JVC KW XC410 User Manual

CD/CASSETTE RECEIVER

KW-XC410/KW-XC400

RECEPTOR CON CD/CASSETTE KW-XC410/KW-XC400

RECEPTEUR CD/CASSETTE

KW-XC410/KW-XC400

For canceling the display demonstration, see page 8.

Para cancelar la demostración en pantalla, consulte la página 8.

Pour annuler la démonstration des affichages, référez-vous à la page 8.

For installation and connections, refer to the separate manual.

Para la instalación y las conexiones, refiérase al manual separado.

Pour l’installation et les raccordements, se référer au manuel séparé.

For customer Use:

Enter below the Model

No. and Serial No. which

are located on the top or

bottom of the cabinet.

Retain this information

for future reference.

INSTRUCTIONS

MANUAL DE INSTRUCCIONES

MANUEL D’INSTRUCTIONS

Model No.

Serial No.

GET0320-001B

[J]

Contents

How to reset your unit ...........................

How to forcibly eject a disc...................

How to read this manual........................

How to use the MODE button...............

Tape operations.....................17

Playing a tape..................................... 17

Finding the beginning of a tune............. 17

Other convenient tape functions............ 17

Control panel —

Sound adjustments ................18

Selecting preset sound modes

KW-XC410/KW-XC400............... 5

Parts identification.................................

(EQ: equalizer)................................. 18

Adjusting the sound............................... 18

Storing your own sound adjustments..... 19

Remote controller — RM-RK50 ... 6

Main elements and features ...................

General settings — PSM .........20

Getting started....................... 7

Basic procedure ..................................... 20

Basic operations..................................

Canceling the display demonstrations...

Setting the clock ....................................

External component operations...23

Playing an external component ............ 23

Radio operations ................... 9

Satelliteradio operations .......24

Listening to the SIRIUS Satellite radio... 25

Listening to the XM Satellite radio ....... 25

Storing channels in memory.................. 26

Listening to a preset channel ................. 26

Listening to the radio...........................

Storing stations in memory....................

Listening to a preset station................... 10

Scanning broadcast stations................... 10

Assigning titles to the stations............... 11

Maintenance..........................27

Handling discs ....................................... 27

Handling cassettes ................................. 27

Disc operations ......................12

Playing a disc in the unit ..................... 12

Playing discs in the CD changer ........... 13

Other main functions ............................. 15

Changing the display information ......... 15

Selecting the playback modes................ 16

More about this unit...............28

Troubleshooting.....................31

Specifications.........................33

For safety....

Temperature inside the car....

• Do not raise the volume level too much, as

this will block outside sounds, making driving

dangerous.

• Stop the car before performing any

complicated operations.

If you have parked the car for a long time in

hot or cold weather, wait until the temperature

in the car becomes normal before operating the

unit.

How to read this manual

How to use the MODE button

Press MODE repeatedly to select the different

functions available during play.

The following methods are used to make the

explanations simple and easy-to-understand:

• Some related tips and notes are explained in

“More about this unit” (see pages 28 – 30).

• Button operations are mainly explained with

the illustrations as follows:

Time countdown indicator

Press briefly.

Press repeatedly.

Ex.: When “SSM” is selected

While listening to the radio:

• You cannot select “SSM” or “SCAN”

if you are listening to the station stored

in the EX (extra) button, see page 10 for

details.

Press either one.

SSM

SCAN

MONO

Press and hold until

your desired response

begins.

Canceled

(Station frequency)*

While listening to a disc:

REPEAT

Press and hold both

buttons at the same

time.

–10 +10

RANDOM

Canceled

INTRO

(Track no. and

Elapsed playing time)*

The following marks are used to indicate...

While listening to a tape:

DOLBY B

B.SKIP

REPEAT

: Built-in CD player operations.

: External CD changer operations.

Canceled

(Playback direction)*

While adjusting the sound mode:

• Pressing MODE allows you to store the

adjusted sound mode into memory. (See

page 19 for details.)

This unit is equipped with the steering

wheel remote control function.

• See the Installation/Connection Manual

(separate volume) for connection.

* Depending on the level meter setting. (See

page 20 for details.)

Control panel — KW-XC410/KW-XC400

Parts identification

Display window

1 Loading slot

Display window

i Tuner reception indicators—ST (stereo),

MO (monaural)

o Disc information indicators—

(track/file), TAG (ID3 Tag), (folder)

; Text name indicators—DISC, STATION

a Main display, level meter

s Clock indicator

(standby/on attenuator) button

3 DISP (display) button

4 MODE button

5 Cassette compartment

6 Remote sensor

• DO NOT expose the remote sensor to

strong light (direct sunlight or artificial

lighting).

d EQ (equalizer) indicator

f LOUD (loudness) indicator

7 AUX (auxiliary) input jack

8 Number buttons

9 CD 0 (CD eject) button

p Display window

q 5 (up) / ∞ (down) buttons

PROG (program) 5 / ∞ buttons

(Dolby B NR) indicator

h Playback disc indicators—MP3, WMA

j B.SKIP (blank skip) indicator

k Source display

l Level meter, volume meter, time countdown

indicator

/ Playback mode indicators—DISC,

(folder), RND (random), RPT (repeat),

INT (intro), (track/file), MAG (magazine)

z Loaded source indicators— (disc),

(tape)

w 4

¢ buttons

e SEL (select) button

r T 0 (tape eject) button

t Control dial

y Reset button

u Source buttons—CD/CD-CH, TAPE/AUX,

FM/AM SAT (satellite), EX (extra)

Remote controller — RM-RK50

Installing the lithium coin battery

(CR2025)

Main elements and features

(standby/on/attenuator) button

Turns the power on if pressed briefly or

attenuates the sound when the power is on.

•

• Turns the power off if pressed and held.

2 5 U (up) / D (down) ∞ buttons

• When operating, aim the remote controller

directly at the remote sensor on the unit.

Make sure there is no obstacle in between.

•

Changes the FM/AM bands with 5 U only.

Changes the preset stations with D ∞ only.

• Changes the folder of the MP3/WMA

discs.

Warning:

•

Changes the tape directions with 5 U only.

• While playing an MP3 disc on an

MP3-compatible CD changer:

– Changes the disc if pressed briefly.

– Changes the folder if pressed and held.

• While listening to the satellite

(SIRIUS or XM) radio:

• Do not install any battery other than

CR2025 or its equivalent; otherwise, it

may explode.

• Store the battery in a place where children

cannot reach to avoid risk of accident.

• To prevent the battery from over-heating,

cracking, or starting a fire:

– Do not recharge, short, disassemble,

heat the battery, or dispose of it in a fire.

– Do not leave the battery with other

metallic materials.

– Do not poke the battery with tweezers or

similar tools.

– Changes the categories.

3 VOL – / VOL + buttons

• Adjusts the volume level.

4 SOUND button

• Selects the sound mode (EQ: equalizer).

5 SOURCE button

• Selects the source.

6 2 R (reverse) / F (forward) 3 buttons

• Searches for stations if pressed briefly.

• Fast-forwards or reverses the track if

pressed and held.

– Wrap the battery with tape and insulate

when throwing away or saving it.

• Changes the tracks of the disc if pressed

briefly.

• Fast-forwards or reverses the tape if

pressed and held.*

Caution:

• Finds the beginning of a tune (MMS)

while listening to a tape if pressed

briefly.*

• While listening to the satellite radio:

– Changes the channels if pressed briefly.

– Changes the channels rapidly if pressed

and held.

* To release these operations, press 5 U.

Playback resumes.

Getting started

For your favorite station

Basic operations

• Stored your favorite

station, see page 10

for details.

For CD/CD-CH

For TAPE/AUX

Turn on the power.

For FM/AM tuner

• Select “CD-CH” when using an Apple

iPod^®or a JVC D. player (see page 23).

iPod is a trademark of Apple

Computer, Inc., registered in the U.S.

and other countries.

* You cannot select these sources if they

are not ready or not connected.

For SIRIUS Satellite radio*

⁄

Adjust the volume.

Volume level appears.

For XM Satellite radio*

Volume level indicator

Adjust the sound as you want.

(See pages 18 and 19.)

To drop the volume in a moment (ATT)

4 Finish the procedure.

To restore the sound, press

it again.

To turn off the power

To activate the display demonstration

In step 3 above...

Canceling the display

demonstrations

If no operations are done for about 20 seconds,

display demonstration starts.

Setting the clock

[Initial: DEMO ON]—see page 20.

2 ^{Set the hour and minute.}

1 Select “CLOCK HOUR,” then

adjust the hour.

2 Select “CLOCK MIN,” (minute)

then adjust the minute.

3 Finish the procedure.

Radio operations

2 Select the desired station frequencies.

Listening to the radio

When an FM stereo broadcast is hard to

receive

Lights up when monaural mode is activated.

Lights up when receiving an FM stereo

broadcast with sufficient signal strength.

Reception improves, but stereo effect will

be lost.

To restore the stereo effect, repeat the same

procedure. Then, in step 2, select “MONO

OFF.”

Selected band appears.

Start searching for a station.

Storing stations in memory

You can preset six stations for each band.

When a station is received, searching

stops.

To stop searching, press the same

button again.

FM station automatic presetting—

SSM (Strong-station Sequential

Memory)

1 ^{Select the FM band (FM1 – FM3)}

To tune in to a station manually

In step Ÿ above...

you want to store into.

To be continued....

Listening to a preset station

2 Select the preset station (1 – 6) you

“SSM” flashes, then disappears when

automatic presetting is over.

want.

Local FM stations with the strongest signals are

searched and stored automatically in the FM

band.

Manual presetting

Ex.:Storing FM station of 92.5 MHz into the

preset number 4 of the FM1 band.

To tune in to your favorite station (EX)

If you press the button

again, the previous source

will be played back again.

Scanning broadcast stations

2 Start scanning.

Preset number flashes for a while.

Storing your favorite station into the

EX (extra) button

Each time a broadcast is tuned in, scanning

stops for about 5 seconds (tuned frequency

appears on the display), and you can check

what program is now being broadcast.

Ex.:Storing your favorite FM station of

92.5 MHz into the EX button

While listening to an FM station, tune in

to your favorite station, then....

3 Start listening to the program.

4 Finish the procedure.

Assigning titles to the stations

You can assign titles to 30 station frequencies

(including both FM and AM). Each station

name can be assigned up to 10 characters.

However, you cannot assign title to the station

frequency stored in the EX button.

To erase the entire title

In step 3 on the left...

1 Tune in to the station you would like

to assign a title to.

2 Enter the assigning mode.

To change the information shown on the

display

Assigned title*

Station frequency

(and Preset no.)

* If no title is assigned, “NO NAME” appears

for a while.

3 Assign a title.

1 Select a character set.

Available characters

Upper case

Lower case

2 Select a character.

Numbers and symbols

3 Move to the next (or previous)

character position.

4Repeat steps 1 to 3 until you

finish entering the title.

Disc operations

• When inserting an audio CD or a CD Text

disc:

Playing a disc in the unit

Total track number Total playing time

of the inserted disc of the inserted disc

CD Text: Disc title/performer =

Track title appears automatically

(see page 15).

All tracks will be played repeatedly until

you change the source or eject the disc.

Current track Elapsed playing

number*²

time*²

• When inserting an MP3 or a WMA disc:

To stop play and eject the disc

The source changes to the last

selected source.

Total file

number

Total folder

number

*¹Either the MP3 or WMA indicator lights up

depending on the detected file.

*²Depending on the level meter setting. (See

page 20 for details.)

Disc information appears

automatically (see page 15).

Current track Elapsed playing

number*²

time*²

All disc in the magazine will be played

repeatedly until you change the source.

• Ejecting the magazine will also stop playing.

Playing discs in the CD changer

* If you have changed “EXT INPUT”

setting to “EXT INPUT”(see page

22), you cannot select the CD

changer.

About the CD changer

Select a disc.

It is recommended to use a JVC MP3-

compatible CD changer with your unit.

• You can also connect other CH-X series

CD changers (except CH-X99 and

CH-X100). However, they are not

compatible with MP3 discs, so you cannot

play back MP3 discs.

For disc number from 01 – 06:

For disc number from 07 – 12:

• You cannot play any WMA disc in the CD

changer.

• You cannot use the KD-MK series CD

changers with this unit.

• Disc text information recorded in the CD

Text can be displayed when a JVC CD

Text compatible CD changer is connected.

Selected disc number

Track number

For connection, see Installation/Connection

Manual (separate volume).

• When the current disc is an MP3 disc:

To fast-forward or reverse the track

To go to the next or previous tracks

Folder name*¹

To go to the next or previous folders for

MP3 and WMA discs

Disc information appears

automatically (see page 15).

(For MP3/WMA

discs)

Current track Elapsed playing

number*²

time*²

(For MP3 discs)

To locate a particular track (for CD) or

folder (for MP3 or WMA discs) directly

• When the current disc is an audio CD or a

To select a number from 01 – 06:

To select a number from 07 – 12:

CD Text disc:

CD Text: Disc title/performer =

Track title appears automatically

(see page 15).

Current track Elapsed playing

number*²

time*²

• To use folder search on MP3/WMA discs, it

is required that folders are assigned with

2-digit numbers at the beginning of their

folder names—01, 02, 03, and so on.

*¹“ROOT” appears if no folder is included in

the disc.

*²Depending on the level meter setting. (See

page 20 for details.)

To select a particular track in a folder (for

MP3 or WMA disc):

Other main functions

Changing the display information

Skipping a track quickly during play

While playing an audio CD or a CD

Text

Only possible on JVC

MP3-compatible CD changer

• For MP3 or WMA disc, you can skip a track

within the same folder.

Ex.: To select track 32 while playing track 6

–10 +10

While playing an MP3 or a WMA disc

• When “TAG DISP” is set to

“TAG ON” (see page 22)

First time you press 5 / ∞ button, the track

skips to the nearest higher or lower track

with a track number of multiple ten (ex.

10th, 20th, 30th).

Then each time you press the button, you

can skip 10 tracks.

• After the last track, the first track will be

selected and vice versa.

• When “TAG DISP” is set to

“TAG OFF”

: Current track/file number and

Elapsed playing time

Prohibiting disc ejection

You can lock a disc in the loading slot.

*³If the current disc is an audio CD,

“NO NAME” appears.

*⁴If an MP3/WMA file does not have ID3 tags,

folder name and file name appear. In this

case, the TAG indicator will not light up.

To cancel the prohibition, repeat the same

procedure.

Selecting the playback modes

You can use only one of the following playback modes at a time.

Select your desired playback mode.

Repeat play

Mode

Plays repeatedly

TRACK RPT

: The current track.

• RPT and light up.

FOLDER RPT*¹: All tracks of the current folder.

•

and RPT light up.

DISC RPT*²

: All tracks of the current disc.

Ex.: When “TRACK RPT” is selected

• DISC and RPT light up.

REPEAT OFF : Cancels.

Random play

Mode

Plays at random

FOLDER RND*¹: All tracks of the current folder,

then tracks of the next folder and so

on.

•

and RND light up.

DISC RND

: All tracks of the current disc.

• DISC and RND light up.

: All tracks of the inserted discs.

• RND and MAG light up.

Ex.: When “DISC RND” is selected

MAG RND*²

RANDOM OFF : Cancels.

Intro scan

Mode

Plays the beginning 15 seconds of...

TRACK INT

: All tracks of the current disc.

• INT and light up.

FOLDER INT*¹: The first track of every folder of

the current disc.

•

and INT light up.

Ex.: When “TRACK INT” is selected

DISC INT*²

: The first tracks of the inserted

discs.

• DISC and INT light up.

: Cancels.

INTRO OFF

*¹Only while playing an MP3 disc or a WMA disc.

*²Only while playing discs in the CD changer.

Tape operations

Playing a tape

Finding the beginning of a tune

Multi Music Scan (MMS) allows you to

automatically start playback from the beginning

of a specified tune.

Specify the tune you want to locate

(how many tunes ahead of or before the

current tune)

When the beginning

of the specified tune is

located, playback starts

automatically.

Playback starts automatically. When one

side of the tape reaches its end during play,

the other side of the tape automatically

starts playing. (Auto Reverse)

*³Goes back to the beginning of the current

tune.

To change the playback direction

FWD PLAY

REV PLAY

(Forward play)

(Reverse play)

Other convenient tape functions

To stop play and eject the cassette

The source changes to the last

selected source.

To fast-forward or rewind a tape

When the tape reaches its

end while fast-forwarding,

the tape direction will change

automatically.

• To turn on or off Dolby B NR*⁴

(

lights up on the display)

To stop fast-forwarding or rewinding, press

the PROG button.

• To skip blank portions on the tape

(

lights up on the display)

Prohibiting tape ejection

• To play the current tune repeatedly

You can lock a tape in the loading slot.

(

lights up on the display)

*⁴Manufactured under license from Dolby

Laboratories. “Dolby” and the double-

D symbol are trademarks of Dolby

Laboratories.

To cancel the prohibition, repeat the same

procedure.

Sound adjustments

Selecting preset sound modes

Adjusting the sound

You can adjust the sound characteristics to your

preference.

(EQ: equalizer)

Indication

Range

You can select a preset sound mode suitable to

the music genre.

FADER*¹

R06 (Rear only)

Adjust the front and rear

F06 (Front only)

speaker balance.

L06 (Left only)

R06 (Right only)

BAL (balance)

Adjust the left and right

speaker balance.

LOUD ON

LOUD (loudness)

Boost low and high

frequencies to produce a

well-balanced sound at low

volume level.

LOUD OFF

VOLUME*²

Adjust the volume.

00 (min.) to

FLAT O Hard Rock O R & B O

POP O JAZZ O DanceMusic O

Country O Reggae O Classic O

USER 1 O USER 2 O USER 3 O

(back to the beginning)

30 or 50 (max.)*³

*¹If you are using a two-speaker system, set

the fader level to “00.”

*²Normally the control dial works as the

volume control. So you do not have to select

“VOLUME” to adjust the volume level.

*³Depending on the amplifier gain control

setting. (See page 22 for details.)

To select the sound mode directly

You can select the sound mode directly using

the remote controller.

4 Adjust the selected sound elements

while the indication on step 3 is

shown.

Storing your own sound

adjustments

You can adjust the sound modes and store your

own adjustments in memory.

Preset values

Indication

LOW

MID

HIGH

LEVEL

–06

(min.) to (min.) to (min.) to

2 Select one of the sound mode to

+06

adjust.

(max.)

FREQ

60Hz

8kHz

80Hz

100Hz

120Hz

10kHz

12kHz

15kHz

WIDTH

1 (min.) 1 (min.)

to to

4 (max.) 2 (max.)

Ex.: When “JAZZ” is selected

5 Repeat steps 3 and 4 to set (or

adjust) the other sound elements.

3 Select the sound elements to adjust

while the selected sound mode is

shown.

6 Select one of the user sound modes

(USER 1, USER 2, USER 3).

LOW LEVEL O LOW FREQ. O

LOW WIDTH O MID LEVEL O

MID WIDTH O HIGH LEVEL O

HIGH FREQ. O (back to the

beginning)

7 Store the adjustments.

“MEMORY” appears for a

while.

• (LOW, MID, HIGH) LEVEL:

Adjust the enhancement level.

• (LOW, HIGH) FREQ:

Select the center frequency to adjust.

• (LOW, MID) WIDTH :

Select the band width level.

General settings — PSM

3 Adjust the PSM item selected.

Basic procedure

You can change PSM (Preferred Setting Mode)

items (except “SID”) listed in the table that

follows.

4 Repeat steps 2 and 3 to adjust the

other PSM items if necessary.

5 Finish the procedure.

2 Select a PSM item.

Indications

Selectable settings, [reference page]

DEMO MODE

Display

demonstration

DEMO ON

: [Initial]; Display demonstration will be activated

automatically if no operation is done for about

20 seconds, [8].

DEMO OFF

: Cancels.

CLOCK HOUR

Hour adjustment

1 – 12, [8]

[Initial: 1 (1:00)]

CLOCK MIN

Minute adjustment

00 – 59, [8]

[Initial: 00 (1:00)]

CLOCK DISP

Clock display

CLOCK ON

CLOCK OFF

: Clock time is shown on the display at all times even

when the unit is turned off.

: [Initial]; Clock time is shown when the unit is turned

on. If the unit is turned off, pressing DISP will show

the clock time for about 5 seconds.

LEVELMETER

Audio level meter

You can select one of the four different level meter patterns or a

demonstration of all the patterns.

LEVEL ALL [Initial] O LEVEL 1 O LEVEL 2 O LEVEL 3 O

LEVEL 4 O LEVEL OFF (canceled) O (back to the beginning)

LEVEL ALL

: Demonstrates all the level meter patterns, each for

about 20 seconds.

Indications

Selectable settings, [reference page]

CLK ADJ*¹

Clock

AUTO

: [Initial]; The built-in clock is automatically adjusted using

the clock data provided via the satellite radio channel.

adjustment

OFF

: Cancels.

T-ZONE*^1,*²

Time zone

Select your residential area from one of the following time zones for clock

adjustment.

EASTERN [Initial] “ ATLANTIC “ NEWFOUND (Newfoundland)

“ ALASKA “ PACIFIC “ MOUNTAIN “ CENTRAL “ (back to

the beginning).

DST*^1,*²

Daylight saving

time

Activate this if your residential area is subject to DST.

: [Initial]; Activates daylight savings time.

OFF

: Cancels.

SID*³

SIRIUS^®ID

The 12-digit SIRIUS identification number scrolls on the display

5 seconds after “SID” is selected, [24].

DIMMER

Dimmer

AUTO

: [Initial]; Dims the display when you turn on the headlights.

: Activates dimmer.

OFF

: Cancels

CONTRAST

Display contrast

1 – 10

: Adjust the display contrast to make the display indications

clear and legible.

[Initial: 5]

SCROLL*⁴

Scroll

ONCE

AUTO

OFF

: [Initial]; Scrolls the disc information once.

: Repeats scrolling (5-second intervals in between).

: Cancels.

• Pressing DISP for more than one second can scroll the display regardless

of the setting.

*¹Displayed only when SIRIUS Satellite radio or XM Satellite radio is connected.

*²Displayed only when “CLK ADJ” is set to “AUTO.”

*³Displayed only when SIRIUS Satellite radio is connected.

*⁴Some characters or symbols will not be shown correctly (and will be blanked) or substituted on

the display.

Indications

Selectable settings, [reference page]

EXT INPUT*¹

External input

CHANGER : [Initial]; To use a JVC CD changer, [13], an Apple iPod

or a JVC D. player, [23], a JVC compatible satellite

(SIRIUS/XM) tuner, [24].

EXT INPUT : To use another external component, [23].

AUX ADJUST

Auxiliary input

level adjustment

AUX ADJ 00 – AUX ADJ 05: Adjust the auxiliary input level

accordingly, to avoid the sudden increase of the output

level when changing the source from external component

connected to the AUX input jack on the control panel.

[Initial: AUX ADJ 00]

TAG DISP

Tag display

TAG ON

: [Initial]; Shows the ID3 tag while playing MP3/WMA

tracks, [15].

TAG OFF

: Cancels.

AMP GAIN

Amplifier gain

control

You can change the maximum volume level of this unit.

LOW PWR : VOLUME 00 – VOLUME 30 (Select this if the

maximum power of the speaker is less than 50 W to avoid

damaging the speaker.)

HIGH PWR : [Initial]; VOLUME 00 – VOLUME 50

IF FILTER

IF filter

AUTO

: [Initial]; Increases the tuner selectivity to reduce

interference noises between close stations. (Stereo effect

may be lost.)

WIDE

: Subject to the interference noises from adjacent stations,

but sound quality will not be degraded and maintains the

stereo effect.

AREA

Tuner channel

interval

AREA US

AREA EU

AREA SA

: [Initial]; Select this when using the unit in North or

South America except for Middle South America.

(FM: 200 kHz; AM: 10 kHz)

: Select this when using the unit in any other area than

North, Middle South, and South America. (FM: 50 kHz—

manual tuning, 100 kHz—auto search; AM: 9 kHz)

: Select this when using the unit in Middle South America.

(FM: 100 kHz; AM: 10 kHz)

*¹Cannot be selected if the source is “CD-CH” or “EXT.”

External component operations

This unit is ready for operating an Apple

For selecting the external

component connected to....

• AUX input jack

iPod^®or a JVC D. player from the control

panel.

• For details, refer also to the manual

supplied with the interface adapter

for iPod^®—KS-PD100 or D. player—

KS-PD500.

• CD changer jack on the rear

using KS-U57 or KS-U58

If “EXT” does not appear, see page

22 and select the external input

(EXT INPUT).

Playing an external component

• CD changer jack on the rear

using interface adapter for iPod

—KS-PD100 or for D. player—

KS-PD500

You can connect an external component to....

• CD changer jack on the rear using:

– Line Input Adapter—KS-U57 (not

supplied) or AUX Input Adapter—

KS-U58 (not supplied) for any other

components (except iPod or D. player).

– Interface adapter for iPod^®—KS-PD100

(not supplied) for controlling iPod.

– D. player interface adapter—KS-PD500

(not supplied) for controlling D. player.

• AUX (auxiliary) input jack on the control

panel.

Turn on the connected component

and start playing the source.

Adjust the volume.

⁄

Adjust the sound as you want.

(See pages 18 and 19.)

For connection, see Installation/Connection

Manual (separate volume).

Satellite radio operations

Activate your SIRIUS subscription after

connection:

This unit is Satellite (SAT) Radio Ready–

compatible with both SIRIUS Satellite radio

and XM Satellite radio.

Before operating your satellite radio:

• For connection, see Installation/

Connection Manual (separate volume).

• Refer also to the Instructions supplied

with your SIRIUS Satellite radio or XM

Satellite radio.

• “SIRIUS” and the SIRIUS dog logo are

registered trademarks of SIRIUS Satellite

Radio Inc.

• XM and its corresponding logos are

registered trademarks of XM Satellite

Radio Inc.

• “SAT Radio,” the SAT Radio logo and all

related marks are trademarks of SIRIUS

Satellite Radio Inc., and XM Satellite

Radio, Inc.

JVC DLP starts updating all the SIRIUS

channels.

Once completed, JVC DLP tunes in to the

preset channel, CH184.

Listening to the satellite radio

Connect either one of the following (separately

purchased) to the CD changer jack on the rear

of this unit.

3 Check your SIRIUS ID, see page 21.

4 Contact SIRIUS on the internet at

<http://activate.siriusradio.com/> to

activate your subscription, or you

can call SIRIUS toll-free at

• JVC SIRIUS radio DLP—Down Link

Processor, for listening to the SIRIUS

Satellite radio.

• XMDirect™ Universal Tuner Box

using a JVC Smart Digital Adapter—

XMDJVC100 (not supplied), for listening to

the XM Satellite radio.

1-888-539-SIRIUS (7474).

“SUB UPDT PRESS ANY KEY” scrolls

on the display once subscription has been

completed.

GCI (Global Control Information) update:

• If channels are updated after subscription,

updating starts automatically.

“UPDATING” flashes and no sound can be

heard.

Activate your XM subscription after

connection:

• Only Channel 0, 1, and 247 are available

before activation.

• Update takes a few minutes to complete.

• During update, you cannot operate your

satellite radio.

Selecting a particular category (SPORTS,

ENTERTAINMENT, etc.) allows you to

enjoy only the channels from the selected

category.

3 Select a channel for listening.

Holding the button changes the channels

rapidly.

XMDirect™ Universal Tuner Box starts

updating all the XM channels. “Channel 1”

is tuned in automatically.

• When changing the category or channel,

invalid and unsubscribed channels are

skipped.

3 Check your XM Satellite radio ID

labelled on the casing of the

XMDirect™ Universal Tuner Box, or

tune in to “Channel 0” (see page 26).

Listening to the

XM Satellite radio

4 Contact XM Satellite radio on

the internet at <http://xmradio.

com/activation/> to activate your

subscription, or you can call

1-800-XM-RADIO (1-800-967-2346).

Once completed, the unit tunes in to one

of the available channels (Channel 4 or

higher).

2 Select a channel for listening.

Listening to the

SIRIUS Satellite radio

Holding the button changes the channels

rapidly.

Category/channel search

You can search for programs by category

(Category Search) or channel number (Channel

Search).

• In Category Search, you can tune in to the

channels of the selected category. Category

Search begins from the currently selected

channel. The selected channel number flashes

on the display.

2 Select a category.

• In Channel Search, you can tune in to all

the channels (including non-categorised

channels).

You can tune in to all the channels of every

category by selecting “ALL.”

To be continued...

1 Select a category (Category Search).

Storing channels in memory

You can preset six channels for each band.

Ex.: Storing a channel into preset number 4.

2 Select a channel for listening.

1 Tune in to a channel you want.

Current channel number

Preset number flashes for

a while.

Ex.: When you select ”COUNTRY”

for Category Search

Listening to a preset channel

If no operation is done for about

7 seconds, Category Search is canceled.

1 Select either SIRIUS Satellite radio

or XM Satellite radio.

In Channel Search, channel name and

channel number appear on the display

during search.

• While searching, invalid and unsubscribed

channels are skipped.

2 Select the preset channel (1 – 6) you

want.

Checking the XM Satellite radio ID

While selecting “XM1,” “XM2,” or

“XM3,” select “Channel 0.”

To change the display information while

listening to a channel

The display alternately shows “RADIO ID” and

the 8-digit (alphanumeric) ID number.

To cancel the ID number display, select any

channel other than “Channel 0.”

Category name = Channel name = Artist name

= Composer name* = Song/program name/title

= (back to the beginning)

* Only for SIRIUS Satellite radio.

Maintenance

Do not use the following discs:

Handling discs

Warped

disc

Moisture condensation

Moisture may condense on the lens inside the

CD player in the following cases:

• After starting the heater in the car.

• If it becomes very humid inside the car.

Should this occur, the CD player may

malfunction. In this case, eject the disc and

leave the unit turned on for a few hours until the

moisture evaporates.

Sticker

residue

Stick-on

label

Disc

Handling cassettes

How to handle discs

When removing a disc from

its case, press down the center

holder of the case and lift the

disc out, holding it by the edges.

• Always hold the disc by the

Center holder

To clean the head

edges. Do not touch its recording surface.

When storing a disc into its case, gently insert

the disc around the center holder (with the

printed surface facing up).

• Make sure to store discs into the cases after

use.

To keep discs clean

A dirty disc may not play correctly.

If a disc does become dirty, wipe

it with a soft cloth in a straight line

from center to edge.

• Do not use any solvent (for example,

conventional record cleaner, spray, thinner,

benzine, etc.) to clean discs.

• Clean the heads after every 10 hours of use

using a wet-type head cleaning tape (available

at an audio store).

When the head becomes dirty, you may

realize the following symptoms:

– Sound quality is reduced.

– Sound level decreases.

– Sound drops out.

• Do not touch the highly-polished head with

any metallic or magnetic tools.

To play new discs

New discs may have some rough

spots around the inner and outer

edges. If such a disc is used, this

unit may reject the disc.

To keep the tape clean

• Always store the cassettes in their storage

cases after use.

• Do not store cassettes in the following places:

– Subject to direct sunlight

To remove these rough spots, rub the edges

with a pencil or ball-point pen, etc.

– With high humidity

– At extremely hot temperatures

More about this unit

Basic operations

Disc operations

Turning on the power

Caution for DualDisc playback

• By pressing the source buttons on the unit,

you can also turn on the power. If the source

is ready, playback also starts.

• The Non-DVD side of a “DualDisc” does

not comply with the “Compact Disc Digital

Audio” standard. Therefore, the use of Non-

DVD side of a DualDisc on this product may

not be recommended.

Turning off the power

• If you turn off the ignition key without

turning off this unit, the unit will

General

• MP3 and WMA (Windows Media^®Audio)

“tracks” (words “file” and “track” are used

interchangeably) are recorded in “folders.”

• This unit has been designed to reproduce

CDs/CD Texts, and CD-Rs (Recordable)/

CD-RWs (Rewritable) in audio CD (CD-DA),

MP3 and WMA format.

automatically turn on when you turn on the

ignition key next time. If the last selected

source is ready for playback (ex. a disc

or a tape is in the unit), playback starts

automatically.

• If you turn off the power while listening to a

disc, disc play will start from where playback

has been stopped previously, next time you

turn on the power.

• When a disc has been loaded, selecting “CD”

for the playback source starts disc play.

Selecting the sources

Inserting a disc

• When no disc or cassette is loaded in the unit,

“CD” or “TAPE” cannot be selected.

• “SIRIUS,” “XM,” or “CD-CH” cannot be

selected when the target component is not

connected.

• When a disc is inserted upside down, the disc

automatically ejects and the unit starts playing

the last selected source.

• Do not insert 8 cm (3-3/16”) discs (single

CD) and unusual shape discs (heart, flower,

etc.) into the loading slot.

Tuner operations

Storing stations in memory

Playing a disc

• While fast-forwarding or reversing on an MP3

or WMA disc, you can only hear intermittent

sounds.

• During SSM search...

– All previously stored stations are erased and

stations are stored newly.

– Received stations are preset in No. 1 (lowest

frequency) to No. 6 (highest frequency).

– When SSM is over, the station stored in

No. 1 will be automatically tuned in.

• When storing a station manually, the

previously preset station is erased when

a new station is stored in the same preset

number.

• This unit can play back MP3/WMA files

meeting the conditions below:

– Bit rate: 8 kbps — 320 kbps

Playing a CD-R or CD-RW

• Use only “finalized” CD-Rs or CD-RWs.

• This unit can play back only files of the same

type which are first detected if a disc includes

both audio CD (CD-DA) files and

MP3/WMA files.

• This unit can play back multi-session discs;

however, unclosed sessions will be skipped

while playing.

• Some CD-Rs or CD-RWs may not play

back on this unit because of their disc

characteristics, or for the following reasons:

– Discs are dirty or scratched.

– Moisture condensation occurs on the lens

inside the unit.

– The pickup lens inside the unit is dirty.

– CD-R/CD-RW on which the files are

written with “Packet Write” method.

– There are improper recording conditions

(missing data, etc.) or media conditions

(stained, scratched, warped, etc.).

• CD-RWs may require a longer readout time

since the reflectance of CD-RWs is lower

than that of regular CDs.

• Do not use the following CD-Rs or CD-RWs:

– Discs with stickers, labels, or protective seal

stuck to the surface.

– Discs on which labels can be directly

printed by an ink jet printer.

– Sampling frequency:

48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)

24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)

48 kHz, 44.1 kHz, 32 kHz (for WMA)

– Disc format: ISO 9660 Level 1/ Level 2,

Romeo, Joliet, Windows long file name

• The maximum number of characters for file/

folder names vary among the disc format used

(includes 4 extension characters—<.mp3> or

<.wma>).

– ISO 9660 Level 1: up to 12 characters

– ISO 9660 Level 2: up to 31 characters

– Romeo*: up to 128 (72) characters

– Joliet*: up to 64 (36) characters

– Windows long file name*: up to 128 (72)

characters

* The parenthetic figure is the maximum

number of characters for file/folder names

in case the total number of files and folders

is 313 or more.

• This unit can recognize a total of 512 files, of

200 folders, and of 8 hierarchies.

• This unit can play back files recorded in VBR

(variable bit rate).

Files recorded in VBR have a discrepancy

in elapsed time display, and do not show the

actual elapsed time. This difference becomes

noticeable especially after performing the

search function.

• This unit cannot play back the following files:

– MP3 files encoded with MP3i and

MP3 PRO format.

Using these discs under high temperatures

or high humidity may cause malfunctions or

damage to the unit.

Playing an MP3/WMA disc

• This unit can play back MP3/WMA files

with the extension code <.mp3> or <.wma>

(regardless of the letter case—upper/lower).

• This unit can show the names of albums,

artists (performer), and ID3 Tag (Version 1.0,

1.1, 2.2, 2.3, or 2.4) for MP3 files and for

WMA files.

– MP3 files encoded in an unappropriated

format.

– MP3 files encoded with Layer 1/2.

– WMA files encoded with lossless,

professional, and voice format.

– WMA files which are not based upon

Windows Media^®Audio.

• This unit can display only one-byte

characters. No other characters can be

correctly displayed (see page 11).

– WMA files copy-protected with DRM.

– Files which have the data such as WAVE,

ATRAC3, etc.

• The search function works but search speed is

not constant.

To be continued....

Changing the source

• If you change the source, playback also stops

(without ejecting the disc).

(without ejecting the cassette).

Next time you select “CD” or “CD-CH” for

the playback source, disc play starts from

where it has been stopped previously.

Ignition key-off release

• When you turn off the ignition key with

a cassette in the compartment, the unit

automatically releases the tape from its head.

Ejecting a disc

• If the ejected disc is not removed within

15 seconds, the disc is automatically inserted

again into the loading slot to protect it from

dust. (Disc will not play this time.)

General settings—PSM

• If you change the “TAG DISP” setting from

“TAG OFF” to “TAG ON” while playing

MP3/WMA file, the tag display will be

activated when the next file starts playing.

• If you change the “AMP GAIN” setting

from “HIGH PWR” to “LOW PWR”

Tape operations

Playing a tape

• While locating a specified tune:

– If the tape is rewound to its beginning,

playback starts from the beginning of that

side.

while the volume level is set higher than

“VOLUME 30,” the unit automatically

changes the volume level to “VOLUME 30.”

– If the tape is fast-forwarded to the end, it is

reversed and played from the beginning of

the other side.

• In the following cases, Multi Music Scan

(MMS), Blank Skip, and Repeat Play may not

operate correctly:

Other main functions

• If you try to assign a title to the 31st station

frequency, “NAME FULL” flashes. Delete

unwanted titles before assignment.

– Tapes with tunes having long pianissimo

passages (very quiet parts) or non-recorded

portions.

– Tapes with short non-recorded sections.

– Tapes with high level noise or humming

between tunes.

– The Dolby NR setting does not match. For

example, if the tape is recorded with the

Dolby C NR.

• Do not use the following tape:

– Dirty or dusty tapes.

Satellite radio operations

• You can also connect the JVC SIRIUS radio

PnP (Plug and Play), using the JVC SIRIUS

radio adapter, KS-U100K (not supplied) to the

CD changer jack on the rear.

By turning on the power of the unit, you

can turn on/off the JVC PnP. However, you

cannot control it from this unit.

• To know more about SIRIUS Satellite radio

or to sign up, visit «http://www.sirius.com».

• For the latest channel listings and

programming information, or to sign up

for XM Satellite radio, visit «http://www.

xmradio.com».

– Cassette with peeling labels.

– Loose tape which may become entangled

with the mechanism.

• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service

center.

Symptoms

Remedies/Causes

• Sound cannot be heard from the

speakers.

• Adjust the volume to the optimum level.

• Check the cords and connections.

• The unit does not work at all.

Reset the unit (see page 2).

• SSM automatic presetting does not

Store stations manually.

work.

• Static noise while listening to the radio. Connect the antenna firmly.

• Disc cannot be played back. Insert the disc correctly.

• CD-R/CD-RW cannot be played back. • Insert a finalized CD-R/CD-RW.

• Tracks on the CD-R/CD-RW cannot be • Finalize the CD-R/CD-RW with the component

skipped.

which you used for recording.

• Disc can be neither played back nor

ejected.

• Disc sound is sometimes interrupted.

• Unlock the disc (see page 15).

• Eject the disc forcibly (see page 2).

• Stop playback while driving on rough roads.

• Use an unscratched disc.

• Check the cords and connections.

• “NO DISC” appears on the display.

Insert a correct disc into the loading slot.

• Disc cannot be played back.

• Use a disc with MP3/WMA tracks recorded in

the format compliant with ISO 9660 Level 1,

Level 2, Romeo, or Joliet.

• Add the extension code <.mp3> or <.wma> to

the file names.

• Noise is generated.

Skip to another track or change the disc. (Do not

add the extension code <.mp3> or <.wma> to

non-MP3 or WMA tracks.)

• A longer readout time is required

(“CHECK” keeps flashing on the

display).

Do not use too many hierarchies and folders.

• Tracks do not play back in the order

you have intended them to play.

• Elapsed playing time is not correct.

Playback order is determined when the files are

recorded.

This sometimes occurs during play. This is caused

by how the tracks are recorded on the disc.

• “NO FILES” appears on the display.

Insert a disc that contains MP3/WMA tracks.

• A cassette cannot be inserted.

Insert the cassette with the exposed tape facing

right.

• Cassette can be neither played back nor Unlock the cassette (see page 17).

ejected.

• “NO TAPE” appears on the display.

Insert a cassette correctly.

• Cassette tapes become hot.

This is not a malfunction.

• Tape sound is at very low level and

Clean the tape head using a head cleaning tape.

sound quality is degraded.

To be continued....

Symptoms

Remedies/Causes

Insert a disc into the magazine.

Insert the magazine.

• “NO DISC” appears on the display.

• “NO MAG” appears on the display.

• “RESET 8” appears on the display.

Connect this unit and the CD changer correctly

and press the reset button of the CD changer.

• “RESET 1” – “RESET 7” appears on Press the reset button of the CD changer.

the display.

• The CD changer does not work at all. Reset the unit (see page 2).

• “CALL 1-888-539-SIRIUS TO

Starts subscribing SIRIUS Satellite radio

SUBSCRIBE” scrolls on the display (see page 24).

while listening to the SIRIUS

Satellite radio.

• No sound can be heard.

“UPDATING” appears on the

display.

The unit is updating the channel information and

it takes a few minutes to complete.

Move to an area where signals are stronger.

Connect the antenna firmly.

• Either “NO SIGNAL” scrolls or

“NO SIGNL” appears on the display.

• Either “NO ANTENNA” scrolls or

“ANTENNA” appears on the display.

• “NO CH” appears on the display for

about 5 seconds, then returns to the

previous display while listening to

the SIRIUS Satellite radio.

No broadcast on the selected channel.

Select another channel or continue listening to the

previous channel.

• “NO (information)*” scrolls on the

display while listening to the SIRIUS

Satellite radio.

No text information for the selected channel.

• “---” appears on the display while

listening to the XM Satellite radio.

• “---” appears on the display for

about 2 seconds, then returns to the

previous channel while listening to

the XM Satellite radio.

Selected channel is no longer available or is

unauthorized.

Select another channel or continue listening to the

previous channel.

• “OFF AIR” appears on the display

while listening to the XM Satellite

radio.

Selected channel is not broadcasting at this time.

Select another channel or continue listening to the

previous channel.

• “LOADING” appears on the display The unit is loading the channel information

while listening to the XM Satellite

radio.

and audio. Text information are temporarily

unavailable.

• “RESET 8” appears on the display.

• Satellite radio does not work at all.

Reconnect this unit and the satellite radio

correctly and press the reset button of this unit.

* NO CATEGORY, NO ARTIST, NO COMPOSER, and NO SONG/PROGRAM

Specifications

CD PLAYER SECTION

Type: Compact disc player

AUDIO AMPLIFIER SECTION

Power Output:

Signal Detection System: Non-contact optical

pickup (semiconductor laser)

Number of Channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20 000 Hz

18 W RMS × 4 Channels at 4 Ω

and ≤ 1% THD+N

Signal to Noise Ratio:

80 dBA (reference: 1 W into 4 Ω)

Dynamic Range:

96 dB

Signal-to-Noise Ratio: 98 dB

Wow and Flutter: Less than measurable limit

MP3 Decoding Format:

MPEG1/2 Audio Layer 3

Max. Bit Rate: 320 kbps

WMA (Windows Media^®Audio) Decoding

Format:

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)

Equalizer Control Range:

Low: 12 dB (60 Hz, 80 Hz, 100 Hz, 120 Hz)

Mid: 12 dB

Max. Bit Rate: 192 kbps

High: 12 dB (8 kHz, 10 kHz, 12 kHz, 15 kHz)

Frequency Response: 40 Hz to 20 000 Hz

Line-Out Level/Impedance:

CASSETTE DECK SECTION

Wow and Flutter:

Fast-Wind Time:

0.1 % (WRMS)

100 sec. (C-60)

2.0 V/20 kΩ load (full scale)

Frequency Response: 30 Hz to 16 000 Hz

(Normal tape)

Signal-to-Noise Ratio: (Normal tape)

Dolby B NR ON: 65 dB

Output Impedance: 1 kΩ

Other Terminals: CD changer, AUX

(auxiliary) input jack,

Steering wheel remote input

Dolby B NR OFF: 56 dB

Stereo Separation:

40 dB

TUNER SECTION

Frequency Range:

GENERAL

Power Requirement:

Operating Voltage:

DC 14.4 V (11 V to 16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature:

0°C to +40°C (32°F to 104°F)

Dimensions (W × H × D):

FM: 87.5 MHz to 107.9 MHz

(with channel interval set to 100 kHz

or 200 kHz)

87.5 MHz to 108.0 MHz

(with channel interval set to 50 kHz)

AM: 530 kHz to 1 710 kHz

(with channel interval set to 10 kHz)

531 kHz to 1 602 kHz

Installation Size (approx.):

(with channel interval set to 9 kHz)

178 mm × 100 mm × 158 mm

(7-1/16" × 3-15/16" × 6-1/4")

Set Size (approx.):

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 µV/75 Ω)

178 mm × 100 mm × 175 mm

(7-1/16" × 3-15/16" × 6-15/16")

Mass (approx.):

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 35 dB

2.3 kg (5.1 lbs) (excluding accessories)

Capture Ratio: 1.5 dB

Design and specifications are subject to change

without notice.

[AM Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

If a kit is necessary for your car, consult

your telephone directory for the nearest car

audio speciality shop.

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

Still having trouble??

USA ONLY

Call 1-800-252-5722

http://www.jvc.com

We can help you!

EN, SP, FR

1105DTSMDTJEIN

KW-XC410/KW-XC400

Installation/Connection Manual

Manual de instalación/conexión

Manuel d’installation/raccordement

GET0320-002B

[J]

1105DTSMDTJEIN

EN, SP, FR

ENGLISH

ESPAÑOL

This unit is designed to operate on 12 V DC, NEGATIVE ground

electrical systems. If your vehicle does not have this system, a

Esta unidad está diseñada para funcionar con 12 V de CC, con

sistemas eléctricos de masa NEGATIVA. Si su vehículo no posee

voltage inverter is required, which can be purchased at JVC car audio este sistema, será necesario un inversor de tensión, que puede ser

dealers.

adquirido en los concesionarios de JVC de equipos de audio para

automóviles.

Parts list for installation and connection

The following parts are provided for this unit. After checking them,

please set them correctly.

Flat countersunk screws—M5 × 8 mm (M5 × 3/8")

Tornillos de cabeza avellanada plana—M5 × 8 mm (M5 × 3/8 pulgada)

Vis plat à tête fraisée—M5 × 8 mm (M5 × 3/8 pouces)

Power cord

Cordón de alimentación

Cordon d’alimentation

Pile

Binding screws—M5 × 8 mm (M5 × 3/8")

Tornillos de fijación—M5 × 8 mm (M5 × 3/8 pulgada)

Vis de serrage—M5 × 8 mm (M5 × 3/8 pouces)

Battery

Pila

Remote controller

Control remoto

Télécommade

Plate for use with a Nissan car

Placa para usar con un automóvil Nissan

Plaque à utiliser avec une voiture Nissan

When installating the unit in a Nissan car

Cuando instale la unidad en un automóvil Nissan

Lors de l’installation de l’appareil dans une

voiture Nissan

Plate for use with a Nissan car

Placa para usar con un automóvil Nissan

Plaque à utiliser avec une voiture Nissan

Fix the supplied plate as illustrated.

Fije la placa suministrada de la manera indicada en la ilustración.

Fixez la plaque fournie comme montré sur l’illustration.

PRECAUTIONS on power supply and speaker

connections:

• DO NOT connect the speaker leads of the power cord to the

car battery; otherwise, the unit will be seriously damaged.

• BEFORE connecting the speaker leads of the power cord to the

speakers, check the speaker wiring in your car.

TROUBLESHOOTING

LOCALIZACION DE AVERIAS

EN CAS DE DIFFICULTES

• The fuse blows.

* Are the red and black leads connected correctly?

• El fusible se quema.

* ¿Están los conductores rojo y negro correctamente conectados?

• Le fusible saute.

* Les fils rouge et noir sont-ils racordés correctement?

• Power cannot be turned on.

* Is the yellow lead connected?

• No es posible conectar la alimentación.

* ¿Está el cable amarillo conectado?

• L’appareil ne peut pas être mise sous tension.

* Le fil jaune est-elle raccordée?

• No sound from the speakers.

* Is the speaker output lead short-circuited?

• No sale sonido de los altavoces.

• Pas de son des enceintes.

* Le fil de sortie d’enceinte est-il court-circuité?

¿Está el cable de salida del altavoz cortocircuitado?

• Sound is distorted.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded in common?

• El sonido presenta distorsión.

• Le son est déformé.

* ¿Está el cable de salida del altavoz conectado a masa?

* ¿Están los terminales “–” de los altavoces L y R conectados a una

masa común?

* Le fil de sortie d’enceinte est-il à la masse?

* Les bornes “–” des enceintes gauche et droit sont-elles mises ensemble

à la masse?

• Noise interfere with sounds.

* Is the rear ground terminal connected to the car’s chassis using

shorter and thicker cords?

• Perturbación de ruido.

* ¿El terminal de tierra trasero está conectado al chasis del automóvil

utilizando los cordones más corto y más grueso?

• Interférence avec les sons.

* La prise arrière de mise à la terre est-elle connectée au châssis de la

voiture avec un cordon court et épais?

• This unit becomes hot.

* Is the speaker output lead grounded?

• La unidad se calienta.

• L’appareil devient chaud.

* Are the “–” terminals of L and R speakers grounded in common?

* ¿Está el cable de salida del altavoz conectado a masa?

* ¿Están los terminales “–” de los altavoces L y R conectados a una

masa común?

* Le fil de sortie d’enceinte est-il à la masse?

* Les bornes “–” des enceintes gauche et droit sont-elles mises ensemble

à la masse?

• This unit does not work at all.

* Have you reset your unit?

• Este receptor no funciona en absoluto.

•

* ¿Reinicializó el receptor?

INSTALLATION

INSTALACION (MONTAJE EN EL

TABLERO DE INSTRUMENTOS)

INSTALLATION (MONTAGE

DANS LE TABLEAU DE BORD)

(IN-DASH MOUNTING)

The following illustration shows a typical installation. However, you

should make adjustments corresponding to your specific car. In this

case consult the manual included with the installation kit (option).

In some case, depending of the type and the model of your car, it is

not possible to install the unit into the center console. If you have any posible que no se pueda instalar esta unidad en la consola central.

questions or require information regarding installation kits, consult

your JVC car audio dealers or a company supplying kits.

La siguiente ilustración muestra una instalación típica. Sin embargo, deberá L’illustration suivante est un exemple d’installation typique.

realizar los ajustes que correspondan a su automóvil. En tal caso, consulte el Cependant, vous devez réaliser les ajustements correspondant à

manual entregado con el kit de instalación (opción).

En algunos casos, y dependiendo del tipo y modelo de su automóvil, es

votre propre voiture. Dans ce cas, consultez le manuel fourni avec le

kit d’installation (optionnel). Dans certains cas, en fonction du type

de modèle de votre voiture, il n’est pas possible d’installer l’appareil

Si tiene alguna pregunta o necesita información acerca de las herramientas dans la console centrale. Si vous avez des questions ou avez besoin

para instalación, consulte con su concesionario de JVC de equipos de audio d’information sur des kits d’installation, consulter votre revendeur

• If you are not sure how to install this unit correctly, have it installed para automóviles o a una compañía que suministra tales herramientas.

by a qualified technician.

d’autoradios JVC ou une compagnie d’approvisionnement

• Si l’on n’est pas sûr de pouvoir installer correctement cet appareil, le

faire installer par un technicien qualifié.

• Si usted no está seguro de cómo instalar correctamente la unidad,

hágala instalar por un técnico cualificado.

Before installing the unit

• When mounting the unit, be sure to use the screws provided, as

instructed. If other screws are used, there is a possibility that parts

could become loose or damaged.

Antes de instalar la unidad

• Al instalar la unidad, asegúrese de usar los tornillos suministrados, tal • Lors du montage de l’appareil, assurez-vous d’utiliser les vis fournies

como se especifica. Si utiliza otros tornillos, puede suceder que las

piezas se aflojen o dañen.

• Al apretar los tornillos o los pernos, tenga cuidado de no pillar

ningún cable de conexión.

Avant d’installer l’appareil

de la façon indiquée. Si vous utilisez d’autres vis, certaines pièces

peuvent devenir lâches ou être endommagées.

• Lors du serrage de vis ou de boulons, faites attention de ne pas pincer

de cordon de connexion.

• When tightening screws or bolts be careful not to pinch any

connection cord.

1 Remove the audio system originally installed together with the

mounting brackets.

1 Desmonte el sistema de audio instalado originalmente junto con

los soportes de montaje.

1 Retirez le système audio d’origine installé en même temps que les

supports de montage.

Note: Be sure to keep all the screws and parts removed from

your car for future use.

Nota: Asegúrese de guardar todos los tornillos y piezas quitados

de su vehículo para poderlos usar en el futuro.

Remarque: Assurez-vous de conserver toutes les vis et pièces détachées

de votre voiture pour une utilisation dans le future.

2 Attach the mounting brackets (removed from the car), to this

2 Fije los soportes de montaje (removidos del vehículo) a esta unidad 2 Fixez les supports de montage (retirés de la voiture) à cet appareil

unit (see below).

(véase abajo).

(voir ci-dessous).

3 Connect the wires (see diagram ).

3 Conecte los cables (véase el diagrama ).

3 Connectez le fils (voir le diagramme ).

4 Fix this unit to the car using the screws removed in step 1.

Fije esta unidad al automóvil usando los tornillos quitados en el paso 1. 4 Fixez cet appareil à la voiture en utilisant les vis retirées à l’étape 1.

• See “Caution” below.

• Véase “Precaución” más abajo.

• Référez-vous aux “Précautions” ci-dessous.

The following example shown is for installation in a Toyota

car. For more details, consult your JVC car audio dealer.

El ejemplo siguiente muestra la instalación de un automóvil

Toyota. Para mayor información, consulte con su concesionario installation dans une voiture Toyota. Pour plus de détails,

Les exemples montrés ci-dessous correspondent à une

car audio JVC.

consultez votre revendeur autoradio JVC.

Screws supplied for this unit

Tornillos suministrados para esta unidad

Vis fournis avec cet appareil

Mounting bracket removed from the car

Soporte de montaje removido del automóvil

Support de montage retiré de la voiture

Securely connect the ground wire to the metal body of the car

using the screw originally fixed to the metal body of the car.

Conecte firmemente el cable de tierra a la carrocería metálica

del automóvil usando el tornillo instalado originalmente en la

misma.

Connectez solidement le fil de mise à la masse au châssis

métallique de la voiture en utilisant une vis fixée à l’origine au

châssis métallique de la voiture.

Mounting bracket removed from the car

Soporte de montaje removido del automóvil

Support de montage retiré de la voiture

Screws supplied for this unit

Tornillos suministrados para esta unidad

Screw removed from the car in step 1

Tornillo removido del automóvil en el paso 1

Vis retiré de la voiture à l’étape 1

Vis fournis avec cet appareil

Screws supplied for this unit:

Tornillos suministrados para esta unidad:

Vis fournis avec cet appareil:

Select the proper screw type, fitting to your car.

Binding screws—M5 × 8 mm (M5 × 3/8")

Tornillos de fijación—M5 × 8 mm (M5 × 3/8 pulgada)

Vis de serrage—M5 × 8 mm (M5 × 3/8 pouces)

Flat countersunk screws—M5 × 8 mm (M5 × 3/8")

Tornillos de cabeza avellanada plana

—M5 × 8 mm (M5 × 3/8 pulgada)

Seleccione el tipo de rosca correcto, adecuado a su automóvil.

Choisissez le type de vis correct, en fonction de votre voiture.

Vis plat à tête fraisée—M5 × 8 mm (M5 × 3/8 pouces)

Precaución:

Précautions:

Caution:

Para instalar los soportes de montaje en la unidad, utilice solamente

los tornillos suministrados—M5 × 8 mm (M5 × 3/8 pulgada).

l uso de cualquier tornillo de más de 8 mm (3/8 pulgada), de largo

puede producir daños a la unidad.

Pour installer les supports de montage sur l’appareil, utilisez

uniquementles vis fournis—M5 × 8 mm (M5 × 3/8 pouces).

Si vous utilisez une vis plus longue que 8 mm (3/8 pouces),

l’appareil peut être endommagé.

To install the mounting brackets to the unit, use only the

suppliead screws—M5 × 8 mm (M5 × 3/8"). If you use any

screw longer than 8 mm (3/8"), the unit can be damaged.

Install the unit at an angle of less than 30°.

Instale la unidad a un ángulo de menos de 30˚.

Installez l’appareil avec un angle de moins de 30˚.

If there is an interfering tab on the mounting bracket, bent it flat.

Si hay alguna lengüeta que interfiere con el soporte de montaje, dóblela hasta

que quede plana.

S’il y a une languette gênante sur le support de montage, aplatissez-la.

Less than 30˚

Menos de 30˚.

Moins de 30˚.

ELECTRICAL CONNECTIONS

To prevent short circuits, we recommend that you disconnect the

CONEXIONES ELECTRICAS

RACCORDEMENTS ELECTRIQUES

Para evitar cortocircuitos, recomendamos que desconecte el terminal Pour éviter tout court-circuit, nous vous recommandons de débrancher

battery’s negative terminal and make all electrical connections before negativo de la batería y que efectúe todas las conexiones eléctricas

la borne négative de la batterie et d’effectuer tous les raccordements

électriques avant d’installer l’appareil.

installing the unit.

antes de instalar la unidad.

• Be sure to ground this unit to the car’s chassis again after

installation.

• Asegúrese de volver a conectar a masa esta unidad al chasis

del automóvil después de la instalación.

• Assurez-vous de raccorder de nouveau la mise à la masse de

cet appareil au châssis de la voiture après l’installation.

Notes:

Notas:

Remarques:

• Replace the fuse with one of the specified rating. If the fuse blows

frequently, consult your JVC car audio dealer.

• If noise is a problem...

• Reemplace el fusible por uno con la corriente especificada. Si el

fusible se quemase frecuentemente consulte con su concesionario

de JVC de equipos de audio para automóviles.

• Remplacer le fusible par un de la valeur précisée. Si le fusible saute

souvent, consulter votre revendeur d’autoradios JVC.

• Si du bruit se produit...

This unit incorporates a noise filter in the power circuit. However,

with some vehicles, clicking or other unwanted noise may occur. If

this happens, connect the unit’s rear ground terminal to the car’s

chassis using shorter and thicker cords, such as copper braiding or

gauge wire. If noise still persists, consult your JVC car audio dealer.

• It is recommended to connect to the speakers with maximum

power of more than 50 W (both at the rear and at the front, with an

impedance of 4 Ω to 8 Ω). If the maximum power is less than

50 W, change “AMP GAIN” setting to prevent the speakers from

being damaged (see page 22 of the INSTRUCTIONS).

• The heat sink becomes very hot after use. Be careful not to touch it

when removing this unit.

• Si el ruido es un problema...

Cet appareil intègre un filtre anti-bruit dans le circuit d’alimentation.

Cependant, avec certains véhicules, un clic ou un autre bruit gênant

peut se produire. Si cela se produit, connectez la prise de mise à la

masse située à l’arrière de l’appareil au châssis de la voiture en

utilisant un cordon court et épais, tel qu’une tresse en cuivre ou un fil

de calibrage. Si le bruit persiste, consultez votre revendeur autoradio

JVC.

• Il est recommandé de connecter des enceintes avec une puissance de

plus de 50 W (les enceintes arrière et les enceintes avant, avec une

impédance comprise entre 4 Ω et 8 Ω). Si la puissance maximum est

inférieure à 50 W, changez “AMP GAIN” pour éviter d’endommager

vos enceintes (voir page 22 du MANUAL D’INSTRUCTIONS).

• Le dissipateur de chaleur devient très chaud après usage. Faire

attention de ne pas le toucher en retirant cet appareil.

Esta unidad incorpora un filtro de ruido en el circuito de

alimentación. Sin embargo, en algunos vehículos, pueden

producirse chasquidos u otros ruidos indeseables. En tal caso,

conecte el terminal de tierra trasero de la unidad al chasis

del automóvil utilizando cables más cortos y gruesos, como por

ejemplo, cables de cobre estañado o conductor. Si los ruidos

persisten, consulte con su concesionario car audio JVC.

• Se recomienda conectar los altavoces con una potencia máxima

de más de 50 W (tanto atrás como adelante, con una impedancia

de 4 Ω a 8 Ω). Si la potencia máxima es de menos de 50 W, cambie

“AMP GAIN” para evitar daños en los altavoces (consulte la página 22

del MANUAL DE INSTRUCCIONES).

Rear view

• El sumidero térmico estará muy caliente después del uso. Asegúrese

de no tocarlo al desmontar esta unidad.

Vista trasera

Vue arrière

Heat sink

Sumidero térmico

Dissipateur de chaleur

ENGLISH

ESPAÑOL

FRANÇAIS

Typical connections / Conexiones tipicas / Raccordements typiques

Before connecting: Check the wiring in the vehicle carefully.

Antes de la conexión: Verifique atentamente el conexionado del

Avant de commencer la connexion: Vérifiez attentivement

Incorrect connection may cause serious damage to this unit.

vehículo. Una conexión incorrecta podría producir daños graves en la le câblage du véhicule. Une connexion incorrecte peut endommager

The leads of the power cord and those of the connector from the car unidad.

body may be different in color.

sérieusement l’appareil.

Los cordones del cable de alimentación y los del conector procedentes Le fil du cordon d’alimentation et ceux desconnecteurs du châssis de la

de la carrocería del automóvil podrían ser de diferentes en color.

voiture peuvent être différents en couleur.

1 Connect the colored leads of the power cord in the order

1 Connectez les fils colorés du cordon d’alimentation dans l’ordre

1 Conecte los conductores de color del cable de alimentación en el

specified in the illustration below.

spécifié sur l’illustration ci-dessous.

orden especificado en la ilustración de abajo.

2 Connect the antenna cord.

3 Finally connect the wiring harness to the unit.

2 Connectez le cordon d’antenne.

2 Conecte el cable de antena.

3 Finalement, connectez le faisceau de fils à l’appareil.

3 Por último, conecte el cable de alimentación a la unidad.

To steering wheel remote

15 A fuse

Fusible de 15 A

Fusible 15 A

controller (see diagram

A los control remoto del volante

de dirección (véase el diagra

Aux télécommande de volant

(voir le diagramm

)

Line out (see diagram

Salida de línea (véase

)

diagrama

Sortie de ligne (voir le

diagramme

)

Not supplied for this unit.

No suministrado con esta unidad.

Non fourni avec cet appareil.

Ignition switch

Interruptor de encendido

Interrupteur d’allumage

)

To external component

(see diagram

A los componentes externos

(véase el diagrama

Aux appareils extérieurs

(voir le diagramme

)

Black

Negro

Noir

)

To metallic body or chassis of the car

A un cuerpo metálico o chasis del automóvil

)

Vers corps métallique ou châssis de la voiture

Yellow*²

Amarillo*²

Jaune*²

To a live terminal in the fuse block connecting to the car battery (bypassing the

ignition switch) (constant 12 V)

A un terminal activo del bloque de fusibles conectado a la batería del automóvil

(desviando el interruptor de encendido) (12 V constantes)

A une borne sous tension du porte-fusible connectée à la batterie de la voiture

(en dérivant l’interrupteur d’allumage) (12 V constant)

Red

Rojo

Rouge

Before checking the operation of this unit prior to installation,

this lead must be connected, otherwise power cannot be turned

on.

Antes de comprobar el funcionamiento de esta unidad previa a

de la instalación, es necesario conectar este cable, de lo contrario

no se podrá conectar la alimentación.

Pour vérifier le fonctionnement de cet appareil avant installation,

ce fil doit être raccordé, sinon l’appareil ne peut pas être mis sous

tension.

To an accessory terminal in the fuse block

A un terminal accesorio del bloque de fusibles

Vers borne accessoire du porte-fusible

Fuse block

Bloque de fusibles

Porte-fusible

Blue with white stripe

Azul con rayas blancas

Bleu avec bande blanche

To the remote lead of other equipment or automatic antenna if any (200 mA max.)

Al conductor remoto de otro equipo o de la antena automática, si hubiere

(máx. 200 mA)

Au fil de télécommande de l’autre appareil ou à l’antenne automatique s’il y en a une

(200 mA max.)

Orange with white stripe

Naranja con rayas blancas

Orange avec bande blanche

To car light control switch

Al interruptor de control de las luces del automóvil

À l’interrupteur d’éclairage de la voiture

White with black stripe

Blanco con rayas negras

Blanc avec bande noire

White

Blanco

Blanc

Gray with black stripe

Gris con rayas negras

Gris avec bande noire

Gray

Gris

Green with black stripe

Verde con rayas negras

Vert avec bande noire

Green

Verde

Vert

Purple with black stripe

Púrpura con rayas negras

Violet avec bande noire

Purple

Púrpura

Violet

Left speaker (front)

Altavoz izquierdo (delantero)

Right speaker (front)

Altavoz derecho (delantero)

Left speaker (rear)

Altavoz izquierdo (trasero)

Right speaker (rear)

Altavoz derecho (trasero)

Enceinte gauche (avant)

Enceinte droit (avant)

Enceinte gauche (arrière)

Enceinte droit (arrière)

Connecting the external amplifier / Conexión al amplificador externo / Connexion d’un amplificateur extérieur

You can connect amplifiers to upgrade your car stereo system.

Vous pouvez connecter des amplificateurs pour améliorer votre

système autoradio.

• Connectez le fil de commande à distance (bleu avec bande blanche)

au fil de commande à distance de l’autre appareil de façon qu’il

puisse être commandé via cet appareil.

Usted podrá conectar amplificadores para mejorar el sistema estéreo

de su automóvil.

• Conecte el conductor remoto (azul con rayas blancas) al conductor

remoto del otro equipo para poderlo controlar a través de esta

unidad.

• Connect the remote lead (blue with white stripe) to the remote

lead of the other equipment so that it can be controlled through

this unit.

• Disconnect the speakers from this unit, connect them to the

amplifier. Leave the speaker leads of this unit unused.

• Déconnectez les enceintes de cet appareil et connectez-les

à l’amplificateur. Laissez les fils d’enceintes de cet appareil

inutilisés.

• Desconecte los altavoces de esta unidad y conéctelos al

amplificador. Los cables de los altavoces de esta unidad

quedan sin usar.

Remote lead

Cable remoto

Y-connector (not supplied for this unit)

Conector en Y (no suministrado con esta unidad)

Firmly attach the ground wire to the metallic body

or to the chassis of the car—to the place uncoated

with paint (if coated with paint, remove the paint

before attaching the wire). Failure to do so may

cause damage to the unit.

Fije firmemente el cable de tierra a la carrocería

metálica o al chasis—a un lugar no cubierto

con pintura (si está cubierto con pintura, quítela

antes de fijar el cable). De lo contrario, se podrían

producir daños en la unidad.

Attachez solidement le fil de mise à la masse au

châssis métallique de la voiture—à un endroit qui

n’est pas recouvert de peinture (s’il est recouvert

de peinture, enlevez d’abord la peinture avant

d’attacher le fil). L’appareil peut être endommagé si

cela n’est pas fait correctement.

Fil d’alimentation à distance

Connecteur Y (non fourni avec cet appareil)

Remote lead (Blue with white stripe)

Cable remoto (Azul con rayas blancas)

Rear speakers

Altavoces posteriores

Enceintes arrière

To the remote lead of other equipment or

automatic antenna if any

Al conductor remoto de otro equipo o de

la antena automática, si hubiere

Au fil de télécommande de l’autre appareil

ou à l’antenne automatique s’il y en a une

Fil d’alimentation à distance

(Bleu avec bande blanche)

JVC Amplifier

Amplificador de JVC

JVC Amplificateur

Front speakers

Altavoces delanteros

Front speakers

Altavoces delanteros

Enceintes avant

JVC Amplifier

Amplificador de JVC

JVC Amplificateur

Signal cord (not supplied for this unit)

Cable de señal (no suministrado con esta unidad)

Cordon de signal (non fourni avec cet appareil)

Connecting to the steering wheel remote controller / Conexión al control remoto del volante de dirección / Connexion de la télécommande

de volant

Steering wheel remote input

Entrada del control remoto del volante de dirección

Entrée de la télécommande de volant

OE remote adapter (not supplied)

If your car is equipped with the steering wheel remote controller, you can operate this unit using the controller. To

do it, a JVC’s OE remote adapter (not supplied) which matches with your car is required. Consult your JVC car

audio dealer for details.

Adaptador para control remoto OE (no suministrado)

Adaptateur pour télécommande au volant (non fourni)

Si su vehículo está equipado con control remoto en el volante de dirección, podrá hacer funcionar este receptor

utilizando dicho control. Para ello, se requiere un adaptador para control remoto OE de JVC (no suministrado) que

corresponda con su vehículo. Para mayor información, consulte con su concesionario car audio de JVC.

Si votre voiture est munie d’une télécommande de volant, vous pouvez commander cet autoradio en utilisant la

télécommande. Pour le faire, un adaptateur pour télécommande au volant JVC (non fourni) correspondant à votre

voiture est nécessaire. Consultez votre revendeur d’autoradio JVC pour les détails.

Steering wheel remote controller (equipped in the car)

Control remoto del volante de dirección (equipado en el vehículo)

Télécommande de volant (installée dans la voiture)

Connecting other external components / Conexión de otros componentes externos / Connexion d’un autre appareil extérieur

• Set “EXT INPUT” to “CHANGER” (See page 22 of the INSTRUCTIONS.) / Ajuste “EXT INPUT” a “CHANGER” (Consulte la página 22 del MANUAL DE INSTRUCCIONES.) / Réglez “EXT INPUT” sur “CHANGER” (Voir la

page 22 du MANUEL D’INSTRUCTIONS.)

JVC CD changer, SIRIUS Satellite radio, XM Satellite radio, Apple iPod®, or JVC D. player / Cambiador de CD de JVC, radio satelital SIRIUS, radio satelital XM,

iPod® de Apple o reproductor JVC D. / Changeur de CD JVC, radio satellite SIRIUS, radio satellite XM, iPod® Apple ou lecteur D. JVC

You can connect these components in series as illustrated below.

• For listening to the SIRIUS Satellite radio, connect a JVC DLP

—Down Link Processor (separately purchased) to this unit.

• The iPod*⁵ or D. player can be connected using an interface

adapter (not supplied)—KS-PD100 (for iPod) or KS-PD500 (for

D. player).

Vous pouvez connecter ces appareils en série comme montrée sur

l’illustration.

Estos componentes se pueden conectar en serie, tal como se muestra

en la ilustración de abajo.

•

Pour écouter la radio satellite SIRIUS, connectez un processeur DLP JVC

—Processeur de signaux satellite-terre (vendu séparément) à cet appareil.

• Para escuchar la radio satelital SIRIUS, conecte un DLP (Down Link

Processor) de JVC (adquirido por separado) al receptor.

• Puede conectar el iPod*⁵o el reproductor D. usando un adaptador

de interfaz (no suministrado)—KS-PD100 (para iPod) o KS-PD500

(para el reproductor D.).

• Le iPod*⁵ou le lecteur D. peut être connecté en utilisant un

adaptateur d’interface (non fourni)—KS-PD100 (pour iPod) ou

KS-PD500 (pour le lecteur D.).

Apple iPod (separately purchased)

Apple iPod (adquirido separadamente)

iPod Apple (vendu séparément)

JVC D. player (separately purchased)

Reproductor D. JVC (adquirido

separadamente)

JVC DLP

DLP JVC

Processeur DLP JVC

JVC CD changer

Cambiador de CD de JVC

Changeur de CD JVC

Lecteur D. JVC (vendu séparément)

CD changer jack

Jack para el cambiador

de CD

Prise du changeur CD

• For listening to the XM Satellite radio, you can also connect XMDirect Universal Tuner Box (separately purchased) through this unit using JVC

Smart Digital Adapter—XMDJVC100 (not supplied).

• Para escuchar la radio satelital XM, también puede conectar el Sintonizador universal XMDirect™ (adquirido por separado) al receptor mediante un

adaptador Smart Digital XMDJVC100 de JVC (no suministrado).

• Pour écouter la radio satellite XM, vous pouvez aussi connecter le tuner universel XMDirect (vendu séparément) à cet appareil en utilisant l’adaptateur

numérique intelligent JVC—XMDJVC100 (non fourni).

Antenna (supplied with XMDirect Universal Tuner Box)

Antena (suministrada con el Sintonizador universal XMDirect™)

Antenne (fournie avec le tuner universel XMDirect

)

To CD changer, KS-PD100,

or KS-PD500

Al cambiador de CD,

KS-PD100 o KS-PD500

Au changeur de CD,

KS-PD100 ou KS-PD500

XMDirect Universal Tuner Box

Sintonizador universal XMDirect™

Tuner universel XMDirect

Apple iPod (separately purchased)

Apple iPod (adquirido separadamente)

iPod Apple (vendu séparément)

JVC DLP

DLP JVC

Processeur DLP JVC

JVC CD changer

Cambiador de CD de JVC

Changeur de CD JVC

JVC D. player (separately purchased)

Reproductor D. JVC (adquirido

separadamente)

CD changer jack

Jack para el cambiador

de CD

Prise du changeur CD

Lecteur D. JVC (vendu séparément)

Antenna (supplied with XMDirect Universal Tuner Box)

Antena (suministrada con el Sintonizador universal XMDirect™)

Antenne (fournie avec le tuner universel XMDirect

)

XMDirect Universal Tuner Box

Sintonizador universal XMDirect™

Tuner universel XMDirect

iPod is a trademark of Apple Computer, Inc.,

CAUTION / PRECAUCION / PRECAUTION:

registered in the U.S. and other countries.

iPod es una marca comercial de Apple

Computer, Inc., registrada en los EE.UU. y

otros países.

iPod est une marque de commerce d’Apple

Computer, Inc., enregistrée aux États-Unis et

dans les autres pays.

• Before connecting the external components,

make sure that the unit is turned off.

Signal cord supplied with your JVC

CD changer or DLP

Cable de señal suministrado con su

cambiador de CD o DLP JVC

Cordon de signal fourni avec votre

changeur de CD ou processeur DLP JVC

Signal cord supplied with your

Smart Digital Adapter

Cable de señal suministrado con

el adaptador Smart Digital

Cordon de signal fourni avec votre

adaptateur numérique intelligent

Audio signal cord supplied with

your Smart Digital Adapter

Cable de señal de audio suministrado

con el adaptador Smart Digital

Cordon audio fourni avec votre

adaptateur numérique intelligent

• Antes de conectar los componentes externos,

asegúrese de que la unidad esté apagada.

• Avant de connecter les appareils extérieurs,

assurez-vous que l’appareil est hors tension.

• Set “EXT INPUT” to “EXT INPUT” (See page 22 of the INSTRUCTIONS.) / Ajuste “EXT INPUT” a “EXT INPUT” (Consulte la página 22 del MANUAL DE INSTRUCCIONES.) / Réglez “EXT INPUT” sur “EXT INPUT” (Voir

la page 22 du MANUEL D’INSTRUCTIONS.)

JVC PnP (Plug and Play) / PnP (“Plug and Play”) JVC / PnP (“Plug and Play”) JVC

Stereo mini plug

Miniclavija estéreo

Fiche stéré mini

To headphones jack

Al jack para auriculares

À la prise du casque d’écoute

You can also connect JVC PnP through this unit using JVC SIRIUS radio adapter,

KS-U100K (not supplied).

• Turning on/off the unit can also turns on/off the JVC PnP.

También podrá conectar la PnP JVC a través de este receptor utilizando el adaptador

para radio SIRIUS JVC, KS-U100K (no suministrado).

CD changer jack

Jack para el cambiador de CD

Prise du changeur CD

• Al encender/apagar el receptor también se enciende/apaga la PnP JVC.

Vous pouvez aussi connecter le PnP JVC à cet autoradio en utilisant l’adaptateur de

radio SIRIUS JVC KS-U100K (non fourni).

DC power plug

Clavija de alimentación de CC Al jack DC IN

To DC IN jack

•

Mettre sous/hors tension l’autoradio peut aussi mettre sous/hors tension le PnP JVC.

Fiche d’alimentation CC À la prise DC IN

Other external component / Otro componente externo / Autre appareil extérieur

External component

Componente exterior

Appareil extérieur

CD changer jack

Jack para el cambiador de CD

External component

Line Input Adapter KS-U57 (not supplied for this unit)

Adaptador de entrada de línea KS-U57 (no suministrado con esta unidad)

Adaptateur d’entrée de ligne KS-U57 (non fourni avec cet appareil)

Prise du changeur CD

Componente exterior

Appareil extérieur

3.5 mm stereo mini plug

Miniclavija estéreo de 3,5 mm

Mini fiche stéréo de 3,5 mm

¹⁰AUX Input Adapter KS-U58 (not supplied for this unit)

¹⁰Adaptador de entrada AUX KS-U58 (no suministrado con esta unidad)

¹⁰Adaptateur d’entrée AUX KS-U58 (non fourni avec cet autoradio)

Morphy Richards 47061 User Manual
Maxtor MaxAttach NAS 4000 Series User Manual
LG Electronics VX5500 User Manual
Kenwood KDC MP235CR User Manual
JVC KD S711R User Manual
JVC FSUN KD S636 User Manual
Grindmaster 70752 C User Manual
Cuisinart PG 25144C User Manual
Centon electronic DataStick Designer DSD2GB 008 User Manual
Atlantis Land DiskMaster A06 HDE102 User Manual