Kenwood DPX701U User Manual

DUAL DIN SIZED CD RECEIVER  
DPX701U  
DPX501U  
INSTRUCTION MANUAL  
© B64-3402-00/01 (EW, E2W)  
Contents  
Safety precautions  
Notes  
4
5
CD/USB device/Audio file/External  
disc control features  
Playing CD & Audio file  
Playing USB device  
Playing External Disc  
Fast Forwarding and Reversing  
Track/File Search  
Disc Search/Folder Search  
Direct Track/File Search  
Direct Disc Search  
Track/File/Disc/Folder Repeat  
Scan Play  
Random Play  
Magazine Random Play  
All Random Play  
Select mode  
File Select mode  
27  
About CDs  
7
About AAC, MP3 and WMA  
About USB device  
General features  
Power  
Selecting the Source  
Volume  
Attenuator  
System Q  
Audio Control  
Adjusting the detail of Audio Control  
Audio Setup  
8
10  
11  
Folder Select 1 mode  
Folder Select 2 mode  
Switching the Play mode  
Letter Seek  
Speaker Setting  
Subwoofer Output  
TEL Mute  
Text/Title Scroll  
Switching Display  
Display Type Selection  
Graphic part Display Switching  
Wallpaper selecting  
Text Selection for Display  
Text Display Switching  
Font Color Select  
Tuner features  
Tuning  
Direct Access Tuning  
Station Preset Memory  
Auto Memory Entry  
Preset Tuning  
22  
24  
RDS features  
Traffic Information  
Radio Text Scroll  
PTY (Program Type)  
Program Type preset  
Changing Language for PTY Function  
|
2
English  
Menu system  
Menu System  
Security Code  
34  
Basic Operations of remote control 46  
Accessories/ Installation Procedure 48  
Touch Sensor Tone  
Manual Clock Adjustment  
Date Adjustment  
Date Mode  
Synchronize Clock  
Indirect Lighting  
Display Illumination Control  
Dimmer  
Switching preout  
Built-in Amp Setting  
Dual Zone System Setting  
B.M.S. (Bass Management System)  
B.M.S. Frequency Offset  
AMP Control  
Connecting Wires to Terminals  
Installing the Escutcheon  
Installation  
49  
51  
52  
53  
54  
58  
Removing the Unit  
Troubleshooting Guide  
Specifications  
News Bulletin with Timeout Setting  
Local Seek  
Tuning Mode  
AF (Alternative Frequency)  
Restricting RDS Region (Region Restrict  
Function)  
Auto TP Seek  
Monaural Reception  
External Display Control  
Disc Naming (DNPS)  
Auxiliary Input Display Setting  
Selecting Russian Characters  
Text Scroll  
Built-in Auxiliary input Setting  
Power OFF Timer  
CD Read Setting  
Voice Index  
ACDrive firmware version display  
Unique ID display  
Audio Preset Memory  
Audio Preset Recall  
Demonstration mode Setting  
The "AAC" logo is trademark of Dolby  
Laboratories.  
|
English  
3
Safety precautions  
Do Not Load 3-in. CDs in the CD slot  
If you try to load a 3 in. CD with its adapter into the  
unit, the adapter might separate from the CD and  
damage the unit.  
2WARNING  
To prevent injury or fire, take the  
following precautions:  
• To prevent a short circuit, never put or leave any  
metallic objects (such as coins or metal tools)  
inside the unit.  
• Do not watch or fix your eyes on the unit’s display  
when you are driving for any extended period.  
• Mounting and wiring this product requires  
skills and experience. For safety’s sake, leave the  
mounting and wiring work to professionals.  
About CD players/disc changers  
connected to this unit  
Kenwood disc changers/ CD players released in  
1998 or later can be connected to this unit.  
Refer to the catalog or consult your Kenwood  
dealer for connectable models of disc changers/  
CD players.  
Note that any Kenwood disc changers/ CD players  
released in 1997 or earlier and disc changers made  
by other makers cannot be connected to this unit.  
Connecting unsupported disc changers/CD players  
to this unit may result in damage.  
Set the "O-N" Switch to the "N" position for the  
applicable Kenwood disc changers/ CD players.  
The functions you can use and the information  
that can be displayed may differ depending on the  
models being connected.  
2CAUTION  
To prevent damage to the machine, take  
the following precautions:  
• Make sure to ground the unit to a negative 12V  
DC power supply.  
• Do not install the unit in a spot exposed to direct  
sunlight or excessive heat or humidity. Also avoid  
places with too much dust or the possibility of  
water splashing.  
• When replacing a fuse, only use a new fuse with  
the prescribed rating. Using a fuse with the wrong  
rating may cause your unit to malfunction.  
You can damage both your unit and the CD changer if  
you connect them incorrectly.  
• Do not use your own screws. Use only the screws  
provided. If you use the wrong screws, you could  
damage the unit.  
Lens Fogging  
When you turn on the car heater in cold weather,  
dew or condensation may form on the lens in the  
CD player of the unit. Called lens fogging, this  
condensation on the lens may not allow CDs to  
play. In such a situation, remove the disc and wait  
for the condensation to evaporate. If the unit still  
does not operate normally after a while, consult  
your Kenwood dealer.  
|
4
English  
Notes  
• No USB device comes with this unit. You need to  
purchase a commercially available USB device. For  
the types of available USB devices, refer to <About  
USB device> (page 10).  
• If you experience problems during installation,  
consult your Kenwood dealer.  
Cleaning the Unit  
If the faceplate of this unit is stained, wipe it with a  
dry soft cloth such as a silicon cloth.  
If the faceplate is stained badly, wipe the stain off  
with a cloth moistened with neutral cleaner, then  
wipe it again with a clean soft dry cloth.  
• When you purchase optional accessories, check  
with your Kenwood dealer to make sure that they  
work with your model and in your area.  
• Characters that conform to ISO 8859-1 can be  
displayed. (DPX701U only)  
Applying spray cleaner directly to the unit may affect its  
mechanical parts. Wiping the faceplate with a hard cloth  
or using a volatile liquid such as thinner or alcohol may  
scratch the surface or erase characters.  
• Characters that conform to ISO 8859-5 or ISO  
8859-1 can be displayed. Refer to <Selecting  
Russian Characters> (page 41). (Russian sales area  
of DPX701U)  
• The characters which can be displayed by this  
unit are A-Z 0-9 @ " ‘ ` % & * + – = , . / \ < > [ ] ( ) : ;  
^ - { } | ~ . (DPX501U only)  
Before using this unit for the first time  
This unit is initially set on the Demonstration mode.  
When using this unit for the first time, cancel the  
<Demonstration mode Setting> (page 44).  
• The RDS feature won’t work where the service is  
not supported by any broadcasting station.  
• There are places in this manual where lit  
About DAB Tuner control  
Refer to A group on the Instruction manual of DAB  
Tuner KTC-9090DAB (optional accessory) for the  
control method of DAB Tuner function.  
However, the following control methods of the  
function for this unit may be different from the  
Instruction manual; therefore, refer to the following  
supplemental instruction.  
indicators are described; however, the only time  
an indicator will light is in the following settings.  
When Indicator is selected as mentioned in <Text  
Display Switching> (page 18). (DPX701U only)  
• The illustrations of the display and the panel  
appearing in this manual are examples used to  
explain more clearly how the controls are used.  
Therefore, what appears on the display in the  
illustrations may differ from what appears on  
the display on the actual equipment, and some  
of the illustrations on the display may represent  
something impossible in actual operation.  
<Auto Ensemble Memory Entry>  
1. Select the preset band for Auto Ensemble  
Memory Entry.  
2. Press the [AME] button for at least 2 seconds.  
Open Auto Ensemble Memory Entry.  
After storing in the memory finishes, the  
number of the pre-set buttons and the  
ensemble label are displayed.  
<Searching by programme type and language>  
and <Languages to be displayed> in  
<Programme Type (PTY) Function>  
At the operation to press [DISP] button, use [TI]  
button instead.  
How to reset your unit  
• If the unit fails to operate properly, press the Reset  
button. The unit returns to factory settings when  
the Reset button is pressed.  
• Remove the USB device before pressing the Reset  
button. Pressing the Reset button with the USB  
device installed can damage the data contained  
in the USB device. For how to remove the USB  
device, refer to <Playing USB device> (page 28).  
• Press the Reset button if the disc auto changer  
fails to operate correctly. Normal operation should  
be restored.  
Reset button  
|
English  
5
Notes  
This Product is not installed by the manufacturer  
of a vehicle on the production line, nor by the  
professional importer of a vehicle into an EU  
Member State.  
About "Media Manager" of PC application  
attached to DPX701U/DPX501U  
• "Media Manager" is recorded in the CD-ROM  
attached to this unit.  
• Refer to the attached installation manual for the  
installation method of "Media Manager".  
• Refer to the user’s manual in the installation  
CD-ROM and Help of "Media Manager" for the  
operation method of "Media Manager".  
• The unit can play CD/ USB device (hereafter called  
"ACDrive media") created by "Media Manager".  
• Refer to the following site for updated information  
of "Media Manager".  
Information on Disposal of Old Electrical  
and Electronic Equipment (applicable for  
EU countries that have adopted separate  
waste collection systems)  
Products with the symbol (crossed-out  
wheeled bin) cannot be disposed as  
household waste.  
Old electrical and electronic equipment  
should be recycled at a facility capable  
of handling these items and their  
waste byproducts. Contact your local  
authority for details in locating a  
recycle facility nearest to you. Proper  
recycling and waste disposal will help  
conserve resources whilst preventing  
detrimental effects on our health and the  
environment.  
• Contact Kenwood for the function and operation  
of the "Media Manager".  
• "Media Manager" is a product of PhatNoise.  
The marking of products using lasers  
(Except for some areas)  
The label is attached to the chassis/case and says  
that the component uses laser beams that have  
been classified as Class 1. This means that the unit  
is utilizing laser beams that are of a weaker class.  
There is no danger of hazardous radiation outside  
the unit.  
|
6
English  
About CDs  
Handling CDs  
• Do not touch the recording surface of the CD.  
Removing CDs  
When removing CDs from this unit, pull them out  
horizontally.  
CDs that cannot be used  
• CDs that are not round cannot be used.  
• CD-R and CD-RW are easier to damage than a  
normal music CD. Use a CD-R or a CD-RW after  
reading the caution items on the package etc.  
• Do not stick tape etc. on the CD, or use a CD with  
tape stuck on it.  
• CDs with coloring on the recording surface or CDs  
that are dirty cannot be used.  
• This unit can only play the CDs with  
When using a new CD  
If the CD center hole or outside rim has burrs,  
use the CD only after removing the burrs with a  
ballpoint pen, etc.  
Burrs  
Burrs  
CD accessories  
Do not use disc type accessories.  
CD cleaning  
Clean from the center of the disc and move  
outward.  
|
English  
7
About AAC, MP3 and WMA  
The playable AAC/MP3/WMA file (hereafter called  
Audio file) and the media format has the following  
limitation. The Audio file, which is not conforming  
to the specification, may not play normally, or the  
file and folder names may not display correctly.  
Playable CD-R/RW format  
• ISO 9660 Level 1/2  
• Joliet  
• Romeo  
• Long file name.  
Playable Audio file  
Playable file format of USB device  
• For the formats supported by USB devices, refer to  
AAC, MP3, WMA  
Attach the correct extension for the Audio file (AAC:  
".M4A", MP3: ".MP3", WMA: ".WMA").  
Do not attach the extensions to files other than the  
Audio file. If the extension is attached, the file, which is  
not the Audio file, will play and outputs a loud noise,  
causing damage to the speaker.  
The files with copy protection cannot be played.  
Audio files cannot be played depending on the encoding  
software setting, USB device type, and/or recording  
conditions.  
The unit may not be compatible with upgrade  
of compression format standard and additional  
specifications.  
The maximum number of characters for  
display (CD-R/RW)  
File/Folder name: 128 characters  
MP3 ID3 Tag/ WMA Contents property:  
30 characters  
AAC song information: 60 characters  
File/Folder name is the number of the characters  
including the extensions.  
This unit can display the following versions of MP3 ID3  
tag: version 1.0/ 1.1/ 2.2/ 2.3  
For details on the formats used for USB devices  
and restrictions, refer to http://www.kenwood.  
mediamanager.jp/.  
AAC ID3 Tag cannot be displayed.  
Limitation of structure for the file and the  
folder (CD-R/RW)  
• Maximum number of directory levels: 8  
• Maximum number of folders: 100  
Playable AAC file  
".m4a" file encoded by AAC-LC format.  
for the details.  
• Maximum number of files per folder: 4096  
Playable MP3 file  
About partition of the USB device  
• While using the USB device, virtual folders are  
created to control the partition in the USB device.  
These folders appear in the first level (root)  
directory as "#:". "#" is an alphabet to identify each  
partition.  
• Even when the USB device does not have  
partition, "A:" folder is created, and audio files are  
controlled inside this folder.  
• MPEG 1/2 Audio Layer 3 file  
• Transfer bit rate: 8-320 kbps  
• Sampling frequency: 16, 22.05, 24, 32, 44.1, 48 kHz  
Playable WMA file  
• The file in accordance with Windows Media Audio  
(Except for the file for Windows Media Player 9 or  
after which applies the new functions)  
• Transfer bit rate: 48-192 kbps  
• Sampling frequency: 32, 44.1, 48 kHz  
Playable Storage media  
• CD-ROM, CD-R, CD-RW  
• USB device  
CD-RW discs which are quick formatted by the writing  
software cannot be used.  
When recording to the maximum CD-R/RW media  
capacity at once, the writing software is set to "Disc at  
once".  
For details on the available USB devices, refer to <About  
USB device> (page 10).  
|
8
English  
Playing order of the Audio file  
• The Audio file plays in the order which is written  
by CD writing software. You may be able to set  
the playing order by writing the play sequence  
numbers such as "01" to "99" at the beginning of  
the file name.  
• Audio files are played in the order the files are  
written. You can specify the order of playback by  
numbering files in a folder and writing them by  
folder. (USB device)  
Example  
^
¡
:
Folder  
F
CD  
(1)  
: A
Audio file  
¡!  
2
3
¡"  
¡#  
4
¡$  
5
¡%  
¡P  
• Playing order  
Playing order after ¡! play.  
¡", ¡#, ¡$, ¡%...  
• File search  
Forward file search during ¡" play.  
Push the Control knob towards [¢] ¡#  
• Folder search  
Forward folder search during ¡" play.  
Push the Control knob towards [FM] 4, 5...  
• File select  
When the selection is set to file ¡%.  
Push the Control knob towards [¢]  
¡%...P, %...  
• Folder select 1  
When the selection is set to directory 4, and you  
want to skip to the folder 2 at the same level.  
Push the Control knob towards [4] 2  
When the selection is set to directory 3, moves  
the level up by folder select.  
Push the Control knob towards [AM] 2  
• Folder select 2  
When the selection is set to directory 1, and you  
want to skip to the folder 4.  
Push the Control knob towards [¢] 3, 4...  
|
English  
9
About USB device  
Notes on Use of the USB Device  
This unit can play audio files stored in the flash  
memory and digital audio player that have a USB  
port (these devices are referred to as USB devices in  
this document).  
The following restrictions are placed on the types  
and usage of available USB devices:  
Install the USB device in the place where it will not  
prevent you from driving your vehicle properly.  
Do not leave the USB device in the vehicle for a long  
time. It can deform or damage due to direct sunlight,  
high temperature, etc.  
Take backups of the audio files used with this unit.  
The files can be erased depending on the operating  
conditions of the USB device.  
Available USB Devices  
• USB devices belonging to the USB mass storage  
class.  
We shall have no compensation for any damage arising  
out of erasure of the stored data.  
Leave the cap on when not using an USB device.  
• USB devices whose maximum current  
consumption is 500 mA or less.  
For the supported formats and USB device types,  
About USB Device Operation  
• USB device operation is the same as audio  
file operation unless otherwise some notice is  
indicated.  
• USB source is recognized as CD source on the  
connected unit.  
USB Mass Storage Class:  
USB devices that the PC can recognize as an external  
storage without using any special driver or application  
software.  
Contact the sales agent as to whether your USB device  
conforms to the USB mass storage class specs.  
Using an unsupported USB device can result in abnormal  
playback or display of the audio file.  
Even if you use the USB device conforming to the above  
specs, audio files cannot be played normally depending  
on the type or condition of the USB device.  
About the Connection of the USB Device  
• Do not directly connect the USB device to the  
USB connector on the panel. Connect it using a  
cable  
• When connecting the USB drive, usage of the  
supplied USB cable is recommended.  
Normal playback is not guaranteed when a cable  
other than the USB compatible cable is used.  
Connecting a cable whose total length is longer  
than 5 m can result in abnormal playback.  
You cannot connect a USB device via a USB hub.  
|
10  
English  
accessory)  
ly mode)  
"AUX EXT"  
"STANDBY"  
ically turns full power OFF after 20  
Standby mode in order to save the  
power OFF can be set in <Power  
42).  
e  
nob clockwise.  
Select
Press the [
me  
Source required  
Tuner  
USB device  
nob counterclockwise.  
CD  
External disc (Optional accessory)  
Auxiliary input  
|
English  
11  
General features  
Attenuator  
Audio Control  
Turning the volume down quickly.  
1 Select the source to adjust  
Press the [SRC] button.  
Press the [ATT] button.  
Each time you press the button, the Attenuator  
turns ON and OFF.  
When the Attenuator is ON, "ATT" is displayed.  
2 Enter Audio Control mode  
Press the [VOL] knob.  
3 Select the Basic Audio item to adjust  
Press the [VOL] knob.  
Each time you press the knob, the item to be  
adjusted alternates between the items shown in  
the table below.  
System Q  
4 Adjust the Basic Audio item  
Turn the [VOL] knob.  
Selecting the best sound setting preset for  
different types of music.  
Adjustment Item Display  
Range  
Rear Volume *1  
"Rear Volume"/ 0 — 35  
"R-VOL"  
1 Select the source to set  
Press the [SRC] button.  
Subwoofer level*2,3,4 "Sub-W Level"/ –15 — +15  
"SW L"  
2 Select the Sound type  
Press the [Q] button.  
When you press the button once, the current  
sound setting is displayed.  
Each time you press the button, the sound  
setting alternates.  
Bass level*5  
"Bass Level"/ –8 — +8  
"BAS L"  
"Middle Level"/ –8 — +8  
"MID L"  
"Treble Level"/  
–8 — +8  
"TRE L"  
Middle level*5  
Treble level*5  
Balance  
Fader*4  
"Balance"/ "BAL" Left 15 — Right 15  
"Fader"/ "FAD" Rear 15 — Front 15  
Sound setting  
User memory  
Rock  
Display  
"USER"  
"ROCK"  
"POPS"  
Exit Audio Control mode (Volume control mode)  
Pops  
*1 You can control this item when "2 ZONE"/ "2ZON" of  
<Audio Setup> (page 14) is set to "ON".  
*2 You can control this item when <Switching preout>  
(page 37) is set to "SWPRE SW". (DPX501U only)  
*3 You can control this item when <Subwoofer  
Output> (page 15) is set to "SW ON".  
*4 You can control this item when "2 ZONE"/ "2ZON" of  
<Audio Setup> (page 14) is set to "OFF".  
*5 You can adjust these items in detail. Refer to  
<Adjusting the detail of Audio Control>(Page13).  
*5 Source tone memory: Puts the set up value in the  
memory per source. (Detail Audio item is included)  
Easy  
Top 40  
Jazz  
Natural  
"EASY"  
"TOP 40"  
"JAZZ"  
"NATURAL"  
User memory: The values set on the <Audio Control>  
(page 12).  
Change each setting value with the <Speaker  
Setting> (page 14).  
First, select the speaker type with the Speaker setting.  
5 Exit Audio Control mode  
Press any button.  
Press a button other than the [VOL] knob and  
[ATT] button.  
|
12  
English  
Adjusting the detail of Audio  
Control  
When you set the Bass Extend to ON, low frequency  
response is extended by 20%.  
You can exit the Audio Control mode at anytime  
by pressing any button except for [VOL] and [ATT]  
buttons.  
Among the Basic Audio items, you can adjust the  
Bass level, Middle level, and Treble level in detail.  
1 Select the Basic Audio item  
Select the desired item to be set in detail from  
followings;  
• Bass level  
• Middle level  
• Treble level  
For how to select Basic Audio items, see <Audio  
Control> (page 12).  
2 Enter Detail adjustment mode of Audio  
Control  
Press the [VOL] knob for at least 1 second.  
3 Select the Detail Audio item to adjust  
Press the [VOL] knob.  
Each time you press the knob, the item to be  
adjusted alternates between the items shown in  
the table below.  
4 Adjust the Detail Audio item  
Turn the [VOL] knob.  
Bass level  
Adjustment Item  
Bass Center Frequency "Bass FRQ"/ 40/50/60/70/80/100/  
"BAS F" 120/150 Hz  
Display  
Range  
Bass Q Factor  
"Bass QFactor"/1.00/1.25/1.50/2.00  
"BAS Q"  
Bass Extend  
"Bass EXT"/ OFF/ON  
"B EX"  
Middle level  
Adjustment Item  
Display  
Range  
Middle Center Frequency "Middle FRQ"/ 0.5/1.0/1.5/2.0 kHz  
"MID F"  
Middle Q Factor  
"Middle  
QFactor"/  
"MID Q"  
1.00/2.00  
Treble level  
Adjustment Item  
Display  
Range  
Treble Center Frequency "Treble FRQ"/ 10.0/12.5/15.0/17.5 kHz  
"TRE"  
5 Exit the Detail Audio Control mode  
Press the [VOL] knob for at least 1 second.  
|
English  
13  
General features  
- Adjust the volume of Rear channel by <Audio  
Control> (page 12).  
- The Audio Control has no effect on sub source.  
You can use the Dual Zone System with the internal  
auxiliary input.  
Audio Setup  
Setting the Sound system, such as Cross over  
Network.  
1 Select the source to adjust  
5 Exit Audio Setup mode  
Press the [VOL] knob for at least 1 second.  
Press the [SRC] button.  
2 Enter Audio Setup mode  
Press the [VOL] knob for at least 1 second.  
3 Select the Audio Setup item to adjust  
Press the [VOL] knob.  
Each time you press the knob, the item to be  
adjusted alternates between the items shown in  
the table below.  
Speaker Setting  
Fine-tuning so that the System Q value is optimal  
when setting the speaker type.  
4 Setup the Audio item  
1 Enter Standby  
Turn the [VOL] knob.  
Press the [SRC] button.  
Select the "STANDBY" display.  
Adjustment Item Display  
Front High Pass Filter*2 "HPF-F Fc"/ Through/40/60/80/100/120/  
"HPF" 150/180/220 Hz  
Rear High Pass Filter*2 "HPF-R Fc"/ Through/40/60/80/100/120/  
Range  
2 Enter Speaker Setting mode  
Press the [VOL] knob.  
"SP SEL"/ "SP" is displayed.  
"HPR"  
"LPF-SW"/  
"LPF"  
150/180/220 Hz  
50/60/80/100/120/  
Through Hz  
3 Select the Speaker type  
Turn the [VOL] knob.  
Each time you turn the knob, the setting  
alternates between the settings shown in the  
table below.  
Low Pass Filter*1,2  
Subwoofer Phase*1,2,3 "SW Phase"/ Reverse (180°)/ Normal (0°)  
"PHAS"  
Volume offset  
"Vol-Offset"/ –8 —  
"V-OFF"  
0
Speaker type  
OFF  
For 5 & 4 in. speaker  
For 6 & 6x9 in. speaker  
For the OEM speaker  
Display  
"OFF"/ "SP OFF"  
"5/4 inch"/ "SP 5/4"  
"6x9/6 inch"/ "SP 6*9/6"  
"O.E.M."/ "SP OEM"  
Loudness  
"LOUD"  
OFF/ON  
OFF/ON  
Dual Zone System  
"2 ZONE"/  
"2ZON"  
Volume offset: Sets each source’s volume as a  
difference from the basic volume.  
Loudness: Compensates for low and high tones  
during low volume.  
*1 You can control this item when <Switching preout>  
(page 37) is set to "SWPRE SW". (DPX501U only)  
*1 You can control this item when <Subwoofer  
Output> (page 15) is set to "SW ON".  
*2 You can control this item when "2 ZONE"/ "2ZON" of  
<Audio Setup> (page 14) is set to "OFF".  
*3 You can control this item when Low Pass Filter is not  
set to Through.  
4 Exit Speaker Setting mode  
Press the [VOL] knob.  
Dual Zone System  
Main source and sub source (Auxiliary input) output  
Front channel and Rear channel separately.  
- Set up the channel of sub source by <Dual Zone  
System Setting> (page 37).  
- Select Main source by [SRC] button.  
- Adjust the volume of Front channel by [VOL] knob.  
|
14  
English  
Subwoofer Output  
Turning the Subwoofer output ON or OFF.  
Push the Control knob toward [AM] for at  
least 2 seconds.  
Each time you push the knob, Subwoofer output  
switches ON and OFF.  
When it is ON, "SW ON" is displayed.  
You can control this function when <Switching  
preout> (page 37) is set to "SWPRE SW". (DPX501U  
only)  
You can control this function when "2 ZONE" of  
<Audio Setup> (page 14) is set to "OFF".  
TEL Mute  
The audio system automatically mutes when a  
call comes in.  
When a call comes in  
"CALL" is displayed.  
The audio system pauses.  
Listening to the audio during a call  
Press the [SRC] button.  
The "CALL" display disappears and the audio  
system comes back ON.  
When the call ends  
Hang up the phone.  
The "CALL" display disappears and the audio  
system comes back ON.  
To use the TEL Mute feature, you need to hook up  
the MUTE wire to your telephone using a commercial  
telephone accessory. Refer to <Connecting Wires to  
Terminals> (page 49).  
|
English  
15  
General features  
Function of the DPX501U  
Function of the DPX701U  
Switching Display  
Display Type Selection  
Changing the information displayed.  
Changing the display mode.  
Press the [DISP] button.  
Press the [DISP] button.  
Each time the button is pressed, the display  
switches as shown below.  
Each time you press the button, the display  
mode alternates between the display modes  
shown in the table below.  
In Tuner source  
Display Mode Display  
Information  
Program Service name or Frequency "FREQ/PS"  
(FM)  
Display  
Display Type A  
1
Radio text, Program Service name or "R-TEXT"  
Frequency (FM)  
Display Type B  
1
2
Frequency (MW, LW)  
Clock  
"FREQ"  
"CLOCK"  
In CD & External disc source  
Display Type C  
3
3
3
4
5
6
Information  
Disc title  
Track title  
Track number & Play time  
Clock  
Display  
"D-TITLE"*  
"T-TITLE"*  
"P-TIME"  
"CLOCK"  
Display Type D  
4
5
6
7
In Audio file source  
Information  
Display  
"TITLE"*  
"ALBUM"*  
"FOLDER "  
"FILE "  
1 Graphic display part  
2 Text display part  
Song title & Artist name  
Album name & Artist name  
Folder name  
File name  
Track number & Play time  
Clock  
3 Text icon display part  
4 Upper text display part  
5 Middle text display part  
6 Lower text display part  
7 Source icon display part  
"P-TIME"  
"CLOCK"  
In Standby/ Auxiliary input source  
The indicator is displayed when the display type is set  
to Display Type C or Display Type D.  
To change the information by the Display Type, refer  
to the page on the following table for the methods to  
alternate by the Display Type.  
Information  
Source name  
Clock  
Display  
"SRC NAME"  
"CLOCK"  
Display Type  
Graphic 1  
Text 2  
A
B
C
19  
20  
20  
D
19  
20  
20  
17  
17  
18  
* If the contents of the information cannot be  
displayed, Play time or Frequency is displayed.  
Track number at Audio file displays the last 3 digits  
when it exceeds 1000 songs.  
When you select the clock display, the display setting  
of each source will be changed to the clock display.  
Upper 4  
Middle 5  
Lower 6  
Switching between graphic display part and  
text display part when in Display Type B  
mode.  
Press the [DISP] button.  
|
16  
English  
Function of the DPX701U  
Display Type A/ Display Type B  
Function of the DPX701U  
Display Type A/ Display Type B  
Graphic part Display Switching  
Wallpaper selecting  
Changing the graphic Display.  
Selecting a wallpaper to display when Display  
Type is set to Display Type A/ Display Type B.  
1 Select the display Type  
Press the [DISP] button.  
Select the Display Type A/ Display Type B.  
1 Select the wallpaper display  
Refer to <Graphic part Display Switching> (page  
17).  
2 Enter graphic display select mode  
Press the [DISP] button for at least 1 second.  
Display Type A : Press the [DISP] button for at  
least 1 second.  
Display Type B : After pressing the [DISP]  
button for more than 1 second to text  
selection mode. Press the [DISP] button  
again.  
2 Select the wallpaper  
Display the wallpapers one after another  
Press the Control knob.  
Each time you press the button, the Wallpaper  
scan is turned ON and OFF.  
When scan is ON, "SCAN" is displayed.  
When scan is ON, each wallpaper is displayed  
every several seconds.  
3 Select the graphic part display  
Push the Control knob towards [4] or  
[¢].  
Each time you push the knob, the graphic display  
alternates between the displays shown in the  
table below.  
Select wallpaper manually  
1 Turn the wallpaper scan OFF.  
Press the Control knob.  
Each time you press the button, the Wallpaper  
scan is turned ON and OFF.  
Graphic display  
Movie 1  
Movie 2  
2 Select the wallpaper.  
Push the Control knob towards [FM] or [AM].  
Each time you push the knob, the Wallpaper  
changes.  
Wallpaper  
3 Exit Display Control mode  
Press the [DISP] button.  
4 Exit graphic display select mode  
Press the [DISP] button.  
The setting of this function is available while Display  
Type A/ Display Type B is selected for the Display  
mode.  
|
English  
17  
General features  
Function of the DPX701U  
Display Type B  
4 Exit text select mode  
Press the [DISP] button for at least 1 second.  
Text Selection for Display  
Selecting the text display.  
* If the contents of the information cannot be  
displayed, Play time or Frequency is displayed.  
When LX-AMP is connected, the item setup by the  
Display mode of LX-AMP is displayed.  
Track number at Audio file displays the last 3 digits  
when the track number exceeds 1000 songs.  
1 Select the display Type  
Press the [DISP] button.  
Select the Display Type B.  
2 Enter text select mode  
Press the [DISP] button for at least 1 second.  
3 Select the text  
Push the Control knob towards [4] or  
[¢].  
In Tuner source  
Function of the DPX701U  
Display Type C/ Display Type D  
Information  
Program Service name (FM)  
Display  
"Frequency/PS"*  
Text Display Switching  
Radio text or Program Service name (FM) "Radio Text"*  
Changing the text display.  
Frequency (MW, LW)  
Clock  
Date  
"Frequency"  
"Clock"  
1 Select the display Type  
Press the [DISP] button.  
"Date"  
Select the Display Type C/Display Type D.  
In CD & External disc source  
2 Enter text select mode  
Information  
Disc title  
Display  
"Disc Title"*  
Press the [DISP] button for at least 1 second.  
3 Select the text display part  
Push the Control knob towards [FM] or [AM].  
The cursor ( ) moves to the selected text display  
part.  
Track title  
"Track Title"*  
"P-Time"  
"DNPS"  
Track number & Play time  
Disc name  
Clock  
"Clock"  
Date  
"Date"  
Select the text  
Push the Control knob towards [4] or  
In Audio file source  
[¢].  
Refer to the table described later for setting  
items.  
Information  
Song title & Artist name  
Album name & Artist name  
Folder name  
File name  
Play time & File number  
Clock  
Display  
"Title/Artist"*  
"Album/Artist"*  
"Folder Name"  
"File Name"  
"P-Time"  
4 Exit text select mode  
Press the [DISP] button.  
Same information cannot be displayed in Upper text  
display part, Middle text display part and Lower text  
display part. However, the blank display is able to have  
multiple selections.  
"Clock"  
"Date"  
Date  
In Standby/ Auxiliary input source  
Track number at Audio file displays the last 3 digits  
when the track number exceeds 1000 songs.  
When LX-AMP is connected, the item setup by the  
Display mode of LX-AMP is displayed.  
Information  
Source name  
Clock  
Display  
"Source Name"  
"Clock"  
Date  
"Date"  
|
18  
English  
The text display in the Upper text display  
part  
In Tuner source  
Information  
Display  
Program Service name (FM)  
Radio text or Program Service name (FM)  
Frequency (MW, LW)  
Clock  
Date  
"Frequency/PS"*  
"Radio Text"*  
"Frequency"  
"Clock"  
"Date"  
In CD & External disc source  
Information  
Disc title  
Track title  
Track number & Play time  
Disc name  
Clock  
Display  
"Disc Title"*  
"Track Title"*  
"P-Time"  
"DNPS"  
"Clock"  
Date  
"Date"  
In Audio file source  
Information  
Song title & Artist name  
Album name & Artist name  
Folder name  
File name  
Play time & File number  
Clock  
Display  
"Title/Artist"*  
"Album/Artist"*  
"Folder Name"  
"File Name"  
"P-Time"  
"Clock"  
Date  
"Date"  
In Standby/ Auxiliary input source  
Information  
Source name  
Clock  
Display  
"Source Name"  
"Clock"  
Date  
"Date"  
* If the contents of the information cannot be  
displayed, Play time or Frequency is displayed.  
|
English  
19  
General features  
The text display in the Middle text display  
part  
The text display in the Lower text display  
part  
In Tuner source  
In Tuner source  
Information  
Clock  
Date  
Display  
"Clock"  
"Date"  
Information  
Indicator  
Clock  
Display  
"Status"  
"Clock"  
Blank  
"Blank"  
Date  
"Date"  
Radio text (FM)  
"Radio Text"*  
Blank  
"Blank"  
Radio text (FM)  
"Radio Text"*  
In CD & External disc source  
In CD & External disc source  
Information  
Clock  
Date  
Display  
"Clock"  
"Date"  
Information  
Indicator  
Clock  
Display  
"Status"  
"Clock"  
Blank  
"Blank"  
Disc title  
Track title  
Disc name  
"Disc Title"*  
"Track Title"*  
"DNPS"  
Date  
Blank  
Disc title  
Track title  
Disc name  
"Date"  
"Blank"  
"Disc Title"*  
"Track Title"*  
"DNPS"  
In Audio file source  
Information  
Clock  
Display  
"Clock"  
In Audio file source  
Date  
Blank  
"Date"  
"Blank"  
Information  
Indicator  
Display  
"Status"  
Song title & Artist name  
Album name & Artist name  
Folder name  
File name  
"Title/Artist"*  
"Album/Artist"*  
"Folder Name"  
"File Name"  
Clock  
Date  
Blank  
"Clock"  
"Date"  
"Blank"  
"Title/Artist"*  
"Album/Artist"*  
"Folder Name"  
"File Name"  
Song title & Artist name  
Album name & Artist name  
Folder name  
File name  
In Standby/ Auxiliary input source  
Information  
Clock  
Date  
Display  
"Clock"  
"Date"  
"Blank"  
In Standby/ Auxiliary input source  
Blank  
Information  
Indicator  
Clock  
Date  
Blank  
Display  
"Status"  
"Clock"  
"Date"  
* If the contents of the information cannot be  
displayed, Kenwood Logo is displayed.  
"Blank"  
* If the contents of the information cannot be  
displayed, indicator is displayed.  
|
20  
English  
Function of the DPX701U  
Display Type B/ Display Type C/ Display Type D  
Font Color Select  
Selecting the display font color.  
1 Enter text select mode  
Display type B : Refer to <Text Selection for  
Display> (page 18).  
Display type C/D : Refer to <Text Display  
Switching> (page 18).  
2 Switch from text selection to Font Color  
selection  
Press the Control knob.  
3 Select the text display part  
Select the row (Display Type C/ Display Type  
D only)  
Push the Control knob towards [FM] or [AM].  
The cursor ( ) moves to the selected text display  
part.  
Select the Font Color  
Push the Control knob towards [4] or  
[¢].  
4 Exit Font Color select mode  
Press the Control knob.  
When you selected the Display Type B display, select  
an easy viewable font color.  
The "Status" item of Display type C/D can be set;  
however, the actual display color does not change.  
|
English  
21  
Accessory of the DPX701U  
Function of remote control  
Tuning  
Selecting the station.  
Direct Access Tuning  
1 Select tuner source  
Press the [SRC] button.  
Select the "TUNER" display.  
Entering the frequency and tuning.  
1 Select the band  
Press the [FM] or [AM] button.  
2 Select the band  
2 Enter Direct Access Tuning mode  
Press the [DIRECT] button on the remote  
control.  
Push the Control knob towards [FM] or [AM].  
Each time you push the knob toward [FM], it  
switches between the FM1, FM2, and FM3 bands.  
"– – – –" is displayed.  
3 Tune up or down band  
Push the Control knob towards [4] or  
[¢].  
3 Enter the frequency  
Press the number buttons on the remote  
control.  
Example:  
During reception of stereo stations the "ST" indicator  
is ON.  
Desired frequency  
92.1 MHz (FM)  
Press button  
[0], [9], [2], [1]  
[0], [8], [1], [0]  
810 kHz (AM)  
Cancelling Direct Access Tuning  
Press the [DIRECT] button on the remote  
control.  
|
22  
English  
Station Preset Memory  
Preset Tuning  
Putting a station in the memory.  
Recalling the stations in the memory.  
1 Select the band  
Push the Control knob towards [FM] or [AM].  
1 Select the band  
Push the Control knob towards [FM] or [AM].  
2 Select the frequency to put in the memory  
Push the Control knob towards [4] or  
[¢].  
2 Recall the station  
Press the desired [1] — [6] button.  
3 Put the frequency in the memory  
Press the desired [1] — [6] button for at least  
2 seconds.  
The preset number display blinks 1 time.  
On each band, 1 station can be put in the  
memory on each [1] — [6] button.  
Auto Memory Entry  
Putting stations with good reception in the  
memory automatically.  
1 Select the band for Auto Memory Entry  
Push the Control knob towards [FM] or [AM].  
2 Open Auto Memory Entry  
Press the [AME] button for at least 2 seconds.  
When 6 stations that can be received are put in  
the memory, Auto Memory Entry closes.  
When the <AF (Alternative Frequency)> (page 39) is  
ON, only RDS stations are put in the memory.  
When Auto Memory Entry is done in the FM2 band,  
the RDS stations preset in the FM1 band are not put in  
the memory.  
Likewise, when Auto Memory Entry is done in the FM3  
band, RDS stations preset in FM1 or FM2 are not put  
in the memory.  
|
English  
23  
RDS features  
Control knob  
TI  
1 - 6  
Program Service name  
Band display  
Radio text  
DPX701U  
DPX501U  
RDS indicator  
PTY indicator  
TI indicator  
Radio text  
Receiving other traffic information stations  
Push the Control knob towards [4] or  
[¢].  
Traffic Information  
Changing to traffic information automatically  
when a traffic bulletin starts even when you are  
not listening to the radio.  
Traffic information can be switched when it is on the  
Tuner Source. However, you cannot switch the Traffic  
information during reception of the Traffic bulletin  
switched from the source other than the Tuner.  
Press the [TI] button.  
Each time you press the button, the Traffic  
information function turns ON and OFF.  
When traffic information is ON, "TI" indicator is  
ON. (DPX501U only)  
When a traffic information station is not being  
received the "TI" indicator blinks.  
When a traffic bulletin starts, "Traffic INFO"/  
"TRAFFIC" is displayed and the audio changes to  
traffic information.  
Radio Text Scroll  
Scrolling the displayed radio text.  
During reception of an AM station when the Traffic  
Information function is turned ON, the frequency  
changes to an FM station.  
During reception of traffic information the adjusted  
volume is automatically remembered, and the next  
time the audio changes to traffic information, the  
volume automatically becomes the remembered  
volume.  
Push the Control knob toward [FM] for at  
least 2 seconds.  
When the <Display Illumination Control> (page 37) is  
set to OFF, the display may black out while scrolling.  
|
24  
English  
PTY (Program Type)  
30.  
31.  
Folk Music  
Documentary  
"Folk Music"  
"Documentary"  
"FOLK M"  
"DOCUMENT"  
Selecting the Program Type and searching for a  
station.  
Speech and Music include the Program type shown  
below.  
Music: No.12 17, 26 30  
1 Enter PTY mode  
Press the Control knob.  
"PTY Select" is displayed. (DPX701U only)  
During PTY mode the "PTY" indicator is ON.  
(DPX501U only)  
Speech: No.3 11, 18 25, 31  
You can put the Program Type in the [1] — [6] button  
memory and for quick recall. Refer to the <Program  
Type preset> (page 25).  
You can change the display language. Refer to  
<Changing Language for PTY Function> (page 26).  
This function cannot be used during a traffic bulletin  
or AM reception.  
3 Search for the selected Program Type  
station  
Push the Control knob towards [4] or  
[¢].  
When you want to search for other stations, push  
[4] or [¢] of the Control knob again.  
2 Select the Program Type  
Push the Control knob towards [FM] or [AM].  
Each time you push the knob, the Program Type  
alternates between the program types shown in  
the table below.  
No. Program Type  
Display  
DPX701U  
"All Speech"  
"All Music"  
"News"  
"Current Affairs" "AFFAIRS"  
"Information"  
"Sport"  
DPX501U  
"SPEECH"  
"MUSIC"  
"NEWS"  
When the selected Program Type is not found, "NO  
PTY" is displayed. Select another Program Type.  
1.  
2.  
3.  
4.  
5.  
6.  
Speech  
Music  
News  
Current Affairs  
Information  
Sport  
4 Exit PTY mode  
Press the Control knob.  
"INFO"  
"SPORT"  
7.  
8.  
9.  
Education  
Drama  
Culture  
"Education"  
"Drama"  
"Cultures"  
"Science"  
"EDUCATE"  
"DRAMA"  
"CULTURE"  
"SCIENCE"  
Program Type preset  
10.  
11.  
12.  
13.  
14.  
15.  
16.  
17.  
18.  
19.  
20.  
21.  
22.  
23.  
24.  
25.  
26.  
27.  
28.  
29.  
Science  
Varied  
"Varied Speech" "VARIED"  
Putting the Program Type in the Preset button  
memory and quick recall.  
Pop Music  
Rock Music  
Easy Listening Music  
Light Classical  
Serious Classical  
Other Music  
Weather  
"Pop Music"  
"Rock Music"  
"POP M"  
"ROCK M"  
Presetting the Program Type  
"Easy Listening M" "EASY M"  
"Light Classic M" "LIGHT M"  
"Serious Classics" "CLASSICS"  
1 Select the Program Type to preset  
Refer to <PTY (Program Type)> (page 25).  
"Other Music"  
"Weather & Metr" "WEATHER"  
"Finance" "FINANCE"  
"Children's Prog" "CHILDREN"  
"OTHER M"  
2 Preset the Program Type  
Press the desired [1] [6] button for at least  
2 seconds.  
Finance  
Children’s programs  
Social Affairs  
Religion  
Phone In  
Travel  
"Social Affairs"  
"Religion"  
"Phone In"  
"SOCIAL"  
"RELIGION"  
"PHONE IN"  
Recalling the preset Program Type  
1 Enter PTY mode  
Refer to <PTY (Program Type)> (page 25).  
"Travel & Touring" "TRAVEL"  
"Leisure & Hobby" "LEISURE"  
Leisure  
2 Recall the Program Type  
Press the desired [1] [6] button.  
Jazz Music  
Country Music  
National Music  
Oldies Music  
"Jazz Music"  
"JAZZ"  
"Country Music" "COUNTRY"  
"National Music" "NATION M"  
"Oldies Music"  
"OLDIES"  
|
English  
25  
RDS features  
Changing Language for PTY  
Function  
Selecting the Program Type display language.  
1 Enter PTY mode  
Refer to <PTY (Program Type)> (page 25).  
2 Enter Changing Language mode  
Press the [TI] button.  
3 Select the language  
Push the Control knob towards [FM] or [AM].  
Each time you push the knob, the language  
alternates between the languages shown in the  
table below.  
DPX701U  
Language  
English  
Spanish  
Display  
"English"  
"Spanish"  
"French"  
French  
Dutch  
"Dutch"  
Norwegian  
Portuguese  
Swedish  
German  
"Norwegian"  
"Portuguese"  
"Swedish"  
"German"  
DPX501U  
Language  
English  
French  
Swedish  
German  
Display  
"ENGLISH"  
"FRENCH"  
"SWEDISH"  
"GERMAN"  
4 Exit Changing Language mode  
Press the [TI] button.  
|
26  
English  
CD/USB device/Audio file/External disc control features  
Control knob  
SRC  
S.MODE SCAN RDM/ REP F.SEL M.RDM  
A.RDM/3  
Track number  
Play time  
Track number  
Play time  
DPX701U  
DPX501U  
Disc number  
IN indicator  
IN indicator  
Play mode  
Playing CD & Audio file  
When a disc is inserted  
Press the [SRC] button.  
Select the "Compact Disc"/ "CD" display.  
When a CD is inserted, the "IN" indicator is ON.  
Pause and play  
Press the Control knob.  
Each time you press the knob, the audio pauses  
or plays.  
Eject the CD  
Press the [0] button.  
You can cancel the announcement when selecting  
the folder by <Voice Index> (page 43) during the play  
of the ACDrive media.  
|
English  
27  
CD/USB device/Audio file/External disc control features  
Playing USB device  
Playing External Disc  
Playing discs set in the optional accessory disc  
player connected to this unit.  
Playing USB device  
1 Select a source other than the USB device.  
Press the [SRC] button.  
2 Select USB source  
Press the [SRC] button.  
Select the "USB" display.  
Select the display for the disc player you want.  
Display examples:  
Display  
"CD Changer"/ "CD CH"  
"MD Changer"/ "MD CH"  
Disc player  
CD changer  
MD changer  
Refer to <About AAC, MP3 and WMA> (page 8) for the  
Audio file you can play.  
For the types of available USB devices and how to  
connect USB devices, refer to <About USB device>  
Pause and play  
68 139.5 w051 143.3 c P1r8 selected as a source  
(page 10).  
can damage the data stored in the USB device.  
After you stopped playing a file contained in the USB  
device, you can restart playing the file from the point  
where you stopped its playback.  
Even after removing the USB device, you can restart  
playing the file from the point where you stopped  
its playback as long as the files contained in the USB  
device are all the same.  
Be sure to insert the USB device connector as far as it  
will go.  
You can play the disc (ACDrive media) made by Media  
Manager by the same operation.  
You can cancel the announcement when selecting  
the folder by <Voice Index> (page 43) during the the  
ACDrive media.  
Pause and play  
Press the Control knob.  
Each time you press the knob, the audio pauses  
or plays.  
Removing the USB Device  
1 Select a source other than the USB device  
Press the [SRC] button.  
2 Remove the USB device.  
Removing the USB device with it selected as a source  
can damage the data stored in the USB device.  
You can remove the USB device safely with the unit  
power turned off.  
|
28  
English  
Accessory of the DPX701U  
Track/File Search  
Function of disc changers with remote control  
Searching for a song on the disc or in the Audio  
file folder.  
Direct Disc Search  
Doing Disc Search by entering the disc number.  
Push the Control knob towards [4] or  
[¢].  
1 Enter the disc number  
Press the number buttons on the remote  
control.  
2 Do Disc Search  
Function of disc changer/ Audio file  
Press the [+] or [] button.  
Disc Search/Folder Search  
Cancelling Direct Disc Search  
Selecting the disc set in the Disc changer or the  
folder recorded on the Audio file media.  
Press the [38] button.  
Push the Control knob towards [FM] or [AM].  
Input "0" to select disc 10.  
Accessory of the DPX701U  
Function of remote control  
Track/File/Disc/Folder Repeat  
Replaying the song, disc in the Disc changer or  
Audio file folder you are listening to.  
Direct Track/File Search  
Doing Track/File Search by entering the track/file  
number.  
Press the [REP] button.  
Each time you press the button, the Repeat Play  
alternates between the modes shown in the  
tables below.  
1 Enter the track/file number  
Press the number buttons on the remote  
control.  
In CD & External disc source  
Repeat play  
Track Repeat  
Disc Repeat (In Disc Changer)  
OFF  
Display  
You can select Direct File Search up to 999.  
"Track Repeat ON"/ "TRAC REP"  
"Disc Repeat ON"/ "DISC REP"  
"Repeat OFF"/ "REP OFF"  
2 Do Track/File Search  
Press the [4] or [¢] button.  
Cancelling Direct Track/File Search  
Press the [38] button.  
In Audio file source  
Repeat play  
File Repeat  
Folder Repeat  
OFF  
Display  
"File Repeat ON"/ "FILE REP"  
"Folder Repeat ON"/ "FOLD REP"  
"Repeat OFF"/ "REP OFF"  
|
English  
29  
CD/USB device/Audio file/External disc control features  
Function of Audio file  
Scan Play  
All Random Play  
Playing the first part of each song on the disc  
or Audio file folder you are listening to and  
searching for the song you want to hear.  
Playing randomly from all of the Audio files  
recorded in the media.  
Press the [A.RDM] button for at least 1  
second.  
When the random mode is ON, "All Random ON"/  
"ALL RDM" is displayed.  
1 Start Scan Play  
Press the [SCAN] button.  
"Scan ON"/ "Track Scan ON"/ "File Scan ON"/  
"SCAN ON"/ "TRAC SCN"/ "FILE SCN" is displayed.  
Cancelling the All Random Play  
Press the [A.RDM] button.  
2 Release it when the song you want to listen  
to is played  
Press the [SCAN] button.  
When you push the Control knob toward [¢], the  
next random song starts.  
Random Play  
Playing all the songs on the disc in random order.  
Press the [RDM] button.  
Each time you press the button, Random Play  
turns ON or OFF.  
When the Random mode is ON, "Random ON"/  
"Disc Random ON"/ "Folder RDM ON"/ "DISC  
RDM"/ "FOLD RDM" is displayed.  
Function of Audio file  
Select mode  
Quickly selecting the file or folder you want to  
hear.  
1 Select the Select mode  
Press the [FSEL] button.  
When you push the Control knob toward [¢], the  
next random song starts.  
Display  
Select mode  
"FILE SELECT"/  
Refer to <File Select mode> (page 31).  
"FILE SEL"*1  
"FOLDER SELECT1"/ Refer to <Folder Select 1 mode> (page 32).  
"FOLDER SELECT"/  
"FLD SEL1"/ "FLD SEL"  
Function of disc changer  
"FOLDER SELECT2"/ Refer to <Folder Select 2 mode> (page 32).  
"FLD SEL2" *2  
Magazine Random Play  
Exit the Select mode  
Play the songs on all the discs in the disc changer  
in random order.  
The Select mode does not function when <All  
Random Play> (page 30) is ON.  
Press the [M.RDM] button.  
Each time you press the button, the Magazine  
Random Play turns ON or OFF.  
When the Magazine Random mode is ON,  
"Magazine RDM ON"/ "MGZN RDM" is displayed.  
*1 You cannot operate this function when <Random  
Play> (page 30) is set to "ON".  
*2 You cannot operate this function when <Switching  
the Play mode> (page 33) is set to other than  
"Folder Mode"/ "FOLDER" while playing ACDrive  
media.  
When you push the Control knob toward [¢], the  
next random song starts.  
2 Select the file/ folder  
Refer to the explanation of the procedure  
performed in each select mode.  
|
30  
English  
Scrolling the file/ folder name display  
Push the Control knob toward [FM] for at  
least 2 seconds.  
You can cancel the announcement when selecting  
the folder by <Voice Index> (page 43) during the play  
of the ACDrive media.  
In the File Select mode, the <Voice Index> (page 43)  
announcement is not made.  
Function of Audio file  
File Select mode  
You can select an audio file in the folder currently  
being played by file name.  
1 Enter File Select mode  
Press the [F.SEL] button.  
Select the "FILE SELECT"/ "FILE SEL" display.  
Refer to <Select mode> (page 30).  
File name display  
Displays the current file name.  
File number display  
Displays the number in the folder belonging to  
the currently selected file.  
Displays the current file name.  
|
English  
31  
CD/USB device/Audio file/External disc control features  
Function of Audio file  
The Folder Select mode releases, and the Audio  
file in the folder being displayed plays.  
Folder Select 1 mode  
Select the target folder by tracing the hierarchical  
levels of folders. This is convenient when  
managing audio files by folder.  
Function of Audio file  
1 Enter Folder Select 1 mode  
Press the [F.SEL] button.  
Select the "FOLDER SELECT1"/ "FLD SEL1"/  
"FOLDER SELECT"/ "FLD SEL" display.  
Refer to <Select mode> (page 30).  
Folder name display  
Folder Select 2 mode  
Select the target folder within the folders  
containing audio files. The folder which contains  
playable audio files is only displayed.  
1 Enter Folder Select 2 mode  
Press the [F.SEL] button.  
Select the "FOLDER SELECT2"/ "FLD SEL2"  
display.  
Displays the current folder name.  
Refer to <Select mode> (page 30).  
Folder name display  
Displays the current folder name.  
Folder number display  
Displays the number in the folder belonging to  
the currently selected folder.  
Displays the current folder name.  
Folder number display  
Displays the number in the folder belonging to  
the currently selected folder.  
Displays the current folder name.  
.
2 Select the folder level*  
Push the Control knob towards [FM] or [AM].  
With the [FM] button, you move 1 level down  
and with the [AM] button, 1 level up.  
Selecting a folder in the same level  
Push the Control knob towards [4] or  
[¢].  
With the [4] of the Control knob, you move  
to the previous folder, and with the [¢] of the  
Control knob, to the next folder.  
2 Select the folder  
Push the Control knob towards [4] or  
[¢].  
Each time you push the knob, the folders  
containing audio files are displayed one after  
another.  
Returning to the top level*  
Press the [3] button.  
Check the name of upper level folder  
Push the Control knob towards [FM] or [AM].  
With the [FM] button, the folder name in the  
upper level is displayed.  
With the [AM] button, the folder name in the  
lower level is displayed.  
* You cannot operate this function when <Switching  
the Play mode> (page 33) is set to other than "Folder  
Mode" while playing ACDrive media.  
3 Decide the folder to play  
Press the Control knob.  
"^"/ " " is displayed while the upper level  
folder is displayed.  
|
32  
English  
3 Decide the folder to play  
Press the Control knob.  
The Folder Select mode releases, and the Audio  
file in the folder being displayed plays.  
This operation does not function when <All Random  
Play> (page 30) is ON.  
This function is available only when the Play mode is  
set Genre, Artist, or Album.  
Cancelling the Letter Seek  
Press the [S.MODE] button.  
Function of ACDrive media  
2 Start the Letter Seek  
Push the Control knob towards [4] or  
[¢].  
The initial of Genre name, Artist name, or Album  
name is displayed and announced in order.  
Switching the Play mode  
Arrange the playing orders of the songs by  
categories.  
Press the [S.MODE] button.  
Each time you press the button, the Play mode  
alternates between the modes shown in the  
table below.  
The announcement of the initial can be canceled by  
<Voice Index> (page 43).  
When you push the Control knob to the reverse [4]  
or [¢] during Letter Seek, the initial is displayed and  
announced in the reversed order.  
The Play mode indicator is ON. (DPX501U only)  
Play mode  
Category which is to be arranged  
"PlayList Mode"/ "PLAYLIST" Play list order.  
Once Letter Seek starts, it cannot be cancelled.  
"Genre Mode"/ "GENRE"  
"Artist Mode"/ "ARTIST"  
"Album Mode"/ "ALBUM" By album.  
By genre.  
By artist.  
3 Select the song to play  
Press the Control knob when the initial of  
the song you are searching is displayed and  
announced.  
"Folder Mode"/ "FOLDER" By the folder recorded in media  
The selected initial group plays.  
The category information of each song is the data  
registered in Media Manager when ACDrive media is  
being generated.  
Letter seek can be performed for letters of the  
alphabet (A-Z).  
You can cancel the announcement made when the  
mode is changed by <Voice Index> (page 43).  
You can select the advancement of the Play mode  
information by [AM] and [FM] knob.  
Text/Title Scroll  
Scrolling the displayed CD text, Audio file text, or  
MD title.  
Function of ACDrive media  
Push the Control knob toward [FM] for at  
least 2 seconds.  
Letter Seek  
You can search for the song, you want to play, by  
selecting the initial of Genre name, Artist name,  
or Album name.  
When the <Display Illumination Control> (page 37) is  
set to OFF, the display may black out while scrolling.  
1 Enter the Letter Seek mode  
Press the [S.MODE] button for at least 1  
second.  
|
English  
33  
Menu system  
Control knob  
MENU  
SRC  
Menu display  
DPX701U  
DPX501U  
Menu display  
You can continue by returning to step 2 and  
setting other items.  
Menu System  
Setting beep sound during operation, etc.  
functions.  
The Menu system basic operation method is  
4 Exit Menu mode  
Press the [MENU] button.  
explained here. The reference for the Menu items  
and their setting content is after this operation  
explanation.  
When other items those applicable to the basic  
operation method above are displayed, their setting  
content chart is entered. (Normally the setting listed at  
the top of the chart is the original setting.)  
Also, the explanation for items that are not applicable  
(<Manual Clock Adjustment> etc.) are entered step  
by step.  
Three menu items appear on the display. The menu  
item displayed at the center is the one you can adjust.  
(DPX701U only)  
1 Enter Menu mode  
Press the [MENU] button for at least 1 second.  
"MENU" is displayed.  
2 Select the menu item  
Push the Control knob towards [FM] or [AM].  
Example: When you want to set the beep sound  
select the "Beep"/ "BEEP" display.  
3 Set the menu item  
Push the Control knob towards [4] or  
[¢].  
Example: When you select "Beep"/ "BEEP", each  
time you push the knob it alternates  
between "Beep : ON"/ "BEEP ON" or  
"Beep : OFF"/ "BEEP OFF". Select 1 of  
them as the setting.  
|
34  
English  
In Standby mode  
Resetting the Security Code function when  
the audio unit is first used after removed  
from the battery power source or the Reset  
button is pressed  
Security Code  
Activating the Security Code disables the usage  
of audio unit by someone else. Once the Security  
Code is activated, the entry of authorized Security  
Code is required to turn on the audio unit when  
it is removed from the vehicle. Indication of this  
Security Code activation prevents your precious  
audio unit from stealing.  
1 Turn the power ON.  
2 Do the step 4 through 7 step operation, and  
reenter the security code.  
"Approved"/ "APPROVED" is displayed.  
Now, you can use the unit.  
If an incorrect code is entered, "Waiting"/ "WAITING" is  
displayed, and the input prohibition periods shown in  
the table below is generated.  
After the input prohibition time lapses, "Security"/  
"CODE" is displayed, and you can reenter the code.  
Set the Security Code when the <Demonstration mode  
Setting> (page 44) is set to OFF.  
When you activate the Security Code function, it cannot  
be released.  
Note, your Security Code is the 4 digit number entered in  
your "Car Audio Passport" in this package.  
Number of times the  
Input prohibited time  
incorrect code was input  
1 Enter Standby  
1
2
3
4
5 minutes  
1 hour  
Press the [SRC] button.  
Select the "STANDBY" display.  
2 Enter Menu mode  
24 hours  
Press the [MENU] button for at least 1 second.  
When "MENU" is displayed, "Security Set"/ "CODE  
SET" is displayed.  
3 Enter Security Code mode  
Press the Control knob for at least 1 second.  
When "Enter"/ "ENTER" is displayed, "Security  
Set"/ "CODE" is also displayed.  
In Standby mode  
Touch Sensor Tone  
4 Select the digits to enter  
Push the Control knob towards [4] or  
[¢].  
Setting the operation check sound (beep sound)  
ON/OFF.  
Display  
Setting  
5 Select the Security Code numbers  
Push the Control knob towards [FM] or [AM].  
"Beep : ON"/ "BEEP ON"  
"Beep : OFF"/ "BEEP OFF"  
Beep is heard.  
Beep canceled.  
6 Repeat steps 4 and 5, and complete the  
Security Code.  
7 Confirm the Security Code  
Press the Control knob for at least 3 seconds.  
When "Re-Enter"/ "RE-ENTER" is displayed,  
"Security Set"/ "CODE" is also displayed.  
8 Do the step 4 through 7 step operation, and  
reenter the security code.  
"Approved"/ "APPROVED" is displayed.  
The Security Code function activates.  
If you enter a Code different from your Security Code,  
you have to start over from step 4.  
|
English  
35  
Menu system  
In Standby mode  
Function of the DPX701U  
In Standby mode  
Manual Clock Adjustment  
Date Mode  
Setting the date format.  
You can do this adjustment when the <Synchronize  
Clock> (page 36) is set as OFF.  
1 Select Date Mode  
Push the Control knob towards [FM] or [AM].  
Select the "Date Mode" display.  
1 Select Clock Adjustment mode  
Push the Control knob towards [FM] or [AM].  
Select the "Clock Adjust"/ "CLK ADJ" display.  
2 Select the date format  
Push the Control knob towards [4] or  
[¢].  
2 Enter Clock Adjust mode  
Press the Control knob for at least 1 second.  
The clock display blinks.  
3 Exit Menu mode  
Press the [MENU] button.  
3 Adjust the hours  
Push the Control knob towards [FM] or [AM].  
Adjust the minutes  
Push the Control knob towards [4] or  
[¢].  
In Standby mode  
4 Exit Clock adjustment mode  
Press the [MENU] button.  
Synchronize Clock  
Synchronizing the RDS station time data and this  
unit’s clock.  
Display  
Setting  
"SYNC : ON"/ "SYNC ON" Synchronizes the time.  
"SYNC : OFF"/ "SYNC OFF" Adjust the time manually.  
Function of the DPX701U  
In Standby mode  
Date Adjustment  
It takes 3 to 4 minutes to synchronize the clock.  
1 Select Date Adjust mode  
Push the knob towards [FM] or [AM].  
Select the "Date Adjust" display.  
2 Enter Date Adjust mode  
Press the Control knob for at least 1 second.  
The date display blinks.  
In Standby mode  
Indirect Lighting  
3 Selecting the item (day, month, or year) to  
adjust  
You can illuminate the area around the display  
with soft indirect lighting.  
Push the Control knob towards [4] or  
Display  
Setting  
[¢].  
"Lighting : ON"/ "LGHT ON" Turns indirect lighting on.  
"Lighting : OFF"/ "LGHT OFF" Turns indirect lighting off.  
The items that are blinking are items that you  
can adjust.  
4 Adjust each item  
Push the Control knob towards [FM] or [AM].  
5 Repeat step 3 and 4 operation and adjust the  
date.  
6 Exit Date adjustment mode  
Press the [MENU] button.  
|
36  
English  
Function of the DPX501U  
In Standby mode  
Display Illumination Control  
This function turns off the display when you  
perform no operation for 5 seconds. This function  
is effective when you are driving at night.  
Switching preout  
Alternating the preout between the rear and  
subwoofer. (With the subwoofer the sound  
outputs without being effected by fader control.)  
Display  
Setting  
"Display : ON"/  
"DISP ON"  
Keeps the display on.  
Display  
Setting  
"SWPRE R"  
"SWPRE SW"  
Rear preout.  
Subwoofer preout.  
"Display : OFF"/  
"DISP OFF"  
Turns off the display when you perform no  
operation for 5 seconds.  
Set the Display Illumination Control when the  
<Demonstration mode Setting> (page 44) is set to  
OFF.  
When the display is off, pressing any key will turn on  
the display.  
In Standby mode  
Built-in Amp Setting  
When the display is off, you cannot perform any  
operation except for the following:  
Controlling the built-in amplifier.  
Turning OFF this control enhances the preout  
quality.  
Volume  
Attenuator  
Selecting the source  
Ejecting the disc  
Turning off the power  
Display  
Setting  
"AMP : ON"/ "AMP ON"  
The built-in amplifier activates.  
"AMP : OFF"/ "AMP OFF" The built-in amplifier deactivates.  
During function control, such as the Menu System, the  
display stays on.  
Other than Standby mode/  
When the Dual Zone System is ON  
Dual Zone System Setting  
In Standby mode  
Dimmer  
Setting the Front channel and Rear channel  
sound in the Dual Zone System.  
Dimming this unit’s display automatically when  
the vehicle light switch is turned ON.  
Display  
"Zone2 : Rear"/ Sub source (Auxiliary input source) is to be rear  
"ZONE2 R" channel.  
"Zone2 : Front"/ Sub source (Auxiliary input source) is to be front  
"ZONE2 F" channel.  
Setting  
Display  
"Dimmer : ON"/ "DIM ON"  
"Dimmer : OFF"/ "DIM OFF"  
Setting  
The display dims.  
The display doesn’t dim.  
|
English  
37  
Menu system  
Other than Standby mode  
When LX AMP unit connecting  
B.M.S. (Bass Management System)  
AMP Control  
Adjust the bass boost level of the external  
amplifier using the main unit.  
You can control the LX AMP connected to the  
unit.  
Display  
Setting  
1 Select AMP Control mode  
"AMP Bass : Flat"/ "BMS FLT"Bass boost level is flat.  
"AMP Bass : +6"/  
"BMS +6"  
"AMP Bass : +12"/  
"BMS +12"  
"AMP Bass : +18"/  
"BMS +18"  
Push the Control knob towards [FM] or [AM].  
Select the "AMP Control"/ "AMP CTRL" display.  
Bass boost level is low (+6dB).  
2 Enter AMP Control mode  
Press the Control knob for at least 1 second.  
Bass boost level is mid (+12dB).  
Bass boost level is high (+18dB).  
3 Select the AMP Control item for adjustment  
Push the Control knob towards [FM] or [AM].  
Refer to the catalog or instruction manual for power  
For the details on the AMP Control item, see the  
Instruction manual attached to the LX AMP.  
amplifiers that can be controlled from this unit.  
For amplifiers, there are the models you can set from  
Flat to +18 dB, and the models you can set from Flat  
to +12 dB.  
When an amplifier that can only be set to +12 is  
connected to the unit, "AMP Bass : +18"/ "BMS +18"  
will not work correctly even if it is selected.  
4 Adjust the AMP Control item  
Push the Control knob towards [4] or  
[¢].  
5 Exit AMP Control mode  
Press the [MENU] button.  
You cannot use the LX AMP operation during standby  
mode.  
Other than Standby mode  
B.M.S. Frequency Offset  
Setting the central frequency, boosted by B.M.S.  
Display  
Setting  
"AMP FREQ : Normal"/ Boost with the normal central frequency.  
"BMSF NML"  
"AMP FREQ : Low"/  
"BMSF LOW"  
Drop the normal central frequency 20%.  
|
38  
English  
In Tuner mode  
News Bulletin with Timeout Setting  
Local Seek  
The tuner automatically changes when a news  
bulletin starts even if the radio is not being  
listened to. Also, you can set the time interval  
when interruption is prohibited.  
Only stations whose reception is good are  
searched in auto seek tuning.  
Display  
Setting  
"Local Seek : OFF"/  
"LO.S OFF"  
"Local Seek : ON"/  
"LO.S ON"  
The local seek function is OFF.  
Display and Setting  
"News : OFF"/ "NEWS OFF"  
"News : 00min"/ "NEWS 00M"  
The local seek function is ON.  
"News : 90min"/ "NEWS 90M"  
When you set "News : 00min"/ "NEWS 00M" —  
"News : 90min"/ "NEWS 90M", the News Bulletin  
Interrupt function is ON.  
In Tuner mode  
When the News Bulletin is ON, the "NEWS"  
indicator is ON. (DPX501U only)  
When the news bulletin starts, "NEWS" is  
displayed, and the tuner changes to the news  
bulletin.  
Tuning Mode  
Sets the tuning mode.  
Tuning mode  
Auto seek  
Display  
Operation  
"Seek Mode Automatic search for a station  
: Auto1"/  
"AUTO 1"  
.
If you choose the "News : 20min"/ "20MIN" setting,  
further news bulletins will not be received for 20  
minutes once the first news bulletin is received.  
The news bulletin volume is the same level that was  
set for <Traffic Information> (page 24).  
This news bulletin function is only available if the  
desired station sends PTY-code for news bulletin or  
belongs to <Enhanced Other Network>-Network  
sending PTY-code for news bulletin.  
Preset station seek "Seek Mode Search in order of the stations  
: Auto2"/  
"AUTO 2"  
in the Preset memory.  
Manual  
"Seek Mode Normal manual tuning control  
: Manual"/  
"MANUAL"  
.
When the News Bulletin Interrupt function is ON, the  
tuner changes to an FM station.  
AF (Alternative Frequency)  
When the reception is poor, automatically  
alternate to another frequency broadcasting the  
same program in the same RDS network with  
better reception.  
Display  
Setting  
"AF : ON"/ "AF ON"  
The AF function is ON.  
"AF : OFF"/ "AF OFF" The AF function is OFF.  
When the AF function is ON, the "RDS" indicator  
is ON.  
When no other stations with stronger reception are  
available for the same program in the RDS network,  
you may hear the incoming broadcast in bits and  
snatches. Turn OFF the AF function in such a case.  
|
English  
39  
Menu system  
Restricting RDS Region (Region  
Restrict Function)  
External Display Control  
Changing the display of the External Display  
connected to this unit.  
You can choose whether or not to restrict the  
RDS channels, received with the AF function for a  
particular network, to a specific region.  
Display  
"DISP Out Select"/ "OEM DISP"  
Display  
"Regional : ON"/  
"REG ON"  
"Regional : OFF"/  
"REG OFF"  
Setting  
Each time you push the knob towards [4] or  
[¢], the display switches.  
The Region Restrict Function is ON.  
The Region Restrict Function is OFF.  
If AF function is not restricted to the specified region  
and network, the AF function sets up to search the  
station with good reception in the same RDS network.  
Function of the DPX701U  
Disc Naming (DNPS)  
Attaching a title to a CD.  
1 Play the disc you want to attach a name to  
Auto TP Seek  
A title cannot be attached to MD or Audio file media.  
When the TI function is ON and the reception  
is poor while listening to a traffic information  
station, another traffic information station  
with better reception will be searched for  
automatically.  
2 Enter Menu mode  
Press the [MENU] button for at least 1 second.  
"MENU" is displayed.  
3 Select Name set mode  
Push the Control knob towards [FM] or [AM].  
Select the "Name Set" display.  
Display  
Setting  
"Auto TP Seek : ON"/ The Auto TP Seek Function is ON.  
"ATPS ON"  
"Auto TP Seek : OFF"/ The Auto TP Seek Function is OFF.  
"ATPS OFF"  
4 Enter Name set mode  
Press the Control knob for at least 1 second.  
5 Move the cursor to the enter character  
position  
Push the Control knob towards [4] or  
[¢].  
6 Select the character type  
Press the Control knob.  
Each time you press the knob, the character type  
alternates between the types shown in the table  
below.  
In FM reception  
Monaural Reception  
You can reduce the noise when stereo broadcasts  
are received as monaural.  
Character type  
Alphabet upper case  
Alphabet lower case  
Numbers and symbols  
Special characters (Accent characters)  
Display  
Setting  
The monaural reception is OFF.  
"MONO : OFF"/  
"MONO OFF"  
"MONO : ON"/  
"MONO ON"  
The monaural reception is ON.  
7 Select the characters  
Push the Control knob towards [FM] or [AM].  
|
40  
English  
5 Select the Auxiliary input display  
Push the Control knob towards [4] or  
You can enter characters by using a remote control  
with a number button.  
Example: If you enter "DANCE".  
[¢].  
Each time you push the knob, the display  
alternates as listed below.  
• "AUX"/ "AUX EXT"  
• "DVD"  
• "PORTABLE"  
• "GAME"  
Character  
"D"  
"A"  
"N"  
"C"  
Button  
[3]  
[2]  
[6]  
[2]  
Times pressed  
1
1
2
3
2
• "VIDEO"  
• "TV"  
"E"  
[3]  
6 Exit Menu mode  
Press the [MENU] button.  
8 Repeat steps 5 through 7 and enter the name.  
9 Exit Menu mode  
Press the [MENU] button.  
When operation stops for 10 seconds, the name at  
that time is registered, and the Auxiliary input display  
setting mode closes.  
The Auxiliary Input Display can be set only when the  
built-in auxiliary input or the auxiliary input of optional  
KCA-S210A is used.  
Function of the DPX701U (Russian sales area)  
In Standby mode  
Selecting Russian Characters  
Select Russian as a text display language.  
Display  
Setting  
"Russian : ON"  
"Russian : OFF"  
Displays texts using Russian characters.  
Displays texts using European characters.  
Texts displayed using Russian characters are as follows.  
- Folder name/ File name/ Song title/ Artist name/  
Album name  
Texts cannot distinguish upper case and lower case in  
Russian characters.  
|
English  
41  
Menu system  
In Standby mode  
Text Scroll  
Power OFF Timer  
Setting the displayed text scroll.  
Setting the timer to turn this unit’s power OFF  
automatically when Standby mode continues.  
Using this setting can save the vehicle’s battery  
power.  
Display  
Setting  
Doesn’t scroll.  
"Scroll : Manual"/  
"SCL MANU"  
"Scroll : Auto"/  
"SCL AUTO"  
Scrolls when the display changes.  
Display  
Setting  
"Power OFF : – – – –"/ Power OFF Timer function is OFF.  
"OFF – – –"  
"Power OFF : 20min"/ Turns the power OFF after 20 minutes.  
"OFF 20M"  
(Original setting)  
"Power OFF : 40min"/ Turns the power OFF after 40 minutes.  
"OFF 40M"  
"Power OFF : 60min"/ Turns the power OFF after 60 minutes.  
"OFF 60M"  
The text scrolled is listed below.  
- CD text  
- Folder name/ File name/ Song title/ Artist name/  
Album name  
- MD title  
- Radio text  
Do this setting after setting <Security Code> (page  
35).  
In Standby mode  
Built-in Auxiliary input Setting  
Set the Built-in Auxiliary Input function.  
In Standby mode  
Display  
Setting  
CD Read Setting  
"Built in AUX : OFF"/ When selecting the source there’s no  
"AUX OFF"  
"Built in AUX : ON"/  
"AUX ON"  
Auxiliary Input.  
When selecting the source there’s Auxiliary  
Input.  
When there is a problem with playing a CD with  
special format, this setting plays the CD by force.  
Display  
Setting  
"CD Read : 1"/ "CD READ 1" Play CD and Audio file.  
"CD Read : 2"/ "CD READ 2" Play CD by force.  
Setting "CD Read : 2"/ "CD READ 2" cannot play Audio  
file.  
Some music CDs may not play even in the "CD Read :  
2"/ "CD READ 2" mode.  
|
42  
English  
Function of ACDrive media  
Other than Standby mode  
Voice Index  
Audio Preset Memory  
Setting the announcement during the play of  
ACDrive media.  
Registering the value setup by Sound Control. The  
memory cannot be erased by the Reset button.  
Display  
"Voice Index : ON"/  
"V-ID ON"  
"Voice Index : OFF"/  
"V-ID OFF"  
Setting  
1 Setup Sound Control  
Refer to the following operations to setup the  
Sound Control.  
- <Audio Control> (page 47)  
- <Audio Setup> (page 14)  
Guide is announced.  
Not be announced.  
2 Enter Menu mode  
Press the [MENU] button for at least 1 second.  
"MENU" is displayed.  
DPX701U (Russian sales area)  
Default setting is "Voice Index : OFF"  
3 Select Audio Preset mode  
Push the Control knob towards [FM] or [AM].  
Select the "Audio Preset"/ "A-PRESET" display.  
4 Enter Audio Preset mode  
Press the Control knob for at least 1 second.  
In CD/ USB mode  
ACDrive firmware version display  
5 Select the Audio Preset Memory  
Push the Control knob towards [FM] or [AM].  
Select the "Memory"/ "MEMORY" display.  
Displaying the firmware version with the ACDrive  
function.  
6 Put the Audio Preset in the memory  
Press the Control knob for at least 2 seconds.  
The "Memory"/ "MEMORY" display blinks 1 time.  
1 Select the firmware version display mode  
Push the Control knob towards [FM] or [AM].  
Select the "ACD F/W Version"/ "ACD VER" display.  
7 Exit Audio Preset mode  
Press the [MENU] button.  
2 Display the ACDrive firmware version  
Push the Control knob towards [4] or  
[¢].  
Register 1 pair of Audio Preset Memory. You cannot  
register by the source.  
When you press the Reset, all the sources will be the  
setting value which is registered.  
The following items cannot be registered.  
Volume, Balance, Fader, Loudness, Volume offset, Dual  
Zone System, Rear Volum  
In CD/ USB mode  
Unique ID display  
Displaying the serial number for each product.  
1 Select the unique ID display mode  
Push the Control knob towards [FM] or [AM].  
Select the "ACD Unique ID"/ "ACD ID" display.  
2 Display the unique ID  
Push the Control knob towards [4] or  
[¢].  
|
English  
43  
Menu system  
Other than Standby mode  
In Standby mode  
Audio Preset Recall  
Demonstration mode Setting  
Recalling the sound setup registered by <Audio  
Preset Memory> (page 43).  
Sets the demonstration mode.  
1 Select the Demonstration mode  
Push the Control knob towards [FM] or [AM].  
Select the "DEMO Mode"/ "DEMO" display.  
1 Select the source  
Press the [SRC] button.  
2 Enter Menu mode  
2 Set the Demonstration mode  
Press the [MENU] button for at least 1 second.  
"MENU" is displayed.  
Press the Control knob for at least 2 seconds.  
Each time you press the knob at least 2 seconds,  
the Demonstration mode alternates between the  
settings shown in the table below.  
3 Select Audio Preset mode  
Push the Control knob towards [FM] or [AM].  
Select the "Audio Preset"/ "A-PRESET" display.  
Display  
Setting  
"DEMO Mode : ON"/ The Demonstration mode function is ON.  
"DEMO ON"  
"DEMO Mode : OFF"/ Exit Demonstration mode (Normal mode).  
"DEMO OFF"  
4 Enter Audio Preset mode  
Press the Control knob for at least 1 second.  
5 Select the Audio Preset Recall  
Push the Control knob towards [FM] or [AM].  
Select the "Recall"/"RECALL" display.  
6 Recall the Audio Preset  
Press the Control knob for at least 2 seconds.  
The "Recall"/"RECALL" display blinks 1 time.  
7 Exit Audio Preset mode  
Press the [MENU] button.  
The User memory of <System Q> (page 12) is  
changed to the value which was recalled.  
The source tone memory item of <Audio Control>  
(page 47) is changed to the value which was recalled  
by the selected source.  
|
44  
English  
|
English  
45  
Accessory of the DPX701U  
Basic Operations of remote control  
SRC  
ATT  
VOL  
SRC  
AT T  
VOL  
38  
AUD  
AUD  
38  
FM+  
4
¢
4/¢  
AM–  
2-ZONE  
ABC  
FM/AM/+/–  
Not Used  
2-ZONE  
DIRECT  
/OK  
DIRECT  
DEF  
MNO  
WXY  
GHI  
JKL  
[0] — [9]  
PRS  
TUV  
QZ  
R.VOL  
Loading and Replacing the battery  
Basic operations  
Use two "AA"/ "R6"-size batteries.  
Slide the cover while pressing downwards to  
remove it as illustrated.  
Insert the batteries with the + and – poles aligned  
properly, following the illustration inside the case.  
[VOL] buttons  
Adjusts the volume.  
[SRC] button  
Each time you press the button, the source  
alternates.  
For the source alternating order refer to  
<Selecting the Source> (page 11).  
[ATT] button  
Turns the volume down quickly.  
When the button is pressed again, the volume  
returns to the previous level.  
2WARNING  
Store unused batteries out of the reach of children.  
Contact a doctor immediately if the battery is  
accidentally swallowed.  
Do not set the remote control in hot places such as  
on the dashboard.  
|
46  
English  
Audio Control  
In Disc/USB source  
[AUD] button  
Selects the Audio item to be adjusted.  
[4]/ [¢] buttons  
Going forwards and backwards between track/  
files.  
[VOL] buttons  
Adjusts the Audio item.  
[+]/ [] buttons  
Going forwards and backwards between disc/  
folders.  
Refer to <Audio Control> (page 47) for the operation  
method, such as the procedures for Audio control and  
others operations.  
The remote control can only select and adjust the  
Basic Audio item. Selecting and adjusting of the Detail  
Audio item cannot be done.  
[38] button  
Each time you press the button, the song pauses  
or plays.  
[0] — [9] buttons  
When in <Direct Track/File Search> (page 29) and  
<Direct Disc Search> (page 29), enters the track/  
file/disc number.  
Dual Zone System  
[2-ZONE] button  
Each time you press the button, "2 ZONE" of  
<Audio Setup> (page 14) is turned ON or OFF.  
[5]/ [] buttons  
Adjusts the volume of the rear channel.  
The rear channel activates while the Dual Zone  
System is ON.  
In Tuner source  
[FM]/ [AM] buttons  
Selects the band.  
Each time you press the [FM] button, the band  
alternates between the FM1, FM2, and FM3  
bands.  
[4]/ [¢] buttons  
Tune up or down band.  
[0] — [9] buttons  
Press buttons [1] — [6] to recall preset stations.  
[DIRECT] button  
Enters and cancels the <Direct Access Tuning>  
(page 22) mode.  
[38] button  
Enters and cancels the <PTY (Program Type)>  
(page 25) mode.  
|
English  
47  
Accessories/ Installation Procedure  
5. Take Connector A on the wiring harness and  
connect it to the external power connector on  
your vehicle.  
6. Connect the wiring harness connector to the  
unit.  
Accessories  
1
7. Install the unit in your car.  
8. Reconnect the - terminal of the battery.  
9. Press the reset button.  
..........1  
2
If the power is not turned ON (or it is ON, but will be OFF  
immediately), the speaker wire may have a short-circuit  
or touched the chasis of the vehicle and the protection  
function may have been activated. Therefore, the speaker  
wire should be checked.  
..........2  
3
If your car is not prepared for this special connection-  
system, consult your Kenwood dealer.  
Only use antenna conversion adapters (ISO-JASO) when  
the antenna cord has an ISO plug.  
..........1  
Make sure that all wire connections are securely made by  
inserting jacks until they lock completely.  
4
If your vehicle’s ignition does not have an ACC position,  
or if the ignition wire is connected to a power source  
with constant voltage such as a battery wire, the power  
will not be linked with the ignition (i.e., it will not turn on  
and off along with the ignition). If you want to link the  
unit’s power with the ignition, connect the ignition wire  
to a power source that can be turned on and off with the  
ignition key.  
..........1  
5
If the fuse blows, first make sure that the wires have not  
caused a short circuit, then replace the old fuse with one  
with the same rating.  
..........1  
Insulate unconnected wires with vinyl tape or other  
similar material. To prevent short circuits, also do not  
remove the caps on the ends of the unconnected wires  
or the terminals.  
Connect the speaker wires correctly to the terminals to  
which they correspond. The unit may receive damage or  
fail to work if you share the - wires and/or ground them  
to any metal part in the car.  
6
..........1  
7
After the unit is installed, check whether the brake lamps,  
indicators, wipers, etc. on the car are working properly.  
If the console has a lid, make sure to install the unit so  
that the faceplate does not hit the lid when closing and  
opening.  
..........1  
Installation Procedure  
Mount the unit so that the mounting angle is 30° or less.  
1. To prevent short circuits, remove the key from  
the ignition and disconnect the - terminal of  
the battery.  
2. Make the proper input and output wire  
connections for each unit.  
3. Connect the wire on the wiring harness.  
4. Take Connector B on the wiring harness and  
connect it to the speaker connector in your  
vehicle.  
|
48  
English  
Connecting Wires to Terminals  
EXT.  
CONT  
MUTE  
P.CONT  
ANT.CONT  
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
English  
|
49  
Connecting Wires to Terminals  
Connector Function Guide  
Pin Numbers for Cable Colour  
ISO Connectors  
External Power  
Connector  
2WARNING  
Connecting the ISO Connector  
The pin arrangement for the ISO connectors depends  
on the type of vehicle you drive. Make sure to make the  
proper connections to prevent damage to the unit.  
The default connection for the wiring harness is described  
in 1 below. If the ISO connector pins are set as described  
in 2 or 3, make the connection as illustrated.  
Functions  
A-4  
A-5  
A-6  
A-7  
A-8  
Yellow  
Battery  
Power Control  
Dimmer  
Ignition (ACC)  
Earth (Ground)  
Connection  
Blue/White  
Orange/White  
Red  
Please be sure to reconnect the cable as shown 2 below  
to install this unit to the Volkswagen vehicles etc.  
Black  
Speaker  
Connector  
1(Default setting) The A-7 pin (red) of the vehicle’s  
ISO connector is linked with the ignition, and  
the A-4 pin (yellow) is connected to the constant  
power supply.  
B-1  
B-2  
B-3  
B-4  
B-5  
Purple  
Purple/Black  
Gray  
Gray/Black  
White  
Rear Right (+)  
Rear Right (–)  
Front Right (+)  
Front Right (–)  
Front Left (+)  
Ignition cable (Red)  
Unit  
Battery cable (Yellow)  
A-7 Pin (Red)  
B-6  
B-7  
B-8  
White/Black  
Green  
Green/Black  
Front Left (–)  
Rear Left (+)  
Rear Left (–)  
Vehicle  
A-4 Pin (Yellow)  
2The A-7 pin (red) of the vehicle’s ISO connector  
is connected to the constant power supply, and  
the A-4 pin (yellow) is linked to the ignition.  
Ignition cable  
A-7 Pin (Red)  
(Red)  
Unit  
Vehicle  
A-4 Pin (Yellow)  
Battery cable  
(Yellow)  
3The A-4 pin (yellow) of the vehicle’s ISO  
connector is not connected to anything, while  
the A-7 pin (red) is connected to the constant  
power supply (or both the A-7 (red) and A-4  
(yellow) pins are connected to the constant  
power supply).  
Ignition cable (Red)  
Unit  
Battery cable (Yellow)  
A-7 Pin (Red)  
Vehicle  
A-4 Pin (Yellow)  
When the connection is made as in 3 above, the unit’s  
power will not be linked to the ignition key. For that  
reason, always make sure to turn off the unit’s power  
when the ignition is turned off.  
To link the unit’s power to the ignition, connect the  
ignition cable (ACC...red) to a power source that can be  
turned on and off with the ignition key.  
|
50  
English  
Installing the Escutcheon  
For General Motors  
1 Refer to the section <Removing the  
Hard Rubber Frame> (page 53) and  
then remove the hard rubber frame.  
Cut out to meet the shape of the  
opening in the vehicle.  
2 Cut out accessory 4 to meet the  
shape of the opening of the center  
console.  
3 Attach accessory 4 to the unit.  
Accessory4  
For TOYOTA/ SCION  
1 Refer to the section <Removing  
the Hard Rubber Frame> (page 53)  
and then remove the hard rubber  
frame.  
Cutting line  
2 Cut out accessory 4 as illustrated.  
When cutting out accessory 4, make  
sure it fits the opening of the center  
console.  
Accessory4  
3 Fold double-sided adhesive  
(accessory 5) along the slit and  
attach it to accessory 4 cut-out  
against the center rib as illustrated.  
Use 2 pieces of accessory 5 for 1  
accessory 4 cut-out.  
Accessory5  
4 Attach accessory 4 cut-out to the  
unit.  
English  
|
51  
Installation  
Installing the Unit  
Firewall or metal support  
Screw (M4X8)  
(commercially available)  
Bend the tabs of the mounting  
sleeve with a screwdriver or similar  
utensil and attach it in place.  
Self-tapping screw  
(commercially available)  
Accessory6  
Metal mounting strap  
(commercially available)  
USB Device Connection  
1 Remove the cap and connect the USB cable  
(Accessory7).  
2 Connect the USB device to the unit using the  
supplied cable.  
|
52  
English  
Removing the Hard Rubber Frame  
(escutcheon)  
1 Engage the catch pins on the removal tool 2  
and remove the two locks on the lower level.  
Lower the frame and pull it forward as shown in  
the figure.  
2 When the lower level is removed, remove the  
upper two locations.  
The frame can be removed from the top side in the same  
manner.  
Removing the Unit  
1 Refer to the section <Removing the Hard Rubber  
Frame> and then remove the hard rubber frame.  
2 Remove the Hex-head screw with integral  
washer (M4X8) on the back panel.  
3 Insert the two removal tools 2 deeply into the  
slots on each side, as shown.  
4 Lower the removal tool towards the bottom, and  
pull out the unit halfway while pressing towards  
the inside.  
Be careful to avoid injury from the catch pins on the  
removal tool.  
5 Pull the unit all the way out with your
carefully not to drop it.  
Troubleshooting Guide  
What might seem to be a malfunction in your unit  
may just be the result of slight misoperation or  
miswiring. Before calling service, first check the  
following table for possible problems.  
? No sound can be heard, or the volume is low.  
The fader or balance settings are set all the way to  
one side.  
Center the fader and balance settings.  
The input/output wires or wiring harness are  
connected incorrectly.  
Reconnect the input/output wires or the  
wiring harness correctly. See the section on  
<Connecting Wires to Terminals>.  
General  
? The power does not turn ON.  
The fuse has blown.  
The values of Volume offset are low.  
After checking for short circuits in the wires,  
replace the fuse with one with the same  
rating.  
Turn up the Volume offset, referring to the  
section on <Audio Setup> (page 14).  
The <Built-in Amp Setting> (page 37) is OFF.  
Turn it ON.  
? There’s a source you can’t switch.  
There’s no media inserted.  
? The sound quality is poor or distorted.  
Set the media you want to listen to. If there’s  
no media in this unit, you can’t switch to each  
source.  
One of the speaker wires is being pinched by a  
screw in the car.  
Check the speaker wiring.  
The Disc changer isn’t connected.  
The speakers are not wired correctly.  
Connect the Disc changer. If the Disc changer  
isn’t connected to it’s input terminal, You can’t  
switch to an external disc source.  
Reconnect the speaker wires so that each  
output terminal is connected to a different  
speaker.  
? The memory is erased when the ignition is  
turned OFF.  
? The Touch Sensor Tone doesn’t sound.  
The preout jack is being used.  
The ignition and battery wire are incorrectly  
The Touch Sensor Tone can’t be output from  
the preout jack.  
connected.  
Connect the wire correctly, referring to the  
section on <Connecting Wires to Terminals>.  
The <Touch Sensor Tone> (page 35) is OFF.  
Turn it ON.  
? There’s no loudness effect.  
You’re using Subwoofer preout.  
Loudness has no effect in Subwoofer preout.  
? Even though Synchronize Clock is ON, the clock  
can’t be adjusted.  
The received RDS station isn’t sending time data.  
Receive another RDS station.  
? The TEL mute function does not work.  
The TEL mute wire is not connected properly.  
? The Dimmer function does not work.  
Connect the wire correctly, referring to the  
section on <Connecting Wires to Terminals>.  
The Dimmer wire is not connected correctly.  
Check the Dimmer wire connection.  
The <Dimmer> (page 37) is OFF.  
Turn it ON.  
? The TEL mute function turns ON even though the  
TEL mute wire is not connected.  
The TEL mute wire is touching a metal part of the  
? The sound is not output from Subwoofer or it  
outputs the different sound.  
car.  
Pull the TEL mute wire away from the metal  
part of the car.  
When "2 ZONE"/ "2ZON" of <Audio Setup> (page  
14) is set to ON.  
Set "2 ZONE" of <Audio Setup> to OFF.  
? Even if Loudness is turned ON, high-pitched tone  
isn’t compensated for.  
? Cannot display the Russian characters.  
Tuner source is selected.  
---  
High-pitched tone isn’t compensated for when  
in Tuner source.  
Refer to <Selecting Russian Characters> (page  
41).  
? The display blacks out while scrolling.  
<Display Illumination Control> is set to OFF.  
Refer to <Display Illumination Control> (page  
37).  
|
54  
English  
Tuner source  
Disc source  
? Radio reception is poor.  
? "AUX EXT" is displayed without achieving  
The car antenna is not extended.  
External disc control mode.  
Pull the antenna out all the way.  
Unsupported disc changer is connected.  
The antenna control wire is not connected.  
Use the disc changer mentioned in the  
<About CD players/disc changers connected  
to this unit> (page 4) of the section on <Safety  
precautions>.  
Connect the wire correctly, referring to the  
section on <Connecting Wires to Terminals>.  
? The desired frequency can’t be entered with the  
Direct Access Tuning.  
? The specified disc does not play, but another one  
plays instead.  
A station that can’t be received is being entered.  
Enter a station that can be received.  
The specified CD is quite dirty.  
You’re trying to enter a frequency with a 0.01 MHz  
unit.  
Clean the CD.  
The disc is loaded in a different slot from that  
specified.  
What can be designated in the FM band is to  
0.1 MHz.  
Eject the disc magazine and check the  
number for the specified disc.  
? It isn’t the set Traffic information sound volume.  
The disc is severely scratched.  
Try another disc instead.  
The set sound volume is less than the tuner sound  
volume.  
If the tuner sound volume is louder than the  
set sound volume, the tuner sound volume is  
used.  
? A CD ejects as soon as it is loaded.  
The CD is quite dirty.  
Clean the CD, referring to the CD cleaning of  
the section on <About CDs> (page 7).  
? Can’t remove disc.  
The cause is that more than 10 minutes has  
elapsed since the vehicle ACC switch was turned  
OFF.  
The disc can only be removed within 10  
minutes of the ACC switch being turned OFF.  
If more than 10 minutes has elapsed, turn  
the ACC switch ON again and press the Eject  
button.  
? The disc won’t insert.  
There’s already another disc inserted.  
Press the [0] button and remove the disc.  
? Direct Search can’t be done.  
Another function is ON.  
Turn Random Play or other functions OFF.  
? Track Search can’t be done.  
For the discs/folders first or last song.  
For each disc/folder, Track Search can’t be  
done in the backward direction for the first  
song or in the forward direction for the last  
song.  
English  
|
55  
Troubleshooting Guide  
Audio file source  
The messages shown below display your  
systems condition.  
? Cannot play an Audio file.  
The media is scratched or dirty.  
Eject/ EJECT: No disc magazine has been loaded in  
the changer. The disc magazine is not  
completely loaded.  
Clean the media, referring to the CD cleaning  
of the section on <About CDs> (page 7).  
Load the disc magazine properly.  
No CD in the unit.  
Insert the CD.  
? The sound skips when an Audio file is being  
played.  
The media is scratched or dirty.  
Clean the media, referring to the CD cleaning  
of the section on <About CDs> (page 7).  
No Disc/ NO DISC:  
No disc has been loaded in the disc  
magazine.  
Load a disc into the disc magazine.  
The recording condition is bad.  
Record the media again or use another media.  
? The Audio file track time isn’t displayed correctly.  
TOC Error/ TOC ERR:  
---  
No disc has been loaded in the disc  
magazine.  
Load a disc into the disc magazine.  
The CD is quite dirty. The CD is upside-  
down. The CD is scratched a lot.  
Clean the CD and load it correctly.  
There are times when it isn’t displayed  
correctly according to the Audio file recording  
conditions.  
USB device source  
Read Error/ READ ERR:  
? The USB device is not detected.  
• The number of files or folders which are  
stored in the connected USB device is  
above the limitation.  
The USB connector is disconnected.  
Connect the connector of the USB device  
properly.  
• The file system of the connected USB  
device is broken.  
? The USB device does not play its audio files.  
The USB connector is disconnected.  
Copy the files and folders for the  
USB device again referring to www.  
kenwood.mediamanager.jp. If the error  
message is still displayed, initialize the  
USB device or use other USB devices.  
Connect the connector of the USB device  
properly.  
Error 05/ E-05: The CD is upside-down.  
Load the CD correctly.  
Blank Disc/ BLANK:  
Nothing has been recorded on the MD.  
No Track/ NO TRACK:  
No tracks are recorded on the MD,  
although it has a title.  
Error 15/ E-15: Media was played that doesn’t have data  
recorded that the unit can play.  
Use media that has data recorded that  
the unit can play.  
No Panel/ NO PANEL:  
The faceplate of the slave unit being  
connected to this unit has been removed.  
Replace it.  
Error 77/ E-77: The unit is malfunctioning for some reason.  
Press the reset button on the unit. If  
the "Error 77/ E-77" code does not  
disappear, consult your nearest service  
center.  
|
56  
English  
Mecha Error/ E-99:  
Something is wrong with the disc  
DEMO MODE (Blink):  
The Demonstration mode has been  
magazine. Or the unit is malfunctioning for  
some reason.  
selected.  
The <Demonstration mode Setting>  
(page 44) is ON. Turn it OFF.  
Check the disc magazine. And then  
press the reset button on the unit. If  
the "Mecha Error/ E-99" code does not  
disappear, consult your nearest service  
center.  
No Device/ NO DVICE:  
The USB device is selected as a source  
although no USB device is connected.  
Change the source to any source other  
than USB. Connect an USB device, and  
change the source to USB again.  
Hold Error/ HOLD:  
The protective circuit in the unit activates  
when the temperature inside the  
automatic disc changer exceeds 60°C  
(140°F), stopping all operation.  
Cool down the unit by opening  
the windows or turning on the air  
conditioner. As the temperature falls  
below 60°C (140°F), the disc will start  
playing again.  
N/A Device/ NA DVICE:  
An unsupported USB device is connected.  
For the supported USB devices, refer to  
<About USB device> (page 10).  
No Music Data/ NO MUSIC:  
• The connected USB device contains no  
playable audio file.  
• Media was played that doesn’t have data  
recorded that the unit can play.  
Use media that has data recorded that  
the unit can play.  
No Name:  
Attempted to display DNPS during the CD  
play having no disc names preset.  
Waiting/ WAITING:  
Radio text data is being received.  
Load/ LOAD: Discs are being exchanged in the Disc  
changer.  
USB Error/ USB ERR:  
The connected USB device is rated a  
current capacity higher than the allowable  
limit.  
Check the USB device with reference to  
<About USB device> (page 10).  
Some trouble may have occurred to the  
connected USB device.  
Remove the USB device and then  
reconnect it. When the same message  
displays again, use another USB device.  
Reading/ READING:  
The unit is reading the data on the disc.  
IN (Blink):  
The CD player section is not operating  
properly.  
Reinsert the CD. If the CD cannot be  
ejected or the display continues to flash  
even when the CD has been properly  
reinserted, please switch off the power  
and consult your nearest service center.  
Protect/ PROTECT (Blink):  
The speaker wire has a short-circuit or  
touches the chassis of the vehicle, and  
then the protection function is activated.  
Wire or insulate the speaker cable  
properly and press the reset button.  
Unsupported File/ NA FILE:  
An Audio file is played with a format that  
this unit can’t support.  
----  
Copy Protection/ COPY PRO:  
A copy-protected file is played.  
----  
English  
|
57  
Specifications  
Specifications subject to change without notice.  
AAC decode  
FM tuner section  
Frequency range (50 kHz space)  
: 87.5 MHz – 108.0 MHz  
Usable sensitivity (S/N = 26dB)  
: 0.7 μV /75 Ω  
Quieting Sensitivity (S/N = 46dB)  
: 1.6 μV /75 Ω  
Frequency response ( 3.0 dB)  
: 30 Hz – 15 kHz  
Signal to Noise ratio (MONO)  
: 65 dB  
Selectivity (DIN) ( 400 kHz)  
: ≥ 80 dB  
Stereo separation (1 kHz)  
: 35 dB  
: AAC-LC ".m4a" files  
USB Interface  
USB Standard  
: USB 1.1/ 2.0  
Maximum Supply current  
: 500 mA  
File System  
: FAT16/ 32  
MP3 decode  
: Compliant with MPEG-1/2 Audio Layer-3  
WMA decode  
: Compliant with Windows Media Audio  
AAC decode  
: AAC-LC ".m4a" files  
MW tuner section  
Frequency range (9 kHz space)  
: 531 kHz – 1611 kHz  
Usable sensitivity (S/N = 20dB)  
: 25 μV  
Audio section  
Maximum output power  
: 50 W x 4  
Output power (DIN 45324, +B=14.4V)  
: 30 W x 4  
Speaker impedance  
: 4 – 8 Ω  
Tone action  
Bass : 100 Hz 8 dB  
Middle : 1 kHz 8 dB  
Treble : 10 kHz 8 dB  
LW tuner section  
Frequency range  
: 153 kHz – 281 kHz  
Usable sensitivity (S/N = 20dB)  
: 45 μV  
Preout level / Load  
CD player section  
Laser diode  
: GaAlAs  
Digital filter (D/A)  
: 8 Times Over Sampling  
D/A Converter  
: 1 Bit  
Spindle speed (Audio file)  
: 500 – 200 rpm (CLV)  
Wow & Flutter  
: Below Measurable Limit  
Frequency response ( 1 dB)  
: 10 Hz – 20 kHz  
Total harmonic distortion (1 kHz)  
: 0.008 %  
DPX701U: 5000 mV/10 kΩ (during disc play)  
DPX501U: 2500 mV/10 kΩ  
Preout impedance  
DPX701U: ≤ 80 Ω  
DPX501U: ≤ 600 Ω  
Auxiliary input  
Frequency response ( 1 dB)  
: 20 Hz – 20 kHz  
Input Maximum Voltage  
: 1200 mV  
Input Impedance  
: 100 kΩ  
General  
Signal to Noise ratio (1 kHz)  
DPX701U: 110 dB  
Operating voltage (11 – 16V allowable)  
: 14.4 V  
Current consumption  
: 10 A  
Installation Size (W x H x D)  
: 182 x 112 x 159 mm  
Weight  
DPX701U: 1.64 kg  
DPX501U: 105 dB  
Dynamic range  
: 93 dB  
MP3 decode  
: Compliant with MPEG-1/2 Audio Layer-3  
WMA decode  
: Compliant with Windows Media Audio  
DPX501U: 1.60 kg  
|
58  
English  

Nikon Cell Phone Accessories AW110 0 7599 User Manual
National Instruments Computer Accessories NI CANTM Software for Windows NT User Manual
Motorola TLKR T8 User Manual
Mitel Coffeemaker 5540 User Manual
LaCie 34 User Manual
KTI Networks Computer Accessories KS 124 User Manual
Kenwood KDC W241 User Manual
IronKey Secure Flash Drive Enterprise User Manual
Casio Cell Phone DT X7 User Manual
B&amp;B Electronics PCRTC User Manual