JVC XL FV323TN User Manual

VIDEO CD PLAYER  
XL-FV323TN  
RM-SXFV555U  
VCD  
TV  
/
/
ON SCREEN  
TV MUTE  
RANDOM  
REPEAT  
DISC  
DISC  
1
1
4
DISC  
DISC  
2
2
DISC  
3
5
DISC SKIP EXCHANGE  
3
7
4
8
5
6
XL-FV323 VIDEO CD PLAYER  
PBC ON/OFF  
PREV  
NEXT  
STILL  
SELECT  
MPX  
PROGRAM  
DISC SKIP  
EXCHANGE  
MPX  
V.REPLACE  
9
10  
+10  
DISC  
SLOW  
/
1
2
3
4
5
SELECT  
STANDBY/ON  
VIDEO  
INTRO  
RETURN  
HIGHLIGHT B.DIGEST  
B.MARK  
B.SEARCH  
TV CH  
MIC  
MIC  
1
2
5
DISC  
VIDEO CD  
PLAY & EXCHANGE SYSTEM  
PROGRAM  
CANCEL  
TV CH  
TV VOL  
MIC  
1
MIC  
2
DIGITAL ECHO  
KEY CONTROL  
DOWN NORMAL  
BOOK  
SEARCH MARK  
TV/VIDEO  
SHIFT  
1
6
2
7
3
8
4
9
5
UP  
OPEN/CLOSE  
TV VOL  
10  
+10  
MIN  
MAX  
MIN  
MAX  
MIN  
MAX  
KEY CONTROL  
MULTI BRAND REMOTE CONTROL  
COMPACT  
'
PlayBack  
Control  
'
GRAPHICS  
DIGITAL VIDEO  
For Customer Use:  
Enter below the Model No. and Serial No.  
which are located either on the rear, bottom or  
side of the cabinet. Retain this information for  
future reference.  
INSTRUCTIONS  
Model No.  
Serial No.  
LVT0126-001A  
[U, US, UF]  
IMPORTANT FOR LASER PRODUCTS / IMPORTANTE PARA PRODUCTOS LÁSER / IMPOTANTE  
PARA PRODUTOS LASER /  
/
REPRODUCTION OF LABELS / REPRODUCCIÓN DE ETIQUETAS / REPRODUÇÃO DE ETIQUETAS  
/ /  
1
1
1
CLASSIFICATION LABEL, PLACED ON REAR ENCLO-  
SURE  
2
2
2
WARNING LABEL, PLACED INSIDE THE UNIT  
ETIQUETA DE CLASIFICACIÓN, PEGADA EN LA PARTE  
POSTERIOR DE LA CAJA  
ETIQUETA DE ADVERTENCIA, PEGADA EN EL INTE-  
RIOR DE LA UNIDAD  
ETIQUETADECLASSIFICAÇÃOLOCALIZADANAPARTE  
POSTERIOR DA CAIXA DO APARELHO.  
ETIQUETA DE ADVERTÊNCIA LOCALIZADA NA PARTE  
INTERNA DA UNIDADE.  
DANGER: Invisible laser  
radiation when open and  
interlock failed or defeated.  
AVOID DIRECT EXPOSURE  
VARNING: Osynlig laser-  
strålning när denna del är  
öppnad och spärren är  
CLASS  
LASER  
1
urkopplad.  
strålen.  
Betrakta  
ej  
(s)  
PRODUCT  
TO BEAM.  
(e)  
ADVARSEL: Usynlig laser-  
stråling ved åbning, når  
sikkerhedsafbrydere er ude  
af funktion. Undgå udsæt-  
VARO: Avattaessa ja suo-  
jalukitus ohitettaessa olet  
alttiina  
lasersäteilylle. Älä katso  
säteeseen. (f)  
näkymättömälle  
telse for stråling  
(d)  
1. CLASS 1 LASER PRODUCT  
2. DANGER: Invisible laser radiation when open and interlock  
failed or defeated. Avoid direct exposure to beam.  
3. CAUTION: Do not open the top cover. There are no user  
serviceable parts inside the Unit; leave all servicing to quali-  
fied service personnel.  
1. PRODUCTO LÁSER CLASE 1  
2. PELIGRO: En el interior hay radiación láser invisible. Evite el  
contacto directo con el haz.  
3. PRECAUCIÓN: No abra la tapa superior. En el interior de la  
unidad no existen piezas reparables por el usuario; deje todo  
servicio técnico en manos de personal calificado.  
1. PRODUTO LASER CLASSE 1  
2. PERIGO:Olaseremiteumarediaçãoinvisívelqueéperigosa,  
caso o aparelho esteja aberto e a trava inoperante ou  
danificada. Evite exposição direta ao feixe dos raios.  
3. CUIDADO: Não abra a caixa do aparelho. Não existem  
peças reparáveis pelo usuário na parte interna da unidade.  
Solicite assistência técnica somente a pessoal técnico  
qualificado.  
G-2  
GENERAL INFORMATION  
Care and handling of  
compact discs  
How to handle CDs  
Which compact discs can be used?  
When handling a compact disc, do not touch the surface of the disc  
(reflective silver side –– the side without the label).  
Since compact discs are made of plastic, they are easily damaged. If  
a disc gets dirty, dusty, scratched or warped, the sound will not be  
picked up correctly and, in addition, such a disc may cause the CD  
player to malfunction.  
Many types of compact discs are sold for a variety of uses. The Video  
CD Player can play the following compact discs:  
COMPACT  
Video CD  
for audio and video (moving picture) reproduction,  
including multiplex sound.  
DIGITAL VIDEO  
PlayBack  
Control  
Video CD with Playback Control function  
featuring menu-type operation and super-fine still  
pictures for audio and video (moving picture) re-  
production, including multiplex sound.  
CD Graphics (CD-G)  
for audio and video (still picture) reproduction,  
including multiplex sound.  
'
GRAPHICS  
Digital Audio CD  
Care of the label side  
including single discs  
for audio reproduction.  
Do not damage the label side, stick paper or use any adhesive on its  
surface.  
'
CDs you can't play back  
Storage  
Do not play back CD-ROMs, DVDs, or CD-Is on this equipment. Doing  
so may generate a noise which can damage your speakers.  
Make sure that discs are kept in their cases. If discs are piled one on  
topofanotherwithouttheirprotectivecases,theycanbedamaged. Do  
notputdiscsinalocationwheretheymaybeexposedtodirectsunlight,  
or in a place where the humidity or temperature is high. Avoid leaving  
discs in your car!  
Using the remote control  
The remote control is ready to use when its batteries are installed  
properly.  
Maintenance of discs  
If there are fingerprints or dirt adhering to a disc, wipe it with a soft dry  
cloth, moving from the center outwards.  
If a disc is difficult to clean, wipe with a cloth moistened with water.  
Never use record cleaners, petrol, alcohol or any anti-static agents.  
To use it, point its infrared light-emitting window toward the display  
window of the player and press a button. The operating range of the  
remote control is up to about seven meters in front of the player and  
within about 30 degrees to each side –– with nothing between the  
remote control and the player interrupting the beam path.  
If pressing a button on the remote control does not produce any  
response, check to make sure it is pointed correctly and try again. If it  
still does not function, check the batteries.  
CAUTION  
Sometimes during play noise or images may be garbled. This is  
sometimes due to the disc. (It may not be up to industry standards.)  
These symptom are caused by the discs, not by the malfunction of  
the Player.  
Page 1  
BEFORE USING FOR THE FIRST TIME  
Basic connections  
The Video CD Player must be connected directly to a television set or  
an amplifier that is connected to a television or monitor. The television  
set or the amplifier must have audio input jacks for right and left  
channels and a video input jack.  
Select a level, dry location free of dust and vibration, having a  
temperature maintained between 5 and 35°C (41 and 95°F).  
Video out select  
Set the VIDEO OUT SELECT switch on the rear panel to NTSC, PAL,  
or PAL AUTO mode according to your television system.  
NTSC .................... for NTSC exclusive TV  
PAL ....................... for PAL exclusive TV  
PAL AUTO ............ for Multisystem TV  
PALAUTOdetectstheformulaofthedisc(NTSC/  
PAL) automatically and plays the image on the  
screen correctly.  
Connecting the player to a TV or amplifier  
using the Audio Video cord  
First connect the Audio Video cord — before connecting the AC power  
cord.  
Firmly insert the yellow pin plug of the Audio Video cord in the yellow  
VIDEO OUT jack on the rear panel of the player; the red pin plug in the  
red AUDIO OUT (RIGHT) jack; and the white pin plug in the white  
AUDIO OUT (LEFT) jack. (The RIGHT and LEFT output jacks are for  
the right and left audio channels.)  
Then make sure that the television, amplifier or receiver is turned off,  
disconnect the AC power cord, and firmly insert the pin plugs at the  
other end of the Audio Video cord into the matching video and audio  
INPUT jacks.  
VIDEO OUT SELECT  
PAL  
NTSC  
PAL AUTO  
AC POWER CORD  
Notes  
VIDEO OUT  
When you play an NTSC disc in PAL AUTO mode on a PAL  
exclusive TV, the image may be distorted.  
If the signal doesn’t synchronize, change the mode to “PAL”.  
Select the mode before you play the disc. If you change the mode  
during play, images may get distorted. In this situation stop the  
player and reset the mode.  
WhenyouplayanNTSCdiscinPALAUTOmodeonaMultisystem  
TV, the image may blink for a moment. This symptom is caused by  
the Player detecting the formula of the disc, not by a malfunction of  
the Player.  
AUDIO OUT  
RIGHT  
LEFT  
Audio Video cord (supplied)  
(Yellow)  
(Red) (White)  
To input audio jack of  
the television/amplifier/  
receiver  
To input video jack of  
the television/amplifier/  
receiver  
Page 2  
BEFORE USING FOR THE FIRST TIME  
Installing batteries  
Connecting the power cord  
Putting batteries in the remote control unit  
The battery compartment is located on the back of the remote control  
unit.  
IMPORTANT (not applicable for China)  
Check the setting of the *LINE VOLTS switch on the rear panel of  
the player.  
1. Press down on the triangular mark of the compartment cover,  
and slide the cover off to open the compartment.  
Change the setting if the switch is not set for the main voltage  
supplied to your home.  
After the audio-video connectors had been connected, insert the  
female end of the power cord firmly into the AC POWER CORD  
socket loceted on the rear panel of the player. Then insert the male  
end of the power cord into the wall outlet.  
When the power cord is connected, the STANDBY indicator on the  
left-hand side of the player’s front panel comes on. [See “overview  
of Controls” for a description of the controls on the player.]  
2. Place the two accessory R6P(SUM-3)/AA(15F) batteries in the  
remote control unit according to the polarity markings (“+”  
and “–”) inside the compartment and on the batteries.  
LINE VOLTS  
220V-240V  
115V-127V  
AC POWER CORD  
VIDEO OUT  
AUDIO OUT  
RIGHT LEFT  
AC power cord  
3. Placethecoveroverthecompartment,pressdownlightly,and  
push it upward until it snaps on.  
Wall outlet  
The batteries last about one year with normal use. If function of the  
remote control become erratic, replace the batteries.  
Precautions for the safe use of batteries  
Observe the following precautions for the safe use of batteries. Their  
life will be shortened, they may burst or their contents may leak if they  
are used improperly.  
Removebatteriesfromtheremotecontrolifitisnotgoingtobeused  
for a long period of time.  
Remove dead batteries and dispose of them properly.  
Never leave dead batteries lying around, take them apart, mix them  
with other refuse, or throw them into an incinerator.  
Never touch liquid that has leaked out of a battery.  
Do not mix new and old batteries, or batteries of different types,  
when replacing them.  
Page 3  
OVERVIEW OF CONTROLS  
The following is an explanation of the the basic function of controls  
on the front panel of the Player and the remote control. The function  
of some controls may be restricted in actual use depending on the  
on-going operations. The remote control has fifteen (15) unique  
function buttons in addition to those on the player.  
XL-FV323 VIDEO CD PLAYER  
PBC ON/OFF  
MPX  
PROGRAM  
DISC SKIP  
EXCHANGE  
8
9
2
3
4
5
6
1
DISC  
/
7
1
2
3
4
5
STANDBY/ON  
10  
MIC 1  
MIC 2  
VIDEO CD  
MIC 2  
MIC 1  
DIGITAL ECHO  
KEY CONTROL  
DOWN NORMAL  
BOOK  
11  
1
6
UP  
SEARCH  
MARK  
21  
MIN  
MAX  
MIN  
MAX  
MIN  
MAX  
14  
15  
16  
12  
13  
Front panel  
(Controls marked (R) have equivalents on the remote control.)  
14  
KEY CONTROL buttons (R)  
Transposes the music key.  
DOWN button: used to flatten by a half tone.  
NORMAL button: returns to original key tone.  
/
1
button (R)  
Turns the power on and off.  
PBC ON/OFF button  
2
UP # button:  
used to sharpen by a half tone.  
Selects On or Off of the Playback Control function of the video CD.  
MPX button (R)  
Activates the multiplex function, which switches to NORMAL  
(stereo), L-ch monaural and R-ch monaural.  
PROGRAM button (R)  
Any desired sequence of tracks can be programmed with the  
number keys and the +10 button.  
The program button cannot be used while the Playback Control  
function is activated.  
DISC SKIP button  
Switches the selected disc from 1 to 5, then back to 1.  
EXCHANGE button  
Opens the disc tray to change the discs which are not being played  
back.  
DISC buttons (R)  
To select a disc, press the desired disc number (1-5). The unit  
searches for the selected disc and playback starts automatically.  
Display window  
Shows information about the status of operation.  
STANDBY indicator (Red)  
Lights when the power cord is connected and the power is turned  
off. The STANDBY indicator is not lit when the player is turned on.  
DISC1 to DISC5 trays (R)  
Used to load discs. To insert/remove one or up to 5 discs.  
MIC jacks (1, 2)  
Used for connecting microphones (1, 2). The jacks correspond to  
MIC 1 to 2 volume knobs.  
MIC1, MIC2 knobs  
Adjusts volume of the microphone corresponding to MIC number.  
DIGITAL ECHO knob  
Adjusts the degree of the echo effect for the microphone (1, 2)  
voice.  
15 BOOK SEARCH button (R)  
3
4
Retrieves video segments which you marked with a bookmark.  
(See page 14.)  
BOOK MARK button (R)  
Places a “bookmark” at video segments you want to find later for  
almost instant replay. (See page 14.)  
16  
17  
4 / ¢ PREV / NEXT buttons (R)  
During operation with the Playback Control function  
Invokes previous or next screen.  
5
6
During operation without the Playback Control function  
Skipsforwardorbackwardquicklyfromcurrenttrackbeingplayed.  
7 (STOP) button (R)  
18  
19  
Stops play.  
8 STILL (PAUSE) button (R)  
7
Temporarily suspends playing. Video motion freezes and audio  
reproduction stops. Pressing the button repeatedly advances the  
picture frame-by-frame. (Video CD only)  
8
9
3 SELECT (PLAY) button (R)  
20  
21  
Starts to play the disc.  
Number keys (1 to 10, +10) (R)  
Used to specify a track number for playing, changing, or program-  
ming. To operate numbers above ten (10), press the +10 button  
once. The number keys (1 to 10) are then assigned the numbers  
11 to 20 instead of 1 to 10. The maximum key number assignment  
is 99. In PBC function operation, the number keys are additionally  
utilized for the selection of menu items. See page 17 “Operation of  
Playback Control function”.  
RETURN button (R)  
Utilized for operation with the PBC function. This button is used to  
return to a menu screen during play.  
10  
11  
12  
13  
22  
23  
0 OPEN/CLOSE buttons  
Usedthe0(OPEN/CLOSE)buttontoopenandclosethedisctray.  
Page 4  
OVERVIEW OF CONTROLS  
The controls with identical names on the Player and on the remote  
control have the same function and are used in the same manner.  
RM-SXFV555U  
VCD  
TV  
/
/
ON SCREEN  
TV MUTE  
RANDOM  
REPEAT  
24  
26  
25  
27  
DISC 1 DISC 2 DISC 3  
DISC SKIP EXCHANGE  
DISC 4 DISC 5  
17  
18  
19  
20  
1
5
2
6
3
7
4
8
PREV  
NEXT  
STILL  
SELECT  
MPX  
V.REPLACE  
9
10  
+10  
28  
30  
SLOW  
29  
RETURN  
SELECT  
DISC  
5
PLAY & EXCHANGE SYSTEM  
22  
2
7
3
8
4
9
5
30  
31  
OPEN/CLOSE  
VIDEO  
INTRO  
HIGHLIGHT B.DIGEST  
B.MARK  
B.SEARCH  
TV CH  
10  
+10  
23  
32  
34  
33  
35  
PROGRAM  
CANCEL  
TV CH  
TV VOL  
TV/VIDEO  
SHIFT  
36  
38  
37  
39  
TV VOL  
39  
35  
KEY CONTROL  
MULTI BRAND REMOTE CONTROL  
Remote control unit  
31 VIDEO INTRO button  
Applies to video CDs only. The introductory five (5) seconds of  
tracksonavideoCDaredisplayedonthetelevisionscreeninorder  
to present the contents of the video CD.  
HIGHLIGHT button  
Applies to a video CD to see highlights of a track. Displays the first  
(5) seconds of each of nine (9) equal-time segments of the track.  
B. DIGEST button  
Displays video segments you marked with the Bookmark function.  
(See page 14.)  
CANCEL button  
RANDOM button  
24  
Changes the disc track program to a random sequence from disc  
1 through 5 respectively.  
32  
33  
34  
25  
REPEAT button  
Repeats a track or inserted discs from 1 to 5.  
/
/
26 VCD  
/TV  
button  
Turns the player on and off.  
When pressed after you hold down the SHIFT button, turns the TV  
on or off.  
27 ON SCREEN/TV MUTE button  
Cancels the latest track you have programmed. The latest pro-  
grammed track is canceled whenever you press this button. Also  
used to cancel a bookmark.  
TV VOL + / TV VOL – keys  
Turns the TV volume up or down.  
Controls whether or not control and operation status are displayed  
on the television screen or monitor.  
When pressed after you hold down the SHIFT button, mutes or de-  
mutes the TV sound.  
MPX/V.REPLACE button  
35  
36  
28  
TV/VIDEO button  
Activates the multiplex function. (See page 12)  
WhenpressedafteryouholddowntheSHIFTbutton, activatesthe  
vocal replace function, inserting your voice in place of the disc  
vocals.  
Used to preset the remote control unit, to control some functions  
on your TV set. (See page 9.)  
TV PROG – / TV PROG +  
Changes the television channel.  
SHIFT button  
37  
38  
29 SLOW button  
Starts slow-motion playback.  
Used together with other keys for various functions. (See page 9)  
39 KEY CONTROL  
1 / ¡ button  
30  
Shifts the playing location backward and forward quickly. Holding  
down the button causes it to go much faster.  
Changes the key in which the music plays. (See page 16.)  
Page 5  
BASIC OPERATIONS  
Now you can play a  
variety of video CDs!!  
Display window  
Loading discs in the disc tray  
The display window indicates many aspects of control and operation  
status.  
Use the 0 OPEN/CLOSE (or 0 on the remote control) button to  
open and close the disc tray.  
4
OPEN/CLOSE  
or  
(Remote control)  
1. Open the disc tray by pressing the 0 (OPEN/CLOSE) button.  
1
2
5
3
2. Place discs on the disc tray according to the groove with their  
label side up.  
1
Shows the disc number being played.  
Showsmainlythetotalnumberoftracksandthetracknumberbeing  
played.  
Shows mainly the cumulative time (minutes and seconds) of the  
track. Afterward, total time of the disc is displayed.  
The combination of VCD, PBC, and CD-G indicators shows the  
type of disc being played.  
Each indicator in this area lights when the corresponding function  
is activated.  
• To turn the disc tray press DISC SKIP button.  
2
3. Close the disc tray by pressing the 0 (OPEN/CLOSE) button.  
3
4
5
CAUTION  
When loading discs in the disc tray, be sure to put the discs  
according to the groove. Otherwise, the discs will be damaged  
when the disc tray is closed, and cannot be removed from the unit.  
Preparation for playing  
Starting to play disc(s)  
Turnonthetelevisionset,amplifierorreceivertowhichthePlayer  
is connected. Then select the proper channel and mode to  
operate the Player.  
Pressthe3SELECT(PLAY)button. ThePlayerstartstoplayfrom  
the disc indicated in the display window.  
For individual track selection, use the number keys or the 4/  
¢ PREV/NEXT buttons.  
CAUTION  
SELECT  
Set the sound volume of the television set, amplifier or receiver to  
which the Player is connected to a reasonable level before starting  
playback.  
or  
SELECT  
/
/
/
Press the  
button on the front panel or the VCD  
(TV  
)
button on remote control. The STANDBY indicator goes out.  
(Remote control)  
VCD  
TV  
/
/
/
When you start play, the Display window shows the disc number and  
the track number being played.  
or  
STANBY/ON  
If the PBC function is activated, the display window shows “Pb”.  
When you press 3 SELECT button during play, the disc will restart  
from the beginning of the track except when the PBC function is  
activated.  
(Remote control)  
The display window shows the initial information as shown below.  
Page 6  
BASIC OPERATIONS  
Specifying a desired disc  
While the player is in play or stop mode:  
Use the DISC buttons (1-5).  
Main unit  
Stopping play  
Press the 7 (STOP) button to stop play at any time.  
or  
Remote control unit  
DISC 1 DISC 2 DISC 3  
(Remote control)  
DISC  
DISC 4 DISC 5  
1
2
3
4
5
Pausing play  
Press the 8 STILL (PAUSE) button to temporarily suspend play.  
STILL  
Toselectadisc,pressthedesireddiscnumber(1-5).Theunitsearches  
for the selected disc and playback starts automatically.  
or  
(Remote control)  
Using track number keys  
Whenthe8 STILL(PAUSE)buttonispressedonce,PAUSEappears  
on the television screen, the video motion freezes and the sound is  
turned off. The still picture advances frame-by-frame each time the 8  
STILL (PAUSE) button is pressed. This frame-by-frame function is  
effective only for video CDs.  
Press the number keys to select track numbers.  
On the Player .................... 1 to 10 and +10 key  
Example:Fortracknumber5,press5. Fortracknumber15,press+10,  
then 5. For track number 20, press +10 button, then 10. For track  
number 32, press +10 three times, then 2.  
To release the pause, press the 3 SELECT button.  
During “PAUSE” the time counter on the display will blink.  
1
2
3
4
5
6
7
8
9
10  
+10  
Skipping to a desired disc  
Use the DISC SKIP button.  
DISC SKIP  
DISC SKIP  
On the remote control ..... 1 to 10 and +10 key  
Select track numbers as described above.  
or  
1
5
9
2
6
3
7
4
8
(Remote control)  
Each time the DISC SKIP button is pressed, the selected disc number  
changes.  
10  
+10  
Note  
Whenyoupressthenumberkeys, thetrackwillstartplayingwithout  
pressing 3 SELECT button.  
Page 7  
BASIC OPERATIONS  
Changing discs during  
playback  
During playback of a disc, you can change other discs in the disc tray  
without stopping playback.  
Auto search/Manual search  
During play, pressing the 4 button once causes the Player to  
replay the current track from the beginning. Pressing the ¢  
button once causes the Player to skip to the next track. The  
current position on the disc is displayed on the television screen.  
Press the EXCHANGE button. The disc tray opens and you can  
change the discs inside.  
Note that you can change only three discs in the opening area.  
EXCHANGE  
EXCHANGE  
PREV  
NEXT  
or  
or  
(Remote control)  
After changing the discs, press the EXCHANGE button again to close  
the disc tray.  
(Remote control)  
Holding down the 4 / ¢ buttons on the player or the 1 / ¡  
buttons on the remote control unit causes the disc to fast forward  
or reverse.  
It is also possible to change the discs during program playback or  
random playback, following the above procedure.  
Continuing to hold down the buttons causes it to search much  
faster.  
Note  
When the disc tray is opened by pressing the EXCHANGE button,  
it is not possible to close it by pushing it back with hand. Press the  
EXCHANGE button again or the 0 OPEN/CLOSE button to close  
the tray.  
2-1  
1:30  
B 3 3 – – – E M.SERCH  
(Remote control)  
(Television screen)  
Note  
In some circumstances, these functions are not available when the  
PBC function is activated.  
Slow-motion playback  
Press the SLOW button to play in slow-motion. By pressing the  
SLOW button consecutively, the playback speeds are cycled as  
shown below.  
SLOW  
1/4  
1/8  
1/16  
Normal  
Note  
This function only can be used when a moving picture is show on  
the screen.  
Page 8  
BASIC OPERATIONS  
Using the remote control  
Using the SHIFT button on the remote  
control unit  
Presetting the remote control to operate  
your own TV  
You can control other functions with the remote control, simply by  
pressingabuttonwhileholdingdowntheSHIFTbutton. Someofthese  
functions are useful for Karaoke and Video CD playing, others for  
You can use the Player’s remote control unit to control some functions  
on your TV set (e.g., turning the TV on and off, adjusting volume, or  
selecting channels). First, though, you must preset the remote control  
to make it compatible with your TV.  
controlling the TV.  
SHIFT  
Operation  
1. Check the Preset Code Table (page 10) to determine the two-  
digit brand code number for your TV.  
2. While holding down the TV/VIDEO button on the remote con-  
trol, press the Number keys to insert the two-digit brand code  
number. (For example, if the code number is "28", press  
Number key 2, then 8. If the first digit is a "0", press 10. Thus,  
if the code number is "09", press Number key 10, then 9. If the  
code number is "10", press Number key 1, then 10. If it is "20",  
press Number key 2, then 10.)  
7 SHIFT button functions for Karaoke and Video CD playing  
SHIFT + MPX VOCAL REPLACE  
7 SHIFT button functions to control the TV  
SHIFT + VCD POWER Turns the TV on and off  
SHIFT + ON SCREEN TV MUTE (Mute the TV sound)  
SHIFT + 1 TV Channel 1  
Notes  
Before the remote control unit leaves the factory, the brand code  
number is set as No. 01 (JVC).  
Depending on your television set’s age and other factors, brand  
code numbers may be different from those shown in the table. In  
such a case, try out other codes until you find one that corresponds  
to your television.  
SHIFT + 2 TV Channel 2  
3. While still holding down the TV/VIDEO button, press the 7  
SHIFT + 10 TV Channel 0*  
(STOP) button on the remote control.  
SHIFT + SLOW 1 - (The first digit of a TV Channel number 10 to  
19. Push a Number key to insert the second digit.)*  
TV/VIDEO  
+
SHIFT + PAUSE 2 - (The first digit of a TV Channel number 20  
to 29. Push a Number key to insert the second digit.)*  
SHIFT + +10 -/- - (To change a one - digit or to change a two -  
4. The TV is turned off if the code number is correct. Repeat the  
procedure from the beginning if you weren’t successful the  
first time.  
digit TV channel number, using a Number key.)*  
SHIFT + 3 ENTER (Push after choosing a channel. This  
function registers the channel you have chosen.)*  
Note  
The asterisk * indicates that these operations do not work for some  
manufacturers’ television sets.  
Page 9  
BASIC OPERATIONS  
Preset code table  
No.  
01  
02  
03  
04  
05  
06  
07  
08  
09  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
Television manufacturer  
JVC  
PANASONIC  
SONY  
SHARP  
TOSHIBA/BEIJING/CHANGHONG  
MITSUBISHI/CHANGHONG  
HITACHI  
SANYO  
FUNAI  
AIWA  
DAEWOO  
SAMSUNG  
LG (GOLDSTAR)  
THOMSON  
FERGUSON  
PHILIPS/TCL/CHANGHONG  
GRUNDIG  
ITT  
MIVER  
FINLUX  
NOKIA  
NEC  
JINXING/PEONY1  
PEONY2  
PEONY3/CHANGHONG  
KONKA  
PEIJIN/NOBLEX  
TCL  
Page 10  
VARIOUS UNIQUE FUNCTIONS  
Various functions can  
enhance your enjoyment  
Display of operations status  
Canceling a programmed track  
Preparation  
Operation  
This function is controlled by the remote control.  
There are three (3) canceling functions (canceling the last pro-  
grammed track, canceling the current track, canceling the next  
track to be played).  
Operation  
Press the ON SCREEN button on the remote control. By pressing  
the ON SCREEN button, the following information may be easily  
and quickly displayed or removed from the television screen.  
To cancel the last programmed track press the CANCEL  
button on the remote control and the last programmed track  
will be canceled. This can be done while a disc is playing.  
Time, Echo effect, Key control, Program, Repeat, Random, Multiplex-  
ing, Vocal replace, Vocal masking, Bookmark, etc.  
PROGRAMMED SONGS  
2-1  
2-2  
2-3  
2-4  
2-5  
3-1  
1-1  
1-2  
1-3  
PROGRAMMED SONGS  
The number located lowest is the  
last track programmed.  
2-1  
1:30  
ON SCREEN  
TV MUTE  
(Television screen)  
(Remote control)  
To cancel the current track press 7 (STOP) button.  
(Television screen)  
To cancel the next track, wait until the current track has  
finished and press the ¢ button and the next track will be  
canceled and the unit will go to the next programmed track.  
Programming the track sequence you want  
Note  
To verify the tracks you programmed, stop the Player and see ON  
SCREEN information  
Preparation  
It is not possible to enter programming mode during play. If playing,  
stop the player with the 7 (STOP) button.  
Clearing a program  
Operation  
1. Press the PROGRAM button to enter the programming mode.  
PROGRAM is displayed in the Display Window.  
To delete all programmed tracks you have entered, press the 7  
(STOP) button and then the PROGRAM button while the player is  
in stop mode. “PROG OFF” will be displayed on the television  
screen.  
PROGRAM  
PROGRAM  
or  
To stop the program playback in the middle, press the 7 (STOP)  
button. Pressing the 3 SELECT (PLAY) button again causes the  
Player to start playing from the next programmed track.  
(Remote control)  
PROGRAM  
2. Specify the disc by a DISC buttons (1-5) button and then the  
track by the number keys successively. You can program up  
to nine (9) tracks by repeating this procedure.  
3. To play the programmed tracks press the 3 SELECT button.  
Notes  
The track number playing, next track programmed, and number of  
programmed tracks are displayed from the left-top of the television  
screen. You may use the ON SCREEN button to delete this  
information.  
Once the programmed track is played, it is deleted from the  
program.  
You may also program tracks additionally during the program  
playback as long as the number of the programmed tracks does not  
exceed 9.  
Page 11  
VARIOUS UNIQUE FUNCTIONS  
To stop the random playback, press the 7 (STOP) button.  
Repeating tracks  
It is possible to repeat all discs or only a single track.  
Preparation  
This function is controlled by the remote control.  
Operation  
To cancel the random playback, press the RANDOM button again  
By pressing the REPEAT button consecutively, REPEAT modes  
are cycled as shown below.  
after stopping the Player.  
RANDOM  
REPEAT  
All discs  
(Remote control)  
Current track  
Note  
(Remote control)  
(Display window)  
Random is not effective in program mode.  
REPEAT ALL  
(All discs)  
REPEAT1  
(1 track)  
REPEAT OFF  
Playing a multiplex sound CD  
(Television screen)  
This function is used for multiplex sound discs.  
Notes  
See manuals attached to discs for detail information.  
When playing a programmed sequence of tracks, only one track  
repeat is available.  
The Repeat function is not available when the player is set to PBC  
ON.  
Only REPEAT ALL is available when the player is in RANDOM  
mode.  
You cannot repeat the segment between bookmarks.  
Operation  
By pressing the MPX button consecutively, channel multiplexing  
modes are cycled as shown below.  
MPX  
V.REPLACE  
MPX  
or  
(Remote control)  
Randomly playing tracks  
Preparations  
NORMAL  
(left-channel/  
right-channel)  
L-CH MONO  
R-CH MONO  
This function is controlled by the remote control.  
This function plays tracks randomly from one disc.  
This function is available while the player is in stop mode.  
(Television screen)  
Operation  
Press the RANDOM button and random playing will start.  
RANDOM  
(Remote control)  
Page 12  
VARIOUS UNIQUE FUNCTIONS  
Viewing the VIDEO INTRO of a video CD  
Viewing the highlights of a video CD  
Preparation  
This function is used for a movie video CD.  
When you play a video CD with the Playback Control function, the  
mode switch should be in the PBC OFF mode.  
Preparations  
When you play a video CD with the Playback Control function, the  
mode switch should be in the PBC OFF mode.  
Operation  
1. Play the disc you want to see a digest of.  
2. Press the VIDEO INTRO button on the remote control just after  
starting disc play. Then the Player starts to display in se-  
quence the first five (5) seconds and track numbers of all  
tracks on the disc.  
This function is controlled by the remote control unit.  
Operation  
1. Start playing the track you want to see the highlights of.  
2. After the track begins to play, press the HIGHLIGHT button on  
the remote control.  
VIDEO  
INTRO  
HIGHLIGHT  
HIGHLIGHT  
1
4
7
2
5
8
3
6
9
3. To select a track during the video intro mode, press the  
number key corresponding to the item number on the televi-  
sion screen.  
(Remote control)  
(Television screen)  
VIDEO INTRO  
1
4
7
2
5
8
3
6
9
3. To select one of the nine (9) segments, press the number key  
(1 to 9) of the segment which you want to play.  
Notes  
Whenyouchooseahighlightitwillstartfromfive(5)secondsbefore  
the shown time below each segment.  
(Television screen)  
The segments are each of nine (9) equal-time divisions of the track.  
Nine (9) different highlights are displayed for one (1) minute.  
If no number key is pressed for a minute after the Highlight view  
appears on the screen, the screen is replaced with the Highlight  
view of the next track.  
While in VIDEO INTRO or HIGHLIGHT, sometimes image is  
partiallydistorted. Thissymptomiscausedbynoiseinthediscitself  
or incorrect manufacturing, not by a malfunction of the Player.  
Notes  
The Video intro function is not available in the Random mode.  
Programming during VIDEO INTRO  
Operation  
1. Stop play.  
2. Press the PROGRAM button so that PROGRAM is lit in the  
display.  
3. Press the disc button you want to play, and enter 1 on the  
number keys.  
4. Pressthe3SELECTbuttonandthen,afterthedischasstarted  
to play, press the VIDEO INTRO button.  
5. The Player starts to display in sequence the first five (5)  
secondsandtracknumbersofalltracksonthedisc. Selectthe  
numbers you want to program. You can program nine (9)  
tracks.  
6. Press the 3 SELECT button to play.  
Page 13  
VARIOUS UNIQUE FUNCTIONS  
Playback with the  
Bookmark function  
Marking segments for later viewing with  
the Bookmark function  
Using the BOOKMARK SEARCH button  
7 With PBC off  
1. Press the BOOKMARK SEARCH button while playing a disc.  
TheBOOKMARKSEARCHlightwillflashonandoff,indicating  
the Player is in the Bookmark Search mode.  
The Bookmark function lets you mark segments of a Video CD, so that  
youcanhavealmostinstantplaybackofdesiredsceneslater. Youcan  
mark segments on up to ten discs, with a maximum of nine segments  
per disc.  
BOOK  
SEARCH  
MARK  
B.SEARCH  
or  
Evenifyoutakethediscoutoftheplayer, itsbookmarkswillstaystored  
for later use, until you erase them.  
Operation  
(Remote control)  
While playing the disc, press the BOOKMARK button at the  
segments you want to mark for later playing. Bookmark numbers  
appear on the television screen.  
2. Press the Number key (1 to 9) which corresponds to the  
number of the segment where you want to start play. Or press  
the 4 or ¢ button until the desired bookmark number  
appears on the screen.  
BOOK  
SEARCH  
MARK  
B.MARK  
or  
Note  
To exit the Bookmark Search mode and return to regular viewing,  
press the BOOKMARK SEARCH button again.  
(Remote control)  
Notes  
7 With PBC on  
The Bookmark function works only with Video CDs.  
The BOOKMARK function is most easily used when the Player is  
in PBC OFF mode.  
1. Press the BOOKMARK SEARCH button while playing a disc.  
The play will stop and the Player will enter Bookmark Search  
mode.  
When you begin marking segments in any one of the PBC ON or  
OFF, all subsequent markings and searches for that disc must be  
done in the same PBC mode.  
If you mark a segment when the Player is set for the Playback  
Control (PBC) function, the mark is placed at the beginning of the  
scene.  
BOOK  
SEARCH  
MARK  
B.SEARCH  
or  
(Remote control)  
2. Press the Number key (1 to 9) which corresponds to the  
number of the segment where you want to start play.  
Using the BOOKMARK DIGEST button  
1. Press the BOOKMARK DIGEST button on the remote control  
Note  
while playing the disc.  
The Bookmark Search function ends automatically, and the player  
returns to regular viewing.  
B.DIGEST  
Canceling individual bookmarks  
2. The marked segments will be highlighted on the screen, with  
their respective numbers (maximum of nine).  
3. Press the Number key (1 to 9) which corresponds to the  
number of the segment where you want to start play.  
1. If the Player is in PBC OFF mode, start playing the segment  
whose bookmark you want to cancel.  
2. Press the CANCEL button on the remote control. The book-  
mark for the segment immediately preceding the part you are  
playing will be canceled. (If the Player is in PBC ON mode, the  
bookmark with the highest number will be canceled.)  
1
2
3
4
5
6
7
8
9
10  
+10  
CANCEL  
Note  
Note  
If you plan to use the BOOKMARK DIGEST function, register all  
bookmarks with the player in the same PBC mode.  
When you cancel a bookmark number, all subsequent bookmark  
numbers change, moving up one level to fill the gap you made.  
The Bookmark Digest function is not available in PBC function.  
Page 14  
VARIOUS UNIQUE FUNCTIONS  
Using a microphone  
Canceling all bookmarks on individual  
discs  
Using a wired microphone  
Operation  
Up to two (2) microphones can be connected to the MIC 1/2 jacks on  
the front panel.  
7 When the disc whose bookmarks you want to cancel is in the  
Player:  
This cancels all bookmarks on the disc whose play you stopped.  
This function is available while the player is in stop mode.  
Keep holding down the 8 STILL (PAUSE) button on the player  
until bookmark information on the television screen stops  
blinking.  
STILL  
PROGRAMMED SONGS  
DISC: 1  
BOOKMARK  
CANCEL  
MIC 1  
MIC 2  
(Television screen)  
7 When the disc is not in the Player:  
This cancels all bookmarks on the disc which was played the least  
resently.  
1. Turn on the microphone switch.  
2. Turn the MIC 1, MIC 2 knobs clockwise (level up) or counter-  
clockwise (level down) as desired.  
Keep holding down the 7 (STOP) button on the player until  
bookmarkinformationonthetelevisionscreenstopsblinking.  
MIC 1  
MIC 2  
PROGRAMMED SONGS  
DISC: 3  
BOOKMARK  
CANCEL  
MIN  
MAX  
MIN  
MAX  
ATTENTION  
Whenyouarenotusingthemicrophone, settheMICswitchtoOFF.  
(Television screen)  
Be sure to remove the microphone  
NotewhenconnectingthesoundoutputtotheinputofaTVorVCR:  
If an excessively strong signal is given to a unit through a micro-  
phone, for example when using Karaoke, it may cause an adverse  
effect such as distorted sound. Lower the sound volume using the  
microphone control.  
The total number of  
discs with bookmarks  
Karaoke etiquette  
Think of your neighbors when you are enjoying karaoke music.  
Particularly late at night, the sound you enjoy may reach your  
neighborsmorethanyouexpect. Commonsenseandcourtesyare  
always appreciated.  
Page 15  
VARIOUS UNIQUE FUNCTIONS  
Adjusting music key  
Vocal replace  
Press the KEY CONTROL buttons ( or #) to change the key in  
which the music plays. To return the music to its original key,  
press the NORMAL button.  
Preparation  
This function is used for multiplex sound discs.  
You can adjust the music using the remote control unit also.  
Operation  
1. While holding down the SHIFT button, press the MPX/  
V.REPLACE button during play or stop. REPLACE will appear  
on the display window and V.REPLACE will appear on the  
television screen. When you start singing, the disc vocal is  
removed and your voice is inserted into the music.  
KEY CONTROL  
DOWN NORMAL  
UP  
or  
KEY CONTROL  
SHIFT  
MPX  
V.REPLACE  
(Remote control)  
+
Notes  
The degree the key has been sharpened or flattened is displayed  
on the television screen.  
2. To cancel voice replacement, hold down the SHIFT button and  
press the MPX/V.REPLACE button again.  
When the song ends the key control will return to NORMAL mode  
automatically.  
Note  
You cannot use the Vocal Replace function with a disc that has  
vocals recorded on the left channel.  
Adjusting echo effect  
Turn the DIGITAL ECHO knob clockwise (level up) or counter-  
clockwise (level down) to adjust the echo effect as desired.  
DIGITAL ECHO  
MIN  
MAX  
Page 16  
OPERATION OF PLAYBACK CONTROL FUNCTION  
Playing Video CDs with  
Playback Control function  
This Player provides a Playback Control function which utilizes a  
procedure (menu selection) programmed in a video CD. The playback  
operation procedure may differ depending on the disc you use.  
Operation  
1. Verify that the PBC button is set to ON.  
2. PresstheDISC(1through5)or3 SELECTbutton, andthenthe  
PlayerstartsupthePBCfunction. “PbisshownintheDisplay  
window.Themainmenuaredisplayedonthetelevisionscreen.  
The Playback Control function is described below and in the figure.  
High-resolution still image display - Super-fine reproduction of still  
images with more than 4 times the resolution of video tape.  
Menu-driven playback - interactive menus for easy selection of  
tracks  
SELECT  
DISC  
or  
1
2
3
4
5
Preparation  
A video CD with the Playback Control function is required for this  
operation.  
The PBC button must be set to ON.  
The buttons available for use are the number keys, the 4 / ¢  
PREV/NEXTbuttons,3SELECTbutton,and  
RETURNbutton.  
2-PBC  
PBC  
1
2
3
4
Button functions  
Number keys ............................ Select a specific menu item from the  
(Including +10 button) television screen or monitor.  
4 / ¢ PREV/NEXT buttons .. Move through menu etc.  
3 SELECT button .................... When “3” or “SELECT” is displayed  
on the television screen, pressing  
this button jumps to the specific pic-  
ture.  
(Television screen)  
3. To move through the disc menus, press the 4 / ¢ PREV/  
NEXT button.  
PREV  
NEXT  
RETURN button ................ Returns to the menu.  
7 (STOP) button ...................... Stop operations.  
or  
4. When the disc menu you want appears, select an item in the  
menu by using the number keys. The numbers on the number  
keys correspond to the menu item numbers.  
5. To return to a menu press the  
RETURN button.  
RETURN  
Notes  
Page numbers in the disc menu show that preceding pages exist.  
To move from the current menu, press the 4 / ¢ PREV/NEXT  
button.  
If you have no desire to use the PBC function when playing a disc  
with the PBC function, select "PBC OFF" mode using the PBC ON/  
OFF button before playing.  
If you change the PBC mode from ON to OFF when playing back  
a PBC disc, playback will stop. Operate the procedure above again  
from the beginning.  
If you press the number keys directly to select the track before  
playing, you can’t enter PBC mode.  
Page 17  
OPERATION OF PLAYBACK CONTROL FUNCTION  
Menu-driven playback  
You can interact with the screen using a menu display to select and  
play an entry.  
High-resolution still image display  
You can display high-quality images four times clearer than moving  
pictures.  
Video CDs with Playback Control function  
What is Playback Control function?  
The Playback Control function, allows you to enjoy menu-driven  
operation and high-resolution still images having a resolution four  
times greater than moving pictures.  
Example of playback using the Playback Control function  
1
2
3
Menu screen  
1
2
3
Press  
RETURN.  
1
2
3
Moving  
picture  
1
2
1
2
1
2
3
To next screen  
Press  
RETURN.  
Moving  
picture  
Moving  
picture  
Moving  
picture  
Still  
picture  
Still  
picture  
Moving  
picture  
Moving  
picture  
Moving  
picture  
To previous screen  
Press  
RETURN.  
A selection menu is displayed when you start playing a video CD disc  
with the Playback Control feature. The selection menu shows a list  
of numbers for selection. Some discs may show moving pictures or  
a divided screen.  
3. When the selection menu is redisplayed after you have played  
your selection, selecting a number again replays its contents.  
(Some discs may show the menu screen several times.)  
When “Next” and “Prev” are shown, pressing “NEXT” or “PREV”  
can change the selection menu.  
1. When a list of numbers is displayed, selecting a number shows its  
contents.  
4. After playback, press  
screen.  
RETURN to go back to the previous  
To stop playback, press 7 (STOP).  
2. When 3” or “SELECT” is displayed on the television screen,  
pressing this button jumps to the specific picture.  
Note  
When a menu is displayed for a long time (about 10 minutes), the  
screen background automatically fades out to prevent screen  
burn-in while the setting is suspended.  
Page 18  
RESTRICTING USE OF YOUR DISCS  
Locking a disc with the  
Read-Protect function  
Locking a disc  
Canceling Read-Protect  
TheRead-Protectfunctionrestrictsviewingofadisc. Onlypeoplewho  
know the code can unlock the disc. You can lock only Video CDs (up  
to 10 discs).  
Operation  
1. Place the disc in a tray, then press the DISC button (1 - 5) for  
that tray. PROTECT is displayed on the television screen.  
DISC  
Notes  
You cannot lock a disc while it is playing, or when the VCD light is  
blinking (i.e., immediately after turning on the player or shutting a  
disc tray). Stop the disc, then lock it.  
1
2
3
4
5
All Read-Protect functions are performed using buttons on the  
Player, not on the remote control.  
2. Hold down the 4 PREV (Previous) button on the Player for  
more than three seconds. The indication “Loc” in the Display  
window will flicker for a moment.  
Operation  
1. Play the disc for a moment, then press the 7 (STOP) button.  
PREV  
2. Hold down the NEXT button on the Player for at least three  
seconds. Thetrackandtimenumbersarenolongerdisplayed.  
3. Press the Number key “8” four times. You can now play the  
disc.  
NEXT  
1
2
3
4
5
6
7
8
9
10  
+10  
3. Press the Number key “8” four times. The Display window  
indicates “Loc.”  
Now the disc cannot be viewed. You can open and close the tray and  
you can turn the Player power on and off, but no other functions are  
available for this locked disc.  
Canceling Read-Protect for a single  
viewing  
Notes  
Operation  
PROTECT is displayed on the television screen.  
1. As above, hold down the 4 PREV (Previous) button on the  
Player for at least three seconds. The indication “Loc” in the  
Display window will flicker for a moment.  
Cut out the following instructions and keep them separately, to  
ensure privacy.  
PREV  
2. Press the Number key “7” four times. You can now play the  
disc, but only until you press the 0 OPEN/CLOSE button for  
thatdisc, oruntilyouplayanotherdisc. (TurningoffthePlayer  
power does not lock the disc again.) This function is conve-  
nientwhenyouwanttoplayadisc,butyoualsowanttorestrict  
its use later.  
Page 19  
GRAPHIC/DIGITAL AUDIO CDs  
Playing CD Graphics/  
digital audio CDs  
Playing CD Graphics  
Basic video CD-playing procedures apply although the pictures are  
still. A CD Graphics is identified by “CD-G” shown on the display.  
Notes  
The following operations may distort the image on the screen.  
Searching for starting point of music  
Fast forwarding/reversing  
Stop/pause  
If paused, the screen changes to blue in a few minutes. This is to  
prevent burn-in of the TV screen.  
Playing digital audio CDs  
BasicvideoCD-playingproceduresapplytothereproductionofsound.  
Note  
The display has no indicator to show disc type.  
Page 20  
SPECIFICATIONS  
Main specifications  
XL-FV323TN  
Accessories  
AC power cord ........................................................................... 1  
Audio video cord ........................................................................ 1  
Remote control unit (RM-SXFV555U)........................................ 1  
Batteries (R6P(SUM-3)/AA(15F)) ......................................... 2  
AC plug adaptor (except Hong Kong and China)....................... 1  
Model  
Video CD player  
Playback disc Video CD (with/without Playback Control function)  
CD Graphics  
Digital Audio CD  
Total harmonic  
0.01% (1kHz)  
distortion  
S/N ratio  
90 dB  
Frequency  
response  
20Hz – 20kHz  
Input terminal Microphone  
2 mV (9.1 k)  
Output  
terminal  
Line output  
2.0 Vrms (full scale)  
1.0 Vp-p (75)  
Video output (composite)  
Digital echoing  
Echoing  
Power  
AC 115-127/220-240V  
50/60Hz  
requirements  
Selectable with the voltage selector  
(except The People's Republic of China)  
AC 220V  
50Hz (The People's Republic of China)  
Power  
consumption  
15 watts  
5 watts  
In standby mode  
5.2 Kg (11.5 lbs)  
448 x 128 x 385 mm  
Weight  
Dimensions  
(W/H/D)  
17-11/16 x 5-1/16 x15-3/16 inches  
Page 21  
TROUBLESHOOTING  
Troubleshooting  
What appears to be a malfunction may not always be so. Please go through the following list before requesting service.  
Symptom  
Possible cause  
Power plug is disconnected from AC outlet.  
Batteries are exhausted.  
Remedy  
Power does not come on.  
Remote control does not work.  
Firmly connect the plug to AC outlet.  
Replace the batteries with new ones.  
The tip of the remote control unit is not pointed at the Use the remote control correctly.  
receiving part of the player.  
No image is displayed on the  
monitor.  
The video cord is not connected.  
The TV is not set in video mode.  
An incompatible disc is loaded.  
No disc is loaded.  
Firmly connect the cord.  
Set the TV in video mode.  
Load a disc compatible with the player.  
Load a disc.  
Playback does not start.  
Disc is loaded upside down.  
Audio cord is not connected.  
Operation of the external amplifier is incorrect.  
Disc is dirty.  
Reload the disc with the label up.  
Firmly connect the cord.  
Speaker does not produce  
sound.  
Operate the amplifier correctly.  
Wipe the disc surface with a soft cloth.  
Correctly connect cords. (See page 2.)  
Sound is distorted or noise is  
generated.  
Image is garbled.  
Connection is wrong.  
Sound is intermittent.  
Image is garbled.  
Disk is dirty.  
Wipe the disc surface with a soft cloth.  
(See page 1.)  
Disc is scratched.  
Disc is warped.  
Replace the disc with a new one.  
Disc tray does not come out when Power plug is disconnected from the power outlet.  
OPEN/CLOSE button is  
pressed.  
Firmly insert the plug into the outlet.  
0
Operation is not possible.  
Microcomputer malfunctions due to lightning or static Turn the power off, then on again.  
electricity.  
The malfunction may be caused by a device other than the player. Check other devices connected to the player.  
Page 22  
We would like to thank you for purchasing one of our JVC products.  
Before connecting this unit to the wall outlet, read the instructions  
carefully to ensure that you obtain the best possible performance. If  
you have any questions, consult your JVC dealer.  
Table of contents  
GENERAL INFORMATION ............................................................ 1  
Care and handling of compact discs ............................................... 1  
BEFORE USING FOR THE FIRST TIME ....................................... 2  
Basic connections ........................................................................... 2  
Connecting player to a TV or amplifier  
using the audio video cord ......................................................... 2  
Video out select ......................................................................... 2  
Connecting the power cord ........................................................ 3  
Installing batteries ........................................................................... 3  
Putting batteries in the remote control unit ................................ 3  
OVERVIEW OF CONTROLS ......................................................... 4  
Front panel ................................................................................. 4  
Remote control unit .................................................................... 5  
BASIC OPERATIONS .................................................................... 6  
Now you can play a variety of video CDs!! ..................................... 6  
Display window .......................................................................... 6  
Preparation for playing ............................................................... 6  
Loading discs in the disc tray ..................................................... 6  
Starting to play disc(s) ............................................................... 6  
Specifying a desired disc ........................................................... 7  
Using track number keys ........................................................... 7  
Stopping play ............................................................................. 7  
Pausing play .............................................................................. 7  
Skipping to a desired disc .......................................................... 7  
Auto search/Manual search ....................................................... 8  
Slow-motion playback ................................................................ 8  
Changing discs during playback ..................................................... 8  
Using the remote control ................................................................. 9  
Presetting the remote control to operate your own TV .............. 9  
Using the SHIFT button on the remote control unit.................... 9  
Preset code table ..................................................................... 10  
VARIOUS UNIQUE FUNCTIONS................................................. 11  
Various functions can enhance your enjoyment ........................... 11  
Display of operations status ..................................................... 11  
Programming the track sequence you want............................. 11  
Canceling a programmed track ................................................ 11  
Clearing a program .................................................................. 11  
Repeating tracks ...................................................................... 12  
Randomly playing tracks .......................................................... 12  
Playing a multiplex sound CD .................................................. 12  
Viewing the VIDEO INTRO of a video CD ............................... 13  
Programming during VIDEO INTRO ........................................ 13  
Viewing the highlights of a video CD ....................................... 13  
Playback with the Bookmark function ........................................... 14  
Marking segments for later viewing with the Bookmark function 14  
Using the BOOKMARK DIGEST button................................... 14  
Using the BOOKMARK SEARCH button ................................. 14  
Canceling individual bookmarks .............................................. 14  
Canceling all bookmarks on individual discs............................ 15  
Using a microphone ...................................................................... 15  
Using a wired microphone ....................................................... 15  
Adjusting music key ................................................................. 16  
Adjusting echo effect................................................................ 16  
Vocal replace ........................................................................... 16  
OPERATION OF PLAYBACK CONTROL FUNCTION ............... 17  
Playing Video CDs with Playback Control function ....................... 17  
Video CDs with Playback Control function............................... 18  
RESTRICTING USE OF YOUR DISCS ........................................ 19  
Locking a disc with the Read-Protect function .............................. 19  
Locking a disc .......................................................................... 19  
Canceling Read-Protect ........................................................... 19  
Canceling Read-Protect for a single viewing ........................... 19  
GRAPHIC/DIGITAL AUDIO CDs ................................................. 20  
Playing CD Graphics/digital audio CDs ........................................ 20  
Playing CD Graphics................................................................ 20  
Playing digital audio CDs ......................................................... 20  
SPECIFICATIONS ........................................................................ 21  
Main specifications........................................................................ 21  
TROUBLESHOOTING ................................................................. 22  
Troubleshooting ............................................................................ 22  
AC Power Line Instructions (not applicable for Europe, U.S.A., Canada,  
Australia and U.K.)  
LINE VOLTS  
220V-240V  
115V-127V  
AC POWER CORD  
VIDEO OUT  
VIDEO OUT SELECT  
PAL  
AUDIO OUT  
RIGHT LEFT  
NTSC  
PAL AUTO  
IMPORTANT  
BEFORE PLUGGING IN, check that your AC power line  
voltage corresponds with the position of the voltage  
selector switch provided on the outside of this equipment.  
If different, reset the voltage selector switch, to prevent  
damage or risk of fire/electric shock.  
0898TTMUBNJEM  
J
C
V
VICTOR COMPANY OF JAPAN, LIMITED  
EN, CH  

Morphy Richards Coffeemaker CM47087 MUK Rev 3 User Manual
Keurig Coffee Brewer B150 User Manual
Kenwood KDC V7521 User Manual
Fujitsu Eturneus Disk Storage System ISCSI for VMware ESX User Manual
FieldServer Gamewell FS 8700 132 User Manual
Clarion DXZ466MP User Manual
Braun AROMASTER KF 63 TYPE 4076 User Manual
Black Box Computer Accessories Gigabit speed plus extra power for high wattage devices User Manual
Black & Decker DCM20WH User Manual
AEG KF 1050 User Manual