Kompernass KH 2295 User Manual

t
RDS Radio Alarm KH 2295  
Operating instructions  
w
e
q
r
t y u i o a s  
2@  
d
1( l k j h g f  
2! 2!  
2#  
2$  
2%  
Index  
1. Intended use .................................................................................................................................. 7  
2. Technical data................................................................................................................................ 7  
3. Safety Instructions......................................................................................................................... 7  
4. Items supplied................................................................................................................................ 8  
5. Operating elements and displays .................................................................................................. 9  
6. Preparing the RDS Radio Alarm for operation ......................................................................... 10  
7. Setting the date and time ............................................................................................................ 10  
7.1 Automatic setting of the date and time.............................................................................................. 10  
7.2 Manual setting of the date and time................................................................................................... 11  
8. Using the RDS Radio Alarm........................................................................................................ 12  
8.1 Using the radio of the RDS Radio Alarm ......................................................................................... 12  
8.1.1 Using the automatic radio station scanner .............................................................................. 12  
8.1.2 Manually setting and saving radio stations ............................................................................. 12  
8.1.3 Selecting saved radio stations..................................................................................................... 13  
8.1.4 Using the review function for saved radio stations................................................................. 14  
8.1.5 Adjusting the volume ................................................................................................................. 14  
8.1.6 Improving the reception of VHF/FM radio stations............................................................... 14  
8.2 Using the alarm function .................................................................................................................... 14  
8.2.1 Programming alarm times ......................................................................................................... 14  
8.2.2 Switching the alarm standby on/off .......................................................................................... 16  
8.2.3 Ending the alarm process .......................................................................................................... 16  
8.2.4 Using the snooze function (alarm interruption) .................................................................... 16  
8.2.5 Switching off the alarm function for the weekend ................................................................. 16  
8.3 Using the timer functions of the RDS Radio Alarm ........................................................................ 17  
8.3.1 Programming the sleep timer .................................................................................................... 17  
8.3.2 Programming the appointment timer (“Special Day Alert”) ................................................ 17  
8.3.3 Programming the Nap Timer ................................................................................................... 18  
9. Adjusting the display brightness ................................................................................................ 18  
10. Returning the RDS Radio Alarm to factory settings ............................................................... 19  
11. Switching on the button lock .................................................................................................... 19  
   
5ꢀ |ꢀ  
12. Connecting headphones to the RDS Radio Alarm .................................................................. 19  
13. Cleaning the RDS Radio Alarm ............................................................................................... 19  
14. Troubleshooting ........................................................................................................................ 19  
14.1 e RDS Radio Alarm shows no functions .................................................................................... 19  
14.2 No or poor reception of VHF/FM radio stations .......................................................................... 20  
14.3 No sound.............................................................................................................................................. 20  
14.4 Other malfunctions ........................................................................................................................... 20  
15. Disposal ..................................................................................................................................... 20  
16. Warranty & Service.................................................................................................................... 21  
17. Importer..................................................................................................................................... 21  
   
ꢀ |ꢀ 6  
Ú it could be irreparably damaged!  
us:  
RDS Radio Alarm  
E-Bench KH 2295  
DO NOT use or store the RDS Radio Alarm …  
Ú in moist environments!  
1. Intended use  
in close proximity to water! Additionally,  
NEVER subject the RDS Radio Alarm to  
spray or rain water.  
Ú
e RDS Radio Alarm is intended exclusively …  
Never place water-filled receptacles on the  
RDS Radio Alarm!  
Ú
Ú for the reception of VHF/FM radio stations  
Ú as an alarm  
Ú for stationary operation in covered areas  
Ú for private, non-commercial applications.  
Exposure to strong heat sources can lead to an  
overheating of the RDS Radio Alarm and to the  
melting of plastic parts. is could irreparably  
damage the RDS Radio Alarm, and there is the  
additional risk of a fire! us:  
Do not place the RDS Radio Alarm in close  
adjacency to sources of heat.  
Ú
2. Technical data  
Do not place any open fire sources – e.g.  
burning candles – on the RDS Radio Alarm!  
Ú
Power supply:  
230 V ~ / 50 Hz, 5 W  
Reception range UKW/FM:  
87,5 108,5 MHz  
Do not cover the ventilation openings of the  
Ú
RDS-Radio Alarm! Consequently, do not  
place the RDS Radio Alarm on blankets or  
other textiles. Ensure that the ventilation  
openings are a minimum distance of 10 cm  
away from walls or large objects.  
3. Safety Instructions  
Read the operating instructions carefully before  
using the appliance for the first time and pre-  
serve this booklet for later reference. Pass this  
booklet on to whoever might acquire the appli-  
ance at a future date.  
Do not use or store the RDS Radio Alarm in  
Ú
dusty environments. Otherwise dust could  
penetrate into the RDS Radio Alarm. If  
large quantities of dust enter into the RDS  
Radio Alarm it could overheat and be irrep-  
arably damaged. ere is also the risk of a  
fire!  
Danger!  
Should moisture/water permeate into the RDS  
Radio Alarm, …  
In the case of a defect, never attempt to repair  
the power cable yourself! ere is the risk of  
receiving an electric shock! Instead, consult our  
service partner responsible for your country.  
Contact information for our service partners is  
there is the risk of receiving an electric  
Ú
shock!  
   
7ꢀ |ꢀ  
given in the warranty card. e warranty card  
is supplied with the appliance.  
Ú improper use of the RDS Radio Alarm  
no liabilty or warranty will be accepted!  
Danger!  
e RDS Radio Alarm becomes warm when  
switched-on. is is not a cause for concern  
and is not an indication of a technical problem.  
Equipment connected to a power supply can be  
damaged during a thunderstorm. us:  
During a thunderstorm, always remove the  
plug from the power socket.  
Ú
4. Items supplied  
e power socket should be close to the ap-  
Ú
Ú RDS Radio Alarm KH 2295  
Ú Operating instructions  
Ú Warranty card  
pliance and easily accessible, so that the plug  
can be quickly removed in the event of dan-  
ger.  
Caution!  
e power socket to which the RDS Radio Alarm  
is connected must at all times be easily accessi-  
ble. e plug can then be quickly removed in the  
event of technical problems.  
e RDS Radio Alarm can be irreparably dam-  
aged if it falls or is dropped! Always place the  
RDS Radio Alarm on a firm, level and non-slip  
surface.  
Bear in mind when selecting a position for the  
RDS Radio Alarm: Modern furniture is treated  
with a multitude of paints, polishes and other  
surface finishings. It is possible that through  
these the feet of the RDS Radio Alarm could be  
compromised. en, residues could remain on  
the furniture surface, which may possibly not be  
removable. In cases of doubt, protect the furni-  
ture surface by placing the RDS Radio Alarm on  
a thin covering.  
ôNote:  
For damage resulting from …  
opening the housing of the RDS Radio  
Alarm  
Ú
Ú repairs attempted by unqualified persons  
   
ꢀ |ꢀ 8  
5. Operating elements and displays  
b) to select a programme-position group  
Button “Memory”  
a) to save the currently tuned radio station to  
a programme-position  
Headphone connection socket “Earphone”  
for the connection of headphones with a  
3,5 mm jackplug  
Operational state display  
Button “SNOOZE”  
q
1$  
1%  
w
e
b) to activate and save the time setting  
for short term interruption of the alarm  
signal  
Button “4/9”  
a)for the selection of programme-positions  
b) for the selection of programme-positions for  
appointment reminders  
Volume controller “Volume”  
r
t
Button “NAP Timer”  
to activate adjustment of the siesta timer  
Button “3/8”  
1^  
1&  
1*  
1(  
2)  
2!  
Button “Sleep”  
to activate programming of the sleep timer  
y
u
Functions as per button “4/9”  
h
h
h
h
Button “2/7”  
Functions as per button “4/9”  
Button  
Navigation button leſt for diverse  
adjustments of the tunings of the RDS Radio  
Alarm  
Button “1/6”  
Functions as per button “4/9”  
Button “0/5”  
Functions as per button “4/9”  
Button  
i
o
a
s
Navigation button right for diverse  
adjustments of the tunings of the RDS Radio  
Alarm  
Button AL2”  
to activate the programming of alarm time 2  
Button AL1”  
a) to activate the programming of alarm time 1  
b) to activate the review function for saved  
radio stations  
Button  
Navigation button downwards for diverse ad-  
justments of the tunings of the RDS Radio  
Alarm  
Button  
Sensor for automatic brightness regulation  
Power cable  
2@  
2#  
2$  
Navigation button upwards for diverse  
adjustments of the tunings of the RDS Radio  
Alarm  
VHF/FM wire aerial  
for the reception of VHF/FM radio stations  
Button “Reset”  
for returning to the factory settings  
Button “POWER On/O:  
a) to switch the RDS Radio Alarm on from  
the Standby mode  
2%  
b) to switch the RDS Radio Alarm off and  
into the Standby mode  
c) to switch off the alarm process  
Display  
1@  
1#  
Button “Group WEC”  
a) to switch the alarm readiness on/off for  
weekends  
   
9ꢀ |ꢀ  
ôNotice:  
6. Preparing the RDS Radio  
Alarm for operation  
RDS means “Radio Data System”. It is a system  
for transmitting additional information with  
radio programmes. Additional information is  
for example the name of the station, which is  
shown in the display of the RDS receiver. Addi-  
tionally, the RDS Radio Alarm uses RDS for the  
reception of time signals for the automatic ad-  
justment of time and date settings.  
Carefully take the RDS Radio Alarm out of  
the packaging.  
1
Attention!  
|
Do not allow the RDS Radio Alarm to fall! It  
could become irreparably damaged.  
Aſter insertion of the plug in the power socket  
the radio of the RDS Radio Alarm is switched  
on. e automatic station scanner starts for sev-  
eral seconds, recognisable in the running of the  
Place the RDS Radio Alarm only on a level,  
scratch resistant and non-slip surface.  
2
3
frequencies in the display . Subsequently it  
d
e feet on the rear of the RDS Radio Alarm  
can be adjusted to three levels. You can thus  
set the slant of the RDS Radio Alarm to  
your wishes. However, ensure that both feet  
are adjusted to the same angle. Otherwise  
the RDS Radio Alarm will be unstable and  
could fall down.  
breaks off the station scan; shown in the display  
are the date “01-01-07” and the time “0:00.  
d
Aſter a few seconds the time display changes  
over “1:00” and “1:59” to “2:00. e station  
scanner starts again; the clock in the radio alarm  
is now trying to receive date and time informa-  
tion over RDS. e clock symbol in the display  
blinks until a stable RDS reception is available.  
is can take several minutes. When time and  
date information is received, the radio switches  
itself off for the moment. In the display the cur-  
rent date and the current time is then displayed.  
Unwind the power cable to its full length.  
2#  
Insert the plug into a power socket. e dis-  
play will light up. e automatic sta-  
d
tion scanner starts, visible in the running of  
the frequencies in the display . is takes  
d
about 30 seconds.  
ôNotice:  
Aſter this, the RDS Radio Alarm is ready for op-  
eration.  
In general, the date is only shown in the display  
when the radio is switched off.  
Aſter a few seconds the automatic station scan-  
ner starts again. e radio scans the frequency  
range for receivable VHF/FM radio stations and  
saves them automatically to fixed programme  
positions. ereby, the clock symbol blinks in  
7. Setting the date and time  
7.1 Automatic setting of the date and  
time  
the display again.  
d
e clock of the RDS Radio Alarm is fitted with  
automatic time and date adjustment by means  
of RDS. It equalises running errors and also the  
change over from summer to winter time (and  
back again).  
As soon as the frequency ranges are fully  
scanned, the radio remains switched on; the  
last-saved radio station is playing.  
Should no time or date information be received  
by means of RDS, there begins …  
   
ꢀ |ꢀ 10  
the time display from the pre-programmed  
Set the minute indicator by pressing the  
4
5
Ú
Ú
time “2:00”  
buttons  
resp.  
.
a
o
the date display fronm the pre-programmed  
date “01-01-07.  
Press the button “Memory” again once.  
g
In the display the day indicator for the  
d
date blinks. Set the day indicator by pressing  
In these cases you can …  
the buttons  
resp.  
. e weekday  
a
o
indication before the date indication is au-  
tomatically adapted for the set date display.  
search for an RDS radio station manually.  
Ú
is is explained in chapter 8.1.2 “Manually  
e abbreviations in the display stand for  
d
setting and saving radio stations.  
the following weekdays:  
select an RDS radio station from those auto-  
MON  
TUE  
WED  
THU  
FRI  
Monday  
Tuesday  
Wednesday  
ursday  
Friday  
Saturday  
Sunday  
Ú
æ
æ
æ
æ
æ
æ
æ
matically saved to the fixed programme po-  
sitions. is is explained in chapter 8.1.3  
“Selecting saved radio stations.  
alternatively, you can set the time and date  
SAT  
Ú
manually. is is explained in chapter 7.2  
SUN  
“Manual setting of the date and time.  
Press the button  
setting of the month indicator. e month  
indicator now blinks.  
to change to the  
6
i
7.2 Manual setting of the date and time  
ôNotice:  
Manual time and date settings are corrected  
automatically as soon as an RDS radio station  
is received in radio operation.  
Set the month indicator by pressing the  
7
8
buttons  
resp.  
.
a
o
Press the button  
again to change to  
i
the setting of the year indicator. e year  
indicator now blinks.  
ôNotice:  
In carrying out the steps 2 to 9, you have ca. ten  
seconds for each one. If one step is delayed, you  
must start again from step 1.  
Set the year indicator by pressing the but-  
9
tons  
resp.  
.
a
o
Press the button “Memory” again once.  
10  
g
Switch the RDS Radio Alarm off by pressing  
In the display 24HR” blinks. 24HR in-  
1
2
3
d
the button “POWER On/O”  
dicates the 24 hour display format, as used  
in the majority of the European and Asian  
countries.  
s.  
Press the button “Memory” once. In the  
g
display the hour indicator blinks.  
d
To change to the 12 hour AM/PM display for-  
Set the hour indicator by pressing the but-  
mat, typical in the USA: Press the button  
tons  
the button  
resp.  
. Subsequently press  
resp.  
once. In the display “12HR”  
o
a
o
a
d
to change to the setting of  
blinks, the time is now shown in the 12 hour  
display format.  
i
the minutes indicator. e minute indicator  
is now blinking.  
   
11ꢀ |ꢀ  
With the buttons  
resp.  
you can  
Alternatively, you can also keep the buttons  
resp. pressed for a short period; this  
o
a
switch between both display formats.  
o
a
starts the manual station scanner. If a station is  
found with sufficient reception strength, the  
station scanner stops.  
When the desired indicator format is blink-  
11  
ing in the display : Wait for ca. 10 sec-  
d
onds, without pressing a button. e dis-  
play returns to its normal status; the time  
If a radio station you are searchuing for is being  
received, you can save it to one of the 50 fixed  
programme positions. Additionally:  
d
is now shown in the selected display format.  
e date is only shown when the radio is  
switched off.  
ôNote:  
8. Using the RDS Radio Alarm  
To carry out the steps 2 to 4 you have ca. 5 se-  
conds for each step. If one step is delayed, you  
must start again from step 2.  
8.1 Using the radio of the RDS Radio  
Alarm  
Press the button “Memory” once. In the  
2
3
4
g
display a two-figure programme position  
d
e RDS Radio Alarm is fitted with an auto-  
matic station scanner with an automatic save  
function. e station scanner starts automa-  
tically, as soon as the RDS Radio Alarm is con-  
nected to mains power. If you would like to use  
the station scanner again at a later time:  
number as well as “GROUP” is shown, the  
clock symbol and “MEM” are blinking. To  
designate a programme position number for  
the tuned radio station:  
First of all select the number for the first  
digit of the programme position number.  
For this, repeatedly press the button “Group  
8.1.1 Using the automatic radio station  
scanner  
WEC” . As soon as the desired figure for  
f
the first digit of the programme position is  
With the radio switched on, hold the button  
shown in the display  
:
d
“Memory” pressed down for ca. three sec-  
g
onds. e automatic station scanner now starts;  
Stations with sufficient reception strength are  
now automatically saved to fixed programme  
positions.  
Select the figure for the second digit of the  
two-figure programme position number.  
Repeatedly press the buttons “0/5” to “4/9.  
e buttons have the following functions:  
8.1.2 Manually setting and saving radio  
stations  
Button “0/5” – for selection of 0 resp.  
;
Ú
Ú
Ú
5 as the second digit of the programme  
position  
If you wish to save other radio stations additio-  
nally to the ones automatically saved to fixed  
programme positions:  
Button “1/6” – for selection of 1 resp.  
l
6 as the second digit of the programme  
position  
Search for a radio station with the buttons  
1
resp.  
. With each press of the  
Button “2/7” – for selection of 2 resp.  
o
a
k
key you will shiſt the frequency in steps of  
50 kHz.  
7 as the second digit of the programme  
position  
   
ꢀ |ꢀ 12  
Button “3/8” – for selection of 3 resp.  
First of all select the first digit of the pro-  
gramme position number of the desired  
radio station. For this, repeatedly press the  
j
1
2
Ú
Ú
8 as the second digit of the programme  
position  
button “Group WEC” . As soon as the  
f
Button “4/9” – for selection of 4 resp.  
desired figure for the first digit of the pro-  
gramme position is shown in in the dis-  
h
9 as the second digit of the programme  
position  
play  
:
d
When the desired programme position  
Select the figure for the second digit of the  
two-figure programme position number.  
Repeatedly press the buttons “0/5” to “4/9.  
e buttons have the following functions:  
number for the tuned radio station is shown  
in the display  
:
d
Press the button “Memory” again once.  
5
g
In the display the programme position  
Button “0/5” – for selection of 0 resp.  
d
;
Ú
Ú
Ú
Ú
Ú
number is shown in addition to the station  
frequency details, “MEM” no longer blinks.  
With RDS radio stations the station name  
and additionally the RDS logo is shown in-  
stead of the frequency and the programme  
position. To show the frequency and pro-  
gramme position of RDS radio stations  
during their reception: Press once on the  
5 as the second digit of the programme  
position  
Button “1/6” – for selection of 1 resp.  
l
6 as the second digit of the programme  
position  
Button “2/7” – for selection of 2 resp.  
k
button “Memory” . e frequency and  
7 as the second digit of the programme  
g
programme position of the tuned station is  
position  
then shown in the display for ca. 5 sec-  
d
onds.  
Button “3/8” – for selection of 3 resp.  
j
8 as the second digit of the programme  
e radio station is now saved to the shown  
programme position.  
position  
Button “4/9” – for selection of 4 resp.  
h
8.1.3 Selecting saved radio stations  
9 as the second digit of the programme  
position  
Select a radio station from the stations automa-  
tically saved to the fixed programme positions.  
ere are 50 fixed programme positions, begin-  
ning with programme position 10 and ending  
with programme position 59.  
e radio station saved to the selected pro-  
gramme position is now played back. In the  
display is shown the programme position  
d
number of the radio station in addition to  
the frequency details. With the relocation of  
an RDS radio station, aſter a few seconds the  
station name is shown instead of frequency  
and programme position number. To show  
the frequency and programme position of  
RDS radio stations during their reception:  
If you wish to receive the time signal, to auto-  
matically adjust the time and date: Select an  
RDS radio station, which is recognisable from  
the RDS logo shown in the display  
.
d
To select the programme position of a radio  
station:  
Press once on the button “Memory” . e  
g
frequency and programme position of the  
tuned station is then shown in the display  
for ca. five seconds.  
d
   
13ꢀ |ꢀ  
Example:  
To reduce the sound volume level: Turn the  
2
To select the radio station saved at programme  
controller “Volume” to the leſt, in the di-  
r
position 26:  
rection of the symbol  
.
Repeatedly press the button “Group WEC”  
f
When turning the volume controller, the current  
1
2
. As soon as a radio station in the pro-  
volume level is faded in shortly in the display  
.
d
gramme position group 20 (20 bis 29) is  
shown in the display  
e maximum volume level is shown at “V30,  
the minimum level (muting) with “V00.  
:
d
Repeatedly press the button “1/6” until  
8.1.6 Improving the reception of VHF/FM  
radio stations  
l
programme position 26 is shown in the dis-  
play  
.
d
e RDS Radio Alarm has a wire aerial for  
2$  
8.1.4 Using the review function for saved  
radio stations  
the VHF/FM frequency ranges. To improve the  
reception of VHF/FM stations:  
With the review function you can acquire an  
overview of all saved radio stations. To do this:  
Move the wire aerial slowly in various direc-  
tions, horizontally and vertically. When you  
have found a position that gives good reception  
of the tuned radio station: Fix the wire aerial in  
this position, e.g. with a piece of sellotape.  
With the radio switched on, hold down the  
1
button AL1” . All of the saved radio sta-  
2!  
tions of the current programme position  
group are now shown one aſter the other for  
about five seconds. e programme position  
numbers of the currently reviewed radio sta-  
8.2 Using the alarm function  
8.2.1 Programming alarm times  
tions are each shown in the display . If you  
d
wish to review the stations from other pro-  
gramme position groups:  
e RDS radio alarm has two separately pro-  
grammable alarm times available: AL1 and AL2.  
To programme an alarm time:  
Press the button “Group WEC” once to  
2
3
f
change to another programme group.  
Should the RDS Radio Alarm be switched  
on: First of all switch it off by pressing the  
1
To end the review function: Switch the ra-  
dio off by pressing the button “POWER On/  
button “POWER On/O . Keep the but-  
s
ton AL1” pressed for ca. two seconds.  
2!  
O”  
.
s
Shown in the display is:  
d
8.1.5 Adjusting the volume  
Ú ALARM”  
You can adjust the sound volume of the radio  
Ú the symbol for alarm time 1  
Ú the currently programmed alarm time AL1  
with the controller “Volume”  
.
r
To raise the sound volume level: Turn the  
1
controller “Volume” to the right, in the  
the abbreviation of the next weekday to  
r
Ú
direction of the symbol  
.
which the alarm time is activated. e ab-  
breviations in the display stand for the  
d
following weekdays:  
   
ꢀ |ꢀ 14  
MON  
TUE  
WED  
THU  
FRI  
Monday  
Tuesday  
Wednesday  
ursday  
Friday  
Saturday  
Sunday  
just selected setting blinks in the display  
.
d
æ
æ
æ
æ
æ
æ
æ
With the setting “ON, the alarm is switched  
on to the programmed alarm time on the  
selected weekday. With the setting “OFF,  
the alarm is not switched on on the selected  
weekday.  
SAT  
SUN  
Finally you must programme the type of alarm  
call required. ree types of alarm call are avail-  
able:  
ôNote:  
To carry out the steps 2 to 7 you have ca. ten  
seconds for each step. If one step is delayed,  
you must start again from step 2.  
Alarm call; radio: At the programmed alarm  
Ú
time on the selected weekday the radio  
switches itself on as the alarm signal.  
ereby, the last radio station it was tuned  
to is switched on. e radio remains  
switched on for 60 minutes.  
Press the button AL1” again. On the  
2
2!  
lower edge of the display the abbrevia-  
d
tions for all seven weekdays are shown.  
Press the button  
once. e hour  
Alarm call; alarm-tone: At the programmed  
3
4
i
Ú
indicator of the alarm time starts to blink.  
alarm time on the selected weekday the  
alarm-tone switches itself on as the alarm sig-  
nal. e sound volume of the alarm tone rises  
gradually. e alarm tone remains switched  
on for ten minutes.  
Programme the hour indicator for the  
desired alarm time. To do this, press the  
buttons  
resp.  
.
a
o
Press the button  
again to change to  
Alarm call; alarm tone and radio: At the  
5
i
Ú
programming the minute indicator. e  
minute indicator for the alarm time starts  
to blink.  
programmed alarm time on the selected  
weekday the alarm-tone switches itself on  
for ten minutes. e sound volume of the  
alarm tone rises gradually. Subsequently,  
the radio switches itself on for ten minutes.  
ereby, the last radio station it was tuned  
to is switched on.  
Programme the minute indicator for the  
desired alarm time. To do this, press the  
6
7
buttons  
resp.  
.
a
o
Press the button  
again to change to  
e currently selected alarm call type is shown  
i
programming the weekday. Blinking in the  
in the display through the following symbols:  
d
display are “ON” and “MON. Here you  
d
can individually activate or deactivate the  
programmed alarm time for all weekdays:  
resp.  
for alarm call; RDS radio  
Ú alarm  
Ú
By pressing the buttons  
you can switch through the weekdays. e  
weekday just selected blinks in the display  
resp.  
resp.  
for alarm call; alarm-tone  
resp. for alarm call;  
u
i
Ú
Ú
.
d
Ú alarm tone and radio  
By pressing the buttons  
you can switch between the setting “ON”  
and “OFF” for the just selected weekday. e  
resp.  
o
a
To programme the alarm call type:  
   
15ꢀ |ꢀ  
Press the button AL1” once. In the  
the abbreviation for the next weekday on  
which the alarm function will be switched  
on.  
8
9
2!  
Ú
display the RDS radio alarm symbol  
d
for the alarm call type Radio blinks. Press  
the buttons  
resp.  
to switch  
o
a
between the three alarm call types.  
To switch the alarm standby back on: Once  
again press the buttons AL1” resp. AL2”  
.
2)  
2!  
When you have selected the desired alarm  
call type: Press the button AL1” once.  
8.2.3 Ending the alarm process  
2!  
e programming for alarm time 1 is now  
saved.  
To end the alarm process when the alarm signal  
sounds: Press the button “POWER On/O”  
.
s
e RDS Radio Alarm is now in alarm standby;  
shown in the display aſter a few seconds are:  
8.2.4 Using the snooze function (alarm inter-  
ruption)  
d
Ú ALARM”  
You can interrupt the alarm signal by pressing  
the symbol for the programmed alarm call  
once on the button “SNOOZE” . e ope-  
e
Ú
type  
rational state display now blinks. Aſter ca. 9  
w
minutes the alarm call sounds again. If you wish  
to interrupt the alarm signal once more, press  
Ú the programmed alarm time  
the button “SNOOZE” again. e alarm sig-  
e
the abbreviation for the next weekday on  
nal can be interrupted any number of times.  
Ú
which the alarm function will be switched  
on.  
ôNote:  
If you would like to programme a second alarm  
time (AL2): Follow the steps 1 to 9 in this chap-  
ter. However, at the steps 1, 2, 8 and 9 press the  
e alarm call interruption functions with all  
three alarm call types. With the alarm call type  
“Radio and alarm tone”, pressing the button  
button AL2” instead of the button AL1”  
.
“SNOOZE” interrupts the alarm tone. Aſter  
2)  
2!  
e
ca. 9 seconds it sounds again. If the alarm tone  
is not interrupted, it sound for ca. 10 minutes.  
Subsequently the radio switches itself on as the  
8.2.2 Switching the alarm standby on/off  
To switch the alarm standby off: With the radio  
switched off, press and hold the button …  
alarm signal. If the button “SNOOZE” is now  
e
pressed, the radio is switched off. However, aſter  
ca. 9 minutes the alarm tone sounds again.  
to switch off alarm time 1  
Ú AL1”  
Ú AL2”  
2!  
2)  
8.2.5 Switching off the alarm function for the  
weekend  
to switch off alarm time 2.  
In the display the indicators extinguish for …  
To switch off the alarm function for weekends:  
With the radio switched off, press the but-  
Ú ALARM”  
1
ton “Group WEC” once. . In the display  
f
the symbol for the programmed alarm call  
“WEC” is shown. e alarm functions are  
d
Ú
type  
now switched off for weekends.  
Ú the programmed alarm time  
   
ꢀ |ꢀ 16  
To switch the alarm functions for week-  
8.3.2 Programming the appointment timer  
(“Special Day Alert”)  
2
ends back on again: Press the button “Group  
WEC” once more. In the display the  
f
d
indicator “WEC” extinguishes.  
With the appointment timer you can remind  
yourself of important dates/times. e RDS Ra-  
dio Alarm offers five memory slots (“SDA1” to  
“SDA0”) for appointments. To programme the  
appointment timer:  
8.3 Using the timer functions of the  
RDS Radio Alarm  
8.3.1 Programming the sleep timer  
ôNote:  
With the sleep timer switched on, the radio  
automatically switches itself off aſter a pro-  
grammed period of time. is facility can be  
used if you like to listen to music to help you  
fall asleep.  
To carry out the steps 1 to 8 you have ca. ten sec-  
onds for each step. If one step is delayed, you  
must start again from step 1.  
With the radio switched off, press the button  
1
To programme the sleep timer:  
“Memory” four times. In the display  
g
d
there now blinks in rotation the date indica-  
tor “31-12-06” and “SDA1.  
Press the button “Sleep” once. If you  
1
y
press the button “Sleep” with the radio  
y
switched off, it switches itself on. Blinking  
Press the button  
d
once. In the display  
2
3
i
in the display are the bed indicator, “60”  
the date indicator “31” now blinks.  
d
and the clock symbol.  
By pressing the buttons  
resp.  
,
a
o
Programme in the desired period until  
switch off of the radio. Timespans between  
0 and 120 minutes are available. To do this,  
programme the desired day. e weekday  
details are thereby automatically modified to  
the programmed day.  
2
press the buttons  
resp.  
. With  
a
o
each press of the buttons you increase or de-  
crease the indicated timespan by ten min-  
utes. If you select “00” as the timespan, the  
radio switches itself off aſter a few seconds  
without pressing a button.  
Press the button  
once more. In the  
4
5
i
display the month indicator “12” now  
d
blinks.  
By pressing the buttons  
resp.  
o
a
programme the desired month. e week-  
day details are thereby automatically modi-  
fied to the programmed month.  
Press the button “Sleep” once more to  
3
4
y
confirm the programming. e radio now  
switches itself off automatically on expiry  
of the programmed timespan. e time re-  
maining before automatic switch off is  
Press the button  
once more. In the  
6
i
display the year indicator “06” now  
d
shown in the display  
.
blinks.  
d
To switch off the sleep timer: Hold the but-  
By pressing the buttons  
resp.  
7
8
o
a
ton “Sleep” pressed down until the radio  
programme the desired year.  
y
switches off. e bed symbol and the time-  
span indicator extinguish.  
Press the button “Memory” once to con-  
firm the programming.  
g
   
17ꢀ |ꢀ  
On the selected date the alarm tone of the RDS  
Radio Alarm reminds you of the programmed  
appointment. e reminder sounds hourly  
between 08:00 and 23:00. ereby, the alarm  
tone remains switched on for 10 minutes.  
To interrupt the alarm tone: Press any button.  
e alarm tone sounds again on the next full  
hour (and each following full hour on this day).  
Programme the desired time interval until  
activation of the reminder alarm. Time in-  
tervals between 0 and 120 minutes are avail-  
2
3
able. To do this, press the buttons  
resp. . With each press of the buttons  
o
a
you increase or decrease the indicated time-  
span by ten minutes.  
Press the button “NAP Timer” once more  
t
To programme additional appointment remind-  
ers:  
to confirm the programming.  
e reminder alarm call sounds when the  
selected timespan has elapsed. e time remain-  
ing to the reminder alarm call and “NAP” are  
Follow the steps 1 to 8 in this chapter. However,  
before carrying out step 2 press once on …  
shown in the display . Until switch on of the  
d
the button “2/7” , to select the second  
reminder alarm call the operational state display  
k
Ú
Ú
Ú
Ú
memory slot (“SDA2”) for appointments.  
blinks.  
w
the button “3/8” , to select the third  
To switch off the Nap Timer: Hold the  
j
4
memory slot (“SDA3”) for appointments.  
button “NAP Timer” pressed down;  
t
“NAP” and the indicator for the timespan in  
the button “4/9” , to select the fourth  
the display extinguish.  
h
d
memory slot (“SDA4”) for appointments.  
the button “0/5” , to select the fiſth mem-  
9. Adjusting the display  
brightness  
;
ory slot (“SDA0”) for appointments.  
e individually selected memory slot then  
blinks in rotation with the date indicator “31-12-  
e brightness of the display can be adjusted  
in two levels. This functions with both a  
switched on and a switched off radio. For this:  
d
06” in the display  
.
d
Subsequently, contine with further steps as  
described.  
Hold the button “SNOOZE” pressed for  
ca. three seconds, until the display bright-  
ness has diminished.  
1
e
8.3.3 Programming the Nap Timer  
With the so called “Nap Timer” you can  
arrange an alarm call aſter a short pause or  
a reminder for an appointment. You can pro-  
gramme time periods between 0 and 120  
minutes until switch on of the reminder alarm.  
To programme the Nap Timer:  
To raise the display brightness again: Once  
2
again hold the button “SNOOZE” pressed  
e
down for ca. three seconds.  
Press the “NAP Timer” button  
once. In  
1
t
the display “NAP” and “60” are blinking.  
d
   
ꢀ |ꢀ 18  
the headphones into the headphone connection  
10. Returning the RDS Radio  
Alarm to factory settings  
socket “Earphone” . e loudspeakers of the  
q
RDS Radio Alarm are automatically switched off  
with the connection of headphones. e head-  
phone sound volume is to be adjusted with the  
To return the RDS Radio Alarm to factory set-  
tings and to erase all programing that has been  
carried out:  
volume controller “Volume”  
.
r
Danger!  
Turn the RDS Radio Alarm so that the  
underside of it is visible to you.  
Too frequent listening to music at high  
volume levels using headphones can  
cause hearing damage.  
1
2
With a pen/pencil (or other sharp pointed  
object) press the button “Reset” . e dis-  
2%  
play extinguishes for several seconds, aſter-  
wards the automatic station scanning starts.  
e RDS Radio Alarm is now returned to  
the factory settings.  
13. Cleaning the RDS Radio  
Alarm  
Clean the housing and display of the RDS Radio  
Alarm with a lightly moistened cloth only. e  
display could be scratched if you use a dry cloth.  
In the case of stubborn stains, pour a few drops  
of mild detergent on the damp cloth.  
11. Switching on the button lock  
To avoid an unintentional operation of the but-  
tons of the RDS Radio Alarm, you can acti-  
vate the button lock. is functions with both a  
switched on and a switched off radio. To do this:  
Attention:  
|
Take steps to ensure that no moisture per-  
meates into the RDS Radio Alarm when clean-  
ing it! ere is the danger of receiving an elec-  
tric shock!  
Hold the button  
pressed down until  
1
u
“LOCK” appears in the display . e  
d
button lock is now activated. e button  
lock blocks the operation of all buttons;  
excluded are only the buttons  
(to  
14. Troubleshooting  
u
deactivate the button lock) and “SNOOZE”  
.
e
14.1 The RDS Radio Alarm shows no  
functions  
To deactivate the button lock: Hold the  
button pressed down until  
“UNLOCK” is shown in the display  
2
u
.
d
Check to see that the power cable is  
A
B
2#  
correctly inserted into the power socket.  
12. Connecting headphones  
to the RDS Radio Alarm  
Check to see that the power socket into  
which the power cable is inserted is “live.  
Connect a known working appliance to the  
power socket.  
If you would like to connect headphones to the  
RDS Radio Alarm: Insert the 3,5 mm jackplug of  
   
19ꢀ |ꢀ  
Check to see if the button lock of the RDS  
Radio Alarm is activated. See chapter 11.  
“Switching on the button lock.  
the measures described in chapter 14. “Trou-  
bleshooting” do not eliminate the problem  
or  
C
Ú
Ú
Disconnect the RDS Radio Alarm from the  
power supply. Wait a few seconds, then re-  
connect it. Check to see if the malfunction is  
still extant.  
other malfunctions occur during operation  
of the RDS Radio Alarm.  
D
Contact information for our service partners is  
given in the warranty card. e warranty card is  
supplied with the appliance.  
ôNote:  
Be aware that programming already carried out  
on the RDS Radio Alarm will be erased.  
Danger!  
In the case of a defect, never attempt to repair  
the power cable yourself! ere is the danger of  
receiving an electric shock! Instead consult our  
service partner responsible for your country.  
14.2 No or poor reception of VHF/FM  
radio stations  
Carry out the steps described in chapter  
8.1.6 “Improving the reception of VHF/FM  
radio stations.  
A
Warning!  
|
e RDS Radio Alarm does not contain any  
user-serviceable parts. If the housing of the RDS  
Radio Alarm is opened, the warranty expires!  
For repairs which may be needed, consult our  
service partner responsible for your country.  
Search for a radio station with better recep-  
tion. is is explained in the chapters …  
B
8.1.1 “Using the automatic radio station  
scanner”  
Ú
Ú
ôNote:  
For damage resulting from …  
8.1.2 “Manually setting and saving radio  
stations”  
opening the housing of the RDS Radio  
Alarm  
Ú 8.1.3 “Selecting saved radio stations”  
Ú
14.3 No sound  
Ú repairs attempted by unqualified persons  
Ú improper use of the RDS Radio Alarm  
Increase the sound volume level by turning  
A
B
the volume controller “Volume” to the  
r
right.  
no liabilty or warranty will be accepted!  
Check to see if headphones are connected  
to the RDS Radio Alarm. Connecting head-  
phones to the RDS Radio Alarm automati-  
cally switches off the built-in loudspeakers.  
15. Disposal  
14.4 Other malfunctions  
Do not dispose of the appliance in  
your normal domestic waste.  
Consult our service partner responsible for your  
country if …  
   
ꢀ |ꢀ 20  
Dispose of the appliance through an approved  
disposal centre or at your community waste fa-  
cility.  
Observe the currently applicable regulations. In  
case of doubt, please contact your local waste  
disposal centre.  
16. Warranty & Service  
Please read the conditions for warranty and take  
note of the service centre addresses given on the  
warranty card.  
17. Importer  
Kompernaß GmbH  
Burgstraße 21  
D-44867 Bochum  
   
21ꢀ |ꢀ  
Kompernaß GmbH · Burgstraße 21 · D-44867 Bochum  
ID no.: KH2295-012/06-V3  

LG Electronics C660R User Manual
HP Hewlett Packard SURE STORE DAT 5000I User Manual
Fujitsu MAC3045 User Manual
FieldServer FS 8700 01 User Manual
Emerson MS3110 User Manual
Curtis CR1320 User Manual
Compaq CD Player NX7000 User Manual
ClearSounds SW200 User Manual
Belkin USB VIDEOBUS P73261 User Manual
ABB SSC600 User Manual