G2GO M2000
user guide
thorough evaluation of scientific studies. The standards include a
substantial safety margin designed to assure the safety of all
persons, regardless of age and health.
* In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public and to
account for any variations in measurements.
The exposure standard for wireless mobile phones employs a unit
of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/kg.*
Bluetooth® Certification
Tests for SAR are conducted using standard operating positions
specified by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands.
For information about M2000 Bluetooth Certification, visit the
Bluetooth Qualification Program Web site at
qualweb.bluetooth.org
.
Although the SAR is determined at the highest certified power
level, the actual SAR level of the phone while operating can be
well below the maximum value. This is because the phone is
designed to operate at multiple power levels so as to use only the
power required to reach the network. In general, the closer you
are to a wireless base station antenna, the lower the power
output.
Caution
The user is cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void the
warranty and user’s authority to operate the equipment.
Optimize your Phone’s Performance
Use the guidelines in this guide to learn how to optimize the
performance and life of your phone and battery.
Before a phone model is available for sale to the public, it must be
tested and certified by the FCC that it does not exceed the limit
established by the government-adopted requirement for safe
exposure. The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by the FCC for
each model.
Air Bags
If you have an air bag, DO NOT place installed or portable phone
equipment or other objects over the air bag or in the air bag
deployment area. If equipment is not properly installed, you and
your passengers risk serious injury.
Body-worn measurements differ among phone models,
depending upon availability of accessories and FCC
requirements. While there may be differences between the SAR
levels of various phones and at various positions, they all meet
the government requirement for safe exposure.
Medical devices
Pacemakers—Warning to pacemaker wearers: Wireless phones,
when in the ‘on’ position, have been shown to interfere with
pacemakers. The phone should be kept at least six (6) inches
away from the pacemaker to reduce risk.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance
with the FCC RF emission guidelines. SAR information on this
model phone is on file with the FCC and can be found under the
FCC ID: OVF-K4802.
The Health Industry Manufacturers Association and the wireless
technology research community recommend that you follow these
guidelines to minimize the potential for interference.
•
Always keep the phone at least six inches (15 centimeters)
away from your pacemaker when the phone is turned on.
Additional information on SAR can be found on the Cellular
Telecommunications and Internet Association (CTIA) web-site at
•
•
•
Do not carry your phone near your heart.
Use the ear opposite the pacemaker.
.
If you have any reason to suspect that interference is taking
place, turn off your phone immediately.
User Guide
3
Hearing aids—Some digital wireless phones may interfere with
hearing aids. In the event of such interference, you may want to
consult your service provider or call the customer service line to
discuss alternatives.
They include:
•
•
•
•
fueling areas such as gas stations
below deck on boats
transfer or storage facilities for fuel or chemicals
Other medical devices—If you use any other personal medical
device, consult the manufacturer of the device to determine if it is
adequately shielded from external RF energy. Your physician
may be able to help you obtain this information.
vehicles using liquefied petroleum gas, such as propane or
butane
•
•
areas where the air contains chemicals or particles such as
grain, dust, or metal powders
In health care facilities—Turn your phone off in health care
facilities when instructed. Hospitals and health care facilities may
be using equipment that is sensitive to external RF energy.
any other area where you would normally be advised to turn
off your vehicle engine
Potentially unsafe areas
Use with care
Posted facilities—Turn your phone off in any facility when
posted notices require you to do so.
Use only in normal position (to ear). Avoid dropping, hitting,
bending, or sitting on the phone.
Aircraft—FCC regulations prohibit using your phone on a plane
that is in the air. Turn your phone off or switch it to Airplane Mode
before boarding aircraft.
Avoid magnetic environments
Keep the phone away from magnets which can cause improper
functioning of the phone.
Vehicles—RF signals may affect improperly installed or
inadequately shielded electronic systems in motor vehicles.
Check with the manufacturer of the device to determine if it is
adequately shielded from external RF energy.
Keep your phone dry
Keep the phone dry. Damage can result if the phone gets wet.
Water damage is not covered under warranty.
Resetting the phone
If the screen seems frozen and the keypad does not respond to
keypresses, reset the phone by completing the following steps:
Blasting areas—Turn off your phone where blasting is in
progress. Observe restrictions, and follow any regulations or
rules.
Potentially explosive atmospheres—Turn off your phone when
you are in any area with a potentially explosive atmosphere. Obey
all signs and instructions. Sparks in such areas could cause an
explosion or fire, resulting in bodily injury or death. Areas with a
potentially explosive atmosphere are often, but not always, clearly
marked.
1. Remove the battery cover.
2. Remove and replace the battery.
If the problem persists, return the phone to the dealer for service.
Accessories
Use only Kyocera-approved accessories with Kyocera phones.
Use of any unauthorized accessories may be dangerous and will
invalidate the phone warranty if said accessories cause damage
or a defect to the phone.
4
Phones that are rated have the rating on their box or a label on
the box. The ratings are not guarantees and results will vary
depending on the user’s hearing device and hearing loss. If your
hearing device happens to be vulnerable to interference, you may
not be able to use a rated phone successfully. Trying out the
phone with your hearing device is the best way to evaluate it for
your personal needs.
Radio Frequency (RF) energy
Your telephone is a radio transmitter and receiver. When it is on, it
receives and sends out RF energy. Your service provider’s
network controls the power of the RF signal. This power level can
range from 0.006 to 0.6 watts.
In August 1996, the U.S. Federal Communications Commission
(FCC) adopted RF exposure guidelines with safety levels for
hand-held wireless phones. These guidelines are consistent with
the safety standards previously set by both U.S. and international
standards bodies in the following reports:
M-Ratings—Phones rated M3 or M4 meet FCC requirements
and are likely to generate less interference to hearing devices
than phones that are not labeled. M4 is the better/higher of the
two ratings.
•
•
ANSI C95.1 (American National Standards Institute, 1992)
T-Ratings—Phones rated T3 or T4 meet FCC requirements and
are likely to be more usable with a hearing device’s telecoil (“T
Switch” or “Telephone Switch”) than unrated phones. T4 is the
better/higher of the two ratings. (Note that not all hearing devices
have telecoils in them.)
NCRP Report 86 (National Council on Radiation Protection
and Measurements, 1986)
•
ICNIRP (International Commission on Non-Ionizing
Radiation Protection, 1996)
Your phone complies with the standards set by these reports and
the FCC guidelines.
Hearing devices may also be measured for immunity to this type
of interference. Your hearing device manufacturer or hearing
health professional may help you choose the proper rating for
your mobile phone. The more immune your hearing aid is, the
less likely you are to experience interference noise from mobile
phones.
E911 mandates
Where service is available, this handset complies with the Phase I
and Phase II E911 Mandates issued by the FCC.
Hearing Aid Compatibility (HAC) with Mobile
Phones
For more information about hearing aid compatibility, visit the
FCC's Consumer & Governmental Affairs Bureau Web site at
Some mobile phones and hearing devices (hearing aids and
cochlear implants), when used together, result in buzzing,
humming, or whining noises detected by the user.
Kyocera Communications Inc.
Some hearing devices are more immune than others to this
interference noise, and phones also vary in the amount of
interference they generate.
To purchase accessories, visit
The wireless telephone industry has developed ratings for some
of their mobile phones, to assist hearing device users in finding
phones that may be compatible with their hearing devices. Not all
phones have been rated.
User Guide
5
6
Table of Contents
Memory Card . . . . . . . . . . . . . . . . . . . . . . . 11
BREW . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Access Help for BREW . . . . . . . . . . . . . . . 24
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Contacts Menu . . . . . . . . . . . . . . . . . . . . . . 25
6
7
8
Recent Calls . . . . . . . . . . . . . . . . . . . . . . . 32
Recent Calls Menu . . . . . . . . . . . . . . . . . . . 32
Media Gallery . . . . . . . . . . . . . . . . . . . . . . 35
Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Messaging . . . . . . . . . . . . . . . . . . . . . . . . 40
Handle Browser Alerts . . . . . . . . . . . . . . . . 49
Tools & Games. . . . . . . . . . . . . . . . . . . . . 54
Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Memopad . . . . . . . . . . . . . . . . . . . . . . . . . . 60
World Clock . . . . . . . . . . . . . . . . . . . . . . . . 60
4
5
9
User Guide
7
Music Player Settings . . . . . . . . . . . . . . . . . 63
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Convenience . . . . . . . . . . . . . . . . . . . . . . . . 71
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . 74
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Phone Info. . . . . . . . . . . . . . . . . . . . . . . . . . 78
8
1
Get Started
Charge the Battery
Phone Battery
You must have at least a partial charge in the
battery to make or receive calls.
To charge the battery:
Install the Battery
1. With the back of the
phone facing you, press
on the back cover and
slide it to the bottom of
the phone.
1. Remove the rubber
USB cover and connect
the AC adapter to the
microUSB jack on the
2. Lift the back cover from
the bottom to remove.
3. Place the battery in the
phone casing with the
metal contacts toward
the top of the phone.
4. Align the back cover
side tabs with the slots
on each side of the
side of the phone.
2. Plug the adapter into a
wall outlet.
The battery icon in the upper-right corner of the
screen shows whether the phone is:
–
–
–
Charging (animated icon)
Partially charged
Fully charged
You can safely recharge the battery at any time,
even if it has a partial charge.
Warning: The battery does not charge if you
use the phone while it is connected to an AC
adapter.
phone.
5. Slide the back cover to
the top of the phone
until it is securely in
place.
Note: Before removing the
battery, make sure to power
off the phone.
User Guide
9
about whether a replacement battery is
compatible, contact customer support.
Promptly dispose of used batteries in
accordance with local regulations and
recycle if possible. Do not dispose as
household waste.
Supervise all battery usage by children.
Avoid dropping the phone or battery. If the
phone or battery is dropped, especially on a
hard surface, an internal short-circuit can
occur and pose a safety hazard. If you
suspect battery damage, take it to a service
center for inspection.
Battery Safety Guidelines
•
•
Do not disassemble or open the battery.
Do not crush, bend, deform, puncture, or
shred the battery.
•
•
•
Do not attempt to insert foreign objects into
the battery.
•
•
Do not immerse the battery or expose it to
water or other liquids. Even if a battery
appears to dry out and operate normally,
internal parts can slowly corrode and pose a
safety hazard.
•
Always keep the battery between 15 °C and
25 °C (59 °F and 77 °F). Do not expose the
battery to extremes of temperature (heat or
cold), fire, or other hazards such as a
cooking surface, iron, or radiator.
Never use any damaged battery.
Only use the battery for its intended phone.
Only use the battery with a qualified
charger. Use of an unqualified battery
charger may present a risk of fire, explosion,
leakage, or other hazard. If you are unsure
about whether a charger is qualified, contact
customer support.
•
Improper battery use may result in a fire,
explosion, or other hazard.
Common Causes of Battery Drain
•
•
•
•
•
•
•
Playing games or using the Web.
Taking pictures with the flash on.
Keeping backlighting on.
Operating when far away from a base station
or cell site.
•
•
Using data cables or accessories.
Operating when no service is available, or
service is available intermittently.
High earpiece and ringer volume settings.
Repeating sound, vibration, or lighted alerts.
•
•
Do not short-circuit the battery or allow
metallic conductive objects—such as keys,
coins, or jewelry—to contact the battery’s
terminals.
Replace the battery only with another
qualified battery. Use of an unqualified
battery may present a risk of fire, explosion,
leakage, or other hazard. If you are unsure
•
•
10
Phone Battery
Remove the Memory Card
To remove the memory card:
1. Remove the rubber
memory card cover.
2. Use your finger nail to
press and release the
Memory Card
Install the Memory Card
To install the memory card:
1. With the front of the
phone facing you, locate
the rubber memory card
cover on the lower right
hand side.
memory card in the slot
until it bounces
outward.
2. Remove the cover.
3. Carefully take the memory card out of the
slot.
4. Put the rubber cover back into place.
3. Insert the memory card
with the metal contacts facing toward the
front of the phone until it is securely in
place.
Note: With a memory card installed properly,
the memory card icon appears at the top of the
screen.
4. Put the rubber cover back into place.
Warning: Inserting a memory card improperly
may damage the phone.
Format the Memory Card
From Accessories, select Memory Card >
Format Card > Yes to format your memory
card.
Note: Formatting will erase all current
information on the memory card.
User Guide
11
Phone Overview
Get to Know Your Phone
The following shows the front of the phone with the slide closed.
1. LED indicator.
2. Rewind
Player. Press the Play/Pause twice to activate the Music
Player
,
Play/Pause, and Fast Forward keys for the Music
.
3. Home screen.
4. Left softkey selects items that appear on the lower left of the
display. At the home screen, you can select Menu
.
5. Speakerphone key activates the speakerphone and answers
calls.
6. Send key starts or answers calls. Press once to display the recent
calls list and twice to redial the last number dialed. Press and
hold to activate voice commands.
7. Navigation key scrolls through lists and text entry fields and
accesses the following shortcuts from the home screen.
–
–
–
–
Scroll left to launch Browser.
Scroll right to go to Tools & Games > Voice Memo
Scroll up to create a custom menu shortcut.
Scroll down to go to Recent Calls > All
.
.
8. Phone speaker.
9. Right softkey selects items that appear on the lower right of the display. At the home screen, you
can select Contacts
.
10. Back key erases characters in text entry or returns you to the previous screen when navigating
through menus.
11. End key turns the phone on and off, ends calls or browser session, and returns you to the main
screen.
12. OK key selects a menu item or option. At the home screen, pressing the OK key displays the
main menu.
12
Phone Overview
The following shows the phone’s QWERTY keypad with the slide open.
1. Right softkey selects items that appear on the lower right of
the display.
2. Enter key generates a carriage return in text entry.
3. Back key erases characters in text entry or returns you to the
previous screen when navigating through menus.
4. Navigation keys, with the slide open, scroll through lists and
text entry fields and access the same shortcuts from the main
screen as the Navigation key on the front. The left, center,
and right Navigation keys also function as the Rewind
,
Play/Pause, and Fast Forward keys for the music player.
5. QWERTY keypad.
6. Number keypad.
7. Symbol key enables you to type symbol characters or toggle
between alphabets and symbols. Press the Symbol key once
to change the input mode for the next character; press twice
(within 2 seconds) to toggle between alphabets and symbols.
8. Shift key enables you to press once to change case mode or
press twice to toggle between case modes.
9. Left softkey selects items that appear on the lower left of the display.
The following shows the back of the phone with the slide closed.
1. Accessory eyelet (for optional straps and lanyards).
2. Jack for AC adapter (included) and microUSB cable (sold
separately).
3. Jack for a hands-free headset (sold separately).
4. Memory card slot.
5. Camera lens.
6. Camera key activates camera mode. To activate camera
mode, press and hold the Camera key.
7. Volume key raises or lowers ringer volume.
Warning: Inserting an accessory into the wrong jack may
damage the phone.
User Guide
13
LED Indicator
Your phone’s LED indicator displays different colors depending on the alert.
Incoming call
Low battery
New message
Green—blinks (not for call waiting calls).
Red—blinks until you charge the phone.
Red—blinks for the first minute or until you respond to the alert,
whichever happens first.
Missed call
Red—blinks for the first minute or until you respond to the alert,
whichever happens first.
In call
Green—blinks until the call ends.
Battery charging
Fully charged battery
Alarm or scheduler alert
Red—displays until the phone is fully charged.
Green—displays until you disconnect the charger.
Red—blinks for the first minute or until you respond to the alert,
whichever happens first.
Bluetooth
Red—blinks until you respond to Bluetooth request.
14
Phone Overview
Screen Icons
These icons may appear on your phone’s screen.
A headset or other hands free device is in
operation.
The phone is operating in IS2000 (1X) digital
mode.
The phone has a high speed data connection.
A call is in progress.
The phone is in airplane mode.
The alarm clock is set.
The phone is set to light up instead of ring.
New photo and text message.
New photo and voice message.
New photo message.
The phone is set to auto answer.
The battery is fully charged. The more black
bars, the greater the charge.
Bluetooth wireless technology is disabled
(Off).
New photo, voice and text message.
New text message.
Bluetooth wireless technology is enabled
(On).
New voice and text message.
New voice message.
The phone is in camera mode.
The battery will not charge.
The phone is not receiving a signal. You
cannot make or receive calls.
Data service is available and active on your
phone. Check with your service provider for
availability.
The phone is roaming outside of its home
service area.
Data service is available, but the phone is
dormant.
The memory card is in use.
The phone is in privacy mode or is accessing
a secure Web site.
(blinking) The phone is receiving high-speed
data.
The phone is receiving a signal. You can
make and receive calls. Fewer bars indicate a
weaker signal.
(blinking) The phone is sending high-speed
data.
The phone is operating in IS95 digital mode.
Content is DRM protected.
The speaker phone is turned on.
A T-coil hearing aid is in operation.
A traffic channel is active.
Position location is set to your service
provider and to emergency services.
The phone is in TTY device mode.
Position location is set to emergency services
only.
The phone is set to vibrate or to vibrate and
then ring.
User Guide
15
Main Menu
Press the OK key or select Menu when the phone is in idle state to access the main menu.
Idle State >
Menu
Level 1 >
BREW
Level 2
Download an application.
Contacts
Access these options: View All
,
Add New
,
Groups
,
Speed Dial List
,
Voice Dial List
,
Erase Contacts, and
Contacts Count
.
Recent Calls
Access these options: All
,
Incoming
,
Outgoing
,
Missed,
Erase Call List
,
Call Timers, and Kilobyte Counter.
Media Gallery
Messaging
Access these options: Images
,
Sounds, and Delete All
.
Access these options: New Text Msg
,
New Pic Msg
,
Voicemail Inbox Browser Alerts Sent Msgs
Saved Msgs Drafts Msg Settings Message Groups
Erase Msgs, and Message Count
,
,
,
,
,
Outbox,
,
,
,
.
Tools & Games
Access these options: Brick Attack
Scheduler Alarm Clock Tip Calculator
Timer Stopwatch Memopad, and World Clock.
,
Voice Memo
,
,
,
,
Calculator,
,
,
Browser
Browse the web.
Play a media file.
Music Player
Settings
Access these options: Bluetooth
Convenience Voice Features Accessories
Network Security, and Phone Info
,
Sounds
,
Display
,
,
,
,
USB Mode,
,
.
Camera
Take a picture.
Note: The menu items on your phone can change depending on the services provided by your service provider.
Check with your service provider.
16
Main Menu
Guide Conventions
In this guide, the following conventions are
used when describing phone features.
Select means to press the Left softkey, Right
softkey or OK key to select an item seen on the
display. For example, “Select Menu” tells you
to physically press the left softkey to choose
Menu from the display.
Press means to press a phone key. For example,
“Press the Send key to make a phone call” tells
you to physically press the Send key on your
phone.
Scroll means to use the Navigation key to
move though a list on the display. For example,
“Scroll through your contacts list to choose a
contact” means to physically press the
Navigation key up or down to scroll through
the list on the display.
>
(greater than symbol) tells you to select an
option from a menu or list. For example,
Menu Settings” means to:
“
>
1. Press the left softkey to select Menu
.
2. Scroll to the Settings option.
3. Press the OK key to select Settings
.
User Guide
17
2
Call Features
This section describes the basic features related
to calls.
Call Using Voice Commands
You can use voice commands to call a contact
from your voice dial list or to dial a phone
Power Phone Up
•
To turn your phone on, press the End key
and wait until the phone display lights up.
To turn your phone off, press and hold the
End key until the phone plays a short
musical sound and turns off.
Redial a Number
1. Press the Send key to open your call history.
2. Highlight a phone number or contact and
press the Send key.
•
Note: To redial the last number called, received
or missed, press the Send key twice.
Make Phone Calls
Make sure you are in an area where a signal can
be received. Look for the signal strength icon on
the home screen. The more bars, the stronger
the signal. If there are no bars, move to where
the signal strength is better.
Answer Phone Calls
When a call comes in, the phone rings, vibrates,
or lights up. The phone number of the caller
also appears if it is not restricted. If the number
is stored in your contacts list, the contact’s name
appears. There are several ways you can answer
a phone call.
When the phone has been idle for a time, it
changes to power save mode. Press any key to
return to normal operating mode.
There are several ways you can make a phone
call.
Answer Using Earpiece
Press the Send key.
Call Using a Number
1. Enter a phone number.
2. Press the Send key.
Answer Using Speakerphone
Press the Speakerphone key.
Call Using a Contact
1. From View All, highlight a contact.
2. Press the Send key.
18
Power Phone Up
Silence an Incoming Call
End Phone Calls
•
To silence the phone without answering the
call, press the Back key or press the Volume
key up or down.
Press the End key.
Activate Voice Dialing
•
To silence the phone and answer the call,
press the Back key or press the Volume key
up or down and then press the Send key.
1. Press and hold the Send key.
2. Follow the prompts.
Use Speed Dialing
Speed dialing allows you to assign a one- or
two-digit shortcut to a contact. Before you can
use speed dialing you must save a phone
number as a contact and assign a speed dial
location to it. See “Assign Speed Dials to
Contacts” on page 28.
Volume Control
Adjust Volume during a Call
Press the Volume key up or down to adjust the
earpiece volume during a call.
To call a contact that has a speed dial location:
1. Enter the one- or two-digit speed dial
location.
Use the Speakerphone
Your phone has a built-in speakerphone.
•
To turn on the speakerphone, press the
Speakerphone key. The speakerphone icon
appears on the home screen when the
speakerphone is on.
2. Press the Send key.
•
To turn off the speakerphone, press the
Speakerphone key again.
Note: If you press the Speakerphone key
during an incoming call, you will answer the
call.
User Guide
19
Emergency Services
Call Emergency Service
You can call an emergency code even if your
phone is locked or your account is restricted.
When you call, your phone enters emergency
mode. This enables the emergency service
exclusive access to your phone to call you back,
if necessary. To make or receive regular calls
after dialing the code, you must exit this mode.
To dial an emergency code:
1. Enter your 3-digit emergency code.
2. Press the Send key.
Note: Regardless of your 3-digit emergency
code (911, 111, 999, 000, etc.), your phone
operates as described above.
Exit Emergency Services
When you have completed the emergency call:
1. Select Exit
.
2. Select Exit again to confirm your choice.
Note: To determine who has access to your
location, see “Set Location Information” on
page 76.
20
Emergency Services
3
Text Entry
You can enter letters, numbers, and symbols in
contacts, text messages, and your banner.
Enter Numbers with QWERTY Keypad
From the text entry field, select Options >
Numbers Only and press the number key to
enter your number.
Text Entry Modes
The text entry screen has the following features:
1. Characters
The
icon indicates you are in Numbers
Only mode. Press the Symbol key twice
quickly (within two seconds) to change modes.
Press the Symbol key once to change the mode
for the next character only.
remaining that
you can type.
Allowedlength
of messages
can vary
depending on
your service.
Enter Letters with QWERTY Keypad
From the text entry field, select Options >
Normal Alpha to enter letters. You can enter
text in the following ways:
2. Text entry fields.
•
To enter a letter, press the key for the letter.
Press the Shift key to change the case of a
letter. Press the Shift key twice quickly
(within two seconds) to change case modes.
Press the Space key to enter a space.
To enter a number or symbol, press the
Symbol key and the key for the number or
symbol.
3. Current capitalization setting.
4. Current text entry mode.
Note: The entry mode will default depending
on the task you are doing. For example, when
entering a phone number, you’re in a number
mode. When entering a name for a contact,
you’re in a letter mode.
•
The
icon indicates that you are in Normal
Enter Phone Numbers from the
Main Screen
1. From the main screen, press the OK key to
display the on-screen number keypad.
2. Scroll through to select your desired
numbers.
Alpha mode. Press the Symbol key twice
quickly (within two seconds) to change modes.
Press the Symbol key once to change the mode
for the next character only.
3. Press the Send key to call the entered phone
number or select Save to save it.
User Guide
21
Rapid Entry with QWERTY Keypad
When you press a series of keys using Rapid
entry, your phone checks its dictionary and
guesses at the word you are trying to spell.
From a text entry field, select Options > Rapid
Entry to speed up word completion. To enter
words, press a key once. For example, to enter
the word “Wyoming” press the w > y > o keys
and then the OK key.
The
icon indicates you are in Rapid Entry
mode. To change case mode, press the Shift
key.
Enter Symbols with QWERTY Keypad
•
While entering text in Normal Alpha mode,
do one of the following to enter symbols
displayed on your keypad:
–
Press and hold the Symbol key while
entering the symbols.
–
Press the Symbol key and then the key
for the symbol.
•
While entering text in Normal Alpha mode,
do the following to access the full set of
symbols:
a. Select Options > Add Symbols
.
b. Scroll up or down to view the list of
symbols.
c. Press the letter key corresponding to the
symbol to enter it.
22
Text Entry Modes
Text Entry Quick Reference
This table gives instructions for entering letters, numbers, and symbols.
To..
Do this..
Enter a letter
Enter a number
Enter a symbol
In Normal Alpha mode, press a key.
In Numbers Only mode, press a key.
Use Normal Alpha mode, press the Symbol key and
then a key.
Enter a space
Press the Space key.
Erase a character
Press the Back key.
Erase all characters
Move the cursor right or left
Move the cursor up or down
Change input mode
Change case mode
Press and hold the Back key.
Scroll left or right.
Scroll up or down.
Press the Symbol key twice quickly.
Press the Shift key twice quickly.
Capitalize any letter
In Normal Alpha mode, press the Shift key. Choose
uppercase.
Lowercase any letter
In Normal Alpha mode, press the Shift key. Choose
lowercase.
Initial caps
In Normal Alpha mode, press the Shift key. Choose
sentence case.
Select an option at the bottom of the screen
Press the appropriate left or right softkey.
User Guide
23
4
BREW
How does BREW Work?
Download an Application
Your Kyocera phone has the added ability to
download and manage applications through
BREW.
1. From BREW, select Mobileshop >
Catalog. When a connection is made, a list
of application types appears.
BREW brings you the full range of applications
and services you have come to expect from the
Internet: Email and instant messaging, real-time
navigation services, group chat, games, relevant
news, and much more.
You connect to the server, download
applications, and then manage them as you like.
When you choose an application, you have the
option of choosing a demo, various limited use
options, or the full version—all varying in
price. If you choose a demo, BREW lets you
know when it has expired. If you choose a
priced version, the amount is added to your
phone bill. BREW also lets you know if you’re
running out of memory. At that point, you can
either disable an application or remove it
completely.
2. Select an application type. A list of
applications appears. Long titles scroll left
as you highlight them.
3. Select an application. A list of usages
appears. There may be one or more usages
available. Prices are specified for each
usage.
4. Select a usage for the application. You are
prompted to confirm your purchase.
5. Select Yes to confirm. The application
downloads to your phone. Download times
may vary.
To open the application now, select Yes. If you
select No, you return to BREW, where you see
a link to your new application.
Note: Your connection to the application server
automatically ends after 30 seconds, unless you
connect again to download more apps. If you
want to end the connection manually, press the
End key on your phone.
Once applications are loaded, you can update to
newer versions as they become available.
For more information about BREW capabilities
and application pricing, contact your service
provider.
Access Help for BREW
From BREW, select Help to get instructions on
how to run and manage your downloaded
applications.
24
How does BREW Work?
5
Contacts
Use Contacts to store information about a person or company.
Contacts Menu
Select Contacts from the main menu to access the following functions:
Level 1 >
Contacts
Level 2 >
Level 3
View All
Access your existing contacts list.
Add a new entry to your contacts list.
View your groups of contacts.
Add New
Groups
Speed Dial List
Voice Dial List
Erase Contacts
View your contacts assigned with speed dials.
View your contacts assigned with voice dials.
Access these options: Contacts Only
,
Groups Only, and
Erase All
.
Contacts Count
Check how much contact space you have used.
View Contact Details
Access Contacts
Access Contacts List
1. From View All, enter the first letter of your
desired contact and scroll through to
highlight it.
1. From View All, select a contact.
2. At the contact details screen, select a
number, address or note.
3. Select the detail you want to view. For
example, to view a phone number, select
2. Do one of the following:
View Number
.
–
–
Press the Send key to call the contact.
Press the OK key to view the contact’s
details.
Use Frequent List
With Frequent List enabled, you can view 15
of your most frequently called contacts. See
“Enable Frequent List” on page 73.
–
–
Select New to create a new contact.
Select Options to access more functions.
User Guide
25
Use Fast Find
With Fast Find enabled, you can press one or
two keys to view close matches of the contact.
See “Call Contact using Fast Find” on page 72.
Add a Code or Extension
When saving the phone number of an
automated service, you may include a pause for
dialing an extension.
1. From the home screen, enter a phone
number.
2. Select Options and a type of pause:
Add Contacts
Add Contacts from Home Screen
1. From the home screen, enter a phone
number to save (include the area code).
2. Select Save > Save New Contact
3. Enter a name for the contact.
–
Time Pause causes the phone to stop
dialing for two seconds.
–
Hard Pause causes the phone to wait
until you select Release while making
the call.
.
4. Enter additional phone numbers, email
addresses, and other contact details. (Scroll
up or down to move through the contact
fields.)
3. Enter the remaining numbers and select
Save > Save New Contact
4. Complete the contact information and select
Save
.
.
5. When done, select Save
.
Use Contacts
Call Contacts
1. From View All, select a contact.
2. At the contact details screen, select a
number.
Add Contacts from Contacts Menu
1. From Add New, enter a name for the
contact. Scroll down to the next field when
done.
2. Enter a primary number for the contact.
3. Enter additional phone numbers, email
addresses, and other contact details. (Scroll
up or down to move through the contact
fields.)
3. Select Call
.
Send a Text Message to Contacts
1. From View All, select a contact.
2. At the contact details screen, select a
number or email address.
4. When done, select Save
.
3. Select Send Text Msg
4. Complete your text message and select
Send
.
.
26
Add Contacts
Send a Multimedia Message to Contacts
1. From View All, select a contact.
2. At the contact details screen, select a
number or email address.
Assign Number Types
1. From View All, select a contact.
2. At the contact details screen, select Edit
.
3. Press down twice to scroll to the number
type dropdown and press the OK key.
4. Select a number type. The appropriate icon
appears next to the number in your contacts
list.
3. Select Send Pic Msg
4. Complete your multimedia message and
select Send
.
.
Send a Contact vCard
1. From View All, select a contact.
2. At the contact details screen, select the
contact name.
3. Select Send as vCard > Via MMS Msg (to
attach to a multimedia message), Via
Bluetooth (to send to a Bluetooth-enabled
device), or To Printer (to print on a
Bluetooth-enabled device).
5. Select Save
.
Assign Ringers to Contacts
1. From View All, select a contact.
2. At the contact details screen, select the
contact name.
3. Select Ringer > Assign Ringer and a ringer
from the list. (Scroll to play the ringers.)
Assign Message Tones to Contacts
1. From View All, select a contact.
2. At the contact details screen, select the
contact name.
3. Select Msg Tone > Assign Msg Tone and a
ringer from the list. (Scroll to play the
ringers.)
4. Complete the appropriate task to send the
contact information.
Note: If your phone has no Bluetooth feature,
you may only send the contact information with
a message.
Customize Contacts
Assign Pictures to Contacts
1. From View All, select a contact.
2. At the contact details screen, select the
contact name.
3. Select Picture > Assign Picture to assign a
picture.
Edit Contact Details
1. From View All, select a contact.
2. At the contact details screen, select Edit
3. Enter additional phone numbers, email
.
addresses, and other contact details. (Scroll
up or down to move through the contact
fields.)
4. When done, select Save
.
User Guide
27
Add a Prefix to Phone Numbers
Use Prepend to add a prefix, such as an area
code, to a phone number:
1. From View All, select a contact.
2. At the contact details screen, select a
number.
Add Contacts to Groups
1. From View All, select a contact.
2. At the contact details screen, select a
number or email address.
3. Select Add To Group
.
4. Select groups from the list provided. A
checkmark appears next to each selection.
You can also remove a checkmark.
3. Select Prepend to enter the prefix at the
beginning of the number.
4. Select Save
.
5. When finished, select Done.
Assign Speed Dials to Contacts
1. From View All, select a contact.
2. At the contact details screen, select a
number.
Visit Web Addresses
1. From View All, select a contact.
2. At the contact details screen, select a Web
address.
3. Select Add Speed Dial
.
3. Select Launch Web.
4. Select a location from the list to assign the
speed dial number.
Erase Contacts
Change Primary Numbers
When a contact has more than one number, the
first number becomes the primary number by
default. To change the contact’s primary
number:
1. From View All, select a contact.
2. At the contact details screen, select a
number.
Erase Contact Details
1. From View All, select a contact.
2. At the contact details screen, select a
number, address or note.
3. Select your desired erase option and Yes
.
For example, to erase an email address,
select Erase Address > Yes
.
Erase an Entire Contact
1. From View All, select a contact.
2. At the contact details screen, select the
contact name.
3. Select Primary Number > Yes
.
3. Select Erase Contact > Yes to erase the
entire contact.
28
Erase Contacts
4. When finished, select Done
Your new group appears the next time you view
your groups list.
.
Erase All Contacts
From Erase Contacts, select Contacts Only >
Yes > Yes to erase all your contacts.
Note: You cannot recover deleted information.
Send Text Messages to Groups
1. From Groups, highlight a group.
Erase All Contacts and Groups
From Erase Contacts, select Erase All > Yes >
Yes to erase all your contacts and groups.
Note: You cannot recover deleted information.
2. Select Options > Send Text Msg
3. Complete your text message and select
Send
.
.
Send Multimedia Messages to Groups
Contact Groups
1. From Groups list, highlight a group.
You can assign your contacts to groups. Your
phone comes with default groups. You can also
create your own groups.
2. Select Options > Send Pic Msg
3. Complete your multimedia message and
select Send
.
.
View Groups
1. Select Groups to view your preloaded
groups, followed by the custom groups you
have created.
Add or Remove Contacts from Groups
1. From Groups, highlight a group.
2. Select Options > Edit
.
3. If you are modifying a group you created,
select Next. Otherwise, go to the next step.
4. Select contacts from the list provided. A
checkmark appears next to each contact in
the group. Press the OK key to add or
remove checkmarks.
2. Highlight a group and do one of the
following:
–
Press the OK key to view the group
details.
–
–
Select New to create a new group.
Select Options to access more functions.
5. When finished, select Done
.
Create a New Group
1. From Groups, select New
Assign Ringers to Groups
1. From Groups, select a group.
2. At the group details screen, scroll to the
group name.
3. Select Options > Ringer > Assign Ringer
and a ringer from the list. (Scroll to play the
ringers.)
.
2. Enter a name for the group and select Next
3. Select contacts from the list provided. A
checkmark appears next to each selection.
You can also remove checkmarks.
.
User Guide
29
Assign Message Tones to Groups
1. From Groups, select a group.
2. At the group details screen, scroll to the
group name.
3. Select Options > Msg Tone > Assign Msg
Tone and a ringer from the list. (Scroll to
play the ringers.)
Create a Message Group
You can create a group specifically for
messaging, based on a contact group.
1. From Groups, highlight a group.
2. Select Options > Create Msg Group
.
3. Modify the name for the group and select
Next
.
4. Select contacts from the list provided. A
checkmark appears next to each contact in
the group. Press the OK key to add or
remove checkmarks.
Assign Pictures to Groups
1. From Groups, select a group you have
created.
2. At the group details screen, scroll to the
group name.
5. When finished, select Done
.
Your new message group appears the next time
you view your message groups list.
3. Select Options > Picture > Assign Picture
to assign a picture.
Erase a Group
Send a Group vCard
1. At the Groups list, highlight a group.
2. Select Options > Send as vCard > Via
1. From Groups, highlight a group.
2. Select Options > Erase > Yes
.
Bluetooth
.
Erase All Groups
From Erase Contacts, select Groups Only >
Yes > Yes to erase all your groups.
3. Complete the appropriate task to send the
group information.
Note: You cannot recover deleted information
or erase preloaded groups.
30
Contact Groups
Speed Dial List
Assign Speed Dial Numbers
1. From Speed Dial List, highlight an
unassigned number (marked as empty).
Check Contacts
Select Contacts Count to check how many
contacts you have stored.
2. Select Assign
.
3. At the contacts list, select a contact.
4. At the contact details screen, select a phone
number.
Clear Speed Dial Numbers
1. From Speed Dial List, highlight an assigned
number.
2. Select Erase > Yes
.
Voice Dial List
Enable Voice Dial Tags
Your phone creates a voice dial tag for each
contact that has a name field which is not blank
or a name that is more than five syllables. You
can enable or disable the voice dial tags
associated with your contacts.
1. From Voice Dial List, press the OK key to
add or remove checkmarks. A checkmark
appears next to each enabled voice dial.
(Scroll through the list to play the voice dial
tags.)
2. When done, select Save
.
Search Contact Voice
You can use voice commands to find a contact
in your voice dial list. For more information,
User Guide
31
6
Recent Calls
Recent Calls Menu
Select Recent Calls from the main menu to access the following functions:
Level 1 >
Level 2 >
All
Level 3
Recent Calls
See a list all voice calls.
Incoming
Outgoing
Missed
See a list all voice calls you have received.
See a list all voice calls you have made.
See a list all voice calls you have missed.
Erase Call List
Access these options: All
,
Incoming, Outgoing, and
Missed
.
Call Timers
Access these options: Life Timer
,
Recent Calls, Home
Calls Roam Calls Incoming Calls, and Outgoing Calls.
,
,
Kilobyte Counter
See how much data you have sent and received.
Return an Outgoing Call
Work with Call Lists
Return Any Call
1. From All, highlight a number.
2. Press the Send key to call the number or
select Options to access more features.
This list contains all calls made and received.
1. From Outgoing, highlight a number.
2. Press the Send key to call the number or
select Options to access more features.
This list contains all calls you have made.
Return a Missed Call
1. From Missed, highlight a number.
2. Press the Send key to call the number or
select Options to access more features.
This list contains all calls you received, but did
not answer.
Return a Received Call
1. From Incoming, highlight a number.
2. Press the Send key to call the number or
select Options to access more features.
This list contains all calls received.
32
Recent Calls Menu
Deal with a Missed Call
Erase Call List Records
Erase a Single Record
1. At a call list, highlight a contact.
2. Select Options > Erase Record > Yes.
When you have missed a call, “Missed Call”
appears on your screen. You can do one of the
following:
•
•
To clear the screen, select OK
To view the call details, select Calls and
press the OK key.
.
Erase a Call List
From Erase Call List, select a call list to erase
records from. For example to erase all records
from the incoming call list, select Incoming >
•
To return the call, select Calls and press the
Send key.
Call List Options
Yes
.
Save Number from Call List
1. At the call list, highlight a number.
Erase All Call Lists
From Erase Call List, select All > Yes to erase
all records from all call lists.
2. Select Options > Save
.
3. Select Save New Contact to create a new
contact or Add to Existing to add number to
an existing contact.
Work with Call Timers
View All Calls Timer
Select Life Timer to view the number of calls
and the total call time. Select Done when
finished.
View Contact from Call List
1. At a call list, highlight a contact.
2. Select Options > View to see the contact
details screen.
This timer tracks all calls made and received for
life of the phone and cannot be reset.
Send Text Message from Call List
1. At a call list, highlight a contact.
View Recent Calls Timer
Select Recent Calls to view the number of calls
and the total call time. Select Done when
finished.
2. Select Options > Send Text Msg
3. Complete your text message and select
Send
.
.
This timer tracks all calls made and received
since you last reset the timer. To reset this timer
Send Multimedia Message from Call List
1. At a call list, highlight a contact.
to zero, select Reset > Yes
.
2. Select Options > Send Pic Msg
3. Complete your multimedia message and
select Send
.
.
User Guide
33
View Home Calls Timer
Select Home Calls to view the number of calls
and the total call time. Select Done when
finished.
View Outgoing Calls Timer
Select Outgoing Calls to view the number of
calls and the total call time. Select Done when
finished.
This timer tracks all calls made and received in
your home network since you last reset the
timer. To reset this timer to zero, select Reset >
This timer tracks all calls made since you last
reset the timer. To reset this timer to zero, select
Reset > Yes
.
Yes
.
View Data Counter
View Roam Calls Timer
Select Kilobyte Counter to view amount of
kilobytes sent during data calls. Select Done
when finished.
Select Roam Calls to view the number of calls
and the total call time. Select Done when
finished.
This timer tracks kilobytes sent during data
calls made, data calls received, and for the life
of the phone. To reset the data counter to zero,
This timer tracks all roaming calls made and
received since you last reset the timer. To reset
this timer to zero, select Reset > Yes
Your phone can alert with a short beep ten
seconds before each minute passes during a call.
For more information, see “Enable Minute
Alert” on page 73.
.
select Options > Reset > Yes
.
View Incoming Calls Timer
Select Incoming Calls to view the number of
calls and the total call time. Select Done when
finished.
This timer tracks all calls received since you
last reset the timer. To reset this timer to zero,
select Reset > Yes
.
34
View Data Counter
7
Media Gallery
Use Media Gallery to retrieve and playback media files and other downloads.
Media Gallery Menu
Select Media Gallery from the main menu to access the following functions:
Level 1 >
Level 2 >
Images
Level 3
Media Gallery
Access these options: Camera Pictures Saved Images,
Wallpapers
Caller IDs
,
,
Wallpaper Shuffle
,
Screensavers, and
Ringers My Music
Images Only
.
Sounds
Access these options: Saved Sounds
Ringer Shuffle, and Voice Memos
,
,
,
.
Delete All
Access these options: Camera Pics Only
Sounds Only, and Delete All
,
,
.
Send an Image
Images
Send a Picture
1. From Saved Images, select an image.
2. Select Send > Via EMS Msg (to attach to
1. From Camera Pictures, select a picture.
2. Select Send > Via EMS Msg (to attach to
an enhanced message), Via MMS Msg (to
attach to a multimedia message), Via
Bluetooth (to send to a Bluetooth-enabled
device), or To Printer (to print on a
an enhanced message), Via MMS Msg (to
attach to a multimedia message), Via
Bluetooth (to send to a Bluetooth-enabled
device), or To Printer (to print on a
Bluetooth-enabled device).
3. Complete the appropriate task.
Note: If your phone has no Bluetooth feature,
you may only send the file with a message.
Bluetooth-enabled device).
3. Complete the appropriate task.
Note: If your phone has no Bluetooth feature,
you may only send the file with a message.
User Guide
35
Change the Default Wallpaper
Sounds
Send a Sound
1. From Wallpapers, select a wallpaper.
2. Select Set Default
.
1. From Saved Sounds, highlight a sound.
2. Select Send > Via EMS Msg (to attach to
an enhanced message), Via MMS Msg (to
attach to a multimedia message), or Via
Bluetooth (to send to a Bluetooth-enabled
device).
3. Complete the appropriate task.
Note: If your phone has no Bluetooth feature,
you may only send the file with a message.
Edit the Wallpaper Shuffle
1. From Wallpaper Shuffle, select Edit. With
no wallpapers saved, you need to add files.
2. Select Add to include a file in the shuffle,
Remove to remove a file from the shuffle,
or Options to access more features.
3. When finished, select Options > Done
.
Change the Default Screensaver
1. From Screensavers, select a screensaver.
Assign a Ringer
1. From Ringers, highlight a ringer.
2. Select Assign and choose how you want to
assign the ringer.
2. Select Set Default
.
Assign a Caller ID
1. From Caller IDs, select an image.
3. Complete the appropriate task.
2. Select Assign
.
Edit the Ringer Shuffle
1. From Ringer Shuffle, select Edit
3. At the contacts list, select a contact.
.
2. Select Add to include a file in the shuffle,
Remove to remove a file from the shuffle,
or Options to access more features.
3. When finished, select Options > Done
.
You can only edit the shuffle with at least a file
added.
36
Sounds
Play a Song
Send a File
1. From My Music, select All Songs
.
1. From a media file list, highlight a file.
2. Select Options > Send > Via EMS Msg (to
attach to an enhanced message), Via MMS
Msg (to attach to a multimedia message),
Via Bluetooth (to send to a
2. Choose a song and select Play
Use the Navigation key to control the playback
tools displayed.
.
Access a Playlist
1. From My Music, select Playlists
2. Choose a playlist and select Play
Use the Navigation key to control the playback
Bluetooth-enabled device), or To Printer
(to print on a Bluetooth-enabled device).
The options available depend on the file
type.
.
.
tools displayed.
3. Complete the appropriate task.
Note: If your phone has no Bluetooth feature,
you may only send the file with a message.
Play a Voice Memo
1. From Voice Memos, highlight a memo you
have recorded.
Send a File to an Online Location
1. From a media file list, highlight a file.
2. Select Play
.
Use the Navigation key to control the playback
2. Select Options > Send to Online.
tools displayed.
Assign a File
1. From a media file list, highlight a file.
2. Select Options > Assign and choose how to
assign the file.
Media File Options
Rename a File
1. From a media file list, highlight a file.
3. Complete the appropriate task.
2. Select Options > Rename
3. Enter a new name and select Save
.
Lock a File
.
1. From a media file list, highlight a file.
2. Select Options > Lock to protect a file from
being accidently erased. To unlock the file,
You can only rename unlocked files. Preloaded
files on your phone are always locked.
select Options > Unlock
.
User Guide
37
Play a File
1. From a media file list, highlight a file.
Modify a File
1. From a media file list, select a file.
2. Select Options > Play
.
2. Select Options > Modify.
Use the Navigation key to control the playback
tools displayed.
3. Select Options and an option to rotate,
resize, and so on.
4. When done, select Save to save over an
existing file or as a new one.
Copy a File to a Memory Card
1. From a media file list, highlight a file.
2. Select Options > Copy File to copy the file
to your memory card.
Use the Zoom
1. From a media file list, select a file.
Copy File is only available when you have a
memory card inserted.
2. Select Options > Zoom.
3. Use the Navigation key to zoom in and out.
4. Select Cancel to exit.
Move a File to a Memory Card
1. From a media file list, highlight a file.
2. Select Options > Move File to move the file
to a memory card. If the file is already on a
memory card, Move File moves the file to
the phone.
View a Slideshow
1. From Camera Pictures, select Options >
Slideshow to play the slideshow of the files
contained in the current folder.
2. Select Pause (to stop), Play (to resume), or
Options (to access more features).
With Options selected, your phone
automatically pauses the slideshow.
Move File is only available when you have a
memory card inserted.
Add Files to a Shuffle
1. From a media file list, highlight a file.
2. Select Options > Shuffle to add the file to
the applicable shuffle.
3. When you are done, select Options > Exit
.
View File Details
1. From a media file list, highlight a file.
2. Select Options > Details to view the details
such as file size or save date.
3. Select OK to exit.
38
Media File Options
Erase All Media Files
Erase Media Files
Erase a Single File
1. From a media file list, highlight a file.
2. Select Options > Erase > Yes
You can only erase unlocked files. Preloaded
files on your phone are always locked.
From Delete All, select Delete All > Yes to
erase all files in the Media Gallery folder.
Note: You can only erase unlocked files.
Preloaded files on your phone are always
locked.
.
Erase All Files in a Folder
From a media file list, select Options > Erase
All > Yes
.
Note: You can only erase unlocked files.
Preloaded files on your phone are always
locked.
Erase All Pictures
From Delete All, select Camera Pics Only >
Yes to erase all files in the Camera Pictures
folder.
Note: You can only erase unlocked files.
Erase All Image Files
From Delete All, select Images Only > Yes to
erase all files in the Images folder.
Note: You can only erase unlocked files.
Preloaded files on your phone are always
locked.
Erase All Sound Files
From Delete All, select Sounds Only > Yes to
erase all files in the Sounds folder.
Note: You can only erase unlocked files.
Preloaded files on your phone are always
locked.
User Guide
39
8
Messaging
Use Messaging to send, receive, and erase messages from your phone.
Messaging Menu
Select Messaging from the main menu to access the following functions:
Level 1 >
Level 2 >
Level 3
Messaging
New Text Msg
New Pic Msg
Voicemail
Inbox
Compose a text message.
Compose a multimedia message.
Shows how many voicemails are waiting.
Shows a list received text and multimedia messages.
Shows how many alerts are waiting.
Shows a list of messages you have successfully sent.
Shows a list of messages you have sent, but are pending or failed.
Shows a list of messages you have saved.
Browser Alerts
Sent Msgs
Outbox
Saved Msgs
Drafts
Shows a list of messages that have been started, but saved to be
completed at a later time.
Msg Settings
Access these options: Alerts
Auto Retrieve CC and BCC
Auto-Erase Default Text Text Msg Receipt
Voicemail Number, and Erase Recent List
,
Msg List View
Callback Number
Pic Msg Receipt
,
Signature, QuickText,
,
,
,
Save to Sent
,
,
,
,
,
.
Message Groups See a list of your message groups.
Erase Msgs
Access these options: Inbox
,
Outbox, Sent Msgs, Saved Msgs, Drafts,
and All
.
Message Count
See how much message space you have used.
Note: The menu items on your phone can change depending on the services provided by your service provider.
Check with your service provider.
40
Messaging Menu
You can message up to ten recipients at
once. Use comma or spaces to separate
addresses.
Send Messages
Create a Text Message
You can only send text messages to phone
numbers capable of receiving them or to email
addresses if supported.
2. Repeat the first step for CC and BCC , if
needed.
3. Enter a subject.
1. From New Text Msg, enter a recipient’s
phone number or email address. (Select
Options to access contacts, groups or
recently used addresses. Scroll down to
move to the next field when done.)
You can message up to ten recipients at
once. Use comma or spaces to separate
addresses.
4. Enter a message.
5. Attach an image file. (Select Options to
access more features.)
6. Attach a sound file. (Select Options to
access more features.)
7. When done, select Send
.
Receive Calls while Creating Messages
If you receive a call while creating a message a
notification appears. Do one of the following:
2. Enter the message. (Select Options to
access more features.)
•
Select Ignore to ignore the call and return to
the message screen.
Press the Send key to answer the call and
your phone automatically saves the message
3. When done, select Send
.
Create a Multimedia Message
•
You can only send multimedia messages to
phone numbers capable of receiving them or to
email addresses. When you reach the character
and file size limit for a single multimedia
message, you must edit the message to meet the
size limitation.
to Drafts
.
Enter Message Recipients
The following describes how to add recipients
to your messages, depending on the services
provided. Check with your service provider for
availability.
Note: Multimedia messaging is not available on
all phones. Check with your service provider.
1. From New Pic Msg, enter a recipient’s
phone number or email address. (Select
Options to access contacts, groups or
recently used addresses. Scroll down to
move to the next field when done.)
Add Recipients from Contacts
1. At the compose message screen, select
Options > Contacts when entering a phone
number or email address.
2. Select a contact from the contacts list.
3. Select a number or address.
4. Complete your message.
User Guide
41
Add Recipients from Recent List
Add Recipients from Message Text
1. At the compose message screen, select
Options > Recent List when entering a
phone number or email address.
2. Select a number or address.
1. At the compose message screen, select
Options > Add Address when entering the
text to add more recipients.
2. Enter a number or address to add.
3. Complete your message.
3. Complete your message.
Add Recipients from Recent Calls
Send Messages to Online Location
1. At the compose message screen, select
Options > Recent Calls when entering a
phone number or email address.
2. Select a number.
1. At the compose message screen, select
Options > Online Album when entering a
phone number or email address to upload
the message to your online photo album.
2. Complete your message.
3. Complete your message.
Save Messages to Drafts
Send to Groups
At the compose message screen, select Options
> Save Message when entering the text. Your
phone saves the message to Drafts for you to
complete at a later time.
1. At the compose message screen, select
Options > Message Groups when entering
a phone number or email address.
2. Select a group.
3. Complete your message.
Complete Messages in Drafts
•
From Drafts, highlight your desired
Save Recipients as Contacts
message.
1. At the compose message screen, select
Options > Save Address when entering a
phone number or email address.
•
•
Select Edit or Options > Edit.
Complete your message.
2. Select a number or address.
Use Preset Text
3. Select Options > Save New Contact (to
create a new contact) or Options > Add to
Contact (to add the number or address to an
existing contact).
Add Preset Text
1. At the compose message screen, select
Options > Insert QuickText when entering
the text.
2. Select a preset text entry.
3. Complete your message.
42
Send Messages
Save Messages as Preset Text
Add Sounds to Messages
1. At the compose message screen, select
Options > Save as QuickText when
entering the text to use it later as preset text.
2. Complete your message.
1. At the compose message screen, select
Options > Insert Sound when entering the
text.
2. Select a file.
3. Complete your message.
Save Received Messages as Preset Text
Add Contacts to Messages
When viewing a received message, select
Options > Save as QuickText to use it later as
preset text.
1. At the compose message screen, select
Options > Insert Contacts when entering
the text.
2. Select a contact from your contacts list.
3. Complete your message.
Attaching Files to Messages
The following describes how to select Options
to add various files to your messages when
entering the text, depending on the services
provided. Check with your service provider for
availability.
Add Slides to Messages
Use slides in a multimedia message to send
multiple files of the same type, such as pictures
or voice memos. A multimedia message may
have up to ten slides.
1. At the compose message screen, select
Options > Add New Slide when entering
the text.
Add Memos to Messages
1. At the compose message screen, select
Options > Insert Note when entering the
text.
2. Select a memo.
3. Complete your message.
2. Select a slide and add more files or text if
needed.
Add Pictures to Messages
To navigate through the slides, select
Options > Next Slide or Previous Slide. To
erase the current slide, select Options >
1. At the compose message screen, select
Options > Insert Picture when entering the
text.
Erase Slide
.
3. Complete your message.
2. Select a file.
You can only attach a limited number of files.
3. Complete your message.
User Guide
43
Add Media Files to Messages
Preview Messages
1. At the compose message screen, select
Options > Preview Message when entering
the message or media file.
1. At the compose message screen, select
Options > Media Gallery when adding a
media file.
2. Select a file to add to your message.
To remove a media file, select the applicable
option. For example, to remove a sound,
2. Do one of the following:
–
–
–
If the message has more than one slide,
select Next to view the next slide.
If the message has only one slide, select
Send to send message.
select Options > Remove Sound
.
3. Complete your message.
Select Options to access more features.
Take Pictures for Messages
Set Individual Message Settings
The following describes how to set message
settings for individual messages.
1. At the compose message screen, select
Options > Take a Picture when adding an
image.
Note: Your selection of each of the following
message settings overrides that selected for all
2. Take a picture.
3. Select it to add to your message.
4. Complete your message.
messages from Msg Settings
.
Request a Message Receipt
Record Sounds for Messages
1. When entering a message, select Options >
Msg Settings > Msg Receipt > Request to
request a message delivery notice.
1. At the compose message screen, select
Options > Record Sound when adding a
sound.
2. Complete your message.
2. Record a sound.
3. Select it to add to your message.
4. Complete your message.
Set Message Priority
1. When entering a message, select Options >
Msg Settings > Set Priority to set the
priority level.
2. Complete your message.
44
Send Messages
–
–
Scroll left or right to move between the
hour, minute, and AM/PM.
Scroll up or down to change the hour,
minute, and AM/PM.
Change the Callback Number
1. When entering the message, select Options
> Msg Settings > Callback Number
2. Enter your callback number and select OK
.
.
4. Select Next
5. Press the OK key to change the date.
.
3. Complete your message.
Send Messages Later
1. When entering a message, select Options >
–
–
Scroll left or right to move between the
month, day, and year.
Scroll up or down to change the month,
day, and year.
Msg Settings > Send Later
.
2. Select Immediate or Set Time to set a
specific time to send the message.
6. Select Done
.
3. Press the OK key to change the time.
7. Complete your message.
–
Scroll left or right to move between the
hour, minute, and AM/PM.
Scroll up or down to change the hour,
minute, and AM/PM.
Set the Slide Interval
1. When entering the message, select Options
–
> Msg Settings > Slide Interval
.
2. Select a time interval for the slides.
3. Complete your message.
4. Select Next
5. Press the OK key to change the date.
.
–
–
Scroll left or right to move between the
month, day, and year.
Scroll up or down to change the month,
day, and year.
Set CC and BCC Fields
1. When entering the message, select Options
> Msg Settings > CC & BCC to enable or
disable the CC and BCC address fields.
2. Complete your message.
6. Select Done
7. Complete your message. Your phone saves
the message and sends it later.
.
Set the Validity Period
1. When entering a message, select Options >
Msg Settings > Validity Period
.
2. Select Set Time to set how long to keep
your message valid before removing it from
the phone if not sent.
3. Press the OK key to change the time.
User Guide
45
Reply to Multimedia Messages
(with Prompt)
Handle Received Messages
Reply to Text Messages
When receiving a message, your phone displays
a notification and the message icon appears at
the top of your screen. The message icon flashes
with an urgent message alert if the message is
urgent.
1. When a message notification appears, select
Inbox (to view the message) or Ignore (to
clear the notification).
An icon appears at the top of your screen
when you have an unread message.
2. From Inbox, highlight a message and select
View > Reply (to compose your message)
or Options (to access more features).
When receiving a message in prompt mode,
your phone displays a notification showing a
new message is available for download.
1. At the download notification, select Yes (to
download the message) or Options (to
retrieve it later or erase it without
downloading).
2. At the message notification, select View (to
view the message) or Later (to check it
later).
3. Select Reply or Options > Reply if the
message has more than one slide.
Select Options to access more features.
4. Complete your message and select Send
Select Options to access more features.
.
3. Complete your message and select Send
.
Reply to Multimedia Messages
(with Auto Retrieve)
Forward Messages
1. When viewing a received message, select
When receiving a message in auto retrieve
Options > Forward
2. Enter a number or address.
3. Complete your message and select Send
.
mode, your phone automatically downloads it
with a notification.
.
Note: If receiving a message during a call, the
phone downloads the message after the call.
1. At a message notification, select View (to
view the message) or Later (to check it
later).
Reply to all Recipients
1. When viewing a received message, select
Options > Reply All to send your reply to
all the message recipients.
2. After viewing the message, select Reply or
Options > Reply if the message has more
than one slide.
2. Complete the message and select Send
.
Select Options to access more features.
3. Complete your message and select Send
.
46
Handle Received Messages
Reply with a Copy of the Message
Go to Web Addresses in Messages
When viewing a received message, select
Options > Launch Browser to go to a web
address included in the message.
1. When viewing a received message, select
Options > Reply with Copy
.
The original message appears in your reply
message.
Handle Attached Files
2. Complete your message and select Send
.
Play Attached Files
Call Sender
When viewing a received message with files
attached, select Options > Play (to play an
attached file), Stop (to stop playing), or Mute
(to turn off the sound).
When viewing a received message, select
Options > Call to call the sender.
Save Received Messages
When viewing a received message, select
Save Attached Files
Options > Save Message to save it to Saved
Msgs
When viewing a received message with files
attached, select the applicable save option to
save the attached files, including graphics,
sounds, contacts (vCard), or events (vCal). For
example, to save a contact, select Options >
.
View Recipients
When viewing a received message, select
Options > Recipients to check all recipients of
the message.
Save Contact
.
View Messages with Multiple Slides
View Sender Information
When viewing a received message containing
multiple slides, use the following options to
navigate through the slides.
When viewing a received message, select
Options > Sender to view an existing contact,
add to an existing contact, or create a new
contact depending on the sender.
•
•
Next to view the next slide.
Options > Replay to restart the message
from the beginning slide.
Lock Messages
When viewing a received message, select
Options > Lock Msg to protect it from
accidental deletion. To unlock the message,
•
•
•
Options > Pause to pause at the current
slide.
Options > Resume to resume playing the
slides.
select Options > Unlock Msg
.
Options > Done to exit the message.
Sort Messages in Inbox
1. From Inbox, select Options > Sort
.
2. Select a sort option.
User Guide
47
View Message Information
Check your Voicemail
When you receive a voicemail message, a
notification with a voicemail message icon
appears at the top of your screen.
When viewing a received message, select
Options > Message Info to view the message
priority, sent time, size, and so on.
•
At the voicemail notification, select Call to
call your voicemail number and follow the
system prompts to retrieve the message.
Select Ignore to clear the notification
without checking messages. The notification
icon remains on top of the screen until you
listen to the message.
Replay Messages
When viewing a received message, select
Options > Replay to restart the message
(including a slide or sound if contained) from
the beginning.
Use Voicemail
Configure your Voicemail
Before your phone can receive voicemail
messages, you need to set up a password and
record a personal greeting with your service
provider.
•
When only the voicemail message icon
appears on top of the screen, select
Voicemail and follow the system prompts to
retrieve the message.
Handle Sent Messages
When you have set up your voicemail, all
unanswered calls to your phone are
automatically transferred to voicemail, even if
your phone is in use or turned off.
1. Press and hold the 1 key.
Check Message Status in Sent Folder
Use the following symbols to check the Sent
folder for the status of messages successfully
sent.
The scheduled message will be sent at the
scheduled time. You cannot cancel delivery
of the message.
2. Follow the system prompts to create a
password and record a greeting.
The message was sent. You cannot cancel
delivery of the message.
The message has been received.
The message has been sent to more than one
recipient.
48
Use Voicemail
Check Message Status in Outbox
Use the following symbols to check your
Outbox for the status of messages sent but still
in process.
Message Settings
The following message settings affect all
messages unless you change them for individual
messages.
The message is pending and will be sent
when possible. You can cancel delivery of
the message.
Set Message Alerts
1. From Alerts, select Msg Alert
.
2. Select an alert for messages.
The message cannot be sent because service
is not available. An alert appears on your
phone if the message cannot be sent.
If you select an & Remind alert, the phone
notifies you once when receiving a new
message and notifies you again every five
minutes. To stop a reminder alert, select Ignore
.
.
.
Unable to Send Messages
You may not be able to send or receive
messages if your phone’s memory is nearly full,
or if digital service is not available at the time.
To free up memory, erase old messages. See
Set Page Alerts
1. From Alerts, select Page Alert
.
2. Select an alert for pages.
If you select an & Remind alert, the phone
notifies you once when receiving a new
message and notifies you again every five
minutes. To stop a reminder alert, select Ignore
Handle Browser Alerts
1. From Browser Alerts, select an alert.
2. Select Connect to launch the browser.
Set Voicemail Alerts
1. From Alerts, select Voicemail Alert
2. Select an alert for voicemails.
If you select an & Remind alert, the phone
notifies you once when receiving a new
message and notifies you again every five
minutes. To stop a reminder alert, select Ignore
.
User Guide
49
Set Message List View
From Msg List View, select one of the
following to set your message list display:
Enable Auto Retrieve
From Auto Retrieve, select one of the
following:
•
•
•
•
Sender & Preview displays the sender and
first part of messages.
Sender & Date-Time displays the sender
and sent time of messages.
Msg Preview displays the first part of
messages.
Sender displays the message sender.
•
Disabled turns off auto retrieve and prompts
you before downloading any multimedia
messages.
Enabled turns on auto retrieve to
automatically download multimedia
messages.
•
Enable CC/BCC Fields
From CC and BCC, select Disabled (to hide
the CC and BCC fields) or Enabled (to show
them).
Set your Signature
You can create a signature to appear at the end
of all outgoing messages.
1. From Signature, enter your signature.
2. Select OK to save the signature.
Note: The signature counts towards the
character limit of your message.
Set Callback Number
1. From Callback Number, enter a new
number to change your default callback
number.
2. Select OK to save the number.
Edit Preset Messages
Your phone comes with preset messages, such
as “Please call me,” which you can insert into
the body of a text message. You can edit or
create up to 40 preset messages.
Enable Save to Sent
From Save to Sent, select Enabled to
automatically save outgoing messages to the
Sent Msgs folder.
1. From QuickText, do one of the following:
–
Scroll to a preset message and select
Edit
.
–
Select New Msg to create a new preset
message.
2. Enter or edit the text.
3. Select Save
.
Note: You can also save messages you have
written or received as preset messages.
50
Message Settings
Enable Auto-Erase
Set your Voicemail Number
Often your service provider automatically
programs your voicemail number (the number
your phone calls to retrieve voicemail). To
change it:
Use Auto-Erase to set your phone to erase
messages automatically when it needs memory
for incoming messages.
From Auto-Erase, select one of the following:
•
•
Disabled erases no messages.
Inbox Msgs erases old messages in Inbox
when memory is needed.
Sent Msgs erases old messages in Sent
Msgs when memory is needed.
Both erases old messages in both Inbox and
Sent Msgs when memory is needed.
1. From Voicemail Number, select Edit.
2. Enter your voicemail number. (Use Options
> Time Pause or Hard Pause to enter
pauses.)
•
•
3. Select Save
.
Erase Recent List
From Erase Recent List, select Yes to clear the
list of recipients you have recently sent
messages to.
Set Default Text
You can change the default text entry mode
when creating a text message. This setting
applies only to the Message field, not the Send
To field.
From Default Text, select Normal Alpha (to
enter text letter by letter) or Rapid Mode (to
enter text with word recognition).
Request Text Message Receipts
From Text Msg Receipt, select Request to
request a notification when a recipient has
received your text message.
Request Multimedia Message Receipts
From Pic Msg Receipt, select Request to
request a notification when a recipient has
received your multimedia message.
User Guide
51
2. Select Options > Send Pic Msg
3. Complete your multimedia message and
select Send
.
Message Groups
You can create groups for messaging.
.
View Message Groups List
1. From Message Groups, view your
preloaded groups, followed by the custom
groups you have created.
2. Highlight a group and do one of the
following:
Add Contacts to Message Groups
1. From Message Groups, highlight a group.
2. Select Options > Edit
.
3. If you are modifying a group you created,
select Next. Otherwise, go to the next step.
4. Select contacts from the list provided. A
checkmark appears next to each contact in
the group. Press the the OK key to add or
remove checkmarks.
–
Press the OK key to view the groups
details.
–
–
Select New to create a new group.
Select Options to access more functions.
5. When finished, select Done
.
Create a New Message Group
Assign Message Tone to
Message Group
1. From Message Groups, select a group.
2. At the groups details screen, scroll to the
group name.
1. From Message Groups, select New
.
2. Enter a name for the group and select Next
3. Select contacts from the list provided. A
check mark appears next to each selection.
You can also remove checkmarks.
.
4. When finished, select Done
Your new group appears the next time you view
your groups list.
.
3. Select Options > Msg Tone > Assign Msg
Tone and a ringer from the list. Scroll to
play the ringers.
Send a Message Group vCard
Send Text Messages to Message
Groups
1. From Message Groups, highlight a group.
2. Select Options > Send as vCard > Via
1. From Message Groups, highlight a group.
Bluetooth
.
2. Select Options > Send Text Msg
3. Complete your text message and select
Send
.
3. Complete the appropriate task to send the
contact information.
.
Erase a Message Group
Send Multimedia Messages to
Message Groups
1. From Message Groups, highlight a group.
1. From Message Groups, highlight a group.
2. Select Options > Erase > Yes
.
52
Message Groups
Erase Messages
Erasing old messages frees up memory in your
phone. You can erase messages as you send or
read them, erase them one at a time, or erase
them all at once.
Erase a Single Message
When viewing a received message, select
Options > Erase > Yes
.
Note: You can erase a scheduled message, but
cannot cancel its delivery.
Erase Messages from a Folder
From Erase Msgs, select a folder to erase
messages from. For example, to erase received
messages, select Inbox > Yes
.
Note: You cannot recover deleted information.
Erase All Messages
From Erase Msgs, select All > Yes to erase all
messages from all folders, except for voicemail
messages.
Note: You cannot recover deleted information.
Check Message Count
From Message Count screen, check how many
messages you have stored.
User Guide
53
9
Tools & Games
Tools & Games Menu
Select Tools & Games from the main menu to access the following functions:
Level 1 >
Level 2 >
Level 3
Tools & Games
Brick Attack
Voice Memo
Play Brick Attack.
Access these options: Record New and Recorded
Memos
.
Scheduler
Access these options: Add New Event
,
View Month,
View Day Go to Date View All Events, and Settings
,
,
Alarm Clock
Tip Calculator
Calculator
Timer
Set an alarm.
Calculate a tip.
Perform basic calculations.
Set a countdown timer.
Stopwatch
Memopad
World Clock
Use a stopwatch timer.
Access these options: New Memo and View Memos
.
View times from different time zones.
–
Use the Navigation key to move the
paddle.
Press the Back key to pause the game.
Select Resume to restart the game.
Play Brick Attack
The goal of this game is to eliminate bricks
arranged in levels. You send a moving ball
upward using a paddle at the bottom of the
screen.
–
–
–
Select Options
>
Exit to exit the game.
1. Select Brick Attack
.
Voice Memo
2. You may see a notification, select Yes or No
3. Select New to start the game. You have the
following options:
.
Use Voice Memo to record and play back audio
memos.
54
Tools & Games Menu
–
–
Scroll left or right to move between
hour, minute, and AM/PM fields.
Scroll up or down to change hour,
minute, and AM/PM.
Record Voice Memos
1. From Voice Memo, select Record New
2. Record your voice memo and select Stop
when done.
.
Press the OK key to save and move to the
next field.
5. Press the OK key to change the duration, if
3. Select Save
.
If you receive an incoming call while recording
a memo, the memo is saved and the incoming
call screen appears.
needed.
–
–
Scroll left or right to move between hour
and minute fields.
Scroll up or down to change hour and
minute.
Play Voice Memos
1. From Recorded Memos, highlight a memo.
2. Select Play to play the memo or Options to
access more features.
Press the OK key to save and move to the
next field.
6. Press the OK key to select a priority from
the list.
7. Press the OK key to select a reminder from
the list.
Scheduler
Use Scheduler to schedule events and set
reminder alerts.
Create an Event
8. Press the OK key to select a reminder sound
from the list.
9. Press the OK key to select During Event to
enable silent mode or Off to have normal
sounds.
1. From Add New Event, enter a name. Scroll
down to move to the next field when done.
2. Press the OK key to select an event type
from the list.
3. Press the OK key to change the date, if
needed.
10. Press the OK key to select a recurring event
from the list, if needed.
–
Scroll left or right to move between
month, day, and year fields.
Scroll up or down to change month, day,
and year.
11. Select Save
.
View Events
–
View Events by Month
Press the OK key to save and move to the
next field.
1. From View Month, scroll through the
month view. (Days with events are
highlighted.)
4. Press the OK key to change the time, if
needed.
2. Press the OK key to select a date.
User Guide
55
3. Do one of the following:
Sort Events by Type
From View All Events, select Options > Sort
by Type to sort events by their assigned type.
–
Scroll left or right to move to another
date.
–
–
Select an event.
Scroll to a time and select Add New to
create a new event.
Sort Events by Priority
From View All Events, select Options > Sort
by Priority to sort events by their assigned
priority.
–
Select Options to access more features.
View Events by Date
Modify Events
From View Day, do one of the following:
•
•
•
Scroll left or right to move to another date.
Select an event.
Scroll to a time and select Add New to
create a new event.
Edit an Event
1. From View Day, select an event.
2. At the event details screen, select Options >
Edit
.
•
Select Options to access more features.
3. Modify the event and select Save
.
Go to a Specific Date
Send an Event
1. From View Day, select an event.
2. At the event details screen, select Options >
Send > Via MMS Msg (to attach the file to
a multimedia message), Via Bluetooth (to
send the file to a Bluetooth-enabled device),
or To Printer (to print the file on a
1. From Go to Date, scroll left or right to
move between month, day, and year fields.
Scroll up or down to change month, day, or
year.
2. Press the OK key to select the date.
View Events by List
From View All Events, select an event from the
list or Options to access more features.
Bluetooth-enabled device).
3. Complete the appropriate task.
Note: If your phone has no Bluetooth feature,
you may only send the file with a message.
Return to the Current Date
From View Day, select Options > Go to Today
to return to the current date.
Copy an Event
1. From View Day, select an event.
2. At the event details screen, select Options >
Sort Events by Time
From View All Events, select Options > Sort
by Time to sort events by time.
Copy
.
3. Enter a new name for the event.
4. Complete the event and select Save
.
56
Scheduler
Erase Events
Change Scheduler Settings
From Settings, you can modify the following
features.
Erase an Event
1. From View Day, select an event.
Set Scheduler Hours
2. At the event details screen, select Options >
Erase > Yes
.
1. From Scheduler Hours, modify the start
and end times.
Erase the Current Day’s Events
–
–
Scroll left or right to move between
hour, minute, and AM/PM fields.
Scroll up or down to change hour,
minute, and AM/PM.
From View Day, select Options > Erase
Today’s Events > Yes to erase all events on that
day.
2. Select Save when done.
Erase All Events
From View All Events, select Options > Erase
All Events > Yes to erase all events from the
phone.
Erase Events Automatically
From Auto Erase, select an option from the list
to set when to automatically erase your past
events.
Note: You cannot recover deleted information.
Erase All Past Events
Set Event Priority
From Priority, select an option to set every
event you create with this priority type.
From View All Events, select Options > Erase
All Past Events > Yes to erase all past events
from the phone.
Set Event Reminder
From Reminder, select an option to set every
Note: You cannot recover deleted information.
event you create with this reminder setting.
Set Event Reminder Alert
From Reminder Sound, select an option to set
every event you create with this reminder alert.
(Scroll to listen to sounds).
Set Event Silent Mode
From Silent Mode, select an option to set every
event you create with this silent mode.
User Guide
57
Set the Quick Alarm
Alarm Clock
1. From Alarm Clock, scroll to the quick
You can set up to four alerts with your phone’s
three alarm clocks and one quick alarm.
alarm and select Set
.
2. Choose a time. (A notification shows the
quick alarm is on.)
When the quick alarm rings, select Off to turn
off the alarm, or Reset to set the quick alarm
again.
Note: The alert occurs only if the phone is on.
Set an Alarm
1. From Alarm Clock, scroll to one of the
alarms and select Set
.
2. Press the OK key to change the time, if
needed.
Use Tip Calculator
–
Scroll left or right to move between
hour, minute and AM/PM fields.
Scroll up or down to change hour,
minute and AM/PM.
1. From Tip Calculator, enter the amount of
your bill.
–
2. Scroll down to select the percentage you
want to tip.
Press the OK key to save time and move to
the next field.
The total bill with tip is displayed. If you are
finished, select Done. Otherwise, go on to
the next step.
3. Press the OK key to select a sound from the
list.
4. Press the OK key to select a recurring alarm
from the list, if needed.
5. Press the OK key to enter a note.
6. Select Save
When the alarm rings, select Stop to turn off the
alarm or Snooze to set the alarm to ring in
another ten minutes.
3. Scroll down to enter the number of people
sharing the bill (or enter 1 if paying the
entire bill).
4. Select Next to view the final bill.
5. Select Done when finished.
.
58
Alarm Clock
Use Calculator
Use Timer
1. From Calculator, enter the first number.
2. Select a mathematical operation:
The timer counts down for the specified time. It
beeps when that amount of time has elapsed.
–
–
–
–
Scroll left to multiply.
Scroll right to divide.
Scroll up to add.
1. From Timer, select Set.
2. Enter the time length.
–
Scroll left or right to move between
hours, minutes, or seconds fields.
Scroll up or down to change hours,
minutes, or seconds.
Scroll down to subtract.
Your selection will appear highlighted.
3. Enter the second number, and press the OK
key to view the result.
4. Select Exit to return to the menu, or
Options and one of the following:
–
3. Select Sound, and choose from the list to
modify the sound.
4. To work the timer, select from the following
options:
–
MS clears value currently stored and
adds the displayed result to value stored
in memory.
M+ adds displayed result to the value
stored in memory.
MR displays currently stored value on
the screen.
MC clears value currently stored in
memory.
–
–
–
Start begins the countdown.
Stop pauses the countdown.
Reset clears the timer.
–
–
–
When the countdown is complete, select Off to
silence the alarm.
Use Stopwatch
From Stopwatch, select from the following
options:
•
•
•
Start begins counting.
Stop pauses counting.
Reset clears the stopwatch.
Press the Back key to exit.
User Guide
59
Erase a Memo
Memopad
Write a Memo
1. From New Memo, enter the memo.
1. From View Memos, highlight a memo.
2. Select Options > Erase > Yes
.
Erase All Memos
2. Select Save
.
From View Memos, select Options > Erase All
View a Memo
From View Memos, select View to open a
memo or Options to access more features.
> Yes
.
Note: Selecting Erase All only erases unlocked
memos.
Edit a Memo
World Clock
1. From View Memos, highlight a memo.
Use World Clock to check times in cities
2. Select Options > Edit
3. Edit the memo, and select Save
.
around the world in relation to your local time.
.
Set World Clock
Send a Memo
1. From World Clock, first scroll left or right
to select a time zone.
1. From View Memos, highlight a memo.
2. Select Options > Send as SMS
3. Complete the message, and select Send
.
2. Check your local time and date on the first
line, followed by your selected world city
and its time and date.
.
Call a Number in a Memo
If you have a phone number in a memo, you can
call it.
1. From View Memos, highlight a memo.
2. Select Options > Use Number
Search World Clock
1. From World Clock, select Options >
Search City or Search Country
2. Enter the first letter(s) of your desired city or
country.
.
.
3. Select a number, and press the Send key.
3. Select a city or country from the list.
Lock a Memo
You can lock a memo to prevent it from being
edited or erased.
1. From View Memos, highlight a memo.
2. Select Options > Lock Memo
.
To unlock a memo, select Unlock Memo
.
60
Memopad
10 Browser
You can use your phone to browse the Internet
if you have obtained phone Internet services
from your service provider and if over-the-air
Internet access is available in your area.
Add a Bookmark
1. Surf to the Web page you want to bookmark
and select Options > Add to Bookmarks
2. Edit the bookmark's details, if needed.
3. Select Options > Save to save the
bookmark.
To access your saved bookmarks, select
Options > Bookmarks from any web page.
.
Launch Browser
Select Browser to launch the browser. An alert
appears notifying of airtime fees, if you have
enabled web alerts. Select OK to continue.
If this is the first time you have connected to the
Internet, a message informs you that security is
not yet enabled for your browser. Select Yes to
enable security.
Browse the Web
A browser home page with a list of bookmarks
and some browser menu options appear when
you are connected to the Web. The lock icon
appears in a secure session. You can do the
following:
•
To choose a site, scroll to the link and press
the OK key.
•
An underline and an arrow indicate that
there is more text. Scroll down to view the
rest of the text.
•
Press the Back key to return to the previous
screen.
•
•
Press the End key to exit.
Select Options to access more browser
features.
User Guide
61
11 Music Player
Use Music Player to play and manage media
4. From your phone’s main menu, select
files.
Settings > USB Mode > Mass Storage
5. On your computer, you will see your phone
as a removable disk drive.
6. Open the removable disk drive.
7. Open the My Music folder on the memory
card.
.
Play a Song
1. From the home screen, select Menu >
Music Player
2. At the song list, scroll to a song.
.
8. Drag and drop music files to the My Music
folder.
3. Select Play to play the song or Options to
access more functions.
9. When you are done transferring files,
disconnect your phone from your computer.
You can also access the Music Player from the
home screen by pressing the Play/Pause twice.
Search for a Song
Load a Song
1. From Music Player, select Options >
Music files can be loaded onto your phone via
the browser or a message. You can also use the
following steps to load music from your
computer via a microUSB cable.
Music Library
.
2. Select All Songs and enter the first letter(s)
of the name of your desired song to search
for it. The search letters you enter are not
case sensitive. You can also scroll through
the song list.
Note: The Music Player will read music saved
in MP3 file format only (other file formats are
not supported).
Note: You can sort your songs in various ways.
For example, to sort songs by artist, choose By
1. Insert a memory card into your phone. You
must have a memory card to load music via
a microUSB cable.
Artist instead of All Songs
.
3. Select Play to play the song or Options to
2. Connect the microUSB cable to the
microUSB jack on your phone.
access more functions.
3. Connect the microUSB cable to the USB
port on your computer.
Note: You do not have to install any additional
software when using the phone in Mass Storage
mode.
Repeat a Song
To place the song your are currently playing
into a playback loop, select Options > Repeat
Track ON
.
62
Play a Song
View Song Details
Access a Playlist
To view the details of the song your are
1. From Music Player, select Options >
currently playing, select Options > Details
.
Music Library > Playlists.
2. Choose a playlist.
Work with Songs
3. Select Play to start the playlist or Options to
access more functions.
1. From Music Player, select Options >
Music Library
.
Music Player Settings
2. Select All Songs or other song list.
3. Scroll to a song and select Options to access
functions such as locking or assigning the
file.
For more information, see “Media File Options”
From Music Player, select Options > Settings
to adjust the following features.
Enable Repeat
To play your tracks continuously in a loop, from
Repeat, select Enable
.
Note: Once enabled, your phone keeps playing
the tracks unless you stop it.
Create a Playlist
1. From Music Player, select Options >
Music Library
2. Scroll to Playlists and select Options >
Create New
3. Enter a name for the playlist and select
Save
.
Enable Shuffle
To randomly play each of your tracks once,
.
from Shuffle, select Enable
Note: Shuffle, even if enabled, only works
when you have three or more tracks to play.
.
.
4. Select All Songs or other song list.
5. Scroll through the list and select songs. A
checkmark appears next to each selection.
You can also remove checkmarks.
Enable Do Not Disturb
To stop receiving incoming calls and most of
the alarms and alerts, from Do Not Disturb
select Enable. When enabled, you can still
make a call or send a message.
,
6. Select Done, when complete.
Note: Once you exit Music Player, your phone
automatically disables Do Not Disturb
,
showing all alarms and alerts received with Do
Not Disturb enabled at the main screen.
User Guide
63
Set Auto Off Duration
Use Auto off to set the duration for which your
phone is paused or stopped before automatically
turning off Music Player. From Auto off, select
one of the following:
•
•
•
10 Minutes automatically turns off Music
Player after the phone pauses or stops for 10
minutes.
20 Minutes automatically turns off Music
Player after the phone pauses or stops for 20
minutes.
Off never automatically turns off Music
Player
.
Enable Bluetooth Headset
Use BT Headset to pair your Bluetooth device
with Music Player. Refer to “Pair with a
Device” on page 66 for more information.
64
Music Player Settings
12 Settings
Settings Menu
Select Settings from the main menu to access the following functions:
Level 1 >
Settings
Level 2 >
Bluetooth
Sounds
Level 3
Access these options: On/Off
,
My Devices, and Settings
.
Access these options: Ringers
Sounds
,
Ringer Mode Volume Slide
,
,
,
Pwr On/Off Sound, and Keypad
.
Display
Access these options: Set Wallpaper Wallpaper Shuffle Set
,
,
Screensaver Themes Main Menu View My Banner
,
,
,
,
Backlighting Brightness Language, and Time/Date Format.
,
,
Convenience
Access these options: Set Time/Date (with Airplane Mode enabled),
Airplane Mode
Answer Hold Fast Find
Call Alert Any Key Answer, and Customize Keys
,
Auto Keyguard
,
Auto-Hyphen
,
1-Touch Dialing
,
,
,
Frequent List
,
Minute Alert,
Missed
,
.
Voice Features
Accessories
Access these options: Automatic Add, Expert Mode, Display
Results Digit Lengths Voice Answer, and Voice Training.
,
,
Access these options: Headset Sounds Auto-Answer Memory
,
,
Card Com Port Speed TTY Device, and T-coil Hearing Aid.
,
,
USB Mode
Network
Set your data connection.
Access these options: Privacy Alert
,
Voice Privacy
,
Roam/Svc
Alert Roam Option Set Phone Line
,
,
,
Location Web Alert, and
,
Roam Call Alert
.
Security
Access these options: Lock Phone
,
Limit Calls
,
Erase Contacts,
and New Lock Code
.
Phone Info
Access these options: Build Info
,
Icon Key, and User Guide.
User Guide
65
3. At the device list, highlight a device and
select Add
Accept the pairing if prompted.
4. If necessary, enter the password provided
with the Bluetooth device and select OK
With the password accepted, the device appears
in your device list.
Bluetooth
.
The Bluetooth® wireless technology (not
available on all phones) enables wireless
connectivity with accessories such as portable
or installed hands-free car kits, headsets,
handsets, computers, and so on. For details,
check with your service provider.
.
You must use a Bluetooth device (compatible
with Class 2 Bluetooth wireless technology,
version 1.2) in order to use this phone
wirelessly. Bluetooth accessories display a
symbol on your phone.
Use Bluetooth Devices
Connect to a Device
Before you can use Bluetooth, you must get
your phone ready to communicate with a
device, called “connecting.”
To connect your phone to a Bluetooth device,
from My Devices, highlight a device and select
Enable Bluetooth
Before you can connect your phone with a
Bluetooth device, you need to enable the
Bluetooth feature on your phone.
Connect
.
A notification appears confirming the
connection. You can now use the device with
your phone.
From Settings, select On/Off > On
.
Pair with a Device
To enable your phone to communicate with a
Bluetooth device, you need to "pair" the device
with your phone. The following instructions
describe the process. You may also need to
reference the user guide provided with your
Bluetooth device.
1. Prepare the Bluetooth device (accessory) for
pairing as described in the device’s user
guide.
Disconnect from a Device
From My Devices, highlight a connected device
and select Disconnect
.
Rename a Device
1. From My Devices, highlight a device.
2. Select Options > Rename
3. Enter a new name and select Save
.
.
Delete a Device
You can delete a Bluetooth device that you have
paired your phone with.
1. From My Devices, highlight a device.
2. Select Options > Delete > Yes
2. From My Devices, select Find New. Your
phone then searches and detects any
available Bluetooth devices in the vicinity.
You must enable the Bluetooth feature on
your phone.
.
66
Bluetooth
View Device Services
Enable OBEX Authentication
A Bluetooth device paired with your phone may
have more than one service profile (such as
Headset, Handsfree, and so on). Do the
following to check the services available:
1. From My Devices, highlight a device.
From OBEX Authentication, select Enabled
With object exchange (OBEX) authentication
enabled, you need a user name and password to
transfer files via Bluetooth.
.
2. Select Options > Services
3. At the service list, highlight a profile and
.
Sounds
Your phone has several settings that control the
sound. You can select from a variety of ringers
and adjust the volume.
select Connect to change the active profile.
Change Bluetooth Settings
From Settings, you can modify the following
Bluetooth features.
Ringers
From Ringers, you can modify the following
settings.
Change Phone’s Name
Set Ringers
From Ringer Type, select a ringer. (Scroll
down the list to play the ringers.)
You can change the name presented for other
Bluetooth devices’ search of your phone.
From My Name, enter a new name and select
Save
.
Enable Roam Ringer
From Roam Ringer, select Enabled to activate
Limit Visibility
By default your phone is always visible, if set to
visible mode. You can limit the time your phone
is visible to other Bluetooth devices.
a specific ringer for roaming calls.
Ringer Shuffle
– Enable Ringer Shuffle
From Ringer Shuffle, select Enable to turn on
the ringer shuffle.
From Visible Duration, select an option to set
the phone visible for your selected time before
becoming invisible.
– Edit Ringer Shuffle
1. From Ringer Shuffle, select Edit
2. Select Add (to include the file in the shuffle)
or Remove (to remove the file from the
shuffle).
View Supported Services
Select Services to view a list of the Bluetooth
service profiles your phone supports.
.
3. When finished, select Options > Done
.
User Guide
67
– View Ringer Shuffle
Volume
1. From Ringer Shuffle, select View. Only the
files used in your shuffle appear.
2. Select Edit to modify the shuffle list or
press the Back key to exit.
From Volume, you can modify the following
settings.
Set Ringer Volume
1. From Ringer Volume, scroll right or left to
set the ringer volume.
Set Ringer Mode
Your phone is set to make sounds when you
receive calls, press keys, navigate through
menus, and receive alerts (such as new
messages). You can silence all sounds and set
the phone to vibrate or light up when you
receive calls and alerts.
2. Press the OK key to save.
Set Speakerphone Volume
1. From Spkrphone Volume, scroll right or
left to set the speakerphone volume.
2. Press the OK key to save.
From Ringer Mode, select one of the
following:
Set Earpiece Volume
1. From Earpiece Volume, scroll right or left
to set the earpiece volume.
•
Normal Sounds rings for the incoming call
or alert (in effect, returning the phone to a
non-silent mode).
2. Press the OK key to save.
•
•
Vibrate Only vibrates for the duration of
the incoming call or other alerts.
Vibe Then Ring vibrates for the first ten
seconds and then rings for the remainder of
the incoming call alert.
Set Keypad Volume
1. From Key Volume, scroll right or left to set
the keypad volume.
2. Press the OK key to save.
•
Lights Only lights up for the duration of the
incoming call or other alerts.
Set Slide Sounds
1. From Slide Sounds, select Slide Open or
You can also press and hold the Space key to
toggle between Vibrate Only mode and
Normal Sounds mode.
Note: The phone rings when attached to an
external power source (such as a charger), even
if all sounds have been silenced.
Slide Close
.
2. Select a sound. (Scroll down the list to play
the sounds.)
68
Sounds
Set Power On/Off Sounds
Wallpaper Shuffle
1. From Pwr On/Off Sound, select Power On
Enable Wallpaper Shuffle
From Wallpaper Shuffle, select Enable to turn
on wallpaper shuffle.
Sound or Power Off Sound
.
2. Select a sound to play when your phone
powers on or off. (Scroll down the list to
play the sounds.)
Edit Wallpaper Shuffle
1. From Wallpaper Shuffle, select Edit
.
Keypad
2. Select Add (to include a file in the shuffle)
or Remove (to remove a file from the
shuffle).
From Keypad, you can modify the following
settings.
Set Key Press Sounds
3. When finished, select Options > Done
.
From Key Sounds, select Tone Click, or Off
to set the sounds you hear when pressing the
keypad.
,
View Wallpaper Shuffle
1. From Wallpaper Shuffle, select View. The
files in your shuffle appear.
2. Select Edit to modify the shuffle list or
press the Back key to exit.
Set Key Tone Length
From Key Length, select Normal or Long to
set the length of the keypad tone.
Set Wallpaper Shuffle Interval
1. From Wallpaper Shuffle, select Set Shuffle
Display
Time
.
Set Wallpaper
You can select a wallpaper for your phone’s
home screen.
2. Select an interval time from the list. Your
wallpaper changes to another file in the
shuffle at the selected interval time.
1. From Set Wallpaper, select Camera
Pictures
,
Saved Images, or Wallpapers.
To turn off wallpaper, select None
.
2. Select a file. You may need to resize or crop
the file.
3. Select Done
.
User Guide
69
3. Enter your new text (up to 14 characters) or
Set Screensaver
press the Space key for a blank banner.
Screensavers appear on the home screen,
activated ten seconds after the last keypress.
Incoming calls and alerts override the
screensavers.
4. Select Save
.
Backlighting
1. From Set Screensaver, select Camera
Set Display Duration
From Backlighting, select Display Duration
and one of the following:
Pictures
,
Saved Images, or Screensavers.
To turn off screensaver, select None
.
2. Select a file. You may need to resize or crop
the file.
•
•
Always Dim forces the backlight to remain
dim before turning off.
7 Seconds 10 Seconds, 15 Seconds, or 30
,
3. Select Done
.
Seconds turns backlighting on for the set
time after your last keypress.
Always Bright forces the backlight to
remain bright before turning off.
Set Theme
From Themes, select a color theme for the
•
display background.
Set Main Menu View
From Main Menu View, select one of the
following:
Set Keypad Duration
From Backlighting, select Keypad Duration
and one of the following:
•
Grid displays icons of each menu item, with
its name at the top of the screen.
•
•
Always Off forces the backlight to remain
dim before turning off.
•
List displays a list of all menu items.
7 Seconds 10 Seconds, 15 Seconds, or 30
,
The next time you view the Menu, your
selected menu style appears.
Seconds turns backlighting on for the set
time after your last keypress.
•
Always Bright forces the backlight to
remain bright before turning off.
Set Greeting Banner
The banner is the personal label for your phone,
appearing on the home screen above the time
and date.
Set Brightness
1. From Brightness, scroll to change the
brightness level.
1. From My Banner, select Edit
.
2. Select Save
.
2. Press the Back key to clear the current
banner.
Set Language
From Language, select a language.
70
Display
calls, send text messages, use the Browser or
Bluetooth, but you can play games, use the
Scheduler, set the clock, and make emergency
calls to designated emergency numbers. Please
check with uniformed personnel before
operating your phone in Airplane mode.
From Airplane Mode, select Enabled > OK to
activate airplane mode.
Set Time and Date Format
From Time/Date Format, select a time and
date format.
Convenience
Use these settings to make your phone more
convenient to use.
With airplane mode enabled, you can also set
the time and date manually.
Set Date and Time
In Airplane mode, you can set the time and date
manually.
Auto Keyguard
Note: You can only access Set Time/Date with
Airplane Mode enabled.
Enable Auto Keyguard
1. From Set Time/Date, do the following to
change the date:
Use Auto Keyguard to automatically lock the
keypad after 30 seconds of inactivity to prevent
accidental key presses.
From Auto Keyguard, select Enabled or from
the home screen, press and hold the Back key.
–
Scroll left or right to move between the
month, day, and year fields.
Scroll up or down to change the month,
day, and year.
–
Unlock Keyguard
From the home screen, select Unlock and press
the OK key to unlock the keypad.
2. Press the OK key to save the date.
3. Do the following to change the time:
–
Scroll left or right to move between the
hour, minute, and AM/PM fields.
Scroll up or down to change the hour,
minute, and AM/PM.
Enable Auto-Hyphenation
–
Auto-hyphenation, when enabled, automatically
inserts hyphens into your phone numbers to be
consistent with the U.S. dialing plan (or the
North American Numbering Plan).
4. Press the OK key to save the time.
5. Select Done
.
From Auto-Hyphen, select Enabled to turn on
auto-hyphenation.
Enable Airplane Mode
While in an airplane, it is normally required that
you turn off your mobile phone because it emits
RF signals that interfere with air traffic control.
In airplane mode, however, your phone does not
emit RF signals. You cannot make or receive
User Guide
71
Place a Call on Hold
Use 1-Touch Dialing
The 1-Touch Dialing feature is the fastest way
to call a speed dial location. To call a contact
with speed dial, press and hold the speed dialing
location.
If it is a two-digit location, press the first digit
briefly, then press and hold the second digit.
Note: To use 1-Touch dialing, you must enable
1-Touch dialing on your phone and have a
speed dial location assigned to a contact.
From 1-Touch Dialing, select Enabled to turn
on 1-touch dialing.
You can place a call on hold with Answer Hold
enabled.
Note: If you are already on a call and you
receive another call, you cannot place the
incoming call on hold. With no call waiting
enabled, the call goes to Voicemail
.
When a call comes in, do the following:
1. Select Options > Answer Hold to place the
caller on hold with your recorded hold
message.
2. Select Answer to speak to the caller on hold
or End Call to hang up without speaking.
Answer Hold
Change Hold Call Message
1. From Answer Hold, select Re-Record
Enable Hold Call
Use Answer Hold to place incoming calls on
hold until you are ready to answer them.
Msg
.
2. Record the message twice, as prompted.
3. Select Save to save the message or Options
and one of the following:
1. From Answer Hold, select Enabled
.
If you have not recorded a hold message,
you need to record one, such as “Please
hold. I’ll answer in a minute.”
–
–
Play to replay your message.
Re-Record to record your message
again.
2. Record the message twice, as prompted.
3. Select Save or Options and one of the
following:
–
Exit to exit.
Call Contact using Fast Find
1. From Fast Find, select Enabled to turn on
fast find.
–
–
Play to replay your message.
Re-Record to record your message
again.
–
Exit to exit.
2. From the home screen, press the keys
corresponding to the letters of the name you
want to find. A matching contact or speed
dial entry appears.
The next time a call comes in, you can place it
on hold.
3. Scroll to your desired contact and press the
Send key to call the number.
72
Convenience
Enable Frequent List
Create a Custom Menu
From Frequent List, select Enabled. With
Frequent List enabled, the last 15 of your most
frequently called contacts appear at the
beginning of your contacts list. Scroll past the
double line to view the entire contacts list.
1. From the home screen, scroll up and hold.
2. Select Edit
.
3. Select features from the list provided. A
check mark appears next to each selection.
You can also remove checkmarks.
4. Select Save after selecting all your options.
Your new selections appear the next time you
select your custom menu.
Enable Minute Alert
From Minute Alert, select Enabled. Your
phone alerts you with a short beep ten seconds
before each minute passes during a call.
Voice Features
Set Missed Call Alert
From Missed Call Alert, select an alert type for
missed calls.
Use the following features to customize the
voice commands.
Enable Automatic Add
From Automatic Add, select Enabled to
automatically add a contact to your voice dial
list when you create a new contact.
If you select an & Remind alert, the phone
notifies you once when receiving a new
message and notifies you again every five
minutes. To stop a reminder alert, select Ignore
.
Set Expert Mode
Use Expert Mode to speak a command after
you hear a tone instead of following the initial
voice prompts.
Enable Any Key Answer
From Any Key Answer, select Enabled to
answer calls when you press any key on the
keypad.
From Expert Mode, select one of the
following:
Customize Keys
You can modify the Navigation key and Left
softkey settings to set up your desired shortcut.
•
Normal sets the phone to default voice
prompts.
1. From Customize Keys, select Up Nav Key
Left Nav Key Right Nav Key Down Nav
Key, or Left Soft Key
,
•
Expert sets the phone to sound tones instead
of voice prompts.
,
,
.
2. Select your desired menu option for the
targeted key shortcut.
User Guide
73
phone, the phone prompts “Incoming call from
(Name), answer?” Do one of the following:
Set Display Results
You can set the phone to display up to three
voice recognition contacts when calling or
searching for a contact with voice commands.
From Display Results, select Single Best or
•
•
•
Say “Yes” or press any except the End key
to answer the call.
Say “No” or press the End key to ignore the
call.
Remain silent. The voice alert repeats twice
and the phone rings once before returning to
the home screen.
Three Best
.
Set Digit Lengths
You can set the number of digits used for a
phone number in your voice dial list.
From Digit Lengths, select one of the following
options:
Use Voice Training
If your phone has trouble recognizing your
voice, you can train your phone to recognize
specifically your voice for numbers.
1. From Voice Training, read the message and
•
North American recognizes only 7, 10, and
1 + 10 digits in a phone number.
Permit All allows 4-14 digits in a phone
number.
•
select OK > Train Numbers > OK
.
2. Follow the prompts for each number until
training is complete.
Voice Answer
Note: You must read the numbers digit by digit
for voice training to work.
Enable Voice Answer
You can set your phone to answer a call with
your voice when using a hands-free accessory.
Accessories
1. From Auto-Answer, select Disabled
.
2. From Ringer Mode, select Normal
Set Headset Sounds
Sounds
3. From Headset Sounds, select Out of
headset
4. From Voice Answer, select With
Accessory
.
With a headset attached to your phone, you can
play the ringer through the headset or phone
speaker.
.
From Headset Sounds, select Out of phone
(ringing from the phone speaker) or Out of
headset (ringing from the headset).
.
Answer Using Voice Answer
When you receive an incoming call, the phone
prompts “Incoming call, answer?”. With the
caller recognized as a contact entry in your
Enable Auto-Answer
From Auto-Answer, select After 5 Seconds
The phone automatically answers after five
seconds with a headset attached.
.
74
Accessories
–
–
TTY On + Talk enables TTY devices
and voice carry over.
TTY On + Hear enables TTY devices
and hearing carry over.
Memory Card
Choose Files to Save
1. From Memory Card, select Items to Save
to choose what files you save to your
memory.
Note: You can also enter ##889 with your
keypad and select TTY to enable TTY.
2. Select file types from the list provided. A
checkmark appears next to each file type
that is saved to the memory card. Press the
OK key to add or remove checkmarks.
Connect to Hearing Aid Device
With a T-coil hearing aid device (sold
separately) connected, you can enable the
hearing aid feature.
3. When finished, select Done
.
1. Connect the T-coil hearing aid device to
your phone.
2. From T-coil Hearing Aid, select OK >
Format Memory Card
From Memory Card, select Format Card >
Yes to format your memory card.
Enabled
.
Note: Formatting will erase all current
information on the memory card.
Set USB Mode
You can set your phone to transfer files to and
from a computer.
Set Com Port Speed
From Com Port Speed, select a data rate at
which your phone connects to a laptop or PC.
Check with your service provider for details.
From USB Mode, select one of the following:
•
Mass Storage to use the microUSB jack
with a USB cable to transfer files.
Modem/COM to use the microUSB jack for
charging only.
•
Connect to TTY Device
You can connect the phone to a teletype (TTY)
device for the hearing impaired. (TTY device
sold separately.)
Note: Enable TTY only when using the phone
with a TTY device.
1. Connect the TTY device to your phone.
2. From TTY Device, select OK to clear the
notification.
Network
Enable Privacy Alert
From Privacy Alert, select Enabled to set your
phone to alert you when enhanced digital
CDMA privacy is lost or regained.
3. Select one of the following:.
Enable Voice Privacy
From Voice Privacy, select Enhanced to use
enhanced digital CDMA privacy.
–
–
TTY Off disables TTY.
TTY On enables TTY devices.
User Guide
75
established, a second phone number becomes
available in the menu for selection.
From Set Phone Line, read the note and select
OK and one of the phone lines.
Enable Roaming Service Alert
Use this setting if you want the phone to alert
you when you roam outside of your home
service area.
When using one line, you cannot receive calls
from the other. It would be as if the phone were
“off” for that number. Your voicemail, however,
still takes messages. All contacts and settings
are shared for both lines.
From Roam/Svc Alert, select one of the
following:
•
•
Disabled turns roaming service alert off.
When no svc alerts you with three tones
decreasing in pitch when service is lost and
three tones increasing in pitch when service
is acquired again.
Set Location Information
Use Location to share your location
•
•
On roam change alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
On any change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones if
the phone loses service.
information with network services other than
emergency services (for example, 911, 111, 999
and 000) in serviced areas. This feature works
only when your phone is in digital mode. You
do have the option of turning off the locator to
emergency services.
From Location, select one of the following:
•
911 Only (default) shares your position
information only with emergency services
when you call your 3-digit emergency code.
Location On shares your position
information, in addition to emergency
services.
Set Roaming Restrictions
You can restrict your phone from making a call
when roaming.
From Roam Option, select Automatic (to
allow roaming) or No Roaming (to disallow
roaming).
•
Set Web Alerts
You can set an alert to confirm the start or exit
of the browser.
Set Phone Line
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number.
Note: You must first establish a second phone
line with your service provider. Once
From Web Alert, select one of the following:
•
•
•
At Start prompts when you start a session.
At End prompts when you end a session.
Both prompts when you start and end a
session.
•
No Prompts sets for no prompts.
76
Network
Unlock the Phone
1. From the home screen, select Unlock
2. Enter your four-digit lock code.
Enable Roaming Call Alert
You can set the phone to warn you before you
answer or place a call while roaming.
Note: Call prompt is disabled when the phone is
in Emergency Mode.
.
Set Limit Calls
You can limit the calls that can be made from
your phone to emergency numbers, your
contacts, and your service provider’s numbers.
1. From Security, enter your four-digit lock
code.
From Roam Call Alert, select Enabled
The phone emits a distinctive ring to indicate
when you are roaming during a call. To accept
.
or place a call while roaming, you must press
1.
2. Select Limit Calls and one of the following:
Security
–
–
No Limit does not limit calls.
Limit Outgoing limits outgoing calls
while incoming calls still work.
Limit All limits both incoming and
outgoing calls.
This section describes the security features on
your phone. You can adjust these features to
prevent access to your personal information. All
security features are shielded by a four-digit
lock code (typically 0000 or the last 4 digits of
your phone number).
–
Erase All Contacts
1. From Security, enter your four-digit lock
code.
Lock Phone
Set Lock Phone
2. Select Erase Contacts > Yes > Yes to erase
all entries from your contacts list.
Note: You cannot recover deleted information.
With your phone locked, you can call only
emergency numbers or your service provider’s
customer service number. You can still receive
incoming calls.
1. From Security, enter your four-digit lock
code.
Change Lock Code
Change your lock code from the default.
1. From Security, enter your four-digit lock
code.
2. Select Lock Phone > OK and one of the
following:
2. Select New Lock Code > Yes
3. Enter a new four-digit code.
4. Re-enter your new lock code.
.
–
–
–
Never leaves the phone always
unlocked.
On power up locks the phone every
time you turn it on.
Now locks the phone immediately.
User Guide
77
13 Camera
Camera Tips
4. Select Send > Via EMS Msg (to attach to
an enhanced message), Via MMS Msg (to
attach to a multimedia message), Via
Bluetooth (to send to a Bluetooth-enabled
device), or To Printer (to print on a
Bluetooth-enabled device).
Select Erase to delete the picture from your
phone.
5. Press the End key to exit camera mode.
Note: If your phone has no Bluetooth feature,
you may only send the file with a message.
Your phone comes with a camera. Before using
your phone’s camera, here are some tips:
•
You cannot activate the camera while on an
active call or while browsing files in the
media gallery.
•
•
Once the camera is active, the home screen
acts as the viewfinder.
If you get a “Low memory” error, check
your resolution and quality compression
settings.
•
If there is no activity within 45 seconds after
you turn your camera on, the camera quits
and returns to the previous launch point.
Menu settings and options can only be
accessed when the camera is active.
Numbers in the top right corner indicate the
number of snapshots remaining before the
phone runs out of memory.
Camera Setting Options
Adjust the Resolution
From camera mode, select Options > Settings
> Resolution and a size for your pictures.
Numbers in the bottom left corner indicate the
current resolution setting.
•
•
Set Self Timer
Take a Picture
From camera mode, select Options > Settings
> Self Timer and a time.
1. To activate the camera, press and hold the
Camera key. You can also select Camera
from the main menu.
The
icon indicates the timer is activated.
When you take a picture, a beep plays three
seconds from the time the shutter snaps the
picture.
2. Focus on the image using the phone’s
display as a viewfinder.
3. To take a picture, press the OK key. The
picture is saved to Camera Pictures
.
User Guide
79
Enable Date/Time Stamp
Set Color Tone
From camera mode, select Options > Settings
> Date/Time > On to place a date/time stamp
each picture taken.
1. From camera mode, select Options >
Settings > Color Tone
.
2. Scroll left or right to select a color tone.
Look at the viewfinder to see how each
setting looks.
The
icon indicates when the date/time stamp
is on.
Enable Multishot Mode
Set Picture Quality
From camera mode, select Options > Settings
> Picture Quality and a quality level for your
picture.
From camera mode, select Options > Settings
> Multishot > On to take multiple pictures.
The
icon indicates multishot mode is
enabled. When you take a picture, press and
hold the OK key to take multiple pictures. A
single tone plays for each picture taken.
Your camera is set to a lower resolution during
multishot mode. The resolution setting returns
to the previous setting when you are done.
When you select a higher quality level, the size
of the file is bigger.
Set Save Location
If you have a memory card, you can save
pictures taken to it. From camera mode, select
Options > Settings > Save Location > Save To
Card
.
Set Shutter Sound
1. From camera mode, select Options >
If you remove your memory card, pictures will
be saved to your phone.
Settings > Shutter Sound
.
2. Select a sound to play when the shutter takes
a picture.
Set White Balance
1. From camera mode, select Options >
Settings > White Balance
.
2. Scroll left or right to select the white balance
setting. Look at the viewfinder to see how
each setting looks.
80
Camera Setting Options
Other Camera Options
Set Brightness Level
1. From camera mode, select Options >
Brightness
.
2. Scroll left or right to change the brightness
level. Press the OK key to set the brightness.
Go to Camera Pictures
From camera mode, select Options > Camera
Pictures to see all of the pictures you have
taken. These are located in Camera Pictures
.
Take a Picture in a Frame
1. From camera mode, select Options >
Frames
.
2. Scroll left or right to view the frames
available.
3. Select OK to choose a frame.
4. Take a picture with the frame. The frame is
part of the image and can not be removed.
User Guide
81
14 Voice Commands
You can do certain commands through voice
recognition. To control the settings associated
Call a Number
1. From the home screen, press and hold the
Send key. The phone prompts, “Say a
command”.
2. Say “Dial Number” and then speak the
digits of the number you want to call. If you
pause, the phone prompts you, “Did you say
<number>” or “Say a number” if it does not
recognize the name. Say “Yes” to make the
call, “No” to cancel the phone call.
3. Press the End key to end the call.
Call a Contact
1. From the home screen, press and hold the
Send key. The phone prompts, “Say a
command”.
2. Say “Contact” and then name of the person
you want to call.
The phone prompts, “Please repeat” or “Say
a name” if it does not recognize the name. If
the name you spoke matches a contact in the
voice dial list, the phone prompts: “Name,
correct?” Say “Yes” to make the call, “No”
to select a similar name, or “Cancel” to
cancel the phone call.
If the phone finds multiple voice tags that
sound like the name you said, the phone will
list the names, you will be asked to verify
which name you want to call. Say “Yes”
when you hear the correct name. Say “No”
when you hear an incorrect name.
Use a Shortcut
1. From the home screen, press and hold the
Send key. The phone prompts, “Say a
command”.
2. Say the name of the menu item you want to
access or say “Shortcuts” to view a list of
menu items. The phone prompts, “Say one
of the shortcuts”.
3. Say the name of the menu item you want to
access.
3. Press the End key to end the call.
To modify your voice dial list, see “Enable
Voice Dial Tags” on page 31.
82
Call a Contact
Play a Playlist
1. From the home screen, press and hold the
Send key. The phone prompts, “Say a
command”.
2. Say “Play” and then a playlist name. If you
pause, the phone prompts you to say a
playlist name.
3. Say “Yes” to confirm your choice.
Find a Contact
1. From the home screen, press and hold the
Send key. The phone prompts, “Say a
command”.
2. Say “Find Contacts”. The phone prompts,
“Say a name”.
The phone prompts, “Please repeat” or “Say a
name” if it does not recognize the name. If the
name you spoke matches a contact in the voice
dial list, the phone prompts: “Name, correct?”
Say “Yes” to display the contact, “No” to select
a similar name, or “Cancel” to cancel the
search.
Note: You can only search for contacts that are
in the voice dial list.
User Guide
83
15 Get Help
User Guide
contact the Customer Care Center, be ready to
provide the following information:
From Phone Info, select User Guide to access
•
•
The name of your service provider.
The actual error message or problem you are
experiencing.
the user guide. You can also find the user guide
.
•
•
The steps you took to reproduce the
problem.
The phone’s mobile equipment identifier
(MEID).
Customer Support
Your service provider’s customer support
department may be accessible directly from
your phone when you dial a number, such as
*611 (check with your service provider). They
can answer questions about your phone, phone
bill, call coverage area, and specific features
available to you, such as call forwarding or
voicemail. For questions about the phone
features, refer to the materials provided with
your phone, or visit
Note: From Phone Info, select Build Info
.
Scroll down to MEID. The 18-digit number is
the MEID number. If your phone uses an
electronic service number (ESN), ESN replaces
MEID
.
Qualified Service
If the problem with your phone persists, return
the phone with all accessories and packaging to
the dealer for qualified service.
.
For additional questions, you may contact the
Kyocera Communications Inc. Customer Care
Center in any of the following ways:
Phone Accessories
•
•
•
To shop for phone accessories, visit
also call us at 800-349-4188 (U.S.A. only)
or 858-882-1410.
Email: [email protected].
Phone: 1-800-349-4478 (U.S. and Canada)
or 1-858-882-1401.
•
Customer support phone numbers are also
available in the following countries:
–
–
India: 1-600-121214 or 0124-284-5000
Puerto Rico: 1-866-664-6443
Become a Product Evaluator
To participate in the testing and evaluation
of Kyocera Communications Inc. products,
including cellular or PCS phones, visit
Before requesting support, please try to
reproduce and isolate the problem. When you
beta.kyocera-wireless.com
.
84
User Guide
Index
Numerics
1-touch dialing, 72
installing, 9
recharging, 9
safety guidelines, 10
A
Bluetooth, 66
accessories, 84
activating, 66
headsets, 74
adding devices, 66
changing phone name, 67
connecting, 66
T-coil hearing aid, 75
TTY device, 75
airplane mode, 71
set date and time, 71
alarm clock, 58
alerts
connecting devices, 66
deleting devices, 66
OBEX authentication, 67
browser, 76
renaming devices, 66
visibility, 67
LED, 14
bookmarks, 61
lights only, 68
messages, 49
minute, 73
BREW, 24
Brick Attack, 54
browser
missed calls, 73
pages, 49
scheduler, 57
vibrate, 68
bookmarks, 61
launching, 61
navigating, 61
voice privacy, 75
voicemail, 49
applications, 24
downloading, 24
auto-hyphenation, 71
C
calculator, 59
call lists
all, 32
B
erasing, 33
backlighting, 70
banner, 70
battery
incoming, 32
missed, 32
outgoing calls, 32
saving numbers, 33
sending messages, 33
charging, 9
drain, 10
User Guide
85
viewing contacts, 33
call timers
shutter sound, 80
taking pictures, 79
white balance, 80
CDMA privacy, 75
com port speed, 75
contact groups, 29
contacts, 25
all, 33
data, 34
home, 34
incoming, 34
outgoing, 34
recent, 33
adding, 26
adding prefixes, 28
assigning alerts, 27
assigning pictures, 27
calling, 26
changing primary number, 28
checking memory, 31
editing, 27
groups, 29
roaming, 34
caller IDs, 36
calls
alerts, 67
answering, 18
any key answer, 73
call lists, 32
emergency, 20
ending, 19
number types, 27
sending vCard, 27
viewing, 25
limiting, 77
making, 18
missed, 73
voice search, 83
placing on hold, 72
redialing, 18
silencing, 19
timing, 73
web addresses, 28
contacts list, 25
conventions, using this guide, 17
countdown timer, 59
customer support, 84
voice answer, 74
voice commands, 82
camera, 79
D
data counter, 34
display, 69
brightness, 81
color tone, 80
date stamp, 80
multishot, 80
picture quality, 80
resolution, 79
save location, 80
self timer, 79
brightness, 70
language, 70
time and date, 71
downloads, 24
help, 24
drafts folder, 42
86
E
incoming calls, 32
Internet, 61
earpiece, 18
emergency calls, 20
emergency services, 76
K
keyguard
F
activating, 71
unlocking, 71
keypad
fast find, 72
frequent list, 73
setting sounds, 69
tone length, 69
G
games
Brick Attack, 54
L
groups
language, 70
LED behavior, 14
location information, 76
lock code, 77
adding contacts, 28
assigning pictures, 30
M
mass storage, 75
media files
adding to shuffle, 38
assigning, 37
copying, 38
details, 38
H
erasing, 39
headset sounds, 74
headsets
auto answer, 74
voice answer, 74
help, getting, 84
hold calls
locking, 37
modifying, 38
moving, 38
online locations, 37
playing, 38
renaming, 37
sending, 37
zoom, 38
activating, 72
changing message, 72
media gallery, 35
media player, 62
auto turn off, 64
Bluetooth, 64
do not disturb, 63
looping tracks, 63
I
icons, 15
images
erasing, 39
sending, 35
inbox, 46
User Guide
87
shuffle, 63
completing drafts, 42
creating, 41
memopad, 60
calling numbers, 60
creating memos, 60
editing memos, 60
erasing memos, 60
locking memos, 60
sending memos, 60
viewing memos, 60
forwarding, 46
incoming calls, 41
list view, 50
locking, 47
online locations, 42
playing attachments, 47
previewing, 44
read receipts, 45
recent calls, 42
replaying, 48
saving addresses, 42
saving attachments, 47
saving drafts, 42
saving preset text, 43
sending later, 45
setting priority, 44
signature, 50
memory card, 11
saving files, 75
menus
contacts, 25
custom, 73
main, 16
media gallery, 35
messaging, 40
recent calls, 32
setting main view, 70
settings, 65
tools, 54
messages
adding addresses, 42
adding contacts, 41
adding groups, 42
adding media files, 44
adding slides, 43
alerts, 49
attaching contacts, 43
attaching notes, 43
calling numbers, 47
slide intervals, 45
sorting, 47
unable to send, 49
validity period, 45
viewing information, 48
viewing recipients, 47
viewing sender, 47
viewing slides, 47
web addresses, 47
multimedia, 35
multimedia messages, 41
88
pictures
auto retrieve, 46, 50
CC/BCC fields, 50
prompt, 46
erasing, 39
frames, 81
sending, 35
slideshow, 38
viewing, 81
music
searching, 62
voice commands, 83
N
playlists
notifications
messages, 46
voicemail, 48
number prefixes, 28
number types, 27
access, 37
accessing, 63
creating, 63
power on sounds, 69
primary number, 28
product evaluation, 84
O
OBEX authentication, 67
Q
outbox, 49
quick alarm, 58
outgoing calls, 32
R
P
ringer shuffle
activating, 67
viewing, 68
ringers
assigning, 36
roaming
pages
alerts, 49
phone
accessories, 84
answering calls, 18
build information, 78
changing lock code, 77
codes, 26
extensions, 26
locking, 77
restrictions, 76
S
scheduler, 55
alerts, 57
making calls, 18
overview, 12
service, 84
auto erase, 57
copying events, 56
creating events, 55
day view, 56
editing events, 56
erasing events, 57
switching numbers, 76
turning on, 18
User Guide
89
event priority, 57
event reminders, 57
finding dates, 56
finding events, 56
month view, 55
sending events, 56
silent mode, 57
sorting events, 56
work hours, 57
security, 77
sending, 36
silence all, 68
speed dial list
adding contact, 28
editing, 31
using, 19
stopwatch, 59
support, customer, 84
T
T-coil hearing aid, 75
teletype device, 75
numbers, 21
themes, 70
timer, 59
Select, 25
settings
accessories, 74
camera, 79
convenience, 71
display, 69
security, 77
tip calculator, 58
tools, 54
alarm clock, 58
calculator, 59
memopad, 60
scheduler, 55
stopwatch, 59
timer, 59
tip calculator, 58
voice memos, 54
world clock, 60
sounds, 67
voice commands, 73
silent mode, 68
slide sounds, 68
slideshow, 38
songs
details, 63
finding, 62
loading, 62
U
repeating, 62
USB mode, 75
working with, 63
sounds
V
erasing, 39
vibrate mode, 68
display results, 74
power, 69
recording, 44
90
expert mode, 73
finding contacts, 83
making calls, 82
playing music, 83
shortcuts, 82
voice training, 74
voice dial list
automatic add, 73
digit lengths, 74
editing, 31
voice dialing, 19
voice memos, 54
recording, 55
voicemail
alerts, 49
changing number, 51
checking, 48
configuring, 48
volume
adjusting, 19
earpiece, 68
keypad, 68
ringers, 68
speakerphone, 68
W
wallpaper shuffle
activating, 69
time interval, 69
viewing, 69
web browser, 61
world clock, 60
User Guide
91
92
|