CD-RECEIVER
KDC-V7017
KDC-716S
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the
best performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on
the warranty card, and in the space provided below. Refer to the model and serial
numbers whenever you call upon your KENWOOD dealer for information or service on
the product.
Model KDC-V7017/716S Serial number
©B64-1893-00 (KW)
Contents
2Warning..............................................................3
Safety precautions................................................4
Handling Compact discs.......................................6
Menu settings
Menu System .............................................................................22
Security Code..............................................................................22
Touch Sensor Tone.....................................................................23
Manual Time Adjustment............................................................24
Selectable Illumination................................................................24
Switching Graphic Display ..........................................................24
Variable Illumination Color Setting..............................................24
Contrast Adjustment...................................................................25
Dimmer .......................................................................................25
Time setting for removing the faceplate ....................................25
Clean Reception System Circuit (CRSC) ....................................25
Text Scroll ...................................................................................26
General features
Power............................................................................................8
Switching Modes..........................................................................8
Volume..........................................................................................9
Attenuator .....................................................................................9
System Q....................................................................................10
Audio Control Setting..................................................................10
Loudness ....................................................................................11
Speaker Setting...........................................................................11
Clock display ...............................................................................11
Faceplate Angle Adjustment.......................................................11
Forced Closing ............................................................................12
Removing the Faceplate .............................................................12
Basic Operations of remote................................26
Installation
Accessories.................................................................................29
Installation Procedure .................................................................29
Connecting Wires to Terminals ..................................................30
Locking the faceplate to the unit................................................31
Installation (non-Japanese cars)..................................................31
Removing the Unit......................................................................32
Installation (Japanese-cars).........................................................33
Tuner features
Tuning .........................................................................................14
Station Preset Memory...............................................................14
Auto Memory Entry ....................................................................14
Switching Display for Tuner........................................................15
Station Name Preset (SNPS) ......................................................15
Troubleshooting Guide .......................................34
Specifications.....................................................38
CD/External disc control features
Playing CDs.................................................................................16
Playing Other Disc mode............................................................17
Switching Display for Discs ........................................................17
Fast Forwarding and Reversing Disc Play ..................................17
Track Search ...............................................................................18
Disc Search.................................................................................18
Track / Disc Repeat.....................................................................18
Track Scan...................................................................................18
Random Play...............................................................................19
Magazine Random Play...............................................................19
Presetting Disc Names (DNPS) ..................................................20
Disc Name Preset Play (DNPP) .................................................20
Text / Title Scroll .........................................................................21
— 2 —
2Warning
NOTE
2CAUTION
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
Use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous
radiation exposure.
In compliance with Federal Regulations,
following are reproductions of labels on, or
inside the product relating to laser product
safety.
reasonable protection against harmful
interference in a residential installation. This
equipment may cause harmful interference
to radio communications, if it is not installed
and used in accordance with the instructions.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
KENWOOD CORPORATION
2967-3, ISHIKAWA-CHO,
HACHIOJI-SHI
TOKYO, JAPAN
KENWOOD CORP. CERTIFIES THIS EQUIPMENT
CONFORMS TO DHHS REGULATIONS N0.21 CFR
1040. 10, CHAPTER 1, SUBCHAPTER J.
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
Location : Bottom Panel
• Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
FCC WARNING
This equipment may generate or use radio
frequency energy. Changes or modifications
to this equipment may cause harmful
interference unless the modifications are
expressly approved in the instruction manual.
The user could lose the authority to operate
this equipment if an unauthorized change or
modification is made.
NOTE
This Class B digital apparatus complies with
Canadian ICES-003.
— 3 —
Safety precautions
IMPORTANT INFORMATION
About the disc changer to be
2WARNING
2CAUTION
To prevent injury or fire, take the
To prevent damage to the machine,
take the following precautions:
• Make sure to ground the unit to a negative
12V DC power supply.
• Do not open the top or bottom covers of
the unit.
• Do not install the unit in a spot exposed to
direct sunlight or excessive heat or
humidity. Also avoid places with too much
dust or the possibility of water splashing.
• Do not subject the faceplate to excessive
shock, as it is a piece of precision
equipment.
• When replacing a fuse, only use a new one
with the prescribed rating. Using a fuse
with the wrong rating may cause your unit
to malfunction.
• To prevent a short circuit when replacing a
fuse, first disconnect the wiring harness.
• Do not place any object between the
faceplate and the unit.
• Do not use your own screws. Use only the
screws provided. If you use the wrong
screws, you could damage the unit.
• Do not apply excessive force to the moving
faceplate. Doing so will cause damage or
malfunction.
• Do not apply excessive force to the open
faceplate or place objects on it. Doing so
will cause damage or breakdown.
connected:
To connect a disc changer having the "O-N"
switch to this unit, set the "O-N" switch to
"N".
following precautions:
• Insert the unit all the way in until it is fully
locked in place. Otherwise it may fall out of
place when jolted.
When you connect a model with no "O-N"
switch, the converter cord CA-DS100
available as an option may be required. For
details, consult your Kenwood dealer.
If a model with no "O-N" switch is
connected, some unavailable functions and
information that cannot be displayed are
generated, such as the DNPS, DNPP,
Magazine random play, and CD Text display.
Note that none of the KDC-C100, KDC-C302,
C205, C705, and non-Kenwood CD changers
can be connected.
• When extending the ignition, battery, or
ground wires, make sure to use
automotive-grade wires or other wires with
2
a 0.75mm (AWG18) or more to prevent
wire deterioration and damage to the wire
coating.
• To prevent a short circuit, never put or
leave any metallic objects (such as coins or
metal tools) inside the unit.
• If the unit starts to emit smoke or strange
smells, turn off the power immediately and
consult your Kenwood dealer.
• Make sure not to get your fingers caught
between the faceplate and the unit.
• Be careful not to drop the unit or subject it
to strong shock.
The unit may break or crack because it
contains glass parts.
• Do not touch the liquid crystal fluid if the
LCD is damaged or broken due to shock.
The liquid crystal fluid may be dangerous to
your health or even fatal.
If the liquid crystal fluid from the LCD
contacts your body or clothing, wash it off
with soap immediately.
2CAUTION
You can damage both your unit and
the CD changer if you connect them
incorrectly.
Do Not Load 3-in. CDs in the CD slot
If you try to load a 3 in. CD with its adapter
into the unit, the adapter might separate
from the CD and damage the unit.
— 4 —
• The illustrations of the display and the
panel appearing in this manual are
examples used to explain more clearly how
the controls are used. Therefore, what
appears on the display in the illustrations
may differ from what appears on the
display on the actual equipment, and some
of the illustrations on the display may
represent something impossible in actual
operation.
• The functions that can be used and the
information that can be displayed will differ
depending on the external disc players
being connected.
Cleaning the CD Slot
NOTE
As dust tends to accumulate in the CD slot,
clean it every once in a while. Your CDs can
get scratched if you put them in a dusty CD
slot.
• If you experience problems during
installation, consult your Kenwood dealer.
• If the unit fails to operate properly, press
the RESET button. The unit returns to
factory settings when the RESET button is
pressed. If the unit still fails to operate
properly after the RESET button has been
pressed, contact your local KENWOOD
dealer for assistance.
• Press the reset button if the disc auto
changer is first controlled and operates
incorrectly. The original operating condition
will return.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get
dirty, wipe them with a dry, soft cloth.
Lens Fogging
Right after you turn on the car heater in cold
weather, dew or condensation may form on
the lens in the CD player of the unit. Called
lens fogging, CDs may be impossible to play.
In such a situation, remove the disc and wait
for the condensation to evaporate. If the unit
still does not operate normally after a while,
consult your Kenwood dealer.
Cleaning the Unit
If the faceplate of this unit is stained, wipe it
with a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the
stain off with a cloth moistened with neutral
cleaner, then wipe neutral detergent off.
Reset button
• We recommend the use of the Security
Code function (see p. 22) to prevent theft.
• Characters in the LCD may become difficult
to read in temperatures below 41 ˚F (5 ˚C).
2CAUTION
Applying spray cleaner directly to the unit
may affect its mechanical parts. Wiping the
faceplate with a hard cloth or using a volatile
liquid such as thinner or alcohol may scratch
the surface or erases characters.
— 5 —
Handling Compact discs
Playing a CD that is dirty, scratched
or warped can cause the sound to
skip and the unit to operate
incorrectly, resulting in worsened
sound quality. Take the following
precautions to prevent your CDs from
getting scratched or damaged.
Storing CDs
Checking New CDs for Burrs
When playing a new CD for the first time,
check that there are not any burrs stuck to
the perimeter of the disc or in the central
hole. CDs with burrs stuck on them may not
load properly or may skip while playing.
Remove burrs using a ballpoint pen or a
similar utensil.
• Do not store CDs in areas exposed to
direct sunlight (such as a car seat or the
dashboard) or other hot places. A CD-R or
CD-RW is more susceptible than a music
CD to damage from high temperatures and
humidity, and in some cases, may become
unusable if left in the car for long periods
of time.
• Remove CDs from the unit when not
listening to them for a while, and put them
back in their cases. Do not pile up CDs
that are removed from their cases or prop
them against something.
Handling CDs
• Do not touch the recorded side of the CD
(the side opposite the label) when holding
it.
Burrs
Burrs
Cleaning CDs
If a CD has gotten dirty, wipe it off gently
using a commercially available cleaning cloth
or a soft cotton cloth, starting from the
center of the disc and moving outward. Do
not clean CDs with conventional record
cleaners, anti-static formulas, or chemicals
such as paint thinner or benzene.
• The reflective film on a CD-R or a CD-RW is
more fragile than that on an ordinary music
CD, and may peel off if scratched. Fingerprints
on a CD-R or CD-RW are also more likely to
cause skipping when the disc is played. For
these reasons, handle the disc very carefully.
Detailed handling instructions will appear on
the CD-R or CD-RW package: read this
information carefully before using the disc.
• Do not stick tape on either side of the CD.
Tape
— 6 —
Do Not Load CD Accessories
Do not use commercially available CD
accessories that can be loaded into the CD
slot, such as stabilizers, protective sheets,
or CD cleaning discs, since they can cause
the unit to malfunction.
Do Not Use Special Shape CDs
• Be sure to use round shape CDs only for
this unit and do not use any special shape
CDs. Use of special shape CDs may cause
the unit to malfunction.
Do Not Use CDs with Sticker on the
Labeled Side
Do not use the CD with the label sticker
stuck on it.
Using such a CD may cause the CD to be
deformed and the sticker to peel off,
resulting in malfunction of the unit.
Removing the CD
Only remove the CD from the machine in a
horizontal direction, holding it flat. You may
damage the surface of the CD if you try
pulling it down as it ejects.
• Be sure to use CDs with disc mark
only for this unit.
•CD-Rs and CD-RWs which have not
undergone finalization processing cannot
be played. (For more information on
finalization processing, refer to the manual
for your CD-R/CD-RW writing software or
CD-R/CD-RW recorder.) Additionally,
depending on the recording status, it may
prove impossible to play certain CDs
recorded on CD-R or CD-RW.
— 7 —
General features
Power
M
L
Q/AUD SRC
CLK
FM
You can help prevent theft of the unit by reversing the
faceplate so that the control panel cannot be seen, hiding the
unit, and shutting off the audio.
Power ON/OFF:
When you turn your vehicle's ignition on, the unit's power will
also turn on, with the faceplate reversing to show the control
panel.
When you turn your vehicle's ignition off, the faceplate will
reverse to hide the control panel after a period of time which
you have set in the "Time setting for removing the faceplate" in
the menu. The unit's power will turn off.
Alternatively, you can remove the faceplate during that period.
For details, refer to the "Removing the faceplate" (page 12).
4
ATT / LOUD
ANG
AM
¢
KDC-V7017
NOTE
• When the moving faceplate is hit by an object, it will stop and
return to its original state. Remove the object and repeat the
action.
ATT indicator
Clock indicator
SYSTEM Q indicator
• The status of the security code function (page 22) is display
whenever the power is switched on.
"CODE ON" : Security code has been registered
"CODE OFF" : Security code has not been registered
2CAUTION
Using the Unit in Vehicles with Covered Consoles
• Make sure the console is uncovered while the faceplate is
reversed.
• Do not exert any excess force on the movable parts of the unit,
including the faceplate, as it can cause failure in the unit’s
mechanism.
Speaker Setting indicator
LOUD indicator
ATT indicator
KDC-716S
Clock indicator
SYSTEM Q indicator
Switching Modes
Switching Modes:
Each time you press the SRC (source) button, the mode
switches as follows:
Speaker Setting indicator
LOUD indicator
— 8 —
Volume
M
Tuner mode
Increasing Volume:
M
Press the L button to turn up the volume.
CD mode
M
Decreasing Volume:
External disc control mode 1
Press the M button to turn down the volume.
M
External disc control mode 2 / AUX mode
M
Standby mode
Attenuator
Selecting standby mode:
This function allows you to turn down the volume quickly.
Press the SRC button repeatedly and switch to "ALL OFF" .
When "ALL OFF" is displayed, the standby mode is activated.
The standby mode turns all functions off while leaving the
power to the unit on. Use this mode when you want to have
the display illuminated but don't want to listen to anything.
Turning Attenuator On/Off:
Press the ATT button to switch the attenuator on and off.
When the attenuator is on, the ATT indicator blinks.
When the attenuator is off, the volume returns to the original
level.
NOTE
NOTE
• The mode switches to the next mode from any mode which
cannot be used.
• The external disc control mode will differ depending on the unit
that is connected.
Turning the volume up, or turning it all the way down deactivates
the attenuator function.
• To enable the selection of External disc control mode 2/AUX
mode, you should connect optional switching adapter KCA-
S210A (which allows you to select both External disc control
mode 2 and AUX mode) or CD changer (KDC-CPS87, KDC-
CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) or
switching adapter CA-C1AX (which allows you to select AUX
mode only).
During the AUX mode, "AUX" (or AUX-name display) will show
in the display. When the CA-C1AX is being used, the AUX
Mode will replace the External Disc Control Mode.
NOTE
Selecting AUX-name display
Pressing the DISP button for at least two seconds during the AUX
mode, AUX-name display is blinked for AUX-name selection mode.
Pressing 4 or ¢ button during this mode allows you to select
"AUX" , "TV" , "VCP" , "GAME" or "PORTABLE" in the AUX mode.
The AUX-name selection mode can be exited by pressing the DISP
button or doing nothing for 10 seconds.
— 9 —
General features
Pressing the FM button advances the display, and pressing the
AM button reverses it.
System Q
You can recall the best audio setting preset for different types
of the music.
Volume Offset
Fader
Bass
Switching the Preset Sound Setting:
Each time you press the Q button, the preset sound setting
switches as follows:
Middle
Treble
Balance
Scan of Flat – Easy
Easy
Jazz
Pops
NOTE
Source tone memory
(Default setting)
Each source (CD, FM, AM and disc changer) has its own memory
in which to store the bass, middle, and treble tone settings.
The settings made for a particular source are recalled
automatically whenever you use that source (for example, FM
mode uses the tone settings made for FM, AM for AM, etc.).
User memory*
*User memory:
Flat
The unit returns to the state
adjusted the last time with
the audio control setting feature.
Top 40
Rock
3 Adjust each mode
As you proceed, each indicator would go on.
NOTE
Press the 4/¢ button.
Look at the table to adjust the mode being displayed.
Adjustment
mode
Operation of Audio control button
The System Q function changes the values of the following
sound quality parameters:
4 button
¢ button
(Display)
Bass center frequency, bass level, bass quality factor, bass
extend, middle center frequency, middle level, middle quality
factor, treble center frequency, and treble level.
Note that some of these parameters cannot be controlled by the
audio control setting feature.
Bass ("Bass")
Bass increased.
Bass decreased.
Middle
Middle decreased.
Middle increased.
("MID"/"Middle")
Treble
Treble decreased.
Treble increased.
Their setting values are different depending on the setting of the
speaker setting mode.
("TRE"/"Treble")
Right channel emphasized.
Left channel emphasized.
Rear channel increased.
Balance("Balance")
Fader ("Fader")
Front channel increased.
Volume Offset
("VOL Offset"
/"V Offset")
The sound level of
each source decreased.
The sound level of
each source increased.
Audio Control Setting
Adjust various parameters of sound quality.
4 Press the AUD button to end the control mode.
NOTE
1 Press the AUD button for at least one second to enter the
control mode.
Determining the parameters in the audio control setting would
clear all the adjustments made in the System Q and they are
replaced with the values in the audio control setting.
2 Selecting mode
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change as follows:
— 10 —
Loudness
Faceplate Angle Adjustment
This function amplifies low and high tones when the volume is
You can adjust the faceplate angle for easy viewing.
turned down.
Sliding the faceplate:
The LOUD indicator lights up when the loudness function is
on.
Press the ANG button for at least one second.
Turning Loudness On/Off:
Press the LOUD button for at least one second to switch the
loudness on and off.
Speaker Setting
This function allows you to adjust the setting that is recalled
with the System Q, according to types of speakers.
NOTE
Do not apply excessive force to the faceplate under setting 2.
1 Press the SRC button repeatedly to select the standby mode.
"ALL OFF" is displayed when the standby mode is selected.
2 Press the Q button to enter the speaker setting mode.
3 Press either the 4 or ¢ button to select the type of
speaker. The setting switches as follows.
Off ("SP OFF") / For 6/6x9 in. speaker ("SP 6*9/6inch") /
For 5/4 in. speaker ("SP 5/4inch") /
For the OEM speaker ("SP O.E.M.")
4 Press the Q button to end the speaker setting mode.
NOTE
Speaker setting function allows for tuning of bass, middle and
treble
Clock display
Changing the Clock Display:
Press the CLK button to switch the clock display on and off.
NOTE
The clock indicator lights while the clock is displayed.
— 11 —
General features
Forced Closing
Removing the Faceplate
This function prevents tampering with the unit your car is
being serviced etc.
The faceplate can be detached from the unit, helping to deter
theft.
Hiding the unit with the ignition turned on (forced closing):
Press the SRC button for at least one second.
Removing the faceplate:
1
Choose the way from among the following and open the
The faceplate will slide open. When the period of time which
you have set in the "Time setting for removing the faceplate" in
the menu has passed, the faceplate automatically reverses to
hide the control panel. However, you can remove the faceplate
during that period. For details, refer to the "Removing the
faceplate" (page 12).
faceplate.
Turn the ignition off, press the SRC button for at least one
second when the control panel has been hidden.
2 Holding the center part of the faceplate, pull it out during the
period which you have set in the "Time setting for removing
the faceplate" (page 25) in the menu.
NOTE
The faceplate bracket will automatically close.
• When the closing faceplate is hit by an object, the unit will turn
off without the faceplate closing all the way. Remove the object
and press the SRC button to turn the unit back on, then turn it
off again to have it close properly.
• Do not try to press the buttons on the control panel as the
faceplate is moving, as excessive force may damage the unit.
• During the forced closing of the unit (i.e., having the unit left
closed while ignition is turned on), the faceplate will not open
no matter how often the ignition is turned on or off.
2CAUTION
You can prevent tampering of the unit when letting someone
else drive your car by keeping it closed this way.
• When removing the faceplate, pull it out only when it is fully
open. The detachment of the faceplate while it is moving might
result in damage to the unit.
• Do not apply excessive force to the faceplate bracket without
attaching the faceplate. Doing so will cause the faceplate
bracket to be deformed.
To cancel the forced closing of unit and open control panel:
Press the left part at the upper side of the faceplate.
The faceplate will open and show the control panel.
• Do not touch the connector on the faceplate bracket after
removing the faceplate. Touching the connector may cause
damage to the unit.
NOTE
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the faceplate
in its special storage case while detached.
• Do not expose the faceplate or its storage case to direct
sunlight or excessive heat or humidity. Also avoid places with
too much dust or the possibility of water splashing.
Reattaching the Faceplate:
— 12 —
Tuner features
SRC
FM
38
1 Hold the faceplate so that the control panel faces the front
toward you and set the left side of the faceplate in the
faceplate bracket.
2CAUTION
Do not set the right side of the faceplate in the faceplate bracket
first, when reattaching the faceplate. Doing so may cause the
connector on the faceplate bracket to malfunction.
2 Press the right side of the faceplate until it locks.
4
#1 – 6
AUTO DISP /
/AME NAME.S
AM
¢
KDC-V7017
Band display
Frequency
Preset station number
ST indicator
AUTO indicator
KDC-716S
Band display
Frequency
Preset station number
ST indicator
AUTO indicator
— 13 —
Tuner features
received.
Tuning
You can choose from three tuning modes: auto seek, preset
station seek, and manual. The AUTO 1 indicator lights up
when auto seek tuning is selected, and the AUTO 2 indicator
lights when preset station seek tuning is selected.
Station Preset Memory
Store the frequency of a station. You can then recall that
Selecting Tuning Mode:
station with a single touch of a button.
Press the AUTO button.
Each time you press the AUTO button, the mode switches as
follows.
1 Select the band/station that you want to have stored.
2 Press the button (#1-6) that you want to use for the station, for
at least two seconds.
M
Auto 1 (Auto Seek Tuning)
The button number blinks once in the display to indicate that
the data has been stored.
M
Auto 2 (Preset Station Seek Tuning)
M
Recalling a Preset Station:
Manual (Manual Tuning)
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
Tuning:
NOTE
1 Press the SRC (source) button repeatedly to select the tuner
mode. "TUNER" is displayed when the tuner mode has been
selected.
You can store six stations in each of the FM1, FM2, FM3, and
AM bands.
2 Press either the FM or AM button to select the band.
Each time you press the FM button, the band switches
between the FM1, FM2 and FM3 (which are used for groups
of preset stations).
Auto Memory Entry
Press the AM button to select the AM band.
You can automatically store all the receivable frequencies in
the band currently being listened to, and then recall them with
the touch of a button later. This function is especially useful
when you are travelling and do not know what stations are
available. Up to six frequencies can be stored this way.
3 • Auto Seek Tuning
Press the ¢ button to seek higher frequencies.
Press the 4 button to seek lower frequencies.
• Preset station seek tuning
Press the ¢ button to move to the next preset station (i.e.,
the one with the next highest number), and the 4 button to
move to the last preset station (i.e., the one with the next
lowest number).
1 Select the band for auto memory entry.
2 Press the AME button for at least two seconds to start auto
memory entry.
• Manual Tuning
The numbers of the preset station buttons are shown in order.
When all the stations in a certain band are stored in the preset
memory, the auto memory entry stops. The tuner then plays
the last station received.
Press the ¢ button to increase the frequency by one step.
Press the 4 button to decrease the frequency by one step.
NOTE
The ST indicator lights up when stereo broadcasts are being
Recalling a Preset Station:
— 14 —
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
Characters that can be displayed are as follows.
Alphabet (upper case): A ~ Z
Alphabet (lower case): a ~ z
Switching Display for Tuner
Numerals and symbols: 0~9 @ ” ‘ ` % & * + - = , . / \ < > [ ]
You can change the display used when listening to the radio.
Special characters: á à é è íìó ò ú ù Ñ Ç ® ß ‹fl
îï ô ö û ü ñ ç © Æ › fi
â ä ê ë
Changing the Display:
Each time you press the DISP button, the display changes as
follows:
5 Continue steps 3 and 4 until all the characters are chosen for
the name.
NOTE
Station frequency
SNPS name (only when being preset)
You can enter up to eight characters for each name.
6 Assigning Names
Press the NAME.S button.
The name of the station is stored in memory, and the Station
Name Preset mode ends.
Also, if you make no input for 10 seconds, the name will be
stored up to the point that you have entered, and the mode
ends.
Station Name Preset (SNPS)
You can assign names to radio stations with the Station Preset
Memory. Up to 32 FM stations and 16 AM stations can be
assigned names.
NOTE
• You can assign names to up to 32 FM stations and 16 AM
stations.
• All the station names will be erased if you press the Reset
button.
• If you want to change the name of a station, first display the
name of the station (following steps 1 and 2 above), then
change the letter(s) that you want by following steps 3 and 4.
1 Adjust the frequency to the station whose name you want to
enter.
2 Press the NAME.S button for at least two seconds.
"NAME SET" is displayed once the station name preset mode
is entered.
The cursor will blink in the position where letters are entered.
3 Press either the 4 or ¢ button to move the cursor to the
desired position.
The 4 button moves the cursor to the left, and the ¢
button to the right.
4 Each time the 38 button is pressed, the characters to be
entered change as listed below.
Press the FM or AM button to display the desired character.
— 15 —
CD/External disc control features
38 SRC
0
DISC+
Playing CDs
Playing CDs:
Press the 0(EJECT) button to slide open the faceplate,
showing the CD (insertion) slot. Holding the CD with the
labeled side facing up, insert it in the slot. The faceplate will
close, and the CD will start playing.
The IN indicator will light when a CD has been inserted.
Playing CDs Already Inserted:
Press the SRC button repeatedly to select the CD mode.
"CD" is displayed when the CD mode has been selected.
The CD will start playing.
4
SCAN RDM REP
M.RDM DISP /
NAME.S
DISC– ¢
Pausing and Restarting CD Play:
Press the 38 button to make the disc pause.
Press the same button again to start play again.
KDC-V7017
Eject:
Track number
Track time
Press the 0(EJECT) button. The faceplate will slide to eject the
CD.
Press the 0(EJECT) button to close the faceplate.
2CAUTION
• Do not attempt to insert a CD into the slot if another one is
already there.
• The unit can only play 5 in. CDs. If you insert a 3 in. CD, it will
get stuck inside and can cause the unit to malfunction.
• When the faceplate has been slid open, it might interfere with
the shift lever or something else. If this happens, pay attention
to safety and move the shift lever or take an appropriate action,
then operate the unit.
Disc number
IN indicator
KDC-716S
NOTE
Track time
Track number
• The sound will be temporarily muted while the faceplate is
moving.
• When you load a CD and eject it right away, the next time you
try to insert the CD may not load. In such a situation, take the
CD out for a moment and then reinsert it.
IN indicator
Disc number
— 16 —
Playing Other Disc mode
This function permits the connection of optional players and
the playing of discs other than the loaded CD (in the current
unit).
Track time
Disc name (DNPS) (only when being preset)
Disc title (Units featuring CD text/MD only)
Track title (Units featuring CD text/MD only)
Playing Discs:
Press the SRC button repeatedly to select the external disc
control mode.
The disc will start playing.
NOTE
NOTE
• You can give names to discs through the presetting disc name
function (page 20). Note that depending on the unit, display
may not be possible.
The external disc control mode will differ, depending on the unit
that is connected.
Mode Display Examples
• If you try to display the name of a disc that does not have one,
"NO NAME" is displayed instead.
• "CD2" ...when a CD player is connected
• "DISC" ...when a disc changer is connected
• "DISC1" , "DISC2" ...when two disc changers are connected
• When there is an attempt to display the title of a disc for which
the disc title/track title has not been recorded, "NO TEXT" is
displayed for CD and "NO TITLE/NO NAME" is displayed for
MD.
• If you attempt to display disc title/track title when connecting
the CD changer not supported for CD text feature, caution
messages such as "NO TEXT" or "Reading" may be displayed.
• Depending on the type of characters of the CD Text, some
characters may not be displayable.
Pausing and Restarting Disc Play:
Press the 38 button to make the disc pause.
Press the same button again to start play again.
NOTE
• When one disc has finished playing its last track, the next disc
in the changer will start playing. When the last disc in the
changer has finished, the player will return to the first disc and
start playing it.
• Disc #10 is displayed as "0".
Fast Forwarding and Reversing Disc Play
Fast Forwarding Disc Play:
Hold down on the ¢ button.
Switching Display for Discs
Switch the display that appears while discs are playing.
Release your finger to play the disc at that point.
Reversing Disc Play:
Switching Display for Discs:
Hold down on the 4 button.
Release your finger to play the disc at the point.
Each time you press the DISP button, the display during disc
play switches as follows:
NOTE
You cannot use reverse play between tracks depending on the
model being connected. Instead, the reverse play function is
canceled when it reaches the beginning of a track, at which point
normal play will automatically resume.
— 17 —
CD/External disc control features
Play starts at the beginning of the displayed disc.
NOTE
Track Search
Search forward or backward through the tracks on the disc
until you reach the one that you want to listen to.
"Load" is displayed when discs are being exchanged on the disc
changer.
Making a Reverse Track Search:
Press the 4 button to display the desired track number.
Press once to search back to the beginning of the current
track, twice to search back to the beginning of the previous
track, and so forth.
Track / Disc Repeat
Repeat playing the track or the disc currently being listened to.
Play starts at the beginning of the displayed track number.
NOTE
(For disc changers)
Turning Repeat Play On/Off:
Pressing the 4 button while listening to track 1 will only search
back to the beginning of that track. The reverse search is not
"recycled" to the last track on the disc.
Press the REP button to switch repeat track/disc play on and
off as follows:
M
Making a Forward Track Search:
Track Repeat ON
Press the ¢ button to display the desired track number.
Press once to fast forward to the next track, twice to fast
forward to the track after that, and so forth.
M
Disc Repeat ON (Function of disc changers)
M
Repeat OFF
Play starts at the beginning of the displayed track number.
NOTE
(For disc changers)
"Repeat ON" / "T-Repeat ON" is displayed and the track number
blinks in the display when track repeat is on.
"Disc Repeat ON" / "D-Repeat ON" is displayed and the disc
number blinks in the display when disc repeat is on.
You cannot make a forward track search when listening to the
last track on a disc.
NOTE
Repeat play is canceled when you eject the disc.
Disc Search
(Function of disc changers)
Search forward or backward through the discs in a disc
changer.
Making a Reverse Disc Search:
Track Scan
Press the DISC– button to display the desired disc number.
Each time the button is pressed, the displayed disc number
decreases by one.
Successively play the beginning of each track on a disc until
you find the track that you want to listen to.
Play starts at the beginning of the displayed disc.
Starting the Track Scan:
Press the SCAN button. "Scan ON" is displayed and the first 10
seconds of each track will be played, in order.
The track number currently being heard blinks in the display.
Making a Forward Disc Search:
Press the DISC+ button to display the desired disc number.
Each time the button is pressed, the displayed disc number
increases by one.
Stopping to Listen to the Track Being Scanned:
— 18 —
Press the 38 or SCAN button again to stop the scan and keep
turned on.
on listening to a track normally.
The disc and track numbers will change over and over in the
display as the next track is being selected.
When the disc/track has been selected, play will begin.
The selected disc/track number blinks in the display as it is
being played.
NOTE
• The track scan function is canceled when you eject the disc.
• The track scan function only scans each track on a disc once.
2 To change the track being heard, press the ¢ button.
Another disc/track will be selected and played.
NOTE
Random Play
• Magazine random play is canceled when you eject the disc.
• The time needed for random selection depends on the number
of discs loaded in the disc magazine.
Play all the tracks on the current disc in random order.
1 Press the RDM button to switch random play on and off.
"Random ON" is displayed when random play is turned on.
The track number will change over and over in the display as
the next track is being selected.
When the track has been selected, play will begin.
The selected track number blinks in the display as it is being
played.
NOTE
(For disc changers)
When all the tracks on a certain disc have been played using
random play, the next disc on the changer will start playing using
the same function.
2 To change the track being heard, press the ¢ button.
Another track will be selected and played.
NOTE
Random play is canceled when you eject the disc.
Magazine Random Play
(Function of disc changers)
Play the tracks on all the discs in the disc changer in random
order.
1 Press the M.RDM button to switch magazine random play on
and off.
"M.Random ON" is displayed when magazine random play is
— 19 —
CD/External disc control features
Presetting Disc Names (DNPS)
Store the names of discs to be displayed when played.
6 Press the NAME.S button.
The disc name is stored and the disc name preset mode is
canceled.
If you make no entry in a 10-second period, the name will be
stored with the characters input so far.
1 Play the disc whose name you want to preset.
NOTE
NOTE
• This function is not available for disc changers that do not
feature the Disc Name Preset function.
• The number of discs whose names can be stored will differ
depending on the disc changer that is connected. Please see
your disc changer manual for details.
• The disc name preset function cannot be used when the
Magazin random play and disc title or track title is displayed.
Up to 30 CDs can be registered with this unit.
2 Press the NAME.S button for at least two seconds.
• Discs are identified by their total length and number of tracks. If
another disc happens to have the same specifications as one
that you have already stored a name for, the name will be
displayed for it, too.
"NAME SET" is displayed and the disc name preset mode is
entered.
The cursor blinks in the position where character input can be
made.
• If you want to change the name of a disc, repeat steps 1 and 2
to display the name, and then repeat steps 3 and 4 to input the
changes.
• Pressing the reset button erases the disc names stored in this
unit, but does not erase the names stored in a disc changer.
3 Press either the 4 or ¢ button to move the cursor to the
desired position.
The 4 button moves the cursor to the left, and the ¢
button to the right.
4 Each time the 38 button is pressed, the characters to be
entered change as listed below.
Press the DISC+ or DISC– button to display the desired
character.
Disc Name Preset Play (DNPP)
Characters that can be displayed are as follows.
(Function of Remote)
Alphabet (upper case): A ~ Z
If you have preset the name of a disc that you want to listen to
in the disc changer, you can look for it by name and start
playing it.
Alphabet (lower case): a ~ z
Numerals and symbols: 0~9 @ ” ‘ ` % & ∗ + - = , . / \ < > [ ]
Special characters: á à é è íìó ò ú ù Ñ Ç ® ß ‹fl â ä ê
1 Press the DNPP button on the remote.
"DNPP" will appear in the display, and the disc name preset
play mode is entered.
ë
î ï ô ö û ü ñ ç © Æ › fi
The names of all the discs in the disc changer will appear
successively in the display for five seconds each.
Discs whose names have not been preset will appear as "NO
NAME" in the display.
5 Continue steps 3 and 4 until all the characters are chosen for
the name.
NOTE
NOTE
• This function can only be used in disc changers that were
manufactured or sold as of 1997. Also note that some units
You can enter up to 12 characters for each name.
— 20 —
cannot provide a display unless the disc name preset has been
made by the unit that is playing.
Text / Title Scroll
This function permits the text to be scrolled and the entire text
to be displayed. The scrolling method differs depending on the
setting of scrolling in the menu.
• Discs in the disc changer that have never been played before
will appear as "NO ACCESS" when the disc names are
displayed. When you cannot identify a disc because of the "NO
ACCESS" display after inserting a disc magazine, try playing it to
display the disc name. Also note that "NO DISC" will be
displayed when a disc has not been loaded.
To scroll automatically:
Press the DISP button to display the disc title or the track title.
The display of the text will be scrolled repeatedly.
Rapid display (forward / reverse):
To scroll manually:
1 Press the DISP button to display the disc title or the track title.
Press the DISC+ or DISC– button.
Pressing the DISC+ button will rapidly display the preset
names/disc titles in order.
2 Pressing the DISP button for at least one second results in one
Pressing the DISC– button will rapidly display the preset
names/disc titles in reverse order.
scrolling display of the titles.
NOTE
2 When the name appears for the disc you want to play
Press the OK button.
• Please see the menu settings (page 26) about switching
between manual scrolling and automatic scrolling.
• You cannot use the text scroll function during magazine random
play.
The disc whose name is displayed will be recalled, and the disc
name preset play (DNPP) mode will end.
To cancel DNPP mode:
Press the DNPP button.
The disc name preset play (DNPP) mode will be canceled.
— 21 —
Menu settings
38
SRC MENU
FM
Menu System
You can set the defaults for additional functions in the menu
mode. Make a setting for each function, referring to the
following operations.
1 Enter the menu mode
Press the MENU button for at least one second.
"MENU" is displayed when the menu mode is entered.
The function that you can adjust is indicated with the current
settings displayed.
2 Selecting function to set
Press the FM button to search through the functions until you
see the one you want to adjust in the display.
Press the AM button to search through the functions
backward.
4
DISP
AM
¢
#1 – 5
KDC-V7017
Function items change in the order of features that follow in
the menu system.
Menu display
Example: If you want to switch the setting of the touch sensor
tone function from on to off, first search through the
functions until you see "Beep ON" in the display.
3 Changing setting for currently displayed function
Press either the 4 or ¢ button.
The setting will change for each function.
Example: The setting of the touch sensor tone will switch from
on to off, and "Beep OFF" is displayed.
4 Ending the menu mode
Press the MENU button.
NOTE
KDC-716S
Make sure to end the menu mode when finished.
Menu display
Security Code
When the battery is removed from the unit's power switch,
you cannot turn on the unit again unless the preset security
code is input. This function helps prevent theft.
NOTE
— 22 —
You must follow steps 1 to 8 to be able to use the Security Code
function. Turning off the power during the procedure will
deactivate the security code setting.
Once the security code function has been activated, "Security"
disappears from the MENU system. Note that it will no longer be
possible to cancel this function afterwards.
code.
7 Press the Preset button and input the security code again.
8 Press the DISP button again for at least three seconds.
"APPROVED" will appear in the display, with the security code
function turning on. From this point on, if the unit is
disconnected from the battery, the security code must be
entered the first time that the unit's power is turned on.
"ENTER" and "CODE" will appear in the display, asking you to
input the code.
1 Press the SRC button repeatedly to select the standby mode.
"ALL OFF" is displayed when the standby mode is selected.
2 Select the four digits to use in your security code.
NOTE
NOTE
The four-digit security code is very important, as you will need it
to turn the unit on again when the code security function is on.
Choose the number carefully and do not forget it (write it down
and keep it separately in a safe place).
If you input an incorrect security code, the code setting mode
will be canceled automatically. Follow the steps from 4 to 8
above again.
If you press the RESET button or remove the battery:
The first time you turn the unit on again, "CODE" will appear in
the display, asking you to input the security code.
Repeat steps 7 and 8 above, and input the security code.
You can start operating the unit again when "APPROVED"
appears in the display.
3 Press the MENU button for at least one second.
"MENU" is displayed first and then "Security" is displayed.
4 Press either the 4 or ¢ button for at least one seconds.
"ENTER" will appear in the display for one second, indicating
the code setting mode has been entered. When "CODE"
appears in the display, you can start inputting the code.
If you enter the incorrect code, the power will turn off. Enter
the correct code to turn the unit on.
5 Press the preset button and enter the security code that you
have selected in step 2.
Example: Use "3510" as the security code.
# Times
pressed
Touch Sensor Tone
This function produces a beep sound that accompanies button
operation. It can be switched on or off.
Step
Button to press
Display
1
2
3
4
#1
#2
#3
#4
4
“3”
“5”
“1”
“0”
6
2
1
Display and setting:
"Beep ON" : Beep setting is on. (Default setting)
"Beep OFF" : Beep setting is off.
NOTE
The beep sound is not output from the preout jacks.
6 Press the DISP button for at least three seconds.
The security code will be set.
"RE-ENTER" will appear in the display for one second, asking
you to enter the code once again for confirmation. When
"CODE" appears in the display, you can start inputting the
— 23 —
Menu settings
Manual Time Adjustment
Switching Graphic Display
Adjust the time manually.
This function allows you to turn off the lower part of the
display if there is too much information in the display.
Display and setting:
Display and setting:
1 Select the display "Clock Adjust" during the selecting function
"Graphic ON" : The display will turn on by using the whole part
of the display. (Default setting)
in the menu system.
2 Press either the 4 or ¢ button for at least one second to
enter the Manual time adjustment mode.
The time display will blink.
"Graphic OFF" : The display will turn on by using only the upper
part of the display and the IN indicator.
3 • Adjusting the hours
Press the FM button to advance the hours, or press the AM
button to make the hours go back.
• Adjusting the minutes
Function of the KDC-V7017
Variable Illumination Color Setting
You can set the display to a desired color.
Press the ¢ button to advance the minutes, or press the
4 button to make the minutes go back.
4 Press the MENU button to end the Manual Time Adjustment
mode.
Display and setting:
Exiting the Manual Time Adjustment mode would start the
clock counting.
1 Select the display "Color" during the selecting function in the
menu mode.
2 To set s color manually:
Hold down on the 4 or ¢ button.
Pressing the ¢ button advances the color, and pressing the
4 button reverses it.
Selectable Illumination
You can switch the color of the button illumination between
green and red.
When the desirable color is appeared, release the button.
3 To make the popular colors appear:
Press the preset button (#1-4) for the desired color.
Display and setting:
The buttons #1-4 is preset for the following four colors:
"Button Green" : The color of the illumination is green.
"Button Red" : The color of the illumination is red.
#1: White
#2: Red
#3: Blue
#4: Blue Green
4 To switch colors depending on the situation:
(Situational Mode)
Each time you press the #6 button, the mode switches as
follows:
— 24 —
M
Dimmer
You can dim the display.
Scan Mode
M
SRC Mode
NOTE
(Changing colors depending on the source being played)
The dimmer function is not available for units if the dimmer wire
is not connected.
M
Time Mode
Display and setting:
(Color changes every six hours)
M
"Dimmer ON" : The dimmer setting is on. (Default setting)
"Dimmer OFF" : The dimmer setting is off.
Situational Mode off
When Situational Mode is off, the original color setting
resumes.
5 To finely adjust blue: (Blue Adjust Mode)
Press the #3 button for at least two seconds to enter the
blue adjust mode.
Time setting for removing the faceplate
You can set the interval during which the open control panel
cannot reverse to be hidden. During the period you have set,
the faceplate can be removed from the faceplate bracket.
The 4 and ¢ buttons are used to adjust the blue color
tones, respectively.
Press the #3 button to end the blue adjust mode.
Display and setting:
"Off Wait" : 0s / 3s (Default setting) / 5s / 10s / 15s / 20s / 25s
(s=seconds)
6 To store the color setting in the memory:
(color preset memory)
After adjusting the illumi colors, press the #5 button for two
seconds to store the color setting in the memory.
Pressing the #5 button again recalls the stored colors from the
memory.
Clean Reception System Circuit (CRSC)
<In FM reception of Tuner mode>
Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
NOTE
Blue Adjust mode setting can’t do memory
7 Press the MENU button to end the Variable Illumination Color
Setting mode.
Display and setting:
"CRSC ON" : The CRSC is on. (Default setting)
"CRSC OFF" : The CRSC is off.
Contrast Adjustment
NOTE
This adjustment permits easy viewing of the display.
Strong electrical fields (such as from power lines) may cause
unstable sound quality when CRSC is turned on. In such a
situation, turn it off.
Display and setting:
"Contrast 0" – "Contrast 10"
NOTE
The initial setting value is "5".
— 25 —
Menu settings
Basic Operations of remote
Text Scroll <In External disc control mode>
This function permits the CD text and MD title to be scrolled
and the entire text to be displayed. Switching between manual
scrolling and automatic scrolling is permitted.
Display and setting:
"Scroll Auto" : Automatic scrolling (Default setting)
"Scroll Manual"/"Scroll MANU" : Manual scrolling
+
SRC
+
SRC
—
TUNE /4/TRACK
TUNE +/¢/TRACK +
38
4
FM/DISC +
¢
TUNE
TRACK
FM
+
ATT
DSIC
38
AM
—
AM/DISC
DNPP/
SBF
OK
DNPP
OK
REMOTE CONTROL UNIT
— 26 —
2CAUTION
Basic operations
Do not set the remote on hot places such as above the
dashboard.
• VOLUME buttons
Press the + button to turn the volume up.
Loading and Replacing the Batteries:
Use two "AAA"-size batteries.
Press the – button to turn the volume down.
• SRC button
Slide the cover while pressing downwards to remove it as
illustrated.
Each time you press the SRC button, the mode switches as
follows:
Insert the batteries with the + and – poles aligned properly,
following the illustration inside the case.
M
Tuner mode
M
CD mode
M
External disc control mode 1
M
External disc control mode 2 / AUX mode
M
Standby mode
NOTE
2WARNING
• The mode switches to the next mode from any mode which
cannot be used.
Store unused batteries out of the reach of children. Contact a
doctor immediately if the battery is accidentally swallowed.
NOTE
• The external disc control mode will differ depending on the unit
that is connected.
• The provided batteries are intended for use in operation
checking, and their service life may be short.
• When the remote controllable distance becomes short, replace
both of the batteries with new ones.
• A portion of the operations may not be possible, depending on
the unit that is connected.
• To enable the selection of External disc control mode 2/AUX
mode, you should connect optional switching adapter KCA-
S210A (which allows you to select both External disc control
mode 2 and AUX mode) or CD changer (KDC-CPS87, KDC-
CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) or
switching adapter CA-C1AX (which allows you to select AUX
mode only).
During the AUX mode, "AUX" (or AUX-name display) will show
in the display.
When the CA-C1AX is being used, the AUX Mode will replace
the External Disc Control Mode.
ATT button
Turns down the volume quickly. To return the volume to its
original level, press the button again. Turning the volume up, or
turning it all the way down deactivates the attenuator function.
— 27 —
Basic Operations of remote
Tuner features
CD/External disc control features
• 4/¢ (TUNE) buttons
• 4/¢ buttons
Press the 4 button to make decreasing seeks (using the
preset tuning mode).
Press the 4 button to search through the tracks backward.
Press the ¢ button to search through the tracks forward.
Use to move the cursor while entering disc name.
Press the ¢ button to make increasing seeks (using the preset
tuning mode).
Use to move the cursor left or right during station name input.
• DISC buttons (for disc changers)
Press the DISC– button to search through the discs backward.
Press the DISC+ button to search through the discs forward.
Select numbers and symbols while entering disc name.
• AM/FM buttons
Press the AM button to select the AM band.
Press the FM button to select and switch between FM1, FM2,
and FM3 bands.
• 38 button
When a disc is playing, this button pauses the play.
Press the same button again to start play again.
Selects the type of characters at the time of entering the disc
name.
During station name input, selects digits and symbols.
• OK button
During station name input, stores the already input data in
memory and ends the input mode.
• OK button
NOTE
During disc name input, stores the already input data in memory
and ends the input mode.
Pressing the OK button during the tuner mode results the
frequency part of the display blinking. In such cases, press the
button again. It returns to the original display.
Selects disc during the disc name preset play mode.
• DNPP button (for disc changers)
Enters and cancels the Disc Name Preset Play mode.
• 38 button
Selects the type of characters at the time of entering the station
name.
— 28 —
Accessories
Installation Procedure
1. To prevent a short circuit, remove the key from the ignition and
External view
External view
......... Number of items
disconnect the - battery.
......... Number of items
2. Make the proper input and output wire connections for each unit.
3. Connect the speaker wires of the wiring harness.
4. Connect the wiring harness wires in the following order: ground,
battery, ignition.
5. Connect the wiring harness connector to the unit.
6. Install the unit in your car.
7. Reconnect the - battery.
1
2
3
7
.........1
.........1
8
9
0
R
.........1
.........2
.........1
8. Press the left part at the upper side of the faceplate once to
make the faceplate control panel appear.
.........1
.........1
2CAUTION
• If your car's ignition does not have an ACC position, connect
the ignition wires to a power source that can be turned on and
off with the ignition key. If you connect the ignition wire to a
power source with a constant voltage supply, as with battery
wires, the battery may die.
• If the console has a lid, make sure to install the unit so that the
faceplate will not hit the lid when closing and opening.
• If the fuse blows, first make sure the wires aren’t touching to
cause a short circuit, then replace the old fuse with one with
the same rating.
• Do not let unconnected wires or terminals touch metal on the
car or anything else conducting electricity. To prevent a short
circuit, do not remove the caps on the ends of the
unconnected wires or the terminals.
4
5
6
.........1
.........2
.........2
2CAUTION
• Connect the speaker wires correctly to the terminals to which
they correspond. The unit may be damaged or fail to work if
you share the - wires or ground them to any metal part in the
car.
Do not use any accessories other than those provided with your
unit. If you use other accessories, you may damage the unit.
• After the unit is installed, check whether the brake lamps,
blinkers, wipers, etc. on the car are working properly.
• Insulate unconnected wires with vinyl tape or other similar
material.
• Some disc changers need conversion cords for connection. See
the section on "Safety Precautions" for details.
• Mount the unit so that the mounting angle is 30° or less.
— 29 —
Connecting Wires to Terminals
2WARNING
Rear right output (Red)
Rear left output (White)
If you connect the ignition wire (red) and the battery
wire (yellow) to the car chassis (ground), you may
cause a short circuit, that in turn may start a fire.
Always connect those wires to the power source
running through the fuse box.
Front right output (Red)
Front left output (White)
2CAUTION
When only two speakers are being connected to the
system, connect the connectors either to both the
front output terminals or to both the rear output
terminals (do not mix front and rear). For example, if
you connect the + connector of the left speaker to a
front output terminal, do not connect the - connector
to a rear output terminal.
Fuse (10A)
To KENWOOD disc changer/
DAB control input/
KPA-SD100/KPA-HD100/KPA-
SS100
FM/AM antenna input
NOTE
If no connections are made, do not let the wire come out from the tab.
To connect these leads, refer to the
relevant instruction manuals.
Wiring harness
(Accessory1)
When using the optional power amplifier, connect
P.CONT
Power control wire (Blue/White)
to its power control terminal.
Depending on what antenna you are using, connect
either to the control terminal of the motor antenna, or
to the power terminal for the booster amplifier of the
film-type antenna.
ANT.
CONT.
Motor antenna control wire (Blue)
White/Black
To front left
speaker
FRONT • L
+
White
To car light control switch
ILLUMI
Dimmer control wire (Orange / White)
Gray/Black
To front right
speaker
FRONT • R
+
Gray
Green/Black
To rear left
speaker
Ignition key
switch
Car fuse box
ACC
REAR • L
+
Green
Ignition wire (Red)
Car fuse
box
(Main fuse)
Purple/Black
Battery wire (Yellow)
To rear right
speaker
REAR • R
+
Purple
Ground wire (Black) - (To car chassis)
–
+
Battery
— 30 —
Installation (non-Japanese cars)
Locking the faceplate to the unit
I
Installation (non-Japanese cars)
I
Locking the faceplate to the unit
If you want to lock the faceplate to the unit so that it does not
fall off, follow the directions below.
Firewall or metal support
1
2
Refer to the function "Removing the faceplate (page 12)" and
remove the faceplate.
Accessory4
Insert the provided screw into the hole at the center of the
bottom side of the faceplate which you have removed from
the unit.
Bend the tabs of the
mounting sleeve with
a screwdriver or similar
utensil and attach it in
place.
Accessory7
Phillips truss
head sheet
metal screw
(commercially
available)
3
Refer to the section "Removing the faceplate (page 12)" and
then reattaching the faceplate.
2CAUTION
Accessory2
Metal mounting
strap
Never insert the taptite screws (ø2 × 4 mm) in any other screw
holes than the one specified. If you insert it in another hole, it
will contract and may cause damage to the mechanical parts
inside the unit.
NOTE
Make sure that the unit is installed securely in place. If the unit
is unstable, it may malfunction (for example, the sound may
skip).
F
2CAUTION
To attach this unit, make sure the front of the control panel faces
you and fit it into the mounting sleeve by pressing the four corners
of the hard rubber frame at the same time.
Do not apply strong pressure to other sections than the corners;
otherwise troubles such as the impossibility of opening or closing
the panel may result.
— 31 —
Removing the Unit
I
I
Removing the Unit
Removing the hard rubber frame
Insert the removal tool into the indentations in the hard rubber
frame, and pull it gently until the lock is released.
1
Refer to the section “Removing the hard rubber frame” and
then remove the hard rubber frame.
2
3
Remove the Hex-head screw with integral washer (M4×8) on
the back panel.
Insert the two removal tools deeply into the slots on each
side, as shown.
Accessory4
Catch facing up
Accessory0
Removal tool
Accessory3
Removal tool
4
Push upward the removal
tool toward the top, and
pull out the unit halfway
while pressing towards the
inside.
2CAUTION
Be careful to avoid injury from the catch pins on the removal
tool.
5
Pull the unit all the way out
with your hands, being
careful not to drop it.
— 32 —
Installation (Japanese-cars)
I
Installing Radio Bracket in Japanese-made Cars (J-Cars)
(For Nissan Car)
After aligning the J-Car bracket with the
factory-installed radio bracket, tighten the
screws.
8mm
Accessory8
J-Car Bracket
Accessory5
for Nissan car
5mm
(follow indications for L/R)
Factory-installed
Radio Bracket
(For Toyota Car)
After aligning the factory-installed radio
bracket, tighten the screws.
8mm
Accessory6
for Toyota car
Factory-installed
Radio Bracket
L
5mm
NOTE
A J-Car Bracket (Accessory 8) is not
used when fitting in a Toyota car.
R
2CAUTION
Damage to the unit will result from
using screws other than those provided.
Factory trim bezel
Accessory9
J-Car Trim Plate
(place thick part on
bottom)
— 33 —
Troubleshooting Guide
What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring.
Before calling service, first check the following table for possible problems.
PROBLEM
POSSIBLE CAUSE
SOLUTION
The power does not turn on.
The fuse has blown.
After checking for short circuits in the wires, replace the
fuse with one with the same rating.
Nothing happens when the
buttons are pressed.
The computer chip in the unit is not functioning normally.
Press the reset button on the unit (see p. 5).
Radio reception is poor.
The car antenna is not extended.
Pull the antenna out all the way.
The antenna control wire is not connected.
Connect the wire correctly, referring to the section on
"Connecting Wires to Terminals".
The memory is erased when
the ignition is turned off.
The battery wire has not been connected to the proper
terminal.
Connect the wire correctly, referring to the section on
"Connecting Wires to Terminals".
The ignition and battery wire are incorrectly connected.
Connect the wire correctly, referring to the section on
"Connecting Wires to Terminals".
The faceplate does not open or
close.
The faceplate is incorrectly attached.
Reattach the faceplate correctly, See the section on
"Removing the Faceplate".(page.12)
Free switching of the sound
quality.
The system Q function is set on Scan mode.
Refer to the “System Q” page and switch it to a
function other than Scan mode. (see p. 10).
Audio control setting cannot be
achieved.
The system Q function is set on Scan mode.
Refer to the “System Q” page and switch it to a
function other than Scan mode.(see p. 10).
— 34 —
Troubleshooting Guide
PROBLEM
POSSIBLE CAUSE
SOLUTION
No sound can be heard, or the
volume is low.
Attenuator is turned on.
Turn off Attenuator.
The fader or balance settings are set all the way to one
side.
Reset the fader or balance settings.
The input/output wires or wiring harness are connected
incorrectly.
Reconnect the input/output wires or the wiring harness
correctly. See the section on "Connecting Wires to
Terminals".
The values of Volume offset are low.
Increase the values of Volume offset. (see p. 10)
Check the speaker wiring.
One of the speaker wires is being pinched by a screw in
the car.
The sound quality is poor or
distorted.
The speakers are not wired correctly.
Reconnect the speaker wires so that each output
terminal is connected to a different speaker.
A CD ejects as soon as it is
loaded.
The CD is upside-down.
The CD is quite dirty.
Load the CD with the labeled side up.
Clean the CD, referring to the section on "Cleaning CDs"
(see p. 6).
The sound skips on a CD.
The CD is scratched or dirty.
Clean the CD, referring to the section on "Cleaning CDs"
(see p. 6).
A track will not play.
Random play has been selected.
Turn off random play.
Can’t remove disc.
The cause is that more than 10 minutes has elapsed
since the vehicle ACC switch was turned OFF.
The disc can only be removed within 10 minutes of the
ACC switch being turned OFF. If more than 10 minutes
has elapsed, turn the ACC switch ON again and press
the Eject button.
— 35 —
Troubleshooting Guide
CD/MD/External disc control mode
PROBLEM
POSSIBLE CAUSE
SOLUTION
The disc control mode cannot
be selected.
No wire has been connected to the disc changer input
terminal on the unit.
Connect the wire to the disc changer input terminal on
the unit.
The specified disc does not
play, but another one plays
instead.
The specified CD is quite dirty.
Clean the CD.
The CD is upside-down.
Load the CD with the labeled side up.
The disc is loaded in a different slot from that specified.
Eject the disc magazine and check the number for the
specified disc.
The disc is severely scratched.
Something is touching the disc changer.
The CD is scratched or dirty.
Try another disc instead.
The sound skips.
Remove whatever is touching it.
If skipping happens at the same place when the car is
stopped, something with the CD is wrong. Clean the CD.
The computer chip in the unit is not functioning normally.
Press the reset button on the unit (see p. 5).
The display shows that the
changer is being played, but no
sound can be heard.
The specified track will not
play.
Random play or magazine random play has been
selected.
Turn off random play or magazine random play.
Track repeat, disc repeat, track
scan, random play, and
magazine random play start by
themselves.
The setting is not canceled.
The settings for these functions remain on until the
setting to off or the disc ejected, even if the power is
turned off or the source changed.
Cannot play CD-R or CD-RW.
Finalization processing is not being conducted for CD-
R/CD-RW.
Conduct finalization processing with CD recorder.
A non-compatible CD changer is being used to play the
CD-R/CD-RW.
Use a CD changer compatible with CD-R/CD-RW to play.
If the following situations, consult your nearest service center:
• Even though the disc changer is connected, the Disc Changer Mode is not on, with "AUX" showing in the display during the Changer Mode.
• Even though no device (KCA-S210A, CA-C1AX, KDC-CPS87, KDC-CX87, KDC-CPS85, KDC-CX-85, KDC-CPS82 or KDC-CX82) is connected, the AUX Mode is
entered when switching modes.
— 36 —
Troubleshooting Guide
The following messages are displayed when certain problems are occurring in your system. Take the
recommended actions.
No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.
Eject
] Load the disc magazine properly.
No CD in the unit.
] Insert the CD.
No disc has been loaded in the disc magazine.
] Load a disc into the disc magazine.
No Disc
No disc has been loaded in the disc magazine.
] Load a disc into the disc magazine.
Toc Error
The CD is quite dirty. The CD is upside-down. The CD is scratched a lot.
] Clean the CD and load it correctly.
Nothing has been recorded on the MD.
Blank Disc
No Tr Disc
NO PANEL
No tracks are recorded on the MD, although it has a title.
The faceplate of the slave unit being connected to this unit has been removed.
] Replace it.
The unit is malfunctioning for some reason.
] Press the reset button on the unit. If the "E- 77" code does not disappear, consult your nearest service center.
E-77
Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.
] Check the disc magazine. And then press the reset button on the unit. If the "Mecha Error" code does not disappear,
consult your nearest service center.
Mecha Error
The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F),
stopping all operation.
] Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F),
the disc will start playing again.
Hold Error
IN
If this indicator blinks, the CD player is malfunctioning.
] Eject the CD and try inseting it again.
If the CD cannot be ejected, press the eject button and hold it in until the CD is ejected.
— 37 —
Specifications
Specifications subject to change without notice.
FM tuner section
Audio section
Frequency range (200 kHz space) ............87.9 MHz – 107.9 MHz
Usable sensitivity (S/N = 30dB) ....................9.3dBf (0.8 µV/75 Ω)
Quieting Sensitivity (S/N = 50dB) ...............15.2dBf (1.6 µV/75 Ω)
Frequency response ( 3 dB).................................30 Hz – 15 kHz
Signal to Noise ratio (MONO)..............................................70 dB
Selectivity ( 400 kHz).......................................................≥ 80 dB
Stereo separation (1 kHz) ....................................................40 dB
Maximum output power.................................................47 W × 4
Full Bandwidth Power (at less than 1% THD) ................22 W × 4
Tone action
Bass : ..........................................................100 Hz 10 dB
Middle : .........................................................1 kHz 10 dB
Treble : ........................................................10 kHz 10 dB
Preout level / Load (during disc play)....................1800 mV/10 kΩ
Preout impedance............................................................≤ 600 Ω
AM tuner section
Frequency range (10 kHz space) ...................530 kHz – 1700 kHz
Usable sensitivity (S/N = 20dB) .............................28 dBµ (25 µV)
General
Operating voltage (11 – 16V allowable) ..............................14.4 V
Current consumption.............................................................10 A
Installation Size (W x H x D) ..........................182 × 53 × 162 mm
7-3/16 × 2-1/16 × 6-3/8 in.
CD player section
Laser diode ....................................................GaAlAs (λ=780 nm)
Digital filter (D/A) .....................................8 Times Over Sampling
D/A Converter .......................................................................1 Bit
Spindle speed ..............................................500 – 200 rpm (CLV)
Wow & Flutter........................................Below Measurable Limit
Frequency response ( 1 dB).................................10 Hz – 20 kHz
Total harmonic distortion (1 kHz) ......................................0.01 %
Signal to Noise ratio (1 kHz) ..............................................105 dB
Dynamic range ....................................................................93 dB
Channel separation..............................................................85 dB
Weight ..................................................................4.2 lbs (1.9 kg)
— 38 —
|