Jura Capresso F707 User Manual

IMPRESSA F70/F707  
Instructions for use  
9/06  
Fig. 1  
Fig. 2  
Fig. 3  
Fig. 4  
Fig. 9  
Fig. 14  
Fig. 5  
Fig. 6  
Fig. 7  
Fig. 8  
Fig. 10  
Fig. 11  
Fig. 12  
Fig. 13  
Fig. 15  
Fig. 16  
Fig. 17  
Fig. 18  
Fig. 19  
Fig. 20  
Temp. max.  
Fig. 21  
Temp. min.  
Control elements  
9
8
3
7
1. Rotary Switch  
2. Illuminated ring  
3. ON / OFF symbol  
4. 1 LARGE CUP symbol  
5. 1 COFFEE symbol  
4
21 22 23  
5
6
6. 1 ESPRESSO symbol  
7. MAINTENANCE symbol  
8. START symbol  
11  
12  
13  
9. Display dialog system  
10. Water tank with handle  
11. Filler funnel for pre-ground coffee  
12. Bean tank cover  
10  
9
14  
2
13. Aroma preservation cover  
14. Steam / hot water draw-off tap  
15. Profi-Auto-Cappuccino Frother with milk pipe  
16. Interchangeable hot water nozzle (see Fig. 5)  
17. Height-adjustable coffee spout  
18. Coffee grounds container  
19. Drip grate  
1
15/16  
17  
18  
20. Drip tray  
24  
21. MILD symbol  
22. NORMAL symbol  
19  
23. STRONG symbol  
24. Power switch  
20  
Contents  
1. Safety information..........................................page  
7
7
7
7
7
7
7
8
8
8
8
9
15. Programming ................................................page 17  
15.1 Programming the filter ...........................page 17  
15.2 Programming the water hardness ..............page 17  
15.3 Maintenance menu.................................page 17  
15.4 Programming the aroma INTENSIVE  
1.1  
1.2  
Warning..............................................page  
Precautions..........................................page  
2. Preparing the IMPRESSA................................page  
2.1  
2.2  
2.3  
2.4  
2.5  
2.6  
Check supply voltage..............................page  
Check electrical fuse ..............................page  
Fill water tank......................................page  
Fill coffee beans....................................page  
Adjusting the grinding gear .....................page  
Power switch........................................page  
or STANDARD .....................................page 17  
15.5 Programming the temperature..................page 18  
15.6 Programming the time............................page 18  
15.7 Programming the automatic  
switch-on time ......................................page 19  
3. First use.......................................................page  
15.8 Programming the automatic  
4. Adjusting the water hardness ............................page  
switch-off time......................................page 19  
5. Installation of CLARIS plus filter cartridges ........page 10  
15.9 Cup counter .........................................page 19  
15.10 Programming the language......................page 19  
15.11 Programming Display 24H/AM/PM ...........page 20  
15.12 Programming the display for ML/OZ..........page 21  
15.13 Exit programming mode .........................page 21  
16. Maintenance .................................................page 21  
16.1 Filling in water.....................................page 21  
16.2 Emptying the coffee grounds container .......page 21  
16.3 Drip tray missing...................................page 22  
16.4 Fill coffee beans....................................page 22  
16.5 Replacing the filter................................page 22  
16.6 Cleaning the IMPRESSA ........................page 22  
16.7 IMPRESSA calcified .............................page 22  
16.8 General cleaning instructions ...................page 22  
16.9 Emptying the system ..............................page 23  
17. Cleaning.......................................................page 23  
17.1 Cleaning without display request ...............page 24  
18. De-scaling.....................................................page 24  
18.1 Decalcifying without display request ..........page 25  
19. Disposal .......................................................page 25  
20. Tips for perfect coffee .....................................page 26  
21. Messages......................................................page 27  
22. Problems......................................................page 28  
23. Legal information...........................................page 29  
24. Technical data ...............................................page 29  
5.1  
5.2  
5.3  
Installing the filter ................................page 10  
Replacing the filter................................page 10  
Changing the filter without display request..page 11  
6. Rinsing the IMPRESSA...................................page 11  
6.1  
Rinsing the IMPRESSA  
without display request ...........................page 11  
7. Adjusting the water quantity for coffee................page 11  
8. Making 1 cup of coffee....................................page 12  
9. Making 2 cups of coffee...................................page 12  
10. Drawing off pre-ground coffee ...........................page 13  
11. Drawing off hot water .....................................page 13  
12. Dispensing steam............................................page 14  
13. Dispensing Cappuccino with the Professional  
Cappuccino Frother.........................................page 14  
13.1 Dispensing Hot Milk with the  
Professional Cappuccino Frother...............page 15  
13.2 Cleaning of the Professional Cappuccino  
Frother ..............................................page 15  
13.3 Rinsing the Professional Cappuccino  
Frother ..............................................page 16  
13.4 Cleaning the Professional Cappuccino  
Frother ..............................................page 16  
14. Switching off the IMPRESSA ...........................page 16  
6
If you don’t use the machine for a longer time (holidays, etc.)  
always disconnect the mains cable.  
Introduction  
Thank you for purchasing the IMPRESSA. To ensure perfect func-  
tioning of your IMPRESSA, carefully read this operating manual  
and keep it for future reference.  
Should you need more information or if you encounter particular  
problems not specified in these operating instructions in sufficient  
detail, either contact us directly or contact your local authorized  
dealer.  
Always disconnect mains cable before cleaning the machine.  
When disconnecting the mains cable never pull on the mains  
cable or the machine itself.  
E
The coffee machine is connected to mains supply via a mains  
cable. Make sure nobody can trip over the mains cable. Make  
sure children and pets cannot reach the machine  
Never put the coffee machine or individual parts of it into a  
dishwasher.  
You will also find useful tips on operation and maintenance  
Make sure to install the machine at a place with sufficient air  
circulation, to prevent overheating of the machine.  
1. Safety information  
1.1 Warning  
2. Preparing the IMPRESSA  
2.1 Check supply voltage  
Children do not realize the dangers involved in using electric  
appliances, for this reason always keep an eye on children when  
they use electric appliances.  
The IMPRESSA is preset in the factory to the correct mains  
voltage. Check if your local mains supply voltage complies with  
the information given on the type plate on the underside of the  
IMPRESSA.  
The coffee machine may only be used by instructed persons.  
Never use a defective coffee machine or a machine with a  
defective mains cable.  
2.2 Check electrical fuse  
Never repair or open the coffee machine yourself. Any repairs  
may only be carried out by authorized service shops using ori-  
ginal spare parts and accessories.  
The IMPRESSA is designed for an electric current of 10 amperes.  
Check if the electrical fuse has sufficient capacity.  
Never immerse the coffee machine in water.  
2.3 Fill water tank  
Only use fresh, cold water. Never fill in milk, mineral water  
or other liquids.  
1.2 Precautions  
Never expose the coffee machine to weather (rain, snow, frost),  
never touch the machine when your hands are wet.  
Remove the water tank and rinse it with cold tap water  
thoroughly (Fig. 4).  
Place the IMPRESSA on a firm, level base that is resistant to  
any water that may leak. Never stand on hot or warm surfaces  
(oven hobs). Keep out of the reach of children.  
7
Then fill the water tank and reinstall it. Make sure to install the  
tank properly, it must engage audibly.  
2.6 Power switch  
Actuate the power switch (24) on your IMPRESSA before  
using the machine for the first time.  
2.4 Fill coffee beans  
We recommend that you switch off your IMPRESSA with  
the power switch (24) if you intend not to use the machine  
for longer periods of time (e.g.during holidays).  
To ensure that your machine will work perfectly for a long  
time and to avoid damage, please note that the grinding gear  
of your JURA coffee machine is not suitable for coffee beans  
which were treated, during or after roasting, with additives  
(e.g. sugar). Such coffee blends may damage the grinding  
gear. Any repair costs resulting from the use of such blends  
are not covered by warranty.  
3. First use  
Fill coffee beans in the bean tank (12).  
Switch on the IMPRESSA using the power switch (24).  
Open the bean tank cover (12) and remove the aroma preser-  
vation cover (13).  
Your IMPRESSA is in standby mode.  
Remove any dirt or foreign matter from the bean tank.  
Touch the  
(3) symbol  
Fill coffee beans in the bean tank and close the cover.  
SPRACHE  
DEUTSCH  
2.5 Adjusting the grinding gear  
The illuminated ring (2) is active.  
Turn the rotary switch (1) until the required language is dis-  
played (Fig. 17).  
You can adjust the grinding gear to the roast of your coffee. We  
recommend  
For example  
LANGUAGE  
ENGLISH  
a fine grinding degree Ǟ for bright roasts (the smaller the dots,  
the finer the grinding)  
a coarse degree  
Ǟ
for dark roasts (the larger the dots, the  
coarser the grinding)  
Confirm your selection by pressing the rotary switch (1) (Fig. 17).  
FILL  
WATER  
The grinding degree may only be adjusted while the grinding  
gear is running.  
Fill the water tank (10) with fresh water.  
OPEN TAP  
Open the bean tank cover (12) and remove the aroma preser-  
vation cover (13).  
Place a receptacle under the Professional Cappuccino Frother  
(15) (Fig. 10).  
To adjust the grinding degree, turn the rotary switch (Fig. 2) to  
the required position.  
Open the steam / hot water draw-off tap (14) (Fig. 12).  
FILLING  
SYSTEM  
8
The displayed information means the following:  
LEVEL –– Water hardness function switched off  
CLOSE TAP  
Close the steam / hot water draw-off tap (14).  
LEVEL 1 German water hardness degree 1 to 7°  
French Water hardness degree 1.79 – 12.53°  
FILLING SYSTEM  
HEATING  
LEVEL 2 German water hardness degree 8 to 15°  
French Water hardness degree 14.32 – 26.85°  
PRESS  
MAINT.  
E
LEVEL 3 German water hardness degree 16 to 23°  
French Water hardness degree 28.64 – 41.14°  
Touch the symbol  
(7).  
Machine carries out a rinsing operation.  
LEVEL 4 German water hardness degree 24 to 30°  
French Water hardness degree 42.96 – 53.7°  
RINSING  
READY  
When the IMPRESSA leaves the factory it is adjusted to LEVEL  
3. You can adjust another hardness. To do this, proceed as follows:  
If BEANS FILL is displayed, press the coffee draw-off key  
again. Machine not filled with coffee beans yet.  
READY  
Press the Rotary Switch (1) until  
To get an excellent crema, adjust the coffee spout (17) to the  
size of your cup (Fig. 3).  
FILTER /
ߛ
 appears  
FILTER –  
Turn the Rotary Switch (1) until the following message is dis-  
played:  
4. Adjusting the water hardness  
Water is heated in the IMPRESSA. As a result, calcification  
occurs during normal use and is indicated automatically.  
Before using the IMPRESSA for the first time the hardness  
of the water used must be adjusted. Use the supplied test  
sticks for this.  
HARDNESS  
Now press the Rotary Switch (1) to start the programming.  
LEVEL 3  
Turn the Rotary Switch (1) until the required level is displayed.  
For example, LEVEL 4  
Press the Rotary Switch (1) to confirm the required level.  
HARDNESS  
1° German hardness is equivalent to 1.79° French hardness.  
If the filter is activated, the program step Water Hardness no  
longer appears.  
Turn the Rotary Switch (1) until  
EXIT appears  
Press the Rotary Switch (1) to leave the programming mode.  
The IMPRESSA has 5 hardness degrees which can be used  
and are displayed while you are adjusting the water hardness.  
READY  
9
If not installed already, insert the CLARIS plus filter.  
5. Installation of CLARIS plus filter cartridges  
Open the steam / hot water draw-off tap (14) (Fig.12).  
If the CLARIS plus filter cartridge is installed properly,  
de-scaling of the coffee machine is no longer required. For  
more information on the CLARIS plus filter cartridge refer  
to brochure «CLARIS plus. Hard on limescale. Gentle on  
your coffee machine.»  
RINSING  
FILTER  
CLOSE TAP  
Close the steam/hot water draw-off tap (14), now the IM-  
PRESSA will heat up to coffee temperature.  
5.1 Installing the filter  
HEATING UP  
READY  
Draw off 1/2 litre of water to rinse filter completely. In order  
to ensure perfect operation, close tap (14) only after the dis-  
play says  
Now you have activated the filter. In Programming Mode the  
water hardness selection function is no longer displayed.  
CLOSE TAP  
Fold up the cartridge holder. Install the filter cartridge in the  
water tank, applying a gentle pressure (Fig. 1).  
5.2 Replacing the filter  
Draw off 1/2 litre of water to rinse filter completely. In order  
to ensure perfect operation, close tap (14) only after the dis-  
play says  
Fold down the cartridge holder again until it engages audibly.  
Fill the water tank with cold, fresh tap water and install it again.  
Press the Rotary Switch (1) until  
CLOSE TAP  
FILTER /
ߛ
 appears  
After drawing off approx. 50 litres, the filter cartridge will be  
used up. A message requesting you to replace the filter will  
appear on the display. The scale on the cartridge holder in  
the water tank will tell you how much longer you can use the  
CLARIS plus filters.  
FILTER –  
Press the Rotary Switch (1) to start the programming.  
NO –  
Turn the Rotary Switch (1) until the following message is dis-  
played:  
CHANGE FILTER / MACHINE READY  
symbol (7).  
YES 
ߛ
 
Touch the  
Press the Rotary Switch (1) to activate the filter cartridge.  
REPLACE  
OPEN TAP  
INSERT  
OPEN TAP  
Remove the water tank from the machine and empty it.  
Put a sufficiently large container (at least 0.5 litre) under the Pro-  
fessional Cappuccino Frother (15) (Fig. 10).  
Fold up the cartridge holder. Install the filter cartridge in the  
water tank, applying a gentle pressure (Fig. 1).  
Turn the selector switch of the Professional Cappuccino Frother  
(15) to the steam position (Fig. 20).  
Fold down the cartridge holder again until it engages audibly.  
10  
Fill the water tank with cold, fresh tap water and reinstall it.  
Touch the  
symbol (3).  
Place a sufficiently large receptacle (at least 1/2 litre) under the  
Professional Cappuccino Frother (15) (Fig. 10).  
HEATING UP  
PRESS  
MAINT.  
Turn the selector switch of the Professional Cappuccino Frother  
(15) to the steam position (Fig. 20).  
Touch the  
symbol (7).  
RINSING  
READY  
E
Open the tap for dispensing steam/hot water (14) (Fig. 12).  
RINSING  
FILTER  
CLOSE TAP  
6.1 Rinsing the IMPRESSA without display request  
Open the steam / hot water draw-off tap (14) (Fig. 12).  
Press the Rotary Switch (1) until  
HEATING UP  
READY  
FILTER /
ߛ
 appears.  
Turn the Rotary Switch (1) until  
MAINTENANCE appears.  
5.3 Changing the filter without display request  
Press the Rotary Switch (1) to confirm.  
Press the Rotary Switch (1) until  
RINSE  
FILTER 
ߛ
 appears.  
Press the Rotary Switch (1) again to confirm.  
Press the Rotary Switch (1) to confirm.  
RINSING  
READY  
YES 
ߛ
 
Press the Rotary Switch (1) again to confirm.  
INSERT/OPEN TAP  
The program “Change filter” is now active. Now proceed as  
7. Adjusting the water quantity for coffee  
The indicated value in ML is a reference value and may  
deviate from the actual value  
described in Chapter 5.2 from  
TAP onwards.  
REPLACE/OPEN  
You can change/stop the water quantity during the draw-off  
operation, too. Turn the rotary switch (1) until the required  
ML value is displayed.  
6. Rinsing the IMPRESSA  
When the IMPRESSA is switched off and has cooled down,  
a rinsing operation is started when the machine is switched  
on again. When the machine is switched off, a rinsing  
operation is started automatically.  
You can adjust the water quantity in steps of 5 ML using the  
Rotary Switch (1).  
READY  
11  
Turn the Rotary Switch (1) until the required water quantity is  
displayed.  
e.g. 120 ML  
COFFEE  
For example,  
120 ML  
Your coffee is being prepared.  
READY  
8. Making 1 cup of coffee  
You can choose from 3 different coffee strengths. Touch one  
9. Making 2 cups of coffee  
of the symbols  
coffee. MILD  
/
/
to select the strength of your  
You cannot choose the strength of the coffee when making  
2 cups. The machine automatically makes 2 mild cups of  
coffee.  
NORMAL STRONG.  
You can set the amount of water you want with the Rotary  
Switch (1) prior to drawing off coffee  
You can set the amount of water you want with the Rotary  
Switch (1) prior to drawing off coffee  
Touch the  
maturely.  
(8) symbol to stop drawing off coffee pre-  
Touch the  
maturely.  
(8) symbol to stop drawing off coffee pre-  
The amount of coffee water you used last is saved by the  
IMPRESSA until the next time you make coffee.  
The amount of coffee water you used last is saved by the  
IMPRESSA until the next time you make coffee.  
Press the Rotary Switch (1) briefly to check how much  
coffee water you used last.  
Press the Rotary Switch (1) briefly to check how much  
coffee water you used last.  
READY  
Place a cup under the height-adjustable coffee spout (17).  
READY  
Touch the  
(5).  
Place two cups under the height-adjustable coffee spout (17).  
COFFEE symbol  
Touch the coffee draw-off symbol of your choice twice  
Select an aroma by touching one of the symbols  
2 COFFEE  
E.g.  
(STRONG aroma)  
STRONG  
120 ML (water quantity last adjusted).  
The illuminated ring (2) is active.  
Touch the  
(8) symbol  
Turn the Rotary Switch (1) until the required amount of coffee  
160 ML (water quantity last adjusted).  
water appears on the display (9).  
The illuminated ring (2) is active.  
e.g. 210 ML  
2 COFFEE  
Turn the Rotary Switch (1) until the required amount of coffee  
water appears on the display (9).  
12  
Your coffee is being prepared.  
READY  
Turn the Rotary Switch (1) again to select the water quantity  
individually:  
For Example:  
COFFEE  
Your product is being prepared.  
READY  
210 ML  
10. Drawing off pre-ground coffee  
Never use instant coffee or quick-coffee. We recommend  
that you always use powder from fresh coffee beans or, pre-  
ground, vacuum-packed coffee. Never fill in more than 2  
portions of powder. The pre-ground coffee tank is no storage  
tank. Make sure that the pre-ground you use is not too fine.  
This may cause blocking of the system. In this case the  
coffee only drips out of the coffee spout.  
E
11. Drawing off hot water  
The amount of hot water you used last is saved by the  
IMPRESSA until the next time you make coffee.  
Install the hot water nozzle (see Fig. 5) to obtain perfect  
water flow. Do not replace the replaceable hot water nozzle  
(16) directly after drawing off water, because the nozzle is  
hot after the draw-off operation.  
If you have filled in too little powder, the message NOT  
ENOUGH POWDER will be displayed. The IMPRESSA  
stops the operation and returns to "ready for draw off" mode.  
You can stop the draw-off operation at any time by pressing  
any coffee draw-off key.  
At the start of the water draw-off operation there can be  
splashing Avoid direct contact with the skin!  
READY  
READY  
Put 1 or 2 cups under the adjustable coffee spout (17).  
Place a cup under the replaceable hot water nozzle (16).  
Open the steam / hot water draw-off tap (14) (Fig. 12).  
The illuminated ring (2) is active.  
Open the cover of the filler funnel for pre-ground coffee (11).  
FILL  
POWDER  
STEAM  
(8) symbol  
140 ML  
Fill 1 or 2 level spoonfuls of pre-ground coffee in the filler  
funnel for pre-ground coffee (11) (Fig. 15) and close the cover.  
Touch the  
SELECT  
KEY  
For example,  
WATER  
Press the required draw-off key.  
Adjust the required water quantity by turning the rotary switch  
Touch the  
(8) symbol  
(1).  
120 ML (water quantity last adjusted)  
For example,  
WATER  
200 ML  
The illuminated ring (2) is active.  
13  
If the required water quantity is reached, the following message  
You can adjust the steam draw-off time individually by turning  
is displayed:  
the rotary switch (1) until the required SEC are displayed.  
CLOSE TAP  
For example,  
35 SEC  
Close the steam / hot water draw-off tap (14).  
If you do not change the steam draw-off time settings using the  
rotary switch (1), the machine will use the settings last adjusted.  
READY  
During the steam draw-off operation, the message STEAM is  
displayed.  
Before CLOSE TAP water may still escape the system.  
When the steam quantity is reached, the message CLOSE TAP is  
displayed.  
12. Dispensing steam  
Close the steam / hot water draw-off tap (14).  
READY  
The steam function is used for the preparation of milk foam  
and hot milk, as well as for the Professional Cappuccino  
Frother (15) cleaning programme.  
At any time, you can abort steam dispensing early, by clos-  
ing the tap for dispensing steam/hot water (14).  
With the optionally available 2-stage frothing nozzle, liquids  
can be heated and frothed using the steam function.  
Before CLOSE TAP, steam may still escape the system.  
Make sure that the nozzle is correctly fitted when drawing  
steam. If the nozzle becomes blocked with particles of milk  
residue or is incorrectly assembled, a danger can arise during  
use whereby the nozzle may jump off.  
13. Dispensing Cappuccino with the  
Professional Cappuccino Frother  
Cappuccino comprises one third each of Espresso, hot milk  
and milk foam. You produce the milk portion with the Pro-  
fessional Cappuccino Frother (15).  
When steam is drawn, a vacuum is produced which, with the  
aid of the Professional Cappuccino Frother (15), draws in the  
milk and produces milk foam.  
Due to the system design, some water will escape at first  
when steam is drawn. However, this will not affect the result  
in any way.  
When drawing steam, spluttering can occur at the start. The  
nozzle becomes hot in use. Avoid any direct skin contact.  
To ensure perfect function, the Professional Cappuccino  
Frother (15) must be cleaned regularly.  
READY  
To draw off steam, open the steam/hot water draw-off tap (14)  
(Fig. 12).  
Make sure that the nozzle is correctly fitted. If the nozzle be-  
comes blocked with particles of milk residue or is incorrectly  
assembled, a danger can arise during use whereby the nozzle  
may jump off.  
The illuminated ring (2) is active.  
STEAM  
14  
When using for the first time, remove the protective cover from  
the Professional Cappuccino Frother (15) (Fig. 6). The protective  
cover is used only during transport as protection to prevent the  
ingress of contaminated materials.  
During the steam draw-off operation, the message STEAM is  
displayed.  
When the steam quantity is reached, the message CLOSE TAP is  
displayed.  
Remove the milk pipe from the Welcome Pack and connect it to  
the Professional Cappuccino Frother (15).  
Close the steam / hot water draw-off tap (14).  
E
READY  
Insert the other end of the milk pipe into a Tetra Pak of milk or  
connect it to a milk container (Fig. 7).  
Due to the system design, steam can still escape and some  
milk may continue to drip before the TAP is closed.  
Place a cup under the Professional Cappuccino Frother (15)  
(Fig. 7).  
At any time, you can abort steam dispensing early, by clos-  
ing the tap for dispensing steam/hot water (14).  
A useful addition is available for all lovers of milk speciali-  
ties in the form of high-quality vacuum milk containers.  
They keep the milk cool the whole day long and are opti-  
mally suited to the design of your IMPRESSA.  
All original JURA accessories can be obtained from the  
specialist shop.  
Now, move your cup with the milk foam and place it under the  
coffee spout and dispense the required coffee product. (Fig. 8).  
Your Cappuccino is ready.  
13.1 Dispensing Hot Milk with the  
Professional Cappuccino Frother  
Turn the selector switch of the Professional Cappuccino Frother  
(15) to the milk foam position (Fig. 19).  
Turn the selector switch of the Professional Cappuccino  
Frother (15) to the milk range (Fig. 21).  
The procedure for dispensing hot milk is the same as the  
procedure for dispensing milk foam for Cappuccino (Chapter  
13).  
READY  
Open the steam / hot water draw-off tap (14) (Fig. 12). The milk  
foam is prepared.  
The illuminated ring (2) is active.  
STEAM  
You can adjust the steam draw-off time individually by turning  
the rotary switch (1) until the required SEC are displayed.  
13.2 Cleaning of the  
Professional Cappuccino Frother  
For example,  
35 SEC  
To ensure that the Professional Cappuccino Frother functions  
perfectly, you should rinse it with water each time after  
preparing milk.  
If you do not change the steam draw-off time settings using the  
rotary switch (1), the machine will use the settings last adjusted.  
Adjust the steam dispensing time to suit the size of your cup.  
You will not be prompted by your IMPRESSA to rinse the  
Professional Cappuccino Frother.  
15  
Draw steam until the receptacle with the Auto-Cappuccino  
Cleaner is empty.  
This procedure cleans the Professional Cappuccino Frother and  
the milk pipe.  
13.3 Rinsing the Professional Cappuccino Frother  
Carefully pull off the Professional Cappuccino Frother from your  
IMPRESSA.  
Dismantle the Professional Cappuccino Frother (15) into its indi-  
vidual parts (Fig. 16).  
Close the steam / hot water draw-off tap (14).  
READY  
Thoroughly rinse all parts of the nozzle under running water.  
Reassemble the Professional Cappuccino Frother (15) and refit it  
Before CLOSE TAP water may still escape the system.  
on to your IMPRESSA.  
Fill the receptacle with 2.5 dl of fresh water.  
Dip the milk pipe into the receptacle with the fresh water.  
13.4 Cleaning the Professional Cappuccino Frother  
To ensure that the Professional Cappuccino Frother (15)  
functions perfectly, you should clean it daily if you have pre-  
pared milk foam or hot milk.  
Open the tap for dispensing steam/hot water (14) (Fig. 12) in or-  
der to draw steam.  
Draw steam until the receptacle with the fresh water is empty.  
This procedure rinses the Professional Cappuccino Frother (15)  
and the milk pipe with fresh water.  
You will not be prompted by your IMPRESSA to clean the  
Professional Cappuccino Frother (15).  
Cleaning of the Professional Cappuccino Frother (15) is now  
complete, your IMPRESSA is ready for use.  
You can obtain the JURA Auto-Cappuccino Cleaner from  
the specialist shop.  
14. Switching off the IMPRESSA  
Place a receptacle under the Professional Cappuccino Frother  
In order to ensure perfect operation, please don’t switch off  
your IMPRESSA at the power switch (24) before all the  
(15) (Fig. 9).  
Fill a second receptacle with 2.5 dl of fresh water and add one  
capful of the Auto-Cappuccino Cleaner.  
symbols on the display (9) have gone off except for  
(3).  
Dip the milk pipe into the second receptacle with the Auto-Cap-  
puccino Cleaner (Fig. 9).  
READY  
Switch off the IMPRESSA using the ON/OFF key  
RINSING  
(3).  
Turn the selector switch of the Professional Cappuccino Frother  
(15) to the milk position (Fig. 21) or to the milk foam position  
(Fig. 19).  
An automatic rinsing operation is started.  
READY  
Your IMPRESSA is in standby mode.  
Open the steam / hot water draw-off tap (14) (Fig. 12).  
16  
15. Programming  
15.3 Maintenance menu  
When your IMPRESSA leaves the factory it is adjusted such  
READY  
that you can draw off coffee without having to change any  
settings. However, you can programme various parameters  
individually.  
Press the Rotary Switch (1) until  
FILTER /
ߛ
 appears  
The illuminated ring (2) is active.  
E
Turn the Rotary Switch (1) until  
You can programme the following stages:  
MAINTENANCE appears  
¼ Filter  
Press the Rotary Switch (1)  
¼ Water hardness  
¼ Maintenance  
¼ Aroma  
RINSE  
Turn the Rotary Switch (1) until the required program item ap-  
pears on the display (9).  
¼ Temperature  
¼ Time  
e.g. RINSE, CLEAN, FILTER, DE-SCALE or EXIT  
e.g. CLEAN  
¼ Automatic switch-on time  
¼ Automatic switch-off time  
¼ Draw-offs  
Press the Rotary Switch (1)  
¼ Language  
The cleaning program starts.  
¼ Display  
EMPTY TRAY  
¼ Exit  
Continue with Chapter 17 Cleaning, from point 3  
To start programming, press the Rotary Switch (1) until  
EMPTY TRAY  
FILTER /
ߛ
 appears  
15.4 Programming the aroma INTENSIVE  
or STANDARD  
Rotary switch  
Turn the Rotary Switch to change the adjusted values or to  
select the next programming step.  
Press the Rotary Switch to check the values adjusted or to  
save the values selected (Fig. 17).  
When the machine leaves the factory, the aroma is set to  
intensive. If requested it can also be set to Standard.  
READY  
15.1 Programming the filter  
Press the Rotary Switch (1) until  
FILTER /
ߛ
 appears  
Refer to Chapter 5.1 «Inserting the filter».  
The illuminated ring (2) is active.  
Turn the Rotary Switch (1) until Aroma is displayed.  
15.2 Programming the water hardness  
AROMA  
Refer to Chapter 4 «Adjusting the water hardness».  
17  
Press the Rotary Switch (1).  
INTENSIVE  
15.6 Programming the time  
You must programme the time if you want to use the auto-  
matic switch-on function.  
Turn the Rotary Switch (1) until the following message is dis-  
played:  
READY  
STANDARD  
Press the Rotary Switch (1) to save the setting.  
AROMA  
Press the Rotary Switch (1) until  
FILTER /
ߛ
 appears  
The illuminated ring (2) is active.  
Turn the Rotary Switch (1) until  
Turn the Rotary Switch (1) until TIME is displayed.  
EXIT appears  
TIME  
Now press the Rotary Switch (1) to start programming the time.  
--:--  
Turn the rotary Switch (1) to adjust the hours..  
12:--  
Press the Rotary Switch (1) to leave the programming mode.  
READY  
15.5 Programming the temperature  
READY  
Press the Rotary Switch (1) to confirm the hour settings and to  
Press the Rotary Switch (1) until  
activate the minutes.  
FILTER /
ߛ
 appears  
12:--  
Turn the Rotary Switch (1) to select the minutes.  
2:05  
Press the Rotary Switch (1) to save the setting.  
TIME  
The illuminated ring (2) is active.  
Turn the Rotary Switch (1) until Temperature is displayed.  
TEMPERATURE  
Press the Rotary Switch (1).  
HIGH  
Turn the Rotary Switch (1) until  
Turn the Rotary Switch (1) to change the temperature from  
HIGH to NORMAL (or vice versa).  
EXIT appears  
Press the Rotary Switch (1) to leave the programming mode.  
NORMAL  
Press the Rotary Switch (1) to save the setting.  
TEMPERATURE  
READY  
If the machine is disconnected from power supply, the time  
must be programmed again.  
Turn the Rotary Switch (1) until  
EXIT appears  
Press the Rotary Switch (1) to leave the programming mode.  
READY  
18  
15.7 Programming the automatic switch-on time  
15.8 Programming the automatic switch-off time  
You must programme the time (Chapter 15.6) if you want to  
use the automatic switch-on function (––:–– = inactive).  
You can programme your coffee machine such that it will  
switch off automatically after a certain time. You can pro-  
gramme the switch-off time in a range between 0.5 and 9  
hours, or select ––:–– (i.e. inactive).  
READY  
E
Press the Rotary Switch (1) until  
READY  
FILTER /
ߛ
 appears  
Press the Rotary Switch (1) until  
The illuminated ring (2) is active.  
FILTER /
ߛ
 appears  
Turn the Rotary Switch (1) until MACHINE ON is displayed.  
The illuminated ring (2) is active.  
MACHINE ON  
Turn the Rotary Switch (1) until OFF AFT. HR is displayed.  
Now press the Rotary Switch (1) to start programming the  
switch-on time.  
OFF AFT. HR  
Now press the Rotary Switch (1) to start programming the  
--:--  
Turn the Rotary Switch (1) to adjust the hours.  
12:--  
switch-off time. Switch-off time OFF AFT. HR  
5.0 HR  
Turn the Rotary Switch (1) to adjust the hours.  
1.0 HR  
Press the Rotary Switch (1) to save the setting.  
OFF AFT. HR  
Press the Rotary Switch (1) to confirm the hour settings and to  
activate the minutes.  
12:--  
Turn theRotary Switch (1) to select the minutes.  
12:05  
Press the Rotary Switch (1) to save the setting.  
MACHINE ON  
Turn the Rotary Switch (1) until  
EXIT appears  
Press the Rotary Switch (1) to leave the programming mode.  
READY  
Turn the Rotary Switch (1) until  
EXIT appears  
15.9 Cup counter  
Press the Rotary Switch (1) to leave the programming mode.  
This function is available with the following types of coffee:  
READY  
a) 1 LARGE CUP  
b)1 COFFEE  
c) 1 ESPRESSO  
d)1 powder coffee  
e) 2 COFFEE  
19  
READY  
LANGUAGE  
Press the Rotary Switch (1) until  
Now press the Rotary Switch (1) to start programming the item  
FILTER /
ߛ
 appears  
LANGUAGE.  
The illuminated ring (2) is active.  
Turn the Rotary Switch (1) until the required language is dis-  
played.  
Turn the Rotary Switch (1) until  
CUPS MADE appears  
For example  
Press the Rotary Switch (1) to save the setting.  
LANGUAGE  
ENGLISH  
Press the Rotary Switch (1)  
100  
Press one of the draw-off keys  
of individual cups made.  
/
/
to check the number  
(5).  
Turn the Rotary Switch (1) until  
EXIT appears  
E.g press draw-off key 1 cup of coffee  
20  
Press the Rotary Switch (1) to leave the programming mode.  
READY  
You can check the number of pre-ground cups of coffee by  
opening the filler funnel for pre-ground coffee (11).  
15.11 Programming Display 24H/AM/PM  
READY  
Touch one of the symbols  
made 2 cups of coffee.  
/
/
to check how often you  
Press the Rotary Switch (1) until  
FILTER /
ߛ
 appears  
To quit press the Rotary Switch (1).  
CUPS MADE  
The illuminated ring (2) is active.  
Turn the Rotary Switch (1) until  
Turn the Rotary Switch (1) until  
DISPLAY appears  
EXIT appears  
Press the Rotary Switch (1)  
Press the Rotary Switch (1) to leave the programming mode.  
READY  
ML/OZ appears  
Turn the Rotary Switch (1) until  
24H/AM PM appears  
15.10 Programming the language  
Press the Rotary Switch (1)  
e.g. 24H  
READY  
Select a setting of your choice.  
Press the Rotary Switch (1) until  
FILTER /
ߛ
 appears  
Press the Rotary Switch (1) to save the setting.  
The illuminated ring (2) is active.  
DISPLAY  
Turn the Rotary Switch (1) until LANGUAGE is displayed.  
20  
Turn the Rotary Switch (1) until  
Turn the Rotary Switch (1) until  
EXIT appears  
EXIT appears  
Press the Rotary Switch (1) to leave the programming mode.  
Press the Rotary Switch (1) to leave the programming mode.  
READY  
READYM  
E
15.12 Programming the display for ML/OZ  
16. Maintenance  
READY  
16.1 Filling in water  
Press the Rotary Switch (1) until  
FILL  
FILTER /
ߛ
 appears  
WATER  
The illuminated ring (2) is active.  
If this information is displayed, drawing off products is no  
longer possible. Refill water as described in Chapter 2.3.  
Turn the Rotary Switch (1) until  
DISPLAY appears  
Press the Rotary Switch (1)  
READY  
ML/OZ appears  
Press the Rotary Switch (1)  
e.g. ML  
The water tank should be rinsed daily and refilled with fresh  
water. Only fill in fresh, cold water. Never fill in milk,  
mineral water or other liquids.  
Select a setting of your choice.  
Press the Rotary Switch (1) to save the setting.  
16.2 Emptying the coffee grounds container  
DISPLAY  
EMPTY  
GROUNDS  
Turn the Rotary Switch (1) until  
EXIT appears  
Press the Rotary Switch (1) to leave the programming mode.  
If this message appears on the display, you can no longer  
draw off coffee. You must empty the coffee grounds con-  
tainer (18) first (Fig. 13).  
READY  
15.13 Exit programming mode  
Carefully take out the drip tray (20), it is filled with water.  
READY  
NO  
Press the Rotary Switch (1) until  
TRAY  
FILTER /
ߛ
 appears  
Insert the empty and clean trip tray (20) again.  
READY  
The illuminated ring (2) is active.  
21  
The red water level indicator appears when the drip tray (20)  
is full.  
16.6 Cleaning the IMPRESSA  
After 200 draw-off operations or after 80 rinsing operations, the  
IMPRESSA must be cleaned. A message appears on the display,  
telling you to start the cleaning programme. You can still draw off  
coffee or hot water/steam. However, we recommend that you  
should clean the machine (Chapter 17) within the next few days.  
16.3 Drip tray missing  
NO  
TRAY  
If this information is displayed, the drip tray (20) is not installed  
properly or was not installed at all.  
CLEAN MACHINE / MACHINE READY  
Insert the drip tray (20).  
16.7 IMPRESSA calcified  
READY  
During operation, the machine will calcify. The degree of scaling  
depends on the hardness of the water in your region. The machine  
will inform you when de-scaling is required. You can still draw off  
coffee or hot water/steam. However, we recommend that you  
should de-scale the machine (Chapter 18) within the next few days.  
16.4 Fill coffee beans  
FILL  
BEANS  
Refill beans as described in Chapter 2.4.  
MACHINE CALCIFIED / MACHINE READY  
The message REFILL BEANS will disappear after you draw  
off your next cup of coffee.  
16.8 General cleaning instructions  
Never use scratching objects, pan cleaners, cleaning sponges or  
caustic chemicals to clean the machine.  
We recommend that you clean the bean tank regularly before  
refilling beans, using a dry cloth. Before cleaning the tank,  
switch off the IMPRESSA.  
Wipe off the case on the inside and outside using a soft, moist  
cloth.  
Clean the replaceable hot water nozzle after each use.  
16.5 Replacing the filter  
To ensure that the Professional Cappuccino Frother functions  
perfectly, you should rinse it with water each time after pre-  
paring milk.  
After drawing off 50 litres, the filter cartridge will be used  
up. A message requesting you to replace the filter will appear  
on the display.  
To ensure that the Professional Cappuccino Frother functions  
perfectly, you should clean it daily if you have prepared milk.  
Refer to Chapter 5.2 «Replacing the filter».  
The water tank should be rinsed daily and refilled with fresh  
water.  
22  
If the water tank shows signs of scaling, remove the scaling  
using a commercial de-scaling agent. Take out the water  
tank (Fig. 4).  
Once started, the de-scaling operation must not be inter-  
rupted!  
After each cleaning operation the filler funnel for pre-ground  
coffee should be cleaned (11).  
Remove the CLARIS plus filter cartridge, if installed, before  
de-scaling the water tank.  
E
READY  
CLEAN  
16.9 Emptying the system  
Touch the  
symbol (7).  
EMPTY  
TRAY  
Empty the tray (20).  
Precondition: IMPRESSA switched off  
This operation is required to protect the IMPRESSA against  
frost damage during transports.  
NO  
TRAY  
Place a receptacle under the Professional Cappuccino Frother  
(15) (Fig. 10).  
Insert the tray (20) again.  
Turn the selector switch of the Professional Cappuccino Frother  
(15) to the steam position (Fig. 20).  
Remove the drip grate (19).  
Put a container (1 l, Fig. 11) under the adjustable coffee spout  
(17).  
OPEN TAP  
Press the Rotary Switch (1)  
PRESS  
EMPTYING  
CLOSE TAP  
MAINT.  
Touch the  
symbol (7).  
The IMPRESSA is switched off.  
CLEANING  
FILL  
17. Cleaning  
TABLET  
Your IMPRESSA features an integrated cleaning program. The  
cleaning operation will take some 15 min.  
Fill in the tablet (see Fig. 14)  
PRESS  
MAINT.  
Original JURA cleaning tablets which are specially designed  
for the cleaning program of your IMPRESSA are available at  
your authorized dealer. Please note that machine defects or  
residues in the water cannot be excluded if you use inappro-  
priate cleaning agents.  
Touch the  
symbol (7).  
CLEANING  
EMPTY  
TRAY  
23  
If the IMPRESSA needs de-scaling, the corresponding mes-  
sage is displayed.  
You can still draw off coffee or hot water/steam and start the  
de-scaling program later.  
Before starting the de-scaling program, the machine must be  
switched off. Once started, the de-scaling operation must not  
be interrupted.  
NO  
TRAY  
READY  
Wipe coffee powder tank with a dry cloth after the cleaning  
program has finished.  
The cleaning operation was completed successfully.  
When using the de-scaling agent, immediately remove any  
splashes or drips from sensitive surfaces, i.e. natural stone  
and wooden surfaces, or take appropriate precautions.  
17.1 Cleaning without display request  
Press the Rotary Switch (1) until  
FILTER /
ߛ
 appears.  
In any case wait until the de-scaling agent is used up and the  
tank is empty. Never refill de-scaling agent.  
Turn the Rotary Switch (1) until  
MAINTENANCE appears.  
Press the Rotary Switch (1) to confirm.  
MACHINE CALCIFIED / MACHINE READY  
RINSE  
Remove the Professional Cappuccino Frother (15).  
Turn the Rotary Switch (1) until  
Touch the  
symbol (7).  
EMPTY  
TRAY  
Empty the tray (20).  
CLEAN appears.  
Press the Rotary Switch (1) again to confirm.  
EMPTY TRAY  
The program “Clean” is now active. Now proceed as described  
NO  
TRAY  
in Chapter 17 from  
EMPTY TRAY onwards.  
Insert the tray (20) again.  
18. De-scaling  
AGENT  
IN TANK  
Your IMPRESSA features an integrated de-scaling program. The  
cleaning operation will take some 40 min.  
Completely dissolve the content of one blister (3 tablets) in a jug  
containing 0.5 litres of water, and fill the mixture in the water tank.  
Reinstall the water tank.  
Original JURA de-scaling tablets which are specially de-  
signed for the de-scaling program of your IMPRESSA are  
available at your authorized dealer. Please note that machine  
defects or residues in the water cannot be excluded if you  
use inappropriate de-scaling agents.  
OPEN TAP  
AGENT  
IN TANK  
24  
Place a receptacle under the hot water spout (Fig. 18).  
PRESS  
MAINT.  
Open the steam / hot water draw-off valve (14) (Fig. 12).  
Touch the  
symbol (7).  
DE-SCALING  
CLOSE TAP  
RINSING  
READY  
Close the steam / hot water draw-off tap (14).  
E
The de-scaling operation was completed successfully.  
DE-SCALING  
EMPTY  
TRAY  
18.1 Decalcifying without display request  
Empty the tray (20).  
Decalcifying without display request is only possible if the  
CLARIS plus filter is NOT programmed.  
NO  
TRAY  
Press the Rotary Switch (1) until  
Insert the tray (20) again.  
FILTER – appears.  
FILL  
Turn the Rotary Switch (1) until  
WATER  
MAINTENANCE appears.  
Rinse the water tank thoroughly and fill it with cold, fresh  
tap water. Install it again.  
Press the Rotary Switch (1) to confirm.  
RINSE  
Turn the Rotary Switch (1) until  
OPEN  
TAP  
DECALC. ON appears.  
Press the Rotary Switch (1) again to confirm.  
Open the steam / hot water draw-off tap (14) (Fig. 12).  
EMPTY TRAY  
DE-SCALING  
CLOSE TAP  
The program “De-scale” is now active. Now proceed as de-  
scribed in Chapter 18 from  
EMPTY TRAY onwards.  
After you have closed the steam / hot water draw off tap (14),  
the following message is displayed  
19. Disposal  
DE-SCALING  
Please dispose of old machines in an environmentally  
neutral way.  
EMPTY  
TRAY  
Old machines contain valuable materials capable of being  
recycled which should be salvaged for recycling. Please  
therefore dispose of old machines via suitable collection  
systems.  
Empty the tray (20).  
NO  
TRAY  
Insert the tray (20) again.  
25  
20. Tips for perfect coffee  
Height-adjustable coffee spout (17)  
You can adjust the height of the coffee spout to the size of your  
cups (Fig. 3)  
Grinding degree  
Refer to Chapter 2.5 «Adjusting the grinding gear».  
Preheating cups  
You can preheat the cups using hot water or steam. The smaller the  
coffee you want to draw off, the more important preheating is.  
Sugar and cream  
Stirring coffee/tea will result in heat being released. Adding  
refrigerated cream or milk will reduce the temperature of the coffee  
significantly.  
26  
21. Messages  
Cause  
Remedy  
FILL WATER  
Water tank is empty.  
Float defective  
Refill water  
E
Rinse or de-scale water tank  
Refill beans  
FILL BEANS  
Bean tank is empty.  
Although you have refilled beans, the  
message still appears.  
Draw off a cup of coffee. The message will  
disappear only after you have drawn off a cup  
of coffee  
EMPTY GROUNDS  
NO TRAY  
Coffee grounds container full  
Empty coffee grounds container  
Wait 10 sec. before reinstalling the tray  
Install tray properly  
Tray reinstalled too early after emptying  
Drip tray not installed properly or missing  
Cleaning required  
CLEAN MACHINE /  
MACHINE READY  
Start cleaning programme (Chapter 17)  
MACHINE CALCIFIED /  
MACHINE READY  
De-scaling required  
Filter used up  
Start de-scaling programme (Chapter 18)  
Replace filter (Chapter 5.2)  
CHANGE FILTER /  
MACHINE READY  
ERROR  
General fault  
- switch off  
- disconnect from mains supply  
- Connect IMPRESSA to power supply  
- Switch on IMPRESSA  
- Have IMPRESSA checked by JURA  
- Service  
27  
22. Problems  
Problem  
Cause  
Remedy  
Very loud noise coming from the  
grinding gear  
Foreign body in grinding gear  
Drawing off pre-ground coffee still possible  
Have IMPRESSA checked by JURA Service  
Too little foam when  
frothing the milk  
Professional Cappuccino Frother has  
become dirty  
Clean the Professional Cappuccino Frother  
(Chapter 13)  
Individual parts of the Professional  
Cappuccino Frother are incorrectly  
assembled  
Check correct assembly of the  
Professional Cappuccino Frother  
Coffee only drips  
from the coffee spout  
Grinding degree too fine  
Pre-ground coffee too fine  
Coarser grinding gear adjustment  
Use a coarser pre-ground coffee  
High-frequency, electromagnetic interference may influence the display. Drawing off coffee is possible at any time.  
If the messages or problems still persist, please contact your local authorized dealer or JURA Elektroapparate AG.  
28  
23. Legal information  
24. Technical data  
Voltage:  
These operating instructions contain all the information required  
for using, operating and maintaining the machine properly.  
230V AC  
1450 W  
10 A  
Power:  
Knowledge of and compliance with the specifications contained in  
these operating instructions is required for using the machine safely  
as well as for operational safety and safety during maintenance.  
These operating instructions cannot cover any conceivable appli-  
cation. The machine was designed for private household use.  
Additionally we point out that the content of these operating  
instructions does not form part of any previous or existing agree-  
ment, consent or al legal relationship nor does it constitute a  
change of such an agreement, consent or legal relationship. Any  
obligations to be fulfilled by JURA Elektroapparate AG are stipu-  
lated in the corresponding purchase contract, which also contains  
the full and solely applicable warranty stipulations. These con-  
tractual warranty stipulations are neither extended nor limited by  
the specifications contained in these operating instructions.  
Intensity of current:  
Safety check:  
E
Energy consumption Standby:  
approx. 3.5 Wh  
Energy consumption  
«Ready for draw-off» mode:  
approx. 11.5 Wh  
static, max. 15 bar  
1.9 litres  
Pump pressure:  
Water tank:  
Bean tank capacity:  
Coffee grounds container capacity :  
Length of cable:  
Weight:  
200gr  
max. 16 portions  
approx. 1.1 m  
9.1 kg  
The operating instructions contain information, protected by Copy-  
right. Photocopying or translations into other languages shall not be  
permissible without JURA Elektroapparate AG’s written approval.  
Size (WxHxD):  
28 x 34.5 x 44.5 cm  
The machine complies with the following EU directives:  
73/23/EWG dated 19/02/1973 "Low Voltage Directive" including  
Modification Directive 93/336/EWG  
89/336/EWG dated 03/05/1989 "EMC Directive" including  
Modification Directive 92/31/EWG  
29  

LG Electronics Wine II MMBB0386201 User Manual
LG Electronics KG920 User Manual
Kenwood KDC MP2032 User Manual
IBM 25CPC710 User Manual
HP Hewlett Packard Hewlett Packard Computer Accessories E200 User Manual
Hamilton Beach Coffeemaker 43603 User Manual
DeLonghi Fully Automatic Coffee Center Machine ESAM6700 User Manual
Belkin F4U008 User Manual
Addonics Technologies Computer Drive NAS4RM User Manual
321 Studios JBL Control 29AV User Manual