JVC KD SX9350 User Manual

CD RECEIVER

KD-SX9350/KD-SX990

RECEPTOR CON CD

RECEPTEUR CD

KD-SX9350

ATT

SOUND

SOURCE

VOL

KD-SX990

ATT

SOUND

SOURCE

VOL

For installation and connections, refer to the separate manual.

Para la instalación y las conexiones, refiérase al manual separado.

Pour l’installation et les raccordements, se référer au manuel séparé.

For customer Use:

Enter below the Model No. and

Serial No. which are located on

the top or bottom of the

cabinet. Retain this information

for future reference.

INSTRUCTIONS

MANUAL DE INSTRUCCIONES

MANUEL D’INSTRUCTIONS

Model No.

Serial No.

GET0123-001A

[J]

Thank you for purchasing a JVC product. Please read all instructions carefully before operation,

to ensure your complete understanding and to obtain the best possible performance from the unit.

CONTENTS

How to reset your unit ...............................

How to use the MODE button ...................

MP3 OPERATIONS ......................... 18

Playing an MP3 disc ................................. 18

Locating a file or particular portion

LOCATION OF THE BUTTONS ............

Control panel.............................................

Remote controller......................................

Preparing the remote controller ................

on an MP3 disc....................................... 19

Selecting MP3 playback modes ................ 21

SOUND ADJUSTMENTS ................... 23

Selecting preset sound modes

BASIC OPERATIONS .......................

Turning on the power ................................

Setting the clock........................................

(C-EQ: custom equalizer) ....................... 23

Adjusting the sound .................................. 24

OTHER MAIN FUNCTIONS ................ 25

Changing the general settings (PSM) ....... 25

Assigning names to the sources ............... 29

Detaching the control panel ...................... 30

RADIO OPERATIONS ......................

Listening to the radio.................................

Storing stations in memory ....................... 10

Tuning in to a preset station ...................... 11

CD CHANGER OPERATIONS .............. 31

Playing discs ............................................. 31

Selecting the playback modes .................. 34

CD OPERATIONS ........................... 12

Playing a CD ............................................. 12

Locating a track or a particular portion

on a CD .................................................. 13

Selecting CD playback modes .................. 14

Playing a CD Text ...................................... 15

Prohibiting disc ejection ............................ 15

EXTERNAL COMPONENT OPERATIONS ... 36

Playing an external component................. 36

TROUBLESHOOTING ...................... 37

MAINTENANCE ............................. 40

MP3 INTRODUCTION ...................... 16

What is MP3?............................................ 16

How are MP3 files recorded and

Handling discs........................................... 40

SPECIFICATIONS ........................... 41

played back? .......................................... 16

How to use the MODE button

If you press MODE, the unit goes into functions mode (“MODE” flashes on the upper part of the

display). While in function mode, the number buttons and 5/∞ buttons work as different function

buttons.

Ex.: When number button 2 works as MO (monaural) button.

MO (monaural)

indicator lights up.

Time countdown

indicator

To use these buttons for original functions again after pressing MODE, wait for 5 seconds

without pressing any of these buttons until the functions mode is cleared (“MODE” disappears from

the display).

• Pressing MODE again also clears the functions mode.

LOCATION OF THE BUTTONS

Control panel

Display window

s d

3 4

6 7

9p q

;

(standby/on/attenuator) button

; EQ (equalizer) button

2 5 (up) button

a Auxiliary input jack (MP3 INPUT)

+10 button

3 4

/¢

buttons

Display window

s Disc information indicators

TAG (ID3 Tag),

d CD–in indicator

f Main display

g Playback item indicators

(disc), (folder)

h Source/clock display

j EQ (equalizer) indicator

k Sound mode (C-EQ: custom equalizer)

indicators

ROCK, CLASSIC, POPS, HIP HOP, JAZZ,

USER

l LOUD (loudness) indicator

/ Tuner reception indicators

MO (monaural), ST (stereo)

z MP3 indicator

x Volume (or audio) level indicator

Equalizer pattern indicator

c Playback mode indicators

RND (random), RPT (repeat), INT (intro)

4 Remote sensor

5 Display window

6 0 (eject) button

7 FM/AM button

(folder),

(track/file)

8 CD (CD-CH: CD changer) button

(control panel release) button

p ∞ (down) button

–10 button

q SEL (select) button

w Control dial

e MO (monaural) button

r Number buttons

t INT (intro) button

y RPT (repeat) button

u RND (random) button

i MODE button

• Also functions as SSM buttons when pressed

together with DISP (display) button.

o DISP (display) button

• Also functions as SSM buttons when pressed

together with MODE button.

3 • Selects the preset stations while listening to

the radio.

Remote controller

Each time you press the button, the preset

station number increases, and the selected

station is tuned in.

• Skips to the first file of the previous folder

while listening to an MP3 disc.

Each time you press the button, you can

move to the previous folder and start playing

the first file.

ATT

SOUND

• While playing an MP3 disc on an MP3-

compatible CD changer;

– Skips to the previous disc if pressed

briefly.

SOURCE

– Skips to the previous folder if pressed and

held.

Note: While playing a CD on a CD changer, this

always skips to the previous disc.

VOL

4 Functions the same as the control dial on the

main unit.

Note: These buttons do not function for the

preferred setting mode adjustment.

1 • Turns on the unit if pressed when the unit is

turned off.

5 Selects the sound mode (C-EQ: custom

equalizer).

• Turns off the unit if pressed and held until

“SEE YOU” appears on the display.

• Drops the volume level in a moment if

pressed briefly.

Each time you press the button, the sound

mode (C-EQ) changes.

6 Selects the source.

Press again to resume the volume.

Each time you press the button, the source

changes.

2 • Selects the band while listening to the radio.

Each time you press the button, the band

changes.

7 • Searches for stations while listening to the

radio.

• Skips to the first file of the next folder while

listening to an MP3 disc.

Each time you press the button, you can

move to the next folder and start playing the

first file.

• Fast-forwards or reverses the track/file if

pressed and held while listening to a disc.

• Skips to the beginning of the next track/file

or goes back to the beginning of the current

(or previous) tracks/files if pressed briefly

while listening to a disc.

• While playing an MP3 disc on an MP3-

compatible CD changer;

– Skips to the next disc if pressed briefly.

– Skips to the next folder if pressed and

held.

Note: While playing a CD on a CD changer, this

always skips to the next disc.

3. Return the battery holder.

Insert again the battery holder by pushing it

until you hear a clicking sound.

Preparing the remote controller

Before using the remote controller:

• Aim the remote controller directly at the remote

sensor on the main unit. Make sure there is no

obstacle in between.

Remote sensor

(back side)

WARNING:

• Store the battery in a place where children

cannot reach.

If a child accidentally swallows the battery,

consult a doctor immediately.

• Do not expose the remote sensor to strong

light (direct sunlight or artificial lighting).

• Do not recharge, short, disassemble, or heat the

battery or dispose of it in a fire.

Doing any of these things may cause the battery

to give off heat, crack, or start a fire.

• Do not leave the battery with other metallic

materials.

Installing the battery

When the controllable range or effectiveness of

the remote controller decreases, replace the

battery.

Doing this may cause the battery to give off

heat, crack, or start a fire.

• When throwing away or saving the battery,

wrap it in tape and insulate; otherwise, the

battery may start to give off heat, crack, or start

a fire.

1. Remove the battery holder.

1) Push out the battery holder in the direction

indicated by the arrow using a ball-point

pen or a similar tool.

2) Remove the battery holder.

• Do not poke the battery with tweezers or similar

tools.

Doing this may cause the battery to give off

heat, crack, or start a fire.

(back side)

CAUTION:

DO NOT leave the remote controller in a place

(such as dashboards) exposed to direct sunlight for

a long time. Otherwise, it may be damaged.

2. Place the battery.

Slide the battery into the holder with the +

side facing upwards so that the battery is

fixed in the holder.

Lithium coin

battery (product

number: CR2025)

BASIC OPERATIONS

Volume level appears.

Turning on the power

1 Turn on the power.

Volume (or audio) level indicator

(see page 27)

Note on One-Touch Operation:

When you select a source in step 2 below, the

power automatically comes on. You do not have

to press this button to turn on the power.

4 Adjust the sound as you want. (See

pages 23 and 24.)

2 Select the source.

To drop the volume in a moment

Press

briefly while listening to any

source. “ATT” starts flashing on the display, and

the volume level will drop in a moment.

To resume the previous volume level, press the

button briefly again.

• If you turn the control dial, you can also restore

the sound.

To operate the tuner (FM or AM),

see pages 9 – 11.

To play a CD,

see pages 12 – 15.

To play an MP3 disc,

see pages 18 – 22.

To operate the CD changer,

see pages 31 – 35.

To turn off the power

Press and hold

second.

“SEE YOU” appears, then the unit turns off.

• If you turn off the power while listening to a

disc, disc play will start from where playback

has been stopped previously, next time you

turn on the power.

for more than one

To operate the external component

(LINE IN or AUX IN), see page 36.

3 Adjust the volume.

To increase the volume

CAUTION on Volume Setting:

Discs produce very little noise compared with

other sources. If the volume level is adjusted for

the tuner, for example, the speakers may be

damaged by the sudden increase in the output

level. Therefore, lower the volume before playing a

disc and adjust it as required during playback.

To decrease the volume

2 Adjust the minute.

Setting the clock

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see page 26.)

4 Finish the setting.

2 Set the hour.

1 Select “CLOCK H” (hour) if not shown on

the display.

Note:

To show the clock time on the display, see page 27.

To check other information during play, press

DISP (display).

2 Adjust the hour.

Each time you press the button, the other

information will be shown on the upper part of

the display. (See page 27 for details.)

• Pressing DISP (display) with the unit turned off

will show the clock time for about 5 seconds.

3 Set the minute.

1 Select “CLOCK M” (minute).

RADIO OPERATIONS

To stop searching before a station is

received, press the same button you have

pressed for searching.

Listening to the radio

You can use either automatic searching or manual

searching to tune in to a particular station.

Searching a station manually:

Manual search

Searching a station automatically:

Auto search

1 Select the band (FM1 – 3, AM).

Each time you press the

button, the band changes as

follows:

1 Select the band (FM1 – 3, AM).

Each time you press the

button, the band changes as

follows:

FM 1

(F1)

FM 2

(F2)

FM 3

(F3)

A M

FM 1

(F1)

FM 2

(F2)

FM 3

(F3)

A M

Selected band appears*.

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to

an FM broadcast.

2 Press and hold ¢

or 4

Lights up when receiving an FM stereo

broadcast with sufficient signal strength.

until “MANU” (manual) starts

flashing on the display.

* When “CLOCK” is set to “ON” (see page 27),

the current indication will soon change to the

clock time.

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to

an FM broadcast.

2 Start searching a station.

To search stations of

higher frequencies

To search stations of lower frequencies

CONTINUED ON THE NEXT PAGE

When a station is received, searching stops.

Storing stations in memory

3 Tune in to a station you want while

“MANU” (manual) is flashing.

You can use one of the following two methods to

store broadcasting stations in memory.

• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

To tune in to stations

of higher frequencies

• Manual preset of both FM and AM stations

To tune in to stations of lower frequencies

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM

band (FM1, FM2, and FM3).

• If you release your finger from the button,

the manual mode will automatically turns

off after 5 seconds.

• If you hold down the button, the frequency

keeps changing (in 200 kHz intervals for

FM and 10 kHz for AM) until you release

the button.

1 Select the FM band (FM1 – 3) you

want to store FM stations into.

Each time you press the

button, the band changes as

follows:

When an FM stereo broadcast is hard to

receive:

FM 1

(F1)

FM 2

(F2)

FM 3

(F3)

A M

1 Press MODE to enter the functions

mode while listening to an FM

stereo broadcast.

“MODE” flashes on the upper part

of the display.

2 Press and hold both buttons for

more than 2 seconds.

2 Press MO (monaural), while

“MODE” is still flashing on the

display, so that the MO indicator

lights up on the display.

Each time you press the button, the

MO indicator lights up and goes off

alternately.

“- -SSM- -” appears, then disappears

when automatic preset is over.

Local FM stations with the strongest signals are

searched and stored automatically in the band

number you have selected (FM1, FM2, or FM3).

These stations are preset in the number buttons—

No.1 (lowest frequency) to No.6 (highest

frequency).

MO (monaural) indicator

When the MO indicator is lit on the display, the

sound you hear becomes monaural but the

reception will be improved.

When automatic preset is over, the station stored

in number button 1 will be automatically tuned in.

Manual preset

You can preset up to 6 stations in each band

(FM1, FM2, FM3, and AM) manually.

4 Repeat the above procedure to store

other stations into other preset

numbers.

Ex.: Storing an FM station of 88.3 MHz into the

preset number 1 of the FM1 band.

Notes:

• A previously preset station is erased when a new

station is stored in the same preset number.

• Preset stations are erased when the power supply to

the memory circuit is interrupted (for example,

during battery replacement). If this occurs, preset

the stations again.

1 Select the band (FM1 – 3, AM) you

want to store stations into (in this

example, FM1).

Each time you press the

button, the band changes as

follows:

Tuning in to a preset station

FM 1

(F1)

FM 2

(F2)

FM 3

(F3)

A M

You can easily tune in to a preset station.

Remember that you must store stations first. If

you have not stored them yet, see “Storing

stations in memory” on pages 10 and 11.

2 Tune in to a station (in this example,

of 88.3 MHz).

To tune in to stations

of higher frequencies

1 Select the band (FM1 – 3, AM).

Each time you press the

button, the band changes as

follows:

To tune in to stations of lower frequencies

FM 1

(F1)

FM 2

(F2)

FM 3

(F3)

A M

2 Select the number (1 – 6) for the

preset station you want.

3 Press and hold the number button

(in this example, 1) for more than

2 seconds.

Note:

You can also use the 5 (up) or ∞ (down) button on

the unit to select the next or previous preset stations.

Each time you press the 5 (up) or ∞ (down) button,

the next or previous preset station is tuned in.

Selected band/preset number

and “MEMO” (memory)

appear alternately for a while.

CD OPERATIONS

The display changes to show the following:

Current source

indication*

Refer “MP3 OPERATIONS” on pages 18 to 22 for

operating MP3 discs.

CD–in indicator

Playing a CD

1 Open the control panel.

Total track number

of the inserted disc

Total playing time

of the inserted disc

Note on One-Touch Operation:

When a CD is already in the loading slot,

pressing CD (CD-CH) turns on the unit and

starts playback automatically.

Elapsed playing time Current track

2 Insert a CD into the loading slot.

The unit turns on,

draws the CD and

starts playback

automatically.

* When “CLOCK” is set to “ON” (see page 27),

the current indication will soon change to the

clock time.

3 Close the control panel by hand.

Notes:

• When a CD is inserted upside down, the CD

automatically ejects (if the control panel is open).

If the control panel is closed, the source changes to

the tuner, “PLEASE” and “EJECT” appear

alternately on the display.

All tracks will be played repeatedly until you

stop playback.

• When you open the control panel by pressing 0, the

CD automatically ejects.

• If there is no CD in the loading slot, you cannot

select CD as the source. “NO DISC” appears on

the display.

• If the disc is a CD Text, disc title/performer and

then track title will automatically appear.

To stop play and eject the CD

To go to a particular track directly

Press 0.

Press the number button corresponding to the

track number to start its playback.

CD play stops and the control panel flips down.

The CD automatically ejects from the loading

slot. The source changes to the previously

selected source.

• If you change the source, CD play also stops

(without ejecting the CD).

Next time you select “CD” as the source, CD

play starts from where playback has been

stopped previously.

• To select a track number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• To select a track number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than one

second.

Notes:

• If the ejected disc is not removed for about

15 seconds, the disc is automatically inserted again

into the loading slot to protect it from dust.

(Disc play will not start this time.)

• You can eject the disc even when the unit is turned

off.

To go to a track quickly (+10 and –10

buttons)

Press MODE to enter the functions mode

while playing a CD.

“MODE” flashes on the upper

part of the display.

Locating a track or a

particular portion on a CD

Press +10 or –10.

To fast-forward or reverse the track

Press and hold ¢

while playing a CD, to

fast-forward the track.

To skip 10 tracks* forwards

to the last track

To skip 10 tracks* backwards

to the first track

Press and hold 4

reverse the track.

, while playing a CD, to

* The first time you press +10 or –10 button,

the track skips to the nearest higher or

lower track with a track number of multiple

ten (ex. 10th, 20th, 30th).

Then each time you press the button, you can

skip 10 tracks (see “How to use the +10 and

–10 buttons” on page 14).

To go to the next or previous tracks

Press ¢

briefly,

while playing a CD, to go

ahead to the beginning of

the next track.

Each time you press the

button consecutively, the

beginning of the next

tracks is located and

played back.

• After the last track, the first track will be

selected, and vice versa.

Press 4

briefly, while playing a CD, to go

back to the beginning of the current track.

Each time you press the button consecutively,

the beginning of the previous tracks is located

and played back.

CONTINUED ON THE NEXT PAGE

To play back tracks repeatedly

(Track Repeat Play)

How to use the +10 and –10 buttons

• Ex. 1: To select track number 32 while

You can play back the current track repeatedly.

playing track number 6

1 Press MODE to enter the functions

mode while playing a CD.

“MODE” flashes on the upper part

of the display.

(Three times)

(Twice)

\ 31 \ 32

2 Press RPT (repeat), while “MODE”

is still flashing on the display, so that

the “TRK RPT” appears on the

display.

Each time you press the button,

track repeat play mode turns on

and off alternately.

Track 6

\ 10 \ 20 \ 30

• Ex. 2: To select track number 8 while playing

track number 36

(Three times)

(Twice)

Track 36 \ 30 \ 20 \ 10

\ 9 \ 8

RPT indicator

Selecting CD playback modes

When track repeat play is turned on, the RPT

indicator lights up on the display. The current

track starts playing repeatedly.

To play back tracks at random

(Disc Random Play)

You can play back all tracks on the CD at random.

To play back only intros

(Track Intro Scan)

You can play back the first 15 seconds of each

track sequentially.

1 Press MODE to enter the functions

mode while playing a CD.

“MODE” flashes on the upper part

of the display.

1 Press MODE to enter the functions

mode while playing a CD.

“MODE” flashes on the upper part

of the display.

2 Press RND (random), while

“MODE” is still flashing on the

display, so that “DISC RND”

appears on the display.

Each time you press the button,

disc random play mode turns on

and off alternately.

2 Press INT (intro), while “MODE” is

still flashing on the display, so that

“TRK INT” appears on the display.

Each time you press the button,

track intro scan mode turns on and

off alternately.

(disc) and RND indicators

When disc random play is turned on, the

and RND indicators light up on the display. A

track randomly selected starts playing.

INT indicator

When track intro scan is turned on, the INT

indicator lights up on the display. The first 15

seconds of each track is played sequentially.

Playing a CD Text

Prohibiting disc ejection

In a CD Text, some information about the disc (its

disc title, performer, and track title) is recorded.

This CD Text information will be shown

You can prohibit disc ejection and can lock a disc

in the loading slot.

automatically when you play a CD Text.

While pressing CD (CD-CH), press and

hold

for more than 2 seconds.

To change the CD Text information

manually, select text display mode while

playing a CD Text.

Each time you press the button,

the display changes as follows:

“NO EJECT” flashes on the display for about

5 seconds, and the disc is locked and cannot be

ejected.

Disc title / performer

Track title

(

lights up on the display)

Elapsed playing time and

Current track number

To cancel the prohibition and unlock the disc

While pressing CD (CD-CH), press and hold

again for more than 2 seconds.

“EJECT OK” flashes on the display for about

5 seconds, and the disc is unlocked.

Notes:

• The display shows up to 8 characters at a time and

scrolls if there are more than 8 characters.

See also “To select the scroll mode—SCROLL” on

page 28.

Some characters or symbols will not be shown (and

be blanked) on the display.

(Ex. “ABCå!d#” ]“ABCA D ”)

• When you press DISP (display) while playing a

conventional CD, “NO NAME” appears for the

disc title/performer and the track title.

MP3 INTRODUCTION

Precautions when recording MP3 files

What is MP3?

on a CD-R or CD-RW

MP3 is an abbreviation of Motion Picture Experts

Group (or MPEG) Audio Layer 3. MP3 is simply a

file format with a data compression ratio of 1:10

(128 Kbps*). That means, by using MP3 format,

one CD-R or CD-RW can contain 10 times as

much data volume as a regular CD can.

This unit can only read MP3 files that are

recorded in the format that is compliant with ISO

9660 Level 1, Level 2, or Joliet.

How are MP3 files recorded

and played back?

* Bit rate is the average number of bits that one

second of audio data will consume. The unit

used is Kbps (1024 bits/second). To get a better

audio quality, choose a higher bit rate. The

most popular bit rate for encoding is 128 Kbps.

MP3 “files (tracks)” can be recorded in “folders”

—in PC terminology.

During recording, the files and folders can be

arranged in a way similar to arranging files and

folders of computer data.

“Root” is similar to the root of a tree. Every file

and folder can be linked to and be accessed from

the root.

This unit is incorporated with an MP3 decoder.

You can play back MP3 files (tracks) recorded on

CD-Rs, CD-RWs, and CD-ROMs.

Compatible with ID3v1 (Version 1)

Extra information data such as album title,

performer name, song title, recording year, music

genre and a brief comment can be stored within

an MP3 file.

Playback order, file search order, and folder

search order of the MP3 files recorded on a disc

are determined by the writing (or encoding)

application; therefore, playback order may be

different from the one you have intended while

recording the folders and the files.

This unit can show ID3v1 (Version 1) tags (album

name, performer name, and song title) on the

display. (See page 19.)

The illustration on the next page shows an

example of how MP3 files are recorded on a

CD-R or CD-RW, how they are played back, and

how they are searched for on this unit.

• Some characters cannot be shown correctly.

• This unit is not compatible with ID3v2

(Version 2).

Other main features in this unit:

• Maximum number of folders/files:

289 (Total)

• Available characters for folder/file names:

A–Z, 0–9, _ (underscore)

• Maximum number of characters for file name

(ISO 9660 Level 1): 12 (inclusive of

separation mark—“.”

and extension code

—“mp3”)

(ISO 9660 Level 2): 31 (inclusive of

separation mark—“.”

Notes:

• The unit can read a CD-ROM containing MP3 files.

However, if non-MP3 files are recorded together

with MP3 files, this unit will take a longer time to

scan the disc. It may also cause the unit to

malfunction.

• The unit cannot read or play an MP3 file without

the extension code—mp3.

• This player is not compatible with the data encoded

with Layer 1 and Layer 2 formats.

• The unit is not compatible with Playlist**.

and extension code

—“mp3”)

**A playlist is a simple text file, used on a PC, which

enables users to make their own playback order

without physically rearranging the files.

(Joliet):

64 (inclusive of

separation mark

—“.” and extension

code—“mp3”)

• Maximum number of characters for folder

name: 64

MP3 folder/file configuration

ROOT

: Root

: Folders

: MP3 files

ROOT

Note:

There is no limit on the number of the hierarchy levels (nested folders). However, up to 8 hierarchy levels is

recommanded for stable operations.

MP3 playback/search order

• The numbers in circles below the MP3 files ( ) indicate the playback order and search order of

the MP3 files. Normally this unit plays back MP3 files in the recorded order.

• The numbers inside the folders indicate the playback order and search order of the folders on an

MP3 disc. Normally this unit plays back MP3 files in the folders in the recorded order.

MP3 OPERATIONS

Refer also to “CD OPERATIONS” on pages

12 to 15.

The display changes to show the following:

Current source

indication*

CD–in indicator

Playing an MP3 disc

1 Open the control panel.

Note on One-Touch Operation:

When a disc is already in the loading slot,

pressing CD (CD-CH) turns on the unit and

starts playback automatically.

Total folder

number

Total file

number

2 Insert an MP3 disc into the loading

slot.

The unit turns on,

draws the disc and

starts playback

automatically.

MP3 indicator

Ex.: When the disc contains 19 folders and

144 MP3 files

* When “CLOCK” is set to “ON” (see page 27),

the current indication will soon change to the

clock time.

3 Close the control panel by hand.

Notes:

• MP3 discs require a longer readout time.

(It differs due to the complexity of the folder/file

configuration.)

• When playback starts, folder and file names (or ID3

tags) will automatically appears. (See also page 19.)

• If you change the source or turn the power off, disc

playback stops (without ejecting the disc).

Next time you select the CD player as the source or

turn the power on, disc play starts from where

playback has been stopped previously.

All files will be played repeatedly until you

stop playback.

To stop play and eject the disc

Press 0.

Playback stops and the control panel flips down.

The disc automatically ejects from the loading

slot.

Locating a file or particular

portion on an MP3 disc

For “MP3 playback/search order” see page 17.

To fast-forward or reverse the file

Press and hold ¢

To change the display information

While playing back an MP3 file,

you can change MP3 disc

information shown on the display.

Each time you press DISP

(display), the display changes to

show the following:

while playing an MP3 disc,

to fast-forward the file.

Press and hold 4

while playing an MP3

disc, to reverse the file.

• When “TAG DISP” is set to “TAG ON”

(initial setting: see page 28)

To skip to the next or previous files

Press ¢

briefly

while playing, to skip

ahead to the beginning of

the next file.

Album name / performer

(folder name*)

(TAG lights up on the display)

Each time you press the

button consecutively, the

beginning of the next files

is located and played

back.

Track title (file name*)

(TAG lights up on the display)

Elapsed playing time and

Current file number

Press 4

briefly, while playing, to skip back

to the beginning of the current file.

Each time you press the button consecutively,

the beginning of the previous files is located and

played back.

* If an MP3 file does not have ID3 tags, folder

name and file name appear. In this case, the

TAG indicator will not lights up on the display.

• When“TAG DISP”is set to“TAG OFF”

Folder name

(

lights up on the display)

File name

lights up on the display)

Elapsed playing time and

Current file number

Note:

The display shows up to 8 characters at a time and

scrolls if there are more than 8 characters.

See also “To select the scroll mode—SCROLL” on

page 28.

To go to a particular file quickly within the

current folder (+10 and –10 buttons)

To go to a particular folder directly

IMPORTANT:

Press MODE to enter the functions mode

while playing an MP3 disc.

“MODE” flashes on the upper

part of the display.

To directly select the folders using the number

button(s), it is required that folders are

assigned 2 digit numbers at the beginning of

their folder names. (This can only be done

during the recording of CD-Rs or CD-RWs.)

Ex.: If folder name is “01 ABC”

= Press 1 to go to Folder 01 ABC.

If folder name is “1 ABC,” pressing 1

does not work.

Press +10 or –10.

To skip 10 files* forwards

to the last file

If folder name is “12 ABC”

= Press and hold 6 (12) to go to Folder

12 ABC.

To skip 10 files* backwards

to the first file

Press the number button corresponding to the

folder number to start playing the first file in the

selected folder.

* The first time you press +10 or –10 button,

the file skips to the nearest higher or lower

file with a file number of multiple ten (ex.

10th, 20th, 30th).

Then, each time you press the button, you

can skip 10 files (see “How to use the +10

and –10 buttons” below).

• After the last file, the first file will be

selected, and vice versa.

• To select a folder number from 01 – 06:

Press 1 (7) – 6 (12) briefly.

• To select a folder number from 07 – 12:

Press and hold 1 (7) – 6 (12) for more than one

second.

How to use the +10 and –10 buttons

• Ex. 1: To select file number 32 while playing

Notes:

file number 6

• If “MP3” flashes on the display after you have

selected a folder, it means that the folder does not

contain any MP3 files.

• You cannot directly select a folder with a number

greater than 12.

(Three times)

(Twice)

File 6

\ 10 \ 20 \ 30 \ 31 \ 32

To select a particular file in a folder, press

• Ex. 2: To select file number 8 while playing

or 4

after selecting the folder.

file number 36

(Three times)

(Twice)

File 36

\ 30 \ 20 \ 10 \ 9 \ 8

To skip to the next or previous folder

Selecting MP3 playback modes

To play back files at random

(Folder Random/Disc Random Play)

You can play back all files of the current folder or

all files on the MP3 disc at random.

Press 5 (up) while playing an

MP3 disc to skip to the next

folder.

Each time you press the button

consecutively, the next folder is

located (and the first file in the

folder starts playing, if recorded).

1 Press MODE to enter the functions

mode while playing an MP3 disc.

“MODE” flashes on the upper part

of the display.

Press ∞ (down) while playing an

MP3 disc to skip back to the

previous folder.

Each time you press the button

consecutively, the previous

folder is located (and the first file

in the folder starts playing, if

recorded).

2 Press RND (random), while

“MODE” is still flashing on the

display, so that “FLDR RND” or

“DISC RND” appears on the display.

Each time you press the button, the

random play mode changes as

follows:

Note:

FLDR RND

DISC RND

If the folder does not contain any MP3 files, it is

skipped.

Canceled

(folder) and RND indicators

Ex.: When you select “FLDR RND”

Active

indicator

Mode

Plays at random

FLDR RND

and RND All files of the

indicators

light up.

current folder, then

files of the next

folder and so on.

DISC RND

and RND All files on the disc.

indicators

light up.

To play back files repeatedly

(Track Repeat/Folder Repeat Play)

To play back only intros

(Track Intro Scan/Folder Intro Scan)

You can play back the current file or all the files

in the current folder repeatedly.

You can play back the first 15 seconds of each

file sequentially.

1 Press MODE to enter the functions

mode while playing an MP3 disc.

“MODE” flashes on the upper part

of the display.

1 Press MODE to enter the functions

mode while playing an MP3 disc.

“MODE” flashes on the upper part

of the display.

2 Press RPT (repeat), while “MODE”

is still flashing on the display, so

that “TRK RPT” or “FLDR RPT”

appears on the display.

2 Press INT (intro), while “MODE” is

still flashing on the display, so that

“TRK INT” or “FLDR INT” appears

on the display.

Each time you press the button, the

repeat play mode changes as

follows:

Each time you press the button, the

intro scan mode changes as

follows:

TRK RPT

FLDR RPT

TRK INT

FLDR INT

Canceled

RPT indicator

INT indicator

Ex.: When you select “TRK INT”

Ex.: When you select “TRK RPT”

Active

indicator

Active

indicator

Plays the beginnings

(15 seconds) of

Mode

Plays repeatedly

Mode

TRK RPT RPT indicator The current (or

TRK INT INT indicator All files of the current

lights up.

specified) file.

lights up.

disc.

FLDR RPT

and RPT All files of the

FLDR INT

and INT

indicators

light up.

The first file of every

folders of the current

disc.

indicators

light up.

current (or

specified) folder.

SOUND ADJUSTMENTS

Indication

For:

Preset values

BAS TRE LOUD

Selecting preset sound modes

(C-EQ: custom equalizer)

USER

ROCK

(Flat sound)

OFF

Rock or

disco music

+03

+01

You can select a preset sound mode (C-EQ:

custom equalizer) suitable to the music genre.

CLASSIC Classical

music

+01

–02

OFF

Select the sound mode you want.

When you press the button

once, the last selected sound

mode is recalled and applied

to the current source.

POPS

Light music

+04

+01

OFF

HIP HOP Funk or rap +02

music

JAZZ

Jazz music

+02

+03

OFF

Note:

You can adjust each sound mode to your preference.

Once you make an adjustment, it is automatically

stored for the currently selected sound mode. See

“Adjusting the sound” on page 24.

Sound mode indicator flashes.

Ex.: If you have selected “USER” previously

Then, each time you press the

button, the sound modes

change as follows:

USER

JAZZ

ROCK

CLASSIC

POPS

HIP HOP

Sound mode indicator flashes.

Ex.: When you select “ROCK”

When you adjust the bass, treble, or loudness, the

adjustment you have made is stored for the currently

selected sound mode (C-EQ) including “USER.”

If you are using a two-speaker system, set the fader

level to “00.”

Adjusting the sound

You can adjust the sound characteristics to your

preference.

Only for KD-SX9350:

1 Select the item you want to adjust.

Each time you press the

This takes effect only when a subwoofer is

connected.

Normally the control dial work as the volume

control. So you do not have to select “VOL” to

adjust the volume level.

button, the adjustable items

change as follows:

For KD-SX9350:

2 Adjust the setting.

BAS

TRE

FAD

BAL

(bass)

(treble)

(fader)

(balance)

To increase the level or

turn on the loudness

VOL

WOOFER

LOUD

(subwoofer)

(loudness)

(volume)

To decrease the level or

turn off the loudness

For KD-SX990:

BAS

TRE

FAD

(bass)

(treble)

(fader)

VOL

LOUD

BAL

(volume)

(loudness)

(balance)

Indication

To do:

Range

Equalization pattern changes as

you adjust the bass or treble.

BAS*¹

TRE*¹

FAD*²

BAL

Adjust the bass. –06 (min.)

Ex. 1: When you adjust “TRE” (treble)

+06 (max.)

Adjust the treble. –06 (min.)

+06 (max.)

Adjust the front

and rear speaker

balance.

R06 (Rear only)

Ex. 2: When you turn on the loudness

F06 (Front only)

Adjust the left

and right speaker

balance.

L06 (Left only)

3 Repeat steps 1 and 2 to adjust the

other items.

R06 (Right only)

LOUD*¹

Boost low and

high frequencies

to produce a well-

balanced sound

at low volume

level.

To reset each sound mode to the factory

settings, repeat the same procedure and

reassign the preset values listed in the table on

page 23.

LOUD ON

LOUD OFF

WOOFER*³Adjust the

(only for subwoofer

KD-SX9350) output level.

0 (min.)

8 (max.)

VOL*⁴

Adjust the volume. 00 (min.)

50 (max.)

OTHER MAIN FUNCTIONS

Changing the general settings

(PSM)

3 Adjust the PSM item selected.

You can change the items listed on the next page

by using the PSM (Preferred Setting Mode)

control.

Basic Procedure

4 Repeat steps 2 and 3 to adjust the

other PSM items if necessary.

1 Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(See page 26.)

5 Finish the setting.

2 Select the PSM item you want to

adjust. (See page 26.)

Ex.: When you select “LEVEL”

Preferred Setting Mode (PSM) items

Factory-preset See

Set...

settings

page

Counter-

clockwise

Hold...

Select...

Clockwise

Advance

CLOCK H

CLOCK M

CLOCK

Hour adjustment

Minute adjustment

Clock display

Back

1:00

Advance

OFF

AUDIO 1

AUDIO 2

LEVEL

Level display

AUDIO 2

OFF

DIMMER

Dimmer mode

AUTO

OFF

AUTO

BEEP

Key-touch tone

Scroll mode

OFF

SCROLL

ONCE

AUTO

ONCE

OFF

EXT IN*

External component

Auxiliary level adjustment

Tag display

CHANGER

LINE IN

CHANGER

A. ADJ 00

TAG ON

AUX ADJ

TAG DISP

A. ADJ 00 – A. ADJ 05

TAG OFF TAG ON

• Press SEL (select) to finish the setting.

* Displayed only when one of the following sources is selected—FM, AM, and CD.

To set the clock display—CLOCK

To select the level meter—LEVEL

You can set the clock to be shown on the display

when the unit is turned on.

You can select the level display according to your

preference.

When shipped from the factory, the clock is set to

be shown on the display.

When shipped from the factory, “AUDIO 2” is

selected.

• ON:

• OFF:

Clock display is turned on.

Clock display is turned off. When

“OFF” is selected, the current

source name or station band

appears instead of the clock display

(except when “LINE IN” is selected

as the source).

• AUDIO 1: Shows the audio level indicator.

• AUDIO 2: Alternates “AUDIO 1” setting and

illumination display.

• OFF:

Erases the audio level indicator.

To select the dimmer mode—DIMMER

When you turn on the car head lights, the display

automatically dims (Auto Dimmer).

When shipped from the factory, Auto Dimmer

mode is activated.

When CLOCK is set to OFF:

Current

Source

Pressing DISP (display)

indication

• AUTO:

• OFF:

• ON:

Activates Auto Dimmer.

Cancels Auto Dimmer.

Always dims the display.

Tuner

Band

Clock appears for about

5 seconds.

CD and “CD” or

CD-CH disc number

Note:

Auto Dimmer equipped with this unit may not work

correctly on some vehicles, particularly on those

having a control dial for dimming.

When CLOCK is set to ON:

Current

In this case, set the dimmer mode to “ON” or “OFF.”

Source

Pressing DISP (display)

To turn on/off the key-touch tone—BEEP

indication

You can deactivate the key-touch tone if you do

not want it to beep each time you press a button.

When shipped from the factory, the key-touch

tone is activated.

Tuner

Clock

Band appears for about

5 seconds.

CD and Clock

CD-CH

“CD” or disc number

and track/file number

appear alternately

each time you press the

button.

• ON:

Activates the key-touch tone.

Deactivates the key-touch tone.

• OFF:

To select the scroll mode—SCROLL

To turn the tag display on or off

—TAG DISP

An MP3 file can contain file information called

“ID3 Tag” where its album name, performer, track

title, etc. are recorded.

There are two versions–ID3v1 (ID3 Tag version 1)

and ID3v2 (ID3 Tag version 2). This unit is

compatible only with ID3v1.

When shipped from the factory, “TAG ON” is

selected.

You can select the scroll mode for the disc

information (when the entire text cannot be

shown all at once).

When shipped from the factory, scroll mode is set

to “ONCE.”

• ONCE:

• AUTO:

Scrolls only once.

Repeats the scroll (5-second

intervals in between).

Cancels Auto Scroll.

• OFF:

• TAG ON:

Turns on the ID3 tag display while

playing MP3 files.

• If an MP3 file does not have ID3

tags, folder name and file name

appear.

Note:

Even if the scroll mode is set to “OFF,” you can scroll

the display by pressing DISP (display) for more than

one second.

To select the external component to use

Note:

—EXT IN

If you change the setting from

“TAG OFF” to “TAG ON” while

playing an MP3 file, the tag display

will be activated when the next file

starts playing.

You can connect the external component to the

CD changer jack on the rear using the Line Input

Adapter KS-U57 (not supplied).

To use the external component as the playback

source through this unit, you need to select

which component—CD changer or external

component—to use.

• TAG OFF: Turns off the ID3 tag display while

playing MP3 files. (Only the folder

name and file name can be

shown.)

When shipped from the factory, CD changer is

selected as the external component.

• CHANGER: To use the CD changer.

• LINE IN:

To use the external component

other than CD changer.

Note:

For connecting the Line Input Adapter KS-U57 and

the external component, refer to the Installation/

Connection Manual (separate volume).

To adjust the auxiliary input level

—AUX ADJ

Adjust the auxiliary input level properly when an

external component is connected to the MP3

INPUT jack.

When shipped from the factory, the auxiliary

input level is set at level “00.”

If the input level of the connected component is

not high enough, increase the input level

properly. Without adjusting the line input level,

you may be surprised at a loud sound when you

change the source from the external component

to another source.

Assigning names to the sources

3 Select a character.

• See below for available

characters.

You can assign names to station frequencies and

CDs (both in this unit and in the CD changer).

After assigning a name, it will appear on the

display when you select the source.

Maximum number of

Sources

characters

4 Move the cursor to the next

(or previous) character position.

Station frequencies Up to 8 characters (up to

30 station frequencies

including both FM and AM)

CDs*

Up to 32 characters (up to

40 discs)

* You cannot assign a name to a CD Text or an MP3

disc.

5 Repeat steps 3 and 4 until you

finish entering the name.

6 Finish the procedure while the last

1 Select a source you want to assign a

selected character is flashing.

name to.

When you select a source, the

power automatically comes

on.

To erase the entered characters

Insert spaces using the same procedure

described above.

2 While pressing DISP (display), press

and hold SEL (select) for more than

2 seconds.

Available characters

–

space

Ex.: When you select CD as the source

Notes:

• When you try to assign a name to the 41st disc,

“NAME FULL” appears on the display. (In this

case, delete unwanted names before assignment.)

• When the CD changer is connected, you can assign

names to CDs in the CD changer. These names can

also be shown on the display if you insert the CDs

in this unit.

Attaching the control panel

Detaching the control panel

1 Insert the right side of the control

panel into the groove on the panel

holder.

You can detach the control panel when leaving

the car.

When detaching or attaching the control panel,

be careful not to damage the connectors on the

back of the control panel and on the panel

holder.

Detaching the control panel

Before detaching the control panel, be sure to

turn off the power.

1 Unlock the control panel.

2 Press the left side of the control

panel to fix it to the panel holder.

2 Pull the control panel out of the unit.

Note on cleaning the connectors:

If you frequently detach the control panel, the

connectors will deteriorate.

To minimize this possibility, periodically wipe the

connectors with a cotton swab or cloth moistened

with alcohol, being careful not to damage the

connectors.

3 Put the detached control panel into

the provided case.

Connectors

CD CHANGER OPERATIONS

We recommend that you use the JVC MP3-

* If you have changed “EXT IN” setting to “LINE IN”

compatible CD changer with your unit.

(see page 36), you cannot select the CD changer.

By using this CD changer, you can play back

your original CD-Rs (Recordable) and CD-RWs

(Rewritable) recorded either in audio CD format

or in MP3 format.

• When the current disc is an MP3 disc:

Playback starts from the first folder of the

current disc once file check is completed.

Selected disc number**

• You can also connect other CH-X series

CD changers (except CH-X99 and CH-X100).

However, they are not compatible with MP3

discs, so you cannot play back MP3 discs.

• You cannot use the KD-MK series CD

changers with this unit.

Before operating your CD changer:

• Refer also to the Instructions supplied with

your CD changer.

• If no discs are in the magazine of the CD

changer or the discs are inserted upside

down, “NO DISC” will appear on the display.

If this happens, remove the magazine and

set the discs correctly.

• If no magazine is loaded in the CD changer,

“NO MAG” appears on the display. If this

happens, insert the magazine in the CD

changer.

• If “RESET 1” – “RESET 8” appears on the

display, something is wrong with the

connection between this unit and the CD

changer. If this happens, check the

connection and make sure the cords are

connected firmly. Then, press the reset

button of the CD changer.

(folder) indicator

MP3 indicator

** When “CLOCK” is set to “ON” (see page 27),

the current indication will soon change to the

clock time.

Playing discs

Note:

Folder name appears on the display instead of

“ROOT,” if an MP3 disc contains a folder.

Select the CD changer (CD-CH).

CD-CH*

• When the current disc is a CD:

Playback starts from the first track of the

current disc.

To go to a particular disc directly

Press the number button corresponding to the

disc number to start its playback (while the

CD changer is playing).

Selected disc number*

• To select a disc number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• To select a disc number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than one

second.

Current track

number

Elapsed playing time

To fast-forward or reverse the track/file

Press and hold ¢

during play, to fast-forward

the track/file.

* When “CLOCK” is set to “ON” (see page 27),

the current indication will soon change to the

clock time.

Press and hold 4

the track/file.

, during play, to reverse

Notes:

To go to the next or previous tracks/files

• When you press CD (CD-CH), the power

automatically comes on. You do not have to press

to turn on the power.

• If you change the source, CD changer play also

stops. Next time you select the CD changer as the

source, CD changer play starts from where

playback has been stopped previously.

• When you start playing back a CD Text or MP3

disc, disc information will automatically appear on

the display. (See pages 15 and 19.)

Press ¢

briefly

during play, to skip ahead

to the beginning of the

next track/file.

Each time you press the

button consecutively, the

beginning of the next

tracks/files is located and

played back.

Press 4

briefly during play, to skip back to

the beginning of the current track/file.

Each time you press the button consecutively,

the beginning of the previous tracks/files is

located and played back.

To skip to the next or previous folder

(only for MP3 discs)

This operation is only possible when

using JVC MP3-compatible CD changer

(CH-X1500).

Press 5 (up) while playing an

MP3 disc, to go to the next

folder.

Each time you press the button

consecutively, the next folder is

located, and the first file in the

folder starts playback.

To go to a track/file quickly (+10 and –10

buttons)

1 Press MODE to enter the functions mode

while playing a disc.

“MODE” flashes on the upper

part of the display.

Press ∞ (down) while playing an

MP3 disc, to go to the previous

folder.

2 Press +10 or –10.

Each time you press the button

consecutively, the previous

folder is located, and the first file

in the folder starts playback.

To skip 10 tracks/files*

forwards to the last

track/file

To skip 10 tracks/files*

backwards to the first

track/file

To show the disc information for CD Text

and MP3 discs

This is possible only when connecting a JVC CD

changer equipped with CD Text and/or MP3 disc

information reading capability.

* The first time you press +10 or –10 button,

the track/file skips to the nearest higher or

lower track/file with a track/file number of

multiple ten (ex. 10th, 20th, 30th).

Then, each time you press the button, you

can skip 10 tracks/files (see “How to use the

+10 and –10 buttons” below).

Select text display mode while playing a

CD Text or an MP3 disc.

• After the last track/file, the first track/file will

be selected, and vice versa.

Note:

• For details, see page 15 about CD Text disc

information and page 19 about MP3 disc

information.

If the current playing disc is an MP3 disc, files are

skipped within the same folder.

How to use the +10 and –10 buttons

• Ex. 1: To select track/file number 32 while

playing track/file number 6

(Three times)

(Twice)

Track/File 6 \ 10 \ 20 \ 30 \ 31 \ 32

• Ex. 2: To select track/file number 8 while

playing track/file number 36

(Three times)

Track/File 36 \ 30 \ 20 \ 10 \ 9 \ 8

(Twice)

Active

indicator

Selecting the playback modes

Mode

Plays at random

To play back tracks/files at random

(Folder Random/Disc Random/Magazine

Random Play)

FLDR RND*

and RND All files of the

indicators

light up.

current folder, then

files of the next

folder and so on.

1 Press MODE to enter the functions

mode during play.

DISC RND

and RND All tracks/files of the

indicators

light up.

current (or specified)

disc.

“MODE” flashes on the upper part

of the display.

MAG RND RND indicator All tracks/files of the

lights up. inserted discs.

2 Press RND (random), while

“MODE” is still flashing on the

display.

* “FLDR RND” is only applicable for MP3 disc.

Each time you press the button, the

random play mode changes as

follows:

To play back tracks/files repeatedly

(Track Repeat/Folder Repeat/Disc Repeat

Play)

For MP3 discs:

FLDR RND

Canceled

DISC RND

MAG RND

1 Press MODE to enter the functions

mode during play.

“MODE” flashes on the upper part

of the display.

For CDs:

2 Press RPT (repeat), while “MODE”

is still flashing on the display.

Each time you press the button, the

repeat play mode changes as

follows:

DISC RND

MAG RND

Canceled

For MP3 discs:

TRK RPT

Canceled

FLDR RPT

DISC RPT

RND indicator

Ex.: When you select “MAG RND”

For CDs:

Note:

TRK RPT

DISC RPT

MP3 indicator also lights up if the current playing

disc is an MP3 disc.

Canceled

(disc) and RPT indicators

Ex.: When you select “DISC RPT”

Note:

MP3 indicator also lights up if the current playing

disc is an MP3 disc.

Active

indicator

Mode

Plays repeatedly

TRK RPT

RPT indicator The current (or

lights up.

specified) track/file.

FLDR RPT*

and RPT All files of the

INT indicator

Ex.: When you select “TRK INT”

indicators

light up.

current (or specified)

folder of the current

disc.

Note:

DISC RPT

and RPT All tracks/files of the

MP3 indicator also lights up if the current playing

indicators

light up.

current (or specified)

disc.

disc is an MP3 disc.

Active

indicator

Plays the beginnings

(15 seconds) of

Mode

* “FLDR RPT” is only applicable for MP3 disc.

TRK INT

INT indicator All tracks/files of the

lights up. current disc.

To play back only intros

(Track Intro Scan/Folder Intro Scan/Disc

Intro Scan)

FLDR INT*

DISC INT

and INT The first file of every

indicators

light up.

folders of the current

disc.

1 Press MODE to enter the functions

mode during play.

“MODE” flashes on the upper part

of the display.

and INT The first tracks/files of

indicators the inserted discs.

light up.

* “FLDR INT” is only applicable for MP3 disc.

2 Press INT (intro), while “MODE” is

still flashing on the display.

Each time you press the button, the

intro scan mode changes as

follows:

For MP3 discs:

TRK INT

FLDR INT

DISC INT

Canceled

For CDs:

TRK INT

DISC INT

Canceled

EXTERNAL COMPONENT OPERATIONS

*Not compatible with

digital signals.

Portable MP3 player, etc.

Auxiliary input

(MP3 INPUT)*

• If “LINE IN”* does not appear on the display,

see page 28 and select the external input

(“LINE IN”).

* Displayed only when one of the following sources is

selected—FM, AM, and CD.

Playing an external component

You can connect two external components to this

unit.

Connect one to the CD changer jack on the rear

using the Line Input Adapter KS-U57 (not

supplied), and the other to the MP3 INPUT jack

on the control panel.

To select “AUX IN” (component connected

to the MP3 INPUT jack on the control

panel), press and hold CD (CD-CH).

Preparations:

• For connecting the Line Input Adapter KS-U57 and

the external component, refer to the Installation/

Connection Manual (separate volume).

• Before operating the external component using the

following procedure, select the external input

correctly. See “To select the external component to

use—EXT IN” on page 28.

• If the input level of the external component

connected to the AUX jack is not high enough,

increase the input level properly. (See “To adjust the

auxiliary input level—AUX ADJ” on page 28.)

Note on One-Touch Operation:

When you press CD (CD-CH), the power

automatically comes on. You do not have to press

to turn on the power.

1 Select the external component

(LINE IN or AUX IN).

2 Turn on the connected component

and start playing the source.

To select “LINE IN” (component

connected to the CD changer jack on the

rear), press CD (CD-CH) repeatedly.

3 Adjust the volume.

LINE IN*

4 Adjust the sound characteristics

you want. (See pages 23 and 24.)

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service

center.

Symptoms

Causes

Remedies

• Sound cannot be heard

from the speakers.

The volume level is set to the

minimum level.

Adjust it to the optimum level.

Connections are incorrect.

Check the cords and

connections.

• This unit does not work

at all.

The built-in microcomputer may

have functioned incorrectly due

to noise, etc.

Press the reset button on the

panel holder after detaching the

control panel. (The clock setting

and preset stations stored in

memory are erased.)

(See page 2.)

• SSM (Strong-station

Sequential Memory)

automatic preset does

not work.

Signals are too weak.

Store stations manually.

• Static noise while

listening to the radio.

The antenna is not connected

firmly.

Connect the antenna firmly.

Insert the disc correctly.

• Disc cannot be played

back.

Disc is inserted upside down.

• CD-R/CD-RW cannot be CD-R/CD-RW is not finalized.

• Insert a finalized CD-R/

CD-RW.

• Finalize the CD-R/CD-RW

with the component which

you used for recording.

played back.

• Tracks on the CD-R/

CD-RW cannot be

skipped.

• Disc cannot be ejected.

Disc is locked.

Unlock the disc.

(See page 15.)

• Disc sound is sometimes You are driving on rough roads.

interrupted.

Stop playback while driving on

rough roads.

Disc is scratched.

Change the disc.

Connections are incorrect.

Check the cords and

connections.

• “NO DISC” appears on

the display.

No disc in the loading slot.

Disc is inserted incorrectly.

Insert a disc into the loading

slot.

Insert the disc correctly.

Symptoms

Causes

Remedies

• Disc cannot be played

back.

No MP3 files are recorded on Change the disc.

the disc.

MP3 files do not have the

Add the extension code

extension code—mp3 in their —mp3 to their file names.

file names.

MP3 files are not recorded in

Change the disc.

the format compliant with ISO (Record MP3 files using a

9660 Level 1, Level 2, or

Joliet.

compliant application.)

• Noise is generated.

The file played back is not an Skip to another file or change

MP3 file (although it has the

extension code—mp3).

the disc. (Do not add the

extension code—mp3 to non-

MP3 files.)

• A longer readout time is

required (“CHECK” keeps

flashing on the display).

Readout time varies due to

the complexity of the folder/file and folders. Also, do not record

configuration.

Do not use too many hierarchies

any other types of audio tracks

together with MP3 files.

• Files cannot be played back Playback order is determined

as you have intended them when the files are recorded.

to play.

• Elapsed playing time is not This sometimes occurs during

correct.

play. This is caused by how

the files are recorded on the

disc.

• “MP3” flashes on the

display.

The current folder does not

contain any MP3 file.

Select another folder.

• “NO FILES” appears on the The current disc does not

Insert a disc that contains MP3

files.

display.

contain any MP3 file.

• Correct characters are not

displayed (e.g. album

name).

This unit can only display

alphabets (capital: A–Z),

numbers, and a limited

number of symbols.

Symptoms

Causes

Remedies

• “NO DISC” appears on the

display.

No disc is in the magazine.

Insert discs into the

magazine.

Discs are inserted upside

down.

Insert discs correctly.

• “NO MAG” appears on the

display.

No magazine is loaded in the

CD changer.

Insert the magazine.

• “RESET 8” appears on the

display.

This unit is not connected to the Connect this unit and the

CD changer correctly.

CD changer correctly and

press the reset button of the

CD changer.

• “RESET 1” – “RESET 7”

appears on the display.

Press the reset button of the

CD changer.

• The CD changer does not

work at all.

The built-in microcomputer may Press the reset button on the

function incorrectly due to

noise, etc.

panel holder after detaching

the control panel. (The clock

setting and preset stations

stored in memory are

erased.) (See page 2.)

About mistracking:

Mistracking may result from driving on extremely rough roads. This does not damage the unit and the disc,

but will be annoying.

We recommend that you stop disc play while driving on such rough roads.

MAINTENANCE

Handling discs

When playing a CD-R or CD-RW

Before playing back CD-Rs or CD-RWs, read

their instructions or cautions carefully.

• Use only “finalized” CD-Rs or CD-RWs.

• Some CD-Rs or CD-RWs may not play back on

this unit because of their disc characteristics,

and for the following reasons:

This unit has been designed to reproduce CDs,

CD-Rs (Recordable), CD-RWs (Rewritable), and

CD Texts.

• This unit is also compatible with MP3 discs.

– Discs are dirty or scratched.

– Moisture condensation on the lens inside the

unit.

– The pickup lens inside the unit is dirty.

• CD-RWs may require a longer readout time

since the reflectance of CD-RWs is lower than

that of regular CDs.

• CD-Rs or CD-RWs are susceptible to high

temperatures or high humidity, so do not leave

them inside your car.

• Do not use following CD-Rs or CD-RWs:

– Discs with stickers, labels, or protective seal

stuck to the surface.

– Discs on which labels can be directly printed

by an ink jet printer.

How to handle discs

When removing a disc

from its case, press down

the center holder of the case

and lift the disc out, holding

it by the edges.

Center holder

• Always hold the disc by the edges. Do not

touch its recording surface.

When storing a disc into its case, gently insert

the disc around the center holder (with the

printed surface facing up).

• Make sure to store discs into the cases after

use.

To keep discs clean

Using these discs under high temperatures or

high humidity may cause malfunctions or

damage to discs. For example,

– Stickers or labels may shrink and warp a

disc.

– Stickers or labels may peel off so discs

cannot be ejected.

– Print on discs may get sticky.

A dirty disc may not play correctly.

If a disc does become dirty, wipe it

with a soft cloth in a straight line

from center to edge.

To play new discs

New discs may have some rough

spots around the inner and outer

edges. If such a disc is used, this

unit may reject the disc.

To remove these rough spots, rub

the edges with a pencil or ball-point pen, etc.

Read instructions or cautions about labels and

printable discs carefully.

CAUTIONS:

• Do not insert 8 cm (3-3/16") discs (single CDs)

into the loading slot. (Such discs cannot be

ejected.)

Moisture condensation

Moisture may condense on the lens inside the

CD player in the following cases:

• Do not insert any disc of unusual shape—like a

heart or flower; otherwise, it will cause a

malfunction.

• Do not expose discs to direct sunlight or any

heat source or place them in a place subject to

high temperature and humidity. Do not leave

them in a car.

• Do not use any solvent (for example,

conventional record cleaner, spray, thinner,

benzine, etc.) to clean discs.

• After starting the heater in the car.

• If it becomes very humid inside the car.

Should this occur, the CD player may

malfunction. In this case, eject the disc and leave

the unit turned on for a few hours until the

moisture evaporates.

Sticker

Stick-on

label

Warped

disc

Sticker

Disc

residue

SPECIFICATIONS

CD PLAYER SECTION

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Type: Compact disc player

Front:

Rear:

50 W per channel

Signal Detection System: Non-contact optical

pickup (semiconductor laser)

Continuous Power Output (RMS):

Number of channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20 000 Hz

Front:

19 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than

0.8% total harmonic distortion.

19 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than

0.8% total harmonic distortion.

Dynamic Range:

96 dB

Signal-to-Noise Ratio: 98 dB

Wow and Flutter: Less than measurable limit

MP3 decoding format:

Rear:

MPEG1/2 Audio Layer 3 Max.

Bit Rate: 320 Kbps

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)

Tone Control Range:

Bass:

Treble:

10 dB at 100 Hz

10 dB at 10 kHz

GENERAL

Power Requirement:

Frequency Response: 40 Hz to 20 000 Hz

Signal-to-Noise Ratio: 70 dB

Auxiliary input jack (MP3 INPUT):

3.5 mm dia. stereo mini jack (analog)

Line-Out Level/Impedance:

KD-SX9350: 4.0 V/20 kΩ load (full scale)

KD-SX990: 2.0 V/20 kΩ load (full scale)

Output Impedance: 1 kΩ

Operating Voltage:

DC 14.4 V (11 V to 16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature:

0°C to +40°C (32°F to 104°F)

Dimensions (W × H × D):

Installation Size (approx.):

182 mm × 52 mm × 150 mm

(7-3/16" × 2-1/16" × 5-15/16")

Panel Size (approx.):

Only for KD-SX9350:

Subwoofer-Out Level/Impedance:

2.0 V/20 kΩ load (full scale)

Cut off frequency: 120 Hz (fixed)

188 mm × 58 mm × 12 mm

(7-7/16" × 2-5/16" × 1/2")

Mass (approx.):

TUNER SECTION

1.4 kg (3.1 lbs) (excluding accessories)

Frequency Range:

FM: 87.5 MHz to 107.9 MHz

AM: 530 kHz to 1 710 kHz

Design and specifications are subject to change

without notice.

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)

50 dB Quieting Sensitivity: 16.3 dBf (1.8 µV/75 Ω)

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 35 dB

If a kit is necessary for your car, consult your

telephone folder for the nearest car audio

speciality shop.

Capture Ratio: 1.5 dB

[AM Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

KD-SX9350/KD-SX8350/KD-SX990

Installation/Connection Manual

Manual de instalación/conexión

Manuel d’installation/raccordement

1102KKSFLEJEIN

EN, SP, FR

GET0123-002A

[J]

ENGLISH

ESPAÑOL

FRANÇAIS

• This unit is designed to operate on 12 V DC, NEGATIVE ground • Esta unidad está diseñada para funcionar con 12 V de CC, con • Cet appareil est conçu pour fonctionner sur des sources de

electrical systems.

sistemas eléctricos de masa NEGATIVA.

courant continu de 12 V à masse NEGATIVE.

INSTALLATION (IN-DASH

MOUNTING)

INSTALACION (MONTAJE EN EL

TABLERO DE INSTRUMENTOS)

INSTALLATION (MONTAGE DANS LE

TABLEAU DE BORD)

• The following illustration shows a typical installation. However, • La siguiente ilustración muestra una instalación típica. Sin • L’illustration suivante est un exemple d’installation typique.

you should make adjustments corresponding to your specific

car. If you have any questions or require information regarding

installation kits, consult your JVC car audio dealer or a company

supplying kits.

embargo usted deberá efectuar los ajustes correspondientes

a su automóvil. Si tiene alguna pregunta o necesita información

acerca de las herramientas para instalación, consulte con su

concesionario de JVC de equipos de audio para automóviles o

a una compañía que suministra tales herramientas.

Cependant, vous devez faire les ajustements correspondant à

votre voiture particulière. Si vous avez des questions ou avez

besoin d’information sur des kits d’installation, consulter votre

revendeur d’autoradios JVC ou une compagnie

d’approvisionnement.

1 Before mounting: Press

(Control Panel Release button)

1 Antes de instalar: Pulse

(botón de liberación del panel

de control) para desenganchar el panel de control, si ya

está fijado.

1 Avant le montage: Appuyer sur

(dèblocage du

panneau de commande) pour èventeullement détacher

le panneau de commande.

to detach the control panel if already attached.

* When shipped from the factory, the control panel is packed

in the hard case.

* El panel de control se expide de fábrica dentro del

estuche duro.

* Lorsque ce panneau de commande sort d’usine, il est

rangé dans un étui de transport.

2 Remove the trim plate.

3 Remove the sleeve after disengaging the sleeve locks.

1 Stand the unit.

2 Retire la placa de guarnición.

2 Retirer la plaque d’assemblage.

3 Libérer les verrous du manchon et retirer le manchon.

1 Poser l’appareil à la verticale.

3 Retire la cubierta después de desenganchar los retenes de

la cubierta.

Note: When you stand the unit, be careful not to damage

the fuse on the rear.

1 Ponga la unidad vertical.

Remarque: Lorsque vous mettez l’appareil à la

verticale, faire attention de ne pas endommager le

fusible situé sur l’arrière.

Nota: Al poner la unidad vertical, tenga cuidado de no

dañar el fusible provisto en la parte posterior.

2 Insert the 2 handles between the unit and the sleeve, as

illustrated, to disengage the sleeve locks.

2 Inserte las dos manijas entre la unidad y la cubierta tal

como en la ilustración y desenganche los retenes de la

cubierta.

3 Remove the sleeve.

2 Insérer les 2 poignées entre l’appareil et le manchon

comme indiqué pour désengagé les verrous de

manchon.

Note: Be sure to keep the handles for future use after

installing the unit.

3 Retire la cubierta.

3 Retirer le manchon.

4 Install the sleeve into the dashboard.

Nota: Después de instalar la unidad, asegúrese de

guardar las manijas para uso futuro.

Remarque: S’assurer de garder les poignées pour une

utilisation ultérieur, après l’’installation de l’appareil.

* After the sleeve is correctly installed in the dashboard, bend

the appropriate tabs to hold the sleeve firmly in place, as

illustrated.

4 Instale la cubierta en el tablero de instrumentos.

4 Installer le manchon dans le tableau de bord.

* Después de que la cubierta esté correctamente instalada

en el tablero de instrumentos, doble las lengüetas

correspondientes para sostener la cubierta firmemente en

su lugar, tal como se muestra.

* Après installation correcte du manchon dans le tableau

de bord, plier les bonnes pattes pour maintenir

fermement le manchon en place, comme montré.

5 Fix the mounting bolt to the rear of the unit’s body and place

the rubber cushion over the end of the bolt.

6 Do the required electrical connections.

7 Slide the unit into the sleeve.

5 Monter le boulon de montage sur l’arrière du corps de

l’appareil puis passer l’amortisseur en caoutchouc sur

l’extrémité du boulon.

5 Fije el perno de montaje en la parte trasera del cuerpo de la

unidad y coloque el cojín de goma sobre el extremo del

perno.

8 Attach the trim plate.

Note: Ensure the recessed part is at the bottom.

If not, the control panel will not open completely.

6 Réalisez les connexions électriques.

6 Realice las conexiones eléctricas requeridas.

7 Faites glisser l’appareil dans le manchon jusqu’à ce qu’il

7 Deslice la unidad dentro de la cubierta hasta que quede

9 Attach the control panel.

soit verrouillé.

trabada.

8 Attachez la plaque d’ajustage.

8 Coloque la placa de guarnición.

Remarque: Assurez-vous que la partie encastrée est en

bas. Sinon, le panneau de commande ne pourra pas être

ouvert complètement.

Nota: Asegúrese de que lo parte ahuecada quede en la

parte inferior. De lo contrario, el panel de control no se podrá

abrir por completo.

9 Remonter le panneau de commande.

9 Coloque el panel de control.

Control panel

Panel de control

Panneau de commande

Trim plate

Placa de guarnición

Plaque d’assemblage

Dashboard

Tablero de instrumentos

Tableau de bord

Rubber cushion

Cojín de goma

Amortisseur en caoutchouc

Handle

Manija

Poignée

^{(7 - 1}m^/4")

₍₂3_{- 1/8")}

Lock Plate

Placa de bloqueo

Plaque de verrouillage

Sleeve

Cubierta

Manchon

Slot

Ranura

Fente

Mounting bolt

Perno de montaje

Boulon de montage

Fuse

Fusible

See “ELECTRICAL CONNECTIONS.”

Véase “CONEXIONES ELECTRICAS”.

Référez-vous “RACCORDEMENTS

ELECTRIQUES” .

Control panel

Panel de control

Panneau de commande

Trim plate

Placa de guarnición

Plaque d’assemblage

Sleeve

Cubierta

Manchon

•When installing the unit without using the sleeve

•Instalación de la unidad sin utilizar la cubierta

•When using the optional stay

•Cuando emplea un soporte opcional

•Lors de l’utilisation du hauban en option

•Lors de l’installation de l’appareil sans utiliser de manchon

In a Toyota for example, first remove the car radio and install the unit in its place.

En un Toyota por ejemplo, primero extraiga la radio del automóvil y luego instale la unidad en su lugar.

Par exemple dans une Toyota, retirer d’abord l’autoradio et installer l’appareil à la place.

Fire wall

Tabique a prueba de incendios

Cloison

Washer

Arandela

Rondelle

Stay (option)

Soporte (opción)

Hauban (en option)

* Not included with this unit.

Flat type screws (M5 x 6 mm)*

Tornillos tipo plano (M5 x 6 mm)*

Vis à tête plate (M5 x 6 mm)*

* No suministrado con esta unidad.

* Non fourni avec cet appareil.

Bracket*

Ménsula*

Support*

Lock nut

Tuerca de seguridad

Ecrou d’arrêt

Dashboard

Pocket

Tablero de instrumentos

Tableau de bord

Compartimiento

Poche

Flat type screws (M5 x 6 mm)*

Tornillos tipo plano (M5 x 6 mm)*

Vis à tête plate (M5 x 6 mm)*

Screw (option)

Tornillo (opción)

Vis (en option)

Bracket*

Ménsula*

Support*

Note: When installing the unit on the mounting bracket, make sure to use the 6 mm-long screws. If longer

screws are used, they could damage the unit.

Sleeve

Cubierta

Manchon

Nota: Cuando instala la unidad en la ménsula de montaje, asegúrese de utilizar los tornillos de

6 mm de longitud. Si se utilizan tornillos más largos, éstos pueden dañar la unidad.

Remarque: Lors de l’installation de l’appareil sur le support de montage, s’assurer d’utiliser des vis d’une

longueur de 6 mm. Si des vis plus longues sont utilisées, elles peuvent endommager l’appareil.

Mounting bolt

Perno de montaje

Boulon de montage

Removing the unit

Extracción de la unidad

Retrait de l’appareil

• Before removing the unit, release the rear section.

• Antes de extraer la unidad, libere la sección trasera.

1 Extraiga el panel de control.

• Avant de retirer l’appareil, libérer la section arrière.

1 Retirer le panneau de commande.

1 Remove the control panel.

2 Remove the trim plate.

2 Retire la placa de guarnición.

2 Retirer la plaque d’assemblage.

3 Insert the 2 handles into the slots, as shown.Then, while gently 3 Inserte las 2 manijas entre las ranuras, como se muestra.

3 Introduire les deux poignées dans les fentes, comme montré.

Puis, tout en tirant doucement les poignées écartées, faire

glisser l’appareil pour le sortir. (S’assurer de conserver les

poignées après l’installation de l’appareil.)

pulling the handles away from each other, slide out the unit.

Luego, separe shavemente las manijas y extraiga la unidad.

(Asegúrese de conservar las manijas después de

instalarlo.)

(Be sure to keep the handles after installing it.)

Control panel

Panel de control

Panneau de commande

Trim plate

Placa de guarnición

Plaque d’assemblage

Handle

Manija

Poignée

Parts list for installation and connection

The following parts are provided with this unit.

After checking them, please set them correctly.

Lista de piezas para instalación y conexión

Con esta unidad se suministran las siguientes piezas.

Después de inspeccionarlas, colóquelas correctamente.

Liste des pièces pour l’installation et

raccordement

Les pièces suivantes sont fournies avec cet appareil.

Après vérification, veuillez les placer correctement.

Hard case/Control panel

Estuche duro/Panel de control

Etui de transport/Panneau de

commande

Sleeve

Cubierta

Manchon

Trim plate

Placa de guarnición

Plaque d’assemblage

Remote controller

Control remoto

Télécommande

Battery

Pila

Pile

CR2025

Power cord

Cordón de alimentación

Cordon d’alimentation

Handles

Manijas

Poignées

Washer (ø5)

Arandela (ø5)

Rondelle (ø5)

Lock nut (M5)

Tuerca de seguridad (M5)

Ecrou d’arrêt (M5)

Mounting bolt (M5 x 20 mm)

Perno de montaje (M5 x 20 mm)

Boulon de montage (M5 x 20 mm)

Rubber cushion

Cojín de goma

Amortisseur en caoutchouc

ELECTRICAL CONNECTIONS

CONEXIONES ELECTRICAS

RACCORDEMENTS ELECTRIQUES

To prevent short circuits, we recommend that you disconnect the Para evitar cortocircuitos, recomendamos que desconecte el Pour éviter tout court-circuit, nous vous recommandons de

battery’s negative terminal and make all electrical connections terminal negativo de la batería y que efectúe todas las conexiones débrancher la borne négative de la batterie et d’effectuer tous les

before installing the unit. If you are not sure how to install this unit eléctricas antes de instalar la unidad. Si usted no está seguro de raccordements électriques avant d’installer l’appareil. Si l’on n’est

correctly, have it installed by a qualified technician.

cómo instalar correctamente la unidad, hágala instalar por un pas sûr de pouvoir installer correctement cet appareil, le faire installer

técnico cualificado.

par un technicien qualifié.

Note:

Nota:

Remarque:

This unit is designed to operate only on 12 V DC, NEGATIVE

ground electrical systems. If your vehicle does not have this

system, a voltage inverter is required, which can be purchased at

JVC car audio dealers.

Esta unidad está diseñada para funcionar con 12 V de CC, con

sistemas eléctricos de masa NEGATIVA solamente. Si su vehículo

no posee este sistema, será necesario un inversor de tensión, que

puede ser adquirido en los concesionarios de JVC de equipos de

audio para automóviles.

Cet appareil est conçu pour fonctionner sur des sources de courant

continu de 12 V à masse NEGATIVE seulement. Si votre véhicule

n’offre pas ce type d’alimentation, il vous faut un convertisseur de

tension, que vous pouvez acheter chez un revendeur d’autoradios

JVC.

• Replace the fuse with one of the specified rating. If the fuse

blows frequently, consult your JVC car audio dealer.

• If noise is a problem...

This unit incorporates a noise filter in the power circuit.However,

with some vehicles, clicking or other unwanted noise may occur.

If this happens, connect the unit’s rear ground terminal (see

connection diagram) to the car’s chassis using shorter and thicker

cords, such as copper braiding or gauge wire.If noise still persists,

consult your JVC car audio dealer.

• Maximum input of the speakers should be more than 50 W at

the rear and 50 W at the front, with an impedance of 4 Ω to 8 Ω.

• Be sure to ground this unit to the car’s chassis.

• The heat sink becomes very hot after use. Be careful not to

touch it when removing this unit.

• Reemplace el fusible por uno con la corriente especificada. Si el

fusible se quemase frecuentemente consulte con su

concesionario de JVC de equipos de audio para automóviles.

• Si el ruido fuese un problema...

Esta unidad tiene un filtro de ruido en el circuito de alimentación.

Sin embargo, en algunos vehículos, pueden producirse

chasquidos u otros ruidos indeseados. En tal caso conecte el

terminal de tierra posterior (véase diagrama de conexión) del

receptor al chasis del automóvil, utilizando cordones más gruesos

y cortos tales como alambre de cobre trenzado o de grueso

calibre. Si el ruido persiste, consulte a su concesionario de JVC

de equipos de audio para automóvil.

• La entrada máxima de los altavoces traseros debe ser mayor

de 50W y la de los delanteros de 50W, con una impedancia de

4 Ω a 8 Ω.

• Asegúrese de conectar esta unidad a tierra en el chasis del

automóvil.

• Remplacer le fusible par un de la valeur précisée.Si le fusible saute

souvent, consulter votre revendeur d’autoradios JVC.

• Si le bruit est un problème...

Cet appareil incorpore un filtre de bruit dans le circuit d’alimentation.

Cependant, avec certains véhicules, quelques claquements ou

autres bruits non désirés risquent de se produire. Si cela arrive,

raccorder la borne arrière de masse de l’appareil au châssis de

la voiture (voir le schéma de raccordement) en utilisant des cordons

les plus gros et les plus courts possibles telle qu’une barre de cuivre

ou une tresse. Si le bruit persiste, consulter votre revendeur

d’autoradios JVC.

• La puissance admissible des haut-parleurs doit être supérieure à

50W à l’arrière et à 50W l’avant, avec une impédance de 4 Ω à 8 Ω.

• S’assurer de raccorder la mise à la masse de cet appareil au

châssis de la voiture.

• Le dissipateur de chaleur devient très chaud après usage. Faire

attention de ne pas le toucher en retirant cet appareil.

Heat sink

Sumidero térmico

Dissipateur de chaleur

• El sumidero térmico estará muy caliente después del uso.

Asegúrese de no tocarlo al desmontar esta unidad.

ENGLISH

ESPAÑOL

FRANÇAIS

A Typical Connections / Conexiones típicas / Raccordements typiques

Antes de la conexión: Verifique atentamente el conexionado del Avant de commencer la connexion: vérifiez attentivement le

vehículo para no cometer errores al conectar esta unidad. Una câblage du véhicule pour ne pas connecter incorrectement cet

conexión incorrecta podría producir daños graves en la unidad. appareil. Une connexion incorrecte peut endommager

Before connecting: Check the wiring in the vehicle carefully

not to fail in connecting this unit. Incorrect connection may cause

a serious damage to this unit. The leads of the power cord

and those of the connector from the car body may be different

in color.

sérieusement l’appareil. Le fil du cordon d’alimentation et ceux

des connecteurs du châssis de la voiture peuvent être différents

en couleur.

Los cordones del cable de alimentación y los del conector

procedentes de la carrocería del automóvil podrían ser de

diferentes en color.

1 Connect the colored leads of the power cord to the car battery,

speakers and automatic antenna (if any) in the following

sequence.

1 Connectez les fils de couleur du cordon d’alimentation à la

batterie de la voiture, aux enceintes et à l’antenne automatique

(s’il y en a une) dans l’ordre suivant.

1 Conecte los conductores de color del cable de alimentación

a la batería del automóvil, altavoces y antena automática (si

la hubiere) en la secuencia siguiente.

1 Black: ground

1 Noir: a la masse

2 Jaune: a la batterie de la voiture (12 Vconstant)

3 Rouge: à la prise accessoire

4 Bleu avec bande blanche: au fil de télécommande de

l’ autre appareil ou à l’antenne automatique s’il y en a

une (200 mA max.)

5 Orange avec bande blanche: à l’interrupteur d’éclairage

de la voiture

6 Autres fils: aux enceintes

1 Negro: a tierra

2 Amarillo: a la batería del automóvil (12 V constantes)

3 Rojo: a un terminal de accesorio

4 Azul con rayas blancas: al conductor remoto de

otro equipo o de la antena automática, si hubiere

(máx. 200 mA)

5 Naranja con rayas blancas: al interruptor de control de

las luces del automóvil

6 Otros: a los altavoces

2 Yellow: to car battery (constant 12 V)

3 Red: to an accessory terminal

4 Blue with white stripe: to remote lead of other

equipment or automatic antenna if any (200 mA max.)

5 Orange with white stripe: to car light control switch

6 Others: to speakers

2 Connect the antenna cord.

2 Connectez le cordon d’antenne.

3 Finalement, connectez le faisceau de fils à l’appareil.

2 Conecte el cable de antena.

3 Por último, conecte a la unidad el cableado preformado.

3 Finally connect the wiring harness to the unit.

CAUTION/PRECAUTION/ATTENTION:

When connecting a CD changer, we recommend to use one of the CH-X series CD changers.

•

Before connecting the CD changer, make sure that the unit is turned off.

Antes de conectar el cambiador de CD, asegúrese de que la unidad está apagada.

Avant de connecter le changeur CD, assurez-vous que mettre l’appareil hors tension.

• If your CD changer is one of the KD-MK series, you need an optional cord (KS-U15K).

You can also use an external component such as a portable MD player by connecting the Line Input Adaptor KS-U57 (not

supplied). (See diagram B .)

Recomendamos conectar uno de los cambiadores de CD de la serie CH-X.

JVC CD changer or another external component

Cambiador de CD u otro componente exterior

Changeur CD JVC ou autre appareil extérieur

• Si su cambiador de CD es de la serie KD-MK, necesitará un cable opcional (KS-U15K).

Conectando el adaptador de entrada de línea KS-U57 (no suministrado), también podrá usar un componente exterior, tal

como un reproductor de MD. (Véase diagrama B .)

Lors de la connexion d’un changeur CD, nous vous recommandons d’utiliser un des changeurs CD de la série CH-X.

• Si votre changeur appartient à la série KD-MK, vous avez besoin d’un cordon optionnel (KS-U15K).

Vous pouvez aussi utiliser un appareil extérieur tel qu’un lecteur de MD en connectant l’adaptateur d’entrée de ligne KS-U57

(non fourni) (voir le diagramme B .)

Rear ground terminal

Terminal de tierra posterior

Borne arrière de masse

Subwoofer out

(Only for KD-SX9350/

KD-SX8350)

Salida de Subwoofer

(Sólo para KD-SX9350/

KD-SX8350)

Sortie de caisson de

grave(Seulement pour le

KD-SX9350/KD-SX8350)

15 A fuse

Fusible de 15 A

Fusible 15 A

Not supplied with this unit.

No suministrado con esta unidad.

Non fourni avec cet appareil.

Ignition switch

Interruptor de encendido

Interrupteur d’allumage

Antenna terminal

Terminal de la antena

Borne de l’antenne

Black

Negro

Noir

To metallic body or chassis of the car

A un cuerpo metálico o chasis del automóvil

Au corps métallique ou châssis de la voiture

LINE OUT

Yellow*¹

Amarillo*¹

Jaune*¹

(see diagram B )

Salida de linea

(véase diagrama B )

Sortie de ligne

To a live terminal in the fuse block connecting to the car battery

(bypassing the ignition switch)

A un terminal activo del bloque de fusibles conectado a la

batería del automóvil (desviando el interruptor de encendido)

Àune borne sous tension du porte-fusible connectée à la batterie

de la voiture (en dérivant l’interrupteur d’allumage)

(voir le diagramme B )

To antenna

A la antena

A l’antenne

Red

Fuse block

Bloque de fusibles

Porte-fusible

Rojo

Rouge

To an accessory terminal in the fuse block

A un terminal accesorio del bloque de fusibles

À la prise accessoire du porte-fusible

*1: Before checking the operation of this unit prior to

installation, this lead must be connected, otherwise

power cannot be turned on.

Blue with white stripe

Azul con rayas blancas

^{Bleu avec bande blanche}4

*1: Antes de comprobar el funcionamiento de esta unidad

previa a la instalación, es necesario conectar este

cable, de lo contrario no se podrá conectar la

alimentación.

To remote lead of other equipment or automatic antenna if any

Al conductor remoto de otro equipo o de la antena automática, si hubiere

Au fil de télécommande de l’autre appareil ou à l’antenne automatique s’il y en a une

*1: Pour vérifier le fonctionnement de cet appareil avant

installation, ce fil doit être raccordé, sinon l’appareil ne

peut pas être mis sous tension.

To car light control switch

Al interruptor de control

de las luces del automóvil

À l’interrupteur d’éclairage

de la voiture

(ILLUMINATION)

Orange with white stripe/ Naranja con rayas blancas/ Orange avec bande blanche

White with black stripe

Blanco con rayas negras

Blanc avec bande noire

White

Blanco

Blanc

Gray with black stripe

Gris con rayas negras

Gris avec bande noire

Gray

Gris

Green with black stripe

Verde con rayas negras

Vert avec bande noire

Green Purple with black stripe

Purple

Púrpura

Violet

Verde

Púrpura con rayas negras

Violet avec bande noire

Vert

Right speaker (front)

Altavoz derecho (frontal)

Enceinte droit (avant)

Left speaker (rear)

Altavoz izquierdo (trasero)

Enceinte gauche (arrière)

Left speaker (front)

Altavoz izquierdo (frontal)

Enceinte gauche (avant)

Right speaker (rear)

Altavoz derecho (trasero)

Enceinte droit (arrière)

PRECAUTIONS on power supply and speaker

connections:

PRECAUCIONES sobre las conexiones de la

fuente de alimentación y de los altavoces:

PRECAUTIONS sur l’alimentation et la

connexion des enceintes:

• DO NOT connect the speaker leads of the power cord to the • NO conecte los conductores de altavoz del cable de

• NE CONNECTEZ PAS les fils d’enceintes du cordon

d’alimentation à la batterie; sinon, l’appareil serait

sérieusement endommagé.

• Connectez correctement le fil noir (a la masse), le fil jaune (a la

batterie de la voiture,12 V constant) et le fil rouge (à la prise

accessoire).

• AVANT de connecter les fils d’enceintes du cordon

d’alimentation aux enceintes, vérifiez le câblage des enceintes

de votre voiture.

– Si le câblage des enceintes de votre voiture est réalisé

comme montré sur la Fig. 1 ou Fig. 2 ci-dessous, NE

CONNECTEZ PAS l’appareil en utilisant ce câblage original

d’enceintes. Si vous le faites, l’appareil sera sérieusement

endommagé.

Recommencez le câblage des enceintes de façon que vous

puissiez connecter l’appareil aux enceintes comme montré

sur la Fig. 3.

– Si le câblage des enceintes de votre voiture est comme

montré sur la Fig. 3, vous pouvez connecter l’appareil en

utilisant ce câblage original d’enceintes pour votre voiture.

– Si vous n’êtes pas sûrs du câblage d’enceintes de votre

voiture, consulter le concessionnaire de votre voiture.

car battery; otherwise, the unit will be seriously damaged.

• Connect the black lead (ground), yellow lead (to car battery,

constant 12V), and red lead (to an accessory terminal) correctly. • Conecte correctamente el conductor negro (a tierra), el

• BEFORE connecting the speaker leads of the power cord to the

speakers, check the speaker wiring in your car.

– If the speaker wiring in your car is as illustrated in Fig. 1 • ANTES de conectar a los altavoces los conductores de altavoz

and Fig. 2 below, DO NOT connect the unit using that original

speaker wiring. If you do, the unit will be seriously damaged.

Redo the speaker wiring so that you can connect the unit to

the speakers as illustrated in Fig. 3.

– If the speaker wiring in your car is as illustrated in Fig. 3, you

can connect the unit using the original speaker wiring in your car.

– If you are not sure of the speaker wiring of your car, consult

your car dealer.

alimentación a la batería de automóvil, pues podrían

producirse graves daños en la unidad.

conductor amarillo (a la batería del automóvil, 12 V constantes),

y el conductor rojo (a un terminal de accesorio).

del cable de alimentación, verifique el conexionado de altavoz

de su automóvil.

– Si el conexionado de altavoz de su automóvil es como

se indica en las Fig. 1 y Fig. 2 de abajo, NO conecte la

unidad utilizando ese conexionado de altavoz original. Si lo

hace, se producirán daños graves en la unidad.

Vuelva a efectuar el conexionado de altavoz de manera que

pueda conectar la unidad a los altavoces de la manera

indicada en la Fig.3.

– Si el conexionado de altavoz de su automóvil es como

se indica en la Fig. 3, podrá conectar la unidad utilizando

el conexionado de altavoz original de su automóvil.

– Si tiene dudas sobre el conexionado de altavoz de su

automóvil, consulte con su concesionario.

Fig. 1

Fig. 2

Fig. 3

Connecting the leads / Conexión de los conductores / Raccordement des fils

Twist the core wires when

connecting.

CAUTION / PRECAUCION / PRECAUTION:

Solder the core wires to connect them securely.

Suelde los alambres de alma para conectarlos con

firmeza.

Souder les âmes desfils pour les raccorder entre eux

de façon sûre.

Retuerza los alambres de

alma para conectarlos.

Torsader les âmes des fils en

les raccordant.

•

To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.

Para evitar cortocircuitos, cubra los cables NO UTILIZADOS con cinta aislante.

Pour éviter les court-circuits, couvrir les bornes des fils qui ne sont PAS utilisés avec de

la bande isolante.

B Connections Adding Other Equipment / Conexiones para añadir otros equipos / Raccordement pour ajouter d’autres appareils

Amplifier / Amplificador / Amplificateur

You can connect an amplifier and other equipment to upgrade your car Usted podrá conectar un amplificador y otros equipos para mejorar el Vous pouvez connecter un amplificateur ou autre appareil pour améliorer

stereo system.

sistema estéreo de su automóvil.

votre système autoradio.

• Connect the remote lead (blue with white stripe) to the remote lead of • Conecte el conductor remoto (azul con rayas blancas) al conductor • Connectez le fil de commande à distance (bleu avec bande blanche) au

the other equipment so that it can be controlled through this unit.

• Connect this unit’s line-out terminals to the amplifier’s line-in terminals. • Conecte los terminales de salida de línea de esta unidad a los

• Disconnect the speakers from this unit, connect them to the terminales de entrada de línea del amplificador.

amplifier. Leave the speaker leads of this unit unused. (Cover the • Desconecte los altavoces de esta unidad y conéctelos al

remoto del otro equipo para poderlo controlar a través de esta unidad.

fil de commande à distance de l’autre appareil de façon qu’il puisse être

commandé via cet appareil.

• Raccorder les fiches de sortie ligne de cet appareil aux fiches d’entrée

ligne de l’amplificateur.

• Déconnectez les enceintes de cet appareil et connectez-les à

l’amplificateur.Laissez les fils d’enceintes de cet appareil inutilisés.

(Cubra los terminales de estos cables sin usar con cinta aislante,

tal comose indica en la figura de arriba.)

• Seulement pour le KD-SX9350/KD-SX8350: El nivel de salida de línea

de esta unidad permanece alto para que corresponda con los sonidos

de alta fidelidad reproducidos por esta unidad.

terminals of these unused leads with insulating tape, as illustrated

above.)

• Only for KD-SX9350/KD-SX8350: The line output level of this unit is

kept high to maintain the hi-fi sounds reproduced from this unit.

When connecting an external amplifier to this unit, turn down the

gain control on the external amplifier to obtain the best performance

from this unit.

amplificador. Deje los conductores de los altavoces de esta

unidad sin usar. (Recouvrir les extrémités de ces fils inutilisés

avec de la bande isolante comme montré ci-dessus.)

• Sólo para KD-SX9350/KD-SX8350: Le niveau de sortie de ligne de

cet appareil est maintenu à un niveau élevé pour maintenir une

qualité Hi-Fi pour les sons reproduits par cet appareil.

Lors de la connexion d’un amplificateur extérieur à cet appareil,

diminuez le réglage du gain sur l’amplificateur extérieur pour obtenir

les meilleures performances de cet appareil.

Cuando conecte un amplificador externo a esta unidad, disminuya

el control de ganancia del amplificador externo para obtener un óptimo

rendimiento de esta unidad.

*2 Firmly attach the ground wire to the metallic

body or to the chassis of the car—to the

place not coated with paint (if coated with

paint, remove the paint before attaching the

wire). Failure to do so may cause damage to

Rear speakers

Altavoces traseros

Enceintes arrière

Remote lead

Cable remoto

Fil d’alimentation à distance

Y-connector (not supplied with this unit)

Conector en Y (no suministrado con esta unidad)

Connecteur Y (non fourni avec cet appareil)

this unit.

*2 Fije firmemente el cable de tierra a la

carrocería metálica o al chasis—a un lugar

no cubierto con pintura (si está cubierto

con pintura, quítela antes de fijar el cable).

De lo contrario, se podrían producir daños

en la unidad.

*2 Attachez solidement le fil de mise à la masse

au châssis métallique de la voiture—à un

endroit qui n’est pas recouvert de peinture

(s’il est recouvert de peinture, enlevez

d’abord la peinture avant d’attacher le fil).

L’appareil peut être endommagé si cela n’est

pas fait correctement.

INPUT

JVC Amplifier

Amplificador de JVC

Amplificateur JVC

To automatic antenna if any

A la antena automática,

si la hubiere

Vers l’antenne automatique,

s’il y en a une

Blue with white stripe

Azul con rayas blancas

Bleu avec bande blanche

Signal cord (not supplied with this unit)

Cable de señal (no suministrado con esta unidad)

Cordon de signal (non fourni avec cet appareil)

LINE OUT

INPUT

Front speakers

Altavoces delanteros

Enceintes avant

JVC Amplifier

Amplificador de JVC

Amplificateur JVC

REAR FRONT

KD-SX9350

KD-SX8350

KD-SX990

Front speakers

Altavoces delanteros

Enceintes avant

You can connect

another power

amplifier for front

speakers.

Podrá conectar otro

Vous pouvez connecter

un autre amplificateur de

puissance pour les

amplificador de potencia

para los altavoces

delanteros.

enceintes avant.

Subwoofer (Subwoofer out) / Subwoofer (Salida de Subwoofer ) / Caisson de grave (Sortie de caisson de grave)

Only for KD-SX9350/KD-SX8350:

You can connect a subwoofer through an amplifier to reinforce

the bass.

• For their connections, refer to the instructions supplied with

your subwoofer.

Seulement pour le KD-SX9350/KD-SX8350:

Vous pouvez connecter un caisson de grave par un amplificateur

pour renforcer les graves.

• Pour la connexion, référez-vous aux instructions fournies avec

le caisson de grave.

Sólo para KD-SX9350/KD-SX8350:

Usted podrá conectar un subwoofer a través de un

amplificador para reforzar los graves.

• Con respecto a sus conexiones, refiérase a las

instrucciones suministradas con sus subwoofer.

Subwoofer

JVC Amplifier

Amplificador de JVC

Amplificateur JVC

Subwoofer

KD-SX9350

KD-SX8350

Caisson de grave

SUBWOOFER OUT

Salida de Subwoofer

Signal cord (not supplied with this unit)

Cable de señal (no suministrado con esta unidad)

Cordon de signal (non fourni avec cet appareil)

Sortie de caisson de grave

External component / Componente exterior / Appareil extérieur

KD-SX9350

LINE OUT

KD-SX8350

KD-SX990

REAR FRONT

Signal cord (not supplied with this unit)

Cable de señal (no suministrado con esta unidad)

Cordon de signal (non fourni avec cet appareil)

Line Input Adaptor KS-U57 (not supplied with this unit)

Adaptador de entrada de línea KS-U57 (no suministrado con esta unidad)

Adaptateur d’entrée de ligne KS-U57 (non fourni avec cet appareil)

External component

Componente exterior

Appareil extérieur

TROUBLESHOOTING

LOCALIZACION DE AVERIAS

EN CAS DE DIFFICULTES

• The fuse blows.

• Le fusible saute.

• El fusible se quema.

* Are the red and black leads connected correctly?

• Power cannot be turned on.

* Is the yellow lead connected?

• No sound from the speakers.

* Is the speaker output lead short-circuited?

• Sound is distorted.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded in

common?

* Les fils rouge et noir sont-ils racordés correctement?

• L’appareil ne peut pas être mise sous tension.

* Le fil jaune est-elle raccordée?

• Pas de son des enceintes.

* Le fil de sortie de d’enceinte est-il court-circuité?

• Le son est déformé.

* Le fil de sortie de d’enceinte est-il à la masse?

* Les bornes “–” des enceintes gauche et droit sont-elles mises

ensemble à la masse?

* ¿Están los conductores rojo y negro correctamente conectados?

• No es posible conectar la alimentación.

* ¿Está el cable amarillo conectado?

• No sale sonido de los altavoces.

* ¿Está el cable de salida del altavoz cortocircuitado?

• El sonido presenta distorsión.

* ¿Está el cable de salida del altavoz conectado a masa?

* ¿Están los terminales “–” de los altavoces L y R conectados a

una masa común?

• Unit becomes hot.

• L’appareil devient chaud.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded in

common?

* Le fil de sortie de d’enceinte est-il à la masse?

* Les bornes “–” des enceintes gauche et droit sont-elles mises

ensemble à la masse?

• La unidad se calienta.

* ¿Está el cable de salida del altavoz conectado a masa?

* ¿Están los terminales “–” de los altavoces L y R conectados a

una masa común?

Mr Coffee 403 Series User Manual
Motorola BACKFLIP MB300 User Manual
Magnavox AZ 2100 User Manual
Lowrance electronic Lowrance Electronics CD Player X 3 User Manual
LG Electronics LG Lifes Good Cell Phone GU220 User Manual
Jwin JL CD815 User Manual
HTC Dash EXCA160 User Manual
Farenheit Technologies DVD 16TM User Manual
Clarion DXZ575USB User Manual
Black Box Computer Accessories USB 20 Hub 10 Port User Manual