Kenwood KVT 526DVD User Manual

MONITOR WITH DVD RECEIVER

KVT-526DVD

KVT-556DVD

INSTRUCTION MANUAL

Declaration of Conformity with regard to the EMC

Directive 2004/108/EC

Manufacturer:

Kenwood Corporation

2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan

EU Representative's:

Kenwood Electronics Europe BV

Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

Hands Free Unit Control

Control Screen Function

When Received a Call

Calling by Entering a Phone Number

Quick Dialing

Controlling Tone-based Services

Calling by Phonebook

Making a Call Using Call Records

Calling by Voice Recognition

Setting Up the Hands-Free Phone

Voice Registration

Muting Audio Volume upon Reception

of Phone call

Muting Audio Volume upon Reception of

Phone Call

Character Entry

How To Use the Character Entry Screen

Key Word Voice Registration

Phone Number Preset

SMS (Short Message Service)

Screen Control

Setup Menu

Audio Control

Audio Control Menu

Audio Control

Equalizer Control

Tone Setup

Setup Menu

Audio Setup

Crossover Network Setup

DVD Setup

Language Setup

Parental Level Setup

DivX Setup

Zone Control

System Setup

Panel Color Coordinate

AV Interface Setup

User Interface

Direct Source Button Setup

Entering Background

Background Delete

Background Select

Touch Panel Adjustment

Clock Setup

Remote Controller

Battery Installation

Remote Controller Mode Switch

Common Operations (AUD mode)

DVD/VCD/CD/Audio Files (DVD mode)

TV (TV mode)

Radio (AUD mode)

Monitor Setup

Security Code Setup

Deactivating Security Code

iPod Setup

TV Setup

RDS Setup

DVD Language Codes

Help? Troubleshooting

Help? Error

Bluetooth Setup

Registering Bluetooth Unit

Registering Bluetooth Unit PIN Code

Registering Special Bluetooth Unit

Bluetooth Unit Connection

Deleting Bluetooth Unit

Software Information

Setup Memory

Specifications

English

Before Use

Handling discs

2WARNING

• Do not touch the recording surface of the disc.

• Do not stick tape etc. on the disc, or use a disc with

tape stuck on it.

• Do not use disc type accessories.

• Clean from the center of the disc and move

outward.

To prevent injury or fire, take the following

precautions:

• To prevent a short circuit, never put or leave any

metallic objects (such as coins or metal tools) inside

the unit.

• Do not watch or fix your eyes on the unit’s display

when you are driving for any extended period.

• When removing discs from this unit, pull them out

horizontally.

• If the disc center hole or outside rim has burrs,

use the disc only after removing the burrs with a

ballpoint pen etc.

How to reset your unit

• If the unit or the connected unit fails to operate

properly, press the Reset button. The unit returns to

factory settings when the Reset button is pressed.

• Remove the USB device before pressing the Reset

button. Pressing the Reset button with the USB

device installed can damage the data contained in

the USB device. For how to remove the USB device,

see <Playing a USB device> (page 12).

Discs that cannot be used

• Discs that are not round cannot be used.

• Discs with coloring on the recording surface or

discs that are dirty cannot be used.

• This unit can only play the CDs with

This unit may not correctly play discs which do not

have the mark.

• You cannot play a CD-R or CD-RW that has not

been finalized. (For the finalization process refer to

your CD-R/CD-RW writing software, and your CD-

R/CD-RW recorder instruction manual.)

• If you try to load a 3-inch-disc with its adapter into

the unit, the adapter might separate from the disc

and damage the unit.

Reset button

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a

dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe the stain off

with a cloth moistened with neutral cleaner, then

wipe it again with a clean soft dry cloth.

Other notes

• If you experience problems during installation,

consult your Kenwood dealer.

• When you purchase optional accessories, check

with your Kenwood dealer to make sure that they

work with your model and in your area.

•

Applying spray cleaner directly to the unit may affect its

mechanical parts. Wiping the faceplate with a hard cloth

or using a volatile liquid such as thinner or alcohol may

scratch the surface or erases characters.

• The characters conforming to ISO 8859-1 character

set can be displayed.

• The RDS or RBDS feature won’t work where the

service is not supported by any broadcasting

station.

Lens Fogging

When you turn on the car heater in cold weather,

dew or condensation may form on the lens in the

disc player of the unit. Called lens fogging, this

condensation on the lens may not allow discs to play.

In such a situation, remove the disc and wait for the

condensation to evaporate. If the unit still does not

operate normally after a while, consult your Kenwood

dealer.

KVT-526DVD/KVT-556DVD

Notes

List of playable discs

Navigation units that can be connected to

Disc

types

DVD

Standard

Support

Remark

this unit

• KNA-G620T

‡

DVD Video

DVD Audio

DVD-R

Update the navigation software to the latest

version. For how to update the software, refer to the

instruction manual of the navigation unit.

‡

MP3/WMA/AAC/JPEG/

MPEG/DivX Playback

Multi-border/Multisession/

(Playback depends on

authoring conditions)

Compatible with 8-cm (3

inch) discs

For the latest information on connectable navigation

units, access www.kenwood.com/cs/ce/.

‡

DVD-RW

DVD+R

iPod/iPhone models that can be connected

to this unit

DVD+RW

‡

DVD-R DL (Dual layer)

DVD+R DL (Double layer)

DVD-RAM

Made for

Only video format

• iPod nano (1st generation)

• iPod nano (2nd generation)

• iPod nano (3rd generation)

• iPod nano (4th generation)

• iPod nano (5th generation)

• iPod with video

‡

Music CD

CD-TEXT/8-cm (3 inch)

discs supported.

MP3/WMA/AAC/JPEG/

DivX playback

‡

CD-ROM

CD-R

CD-RW

Multisession supported

Packet write not supported.

• iPod classic

‡

DTS-CD

Video CD (VCD)

Super video CD

Photo CD

• iPod touch (1st generation)

• iPod touch (2nd generation)

Works with

CD-EXTRA

Only music CD session can

be played.

Sound quality of normal

CD music

HDCD

CCCD

Dualdisc

Super audio CD

Others

Only CD layer can be

played.

• Update iPod/iPhone software to the latest version.

‡ : Playback is possible.

• You can control an iPod/iPhone from this unit by

connecting an iPod/iPhone (commercial product)

with Dock connector using an optional accessory

iPod connection cable (KCA-iP301V). The word

"iPod" appearing in this manual indicates the iPod/

iPhone connected with the KCA-iP301V (optional

accessory).

• By connecting your iPod/iPhone to this unit with

an optional accessory iPod connection cable (KCA-

iP301V), you can supply power to your iPod/iPhone

as well as charge it while playing music. However,

the power of this unit must be on.

% : Playback is partly possible.

× : Playback is impossible.

⁄

•

When buying DRM enabled contents, check the

Registration Code in the <DivX Setup> (page 62).

Registration Code changes each time a file with the

displayed Registration Code is played to protect against

copying.

Use of "DualDisc"

When playing a "DualDisc" on this unit, the surface

of the disc that is not played may be scratched

while the disc is inserted or ejected. Since the music

CD surface does not conform to the CD standard,

playback may be impossible.

Bluetooth unit that can be connected to

this unit

• KCA-BT200

(A "DualDisc" is a disc with one surface containing

DVD standard signals and the other surface

containing music CD signals.)

TV tuner that can be connected to this unit

• KTC-D500E

• KTC-V300E

• KTC-V301E

English

Notes

About Audio files

About Picture files

•

Playable Audio file

•

Acceptable picture files

JPEG

Extensions

jpg, jpeg

Acceptable media

AAC-LC (.m4a), MP3 (.mp3), WMA (.wma)

⁄

•

If music of normal CD and other playback systems are

recorded in the same disc, only the playback system

recorded at the first setout is played.

Playable disc media

CD-R/RW/ROM, DVD R/RW

Playable disc file format

ISO 9660 Level 1/2, Joliet, Romeo, Long file name.

Playable USB device

USB mass storage class, iPod with KCA-iP301V

Playable USB device file system

FAT16, FAT32

CD-R/RW/ROM, DVD R/RW, mass-storage-class

USB device

Acceptable discs, disc formats, USB device file system,

file and folder names and playing order are the same

as those for audio files. See <About Audio files>.

•

About USB device

• In this manual, the word "USB device" is used for

flash memories and digital audio players which

have USB terminals.

• When the USB device is connected to this unit,

it can be charged up provided that this unit is

powered.

• Install the USB device in the place where it will not

prevent you from driving your vehicle properly.

• You cannot connect a USB device via a USB hub

and Multi Card Reader.

• Take backups of the audio files used with this unit.

The files can be erased depending on the operating

conditions of the USB device.

We shall have no compensation for any damage

arising out of erasure of the stored data.

• No USB device comes with this unit. You need to

purchase a commercially available USB device.

Although the audio files are complied with the standards

listed above, the play maybe impossible depending on

the types or conditions of media or device.

•

Playing order of the Audio file

In the example of folder/file tree shown below, the

files are played in the order from ① to ⑩.

FFoollddeerr

AAuuddiioofﬁile

(ꢂ)

vꢀ

ꢁ

ꢃ

vꢆ

vꢇ

ꢅ

vꢄ

ꢈ

vꢉ

• When connecting the USB device, usage of the CA-

U1EX (option) is recommended.

Normal playback is not guaranteed when a cable

other than the USB compatible cable is used.

Connecting a cable whose total length is longer

than 5 m can result in abnormal playback.

An online manual about audio files is put on the

site, www.kenwood.com/audiofile/. On this online

manual, detailed information and notes which are

not written in this manual are provided. Make sure

to read through the online manual as well.

About Video files

•

Acceptable video files

MPEG1, MPEG2, DivX

Extensions

mpg, mpeg, divx, div, avi

Acceptable media

CD-R/RW/ROM, DVD R/RW, VCD, mass-storage-

class USB device, iPod with KCA-iP301V

Acceptable discs, disc formats, USB device file system,

file and folder names and playing order are the same

as those for audio files. See <About Audio files>.

KVT-526DVD/KVT-556DVD

Region codes in the world

The DVD players are given a region code according to the country or area it is marketed, as shown in the

following map.

DVD disc marks

Operation regulatory marks

With this DVD, some functions of this unit such as the

play function may be restricted depending on the

location where the DVD is playing. In this case, the

following marks will appear on the screen. For more

information, refer to the disc manual.

Symbol

Description

Indicates a region number. The discs with this mark can

be played with any DVD player.

ALL

Indicates the number of audio languages recorded. Up

to 8 languages can be recorded in a movie. You can

select a favorite language.

Prohibition Mark

禁止マーク

Indicates the number of subtitled languages recorded.

Up to 32 languages can be recorded.

Discs with limited period of use

Do not leave discs with a limited period of use in this

unit. If you load an already expired disc, you may not

be able to remove it from this unit.

If a DVD disc has scenes shot from multiple angles, you

can select a favorite angle.

Indicates the type of screen for the image. The left mark

indicates that a wide image picture (16:9) is displayed

on a standard TV set screen (4:3) with a black band at

both the top and bottom of the screen (letter box).

16:9 LB

English

How to read this manual

This manual uses illustrations to explain its

operations.

Seek Mode

The displays and panels shown in this manual

are examples used to provide clear explanations

of the operations.

Sets a station selection.

For this reason, they may be different from the

actual displays or panels used, or some display

patterns may be different.

The mode is switched in following order each

time you touch the button.

Display

Setting

"AUTO1"

Tunes in a station with good reception

automatically.

"AUTO2"

"MANU"

Tunes in stations in memory one after another.

Switches to the next frequency manually.

∞

: Continues to the next line.

: Ends here.

Manual Memory

Stores the current receiving station in memory.

Select a station you wish to store in

memory

Store in memory

Continue to the next page

The instruction continues to the next page

Make sure to flip the page for the rest of the

instruction.

Next page 3

The above operation example with the mark

differs from the actual operation.

KVT-526DVD/KVT-556DVD

Short Press

Pre

ss the button, denoted by

Change in the screen

With each operation, the screen changes in

e order shown here.

Selecting a screen item

Select and choose an item on the screen.

Select the item by touching the button on the

screen

Other marks

Press 1 second or more

Press the button, denoted by

second or more (2-3 seconds).

Important precautions are described to

prevent injuries etc.

, for 1

Indicates to press and hold down the button

until operation starts or the screen changes.

The left example indicates to press the button

for 2 seconds.

Press it approximately for the seconds shown

the

clock

Special instructions, supplementary

explanations, limitations, and reference pages

are described.

General precautions and reference pages are

shown on the item.

The initial value of each setup is shown.

English

Basic Operations

When the monitor is open

Security indicator

(page 72)

B D

When the monitor is closed

Disc loading slot

Opens/Closes the monitor

Press to open or close the monitor panel

• Do not touch the moving components when you are opening or closing the monitor. If you touch the moving

components, you may be hurt or the equipment may be damaged.

• Do not try to open or close the monitor by hand.

⁄

• You can automatically open or close the monitor when you turn on or off the ignition key (<Monitor Setup> page 70).

• If the monitor movement is stopped by the shift lever or another obstacle when the monitor is opened, this movement

is canceled by the safety function. If an obstacle is pinched by the monitor when closed, the monitor movement is also

canceled by the safety function. If it has occurred, remove the obstacle and press the [OPEN/CLOSE] button again.

KVT-526DVD/KVT-556DVD

Adjusts the volume

Turns power ON/OFF

Press the button to turn on the power.

When the button is pressed and held down for

1 second or more, the power is turned off.

Attenuates the volume

Press it to attenuate the volume.

Press it again to cancel muting.

Listening Traffic Infomation

Press it for more than 1 second to turn the

Traffic Infomation function on or off. (page 31)

Playing a disc

When you load a disc into disc loading slot, the disc starts playing.

If a menu appears, when playing a video disc, select the desired item.

⁄

• See <List of playable discs> (page 5) for a list of supported discs and formats.

Removing a disc

Press [0] (Eject) button.

Play/ Pause

Selects a band/folder

Press [38] button once to pause.

Press again to resume playing.

Press [FM] button to change to the radio bands

to FM1/2/3 or next folder/disc.

Press [AM] button to change the radio band to

AM or previous folder/disc.

Stop/ play

Press [7] button to stop playing.

Press [38] button to resume playing from

the previous interrupted position.

‰

Selects a chapter/scene/track/

frequency

Press [4] or [¢] button.

Selects a music or chapter, track, or frequency.

Switches Seek Mode

Press the butotn to select the Seek mode.

(See page 29, 41 for the <Seek Mode>.)

English

Basic Operations

Playing a USB device

When connecting a USB device, playback starts automatically.

⁄

•

If the USB source is selected when a USB device is not connected, "No Device"

is displayed.

•

When the playback is stopped and then restarted, the playback will start from

the point where it was stopped at the last time. Even if the USB is removed

and connected again, the playback will start from the last stopped point

unless the contents in the USB device is changed.

•

Make sure that the USB device is connected firmly.

Removing the USB device

Press

on the USB control screen to enter the USB suspend mode, and then remove the USB

device. Refer to <USB Device Control> (page 36).

•

Removing the USB device before entering the USB suspend mode may result in damaging the data in the USB device.

KVT-526DVD/KVT-556DVD

Selecting a source

Press it to display the source select screen. Touch the source button to select the source.

Full Source Select screen

1 Scrolls the source display.

⁄

•

The displayed source depends on the type of device

connected. In addition, you cannot press the button of

currently unavailable source.

The following buttons are always displayed on the

source select screen and source control screen.

2 Press for at least 2 seconds to erase the buttons. Touch

the screen to redisplay the buttons.

3 Displays the Source Select screen.

The display switches between Favorite Source Select

screen and Full Source Select screen by touching the

button.

4 Displays Source Control screen.

5 Displays the Audio Control Menu screen. (page 80)

6 Displays the Setup Menu screen. (page 58)

7 Adjusts the volume.

Favorite Source Select screen

8 Clock display

9 Displays the Full Source Select screen.

⁄

•

For how to register the frequently used source buttons to

Favorite Source Select screen, see <Direct Source Button

Setup> (page 67).

English

Basic Operations

Screen Setup

Switches to the Navigation system

Press the button.

Displays the Screen Control Screen (page 46).

Press the button to switch the display to the

navigation system screen.

Switches to the Hands Free control

Turns the display OFF

Press it for more than 1 second to the Hands

Free control screen.

Press it for more than 1 second to turn the

display off.

Press it again for more than 1 second to

resume the normal display.

Press [NAV], [SRC] or [FNC] button, or touch the

screen to resume the normal display.

⁄

• Functions of the [NAV] button can be changed to rear

view function. See <System Setup> (page 62) for the

function setting of the [NAV] button.

KVT-526DVD/KVT-556DVD

Switching the function screen

The function control screen switches in the following order each time you press the button.

Navigation screen

Picture or Video playback

screen

[FNC] button

Easy Control buttons

appear.

Navigation screen

Picture or Video playback screen

Mode:Full AV–OUT:AV–IN

DVD VIDEO

SCRN

DVD VIDEO

Title

C ha p

0:00:05

Easy Control button

⁄

• For the functions of Easy Control buttons, see <Control of Other Sources While Displaying the Navigation Screen> (page

16).

English

Navigation Control

Sets and controls the navigation system function.

Control of Other Sources While Displaying

the Navigation Screen

Using the Navigation System

Displays the navigation system screen and makes

the navigation function available.

Selected source can be controlled while

displaying navigation screen.

Displaying the navigation screen

Display the easy control buttons

When "DVD" is selected:

Setting the navigation system function

Touch the navigation system button displayed

on the screen. See the included NAVIGATION

SYSTEM's INSTRUCTION MANUAL for

1 Displays the Screen Control screen.

See <Screen Control> (page 46).

2 Adjusts the volume.

3 During DVD play :

information on using the navigation system.

⁄

Selects a chapter.

During VCD play :

Selects a scene (when PBC is On) or a

track (when PBC is Off).

During CD play :

•

You can set the navigation system function when

nothing else is displayed on the screen. If anything else,

such as Easy control panel is displayed, erase it first.

An optional navigation system needs to be connected.

See <Navigation units that can be connected to this

unit> (page 5) for connectable navigation units.

•

Selects music.

During Audio file, Video file, or Picture file

play :

Selects a file.

4 Stops playing.

When pressed twice, the disc is played from

its beginning when you play it the next

time. (DVD play only)

5 Plays or pauses.

6 When touched this area, the source control

screen appears.

KVT-526DVD/KVT-556DVD

When "USB" or "iPod" is selected:

7 During iPod play :

Searches Music or Video.

During USB play :

Selects a file.

8 Plays or pauses.

9 When touched this area, the source control

screen appears.

When "TUNER" is selected:

p Tunes in a station.

q Switches the band (to AM or FM 1/2/3).

w When touched this area, the source control

screen appears.

When "TV" is selected:

e Selects a channel.

Use the <Seek Mode> (page 41) to change

the channel tuning sequence.

r Switches to TV1 or TV2.*¹

t Switches the Seek mode.*¹

y When touched this area, the source control

screen appears.

When "Bluetooth" is selected:

u Selects a file.

i Plays.

o Pauses.

; When touched this area, the source control

screen appears.

⁄

•

The Easy Control buttons are hidden when you touch the

central part of the screen.

•

*¹Not available for the optional digital TV tuner KTC-

D500E.

English

Watching DVD/VCD

You can play DVD/VCD using various functions.

•

For the basic method of how to watch DVD/VCD, see <Basic Operations> (page 10).

Set the remote controller mode switch to "DVD" mode before starting operation, see <Remote Controller Mode Switch>

(page 84).

5 Backward Chapter Search Area

Selects the previous chapter.

6 DVD Disc Menu Control Buttons Area

Displays the Disc Menu Control buttons

(page 20).

Functions During the Playback Screen

Basic functions are available even when the

playback screen is displayed.

Display the playback screen

7 Information Display Button Area

VCD playback screen

Mode:Full

DVD VCD

AV–OUT:AV–IN

DVD VCD

Scene

0:05

PBC

VER2

8 Scene/Track Number Display

9 Play time Display

p Forward Scene/Track Search Area

Selects the next scene (when PBC is On) or

track (when PBC is Off).

q Backward Scene/Track Search Area

Selects the previous scene (when PBC is On)

or track (when PBC is Off).

[DVD] button on the "Source Select" screen

w Zoom Control Button Area

Displays the Zoom Control buttons (page

22).

e Information Display Button Area

⁄

•

The information display is cleared automatically after

approximately 5 seconds. Also, the information can be

displayed automatically when it is updated.

DVD playback screen

DVD VIDEO

Mode:Full

AV–OUT:AV–IN

DVD VIDEO

Title

C ha p

0:00:05

1 Title Number Display

2 Chapter Number Display

3 Play Time Display

4 Forward Chapter Search Area

Selects the next chapter.

KVT-526DVD/KVT-556DVD

Functions While Displaying the Control

Screen

Functions When Displaying the Easy

Control Panel

Switches to the source control screen to use

various playback functions.

Displays the basic operation buttons on the

screen.

While the source is playing, press the [FNC]

button

While the source is playing, press the [FNC]

button

Mode:Full

AV–OUT:AV–IN

DVD VIDEO

Mode:Full

AV–OUT:AV–IN

DVD VIDEO

SCRN

DVD VIDEO

Title

C ha p

0:00:05

DVD VIDEO

Title

C ha p

0:00:05

1 Chapter Search (during DVD play)

Searches for a chapter.

Scene/Track Search (during VCD play)

Selects a scene (when PBC is On) or a track

(when PBC is Off).

When playing a DVD

2 Stops playing.

When pressed twice, the disc is played from

its beginning when you play it the next

time.

3 Plays or pauses.

⁄

•

When the navigation screen is displayed, press the [NAV]

button to switch to the source playback screen.

The Easy Control Panel is hidden when you touch a

central part of the monitor.

When playing a VCD

•

1 Switches to the playback screen.

2 Title Number Display (during DVD play)

3 Chapter/Scene/Track Number Display

4 Play Mode Display

5 Play Time Display

6 Volume Label Display

When

appears, the text display is

scrolled by pressing it.

7 Ejects the disc.

8 Fast Forwards or Fast Backwards.

Next page 3

English

Watching DVD/VCD

9 Stops playing.

DVD Disc Menu

When pressed twice, the disc is played from

its beginning when you play it in the next

time.

Selects an option from the DVD Disc Menu.

Display the Disc Menu Control screen

p Selects a chapter, a scene or a track.

When the VCD is paused, touch this button

to start single-frame stepping.

q Plays or pauses.

Mode:Full

AV–OUT:AV–IN

DVD VIDEO

w Slow Forwards or Backwards. (during DVD

play)

e Switches the Repeat Play operations in the

following sequence.

DVD VIDEO

Title

C ha p

0:00:05

DVD: Title Repeat, Chapter Repeat, Repeat

Off

VCD: Track Repeat, Repeat Off (Available

when the PBC is off)

Top

e n u Ct r l

Return

r Switches the play time display in the

following sequence.

DVD: Chapter, Title, remaining titles

VCD: Track, disc, remaining discs (Effective

only when the PBC function is off)

t Function Indicator

E n t e r

C a n c e l

E x i t

Highlight

y Appears when a disc is inserted.

u Turns the PBC function of VCD On or Off.

(only when VCD Ver 2.0 is in use)

i Appears when PBC is On.

o VCD version indicator

1 Calls the Menu.

2 Returns to the Disc Menu screen.

3 Selects a menu option.

4 Enters your menu selection.

5 Returns to the previous menu screen.

6 Displays the Top Menu.

7 Highlight Control.

8 Clears the Disc Menu Control.

KVT-526DVD/KVT-556DVD

Highlight Control

9 Calls the Menu Control.

You can select a chapter and title for the DVD

Menu screen. When you touch the screen, you

can select the DVD menu.

p Switches the picture angle.

(during program playback only)

q Switches the subtitle language.

(during program playback only)

w Switches the voice language.

(during program playback only)

e Displays the Zoom Control screen.

r Clears the Disc Menu Control.

Top

e n u Ct rl

Return

Zoom Control

E n t e r

C a n c e l

E x i t

Highlight

Audio

1 / 2

e n u C t r l

S U B

3 / 3

H i g h l i gh t On

Z o om

Angle

E x i t

1 / 1

Z o omC t r l

⁄

•

Touching the central part of the monitor also turns on

the Highlight Control.

•

To cancel Highlight Control, press [FNC] button.

E x i t

Z o om

x 2

C a n c e l

Select Disc Menu options

t Changes the zoom ratio at 4 levels (2 times,

3 times, 4 times, or off) each time you

touch.

Disc Menu

Top

e n u Ct rl

Return

y Scrolls the screen in the direction you

touch.

u Returns to the Disc Menu Control screen.

i Clears the Disc Menu Control.

E n t e r

C a n c e l

E x i t

Highlight

Audio

1 / 2

e n u Ct rl

S U B

3 / 3

E x i t

Z o om

Angle

1 / 1

English

Watching DVD/VCD

VCD Zoom Control

Displays an enlarged VCD screen.

Display the Zoom Control screen

Mode:Full

DVD VCD

AV–OUT:AV–IN

DVD VCD

Scene

0:05

PBC

VER2

Z o omCt rl

Z o om

x 2

E x i t

1 Changes the zoom ratio at 2 levels (2 times

or off) each time you touch.

2 Scrolls the screen in the direction you

touch.

3 Clears the Zoom Control button.

KVT-526DVD/KVT-556DVD

Music Disc & Audio File Listening

You can recall various control screens during CD/Audio file playback.

•

For the basic method of how to play a music disc/audio file, see <Basic Operations> (page 10).

See <List of playable discs> (page 5) for playable discs.

See <About Audio files> (page 6) for playable files.

Functions While Displaying the Control

Screen

5 Music information display

Selects the Disc Text or Track Text.

When

appears, the text display is

Switches to the source control screen to use

various playback functions.

scrolled by pressing it.

6 Ejects the disc.

7 Fast Forwards or Fast Backwards.

8 Stops playing the built-in disc player. When

pressed twice, the disc is played from its

beginning when you play it the next time.

9 Selects a track.

p Plays or pauses.

q Starts or stops Scan Play (that plays the

beginning of each music one after the

other).

w Repeats to play (the present track).

e Starts or stops Random Play (to play music

in random order).

r Switches the number of lines displayed in

the Information Display.

t Switches the play time display between

Track and Disc Remaining Time.

y Function Indicator

[DVD] button on the "Source Select" screen

u Appears when a disc is inserted.

During CD playback

1 Switches to the wallpaper.

2 Track (Music) Number Display

3 Play Mode Display

4 Play Time Display

Next page 3

English

Music Disc & Audio File Listening

During Audio file playback

b MUSIC, MOVIE or PICTURE indicator

n Appears when a disc is inserted.

m Repeats to play the music or data of the

present folder.

, Displays images in the folder currently

being played one after another.

If there is no image in the folder currently

being played, initial background is

displayed.

For information on setting the image

display time, see <System Setup> (page 62).

. You can search for folders and Audio files

through a hierarchy.

P Displays music information (such as Tag

and content property) of Audio file being

played.

42 41

i Switches to the playback screen. If there is

no playback screen, wallpaper is displayed.

o Folder and File Number Display

; Play Mode Display

a Play Time Display

s Music information display

Q Lists folders and Audio files.

Selects Folder Name, File Name, Title, Artist

Name, or Album Name.

Folder opens when touched, and the Audio

file is played.

When

appears, the text display is

When

appears, the text display is

scrolled by pressing it.

d Ejects the disc.

W Scrolls the list.

f Fast Forwards or Fast Backwards.

(Disabled when a JPEG is being played.)

g Stops playing.

E Moves to the top hierarchy level.

R Moves up a hierarchy level.

T Displays the currently playing file.

When pressed twice, the disc is played back

from its beginning in the next time.

h Selects a file.

j Plays or pauses.

k Selects a folder.

l Switches the button display.

/ Starts or stops Scan Play (that plays the

beginning of each music or data one after

the other).

z Repeats to play (the preset files or data).

x Starts or stops Random Play (to play files of

the present folder in random order).

c Switches the number of lines displayed in

the Information Display.

v Function Indicator

KVT-526DVD/KVT-556DVD

Video File/Picture File Watching

You can recall various control screens during playback of video file (MPEG 1, MPEG 2 and DivX file) and

picture file (JPEG file).

5 JPEG: Picture Control Button Area (page 27)

DivX: Sub=Off, Audio 1/1

Function During Playback Screen

Basic functions are available even when the

playback screen is displayed.

MPEG: Switches to the screen with subtitle

language selection option and voice

language selection option.

Display the playback screen

6 Information Display Button Area

⁄

•

The information display is cleared automatically after

approximately 5 seconds. Also, the information can be

displayed automatically when it is updated.

[DVD] button on the "Source Select" screen

Mode:Full

AV–OUT:AV–IN

DVD MEDIA

0:00:05

1 Folder/File Number Display

2 Play Time Display

3 Forward File Search Area

Selects the next file.

4 Backward File Search Area

Selects the previous file.

English

Video File/Picture File Watching

Functions When Displaying the Easy

Control Panel

Functions While Displaying the Control

Screen

Displays the basic operation buttons on the

screen.

Switches to the source control screen to use

various playback functions.

While the source is playing, press the [FNC]

button

While the source is playing, press the [FNC]

button

Mode:Full

AV–OUT:AV–IN

DVD MEDIA

Mode:Full

AV–OUT:AV–IN

DVD MEDIA

SCRN

DVD MEDIA

0:00:05

DVD MEDIA

0:00:05

PICTURE

1 Selects a file.

2 Stops playing.

3 Plays or pauses.

⁄

•

When the navigation screen is displayed, press the [NAV]

button to switch to the source playback screen.

The Easy Control Panel is hidden when you touch a

central part of the monitor.

•

1 Switches to the playback screen.

2 Folder and File Number Display

3 Play Mode Display

4 Play Time Display

KVT-526DVD/KVT-556DVD

5 Video/Picture information display

Selects Folder Name, File Name, Title, Artist

Name, or Album Name.

g Scrolls the list.

h Moves to the top hierarchy level.

j Moves up a hierarchy level.

k Displays the currently playing file.

When

appears, the text display is

scrolled by pressing it.

6 Ejects a disc.

7 Fast Forwards or Fast Backwards.

(Disabled when a JPEG is being played.)

8 Stops playing.

Picture Control

Adjusting the video display.

When pressed twice, the disc is played back

from its beginning in the next time.

9 Selects a file.

Start Picture Control

DVD MEDIA

Mode:Full

AV–OUT:AV–IN

p Plays or pauses.

q Selects a folder.

w Switches the button display.

e Starts or stops Scan Play (that plays the

beginning of each song or data one after

the other).

DVD MEDIA

0:00:05

r Repeats to play (the preset files or data).

t Starts or stops Random Play (to play files of

the present folder in random order).

y Switches the number of lines displayed in

the Information Display.

Adjust the video display

Picture Ctrl

u Function Indicator

i PICTURE, MOVIE or MUSIC indicator

o Appears when a disc is inserted.

; Repeats to play the file of the present folder.

a Displays images in the folder currently

being played one after another.

If there is no image in the folder currently

being played, initial background is

displayed.

Exit

1 Reverses the picture horizontally.

2 Rotates counter clockwise.

3 Rotates clockwise.

4 Ends Picture Control.

For information on setting the image

display time, see <System Setup> (page 62).

s You can search for folders and files through

a hierarchy.

d Displays information of file being played.

25 24

f Lists folders and Video files/Picture files.

Folder opens when touched, and the Video/

Picture file is played.

English

Radio Listening

Various control screens appear in the Tuner Source mode.

•

For the basic method of receiver button operations, see <Basic Operations> (page 10).

Set the remote controller mode switch to "AUD" mode before starting operation, see <Remote Controller Mode Switch>

(page 84).

Functions While Displaying the Control

Screen

4 Radio station information display.

Selects the Program Service Name, Title &

Artist name, Station Name, Radio Text Plus

1/2, or Radio Text.

5 Switches to the FM1/2/3 band.

6 Switches to the AM band.

Switches to the source control screen to use

various functions.

7 Tunes in a station.

Use the <Seek Mode> (page 29) to change

the frequency switching.

8 Switches the button display.

9 Selects the Monaural reception mode. (Only

when receiving the FM broadcast)

p Selects the Auto Memory mode.

(See page 30 for the <Auto Memory>)

q Switches the Seek mode.

[TUNER] button on the "Source Select" screen

(See page 29 for the <Seek Mode>)

w Switches the number of lines displayed in

the Information Display.

e Turns the Local Seek function On or Off.

r Turns the Traffic Information function On or

Off.

See <Traffic Information> (page 31).

t When

buttons appear, you

can recall the stations on memory.

For memory of broadcasting stations, see

<Auto Memory> (page 30) or <Manual

Memory> (page 30).

y Searches station by program type. See

<Search by Program Type> (page 32).

u Lists and selects memorized station.

i Displays Radio Text screen. See <Radio

Text> (page 31).

1 Band display

2 Preset number

3 Frequency display

KVT-526DVD/KVT-556DVD

Seek Mode

Sets a station selection.

o Memorized stations are displayed. Touch to

tune in.

; Scrolls the list.

The mode is switched in following order each

time you touch the button.

Display

Setting

"AUTO1"

Tunes in a station with good reception

automatically.

"AUTO2"

"MANU"

Tunes in stations in memory one after another.

Switches to the next frequency manually.

English

Radio Listening

Auto Memory

Manual Memory

Stores stations with good reception in memory

automatically.

Stores the current receiving station in memory.

Select a station you wish to store in

memory

Select a band you wish to store in memory

Select the Auto Memory mode

Store in memory

Continue to touch until the memory number

appears.

Start Auto Memory

Touch

Auto Memory terminates when 6 stations are

stored or when all stations are tuned in.

⁄

•

The operation ends automatically if you do not operate

within 10 seconds.

KVT-526DVD/KVT-556DVD

: Press for # seconds.

Radio Text

Traffic Information

You can display the radio text. (Only when

receiving the FM broadcast)

When a traffic bulletin starts, any source is

switched to the traffic information and it is

displayed automatically.

Select a station

Set the Traffic information mode

Display the radio text

When the traffic bulletin starts...

The Traffic Information screen appears

automatically.

Traffic Information screen

1 Selects the Program Service Name, Title &

Artist name, Station Name, Radio Text Plus,

or Radio Text for text display.

⁄

•

When

appears, the text display is

It is necessary to have Traffic Information function set to

On in order to have the Traffic Information screen appear

automatically.

During reception of traffic information the adjusted

volume is automatically remembered, so that the next

time it switches to traffic information the level is that

from the previously adjusted and remembered level.

scrolled by pressing it.

2 Scrolls the text display.

3 Returns to the previous screen.

•

English

Radio Listening

Search by Program Type

A program is tuned when you set its program

type. (Only when receiving the FM broadcast)

Enter Program Type mode

Select a Program Type

1 Program Type is displayed. Touch to select a

Program Type.

2 Scrolls the Program Type list.

3 Searches for the program type.

It is displayed when the Program type is

selected.

4 Returns to the previous screen.

Search a station of the selected Program

Type

KVT-526DVD/KVT-556DVD

iPod Control

You can control and listen to songs in your iPod by connecting an iPod to this unit with KCA-iP301V

(optional accessory). You can also display video contents on this unit when connecting an iPod with video.

Functions When Displaying the Easy

Control Panel

Connecting an iPod

Connect an iPod to this unit.

Displays the basic operation buttons on the

screen.

While the source is playing, press the [FNC]

button

Mode:Full

AV–OUT:AV–IN

iPod

Mode:Full

AV–OUT:AV–IN

iPod

SCRN

iPod

00002/00006

0:00:05

1 Forward music/video search area

iPod

00002/00006

0:00:05

Selects the next music/video.

1 Music/Video Search.

2 Plays or pauses.

2 Backward music/video search area

Selects the previous music/video.

3 Information display button area

⁄

The information is displayed for 5 seconds.

•

When the navigation screen is displayed, press the [NAV]

button to switch to the source playback screen.

The Easy Control Panel is hidden when you touch a

central part of the monitor.

⁄

•

Remove all accessories such as headphone before

connecting an iPod. You may not be able to control the

iPod if you connect it with accessories attached.

When you connect an iPod to this unit, playback starts

from the song you were playing on the iPod itself

(Resume Function).

If you start playback after connecting the iPod, the music

that has been played by the iPod is played first.

In this case, "RESUMING" is displayed without displaying

a folder name, etc. Changing the browse item will display

a correct title, etc.

•

When the iPod is connected to this unit, "KENWOOD" or

"✓" is displayed on the iPod to indicate that you cannot

operate the iPod.

If the played song is not a video content, "No iPod Video

Signal" is displayed on the video screen.

English

iPod Control

Functions While Displaying the Control

Screen

Switches to the source control screen to use

various playback functions.

When Video or picture is playing, press the

[FNC] button.

1 Image picture

Switches to the playback screen. If there is

no playback screen, wallpaper is displayed.

2 Total number of music in the iPod and the

music number display

Mode:Full

AV–OUT:AV–IN

iPod

3 Play Mode Display

4 Play Time Display

5 Music/Video Information Display

Selects the Title, Artist Name, Album Name

or iPod Name.

SCRN

When

scrolled by pressing it.

appears, the text display is

iPod

00002/00006

0:00:05

6 Fast Forwards or Fast Backwards.

7 Selects Music/Video.

8 Plays or pauses.

9 Switches the button display.

p Starts or stops Scan Play (that plays the

beginning of each music or video one after

the other).

q Repeats to play (the preset files or data).

w Starts or stops Random play.*

e MUSIC or VIDEO indicator

r Starts or stops Album Random Play (plays

randomly from current album).*

t Displays the list of music category.

y Displays the list of video category.

u Displays the previous music/video list

screen.

[iPod] button on the "Source Select" screen

i Displays information screen of music/video

being played.

⁄

* Disabled when VIDEO is being played.

KVT-526DVD/KVT-556DVD

o Categories and music are listed.

Touch a category name to move to its lower

level. If music title is displayed, the music is

played by touching it.

When

appears, the text display is

scrolled by pressing it.

When

appears, all the music in its

category is played by touching the button.

; Switches list page.

a Returns to previous category.

s Moves to the top category.

d Displays the currently playing category.

English

USB Device Control

You can control and listen to songs in your USB device by simply connecting it to the USB connector of this

unit.

•

For the connection of a USB device, see <Basic Operations> (page 10).

Functions When Displaying the Easy

Control Panel

Functions While displaying the Control

Screen

Displays the basic operation buttons on the

screen.

Switches to the source control screen to use

various playback functions.

When Video or picture is playing, press the

[FNC] button.

While the source is playing, press the [FNC]

button

Mode:Full

AV–OUT:AV–IN

USB

Mode:Full

AV–OUT:AV–IN

USB

SCRN

0002/0006

USB

0:00:05

USB

0002/0006

0:00:05

1 Selects a file.

2 Plays or pauses.

⁄

•

The Easy Control Panel is hidden when you touch a

central part of the monitor.

[USB] button on the "Source Select" screen

KVT-526DVD/KVT-556DVD

y Repeats to play the music or data of the

present folder.* (Only in Folder Select Mode)

u Displays images in the folder currently

being played one after another.*

If there is no image in the folder currently

being played, initial background is

displayed.

For information on setting the image

display time, see <System Setup> (page 62).

i Displays the folder list. See <Folder Select>

(page 38).

o Displays the list of category.

; Displays information screen of music being

played.

⁄

* Disabled during play list mode.

1 Image picture

Switches to the playback screen. If there is

no playback screen, wallpaper is displayed.

2 Track Number Display

3 Play Mode Display

4 Play Time Display

5 Music information display

Selects the Folder Name, File Name, TItle,

Artist Name, or Album Name.

The display above can also be the folder list

display. See <Folder Select> (page 38).

When

appears, the text display is

scrolled by pressing it.

a Switches to the lower level of the category.

If the file is displayed, the music is played by

touching it.

6 Removes the USB device.

When "No Device" is shown, the USB device

can be removed safely.

s Scrolls the list.

If you wish to play it again while the USB

device is connected, press it again.

7 Selects a folder. (Only in Folder Select

Mode)*

d Lists all the music in the selected category.

f Moves to the upper level of the category.

g Moves to the top category.

h Displays the currently playing category.

(Only in Category Mode)

8 Selects a file.

9 Plays or pauses.

p Switches the button display.

q Starts or stops Scan Play (that plays the

beginning of each music one after the

other).

w Repeats to play (the present music).

e Starts or stops Random Play (to play music

in random order).

r Switches the number of lines displayed in

the Information Display.

t MUSIC, VIDEO or PICTURE indicator

English

USB Device Control

Folder Select

Searches folders and Audio files stored in the USB

device according to hierarchy.

Start Folder Select

Select music

1 Lists folders and Audio files

Folder opens when touched, and the Audio

file is played.

2 Scrolls the list.

3 Moves to the top hierarchy level.

4 Moves up a hierarchy level.

5 Moves to the top page of the list.

6 Displays the currently playing file.

KVT-526DVD/KVT-556DVD

TV Watching

Various control screens appear in the TV source mode. You can only operate TV with the optional accessory

TV Tuner connected.

Functions When Displaying the Easy

Control Panel

Function During TV Screen

Basic functions are available even when the TV

screen is displayed.

Displays the basic operation buttons on the

screen.

Display the TV screen

While the source is playing, press the [FNC]

button

[TV] button on the "Source Select" screen

Mode:Full

AV–OUT:AV–IN

SCRN

BAND

SEEK

2ch

Mode:Full

AV–OUT:AV–IN

TV1

Preset 1

1 Selects a channel.

Use the <Seek Mode> (page 41) to change

the channel tuning sequence.

2 Switches to TV1 or TV2.*¹

3 Switches the Seek mode.*¹

TV1

Group 1

Preset 1

2ch

AUTO1

1 TV Band Number Display

2 TV Area Group Display. See <TV Setup>

(page 74).

3 Memory Number Display

4 Channel Number Display

5 Channel Up Area

⁄

•

When the navigation screen is displayed, press the [NAV]

button to switch to the source playback screen.

The Easy Control Panel is hidden when you touch a

central part of the monitor.

*¹Not available for the optional digital TV Tuner KTC-

D500E.

Increases the channel.

6 Channel Down Area

Decreases the channel.

7 Band Switch Area

Switches to TV1 or TV2.

8 Information Display Button Area

⁄

•

The information display is cleared automatically after

approximately 5 seconds. Also, the information can be

displayed automatically when it is updated.

English

TV Watching

Functions While Displaying the Control

Screen

7 Select a channel.

Use the <Seek Mode> (page 41) to change

the channel tuning sequence.

8 Switches to TV1 or TV2.

9 Switches the button display.

p Selects the Auto Memory mode.

See <Auto Memory> (page 41).

q Switches the Seek mode.

See <Seek Mode> (page 41).

w Indicates current Seek mode.

Switches to source control screen to use various

functions.

While the source is playing, press the [FNC]

button

e When

buttons, you can

recall channels on memory.

For memory of broadcasting stations, see

<Auto Memory> (page 41) or <Manual

Memory> (page 42).

Mode:Full

AV–OUT:AV–IN

r Sets a name to the tuned station. (page 42)

t Lists and selects memorized station.*¹

SCRN

BAND

SEEK

2ch

Preset 1

TV1

y Memorized stations are displayed. Touch to

tune in.*¹

⁄

*¹Not available for the optional digital TV Tuner KTC-D500E.

1 Switches to the TV screen.

2 Band display

3 TV Area Group Display

See <TV Setup> (page 74).

4 Memory Number Display

5 Channel display

6 Channel information display

KVT-526DVD/KVT-556DVD

TV Menu (only with KTC-D500E (optional

accessory) connected)

Auto Memory

(only with KTC-D500E or KTC-V301E

(optional accessory) connected)

Menu Control screen appears by touching the

area shown below.

Stores stations with good reception in memory

automatically.

Mode:Full

AV–OUT:AV–IN

Select a band you wish to store in memory

TV1

Group 1

Preset 1

2ch

AUTO1

EPG

e n u Ct rl

Return

Select the Auto Memory mode

E n t e r

E x i t

1 Shows EPG (Electric Program Guide) screen.

2 Shows Digital TV Broadcansting menu

screen.

3 Returns to the previous screen.

4 Executes selected menu item.

5 Returns to Digital TV screen.

6 Moves highlight in Digital TV Broadcansting

menu.

Start Auto Memory

Seek Mode

Sets a station selection.

Auto Memory terminates when 6 stations are

stored or when all stations are tuned in.

⁄

•

The operation ends automatically if you do not operate

within 10 seconds.

The mode is switched in following order each

time you touch the button.

Display

Setting

"AUTO1"

Tunes in a station with good reception

automatically.

"AUTO2"

"MANU"

Tunes in stations in memory one after another.

Switches to the next frequency manually.

English

TV Watching

: Press for # seconds.

Manual Memory

(only with KTC-D500E or KTC-V301E

(optional accessory) connected)

Set Station Name

Assigns a name to a station.

Select a station you wish to name

Start Name set

Stores the current receiving channel in memory.

Select a station you wish to store in

memory

Enter the name

Store in memory

See <Character Entry> (page 45) for

information on how to enter a name.

End Name set

Continue to touch until the memory number

appears.

KVT-526DVD/KVT-556DVD

Bluetooth Audio Control

When KCA-BT200 (optional accessory) is connected, you can listen to audio files stored in Bluetooth audio

player and cell-phone.

•

You need to register your audio player and cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction

manual of the Bluetooth Unit as well.

Functions While Displaying the Control

Screen

Switches to control screen to use various

functions.

[Bluetooth] button on the "Source Select"

screen

1 Plays.

2 Pauses.

3 Stops playing.

4 Selects a file.

⁄

•

If the Bluetooth Audio player does not support AVRCP

profile, buttons 1 to 4 are not displayed. Operate from

the Audio player.

English

Muting Audio Volume upon Reception of Phone call

When the telephone is called, the system is paused automatically.

Muting Audio Volume upon Reception of

Phone Call

When a telephone call is received...

The Phone Call ("CALL") screen appears, and

system is paused.

Phone Call ("CALL") screen

When the call ends...

Hang up the phone.

The system resumes playing automatically.

⁄

•

To use the TEL Mute feature, you need to hook up

the MUTE wire to your telephone using a commercial

telephone accessory. Refer to <INSTALLATION MANUAL>.

KVT-526DVD/KVT-556DVD

Character Entry

When you select the Set Station Name mode or others, the following screen appears for character entry.

How To Use the Character Entry Screen

Character Entry screen

1 Shifts the cursor.

2 Enters characters.

3 Scrolls up or down the character button

display.

4 Sets the key layout of the character buttons.

abc : Alphabetical key layout.

qwe : Qwerty key layout.

5 Enters a space.

If you erase a character, locate the cursor on

it and touch this button.

6 Clears the character.

7 Exits the Character Entry mode and returns

to the previous screen.

⁄

•

You can enter characters only after you have applied the

parking brake.

English

Screen Control

Setting the monitor screen.

Screen Control

⁄

•

The Screen Control screen is displayed only when you

Display Easy Control panel

have applied the parking brake.

•

The picture quality can be set for each source.

You can set image quality of screens such as menu from

<Monitor Setup> (page 70) of the <Setup Menu>.

Display the Screen Control screen

Mode:Full

AV–OUT:AV–IN

DVD VIDEO

SCRN

DVD VIDEO

Title

C ha p

0:00:05

Adjust the picture quality

D I M

OFF

SYNC

Return

1 Brightness Control

2 Tint Control

Displayed for an NTSC system image on TV,

Video, iPod or Rear View Camera.

3 Color Control

Displayed on the TV, Video, iPod or Rear

View Camera screen only.

4 Contrast Control

5 Black Level Adjustment

6 Dimmer Mode Setup

"ON": The display dims.

"OFF": The display doesn’t dim.

"SYNC": Turning the Dimmer function

On or Off when the vehicle light

control switch is turned On or Off.

7 Returns to the previous screen.

KVT-526DVD/KVT-556DVD

Hands Free Unit Control

Various functions can be used in the Hands Free control mode. (only with the optional accessory Bluetooth

unit connected)

•

You need to register your cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the

Bluetooth Unit as well.

To use the Phonebook, it must have been downloaded from the cell-phone. For more details, see the instruction manual of

your Bluetooth Unit and your cell-phone.

2 Displays the called phone numbers.

If you have registered a phone number in

the Phonebook, the destination person

name is displayed.

Control Screen Function

Displaying the control screen and using various

functions.

3 Calls the displayed preset phone number.

4 Displays the SMS Select screen.

See <SMS (Short Message Service)> (page

57).

Display the Hands-Free Control screen

5 Displays the Search for Phonebook screen.

See <Calling by Phonebook> (page 50).

6 Displays the Outgoing Calls screen.

See <Making a Call Using Call Records>

(page 51).

Press the [FNC] button for more than 1 second.

7 Displays the Incoming Calls screen.

See <Making a Call Using Call Records>

(page 51).

8 Calls the preset phone number.

For information on how to preset a phone

number, see <Phone Number Preset> (page

56).

9 Displays the Hands-Free Set Up screen.

See <Setting Up the Hands-Free Phone>

(page 53).

p Displays the Dialing Display screen.

See <Calling by Entering a Phone Number>

(page 48).

1 Displays the various conditions.

: Displays short message status. If a cell-

phone which supports SMS function

is not connected, this mark does not

appear.

: There is unread short message.

: There is no unread short message.

: Downloading Phonebook.

: Indicates there is a call on hold.

: Displays the signal strength.*

The more the number of bar segments,

the stronger the signal.

q Starts voice recognition.

See <Calling by Voice Recognition> (page

52).

w Returns to the previous screen.

⁄

•

While your car is moving, some functions are disabled for

safety’s sake. The buttons associated with the disabled

functions become ineffective if pressed.

•

When the Hands-Free Control screen appears, the name

of the connected cell-phone is displayed for 5 seconds.

* Since the number of steps of the control unit is different

from that of the cell-phone, the statuses displayed on

the control unit may discord from those displayed on

the cell-phone. No status is displayed if information

about it cannot be obtained.

: Displays the present Auto Answering

status

: When Auto Answering is on

: When Auto Answering is off

: Displays the battery drain of the cell-

phone.*

The more the number of bar segments,

the higher the battery level.

•

Setting the cell-phone in the private mode can disable

the hands-free function.

English

Hands Free Unit Control

When Received a Call

Calling by Entering a Phone Number

When you receive a call, you can use the hands-

free phone.

Makes a call by entering a phone number.

Display the number input screen

Respond to a call

When a call arrives, the Talking screen appears

automatically.

Enter a phone number

1 Starts conversation with a person called.

Switches the call destination if you hear a

tone of call-waiting.

Resumes conversation with the person on

hold after completed conversation with the

other party.

2 Disconnects the phone.

3 Switches the voice output between phone

and speaker.

1 Calls the entered phone number.

2 Creates an SMS for the entered phone

number.

4 Outputs dial tone.

See <Controlling Tone-based Services>

(page 49).

See <SMS (Short Message Service)> (page

57).

3 Clears the number.

4 Returns to the previous screen.

Make a call

Press the phone icon to dial the entered phone

number.

End the call

The Hand Free screen reappears.

⁄

•

You can input max 32 digits.

KVT-526DVD/KVT-556DVD

Quick Dialing

Controlling Tone-based Services

You can register up to 6 phone numbers for quick

dialing.

Uses tone base service using DTMF (Dual Tone

Multi Frequency).

⁄

Display the DTMF input screen

•

Phone numbers must be registered in advance.

See <Phone Number Preset> (page 56).

Display the Talking screen. See <Calling by

Entering a Phone Number> (page 48).

Recall the phone number

You can send tones during a call

Make a call

1 Returns to the previous screen.

English

Hands Free Unit Control

Calling by Phonebook

Cyrillic alphabet search screen

You can call a person using his/her phone

number that you have registered in the

Phonebook.

Display the Phonebook screen

5 Displays the Phonebook beginning with

the name whose first character you have

touched.

Select the name to call

The Initial Input screen appears.

Select the Phonebook search method

You can search by the initial of the Phonebook

data.

Initial alphabet screen

6 Phonebook data list.

"REC" turns on for data with voice for voice

recognition already registered.

7 Scrolls the Phonebook data list.

8 Scrolls the name.

9 Registers the voice for voice recognition to

the selected Phonebook.

If there are already 35 voice tag registered

in the same cell-phone, [Record] button is

deactivated.

1 Displays the Phonebook beginning with

the name whose first character you have

touched.

See <Voice Registration> (page 54).

p Plays the voice registered in the selected

Phonebook data.

2 Scrolls the character array display.

3 Returns to the Hands-Free Control screen.

q Deletes the voice registered in the selected

Phonebook data.

Initial number screen

Touch to display the confirmation screen.

Touch [YES] to delete or [NO] to cancel.

w Displays the detail of the selected

Phonebook data.

e Returns to the Hands-Free Control screen.

4 Displays a list of numbers in the Phonebook

starting with the selected number.

KVT-526DVD/KVT-556DVD

Select the phone number to call

Making a Call Using Call Records

Calls by selecting a phone number from the

outgoing or incoming calls list.

Display the Outgoing Calls or Incoming

Calls screen

r Calls the selected phone number.

t Creates an SMS for the displayed phone

number.

See <SMS (Short Message Service)> (page

57).

y Scrolls the phone number.

u Displays the Phonebook data list.

i Returns to the Hands-Free Control screen.

: Outgoing Calls

: Incoming Calls

The Outgoing Calls or Incoming Calls list screen

appears.

Make a call

Select from calls list

Example : Outgoing Calls screen

⁄

•

To use the Phonebook, it must have been downloaded

from the cell-phone. For more details, see the instruction

manual of your Bluetooth Unit and your cell-phone.

Initials including no corresponding name will not be

displayed.

•

During search, a non-accent character such as "u" is

searched for instead of an accent character such as "ü".

1 Outgoing Calls list.

2 Scrolls the list.

3 Makes a call to the selected number.

4 Creates an SMS for the selected phone

number. See <SMS (Short Message

Service)> (page 57).

5 Displays the detail of the selected phone

number.

6 Returns to the Hands-Free Control screen.

Make a call

⁄

•

The Outgoing Calls list screen or Incoming Calls list

screen shows the list of the calls originated from or

received at this unit. They are not the ones stored in the

cell-phone memory.

English

Hands Free Unit Control

If you hear another Beep sound:

Say the key word within 2 seconds after the

Beep, or touch the [Phonebook List] button to

select the phone number.

Calling by Voice Recognition

Calls by recognizing the registered voice.

⁄

•

In order to perform voice recognition, voice must

be registered in the Phonebook data. See <Voice

Registration> (page 54). Or, to perform voice recognition

by Phone number category (Home, Office, Mobile etc.)

of Phonebook data, a key word voice must be registered.

See <Key Word Voice Registration> (page 55).

Make a call.

⁄

•

If there are more than one phone numbers registered

under the same name, and the key word voice is

registered for each phone number, you will hear another

beep. For how to register key word, see <Key Word Voice

Registration> (page 55).

Display the Voice Recognition screen

If there are more than one phone numbers

registered under the same name, go to step

Select a Phone number category

Say the name registered in the PhoneBook

3 Calls the displayed phone number.

4 Creates an SMS to the displayed address.

See <SMS (Short Message Service)> (page

57).

5 Selects the Phone number category.

6 Scrolls the phone number.

When a beep is heard, say the name within 2

seconds.

7 Displays the Phonebook data list.

8 Returns to the Hands-Free Control screen.

1 Cancels voice recognition.

Make a call

If the voice recognition is succeeded and

there is only one phone number found:

⁄

•

A message is displayed if the voice is not recognized.

Read the message for the further operation.

Make a call.

2 Displays the phonebook list.

KVT-526DVD/KVT-556DVD

7 Sets whether to use cell-phone phonebook,

Setting Up the Hands-Free Phone

outgoing calls list and incoming calls list.

The Hands-Free system can be set as follows.

(

"ON")

"ON": Yes.

"OFF":No.

Display the Hands Free Setup screen

8 Sets the SMS function. ( "ON")

"ON": Use SMS function.

"OFF":SMS not available.

9 Registers the voice to select phone number

category with voice recognition.

See <Key Word Voice Registration> (page

55).

p Registers the phone number to Hands Free

Control screen preset button.

See <Phone Number Preset> (page 56).

q Returns to the Hands-Free Control screen.

Setup each item

⁄

•

Either the time interval for automatic answer set on this

unit or the time interval set on the cell-phone, whichever

is shorter, takes effect.

•

Select the speaker which is further from the microphone

in order to prevent howling or echoes.

1 Moves to the "Hands Free Setup 2" screen.

2 Sets an automatic response time to pick-up

an incoming call. ( "8")

"Off": This function is disabled.

"0-99": Sets the incoming call ringing

duration (in seconds).

3 Sets the beep of the incoming call.

(

"ON")

"ON": Beep is heard.

"OFF":Beep is canceled.

4 Sets the beep of the incoming SMS.

(

"ON")

"ON": Beep is heard.

"OFF":Beep is canceled.

5 Returns to the Hands-Free Control screen.

6 Returns to the "Hands Free Setup 1" screen.

English

Hands Free Unit Control

Voice Registration

End voice registration

Registers voice for voice recognition in

Phonebook. Up to 35 voices can be recorded for

one cell-phone.

Select the name to register

Go through the procedure of <Calling by

Phonebook> (page 50).

⁄

•

A message is displayed if the voice is not recognized.

Read the message for the further operation.

Repeat from 1st try if the voice is different from the 1st

try.

•

1 Selects a name.

"REC" turns on for data with voice for voice

recognition already registered.

Display the voice registration screen

Say the name to register (1st try)

2 Registers the voice.

3 Cancels voice registration.

Say within 2 seconds after the Beep.

Say the name to register (2nd try)

KVT-526DVD/KVT-556DVD

Say the name to register (1st try)

Key Word Voice Registration

Registers the voice to select the Phone number

category by Voice Recognition.

Display the Key Word List screen

Display the "Hands Free" screen and touch

[Setup]. See <Control Screen Function> (page

47).

6 Registers the voice.

7 Cancels voice registration.

Say within 2 seconds after the Beep.

Say the name to register (2nd try)

Select the Phone number category to

End voice registration

1 Selects the Phone number category. "REC"

turns on for data with voice for voice

recognition already registered.

⁄

2 Registers voice for the selected Phone

number category.

3 Plays voice registered for the selected

Phone number category.

4 Deletes voice registered for the selected

Phone number category. Touch to display

the confirmation screen. Touch [YES] to

delete or [NO] to cancel.

•

A message is displayed if the voice is not recognized.

Read tha message for the further operation.

Repeat from 1st try if the voice is different from the 1st

try.

•

5 Returns to the Hands-Free Setup screen.

Display voice registration screen

English

Hands Free Unit Control

Phone Number Preset

p Deletes the currently displayed phone

number.

q Returns to the previous screen.

Registers frequently used phone number to

Hands Free control screen preset button.

Search phone number to register with

each function

Display the Hands Free Preset List screen

Display the "Hands Free" screen and touch

[Setup]. See <Control Screen Function> (page

47).

⁄

•

Press [Delete] to delete the registered phone number.

Select the Preset number to register

1 Returns to the Hands-Free Set Up screen.

Select the search destination of the

number to register

2 Registers from SMS incoming calls list.

3 Registers from SMS outgoing calls list.

4 Registers from Phonebook.

5 Registers from outgoing calls list.

6 Registers from incoming calls list.

7 Registers by entering phone numbers.

8 Registers voice for voice recognition to

preset number.

9 Registers the currently displayed phone

number.

KVT-526DVD/KVT-556DVD

SMS Message screen

SMS (Short Message Service)

Uses SMS function.

Display the SMS Select screen

p Calls the number in the selected message.

q Creates a new message for the selected

message.

w Scrolls the message.

Select a function

e Returns to the previous screen.

Create a message

1 Displays received message list.

2 Displays sent message list.

r Moves the cursor.

t Displays remaining number of characters

allowed.

y Enters character.

u Changes keyboard character type.

i Sends the message.

o Sets the key layout of the character buttons.

abc : Alphabetical key layout.

qwe : Qwerty key layout.

3 Displays the Message screen. If there is an

unfinished message, the button will be

active.

4 Retrieves SMS messages from the cell-

phone.

5 Returns to the Hands-Free Control screen.

Select message to display

; Enters space.

a Erases the entered character.

If pressed more than 1 second, all the input

characters are erased.

s Returns to the previous screen.

6 Calls the number in the selected message.

7 Creates a new message for the selected

message.

8 Scrolls the list.

9 Displays the selected message.

English

Setup Menu

You can set up various receiver parameters.

Setup Menu

Audio Setup

Displays the Setup menu to set various functions.

You can setup a speaker network, etc.

Display the control screen of any source

Display the Audio SETUP screen

Touch

in the "Setup

Menu" screen (page 58).

⁄

•

[Audio Setup] cannot be selected under the following

conditions:

– When no source is selected.

– When dual zone function is set to on. See <Zone

Control> (page 82)

Touch any source button on the "Source Select"

screen.

Setup each item

Display the Setup Menu

1 Selects the speaker to set the crossover. See

<Crossover Network Setup> (page 59).

2 Sets the availability of subwoofers. This can

be selected only when Preout is set to "Sub".

See <System Setup> (page 62).

3 Selects the type of front speakers.

"Standard": Setup for general diameter

speakers

Select the setup item

"Narrow": Setup for small diameter

speakers

"Middle": Setup for middle diameter

speakers

1 The selected setup screen appears.

2 Scrolls the setup menu.

"Wide":

Setup for large diameter

speakers

⁄

•

[Audio Setup] and [AV Interface] options can be locked.

The key mark ( ) is displayed in reverse video for the

locked option. See <Setup Memory> (page 79).

4 Switches to the crossover setup screen.

See <Crossover Network Setup> (page 59).

KVT-526DVD/KVT-556DVD

Crossover Network Setup

DVD Setup

You can set a crossover frequency of speakers.

You can set up the DVD play.

Select the speaker to set the crossover

Display the DVD Setup screen

Touch

in the "Setup

Menu" screen (page 58).

Setup each item

1 Sets the High Pass Filter of the front speaker.

2 Sets the High Pass Filter of the rear speaker.

3 Sets the Low Pass Filter of the sub woofer.

4 Switches to the crossover setup screen.

1 Moves to the "DVD Setup 2" screen.

2 Selects a disc menu language.*¹

(See <Language Setup>, page 60)

3 Selects a subtitle language.*¹

(See <Language Setup>, page 60)

4 Selects an audio language.*¹

(See <Language Setup>, page 60)

Display the Crossover setup screen

Set the crossover

5 Sets the dynamic range.*¹( "Wide")

The dynamic range is reduced by changing

from "Wide" to "Normal" and from "Normal"

to "Dialog". "Dialog" makes the total sound

volume becomes larger as compared with

"Wide" and "Normal", allowing you to listen

to the movie's dialog more clearly.

This is effective only when you are using a

Dolby Digital software.

5 Sets the cross over frequency.

When front speaker or rear speaker is

selected in step 1:

The operation is available during the play

stop mode.

High Pass Filter adjustment

When Subwoofer is selected in step 1:

Low Pass Filter adjustment

6 Sets the sub woofer phase. (Only when

"Subwoofer" is set to "ON" in Audio Setup

and "LPF SUB FREQ" is set to other than

"Through")

7 Returns to the "Audio Setup" screen.

Next page 3

English

Setup Menu

Language Setup

Selects a language you use for the speech and

menus.

Select the language item to set

See <DVD Setup> (page 59) and select [Menu

Language], [Subtitle Language] or [Audio

Language].

6 Returns to the "DVD Setup 1" screen.

7 Sets an angle mark display.*¹( "On")

8 Selects the screen display mode.*¹

(

"16:9")

"16:9": Displays wide pictures.

"4:3 LB": Displays wide pictures in the Letter

Box format (having black stripes at

the top and bottom of screen).

"4:3 PS": Displays wide pictures in the Pan &

Scan format (showing pictures cut

at the right and left ends).

Display the Language Setup screen

9 Displays the Parental Lock screen.*¹

(

"Off")

(See <Parental Level Setup>, page 61)

⁄

•

* Disabled when a DVD is being played.

1 Enters a language code.

2 Cancels the language setup and returns to

the "DVD Setup 1" screen.

3 Sets the original audio language.

(It appears during Audio Language setup.)

4 Sets the language and returns to the "DVD

Setup 1" screen.

(It appears after you have entered a

language code.)

5 Clears the language code.

Enter a language code

See <DVD Language Codes> (page 89) and

select the desired language.

Set the language you use

KVT-526DVD/KVT-556DVD

Select a parental level and complete the

setup

Parental Level Setup

Sets a parental level.

Display the Parental Level code number

screen

See <DVD Setup> (page 59) and touch

[Parental Level].

6 Selects a parental level.

7 Complete the parental level setup and

returns to the "DVD Setup 2" screen.

⁄

•

If a disc has higher parental lock level, you need to enter

the code number.

The parental lock level varies depending on a loaded

disc.

If a disc has no parental lock, anybody can play it back

even when you have set the parental lock.

Enter the code number

1 Enters a code number.

2 Cancels the current setup and returns to

the "DVD Setup 2" screen.

3 Indicates the present parental lock level.

4 Determines the code number and displays

the Parental Level setup screen.

5 Clears the code number.

⁄

•

The number you enter first is set as your code number.

You can clear the code number by pressing the Reset

button.

Display the Parental Level Setup screen

English

Setup Menu

DivX Setup

System Setup

Checks the registration code. This code is needed

when making a disc which has DRM (Digital

Rights Management).

You can set up the system parameters.

Display the System Setup screen

Touch

Menu" screen (page 58).

in the "Setup

Display the DivX Setup screen

Touch

Menu" screen (page 58).

in the "Setup

Setup each item

1 Moves to the "System Setup 2" screen.

2 Turns the key touch tone On or Off.

(

"ON")

1 Displays the registration code.

3 Allows scrolling of text display on the

⁄

Source Control screen. ( "Auto")

•

When downloading a DivX VOD file controlled by DRM,

one above. Otherwise the file may not be able to play

with this unit. Remaining number of viewing is displayed

when playing a DivX VOD file with the viewing restriction.

When the remaining number of viewing reached 0, a

warning message appears and the file cannot be played.

"Auto":

Scrolls the screen automatically.

"Manual": Allows you to scroll the screen

manually.

4 Selects a remote control signal. ( "ON")

When turned "OFF", the remote control of

TV reception is rejected.

5 Sets a music CD playback. ( "1")

"1": Automatically recognizes and plays

back an Audio file disc, a DVD or a

music CD.

"2": Forcibly plays back a disc as a music

CD. Select "2" if you wish to play a

music CD having a special format or

if you cannot play a disc in the "1"

position.

⁄

•

You cannot play an Audio file/VCD disc in the "2"

position. Also, you may not play some music CDs in the

"2" position.

•

Your setup is disabled when the disc is being played.

KVT-526DVD/KVT-556DVD

6 Returns to the "System Setup 1" screen.

7 Moves to the "System Setup 3" screen.

8 Sets the button illumination color.

See <Panel Color Coordinate> (page 63).

9 When set to "ON", the illumination color of

the screen and buttons changes one after

another.

t Returns to the "System Setup 3" screen.

y Selects a picture display time. ( "Long")

The Display of a JPEG picture is changed.

("Short", "Middle", "Long")

p Select an illumination color of receiver

buttons. ( "Red")

Panel Color Coordinate

Sets the screen and button illumination color.

"Green": Green

"Red": Red

Display the Panel Color Coordinate screen

See <System Setup> (page 62).

Select a color

q Returns to the "System Setup 2" screen.

w Moves to the "System Setup 4" screen.

e Sets the Preout output. (Settable only when

in Standby mode)

"Rear" : Rear sound is output.

"Sub" : Subwoofer sound is output.

r Sets the function of the [NAV] button.

"V. OFF" : Press the [NAV] button for

more than 1 second to turn the

display off.

1 Sets to the touched color.

2 Sets and registers favorite color.

3 Returns to the "System Setup 2" screen.

"R-CAM" : Press the [NAV] button for more

than 1 second to switch to rear

view.

Next page 3

English

Setup Menu

To register your original color

AV Interface Setup

You can set audio and visual (AV) interface

parameters.

Start the RGB coordinate

Display the AV Interface screen

Touch

in the "Setup

Adjust each color value

Menu" screen (page 58).

Setup each item

1 Selects a preset number to register.

2 Adjusts the Red value.

3 Adjusts the Green value.

4 Adjusts the Blue value.

5 Returns to the "Panel Color Coordinate"

1 Moves to the "AV Interface 2" screen.

2 Sets a name to be displayed when you

select a system that is connected via the AV

INPUT port. ( "VIDEO")

screen.

When using the rear view camera, set it to

"R-CAM".

Select a Preset number to register

3 Sets an image display of the system that is

connected via the AV INPUT port. ( "OFF")

"OFF":When the image source is switched,

an image entered via the AV INPUT

port is displayed.

"ON": When an image signal is entered

via the AV INPUT port, this image is

displayed.

Adjusted color is registered to the selected

Preset button.

4 Selects a navigation system connection.

(

"RGB")

Complete the color coordination

"RGB": Allows the Kenwood's Navigation

System to connect via the AV INPUT

port.

"AV-IN": Allows a third-party navigation

system to connect via the AV INPUT

port.

"Off": Must be used if no navigation

system is connected. (The

navigation display is cancelled

when the AV source is switched.)

KVT-526DVD/KVT-556DVD

: Press for # seconds.

5 Returns to the "AV Interface 1" screen.

6 Moves to the "AV Interface 3" screen.

7 Selects an AV source to be output at the AV

OUTPUT port. ( "AV-IN")

q Returns to the "AV Interface 2" screen.

w Selects speakers used for voice guidance of

the navigation system. ( "Front LR")

"Front L": Uses the front left side speaker

for voice guidance.

⁄

"Front R": Uses the front right side speaker

for voice guidance.

"Front LR": Uses both front speakers for

voice guidance.

•

When in DVD source, "AV-OUT" cannot be set to USB. Or,

when in USB source, "AV-OUT" cannot be set to DVD.

If "AV-OUT" is set to DVD or USB, the same source video

or control screen as the front monitor is displayed in the

rear monitor.

•

e Adjusts the volume for voice guidance of

the navigation system. ( "23")

r Mutes the volume during voice guidance of

the navigation system. ( "ON")

When turned "ON", the volume level drops

for voice guidance.

•

If the front source is switched from DVD (or USB) to

another source, the rear source is also switched to

the same source as front. In this case, displaying the

navigation screen in front monitor allows the rear source

to return to the DVD (or USB). Use the easy control

buttons to operate the front source.

8 Sets output of operation screen such as

control screen to AV-OUT. Operation screen

is not output when set to "Black".

(

"Through")

9 Sets a method to switch to the rear view

camera video display. ( "OFF")

"ON": Switches to the rear view camera

video display when "Reverse" gear is

engaged.

"OFF":Switches to the rear view camera

video display when "Reverse" gear

is engaged, and then pressing the

[NAV] button for more than 1 second.

Make sure to set the AV-IN Name 2 to

"R-CAM" to activate R-CAM Interruption

function.

p You can flip the left and right of the rear

view camera video display. Set to "ON" and

the the rear view will be displayed left and

right in mirror image on the screen.

(

"OFF")

English

Setup Menu

8 Sets an on-screen display of the iPod

Playback screen. ( "Auto")

User Interface

You can set up user interface parameters.

"Auto": Information is displayed for 5

seconds when updated.

"Manual": Information is displayed when you

touch on the screen.

Display the User Interface screen

Touch

in the "Setup

Menu" screen (page 58).

9 Sets an on-screen display of the navigation

screen. ( "Off")

Setup each item

"Auto": Information is displayed for 5

seconds when updated.

"Off": Information is not displayed.

p Sets an on-screen display of the AV-IN

playback screen. ( "Auto")

"Auto": Information is displayed for 5

seconds when updated.

"Manual": Information is displayed when you

touch on the screen.

1 Moves to the "User Interface 2" screen.

2 Selects the background to display.

"Change": Displays images entered into this

unit. See <Background Select>

(page 69).

3 Enables entering or deleting of background

images into or from this unit.

Press

to enter the USB suspend

mode, and then remove the USB device.

"Memory": Enables entering of background

images. See <Entering

q Returns to the "User Interface 2" screen.

w Moves to the "User Interface 4" screen.

e Sets an on-screen display of the DVD

Playback screen. ( "Manual")

Background> (page 68).

"Delete": Enables deleting of background

image entered into this unit. See

<Background Delete> (page 68).

4 Sets whether to display the target when

touching the panel.

"Auto": Information is displayed for 5

seconds when updated.

"Manual": Information is displayed when you

touch on the screen.

5 Sets the display method of the

unrecognized characters.

r Sets an on-screen display of the TV screen.

"ON": Displays in the Russian character.

"OFF": Displays in the European character.

(

"Auto") (with the optional accessory TV

tuner connected only)

"Auto": Information is displayed for 5

seconds when updated.

"Manual": Information is displayed when you

touch on the screen.

t Sets an on-screen display of the USB screen.

(

"Auto")

"Auto": Information is displayed for 5

seconds when updated.

"Manual": Information is displayed when you

touch on the screen.

6 Returns to the "User Interface 1" screen.

7 Moves to the "User Interface 3" screen.

KVT-526DVD/KVT-556DVD

Direct Source Button Setup

Registers the source displayed in the favorite

source screen.

Displays the Direct SRC button Setup

screen

y Returns to the "User Interface 3" screen.

u Sets whether to display the name of the

, and

buttons on the

right side of the menu screen.

i Registers the source displayed in the

favorite source screen.

See <Direct Source Button Setup> (page

67).

See <User Interface> (page 66).

Select a preset button

1 Selects the preset button to register.

2 Selects the source to register.

3 Scrolls the source button list.

4 Returns to the "User Interface 4" screen.

Select a source to register

Complete the registration

The selected source is registered to the preset

button.

English

Setup Menu

Entering Background

Background Delete

Loads a image for background.

Deletes the background image.

Connect the device which has the image to

load

1 Delete the image you have loaded

Display the User Interface screen

Touch

in the "Setup

Menu" screen (page 58).

Display the Background Memory screen

Confirm

Select the image to load

1 Returns to the "User Interface" screen.

⁄

•

This operation is not possible when USB/DVD is selected

as the source.

1 Lists the files.

2 Scroll the list.

3 Returns to Media Select screen.

4 Returns to the previous folder.

5 Returns to the "User Interface" screen.

Load the image

6 Rotates the image.

7 Returns to the Picture Select screen.

⁄

•

See <About Picture files> (page 6) for readable image

specifications.

•

This operation is not possible when USB /DVD is selected

as the source.

KVT-526DVD/KVT-556DVD

Background Select

Touch Panel Adjustment

Selects a image for background.

You can adjust the touch panel operations.

Select Background Change screen

Display the Touch panel Adjustment

screen

Touch

in the "Setup

Menu" screen (page 58).

Start Touch panel setup

Select a image for background

Adjust the Touch panel

1 Returns to the initial background.

2 Returns to the original screen.

Set the image as the background

Follow the instruction on the screen and touch

the center of

1 Cancels the adjustment and returns to the

Touch Panel Adjust screen.

2 Resets to the initial status.

⁄

•

This operation is not possible when USB/DVD is selected

as the source.

English

Setup Menu

Clock Setup

Monitor Setup

You can adjust the clock time.

You can adjust the position, picture quality and

the screen mode of the monitor.

Display the Clock Setup screen

Displaying the Monitor SETUP screen

Touch

Menu" screen (page 58).

in the "Setup

Touch

in the "Setup

Menu" screen (page 58).

Setup the Clock

Setup each item

1 Clock time display

2 Adjusts hours.

3 Adjusts minutes.

4 Sets "00" minute.

1 Moves to "Angle Control" screen.

2 Brightness Control

3 Contrast Control

Setup examples: 3:00 – 3:29 \ 3:00

3:30 – 3:59 \ 4:00

5 Sets the clock time in synchronization with

the time data sent from the navigation

system or the RDS station.

4 Black Level Adjustment

5 Dimmer Mode Setup

"ON": The display dims.

"OFF": The display doesn’t dim.

"SYNC": Turning the Dimmer function

On or Off when the vehicle light

control switch is turned On or Off.

When the synchronized mode is set, the

clock cannot be adjusted manually.

⁄

Adjust the clock time

•

In this Screen Control screen, you can perform setups for

the menu screen. Setups for videos such as DVD can be

performed on the <Screen Control> (page 46).

6 Returns to the "Screen Adjust" screen.

7 Moves to "Mode Select 1" screen.

8 Monitor Angle Adjustment

9 Forward/Backward Monitor Position

Adjustment

p Monitor Open/Close Setup

When turned "ON", the monitor is opened

or closed automatically when you turn on

or off the ignition key.

KVT-526DVD/KVT-556DVD

q Monitor Action Setup

When set to "Quick", the monitor is opened

quickly.

; Selects a screen mode of the rear view

camera (R-CAM) screen.

You can select any of the following screen

mode.

"Full", "Just", "Zoom", "Normal"

⁄

•

When you select the Menu or Navigation, the display is

shown in the full-size display mode automatically. The

screen mode of these displays cannot be changed.

The picture quality can be set for each source.

•

Full picture mode ("Full")

w Returns to the "Angle Control" screen.

e Moves to the "Mode Select 2" screen.

r Selects a screen mode of the DVD playback

screen.

You can select any of the following screen

mode.

"Full", "Just", "Zoom", "Normal"

t Selects a screen mode of the iPod VIDEO

playback screen.

You can select any of the following screen

mode.

"Full", "Just", "Zoom", "Normal"

y Selects a screen mode of the USB playback

screen.

Zoom picture mode ("Zoom")

Justify picture mode ("Just")

Normal picture mode ("Normal")

You can select any of the following screen

mode.

"Full", "Just", "Zoom", "Normal"

u Returns to the "Mode Select 1" screen.

i Selects a screen mode of the TV screen.

You can select any of the following screen

mode.

"Full", "Just", "Zoom", "Normal"

o Selects a screen mode of the VIDEO

playback screen.

You can select any of the following screen

mode.

"Full", "Just", "Zoom", "Normal"

English

Setup Menu

Reenter the security code

Security Code Setup

You can set a security code to protect your

receiver system against theft.

⁄

•

When the Security Code function is activated, the code

cannot be changed and the function cannot be released.

Note the Security Code can be set as the 4 digit number

of your choice.

Reenter the same security code as that you

have entered in Step 3 for confirmation.

Display the Security Code Setup screen

⁄

Touch

Menu" screen (page 58).

in the "Setup

•

If you enter a different security code, the screen returns

to Step 3 (for the first code entry).

Now, your security code is registered.

If you press the Reset button or if you

disconnect your receiver from the battery after

the code registration, you need to enter the

registered security code.

1 Displays the Security code input screen.

2 Turns the SI function on or off.

If turned "ON", the security indicator on

the front panel flashes when the vehicle

ignition is off.

If you have pressed the Reset button or if

you have disconnected the Receiver from

battery...

(

"ON")

Enter the correct security code

Start Security Code setup

⁄

•

If you have already completed the code registration,

is displayed.

You must enter the same security code as that

you have entered in Step 3.

Enter a security Code

Enter the security code

Now, you can use your Receiver.

Input four-digit number.

KVT-526DVD/KVT-556DVD

Deactivating Security Code

iPod Setup

To deactivate the Security Code function.

Performs setup when using iPod.

Display Security Code Setup screen

Display the iPod Setup screen

Touch

in the "Setup

Touch

in the "Setup

Menu" screen (page 58).

Start to cancel a registration of the

Security Code

Setup each item

1 Sets the Audio book playback speed.

2 Sets Wide Screen on or off.

Enter a security Code

⁄

•

"Wide Screen" cannot be set while the iPod is connected.

Input by four-digit number.

Now, your security code is cleared.

English

Setup Menu

TV Setup

RDS Setup

The TV signal receiving areas can be set. (with the

optional accessory TV Tuner connected only)

You can set RDS related parameters.

Display the RDS Setup screen

Displaying TV Setup screen

Touch

Menu" screen (page 58).

in the "Setup

Touch

Menu" screen (page 58).

in the "Setup

Setup each item

Setting up TV

1 Moves to "RDS Setup 2" screen.

1 Moves to "TV2 Area Set" screen.

2 Sets a news bulletin interrupt time.

2 Sets the present TV1 receiving area.

3 Turns the Alternative Frequency function

On or Off. ( "ON")

4 Turns the Region Restriction function On or

Off. ( "ON")

5 Turns the Auto TP Seek function On or Off.

(

"ON")

3 Returns to the "TV1 Area Set" screen.

4 Sets the present TV2 receiving area.

6 Returns to the "RDS Setup 1" screen.

7 Selects a display language for the PTY

function.

KVT-526DVD/KVT-556DVD

Bluetooth Setup

Registering Bluetooth Unit

Registers and selects Bluetooth unit.

Registers the Bluetooth unit to be connected.

Display the Bluetooth Setup screen

1 Display the Connect Device List screen

Touch

in the "Setup

Menu" screen (page 58).

Setup each item

Search for a Bluetooth unit

1 Sets cell-phone for Hands Free and Audio

player for Bluetooth Audio.

2 Sets the PIN code of Bluetooth unit to enter

when registering (pairing) from the cell-

phone or audio player side.

3 Sets the speakers to output phone call

voice/ ringing tone/ Bluetooth audio.

1 Displays the registered Bluetooth unit.

Displays the busy service in red. Displays

the available service in gray.

2 Scrolls the name of the Bluetooth unit.

3 Searches for Bluetooth unit.

4 Registers a Bluetooth unit that cannot

be registered by normal register (pairing)

operation.

(

"Front Only")

"Front Only": Outputs from the front

speakers.

"All":

Outputs from all the speakers.

5 Returns to the previous screen.

⁄

•

A new device cannot be registered if there are already 5

Bluetooth units registered. Delete one of the registered

units. See <Deleting Bluetooth Unit> (page 78).

Select the Bluetooth unit to register

6 Displays the searched Bluetooth unit.

7 Scrolls the name of the Bluetooth unit.

8 Cancels searching of Bluetooth unit.

9 Starts search.

p Scrolls.

Next page 3

English

Setup Menu

q Returns to the previous screen.

Registering Bluetooth Unit PIN Code

Enter PIN code

Sets the PIN code of the Bluetooth unit to enter

when registering (pairing) from the cell-phone or

audio player side.

Enter the PIN code specified for the Bluetooth

unit to register.

Display the Receiver PIN Code screen

w Enters a code number using the keypad.

e Cancels registration of PIN code.

r Confirms the entered PIN code.

Enter the PIN code specified for the

Bluetooth unit you are registering.

t Clears the code number.

Enter PIN code

⁄

•

You can also register from the Bluetooth unit side. For

the PIN code necessary for registration, see <Registering

Bluetooth Unit PIN Code> (page 76).

•

If the error message appears even though the PIN code

is correct, try <Registering Special Bluetooth Unit> (page

77).

1 Enters a code number using the keypad.

2 Cancels registration of PIN code.

3 Registers the entered PIN code.

4 Clears the code number.

KVT-526DVD/KVT-556DVD

Bluetooth Unit Connection

Registering Special Bluetooth Unit

Selects the Bluetooth unit to connect.

Registers Special Bluetooth unit, that resulted in

error by normal registration method, by selecting

from the listed models.

Display the Connect Device List screen

Display the Special Device List screen

Select a registered Bluetooth unit

Select a model name

1 Displays the registered Bluetooth unit.

2 Scrolls the name of the Bluetooth unit.

3 Returns to the previous screen.

1 Displays the Bluetooth unit name that can

be registered.

2 Scrolls the name of the Bluetooth unit.

3 Scrolls.

Select the service to use

4 Returns to the previous screen.

Confirm whether to register

4 Connects/disconnects cell-phone to use for

Hands Free.

5 Connects/disconnects Audio player to use

for Bluetooth Audio.

6 Deletes registration (pairing).

7 Returns to the previous screen.

5 Cancels registration.

⁄

•

Only models in Bluetooth unit name list can be

registered.

Go through the procedure of <Registering

Bluetooth Unit> (page 75) and complete

the registration (pairing).

English

Setup Menu

Deleting Bluetooth Unit

Software Information

Deletes the registered Bluetooth unit.

Checks the software version of this unit.

Display the Connect Device List screen

Display the Software Information screen

Touch

in the "Setup

Menu" screen (page 58).

Select a Bluetooth unit to delete

1 Displays the software keycode.

2 Displays the software version.

Delete the Bluetooth unit

Confirm deleting of Bluetooth unit

KVT-526DVD/KVT-556DVD

Memorize or recall the settings

Setup Memory

Audio Setup and AV Interface settings can be

memorized. The memorized settings can be

recalled at any time. For example, even when the

settings are cleared due to replacement of the

battery, the settings can be restored.

When memorizing the Audio Setup and AV

Interface settings:

Display the Setup Memory screen

If settings have already been memorized, a

confirmation message appears. Touch

To cancel memorization, touch

Touch

Menu" screen (page 58).

in the "Setup

When recalling the memorized settings:

Touching the screen displays a confirmation

message. Touch

touch

. To cancel recalling,

When clearing the currently memorized

settings:

1 Locks the Audio Setup and AV Interface

settings. When is selected, you

cannot set the Audio Setup and AV

Interface settings.

2 Memorizes or recalls the settings. To cancel

Touching the screen displays a confirmation

message. Touch

touch

. To cancel clearing,

the function, touch

memorization, touch

. To cancel

The "Setup Menu" screen appears again.

Quit memorization/recalling of settings

Start Setup Memory

3 Recalls the memorized settings.

4 Memorizes the current Audio Set Up and AV

Interface settings.

5 Clears the currently memorized settings.

6 Returns to "Setup Memory" screen.

English

Audio Control

Audio Control Menu

Audio Control

Displays the Audio Control menu to set the sound

effect function of this unit.

You can adjust the front/rear and right/left audio

balance.

Display the control screen of any source

Display Audio Control screen

Touch

in the "Audio

Control Menu" screen (page 80).

Set the each item

Touch any source button on the "Source Select"

screen.

Display the Audio Control menu

1 Moves to the "Audio Control 2" screen.

2 Adjusts the front/back and left/right

balance of the volume by touching the

adjust screen.

3 Adjusts the right and left volume balance.

4 Adjusts the front and rear volume balance.*

5 Turns the Loudness control function On or

Off.*

Select the Audio Control item

If turned "ON", high and low tones are

automatically enhanced during low volume.

6 Displays the present source information.

The stream (Dolby Digital, dts, Linear PCM,

MPEG, MP3, WMA or AAC) is displayed.

1 Switches to the selected Audio Control

screen.

KVT-526DVD/KVT-556DVD

Equalizer Control

You can set up the equalizer.

Display Equalizer Control

Touch

in the "Audio

Control Menu" screen (page 80).

Display the Equalizer screen

7 Returns to the "Audio Control 1" screen.

8 Adjusts the subwoofer volume.*

9 Adjusts the volume of the present source

based on the difference level of original

volume.

⁄

•

*Settable Only when zone function is set to Off. See

<Zone Control> (page 82).

•

If you have increased the volume first, then reduced the

volume using the "Vol. Offset", the sound generated if

you suddenly switch to another source may be extremely

loud.

1 Selects an equalizer curve type.

You can select any of the following

equalizer curves.

• "Natural"

• "Rock"

• "Pops"

• "Easy"

• "Top40"

• "Jazz"

• "User"

⁄

•

"User" can be selected after tone adjustment is carried

out. See <Tone Setup> (page 82).

2 Selects items to be adjusted for tone curve

setup.

If turned "OFF", only Level can be setup for

tone curves.

3 Displays the Tone curve setup screen. (page

82)

English

Audio Control

Tone Setup

Zone Control

You can set a Tone curve.

You can set the front and rear audio source.

Display the Tone screen

Display Zone Control

Touch

in the "Audio

Control Menu" screen (page 80).

See <Equalizer Control> (page 81).

Set the Tone

1 Displays the current source.

Set the Zone Control

1 Tone curve becomes flat.

2 Bass adjustment items are displayed.

3 Middle adjustment items are displayed.

4 Treble adjustment items are displayed.

5 Sets the Center frequency.

6 Sets the level.

7 Sets the Q factor. (Only Bass and Middle can

be set)

8 Bass DC Extend settings (Only when Bass is

selected)

2 Turns the Zone Function (that sets different

source sounds for front and rear speakers)

On or Off.

3 Sets the front and rear audio source

separately.

(This button appears when the Zone

function is On.)

If turned "ON", it extends the bass

center frequency to the low register by

approximately 20%.

⁄

•

When the rear speaker sound is switched, the audio

source that is output at the AV OUTPUT terminal is also

switched to the same source.

9 Returns to the "Equalizer" screen.

4 Adjusts the volume of the rear channel.

(This button appears when the Zone

function is On.)

KVT-526DVD/KVT-556DVD

⁄

•

There are following limitations when zone function is set

to "On".

- There is no output from the subwoofer.

- <Audio Setup> (page 58) and <Equalizer Control>

(page 81) are not available.

- When "DVD" or "USB" is selected as the front source, the

rear source can be selected from "Front" (same source

as front), "iPod" or "VIDEO", etc. When the rear source is

set to "Front", "DVD" or "USB", the same source screen or

control screen is displayed in the rear monitor. See <AV

Interface Setup> (page 64).

English

Remote Controller

For KVT-556DVD : This unit can be operated using the Remote Controller supplied with this unit.

For KVT-526DVD : Optional Remote Controller KNA-RCDV331/ KNA-RCDV340 is designed for controlling this

unit. Refer to the instruction manual that comes with KNA-RCDV331/ KNA-RCDV340.

¤CAUTION

•

Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could

result, if the Remote Controller falls down and gets wedged under the pedals while driving.

Do not leave the battery near fire or under direct sunlight. A fire, explosion or excessive heat generation may result.

Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause the battery to leak

fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician.

Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a

physician.

•

Battery Installation

Remote Controller Mode Switch

Use two "AAA"/"R03"-size batteries.

Insert the batteries with the + and – poles aligned

properly, following the illustration inside the case.

The functions operated from the remote

controller differ depending on the position of the

mode switch.

DISP

SRC

V.SEL

MODE FNC/PBC

TOP MENU

DVD SETUP

ANGLE

RETURN

ZOOM

AUDIO

SUBTITLE

ꢀꢁ

ꢅ

AUD

DVD

T V

AUD

DVD

ENTER

AM−

OPEN

VOL

ꢂ

ꢃ

2ZONE

2^ABC3DEF

ꢄ

ꢀ

R.VOL

ꢁ

4GHI 5JKL 6MNO

7PQRS 8^TUV9WXYZ

CLEAR

DIRECT

ATT

⁄

AUD mode

•

If the Remote Controller operates only over shorter

distances or does not operate at all, it is possible that

the batteries are depleted. In such instances, replace the

both batteries with new ones.

Switch to this mode when controlling a selected

source or tuner source, etc.

DVD mode

Switch to this mode when playing DVDs or CDs etc.

with the player integrated in this unit.

TV mode

Switch to this mode when controlling TV.

⁄

•

The position of the remote control mode switch is

indicated in the title of each mode, e.g., "(AUD mode)".

When controlling a player that is not integrated in the

unit, select "AUD" mode.

•

KVT-526DVD/KVT-556DVD

OPEN

Common Operations (AUD mode)

Opens or closes the monitor each time you press

Source switching

Switches to the source to be played.

the key.

AUD•

DVD•

T V•

ENTER

DISP

SRC

V.SEL

MODE FNC/PBC

AM−

OPEN

TOP MENU

DVD SETUP

ANGLE

RETURN

ZOOM

VOL

AUDIO

SUBTITLE

ꢀꢁ

ꢅ

Cursor key

Volume control

Moves the cursor when displaying menu.

Adjusts the volume.

ꢀꢁ

ꢅ

AUD•

DVD•

T V•

AM−

OPEN

ENTER

VOL

ꢂ

ꢃ

AM−

OPEN

2ZONE

2^ABC3DEF

ENTER

Enters options.

Volume attenuator

Press the key once to lower the volume. Press again

to restore the previous volume.

ꢀꢁ

ꢅ

AUD

DVD

T V

•

R.VOL

•

ENTER

7PQRS 8^TUV9WXYZ

ꢁ

CLEAR

DIRECT

ATT

AM−

OPEN

Hands-free communication

When a call comes in, it answers the call.

Dual Zone

Switches the Dual Zone function ON and OFF.

AM−

OPEN

−

OPEN

VOL

ꢂ

ꢃ

ꢂ

ꢃ

2ZONE

2^ABC3DEF

2ZONE

2^ABC3DEF

ꢄ

ꢀ

4GHI 5JKL 6MNO

R.VOL

Function

Switches the function screen.

Rear volume control

Adjusts volume at rear when the Dual Zone

DISP

function is ON.

SRC

V.SEL

MODE FNC/PBC

2ZONE

TOP MENU

DVD SETUP

ANGLE

RETURN

ZOOM

2^ABC3DEF

ꢄ

ꢀ

R.VOL

ꢁ

AUDIO

SUBTITLE

4GHI 5JKL 6MNO

ꢀꢁ

ꢅ

7PQRS 8^TUV9WXYZ

CLEAR

DIRECT

ATT

MODE

Switches the screen mode.

Screen mode changes each time you press this key.

V.SEL

Switches to the navigation screen.

DISP

SRC

V.SEL

SRC

V.SEL

MODE FNC/PBC

TOP MENU

DVD SETUP

ANGLE

RETURN

ZOOM

TOP MENU

DVD SETUP

ANGLE

RETURN

ZOOM

AUDIO

SUBTITLE

AUDIO

SUBTITLE

ꢀꢁ

ꢅ

ꢀꢁ

ꢅ

English

Remote Controller

VCD 1.X, VCD 2.X (PBC OFF)

DVD/VCD (DVD mode)

Track number

Cancel

Track search and file search

Selects the track or file to be played.

VCD 2.X (PBC ON)

AM−

OPEN

VOL

ꢂ

ꢃ

Scene number

Number

2ZONE

2^ABC3DEF

ꢄ

Cancel

Play/Pause

Pauses the track.

Once you have switched to the direct search

feature, specify the search number from the

numeric keypad, and then press [ENTER] key.

Press again to resume playing.

TOP MENU

DVD SETUP

RETURN

AUDIO

SUBTITLE

ANGLE

ZOOM

ꢀꢁ

ꢅ

Numeric keypad

ꢃ

AUD

•

2ZONE

2^ABC3DEF

DVD

ENTER

ꢄ

ꢀ

R.VOL

ꢁ

4GHI 5JKL 6MNO

Stop

7PQRS 8^TUV9WXYZ

CLEAR

DIRECT

ATT

Memorizes the last point where the disc stopped.

When pressed again, the last point is deleted.

TOP MENU

AUDIO

DVD SETUP

ANGLE

RETURN

ZOOM

•

Specify the number to search in direct search.

Press to fast forward/backward.

Switches the fast forward/backward speed each

time you press this key.

SUBTITLE

2ABC

ꢀꢁ

ꢅ

AUD

•

DVD

ENTER

•

Press

to slow forward/backward.

5JKL

4GHI

Direct search

MNO

R.VOL

Switches the slow playback speed each time you

press this key.

7PQRS 8^TUV9WXYZ

ꢁ

CLEAR

DIRECT

ATT

DVD Top Menu

Returns to the DVD top menu.

Pressing this key switches the features that can be

searched directly.

DISP

SRC

V.SEL

MODE FNC/PBC

TOP MENU

DVD SETUP

ANGLE

RETURN

ZOOM

DVD-VIDEO

AUDIO

SUBTITLE

ꢀꢁ

ꢅ

Title number

Chapter number

Play time

DVD Menu

Displays the DVD menu.

Turns the playback control on or off while playing

VCD.

Item number*

Cancel

DISP

SRC

V.SEL

* You may not be able to use this function with some discs

or scenes.

MODE FNC/PBC

TOP MENU

DVD SETUP

ANGLE

RETURN

ZOOM

AUDIO

SUBTITLE

ꢀꢁ

ꢅ

DVD-VR

SUBTITLE

Switches the subtitle language.

Title number

Chapter number

Play time

DISP

SRC

V.SEL

MODE FNC/PBC

Cancel

TOP MENU

DVD SETUP

ANGLE

RETURN

ZOOM

AUDIO

SUBTITLE

ꢀꢁ

ꢅ

KVT-526DVD/KVT-556DVD

ZOOM

Direct search

MNO

R.VOL

Switches the zoom ratio each time you press this

7PQRS 8^TUV9WXYZ

ꢁ

key.

CLEAR

DIRECT

ATT

DISP

SRC

V.SEL

MODE FNC/PBC

TOP MENU

DVD SETUP

ANGLE

RETURN

ZOOM

Pressing this key switches the features that can be

searched directly.

AUDIO

SUBTITLE

ꢀꢁ

ꢅ

Music Disc

Picture Angle

Switches the picture angle each time you press this

key.

Track number

Play time

Cancel

DISP

SRC

V.SEL

MODE FNC/PBC

TOP MENU

DVD SETUP

ANGLE

RETURN

ZOOM

AUDIO

SUBTITLE

Audio files in DVD/CD disc

ꢀꢁ

ꢅ

Folder number

File number

Cancel

AUDIO

Switches Voice Language.

Switches the voice language each time you press

this key.

Once you have switched to the direct search

feature, specify the search number from the

numeric keypad, and then press [38] key.

DISP

SRC

V.SEL

MODE FNC/PBC

TOP MENU

DVD SETUP

ANGLE

RETURN

ZOOM

AUDIO

SUBTITLE

Numeric keypad

ꢃ

ꢀꢁ

ꢅ

2ZONE

2^ABC3DEF

ꢄ

ꢀ

R.VOL

ꢁ

4GHI 5JKL 6MNO

7PQRS 8^TUV9WXYZ

CLEAR

DIRECT

ATT

Music Disc/Audio file/Video file/ Picture

file (AUD mode)

•

Specify the number to search in direct search.

Folder search

Selects the folder to be played.

AM−

OPEN

VOL

ꢂ

ꢃ

2ZONE

2^ABC3DEF

ꢄ

Track search and file search

Selects the track or file to be played.

AM−

OPEN

VOL

ꢂ

ꢃ

2ZONE

2^ABC3DEF

ꢄ

Play/Pause

Pauses the track.

Press again to resume playing.

TOP MENU

DVD SETUP

RETURN

AUDIO

SUBTITLE

ANGLE

ZOOM

ꢀꢁ

ꢅ

AUD

•

DVD

ENTER

English

Remote Controller

TV (TV mode)

Radio (AUD mode)

Switching Band/Video

Band switching

It switches between the station of the TV band to

Switches to bands received by the unit.

receive and video input.

AM−

OPEN

VOL

ꢂ

ꢃ

AM−

OPEN

VOL

2ZONE

ꢂ

ꢃ

2^ABC3DEF

ꢄ

2ZONE

2^ABC3DEF

ꢄ

Station selection

Channel Selection

Switches to broadcast stations received by the unit.

The TV channel to receive is selected.

AM−

OPEN

VOL

AM−

OPEN

ꢂ

ꢃ

VOL

ꢂ

ꢃ

2ZONE

2^ABC3DEF

ꢄ

2ZONE

2^ABC3DEF

ꢄ

Direct tuning

After pressing this key, use the keypad to specify

Numeric keypad

the broadcast station you wish to receive.

ꢃ

2ZONE

2^ABC3DEF

ꢄ

ꢀ

R.VOL

ꢁ

4GHI 5JKL 6MNO

R.VOL

7PQRS 8^TUV9WXYZ

ꢁ

7PQRS 8^TUV9WXYZ

CLEAR

DIRECT

ATT

CLEAR

DIRECT

ATT

•

The number of the memorized station is

Example: 92.1MHz (FM)

selected. (

–

6MNO

)

9WXYZ

2ABC

Press the direct tuning key first, then specify the

channel of the station to receive.

Example: 810kHz (AM)

8TUV

Numeric keypad

ꢃ

2ZONE

2^ABC3DEF

ꢄ

ꢀ

R.VOL

ꢁ

4GHI 5JKL 6MNO

7PQRS 8^TUV9WXYZ

CLEAR

DIRECT

ATT

•

To use preset tuning, press the number of a

programmed broadcast station. (

–

6MNO

)

Press the direct tuning key first, then specify the

frequency of the station to receive.

KVT-526DVD/KVT-556DVD

DVD Language Codes

Code

Language

Afar

Abkhazian

Afrikaans

Amharic

Arabic

Assamese

Aymara

Azerbaijani

Bashkir

Byelorussian

Bulgarian

Bihari

Bislama

Bengali, Bangla

Tibetan

Breton

Catalan

Corsican

Czech

Code

Language

Icelandic

Italian

Japanese

Javanese

Georgian

Kazakh

Greenlandic

Cambodian

Kannada

Korean

Kashmiri

Kurdish

Kirghiz

Latin

Luxembourgish

Lingala

Laotian

Lithuanian

Latvian, Lettish

Malagasy

Maori

Macedonian

Malayalam

Mongolian

Moldavian

Marathi

Malay

Maltese

Burmese

Nauru

Nepali

Dutch

Norwegian

Occitan

(Afan) Oromo

Oriya

Punjabi

Code

Language

Singhalese

Slovak

Slovenian

Samoan

Shona

Somali

Albanian

Serbian

Siswati

Sesotho

Sundanese

Swedish

Swahili

Tamil

Telugu

Tajik

Thai

Tigrinya

Turkmen

Tagalog

Setswana

Tongan

Turkish

Tsonga

Tatar

Welsh

Danish

German

Bhutani

Greek

English

Esperanto

Spanish

Estonian

Basque

Persian

Finnish

Fiji

Faroese

French

Frisian

Irish

Scots Gaelic

Galician

Guarani

Gujarati

Hausa

Twi

Ukrainian

Urdu

Uzbek

Vietnamese

Volapuk

Wolof

Xhosa

Yoruba

Chinese

Zulu

gli

Polish

Pashto, Pushto

Portuguese

Quechua

Rhaeto-Romance

Kirundi

Hebrew

Hindi

Romanian

Russian

Kinyarwanda

Sanskrit

Sindhi

Sangho

Croatian

Hungarian

Armenian

Interlingua

Interlingue

Inupiak

Indonesian

Serbo-Croatian

English

Help?

Troubleshooting

Some functions of this unit may be disabled by

some settings made on this unit.

What might seem to be a malfunction in your unit

may just be the result of slight misoperation or

miswiring. Before calling service, first check the

following table for possible problems.

• Cannot set up the subwoofer.

• Cannot set up subwoofer phase.

• No output from the subwoofer.

• Cannot set up the low pass filter.

• Cannot set up the high pass filter.

General

The Touch Sensor Tone doesn’t sound.

✔

The preout jack is being used.

Subwoofer is not set to On.

☞ <Audio Setup> (page 58)

☞

The Touch Sensor Tone can’t be output from

the preout jack.

Preout is set to "Rear".

☞ <System Setup> (page 62)

Tuner source

The Dual zone function is enabled.

Radio reception is poor.

☞ <Zone Control> (page 82)

✔

The car antenna is not extended.

Cannot set up the subwoofer phase.

Subwoofer is not set to On.

☞ <Audio Setup> (page 58)

☞

Pull the antenna out all the way.

✔

The antenna control wire is not connected.

Connect the wire correctly, referring to the

section on <INSTALLATION MANUAL>.

☞

Low pass filter is set to Through.

☞ <Crossover Network Setup> (page 59)

Disc source

• Cannot select the output destination of the

subsource in the Dual zone.

• Cannot adjust the volume of the rear

speakers.

The specified disc does not play, but another

one plays instead.

✔

The specified disc is quite dirty.

The Dual zone function is disabled.

☞ <Zone Control> (page 82)

☞

Clean the disc.

✔

The disc is severely scratched.

Try another disc instead.

☞

Cannot play audio files.

"CD Read" of <System Setup> (page 62) is set

to "2".

Audio file source

The sound skips when an Audio file is being

played.

Cannot Folder select.

The Scan play or Random play function is

enabled.

✔

The media is scratched or dirty.

☞

Clean the media, referring to the CD

cleaning of the section on <Handling discs>

(page 4).

Cannot perform Repeat play.

The PBC function is enabled.

✔

The recording condition is bad.

☞

Record the media again or use another

media.

• Cannot set up the equalizer.

• Cannot set up the crossover network.

The Dual zone function is enabled.

☞ <Zone Control> (page 82)

Cannot watch the source selected as AV-OUT

in the rear monitor.

A source control screen is displayed in front.

☞ <AV lnterface Setup> (page 64)

"AV-OUT Graphic Output" of <AV Interface

Setup> is set to "Black".

KVT-526DVD/KVT-556DVD

Help?

Error

Error 07–67:

When the unit fails to operate correctly, the cause

of the failure appears on the display.

The unit is not operating correctly due to some reason

or other.

➡ Push the unit's Reset button. If the "Error 07−67"

message does not disappear, see your nearest

Kenwood dealer.

Protect :

Protective circuit has been activated because a speaker

cord has shorted or it has come in contact with the car

chassis.

➡ Wire or insulate the speaker cord as appropriate

and then push the Reset button (page 4).

No Device (USB device)/Disconnected (iPod):

The USB device/iPod is selected as a source although

no USB device/iPod is connected.

Hot Error :

➡ Change the source to any source other than

USB/iPod. Connect an USB device/iPod, and

change the source to USB/iPod again.

When the internal temperature of this unit rises to 60°C

or more, the protection circuit is activated and you

may not be able to operate the unit. At such times this

message will appear.

No Music:

The connected USB device contains no playable audio

file.

Media was played that doesn’t have data recorded that

the unit can play.

➡ Use the unit again after reducing the

temperature inside the vehicle.

Hold Error :

Activation of the protective circuit when the

temperature inside the disc changer is higher than 60

degrees Celsius stops the disc changer from operating.

At such times this message will appear.

USB Device Error!!:

The connected USB device is rated a current capacity

higher than the allowable limit.

➡ Check the USB device.

Some trouble may have occurred to the connected

USB device.

➡ Use when the temperature at the site where the

disc changer has been fitted has dropped.

Mecha Error :

The disc player is malfunctioning.

➡ Change the source to any source other than USB.

Remove the USB device.

➡ Eject the disc and try inserting it again. Contact

the Kenwood dealer if this indicator continues

blinking or the disc cannot be ejected.

Authorization Error:

Connection to the iPod has failed.

➡ Remove the iPod and then reconnect it.

The unit does not support the iPod.

➡ See <iPod/iPhone models that can be connected

to this unit> (page 5).

Disc Error :

An unplayable disc is inserted.

Read Error :

Update your iPod:

Disc is quite dirty.

The iPod's software is an older version which the unit

can not support.

➡ Confirm that the software for the iPod is the

latest version. See <iPod/iPhone models that can

be connected to this unit> (page 5).

➡ Clean the disc, referring tot he section on

<Handling discs> (page 4).

Disc is upside down.

➡ Load the disc with the labeled side up.

Region code Error :

No Navigation:

This unit does not support the connected navigation

unit.

➡ The latest information on the connectable

navigation unit can be obtained from http://

www.kenwood.com/cs/ce.

The disc you wanted to play has a region code that

cannot be played with this unit.

Parental level Error:

The disc you wanted to play has a higher level than the

parental level you set.

No navigation unit is connected.

➡ Connect a supported navigation unit.

English

Specifications

Monitor section

USB interface section

Picture Size

USB Standard

: 6.96 inches (diagonal) wide

: USB 2.0 (High speed)

154.1 mm (W) x 86.6 mm (H)

File System

Display System

: FAT 16/ 32

: Transparent TN LCD panel

Maximum Power Supply Current

Drive System

: 500 mA

: TFT active matrix system

D/A Converter

Number of Pixels

: 24 Bit

: 336,960 (480H x 234V x RGB)

Audio Decoder

Effective Pixels

: MP3/ WMA/ WAV (Linear PCM)/ AAC

: 99.99 %

Video Decoder (Max: 2Mbps)

Pixel Arrangement

: MPEG1/ MPEG2/ DivX

: RGB striped arrangement

Back Lighting

: Cold Cathode Fluorescent Tube

FM tuner section

Frequency Range (50 kHz)

: 87.5 MHz – 108.0 MHz

DVD player section

Usable Sensitivity (S/N : 26 dB)

D/A Converter

: 0.7 μV/ 75 Ω

: 24 bit

Quieting Sensitivity (S/N : 46 dB)

Audio Decoder

: 1.6 μV/ 75 Ω

: Linear PCM/ Dolby Digital/ dts/ MP3/ WMA/

WAV (Linear PCM) / AAC

Frequency Response ( 3.0 dB)

: 30 Hz – 15 kHz

Video Decoder

: MPEG1/ MPEG2/ DivX

S/N Ratio (dB)

: 65 dB (MONO)

Wow & Flutter

: Below Measurable Limit

Selectivity ( 400 kHz)

: ≤ 80 dB

Frequency Response

Stereo Separation

Sampling frequency 96 kHz : 20 – 44,000 Hz

Sampling frequency 48 kHz : 20 – 22,000 Hz

Sampling frequency 44.1 kHz : 20 – 20,000 Hz

: 35 dB (1 kHz)

Total Harmonic Distortion

: 0.010 % (1 kHz)

LW tuner section

Frequency Range (9 kHz)

: 153 kHz – 279 kHz

S/N Ratio (dB)

: 98 dB (DVD-Video 96 kHz)

Usable Sensitivity

: 45 μV

Dynamic Range

: 98 dB (DVD-Video 96 kHz)

Disc Format

: DVD-Video/ VIDEO-CD/ CD-DA

MW tuner section

Sampling Frequency

: 44.1/ 48/ 96 kHz

Frequency Range (9 kHz)

: 531 kHz – 1611 kHz

Quantifying Bit Number

: 16/ 20/ 24 bit

Usable Sensitivity

: 25 μV

KVT-526DVD/KVT-556DVD

Video section

General

Color System of External Video Input

Operating Voltage

: NTSC/PAL

: 14.4 V (11 – 16 V allowable)

External Video Input Level (RCA jacks)

Maximum Current Consumption

: 1 Vp-p/ 75 Ω

: 15 A

External Audio Max Input Level (RCA jacks)

Installation Dimensions (W × H × D)

: 2 V/ 25 kΩ

: 182 × 53 × 160 mm

Video Output Level (RCA jacks)

Operational Temperature Range

: 1 Vp-p/ 75 Ω

: -10 °C – +60 °C

Audio Output Level (RCA jacks)

Storage Temperature Range

: 1.2 V/ 10 kΩ

: -20 °C – +85 °C

Analog RGB input

Weight

: 0.7 Vp-p/ 75 Ω

: 2.3 kg

Audio section

Maximum Power (Front & Rear)

: 50 W x 4

Full Bandwidth Power (Front & Rear)

: 30 W x 4 (PWR DIN 45324, +B=14.4V)

Preout Level (V)

: 2 V/ 10 kΩ

Preout Impedance

: ≤ 600 Ω

Speaker Impedance

: 4 – 8 Ω

Tone Action

Bass : 100 Hz 8 dB

Middle : 1 kHz 8 dB

Treble : 10 kHz 8 dB

Specifications subject to change without notice.

Although the effective pixels for the liquid crystal panel is

given as 99.99% or more, 0.01% of pixels may not light or

may light incorrectly.

English

Information on Disposal of Old Electrical and Electronic Equipment and Batteries

(applicable for EU countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed

as household waste.

Old electrical and electronic equipment and batteries should be recycled at a facility

capable of handling these items and their waste byproducts.

Contact your local authority for details in locating a recycle facility nearest to you.

Proper recycling and waste disposal will help conserve resources whilst preventing

detrimental effects on our health and the environment.

Notice: The sign "Pb" below the symbol for batteries indicates that this battery contains

lead.

This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional

importer of a vehicle into an EU Member State.

The marking of products using lasers (Except for some areas)

The label is attached to the chassis/case and says that the component

uses laser beams that have been classified as Class 1. It means that the

unit is utilizing laser beams that are of a weaker class. There is no danger

of hazardous radiation outside the unit.

CLASS 1

LASER PRODUCT

The "AAC" logo is a trademark of Dolby Laboratories.

iPod is a trademark of Apple Inc., registered in the U.S. and other countries.

iPhone is a trademark of Apple Inc.

“Made for iPod”means that an electronic accessory has been designed to connect specifically to iPod and has been certified

by the developer to meet Apple performance standards.

“Works with iPhone”means that an electronic accessory has been designed to connect specifically to iPhone and has been

certified by the developer to meet Apple performance standards.

Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

is a trademark of DVD Format/Logo Licensing Corporation registered in the U.S., Japan and other countries.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property

rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other

limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and

worldwide patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol and DTS 2.0 Channel are

ABOUT DIVX VIDEO:

DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX

video. Visit www.divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND:

This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content. To

generate the registration code, locate the DivX VOD section in <DivX Setup> (page 62). Go to vod.divx.com

with this code to complete the registration process and learn more about DivX VOD.

DivX® is a registered trademark of DivX, Inc., and is under license.

This symbol mark indicates that

Kenwood manufactured this product

so as to decrease harmful inﬂuence on

the environment.

Minicom Advanced Systems KVM EXTENDER USB 5UM30167 User Manual
Maxtor DiamondMax 6L100M0 User Manual
HTC Imagio User Manual
DeLonghi DC87T Series User Manual
Curtis RCD302 User Manual
Clarion RDC655Tz User Manual
Chauvet LEGEND 550 User Manual
Bloomfield 2074FR User Manual
Agilent Technologies System DC N5700 User Manual
2nd Ave BF 40 User Manual