Kenwood D R350 User Manual

CD PLAYER  
D-R350  
INSTRUCTION MANUAL  
KENWOOD CORPORATION  
This instruction manual for this model also covers the systems  
in the KENWOOD System “SERIES 21” lineup. Since the features  
vary depending on the combined systems, the remote control  
operationillustrations(icons)areshownfortwotypesofremote  
control units.  
Refer to the instruction manual included with the AV CONTROL  
CENTER for the basic remote control operations.  
COMPACT  
DIGITAL AUDIO  
B60-3276-00 MA ( K, P, T, M, I, X, Y )  
98/12 11 10 9 8 7 6 5 4 3 2 1 97/12 11 10 9 8 7 6  
ID  
D-R350 (En)  
Unpacking  
Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost.  
3
Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped  
to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier  
for shipping damage.  
We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.  
Keep this manual handy for future reference.  
Special features  
CD-TEXT support  
The text information (disc title, track titles, names of the artists, songwriters, composers,  
etc.) recorded on the CDs can be easily called and displayed in alphanumerics. (Some  
Japanese words and text may not be displayed.)  
$%  
Advanced technologies incorporated in pursuit  
of improved sound quality and stability  
D.R.I.V.E. (Dynamic Resolution Intensive Vector Enhancement) IC is built in for drastic re-  
duction of distortion at small signal level.  
Edit function for rearranging tracks according to the tape length so that no music is inter-  
Convenient features for dubbing CD onto tape  
Easy operation functions  
rupted in the middle.  
)
&
Auto space function.  
Easy operation functions allow systematic operation with other KENWOOD components  
connected through the system control connection.  
5
Accessories  
AC plug adaptor .............. (1)  
Audio cord ........................ (1)  
System control cord ............ (1)  
Use to adapt the plug on the power cord  
to the shape of the wall outlet.  
(Accessory only for regions where use is  
necessary.)  
Contents  
Caution: Read the pages marked  
carefully to ensure safe operation.  
Introduction.................................................................. 2  
Before applying power ................................................ 2  
Safety precautions....................................................... 2  
Special features ................................................................... 3  
System connections .................................................... 4  
Controls and indicators ............................................... 6  
Operation of remote control unit ............................... 7  
Remote Control Unit (RC) ................................................... 7  
Graphical Remote Control Unit (GRC) .............................. 8  
Basic Operations for the Graphical Remote  
Control Unit (GRC) .............................................................. 9  
Preparing to play tracks ............................................ 11  
Loading/Unloading discs .................................................. 11  
ALL TEXT SEARCH ............................................................ 11  
Normal play (TRACK mode)...................................... 12  
Playing tracks in order from track No.1 .......................... 12  
Playback from desired track ............................................. 13  
Skipping tracks .................................................................. 13  
Searching ........................................................................... 13  
Searching for tracks by title (TITLE SEARCH) ......... 14  
Displays ...................................................................... 15  
Time display on CD player (TIME DISPLAY) .................... 15  
Selecting the text information display  
(TEXT DISPLAY) ................................................................. 15  
Displaying all the text information (ALL INFO.) ............. 15  
Programmed play (PGM mode)................................ 16  
To check or change the programmed tracks .................. 17  
To add a track to the program ......................................... 17  
To clear tracks from the program .................................... 17  
Repeated playback .................................................... 18  
To repeat only the programmed tracks........................... 18  
To repeat the entire disc ................................................... 19  
Editing......................................................................... 20  
To check the edited contents ........................................... 21  
Playing or recording the edited contents ....................... 21  
To clear the edited contents ............................................. 21  
Playback in random order (Random playback) ....... 22  
Maintenance............................................................... 24  
In case of difficulty..................................................... 25  
Specifications ............................................................. 27  
System connections  
D-R350 (En)  
Malfunction of microcomputer  
Caution:  
4
If operation is not possible or erroneous display appears even  
though all connections have been made properly, reset the  
microcomputer referring to “In case of difficulty”.  
Do not plug in the power lead until all connections are com-  
pleted.  
Make connections as shown below.  
When connecting the related system components, refer also to the  
instruction manuals of the related components.  
Caution regarding placement  
To maintain proper ventilation, be sure to leave a space around the unit (from the largest outer  
dimensions including projections) equal to, or greater than, shown below.  
Left and right panels: 10 cm  
Rear panel: 10 cm  
Commercially-available  
optical fiber cable  
75coaxial cable with RCA PIN.  
Digital component (MD, DAT, etc.)  
(Commercially-available)  
(OPTICAL)  
DIGITAL INPUT  
(COAXIAL)  
OPTICAL  
COAXIAL  
L
R
TEXT  
SISTEM  
CONTROL  
LINE OUTPUT  
DIGITAL OUTPUT  
Remove the protection cap when using  
the DIGITAL OUTPUT (OPTICAL) jack.  
To AC outlet  
Audio cord  
SYSTEM  
CONTROL  
System control cord  
AV CONTROL CENTER (sold separately)  
or receiver (sold separately)  
CD  
L
AV CONTROL CERTER  
R
To wall AC outlet  
* The above illustration is simply an example.  
The actual connected equipment may vary depending on the sales area.  
1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced.  
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging  
connection cords without removal of the power cord can cause malfunctions or damage to the unit.  
NNootteess  
System connections  
D-R350 (En)  
Connection to a general-use amplifier  
Use the provided audio cords to connect the OUTPUT jacks of this  
5
unit to the CD input jacks (or AUX jacks) of the amplifier.  
Connection to digital amplifier or MD  
Connect the DIGITAL OUTPUT (OPTICAL or COAXIAL) jack to the  
digital input jack of the amplifier, DAT recorder, MD recorder, etc.,  
using an optical fiber cable or coaxial cable which are commercially  
available in audio stores.  
÷When using an optical fiber cable to connect this unit to a digital  
amplifier, insert the plug straight into the jack until a snap sound is  
heard.  
Optical fiber cable  
÷Be careful not to bend, coil, or bundle the optical fiber cable.  
÷Optical fiber cables available on the market may not always be able to  
be used with this player. If your cord cannot be used with this unit,  
consult the store from which you purchased the cord or your nearest  
dealer.  
SYSTEM CONTROL CONNECTIONS  
After hooking this unit up with the KENWOOD System “SERIES 21,” connect the system control cords for convenient system control  
operations between the connected devices.  
When hooking this unit up with the System “SERIES 21,” read the instruction manuals supplied with the AV CONTROL CENTER (sold  
separately) or the receiver (sold separately).  
NNootteess  
1. Do not connect system control cords to any components other than  
those specified by KENWOOD. It may cause a malfunction and dam-  
age your equipment.  
2. Be sure the system control plugs are inserted all the way in to the  
system control terminals.  
SYSTEM CONTROL OPERATIONS  
Remote Control  
Lets you operate this unit with the system remote control unit supplied with the AV CONTROL CENTER or receiver.  
Automatic Operation  
Automatically switches the input selector on the AV CONTROL CENTER or receiver when you start playback from this unit.  
Synchronized Recording  
Lets you synchronize recording with the start of playback when recording from CD. Also, the simple CCRS operation and O.T.E. recording lets you  
make great recordings from CD.  
See the operating instructions supplied with your cassette deck for details.  
Controls and indicators  
D-R350 (En)  
6
Play indicator  
(The displays given in this manual are approximations only.  
Theymaydifferfromwhatactuallyappearsonthedisplay.)  
Text information display  
••• • ••  
Pause indicator  
DISPLAY  
1 2 3 4  
5
6
7 8  
DISC  
3
1
2
4
5
4
DISC SELECTOR  
3
MULTIPLE CD PLAYER D-R350  
REPEAT RANDOM  
4
¢
1
2
5
DISC SKIP  
0
ON/STANDBY  
7
COMPACT  
DIGITAL AUDIO  
TEXT D.R.I.V.E.  
6
POWER  
9
0
!
ON/STANDBY  
(For U.S.A. and Canada)  
Thekeyswiththesamenameasthoseontheremotecontrol  
unit operate the same way as the remote control unit.  
1POWER key (For U.S.A. and Canada)  
!
!
7DISC SKIP key  
!@  
!
Press to rotate the disc tray or to select the disc.  
ON/STANDBY (  
) key (For other countries)  
8Open/Close key (0)  
Turns the unit ON/STANDBY.  
Opens and closes the disc tray.  
2STANDBY indicator  
6
*
#
@
(When this unit is connected to the system in standby mode,  
pressing this key will automatically turn the unit ON and open the  
disc tray.)  
3REPEAT key  
Press to play the tracks repeatedly.  
4RANDOM key  
9Disc tray  
Load the disc to be played back.  
0Play/Pause key (6)  
!
Press to play the tracks in a random order.  
5Skip keys (4,¢)  
@
Each time the key is pressed, playback and pause switch each other.  
(When this unit is connected to the system in standby mode,  
pressing this key will automatically turn the unit ON and start play-  
back.)  
Press to skip to the beginning of another track.  
6DISC SELECTOR keys/Indicators  
Press to select the disc to be played.  
!Stop key (7)  
@
About the STANDBY mode  
While the STANDBY indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called the standby mode. Under  
that condition, the system can be turned ON by the remote control unit.  
Operation of remote control unit  
Remote Control Unit (RC)  
D-R350 (En)  
7
A remote control unit is not included with this unit.  
However, a remote control is supplied with the KENWOOD SERIES 21 “AV CONTROL CENTER” (sold separately).  
To enable remote control operation, simply connect this unit, cassette deck (sold separately), and other accessories to the AV  
CONTROL CENTER with the system control cords.  
The keys with the same name as those on the main unit oper-  
ate the same way as the main unit.  
The keys marked * are provided only on the remote control  
unit.  
A
B
REMOTE CONTROL UNIT  
RC-S0504  
2
1
(ON/STANDBY) key  
!
POWER  
PTY  
SEARCH  
SLEEP  
DISPLAY  
+10  
1
3
*2AB switch  
Some keys serve two functions.  
Please follow the operating instructions and switch  
the function according to the application.  
1
2
7
3
4
9
5
0
6
8
(This unit should normally be set to the A side.)  
TITLE  
SEARCH TEXT DISP. ALL INFO.  
TUNER  
MEMO  
BAND  
A.MONI.  
MEMORY ALL TEXT  
*3Numeric keys ( 1 0 , +10  
)
#
AUTO  
RDS  
DISPLAY  
e
STILL STEP  
EDIT MODE DISC SKIP  
E
SEARCH  
P.CALL  
PTY  
%
TA/NEWS/INFO. FRAME/  
REPEAT  
4 Other function keys  
TIME  
CD/VIDEO CD/LD  
4
1
¡
4
¢
6
PREV.  
NEXT  
Text-related and other keys  
* TITLE SEARCH key  
* TEXT DISP. key  
$
%
%
!
)
P.MODE  
CHECK  
CLEAR  
TIME  
7
VIDEO CD  
P.B.C.  
LD  
PAL/NTSC  
SELECT  
RETURN  
FREEZE  
* ALL INFO. key  
AUTO DIGITAL O.T.E. REC/ARM  
* ALL TEXT SEARCH key  
8
°
TAPE  
1
* EDIT MODE key  
DISC SKIP key  
REPEAT key  
!@  
2
7
3
¡
SOURCE  
STEREO DIRECT  
PRO LOGIC 3 STEREO  
DSP  
(This key cannot be used with this unit.)  
MULTI  
CONTROL  
TEST  
TONE  
Basic function keys  
MODE  
2
%
* Search keys (1,¡)  
Skip keys (4,¢)  
Play/Pause key (6)  
Stop key (7)  
#
#
@
@
LEVEL  
VOLUME  
TAPE 2  
INPUT  
MUTE  
(MONITOR)  
Program-related and other keys  
* P.MODE key  
^
&¡  
&¡  
%
* CHECK key  
* CLEAR key  
* TIME key  
This illustration is only an example.  
Operation of remote control unit  
D-R350 (En)  
Graphical Remote Control Unit (GRC)  
8
A remote control unit is not included with this unit.  
However, a remote control is supplied with the KENWOOD SERIES 21 “AV CONTROL CENTER” (sold separately).  
To enable remote control operation, simply connect this unit, cassette deck (sold separately), and other accessories to the AV  
CONTROL CENTER with the system control cords.  
4
3
5
Input  
Main Menu  
Return  
ENTER  
Source  
CD  
Tuner  
TV  
LD  
Tape1 TapeA  
1
2
Set Up Confirm  
VOLUME  
Cable Sat.  
VCR1 VCR2 TapeB  
CD  
Track 00  
Disc Skip  
Disc 0  
MUTING  
10key  
Pad  
Mode  
6
ON /STANDBY  
REMOTE CONTROL UNIT  
3
7
1Segment screen  
5ENTER key  
7CD player operation panel  
This screen is used for selecting the  
icons for the main equipment.  
Press this button to input the selected  
icon (operation mode, and so on).  
Play/Pause icon (6)  
Stop icon (7)  
@
@
#
Search icons (1, ¡)  
These icons send the track forward or backward.  
2Menu screen  
Mode icon  
*
This screen is used for selecting the  
icons for the operating modes.  
6
(ON/STANDBY) key  
This key turns ON/STANDBY this unit  
or the equipment connected with the  
system control cords.  
This icon is used to select the playback mode.  
Skip icons (4, ¢)  
#
When selected, the next track in the icon direction is  
played.  
Disc Skip icon  
This icon is used to rotate the disc tray or to select  
the disc.  
!@  
3Icons  
Icons for the equipment used and  
operating mode are displayed.  
10key Pad icon  
#
This icon switches to the Numeric Icon menu screen.  
4Joystick  
The joystick is used when selecting  
the icons.  
(Lightly press the edge of 5.)  
Operation of remote control unit  
D-R350 (En)  
Turn the system devices ON.  
Preparation  
9
Input  
Main Menu  
Return  
ENTER  
Source  
CD  
Tuner  
TV  
LD  
Tape1 TapeA  
You may skip Step 1 if the settings for the AV CONTROL CENTER  
have already been made.  
Set Up Confirm  
Cable Sat.  
VCR1 VCR2 TapeB  
VOLUME  
CD  
Track 00  
Disc Skip  
Disc 0  
MUTING  
10key  
Pad  
Mode  
Once the settings have been made in Steps 1 to 3, you do not  
ON /STANDBY  
REMOTE CONTROL UNIT  
need to repeat these steps until you replace the batteries.  
GRC operation  
The  
beginning on page 11 are written assuming  
that the basic operations below have been completed.  
Basic Operations for the Graphical Remote Control Unit (GRC)  
1
At the initial screen, select the Model Type to  
be used.  
Use the joystick to select the model  
1
1
type.  
Example:  
Select  
Screen after selection  
Input  
Main Menu  
Source  
Tuner  
ENTER  
Set Up 
Model 4  
yp  
p
Model  
T
e Setu  
Setup  
C D L D Tape1 VCR1  
Sat. T V Cable VCR2  
DVD/6ch Input  
2
Model 1  
Model 2  
Model 3  
Model 4  
Model 5  
Model 6  
Press the ENTER key to set the entry.  
2
Sound Speaker Reset  
The arrow ( ) shows the direction that the cursor moves  
when selecting icons.  
The selected icon is highlighted.  
2Select CD at the Setup menu screen.  
Select  
Screen after selection  
Use the joystick to select the CD icon.  
1
Input  
Input  
Main Menu  
Source  
Main Menu  
Source  
1
Tuner  
Tuner  
Set Up  
Return  
Set Up 
CD  
Setup  
Setup CD  
C D L D Tape1 VCR1  
Sat. T V Cable VCR2  
DVD/6ch Input  
Single  
Dual  
ENTER  
Press the ENTER key to set the entry.  
2
Carrousel  
Changer  
2
Sound Speaker Reset  
3Select Carrousel at the Setup CD menu screen.  
Use the joystick to select the Carrousel  
icon.  
Select  
Screen after selection  
1
1
Input  
Input  
Main Menu  
Source  
Main Menu  
Return  
Source  
Tuner  
CD  
Tuner  
Return  
Set Up 
Set Up 
Carrousel  
Setup CD  
Setup CD  
ENTER  
Single  
Dual  
Single  
Dual  
Press the ENTER key to set the entry.  
2
Theselectedtextmovestothebottomright  
of the screen.  
Carrousel  
Changer  
Carrousel  
Changer  
2
4Select CD at the Segment screen.  
Select  
Screen after selection  
Use the joystick to select the CD icon.  
1
Input  
Input  
1
Main Menu  
CD  
Main Menu  
Source  
Source  
Tuner  
CD  
Tuner  
Return  
Set Up 
Set Up Confirm  
CD  
Setup CD  
CD  
ENTER  
Single  
Dual  
Track 00  
Disc Skip  
Disc 0  
Press the ENTER key to set the entry.  
2
Carrousel  
Changer  
10key  
Pad  
2
Mode  
Operation of remote control unit  
D-R350 (En)  
10  
Input  
Main Menu  
Return  
ENTER  
Source  
CD  
Tuner  
TV  
LD  
Tape1 TapeA  
Set Up Confirm  
Cable Sat.  
VCR1 VCR2 TapeB  
VOLUME  
CD  
Track 00  
Disc Skip  
Disc 0  
MUTING  
10key  
Pad  
Mode  
ON /STANDBY  
REMOTE CONTROL UNIT  
Graphical Remote Control Unit (GRC)  
This instruction manual for this model also covers the systems in the KENWOOD System “SERIES 21” lineup. Since the features  
vary depending on the combined systems, the remote control operation illustrations (icons) are shown for two types of remote  
control units.  
To avoid a confusing and difficult-to-follow explanation of the graphical remote control unit, a simplified explanation is  
provided using the operating instructions for a general remote control unit. Please reread the operating instructions while  
referring to the main differences below.  
RC operation  
Operations with the general remote control unit are indicated by  
.
GRC operation  
Operations with the graphical remote control unit are indicated by  
.
REMOTE CONTROL UNIT  
RC-S0504  
RC operation  
GRC operation  
Text replacement or actual operation  
Key  
Press  
Icon  
Select  
Select and press the ENTER key.  
Press the ** key  
Select the ** icon  
Select the ** icon and press the ENTER key.  
6
ENTER  
ENTER  
Use  
to select  
and press the  
key.  
key.  
ENTER  
*1  
Mode  
ENTER  
P.MODE  
ENTER  
ENTER  
ENTER  
ENTER  
Use  
Use  
Use  
to select  
to select  
and press the  
Mode  
PGM  
*2  
ENTER  
P.mode  
ENTER  
ENTER  
and press the  
key.  
PGM  
Return  
ENTER  
*3  
ENTER  
to select P.mode and press the  
key.  
*1: Icons with shading are input when the ENTER key is pressed.  
*2: Icons without shading send you to another menu screen (level) for the next operation. At the new  
menu screen, you can select the desired icon.  
*3: To return to the previous menu screen (level), select the Return icon, and press the ENTER key.  
Preparing to Play Tracks  
D-R350 (En)  
÷Turn the unit ON.  
Preparation  
11  
(For U.S.A. and Canada) (For other countries)  
POWER  
ON/STANDBY  
ON/STANDBY  
GRC operation  
: Complete the procedure in “Basic Operations  
for the Graphical Remote Control Unit (GRC)”  
90  
: Keys and control used in the operations described on this page.  
Loading/unloading discs  
1Load/unload a disc.  
Open the tray.  
1
0
÷Do not touch the played side of disc.  
Place/remove a disc.  
2
÷Loading two discs together will cause malfunctioning.  
÷Place the disc properly along the groove on the tray. (If the disc is not  
placed horizontally, malfunction will result.)  
Label side  
÷A single CD (8 cm disc) can also be played.  
÷Ordinary CD single (8 cm) disc adapters sold in audio stores cannot be  
used with this unit.  
Disc tray  
When loading or unloading other discs  
3
DISC SKIP  
÷When loading/unloading a disc while the tray rotates, a malfunction  
might occur. Load/unload the disc when the tray does not rotate.  
2Close the tray.  
DISC  
1
2
3
4
5
0
All DISC indicators " " light regardless of how many discs are  
present.  
Remote control unit only  
ALL TEXT SEARCH  
For most CD-TEXT discs, it is convenient to read the complete disc information into the CD player before playing the disc.  
This allows text information such as TITLE SEARCH, TEXT DISPLAY, ALL INFO., and other messages to be displayed faster.  
Search in progress or  
reading information  
After loading all the discs, operate in stop mode.  
RC operation  
Blinks.  
GRC operation  
DISC READING  
«
Mode  
ENTER  
ALL TEXT  
SEARCH  
Text  
ENTER  
FRAM
TIME  
D1 : CD TEXT  
When the disc is CD-TEXT  
All Text Search  
ENTER  
÷Repeat the above procedure so that the complete disc information is  
÷The information read into the CD player is cleared when the  
tray is opened. Therefore, perform this operation again if the  
tray was opened.  
read into the CD player.  
÷In the case of a non-CD-TEXT disc, the ”D1 : NO CD TEXT“ display will  
appear.  
Normal play (TRACK mode)  
UsethefollowingproceduretoplayaCDintheoriginalorder  
of tracks from track No. 1.  
D-R350 (En)  
12  
÷Load a disc in the CD player.  
Preparation  
GRC operation  
: Complete the procedure in “Basic Operations  
for the Graphical Remote Control Unit (GRC)”  
90  
: Keys and control used in the operations described on this page.  
Playing tracks in order from track No. 1  
Check that the unit is in the normal play TRACK  
1
mode.  
#
2Start playback.  
Blinks during playback.  
Select the disc.  
DISC  
1
2
3
4
5
DISC SELECTOR  
3
1
2
4
5
If there is no disc in the selected disc tray,  
the corresponding indicator " " goes off.  
÷Playback starts from the disc selected in order of the DISC No.  
÷When the 3/8key is pressed without selecting a disc, playback starts  
from the indicated DISC No.  
DISC SKIP  
Lights up.  
01  
Track NO. being played  
1:23  
Elapsed time of track being played  
÷In the case of a CD-TEXT disc, the disc’s title is scrolled on the display.  
WhatisthendisplayedisinaccordancewiththeTEXTDISPLAYmode.  
%
To pause playback  
To stop playback  
7
6
01  
Lights up.  
÷Each press pauses and plays the CD alternately.  
Normal play (TRACK mode)  
D-R350 (En)  
Remote control unit only  
Playback from desired track  
13  
RC operation  
GRC operation  
1 Select the disc.  
DISC SKIP  
REPE
Disc Skip  
ENTER  
2 Select the desired track No.  
RC operation  
Press the numeric keys as shown below....  
To enter track No. 23 : 003  
To enter track No. 40 : 0000)  
10key  
Pad  
ENTER  
+10  
1
6
2
7
3
8
4
9
5
1 2 3  
0
GRC operation  
4 5 6  
7 8 9  
Press the ENTER key after selecting each numeric icon.  
To enter track No. 23 : 0ENTER, 0ENTER, 3ENTER  
0 +10  
ENTER  
÷When using the GRC, you can return to the previous menu screen  
(level) at any time by selecting the Return icon and pressing the  
ENTER key.  
Skipping tracks  
RC operation  
GRC operation  
To skip  
backward  
To skip  
forward  
÷The track in the direction of the pressed key is skipped, and the selected  
track will be played from the beginning.  
÷When the 4 key is pressed once during playback, the track being  
played will be played from the beginning.  
4
PREV.  
¢
NEXT  
To skip  
To skip  
forward  
ENTER  
backward  
Remote control unit only  
Searching  
RC operation  
GRC operation  
Forward  
search  
Forward  
search  
CD/VIDEO CD/LD  
1
¡
ENTER  
Backward  
search  
Backward  
search  
÷Playback starts from the position where the key is released.  
Keep the ENTER key pressed.  
What is the “normal play TRACK mode”?  
The normal play TRACK mode refers to the state in which the PGM, EDIT and RANDOM mode displays are off.  
RC operation  
GRC operation  
Goes off.  
Goes off.  
Goes off.  
P.MODE  
Mode  
ENTER  
Mode  
ENTER  
PGM EDIT RNDM  
PGM  
ENTER  
Random  
ENTER  
Main unit operation  
P.mode  
ENTER  
To set the unit to the TRACK mode:  
Press the P.MODE key when the ”PGM“ or ”EDIT“ display is  
lighted.  
RANDOM  
Press the RANDOM key when the ”RNDM“ display is lighted.  
Searching for tracks by title (TITLE SEARCH)  
In the case of a CD-TEXT disc, the tracks to be heard can be  
searched by title.  
D-R350 (En)  
14  
÷Load a disc (CD-TEXT support) in the CD  
player.  
Preparation  
÷Check that the unit is in the normal play  
TRACK mode.  
#
÷Press the ALL TEXT SEARCH key. !  
GRC operation  
: Complete the procedure in “Basic Operations  
for the Graphical Remote Control Unit (GRC)”  
90  
: Keys and control used in the operations described on this page.  
1Press the TITLE SEARCH key.  
Blinks.  
RC operation  
GRC operation  
TITLE  
SEARCH  
Mode  
ENTER  
D1 01 TITLE ABC  
Track title  
Text  
A.MON
ENTER  
÷When no CD-TEXT discs are loaded, the ”NO CD TEXT“ display will  
appear for approx. 3 seconds.  
Title Search  
ENTER  
To stop the search, press the TITLE SEARCH key again.  
2Select the name of the track (title) to be heard.  
RC operation  
GRC operation  
The track number  
skips forward.  
The track number  
skips forward.  
D1 02 TITLE XYZ  
4
PREV.  
¢
NEXT  
If no keys are operated for more than a second, the track title is scrolled  
on the display.  
ENTER  
The track number  
skips backward.  
The track number  
skips backward.  
3Start playback.  
RC operation  
GRC operation  
TITLE XYZ  
The letters move toward the left.  
6
ENTER  
02  
Track NO. being played  
1:23  
Elapsed time of track being played  
÷What is displayed will differ depending on the item which has been  
selected by TEXT DISPLAY.  
%
Display scrolling  
Some track titles contain so much text information that  
the full titles will not fit on the display. In cases like this,  
the letters on the display move from right to left so that the  
non-visible part of the title is revealed. This type of display  
movement is known as “scrolling display.”  
Display example  
0 1 A B C D E F G H I J K L M N O P Q ...  
Scroll display  
M N O P Q ...  
Displays  
D-R350 (En)  
Remote control unit only  
Time display on CD player (TIME DISPLAY)  
15  
Each press of the TIME key changes the displayed contents.  
1
2
3
4
: Elapsed time of track being played  
: Remaining time of track being played  
1 :23  
-2 :37  
RC operation  
GRC operation  
Mode  
ENTER  
: Elapsed time of entire disc  
(T lights up.)  
TIME  
23 :45T  
-36 :25T  
: Remaining time on entire disc (T lights up.)  
Time  
ENTER  
÷Only the display 1 and 2 will be displayed in PGM, RANDOM and  
EDIT modes.  
Do this operation in the play mode.  
Remote control unit only  
Selecting the text information display (TEXT DISPLAY)  
In the case of a CD-TEXT disc, the displays shown below can  
be selected.  
In the stop mode When the key is pressed once, the 1 “Disc  
Title” is scrolled on the display; when it is  
pressed repeatedly, the display is changed.  
(This operation cannot be performed in the  
PGM mode.)  
RC operation  
GRC operation  
Mode  
ENTER  
1 Disc Title  
: Disc title  
TEXT DISP.  
2 Disc Artist : Singer (or performer)  
Text  
3 TIME  
: Disc No., track No., time display  
e
STP  
E
ENTER  
Text Display  
ENTER  
÷If the key is released while 2 Disc Artist“ is displayed, 1 Disc  
Title“ returns to the display.  
In the play mode When the key is pressed once, the 1 “Track  
Title” is scrolled on the display; when it is  
Disc Title : AB  
Scroll display  
pressed repeatedly, the display is changed.  
1 Track Title : Track title  
2 Track Artist : Singer (or performer)  
: ABCDEF...  
3 Disc Title  
4 Disc Artist : Singer (or performer)  
5 TIME : Track No., time display  
: Disc title  
÷When there is no text information to be displayed “– – – – –” is  
scrolled on the display.  
÷In the case of a non-CD-TEXT disc, the ”NO CD TEXT“ display will  
appear for approx. 3 seconds.  
÷If the key is released at any point while 2 Track Artist“ to 4 Disc  
Artist“ is displayed, 1 Track Title“ returns to the display.  
Remote control unit only  
Displaying all the text information (ALL INFO.)  
In the case of a CD-TEXT disc, the text information shown below is displayed automatically during normal play (TRACK mode).  
RC operation  
GRC operation  
Each item is displayed in turn each time the key is pressed.  
When the key is repeatedly pressed while an item is being displayed,  
the display is forcibly moved to the next item.  
Mode  
ENTER  
ALL INFO.  
Text  
ENTER  
STEP  
1 Disc/Track Title : Disc and track titles  
2 Disc/Track Artist : Singer (or performer)  
3 Disc/Track Songwriter : Songwriter  
4 Disc/Track Composer : Composer  
All  
Info.  
ENTER  
5 Disc/Track Arranger  
: Arranger  
Scroll display  
6 Disc/Track Message  
: Message from sponsor or artist  
7 ID INFO.  
8 Genre INFO.  
: Record company, release date, etc.  
: Genre information  
Arranger : ABCD  
9 ALL INFO. END : (Release)  
To skip to the next track while the items are being displayed:  
Press the ¢key.  
÷Items from 1 to 6 are displayed in the sequence of disc and track.  
÷When there is no text information to be displayed “– – – – –” is scrolled  
on the display.  
÷In the case of a non-CD-TEXT disc, the ”NO CD TEXT“ display will  
appear for approx. 3 seconds.  
÷The display can be returned to a previous item by pressing the 4  
key.  
÷ALL INFO. is released when any other key is pressed while items  
are being displayed.  
Programmed play (PGM mode)  
Use the following procedure to program desired tracks in a  
desired order. (Up to 32 tracks)  
D-R350 (En)  
16  
÷Load a disc in the CD player.  
Preparation  
÷Set the INPUT SELECTOR to ”CD“ on the  
connected device such as AV CONTROL  
CENTER or receiver.  
GRC operation  
: Complete the procedure in “Basic Operations  
for the Graphical Remote Control Unit (GRC)”  
90  
: Keys and control used in the operations described on this page.  
1Press so that the “PGM” indicator lights.  
RC operation  
GRC operation  
Blinks.  
Mode  
ENTER  
P.MODE  
PGM  
PGM01 DISC?  
ENTER  
P.mode  
ENTER  
Do this operation in the stop mode.  
2Program desired tracks.  
RC operation  
GRC operation  
PGM01 D1 TNO.??  
1Select the disk.  
DISC SKIP  
REPE
In the case of a CD-TEXT disc, the disc title is scrolled on the display.  
Disc Skip  
ENTER  
PGM01 D1 TNO.25  
«
Go to step 2within 8 seconds.  
2Select the desired track No.  
PGM01 ABCDEFGH  
In the case of a CD-TEXT disc, the track’s title is scrolled on the display.  
1 2 3  
+10  
5
4 5 6  
7 8 9  
1
6
2
7
3
8
4
9
0
0 +10  
ENTER  
RC operation  
GRC operation  
Press the numeric keys as shown below....  
To enter track No. 25: 005  
Press the ENTER key after selecting each numeric icon.  
#
Go to step 3within 8 seconds.  
PGM01 D1 TNO.25  
3Set the entry.  
P.MODE  
÷Tracks can also be selected by pressing the 4 or ¢key.  
÷Up to 32 tracks can be programmed. When “FULL” is displayed, no  
more tracks can be programmed.  
P.mode  
ENTER  
4Repeat steps 1, 2and 3above.  
÷If you make a mistake, press the CLEAR key and enter the track No.  
from the beginning.  
3Start playback.  
RC operation  
6
÷When the 4or ¢key is pressed during playback, the track will be  
skipped in the direction of the pressed button.  
÷When the 4key is pressed once during playback, the play position  
returns to the beginning of the current track being played.  
GRC operation  
ENTER  
To stop playback  
Press the 7key.  
÷The programmed contents remain in memory.  
Programmed play (PGM mode)  
D-R350 (En)  
To check or change the programmed tracks  
17  
Blinks.  
RC operation  
GRC operation  
1Press the CHECK key.  
PGM01 D5 TNO.25  
CHECK  
Check  
ENTER  
Press until the track No. to  
÷Perform only step 1 to simply check the program.  
÷In the case of a CD-TEXT disc, the track’s title is scrolled on the display.  
÷Each time the key is pressed, the program No. and the track No. on CD  
are displayed.  
be changed is displayed.  
2Select the disk.  
DISC SKIP  
REPE
Disc Skip  
ENTER  
3Select the new track No.  
Example  
1 2 3  
4 5 6  
7 8 9  
+10  
5
÷Press it while the “PGM 01” indicator blinks.  
÷The track being played cannot be changed.  
1
6
2
7
3
8
4
9
0
0 +10  
ENTER  
4Set the entry.  
P.MODE  
P.mode  
ENTER  
To add a track to the program  
RC operation  
GRC operation  
1Select the disk.  
DISC SKIP  
Disc Skip  
ENTER  
REPE
2Select the desired track No.  
1 2 3  
+10  
4 5 6  
1
6
2
7
3
8
4
9
5
7 8 9  
0
0 +10  
ENTER  
÷When a track No. is selected, the track will be added to the end of the  
existing program.  
3Press the P.MODE key.  
Remote control unit only  
To clear tracks from the program  
RC operation  
GRC operation  
Press to clear tracks from the end.  
÷Each time the key is pressed, the last track in the program is cleared.  
÷The tracks which are programmed earlier than the track being played  
cannot be cleared.  
CLEAR  
Clear  
ENTER  
To clear all track.  
P.MODE  
÷Selected tracks can be also completely cleared just by operating the 0  
P.mode  
ENTER  
key.  
÷The entire program is cleared.  
Auto space function  
During programming of tracks, a non-recorded space of a few  
seconds will be automatically created between tracks.  
By recording tracks with these spaces on tape, the search and  
repeat play operations of tape using the DPSS function (which  
works by searching the non-recorded spaces) can be performed  
reliably.  
÷Even when the performances of two tracks are continuous (which  
occurs with classical or live recording music), the spaces will be  
created if they have different track Nos.  
Repeated playback  
D-R350 (En)  
÷Load a disc in the CD player.  
Preparation  
18  
÷Set the INPUT SELECTOR to ”CD“ on the  
connected device such as AV CONTROL  
CENTER or receiver.  
: Complete the procedure in “Basic Operations  
GRC operation  
for the Graphical Remote Control Unit (GRC)”  
90  
: Keys and control used in the operations described on this page.  
To repeat only the programmed tracks  
RC operation  
GRC operation  
Press so that the “PGM” indicator lights.  
1
Mode  
ENTER  
PGM01 DISC?  
P.MODE  
PGM  
ENTER  
P.mode  
ENTER  
2Select the disk.  
DISC SKIP  
REPE
Disc Skip  
ENTER  
Go to step 3within 8 seconds.  
÷All of the programmed tracks will be repeated.  
3Select the desired track No.  
÷In case only one track is programmed, only that track will be repeated.  
÷Up to 32 tracks can be programmed. When FULLis displayed, no  
more tracks can be programmed.  
1 2 3  
+10  
4 5 6  
1
6
2
7
3
8
4
9
5
0
7 8 9  
0 +10  
ENTER  
Go to step 4within 8 seconds.  
4Set the entry.  
P.MODE  
P.mode  
ENTER  
5Repeat steps 24above.  
Switch REPEAT ON.  
6
REPEAT  
Return  
REPEAT ON  
ENTER  
Repeat  
ENTER  
Main unit operation  
GRC operation  
The current status is displayed when the key is pressed  
once. When it is pressed while the status is displayed, the  
repeat ON status can be set to OFF (or vice versa).  
To display the current status, first select the Return icon and press  
the ENTER key, and then select the Repeat icon and press the  
ENTER key.  
Pressing the ENTER key again while the status is displayed will set  
the repeat ON status to OFF (or vice versa).  
Start playback.  
7
PGM  
ENTER  
6
ENTER  
To cancel repeated playback  
Press the REPEAT key twice. (REPEAT ON OFF)  
(
Repeated playback  
D-R350 (En)  
19  
To repeat the entire disc  
This allows repeated playback of all the tracks on the disc  
loaded in the disc tray.  
RC operation  
GRC operation  
Press so that the “PGM” indicator  
goes off.  
1
\
PGM01  
01  
Mode  
ENTER  
P.MODE  
PGM  
ENTER  
P.mode  
ENTER  
Switch REPEAT ON.  
2
Return  
REPEAT  
REPEAT ON  
ENTER  
Repeat  
ENTER  
Main unit operation  
GRC operation  
The current status is displayed when the key is pressed  
once. When it is pressed while the status is displayed, the  
repeat ON status can be set to OFF (or vice versa).  
To display the current status, first select the Return icon and press  
the ENTER key, and then select the Repeat icon and press the  
ENTER key.  
Pressing the ENTER key again while the status is displayed will set  
the repeat ON status to OFF (or vice versa).  
Start playback.  
3
PGM  
ENTER  
6
ENTER  
To cancel repeated playback  
Press the REPEAT key twice. (REPEAT ON OFF)  
Main unit operation  
GRC operation  
REPEAT  
Return  
ENTER  
Repeat  
ENTER  
Editing  
D-R350 (En)  
The following procedure allows to record a CD within the specified tape length so that no music is interrupted in the middle  
at the ends of sides A and B.  
20  
÷Load a disc in the CD player.  
Preparation  
÷Check that the unit is in the normal play  
TRACK mode.  
#
÷ Set the INPUT SELECTOR to ”CD“ on the  
connected device such as AV CONTROL  
CENTER or receiver.  
GRC operation  
: Complete the procedure in “Basic Operations  
for the Graphical Remote Control Unit (GRC)”  
90  
: Keys and control used in the operations described on this page.  
1Light the “EDIT” indicator.  
Blinks.  
RC operation  
GRC operation  
EDIT MODE  
EDIT DISC?  
Mode  
ENTER  
Edit  
ENTER  
÷Do this operation in the stop mode.  
Go to step 2 within 8 seconds.  
If more than 8 seconds have elapsed,  
press the key again.  
2Select the disc.  
RC operation  
GRC operation  
DISC SKIP  
Disc Skip  
ENTER  
REPEA
E
d
ENTER  
i
t
EDIT MODE  
Go to step 3 within 8 seconds.  
3Enter the recording time of the tape.  
Press the numeric keys as shown below...  
RC operation  
30-minute tape : 000)  
RC operation  
GRC operation  
46-minute tape : 00006  
When using the numeric keys:  
GRC operation  
Press the ENTER key after selecting each numeric  
icon.  
30-minute tape : 0ENTER, 0ENTER,  
0ENTER, )ENTER  
1 2 3  
+10  
4 5 6  
1
6
2
7
3
8
4
9
5
7 8 9  
0
0 +10  
ENTER  
EDIT DISC3 C-46  
When using the TIME key:  
÷Recording within 99 minutes can be specified in minutes (2 digits).  
÷If you commit a mistake in time entry, press the P.MODE key and  
restart the procedure from the beginning.  
1 Select the time.  
TIME  
Time  
ENTER  
÷By pressing the TIME key the set time-length intervals will change in  
this order:  
"46=54=60=74=90=??"  
2 Set the entry.  
EDIT MODE  
÷The interval length can be adjusted with the skip keys 4and ¢in  
units of one minute (to a maximum of 99 minutes).  
E
d
ENTER  
i
t
Editing  
D-R350 (En)  
The CD contents are edited as follows.  
(1) The tape recording time input is divided by two, and tracks that can  
be accommodated in file A(which refers to tracks on tape side A) are  
selected in order of their track Nos.  
21  
Editing in the FILE A  
EDIT A 01  
(2) In a few seconds, the time left on tape side A is displayed, then file  
B (tracks on tape side B) is edited in the same manner.  
The selected track numbers are displayed in sequence.  
EDIT A -1:23  
Remaining time display.  
1. While you can edit with a different time setting to that of the tape you are using, part of the tape may be left with nothing recorded on it, or  
the last track on side A or side B may be cut short.  
2. The EDIT function may not operate properly for discs having only one track or having tracks of long duration such as classical music.  
NNootteess  
Remote control unit only  
To check the edited contents  
RC operation  
GRC operation  
EDIT A 01  
CHECK  
Check  
ENTER  
÷When the CHECK key is pressed, track numbers and remaining time  
in the file A are displayed first, then those in the file B.  
Playing or recording the edited contents  
Press the 6key to start playback according to the edited  
RC operation  
GRC operation  
content. The playback pauses at the beginning of the track  
NNoottee  
edited for tape side B. Press the 6key again to continue  
playback.  
Return  
6
ENTER  
When recording the edited content onto a tape, it is recommended  
to use the synchro recording or CCRS recording function of  
KENWOOD cassette decks.  
ENTER  
÷For details, see the instruction manual of the cassette deck.  
To clear the edited contents  
RC operation  
GRC operation  
Press any one of these keys.  
P.MODE  
P.mode  
ENTER  
CLEAR  
Clear  
ENTER  
÷The edited data is cleared entirely.  
Main unit operation  
0
Do this operation in the stop mode.  
Playback in a random order (Random playback)  
D-R350 (En)  
As tracks are selected at random, you can enjoy listening to  
for a long time.  
22  
÷Load a disc in the CD player.  
Preparation  
GRC operation  
: Complete the procedure in “Basic Operations  
for the Graphical Remote Control Unit (GRC)”  
90  
: Keys and control used in the operations described on this page.  
Check that the unit is in the normal play TRACK  
1
mode.  
!
2Press the RANDOM key.  
During track selection: ”>“ and ”<“ move from the outside to the inside.  
GRC operation  
Main unit operation  
<<<><E12 ><>>>  
«
The number here changes.  
RANDOM  
Mode  
ENTER  
RNDM005  
In case track No. 5 is selected  
Random  
ENTER  
÷Each time a track ends, the same operation as above is repeated, and  
the track selected next is played.  
÷Random play stops after all of the tunes have been played once.  
÷The random playback can also be repeated by pressing the REPEAT  
key.  
To select another track in the middle of playing one  
To cancel random playback  
RC operation  
GRC operation  
GRC operation  
Main unit operation  
Return  
RANDOM  
Mode  
ENTER  
¢
NET  
ENTER  
Random  
ENTER  
ENTER  
÷Pressing the 4key once returns to the beginning of the track being  
played.  
÷Press the RANDOM key to start normal playback.  
D-R350 (En)  
23  
Maintenance  
D-R350 (En)  
24  
Disc handling precautions  
Cleaning  
If fingerprints or foreign matter become  
attached to the disc, lightly wipe the  
disc with a soft cotton cloth (or similar)  
from the center of the disc outwards  
in a radial manner.  
Handling  
Hold compact discs so that you do not  
touch the playing surface.  
Label side  
÷Do not attach paper or tape to either  
the playing side or the label side of  
compact discs.  
Playing side  
Sticker  
÷The paste left on the label surface after  
a sticker has been peeled off is a factor  
which may cause malfunction. If the  
surfaceisstickyduetoremainingpaste,  
be sure to clean it with alcohole before  
use.  
Storage  
When a disc is not to be played for a  
long period of time, remove it from the  
CD player and store it in its case.  
Sticky paste  
Never play a cracked or warped disc.  
Caution on disc used  
During playback, the disc rotates at high speed in the player.  
Therefore, to avoid danger, never use a cracked or deformed disc or a  
disc repaired with tape or adhesive agent.  
Do not use cleaning discs.  
Please do not use commercially available cleaning discs, they may dam-  
age the internal mechanism.  
Discs which can be played with this unit  
CD (12 cm, 8 cm) (CD-TEXT support), CDV (only the audio  
part)  
÷With CD-G (CD Graphics) discs, this unit can play only the audio.  
÷Please do not use discs which are not round because they may cause  
a malfunction.  
Cleaning  
Note related to transportation and movement  
Do not use volatile solvents such as alcohol, paint thinner, gasoline,  
or benzine, etc. to clean the cabinet. Use a clean dry cloth.  
Before transporting or moving this unit, carry out the following  
operations.  
Do not use contact cleaners because it could cause a malfunction.  
Be specially careful against contact cleaners containing oil, for they  
may deform the plastic components.  
1. Turn the unit ON but do not load a disc.  
2. Wait a few seconds and verify that the display shown appears.  
NO DISC  
3. Press the 0 OPEN/CLOSE key to open the disc tray completely.  
4. Press the 0 OPEN/CLOSE key again to close the tray.  
5. Wait a few seconds and set the unit to STANDBY mode.  
CD accessories  
The CD accessories (stabilizer, protection sheet, protection ring, etc.)  
which are marketed for improving the sound quality or protecting discs  
as well as the disc cleaner should not be used with this system be-  
cause they may cause malfunction.  
Beware of condensation  
Be especially careful in the following conditions:  
÷When the unit is brought from a cold place to a warm place, and there  
is a large temperature difference.  
When water vapor comes into contact with the surface of cold mate-  
rial, water drops are produced. If condensation occurs, correct opera-  
tion may not be possible, or the unit may not function correctly.  
This is not a malfunction, however, the unit should be dried.  
÷When a heater starts operating.  
÷When the unit is brought from an air - conditioned place to a place of  
high temperature with high humidity.  
To do this, turn the unit ON and leave the unit as it is for several hours.  
÷When there is a large difference between the internal temperature of  
the unit and the ambient temperature, or in conditions where  
condensation occurs easily.  
In case of difficulty  
D-R350 (En)  
What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the  
table below to see if the problem can be corrected before seeking help from your dealer or service representative.  
25  
Operation to reset  
The microcomputer may fall into malfunction (impossibil-  
Unplug the power cord from the power socket and plug  
ity to operate, erroneous display, etc.) when the connec-  
the power cord into the socket again.  
tion cords are unplugged while unit is ON or due to an  
external factor. In this case, execute the following method  
to reset the microcomputer and return it to normal condi-  
tion.  
÷Please be aware that resetting the CD player will erase all stored  
information and return it to the factory settings.  
CD player unit  
Symptom  
Cause  
Remedy  
÷Insert the power plug firmly to the AC outlet.  
÷Turn the amplifier’s power ON.  
÷Power plug is loosely connected.  
÷Withthepowerplugconnectedtotheswitched  
AC outlet of an amplifier, the power of the  
amplifier is turned off.  
The unit is not turned ON with the  
POWER key ON. (For U.S.A. and Canada)  
The unit is not turned ON with the ON/  
STANDBY(  
tries)  
) key ON. (For other coun-  
÷Disc is loaded upside down.  
÷Disc is loose.  
Disc is loaded, player does not play.  
÷Load the disc again with its label side up.  
÷Insert the disc properly.  
÷Disc is dirty.  
÷Wipe off the dust on the surface of the disc  
referring to ”Disc handling precautions“.¢  
÷Replace the disc with a new one.  
÷Disc is cracked.  
÷Condensation has occurred on the optical lens  
÷Leave the player for about 1 hour so that the  
unit.  
condensation is removed.  
¢
No sound.  
÷Play mode is not entered.  
÷Press the 6key.  
÷Disc is too dirty.  
÷Wipe off the dust on the disc surface referring  
to ”Disc handling precautions“.  
÷Replace the disc with a new one.  
÷Connect all connection cords firmly.  
¢
÷Disc is cracked.  
÷The connection cords are inserted loosely.  
Music is interrupted. (Sound is skipped.)  
÷Disc is too dirty.  
÷Wipe off the dust on the disc surface referring  
to ”Disc handling precautions“.  
¢
÷Disc is cracked.  
÷Oscillation is applied to this unit.  
÷Replace the disc with a new one.  
÷Try selecting a place where no strong vibra-  
tions occur by changing the installation place,  
etc.  
D-R350 (En)  
26  
For the U.S.A.  
CAUTION:  
Use of controls or adjustment or performance of procedures other than  
those specified herein may result in hazardous radiation exposure.  
In compliance with Federal Regulations, following are reproductions  
of labels on, or inside the product relating to laser product safety.  
KENWOOD CORPORATION  
2967-3, ISHIKAWA-CHO, HACHIOJI-SHI,  
TOKYO, JAPAN  
KENWOOD CORP. CERTIFIES THIS EQUIPMENT  
CONFORMS TO DHHS REGULATIONS NO. 21  
CFR 1040.10, CHAPTER I, SUBCHAPTER J.  
Location: Back Panel  
Specifications  
D-R350 (En)  
[ Format ]  
System ......................................................................... Compact disc digital audio system  
Laser ..................................................................................................... Semiconductor laser  
27  
[ D/A Convertors ]  
D/A Conversion ............................................................................................ 1 Bit (D.R.I.V.E.)  
Oversampling ................................................................................................8 fs (352.8 kHz)  
[ Audio ]  
Frequency response.......................................................................... 4 Hz – 20 kHz, 0.5 dB  
Signal to noise ratio................................................................................. More than 100 dB  
Dynamic range ........................................................................................... More than 93 dB  
Total harmonic distortion + noise ..........................................Less than 0.005% (at 1 kHz)  
Channel separation ................................................................... More than 93 dB (at 1 kHz)  
Wow & flutter .......................................................................................Unmeasurable Limit  
Output level/impedance  
Variable ......................................................................................................1.2 V/0.68 kΩ  
Digital output  
Coaxial ..................................................................................................... 0.5 V p-p/75 Ω  
Optical........................................................................................... –15 dBm – –21 dBm  
(Wave length 660 nm)  
[ General ]  
Power consumption....................................................................................................... 14 W  
Dimensions .........................................................................................W: 400 mm (15-3/4")  
H: 139 mm (5-1/2")  
D: 429 mm (16-7/8")  
Weight (Net) ...................................................................................................5.3 kg (11.7 lb)  
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.  
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).  
NNootteess  
For the U.S.A.  
FCC WARNING:  
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the  
modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change  
or modification is made.  
NOTE:  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to  
radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur  
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  
– Reorient or relocate the receiving antenna.  
– Increase the separation between the equipment and receiver.  
– Connect the equipment into an outlet on a circuit different from that to which the receiver in connected.  
– Consult the dealer or an experienced radio/TV technician for help.  
For your records  
Record the serial number, found on the back of the unit, in the spaces  
designated on the warranty card, and in the space provided below. Refer  
to the model and serial numbers whenever you call upon your dealer for  
information or service on this product.  
Model  
Serial Number  

Morphy Richards 28024 User Manual
Memorex MMG CR3810 User Manual
Marantz DR6050 User Manual
La Crosse Technology WT 2150A User Manual
Jabra LINK 280 User Manual
Insignia NS CLVR01 User Manual
HP Hewlett Packard HD1600 User Manual
Gigabyte GA 7VA User Manual
Dualit Espressivo Coffee Machine User Manual
DeLonghi EC9 UK User Manual