Kambrook KCR30 User Manual

Clock Radio  
KCR30  
Issue 1/02  
POWER SUPPLY  
SETTINGTHETIME  
AC power: 230-240Volt, 50Hz  
1. Press and hold TIME (4) and press (6)  
or (7) to adjust to your desired time.  
DC power: 9Volt battery type (not  
provided) for clock back-up system only.  
2. Release Time (4) to store your settings  
in memory.  
LISTENINGTOTHE RADIO  
1. Switch to AM or FM position with the  
Band selector (8).  
An alkaline type battery is recommended.  
For optimum performance, this battery  
should be replaced every 6 months  
1. Insert the AC power cord (12) into a  
convenient AC power outlet. Ensure  
the switch on the power outlet is in the  
off position, plug in the power cord, and  
then switch on at the AC power outlet.  
2. For a better reception in FM, extend  
the antenna (11). For better reception  
in AM rotate the unit.  
3. Switch the function selector to the ON  
position (1).  
2. Connect the 9V battery inside the  
compartment at the bottom of the unit  
(9).  
4.Adjust the volume (10) to the desired  
level.  
Back-up system: Ensures that the unit  
will continue to operate as normal during  
an AC power disruption (in order to  
preserve the battery life the display will  
not light).All clock settings will be kept in  
the memory, however, the clock time may  
require adjustment for exact accuracy. If  
this battery is not installed, the display will  
blink 00:00 to indicate that you have to  
reset the time and alarm settings.  
5. Select your desired radio station (15)  
and (16).  
6.To stop listening switch to OFF (1).  
SETTINGTHE ALARM WAKE-UP  
MODE  
• Press and hold the ALARM (2), and press  
(6) or (7) to adjust your desired alarm  
time, then release the ALARM (2) to  
store your setting in memory  
To wake up to the radio follow steps 1  
to 3 in “Listening to the Radio”, then  
select the AUTO position (1). The alarm  
indicator will alight (14).  
To wake up to the alarm sound, select  
the BUZZER position (1).The alarm  
indicator will alight (14).  
STOPPINGTHE ALARM  
The alarm is programmed to operate for  
59 minutes  
CARE AND MAINTENANCE  
Use only a clean, dry cloth to clean the  
external surfaces of the radio only.  
1. SNOOZE (5): Press to stop the alarm  
temporarily, the alarm will ring again  
after 9 minutes.  
Do not attempt to open the case of the  
radio at anytime, there are no customer  
serviceable parts inside.  
2.ALARM (2):The alarm will stop and will  
sound again 24 hours later.  
Have the radio serviced by a qualified  
service agent should the unit require  
access to internal components.  
3. OFF (1):Turns off the alarm  
permanently, alarm indicator will go off.  
SLEEPTO MUSIC  
When not in use, pack the radio in its  
original box for best protection and store  
Select AM or FM (8) then press SLEEP (3), in a cool, clean and dry location.  
the sound will come on for 59 minutes.  
To change this sleep time press and hold  
SLEEP (3) and use (6) to increase the time  
by 1 hour or (7) to decrease the time by  
1 minute intervals. To turn off the music  
earlier, press SNOOZE (5).The maximum  
time setting is 1 hour 59 minutes.  
IMPORTANT  
Do not throw batteries in fire!  
This radio is designed for indoor use only.  
Do not immerse in water or allow liquids  
to come in contact with the radio.  
KAMBROOK  
12 MONTH WARRANTY  
If the product includes one or a number  
of accessories only the defective accessory  
or product will be replaced.  
KAMBROOK warrants the purchaser  
against defects in workmanship and  
material, for a period of 12 months from  
the date of purchase (3 months  
commercial use).  
In Australia, this KAMBROOK Guarantee  
is additional to the conditions and  
guarantees which are mandatory as  
implied by the Trade Practices Act 1974  
and State Territory legislation.  
Guarantee and purchase receipt for this  
product are to be retained as proof of  
purchase and must be presented if making  
a claim under the terms of the  
For service, spare parts or product  
information in Australia, please call  
KAMBROOK on the customer Service  
Line (free call) 1800 800 634.  
KAMBROOK guarantee.  
KAMBROOK reserves the right to  
replace or repair the appliance within  
the warranty period.  
For service, spare parts or product  
information in New Zealand, please  
call KAMBROOK New Zealand, Mono  
Place, Ellerslie,Auckland.  
Warranty does not apply to any defect,  
deterioration, loss or injury or damage  
occasioned by, or as a result of the misuse  
or abuse, negligent handling or if the product  
has not been used in accordance with the  
instructions.The guarantee excludes  
breakages and consumable.  
Phone 0800 253 007, FAX 0800 263 001.  
If claiming under this guarantee the product  
must be returned to freight prepaid.  
This warranty is void if there is evidence  
of the product being tampered with by  
unauthorised persons.  
YOUR PURCHASE RECORD (Please complete)  
Attach a copy of purchase  
receipt here.  
DATE OF PURCHASE___________________________
MODEL NUMBER _____________________________
SERIAL NUMBER (If applicable) ___________________
Please don’t return purchase record  
unless you are making a claim  
PURCHASED FROM ___________________________
Kambrook 4 Kingston Town Close Oakleigh,Victoria 3166,Australia  
Customer Service Line (free call) 1800 800 634 Customer Service Fax 1800 621 337  
Kambrook (New Zealand) Mono Place Ellerslie,Auckland, New Zealand  
Customer Service Line/Spare Parts 0800 253 007 Customer Service Fax 0800 263 001  
Due to continual improvement in design or otherwise, the product you purchase may differ slightly from the one illustrated in this book. Issue 1/02  

Nokia 2652 User Manual
Motorola MB502 GSG User Manual
Maxtor DIAMONDMAX 22 STM3320614AS User Manual
Lindy KVM EXTENDER 39356 User Manual
LaCie Starck Desktop User Manual
Kyocera Candid KX16 User Manual
Dual XDM7615 User Manual
Bogen CDC 3 User Manual
Audiovox PR 130 User Manual
Addonics Technologies AE25SN35SA User Manual