DUAL DIN SIZED CD RECEIVER
DPX701U
DPX501U
INSTRUCTION MANUAL
© B64-3402-00/01 (EW, E2W)
Contents
Safety precautions
Notes
4
5
CD/USB device/Audio file/External
disc control features
Playing CD & Audio file
Playing USB device
Playing External Disc
Fast Forwarding and Reversing
Track/File Search
Disc Search/Folder Search
Direct Track/File Search
Direct Disc Search
Track/File/Disc/Folder Repeat
Scan Play
Random Play
Magazine Random Play
All Random Play
Select mode
File Select mode
27
About CDs
7
About AAC, MP3 and WMA
About USB device
General features
Power
Selecting the Source
Volume
Attenuator
System Q
Audio Control
Adjusting the detail of Audio Control
Audio Setup
8
10
11
Folder Select 1 mode
Folder Select 2 mode
Switching the Play mode
Letter Seek
Speaker Setting
Subwoofer Output
TEL Mute
Text/Title Scroll
Switching Display
Display Type Selection
Graphic part Display Switching
Wallpaper selecting
Text Selection for Display
Text Display Switching
Font Color Select
Tuner features
Tuning
Direct Access Tuning
Station Preset Memory
Auto Memory Entry
Preset Tuning
22
24
RDS features
Traffic Information
Radio Text Scroll
PTY (Program Type)
Program Type preset
Changing Language for PTY Function
|
2
English
Menu system
Menu System
Security Code
34
Basic Operations of remote control 46
Accessories/ Installation Procedure 48
Touch Sensor Tone
Manual Clock Adjustment
Date Adjustment
Date Mode
Synchronize Clock
Indirect Lighting
Display Illumination Control
Dimmer
Switching preout
Built-in Amp Setting
Dual Zone System Setting
B.M.S. (Bass Management System)
B.M.S. Frequency Offset
AMP Control
Connecting Wires to Terminals
Installing the Escutcheon
Installation
49
51
52
53
54
58
Removing the Unit
Troubleshooting Guide
Specifications
News Bulletin with Timeout Setting
Local Seek
Tuning Mode
AF (Alternative Frequency)
Restricting RDS Region (Region Restrict
Function)
Auto TP Seek
Monaural Reception
External Display Control
Disc Naming (DNPS)
Auxiliary Input Display Setting
Selecting Russian Characters
Text Scroll
Built-in Auxiliary input Setting
Power OFF Timer
CD Read Setting
Voice Index
ACDrive firmware version display
Unique ID display
Audio Preset Memory
Audio Preset Recall
Demonstration mode Setting
The "AAC" logo is trademark of Dolby
Laboratories.
|
English
3
Safety precautions
Do Not Load 3-in. CDs in the CD slot
If you try to load a 3 in. CD with its adapter into the
unit, the adapter might separate from the CD and
damage the unit.
2WARNING
To prevent injury or fire, take the
following precautions:
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools)
inside the unit.
• Do not watch or fix your eyes on the unit’s display
when you are driving for any extended period.
• Mounting and wiring this product requires
skills and experience. For safety’s sake, leave the
mounting and wiring work to professionals.
About CD players/disc changers
connected to this unit
Kenwood disc changers/ CD players released in
1998 or later can be connected to this unit.
Refer to the catalog or consult your Kenwood
dealer for connectable models of disc changers/
CD players.
Note that any Kenwood disc changers/ CD players
released in 1997 or earlier and disc changers made
by other makers cannot be connected to this unit.
Connecting unsupported disc changers/CD players
to this unit may result in damage.
Set the "O-N" Switch to the "N" position for the
applicable Kenwood disc changers/ CD players.
The functions you can use and the information
that can be displayed may differ depending on the
models being connected.
2CAUTION
To prevent damage to the machine, take
the following precautions:
• Make sure to ground the unit to a negative 12V
DC power supply.
• Do not install the unit in a spot exposed to direct
sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of
water splashing.
• When replacing a fuse, only use a new fuse with
the prescribed rating. Using a fuse with the wrong
rating may cause your unit to malfunction.
•
You can damage both your unit and the CD changer if
you connect them incorrectly.
• Do not use your own screws. Use only the screws
provided. If you use the wrong screws, you could
damage the unit.
Lens Fogging
When you turn on the car heater in cold weather,
dew or condensation may form on the lens in the
CD player of the unit. Called lens fogging, this
condensation on the lens may not allow CDs to
play. In such a situation, remove the disc and wait
for the condensation to evaporate. If the unit still
does not operate normally after a while, consult
your Kenwood dealer.
|
4
English
Notes
• No USB device comes with this unit. You need to
purchase a commercially available USB device. For
the types of available USB devices, refer to <About
USB device> (page 10).
• If you experience problems during installation,
consult your Kenwood dealer.
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off
with a cloth moistened with neutral cleaner, then
wipe it again with a clean soft dry cloth.
• When you purchase optional accessories, check
with your Kenwood dealer to make sure that they
work with your model and in your area.
• Characters that conform to ISO 8859-1 can be
displayed. (DPX701U only)
•
Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth
or using a volatile liquid such as thinner or alcohol may
scratch the surface or erase characters.
• Characters that conform to ISO 8859-5 or ISO
8859-1 can be displayed. Refer to <Selecting
Russian Characters> (page 41). (Russian sales area
of DPX701U)
• The characters which can be displayed by this
unit are A-Z 0-9 @ " ‘ ` % & * + – = , . / \ < > [ ] ( ) : ;
^ - { } | ~ . (DPX501U only)
Before using this unit for the first time
This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the
<Demonstration mode Setting> (page 44).
• The RDS feature won’t work where the service is
not supported by any broadcasting station.
• There are places in this manual where lit
About DAB Tuner control
Refer to A group on the Instruction manual of DAB
Tuner KTC-9090DAB (optional accessory) for the
control method of DAB Tuner function.
However, the following control methods of the
function for this unit may be different from the
Instruction manual; therefore, refer to the following
supplemental instruction.
indicators are described; however, the only time
an indicator will light is in the following settings.
When Indicator is selected as mentioned in <Text
Display Switching> (page 18). (DPX701U only)
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on
the display on the actual equipment, and some
of the illustrations on the display may represent
something impossible in actual operation.
<Auto Ensemble Memory Entry>
1. Select the preset band for Auto Ensemble
Memory Entry.
2. Press the [AME] button for at least 2 seconds.
Open Auto Ensemble Memory Entry.
After storing in the memory finishes, the
number of the pre-set buttons and the
ensemble label are displayed.
<Searching by programme type and language>
and <Languages to be displayed> in
<Programme Type (PTY) Function>
At the operation to press [DISP] button, use [TI]
button instead.
How to reset your unit
• If the unit fails to operate properly, press the Reset
button. The unit returns to factory settings when
the Reset button is pressed.
• Remove the USB device before pressing the Reset
button. Pressing the Reset button with the USB
device installed can damage the data contained
in the USB device. For how to remove the USB
device, refer to <Playing USB device> (page 28).
• Press the Reset button if the disc auto changer
fails to operate correctly. Normal operation should
be restored.
Reset button
|
English
5
Notes
This Product is not installed by the manufacturer
of a vehicle on the production line, nor by the
professional importer of a vehicle into an EU
Member State.
About "Media Manager" of PC application
attached to DPX701U/DPX501U
• "Media Manager" is recorded in the CD-ROM
attached to this unit.
• Refer to the attached installation manual for the
installation method of "Media Manager".
• Refer to the user’s manual in the installation
CD-ROM and Help of "Media Manager" for the
operation method of "Media Manager".
• The unit can play CD/ USB device (hereafter called
"ACDrive media") created by "Media Manager".
• Refer to the following site for updated information
of "Media Manager".
Information on Disposal of Old Electrical
and Electronic Equipment (applicable for
EU countries that have adopted separate
waste collection systems)
Products with the symbol (crossed-out
wheeled bin) cannot be disposed as
household waste.
Old electrical and electronic equipment
should be recycled at a facility capable
of handling these items and their
waste byproducts. Contact your local
authority for details in locating a
recycle facility nearest to you. Proper
recycling and waste disposal will help
conserve resources whilst preventing
detrimental effects on our health and the
environment.
• Contact Kenwood for the function and operation
of the "Media Manager".
• "Media Manager" is a product of PhatNoise.
The marking of products using lasers
(Except for some areas)
The label is attached to the chassis/case and says
that the component uses laser beams that have
been classified as Class 1. This means that the unit
is utilizing laser beams that are of a weaker class.
There is no danger of hazardous radiation outside
the unit.
|
6
English
About CDs
Handling CDs
• Do not touch the recording surface of the CD.
Removing CDs
When removing CDs from this unit, pull them out
horizontally.
CDs that cannot be used
• CDs that are not round cannot be used.
• CD-R and CD-RW are easier to damage than a
normal music CD. Use a CD-R or a CD-RW after
reading the caution items on the package etc.
• Do not stick tape etc. on the CD, or use a CD with
tape stuck on it.
• CDs with coloring on the recording surface or CDs
that are dirty cannot be used.
• This unit can only play the CDs with
When using a new CD
If the CD center hole or outside rim has burrs,
use the CD only after removing the burrs with a
ballpoint pen, etc.
Burrs
Burrs
CD accessories
Do not use disc type accessories.
CD cleaning
Clean from the center of the disc and move
outward.
|
English
7
About AAC, MP3 and WMA
The playable AAC/MP3/WMA file (hereafter called
Audio file) and the media format has the following
limitation. The Audio file, which is not conforming
to the specification, may not play normally, or the
file and folder names may not display correctly.
Playable CD-R/RW format
• ISO 9660 Level 1/2
• Joliet
• Romeo
• Long file name.
Playable Audio file
Playable file format of USB device
• For the formats supported by USB devices, refer to
•
AAC, MP3, WMA
•
•
Attach the correct extension for the Audio file (AAC:
".M4A", MP3: ".MP3", WMA: ".WMA").
Do not attach the extensions to files other than the
Audio file. If the extension is attached, the file, which is
not the Audio file, will play and outputs a loud noise,
causing damage to the speaker.
The files with copy protection cannot be played.
Audio files cannot be played depending on the encoding
software setting, USB device type, and/or recording
conditions.
The unit may not be compatible with upgrade
of compression format standard and additional
specifications.
The maximum number of characters for
display (CD-R/RW)
File/Folder name: 128 characters
MP3 ID3 Tag/ WMA Contents property:
30 characters
AAC song information: 60 characters
•
•
•
•
•
File/Folder name is the number of the characters
including the extensions.
This unit can display the following versions of MP3 ID3
tag: version 1.0/ 1.1/ 2.2/ 2.3
•
•
For details on the formats used for USB devices
and restrictions, refer to http://www.kenwood.
mediamanager.jp/.
AAC ID3 Tag cannot be displayed.
Limitation of structure for the file and the
folder (CD-R/RW)
• Maximum number of directory levels: 8
• Maximum number of folders: 100
Playable AAC file
• ".m4a" file encoded by AAC-LC format.
Refer to http://www.kenwood.mediamanager.jp
for the details.
• Maximum number of files per folder: 4096
Playable MP3 file
About partition of the USB device
• While using the USB device, virtual folders are
created to control the partition in the USB device.
These folders appear in the first level (root)
directory as "#:". "#" is an alphabet to identify each
partition.
• Even when the USB device does not have
partition, "A:" folder is created, and audio files are
controlled inside this folder.
• MPEG 1/2 Audio Layer 3 file
• Transfer bit rate: 8-320 kbps
• Sampling frequency: 16, 22.05, 24, 32, 44.1, 48 kHz
Playable WMA file
• The file in accordance with Windows Media Audio
(Except for the file for Windows Media Player 9 or
after which applies the new functions)
• Transfer bit rate: 48-192 kbps
• Sampling frequency: 32, 44.1, 48 kHz
Playable Storage media
• CD-ROM, CD-R, CD-RW
• USB device
•
•
CD-RW discs which are quick formatted by the writing
software cannot be used.
When recording to the maximum CD-R/RW media
capacity at once, the writing software is set to "Disc at
once".
•
For details on the available USB devices, refer to <About
USB device> (page 10).
|
8
English
Playing order of the Audio file
• The Audio file plays in the order which is written
by CD writing software. You may be able to set
the playing order by writing the play sequence
numbers such as "01" to "99" at the beginning of
the file name.
• Audio files are played in the order the files are
written. You can specify the order of playback by
numbering files in a folder and writing them by
folder. (USB device)
Example
^
¡
:
Folder
F
CD
(1)
: A
Audio file
¡!
2
3
¡"
¡#
4
¡$
5
¡%
¡P
• Playing order
Playing order after ¡! play.
➡ ¡", ¡#, ¡$, ¡%...
• File search
Forward file search during ¡" play.
Push the Control knob towards [¢] ➡ ¡#
• Folder search
Forward folder search during ¡" play.
Push the Control knob towards [FM] ➡ 4, 5...
• File select
When the selection is set to file ¡%.
Push the Control knob towards [¢]
➡ ¡%...P, %...
• Folder select 1
When the selection is set to directory 4, and you
want to skip to the folder 2 at the same level.
Push the Control knob towards [4] ➡ 2
When the selection is set to directory 3, moves
the level up by folder select.
Push the Control knob towards [AM] ➡ 2
• Folder select 2
When the selection is set to directory 1, and you
want to skip to the folder 4.
Push the Control knob towards [¢] ➡ 3, 4...
|
English
9
About USB device
Notes on Use of the USB Device
This unit can play audio files stored in the flash
memory and digital audio player that have a USB
port (these devices are referred to as USB devices in
this document).
The following restrictions are placed on the types
and usage of available USB devices:
•
•
Install the USB device in the place where it will not
prevent you from driving your vehicle properly.
Do not leave the USB device in the vehicle for a long
time. It can deform or damage due to direct sunlight,
high temperature, etc.
Take backups of the audio files used with this unit.
The files can be erased depending on the operating
conditions of the USB device.
•
Available USB Devices
• USB devices belonging to the USB mass storage
class.
We shall have no compensation for any damage arising
out of erasure of the stored data.
•
Leave the cap on when not using an USB device.
• USB devices whose maximum current
consumption is 500 mA or less.
For the supported formats and USB device types,
About USB Device Operation
• USB device operation is the same as audio
file operation unless otherwise some notice is
indicated.
• USB source is recognized as CD source on the
connected unit.
•
USB Mass Storage Class:
USB devices that the PC can recognize as an external
storage without using any special driver or application
software.
•
•
Contact the sales agent as to whether your USB device
conforms to the USB mass storage class specs.
Using an unsupported USB device can result in abnormal
playback or display of the audio file.
Even if you use the USB device conforming to the above
specs, audio files cannot be played normally depending
on the type or condition of the USB device.
About the Connection of the USB Device
• Do not directly connect the USB device to the
USB connector on the panel. Connect it using a
cable
• When connecting the USB drive, usage of the
supplied USB cable is recommended.
Normal playback is not guaranteed when a cable
other than the USB compatible cable is used.
Connecting a cable whose total length is longer
than 5 m can result in abnormal playback.
•
You cannot connect a USB device via a USB hub.
|
10
English
accessory)
ly mode)
"AUX EXT"
"STANDBY"
ically turns full power OFF after 20
Standby mode in order to save the
power OFF can be set in <Power
42).
e
nob clockwise.
Select
Press the [
me
Source required
Tuner
USB device
nob counterclockwise.
CD
External disc (Optional accessory)
Auxiliary input
|
English
11
General features
Attenuator
Audio Control
Turning the volume down quickly.
1 Select the source to adjust
Press the [SRC] button.
Press the [ATT] button.
Each time you press the button, the Attenuator
turns ON and OFF.
When the Attenuator is ON, "ATT" is displayed.
2 Enter Audio Control mode
Press the [VOL] knob.
3 Select the Basic Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
System Q
4 Adjust the Basic Audio item
Turn the [VOL] knob.
Selecting the best sound setting preset for
different types of music.
Adjustment Item Display
Range
Rear Volume *1
"Rear Volume"/ 0 — 35
"R-VOL"
1 Select the source to set
Press the [SRC] button.
Subwoofer level*2,3,4 "Sub-W Level"/ –15 — +15
"SW L"
2 Select the Sound type
Press the [Q] button.
When you press the button once, the current
sound setting is displayed.
Each time you press the button, the sound
setting alternates.
Bass level*5
"Bass Level"/ –8 — +8
"BAS L"
"Middle Level"/ –8 — +8
"MID L"
"Treble Level"/
–8 — +8
"TRE L"
Middle level*5
Treble level*5
Balance
Fader*4
"Balance"/ "BAL" Left 15 — Right 15
"Fader"/ "FAD" Rear 15 — Front 15
Sound setting
User memory
Rock
Display
"USER"
"ROCK"
"POPS"
Exit Audio Control mode (Volume control mode)
Pops
*1 You can control this item when "2 ZONE"/ "2ZON" of
<Audio Setup> (page 14) is set to "ON".
*2 You can control this item when <Switching preout>
(page 37) is set to "SWPRE SW". (DPX501U only)
*3 You can control this item when <Subwoofer
Output> (page 15) is set to "SW ON".
*4 You can control this item when "2 ZONE"/ "2ZON" of
<Audio Setup> (page 14) is set to "OFF".
*5 You can adjust these items in detail. Refer to
<Adjusting the detail of Audio Control>(Page13).
*5 Source tone memory: Puts the set up value in the
memory per source. (Detail Audio item is included)
Easy
Top 40
Jazz
Natural
"EASY"
"TOP 40"
"JAZZ"
•
•
•
•
•
•
"NATURAL"
•
•
User memory: The values set on the <Audio Control>
(page 12).
Change each setting value with the <Speaker
Setting> (page 14).
First, select the speaker type with the Speaker setting.
5 Exit Audio Control mode
Press any button.
Press a button other than the [VOL] knob and
[ATT] button.
|
12
English
Adjusting the detail of Audio
Control
•
•
When you set the Bass Extend to ON, low frequency
response is extended by 20%.
You can exit the Audio Control mode at anytime
by pressing any button except for [VOL] and [ATT]
buttons.
Among the Basic Audio items, you can adjust the
Bass level, Middle level, and Treble level in detail.
1 Select the Basic Audio item
Select the desired item to be set in detail from
followings;
• Bass level
• Middle level
• Treble level
For how to select Basic Audio items, see <Audio
Control> (page 12).
2 Enter Detail adjustment mode of Audio
Control
Press the [VOL] knob for at least 1 second.
3 Select the Detail Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4 Adjust the Detail Audio item
Turn the [VOL] knob.
Bass level
Adjustment Item
Bass Center Frequency "Bass FRQ"/ 40/50/60/70/80/100/
"BAS F" 120/150 Hz
Display
Range
Bass Q Factor
"Bass QFactor"/1.00/1.25/1.50/2.00
"BAS Q"
Bass Extend
"Bass EXT"/ OFF/ON
"B EX"
Middle level
Adjustment Item
Display
Range
Middle Center Frequency "Middle FRQ"/ 0.5/1.0/1.5/2.0 kHz
"MID F"
Middle Q Factor
"Middle
QFactor"/
"MID Q"
1.00/2.00
Treble level
Adjustment Item
Display
Range
Treble Center Frequency "Treble FRQ"/ 10.0/12.5/15.0/17.5 kHz
"TRE"
5 Exit the Detail Audio Control mode
Press the [VOL] knob for at least 1 second.
|
English
13
General features
- Adjust the volume of Rear channel by <Audio
Control> (page 12).
- The Audio Control has no effect on sub source.
You can use the Dual Zone System with the internal
auxiliary input.
Audio Setup
Setting the Sound system, such as Cross over
Network.
•
1 Select the source to adjust
5 Exit Audio Setup mode
Press the [VOL] knob for at least 1 second.
Press the [SRC] button.
2 Enter Audio Setup mode
Press the [VOL] knob for at least 1 second.
3 Select the Audio Setup item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
Speaker Setting
Fine-tuning so that the System Q value is optimal
when setting the speaker type.
4 Setup the Audio item
1 Enter Standby
Turn the [VOL] knob.
Press the [SRC] button.
Select the "STANDBY" display.
Adjustment Item Display
Front High Pass Filter*2 "HPF-F Fc"/ Through/40/60/80/100/120/
"HPF" 150/180/220 Hz
Rear High Pass Filter*2 "HPF-R Fc"/ Through/40/60/80/100/120/
Range
2 Enter Speaker Setting mode
Press the [VOL] knob.
"SP SEL"/ "SP" is displayed.
"HPR"
"LPF-SW"/
"LPF"
150/180/220 Hz
50/60/80/100/120/
Through Hz
3 Select the Speaker type
Turn the [VOL] knob.
Each time you turn the knob, the setting
alternates between the settings shown in the
table below.
Low Pass Filter*1,2
Subwoofer Phase*1,2,3 "SW Phase"/ Reverse (180°)/ Normal (0°)
"PHAS"
Volume offset
"Vol-Offset"/ –8 —
"V-OFF"
0
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
Display
"OFF"/ "SP OFF"
"5/4 inch"/ "SP 5/4"
"6x9/6 inch"/ "SP 6*9/6"
"O.E.M."/ "SP OEM"
Loudness
"LOUD"
OFF/ON
OFF/ON
Dual Zone System
"2 ZONE"/
"2ZON"
•
•
•
•
•
•
•
Volume offset: Sets each source’s volume as a
difference from the basic volume.
Loudness: Compensates for low and high tones
during low volume.
*1 You can control this item when <Switching preout>
(page 37) is set to "SWPRE SW". (DPX501U only)
*1 You can control this item when <Subwoofer
Output> (page 15) is set to "SW ON".
*2 You can control this item when "2 ZONE"/ "2ZON" of
<Audio Setup> (page 14) is set to "OFF".
*3 You can control this item when Low Pass Filter is not
set to Through.
4 Exit Speaker Setting mode
Press the [VOL] knob.
Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
- Set up the channel of sub source by <Dual Zone
System Setting> (page 37).
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by [VOL] knob.
|
14
English
Subwoofer Output
Turning the Subwoofer output ON or OFF.
Push the Control knob toward [AM] for at
least 2 seconds.
Each time you push the knob, Subwoofer output
switches ON and OFF.
When it is ON, "SW ON" is displayed.
•
•
You can control this function when <Switching
preout> (page 37) is set to "SWPRE SW". (DPX501U
only)
You can control this function when "2 ZONE" of
<Audio Setup> (page 14) is set to "OFF".
TEL Mute
The audio system automatically mutes when a
call comes in.
When a call comes in
"CALL" is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio
system comes back ON.
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio
system comes back ON.
•
To use the TEL Mute feature, you need to hook up
the MUTE wire to your telephone using a commercial
telephone accessory. Refer to <Connecting Wires to
Terminals> (page 49).
|
English
15
General features
Function of the DPX501U
Function of the DPX701U
Switching Display
Display Type Selection
Changing the information displayed.
Changing the display mode.
Press the [DISP] button.
Press the [DISP] button.
Each time the button is pressed, the display
switches as shown below.
Each time you press the button, the display
mode alternates between the display modes
shown in the table below.
In Tuner source
Display Mode Display
Information
Program Service name or Frequency "FREQ/PS"
(FM)
Display
Display Type A
1
Radio text, Program Service name or "R-TEXT"
Frequency (FM)
Display Type B
1
2
Frequency (MW, LW)
Clock
"FREQ"
"CLOCK"
In CD & External disc source
Display Type C
3
3
3
4
5
6
Information
Disc title
Track title
Track number & Play time
Clock
Display
"D-TITLE"*
"T-TITLE"*
"P-TIME"
"CLOCK"
Display Type D
4
5
6
7
In Audio file source
Information
Display
"TITLE"*
"ALBUM"*
"FOLDER "
"FILE "
1 Graphic display part
2 Text display part
Song title & Artist name
Album name & Artist name
Folder name
File name
Track number & Play time
Clock
3 Text icon display part
4 Upper text display part
5 Middle text display part
6 Lower text display part
7 Source icon display part
"P-TIME"
"CLOCK"
In Standby/ Auxiliary input source
•
•
The indicator is displayed when the display type is set
to Display Type C or Display Type D.
To change the information by the Display Type, refer
to the page on the following table for the methods to
alternate by the Display Type.
Information
Source name
Clock
Display
"SRC NAME"
"CLOCK"
Display Type
Graphic 1
Text 2
A
B
C
—
—
19
20
20
D
—
—
19
20
20
17
17
18
—
—
—
•
•
•
* If the contents of the information cannot be
—
—
—
—
displayed, Play time or Frequency is displayed.
Track number at Audio file displays the last 3 digits
when it exceeds 1000 songs.
When you select the clock display, the display setting
of each source will be changed to the clock display.
Upper 4
Middle 5
Lower 6
Switching between graphic display part and
text display part when in Display Type B
mode.
Press the [DISP] button.
|
16
English
Function of the DPX701U
Display Type A/ Display Type B
Function of the DPX701U
Display Type A/ Display Type B
Graphic part Display Switching
Wallpaper selecting
Changing the graphic Display.
Selecting a wallpaper to display when Display
Type is set to Display Type A/ Display Type B.
1 Select the display Type
Press the [DISP] button.
Select the Display Type A/ Display Type B.
1 Select the wallpaper display
Refer to <Graphic part Display Switching> (page
17).
2 Enter graphic display select mode
Press the [DISP] button for at least 1 second.
Display Type A : Press the [DISP] button for at
least 1 second.
Display Type B : After pressing the [DISP]
button for more than 1 second to text
selection mode. Press the [DISP] button
again.
2 Select the wallpaper
Display the wallpapers one after another
Press the Control knob.
Each time you press the button, the Wallpaper
scan is turned ON and OFF.
When scan is ON, "SCAN" is displayed.
When scan is ON, each wallpaper is displayed
every several seconds.
3 Select the graphic part display
Push the Control knob towards [4] or
[¢].
Each time you push the knob, the graphic display
alternates between the displays shown in the
table below.
Select wallpaper manually
1 Turn the wallpaper scan OFF.
Press the Control knob.
Each time you press the button, the Wallpaper
scan is turned ON and OFF.
Graphic display
Movie 1
Movie 2
2 Select the wallpaper.
Push the Control knob towards [FM] or [AM].
Each time you push the knob, the Wallpaper
changes.
Wallpaper
3 Exit Display Control mode
Press the [DISP] button.
4 Exit graphic display select mode
Press the [DISP] button.
•
The setting of this function is available while Display
Type A/ Display Type B is selected for the Display
mode.
|
English
17
General features
Function of the DPX701U
Display Type B
4 Exit text select mode
Press the [DISP] button for at least 1 second.
Text Selection for Display
Selecting the text display.
•
•
•
* If the contents of the information cannot be
displayed, Play time or Frequency is displayed.
When LX-AMP is connected, the item setup by the
Display mode of LX-AMP is displayed.
Track number at Audio file displays the last 3 digits
when the track number exceeds 1000 songs.
1 Select the display Type
Press the [DISP] button.
Select the Display Type B.
2 Enter text select mode
Press the [DISP] button for at least 1 second.
3 Select the text
Push the Control knob towards [4] or
[¢].
In Tuner source
Function of the DPX701U
Display Type C/ Display Type D
Information
Program Service name (FM)
Display
"Frequency/PS"*
Text Display Switching
Radio text or Program Service name (FM) "Radio Text"*
Changing the text display.
Frequency (MW, LW)
Clock
Date
"Frequency"
"Clock"
1 Select the display Type
Press the [DISP] button.
"Date"
Select the Display Type C/Display Type D.
In CD & External disc source
2 Enter text select mode
Information
Disc title
Display
"Disc Title"*
Press the [DISP] button for at least 1 second.
3 Select the text display part
Push the Control knob towards [FM] or [AM].
The cursor ( ) moves to the selected text display
part.
Track title
"Track Title"*
"P-Time"
"DNPS"
Track number & Play time
Disc name
Clock
"Clock"
Date
"Date"
Select the text
Push the Control knob towards [4] or
In Audio file source
[¢].
Refer to the table described later for setting
items.
Information
Song title & Artist name
Album name & Artist name
Folder name
File name
Play time & File number
Clock
Display
"Title/Artist"*
"Album/Artist"*
"Folder Name"
"File Name"
"P-Time"
4 Exit text select mode
Press the [DISP] button.
•
Same information cannot be displayed in Upper text
display part, Middle text display part and Lower text
display part. However, the blank display is able to have
multiple selections.
"Clock"
"Date"
Date
In Standby/ Auxiliary input source
•
•
Track number at Audio file displays the last 3 digits
when the track number exceeds 1000 songs.
When LX-AMP is connected, the item setup by the
Display mode of LX-AMP is displayed.
Information
Source name
Clock
Display
"Source Name"
"Clock"
Date
"Date"
|
18
English
The text display in the Upper text display
part
In Tuner source
Information
Display
Program Service name (FM)
Radio text or Program Service name (FM)
Frequency (MW, LW)
Clock
Date
"Frequency/PS"*
"Radio Text"*
"Frequency"
"Clock"
"Date"
In CD & External disc source
Information
Disc title
Track title
Track number & Play time
Disc name
Clock
Display
"Disc Title"*
"Track Title"*
"P-Time"
"DNPS"
"Clock"
Date
"Date"
In Audio file source
Information
Song title & Artist name
Album name & Artist name
Folder name
File name
Play time & File number
Clock
Display
"Title/Artist"*
"Album/Artist"*
"Folder Name"
"File Name"
"P-Time"
"Clock"
Date
"Date"
In Standby/ Auxiliary input source
Information
Source name
Clock
Display
"Source Name"
"Clock"
Date
"Date"
•
* If the contents of the information cannot be
displayed, Play time or Frequency is displayed.
|
English
19
General features
The text display in the Middle text display
part
The text display in the Lower text display
part
In Tuner source
In Tuner source
Information
Clock
Date
Display
"Clock"
"Date"
Information
Indicator
Clock
Display
"Status"
"Clock"
Blank
"Blank"
Date
"Date"
Radio text (FM)
"Radio Text"*
Blank
"Blank"
Radio text (FM)
"Radio Text"*
In CD & External disc source
In CD & External disc source
Information
Clock
Date
Display
"Clock"
"Date"
Information
Indicator
Clock
Display
"Status"
"Clock"
Blank
"Blank"
Disc title
Track title
Disc name
"Disc Title"*
"Track Title"*
"DNPS"
Date
Blank
Disc title
Track title
Disc name
"Date"
"Blank"
"Disc Title"*
"Track Title"*
"DNPS"
In Audio file source
Information
Clock
Display
"Clock"
In Audio file source
Date
Blank
"Date"
"Blank"
Information
Indicator
Display
"Status"
Song title & Artist name
Album name & Artist name
Folder name
File name
"Title/Artist"*
"Album/Artist"*
"Folder Name"
"File Name"
Clock
Date
Blank
"Clock"
"Date"
"Blank"
"Title/Artist"*
"Album/Artist"*
"Folder Name"
"File Name"
Song title & Artist name
Album name & Artist name
Folder name
File name
In Standby/ Auxiliary input source
Information
Clock
Date
Display
"Clock"
"Date"
"Blank"
In Standby/ Auxiliary input source
Blank
Information
Indicator
Clock
Date
Blank
Display
"Status"
"Clock"
"Date"
•
* If the contents of the information cannot be
displayed, Kenwood Logo is displayed.
"Blank"
•
* If the contents of the information cannot be
displayed, indicator is displayed.
|
20
English
Function of the DPX701U
Display Type B/ Display Type C/ Display Type D
Font Color Select
Selecting the display font color.
1 Enter text select mode
Display type B : Refer to <Text Selection for
Display> (page 18).
Display type C/D : Refer to <Text Display
Switching> (page 18).
2 Switch from text selection to Font Color
selection
Press the Control knob.
3 Select the text display part
Select the row (Display Type C/ Display Type
D only)
Push the Control knob towards [FM] or [AM].
The cursor ( ) moves to the selected text display
part.
Select the Font Color
Push the Control knob towards [4] or
[¢].
4 Exit Font Color select mode
Press the Control knob.
•
•
When you selected the Display Type B display, select
an easy viewable font color.
The "Status" item of Display type C/D can be set;
however, the actual display color does not change.
|
English
21
Accessory of the DPX701U
Function of remote control
Tuning
Selecting the station.
Direct Access Tuning
1 Select tuner source
Press the [SRC] button.
Select the "TUNER" display.
Entering the frequency and tuning.
1 Select the band
Press the [FM] or [AM] button.
2 Select the band
2 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
Push the Control knob towards [FM] or [AM].
Each time you push the knob toward [FM], it
switches between the FM1, FM2, and FM3 bands.
"– – – –" is displayed.
3 Tune up or down band
Push the Control knob towards [4] or
[¢].
3 Enter the frequency
Press the number buttons on the remote
control.
Example:
•
During reception of stereo stations the "ST" indicator
is ON.
Desired frequency
92.1 MHz (FM)
Press button
[0], [9], [2], [1]
[0], [8], [1], [0]
810 kHz (AM)
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
|
22
English
Station Preset Memory
Preset Tuning
Putting a station in the memory.
Recalling the stations in the memory.
1 Select the band
Push the Control knob towards [FM] or [AM].
1 Select the band
Push the Control knob towards [FM] or [AM].
2 Select the frequency to put in the memory
Push the Control knob towards [4] or
[¢].
2 Recall the station
Press the desired [1] — [6] button.
3 Put the frequency in the memory
Press the desired [1] — [6] button for at least
2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the
memory on each [1] — [6] button.
Auto Memory Entry
Putting stations with good reception in the
memory automatically.
1 Select the band for Auto Memory Entry
Push the Control knob towards [FM] or [AM].
2 Open Auto Memory Entry
Press the [AME] button for at least 2 seconds.
When 6 stations that can be received are put in
the memory, Auto Memory Entry closes.
•
•
When the <AF (Alternative Frequency)> (page 39) is
ON, only RDS stations are put in the memory.
When Auto Memory Entry is done in the FM2 band,
the RDS stations preset in the FM1 band are not put in
the memory.
Likewise, when Auto Memory Entry is done in the FM3
band, RDS stations preset in FM1 or FM2 are not put
in the memory.
|
English
23
RDS features
Control knob
TI
1 - 6
Program Service name
Band display
Radio text
DPX701U
DPX501U
RDS indicator
PTY indicator
TI indicator
Radio text
Receiving other traffic information stations
Push the Control knob towards [4] or
[¢].
Traffic Information
Changing to traffic information automatically
when a traffic bulletin starts even when you are
not listening to the radio.
•
Traffic information can be switched when it is on the
Tuner Source. However, you cannot switch the Traffic
information during reception of the Traffic bulletin
switched from the source other than the Tuner.
Press the [TI] button.
Each time you press the button, the Traffic
information function turns ON and OFF.
When traffic information is ON, "TI" indicator is
ON. (DPX501U only)
When a traffic information station is not being
received the "TI" indicator blinks.
When a traffic bulletin starts, "Traffic INFO"/
"TRAFFIC" is displayed and the audio changes to
traffic information.
Radio Text Scroll
Scrolling the displayed radio text.
•
•
During reception of an AM station when the Traffic
Information function is turned ON, the frequency
changes to an FM station.
During reception of traffic information the adjusted
volume is automatically remembered, and the next
time the audio changes to traffic information, the
volume automatically becomes the remembered
volume.
Push the Control knob toward [FM] for at
least 2 seconds.
•
When the <Display Illumination Control> (page 37) is
set to OFF, the display may black out while scrolling.
|
24
English
PTY (Program Type)
30.
31.
Folk Music
Documentary
"Folk Music"
"Documentary"
"FOLK M"
"DOCUMENT"
Selecting the Program Type and searching for a
station.
•
Speech and Music include the Program type shown
below.
Music: No.12 — 17, 26 — 30
1 Enter PTY mode
Press the Control knob.
"PTY Select" is displayed. (DPX701U only)
During PTY mode the "PTY" indicator is ON.
(DPX501U only)
Speech: No.3 — 11, 18 — 25, 31
•
•
You can put the Program Type in the [1] — [6] button
memory and for quick recall. Refer to the <Program
Type preset> (page 25).
You can change the display language. Refer to
<Changing Language for PTY Function> (page 26).
•
This function cannot be used during a traffic bulletin
or AM reception.
3 Search for the selected Program Type
station
Push the Control knob towards [4] or
[¢].
When you want to search for other stations, push
[4] or [¢] of the Control knob again.
2 Select the Program Type
Push the Control knob towards [FM] or [AM].
Each time you push the knob, the Program Type
alternates between the program types shown in
the table below.
No. Program Type
Display
DPX701U
"All Speech"
"All Music"
"News"
"Current Affairs" "AFFAIRS"
"Information"
"Sport"
DPX501U
"SPEECH"
"MUSIC"
"NEWS"
•
When the selected Program Type is not found, "NO
PTY" is displayed. Select another Program Type.
1.
2.
3.
4.
5.
6.
Speech
Music
News
Current Affairs
Information
Sport
4 Exit PTY mode
Press the Control knob.
"INFO"
"SPORT"
7.
8.
9.
Education
Drama
Culture
"Education"
"Drama"
"Cultures"
"Science"
"EDUCATE"
"DRAMA"
"CULTURE"
"SCIENCE"
Program Type preset
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
Science
Varied
"Varied Speech" "VARIED"
Putting the Program Type in the Preset button
memory and quick recall.
Pop Music
Rock Music
Easy Listening Music
Light Classical
Serious Classical
Other Music
Weather
"Pop Music"
"Rock Music"
"POP M"
"ROCK M"
Presetting the Program Type
"Easy Listening M" "EASY M"
"Light Classic M" "LIGHT M"
"Serious Classics" "CLASSICS"
1 Select the Program Type to preset
Refer to <PTY (Program Type)> (page 25).
"Other Music"
"Weather & Metr" "WEATHER"
"Finance" "FINANCE"
"Children's Prog" "CHILDREN"
"OTHER M"
2 Preset the Program Type
Press the desired [1] — [6] button for at least
2 seconds.
Finance
Children’s programs
Social Affairs
Religion
Phone In
Travel
"Social Affairs"
"Religion"
"Phone In"
"SOCIAL"
"RELIGION"
"PHONE IN"
Recalling the preset Program Type
1 Enter PTY mode
Refer to <PTY (Program Type)> (page 25).
"Travel & Touring" "TRAVEL"
"Leisure & Hobby" "LEISURE"
Leisure
2 Recall the Program Type
Press the desired [1] — [6] button.
Jazz Music
Country Music
National Music
Oldies Music
"Jazz Music"
"JAZZ"
"Country Music" "COUNTRY"
"National Music" "NATION M"
"Oldies Music"
"OLDIES"
|
English
25
RDS features
Changing Language for PTY
Function
Selecting the Program Type display language.
1 Enter PTY mode
Refer to <PTY (Program Type)> (page 25).
2 Enter Changing Language mode
Press the [TI] button.
3 Select the language
Push the Control knob towards [FM] or [AM].
Each time you push the knob, the language
alternates between the languages shown in the
table below.
DPX701U
Language
English
Spanish
Display
"English"
"Spanish"
"French"
French
Dutch
"Dutch"
Norwegian
Portuguese
Swedish
German
"Norwegian"
"Portuguese"
"Swedish"
"German"
DPX501U
Language
English
French
Swedish
German
Display
"ENGLISH"
"FRENCH"
"SWEDISH"
"GERMAN"
4 Exit Changing Language mode
Press the [TI] button.
|
26
English
CD/USB device/Audio file/External disc control features
Control knob
SRC
S.MODE SCAN RDM/ REP F.SEL M.RDM
A.RDM/3
Track number
Play time
Track number
Play time
DPX701U
DPX501U
Disc number
IN indicator
IN indicator
Play mode
Playing CD & Audio file
When a disc is inserted
Press the [SRC] button.
Select the "Compact Disc"/ "CD" display.
•
When a CD is inserted, the "IN" indicator is ON.
Pause and play
Press the Control knob.
Each time you press the knob, the audio pauses
or plays.
Eject the CD
Press the [0] button.
•
You can cancel the announcement when selecting
the folder by <Voice Index> (page 43) during the play
of the ACDrive media.
|
English
27
CD/USB device/Audio file/External disc control features
Playing USB device
Playing External Disc
Playing discs set in the optional accessory disc
player connected to this unit.
Playing USB device
1 Select a source other than the USB device.
Press the [SRC] button.
2 Select USB source
Press the [SRC] button.
Select the "USB" display.
Select the display for the disc player you want.
Display examples:
Display
"CD Changer"/ "CD CH"
"MD Changer"/ "MD CH"
Disc player
CD changer
MD changer
•
•
Refer to <About AAC, MP3 and WMA> (page 8) for the
Audio file you can play.
For the types of available USB devices and how to
connect USB devices, refer to <About USB device>
Pause and play
68 139.5 w051 143.3 c P1r8 selected as a source
(page 10).
can damage the data stored in the USB device.
•
After you stopped playing a file contained in the USB
device, you can restart playing the file from the point
where you stopped its playback.
Even after removing the USB device, you can restart
playing the file from the point where you stopped
its playback as long as the files contained in the USB
device are all the same.
•
•
•
Be sure to insert the USB device connector as far as it
will go.
You can play the disc (ACDrive media) made by Media
Manager by the same operation.
You can cancel the announcement when selecting
the folder by <Voice Index> (page 43) during the the
ACDrive media.
Pause and play
Press the Control knob.
Each time you press the knob, the audio pauses
or plays.
Removing the USB Device
1 Select a source other than the USB device
Press the [SRC] button.
2 Remove the USB device.
•
Removing the USB device with it selected as a source
can damage the data stored in the USB device.
•
You can remove the USB device safely with the unit
power turned off.
|
28
English
Accessory of the DPX701U
Track/File Search
Function of disc changers with remote control
Searching for a song on the disc or in the Audio
file folder.
Direct Disc Search
Doing Disc Search by entering the disc number.
Push the Control knob towards [4] or
[¢].
1 Enter the disc number
Press the number buttons on the remote
control.
2 Do Disc Search
Function of disc changer/ Audio file
Press the [+] or [–] button.
Disc Search/Folder Search
Cancelling Direct Disc Search
Selecting the disc set in the Disc changer or the
folder recorded on the Audio file media.
Press the [38] button.
Push the Control knob towards [FM] or [AM].
•
Input "0" to select disc 10.
Accessory of the DPX701U
Function of remote control
Track/File/Disc/Folder Repeat
Replaying the song, disc in the Disc changer or
Audio file folder you are listening to.
Direct Track/File Search
Doing Track/File Search by entering the track/file
number.
Press the [REP] button.
Each time you press the button, the Repeat Play
alternates between the modes shown in the
tables below.
1 Enter the track/file number
Press the number buttons on the remote
control.
In CD & External disc source
Repeat play
Track Repeat
Disc Repeat (In Disc Changer)
OFF
Display
•
You can select Direct File Search up to 999.
"Track Repeat ON"/ "TRAC REP"
"Disc Repeat ON"/ "DISC REP"
"Repeat OFF"/ "REP OFF"
2 Do Track/File Search
Press the [4] or [¢] button.
Cancelling Direct Track/File Search
Press the [38] button.
In Audio file source
Repeat play
File Repeat
Folder Repeat
OFF
Display
"File Repeat ON"/ "FILE REP"
"Folder Repeat ON"/ "FOLD REP"
"Repeat OFF"/ "REP OFF"
|
English
29
CD/USB device/Audio file/External disc control features
Function of Audio file
Scan Play
All Random Play
Playing the first part of each song on the disc
or Audio file folder you are listening to and
searching for the song you want to hear.
Playing randomly from all of the Audio files
recorded in the media.
Press the [A.RDM] button for at least 1
second.
When the random mode is ON, "All Random ON"/
"ALL RDM" is displayed.
1 Start Scan Play
Press the [SCAN] button.
"Scan ON"/ "Track Scan ON"/ "File Scan ON"/
"SCAN ON"/ "TRAC SCN"/ "FILE SCN" is displayed.
Cancelling the All Random Play
Press the [A.RDM] button.
2 Release it when the song you want to listen
to is played
Press the [SCAN] button.
•
When you push the Control knob toward [¢], the
next random song starts.
Random Play
Playing all the songs on the disc in random order.
Press the [RDM] button.
Each time you press the button, Random Play
turns ON or OFF.
When the Random mode is ON, "Random ON"/
"Disc Random ON"/ "Folder RDM ON"/ "DISC
RDM"/ "FOLD RDM" is displayed.
Function of Audio file
Select mode
Quickly selecting the file or folder you want to
hear.
1 Select the Select mode
Press the [FSEL] button.
•
When you push the Control knob toward [¢], the
next random song starts.
Display
Select mode
"FILE SELECT"/
Refer to <File Select mode> (page 31).
"FILE SEL"*1
"FOLDER SELECT1"/ Refer to <Folder Select 1 mode> (page 32).
"FOLDER SELECT"/
"FLD SEL1"/ "FLD SEL"
Function of disc changer
"FOLDER SELECT2"/ Refer to <Folder Select 2 mode> (page 32).
"FLD SEL2" *2
Magazine Random Play
Exit the Select mode
Play the songs on all the discs in the disc changer
in random order.
•
•
•
The Select mode does not function when <All
Random Play> (page 30) is ON.
Press the [M.RDM] button.
Each time you press the button, the Magazine
Random Play turns ON or OFF.
When the Magazine Random mode is ON,
"Magazine RDM ON"/ "MGZN RDM" is displayed.
*1 You cannot operate this function when <Random
Play> (page 30) is set to "ON".
*2 You cannot operate this function when <Switching
the Play mode> (page 33) is set to other than
"Folder Mode"/ "FOLDER" while playing ACDrive
media.
•
When you push the Control knob toward [¢], the
next random song starts.
2 Select the file/ folder
Refer to the explanation of the procedure
performed in each select mode.
|
30
English
Scrolling the file/ folder name display
Push the Control knob toward [FM] for at
least 2 seconds.
•
•
You can cancel the announcement when selecting
the folder by <Voice Index> (page 43) during the play
of the ACDrive media.
In the File Select mode, the <Voice Index> (page 43)
announcement is not made.
Function of Audio file
File Select mode
You can select an audio file in the folder currently
being played by file name.
1 Enter File Select mode
Press the [F.SEL] button.
Select the "FILE SELECT"/ "FILE SEL" display.
Refer to <Select mode> (page 30).
File name display
Displays the current file name.
File number display
Displays the number in the folder belonging to
the currently selected file.
Displays the current file name.
|
English
31
CD/USB device/Audio file/External disc control features
Function of Audio file
The Folder Select mode releases, and the Audio
file in the folder being displayed plays.
Folder Select 1 mode
Select the target folder by tracing the hierarchical
levels of folders. This is convenient when
managing audio files by folder.
Function of Audio file
1 Enter Folder Select 1 mode
Press the [F.SEL] button.
Select the "FOLDER SELECT1"/ "FLD SEL1"/
"FOLDER SELECT"/ "FLD SEL" display.
Refer to <Select mode> (page 30).
Folder name display
Folder Select 2 mode
Select the target folder within the folders
containing audio files. The folder which contains
playable audio files is only displayed.
1 Enter Folder Select 2 mode
Press the [F.SEL] button.
Select the "FOLDER SELECT2"/ "FLD SEL2"
display.
Displays the current folder name.
Refer to <Select mode> (page 30).
Folder name display
Displays the current folder name.
Folder number display
Displays the number in the folder belonging to
the currently selected folder.
Displays the current folder name.
Folder number display
Displays the number in the folder belonging to
the currently selected folder.
Displays the current folder name.
.
2 Select the folder level*
Push the Control knob towards [FM] or [AM].
With the [FM] button, you move 1 level down
and with the [AM] button, 1 level up.
Selecting a folder in the same level
Push the Control knob towards [4] or
[¢].
With the [4] of the Control knob, you move
to the previous folder, and with the [¢] of the
Control knob, to the next folder.
2 Select the folder
Push the Control knob towards [4] or
[¢].
Each time you push the knob, the folders
containing audio files are displayed one after
another.
Returning to the top level*
Press the [3] button.
Check the name of upper level folder
Push the Control knob towards [FM] or [AM].
With the [FM] button, the folder name in the
upper level is displayed.
With the [AM] button, the folder name in the
lower level is displayed.
•
* You cannot operate this function when <Switching
the Play mode> (page 33) is set to other than "Folder
Mode" while playing ACDrive media.
3 Decide the folder to play
Press the Control knob.
"^"/ " " is displayed while the upper level
folder is displayed.
|
32
English
3 Decide the folder to play
Press the Control knob.
The Folder Select mode releases, and the Audio
file in the folder being displayed plays.
•
•
This operation does not function when <All Random
Play> (page 30) is ON.
This function is available only when the Play mode is
set Genre, Artist, or Album.
Cancelling the Letter Seek
Press the [S.MODE] button.
Function of ACDrive media
2 Start the Letter Seek
Push the Control knob towards [4] or
[¢].
The initial of Genre name, Artist name, or Album
name is displayed and announced in order.
Switching the Play mode
Arrange the playing orders of the songs by
categories.
Press the [S.MODE] button.
Each time you press the button, the Play mode
alternates between the modes shown in the
table below.
•
•
The announcement of the initial can be canceled by
<Voice Index> (page 43).
When you push the Control knob to the reverse [4]
or [¢] during Letter Seek, the initial is displayed and
announced in the reversed order.
The Play mode indicator is ON. (DPX501U only)
Play mode
Category which is to be arranged
"PlayList Mode"/ "PLAYLIST" Play list order.
•
Once Letter Seek starts, it cannot be cancelled.
"Genre Mode"/ "GENRE"
"Artist Mode"/ "ARTIST"
"Album Mode"/ "ALBUM" By album.
By genre.
By artist.
3 Select the song to play
Press the Control knob when the initial of
the song you are searching is displayed and
announced.
"Folder Mode"/ "FOLDER" By the folder recorded in media
The selected initial group plays.
•
The category information of each song is the data
registered in Media Manager when ACDrive media is
being generated.
•
Letter seek can be performed for letters of the
alphabet (A-Z).
•
•
You can cancel the announcement made when the
mode is changed by <Voice Index> (page 43).
You can select the advancement of the Play mode
information by [AM] and [FM] knob.
Text/Title Scroll
Scrolling the displayed CD text, Audio file text, or
MD title.
Function of ACDrive media
Push the Control knob toward [FM] for at
least 2 seconds.
Letter Seek
You can search for the song, you want to play, by
selecting the initial of Genre name, Artist name,
or Album name.
•
When the <Display Illumination Control> (page 37) is
set to OFF, the display may black out while scrolling.
1 Enter the Letter Seek mode
Press the [S.MODE] button for at least 1
second.
|
English
33
Menu system
Control knob
MENU
SRC
Menu display
DPX701U
DPX501U
Menu display
You can continue by returning to step 2 and
setting other items.
Menu System
Setting beep sound during operation, etc.
functions.
The Menu system basic operation method is
4 Exit Menu mode
Press the [MENU] button.
explained here. The reference for the Menu items
and their setting content is after this operation
explanation.
•
When other items those applicable to the basic
operation method above are displayed, their setting
content chart is entered. (Normally the setting listed at
the top of the chart is the original setting.)
Also, the explanation for items that are not applicable
(<Manual Clock Adjustment> etc.) are entered step
by step.
Three menu items appear on the display. The menu
item displayed at the center is the one you can adjust.
(DPX701U only)
1 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
2 Select the menu item
•
Push the Control knob towards [FM] or [AM].
Example: When you want to set the beep sound
select the "Beep"/ "BEEP" display.
3 Set the menu item
Push the Control knob towards [4] or
[¢].
Example: When you select "Beep"/ "BEEP", each
time you push the knob it alternates
between "Beep : ON"/ "BEEP ON" or
"Beep : OFF"/ "BEEP OFF". Select 1 of
them as the setting.
|
34
English
In Standby mode
Resetting the Security Code function when
the audio unit is first used after removed
from the battery power source or the Reset
button is pressed
Security Code
Activating the Security Code disables the usage
of audio unit by someone else. Once the Security
Code is activated, the entry of authorized Security
Code is required to turn on the audio unit when
it is removed from the vehicle. Indication of this
Security Code activation prevents your precious
audio unit from stealing.
1 Turn the power ON.
2 Do the step 4 through 7 step operation, and
reenter the security code.
"Approved"/ "APPROVED" is displayed.
Now, you can use the unit.
•
If an incorrect code is entered, "Waiting"/ "WAITING" is
displayed, and the input prohibition periods shown in
the table below is generated.
After the input prohibition time lapses, "Security"/
"CODE" is displayed, and you can reenter the code.
•
•
Set the Security Code when the <Demonstration mode
Setting> (page 44) is set to OFF.
When you activate the Security Code function, it cannot
be released.
Note, your Security Code is the 4 digit number entered in
your "Car Audio Passport" in this package.
Number of times the
Input prohibited time
incorrect code was input
1 Enter Standby
1
2
3
4
—
5 minutes
1 hour
Press the [SRC] button.
Select the "STANDBY" display.
2 Enter Menu mode
24 hours
Press the [MENU] button for at least 1 second.
When "MENU" is displayed, "Security Set"/ "CODE
SET" is displayed.
3 Enter Security Code mode
Press the Control knob for at least 1 second.
When "Enter"/ "ENTER" is displayed, "Security
Set"/ "CODE" is also displayed.
In Standby mode
Touch Sensor Tone
4 Select the digits to enter
Push the Control knob towards [4] or
[¢].
Setting the operation check sound (beep sound)
ON/OFF.
Display
Setting
5 Select the Security Code numbers
Push the Control knob towards [FM] or [AM].
"Beep : ON"/ "BEEP ON"
"Beep : OFF"/ "BEEP OFF"
Beep is heard.
Beep canceled.
6 Repeat steps 4 and 5, and complete the
Security Code.
7 Confirm the Security Code
Press the Control knob for at least 3 seconds.
When "Re-Enter"/ "RE-ENTER" is displayed,
"Security Set"/ "CODE" is also displayed.
8 Do the step 4 through 7 step operation, and
reenter the security code.
"Approved"/ "APPROVED" is displayed.
The Security Code function activates.
•
If you enter a Code different from your Security Code,
you have to start over from step 4.
|
English
35
Menu system
In Standby mode
Function of the DPX701U
In Standby mode
Manual Clock Adjustment
Date Mode
Setting the date format.
•
You can do this adjustment when the <Synchronize
Clock> (page 36) is set as OFF.
1 Select Date Mode
Push the Control knob towards [FM] or [AM].
Select the "Date Mode" display.
1 Select Clock Adjustment mode
Push the Control knob towards [FM] or [AM].
Select the "Clock Adjust"/ "CLK ADJ" display.
2 Select the date format
Push the Control knob towards [4] or
[¢].
2 Enter Clock Adjust mode
Press the Control knob for at least 1 second.
The clock display blinks.
3 Exit Menu mode
Press the [MENU] button.
3 Adjust the hours
Push the Control knob towards [FM] or [AM].
Adjust the minutes
Push the Control knob towards [4] or
[¢].
In Standby mode
4 Exit Clock adjustment mode
Press the [MENU] button.
Synchronize Clock
Synchronizing the RDS station time data and this
unit’s clock.
Display
Setting
"SYNC : ON"/ "SYNC ON" Synchronizes the time.
"SYNC : OFF"/ "SYNC OFF" Adjust the time manually.
Function of the DPX701U
In Standby mode
Date Adjustment
•
It takes 3 to 4 minutes to synchronize the clock.
1 Select Date Adjust mode
Push the knob towards [FM] or [AM].
Select the "Date Adjust" display.
2 Enter Date Adjust mode
Press the Control knob for at least 1 second.
The date display blinks.
In Standby mode
Indirect Lighting
3 Selecting the item (day, month, or year) to
adjust
You can illuminate the area around the display
with soft indirect lighting.
Push the Control knob towards [4] or
Display
Setting
[¢].
"Lighting : ON"/ "LGHT ON" Turns indirect lighting on.
"Lighting : OFF"/ "LGHT OFF" Turns indirect lighting off.
The items that are blinking are items that you
can adjust.
4 Adjust each item
Push the Control knob towards [FM] or [AM].
5 Repeat step 3 and 4 operation and adjust the
date.
6 Exit Date adjustment mode
Press the [MENU] button.
|
36
English
Function of the DPX501U
In Standby mode
Display Illumination Control
This function turns off the display when you
perform no operation for 5 seconds. This function
is effective when you are driving at night.
Switching preout
Alternating the preout between the rear and
subwoofer. (With the subwoofer the sound
outputs without being effected by fader control.)
Display
Setting
"Display : ON"/
"DISP ON"
Keeps the display on.
Display
Setting
"SWPRE R"
"SWPRE SW"
Rear preout.
Subwoofer preout.
"Display : OFF"/
"DISP OFF"
Turns off the display when you perform no
operation for 5 seconds.
•
Set the Display Illumination Control when the
<Demonstration mode Setting> (page 44) is set to
OFF.
When the display is off, pressing any key will turn on
the display.
In Standby mode
•
•
Built-in Amp Setting
When the display is off, you cannot perform any
operation except for the following:
Controlling the built-in amplifier.
Turning OFF this control enhances the preout
quality.
•
•
•
•
•
Volume
Attenuator
Selecting the source
Ejecting the disc
Turning off the power
Display
Setting
"AMP : ON"/ "AMP ON"
The built-in amplifier activates.
"AMP : OFF"/ "AMP OFF" The built-in amplifier deactivates.
•
During function control, such as the Menu System, the
display stays on.
Other than Standby mode/
When the Dual Zone System is ON
Dual Zone System Setting
In Standby mode
Dimmer
Setting the Front channel and Rear channel
sound in the Dual Zone System.
Dimming this unit’s display automatically when
the vehicle light switch is turned ON.
Display
"Zone2 : Rear"/ Sub source (Auxiliary input source) is to be rear
"ZONE2 R" channel.
"Zone2 : Front"/ Sub source (Auxiliary input source) is to be front
"ZONE2 F" channel.
Setting
Display
"Dimmer : ON"/ "DIM ON"
"Dimmer : OFF"/ "DIM OFF"
Setting
The display dims.
The display doesn’t dim.
|
English
37
Menu system
Other than Standby mode
When LX AMP unit connecting
B.M.S. (Bass Management System)
AMP Control
Adjust the bass boost level of the external
amplifier using the main unit.
You can control the LX AMP connected to the
unit.
Display
Setting
1 Select AMP Control mode
"AMP Bass : Flat"/ "BMS FLT"Bass boost level is flat.
"AMP Bass : +6"/
"BMS +6"
"AMP Bass : +12"/
"BMS +12"
"AMP Bass : +18"/
"BMS +18"
Push the Control knob towards [FM] or [AM].
Select the "AMP Control"/ "AMP CTRL" display.
Bass boost level is low (+6dB).
2 Enter AMP Control mode
Press the Control knob for at least 1 second.
Bass boost level is mid (+12dB).
Bass boost level is high (+18dB).
3 Select the AMP Control item for adjustment
Push the Control knob towards [FM] or [AM].
•
•
Refer to the catalog or instruction manual for power
•
For the details on the AMP Control item, see the
Instruction manual attached to the LX AMP.
amplifiers that can be controlled from this unit.
For amplifiers, there are the models you can set from
Flat to +18 dB, and the models you can set from Flat
to +12 dB.
When an amplifier that can only be set to +12 is
connected to the unit, "AMP Bass : +18"/ "BMS +18"
will not work correctly even if it is selected.
4 Adjust the AMP Control item
Push the Control knob towards [4] or
[¢].
5 Exit AMP Control mode
Press the [MENU] button.
•
You cannot use the LX AMP operation during standby
mode.
Other than Standby mode
B.M.S. Frequency Offset
Setting the central frequency, boosted by B.M.S.
Display
Setting
"AMP FREQ : Normal"/ Boost with the normal central frequency.
"BMSF NML"
"AMP FREQ : Low"/
"BMSF LOW"
Drop the normal central frequency 20%.
|
38
English
In Tuner mode
News Bulletin with Timeout Setting
Local Seek
The tuner automatically changes when a news
bulletin starts even if the radio is not being
listened to. Also, you can set the time interval
when interruption is prohibited.
Only stations whose reception is good are
searched in auto seek tuning.
Display
Setting
"Local Seek : OFF"/
"LO.S OFF"
"Local Seek : ON"/
"LO.S ON"
The local seek function is OFF.
Display and Setting
"News : OFF"/ "NEWS OFF"
"News : 00min"/ "NEWS 00M"
The local seek function is ON.
"News : 90min"/ "NEWS 90M"
When you set "News : 00min"/ "NEWS 00M" —
"News : 90min"/ "NEWS 90M", the News Bulletin
Interrupt function is ON.
In Tuner mode
When the News Bulletin is ON, the "NEWS"
indicator is ON. (DPX501U only)
When the news bulletin starts, "NEWS" is
displayed, and the tuner changes to the news
bulletin.
Tuning Mode
Sets the tuning mode.
Tuning mode
Auto seek
Display
Operation
"Seek Mode Automatic search for a station
: Auto1"/
"AUTO 1"
.
•
If you choose the "News : 20min"/ "20MIN" setting,
further news bulletins will not be received for 20
minutes once the first news bulletin is received.
The news bulletin volume is the same level that was
set for <Traffic Information> (page 24).
This news bulletin function is only available if the
desired station sends PTY-code for news bulletin or
belongs to <Enhanced Other Network>-Network
sending PTY-code for news bulletin.
Preset station seek "Seek Mode Search in order of the stations
: Auto2"/
"AUTO 2"
in the Preset memory.
Manual
"Seek Mode Normal manual tuning control
: Manual"/
"MANUAL"
•
•
.
•
When the News Bulletin Interrupt function is ON, the
tuner changes to an FM station.
AF (Alternative Frequency)
When the reception is poor, automatically
alternate to another frequency broadcasting the
same program in the same RDS network with
better reception.
Display
Setting
"AF : ON"/ "AF ON"
The AF function is ON.
"AF : OFF"/ "AF OFF" The AF function is OFF.
When the AF function is ON, the "RDS" indicator
is ON.
•
When no other stations with stronger reception are
available for the same program in the RDS network,
you may hear the incoming broadcast in bits and
snatches. Turn OFF the AF function in such a case.
|
English
39
Menu system
Restricting RDS Region (Region
Restrict Function)
External Display Control
Changing the display of the External Display
connected to this unit.
You can choose whether or not to restrict the
RDS channels, received with the AF function for a
particular network, to a specific region.
Display
"DISP Out Select"/ "OEM DISP"
Display
"Regional : ON"/
"REG ON"
"Regional : OFF"/
"REG OFF"
Setting
Each time you push the knob towards [4] or
[¢], the display switches.
The Region Restrict Function is ON.
The Region Restrict Function is OFF.
•
If AF function is not restricted to the specified region
and network, the AF function sets up to search the
station with good reception in the same RDS network.
Function of the DPX701U
Disc Naming (DNPS)
Attaching a title to a CD.
1 Play the disc you want to attach a name to
Auto TP Seek
•
A title cannot be attached to MD or Audio file media.
When the TI function is ON and the reception
is poor while listening to a traffic information
station, another traffic information station
with better reception will be searched for
automatically.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3 Select Name set mode
Push the Control knob towards [FM] or [AM].
Select the "Name Set" display.
Display
Setting
"Auto TP Seek : ON"/ The Auto TP Seek Function is ON.
"ATPS ON"
"Auto TP Seek : OFF"/ The Auto TP Seek Function is OFF.
"ATPS OFF"
4 Enter Name set mode
Press the Control knob for at least 1 second.
5 Move the cursor to the enter character
position
Push the Control knob towards [4] or
[¢].
6 Select the character type
Press the Control knob.
Each time you press the knob, the character type
alternates between the types shown in the table
below.
In FM reception
Monaural Reception
You can reduce the noise when stereo broadcasts
are received as monaural.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
Display
Setting
The monaural reception is OFF.
"MONO : OFF"/
"MONO OFF"
"MONO : ON"/
"MONO ON"
The monaural reception is ON.
7 Select the characters
Push the Control knob towards [FM] or [AM].
|
40
English
5 Select the Auxiliary input display
Push the Control knob towards [4] or
•
You can enter characters by using a remote control
with a number button.
Example: If you enter "DANCE".
[¢].
Each time you push the knob, the display
alternates as listed below.
• "AUX"/ "AUX EXT"
• "DVD"
• "PORTABLE"
• "GAME"
Character
"D"
"A"
"N"
"C"
Button
[3]
[2]
[6]
[2]
Times pressed
1
1
2
3
2
• "VIDEO"
• "TV"
"E"
[3]
6 Exit Menu mode
Press the [MENU] button.
8 Repeat steps 5 through 7 and enter the name.
9 Exit Menu mode
Press the [MENU] button.
•
•
When operation stops for 10 seconds, the name at
that time is registered, and the Auxiliary input display
setting mode closes.
The Auxiliary Input Display can be set only when the
built-in auxiliary input or the auxiliary input of optional
KCA-S210A is used.
Function of the DPX701U (Russian sales area)
In Standby mode
Selecting Russian Characters
Select Russian as a text display language.
Display
Setting
"Russian : ON"
"Russian : OFF"
Displays texts using Russian characters.
Displays texts using European characters.
•
•
Texts displayed using Russian characters are as follows.
- Folder name/ File name/ Song title/ Artist name/
Album name
Texts cannot distinguish upper case and lower case in
Russian characters.
|
English
41
Menu system
In Standby mode
Text Scroll
Power OFF Timer
Setting the displayed text scroll.
Setting the timer to turn this unit’s power OFF
automatically when Standby mode continues.
Using this setting can save the vehicle’s battery
power.
Display
Setting
Doesn’t scroll.
"Scroll : Manual"/
"SCL MANU"
"Scroll : Auto"/
"SCL AUTO"
Scrolls when the display changes.
Display
Setting
"Power OFF : – – – –"/ Power OFF Timer function is OFF.
"OFF – – –"
"Power OFF : 20min"/ Turns the power OFF after 20 minutes.
"OFF 20M"
(Original setting)
"Power OFF : 40min"/ Turns the power OFF after 40 minutes.
"OFF 40M"
"Power OFF : 60min"/ Turns the power OFF after 60 minutes.
"OFF 60M"
•
The text scrolled is listed below.
- CD text
- Folder name/ File name/ Song title/ Artist name/
Album name
- MD title
- Radio text
•
Do this setting after setting <Security Code> (page
35).
In Standby mode
Built-in Auxiliary input Setting
Set the Built-in Auxiliary Input function.
In Standby mode
Display
Setting
CD Read Setting
"Built in AUX : OFF"/ When selecting the source there’s no
"AUX OFF"
"Built in AUX : ON"/
"AUX ON"
Auxiliary Input.
When selecting the source there’s Auxiliary
Input.
When there is a problem with playing a CD with
special format, this setting plays the CD by force.
Display
Setting
"CD Read : 1"/ "CD READ 1" Play CD and Audio file.
"CD Read : 2"/ "CD READ 2" Play CD by force.
•
Setting "CD Read : 2"/ "CD READ 2" cannot play Audio
file.
Some music CDs may not play even in the "CD Read :
2"/ "CD READ 2" mode.
|
42
English
Function of ACDrive media
Other than Standby mode
Voice Index
Audio Preset Memory
Setting the announcement during the play of
ACDrive media.
Registering the value setup by Sound Control. The
memory cannot be erased by the Reset button.
Display
"Voice Index : ON"/
"V-ID ON"
"Voice Index : OFF"/
"V-ID OFF"
Setting
1 Setup Sound Control
Refer to the following operations to setup the
Sound Control.
- <Audio Control> (page 47)
- <Audio Setup> (page 14)
Guide is announced.
Not be announced.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
•
DPX701U (Russian sales area)
Default setting is "Voice Index : OFF"
3 Select Audio Preset mode
Push the Control knob towards [FM] or [AM].
Select the "Audio Preset"/ "A-PRESET" display.
4 Enter Audio Preset mode
Press the Control knob for at least 1 second.
In CD/ USB mode
ACDrive firmware version display
5 Select the Audio Preset Memory
Push the Control knob towards [FM] or [AM].
Select the "Memory"/ "MEMORY" display.
Displaying the firmware version with the ACDrive
function.
6 Put the Audio Preset in the memory
Press the Control knob for at least 2 seconds.
The "Memory"/ "MEMORY" display blinks 1 time.
1 Select the firmware version display mode
Push the Control knob towards [FM] or [AM].
Select the "ACD F/W Version"/ "ACD VER" display.
7 Exit Audio Preset mode
Press the [MENU] button.
2 Display the ACDrive firmware version
Push the Control knob towards [4] or
[¢].
•
•
•
Register 1 pair of Audio Preset Memory. You cannot
register by the source.
When you press the Reset, all the sources will be the
setting value which is registered.
The following items cannot be registered.
Volume, Balance, Fader, Loudness, Volume offset, Dual
Zone System, Rear Volum
In CD/ USB mode
Unique ID display
Displaying the serial number for each product.
1 Select the unique ID display mode
Push the Control knob towards [FM] or [AM].
Select the "ACD Unique ID"/ "ACD ID" display.
2 Display the unique ID
Push the Control knob towards [4] or
[¢].
|
English
43
Menu system
Other than Standby mode
In Standby mode
Audio Preset Recall
Demonstration mode Setting
Recalling the sound setup registered by <Audio
Preset Memory> (page 43).
Sets the demonstration mode.
1 Select the Demonstration mode
Push the Control knob towards [FM] or [AM].
Select the "DEMO Mode"/ "DEMO" display.
1 Select the source
Press the [SRC] button.
2 Enter Menu mode
2 Set the Demonstration mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
Press the Control knob for at least 2 seconds.
Each time you press the knob at least 2 seconds,
the Demonstration mode alternates between the
settings shown in the table below.
3 Select Audio Preset mode
Push the Control knob towards [FM] or [AM].
Select the "Audio Preset"/ "A-PRESET" display.
Display
Setting
"DEMO Mode : ON"/ The Demonstration mode function is ON.
"DEMO ON"
"DEMO Mode : OFF"/ Exit Demonstration mode (Normal mode).
"DEMO OFF"
4 Enter Audio Preset mode
Press the Control knob for at least 1 second.
5 Select the Audio Preset Recall
Push the Control knob towards [FM] or [AM].
Select the "Recall"/"RECALL" display.
6 Recall the Audio Preset
Press the Control knob for at least 2 seconds.
The "Recall"/"RECALL" display blinks 1 time.
7 Exit Audio Preset mode
Press the [MENU] button.
•
•
The User memory of <System Q> (page 12) is
changed to the value which was recalled.
The source tone memory item of <Audio Control>
(page 47) is changed to the value which was recalled
by the selected source.
|
44
English
|
English
45
Accessory of the DPX701U
Basic Operations of remote control
SRC
ATT
VOL
SRC
AT T
VOL
38
AUD
AUD
38
FM+
4
¢
4/¢
AM–
2-ZONE
ABC
FM/AM/+/–
Not Used
2-ZONE
DIRECT
/OK
DIRECT
DEF
MNO
WXY
GHI
JKL
[0] — [9]
PRS
TUV
QZ
R.VOL
Loading and Replacing the battery
Basic operations
Use two "AA"/ "R6"-size batteries.
Slide the cover while pressing downwards to
remove it as illustrated.
Insert the batteries with the + and – poles aligned
properly, following the illustration inside the case.
[VOL] buttons
Adjusts the volume.
[SRC] button
Each time you press the button, the source
alternates.
For the source alternating order refer to
<Selecting the Source> (page 11).
[ATT] button
Turns the volume down quickly.
When the button is pressed again, the volume
returns to the previous level.
2WARNING
•
Store unused batteries out of the reach of children.
Contact a doctor immediately if the battery is
accidentally swallowed.
•
Do not set the remote control in hot places such as
on the dashboard.
|
46
English
Audio Control
In Disc/USB source
[AUD] button
Selects the Audio item to be adjusted.
[4]/ [¢] buttons
Going forwards and backwards between track/
files.
[VOL] buttons
Adjusts the Audio item.
[+]/ [–] buttons
Going forwards and backwards between disc/
folders.
•
•
Refer to <Audio Control> (page 47) for the operation
method, such as the procedures for Audio control and
others operations.
The remote control can only select and adjust the
Basic Audio item. Selecting and adjusting of the Detail
Audio item cannot be done.
[38] button
Each time you press the button, the song pauses
or plays.
[0] — [9] buttons
When in <Direct Track/File Search> (page 29) and
<Direct Disc Search> (page 29), enters the track/
file/disc number.
Dual Zone System
[2-ZONE] button
Each time you press the button, "2 ZONE" of
<Audio Setup> (page 14) is turned ON or OFF.
[5]/ [∞] buttons
Adjusts the volume of the rear channel.
The rear channel activates while the Dual Zone
System is ON.
In Tuner source
[FM]/ [AM] buttons
Selects the band.
Each time you press the [FM] button, the band
alternates between the FM1, FM2, and FM3
bands.
[4]/ [¢] buttons
Tune up or down band.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset stations.
[DIRECT] button
Enters and cancels the <Direct Access Tuning>
(page 22) mode.
[38] button
Enters and cancels the <PTY (Program Type)>
(page 25) mode.
|
English
47
Accessories/ Installation Procedure
5. Take Connector A on the wiring harness and
connect it to the external power connector on
your vehicle.
6. Connect the wiring harness connector to the
unit.
Accessories
1
7. Install the unit in your car.
8. Reconnect the - terminal of the battery.
9. Press the reset button.
..........1
2
•
If the power is not turned ON (or it is ON, but will be OFF
immediately), the speaker wire may have a short-circuit
or touched the chasis of the vehicle and the protection
function may have been activated. Therefore, the speaker
wire should be checked.
..........2
3
•
If your car is not prepared for this special connection-
system, consult your Kenwood dealer.
•
Only use antenna conversion adapters (ISO-JASO) when
the antenna cord has an ISO plug.
..........1
•
Make sure that all wire connections are securely made by
inserting jacks until they lock completely.
4
•
If your vehicle’s ignition does not have an ACC position,
or if the ignition wire is connected to a power source
with constant voltage such as a battery wire, the power
will not be linked with the ignition (i.e., it will not turn on
and off along with the ignition). If you want to link the
unit’s power with the ignition, connect the ignition wire
to a power source that can be turned on and off with the
ignition key.
..........1
5
•
If the fuse blows, first make sure that the wires have not
caused a short circuit, then replace the old fuse with one
with the same rating.
..........1
•
Insulate unconnected wires with vinyl tape or other
similar material. To prevent short circuits, also do not
remove the caps on the ends of the unconnected wires
or the terminals.
Connect the speaker wires correctly to the terminals to
which they correspond. The unit may receive damage or
fail to work if you share the - wires and/or ground them
to any metal part in the car.
6
..........1
•
7
•
After the unit is installed, check whether the brake lamps,
indicators, wipers, etc. on the car are working properly.
If the console has a lid, make sure to install the unit so
that the faceplate does not hit the lid when closing and
opening.
..........1
•
Installation Procedure
•
Mount the unit so that the mounting angle is 30° or less.
1. To prevent short circuits, remove the key from
the ignition and disconnect the - terminal of
the battery.
2. Make the proper input and output wire
connections for each unit.
3. Connect the wire on the wiring harness.
4. Take Connector B on the wiring harness and
connect it to the speaker connector in your
vehicle.
|
48
English
Connecting Wires to Terminals
EXT.
CONT
MUTE
P.CONT
ANT.CONT
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
English
|
49
Connecting Wires to Terminals
Connector Function Guide
Pin Numbers for Cable Colour
ISO Connectors
External Power
Connector
2WARNING
Connecting the ISO Connector
The pin arrangement for the ISO connectors depends
on the type of vehicle you drive. Make sure to make the
proper connections to prevent damage to the unit.
The default connection for the wiring harness is described
in 1 below. If the ISO connector pins are set as described
in 2 or 3, make the connection as illustrated.
Functions
A-4
A-5
A-6
A-7
A-8
Yellow
Battery
Power Control
Dimmer
Ignition (ACC)
Earth (Ground)
Connection
Blue/White
Orange/White
Red
Please be sure to reconnect the cable as shown 2 below
to install this unit to the Volkswagen vehicles etc.
Black
Speaker
Connector
1(Default setting) The A-7 pin (red) of the vehicle’s
ISO connector is linked with the ignition, and
the A-4 pin (yellow) is connected to the constant
power supply.
B-1
B-2
B-3
B-4
B-5
Purple
Purple/Black
Gray
Gray/Black
White
Rear Right (+)
Rear Right (–)
Front Right (+)
Front Right (–)
Front Left (+)
Ignition cable (Red)
Unit
Battery cable (Yellow)
A-7 Pin (Red)
B-6
B-7
B-8
White/Black
Green
Green/Black
Front Left (–)
Rear Left (+)
Rear Left (–)
Vehicle
A-4 Pin (Yellow)
2The A-7 pin (red) of the vehicle’s ISO connector
is connected to the constant power supply, and
the A-4 pin (yellow) is linked to the ignition.
Ignition cable
A-7 Pin (Red)
(Red)
Unit
Vehicle
A-4 Pin (Yellow)
Battery cable
(Yellow)
3The A-4 pin (yellow) of the vehicle’s ISO
connector is not connected to anything, while
the A-7 pin (red) is connected to the constant
power supply (or both the A-7 (red) and A-4
(yellow) pins are connected to the constant
power supply).
Ignition cable (Red)
Unit
Battery cable (Yellow)
A-7 Pin (Red)
Vehicle
A-4 Pin (Yellow)
•
When the connection is made as in 3 above, the unit’s
power will not be linked to the ignition key. For that
reason, always make sure to turn off the unit’s power
when the ignition is turned off.
To link the unit’s power to the ignition, connect the
ignition cable (ACC...red) to a power source that can be
turned on and off with the ignition key.
|
50
English
Installing the Escutcheon
For General Motors
1 Refer to the section <Removing the
Hard Rubber Frame> (page 53) and
then remove the hard rubber frame.
Cut out to meet the shape of the
opening in the vehicle.
2 Cut out accessory 4 to meet the
shape of the opening of the center
console.
3 Attach accessory 4 to the unit.
Accessory4
For TOYOTA/ SCION
1 Refer to the section <Removing
the Hard Rubber Frame> (page 53)
and then remove the hard rubber
frame.
Cutting line
2 Cut out accessory 4 as illustrated.
•
When cutting out accessory 4, make
sure it fits the opening of the center
console.
Accessory4
3 Fold double-sided adhesive
(accessory 5) along the slit and
attach it to accessory 4 cut-out
against the center rib as illustrated.
Use 2 pieces of accessory 5 for 1
accessory 4 cut-out.
Accessory5
4 Attach accessory 4 cut-out to the
unit.
English
|
51
Installation
Installing the Unit
Firewall or metal support
Screw (M4X8)
(commercially available)
Bend the tabs of the mounting
sleeve with a screwdriver or similar
utensil and attach it in place.
Self-tapping screw
(commercially available)
Accessory6
Metal mounting strap
(commercially available)
USB Device Connection
1 Remove the cap and connect the USB cable
(Accessory7).
2 Connect the USB device to the unit using the
supplied cable.
|
52
English
Removing the Hard Rubber Frame
(escutcheon)
1 Engage the catch pins on the removal tool 2
and remove the two locks on the lower level.
Lower the frame and pull it forward as shown in
the figure.
2 When the lower level is removed, remove the
upper two locations.
•
The frame can be removed from the top side in the same
manner.
Removing the Unit
1 Refer to the section <Removing the Hard Rubber
Frame> and then remove the hard rubber frame.
2 Remove the Hex-head screw with integral
washer (M4X8) on the back panel.
3 Insert the two removal tools 2 deeply into the
slots on each side, as shown.
4 Lower the removal tool towards the bottom, and
pull out the unit halfway while pressing towards
the inside.
•
Be careful to avoid injury from the catch pins on the
removal tool.
5 Pull the unit all the way out with your
carefully not to drop it.
Troubleshooting Guide
What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.
? No sound can be heard, or the volume is low.
✔
The fader or balance settings are set all the way to
one side.
☞
Center the fader and balance settings.
✔
The input/output wires or wiring harness are
connected incorrectly.
☞
Reconnect the input/output wires or the
wiring harness correctly. See the section on
<Connecting Wires to Terminals>.
General
? The power does not turn ON.
✔
The fuse has blown.
✔
✔
The values of Volume offset are low.
☞
☞
After checking for short circuits in the wires,
replace the fuse with one with the same
rating.
Turn up the Volume offset, referring to the
section on <Audio Setup> (page 14).
The <Built-in Amp Setting> (page 37) is OFF.
Turn it ON.
☞
? There’s a source you can’t switch.
✔
There’s no media inserted.
? The sound quality is poor or distorted.
☞
Set the media you want to listen to. If there’s
no media in this unit, you can’t switch to each
source.
✔
One of the speaker wires is being pinched by a
screw in the car.
☞
Check the speaker wiring.
✔
The Disc changer isn’t connected.
✔
The speakers are not wired correctly.
☞
☞
Connect the Disc changer. If the Disc changer
isn’t connected to it’s input terminal, You can’t
switch to an external disc source.
Reconnect the speaker wires so that each
output terminal is connected to a different
speaker.
? The memory is erased when the ignition is
turned OFF.
? The Touch Sensor Tone doesn’t sound.
✔
The preout jack is being used.
✔
The ignition and battery wire are incorrectly
☞
The Touch Sensor Tone can’t be output from
the preout jack.
connected.
☞
Connect the wire correctly, referring to the
section on <Connecting Wires to Terminals>.
✔
The <Touch Sensor Tone> (page 35) is OFF.
Turn it ON.
☞
? There’s no loudness effect.
You’re using Subwoofer preout.
Loudness has no effect in Subwoofer preout.
? Even though Synchronize Clock is ON, the clock
can’t be adjusted.
✔
☞
✔
The received RDS station isn’t sending time data.
☞
Receive another RDS station.
? The TEL mute function does not work.
The TEL mute wire is not connected properly.
✔
? The Dimmer function does not work.
☞
Connect the wire correctly, referring to the
section on <Connecting Wires to Terminals>.
✔
The Dimmer wire is not connected correctly.
Check the Dimmer wire connection.
The <Dimmer> (page 37) is OFF.
Turn it ON.
☞
✔
? The TEL mute function turns ON even though the
TEL mute wire is not connected.
☞
✔
The TEL mute wire is touching a metal part of the
? The sound is not output from Subwoofer or it
outputs the different sound.
car.
☞
Pull the TEL mute wire away from the metal
part of the car.
✔
When "2 ZONE"/ "2ZON" of <Audio Setup> (page
14) is set to ON.
☞
Set "2 ZONE" of <Audio Setup> to OFF.
? Even if Loudness is turned ON, high-pitched tone
isn’t compensated for.
? Cannot display the Russian characters.
✔
Tuner source is selected.
✔
---
☞
☞
High-pitched tone isn’t compensated for when
in Tuner source.
Refer to <Selecting Russian Characters> (page
41).
? The display blacks out while scrolling.
<Display Illumination Control> is set to OFF.
✔
☞
Refer to <Display Illumination Control> (page
37).
|
54
English
Tuner source
Disc source
? Radio reception is poor.
? "AUX EXT" is displayed without achieving
✔
The car antenna is not extended.
External disc control mode.
☞
Pull the antenna out all the way.
✔
Unsupported disc changer is connected.
✔
The antenna control wire is not connected.
☞
Use the disc changer mentioned in the
<About CD players/disc changers connected
to this unit> (page 4) of the section on <Safety
precautions>.
☞
Connect the wire correctly, referring to the
section on <Connecting Wires to Terminals>.
? The desired frequency can’t be entered with the
Direct Access Tuning.
✔
? The specified disc does not play, but another one
plays instead.
A station that can’t be received is being entered.
☞
Enter a station that can be received.
✔
The specified CD is quite dirty.
✔
You’re trying to enter a frequency with a 0.01 MHz
unit.
☞
Clean the CD.
✔
The disc is loaded in a different slot from that
specified.
☞
☞
What can be designated in the FM band is to
0.1 MHz.
Eject the disc magazine and check the
number for the specified disc.
? It isn’t the set Traffic information sound volume.
✔
The disc is severely scratched.
Try another disc instead.
✔
The set sound volume is less than the tuner sound
volume.
☞
☞
If the tuner sound volume is louder than the
set sound volume, the tuner sound volume is
used.
? A CD ejects as soon as it is loaded.
The CD is quite dirty.
✔
☞
Clean the CD, referring to the CD cleaning of
the section on <About CDs> (page 7).
? Can’t remove disc.
The cause is that more than 10 minutes has
✔
elapsed since the vehicle ACC switch was turned
OFF.
☞
The disc can only be removed within 10
minutes of the ACC switch being turned OFF.
If more than 10 minutes has elapsed, turn
the ACC switch ON again and press the Eject
button.
? The disc won’t insert.
There’s already another disc inserted.
Press the [0] button and remove the disc.
✔
☞
? Direct Search can’t be done.
Another function is ON.
Turn Random Play or other functions OFF.
✔
☞
? Track Search can’t be done.
For the discs/folders first or last song.
✔
☞
For each disc/folder, Track Search can’t be
done in the backward direction for the first
song or in the forward direction for the last
song.
English
|
55
Troubleshooting Guide
Audio file source
The messages shown below display your
systems condition.
? Cannot play an Audio file.
✔
The media is scratched or dirty.
Eject/ EJECT: No disc magazine has been loaded in
the changer. The disc magazine is not
completely loaded.
☞
Clean the media, referring to the CD cleaning
of the section on <About CDs> (page 7).
➪ Load the disc magazine properly.
No CD in the unit.
➪ Insert the CD.
? The sound skips when an Audio file is being
played.
✔
The media is scratched or dirty.
☞
Clean the media, referring to the CD cleaning
of the section on <About CDs> (page 7).
No Disc/ NO DISC:
No disc has been loaded in the disc
magazine.
➪ Load a disc into the disc magazine.
✔
The recording condition is bad.
Record the media again or use another media.
☞
? The Audio file track time isn’t displayed correctly.
TOC Error/ TOC ERR:
✔
---
☞
No disc has been loaded in the disc
magazine.
➪ Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-
down. The CD is scratched a lot.
➪ Clean the CD and load it correctly.
There are times when it isn’t displayed
correctly according to the Audio file recording
conditions.
USB device source
Read Error/ READ ERR:
? The USB device is not detected.
• The number of files or folders which are
stored in the connected USB device is
above the limitation.
✔
The USB connector is disconnected.
☞
Connect the connector of the USB device
properly.
• The file system of the connected USB
device is broken.
? The USB device does not play its audio files.
The USB connector is disconnected.
✔
➪ Copy the files and folders for the
USB device again referring to www.
kenwood.mediamanager.jp. If the error
message is still displayed, initialize the
USB device or use other USB devices.
☞
Connect the connector of the USB device
properly.
Error 05/ E-05: The CD is upside-down.
➪ Load the CD correctly.
Blank Disc/ BLANK:
Nothing has been recorded on the MD.
No Track/ NO TRACK:
No tracks are recorded on the MD,
although it has a title.
Error 15/ E-15: Media was played that doesn’t have data
recorded that the unit can play.
➪ Use media that has data recorded that
the unit can play.
No Panel/ NO PANEL:
The faceplate of the slave unit being
connected to this unit has been removed.
➪ Replace it.
Error 77/ E-77: The unit is malfunctioning for some reason.
➪ Press the reset button on the unit. If
the "Error 77/ E-77" code does not
disappear, consult your nearest service
center.
|
56
English
Mecha Error/ E-99:
Something is wrong with the disc
DEMO MODE (Blink):
The Demonstration mode has been
magazine. Or the unit is malfunctioning for
some reason.
selected.
➪ The <Demonstration mode Setting>
(page 44) is ON. Turn it OFF.
➪ Check the disc magazine. And then
press the reset button on the unit. If
the "Mecha Error/ E-99" code does not
disappear, consult your nearest service
center.
No Device/ NO DVICE:
The USB device is selected as a source
although no USB device is connected.
➪ Change the source to any source other
than USB. Connect an USB device, and
change the source to USB again.
Hold Error/ HOLD:
The protective circuit in the unit activates
when the temperature inside the
automatic disc changer exceeds 60°C
(140°F), stopping all operation.
➪ Cool down the unit by opening
the windows or turning on the air
conditioner. As the temperature falls
below 60°C (140°F), the disc will start
playing again.
N/A Device/ NA DVICE:
An unsupported USB device is connected.
➪ For the supported USB devices, refer to
<About USB device> (page 10).
No Music Data/ NO MUSIC:
• The connected USB device contains no
playable audio file.
• Media was played that doesn’t have data
recorded that the unit can play.
➪ Use media that has data recorded that
the unit can play.
No Name:
Attempted to display DNPS during the CD
play having no disc names preset.
Waiting/ WAITING:
Radio text data is being received.
Load/ LOAD: Discs are being exchanged in the Disc
changer.
USB Error/ USB ERR:
The connected USB device is rated a
current capacity higher than the allowable
limit.
➪ Check the USB device with reference to
<About USB device> (page 10).
Some trouble may have occurred to the
connected USB device.
➪ Remove the USB device and then
reconnect it. When the same message
displays again, use another USB device.
Reading/ READING:
The unit is reading the data on the disc.
IN (Blink):
The CD player section is not operating
properly.
➪ Reinsert the CD. If the CD cannot be
ejected or the display continues to flash
even when the CD has been properly
reinserted, please switch off the power
and consult your nearest service center.
Protect/ PROTECT (Blink):
The speaker wire has a short-circuit or
touches the chassis of the vehicle, and
then the protection function is activated.
➪ Wire or insulate the speaker cable
properly and press the reset button.
Unsupported File/ NA FILE:
An Audio file is played with a format that
this unit can’t support.
➪ ----
Copy Protection/ COPY PRO:
A copy-protected file is played.
➪ ----
English
|
57
Specifications
Specifications subject to change without notice.
AAC decode
FM tuner section
Frequency range (50 kHz space)
: 87.5 MHz – 108.0 MHz
Usable sensitivity (S/N = 26dB)
: 0.7 μV /75 Ω
Quieting Sensitivity (S/N = 46dB)
: 1.6 μV /75 Ω
Frequency response ( 3.0 dB)
: 30 Hz – 15 kHz
Signal to Noise ratio (MONO)
: 65 dB
Selectivity (DIN) ( 400 kHz)
: ≥ 80 dB
Stereo separation (1 kHz)
: 35 dB
: AAC-LC ".m4a" files
USB Interface
USB Standard
: USB 1.1/ 2.0
Maximum Supply current
: 500 mA
File System
: FAT16/ 32
MP3 decode
: Compliant with MPEG-1/2 Audio Layer-3
WMA decode
: Compliant with Windows Media Audio
AAC decode
: AAC-LC ".m4a" files
MW tuner section
Frequency range (9 kHz space)
: 531 kHz – 1611 kHz
Usable sensitivity (S/N = 20dB)
: 25 μV
Audio section
Maximum output power
: 50 W x 4
Output power (DIN 45324, +B=14.4V)
: 30 W x 4
Speaker impedance
: 4 – 8 Ω
Tone action
Bass : 100 Hz 8 dB
Middle : 1 kHz 8 dB
Treble : 10 kHz 8 dB
LW tuner section
Frequency range
: 153 kHz – 281 kHz
Usable sensitivity (S/N = 20dB)
: 45 μV
Preout level / Load
CD player section
Laser diode
: GaAlAs
Digital filter (D/A)
: 8 Times Over Sampling
D/A Converter
: 1 Bit
Spindle speed (Audio file)
: 500 – 200 rpm (CLV)
Wow & Flutter
: Below Measurable Limit
Frequency response ( 1 dB)
: 10 Hz – 20 kHz
Total harmonic distortion (1 kHz)
: 0.008 %
DPX701U: 5000 mV/10 kΩ (during disc play)
DPX501U: 2500 mV/10 kΩ
Preout impedance
DPX701U: ≤ 80 Ω
DPX501U: ≤ 600 Ω
Auxiliary input
Frequency response ( 1 dB)
: 20 Hz – 20 kHz
Input Maximum Voltage
: 1200 mV
Input Impedance
: 100 kΩ
General
Signal to Noise ratio (1 kHz)
DPX701U: 110 dB
Operating voltage (11 – 16V allowable)
: 14.4 V
Current consumption
: 10 A
Installation Size (W x H x D)
: 182 x 112 x 159 mm
Weight
DPX701U: 1.64 kg
DPX501U: 105 dB
Dynamic range
: 93 dB
MP3 decode
: Compliant with MPEG-1/2 Audio Layer-3
WMA decode
: Compliant with Windows Media Audio
DPX501U: 1.60 kg
|
58
English
|