
Telephone: 1-858-882-1401.  
Qualified service  
If the problem with your phone persists, return the  
phone with all accessories and packaging to the  
dealer for qualified service.  
Become a product evaluator  
To participate in the testing and evaluation of  
Kyocera Wireless Corp. products, including cellular  
or PCS phones, visit beta.kyocera-wireless.com.  
User Guide for the Kyocera K122 Phone  
v
Kyocera Wireless Corp.  
10300 Campus Point Drive, San Diego, CA 92121  
U.S.A.  
To purchase accessories, visit  
vi  
CONTENTS  
Network settings . . . . . . . . . . . . . . . . . . . . . . . . 29  
1
Getting Started. . . . . . . . . . . . . . . . . . . . . 1  
Installing the battery . . . . . . . . . . . . . . . . . . . . . .1  
Getting to know your phone . . . . . . . . . . . . . . . .3  
Using menus . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Performing basic functions . . . . . . . . . . . . . . . . .5  
7
8
Fun & Games . . . . . . . . . . . . . . . . . . . . . 31  
Brick Attack . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
My Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Saving memory . . . . . . . . . . . . . . . . . . . . . . . . . 31  
2
Making and Answering Calls . . . . . . . . . 6  
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Viewing recent calls . . . . . . . . . . . . . . . . . . . . . .7  
Speed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Setting up voicemail . . . . . . . . . . . . . . . . . . . . . .8  
Silencing an incoming call . . . . . . . . . . . . . . . . .9  
Calling emergency services . . . . . . . . . . . . . . . . .9  
Locking the keypad . . . . . . . . . . . . . . . . . . . . . .10  
Controlling network roaming . . . . . . . . . . . . . .10  
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
9
Getting Help . . . . . . . . . . . . . . . . . . . . . . 35  
Customer support . . . . . . . . . . . . . . . . . . . . . . . 35  
3
4
Entering Text, Numbers,  
and Symbols . . . . . . . . . . . . . . . . . . . . . 12  
Storing Contacts . . . . . . . . . . . . . . . . . . 15  
Creating a new contact . . . . . . . . . . . . . . . . . . .15  
Editing or erasing a contact . . . . . . . . . . . . . . . .16  
Editing a phone number . . . . . . . . . . . . . . . . . .16  
Finding contact information . . . . . . . . . . . . . . .16  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
5
6
Sending and Receiving  
Text Messages . . . . . . . . . . . . . . . . . . . . 18  
Sending text messages . . . . . . . . . . . . . . . . . . . .18  
Retrieving text messages . . . . . . . . . . . . . . . . . .20  
Customizing message settings . . . . . . . . . . . . . .22  
Customizing Your Phone . . . . . . . . . . . 23  
Silencing all sounds . . . . . . . . . . . . . . . . . . . . .24  
Choosing ringers . . . . . . . . . . . . . . . . . . . . . . . .24  
Adjusting volume . . . . . . . . . . . . . . . . . . . . . . . .25  
Setting message alerts . . . . . . . . . . . . . . . . . . . .25  
Using shortcuts . . . . . . . . . . . . . . . . . . . . . . . . .26  
Personalizing the screen . . . . . . . . . . . . . . . . . .26  
Creating a secure environment . . . . . . . . . . . . .28  
User Guide for the Kyocera K122 Phone  
vii  
1
GETTING STARTED  
To charge the battery,  
Installing the battery  
connect the AC adapter to the  
jack on the bottom of the  
phone, then plug the adapter  
into a wall outlet.  
Your phone comes with a removable lithium ion  
(LiIon) battery.  
1. Hold the phone with  
the back facing you.  
2. Unsnap the battery  
door by using the latch  
located at the bottom  
of the battery door.  
The battery icon in the upper-right corner of the  
screen tells you whether the phone is:  
Charging (the icon is animated)  
Partially charged  
Fully charged  
3. Place the battery in the  
phone casing with the  
metal contacts toward  
the bottom of the  
phone.  
Recharging the battery  
You can safely recharge the battery at any time,  
even if it has a partial charge.  
4. Place the battery door  
tabs in the openings  
on  
Caring for the battery  
General safety guidelines  
the side of the phone.  
Do not take apart, puncture, or short-circuit  
the battery.  
5. Press the battery  
door until it snaps  
into place.  
If you have not used the battery for more than  
a month, recharge it before using your phone.  
Avoid exposing the battery to extreme  
temperatures, direct sunlight, or  
high humidity.  
Charging the battery  
You must have at least a partial charge in the  
battery to make or receive calls. Fully charge the  
battery before using the phone.  
Never dispose of any battery in or near a  
fire – it could explode.  
User Guide for the Kyocera K122 Phone  
1
Common causes of battery drain  
Understanding screen icons  
Playing games.  
Keeping backlighting on.  
Operating in digital mode when far away from  
a base station or cell site.  
These icons may appear on your phone’s  
home screen.  
The phone is operating in IS95 digital mode.  
Using accessories.  
The phone is receiving a signal. You can  
make and receive calls. Fewer bars  
indicate a weaker signal.  
Operating when no service is available, or  
service is available intermittently.  
High earpiece and ringer volume settings.  
Repeating sound, vibration or lighted alerts.  
Long conversation.  
A call is in progress.  
The phone is not receiving a signal. You  
cannot make or receive calls.  
The phone is roaming outside of its home  
service area.  
You have a voice message.  
The battery is fully charged. The more  
black bars, the greater the charge.  
The alarm clock is set.  
The phone is in privacy mode.  
The phone is at the home screen. To  
access Menu, press  
.
The phone is set to light up instead of ring.  
The phone is set to vibrate or to vibrate  
and then ring.  
Keyguard is on. The keypad is locked.  
Phone is set to Auto Answer.  
2
Getting Started  
Getting to know your phone  
Home screen.  
1
Navigation key positions cursor during text entry. Scrolls  
2
through menu lists.  
OK key selects a menu item or option.  
Send/Talk key starts or answers calls.  
3
4
5
6
Keypad for entering numbers, letters, or symbols.  
* Shift key changes the text mode in text entry and also  
activates the keypad lock.  
Back key accesses menu options, erases characters in text  
7
entry, returns to previous screen.  
End/Power key turns the phone on and off. Ends a call.  
# Space key enters a space during text entry.  
8
9
Jack for hands-free headset and data cable (sold separately)*  
10  
11  
0 Next key cycles through word choices during text entry and  
is also used for “+” dialing.  
Jack for AC adapter (included)*.  
12  
*Warning: Inserting an accessory into the incorrect jack will damage the phone.  
User Guide for the Kyocera K122 Phone  
3
Using menus  
The contents of the main menu are as follows:  
Recent Calls  
All Calls  
Incoming Calls  
Outgoing Calls  
Missed Calls  
Erase Lists  
Messages*  
New Text Msg  
Voicemail  
InBox  
OutBox  
Saved Msgs  
Drafts  
Msg Settings  
Group Lists  
Erase Msgs  
Settings  
Silent Mode  
Keyguard  
Sounds  
Display  
Security  
Call Information  
Network  
Convenience  
Msg Settings  
Accessories  
Fun & Games  
Phone Info*  
Phone Name:*  
Your Number:*  
SW Version:*  
PRL Version:*  
Factory Config:*  
ESN:*  
Technology:*  
SID:*  
Icon Key:*  
Brick AttackTM  
My Sounds  
*
Tools  
Scheduler  
Alarm Clock  
Tip Calculator  
Calculator  
World Clock  
Timer  
Contacts  
View All  
Add New  
Find Name  
Speed Dial List  
Business List  
Personal List  
Information  
Stopwatch  
BREW*  
MobileShop*  
Settings*  
Help*  
* Menu names and menu order may vary by service provider.  
Accessing menu items  
Press  
to select Menu.  
* To change the way the menus appear, select  
Menu Settings Display Main Menu View,  
then select Graphic, or List and press . See  
“Choosing a menu view” on page 26 for details.  
Press  
left, right, up, or down to view  
menus and options*.  
Press  
Press  
Press  
to select a menu item.  
to back up a menu level.  
to return to the home screen.  
In this guide, an arrow tells you to select an  
option from a menu. For example, Menu →  
Settings means select Menu, then select the  
Settings option.  
4
Getting Started  
Performing basic functions  
To...  
From the home screen...  
Turn the phone on  
Press  
and wait until the phone chimes.  
Turn the phone off  
Make a call  
Press and hold  
until the phone beeps.  
Enter the number, and press  
.
End a call  
Press  
Press  
.
.
Answer a call  
Access voicemail  
Verify your phone number  
Silence the ringer on an incoming call  
Press and hold  
and follow the system prompts.  
Select Menu Phone Info.  
Press  
-or-  
, then  
to answer.  
Press  
up or down, then  
to answer.  
Access contacts list  
Silence all sounds  
Lock the keypad  
Press and hold  
Press and hold  
Press and hold  
Press and hold  
down.  
right.  
left.  
Access your shortcut  
up.  
See “Defining the feature shortcut (up)” on page 26.  
User Guide for the Kyocera K122 Phone  
5
2
MAKING AND ANSWERING CALLS  
Making a call  
1. Make sure you are in an area where a signal  
Answering calls  
When a call comes in, the phone rings and  
can be received. Look for  
home screen.  
Note: The more bars you see in this symbol,  
the stronger the signal. If there are no bars,  
move to where the signal strength is better.  
on the  
Incoming Call” appears on the screen.  
The phone number of the caller also appears if it  
is not restricted. If the number is stored in your  
Contacts directory, the contact name appears.  
To answer the call, press  
.
2. Enter the phone number.  
To silence or ignore the call  
When an incoming call is received, you can  
choose to do one of the following:  
3. Press  
.
4. Press  
to end the call.  
Press  
Press  
Press  
down to silence the ringer.  
to silence the ringer.  
Redialing a number  
To redial the last number called, received, or  
. Then press  
to answer the call.  
missed, press  
three times.  
Select Ignore Call to immediately send the  
caller to voicemail. “Missed Calls” appears on  
your screen until the caller leaves a message.  
Note that in the absence of voicemail, this  
feature drops the call.  
Calling a saved number  
If you have already saved a phone number, you  
can use the Contacts list to find it quickly.  
1. Press  
down to view all Contacts.  
Adjusting the volume during a call  
2. Scroll down the list to find the contact you  
To adjust the earpiece volume during a call,  
press up or down.  
want to call.  
3. Highlight the name and press  
to dial  
the number.  
Dealing with missed calls  
When you have missed a call, “Missed Calls”  
appears on your screen unless the caller leaves  
a voicemail.  
Note: If the contact has more than one phone  
number assigned to it, press to select the  
contact’s name, highlight the phone number you  
want to call, and press  
.
6
Making and Answering Calls  
To clear the screen, press  
To return the call, highlight Missed Calls,  
press then press  
.
Number displays the phone number of  
the call.  
.
Send Msg allows you to send a text  
message to the phone number.  
Prepend allows you to add an area code to  
the number if you plan to save the number  
as a contact.  
Setting missed call alerts  
You can set an alert to beep every five minutes  
after you have missed a call.  
Select Menu Settings Sounds →  
Missed Call Enabled.  
Save New adds the phone number to the  
Contacts list.  
-or-  
Viewing recent calls  
View Contact allows you to view the  
contact information to make changes, if  
necessary.  
Add to adds the phone number to a  
saved contact.  
Details on the last calls you made, received, and  
missed (10 each, 30 total) are stored in the  
Recent Calls list and are identified by the following  
icons:  
Erase deletes the call from the list of  
recent calls.  
Outgoing call  
Incoming call  
Conference call*  
Note: If the phone number has been classified as  
“secret,” you must enter your four-digit lock code  
to view or edit it. For information on the lock  
code, see “Changing your lock code” on page 27.  
To classify a phone number as secret, see  
“Creating a new contact” on page 15.  
Missed call  
(flashing)  
Recent call details  
1. To view details of recent call, select Menu →  
Recent Calls.  
2. Select from All Calls, Incoming Calls,  
Calling recent calls  
1. Select Menu Recent Calls.  
2. Select a list: All Calls, Incoming Calls,  
Outgoing Calls, and Missed Calls.  
3. Select a recent call and press  
.
Select from the following:  
Outgoing Calls, or Missed Calls.  
Time displays the time the call was made,  
received, or missed and its duration.  
3. Select a recent call.  
4. Highlight the number you want to call.  
5. Press  
.
User Guide for the Kyocera K122 Phone  
7
Note: You must (1) enable 1-Touch dialing  
on your phone and (2) have a speed dial  
location assigned to a contact.  
See “Enabling 1-Touch dialing,” and “Using 1-  
Touch dialing”on this page.  
Erasing recent calls  
1. Select Menu Recent Calls Erase Lists.  
2. Select an option: Incoming Calls, Outgoing  
Calls, Missed Calls or Erase All.  
3. Press  
right and press  
to select Yes.  
Enabling 1-Touch dialing  
1. Select Menu Settings Convenience →  
1-Touch Dialing Enabled.  
Speed dialing  
Speed dialing allows you to quickly dial a stored  
phone number by entering a one- or two-digit  
speed dialing location number and pressing  
2. Press  
.
.
Using 1-Touch dialing  
To call a contact that has a speed dial location:  
Note: Before you can use speed dialing, you must  
save a phone number as a contact and assign a  
speed dial location to it.  
From the home screen, press and hold the  
speed dialing number. If it is a two-digit  
number, press the first digit briefly, then press  
and hold the second digit. For example, if the  
speed dialing location is 15, press  
Refer to “Creating a new contact” on page 15 to  
create a new contact, or “Editing or erasing a  
contact” on page 16 to add speed dial to an  
existing contact.  
briefly, then press and hold  
.
Using speed dialing  
To call a contact that has a speed dial location:  
Setting up voicemail  
Before your phone can receive voicemail  
messages, you must set up a password and record  
a personal greeting with your service provider.  
When you have set up your voicemail, all  
unanswered calls to your phone are automatically  
transferred to voicemail, even if your phone is in  
use or turned off.  
From the home screen, enter the one- or two-  
digit speed dialing location and press  
.
1-Touch dialing  
1-Touch dialing is the fastest way to speed dial a  
contact that has a speed dial location.  
1. From the home screen, press and hold  
2. Press at the message.  
.
8
Making and Answering Calls  
3. Follow the system prompts to create a  
Silencing an incoming call  
password and record a greeting.  
To silence an incoming call quickly, press  
. Then press to answer the call.  
Note: If you are having trouble accessing your  
voicemail, contact your service provider.  
This action silences the current call only. The next  
call will ring as normal.  
Checking voicemail messages  
When a voice message is received, your screen  
Calling emergency services  
Note: Regardless of your 3-digit emergency code  
(911, 111, 999, 000, etc.), your phone operates  
as described below.  
displays “  
the  
1 New Voicemail(s)” along with  
symbol at the top of your screen.  
The symbol flashes if the message is urgent.  
If you see “  
1. Press  
1 New Voicemail(s)”  
to select Call, which initiates a call  
Dial your 3-digit emergency code and  
press  
.
to your voicemail number.  
You can call the code even if your phone is locked  
or your account is restricted. When you call, your  
phone enters Emergency mode. This enables the  
emergency service exclusive access to your phone  
to call you back, if necessary. To make or receive  
regular calls after dialing the code, you must exit  
this mode.  
2. Follow the prompts to retrieve the message.  
To clear the screen without checking messages:  
Press  
right and press  
to select Ignore.  
symbol  
to initiate a call to your  
If you see only the  
1. Press and hold  
voicemail number.  
To exit Emergency mode  
When you have completed the emergency call:  
2. Follow the prompts to retrieve the message.  
You can set the phone to beep or vibrate every  
five minutes to remind you that you have  
voicemail. See “Setting message alerts” on  
page 25.  
1. Press  
to select Exit.  
2. Press  
again to confirm your choice.  
Tracking calls  
You can track the number and duration of calls  
made and received on your phone.  
1. Select Menu Settings →  
Call Information Call Timers.  
User Guide for the Kyocera K122 Phone  
9
2. Select a timer:  
Locking the keypad  
Recent Calls—Tracks all calls you have  
The Keyguard locks your keypad to prevent  
accidental key presses when the phone is turned  
on and a call is not in progress. You can still  
answer or silence an incoming call.  
made and received since you last reset this  
timer. To reset this timer to zero, select  
Reset and press  
.
Home Calls—Tracks all calls you have  
made and received in your home service  
area since you last reset this timer. To  
reset this timer to zero, select Reset and  
To lock the keypad from the home screen,  
press left and hold.  
To unlock the keypad, press  
in this order.  
press  
.
Roam Calls—Tracks all calls you have  
made and received outside of your home  
service area since you last reset this timer.  
To reset this timer to zero, select Reset  
Changing the keyguard setting  
1. Select Menu Settings Keyguard.  
2. Highlight an option. You can set the phone to  
lock the keypad immediately, or automatically  
if no key is pressed after 30 seconds,  
1 minute, or 5 minutes.  
and press  
.
3. Press  
to return to the Call Information  
menu to select one of the following:  
Press  
to save.  
All Calls Timer—Tracks all calls you have  
made and received. This timer cannot  
be reset.  
Reset All Timers—Resets timers for all  
recent, home, and roam calls.  
Controlling network roaming  
Note: Roaming functions may not be available  
on your phone. Check with your service provider  
for availability.  
Timing your calls  
Setting an alert for roaming  
You can set your phone to beep 10 seconds  
You may use this setting if you want the phone to  
alert you when you roam outside of your home  
service area.  
before each minute passes when you are on a call.  
Select Menu Settings Sounds →  
Minute Alert Enabled.  
1. Select Menu Settings Network →  
Roam/Svc Alert.  
2. Select an option and press  
.
10  
Making and Answering Calls  
When no svc alerts you with three tones  
decreasing in pitch when service is lost  
and three tones increasing in pitch when  
service is acquired again.  
Roam Change alerts you with two  
decreasing tones when roaming service is  
acquired and three increasing tones when  
home area service is acquired again.  
Any Change alerts you with three  
increasing tones if there is a change in  
roaming service or three decreasing tones  
if the phone loses service.  
To accept or place a call while roaming,  
you must press  
.
Note: This functionality is disabled when the  
phone is in emergency mode.  
Turning roaming on or off  
This setting allows you to control the phone’s  
roaming feature by specifying which signals the  
phone will accept.  
1. Select Menu Settings Network →  
Roam Option.  
2. Select an option and press  
.
Automatic (recommended setting)  
accepts any system the phone  
service provides.  
No roaming prevents you from making  
or receiving calls outside of your home  
service area.  
Setting the roam ringer  
You can set a ringer to indicate when an incoming  
call will be subject to roaming charges.  
1. Select Menu Settings Sounds →  
Roam Ringer.  
2. Highlight Enabled to hear the ringer.  
Note: If your phone has more than one setting for  
Automatic, contact your service provider to  
determine which one to use.  
3. Press  
to set.  
Setting Call Guard to avoid  
roaming calls  
You can set the phone to warn you before you  
answer or place a call while roaming.  
Select Menu Settings Convenience →  
Call Guard Call prompt.  
The phone now emits a distinctive roam  
alert to indicate when you are roaming  
during calls.  
User Guide for the Kyocera K122 Phone  
11  
3
ENTERING TEXT, NUMBERS, AND SYMBOLS  
You can enter letters, numbers, and symbols in  
Contacts, text messages, and your banner.  
To enter a number while in  
mode, press and hold a number key until the  
number appears on the screen.  
or  
Understanding text entry  
screens  
Entering words letter by letter  
Use normal alpha to enter letters.  
The current text entry mode (and capitalization  
setting, when applicable) are indicated by icons.  
1. Press a key once for the first letter, twice for  
the second letter, and so on. If your phone is  
set to Spanish, accented letters are available.  
text entry  
field  
2. Wait for the cursor to move right and enter the  
next letter.  
text entry  
mode  
Entering words quickly  
When you press a series of keys using  
mode,  
Text entry modes  
There are five text entry modes:  
checks its dictionary of common words and  
guesses at the word you are trying to spell.  
1. For each letter of the word you want, press the  
Case change  
Rapid Entry  
Add Symbol  
Normal alpha  
Numbers only  
key once. For example, to enter the word  
“any” press:  
2. If the word doesn’t match what you want,  
press to look at other word matches.  
.
Note: The mode you start in depends on the task  
you are doing. For example, when entering a  
phone number, you’re in number mode. When  
entering a name for a contact, you’re in normal  
text mode.  
3. When you see the word you want, press  
.
Entering symbols  
While entering text, you can enter symbols by  
pressing  
until you see the symbol you want.  
Entering numbers  
To enter a number while in  
a number key once.  
Using this method, you have access to the  
following symbols:  
mode, press  
.
@ ?  
!
-
,
&
:
1
12  
Entering Text, Numbers, and Symbols  
To access the full set of symbols:  
Capitalization settings  
1. Select  
2. Select  
3. Press  
.
Three capitalization settings are available in  
and  
modes:  
Symbols and press  
.
up or down to view the list  
Capitalize next letter  
Lower case next letter  
of symbols.  
4. Press the number key corresponding to the  
symbol you want.  
Capitalize first letter of every word (in a  
contact) or sentence (in a text message)  
Switching default text entry modes  
If no icon appears, all letters will be in lower case.  
You can change the default text entry mode when  
creating a text message. This setting applies only  
to the message body screen, not the “To” screen.  
To change capitalization settings:  
Press  
until the icon for the setting you  
1. Select Menu Messages →  
want appears.  
Msg Settings Default Text.  
2. Select Normal Alpha or Rapid Mode.  
Changing modes  
Sometimes you need to change modes. For  
example, to enter numbers in an email address  
while in  
mode, enter the numbers, and then change  
back to mode to complete the address.  
mode, you must change to  
To change text entry modes,  
you can either:  
Press and hold  
until the icon for the  
mode you want appears.  
-or-  
Highlight  
, press  
and scroll  
through the options.  
User Guide for the Kyocera K122 Phone  
13  
Quick reference to text entry  
This table gives general instructions for entering letters, numbers, and symbols.  
To...  
Do this...  
Enter a letter  
Use  
mode and press a key until you see the letter you  
want. For more information, see page 12.  
Use mode and press a key once to enter its number.  
For more options, see page 12.  
Enter a number  
Enter a symbol  
Press  
Press  
Press  
until you find the symbol you want. See page 12.  
Enter a space  
.
Erase a character  
.
Erase all characters  
Move the cursor right or left  
Change text entry modes  
Change to uppercase  
Change to lowercase  
Select options on the screen  
Press and hold  
Press up or down.  
Press and hold  
.
.
In  
mode, press  
. Choose  
. Choose  
.
In  
mode, press  
.
.
Press  
14  
Entering Text, Numbers, and Symbols  
4
STORING CONTACTS  
Use your phone’s Contacts directory to store  
information about a person or company. Your  
phone can hold, on average, about 200  
phone numbers.  
Classify Contact as Personal, Business,  
or Neither. (See page 24 to set the phone  
to ring differently for personal and  
business calls.)  
5. Select Save when done.  
Creating a new contact  
Adding a code or extension  
1. From the home screen, enter the phone  
number you want to save, including the  
area code.  
When you save the phone number of an  
automated service, you may include a pause  
where your phone would stop dialing; for  
example, where you would wait to dial  
an extension.  
Note: To create a contact without entering a  
phone number first, select Menu →  
Contacts Add New, select an option, and  
skip to step 3.  
1. Enter the first portion of the phone number.  
2. Press  
right and select a type of pause:  
2. Select Save New.  
Time Pause - Stops dialing for two  
3. Enter a name for the contact. If you need to  
seconds, then continues to dial.  
Hard Pause - Stops dialing until you  
select Release.  
learn how to enter letters, see page 12.  
4. Press  
right twice and select Options to  
add information to the contact’s number.  
3. Enter the remaining numbers.  
Assign or Unassign Ringer to identify an  
incoming call from this contact.  
Number Type to designate a number as  
Work, Home, Mobile, Pager, or Fax.  
Speed Dialing to assign a speed dial  
number to your phone number.  
Secret hides the number from view in the  
contacts list and other areas of the phone.  
Primary Number assigns phone number as  
primary number for contact.  
4. Select Save New and follow the prompts.  
Note: Both types of pause may not be available  
on your phone. Check with your service provider  
for availability.  
User Guide for the Kyocera K122 Phone  
15  
Edit Type to assign a type: work, home,  
mobile, pager, or fax. The type icon  
appears next to the phone number in the  
Contacts list.  
Erase Number to erase the number from  
the contact.  
Editing or erasing a contact  
To make changes to a contact, take these steps.  
1. Select Menu Contacts.  
2. Select View All or Find Name to find the  
contact you want to edit.  
3. Highlight the contact to edit and press  
.
Edit Number to change the phone number.  
Secret to make the number secret so that  
it will not appear on the screen until the  
lock code is entered. Secret numbers can  
be called without a lock code. (For more  
information, see “Restricting calls” on  
page 28.)  
4. Select Options.  
5. Highlight an option and press  
to select it:  
Add New, Assign Ringer, Unassign Ringer,  
Erase Contact, Edit Name, or Classify  
Contact.  
Primary Number to make this number  
the first one that shows up when you open  
the contact.  
Prepend to move the cursor to the  
beginning of the number so you can add  
the area code.  
Editing a phone number  
1. Select Menu Contacts.  
2. Select View All or Find Name to find the  
contact you want to edit.  
3. Highlight the contact to edit and press  
4. Press down to highlight the phone  
number or email address you want to edit and  
press  
5. Choose from the following options:  
.
6. Enter the new information and follow  
the prompts.  
.
7. Select Save, if necessary.  
Send Text Message to send a text message  
to that number or email address.  
View Number to see the phone number  
you selected.  
Speed Dialing to assign or remove the  
location you use to speed dial the number.  
Finding contact information  
To find a phone number or contact, you can (1)  
check the frequent contacts list, (2) search the  
Contacts directory, or (3) use Fast Find.  
16  
Storing Contacts  
Checking the Frequent List  
Using Fast Find  
Press  
down. The last 15 of your most  
To set Fast Find  
With Fast Find, you press one or two keys to view  
close matches of the number you are looking for.  
frequently called contacts appear when the  
Frequent List is enabled. Scroll past the double  
line for an alphabetical list of all contacts.  
From the home screen, select Menu →  
Settings Convenience Fast Find →  
Enabled.  
To enable the Frequent List setting  
Select Menu Settings Convenience →  
Frequent List Enabled.  
To use Fast Find  
1. From the home screen, press the keys  
corresponding to the letters of the name you  
want to find. A matching contact appears.  
Searching the Contacts directory  
Press  
down for a list of all contacts.  
To quickly get down the list, enter the first letter  
of the contact. The menu skips to that letter  
of the alphabet.  
-or-  
2. When the name you want is displayed, press  
to select View.  
3. Press  
then press  
down to select the number,  
to call.  
1. Select Menu Contacts.  
2. Select from the following:  
View All - List all contacts.  
Find Name - Locate a specific name. Enter  
part of the contact name, then select Find.  
Speed Dial List, Business List, or  
Personal List - Select a contact from a list.  
3. Scroll down until you find the name you want,  
then press  
To call the contact, highlight the number  
and press  
.
.
User Guide for the Kyocera K122 Phone  
17  
5
SENDING AND RECEIVING TEXT MESSAGES  
This chapter describes how to send, receive, and  
erase text messages from your phone. For  
information on voicemail messages, see page 8.  
-or-  
Enter a space after the first number. Then  
enter another recipient manually.  
Important: The features and menus described in  
this chapter may vary depending on services  
available in your area. In addition, usage charges  
may apply to each message. For details, check  
with your service provider.  
Note: You can send a message to up to 10  
recipients at once. The messages will be sent  
one at a time, once to each addressee.  
Note: You can not send messages to  
secret numbers.  
4. When you are done entering addresses,  
Sending text messages  
You can only send text messages to phones that  
are capable of receiving them.  
select Next.  
5. Enter the message. To learn how to enter text,  
see page 12.  
Creating a text message  
1. Select Menu Messages New Text Msg.  
2. Select an address to enter the recipient’s  
To add smileys or prewritten text, press  
right to Options and press  
Select Insert... Smileys or AutoText.  
.
6. Once you have completed the message, select  
Send to send the message immediately.  
-or-  
phone number or email address:  
Select a saved number from the Recent  
List or Contacts List, or select from the  
Group Lists you have created. For more  
about group lists, see page 22.  
Select Options and choose one of the  
following:  
Add Address—Return to the “To” screen  
to add another recipient without losing the  
message text. Enter the new address, then  
select Next to return to the message  
entry screen.  
Enter a New Address manually.  
(To learn how to enter text, see page 12.)  
3. To add another recipient to this message,  
choose a method:  
Scroll right to Options and press  
Select Recent List, Contacts, or  
Group Lists.  
.
Msg Receipt—Request a receipt that the  
recipient received the message. (This  
18  
Sending and Receiving Text Messages  
service may not be available. Check with  
your service provider.)  
1. Select Menu Messages →  
Msg Settings Signature.  
Set Priority—Label the message as  
“Urgent.”  
2. Enter your signature in the text field.  
3. Select  
to save the setting.  
Callback Number—includes a callback  
number with the message to let recipients  
know at what number they can call you  
back. Select Yes to include your own  
number or Edit to enter a different  
callback number.  
If you cannot send messages  
You may not be able to send or receive messages  
if your phone’s memory is nearly full, or if digital  
service is not available at the time. To free up  
memory, erase old messages. See “Erasing  
messages” on page 21.  
Send Later—Schedule when to send  
the message.  
Receiving incoming calls while  
creating messages  
Save Message—Save the message in  
your Drafts folder. This prevents the  
message from being deleted if you have  
activated AutoErase, and enables you to  
send the message to others.  
If you don’t wish to answer the call, select  
Ignore. The phone returns to the  
message screen.  
To answer the call, press  
. Your message  
Save AutoText—Save the message you  
have just entered as a prewritten message,  
then return to the message entry screen so  
you can send the message.  
is saved to the Drafts folder. To return to the  
message, select Menu Messages Drafts  
and select Resume.  
When you have finished setting options, press  
to return to the message window, then  
select Send to send the message.  
Viewing the OutBox  
You can check the status of messages you have  
sent as long as they have been saved to  
the OutBox.  
Adding a signature  
The signature you create does not display in the  
message creation screen; however, the signature  
is included at the end of all outgoing messages  
and is counted as characters in your messages.  
To set the OutBox  
The OutBox default is set to disabled to conserve  
memory. If you want to save your sent messages:  
Select Menu Messages →  
To create a signature:  
Msg Settings Save to OutBox.  
User Guide for the Kyocera K122 Phone  
19  
Select Enabled to save all sent messages to  
the OutBox.  
Select Prompt to alert you to choose  
whether or not to save your message.  
The message has been sent to more  
than one recipient.  
Retrieving text messages  
When a text message is received, your screen  
To view the OutBox  
1. Select Menu Messages OutBox.  
2. Press  
displays “  
the symbol at the top of your screen. The  
symbol flashes if the message is urgent.  
1 New Text Message(s)”, along with  
up or down through the list of  
messages. One of the following symbols  
appears next to each message:  
If you see “ 1 New Text Message(s)”  
You can choose to:  
The message is pending and will be sent  
when possible. You can cancel delivery  
of the message.  
View the messagePress  
.
Ignore the messagePress  
right, then  
press  
.
The scheduled message will be sent at  
the scheduled time. You cannot cancel  
delivery of the message.  
Note: If you receive a new message while you are  
reading a message, the one you are reading will  
be replaced by the new one. You can find the  
older message in the InBox:  
The message cannot be sent  
because service is not available. An  
alert appears on your phone if the  
message cannot be sent.  
Select Menu Messages InBox.  
If you see the  
symbol  
If the  
is urgent.  
symbol is flashing, the message  
The scheduled message has been sent  
and will be delivered as scheduled. You  
cannot cancel delivery of the message.  
1. Select Menu Messages InBox.  
A list of all your received messages appears.  
The message has been received by the  
recipient you specified.  
New, unread messages appear in italics.  
indicates an “Urgent” message.  
The message has been received and  
opened by the recipient you specified.  
(This symbol may not be available.  
Check with your service provider.)  
2. Press  
up or down to scroll through the  
to read a message.  
list of messages.  
3. Press  
20  
Sending and Receiving Text Messages  
Reading the message  
The options available to you may vary. Check with  
your service provider.  
Erasing messages  
Your phone is designed to store 50 text messages  
and pages. It is a good idea to erase old messages,  
as messages take up memory in your phone.  
Note: Sounds embedded in text messages will not  
You have the option of erasing text messages and  
pages as you send or read them, erasing them one  
at a time from the list in the OutBox or InBox, or  
erasing them all at once.  
play if the phone is set to Silent Mode.  
1. If the text message is long, press  
down to  
view the entire message.  
2. When you are finished, you can Reply to the  
sender, Erase the message, Save the message  
to your Saved folder, or set additional Options  
for the message:  
Erasing single messages  
1. Select Menu Messages.  
2. Press  
down to find the type of text  
View Sender information.  
message you want to erase: InBox, OutBox,  
Saved Msgs, or Drafts.  
Save New Address to save the sender’s  
phone number or email address in your  
Contacts list.  
3. Press  
.
4. Highlight the message to erase and press  
.
Forward to forward the message.  
Reply with Copy to reply to the message  
with a copy of the original attached.  
Save AutoText to save the text from the  
message as AutoText, which you can insert  
into other messages. Graphics and sound  
will not be saved as part of AutoText.(For  
more about AutoText, see page 22.)  
5. Press  
to select Erase. A notification  
appears: “Erase this message?”  
6. Select Yes to erase the message.  
Note: You can erase a scheduled message from  
the OutBox, but you cannot cancel delivery of  
the message.  
Erasing all messages  
1. Select Menu Messages Erase Msgs.  
2. Select a folder to erase all messages from:  
InBox, OutBox, Saved Folder, or Drafts. To  
erase messages from all folders,  
select All Messages.  
3. Select Done.  
Setting message alerts  
You can set your phone to alert you of incoming  
text messages or pages. For more information,  
see “Setting message alerts” on page 25.  
User Guide for the Kyocera K122 Phone  
21  
3. A message appears: “Erase all messages?”  
Recent List to select numbers from your  
Recent List.  
New Address to enter the phone number  
or email address manually.  
Contacts List to select numbers or email  
addresses from your phone book.  
Select Yes to erase messages or No to cancel.  
Erasing messages automatically  
Use this setting to have old messages  
automatically erased from the InBox when  
memory is low.  
5. Select Options to select the next number.  
1. Select Menu Messages →  
6. Select Recent List or Contacts then the  
Msg Settings Auto-Erase.  
contact to add.  
2. Highlight Old InBox Msgs and press  
.
7. When finished, select Done.  
Older messages will now be erased as new  
messages are received.  
8. To send a message to your new group, see  
“Sending text messages” on page 18.  
To disable this setting select Menu →  
Messages Msg Settings Auto-Erase →  
Disabled.  
Creating and editing prewritten  
messages (AutoText)  
Your phone comes with prewritten (AutoText)  
messages, such as “Please call me,” which you  
can insert into the body of a text message. You can  
create new ones. Your phone will store up to 40  
AutoText messages, with up to 100 characters  
per message.  
Customizing message settings  
To make messaging easier, you can customize  
settings for sending and receiving messages.  
Creating group lists  
You can create and save a list of multiple  
recipients. Your phone stores five group lists with  
up to 10 recipients per list.  
1. Select Menu Messages →  
Msg Settings Edit AutoText.  
2. To create a new pre-written message,  
select New AutoText.  
1. Select Menu Messages Group Lists →  
Create New.  
-or-  
2. Enter a name for the list. For help entering  
To edit an existing pre-written message,  
text, see page 12.  
highlight the message and press  
.
3. Press  
to select Next.  
3. Enter or edit the text and press  
to select  
4. To enter the first phone number or email  
Done. For help entering text, see page 12.  
address, select an option:  
22  
Sending and Receiving Text Messages  
6
CUSTOMIZING YOUR PHONE  
The contents of the Settings menu are as follows.  
Silent Mode  
Vibrate Only  
Display  
Backlighting  
Network  
Privacy Alert*  
Accessories  
Pwr Backlight  
Vibrate, Ring  
Lights Only  
Norm. Sounds  
My Banner  
Set Phone Line*  
Roam/Svc Alert*  
Roam Option*  
Headset Ring  
Auto-Answer  
TTY Device  
Main Menu View  
Auto-Hyphen  
Language  
Keyguard  
Guard Now  
Convenience  
Shortcut Key  
Time Format  
30s autogrd  
1m autogrd  
5m autogrd  
Disabled  
Fast Find  
Security  
Lock Phone  
Frequent List  
1-Touch Dialing  
Call Guard  
Limit Calls  
Lock Code  
Erase Contacts  
Emergency #’s  
Call Forward*  
Call Waiting*  
Conference*  
Sounds  
Ringer Volume  
Ringer Type  
Business Ring  
Personal Ring  
Roam Ringer*  
Earpiece Volume  
Key Volume  
Key Length  
Missed Call  
Smart Sound  
Minute Alert  
Call Information  
Call Timers  
All Calls Timer  
Reset All Timers  
Msg Settings  
Voicemail Num.  
Alerts  
Signature*  
Edit AutoText*  
Callback Number*  
Msg Receipt*  
Save to OutBox*  
Auto-Erase  
Default Text*  
*Not available on all phones. Check with your service provider.  
User Guide for the Kyocera K122 Phone  
23  
Silencing all sounds  
Choosing ringers  
Your phone is set to make sounds when you  
receive calls, press keys, navigate through menus,  
and receive alerts (such as new messages).  
Your phone has several preset ringers you can  
choose to use for incoming calls.  
1. Select Menu Settings Sounds →  
You can silence all sounds and set the phone  
to vibrate or light up when you receive calls  
and alerts.  
Ringer Type.  
2. Scroll down the list to hear the different rings.  
3. Press  
to select a ringer from the list.  
Setting the phone to vibrate or  
light up  
1. Select Menu Settings Silent Mode.  
Assigning business and  
personal ringers  
You can assign ringers to contacts classified as  
business or personal in your Contacts directory.  
2. Choose an option and press  
:
Vibrate Only—Causes the phone to vibrate  
for the duration of the incoming call or  
other alert. appears.  
Vibrate, Ring—Causes the phone to vibrate  
for the first 10 seconds and then ring for  
the remainder of the incoming call alert.  
appears.  
Note: To classify a contact as Business or  
Personal, see page 15.  
1. Select Menu Settings Sounds.  
2. Ηighlight Business Ring or Personal Ring  
and press  
.
3. Select a ringer and press  
.
Lights Only—Causes the phone to light up  
for the duration of the incoming call or  
Smart Sound  
This setting automatically adjusts the volume  
during a call, based on surrounding noise levels.  
other alert.  
appears.  
Norm. Sounds—Causes the phone to ring  
for the incoming call or alert (in effect,  
returns phone to a non-silent mode).  
1. Select Menu Settings Sounds →  
Smart Sound.  
3. Press  
to return to the home screen.  
2. Highlight Disabled or Enabled and press  
.
Note: The phone will ring when it is attached to  
an external power source (such as a charger),  
even if all sounds have been silenced.  
24  
Customizing Your Phone  
Setting key length  
You can change duration of the tones the phone  
makes when you press the keys.  
Adjusting volume  
You can adjust the earpiece, speakerphone, and  
ringer volume as well as key tones.  
1. Select Menu Settings Sounds →  
Adjusting the earpiece volume  
To adjust the earpiece volume manually during a  
Key Length.  
2. Choose Normal or Long.  
call, press  
up or down.  
3. Press  
to save.  
To set the earpiece volume:  
1. Select Menu Settings Sounds →  
Setting message alerts  
Earpiece Volume.  
You can choose how you want be alerted of  
incoming voicemail, pages, or text messages.  
2. Press  
right to increase the volume, or left  
to save.  
to decrease the volume.  
1. Select Menu Settings Msg Settings →  
3. Press  
Alerts.  
2. Select the type of alert: Message Alert, Page  
Adjusting the ringer volume  
Alert, or Voicemail Alert.  
1. Select Menu Settings Sounds →  
3. Press  
to select an option:  
Ringer Volume.  
Vibrate, Beep, HiYa!, Rock!, Happy, sets  
the phone to alert you once when a new  
message is received.  
2. Press  
right to increase the volume, or left  
to save.  
to decrease the volume.  
3. Press  
Vibe, remind; Beep, remind; HiYa! remind;  
Rock! remind; Happy, remind sets the  
phone to notify you once when a new  
message is received and then notify you  
again every five minutes. To stop a  
Adjusting key tone volume  
You can change the volume of the tones the phone  
makes when you press the keys.  
1. Select Menu Settings Sounds →  
reminder alert, press  
to select Ignore.  
Key Volume.  
Disabled—Turn off message alerts.  
2. Press  
right to increase the volume, or left  
to save.  
to decrease the volume.  
3. Press  
User Guide for the Kyocera K122 Phone  
25  
2. Select Enabled to include the list or Disabled  
Using shortcuts  
From the home screen, you can access shortcuts  
to remove it.  
by pressing  
in four different directions.  
Using the Frequent Contacts shortcut  
Three shortcuts are automatically programmed  
into your phone (down, left, and right).  
From the home screen, press  
down. Your  
15 most frequently called contacts appear at  
the top of the list, followed by your complete  
Contact list.  
Down lists the phone’s Contacts directory.  
Left locks the keypad.  
Right silences sounds and sets phone  
to vibrate.  
Personalizing the screen  
Changing your banner  
The banner is the personal label for your phone.  
It appears on the home screen above the time and  
date. The banner can be up to 14 characters long.  
For the fourth direction (up), you can set a  
shortcut to one of the features of your phone.  
Defining the feature shortcut (up)  
1. Select Menu Settings Convenience →  
1. Select Menu Settings Display →  
Shortcut Key.  
My Banner.  
2. Highlight the feature you want a shortcut to,  
2. Press  
right and then  
to select Edit.  
and press  
Using the up feature shortcut  
From the home screen, press and  
to select it.  
3. Enter your new text. Press  
to clear  
any digits.  
4. Press  
to select Save.  
hold up.  
Choosing a menu view  
Two menu views are available:  
Creating a shortcut to frequent  
contacts  
By default, your phone lists your entire  
contacts list when you select Contacts. You can  
also set the phone to show a list of your most  
frequent contacts.  
1. Select Menu Settings Display →  
Main Menu View, then the option you want:  
Graphic displays a graphical icon view of  
menu items.  
List displays menu items in text format.  
1. Select Menu Settings Convenience →  
Frequent List.  
26  
Customizing Your Phone  
2. Press  
to return to the home screen. The  
Note: Power backlighting may not be available  
next time you select Menu, you will see the  
with accessories.  
menu view you selected.  
1. Select Menu Settings Accessories →  
Pwr Backlight.  
Adjusting the backlighting  
2. Select Always On to keep backlighting on.  
Your screen lights up while you are in a call or  
when you press a key on the keypad. However,  
you can set the length of time that bright  
backlighting remains on.  
Note: The battery charges more slowly when  
power backlighting is on.  
Setting numbers to auto-hyphenate  
1. Select Menu Settings Display →  
Auto-hyphenation, when enabled, automatically  
inserts hyphens into your phone numbers to be  
consistent with the U.S. dialing plan.  
Backlighting.  
2. Select an option from the list:  
5 seconds, 10 seconds, 30 seconds,  
1 minute —Turn backlighting on for 5,  
10, 30 seconds or 1 minute after your  
last keypress.  
For example, 1-222-333-4444.  
Select Menu Settings Display →  
Auto-Hyphen Enabled.  
Choosing a different time/date format  
5 sec/in call, 10 sec/in call, 30 sec/in call,  
1 min/in call—Turn backlighting on for  
the duration of a call, and for 5, 10, 30  
seconds or 1 minute after your  
last keypress.  
1. Select Menu Settings Display →  
Time Format.  
2. Highlight the option you want.  
3. Press  
to save the setting.  
Note: These settings drain the battery more  
quickly and reduce talk and standby times.  
Creating a secure environment  
This section describes all the features involved in  
securing your phone and preventing access to  
personal information. All security features are  
shielded by a four-digit lock code.  
Setting power backlighting  
You can set backlighting to remain on when an  
external power source, such as the AC adapter, is  
used with the phone.  
Changing your lock code  
The lock code is typically 0000 or the last 4 digits  
of your phone number.  
Note: Power backlighting may not be available  
on your phone. Check with your service provider  
for availability.  
User Guide for the Kyocera K122 Phone  
27  
1. Select Menu Settings Security.  
2. Enter your four-digit lock code.  
Restricting calls  
You can restrict the calls that can be made from  
your phone to emergency numbers, your  
contacts, and service provider numbers.  
3. Select Lock Code. A message appears:  
“Change Code?”  
1. Select Menu Settings Security.  
2. Enter your four-digit lock code.  
3. Select Limit Calls.  
4. Press  
to select Yes and enter a new four-  
digit code.  
5. Enter your new lock code again.  
4. Choose an option:  
Locking your phone  
No Limit limits no calls.  
When your phone is locked, you can call only  
emergency numbers or your service provider  
number. You can still receive incoming calls.  
Limit Out [going] calls only. Incoming  
calls can still be received and answered.  
Limit All calls, both incoming  
and outgoing.  
1. Select Menu Settings Security.  
2. Enter your four-digit lock code.  
3. Select Lock Phone.  
Designating emergency numbers  
The emergency numbers feature allows you to  
specify three personal phone numbers that can be  
called when the phone is locked.  
4. Highlight an option:  
Never does not lock the phone.  
On power up locks the phone every time  
you turn it on.  
1. Select Menu Settings Security.  
2. Enter your four-digit lock code.  
3. Select Emergency #’s.  
Now locks the phone immediately.  
5. Press  
.
4. Select an Unassigned slot.  
Unlocking the phone  
1. From the home screen, press  
Note: Enter the phone number, including  
the area code. Do not enter 1 before the  
area code.  
to  
select Unlock.  
2. Enter your four-digit lock code.  
5. Press  
to select Done.  
Notes:  
You can view these numbers only when they’re  
being entered for the first time.  
28  
Customizing Your Phone  
You cannot edit these numbers.  
To switch between phone lines:  
To make a call to an emergency number from  
a locked phone, you must dial the number  
(including area code) exactly as it was stored  
in Emergency Numbers.  
1. Select Menu Settings Network →  
Set Phone Line.  
2. Select one of the two lines and press  
.
Connecting to a TTY/TDD device  
Erasing all contacts  
You can erase all entries from your  
Contacts directory.  
Note: TTY/TDD service may not be available  
on your phone. Check with your service provider  
for availability.  
1. Select Menu Settings Security.  
2. Enter your four-digit lock code.  
3. Select Erase Contacts.  
You can connect the phone to a TTY device for the  
hearing impaired. Note: Enable TTY only when  
using the phone with a TTY device.  
4. Select Yes. A message appears:  
1. Connect the TTY device to the phone.  
“Erase ALL contacts?”  
2. Enter  
your keypad.  
from  
5. Select Yes and press  
to erase all contacts.  
3. Press  
4. Press  
5. Press  
6. Press  
to select the TTY option.  
Network settings  
to clear the message.  
Switching between phone lines  
down to highlight an option.  
.
Your phone can have two service accounts, or  
phone lines, associated with it. Each phone line  
has its own phone number.  
Note: TTY/TDD service may not be available.  
Check with your service provider for  
more information.  
When you are using one line, you cannot receive  
calls from the other. It would be as if the phone  
were “off” for that number. Your voicemail,  
however, will still take messages. All contacts and  
settings are shared for both lines.  
Note: You must first establish a second phone  
line with your service provider. Not all carriers  
provide this service. Check with your service  
provider for availability.  
User Guide for the Kyocera K122 Phone  
29  
Ensuring Call Privacy  
You can set your phone to sound an alert if  
enhanced CDMA voice privacy is lost or regained  
(check with your service provider to see if CDMA  
voice privacy is enabled in your area). When voice  
privacy is activated during a call, you will see a  
message and  
on your screen.  
To set this alert:  
Select Menu Settings Network →  
Privacy Alert Enabled.  
30  
Customizing Your Phone  
7
FUN & GAMES  
The games in this section may not be available on  
your phone. Check with your service provider  
for availability.  
2. Press  
the sounds.  
3. Highlight an option and press  
up or down to scroll through  
to select it:  
Play allows you to listen to the sound.  
If you receive an incoming call alert while you are  
playing Brick Attack™, the game is paused and  
exited. You can return to play once the call alert  
ends. Games do not remain paused if the phone is  
turned off or loses power.  
Send opens a new message entry screen.  
Assign allows you to use the sound as a  
ringer on your phone.  
Delete erases the sound from your  
My Sounds list and from the Ringer menu.  
Brick Attack  
The goal of this game is to eliminate bricks  
arranged in levels. You send a moving ball  
upward using a paddle at the bottom of  
the screen.  
Saving memory  
It is a good idea to erase old sounds and pictures  
as they take up memory in your phone. To erase a  
sound or picture, select it and then select Delete.  
1. Select Menu Fun & Games Brick Attack.  
2. Press  
to select New.  
To pause the game, press  
to Resume.  
To move the paddle, press  
or right.  
, then press  
left  
To exit the game, highlight Exit and  
press  
.
My Sounds  
The My Sounds menu stores the sounds that you  
receive from text messages.  
To access stored sounds:  
1. Select Menu Fun & Games My Sounds.  
User Guide for the Kyocera K122 Phone  
31  
8
TOOLS  
Scheduler  
The Scheduler allows you to schedule events and  
set reminder alerts.  
Alarm Clock  
Use the Alarm Clock to set an alert for a specific  
time. The alert occurs only if the phone is on.  
1. Select Menu Tools Alarm Clock.  
2. Select Set.  
Creating an event  
1. Select Menu Tools Scheduler.  
Press  
and minutes.  
Press  
hours, minutes, and a.m./p.m.  
Use the phone keypad to enter numbers.  
up or down to select an hour  
2. Press  
down to select Add Event and  
press  
.
left or right to switch between  
3. Enter a name for the event. For help entering  
text, see page 12.  
4. Select Next.  
3. Press  
to select Done and save the setting.  
5. Enter the time, length, and alarm for the event.  
4. When the alarm rings, select Off to turn off the  
alarm or Snooze to silence the alarm for  
10 minutes.  
Press  
minutes, and timing of alarm.  
Press left or right to move  
between fields.  
up or down to select date, hour,  
Tip Calculator  
The Tip Calculator helps you calculate how much  
tip to include on a bill.  
6. Select Next, enter a note if required.  
7. Select Next.  
1. Select Menu Tools Tip Calc.  
2. Enter the amount of your bill.  
3. Select Next.  
Viewing, editing, or erasing an event  
1. Select Menu Tools Scheduler.  
2. Select View Day or View Month to find the  
event you want to view, edit, or erase.  
4. Select the amount you want to include as a tip  
(10%, 15%, 18%, 20%, Other) and press  
Your total bill appears, including tip.  
.
3. Press  
an event and press  
4. Select Edit or Erase. Follow the prompts.  
up, down, left, or right to highlight  
to select it.  
5. To split the bill, select Split and press  
.
5. Press  
to return to the home screen.  
32  
Tools  
6. Enter the number of guests and press  
to  
World Clock  
select Next. The amount each guest pays is  
calculated.  
World Clock may not be available on your phone.  
Check with your service provider for availability.  
7. Select Done.  
The World Clock lets you check times in cities  
around the world in relation to local time.  
Calculator  
Use the calculator for basic mathematical  
equations.  
1. Select Menu Tools World Clock.  
Your local time and date is on the first line,  
followed by your selected world city and that  
city’s time and date.  
1. Select Menu Tools Calculator.  
2. Use the keypad to enter numbers.  
When you first access World Clock, you are  
prompted to select a city.  
3. Use  
mathematical operations.  
4. Select = to calculate the result.  
to navigate left and right to select  
2. Press  
to select Cities. The Cities menu is  
displayed, showing 85 world cities in  
alphabetical order.  
Example: Enter 5, press  
right to select X,  
press , enter 2, and then press  
= and obtain the result of 10.  
to select  
3. Press  
up or down to scroll through the  
cities. You can also use the number keys  
(2-9) to alphabetically tab through the list.  
5. Press  
to clear the screen.  
4. Press  
to select a city, like Athens. The  
World Clock menu is displayed again, with  
Athens’ time and date.  
6. Press  
to return to the home screen.  
Options  
±
Changes the number to positive or negative.  
From the World Clock menu, you can also select  
Search to search by city or country.  
C Clears the last entry  
.
Inserts a decimal point.  
1. Select Search from the World Clock menu.  
The Search By menu is displayed.  
2. Select your type of search.  
Adds displayed digit to the value stored  
in memory.  
M+  
MR  
Displays currently stored value on screen.  
Press  
Press  
to search by City.  
down, then press  
MC Clears value currently stored in memory.  
to search  
by Country.  
User Guide for the Kyocera K122 Phone  
33  
3. If you search by City, the Find City screen  
3. Press  
minutes, and seconds. To move the cursor,  
press left or right.  
up or down to set the hours,  
is displayed.  
a. Use your number keys (2-9) to enter the  
letter(s) by which you want to search. For  
4. Select Start and begin the countdown.  
Select Stop to pause the countdown.  
Select Reset to clear the timer.  
example, press  
once to enter the  
letter A.  
b. Press Search.  
5. Press  
to silence the alarm.  
c. Cities beginning with A are displayed, like  
Stopwatch  
Anchorage, Athens, and Atlanta.  
1. Select Menu Tools Stopwatch.  
2. Select Start to begin counting.  
3. Select Stop to stop counting.  
d. Use  
press  
to move through the list, then  
to select a city.  
4. If you search by Country, the Find Country  
screen is displayed.  
4. Select Reset to clear the counter.  
a. Use your number keys (2-9) to enter the  
5. Press  
to return to the home screen.  
letter(s) by which you want to search. For  
example, press  
once to enter the  
letter A.  
b. Press Search.  
c. Countries beginning with A are displayed,  
like Afghanistan, Algeria, and Australia.  
5. Use  
to move through the list, then press  
to select a country.  
Timer  
This timer counts down for a specified  
amount of time. It beeps when that amount of  
time has elapsed.  
1. Select Menu Tools Timer.  
2. Select Set.  
34  
Tools  
9
GETTING HELP  
Customer support  
Your service provider’s customer support  
Puerto Rico:  
Venezuela:  
1-866-664-6443  
0-800-100-2640  
department may be accessible directly from your  
phone when you dial a number such as *611  
(check with your service provider). They can  
answer questions about your phone, phone bill,  
call coverage area, and specific features available  
to you, such as call forwarding or voicemail.  
Before requesting support, please try to  
reproduce and isolate the problem. When you  
contact the Customer Care Center, be ready to  
provide the following information:  
The name of your service provider.  
The actual error message or problem you  
are experiencing.  
For questions about the phone features, refer to  
the materials provided with your phone, or visit  
The steps you took to reproduce the problem.  
The phone’s electronic serial number (ESN).  
For additional questions, you may contact the  
Kyocera Wireless Corp. Customer Care Center in  
any of the following ways:  
To locate the ESN select Menu →  
Phone Info and scroll down to ESN: for the  
11-digit number.  
Phone: 1-858-882-1401. Customer support  
phone numbers are also available in the  
following countries.  
Qualified service  
If the problem with your phone persists, return  
the phone with all accessories and packaging to  
the dealer for qualified service.  
Argentina:  
Brazil:  
0-800-666-0052  
0-800-55-2362  
800-43-1212  
Phone accessories  
To shop for KX17 phone accessories, visit  
call us at 1-800-349-4188 (U.S.A. only) or  
1-858-882-1410.  
Chile:  
Colombia:  
Mexico:  
Peru:  
01-800-700-1546  
001-866-650-5103  
0-800-51-934  
User Guide for the Kyocera K122 Phone  
35  
Become a product evaluator  
To participate in the testing and evaluation of  
Kyocera Wireless Corp. products, including  
cellular or PCS phones, visit  
beta.kyocera-wireless.com.  
36  
Getting Help  
INDEX  
Numerics  
1-touch dialing, 8  
calls, 9  
emergency mode, 9  
exit emergency mode, 9  
phone, 28  
M
A
memory, saving, 21  
menu view, 26  
My Pictures, 31  
My Sounds, 31  
erasing  
alarm clock, 2, 32  
alerts  
contact entries, 29  
text messages, 21  
for messages, 25  
for missed calls, 7  
assigning business and personal  
ringers, 24  
auto-hyphenation, 27  
AutoText, 22  
F
N
fast find, 17  
finding contact information, 16  
frequent contacts, 17  
number mode, 12  
O
outbox, 19  
G
P
B
games  
phone numbers  
editing, 16  
verifying your own, 5  
phone, unlocking, 28  
prepend, 16  
banner, 26  
battery, 1  
blocking outgoing calls, 28  
Brick Attack, 31  
Brick Attack, 31  
My Sounds, 31  
H
hands-free car kit  
purchasing, iv, 35  
hands-free headset  
purchasing, iv, 35  
hard pause, 15, 17  
C
R
calculator, 33  
call counters, 9  
calls  
recent call icons, 7  
resetting the phone, iv  
ringers  
answering, 6  
I
choosing types, 24  
for roaming calls, 11  
silencing, 5  
missed, 6  
icons, 2  
inbox, 20  
redialing, 6  
contacts directory, 15  
contrast, 27  
countdown timer, 34  
customer support, v  
K
volume, 25  
keyguard, 2, 10  
keypad, locking, 10  
roaming, 2  
alerts, 10  
controlling, 10  
ringer, 11  
L
D
lights-only mode, 2, 24  
limiting calls out, 28  
lock code, 28  
locking  
digital mode, 2  
display contrast, 27  
S
saved phone numbers  
editing, 16  
scheduler, 32  
E
emergency  
keypad, 10  
User Guide for the Kyocera K122 Phone  
37  
volume  
earpiece, 6, 25  
screen contrast, 27  
screen icons, 2, 12, 20, 24  
screen savers, 27  
secret contacts, 7  
security, 28  
key beep, 25  
ringer, 25  
W
shortcuts, 26  
world clock, 33  
setting, 26  
using, 26  
silent mode, 2, 24  
sound files, 31  
stopwatch, 34  
symbol mode, 12  
T
technical support, 35  
text entry, 12  
quick reference, 14  
text messages, 18  
time format, 28  
timer, 34  
timing calls, 9  
tip calculator, 32  
Tools  
alarm clock, 32  
calculator, 33  
scheduler, 32  
stopwatch, 34  
timer, 34  
tip calculator, 32  
world clock, 33  
TTY/TDD, 29  
U
unlocking the phone, 28  
V
vibrate, 2, 24  
voicemail, 8, 9  
setting up, 5  
38  

Melitta ME10TS User Manual
LG Electronics Touch AX8575H User Manual
Kenwood KDC U349 User Manual
Kenwood KDC 507 User Manual
JVC 0510KMMCREBET User Manual
HP Hewlett Packard Hewlett Packard Computer Accessories IA 64 User Manual
HP Hewlett Packard DESKJET 712C User Manual
Curtis TLXP12 User Manual
Agilent Technologies Clock Radio 2 User Manual
Addonics Technologies CCMSPC2 User Manual