Jura Capresso IMPRESSA F505 User Manual

IMPRESSA F50/F5/F505  
Instructions for use  
8/06  
Fig. 1  
Fig. 2  
Fig. 7  
Fig. 12  
Fig.17  
Fig. 3  
Fig. 8  
Fig. 13  
Fig. 4  
Fig. 9  
Fig. 14  
Fig. 5  
Fig. 6  
Fig. 10  
Fig. 11  
Fig. 15  
Fig. 16  
Control elements  
11 22  
1. Rotary Switch  
2. Illuminated ring  
13  
3. ON/OFF key  
4. Programming key  
5. Draw-off key 1 cup  
Rotary Switch  
6. Draw-off key 2 cups  
12  
13  
7. Maintenance key  
8. Steam pre-selection key  
9. Display dialog system  
10. Water tank with carrying handle  
11. Filler funnel for pre-ground coffee:  
12. Bean tank cover  
10  
8
7
6
5
3 4  
9
2
14  
1
13. Aroma preservation cover  
14. Steam/hot water draw-off valve  
15. Easy-Auto-Cappuccino Frother with milk pipe  
16. Interchangeable hot water nozzle (see Fig. 5)  
17. Height-adjustable coffee spout  
18. Coffee grounds container  
19. Drip grate  
15/16  
17  
18  
21  
20. Drip tray  
21. Power Switch  
22. Metal shelf  
19  
20  
Contents  
1. Safety information..........................................page  
6
6
6
6
6
6
7
7
7
7
7
8
9
9
9
15.1 Programming the filter ...........................page 15  
15.2 Programming the water hardness ..............page 15  
15.3 Programming the aroma ROBUST  
1.1  
1.2  
Warning..............................................page  
Precautions..........................................page  
2. Preparing the IMPRESSA................................page  
or STANDARD .....................................page 15  
E
2.1  
2.2  
2.3  
2.4  
2.5  
2.6  
Check supply voltage..............................page  
Check electrical fuse ..............................page  
Fill water tank......................................page  
Fill coffee beans....................................page  
Adjusting the grinding gear .....................page  
Power switch........................................page  
15.4 Programming the temperature..................page 16  
15.5 Programming the time............................page 16  
15.6 Programming the automatic  
switch-on time ......................................page 17  
15.7 Programming the automatic  
switch-off time......................................page 17  
3. First use.......................................................page  
4. Adjusting the water hardness ............................page  
5. Installation of CLARIS plus filter cartridges ........page  
15.8 Cup counter .........................................page 18  
15.9 Programming the language......................page 18  
15.10 Programming Display 24H/AM/PM ...........page 18  
15.11 Programming the display for ML/OZ..........page 19  
16. Maintenance .................................................page 19  
16.1 Filling in water.....................................page 19  
16.2 Emptying the coffee grounds container .......page 19  
16.3 Drip tray missing...................................page 20  
16.4 Fill coffee beans....................................page 20  
16.5 Replacing the filter................................page 20  
16.6 Cleaning the IMPRESSA ........................page 20  
16.7 IMPRESSA decalcify.............................page 20  
16.8 General cleaning instructions ...................page 20  
16.9 Emptying the system ..............................page 21  
17. Cleaning.......................................................page 21  
18. De-scaling.....................................................page 22  
19. Disposal .......................................................page 23  
20. Tips for perfect coffee .....................................page 23  
21. Messages......................................................page 24  
22. Problems......................................................page 25  
23. Legal information...........................................page 26  
24. Technical Data...............................................page 26  
5.1  
5.2  
Installing the filter ................................page  
Replacing the filter................................page  
6. Rinsing the IMPRESSA...................................page 10  
7. Adjusting the water quantity for coffee................page 10  
8. Drawing off 1 cup of coffee ..............................page 10  
9. Drawing off 2 cups of coffee .............................page 11  
10. Drawing off pre-ground coffee ...........................page 11  
11. Drawing off hot water .....................................page 12  
12. Drawing off steam ..........................................page 12  
13. Dispensing Cappuccino with the  
Easy-Auto-Cappuccino Frother ..........................page 13  
13.1 Cleaning the Easy-Auto-Cappuccino  
Frother ...............................................page 14  
13.2 Rinsing the Easy-Auto-Cappuccino  
Frother ...............................................page 14  
13.3 Cleaning the Easy-Auto-Cappuccino  
Frother ...............................................page 14  
14. Switching off the IMPRESSA ...........................page 15  
15. Programming ................................................page 15  
5
Introduction  
1.2 Precautions  
Never expose the coffee machine to weather (rain, snow, frost),  
never touch the machine when your hands are wet.  
Thank you for purchasing the IMPRESSA. To ensure perfect func-  
tioning of your IMPRESSA, carefully read this operating manual  
and keep it for future reference.  
Should you need more information or if you encounter particular  
problems not specified in these operating instructions in sufficient  
detail, either contact us directly or contact your local authorized  
dealer.  
Place the IMPRESSA on a firm, level base that is resistant to  
any water that may leak. Never stand on hot or warm surfaces  
(oven hobs). Keep out of the reach of children.  
If you don’t use the machine for a longer time (holidays, etc.)  
always disconnect the mains cable.  
Always disconnect mains cable before cleaning the machine.  
You will also find useful tips on operation and maintenance  
Don’t forget to check out the Knowledge Builder our ani-  
mated operating instructions. LEO, our assistant, will take  
you through all the functions.  
When disconnecting the mains cable never pull on the mains  
cable or the machine itself.  
The coffee machine is connected to mains supply via a mains  
cable. Make sure nobody can trip over the mains cable. Make  
sure children and pets cannot reach the machine  
Never put the coffee machine or individual parts of it into a  
dishwasher.  
Make sure to install the machine at a place with sufficient air  
circulation, to prevent overheating of the machine.  
1. Safety information  
1.1 Warning  
2. Preparing the IMPRESSA  
2.1 Check supply voltage  
Children do not realize the dangers involved in using electric  
appliances, for this reason always keep an eye on children when  
they use electric appliances.  
The IMPRESSA is preset in the factory to the correct mains  
voltage. Check if your local mains supply voltage complies with  
the information given on the type plate on the underside of the  
IMPRESSA.  
The coffee machine may only be used by instructed persons.  
Never use a defective coffee machine or a machine with a  
defective mains cable.  
Never repair or open the coffee machine yourself. Any repairs  
may only be carried out by authorized service shops using ori-  
ginal spare parts and accessories.  
2.2 Check electrical fuse  
The IMPRESSA is designed for an electric current of 10 amperes.  
Check if the electrical fuse has sufficient capacity.  
Never immerse the coffee machine in water.  
6
Open the bean tank cover (12) and remove the aroma preser-  
vation cover (13).  
2.3 Fill water tank  
Only use fresh, cold water. Never fill in milk, mineral water  
or other liquids.  
To adjust the grinding degree, turn the Rotary Switch (Fig. 2) to  
the required position.  
Remove the water tank and rinse it with cold tap water  
thoroughly (Fig. 4).  
2.6 Power switch  
E
Then fill the water tank and reinstall it. Make sure to install the  
tank properly, it must engage audibly.  
Actuate the power switch (21) on your IMPRESSA before  
using the machine for the first time.  
We recommend that you switch off your IMPRESSA with  
the power switch (21) if you intend not to use the machine  
for longer periods of time (e.g.during holidays)  
2.4 Fill coffee beans  
To ensure that your machine will work perfectly for a long  
time and to avoid damage, please note that the grinding gear  
of your JURA coffee machine is not suitable for coffee beans  
which were treated, during or after roasting, with additives  
(e.g. sugar). Such coffee blends may damage the grinding  
gear. Any repair costs resulting from the use of such blends  
are not covered by warranty.  
3. First use  
Fill coffee beans in the bean tank (12).  
Switch on the IMPRESSA using the ON/OFF key  
(3).  
SPRACHE  
DEUTSCH  
Open the bean tank cover (12) and remove the aroma preser-  
vation cover (13).  
The illuminated ring (2) is active.  
Remove any dirt or foreign matter from the bean tank.  
Turn the Rotary Switch (1) until the required language is dis-  
played.  
Fill coffee beans in the bean tank and close the cover.  
For example  
LANGUAGE  
ENGLISH  
2.5 Adjusting the grinding gear  
Confirm your selection by pressing the Rotary Switch (1).  
You can adjust the grinding gear to the roast of your coffee. We  
recommend  
FILL  
WATER  
a fine grinding degree Ǟ for bright roasts (the smaller the dots,  
Fill the water tank (10) with fresh water.  
OPEN TAP  
the finer the grinding)  
a coarse degree  
Ǟ
for dark roasts (the larger the dots, the  
coarser the grinding)  
Place a receptacle under Easy-Auto-Cappuccino Frother (15)  
(Fig. 10).  
The grinding degree may only be adjusted while the grinding  
gear is running.  
Open the steam / hot water draw-off tap (14) (Fig. 13).  
7
The displayed information means the following:  
LEVEL –– Water hardness function switched off  
FILLING  
SYSTEM  
CLOSE TAP  
LEVEL 1 German water hardness degree 1 to 7°  
French Water hardness degree 1.79 – 12.53°  
Close the steam / hot water draw-off tap (14).  
LEVEL 2 German water hardness degree 8 to 15°  
French Water hardness degree 14.32 – 26.85°  
HEATING  
PRESS  
RINSE  
LEVEL 3 German water hardness degree 16 to 23°  
French Water hardness degree 28.64 – 41.14°  
Press the maintenance key  
(7).  
LEVEL 4 German water hardness degree 24 to 30°  
French Water hardness degree 42.96 – 53.7°  
Machine carries out a rinsing operation.  
RINSING  
READY  
When the IMPRESSA leaves the factory it is adjusted to LEVEL 3.  
You can adjust another hardness. To do this, proceed as follows:  
If BEANS FILL is displayed, press the coffee draw-off key  
again. Machine not filled with coffee beans yet.  
READY  
Press the programming key  
FILTER  
(4), illuminated ring (2) is active.  
To get an excellent crema, adjust the coffee spout (17) to the  
size of your cup (Fig. 3).  
Turn the Rotary Switch (1) until the following message is dis-  
played:  
4. Adjusting the water hardness  
HARDNESS  
Now press the Rotary Switch (1) to start the programming.  
LEVEL 3  
Turn the Rotary Switch (1) until the required level is displayed.  
For example, LEVEL 4  
Press the Rotary Switch (1) to confirm the required level.  
HARDNESS  
Water is heated in the IMPRESSA. As a result, calcification  
occurs during normal use and is indicated automatically.  
Before using the IMPRESSA for the first time the hardness  
of the water used must be adjusted. Use the supplied test  
sticks for this.  
1° German hardness is equivalent to 1.79° French hardness.  
Press the programming key  
mode.  
(4) to quit the programming  
If the filter is activated, the program step Water Hardness no  
longer appears.  
READY  
The IMPRESSA has 5 hardness degrees which can be used  
and are displayed while you are adjusting the water hardness.  
8
Close the steam/hot water draw-off tap (14), now the IM-  
PRESSA will heat up to coffee temperature.  
5. Installation of CLARIS plus filter cartridges  
If the CLARIS plus filter cartridge is installed properly, de-  
scaling of the coffee machine is no longer required. For  
more information on the CLARIS plus filter cartridge refer  
to brochure «CLARIS plus. Hard on limescale. Gentle on  
your coffee machine.»  
HEATING  
READY  
Now you have activated the filter. In Programming Mode the  
water hardness selection function is no longer displayed.  
E
5.1 Installing the filter  
5.2 Replacing the filter  
Fold up the cartridge holder. Install the filter cartridge in the  
After drawing off approx. 50 litres, the filter cartridge will be  
used up. A message requesting you to replace the filter will  
appear on the display. Please monitor the period of use of the  
CLARIS plus filter cartridge (max. 2 months) using the scale  
on the cartridge holder by the water tank.  
water tank, applying a gentle pressure (Fig. 1).  
Fold down the cartridge holder again until it engages audibly.  
Fill the water tank with cold, fresh tap water and install it again.  
Press the programming key  
(4), the illuminated ring (2) is  
active.  
READY/FILTER  
FILTER  
Press the Rotary Switch (1) to start the programming.  
NO –  
Switch off the IMPRESSA using the ON/OFF key  
(3).  
(7) until the following message is  
Press the maintenance key  
displayed:  
Turn the Rotary Switch (1) until the following message is dis-  
CHG FILTER  
OPEN TAP  
played:  
YES 
ߛ
 
Remove the water tank from the machine and empty it.  
Press the Rotary Switch (1) to activate the filter cartridge.  
Fold up the cartridge holder. Install the filter cartridge in the  
INSERT  
OPEN TAP  
water tank, applying a gentle pressure (Fig. 1).  
Fold down the cartridge holder again until it engages audibly.  
Put a sufficiently large container (at least 0.5 litre) under the  
Fill the water tank with cold, fresh tap water and reinstall it.  
Easy-Auto-Cappuccino Frother (15) (Fig. 10).  
Place a sufficiently large jug (approx 1 litre) under the Easy-  
Auto-Cappuccino Frother (15) (Fig. 10) and open the steam/hot  
water tap (14).  
If not installed already, insert the CLARIS plus filter.  
Open the steam / hot water draw-off tap (14) (Fig.13).  
RINSING  
FILTER  
RINSING  
FILTER  
CLOSE TAP  
CLOSE TAP  
9
Open the steam / hot water draw-off tap (14).  
Turn the Rotary Switch (1) until the required water quantity is  
displayed.  
HEATING  
READY  
For example,  
120 ML  
8. Drawing off 1 cup of coffee  
6. Rinsing the IMPRESSA  
You have the possibility of increasing the strength of the  
coffee at any time in the grinding process by pressing the  
When the IMPRESSA is switched off and has cooled down,  
a rinsing operation is started when the machine is switched  
on again. When the machine is switched off, a rinsing oper-  
ation is started automatically.  
1-cup draw-off key  
again  
For Example: by pressing the 1-cup draw-off key  
times you get strong coffee.  
STRONG  
three  
Switch on the IMPRESSA using the ON/OFF key  
(3).  
HEATING  
You can choose among three strengths at the push of a but-  
ton. The longer you press the draw-off key for 1 cup (5),  
the stronger your coffee will be (Display: MILD/ NORMAL/  
STRONG).  
PRESS  
RINSE  
Press the maintenance key  
(7).  
RINSING  
READY  
You can adjust the water quantity before the draw-off opera-  
tion using the Rotary Switch (1).  
You can stop the draw-off operation at any time by pressing  
any coffee draw-off key.  
7. Adjusting the water quantity for coffee  
The indicated value in ML is a reference value and may  
deviate from the actual value  
You can check the water quantity used for the last draw-off  
operation by pressing the Rotary Switch (1).  
If you press the draw-off key for 2 cups  
quantity is doubled automatically.  
(6) the water  
READY  
Put a cup under the adjustable coffee spout (17).  
You can change/stop the water quantity during the draw-off  
operation, too. Turn the Rotary Switch (1) until the required  
ML value is displayed.  
Press the draw-off key for 1 cup  
strength is displayed:  
(5) until the required  
MILD  
180 ML (water quantity last adjusted)  
You can adjust the water quantity in steps of 5 ML using the  
Rotary Switch (1).  
The illuminated ring (2) is active.  
Turn the Rotary Switch (1) again to select the water quantity  
individually:  
READY  
10  
10. Drawing off pre-ground coffee  
For Example:  
160 ML  
MILD  
For Example:  
Never use instant coffee or quick-coffee. We recommend  
that you always use powder from fresh coffee beans or, pre-  
ground, vacuum-packed coffee. Never fill in more than 2  
portions of powder. The pre-ground coffee tank is no storage  
tank. Make sure that the pre-ground you use is not too fine.  
This may cause blocking of the system. In this case the  
coffee only drips out of the coffee spout.  
Your product is being prepared.  
READY  
9. Drawing off 2 cups of coffee  
E
Selecting the coffee strength is not possible when drawing  
off 2 cups of coffee. You will draw off 2 mild cups auto-  
matically.  
If you have filled in too little powder, the message ADD  
MORE POWDER will be displayed. The IMPRESSA stops  
the operation and returns to "ready for draw off" mode.  
You can adjust the water quantity before the draw-off ope-  
ration using the Rotary Switch (1). The adjusted value (ML)  
refers to 1 cup.  
You can stop the draw-off operation at any time by pressing  
any coffee draw-off key.  
You can stop the draw-off operation at any time by pressing  
any coffee draw-off key.  
READY  
You can check the water quantity used for the last draw-off  
operation by pressing the Rotary Switch (1).  
Put 1 or 2 cups under the adjustable coffee spout (17).  
Open the cover of the filler funnel for pre-ground coffee (11).  
FILL  
POWDER  
READY  
Put 2 cups under the adjustable coffee spout (17).  
Press the draw-off key for 2 cups (6).  
Fill 1 or 2 level spoonfuls of pre-ground coffee in the filler  
funnel for pre-ground coffee (11) (Fig. 11) and close the cover.  
2 CUPS  
120 ML (water quantity last adjusted)  
POWDER  
SELECT  
CUP BUTTON  
The illuminated ring (2) is active.  
Turn the Rotary Switch (1) again to select the water quantity  
individually:  
Press the required draw-off key for 1 cup  
(6)  
(5) or 2 cups  
For Example:  
2 CUPS  
Your product is being prepared.  
READY  
210 ML  
120 ML (water quantity last adjusted)  
The illuminated ring (2) is active.  
POWDER  
Turn the Rotary Switch (1) again to select the water quantity  
individually:  
11  
Close the steam / hot water draw-off tap (14).  
For Example:  
POWDER  
Your product is being prepared.  
READY  
210 ML  
READY  
Before CLOSE TAP water may still escape the system.  
11. Drawing off hot water  
12. Drawing off steam  
If you do not change the settings using the Rotary Switch  
(1), the water quantity last adjusted will be drawn off auto-  
matically.  
The steam function is used for the preparation of milk foam  
as well as for the Easy-Auto-Cappuccino Frother (15) clean-  
ing programme.  
Install the hot water nozzle (see Fig. 5 ) to obtain perfect  
water flow. Do not replace the replaceable hot water nozzle  
(16) directly after drawing off water, because the nozzle is  
hot after the draw-off operation.  
With the optionally available 2-stage frothing nozzle, liquids  
can be heated and frothed using the steam function.  
Make sure that the nozzle is correctly fitted when drawing  
steam. If the nozzle becomes blocked with particles of milk  
residue or is incorrectly assembled, a danger can arise during  
use whereby the nozzle may jump off.  
At the start of the water draw-off operation there can be  
splashing Avoid direct contact with the skin!  
READY  
Due to the system design, some water will escape at first  
when steam is drawn. However, this will not affect the result  
in any way.  
Place a cup under the replaceable hot water nozzle (16).  
Open the steam / hot water draw-off tap (14) (Fig. 13).  
The illuminated ring (2) is active.  
When drawing steam, spluttering can occur at the start. The  
nozzle becomes hot in use. Avoid any direct skin contact.  
For example,  
WATER  
140 ML  
READY  
Adjust the required water quantity by turning the Rotary Switch  
Press the steam pre-selection key  
(8).  
(1).  
HEATING  
For example,  
WATER  
200 ML  
STEAM  
READY  
If the required water quantity is reached, the following message  
is displayed:  
To draw off steam, open the steam/hot water draw-off tap (14)  
(Fig. 13).  
CLOSE TAP  
The illuminated ring (2) is active.  
12  
You can adjust the steam draw-off time individually by turning  
the Rotary Switch (1) until the required SEC are displayed.  
When using for the first time, remove the protective cover from  
the Easy-Auto-Cappuccino Frother (15) (Fig. 6). The protective  
cover is used only during transport as protection to prevent the  
ingress of contaminated materials.  
For example,  
35 SEC  
If you do not change the steam draw-off time settings using the  
Rotary Switch (1), the machine will use the settings last adjusted  
Remove the milk pipe from the Welcome Pack and connect it to  
the Easy-Auto-Cappuccino Frother (15).  
E
During the steam draw-off operation, the message STEAM is  
displayed  
Insert the other end of the milk pipe into a Tetra Pak of milk or  
connect it to a milk container (Fig. 7).  
When the steam quantity is reached, the message CLOSE TAP is  
displayed  
Place a cup under the Easy-Auto-Cappuccino Frother (15)  
(Fig. 7).  
Close the steam / hot water draw-off tap (14).  
STEAM  
READY  
A useful addition is available for all lovers of milk speciali-  
ties in the form of high-quality vacuum milk containers.  
They keep the milk cool the whole day long and are opti-  
mally suited to the design of your IMPRESSA.  
All original JURA accessories can be obtained from the  
specialist shop.  
As long as STEAM READY is on view in the display, the  
machine is ready to dispense steam.  
Before CLOSE TAP, steam may still escape the system.  
Press the steam pre-selection key  
(8).  
HEATING  
13. Dispensing Cappuccino with the  
Easy-Auto-Cappuccino Frother  
STEAM  
READY  
To draw off steam open the steam/hot water draw-off tap (14)  
(Fig. 13). The milkfoam is prepared.  
Cappuccino comprises of one third each of Espresso, hot  
milk and milk foam. You produce the milk portion with the  
Easy-Auto-Cappuccino Frother (15).  
When steam is drawn, a vacuum is produced which, with the  
aid of the Easy-Auto-Cappuccino Frother (15), draws in the  
milk and produces milk foam.  
The illuminated ring (2) is active.  
You can adjust the steam draw-off time individually by turning  
the Rotary Switch (1) until the required SEC are displayed.  
For example,  
35 SEC  
To ensure perfect function, the Easy-Auto-Cappuccino  
Frother (15) must be cleaned regularly.  
If you do not change the steam draw-off time settings using the  
Rotary Switch (1), the machine will use the settings last adjusted  
Make sure that the nozzle is correctly fitted. If the nozzle be-  
comes blocked with particles of milk residue or is incorrectly  
assembled, a danger can arise during use whereby the nozzle  
may jump off.  
Adjust the steam dispensing time to suit the size of your  
cup.  
13  
During the steam draw-off operation, the message STEAM is  
Reassemble the Easy-Auto-Cappuccino Frother (15) and refit it  
displayed.  
on to your IMPRESSA.  
When the steam quantity is reached, the message CLOSE TAP is  
displayed.  
13.3 Cleaning the Easy-Auto-Cappuccino Frother  
Close the steam / hot water draw-off tap (14).  
To ensure that the Easy-Auto-Cappuccino Frother(15) func-  
tions perfectly, you should clean it daily if you have prepared  
milk foam.  
STEAM  
READY  
At any time, you can stop dispensing steam at an earlier  
stage by closing the tap for dispensing steam/hot water (14).  
You will not be prompted by your IMPRESSA to clean the  
Easy-Auto-Cappuccino Frother (15).  
As long as STEAM READY is on view in the display, the  
machine is ready to dispense steam.  
You can obtain the JURA Auto-Cappuccino Cleaner from  
the specialist shop.  
Due to the system design, steam can still escape and some  
milk may continue to drip before the TAP is closed.  
Place a container under the Easy-Auto-Cappuccino Frother (15).  
(Fig. 9)  
Fill a second container with 2.5 dl of fresh water and add one  
capful of the Auto-Cappuccino Cleaner.  
Now, move your cup with the milk foam and place it under the  
coffee spout and dispense the required coffee product. (Fig. 8)  
Your Cappuccino is ready.  
Dip the milk pipe into the second container with the Auto-Cap-  
puccino Cleaner. (Fig. 9)  
Press the steam pre-selection key  
(8).  
13.1 Cleaning the Easy-Auto-Cappuccino Frother  
HEATING  
To ensure that the Easy-Auto-Cappuccino Frother functions  
perfectly, you should rinse it with water each time after  
preparing milk.  
STEAM  
READY  
To draw off steam open the steam / hot water draw-off tap (14)  
(Fig 13).  
You will not be prompted by your IMPRESSA to rinse the  
Easy-Auto-Cappuccino Frother.  
Draw steam until the container with the Auto-Cappuccino Clea-  
ner is empty.  
This procedure cleans the Easy-Auto-Cappuccino Frother and the  
milk pipe.  
13.2 Rinsing the Easy-Auto-Cappuccino Frother  
Carefully pull off the Easy-Auto-Cappuccino Frother.  
Close the steam / hot water draw-off tap (14).  
Dismantle the Easy-Auto-Cappuccino Frother (15) into its indi-  
vidual parts (Fig. 16)  
STEAM  
READY  
Thoroughly rinse all parts of the nozzle under running water.  
14  
As long as STEAM READY os on view in the display, the  
machine is ready to dispense steam.  
You can programme the following stages:  
¼ Filter  
¼ Water hardness  
¼ Aroma  
Fill the container with 2.5 dl of fresh water.  
Dip the milk pipe into the container with the fresh water.  
¼ Temperature  
¼ Time  
E
When READY appears in the display, press the steam prese-  
¼ Automatic switch-on time  
¼ Automatic switch-off time  
¼ Draw-offs  
lect key  
(8) again to set the machine in readiness for the  
steam function.  
¼ Language  
¼ Display  
Open the tap for dispensing steam/hot water (14) (Fig. 13) in or-  
der to draw steam.  
Programming key  
Use the programming key  
programming mode (no saving of values effected).  
(4)  
Draw steam until the container with the fresh water is empty.  
This procedure rinses the Easy-Auto-Cappuccino Frother (15)  
and the milk pipe with fresh water.  
(4) to open or quit the  
Cleaning of the Easy-Auto-Cappuccino Frother (15) is now com-  
plete, your IMPRESSA is ready for use.  
Rotary switch  
Turn the Rotary Switch to change the adjusted values or to  
select the next programming step.  
Press the Rotary Switch to check the values adjusted or to  
save the values selected  
14. Switching off the IMPRESSA  
To ensure perfect operation, please switch your IMPRESSA  
to standby mode with the  
the machine off with the power switch (21).  
(3) symbol first. Then switch  
15.1 Programming the filter  
Refer to Chapter 5.1 «Inserting the filter».  
READY  
Switch off the IMPRESSA using the ON/OFF key  
RINSING  
(3).  
15.2 Programming the water hardness  
Refer to Chapter 4 «Adjusting the water hardness».  
An automatic rinsing operation is started.  
15.3 Programming the aroma ROBUST  
or STANDARD  
15. Programming  
When your IMPRESSA leaves the factory it is adjusted such  
that you can draw off coffee without having to change any  
settings. However, you can programme various parameters  
individually.  
When the machine leaves the factory, the aroma is set to  
robust. If requested it can also be set to Standard.  
15  
READY  
Press programming key  
FILTER appears.  
NORMAL  
To confirm the new settings, press the Rotary Switch (1).  
TEMPERATURE  
Press the programming key  
(4) until  
The illuminated ring (2) is active.  
(4) to quit the programming  
Turn the Rotary Switch (1) until Aroma is displayed.  
mode or select the next programming item using the Rotary  
Switch (1).  
AROMA  
Press the Rotary Switch (1).  
ROBUST  
READY  
15.5 Programming the time  
Turn the Rotary Switch (1) until the following message is dis-  
played:  
You must programme the time if you want to use the auto-  
matic switch-on function.  
STANDARD  
To confirm the new aroma settings, press the Rotary Switch (1).  
AROMA  
Press the programming key  
mode or select the next programming item using the Rotary  
Switch (1).  
READY  
Press programming key  
FILTER appears.  
(4) until  
(4) to quit the programming  
The illuminated ring (2) is active.  
Turn the Rotary Switch (1) until TIME is displayed.  
READY  
TIME  
Now press the Rotary Switch (1) to start programming the time.  
--:--  
Turn the Rotary Switch (1) to adjust the hours..  
12:--  
15.4 Programming the temperature  
READY  
Press programming key  
FILTER appears.  
(4) until  
Press the Rotary Switch (1) to confirm the hour settings and to  
activate the minutes.  
The illuminated ring (2) is active.  
Turn the Rotary Switch (1) until Temperature is displayed.  
12:--  
Turn the Rotary Switch (1) to select the minutes.  
2:05  
To confirm the new settings, press the Rotary Switch (1).  
TIME  
TEMPERATURE  
Press the Rotary Switch (1).  
HIGH  
Turn the Rotary Switch (1) to change the temperature from  
HIGH to NORMAL (or vice versa).  
16  
Press the programming key  
(4) to quit the programming  
Press the programming key  
(4) to quit the programming  
mode or select the next programming item using the Rotary  
Switch (1).  
mode or select the next programming item using the Rotary  
Switch (1).  
READY  
READY  
If the machine is disconnected from power supply, the time  
must be programmed again.  
E
15.7 Programming the automatic switch-off time  
You can programme your coffee machine such that it will  
switch off automatically after a certain time. You can pro-  
gramme the switch-off time in a range between 0.5 and 9  
hours, or select ––:–– (i.e. inactive).  
15.6 Programming the automatic switch-on time  
You must programme the time (Chapter 15.5) if you want to  
use the automatic switch-on function.  
READY  
Press programming key  
FILTER appears.  
READY  
Press programming key  
FILTER appears.  
(4) until  
(4) until  
The illuminated ring (2) is active.  
The illuminated ring (2) is active.  
Turn the Rotary Switch (1) until OFF AFT. HR is displayed.  
Turn the Rotary Switch (1) until MACHINE ON is displayed.  
OFF AFT. HR  
MACHINE ON  
Now press the Rotary Switch (1) to start programming the  
Now press the Rotary Switch (1) to start programming the  
switch-off time. Switch-off time OFF AFT. HR  
switch-on time.  
5.0 HR  
Turn the Rotary Switch (1) to adjust the hours.  
1.0 HR  
To confirm the new switch-off time, press the Rotary Switch (1).  
OFF AFT. HR  
Press the programming key  
--:--  
Turn the Rotary Switch (1) to adjust the hours.  
12:--  
Press the Rotary Switch (1) to confirm the hour settings and to  
activate the minutes.  
(4) to quit the programming  
12:--  
Turn the Rotary Switch (1) to select the minutes.  
12:05  
To confirm the new switch-on time, press the Rotary Switch (1).  
MACHINE ON  
mode or select the next programming item using the Rotary  
Switch (1).  
READY  
17  
15.8 Cup counter  
15.9 Programming the language  
You can check how many cups of the following coffee products  
were drawn off:  
a) 1 cup  
b) 2 cups  
c) Powder coffee  
READY  
Press programming key  
FILTER appears.  
(4) until  
The illuminated ring (2) is active.  
Turn the Rotary Switch (1) until LANGUAGE is displayed.  
READY  
Press programming key  
FILTER appears.  
LANGUAGE  
(4) until  
Now press the Rotary Switch (1) to start programming the item  
LANGUAGE.  
The illuminated ring (2) is active.  
Turn the Rotary Switch (1) until the required language is dis-  
played.  
Turn the Rotary Switch (1) until CUPS MADE is displayed.  
For example  
Press the Rotary Switch (1) to save the selected language  
LANGUAGE  
Press the programming key  
ENGLISH  
CUPS MADE  
Now press the Rotary Switch (1) to start programming the item  
CUPS MADE  
The total number of drawn off products is displayed.  
(4) to quit the programming  
mode or select the next programming item using the Rotary  
Switch (1).  
For example  
100  
Press one of the draw-off keys to learn the number of draw-off  
operations for the individual products (1 cup  
powder)  
READY  
, 2 cups  
20  
,
For example, press draw-off key for 1 cup  
15.10 Programming Display 24H/AM/PM  
READY  
Press programming key  
FILTER /
ߛ
 appears  
The number of pre-ground coffee drawn off can be checked  
by opening the filler funnel for pre-ground coffee.  
(4) until  
To quit, press the Rotary Switch (1).  
The illuminated ring (2) is active.  
CUPS MADE  
Turn the Rotary Switch (1) until  
DISPLAY appears  
Press the programming key  
(4) to quit the programming  
mode or select the next programming item using the Rotary  
Switch (1).  
Press the Rotary Switch (1)  
ML/OZ appears  
READY  
Turn the Rotary Switch (1) until  
24H/AM PM appears  
18  
Press the Rotary Switch (1)  
e.g. 24H  
16. Maintenance  
16.1 Filling in water  
Select a setting of your choice.  
FILL  
Press the Rotary Switch (1) to save the setting.  
WATER  
DISPLAY  
E
If this information is displayed, drawing off products is no  
longer possible. Refill water as described in Chapter 2.3.  
Press the programming key  
mode or select the next programming item using the Rotary  
Switch (1).  
(4) to quit the programming  
READY  
READY  
The water tank should be rinsed daily and refilled with fresh  
water. Only fill in fresh, cold water. Never fill in milk,  
mineral water or other liquids.  
15.11 Programming the display for ML/OZ  
READY  
Press programming key  
FILTER /
ߛ
 appears  
(4) until  
16.2 Emptying the coffee grounds container  
EMPTY  
The illuminated ring (2) is active.  
GROUNDS  
Turn the Rotary Switch (1) until  
DISPLAY appears  
If this message appears on the display, you can no longer  
draw off coffee. You must empty the coffee grounds con-  
tainer first (Fig. 14).  
Press the Rotary Switch (1)  
ML/OZ appears  
Press the Rotary Switch (1)  
e.g. ML  
Carefully take out the drip tray, it is filled with water.  
NO –  
TRAY  
Select a setting of your choice.  
Press the Rotary Switch (1) to save the setting.  
Insert the empty and clean trip tray again.  
DISPLAY  
READY  
Press the programming key  
(4) to quit the programming  
mode or select the next programming item using the Rotary  
Switch (1).  
The red water level indicator appears when the drip tray is  
full.  
READY  
19  
16.3 Drip tray missing  
READY  
CLEAN  
NO –  
TRAY  
16.7 IMPRESSA decalcify  
If this information is displayed, the drip tray (20) is not installed  
properly or was not installed at all.  
During operation, the machine will calcify. The degree of scaling  
depends on the hardness of the water in your region. The machine  
will inform you when de-scaling is required. You can still draw off  
coffee or hot water/steam. However, we recommend that you  
should de-scale the machine (Chapter 18) within the next few days.  
Insert the drip tray (20).  
READY  
16.4 Fill coffee beans  
READY  
DECALCIFY  
FILL  
BEANS  
Refill beans as described in Chapter 2.4.  
16.8 General cleaning instructions  
The message REFILL BEANS will disappear after you draw  
off your next cup of coffee.  
Never use scratching objects, pan cleaners, cleaning sponges or  
caustic chemicals to clean the machine.  
Wipe off the case on the inside and outside using a soft, moist  
cloth.  
We recommend that you clean the bean tank regularly before  
refilling beans, using a dry cloth. Before cleaning the tank,  
switch off the IMPRESSA.  
Clean the replaceable hot water nozzle after each use.  
To ensure that the Easy-Auto-Cappuccino Frother functions per-  
fectly, you should rinse it with water each time after preparing  
milk.  
16.5 Replacing the filter  
After drawing off 50 litres, the filter cartridge will be used  
up. A message requesting you to replace the filter will appear  
on the display.  
To ensure that the Easy-Auto-Cappuccino Frother functions per-  
fectly, you should clean it daily if you have prepared milk.  
The water tank should be rinsed daily and refilled with fresh  
water.  
Refer to Chapter 5.2 «Replacing the filter».  
If the water tank shows signs of scaling, remove the scaling  
using a commercial de-scaling solvent. Take out the water  
tank (Fig. 4).  
16.6 Cleaning the IMPRESSA  
After 200 draw-off operations or after 160 rinsing operations, the  
IMPRESSA must be cleaned. A message appears on the display,  
telling you to start the cleaning programme. You can still draw off  
coffee or hot water/steam. However, we recommend that you  
should clean the machine (Chapter 17) within the next few days.  
Remove the Claris filter cartridge, if installed, before de-  
scaling the water tank.  
20  
16.9 Emptying the system  
Press the maintenance key  
displayed:  
(7) until the following message is  
Precondition: IMPRESSA switched off  
EMPTY  
TRAY  
This operation is required to protect the IMPRESSA against  
frost damage during transports.  
Empty the tray  
E
NO  
TRAY  
Place a container under the Easy-Auto-Cappuccino Frother (15)  
(Fig. 10).  
Insert the tray again.  
Press the steam preselection key  
(8) until the following  
Remove the drip grate (19).  
message is displayed:  
Put a container (Fig. 12) under the adjustable coffee spout (17).  
OPEN TAP  
EMPTYING  
CLOSE TAP  
PRESS  
RINSE  
Press the maintenance key  
(7).  
The IMPRESSA is switched off.  
CLEANING  
FILL  
17. Cleaning  
TABLET  
Your IMPRESSA features an integrated cleaning program. The  
cleaning operation will take some 15 min.  
Fill in the tablet (see Fig. 15)  
PRESS  
RINSE  
Original JURA cleaning tablets which are specially designed  
for the cleaning programm of your IMPRESSA are available  
at your authorized dealer. Please note that machine defects or  
residues in the water cannot be excluded if you use inappro-  
priate cleaning solvents.  
Press the maintenance key  
(7).  
CLEANING  
EMPTY  
TRAY  
NO  
TRAY  
Once started, the de-scaling operation must not be inter-  
rupted!  
READY  
After each cleaning operation the filler funnel for pre-ground  
coffee should be cleaned (11).  
Wipe coffee powder tank with a dry cloth after the cleaning  
program has finished.  
The cleaning operation was completed successfully.  
READY  
CLEAN  
21  
18. De-scaling  
NO –  
TRAY  
Your IMPRESSA features an integrated de-scaling program. The  
de-scaling operation will take some 40 min.  
Insert the tray again.  
SOLVENT  
IN TANK  
Original JURA de-scaling tablets wich are specially designed  
for the de-scaling program of your IMPRESSA are available  
at your authorized dealer. Please note that machine defects or  
residues in the water cannot be excluded if you use inappro-  
priate de-scaling solvents.  
Completely dissolve the content of one blister (3 tablets) in a jug  
containing 0.5 litres of water, and fill the mixture in the water tank.  
Reinstall the water tank.  
If the IMPRESSA needs de-scaling, the corresponding mes-  
sage is displayed.  
You can still draw off coffee or hot water/steam and start the  
de-scaling program later.  
Before starting the de-scaling program, the machine must be  
switched off. Once started, the de-scaling operation must not  
be interrupted.  
OPEN TAP  
SOLVENT  
IN TANK  
Put a sufficiently large container under the hot water spout  
(Fig. 17).  
Open the steam / hot water draw-off valve (14) (Fig. 13).  
DE-SCALING  
CLOSE TAP  
When using the de-scaling solvent, immediately remove any  
splashes or drips from sensitive surfaces, i.e. natural stone  
and wooden surfaces, or take appropriate precautions.  
Close the steam / hot water draw-off tap (14).  
DE-SCALING  
In any case wait until the de-scaling solvent is used up and  
the tank is empty. Never refill de-scaling solvent.  
EMPTY  
TRAY  
Empty the tray  
NO –  
TRAY  
Insert the tray again.  
READY  
DECALCIFY  
Switch off the IMPRESSA using the ON/OFF key  
(3).  
Remove the Easy-Auto-Cappuccino Frother (15) (Fig. 17).  
FILL  
Press the maintenance key  
(7) until the following message is  
WATER  
displayed:  
EMPTY  
TRAY  
Rinse the water tank thoroughly and fill it with cold, fresh  
tap water. Install it again.  
Empty the tray  
22  
20. Tips for perfect coffee  
OPEN  
TAP  
Height-adjustable coffee spout (17)  
You can adjust the height of the coffee spout to the size of your  
cups (Fig. 3)  
Open the steam / hot water draw-off tap (14) (Fig. 13).  
DE-SCALING  
CLOSE TAP  
Grinding degree  
Refer to Chapter 2.5 «Adjusting the grinding gear».  
E
After you have closed the steam / hot water draw off tap (14),  
the following message is displayed  
DE-SCALING  
Preheating cups  
You can preheat the cups using hot water or steam. The smaller the  
coffee you want to draw off, the more important preheating is.  
EMPTY  
TRAY  
Empty the tray  
NO –  
TRAY  
Insert the tray again.  
Sugar and cream  
Stirring coffee/tea will result in heat being released. Adding  
refrigerated cream or milk will reduce the temperature of the coffee  
significantly.  
PRESS  
RINSE  
Press the maintenance key  
(7).  
RINSING  
READY  
The de-scaling operation was completed successfully.  
19. Disposal  
Please dispose of old machines in an environmentally  
compatible way  
Old machines contain valuable materials capable of being  
recycled which should be salvaged for recycling. Please  
therefore dispose of old machines via suitable collection  
systems.  
23  
21. Messages  
Cause  
Remedy  
FILL WATER  
Water tank is empty.  
Float defective  
Refill water  
Rinse or de-scale water tank  
Refill beans  
FILL BEANS  
Bean tank is empty.  
Although you have refilled beans, the  
message still appears.  
Draw off a cup of coffee. The message will  
disappear only after you have drawn off a cup  
of coffee  
EMPTY GROUNDS  
Coffee grounds container full  
Tray reinstalled too early after emptying  
Drip tray not installed properly or missing  
Cleaning required  
Empty coffee grounds container  
Wait 10 sec. before reinstalling the tray  
Install tray properly  
NO TRAY  
READY CLEAN  
READY SCALED  
READY FILTER  
FAULT  
Start cleaning programme (Chapter 17)  
Start de-scaling programme (Chapter 18)  
Replace filter (Chapter 5.2)  
De-scaling required  
Filter used up  
General fault  
- switch off  
- disconnect from mains supply  
- Connect IMPRESSA to power supply  
- Switch on IMPRESSA  
- Have IMPRESSA checked by  
- JURA Service  
24  
22. Problems  
Problem  
Cause  
Remedy  
Very loud noise coming from the  
grinding gear  
Foreign body in grinding gear  
Drawing off pre-ground coffee still possible  
Have IMPRESSA checked by JURA Service  
E
Too little froth when  
frothing milk  
Easy Cappuccino Frother has become  
dirty  
Clean the Easy-Auto-Cappuccino Frother  
(Chapter 13)  
Individual parts of the Easy-Auto-  
Cappuccino Frother are incorrectly  
assembled  
Check correct assembly of the  
Easy-Auto-Cappuccino Frother  
Coffee only drips  
from the coffee spout  
Grinding degree too fine  
Pre-ground coffee too fine  
Coarser grinding gear adjustment  
Use a coarser pre-ground coffee  
High-frequency, electromagnetic interference may influence the display. Drawing off coffee is possible at any time.  
If the messages or problems still persist, please contact your local authorized dealer or JURA Elektroapparate AG.  
25  
23. Legal information  
24. Technical data  
Voltage:  
These operating instructions contain all the information required  
for using, operating and maintaining the machine properly.  
230V AC  
1450 W  
10 A  
Power:  
Knowledge of and compliance with the specifications contained in  
these operating instructions is required for using the machine safely  
as well as for operational safety and safety during maintenance.  
These operating instructions cannot cover any conceivable appli-  
cation. The machine was designed for private household use.  
Additionally we point out that the content of these operating  
instructions does not form part of any previous or existing agree-  
ment, consent or al legal relationship nor does it constitute a  
change of such an agreement, consent or legal relationship. Any  
obligations to be fulfilled by JURA Elektroapparate AG are stipu-  
lated in the corresponding purchase contract, which also contains  
the full and solely applicable warranty stipulations. These con-  
tractual warranty stipulations are neither extended nor limited by  
the specifications contained in these operating instructions.  
Intensity of current:  
Safety check:  
Energy consumption Standby:  
approx. 3.5 Wh  
Energy consumption  
«Ready for draw-off» mode:  
approx. 11.5 Wh  
static, max. 15 bar  
1.9 litres  
Pump pressure:  
Water tank:  
Bean tank capacity:  
Coffee grounds container capacity :  
Length of cable:  
Weight:  
200gr  
max. 16 portions  
approx. 1.1 m  
9.1 kg  
The operating instructions contain information, protected by Copy-  
right. Photocopying or translations into other languages shall not be  
permissible without JURA Elektroapparate AG’s written approval.  
Size (WxHxD):  
28 x 34.5 x 44.5 cm  
The machine complies with the following EU directives:  
73/23/EWG dated 19/02/1973 "Low Voltage Directive" including  
Modification Directive 93/336/EWG  
89/336/EWG dated 03/05/1989 "EMC Directive" including  
Modification Directive 92/31/EWG  
26  

Nikon Cell Phone Accessories S6500 User Manual
Marantz SA7001 User Manual
LG Electronics VX8350 User Manual
Lexicon RT 20 User Manual
La Crosse Technology Clock 616 146A User Manual
JVC KDADV5380 User Manual
Huawei Technologies Cell Phone H881C User Manual
CyberPower Computer Drive CS150U48V3 User Manual
COBY electronic CRA59 User Manual
Casio DQS 20 User Manual