Janam Cell Phone XP20 User Manual

XP20 User Guide  
Version 5  
June, 2008  
XP20 User Manual  
CONTENTS  
Chapter 1: Introduction  
About the Janam XP20 Series  
Hardware features  
1-1  
1-1  
1-1  
1-2  
About Access and Palm  
Specifications  
Chapter 2: Get Started  
Unpack your Janam XP20  
Recommended host computer configuration/requirements  
Update your desktop software  
Hardware overview  
2-1  
2-1  
2-1  
2-2  
2-3  
2-3  
2-3  
2-3  
2-4  
2-4  
2-4  
2-4  
2-5  
2-6  
Attach the hand strap  
Install/charge the battery  
Remove the battery from spare charging well  
Turn on the XP20  
Reset the XP20  
Update your ROM  
Check your current ROM  
Download the correct BIN file  
Install the latest ROM  
Troubleshooting tips  
Chapter 3: Bar Code Scanning  
Demonstration and setup  
Enable the ScanWedge feature  
Unlock 2D scanning  
3-1  
3-1  
3-2  
*Chapter 4: Set Up Your Janam XP20  
Locate front panel controls  
Locate back panel components  
Tap versus click  
4-1  
4-1  
4-1  
4-2  
4-2  
4-3  
4-3  
4-4  
4-4  
4-5  
4-5  
4-5  
4-6  
4-6  
4-7  
4-8  
4-8  
4-8  
4-8  
4-8  
Calibrate the screen  
Use the multi-language feature  
Adjust the contrast of your screen  
Open applications  
Use the interface  
Use menus and menu commands  
Display tips  
Enter data  
Customize  
Set the date, time and time zone  
Format the date, time and numbers  
Set the auto-off delay time  
Set your handheld to stay on while in the cradle  
Set the sounds and volume  
Enable the alarm vibrate and alarm LED  
Turn beam receive on and off  
Palm Desktop software  
Chapter 5: Enter Data  
Use the onscreen keyboard  
Learn to write Graffiti 2 characters  
General guidelines for Graffiti 2 writing  
The Graffiti 2 alphabet  
5-1  
5-2  
5-2  
5-3  
5-3  
5-3  
5-4  
5-4  
5-5  
5-6  
5-6  
5-6  
Graffiti 2 tips  
Write punctuation marks and other special characters  
Use the Graffiti 2 tuner  
Use Graffiti 2 gestures  
Use Graffiti 2 shortcuts  
Use your computer keyboard  
Import data  
Use an external keyboard  
Janam Technologies LLC  
iii  
XP20 User Manual  
Chapter 6: Manage Applications  
Use the applications launcher  
Change the applications launcher display  
Set preferences for applications  
Install add-on applications  
6-1  
6-1  
6-2  
6-3  
6-3  
6-4  
6-4  
Remove applications  
Remove Palm Desktop software  
Assign security options  
Chapter 7: Work with Applications  
Use the date book  
7-1  
7-1  
Schedule events  
Set the alarm  
7-3  
Change the date book view  
Change the date book display  
Use the address book  
Use the to do list  
7-4  
7-5  
7-6  
7-8  
Use the calculator  
Use the memo pad  
7-10  
7-11  
Chapter 8: Use the Attention Manager  
Insistent alarms  
8-1  
8-2  
Subtle alarms  
Chapter 9: Use an Expansion Card  
Display contents of Janam XP20  
Launch an application  
9-1  
9-1  
9-1  
9-2  
9-2  
9-2  
9-3  
Display Janam XP20 application information  
Copy an application to your handheld or desktop  
Beam applications  
Delete applications  
Use card info  
Chapter 10: Perform Common Tasks  
Create records  
10-1  
10-1  
10-7  
10-8  
Edit records  
Choose fonts  
Get information on an application  
Chapter 11: Beam information  
Beam a business card  
Beam a record  
11-1  
11-1  
11-2  
11-2  
11-2  
Beam an application  
Receive beamed information  
Turn off beaming  
Chapter 12: Exchange and Update Data Using HotSync® Operations  
Perform the first local HotSync operation  
Create a user profile  
12-1  
12-1  
12-2  
12-3  
12-3  
12-4  
12-4  
12-5  
12-6  
Select HotSync setup options  
Customize HotSync application settings  
IR HotSync operations  
Conduct a HotSync operation via modem  
Conduct a HotSync operation via a network  
Conduct a HotSync operation via a wireless local area network (WLAN)  
Use file link  
Janam Technologies LLC  
iv  
XP20 User Manual  
Chapter 13: Regulatory and Maintenance  
Regulatory and safety approvals  
13-1  
13-1  
13-1  
13-2  
13-3  
13-3  
13-3  
13-3  
13-3  
13-4  
FCC and Canadian compliance  
XP Series batch terminal  
XP Series RF terminals with 802.11b and/or Bluetooth  
RF, regulatory and safety approvals  
Pacemakers, hearing aids and other electrically powered devices  
Care and cleaning of terminals  
For European Community users  
Waste electrical and electronic equipment information  
Battery warning  
Janam Technologies LLC  
v
XP20 User Manual  
1
Introduction  
The XP Series from Janam Technologies is the world’s first fully-featured, Palm OS®-based, rugged,  
barcode scanning mobile computer. Purpose-built for maximum performance, the XP Series delivers the  
benefits of Palm OS Garnet with the advanced technologies that industrial applications demand.  
About the Janam XP20 Series  
Janam designed the XP20 Series to execute mission-critical data collection tasks in the enterprise. Every  
element of the product’s form and function has a purpose. For example, the XP20 Series’ custom, bright-  
white, monochrome display was created because it offers the same 160x160 screen resolution as legacy  
Palm OS products, thereby facilitating application migration across hardware platforms. Yet the XP20  
Series also delivers significant improvements over legacy Palm OS products, each one aimed at extending  
the product’s reach into the enterprise. These include a numeric keypad, 2D barcode scanning, permanent  
memory backup of applications and data, keypad backlighting, user-accessible mini-SD slot, latest WLAN  
security, extra capacity battery and more.  
Hardware features  
Available with numeric or PDA-style keypad  
32MB SDRAM/64MB NAND  
NAND flash backup of OS, applications and user data  
User-accessible mini-SD slot  
Weighs less than 10 ounces  
1D and 2D barcode scanning capability  
Sealed to IP54 standards  
Rugged design: withstands multiple four-foot drops to concrete  
Enterprise-class WLAN with advanced WEP and WPA security protocols  
About Access and Palm  
In October 2006, Access announced that its wholly-owned subsidiary, PalmSource, Inc., changed its name  
to Access Systems Americas, Inc. Likewise, the Palm OS was renamed and is now known as Garnet OS.  
Garnet OS expands the solid foundation of Palm OS 5 by incorporating standard support for a broad range  
of screen resolutions and expanded support for wireless connections. It also includes enhanced multimedia  
capabilities, a suite of robust security options and support for a broad set of languages.  
Janam Technologies LLC  
1-1  
XP20 User Manual  
Specifications  
Janam Technologies LLC  
1-2  
XP20 User Manual  
2
Get Started  
Unpack your Janam XP20  
Make sure you have the following:  
Janam XP20 handheld computer  
Janam authorized battery  
Hand strap  
Charging accessory (ordered/packed separately) with one of the following kits:  
-
-
-
-
Single-slot cradle kit  
Four-slot cradle kit  
USB syncing/charging cable with AC adapter  
Serial syncing/charging cable with AC adapter  
Recommended host computer configuration/requirements  
Palm® Desktop version 4.1.4 or later  
PC running Windows XP (Home or Professional) Service Pack SP2 or Windows 98/2000 Pro/ME or NT  
4.0 Workstation, SP6 or higher  
512 MB RAM minimum (minimum 64MB recommended, required for Windows 2000)  
100 MB available hard disk space  
Video resolution 640x480 and 256 colors (800x600 recommended)  
One available USB port for syncronizing the XP20 using either a Janam cradle or Janam USB  
syncing/charging cable or serial syncing/charging cable.  
Update your desktop software  
there:  
b. In the Resource Center drop down menu, click on Updates & Downloads/XP Series  
c. Click on Janam Palm Desktop  
2. Fill out the brief form and click Next.  
3. The download screen will appear. Click on ‘Click here to download the .zip file’.  
4. Select a location to which to save the file.  
5. Create a new folder on the desktop.  
6. Open the zipped Janam_Palm_Desktop file and copy all files into the new folder you just created.  
7. Double-click on the Janam_Palm_Desktop41SP03ENG file and follow steps for installing.  
Janam Technologies LLC  
2-1  
XP20 User Manual  
Hardware overview  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
9.  
Power On/Off  
Indicator LED  
LCD  
Connector  
Scan Trigger  
Right Trigger  
Left Trigger  
Navigation  
Home  
10. Enter  
11. Brightness/Contrast  
12. Programmable  
13. Function  
14. Backspace  
15. Alpha/Numeric Shift  
16. Space  
17. Shift  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
Battery Door  
Battery Screw  
Reset Button  
Buzzer  
IrDA Window  
Stylus  
Stylus Slot  
Hand Strap connector  
1.  
2.  
3.  
Barcode Scan Window  
Power On/Off  
Syncing/Charging Connector  
Janam Technologies LLC  
2-2  
XP20 User Manual  
Attach the hand strap  
1. Push the thin, looped portion of the strap through the left- or right-side of hand strap connector on the  
back on the handheld (see item 8 in hardware overview).  
2. Thread the Velcro part of the strap through the loop at the bottom of the terminal and pull tight.  
Install the battery  
1. To access the battery compartment, turn the locking-screw counterclockwise to open the latch and  
remove battery cover.  
2. Position the battery lift strap against the back of battery well, ensuring tab extension is on left side.  
3. Place the Janam Lithium-ion rechargeable battery in and snap into place.  
4. Replace the battery cover by positioning the top prongs first and sliding into place. Tighten locking-  
screw by turning clockwise.  
To charge the battery:  
Important Note: The main battery charges the backup battery in the XP20. Once the main battery is  
fully charged, do not remove it from the unit for 24 hours. If removed during this period, the device  
cannot maintain any user data if the battery is removed.  
To charge the battery using the USB syncing/charging cable or serial charging cable:  
1. Connect the power supply to the USB syncing/charging cable or serial/syncing charging cable.  
2. Connect snap-on end of USB syncing/charging cable or serial/syncing charging cable to bottom of  
XP20 making sure the word TOP on the connector faces front.  
3. Insert country-specific AC plug and plug in the power supply.  
To charge the battery using the single-slot or four-slot cradle:  
1. Connect the power supply to the cradle.  
2. Connect the line cord to the appropriate power supply.  
3. Plug in the power supply.  
4. Insert the XP20 into the cradle. Important: Proper insertion is required to ensure connection. Be  
sure to insert the device as follows:  
Place the XP20 in cradle well (seating the device without trying to join connectors).  
Tilt-rotate the XP20 forward (bringing the top end of the unit forward) as you apply downward  
pressure to fully insert in cradle well, joining connectors.  
5. The LED will illuminate to confirm connection (orange indicates charging, green indicates fully charged  
and red indicates fault).  
6. The battery is fully charged in approximately two hours.  
Remove the battery from spare battery charging well  
Do not force-pull the battery from charging well. Follow these instructions to remove the battery:  
1. Position hand with index finger at position A and thumb at position B (reverse for left-hand).  
2. While gently holding down with thumb, slip index finger down against the battery so that you feel the  
edge where the battery meets the cradle.  
3. Press down and forward with index finger to lift battery edge.  
Turn on the XP20  
The first time the device is turned on, a Welcome Wtility appears. To set up the device, follow the on-screen  
instructions, which include locating and using the stylus, screen calibration and date/time settings. To access  
the welcome utility at a later time, go to the main or applications menu (home) and select the welcome  
icon.  
Note: If your XP20 came pre-loaded with a custom software application, the Welcome wtility may not  
appear. If this happens, follow the on-screen instructions.  
Janam Technologies LLC  
2-3  
XP20 User Manual  
Reset the XP20  
To soft reset:  
In most situations, a soft reset will not impact data that has been stored on the device. However, any data  
that has not been saved will be lost during a soft reset. To perform a soft reset, do the following:  
1. Remove the battery door from the back of the unit.  
2. Using the stylus, press the reset button (one time).  
3. Replace the battery door.  
To hard reset:  
A hard reset returns the XP20 to factory settings, removing ALL applications and data from the device  
(including the Hotsync ID name). Be sure that all data is backed up before performing a hard reset.  
To perform a hard reset, do the following:  
1. Remove the battery door from the back of the unit.  
2. While holding down the on/off switch, use the stylus to press the reset button (once). Continue to  
hold on/off switch at the end of the line.  
3. After the reset has occurred and the Palm logo appears on the screen, release the on/off switch, and  
the following message will appear:  
Erase all data? To answer YES*: use “up” or down” arrows, or NO: use any other button.  
*Note: If you select yes, all data and installed applications will be erased but factory settings remain.  
IMPORTANT NOTE about battery door: XP20 mobile computers feature a battery door removal  
detection switch. This is designed to protect against data loss if the battery is removed during data  
collection or processing. The system will not fully operate when the battery cover is removed. As a result  
of this feature, XP20 devices automatically create a safe state until the battery cover is secured, meaning  
a device will power-down until the battery door is closed. It will then recall and resume from the user’s  
most recent screen when the battery door is fully in place.  
Power-down: Upon performing a reset, you may find that the device automatically powers-down shortly  
after the reset begins to take. This is a normal function of the battery door removal detection switch; the  
reset will hold. Simply secure the battery door and the XP20 device will resume activity at the last screen.  
While there is no technical reason to rush to secure the battery door, you may avoid the power-down  
activity by quickly securing the battery door.  
Update your ROM  
NOTE: ALL applications and data will be DELETED, so make sure you are properly backed up before  
starting this process.  
A. Check your current ROM version:  
1. Select the memo pad application on the XP20.  
2. Select new.  
3. Write the symbols for shortcut dot 9 (shown at right) in the numeric section of the  
graffiti pad.  
4. Your unit’s ROM build date and time will be displayed. Write this down for reference.  
B. Download the correct BIN file:  
1. Download the appropriate ROM by logging in to Janam PartnerZone. (You will need a login name  
and password.)  
2. Accept the terms and conditions, and go to PartnerZone.  
3. Locate the BIN file for the XP20.  
4. Click the arrow at right to begin download. Remember to store the BIN file in an easily accessible  
location, like your desktop. You will need this file for the next section.  
Janam Technologies LLC  
2-4  
XP20 User Manual  
C. USB Updater Process  
1. First check that you have the necessary files to perform the update to your device. You will need:  
b. USB Updater Application (available at Janam’s Partnerzone)  
c. Correct XP20 or XP30 ROM Image (available at Janam’s Partnerzone)  
2. Open the Palm Quick Install application on your desktop from the Palm Desktop Start Menu.  
3. On the Palm Quick Install window that appears, click the Add button, then browse to and select the USB  
Updater Application. You will see an onscreen message: ‘USB Application will be installed during next  
Hotsync Operation’. Click OK.  
4. Close the Palm Quick Install window on your desktop by clicking on the ‘X’ box in the top right corner.  
5. Connect your XP Series device and synch the device (this can be done with the USB/Serial cable or a  
cradle kit).  
6. A Select a User window will open on your desktop. Select OK.  
7. A Device Reset Required message will open on the handheld. Tap Reset.  
D. ROM Update Procedure  
1. On the XP device, tap the Home icon.  
2. Scroll down to USB Updater Application and tap the icon.  
3. A window displaying ‘Do not interrupt the ROM update process until it is complete.’ will appear. Tap the  
window at the bottom of that screen that says ‘Tap here to start ROM update procedure.’.  
4. On the desktop a Removable Drive window will appear. Drag and drop the appropriate ROM file to that  
window to copy the file. The file may take a moment to copy.  
***CAUTION*** Make certain that you use the correct “bin file” for your device. If you use  
the BIN file for an XP20 on an XP30, or vice-versa, the unit will fail to boot-up. If you have any  
questions about this, please contact [email protected].  
5. When the file is finished copying, eject the removable drive. To do this, go to My Computer and right  
click on the drive to select Eject.  
6. A ROM Update Complete message will appear on the handheld, instructing you to perform a hard reset.  
It is now safe to remove/disconnect the handheld to perform the hard reset.  
E. Perform a Hard Reset  
1. Remove the battery cover.  
2. Press and hold the power button while you press and release the reset button. Hold the power button  
until the Palm logo appears, then release the power button.  
3. A message will appear stating that all data will be erased. Enter Yes.  
4. Replace the battery cover.  
5. Check the ROM version to make sure the new ROM was installed properly. To do this:  
a. Select the Memo Pad application on a Janam XP unit.  
b. Select New.  
c. Write “shortcut dot 9” (as shown below) in the numeric section of the Graffiti pad. Your unit’s ROM  
build date and time will be displayed.  
Janam Technologies LLC  
2-5  
XP20 User Manual  
To troubleshoot during ROM update:  
The following helps resolve any issues that might be encountered during the ROM update process.  
Description  
Resolution  
Explanation  
The scanner turns on  
when pressing the right  
scanner button.  
Return to the main application  
display of the device, remove the cause the device to focus on the  
battery and restart the ROM  
installation process.  
In some situations, the application may  
scanner. It is best to perform the  
upgrade process from the main  
application display.  
The front LED is staying  
on and the device is non- device.  
functional.  
Perform a soft reset of the  
It is possible that the ROM update  
process was unexpectedly terminated  
and the device needs a reboot.  
Windows is not  
recognizing the device.  
Disconnect the sync cable from  
the device and perform a soft  
reset. With the cable already  
Sometimes, Windows attempts to find  
the device and the appropriate driver,  
but it takes too long, so the process  
plugged into the host computer, aborts. Typically, on the second (or  
reconnect the XP20.  
Perform reset first.  
sometimes third) attempt, Windows will  
properly discover the device.  
Windows finds the device, Same as previous resolution.  
but the My Computer  
screen is not displaying  
The speed of the host computer and the  
version of Windows XP being used may  
impact the process.  
an associated removable  
drive.  
The letters USB are not  
displaying on the screen  
of the device.  
Hard reset the device, and restart This can happen when the process is  
the ROM update process.  
aborted and the updated ROM file has  
been placed on the removable drive. In  
some situations, the letters USB may no  
longer appear, and you will need to  
presume the update will take place.  
That means, the device has a boot-  
program that can still connect with  
Windows, but the display is no longer  
functional.  
Janam Technologies LLC  
2-6  
XP20 User Manual  
3
Barcode Scanning  
As a drop-in replacement for existing rugged Palm OS® mobile computers, the XP20 provides an easy  
migration path. As a result, minimal application code changes are required for barcode scanning  
applications.  
Barcode scanning demonstration and setup  
IMPORTANT: When you enter the barcode scanner demo application (the icon labeled JANAM), the  
program will turn the scanner on. The scanner will remain on while the demo is running, even if the unit  
is turned off. To conserve your battery, exit from the application.  
To run the demo:  
1. Tap the home button, and tap the Janam icon.  
2. Tap the barcode scanner demo (application menu) in the upper left corner of the screen to display  
the setup options.  
3. Three menus will appear (setup, OCR, options).  
4. After starting the demo application, a variety of options become available:  
Beep sound: you can enable or disable the sound whenever a successful barcode or optional  
character recognition (OCR) occurs.  
-
Note: you can control the volume of the sound from the prefs application located in home or  
main menu. In the upper right corner’s drop-down menu, click and select general to change  
the volume.  
Light mode: This menu presents several options. You can turn off the illumination and aimer;  
turn the aimer only on; turn on the illumination only; or turn on both aimer and illumination.  
Bar type: Display only – shows the symbology of the barcode scanned.  
Bar data: Display only – shows the result of the decoded object.  
5. Tap the hardware test option to review all the functions of the scanner and determine if everything  
is working properly. Select each item individually (aimer on, illumation on, vibrator on, red LED on,  
green LED on, beeper on, keypad backlight on) to verify that all hardware is working properly.  
6. Tap OK to return to the main demo.  
7. Tap options > symbology config.  
8. Tap enable all to let the scanner decide the best method of decoding the barcode.  
9. Tap OK to return to the main demonstration screen.  
10. Point the scanner at a barcode, and press any of the three barcode scan buttons on the XP20  
(left/right trigger or center scan button). The results will display after you achieve a successful scan.  
Enable the ScanWedge feature  
When the ScanWedge feature is enabled, data can be entered into the specified application by opening the  
application on the handheld and scanning a barcode.  
1. Go to menu/home > preferences > ScanWedge.  
2. Select enable from the ScanWedge menu.  
3. Tap the Scanwedge tab (top  
left of screen), and open  
symbology config. You can  
then select enable all to  
enable every type of barcode  
or manually select the barcode  
symbologies you need.  
4. Press OK.  
Janam Technologies LLC  
3-1  
XP20 User Manual  
You may now go to the main menu and run any application (e.g., note pad). When a barcode is scanned,  
its data will be entered wherever the cursor is placed.  
Note: The ScanWedge function will be disabled if manual scanning is initiated either by a command API or  
by using the Janam Barcode Test program.  
Unlock 2D scanning  
All of Janam’s mobile computers can be upgraded in the field to read both 1D and 2D barcodes with a  
simple firmware upgrade (Part Number 2D-XP-1). With each upgrade, a key code is provided that unlocks  
2D scanning capability on the device. To purchase an upgrade for your XP20, contact your reseller or  
distributor or Janam customer service.  
You will need to provide the product imager ID number so the appropriate five-digit key code sequence  
can be assigned. To access the imager ID number, follow these steps:  
1. From the home screen, tap the menu button or date on the  
upper left corner of the screen and select info.  
2. The info screen will appear. Press the version button.  
3. Write down the ID number (e.g., 006206A090E-J). When  
purchasing the upgrade, provide this 12-digit serial number.  
The five-digit key code for enabling 2D scanning on the device  
will be sent to you.  
After receiving your five-digit key code, follow these steps to enable 2D scanning.  
1. Go to the preferences screen and select settings.  
2. Tap the unlock 2D scan button.  
3. Enter your five-digit key code, and a successful unlock notification will appear.  
4. Select the bar code scanner demo tab at the top of the screen.  
5. Tap the menu button to open symbology config. You can then select enable all to enable every type  
of barcode or manually select the barcodes of your choice.  
6. Press OK.  
Note: The unlock code will be maintained in the unit’s system after a soft reset, but it will need to be re-  
entered after a hard reset. Remember to keep a record of your five-digit key code.  
Janam Technologies LLC  
3-2  
XP20 User Manual  
4
Set up your Janam XP20  
Locate front panel controls  
Contrast control button. Displays the onscreen contrast control. You can adjust the screen for the  
clearest screen display according to the lighting conditions or temperature of the environment where  
you use your organizer.  
Power button. Pressing the power button turns the handheld computer on (if it is off) and returns to  
the last screen that was displayed. Press the power button to turn the handheld computer off.  
Use the backlight to illuminate the screen in low-light conditions. Hold down the power button for  
about two seconds to turn the backlight on and off.  
Janam XP20 screen. Displays the applications and data stored in your handheld computer. It is touch-  
sensitive and responds to the stylus.  
Text input area. Write letters and numbers in this area using the Graffiti® 2 alphabet.  
Scroll button. Displays text and other information that extends beyond the area of the handheld  
computer screen. Press the lower half of the scroll button to scroll down and view information below  
the viewing area. Press the upper half to view information above the viewing area.  
Application buttons. Activates the individual handheld computer applications that correspond to the  
icons marked on the buttons: date book, address book, to do list and memo pad.  
Locate back panel components  
Stylus channel. Holds the stylus. To use the stylus, remove it from the channel and hold it as you  
would a pen or pencil.  
IR port. Uses infrared technology to transmit and receive data to and from other handheld  
computers, and to perform HotSync operations.  
Reset button (located under battery cover). Under normal use, you should not have to use the  
reset button.  
USB/serial connector. Connects your handheld computer to a PC via a USB or serial cable or by  
inserting XP20 into a Janam cradle.  
Tap versus click  
Tapping is the basic action used to execute tasks, so use the stylus to tap elements on your handheld  
computer’s touch-sensitive screen. You can drag the stylus to select text, or use the stylus to drag the  
slider of any scroll bar.  
IMPORTANT: Always use the point of the stylus for tapping or making strokes on the handheld computer  
screen. Do not use a pen, pencil or any other sharp object to write on the screen.  
Janam Technologies LLC  
4-1  
XP20 User Manual  
Calibrate the screen  
The first time you start the Janam XP20 handheld computer, setup instructions appear onscreen. These  
instructions include a calibration screen, or digitizer. Calibration aligns the internal circuitry of the  
handheld computer with its touch-sensitive screen so your handheld  
computer can detect the task you want to perform when you tap an  
element on the screen.  
To calibrate your screen:  
1. Tap the applications icon > prefs.  
2. Tap digitizer in the pick list on the upper right corner of the screen.  
3. Follow the on-screen instructions, tapping the screen where  
indicated.  
Use the multi-language feature  
WARNING: If the language you choose on your handheld computer does not match the language you  
chose when you installed your Palm Desktop software, you may experience data loss. If you are unsure,  
reinstall the software.  
WARNING: If you change to a language other than English, you will have to perform a hard reset, which  
will erase all data on your handheld computer. If you have data you need to save, perform a HotSync  
operation before you change languages.  
If your handheld computer has the multi-language feature, the available languages will be displayed in the  
digitizer screen.  
Once you have calibrated the digitizer, you will be prompted to pick a language. Follow these steps:  
1. Tap your language choice > OK.  
A confirmation screen reminds you that this setting must match the  
language setting on your Palm Desktop software.  
2. Perform a hard reset of your device IF you select yes to change to a language other than English.  
NOTE: You will see similar information when you select digitizer in the preferences menu, or launch the  
welcome application.  
Janam Technologies LLC  
4-2  
XP20 User Manual  
3. After your handheld computer is reset, the country you have chosen  
will appear in set date and time screen. Press next to continue.  
4. Tapping next displays the basic skills tutorial in the language you  
have chosen in the setup complete screen.  
Adjust the contrast of your screen  
You can adjust the contrast of your screen to make it easy to see in a variety of lighting conditions.  
To adjust the contrast of your handheld computer screen:  
1. Turn on your device.  
2. For PDA keypad, press the contrast button. For Numeric keypad,  
press and hold the yellow function key and press the left/right  
navigation key. The adjust contrast slider appears.  
3. Do one of the following:  
Drag the slider to adjust the contrast.  
Tap to the right or left of the slider to adjust the contrast in small increments.  
Press and hold the up or down arrows to adjust the contrast in small or large increments,  
respectively.  
Open applications  
You can use the applications launcher (the home button on the front of your device) to open any  
application installed on your handheld computer. You can also open the four main applications—date book,  
address book, to do list and memo pad—with the hardware application buttons on the front panel of your  
handheld computer.  
TIP: When you press a hardware application button on the front panel of your device, the selected  
application immediately appears, even if the device was turned off.  
In addition to providing a way for you to open applications, the applications launcher displays the current  
time, battery level and application category.  
To open an application:  
1. Tap the applications icon.  
2. Tap the icon of the application you want to open. If you have many applications installed on your  
Janam XP20 handheld computer, tap the scroll bar to see all the available applications.  
TIP: You can find an application quickly by writing the Graffiti 2 character for the first letter of its name.  
The application launcher scrolls to the first application with a name that begins with that letter.  
Janam Technologies LLC  
4-3  
XP20 User Manual  
Use the interface  
Your handheld computer includes the following interface elements:  
The menu bar contains a set of menu commands specific to the application. Not all applications have  
a menu bar.  
The command bar lets you tap icons or write a ShortCut stroke to initiate a command instead of  
tapping a command in the menu bar. The icons displayed in the command bar vary within each  
application.  
Command buttons initiate a command when tapped. Command buttons appear in the dialog and at  
the bottom of application screens.  
Icons open applications and menus and find text anywhere in your data.  
The abc dot in the input area activates the alphabetic keyboard when tapped; note that the cursor  
must be in an input field for this option to work.  
The 123 dot in the input area displays the numeric keyboard when tapped; note that the cursor must  
be in an input field for this option to work.  
Check boxes indicate the state of the corresponding option. A check mark in a check box means the  
option is active. If a check box is empty, tapping it inserts a check mark. If a check box is checked,  
tapping it removes the check mark.  
Pick lists display a list of choices. Tap the black triangle next to the pick list name to display a list of  
choices, and then tap an item in the list to select it.  
The scroll bar moves through long notes or memos. Tap and hold down the scroll bar slider to scroll  
through pages; tap the slider arrow at either end to move one line at a time. To scroll to the previous  
page, tap the scroll bar just above the slider; to scroll to the next page, tap the scroll bar just below  
the slider. You can also scroll to the previous and next pages by pressing the upper and lower portions  
of the scroll button on the front panel of the handheld computer.  
Next/previous arrows display the previous and next page of information.  
Text areas and screens allow you to enter information.  
Use menus and menu commands  
Menus on your handheld computer are easy to use, and work the same way in all applications. Menu bars  
and manual commands differ based on the application and the area of the application in which you’re  
working. For example, memo list screen and the memo screen display different menus.  
Most menu commands have an equivalent Graffiti 2 command stroke, which is similar to keyboard  
shortcuts used to execute commands on computers. To use Graffiti 2 menu commands, menus must be  
closed.  
To display a menu bar and choose a command, do one of the following:  
Open an application (such as the date book); then tap the menu icon. Select the desired  
command from the menu.  
Tap the inverted tab at the top of any application’s screen (the calculator does not have an inverted  
tab); then tap the desired command.  
In the text input area of your device’s screen, drag a diagonal line from the lower left to upper right  
to display the command toolbar. The command bar is displayed for approximately four seconds.  
Janam Technologies LLC  
4-4  
XP20 User Manual  
Tap an icon that represents the command you want, or enter the shortcut for the command in the text  
input area below the command toolbar. For example, to choose select all in the edit menu, draw the  
Graffiti 2 command stroke in the text area to display the command toolbar; then draw the letter S. Note  
that if you wait more than three seconds to draw the shortcut letter, you’ll have to redraw the Graffiti 2  
command stroke to redisplay the command toolbar.  
Display tips  
Many of the dialogs that appear on your handheld computer contain a  
tips icon in the upper right corner. Tips anticipate questions you may  
have and provide shortcuts for using the dialog or other useful  
information.  
1. Tap the tips icon (the lowercase I in the upper right corner of the  
dialog).  
2. Tap done after reading the tip.  
Enter data  
You can enter data into your Janam XP20 in five ways:  
Using the onscreen keyboard  
Using Graffiti 2  
Using an external keyboard  
Entering or importing data in (device desktop software), and then synchronizing with your  
handheld computer  
Scanning a barcode  
Customize  
To select preferences:  
You set preferences to customize your device. To select the preferences screen, do the following:  
1. Tap the applications launcher icon.  
2. Select all or system from the pick list in the upper right corner of the screen.  
3. Tap prefs.  
To change owner preferences on your handheld computer:  
1. Tap owner from the pick list in the upper right corner from the preferences screen.  
2. Enter the text you want to associate with your handheld computer on the owner preferences screen.  
If you enter more text than can fit on one screen, a scroll bar appears at the right side of the screen.  
If you assigned a password to your device using the security application, you must unlock the owner  
preferences screen to change the information on it.  
To unlock the owner preferences screen:  
1. Display the owner preferences screen.  
2. Tap unlock.  
3. Enter your current password > OK.  
4. Edit the owner preferences text as desired.  
Janam Technologies LLC  
4-5  
XP20 User Manual  
Set the date, time and time zone  
The date and time screen lets you set the date, time, time zone and daylight savings time for your device.  
To set the date:  
1. Tap the applications launcher > prefs.  
2. Tap date and time from the pick list in the upper right corner.  
3. Tap the set date box on the date and time screen, then tap the arrows at the top of the set date  
screen to select the current year.  
4. Tap the month > current date > year. The screen closes and the date you selected is displayed.  
To set the time:  
1. Tap the applications launcher icon; then tap the prefs icon.  
2. Tap date and time from the pick list in the upper right corner.  
3. Tap the set time box on the date and time screen, then tap up or down arrow to change the hour.  
4. Tap each minute number, and then tap an arrow to change the number.  
5. If available, tap AM or PM.  
6. Tap OK to set the new time.  
To set the time zone:  
1. Tap the applications launcher > prefs.  
2. Tap date and time from the pick list in the upper right corner.  
3. Tap the set time zone box on the preferences screen.  
4. Use the up and down arrows to scroll to your country and time zone.  
Make sure your time zone is highlighted.  
5. Tap OK.  
TIP: Choose the time zone from the list that corresponds to where you are. When you travel, use this  
dialog to change time zones. Do not use the time zone dialog to switch between daylight savings time and  
standard time. Use the daylight savings pick list.  
To set daylight savings time:  
1. Tap the applications launcher.  
2. Select date and time from the pick list in the upper right corner of the screen.  
3. Tap on the daylight saving pick list to toggle this feature on or off.  
Format the date, time and numbers  
When selecting a country and time, date and number formats, keep the following in mind:  
When you select a country, the time, date, and number formats are adjusted, as well as the week’s  
starting day.  
The time setting defines the format for the time of day.  
Janam Technologies LLC  
4-6  
XP20 User Manual  
To choose a country default:  
1. Tap the applications launcher > prefs.  
2. Tap formats in the pick list in the upper right corner.  
3. Tap a country name from the preset to pick list.  
To change the formatting of the time, date, week start and numbers:  
NOTE: This setting controls the day, week, month and agenda views in date book and all other aspects of  
your handheld computer that display a calendar.  
1. Tap applications > prefs.  
2. Tap formats from the pick list in the upper right corner  
3. Tap the time pick list and select a format, where H is hour and M is minute in the formats  
preferences screen.  
4. Tap the date pick list and select a format, where D is day, M is month, and Y is year.  
5. Tap the week starts pick list, and select Sunday or Monday.  
6. Tap the numbers pick list, and select formats for the decimal point and thousands separator.  
Set the auto-off delay time  
Using the auto shut-off interval, your handheld computer automatically turns off the power and backlight  
after a period of inactivity to conserve battery power. If you find that your handheld computer shuts itself  
off before you finish reviewing the information on the screen, you can increase the automatic shut-off  
setting.  
1. Tap applications > prefs.  
2. Tap general from the pick list in the upper right corner.  
3. Change the auto-shutoff time by tapping the auto-off after in the general preferences screen pick  
list. Select an option—30 seconds, 1 minute, 2 minutes, or 3 minutes.  
Janam Technologies LLC  
4-7  
XP20 User Manual  
Set your handheld to stay on while in the cradle  
1. Tap applications > prefs.  
2. Tap general from the pick list in the upper right corner.  
3. Tap the stay on in cradle check box to allow your handheld computer to stay on while in the cradle.  
Unchecking the box causes your handheld computer to shut off after the auto shutoff time interval  
that is set in your general preferences.  
Set the sounds and volumes  
You can control the sound for system alerts, alarms and games using the general preferences screen. You  
can also turn the alarm vibrate and alarm LED on and off.  
1. Tap applications > prefs.  
2. Tap general from the pick list in the upper right corner.  
3. Tap the pick lists; system sound, alarm or game sound, and then select the sound level—off, low,  
medium or high to set sounds and volumes.  
Turning off the system sound also turns off the chime tones used during HotSync operations.  
Enable the alarm vibrate and alarm LED  
1. Tap applications > prefs.  
2. Tap general from the pick list in the upper right corner.  
3. Tap the alarm vibrate pick list and select on or off.  
4. Tap the alarm LED pick list and select on or off.  
When you enable the alarm vibrate and alarm LED settings, your handheld computer will vibrate and the  
LED blinks to notify you of alarms.  
Turn beam receive on and off  
Beaming is discussed in another chapter.  
Palm Desktop software  
Palm Desktop includes the same main applications as your Janam XP20 handheld computer: address  
book, date book, to do list, memo pad and desktop e-mail connectivity. You can use the HotSync feature  
of this software to back up and exchange data between your handheld computer and your computer.  
Using the Palm Desktop, you can do the following:  
Work with your Janam XP20 handheld computer applications on your computer.  
Back up or synchronize the data stored on your handheld computer with HotSync technology.  
Import and export data.  
Print your date book, address book, to do list and memo pad information.  
Janam Technologies LLC  
4-8  
XP20 User Manual  
5
Enter Data  
You can enter data into your Janam XP20 handheld computer by using the onscreen keyboard, writing  
with the stylus in the text input area, using an external keyboard or by importing data from another  
application.  
Use the onscreen keyboard  
You can open the onscreen keyboard when you need to enter text or numbers.  
To use the onscreen keyboard:  
1. Open any application (such as the address book).  
2. Tap any record or new.  
3. Choose one of the following to display the alphabetic or numeric keyboard:  
Tap abc on the front of your XP20 to display the alphabetic keyboard.  
Tap 123 on the front of your XP20 to display the numeric keyboard.  
Write lowercase letters here  
Write numbers here  
Tap abc for alphabet  
Tap 123 for numeric keypad  
Write uppercase letters across the division marks  
4. Tap abc or 123 on the front of your handheld computer, and then tap int’l at the bottom of the  
keyboard display to display the international keyboard.  
Alpha  
Numeric  
International  
5. Tap the desired characters or numbers.  
6. Tap done to enter the text or numbers.  
Janam Technologies LLC  
5-1  
XP20 User Manual  
Learn to write Graffiti 2 characters  
The Graffiti 2 demo shows how to use the handwriting software. The first time you  
turn on your XP20, or perform a hard reset, the welcome application will  
automatically guide you through the setup process. When you complete setup,  
you will be invited to learn how to use your handwriting software.  
After this process, the Graffiti 2 demo icon will appear with your other applications. Tap on this  
icon to view the demo at any time.  
TIP: When you reach the stroke lookup screen of the demo, use the pick list to  
view the wide variety of characters that you can make.  
General guidelines for Graffiti 2 writing  
Follow these guidelines to learn and use Graffiti 2 writing strokes successfully:  
To achieve 100% accuracy, practice drawing characters exactly as they  
appear in the tables later in this chapter.  
The heavy dot on each shape indicates where to start the stroke.  
Graffiti 2 includes symbols made with a single stroke and symbols made with multiple strokes.  
-
For multi-stroke characters, a temporary character is displayed after the first stroke, to show that  
the stroke was recognized. For example, after the first vertical stroke of “t”, a temporary “l” is  
shown. There is a limited time window during which the second stroke must be drawn. Otherwise  
the temporary stroke is recorded.  
To write Graffiti 2 letters:  
1. Tap the screen where you want to write text.  
NOTE: A blinking cursor must appear onscreen above the Graffiti 2 writing area before you can  
begin writing text.  
2. Use the tables to find the stroke shape for the letter you want to write.  
For example, the stroke shown at right creates the letter n. You use the same  
shape to create both the lowercase letter and the uppercase letter.  
3. Position the stylus in the appropriate place of the text input area.  
4. Start your stroke at the heavy dot, and draw the stroke shape as it appears in the  
tables.  
5. Lift the stylus from the screen at the end of the stroke shape.  
6. The letter displays at the insertion point onscreen. Lift the stylus from the screen to begin the next  
stroke.  
Janam Technologies LLC  
5-2  
XP20 User Manual  
The Graffiti 2 alphabet  
Graffiti 2 tips  
ƒ For greater accuracy, draw letters  
with large strokes; strokes that  
nearly fill the text input area is  
easily interpreted.  
Draw Graffiti 2 letters according to the following alphabet.  
ƒ To delete characters, set the  
insertion point to the right of the  
character you want to delete, and  
draw the backspace stroke (a line  
from right to left) in the text input  
area.  
ƒ Write at natural speed. Writing  
too slowly can produce errors.  
ƒ Do not write at a slant. Keep  
vertical strokes parallel to the  
sides of the text input area.  
ƒ Letters and numbers can be  
written using two different  
strokes.  
ƒ Press firmly.  
Write punctuation marks and other special characters  
Using Graffiti 2 writing, you can create any punctuation symbol and special character available from a  
standard keyboard.  
Period and comma punctuation marks can be written on either side of the text input area (the letter or  
number side).  
Other common punctuation marks can be written on one side of the text input area according to the  
chart below (in general, the more frequently used punctuation is on the left side).  
Note: punctuation characters can also be entered anywhere on the text input area if you first use the  
shift character. This requires an additional shift stroke.  
To write letters with accent marks:  
First write the letter stroke on the left side (in center for uppercase) of the input area.  
Then quickly write the accent stroke on the right side of the input area.  
TIP: To write uppercase accented characters, write the letter across the division mark, just as you would  
do with an ordinary letter.  
Janam Technologies LLC  
5-3  
XP20 User Manual  
To write symbols and other special characters:  
Make a vertical stroke from the bottom to the top in the text input area  
The shift indicator arrow appears in the lower right corner of the screen.  
While the arrow is visible, you can make the Symbols and other special characters shown below.  
When the arrow goes away, the punctuation mark appears.  
TIP: Using an additional shift stroke to finish writing the character (as shown in the demo) is optional but  
will make the character appear more quickly.  
TIP: Samples of the character strokes are available in the Graffiti 2 help file. To view the help file, use the  
full-screen pen stroke, dragging the stylus from the text input area to the top of the screen.  
Use the Graffiti 2 tuner  
The Graffiti 2 tuner provides alternate strokes for making the T, P, Y, and $ characters. For example, you  
may want to form the letter “T” by using strokes similar to a space and an “L.” But if this technique is  
difficult to control, you can turn off this option.  
To use the tuner:  
1. Tap the applications icon.  
2. Tap system from the pick list in the upper right corner of the screen.  
3. Tap on the prefs icon.  
4. Select Graffiti 2 tuner from the pick list.  
5. Tap on one of the letters available for you to tune.  
6. On the next screen, tap the box to place a check for the characters you wish  
to change.  
7. Tap done.  
Use Graffiti 2 gestures  
Gestures are editing commands, such as cut, paste and undo. The ShortCut  
command is explained further in the next section. To use gestures, draw the  
strokes on the right.  
Janam Technologies LLC  
5-4  
XP20 User Manual  
Use Graffiti 2 ShortCuts  
You can create ShortCuts with up to 45 characters using the ShortCut preferences. All ShortCuts you  
create are available in any of your handheld computer applications and are backed up on your computer  
when you perform a HotSync operation.  
Your XP20 includes the following predefined Graffiti 2 ShortCuts for common entries:  
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ds—Date stamp  
ts—Time stamp  
dts—Date/time stamp  
me—Meeting  
br—Breakfast  
lu—Lunch  
di—Dinner  
To use a ShortCut:  
1. Draw the ShortCut stroke, followed by the ShortCut character or characters.  
2. When you draw the ShortCut stroke, the ShortCut symbol appears at the  
insertion point.  
To create a ShortCut:  
1. Tap the application launcher icon.  
2. Select prefs from the menu.  
3. Tap ShortCuts in the pick list in the upper right corner.  
4. Tap new.  
5. Enter the letters you want to use to activate the ShortCut in the ShortCut name line of the ShortCut  
entry screen.  
6. Tap the ShortCut text area, and then enter the text that will appear for the ShortCut characters.  
7. You can add a space character after the last word in your ShortCut text.  
8. Tap OK.  
To edit a ShortCut:  
1. In the ShortCut preferences screen, tap the ShortCut you want to edit.  
2. Tap edit.  
3. Make the changes you want; then tap OK.  
To delete a ShortCut:  
1. Select the ShortCut you want to delete in the ShortCut preferences screen.  
2. Tap delete > yes.  
Janam Technologies LLC  
5-5  
XP20 User Manual  
Use your computer keyboard  
You can enter information from your computer keyboard using Palm Desktop or any supported personal  
information manager (PIM) installed for use with your handheld computer. You can then perform a  
HotSync operation to synchronize the information on your computer with the information you entered on  
your handheld computer. All the main applications on your Janam XP20 are available in Palm Desktop and  
in most PIMs.  
Import data  
If you have data stored in computer applications such as spreadsheets and databases, or if you want to  
import data from another device, you can transfer the data to your Janam XP20 handheld computer  
without having to key it in manually. Save the data in one of the file formats listed below, import it into  
Palm Desktop and then perform a HotSync operation to transfer the data to your handheld computer.  
Palm Desktop can import data in the following file formats:  
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Comma delimited (.csv, .txt): address book and memo pad only.  
Tab delimited (.tab, .tsv, .txt): address book and memo pad only.  
CSV (Lotus Organizer 2.x/97 Mapping): address book only.  
Date book archive (.dba).  
Address book archive (.aba).  
To do list archive (.tda).  
Memo pad archive (.mpa).  
Archive formats can only be used with Palm Desktop. Use the archive file formats to share information  
with other people who use Palm Powered handhelds or to create a copy of your important Palm Desktop  
information.  
To import data:  
1. Open Palm Desktop.  
2. Click the application into which you want to import data.  
3. If you are importing records that contain a field with category names, do the following:  
Select all in the category box.  
Make sure that the same categories that appear in the imported file also exist in the application. If  
the categories do not exist, create them now; otherwise, the records will be imported into the  
unfiled category.  
4. Choose file > import; then select the file you want to import, and click open.  
5. Drag fields in the left column to import data into the correct Palm Desktop fields, so that they are  
opposite the corresponding imported field on the right.  
6. Deselect the field’s check box to exclude a field from being imported.  
7. Click OK. The imported data is highlighted in the application.  
8. Perform a HotSync operation to add the imported data to your handheld computer.  
See Palm Desktop online Help for more information on importing and exporting data.  
Use an external keyboard  
You can connect an external keyboard accessory to the serial connector of your handheld computer so you  
can type data directly into your handheld computer.  
Janam Technologies LLC  
5-6  
XP20 User Manual  
6
Manage Applications  
This chapter explains how to switch between applications on your Janam XP20, how to personalize  
application settings and how to categorize applications into related groups.  
Use the applications launcher  
The applications launcher (home button) displays all the available applications on your handheld computer  
by default. You can also display only selected applications by arranging applications into categories. All the  
applications installed on your Janam XP20 appear in the applications launcher, along with the current  
time, battery level, pick list and application category  
To open the applications launcher:  
1. Tap the applications icon (home key on your handheld).  
To open an application:  
Choose from the following options:  
Tap the applications icon, and then tap the specific application icon you need. Tap the scroll bar  
to view the applications not readily visible.  
Press an application button on the front panel to display the selected application.  
To switch between applications, tap the applications icon or press an application button on the front  
panel. Your work in the current application is automatically saved and displayed when you return.  
To categorize applications:  
1. Tap the applications icon on the front of your device.  
2. Tap the menu icon on the taskbar.  
3. Tap category from the app menu.  
4. Choose from the following options:  
Tap the pick list next to each application to choose a category for an application.  
Tap edit categories from the application pick list to create a new category for an application. Tap  
new, enter the category name, and tap OK.  
5. Tap done.  
To display applications by category:  
1. Tap the applications icon.  
2. Do one of the following:  
Tap applications icon repeatedly to cycle through all the categories.  
Tap pick list > category.  
Change the applications launcher display  
To change the view of applications:  
1. Tap applications > menu.  
2. Tap preferences from the options menu.  
3. Tap list from the view by option.  
Tap remember last category to display the last-selected category of applications when you open  
the applications launcher.  
4. Tap OK.  
Janam Technologies LLC  
6-1  
XP20 User Manual  
Set preferences for applications  
1. Open application > menu.  
2. Select preferences from the options menu.  
3. Enter preferences > OK.  
To assign applications to buttons:  
Buttons preferences let you assign different applications to the buttons on the front of the handheld  
computer and to the HotSync button on the cradle. You can also change whether the full-screen pen  
stroke activates the Graffiti® 2 Help application or one of your handheld computer controls using buttons  
preferences.  
Drag to top of screen  
If you assign a different application to a button, you can still select the original application using the  
applications launcher. Changes made in the buttons preferences screen or HotSync buttons dialog take  
effect immediately.  
To change the buttons preferences:  
1. Tap the applications launcher icon.  
2. Select all or system from the pick list in the upper right corner.  
3. Select prefs from the menu.  
4. Tap buttons in the pick list in the upper right corner.  
5. Tap the pick list next to the button you want to re-assign in the buttons preferences screen.  
6. Tap the application that you want to assign.  
TIP: To restore all of the buttons to their factory settings, tap default.  
To change the HotSync buttons preferences:  
1. Tap applications > prefs.  
2. Tap buttons in the pick list in the upper right corner.  
3. Tap hotSync in the buttons preferences screen.  
4. Tap the pick list next to the button you want to assign.  
5. Tap the application you want to assign to each button.  
The default setting for each button is the HotSync setting, which  
means the cradle performs its normal HotSync functions.  
6. Tap OK.  
Janam Technologies LLC  
6-2  
XP20 User Manual  
To change what the full-screen pen stroke activates:  
1. Tap the applications launcher icon.  
2. Select all or system from the pick list in the upper right corner.  
3. Select prefs from the menu.  
4. Tap buttons in the pick list in the upper right corner.  
5. Tap pen in the buttons preferences screen.  
6. Tap the pick list, and tap one of the following settings for the full-screen  
pen stroke:  
Backlight turns on the backlight.  
Keyboard opens the onscreen keyboard for entering text characters.  
Graffiti 2 Help opens a series of screens that show the complete Graffiti 2 character set.  
Turn off & lock turns off and locks the handheld computer. You must assign a password to lock  
the handheld computer. When locked, you need to enter the password to use your device.  
Beam data beams the current record to another connected organizer (if available).  
7. Tap OK.  
Install add-on applications  
1. Copy or download the applications you want to install from  
your computer desktop into the add-on folder in your Palm  
Desktop (typically located in ProgramFiles/palmone/addons)  
directory.  
Decompress the application into the add-on folder before  
continuing.  
2. Double-click the Palm Desktop icon on your computer  
desktop.  
3. Click quick install.  
TIP: You can also select the install tool dialog from the Palm  
Desktop program group or by double-clicking any file with a PRC  
file extension.  
4. Select the user name that corresponds to your Janam XP20 in  
the user drop-down list.  
5. Click add.  
6. Select the application that you want to install.  
7. Click open.  
The file appears in the install tool dialog.  
8. Select the list of files in the install tool dialog.  
Click remove if you decide not to install an application.  
Application is removed from the list of dialogs but not from  
your computer.  
9. Click done.  
10. A message indicates that the application(s) will be installed the  
next time you perform a HotSync operation.  
11. Perform a HotSync operation to install the applications.  
TIP: You can also select the install handheld files dialog by double-clicking any file with a PRC file  
extension.  
Remove applications  
1. Tap applications > menu.  
2. Tap delete from the app menu.  
3. Tap the application to remove in the delete dialog.  
4. Tap delete > yes > done.  
Janam Technologies LLC  
6-3  
XP20 User Manual  
Remove Palm Desktop software  
1. Choose settings > control panel from the start menu.  
2. Open the add/remove programs icon.  
3. Select Palm Desktop on the install/uninstall tab.  
4. Click add/remove.  
5. Select uninstall.  
6. Select Palm OS Desktop and click uninstall.  
NOTE: You must retain the HotSync manager from the  
installation CD to synchronize data with another PIM.  
Assign security options  
You can set options to protect entries from unauthorized users in a variety of ways:  
Mask or hide private entries: the mask option displays a gray bar over private records, and the hide  
option completely removes private records.  
Assign a password to viewing options to enhance security.  
-
Assigning a password requires you to enter a password before private entries can be viewed;  
Not assigning a password lets you view private entries when you show records from the security  
dialog.  
-
Lock and turn off your handheld computer so that a password must be entered before you can use  
the device again.  
Hide records that you have defined as private, with or without a password.  
-
Without a password, private records are hidden until you set the security application to display  
them;  
-
With a password, you must enter the password to view the private entries.  
To make a record private, use masking:  
1. Select the record > details > private > OK.  
2. Tap security from the applications launcher.  
3. Select the pick list under current privacy > mask records  
4. View the record.  
Records marked as private are masked with a gray bar.  
To hide private records:  
1. Select the record > details > private.  
2. From the applications launcher, tap security.  
3. In current privacy, pick list and tap hide records.  
When you return to the address book, records marked as private  
are not included in the display of names.  
Note that you can mask or hide records without assigning a password, or you can assign a  
password if you want records to remain masked or hidden until a password is entered.  
To assign, change or delete a password:  
1. Tap the applications icon.  
2. Tap the security icon in the applications launcher.  
3. Tap the password box.  
4. Enter a password > hint > OK.  
5. Choose from the following options:  
To assign a password, enter the password again > OK.  
To change your password, enter a new password > OK.  
To delete your password, enter your current password > OK > delete.  
Janam Technologies LLC  
6-4  
XP20 User Manual  
To lock your device with a password:  
1. Assign a password (see above instructions).  
Password is required before using the turn off and lock option.  
2. Tap lock & turn off device.  
System lockout dialog appears.  
3. Tap off & lock.  
4. Turn on your device.  
5. Enter your password at prompt > OK.  
IMPORTANT NOTE: If you synchronize with your computer before deleting a forgotten password, your  
handheld computer restores private entries the next time you perform a HotSync operation but does not  
restore the forgotten password. Deleting a forgotten password also deletes all entries and files marked as  
private.  
To delete a forgotten password:  
1. Tap the security icon in applications launcher.  
2. Tap forgotten password.  
3. Tap yes to delete the forgotten password.  
Janam Technologies LLC  
6-5  
XP20 User Manual  
Janam Technologies LLC  
6-6  
XP20 User Manual  
7
Work with Applications  
Your Janam XP20 includes the following basic applications: date book, address book, to do list, memo pad  
and calculator.  
Use the date book  
Press the date book button on your handheld computer to open the date book to today’s schedule to open  
the date book. The date is displayed at the top right of the screen.  
NOTE: Press the date book button repeatedly to cycle through the day, week, month and agenda views.  
The date book views are displayed at the bottom left of the screen.  
Schedule events  
An entry in the date book is called an event. You can schedule the following types of events:  
Timed events, such as meetings with a specific date and start and end time.  
Untimed events, which appear at the top of the list of times marked with a diamond.  
Repeating events, such as a weekly meeting held on the same day at the same time each week.  
Continuous events, such as a vacation or three-day conference.  
All-day events, which reflect the default length of the day as set by the user.  
To schedule a timed event for the current date:  
1. Select the date book application.  
2. Tap the line next to the time that corresponds to the event.  
Time bar shows  
default duration  
Tap a line next to  
desired time; then  
enter text  
3. Enter a description (up to 255 characters).  
4. Set the event’s duration:  
If the event is one-hour long, skip to the end of this procedure.  
For other timeframes, tap directly on the time to open the set time dialog.  
TIP: You can open the set time dialog (to select a start time), with no event  
selected, by writing a number on the number side of the text input area.  
5. Set the duration of the event in either of the following ways:  
Tap the time columns in the set time dialog to set the start time.  
Then, tap the time columns to set the end time.  
Tap all day if the event lasts all day.  
-
The default hours of a standard business day may be changed  
using the preferences command in the date book.  
6. Tap OK.  
Janam Technologies LLC  
7-1  
XP20 User Manual  
To schedule a timed event for another date:  
1. Select the date you want in one of the following ways:  
Tap the desired day of the week in the date bar at the top of the screen. If necessary, tap the  
previous week or next week scroll arrows to move to another week.  
Tap go to at the bottom of the screen to open the go to date dialog. Select a date by tapping a  
year, month and day in the calendar.  
2. After locating the desired date, follow the steps for scheduling an event for the current day.  
To schedule untimed events (will appear at the top of the list of times marked with a diamond):  
1. Select the event date.  
2. Tap new.  
3. Tap no time in the set time dialog. Note: you can also tap OK instead of no time.  
4. Enter description.  
Graffiti2 TIP: You can create a new untimed event by writing letters in the text input area.  
NOTE: If you create a timed event and later want to make it an untimed event, tap event time > no  
time > OK.  
To schedule repeating or continuous events:  
The repeat function lets you schedule events that recur at regular intervals or extend over a period of  
consecutive days.  
1. Tap the event (be sure to tap the event and not the time next to the event.). Typically, a continuous  
event is an untimed event.  
2. Tap details.  
3. Tap the repeat box to open the change repeat dialog.  
4. Tap day, week, month or year. For a continuous event, tap day.  
5. Enter a number that corresponds to how often you want the event to repeat on the every line.  
For example, if you select Month and enter the number 2, the event repeats every other month.  
6. Tap end on the pick list > choose date to set an end date for the repeating or continuous event.  
7. Tap OK. An icon that represents a repeating event appears to the far right on the event line.  
To change repeating or continuous events:  
When changes are made to a repeating or continuous event, you have  
the option of applying the change to just the current event; the current  
event and all future occurrences of this event; or all occurrences of this  
event – past, present and future.  
1. Select the event.  
2. Tap details. The event details dialog opens.  
3. Tap delete. The repeating event dialog opens.  
TIP: You can also select delete event from the record menu. This opens the repeating event dialog.  
4. Select one of the following options:  
Current deletes a single occurrence of this event  
Future deletes the current event and all future occurrences of this event  
All deletes all past, current, and future occurrences of this event.  
Janam Technologies LLC  
7-2  
XP20 User Manual  
The event is removed from your date book and you are returned to the day view where you started. These  
steps apply to all changes you make to repeating or continuous events.  
To reschedule an event:  
1. Tap the event > details > time box.  
2. Select a new time > OK.  
3. Tap date box, select a new date and then tap OK to change the date.  
To add address book information to an event:  
You can add a name, address, and telephone number to an event using the phone lookup option.  
Set the alarm  
The alarm setting lets you set an audible alarm for events in your date book and display a reminder  
message onscreen. For untimed events, only the reminder message appears.  
To set an alarm for an event:  
1. Tap the event.  
2. Tap details.  
3. Tap the alarm check box to select it. The default setting, 5 Minutes,  
appears.  
4. Set the alarm time:  
Select the 5 next to the alarm check box and enter any number  
from 0 to 99 (inclusive) as the number of time units.  
Tap the pick list to change the time unit; select minutes, hours or  
days.  
5. Tap OK.  
6. Tap the snooze option to dismiss the alarm for a five-minute period, once  
an alarm has gone off.  
To dismiss the alarm using the snooze option:  
Tap snooze to delay the alarm for a preset five-minute period when the alarm  
dialog appears. Each time you tap snooze, the alarm is dismissed for an  
additional five-minute period.  
To set alarm options:  
1. Do one of the following to open the preferences dialog:  
Tap the menu icon in the date book.  
Tap the inverted tab at the top of the date book screen to display  
the menu bar.  
Drag a diagonal line from the lower left to upper right to display the  
command toolbar in the text input area. Type an R, the Graffiti® 2  
ShortCut for the Preferences command.  
2. Tap preferences in the options menu.  
3. Select from the following options:  
Tap alarm preset to set an alarm for each new event automatically.  
The silent alarm for untimed events is defined by minutes, days or  
hours before midnight of the date of the event.  
Tap the alarm sound pick list > option.  
Tap remind me to define how many times the alarm sounds.  
Tap play every to set how often the alarm sounds.  
4. Tap OK.  
Janam Technologies LLC  
7-3  
XP20 User Manual  
Change the date book view  
To display the date book views:  
1. Do one of the following:  
Press the date book application button repeatedly to cycle through  
all the date book views.  
Tap a view icon in the lower-left area of the date book screen.  
To display the current time:  
Tap and hold down the stylus on the date in the date bar to display the time. When you release the  
stylus, the menu bar appears.  
To display and work in week view:  
1. Tap the week view icon or press the date book button until the week view appears.  
2. Tap the left and right navigation controls to move forward or backward a week at a time, or tap on  
a specific day to display the details of an event.  
NOTE: The week view also shows untimed events and events before and after the range of times  
displayed.  
Previous week  
Next week  
Bar indicates  
earlier event  
Dot indicates untimed event  
Week view  
Bar indicates later  
event  
3. Tap an event to display a description of the event at the top of the  
screen.  
Tips for using week view  
Tap and drag event to a different time or day to reschedule.  
Tap a blank time on any day to move to that day.  
Tap any day or date that appears at the top of the week view to  
move directly to that day without selecting an event.  
Janam Technologies LLC  
7-4  
XP20 User Manual  
To display and work in month view:  
The month view screen shows which days have events scheduled. Dots and lines in the month view  
indicate events, repeating events and untimed events.  
Previous/ next month  
Dashed line indicates  
continuous event  
Dots below date  
indicate untimed events  
Dots below date  
indicate untimed events  
Month view button  
Tips for using month view:  
Tap a day in the month view to display that day in the day view.  
Tap the scroll arrows in the upper right corner to move forward or backward a month.  
Tap go to in order to open the date selector and select a different month.  
Use the scroll buttons on the front panel of your handheld computer to move between months.  
To display and work in agenda view:  
1. Tap the agenda view icon or press the date book button until the  
agenda view appears.  
2. Use the navigation bars to move forward or backward a day at a  
time or to display more to do items.  
Tips for using agenda view  
Tap any appointment while in agenda view to display the day  
view.  
Check off completed to do list items in the agenda view, or click  
a description of an item to go directly into the to do list  
application.  
Tap on the pick list and select the new category to make changes.  
Change the date book display  
You can change which events appear in the date book.  
To change the date book display of events:  
1. Tap the menu icon in day or month view.  
2. Tap options > display options.  
3. Select from the following options for day view:  
Tap show time bars to display time bars showing the duration of  
an event and any event conflicts.  
Tap compress day view to display start and end times for each  
event, but no blank time slots at the bottom of the screen, to  
minimize scrolling. Clear the option to display all time slots.  
4. Select whether to display show timed events, show untimed  
events or show daily repeating events for month view.  
5. Tap OK.  
Janam Technologies LLC  
7-5  
XP20 User Manual  
To change displayed start and end time in the date book:  
1. Tap the menu icon in the date book.  
2. Tap option > preferences.  
3. Tap start time and use the scroll arrows to select a new start time for  
the date book screens. Repeat the step to set a new end time.  
4. Tap OK.  
Use the address book  
The address book lets you keep names, addresses, telephone numbers and  
other information about your personal or business contacts.  
To open the address book:  
Press the address book button on the front panel of your handheld computer to open and display the list  
of all your records.  
NOTE: Press the Address Book button repeatedly to cycle through the categories in which you have  
records.  
To create a new address book entry:  
1. Press the address book icon.  
2. Tap new.  
Cursor at last name  
Tap New  
3. Enter the last name of the person you want to add.  
4. Tap the first name field to move to it. You can move to any field by  
tapping it directly.  
5. Enter the individual’s first name in the field.  
6. Enter the relevant information in the company field.  
7. Enter other information in the related fields that you want to include  
in the entry.  
8. Tap the scroll arrows to move to the next page of information.  
9. Tap note to attach a note to an entry. Enter the information you want  
in the text input area, and then tap done.  
10. Tap done.  
TIP: To create an entry that always appears at the top of the address list, begin the last name or company  
field with a symbol, as in *If Found Call*. This entry can contain contact information in case you lose your  
handheld computer.  
Janam Technologies LLC  
7-6  
XP20 User Manual  
To view details of an address entry:  
1. Tap the address entry in address list view. The entry appears.  
2. Tap done when you have finished viewing the entry.  
To duplicate an existing entry:  
1. Tap a name you want to duplicate from the address book.  
2. Do one of the following:  
Tap the address edit tab at the top of the screen; then tap duplicate record in the record  
menu.  
Drag a diagonal line from the lower left to upper right to display the command toolbar in the text  
input area of your device’s screen; then write a T in the text input area to initiate the duplicate  
record command.  
3. Edit the record as necessary.  
To select different types of phone numbers and addresses:  
1. Tap the entry that you want to change in the address list.  
2. Tap edit.  
3. Tap the pick list next to the label you want to change.  
Tap  
triangle  
4. Select a new label.  
To edit address book entries:  
1. Tap the entry that you want to change in the Address list.  
2. Tap edit.  
3. Tap details.  
4. Select any of the following settings in the address entry details dialog:  
Tap show in list, and in the pick list tap which type of phone or  
other information you want to appear.  
Tap category, and then tap a category in the pick list that you want to assign to the entry.  
Tap private to hide the entry when security is turned on.  
5. Tap note, enter information and tap OK.  
6. To delete an entry, tap delete.  
7. Tap OK.  
To change the address book display:  
1. Tap the menu icon.  
2. Tap options > preferences.  
3. Choose an option to sort address book lists from the list by pick list:  
Tap last, first name to sort alphabetically by an individual’s last  
name and then first name.  
Tap company, last name to sort alphabetically by the company  
name and then an individual’s last name.  
4. Tap OK.  
Janam Technologies LLC  
7-7  
XP20 User Manual  
To add custom fields at the end of address edit screens:  
1. Tap the menu icon in the address list or in address view.  
2. Tap options > preferences.  
3. Tap rename custom fields.  
4. Rename the fields to identify the information you’ll enter in the text input  
area. The names you give the custom fields appear in all entries, at the  
end of the address edit screen.  
5. Tap OK in the rename custom fields dialog.  
6. Tap done.  
To control the address book display on returning to the application:  
1. Tap the menu icon in the address list or in address view.  
2. Tap options > preferences.  
3. Select an option in the address book preferences dialog:  
To redisplay the last category you selected on returning to the  
application, tap the remember last category check box to select it.  
To display the all category on returning to the application, tap the  
remember last category check box to clear it.  
4. Tap OK.  
Use the to do list  
The to do list is a convenient place to create reminders and prioritize the things that you have to do.  
To open the to do list:  
Press the to do list application button on the front panel of your handheld computer. To Do List opens to  
display the category of items you last viewed.  
NOTE: Press the to do list application button repeatedly to cycle through the categories in which you  
have items.  
To create a to do list item:  
1. Press the to do list icon.  
2. Tap new.  
3. Enter text. The text can be longer than one line.  
TIP: You can add a name, address and phone number using the phone lookup option.  
4. Tap anywhere onscreen to deselect to do list item.  
TIP: If no to do list item is currently selected, writing in the text input area automatically creates a new  
item.  
Janam Technologies LLC  
7-8  
XP20 User Manual  
To set to do list priorities:  
1. Tap show at the bottom of the list, tap show priorities if priorities aren’t visible and tap OK.  
2. Tap the priority number on the left side of the item.  
Tap here  
Tap to select  
priority  
3. You can change the priority number that is displayed, with one the most important and five the least  
important.  
To check off to do list items:  
1. Tap show > show completed items. If you clear this setting, your  
items disappear from the list when you complete (check) them.  
2. Tap the check box on the left side of the item.  
NOTE: Items that no longer appear on the list because show completed  
items is turned off have not been deleted. They are still in the memory of  
your (device type, lower case). You must purge completed items to  
remove them from memory.  
To change priorities and due dates:  
1. Tap the item that you want to change.  
2. Tap details.  
3. Tap no date to open the due date pick list in the details dialog.  
4. Tap the date that you want to assign the item.  
5. Tap private to hide this item when security is turned on.  
6. Tap OK.  
TIP: If you turn on the show due dates option in the to do preferences dialog, you can tap directly on the  
due date in the to do list to open the pick list shown in step 2.  
To sort to do items:  
1. Tap show.  
2. Tap sort by and then select an option from the pick list:  
Tap priority, due date to sort items by priority first, and then due  
date.  
Tap category, priority to sort items by category first, and then  
priority.  
3. Tap OK.  
Janam Technologies LLC  
7-9  
XP20 User Manual  
To display completed and due items:  
1. Tap show.  
2. Choose from the following settings:  
Tap show completed items to display your completed items in the to do list.  
Tap show only due items to show only the items that are currently due, past due or have no  
due date specified.  
Tap record completion date to replace the due date with the actual date when you complete  
(check) the item.  
Tap show due dates to display the due dates for items and an exclamation mark next to items  
that remain incomplete after the due date passes.  
3. Tap OK.  
Use the calculator  
Tap the calculator icon next to the text input area to open it.  
To use the calculator buttons:  
The calculator includes several buttons to help you perform calculations.  
Clears the last number you entered.  
Clears the entire calculation and enables you to begin a fresh calculation.  
The Plus/Minus button toggles the current number between a negative and  
positive value. If you want to enter a negative number, enter the number first  
and then press the +/- button.  
The M+ button places the current number in memory. Pressing this button  
has no effect on the current calculation (or series of calculations); it merely  
places the value into memory until it is recalled.  
The MR button recalls the stored value from memory and inserts it in the  
current calculation.  
The MC button clears any value that is stored in the Calculator memory.  
To display recent calculations:  
1. Tap the menu icon.  
2. Tap options > recent calculations.  
3. Tap OK when you have finished reviewing the calculations.  
Janam Technologies LLC  
7-10  
XP20 User Manual  
Use the memo pad  
Press the memo pad icon to display the last screen that you viewed.  
NOTE: Press the memo pad application button repeatedly to cycle through the categories in which you  
have memos.  
To create memos:  
1. Press the memo pad icon.  
2. Tap new.  
Tap New  
TIP: You can also create a new memo by beginning to write in the text input area in the memo list  
screen. The first letter is automatically capitalized and begins your new memo.  
3. Enter the text you want to appear in the memo. Use the carriage return stroke to move down to new  
lines in the memo.  
4. Tap done.  
To review memos:  
1. Tap the text of the memo in the memo list.  
Tap a memo  
to review its  
contents  
2. Review or edit the text in the memo.  
3. Tap done.  
Janam Technologies LLC  
7-11  
XP20 User Manual  
To move through a memo you are reviewing:  
1. Tap the text of the memo you want to review.  
2. Tap the menu icon in the lower left corner of the screen of your handheld computer.  
3. Tap options.  
4. Tap one of the following options to go to the beginning or end of the memo:  
Tap go to top of page to move to the top (first) line of the memo.  
Tap go to bottom of page to move to the bottom (last) line of the memo.  
To change the order in which memos appear in the memo list:  
1. In the memo list, tap the menu icon in the lower left corner of the screen of your handheld computer.  
2. Tap options.  
3. Tap preferences, and choose one of the following options:  
Tap manual to sort new memos in the sequence in which you create them.  
Tap alphabetical to sort new and existing memos in numerical and then alphabetical sequence.  
4. Tap OK.  
Janam Technologies LLC  
7-12  
XP20 User Manual  
8
Use the Attention Manager  
Many applications (date book and clock) have some sort of alarm. Attention manager allows you to  
conveniently manage all of these notifications in one place.  
Insistent alarms  
Insistent applications open a reminders dialog, and may play a sound, flash  
an LED or vibrate, depending on your hardware configuration. Alarms  
continue until you snooze or dismiss them. If the sound can be interrupted,  
you can tap anywhere on the dialog, or push any button to silence it.  
Attention manager always open immediately when new insistent alarms are  
posted.  
To use the reminder dialog:  
The reminder dialog has three buttons for responding to an alarm:  
OK: Makes the reminder go away, with no further notification.  
Snooze: Switches to the application that was running when the alarm went  
off, and returns to the reminder dialog after five minutes. Go back to the reminder dialog right away by  
tapping on the blinking indicator in the upper left corner of the dialog.  
Go to: Switches to the application that created the alarm, and shows the record that caused the alarm,  
although you may have to navigate within the application. There is no further notification.  
To set alarm volume:  
You control most alarm volumes globally in the general panel of the prefs  
menu:  
1. Tap the prefs icon in the applications launcher.  
2. Tap the general pick list in the upper right corner of the dialog.  
3. Set the volume using the alarm sound pick list. If your device has an  
alarm or vibrate LED feature, turn these features on or off using their pick  
lists in this menu.  
To set alarm sound effects:  
1. Tap the menu icon while displaying the date book application.  
2. Tap the options menu > preferences.  
3. Tap the alarm preset check box, if you want alarms to sound  
4. Select the following from the pick lists:  
Alarm preset: How soon you want the alarm to sound before the  
event  
Alarm sound: The alarm song or sound effect (for example, Bird or  
Concerto)  
Remind me: How many times the alarm repeats before giving up  
Play every: The pause between each time the alarm sounds  
Janam Technologies LLC  
8-1  
XP20 User Manual  
To use the reminders list dialog:  
The reminders dialog changes to a list of items that require your attention  
under two insistent alarm conditions:  
When a second application attempts to get your attention and the first has  
not been dismissed or snoozed.  
When a first application makes a second attempt and has not been  
dismissed or snoozed.  
o
o
Each listed reminder contains the date and time of the event.  
Depending on the application displaying the reminder, you may see an  
icon representing the application and up to two lines of text.  
Tapping on the text or icon will “go to” that item and delete the event  
from the reminders list dialog.  
Tapping in the check box will clear that item. The attention manager will draw a line through the text  
lines, pause for a moment and then remove the item from the list.  
The reminders list dialog displays three buttons that are used to respond to all of the items in the list:  
o
o
Snooze: Puts the reminders list dialog to sleep for five minutes.  
Done: If the reminders list appeared because of more than one insistent alarm, tapping done  
closes the reminders list dialog.  
ƒ
If the reminders list appeared after you tapped the snooze button, tap the blinking alarm  
indicator, then tap the done button and the reminder will continue to snooze.  
o
Clear all: removes all of the items from the list, but does not close the reminders dialog. Tap this  
button to erase a list of events that have passed  
Subtle alarms  
Some applications provide a visual and optionally audible indication, but do not otherwise disrupt your  
workflow. Subtle alarms do not display a reminders dialog. Instead, a blinking indicator will flash in the  
upper left corner of the title bar (of applications that allow it) when an alarm is present.  
To understand the blinking alarm indicator:  
The indicator appears in three different states:  
Off: The indicator is not shown at all when the list is empty.  
Blinking, two states: When the list is not empty but there are no  
new items, then the “star” indicator will blink on and off until the  
list has been emptied.  
Blinking, three states: When a new subtle alarm is received, the  
star will alternate flashing solid, exploded, then off, until you view  
the new event.  
Tapping on the indicator opens the attention manager in list mode, even if there is only one item.  
Janam Technologies LLC  
8-2  
XP20 User Manual  
9
Use an Expansion Card  
Janam XP20 lets you add a handheld computer expansion card to your device. You can insert and remove  
the card without a reset.  
Display contents of Janam XP20  
When an expansion card is inserted, all applications listed in the card's launcher directory are  
automatically added to a new launcher category. This category is assigned the name of the expansion card  
volume; for example, the name “My Card” is used throughout this section.  
To display the contents of your Janam XP20:  
1. Tap the applications launcher icon on your Janam XP20.  
2. Tap the all pick list in the upper right corner of the screen.  
3. Tap the Janam XP20 on the menu.  
The applications are displayed.  
Launch an application  
To launch an application:  
1. Press the applications launcher icon on the front of your Janam XP20.  
2. Tap the all pick list in the upper right corner of the screen.  
3. Tap the Janam XP20 on the menu.  
The applications are displayed on the applications menu.  
4. Tap the application that you want to launch. The selected application is loaded into memory and  
launched. If the application is already resident in main memory, it is not copied again, just launched.  
Display XP20 application information  
To display information about an application:  
1. Press the applications launcher icon on the front of your device.  
2. Tap the all pick list in the upper right corner of the screen.  
3. Tap my card at the bottom of the menu.  
The applications are displayed on the applications screen.  
4. Tap the upper left corner of the screen to show the app menu.  
5. Tap info.  
6. Tap my card from the device pick list. The size of the application is  
displayed.  
7. Tap version to display the application version.  
Janam Technologies LLC  
9-1  
XP20 User Manual  
TIP: When you tap more, you access the card info application.  
Copy an application to your handheld or desktop  
To copy an application on your Janam XP20 to your handheld or  
desktop:  
1. Press the applications launcher menu on the front of your handheld  
Janam XP20.  
2. Tap the all pick list in the upper right corner of the screen.  
3. Tap the Janam XP20 on the menu.  
The applications are displayed on the applications screen.  
4. Tap the upper left corner of the screen to show the app menu.  
5. Tap copy.  
6. Select the source and the destination using the copy to and the from pick  
lists.  
7. Select the application > copy. The application is copied to the selected  
destination.  
TIP: Some applications and databases are copy-protected and cannot be beamed.  
These are listed with a lock icon next to them.  
Beam applications  
To beam an application on your Janam XP20 to another Palm OS®  
handheld:  
1. Tap the applications launcher icon on your handheld computer.  
2. Tap the all pick list in the upper right corner of the screen.  
3. Tap the Janam XP20 on the menu.  
The Janam XP20 applications are displayed on the applications screen.  
4. Tap in the upper left corner of the screen to show the app menu.  
5. Tap beam.  
6. Select my card from the beam from pick list.  
7. Select the application you want to beam, then tap done.  
8. Highlight the application you want to delete and tap done. The application  
is beamed to the other handheld.  
TIP: Some applications and databases are copy-protected and cannot be beamed. These are listed with a  
lock icon next to them.  
Delete applications  
To delete an application:  
1. Tap the applications launcher icon on your handheld computer.  
2. Tap the all pick list in the upper right corner of the screen.  
3. Tap the Janam XP20 on the menu.  
Applications are displayed.  
4. Tap in the upper left corner of the screen to show the app menu.  
5. Tap delete.  
6. Select my card from the delete from pick list.  
7. Highlight the application you want to delete, then tap done.  
The application is deleted. Applications that are loaded in ROM (e.g., memo pad) cannot be deleted and  
are not listed.  
Janam Technologies LLC  
9-2  
XP20 User Manual  
Use card info  
The card info application displays summary information for each known directory type found on the Janam  
XP20.  
To use card info:  
1. Tap the card info icon on the applications menu.  
The Janam XP20 information is displayed.  
2. Tap on the card info tab in the upper left corner of the  
screen to rename the Janam XP20.  
3. Select rename card, and enter the new name in the rename card  
dialog.  
4. Tap rename.  
5. Tap card info > format card > OK in the format card dialog.  
NOTE: Reformatting the Janam XP20 will destroy its data.  
6. Tap card info to display help.  
7. Select help from the menu, and scroll through the tips that are displayed.  
8. Tap card info, then tap about card info.  
Janam Technologies LLC  
9-3  
XP20 User Manual  
Janam Technologies LLC  
9-4  
XP20 User Manual  
10  
Perform Common Tasks  
The tasks described in this section use the term records to refer to an individual item in any of the basic  
applications: a single date book event, address book event, to do list item or memo pad memo.  
Create records  
Use the following procedure to create a new record in date book, address book, to do list and memo pad.  
To create a record:  
1. Select the application.  
2. Tap new. (For the date book only, select start and end times for your appointment and tap OK.)  
3. Enter text for the record.  
4. Tap details to select optional attributes.  
5. Tap done only in the address book and memo pad. Your handheld computer saves the new record  
automatically.  
Edit records  
After you create a record, you can change, delete or add new information at any  
time. When the screen is in edit mode, a blinking cursor appears within the  
information and the information appears on a dotted gray line called an edit  
line.  
To select text:  
Select the text you want to edit using one of the following techniques:  
Double-tap on a word in a field to select the word.  
Triple-tap on any word on a line to select the entire line.  
Drag across a line of text to select some or all of the information, or drag  
down to select text across multiple lines.  
To use the edit menu:  
The edit menu is available from any screen where you enter or edit text. As a general rule, commands  
affect selected text. Display the edit menu in three ways: tap the menu icon, tap the inverted tab at the  
top of the screen or by writing a Graffiti® 2 ShortCut.  
1. Do one of the following to display the edit menu:  
Tap the menu icon > edit.  
Tap the inverted tab at the top of the screen, and then tap  
edit.  
In the text input area, drag a diagonal line from the lower left to upper right to display the  
command toolbar. To select a command, either tap the icon representing a command on the  
command toolbar or draw the Graffiti 2 ShortCut in the text area of your screen.  
2. Choose from the following commands, depending on the application.  
Undo reverses the last action taken.  
Cut removes a selection from its current location to memory. You can then paste the text into  
another area of the current application or into a different application.  
Copy copies a selection and moves it to memory. You can paste the selection into another area of  
the current application or into a different application.  
Paste inserts a selection from memory into an area you select. Paste produces no result if you  
have not used the cut or copy commands.  
Select all selects all the text.  
Janam Technologies LLC  
10-1  
XP20 User Manual  
Keyboard opens the onscreen keyboard. Tap done to close the keyboard.  
Graffiti 2 Help opens the Graffiti 2 character stroke screen.  
To delete records:  
1. Select the record you want to delete.  
2. Do one of the following:  
Tap the menu icon > open record menu > tap delete (trash can).  
The delete command differs depending on the application you’re using.  
-
Tap the inverted tab at the top of the screen, open the record menu and then select the desired  
delete command.  
In the details dialog of the application, tap delete > OK.  
Delete the text of the record.  
-
NOTE: In the date book, deleting the text of a repeating event deletes all instances of the  
event.  
In the text input area, drag a diagonal line from the lower left to upper right to display the  
command toolbar; then tap the delete icon or draw a Graffiti 2 ‘D’ in the text area. A  
confirmation dialog appears.  
3. To archive a copy of the deleted file on your PC, select the save archive option. The record is  
transferred to the archive file on your PC the next time you perform a HotSync operation.  
4. Tap OK to delete the record.  
To purge records:  
1. Open the application.  
2. Choose from the following options:  
Tap menu > record > purge. A confirmation dialog appears.  
Tap inverted tab > record > purge.  
3. Choose from the following options:  
Date book: select the delete events older than … pick list and choose option. Tap OK.  
Date book/to do list: select save archive copy on PC to save a copy of purged records in an  
archive file on your desktop. Tap OK.  
To categorize records:  
When you create a record, it is automatically assigned to the currently displayed category. A record can  
remain unfiled or it can be assigned to a category at any time. Each application has a default set of  
categories:  
Address book includes a business, personal and QuickList category.  
To do list includes a business, personal and all category.  
Memo pad includes a business, personal and all category.  
Rename or delete the default categories, or you can create new categories. Each application can have up  
to 15 categories.  
To move a record into a category:  
1. Select the record you want to categorize.  
2. Tap details. (From the address view screen, tap edit first.)  
3. Tap the category pick list, select the desired category and then tap OK in the details dialog.  
Janam Technologies LLC  
10-2  
XP20 User Manual  
To display a category of records:  
1. Open one of the following applications: address book, to do list or memo pad.  
2. Tap the pick list in the upper right corner of the screen.  
3. Tap the category.  
Tap pick list  
Select a category  
TIP: Pressing the address book, to do list or memo pad button on your handheld computer toggles  
through the categories assigned to the application, respectively.  
To add or edit application categories:  
1. In the address book, to do list or memo pad application, choose from the following options:  
Tap the pick list in the upper right corner of the screen, and tap edit categories.  
Edit categories  
In address book: select record > edit > details. In the category pick list, tap edit categories.  
In memo pad/to do list: record > details. In the category pick list, tap edit categories.  
2. Select any of the following options:  
To create a new category, tap new > enter name > OK.  
To rename a category, tap category > rename > enter name > OK.  
Janam Technologies LLC  
10-3  
XP20 User Manual  
To rename a category:  
1. Tap the pick list > edit categories.  
2. Select the category you want to rename and then tap rename.  
3. Enter the new category name, tap OK.  
4. Tap OK.  
TIP: You can move records from multiple categories into a single category by renaming all discrete  
categories with a single category name.  
To find records:  
Your handheld computer lets you find information in several ways:  
In all applications, starting with the current application, you can locate selected text.  
In the date book, to do list and the memo pad, you can use phone lookup to display the address list  
screen and add the information from this list to a record.  
In the address book, you can use the look up option to enter the first letters of a name to scroll  
immediately to that name.  
To find address book records:  
Use the scroll button on the front panel of your device or type the first few letters of a name in the look up  
option at the bottom of the address screen.  
To look up an address book record:  
Do one of the following:  
From the address screen, enter the first few letters of the name.  
Look Up option  
Use the scroll button on the front of the device to scroll a screen at a time. Holding down the scroll  
button accelerates scrolling.  
Janam Technologies LLC  
10-4  
XP20 User Manual  
To use the find option:  
1. Tap the find icon.  
2. Enter the text you want to find; then tap OK.  
Note that the find option is not case sensitive; searching for "davidson" also finds "Davidson."  
TIP: Select text in an application before tapping find to automatically place the text in the find dialog.  
Find searches for the text in all records and all notes within all applications.  
NOTE: Find will locate all matches that begin with the supplied text. It will not find words where the  
supplied text appears in the middle or at the end of a word.  
To use phone lookup:  
1. Display the record in which you want to insert a phone number.  
2. Do one of the following:  
Tap the menu icon > options > phone lookup.  
Tap the inverted tab > options > phone lookup.  
In the text input area, drag a diagonal line from the lower left to upper right to display the  
Command toolbar. In the text area, write an L, the ShortCut for the phone lookup command.  
3. Select a record or write the first few letters of the name you want to add. Tap add.  
NOTE: You can also search based on selected text. Drag to highlight the text, then follow step 2 above.  
When the search is complete, the name and phone number of the candidate will replace the selected text.  
To sort records:  
You can sort lists of records in various ways, depending on the application. Sorting is available in  
applications that display lists—in the Address Book, To Do List, and Memo Pad.  
To sort records in the to do list:  
1. Open the application to display the list screen.  
2. Tap show.  
3. Tap the sort by pick list, and select an option.  
4. Tap OK.  
To sort records in the address book and memo pad:  
1. Open the application to display the list screen.  
2. Do one of the following:  
3. In the preferences dialog, tap the option you want; then tap OK to sort the list.  
Tap the menu icon. From the options menu, tap preferences.  
Tap the inverted tab at the top of the screen; then tap preferences in the options menu.  
Drag a diagonal line from the lower left to upper right to display the command toolbar in the text  
input area. Write an ‘R’, the ShortCut for the preferences command in the text area.  
To sort the memo list manually:  
1. Tap and drag a memo to a new location in the list.  
Janam Technologies LLC  
10-5  
XP20 User Manual  
To make records private:  
1. Do one of the following in your application:  
Create a new record > edit > details.  
Select an existing record > details.  
2. Tap the private check box > OK.  
3. Tap OK at the alert in the private records dialog.  
To hide private records:  
1. Do one of the following:  
Tap the applications icon; then tap security.  
Tap the inverted tab at the top of the screen from within an application; then tap security in the  
options menu.  
Bring up the command bar and tap the padlock icon from within any application. To bring up the  
Command Bar, drag your pen diagonally across the text input area from lower left to upper right.  
2. Tap hide records; then tap OK in the change security dialog in the current privacy pick list.  
To display private records:  
1. Do one of the following:  
Tap the applications icon; then tap security.  
Tap the inverted tab at the top of the screen from within an application; then tap security in the  
options menu.  
Bring up the command bar and tap the padlock icon from within any application. To bring up the  
command bar, drag your pen diagonally across the text input area from lower left to upper right.  
2. Tap show records from the current privacy pick list and then tap OK.  
3. Enter the password before the hidden records are displayed if you have a password assigned.  
4. Enter your password, and then tap show.  
To attach notes:  
You can attach notes to records in all the basic applications except the Memo Pad. A note can be up to  
several thousand characters long.  
1. Display the entry to which you want to add a note.  
2. Tap edit in address book only.  
3. Tap details.  
4. Tap note; then enter the desired note.  
5. Tap done. A note icon appears to the right of any item containing a note.  
Janam Technologies LLC  
10-6  
XP20 User Manual  
Note icon  
To review or edit a note:  
1. Tap the note icon. This opens the note ready to read/edit.  
2. Highlight and delete text in the note or view the entire note.  
3. Tap done after you have read/edited the note.  
To delete a note:  
1. Tap the note icon.  
2. Tap delete.  
3. Tap yes to delete the note.  
Choose fonts  
You can change the font style in all basic applications. You can choose a different font style for each  
application.  
Small font  
Large font  
Bold font  
To change the font style:  
1. Open an application.  
2. Do one of the following:  
Tap the menu icon. From the options menu, tap font.  
Tap the inverted tab at the top of the screen; then tap font in the options menu.  
In the text input area, drag a diagonal line from the lower left to upper right to display the  
Command toolbar. In the text area, write an F, the ShortCut for the font command.  
Janam Technologies LLC  
10-7  
XP20 User Manual  
3. Tap the font style you want; then tap OK.  
Tap here for bold font  
Tap here for large font  
Tap here for small font  
Get information on an application  
The about box displays the name and version number of the application.  
To display the about box:  
1. Tap the menu icon from any location.  
2. Tap about in the options menu.  
Janam Technologies LLC  
10-8  
XP20 User Manual  
11  
Beam Information  
You can beam the following information between Janam connected organizers:  
The record currently displayed in date book, address book, to do list or memo pad.  
All records of the category currently displayed in the address book, to do list or memo pad  
applications.  
A special address book record that you designate as your business card that contains information you  
want to exchange with business contacts.  
An application installed in RAM memory.  
NOTE: HotSync operations can also be done using the IR port.  
For best results, Janam XP20 handheld computers should be between 10 centimeters (approximately 4  
inches) and 1 meter (approximately 39 inches) apart, and the path between the two devices must be clear  
of obstacles. Beaming distance to other connected devices may be different.  
Beam a business card  
To select a business card for beaming:  
1. Press the address book button on the front of your device.  
2. Create a new entry or select an entry in the address list, which contains the information you want  
on your business card.  
3. Tap record in address view.  
4. Tap select business card.  
5. Tap the menu icon.  
6. Tap yes in the select business card dialog.  
Beam a record  
To beam a record, business card or category of records:  
1. Locate the record, business card or category you want to beam.  
2. Tap the menu icon.  
3. Tap record.  
4. Choose from the following options:  
Tap beam to beam an individual item.  
Tap beam business card in the address book application.  
Press the address book application button for about two seconds to beam your business card.  
Tap beam category (for records that are displayed in a category).  
Use the Graffiti® 2 Command stroke /B to beam the current entry.  
NOTE: You can set the full-screen pen stroke to beam the current entry.  
5. Point the IR port directly at the IR port of the receiving handheld computer when the beam status  
dialog appears.  
6. Resume working on your handheld computer when the beam status dialog indicates that the transfer  
is complete.  
Janam Technologies LLC  
11-1  
XP20 User Manual  
Beam an application  
To beam an application:  
1. Tap the applications launcher icon.  
2. Tap the menu icon.  
3. Tap app > beam.  
4. Select the application to be beamed from the beam dialog.  
5. Tap beam.  
NOTE: Some applications are copy-protected and cannot be beamed, if indicated by a lock icon.  
6. Point the IR port directly at the IR port of the receiving handheld computer when the Beam Status  
dialog appears.  
7. Resume working on your handheld computer when the Beam Status dialog indicates that the transfer  
is complete.  
Receive beamed information  
To receive beamed information:  
1. Turn on your handheld computer.  
2. Point the IR port directly at the IR port of the transmitting handheld computer to open the beam  
status dialog.  
3. Tap yes.  
4. Wait for the beam status dialog to indicate that the transfer is complete.  
5. Tap OK to display the new entry. The incoming records are placed in the unfiled category.  
Turn off beaming  
To turn beaming on or off:  
1. Tap the applications icon.  
2. Select all or system from the pick list in the upper right corner of the screen.  
3. Tap preferences.  
4. Tap general from the pick list in the upper right corner.  
5. Tap the beam receive pick list on the general preferences dialog.  
6. Tap on or off to select the option.  
Janam Technologies LLC  
11-2  
XP20 User Manual  
12  
Exchange and Update Data using HotSync®  
HotSync technology lets you synchronize—exchange and update—data between one or more Janam  
connected organizers and Palm Desktop using either a USB or serial cable. To synchronize data, you must  
connect your Janam XP20 and Palm Desktop either directly, by placing your handheld computer in the  
cradle attached to your computer or using infrared communications, or indirectly, with a modem or  
network.  
The first time you synchronize your data, you must enter user information on both the handheld computer  
and Palm Desktop. After you enter this information and synchronize, the HotSync Manager recognizes  
your handheld computer and doesn’t ask for this information again.  
If you are a System Administrator preparing several handheld computers for a group of users, you may  
want to create a user profile. See creating a user profile later in this chapter before performing the  
following steps.  
Perform the first local HotSync operation  
You must perform your first HotSync operation with a local, direct connection, rather than using a modem.  
The following steps assume that you have already installed the Palm Desktop.  
To perform a local HotSync operation:  
1. Insert your handheld computer into the cradle. The bottom edge of the handheld computer should  
align smoothly with the cradle when it is inserted properly.  
2. Connect the cradle to your computer using the appropriate cable.  
3. On the Janam XP, tap applications > HotSync icon.  
4. Tap local > cradle/cable.  
Windows. On Windows, the HotSync Manager must be running for the HotSync operation to  
proceed. If it is running, the HotSync icon appears in the Windows system tray. If the HotSync  
Manager is not running, select the start button > programs > Palm Desktop program group  
> palmOne Hotsync manager.  
5. Press the HotSync button on the cradle.  
6. Select local > cradle/cable.  
NOTE: If you are using an optional HotSync cable instead of a cradle, tap the HotSync Manager icon in  
the Windows system tray and select local from the menu.  
7. Select the user name you entered when you installed Palm Desktop. The HotSync Progress dialog  
appears and synchronization begins.  
8. When the HotSync process is complete, a message appears, and you can remove your handheld  
computer from the cradle.  
Create a user profile  
You can create a user profile to load data into a Janam XP20 without associating that data with a user  
name. This feature lets system administrators configure several Janam handheld computers with  
specific information (such as a company phone list) before distributing them to their actual users. On  
Windows, you use the file link feature of the Palm Desktop to import information from external files later  
in this chapter. The user profile feature is designed only for the first-time HotSync operation, before you  
assign a user ID to a particular handheld computer.  
Janam Technologies LLC  
12-1  
XP20 User Manual  
To create a user profile:  
1. Open Palm Desktop.  
2. Choose users from the tools menu.  
3. Select profiles.  
4. Tap new, enter an unique name for the profile and select OK.  
5. Tap OK to return to Palm Desktop.  
6. Select the profile from the user list, and create the data for the profile (e.g., company phone list).  
To use a profile for the first-time HotSync operation:  
1. Place the handheld computer in the cradle.  
2. Press the HotSync button on the cradle.  
3. Select profiles.  
4. Select the profile that you want to load, and tap OK.  
5. Choose yes to transfer all the profile data to the handheld computer.  
Select HotSync setup options  
You can choose when you want HotSync Manager to run. If necessary, you can adjust the local and  
modem HotSync settings as well.  
To set the HotSync options:  
1. Click the HotSync Manager icon in the Windows system tray.  
2. Choose setup > general.  
3. Select one of the following options:  
Always available (default setting): adds HotSync Manager  
to the Startup folder and constantly monitors the  
communication port for synchronization requests from your  
handheld computer. With this option, the HotSync Manager  
synchronizes data even when Palm Desktop is not running.  
Available only when Palm Desktop is running: starts  
HotSync Manager and monitors requests automatically when  
you open Palm Desktop.  
Manual: monitors requests only when you select HotSync Manager from the start menu.  
NOTE: If you’re not sure which option to use, keep the default setting, always available.  
4. Click the local tab to display the settings for the connection  
between your computer and the handheld computer cradle.  
Your Janam XP20 cannot share this port with an internal modem or  
other device.  
5. Set the speed if necessary.  
6. Select as fast as possible rate first.  
7. Click the modem tab to adjust options as needed.  
8. Click the network tab if you are attached to a network to display  
the network settings and adjust the options as needed.  
9. Click OK.  
Janam Technologies LLC  
12-2  
XP20 User Manual  
Customize HotSync application settings  
For each application, you can define a set of options that determines how records are handled during  
synchronization. These options are called a “conduit.” By default, a HotSync operation synchronizes all  
files between the handheld computer and Palm Desktop.  
To customize HotSync application settings:  
1. Click the HotSync icon in the Windows system tray (bottom right  
corner of the taskbar).  
TIP: You can also tap the HotSync command on the Palm Desktop  
menu bar.  
2. Choose custom from the HotSync Manager menu.  
3. Select the appropriate user name from the list.  
4. Select an application in the conduit list and tap change.  
5. Select the direction in which you want to write data, or select do  
nothing to skip data transfer for an application.  
6. Choose how long the setting will remain in effect:  
To have the setting affect only the next HotSync operation,  
deselect set as default. Thereafter, the HotSync Actions revert  
to their default settings.  
To use a new setting as the default, select the set as default  
option. Thereafter, whatever you selected as the default setting is used when you tap the default  
button in the custom dialog.  
7. Tap OK.  
8. Repeat steps 4 through 7 to change conduit settings for other applications.  
9. Click done to activate your settings.  
IR HotSync operations  
Your organizer is equipped with an infrared (IR) port that supports the IrCOMM implementation of the  
standards for infrared communication established by the Infrared Data Association (IrDA). This means  
that you can beam data to any other device that supports the IrCOMM implementation of the IrDA  
standards. Most importantly, you can use the IR port to perform HotSync operations. You don’t need a  
cradle to do this.  
To prepare your computer for infrared communication:  
Before you can perform a HotSync operation using the IR port, the computer you want to synchronize with  
must meet the following requirements:  
The computer must support the IrCOMM implementation of the IrDA standards.  
The computer must have an enabled infrared port built-in, or an enabled infrared device attached to  
the computer.  
Desktop computers are likely to require an infrared device attached to a physical serial port. Laptops are  
likely to have a built-in IR port. Your computer must also have an installed infrared driver.  
To check if your Windows 95 computer supports infrared communication:  
1. Click start in the Windows taskbar.  
2. Choose settings > control panel.  
3. Find the infrared icon in the control panel.  
If the icon is there, your computer is enabled for infrared communication. If it isn’t there, you need to  
install an infrared driver. After you install the infrared driver or determine that the infrared driver is  
already installed, check the ports used by your computer for infrared communication.  
Janam Technologies LLC  
12-3  
XP20 User Manual  
To determine the ports used for infrared communication (Windows only):  
1. Choose settings > control panel > start.  
2. Double-click infrared.  
3. Click the options tab.  
4. Select enable infrared communication.  
Note: The COM port displayed in the drop-down box is the port where your infrared device is attached. It  
should be different from any port used by the HotSync manager.  
5. Make a note of which port is listed as “providing application support.”  
Note: You need this information to configure the HotSync manager for infrared communication. This  
port is the simulated port. It is the channel through which the actual infrared communication takes  
place between your computer and your handheld computer.  
6. Deselect all other check boxes in the options tab.  
7. Click apply > OK.  
To configure HotSync manager for infrared communication on Windows:  
1. Click the HotSync manager icon in the Windows system tray.  
2. Select local on the menu.  
3. Choose setup.  
4. Click the local tab.  
5. Select the COM port in the serial port drop-down box that was given as the simulated port in the  
options tab of the infrared monitor.  
6. Click OK.  
To perform an IR HotSync operation:  
1. Tap the HotSync icon in the applications launcher.  
2. Tap local.  
3. Tap the pick list below the HotSync icon and select IR to a PC/handheld.  
4. Position the IR port of your organizer within a couple of inches of the infrared port of your computer.  
5. Tap the HotSync icon to start the IR HotSync operation.  
To return to cradle HotSync operations on Windows:  
1. Connect the cradle to a serial (COM) port on your computer if necessary.  
2. Click the HotSync Manager icon in the Windows system tray.  
3. Choose setup > local.  
4. Select the COM port where your cradle is connected.  
5. Click OK.  
Conduct a HotSync operation via modem  
You can use a modem to synchronize your handheld computer, but you should follow your modem  
manufacturer’s guidelines for use.  
Conduct a HotSync operation via a network  
When you use the network HotSync software, you can take advantage of the LAN and WAN connectivity  
available in many office environments. The network HotSync software lets you perform a HotSync  
operation by dialing in to a network or by using a cradle that is connected to any computer on your LAN or  
WAN (provided that the computer connected to the cradle also has the network HotSync software  
installed, your computer is on, and the HotSync Manager is running).  
The network HotSync software requires the following:  
Your computer has TCP/IP support installed.  
Both your company’s network system and its remote access server support TCP/IP. (Your system  
administrator has this information.)  
You have a remote access account. (If you don’t have an account, consult your system administrator.)  
Janam Technologies LLC  
12-4  
XP20 User Manual  
To prepare your computer for a network HotSync operation:  
1. Click the HotSync Manager icon in the Windows system tray.  
The Windows system tray is usually in the lower right corner on your  
computer display. The location may vary depending on the location of the  
taskbar and the version of Windows you are using.  
2. Choose network from the HotSync Manager menu.  
3. Choose setup from the HotSync Manager menu.  
4. Click the network tab and make sure that a check mark appears next to your  
user name. If no check mark appears, select the check box next to your user  
name.  
5. Click OK.  
6. Place your handheld computer in the cradle, and perform a HotSync  
operation.  
The HotSync operation records network information about your computer on  
your handheld computer. With this information, your handheld computer can locate your computer  
when you perform a HotSync operation over the network.  
To prepare your device for a network HotSync operation:  
1. Tap the applications icon.  
2. Tap the HotSync icon.  
3. Tap the menu icon.  
4. Tap options, and then tap modem sync prefs.  
5. Tap network.  
6. Tap OK.  
Conduct a HotSync operation via wireless local area network (WLAN)  
In order to perform a HotSync operation through a wireless area network, you’ll need to find out your  
primary PCs IP address first.  
To find out the primary PCs IP address:  
1. Start > run > CMD > OK on your primary PC.  
2. Type Ipconfig > enter at the prompt.  
3. Write down the IP address assigned.  
NOTE: You can choose to perform a hard reset of your Janam XP20, but you will have to perform  
calibration and settings again before beginning HotSync.  
Janam Technologies LLC  
12-5  
XP20 User Manual  
To start HotSync on your handheld computer:  
1. Tap HotSync icon.  
2. Tap modem (not local) in Hotsync menu bar.  
3. Tap preferences button and modem sync preference.  
4. Select network > OK.  
5. Tap Hotsync menu bar again and LANSync prefs.  
6. Select LANSync > OK.  
7. Tap Hotsync menu bar again and primary PC setup.  
In primary PC name, input !! (two exclamation points). Graffiti is a downstroke, then tap a period.  
This enables the two computers to sync together.  
Input TCP/IP address for your computer in primary PC address.  
Leave subnet blank.  
8. On Hotsync screen, select modem.  
9. Tap select service.  
Preferences screen pops up with Service: WLAN (the only selection).  
10. Tap details.  
Select a network will come up and scan for available networks.  
11. Choose the same network name your PC is connected to.  
12. If the network is open, tap connect > go to step 19.  
If secure, tap edit > configure.  
13. Choose security personal.  
14. Choose WPA-PSK or WEP.  
15. Enter key or pass-phrase, depending on the security methodology you use.  
16. Tap OK.  
Dialog box pops up: “Would you like to connect to [NETWORK ESSID NAME] now?”  
17. Tap yes.  
WLAN initializes and connects.  
Preferences screen reappears.  
18. Tap home key.  
19. Choose Hotsync.  
Modem should be highlighted  
20. Tap select service again.  
Service: WLAN comes up  
21. Tap done.  
22. Tap Hotsync icon in center of screen.  
First HOTSYNC only:  
-
XP will associate.  
-
Hotsync will start on PC.  
23. Choose name of XP20 or assign a new one.  
Hotsync finishes.  
Use file link  
The file link feature lets you import address book and memo pad information into your handheld computer  
from a separate external file such as a company phone list. You can set the file link feature to check for  
changes to the external file when you perform a HotSync operation. With file link, you can import data  
stored in any of the following file formats:  
Comma delimited (.csv).  
Tab delimited (.tsv).  
Memo pad archive (.mpa).  
Address book archive (.aba).  
Text (.txt).  
For information on how to set up a file link, see the Palm Desktop online help.  
Janam Technologies LLC  
12-6  
XP20 User Manual  
13  
Regulatory and Maintenance  
Regulatory and safety approvals  
The CE mark on the product indicates that the system has been tested to and conforms with the  
provisions noted within the 89/336/EEC Electromagnetic Compatibility Directive.  
For further information, please contact: Janam Technologies; 100 Crossways Park West, Suite 105,  
Woodbury, NY 11797.  
Janam Technologies shall not be liable for use of our product with equipment (i.e., power supplies,  
personal computers, etc.) that is not CE marked and does not comply with the Low Voltage Directive.  
FCC and Canadian compliance  
XP Series mobile computers meet or exceed all applicable standards and have been manufactured to the  
highest level of quality. To see the specific labels associated with RF terminals configurations, visit  
www.janam.com. Warning: Changes or modifications to this unit not expressly approved by the party  
responsible for compliance could void the user authority to operate the equipment.  
XP Series batch terminal  
Regulatory and safety approvals  
Parameter  
Specification  
U.S.A.  
FCC Part 15 Subpart B  
Canada  
European Community  
ICES-003 Issue 4  
EN55022:1998+A1: 2000+A2:2003  
EN55024:1998+A1: 2000+A2:2003  
AS/NZS CISPR 22:2004  
Australia  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
(1) this device may not cause harmful interference; and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
This Class B digital apparatus complies with the Canadian ICES-003.  
Cet appareil numerique de la Class B est conforme a la norm NMB-003 du Canada.  
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)  
this device must accept any interference, including interference that may cause undesired operation of the  
device.  
L’utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes : (1) il ne doit pas  
produire de brouillage, et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage  
radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du  
dispositif.  
Janam Technologies LLC  
13-1  
XP20 User Manual  
XP Series RF Terminals with 802.11b and/or Bluetooth  
RF, regulatory and safety approvals  
Parameter  
RF approvals  
U.S.A.  
Specification  
FCC Part 15 Subpart C and Subpart B  
RSS 210 Issue 6  
Canada  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
(1) this device may not cause harmful interference; and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant  
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference  
to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more  
of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
If necessary, the user should consult the dealer or an experienced radio/television technician for additional  
suggestions. The user may find the following booklet helpful: “Something about Interference.” This is  
available at local FCC regional offices. Janam is not responsible for any radio or television interference  
caused by unauthorized modifications of this equipment or the substitution or attachment of connective  
cables and equipment other than those specified by our company. The correction is the responsibility of  
the user. Use only shielded data cables with this system.  
This device and its antenna must not be co-located or operating in conjunction with any other  
antenna or transmitter. To maintain compliance with the FCC RF exposure guidelines for body-  
worn operation, do not use accessories that contain metallic components other than what is  
specified by the manufacturer.  
This Class B digital apparatus complies with the Canadian ICES-003.  
Cet appareil numerique de la Class B est conforme a la norm NMB-003 du Canada.  
Operation is subject to the following two conditions: (1) this device may not cause interference, and  
(2) this device must accept any interference, including interference that may cause undesired  
operation of the device.  
L’utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes : (1) il ne doit pas  
produire de brouillage, et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage  
radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du  
dispositif.  
To prevent radio interference to the licensed service, this device is intended to be operated indoors and  
away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed  
outdoors is subject to licensing.  
Janam Technologies LLC  
13-2  
XP20 User Manual  
RF, regulatory and safety approvals  
Parameter  
Specification  
R&TTE  
EN 300 328 v1.6.1 (2004-11)  
EN 301 489-1 v1.6.1 (2005-09)  
EN 301 489-17 v1.2.1 (2002-08)  
EN 60950-1:2001+A11  
EN 50371:2002  
Australia  
AS/NZS CISPR 22:2004  
This product is marked with  
in accordance with the Class II product requirements specified in the  
R&TTE Directive, 1005/5/EC. The equipment is intended for use throughout the European Community. Its  
authorization for use in France is restricted as follows.  
PAN European Frequency Range: 2.402-2.480 GHz  
Restrictions in France:  
Indoor use:  
Outdoor use:  
Maximum power (EIRP*) of 100 mW for the 2400-2483.5 MHz band.  
Maximum power (EIRP*) of 100 mW for the 2400-2454 MHz band and maximum  
power (EIRP*) of 10 mW for the 2454-2483 MHz band.  
Pacemakers, hearing aids and other electrically powered devices  
Most manufacturers of medical devices adhere to the IEC 601-1-2 standard. This standard requires  
devices to operate properly in an EM Field with strength of 3V/m over a frequency range of 26 to  
1000MHz.  
The maximum allowable field strength emitted by the XP20 is 0.3V/m according to Subpart B of Part 1 of  
the FCC rules. Therefore, the XP Series has no effect on medical devices that meet the IEC specification.  
Microwaves. The radio in the XP Series terminal operates on the same frequency band as a microwave  
oven. Therefore, if you use a microwave within range of the XP20 you may notice performance  
degradation in your wireless network. However, both your microwave and your wireless network will  
continue to function. The XP Series batch devices do not contain a radio, and therefore, are not affected  
by microwave ovens.  
Care and cleaning of terminals  
When needed, clean the image engine window and the LCD display with a clean, non-abrasive, lint-free  
cloth. The terminal can be cleaned with a damp cloth.  
For European Community users  
Janam Technologies complies with Directive 2002/69/EC of THE EUROPEAN PARLIAMENT AND OF THE  
COUNCIL OF 27 January 2003 on waste electrical and electronic equipment (WEEE).  
Waste electrical and electronic equipment (WEEE) information  
This product has required the extraction and use of natural resources for its production. It may contain  
hazardous substances that could impact health and the environment if not properly disposed.  
In order to avoid the dissemination of those substances in our environment and to diminish the pressure  
on the natural resources, we encourage you to use the appropriate take-back systems for product  
disposal. Those systems will reuse or recycle most of the materials of the product you are disposing in a  
sound way.  
Janam Technologies LLC  
13-3  
XP20 User Manual  
The crossed out wheeled bin symbol informs you that the product should not be disposed of  
along with municipal waste and invites you to use the appropriate separate take-back systems  
for product disposal.  
If you need more information on the collection, reuse and recycling of these systems, please contact your  
local region’s waste administration. You may also contact your supplier for more information on the  
environmental performances of this product.  
Battery Warning  
CAUTION  
RISK OF EXPLOSION IF BATTERY IS REPLACED  
BY AN INCORRECT TYPE.  
DISPOSE OF USED BATTERIES ACCORDING  
TO THE INSTRUCTIONS  
Use only Janam approved batteries such as the BA-XP-1 and recharge batteries using only Janam approved  
chargers. Use only easily accessible wall outlets that are easily reached with the length of the supplied power  
cables.  
The standard charger provides an easy and convenient way to charge the device. You can purchase the  
charger through an authorized dealer. Visit Janam’s website www.janam.com for information.  
The socket-outlet shall be installed near the equipment and shall be easily accessible.  
GENERAL INFORMATION  
1. Before using the standard charger, read all instructions and warnings.  
2. Please retain this instruction for future reference.  
WARNING  
1. No user serviceable parts inside. Do not open the charger. The charger is not serviceable.  
2. If found any damage or cracking on the enclosure of the charger, do not use the charger. This charger  
shall be disposed of.  
3. Do not short-circuit the output terminals of the charger.  
4. The charger is for indoor use only. Do not expose the charger to moisture or place the charger at location  
which could subject to water spillage.  
5. The standard charger is designed for use with this barcode scanner only. Do not use this charger for  
other purpose.  
OPERATING INSTRUCTION  
1. Insert the output plug of the standard charger to the barcode scanner before plug in the charger into ac  
power socket outlet.  
2. Always unplug the standard charger from the socket outlet after use.  
3. Ensure that your local power supply system complies with the technical data of the standard  
charger.  
Janam Technologies LLC  
13-4  

Mr Coffee D40 User Manual
Magic Chef MCCM1TB12 User Manual
Hamilton Beach 45238C User Manual
Grindmaster BL 3PW User Manual
GE PDW8600 User Manual
Connect Tech 104 User Manual
COBY electronic CRA59 User Manual
Clarion BD169R User Manual
Bunn Coffeemaker IC2B User Manual
Avaya Cell Phone 2410 User Manual