JVC KD SH707R User Manual
CD RECEIVER  
CD-RECEIVER  
RECEPTEUR CD  
CD-RECEIVER  
KD-SH909R/KD-SH707R  
KD-SH909R  
T/P  
D
B
M
KD-SH909R  
MOSFET  
ATT  
ATT  
ANGLE  
EQ  
CD  
DAB  
DISC  
FM  
AM  
CH  
AUX  
PRESET  
PRESET  
R
D
KD-SH707R  
DISC  
SEL  
T/P  
D
B
M
VOLUME  
KD-SH707R  
MOSFET  
ATT  
RM-RK100  
For installation and connections, refer to the separate manual.  
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.  
Pour l’installation et les raccordements, se référer au manuel séparé.  
Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de desbetreffende  
handleiding.  
INSTRUCTIONS  
BEDIENUNGSANLEITUNG  
MANUEL D’INSTRUCTIONS  
GEBRUIKSAANWIJZING  
LVT0831-001A  
[E/EX]  
Thank you for purchasing a JVC product. Please read all instructions carefully before operation,  
to ensure your complete understanding and to obtain the best possible performance from the unit.  
CONTENTS  
How to reset your unit...............................  
How to use the M (mode) button ..............  
How to change the display patterns .........  
2
4
4
MP3 OPERATIONS ........................ 27  
(ONLY FOR KD-SH909R)  
Playing an MP3 disc ................................. 27  
Locating a file or particular portion  
on an MP3 disc ..................................... 29  
Selecting MP3 playback modes ............... 32  
LOCATION OF THE BUTTONS............  
Control panel ...........................................  
Remote controller ....................................  
Preparing the remote controller ................  
5
5
6
7
SOUND ADJUSTMENTS .................. 33  
Adjusting the sound ................................. 33  
Selecting preset sound modes (EQ) ........ 34  
Storing your own sound adjustments ....... 35  
BASIC OPERATIONS ......................  
Turning on the power ................................  
Setting the clock ......................................  
8
8
9
OTHER MAIN FUNCTIONS ............... 36  
Changing the general settings (PSM) ...... 36  
Assigning names to the sources .............. 41  
Changing the control panel angle............. 42  
Detaching the control panel...................... 43  
RADIO BASIC OPERATIONS ............. 10  
Listening to the radio ................................ 10  
Storing stations in memory ....................... 12  
Tuning in to a preset station ..................... 13  
RDS OPERATIONS ........................ 14  
What you can do with RDS....................... 14  
Other convenient RDS functions and  
EXTERNAL COMPONENT OPERATIONS ... 44  
Playing external components ................... 44  
adjustments ........................................... 18  
CD CHANGER OPERATIONS ............. 46  
Playing CDs ............................................. 46  
Selecting CD playback modes.................. 47  
CD OPERATIONS .......................... 21  
Playing a CD ............................................ 21  
Locating a track or particular portion  
DAB TUNER OPERATIONS ............... 49  
Tuning in to an ensemble and one of the  
on a CD ................................................. 22  
Playing a CD Text .................................... 23  
Selecting CD playback modes.................. 23  
Prohibiting disc ejection ............................ 24  
services ................................................. 49  
Storing DAB services in memory ............. 51  
Tuning in to a preset DAB service ............ 52  
What you can do more with DAB.............. 52  
MP3 INTRODUCTION ..................... 25  
(ONLY FOR KD-SH909R)  
ADDITIONAL INFORMATION............. 53  
TROUBLESHOOTING...................... 54  
What is MP3? .......................................... 25  
How are MP3 files recorded and  
played back? ......................................... 25  
MAINTENANCE ............................ 56  
Handling discs ......................................... 56  
SPECIFICATIONS .......................... 57  
3
How to use the M (mode) button:  
If you press M (mode), the unit goes into functions mode and the number,  
D (display) buttons work as different function buttons.  
4/¢  
and  
During functions mode:  
Time countdown indicator lights up  
To use these buttons for their original functions (ex. as the number buttons) again after pressing  
M (mode), wait for 5 seconds without pressing any of these buttons until the functions mode is cleared.  
• Pressing M (mode) again also clears the functions mode.  
How to change the display patterns:  
This unit is equipped with two display indication patterns – with or without the source symbol  
animation.  
To change the display patterns, press M (mode), then press D (display) within 5 seconds.  
Each time you press D (display), the display patterns change as follows:  
Ex.: While receiving an FM station...  
(Initial setting)  
Note:  
The display illustrations used in this manual are with the source symbol animations and with “CLOCK” set to  
“ON.” (See page 38.)  
CAUTION on Volume Setting  
CDs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for  
example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the  
volume before playing a disc and adjust it as required during playback.  
Note:  
For security reasons, a numbered ID card is provided with this unit, and the same ID number is imprinted on  
the unit’s chassis. Keep the card in a safe place, as it will help the authorities to identify your unit if stolen.  
4
LOCATION OF THE BUTTONS  
Control panel  
Display window  
u
i
o
a
;
f
sd  
RPT  
ST  
RND  
MO  
DIRECTORY  
FILE DISC  
TRACK  
LOCAL AF  
REG  
TP PTY  
g h  
1
j
k
l
/
7
8
p
q
2
3
4
5
6
9
T/P  
e
r
w
t
y
1 0 (eject) button  
Display window  
u MP3 indicators (only for KD-SH909R)  
DIRECTORY, FILE  
i DISC indicator  
o Main display  
2 Control dial  
3 SEL (select) button  
4 EQ (equalization) button  
5 T/P (traffic/programme type) button  
6 D (display) button  
7 B (band) button  
8 M (mode) button  
; LOCAL indicator  
a Level display indicator  
s RPT (repeat) indicator  
d ST (stereo) indicator  
f RND (random) indicator  
g CD–in indicator  
h TRACK indicator  
j Time countdown indicator  
k RDS indicators  
9
4/¢  
buttons  
•
Also function as SSM buttons when pressed  
together.  
p
ATT (angle/attenuator) button  
q Auxiliary input jack  
w Reset button  
e SOURCE  
(standby/on) button  
AF, REG, TP, PTY  
l Source/clock indicator  
/ MO (monaural) indicator  
r Number buttons  
• MO (monaural) button  
• LO (local) button  
• INT (intro scan) button  
• RPT (repeat) button  
• RND (random) button  
• DVD/Video component operation buttons  
t Remote sensor  
y
(control panel release) button  
5
5 • Searches for stations while listening to the  
radio.  
Remote controller  
• Selects ensembles while listening to the DAB  
tuner if pressed briefly.  
• Fast-forwards or reverses the track/file if  
pressed and held while listening to any disc.  
(See pages 22 and 29.)  
• Skips to the beginning of the next track/file or  
goes back to the beginning of the current  
(or previous) track/file if pressed briefly while  
listening to any disc. (See pages 22 and 29.)  
ATT  
1
3
4
ANGLE  
EQ  
CD  
5
6
DAB  
DISC  
FM  
6 • Changes the preset channel number while  
listening to the radio (or the DAB tuner).  
Each time you press the button, the preset  
channel number changes, and the selected  
station (or service) is tuned in.  
PRESET  
PRESET  
2
7
AM  
CH  
R
D
8
9
DISC  
• Only for KD-SH909R:  
AUX  
SEL  
Skips to the first file of the next directory or  
the first file of the previous directory if  
pressed and held while listening to an MP3  
disc. (See page 30.)  
VOLUME  
p
• Only for KD-SH909R:  
RM-RK100  
Skips to the first file of the next directory or  
the first file of the previous directory of the  
same hierarchy level if pressed briefly while  
listening to an MP3 disc. (See page 31.)  
1 • Turns on the unit if pressed when the unit is  
turned off.  
7 • Selects services while listening to the DAB  
tuner if pressed briefly.  
• Turns off the unit if pressed and held until“SEE  
YOU” appears on the display.  
• Drops the volume level if pressed briefly, and  
“ATT” flashes on the display.  
• Changes the disc number while listening to the  
CD changer.  
Each time you press the button, the disc  
number changes, and the selected disc  
starts playing.  
Press again to resume the volume.  
2 • CD : Selects CD player.  
• FM : • Selects FM tuner.  
• Only for KD-SH909R:  
Skips to the first file of a directory of an  
upper hierarchy level or a lower hierarchy  
level if pressed briefly while listening to an  
MP3 disc. (See page 31.)  
Each time you press the button, FM  
band (FM1, FM2 and FM3) changes.  
• Selects DAB tuner if pressed and held.*  
Each time you press and hold the  
button, DAB band (DAB 1, DAB 2 and  
DAB 3) changes.  
8 Only for KD-SH909R:  
Skips to the root directory while listening to an  
MP3 disc. (See page 31.)  
• AM : Selects AM tuner.  
• CH : Selects CD changer.*  
• AUX : Selects the external components.  
Each time you press the button, “AUX  
INPUT”** and “LINE INPUT”** are  
alternately selected.  
9*** Selects the sound adjustment items.  
Each time you press the button, the items  
change.  
p*** • Changes the volume.  
• Adjusts the sound mode (after SEL (select)  
is pressed).  
3 Changes the angle of the control panel to four  
positions.  
*
Without connecting the DAB tuner or CD  
changer, you cannot select it as the source to  
play.  
4 Selects the sound modes.  
Each time you press the button, sound modes  
change.  
** If “AUX IN” or “LINE IN” is set to “OFF,” you  
cannot select it as the source to play.  
(See page 39.)  
*** These buttons do not function in the preferred  
setting mode adjustment.  
6
2. Place the battery.  
Preparing the remote controller  
Slide the battery into the holder with the + side  
facing upwards so that the battery is fixed in  
Before using the remote controller:  
• Aim the remote controller directly at the remote  
sensor on the main unit. Make sure there is no  
obstacle in between.  
the holder.  
Lithium coin battery  
(product number:  
CR2025)  
3. Return the battery holder.  
Insert again the battery holder pushing it until  
you hear a clicking sound.  
Remote sensor  
(back side)  
• Do not expose the remote sensor to strong  
light (direct sunlight or artificial lighting).  
Installing the battery  
When the controllable range or effectiveness of the  
remote controller decreases, replace the battery.  
WARNING:  
• Store the battery in a place where children cannot  
1. Remove the battery holder.  
1) Push out the battery holder in the direction  
indicated by the arrow using a ball-point  
pen or a similar tool.  
reach.  
If a child accidentally swallows the battery,  
consult a doctor immediately.  
• Do not recharge, short, disassemble or heat the  
battery or dispose it in a fire.  
2) Remove the battery holder.  
Doing any of these things may cause the battery to  
give off heat, crack or start a fire.  
• Do not leave the battery with other metallic  
materials.  
Doing this may cause the battery to give off heat,  
crack or start a fire.  
(back side)  
1)  
2)  
• When throwing away or saving the battery, wrap it  
in tape and insulate; otherwise, the battery may  
start to give off heat, crack or start a fire.  
• Do not poke the battery with tweezers or similar  
tools.  
Doing this may cause the battery to give off heat,  
crack or start a fire.  
CAUTION:  
DO NOT leave the remote controller in a place  
(such as dashboards) exposed to direct sunlight for a  
long time. Otherwise, it may be damaged.  
7
BASIC OPERATIONS  
Note:  
When you use this unit for  
the first time, set the built-in  
clock correctly, see page 9.  
Turning on the power  
2 Adjust the volume.  
To increase the volume.  
1 Turn on the power and select the  
source.  
To decrease the volume.  
When you press the button  
for the first time, the power  
comes on. Then each time  
you press the button, the  
source changes as follows:  
Volume level appears.  
FM TUNER (FM)  
CD**  
AM TUNER (AM)  
DAB TUNER (DAB)*  
CD CHANGER (CDCH)*  
LINE INPUT (LINE)***  
AUX INPUT (AUX)***  
Volume level indicator  
Note:  
Back to the beginning  
After adjusting the volume, you can push in the  
control dial to avoid unintended operations.  
To use it again, push the control dial again to  
make it come out.  
*
Without connecting the DAB tuner or CD  
changer, you cannot select it as the source to  
play.  
** If a disc is not in the loading slot, you cannot  
select CD as the source to play.  
*** When “LINE IN” or “AUX IN” is set to  
“OFF,” you cannot select it as the source to  
play. (See page 39).  
3 Adjust the sound as you want.  
(See pages 33 – 35.)  
• You can adjust and store the input level of  
each source except for FM (see page 33).  
To drop the volume in a moment  
To operate the tuner (FM or AM—MW/LW),  
see pages 10 – 20.  
To play a CD,  
see pages 21 – 24.  
To play an MP3 disc (only for KD-SH909R),  
see pages 27 – 32.  
To operate external components – AUX INPUT  
(AUX) and LINE INPUT (LINE),  
see pages 44 and 45.  
Press and hold  
ATT while listening to any  
source. “ATT” starts flashing on the display, and  
the volume level will drop in a moment.  
To resume the previous volume level, press and  
hold the button again.  
• If you turn the control dial clockwise, you can  
also restore the sound.  
To operate the CD changer,  
see pages 46 – 48.  
To operate the DAB tuner,  
see pages 49 – 52.  
8
To turn off the power  
Press and hold SOURCE  
appears on the display.  
3 Set the hour.  
1 Select “CLOCK H (hour)” if not shown on  
the display.  
until “SEE YOU”  
• If you turn off the power while listening to a  
disc, CD play will start from where playback  
has been stopped previously, next time you turn  
on the power.  
2 Adjust the hour.  
1
2
Setting the clock  
1 Press and hold SEL (select) for more  
than 2 seconds so that one of the PSM  
items appears on the display.  
(See page 37.)  
4 Set the minute.  
1 Select “CLOCK M (minute).”  
2 Adjust the minute.  
1
2
2 Select the clock system.  
1 Select “24H/12H” if not shown on the  
display.  
5 Finish the setting.  
2 Select either “12HOUR” or “24HOUR.”  
1
2
To check the current clock time while the unit  
is turned off, press D (display).  
The power turns on, the clock time is shown for  
5 seconds, then the power turns off.  
9
RADIO BASIC OPERATIONS  
Listening to the radio  
2 Start searching a station.  
Press ¢  
to search  
stations of higher  
frequencies.  
You can use either automatic searching or manual  
searching to tune in to a particular station.  
Press  
stations of lower  
frequencies.  
4 to search  
Searching a station automatically:  
Auto search  
1 Select FM or AM (MW/LW).  
When a station is received, searching stops.  
1
Press SOURCE  
repeatedly to select  
FM or AM (MW/LW)  
as the source.  
To stop searching before a station is received,  
press the same button you have pressed for  
searching.  
2
If necessary, press B  
(band) repeatedly to  
select the FM band  
number. Each time  
you press the button,  
the FM band changes  
as follows:  
To tune in to FM stations only with strong signals  
1
Press M (mode) to enter the functions mode  
while listening to an FM broadcast.  
2
Press LO (local) while still in the functions  
mode, so that the LOCAL indicator lights up  
on the display.  
This function works only while searching FM  
stations, including SSM preset.  
Each time you press the button, the LOCAL  
indicator lights up and goes off alternately.  
F 1  
(FM 1)  
F 2  
(FM 2)  
F 3  
(FM 3)  
Selected band appears.  
Notes:  
• This receiver has three FM bands (FM1, FM2,  
FM3). You can use any one of them to listen to  
an FM broadcast.  
• While receiving an FM RDS station, PS name  
(station name) appears on the upper line of the  
main display.  
10  
• If you release your finger from the button,  
the manual mode will automatically turn off  
after 5 seconds.  
Searching a station manually:  
Manual search  
• If you hold down the button, the frequency  
keeps changing until you release the  
button.  
1 Select FM or AM (MW/LW).  
1
Press SOURCE  
repeatedly to select  
FM or AM (MW/LW)  
as the source.  
When an FM stereo broadcast is hard to  
receive:  
2
If necessary, press B  
(band) repeatedly to  
select the FM band  
number. Each time  
you press the button,  
the FM band changes  
as follows:  
1
Press M (mode) to enter the  
functions mode while listening  
to an FM stereo broadcast.  
2
Press MO (monaural) while  
still in the functions mode, so  
that the MO indicator lights up  
on the display.  
F 1  
(FM 1)  
F 2  
(FM 2)  
F 3  
(FM 3)  
• Each time you press the  
button, the MO (monaural)  
and ST (stereo) indicators  
light up alternately.  
Note:  
This receiver has three FM bands (FM1, FM2,  
FM3). You can use any one of them to listen to  
an FM broadcast.  
Lights up when receiving an FM broadcast in stereo.  
ST  
2 Press and hold ¢  
or  
4 until  
“M” (manual) starts flashing on the  
display.  
MO  
The MO indicator lights up.  
When the MO indicator is lit on the display, the  
sound you hear becomes monaural but the  
reception will be improved (the ST indicator  
goes off).  
3 Tune in to a station you want while“M”  
is flashing.  
Press ¢  
to tune  
in to stations of higher  
frequencies.  
Press  
in to stations of lower  
frequencies.  
4 to tune  
11  
Local FM stations with the strongest signals are  
searched and stored automatically in the band  
number you have selected (FM1, FM2 or FM3).  
These stations are preset in the number buttons  
— No.1 (lowest frequency) to No.6 (highest  
frequency).  
Storing stations in memory  
You can use one of the following two methods to  
store broadcasting stations in memory.  
• Automatic preset of FM stations: SSM (Strong-  
station Sequential Memory)  
• Manual preset of both FM and AM (MW/LW)  
stations  
When automatic preset is over, the station stored  
in number button 1 will be automatically tuned in.  
FM station automatic preset: SSM  
Manual preset  
You can preset 6 local FM stations in each FM  
band (FM1, FM2 and FM3).  
You can preset up to 6 stations in each band  
(FM1, FM2, FM3 and AM (MW/LW)) manually.  
Ex.: Storing an FM station of 88.3 MHz into the  
preset number 1 of the FM1 band.  
1 Select the FM band (FM1 – 3) you want  
to store FM stations into.  
1
Press SOURCE  
repeatedly to select  
FM.  
1 Select the band (FM1 – 3, AM) you  
want to store stations into (in this  
example, FM1).  
1
Press SOURCE  
repeatedly to select  
FM as the source.  
2
If necessary, press B  
(band) repeatedly to  
select the FM band.  
Each time you press  
the button, the FM  
band changes as  
follows:  
2
If necessary, press B  
(band) repeatedly to  
select FM1. Each time  
you press the button,  
the FM band changes  
as follows:  
F 1  
(FM 1)  
F 2  
(FM 2)  
F 3  
(FM 3)  
F 1  
(FM 1)  
F 2  
(FM 2)  
F 3  
(FM 3)  
2 Press and hold both buttons for more  
than 2 seconds.  
“SSM” appears, then disappears when  
automatic preset is over.  
12  
Tuning in to a preset station  
2 Tune in to a station (in this example,  
of 88.3 MHz).  
You can easily tune in to a preset station.  
Remember that you must store stations first. If  
you have not stored them yet, see “Storing  
stations in memory” on page 12.  
Press ¢  
to tune  
in to stations of higher  
frequencies.  
Press  
in to stations of lower  
frequencies.  
4 to tune  
1 Select the band (FM1 – 3, AM).  
1
Press SOURCE  
repeatedly to select  
FM or AM (MW/LW) as  
the source.  
2
If necessary, press B  
(band) repeatedly to  
select the FM band.  
Each time you press  
the button, the FM  
band changes as  
follows:  
3 Press and hold the number button (in  
this example, 1) for more than 2  
seconds.  
F 1  
(FM 1)  
F 2  
(FM 2)  
F 3  
(FM 3)  
“1” flashes for a while.  
2 Select the number (1 – 6) for the preset  
station you want.  
4 Repeat the above procedure to store  
other stations into other preset  
numbers.  
Notes:  
• A previously preset station is erased when a new station  
is stored in the same preset number.  
• Preset stations are erased when the power supply to  
the memory circuit is interrupted (for example, during  
battery replacement). If this occurs, preset the stations  
again.  
If the sound quality decreases and the  
stereo effect is lost while listening to  
an FM station...  
In some areas, adjacent stations may interfere  
with each other. If such interference occurs,  
this unit can automatically reduce the  
interference noise (the initial setting when  
shipped from the factory). However, in this  
case, the sound quality will be degraded and  
the stereo effect will also be lost.  
If you do not want to degrade the sound quality  
and to lose the stereo effect, rather than to  
eliminate the interference noise, see “To  
change the FM tuner selectivity – IF FILTER”  
on page 40.  
13  
RDS OPERATIONS  
What you can do with RDS  
To use Network-Tracking Reception  
You can select the different modes of network-  
tracking reception to continue listening to the  
same programme in its finest reception.  
RDS (Radio Data System) allows FM stations to  
send an additional signal along with their regular  
programme signals. For example, the stations  
send their station names, as well as information  
about what type of programme they broadcast,  
such as sports or music, etc.  
Another advantage of RDS function is called  
“Enhanced Other Networks.” By using the  
Enhanced Other Networks data sent from a  
station, you can tune in to a different station of a  
different network broadcasting your favourite  
programme or traffic announcement while  
listening to another programme or to another  
source such as CD.  
When shipped from the factory, “AF” is selected.  
• AF:  
Network-Tracking Reception is  
activated with Regionalization set to  
“off.”  
With this setting, the unit switches to  
another station within the same  
network when the receiving signals  
from the current station become  
weak. (In this mode, the programme  
may differ from the one currently  
received.)  
The AF indicator lights up but the  
REG indicator does not.  
By receiving the RDS data, this unit can do the  
following:  
• Tracing the same programme automatically  
(Network-Tracking Reception)  
• Standby Reception of TA (Traffic Announcement)  
or your favourite programme  
• PTY (Programme Type) search  
• Programme search  
• And some other functions  
• AF REG: Network-Tracking Reception is  
activated with Regionalization set to  
“on.”  
With this setting, the unit switches to  
another station, within the same  
network, broadcasting the same  
programme when the receiving  
signals from the current station  
become weak.  
Both the AF indicator and the REG  
indicator light up.  
Tracing the same programme  
automatically (Network-Tracking  
Reception)  
• OFF:  
Network-Tracking Reception is  
deactivated.  
When driving in an area where FM reception is  
not good, the tuner built in this unit automatically  
tunes in to another RDS station, broadcasting the  
same programme with stronger signals. So, you  
can continue to listen to the same programme in  
its finest reception, no matter where you drive.  
(See the illustration on the next page.)  
Neither the AF indicator nor the REG  
indicator lights up.  
AF indicator  
AF  
REG  
Two types of the RDS data are used to make  
Network-Tracking Reception work correctly —  
PI (Programme Identification) and AF (Alternative  
Frequency).  
Without receiving these data correctly from the  
RDS station you are listening to, Network-  
Tracking Reception will not operate.  
REG indicator  
Note:  
If a DAB tuner is connected and Alternative Reception  
(for DAB services) is activated, Network-Tracking  
Reception is also activated automatically. On the other  
hand, Networking-Tracking Reception cannot be  
deactivated without deactivating Alternative Reception.  
(See page 52.)  
14  
Using TA Standby Reception  
1 Press and hold SEL (select) for more  
than 2 seconds so that one of the  
PSM items appears on the display.  
(PSM: see page 37.)  
TA Standby Reception allows the unit to switch  
temporarily to Traffic Announcement (TA) from the  
current source (another FM station, CD or other  
connected components).  
• TA Standby Reception will not work if you are  
listening to an AM station.  
2 Select “AF-REG (alternative  
frequency/regionalization  
reception)” if not shown on the  
display.  
Press T/P to activate TA Standby Reception.  
7 When the current source is FM, the TP  
indicator either lights up or flashes.  
• If the TP indicator lights up, TA Standby  
Reception is activated.  
If a station starts broadcasting a traffic  
announcement, “TRAFFIC” appears on the  
display, and this unit automatically tunes in  
to the station. The volume changes to the  
preset TA volume level (see page 19) and  
the traffic announcement can be heard.  
• If the TP indicator flashes, TA Standby  
Reception is not yet activated since the  
station being received does not provide the  
signals used for TA Standby Reception.  
To activate TA Standby Reception, you need  
to tune in to another station providing these  
signals.  
3 Select the desired mode – “AF,”  
“AF REG” or “OFF.”  
4 Finish the setting.  
Press ¢  
a station.  
or  
4 to search for such  
When a station providing these signals is  
tuned in, the TP indicator stops flashing and  
remains lit. Now TA Standby Reception is  
activated.  
The same programme can be received on  
different frequencies.  
Programme 1  
broadcasting  
on frequency A  
7 When the current source is other than FM,  
the TP indicator lights up.  
Programme 1  
broadcasting  
If a station starts broadcasting a traffic  
announcement, “TRAFFIC” appears on the  
display, and this unit automatically changes  
the source and tunes in to the station.  
on frequency E  
To deactivate the TA Standby Reception, press  
Programme 1  
broadcasting  
T/P again.  
on frequency B  
Programme 1  
broadcasting  
on frequency C  
Programme 1  
broadcasting  
on frequency D  
15  
Using PTY Standby Reception  
4 Finish the setting.  
PTY Standby Reception allows the unit to switch  
temporarily to your favourite programme (PTY:  
ProgrammeType) from the current source (another  
FM station, CD or other connected components).  
7 When the current source is FM, the  
• PTY Standby Reception will not work if you are  
listening to an AM station.  
PTY indicator either lights up or flashes.  
•
If the PTY indicator lights up, PTY  
Standby Reception is activated.  
If a station starts broadcasting the  
selected PTY programme, this unit  
automatically tunes in to the station.  
If the PTY indicator flashes, PTY  
Standby Reception is not yet activated  
since the station being received does  
not provide the signals used for PTY  
Standby Reception.  
You can select your favourite programme type for  
PTY Standby Reception.  
When shipped from the factory, PTY Standby  
Reception is turned off. (“OFF” is selected for PTY  
Standby Reception.)  
•
1 Press and hold SEL (select) for more  
than 2 seconds so that one of the  
PSM items appears on the display.  
(PSM: see page 37.)  
To activate PTY Standby Reception,  
you need to tune in to another station  
providing these signals.  
Press ¢  
such a station.  
or  
4 to search for  
When a station providing these signals  
is tuned in, the PTY indicator stops  
flashing and remains lit. Now PTY  
Standby Reception is activated.  
2 Select “PTY STBY (standby)” if not  
shown on the display.  
7 When the current source is other than  
FM, the PTY indicator lights up.  
If a station starts broadcasting the  
selected PTY programme, this unit  
automatically changes the source and  
tunes in to the station.  
3 Select one of the twenty-nine PTY  
codes. (See page 20.)  
To deactivate the PTY Standby Reception,  
select “OFF” in step 3 on the left column. The  
PTY indicator disappears.  
Selected code name  
appears on the display  
and is stored into  
memory.  
• To cancel the PTY  
Standby Reception,  
select “OFF.”  
16  
Searching your favourite programme  
2 Select one of the twenty-nine PTY  
codes. (See page 20.)  
You can search any one of the PTY codes.  
In addition, you can store your 6 favourite  
programme types in the number buttons.  
When shipped from the factory, the following 6  
programme types have been stored in the number  
buttons (1 to 6).  
Selected code name  
appears on the display.  
To store your favourite programme types, see  
below.  
To search your favourite programme type, see  
page 18.  
3 Press and hold the number button for  
more than 2 seconds to store the PTY  
code selected into the preset number  
you want.  
1
3
2
POP M  
ROCK M  
EASY M  
6
4
5
CLASSICS  
AFFAIRS  
VARIED  
To store your favourite programme types  
1 Press and hold T/P for more than  
Preset number flashes for a while.  
2 seconds.  
4 Press and hold T/P again.  
The last selected PTY code appears.  
17  
To search your favourite programme type  
Other convenient RDS functions  
and adjustments  
1 Press and hold T/P for more than  
2 seconds while listening to an FM  
station.  
Changing the display mode while  
listening to an FM station  
You can change the indication on the display to  
station name (PS NAME), station frequency or  
programme type (PTY) while listening to an FM  
RDS station.  
Press D (display) while listening to an  
FM RDS station.  
The last selected PTY code appears.  
Each time you press the button,  
the following information appears  
on the display:  
2 Select one of the PTY codes.  
Station name (PS NAME)  
OR  
&
Frequency  
Station name (PS NAME)  
&
Programme type (PTY)  
Ex.: When “ROCK M” is selected  
3 Press ¢  
or  
4 to start PTY  
search for your favourite  
programme.  
• If there is a station broadcasting a programme  
of the same PTY code as you selected, that  
station is tuned in.  
• If there is no station broadcasting a programme  
of the same PTY code as you selected, the  
station will not change.  
Note:  
In some areas, the PTY search will not work correctly.  
18  
Automatic selection of the station  
when using the number buttons  
Usually when you press the number button, the  
preset station is tuned in.  
However, when the preset station is an RDS station,  
something different will happen. If the signals from  
that preset station are not sufficient for good  
reception, this unit, using the AF data, tunes in to  
another frequency broadcasting the same  
programme as the original preset station is  
broadcasting. (Programme search)  
Automatic clock adjustment  
When shipped from the factory, the clock built in  
this unit is set to be readjusted automatically using  
the CT (Clock Time) data in the RDS signal.  
If you do not want to use automatic clock  
adjustment, follow the procedure below.  
• See also “Changing the general settings (PSM)”  
on page 36.  
1 Press and hold SEL (select) for more than 2  
seconds so that one of the PSM items appears  
on the display.  
• The unit takes some time to tune in to another  
station using Programme search.  
2 Press ¢  
(adjustment).”  
or  
4 to select “AUTO ADJ  
3 Turn the control dial counterclockwise to select  
“OFF.”  
Now automatic clock adjustment is canceled.  
4 Press SEL (select) to finish the setting.  
To activate programme search, follow the procedure  
below.  
• See also “Changing the general settings (PSM)”  
on page 36.  
To reactivate clock adjustment, repeat the same  
procedure and select “ON” in step 3 by turning the  
control dial clockwise.  
1 Press and hold SEL (select) for more than 2  
seconds so that one of the PSM items appears  
on the display.  
2 Press ¢  
or  
4 to select  
Note:  
“P(Programme)-SEARCH.”  
You must stay tuned to the same station for more than 2  
minutes after setting “AUTO ADJ” to “ON.” Otherwise,  
the clock time will not be adjusted. (This is because the  
unit takes up to 2 minutes to capture the CT data in the  
RDS signal.)  
3 Turn the control dial clockwise to select “ON.”  
Now programme search is activated.  
4 Press SEL (select) to finish the setting.  
To cancel programme search, repeat the  
same procedure and select “OFF” in step 3 by  
turning the control dial counterclockwise.  
Setting the TA volume level  
You can preset the volume level for TA Standby  
Reception. When a traffic programme is received,  
the volume level automatically changes to the preset  
level.  
• See also “Changing the general settings (PSM)”  
on page 36.  
1 Press and hold SEL (select) for more than 2  
seconds so that one of the PSM items appears  
on the display.  
2 Press ¢  
or  
4 to select “TAVOLUME.”  
3 Turn the control dial to set to the desired volume.  
You can set it from “00” to “50.”  
4 Press SEL (select) to finish the setting.  
19  
PTY codes  
NEWS:  
News  
SOCIAL:  
Programmes on social activities  
AFFAIRS:  
Topical programmes expanding  
on current news or affairs  
Programmes which impart advice  
on a wide variety of topics  
Sport events  
RELIGION: Programmes dealing with any  
aspect of belief or faith, or the  
nature of existence or ethics  
PHONE IN: Programmes where people can  
express their views either by  
INFO:  
SPORT:  
EDUCATE: Educational programmes  
DRAMA: Radio plays  
CULTURE: Programmes on national or  
regional culture  
phone or in a public forum  
TRAVEL:  
LEISURE:  
JAZZ:  
Programmes about travel  
destinations, package tours, and  
travel ideas and opportunities  
Programmes concerned with  
recreational activities such as  
gardening, cooking, fishing, etc.  
Jazz music  
SCIENCE:  
Programmes on natural science  
and technology  
VARIED:  
Other programmes like comedies  
or ceremonies  
POP M:  
Pop music  
Rock music  
Easy-listening music  
Light music  
COUNTRY: Country music  
NATION M: Current popular music from  
another nation or region, in that  
country’s language  
ROCK M:  
EASY M:  
LIGHT M:  
CLASSICS: Classical music  
OTHER M: Other music  
WEATHER: Weather information  
FINANCE: Reports on commerce, trading,  
the Stock Market, etc.  
OLDIES:  
FOLK M:  
Classic pop music  
Folk music  
DOCUMENT: Programmes dealing with factual  
matters, presented in an  
investigative style  
CHILDREN: Entertainment programmes for  
children  
20  
CD OPERATIONS  
When playing an MP3 disc (only for KD-SH909R),  
refer also to “MP3 OPERATIONS” on pages 27  
to 32.  
The display changes to show the following:  
Playing a CD  
CD–in indicator lights up  
1 Open the control panel.  
Total track number of the inserted disc  
The control panel moves down,  
and the loading slot appears.  
Note:  
Total playing time of the inserted disc  
Current track  
When an external component is connected to the  
auxiliary input jack, be careful of handling a  
disc.  
2 Insert a disc into the loading slot.  
The unit draws the  
disc, the control  
panel goes back to  
the previous  
Elapsed playing time  
position  
(see page 42), and  
CD play starts  
automatically.  
• All the tracks on the disc will be played  
repeatedly until you stop playback—  
All Track Repeat Play.  
Note:  
Do not insert any 8 cm disc into the loading slot as it  
will get stuck inside.  
21  
Notes:  
Locating a track or particular  
portion on a CD  
• When a disc is in the loading slot, selecting “CD”  
as the source by pressing SOURCE  
CD play.  
starts  
• When a disc is inserted upside down, the disc  
automatically ejects.  
To fast-forward or reverse the track  
• If a name has been assigned to the CD (see page  
41), it will be shown on the upper line of the main  
display.  
• When you play a CD Text, the disc title/performer  
and track title will appear, followed by the elapsed  
playing time (and track No.) See also “Playing a  
CD Text” (page 23) and “To select the scroll mode  
– SCROLL” (page 39).  
Press and hold ¢  
while playing a disc, to  
fast-forward the track.  
Press and hold  
4
while playing a disc, to  
reverse the track.  
If a CD Text includes too much text information,  
some may not appear on the display.  
To go to the next or previous tracks  
• If you turn off the power or change the source, CD  
play stops (without ejecting the disc).  
Next time you turn on the power or select CD as  
the source, CD play starts from where playback  
has been stopped previously.  
Press ¢  
briefly while  
playing a disc, to go ahead  
to the beginning of the next  
track. Each time you press  
the button consecutively, the  
beginning of the next tracks  
is located and played back.  
To stop play and eject the disc  
Press  
4 briefly while  
Press 0.  
playing a disc, to go back to  
the beginning of the current  
track. Each time you press  
the button consecutively, the  
beginning of the previous  
tracks is located and played  
back.  
CD play stops, the control panel moves down, and  
the disc automatically ejects from the loading slot.  
To return the control panel to its previous  
position, press 0 again.  
• If you keep the loading slot open for one  
minute (or 30 seconds when you have ejected  
a disc with the ignition key turned to “OFF”), a  
beep sounds and the control panel returns to  
its previous position.  
Be careful not to get the disc or your finger  
caught in between the control panel and the  
unit.  
To go to a particular track directly  
Press the number button corresponding to the track  
number to start its playback.  
Note:  
If the ejected disc is not removed within 15 seconds,  
the disc is automatically inserted again into the  
loading slot to protect it from dust. (CD play will not  
start this time.)  
• To select a track number from 1 – 6:  
Press 1 (7) – 6 (12) briefly.  
• To select a track number from 7 – 12:  
Press and hold 1 (7) – 6 (12) for more than 1  
second.  
Track number  
Elapsed playing time  
22  
Selecting CD playback modes  
Playing a CD Text  
In a CD Text, some information about the disc (its  
disc title, performer and track title) is recorded.  
You can show these disc information on the  
display.  
To play back tracks at random (Random Play)  
You can play back all tracks on the disc at  
random.  
1
Press M (mode) while  
playing a disc. This unit  
enters the functions mode.  
Select text display mode while playing a  
CD Text.  
Each time you press the button,  
the display changes as follows:  
2
Press RND (random) while  
still in the functions mode, so  
that “RANDOM” flashes on  
the display.  
Then, each time you press  
RND, random play mode  
turns on and off alternately.  
• When the source symbol animation display  
is selected...  
Disc Title/Performer  
Disc Title/Performer  
&
&
Track Title  
Elapsed playing time  
RND (random) indicator  
Track No.  
&
Track Title  
&
RND  
Elapsed playing time  
Elapsed playing time  
When the random mode is turned on, the RND  
indicator lights up on the display and a track  
randomly selected starts playing.  
• When the source symbol animation display  
is not selected...  
Disc Title/Performer  
Disc Title/Performer  
&
&
Track Title  
Track No./  
Elapsed playing time  
Track Title  
&
Track No./  
Elapsed playing time  
Notes:  
• If the display cannot show the entire text all at once,  
it scrolls to show the remaining text.  
See also “To select the scroll mode – SCROLL” on  
page 39.  
• When the disc title/performer is shown, the DISC  
indicator lights up. When the track title is shown,  
the TRACK indicator lights up.  
• When you press D (display) while playing a  
conventional CD, “NO NAME” appears for the disc  
title/performer and the track title.  
23  
To play back the current track repeatedly  
(One Track Repeat Play)  
Prohibiting disc ejection  
You can play back the current track repeatedly.  
You can prohibit disc ejection and can lock a disc  
in the loading slot.  
1
Press M (mode) while  
playing a disc. The unit  
enters the functions mode.  
While pressing SEL (select),  
press and hold 0 for more than 2  
seconds.  
“NO EJECT” flashes on the  
display for about 5 seconds, and  
the disc is locked and cannot be  
ejected.  
2
Press RPT (repeat) while still  
in the functions mode, so  
that “REPEAT” flashes on  
the display.  
Then, each time you press  
RPT, One Track Repeat Play  
turns on and off alternately.  
When One Track Repeat  
Play is turned off, All Track  
Repeat Play is activated.  
Note:  
RPT (repeat) indicator  
If you press 0 while disc ejection is prohibited, the  
control panel moves down, but the disc cannot be  
ejected.  
RPT  
To return the display panel to its previous position,  
press 0.  
When the repeat mode is turned on, the RPT  
indicator lights up on the display.  
To cancel the prohibition and unlock the disc,  
press and hold 0 for more than 2 seconds again,  
while pressing SEL (select).  
To play back only intros (Intro scan)  
You can play back the first 15 seconds of each  
track sequentially.  
1
Press M (mode) while  
playing a disc. This unit  
enters the functions mode.  
“EJECT OK” flashes on the display for about 5  
seconds, and the disc is unlocked.  
2
Press INT (intro scan) while  
still in the functions mode, so  
that “INTRO” flashes on the  
display.  
4
Then, each time you press  
INT, intro scan play mode  
turns on and off alternately.  
• During intro scan play, track numbers flash.  
• When the intro scan play ends, normal  
playback resumes.  
24  
MP3 INTRODUCTION  
This chapter is only for KD-SH909R.  
Precautions when recording MP3 files  
on a CD-R or CD-RW  
What is MP3?  
This unit can only read MP3 files that are  
recorded in the format that is compliant with  
ISO 9660 Level 1, Level 2 or Joliet.  
MP3 is an abbreviation of Motion Picture Experts  
Group (or MPEG) Audio Layer 3*. MP3 is simply a  
file format with a data compression ratio of 1:10  
(128 Kbps**). That means, by using MP3 format,  
one CD-R or CD-RW can contain 10 times as  
much data volume as a regular CD can.  
How are MP3 files recorded  
and played back?  
MP3 “files (tracks)” can be recorded in  
“directories (folders)”—in PC terminology.  
During recording, the files and directories can be  
arranged in a way similar to arranging files and  
directories/folders of computer data.  
“Root” is similar to the root of a tree. Every file  
and directory can be linked to and be accessed  
from the root.  
*
This player is not compatible with the data encoded  
with Layer 1 and 2 formats.  
** Bit rate is the average number of bits that one second of  
audio data will consume. The unit used is Kbps (1000  
bits/second).To get a better audio quality, choose a higher  
bit rate. The most popular bit rate for encoding is 128  
Kbps.  
This unit is incorporated with an MP3 decoder.  
You can play back MP3 files (tracks) recorded on  
CD-Rs, CD-RWs, and CD-ROMs.  
Playback order, file search order, and directory  
search order of the MP3 files recorded on a disc  
are determined by the writing (or encoding)  
application; therefore, playback order may be  
different from the one you have intended while  
recording the directories and the files.  
Compatible with ID3v1  
Extra information data such as album title, performer  
name, song title, recording year, music genre and a  
brief comment can be stored within an MP3 file.  
The illustration on the next page shows an  
example of how MP3 files are recorded on a  
CD-R or CD-RW, how they are played back, and  
how they are searched on this unit.  
This unit can show ID3v1 tags (album name,  
performer name and song title) on the display.  
(See page 53.)  
• Some characters cannot be shown correctly.  
• This unit is not compatible with ID3v2.  
Notes:  
Other Main Features in this unit:  
• Maximum number of directories/files: 289  
(Total)  
• Available characters for directory/file names:  
A–Z, 0–9, _ (underscore)  
• Maximum number of characters for file name  
(ISO 9660 Level 1): 12 (inclusive of  
separation mark—“.” and  
• The unit can read a CD-ROM containing MP3  
files. However, if non-MP3 files are recorded  
together with MP3 files, this unit will take a longer  
time to scan the disc. It may also cause the unit to  
malfunction.  
• The unit cannot read or play an MP3 file without  
the extension code—mp3.  
extension code—“mp3”)  
• The unit is not compatible with Playlist*.  
(ISO 9660 Level 2): 31 (inclusive of  
separation mark—“.” and  
* A playlist is a simple text file, used on a PC, which enables  
users to make their own playback order without physically  
rearranging the files.  
extension code—“mp3”)  
(Joliet): 64 (inclusive of  
separation mark—“.” and  
extension code—“mp3”)  
• Maximum number of characters for directory  
name: 64  
25  
MP3 directory/file configuration  
ROOT  
01  
02  
04  
08  
1
2
3
4
03  
05  
09  
10  
11  
20  
21  
5
6
06  
07  
22  
23  
24  
12  
13  
8
7
9
14  
15  
16  
17  
18  
19  
Note:  
There is no limit on the number of the hierarchy levels (nested  
directories). However, up to 8 hierarchy levels is recommended for  
stable operations.  
ROOT  
: Root  
: Directories  
: MP3 files  
01  
MP3 playback/search order (page 29)  
• The numbers in circles below the MP3 files ( ) indicate the playback order and search order of the  
MP3 files. Normally this unit plays back MP3 files in the recorded order.  
• The numbers inside the directories indicate the playback order and search order of the directories  
on an MP3 disc. Normally this unit plays back MP3 files in the directories in the recorded order.  
Movement between the directories (pages 30 and 31)  
You can move to another directory on the same hierarchy level (only within the same parent directory)  
(e.g. from Directory 02, you can go to Directory 04 or 08) or on a different hierarchy level (e.g. from  
Directory 05, you can go to Directory 04 or 06).  
26  
MP3 OPERATIONS  
This chapter is only for KD-SH909R.  
Refer also to “CD OPERATIONS” on pages 21 to  
24.  
Playback starts automatically from the first file  
of the first directory once file check is  
completed.  
Then, the display changes to show the  
following:  
Playing an MP3 disc  
• When “TAG DISP” is set to “ON” (initial  
setting: see page 40)  
1 Open the control panel.  
The control panel moves down,  
and the loading slot appears.  
Directory name  
&
File name  
2 Insert an MP3 disc into the loading slot.  
The unit draws the  
disc, the control  
panel goes back to  
its previous position  
(see page 42) and  
playback starts  
Album name/performer*  
&
Track title*  
automatically.  
The display changes to show the following:  
CD-in indicator lights up.  
Track title (file name)  
&
Elapsed playing time (with track No.**)  
*
If an MP3 file does not have ID3 tags, album  
name/performer and track title will be  
skipped.  
** When the source symbol animation display is  
not selected.  
DIRECTORY  
FILE  
Ex.: When the disc contains 13 directories and 125  
MP3 files.  
27  
• When “TAG DISP” is set to “OFF”  
To change the display information  
While playing back an MP3 file, you  
can change the file information  
shown on the display.  
Each time you press D (display), the  
display changes to show the  
following:  
Directory name  
&
File name  
• When the source symbol animation  
display is selected...  
File name  
&
Elapsed playing time  
(with track No.*)  
Album name/  
Performer  
Album name/  
Performer  
(Directory name*)  
&
(Directory name*)  
&
Track Title  
(File name*)  
Elapsed playing time  
*
When the source symbol animation display is  
not selected.  
Track No.  
&
Elapsed playing time  
Track Title  
(File name*)  
&
Notes:  
• All the files on the disc will be played repeatedly  
until you stop playback—All File Repeat Play.  
• MP3 discs require a longer readout time**.  
(It differs due to the complexity of the directory/file  
configuration.)  
Elapsed playing time  
* When “TAG DISP” is set to “OFF,” or if an  
MP3 file does not have ID3 tags, directory  
name and file name appear.  
** Readout time is the time taken by the unit to scan or  
check the disc for files and file information.  
28  
• When the source symbol animation  
display is not selected...  
Locating a file or particular  
portion on an MP3 disc  
Album name/  
Performer  
(Directory name*)  
&
Album name/  
Performer  
(Directory name*)  
&
To fast-forward or reverse the file  
Press and hold ¢  
while playing an MP3 disc,  
to fast-forward the file.  
Track Title  
(File name*)  
Track No./  
Elapsed playing time  
Press and hold  
while playing an MP3 disc,  
to reverse the file.  
4
Track Title  
(File name*)  
&
Track No./  
Elapsed playing time  
Note:  
During this operation, you can only hear intermittent  
sounds. (The elapsed playing time also changes  
intermittently on the display.)  
* When “TAG DISP” is set to “OFF,” or if an  
MP3 file does not have ID3 tags, directory  
name and file name appear.  
To skip to the next or previous files  
Note:  
If the display cannot show the entire text all at once, it  
scrolls to show the remaining text.  
See also “To select the scroll mode – SCROLL” on  
page 39.  
Press ¢  
briefly while  
playing, to skip ahead to the  
beginning of the next file.  
Each time you press the  
button consecutively, the  
beginning of the next files is  
located and played back.  
(See “MP3 playback/search  
order” on page 26.)  
To stop play and eject the disc  
Press 0.  
Playback stops, the control panel moves down,  
and the disc automatically ejects from the loading  
slot.  
Press  
4 briefly, while  
playing, to skip back to the  
beginning of the current file.  
Each time you press the  
button consecutively, the  
beginning of the previous  
files is located and played  
back. (See “MP3 playback/  
search order” on page 26.)  
29  
To skip to the next directory—either on the  
same hierarchy level or on a different  
hierarchy level  
To go to a particular directory directly  
IMPORTANT:  
To directly select the directories using the  
number button(s), it is required that directories  
are assigned 2 digit numbers at the beginning of  
their directory names. (This can only be done  
during the recording of CD-Rs or CD-RWs.)  
Ex.: If directory name is “01 ABC”  
On the control panel:  
1 Press M (mode) while playing  
an MP3 disc. The unit enters  
the functions mode.  
2 Press ¢  
briefly while still  
in the functions mode.  
=
press 1 to go to Directory “01 ABC.”  
If directory name is “1 ABC,”  
pressing 1 does not work.  
Each time you press the button  
consecutively, the next  
directory is located (and the  
first file in the directory starts  
playing, if recorded).  
If directory name is “12 ABC”  
=
press and hold 6 (12) to go to  
Directory “12 ABC.”  
(See “Movement between the  
directories” on page 26.)  
Press the number button corresponding to the  
directory number to start playing the first file in  
the selected directory.  
On the remote controller:  
PRESET  
Each time you press and hold the  
button consecutively, the next  
directory is located (and the first file  
in the directory starts playing, if  
recorded).  
• To select a directory number from 01 – 06:  
Press 1 (7) – 6 (12) briefly.  
• To select a directory number from 07 – 12:  
Press and hold 1 (7) – 6 (12) for more than 1  
second.  
(See “Movement between the  
directories” on page 26.)  
To skip to the previous directory—either  
on the same hierarchy level or on a  
different hierarchy level  
Notes:  
• If “MP3” flashes on the display after you have  
selected a directory, it means that the directory does  
not contain any MP3 files.  
• You cannot directly select a directory with a number  
greater than 12.  
On the control panel:  
1 Press M (mode) while playing  
an MP3 disc. The unit enters  
the functions mode.  
2 Press  
in the functions mode.  
4 briefly while still  
To select a particular file in a directory, press  
Each time you press the button  
consecutively, the previous  
directory is located (and the  
first file in the directory starts  
playing, if recorded).  
¢
or  
4 after selecting the directory.  
(See “Movement between the  
directories” on page 26.)  
On the remote controller:  
PRESET  
Each time you press and hold the  
button consecutively, the previous  
directory is located (and the first  
file in the directory starts playing,  
if recorded).  
(See “Movement between the  
directories” on page 26.)  
30  
To skip to the next directory on the same To skip to the directories on the lower  
hierarchy level (only within the same parent directory) hierarchy levels  
On the remote controller:  
On the remote controller:  
PRESET  
Each time you press the button  
Each time you press the button  
consecutively, the next directory  
on the same hierarchy level is  
located (and the first file in the  
directory starts playing, if  
recorded).  
consecutively, a directory on the  
lower hierarchy level is located  
(and the first file in the directory  
starts playing, if recorded).  
DISC  
Ex.1: While playing an MP3 file in Directory 01  
(see the illustration on page 26)  
Ex.1: While playing an MP3 file in Directory 04  
(see the illustration on page 26)  
01  
02  
03  
04  
08  
02  
04  
Ex.2: While playing an MP3 file in Directory 04  
(see the illustration on page 26)  
Ex.2: While playing an MP3 file in Directory 06  
(see the illustration on page 26)  
04  
05  
06  
06  
07  
06  
To skip to the directories on the upper  
hierarchy levels  
To skip to the previous directory on the same  
hierarchy level (only within the same parent directory)  
On the remote controller:  
On the remote controller:  
DISC  
Each time you press the button  
PRESET  
Each time you press the button  
consecutively, a directory on the  
upper hierarchy level is located  
(and the first file in the directory  
starts playing, if recorded).  
consecutively, the previous  
directory on the same hierarchy  
level is located (and the first file  
in the directory starts playing, if  
recorded).  
Ex.1: While playing an MP3 file in Directory 03  
(see the illustration on page 26)  
Ex.1: While playing an MP3 file in Directory 04  
(see the illustration on page 26)  
03  
02  
01  
ROOT  
04  
02  
08  
04  
Ex.2: While playing an MP3 file in Directory 05  
(see the illustration on page 26)  
Ex.2: While playing an MP3 file in Directory 06  
(see the illustration on page 26)  
ROOT  
05  
04  
01  
06  
07  
06  
• If you reach the root, playback will not begin.  
•
To go back to the root directly, press R D on  
Note:  
the remote controller.You can go back to the root  
from any directory.  
• If files are recorded on the first hierarchy level  
without putting them into a directory, this unit  
starts playing the files.  
If there is no MP3 file in a directory that you have  
skipped to, “MP3” flashes on the display. If this  
happens, the unit pauses automatically.  
31  
RPT indicator  
Selecting MP3 playback modes  
RPT  
TRACK  
To play back files at random (Random Play)  
You can play back all files on the MP3 disc at  
random.  
Ex.: When “REPEAT 1” is selected.  
1
Press M (mode) while  
playing an MP3 disc. The  
unit enters the functions  
mode.  
Plays repeatedly  
Mode  
RPT  
Indicator  
REPEAT1 Lights  
The current file (or  
specified file).  
REPEAT2 Flashes All files of the current  
directory (or specified  
2
Press RND (random) while  
still in the functions mode,  
so that “RANDOM1” or  
“RANDOM2” flashes on the  
display.  
Then, each time you press  
RND, the random play mode  
changes as follows:  
directory).  
To play back only intros (Intro scan)  
You can play back the first 15 seconds of each file  
sequentially.  
RANDOM1  
RANDOM2  
1
Press M (mode) while  
playing an MP3 disc. The  
unit enters the functions  
mode.  
Canceled  
RND indicator  
RND  
2
Press INT (intro scan) while  
still in the functions mode, so  
that “INTRO1” or “INTRO2”  
flashes on the display.  
4
Plays at random  
Mode  
RND  
Indicator  
Then, each time you press  
INT, the intro scan play  
mode changes as follows:  
RANDOM1 Lights  
All files of the current  
directory, then the files of  
the next directory and so  
on.  
INTRO 1  
INTRO 2  
RANDOM2 Flashes All files on the disc.  
Canceled  
To play back files repeatedly (Repeat Play)  
FILE  
You can play back the current file or all the files in  
the current directory repeatedly.  
1 Press M (mode) while playing  
an MP3 disc. The unit enters  
the functions mode.  
Mode  
Plays the beginnings  
(15 seconds)  
Indicator  
The FILE  
indicator  
flashes  
INTRO1  
Of all files on the disc.  
2 Press RPT (repeat) while still  
in the functions mode, so that  
“REPEAT1” or “REPEAT2”  
flashes on the display.  
Then, each time you press  
RPT, the repeat play mode  
changes as follows:  
The  
INTRO2  
Of the first file of all  
DIRECTORY directories.  
indicator  
flashes  
REPEAT1  
REPEAT2  
Canceled  
32  
SOUND ADJUSTMENTS  
Adjusting the sound  
2 Adjust the level.  
To increase the level.  
You can adjust the sound characteristics to your  
preference.  
To decrease the level.  
1 Select the item you want to adjust.  
Each time you press the button,  
the adjustable items change as  
follows:  
Note:  
Normally, the control dial works as the volume  
control. So you do not have to select “VOLUME” to  
adjust the volume level.  
EX BASS**  
FADER*  
BAL  
(Fader)  
(Balance)  
(Extended Bass)  
WOOFER***  
VOLUME  
VOL ADJ****  
(Volume Adjustment)  
(Subwoofer)  
To adjust the input level of each source  
Indication  
To do:  
Range  
You can adjust the input level of each source  
except FM, and store it in memory.  
By adjusting the input level properly to match it  
to the FM sound level, you will not need to  
adjust the volume level each time you change  
the source.  
FADER*  
Adjust the front  
and rear speaker  
balance.  
R06 (Rear only)  
|
F06 (Front only)  
BAL  
Adjust the left  
and right speaker  
balance.  
L06 (Left only)  
|
R06 (Right only)  
EX BASS**  
Turn on or off the  
Extended Bass.  
ON  
|
OFF  
WOOFER*** Adjust the  
subwoofer output  
00 (min.)  
|
level.  
12 (max.)  
VOL ADJ**** See “To adjust  
the input level of  
–12 (min.)  
|
each source” on  
+12 (max.)  
the right column.  
VOLUME  
Adjust the volume. 00 (min.)  
|
50 (max.)  
*
If you are using a two-speaker system, set the  
fader level to “00.”  
** The richness and fullness of the bass sound is  
clearly maintained regardless of how low you set  
the volume – Extended Bass.  
*** This takes effect only when a subwoofer is  
connected.  
**** Not adjustable when the source is FM.  
“FIX” will appear.  
33  
Notes:  
Selecting preset sound modes (EQ)  
• You can adjust each sound mode to your preference,  
and store it in memory.  
If you want to adjust and store your original sound  
mode, see “Storing your own sound adjustments”  
on page 35.  
You can select a preset sound mode suitable to  
the music genre.  
• To turn on or off the extended bass, see page 33.  
1 Press EQ to activate the sound mode  
(EQ).  
Each time you press the  
button, the sound mode (EQ)  
is activated or deactivated.  
To store a sound mode separately for  
each playback source (EQ Link)  
Once you select a sound mode, it is stored in  
memory. It will be recalled every time you select  
the same source.  
A sound mode can be stored for each of the following  
sources—FM1, FM2, FM3, AM (MW/LW), CD and  
external components.  
• When the sound mode  
(EQ) is activated, the last  
selected sound mode is  
recalled and applied to the  
current source.  
• See also “Changing the general settings (PSM)”  
on page 36.  
1 Press and hold SEL (select) for more than 2  
seconds so that one of the PSM items appears  
on the display.  
Ex.: When you have selected “FLAT” previously.  
2 Press ¢  
or  
4 to select “EQ LINK”  
2 Select the sound mode you want.  
(Equalization Link).  
As you turn the control  
dial, the sound modes  
change as follows:  
3 Turn the control dial clockwise to select “ON.”  
4 Press SEL (select) to finish the setting.  
To cancel EQ Link, repeat the same procedure  
and select “OFF” by turning the control dial  
counterclockwise in step 3.  
• When “EQ LINK” is set to “ON”  
The selected sound mode can be stored in  
memory for the current source.  
Each time you change to the same source, the  
same sound mode is also recalled, and shown  
on the display.  
FLAT O Hard Rock O R & B*O POP O  
JAZZ O Dance Music O Country O Reggae O  
Classic O USER 1 O USER 2 O USER 3 O  
(back to the beginning)  
*Rhythm and Blues  
• When “EQ LINK” is set to “OFF”  
The selected sound mode effect applies to all  
the sources selected.  
EQ level changes as you select the sound mode.  
Ex.: When you select “POP”  
To cancel the sound mode, select “FLAT” in  
step 2.  
34  
Storing your own sound  
adjustments  
4 Select the frequency.  
• You can select 70 Hz,  
150 Hz, 400 Hz, 1 kHz,  
2.4 kHz, 6 kHz, and  
12.5 kHz.  
You can adjust the sound modes to your preference  
and store your own adjustments in memory  
(USER 1, USER 2 and USER 3).  
• There is a time limit in doing the following  
procedure. If the setting is canceled before you  
finish, start from step 1 again.  
5 Adjust the level of the selected  
frequency in the step above.  
• You can adjust the  
1 Press EQ to activate the sound mode  
level within the range  
of “–05” (minimum) to  
“+05” (maximum) for  
each frequency.  
(EQ).  
Each time you press the  
button, the sound mode (EQ)  
is activated or deactivated.  
• When the sound mode  
(EQ) is activated, the last  
selected sound mode is  
recalled and applied to the  
current source.  
6 Repeat steps 4 and 5 to adjust the  
other frequency levels.  
7 Select one of the user sound modes  
(USER 1, USER 2, USER 3).  
Ex.: When you have selected “POP” previously.  
2 Select the sound mode you want.  
8 Press SEL (select) to store the  
3 Press SEL (select) to enter  
adjustments.  
adjustment mode.  
The last adjusted frequency and its level appear on  
the display.  
Note:  
If you want to make temporary adjustments and not  
store in memory, skip steps 7 and 8. Your temporary  
adjustments will remain effective until you select  
another sound mode.  
35  
OTHER MAIN FUNCTIONS  
3 Adjust the PSM item selected.  
Changing the general settings  
(PSM)  
You can change the items listed on the next page  
by using the PSM (Preferred Setting Mode)  
control.  
Basic Procedure  
1 Press and hold SEL (select) for more  
than 2 seconds so that one of the PSM  
items appears on the display.  
(See page 37.)  
Ex.: When you adjust “EQ LINK” to “ON”.  
4 Repeat steps 2 and 3 to adjust the  
other PSM items if necessary.  
5 Finish the setting.  
Ex.: When you have selected “CLOCK H” previously.  
2 Select a PSM item you want to adjust.  
(See page 37.)  
Ex.: When you select “EQ LINK” .  
36  
Preferred Setting Mode (PSM) items  
2
1
3
Factory-preset See  
Set.  
settings  
page  
Counter-  
clockwise  
Clockwise  
Hold.  
Select.  
Back  
Back  
Advance  
Advance  
CLOCK H  
CLOCK M  
EQ LINK  
Hour adjustment  
0:00  
OFF  
9
Minute adjustment  
Sound control memory  
linkage  
OFF  
ON  
34  
24H/12H  
AUTO ADJ  
CLOCK  
24/12-hour time display  
Automatic clock setting  
Clock display  
12HOUR  
OFF  
24HOUR  
ON  
24HOUR  
ON  
9
19  
38  
OFF  
ON  
ON  
AF  
AF REG  
AF-REG  
Alternative frequency/  
Regionalization reception  
AF  
14  
OFF*  
PTY STBY  
PTY standby  
29 programme types  
(see page 20)  
OFF  
OFF  
16  
TA VOLUME  
Traffic announcement  
volume  
00 — 50  
20  
OFF  
ON  
19  
19  
52  
P-SEARCH  
DAB AF**  
Programme search  
OFF  
OFF  
ON  
ON  
Alternative frequency  
search  
LEVEL/EQ  
DIMMER  
Level indicator/Equalizer  
EQ  
LEVEL 1  
LEVEL 2  
OFF  
EQ  
38  
38  
LEVEL 3  
AUTO  
Dimmer mode  
AUTO  
ON  
TELEPHONE  
BEEP SW  
Telephone muting  
Key-touch tone  
MUTING OFF  
MUTING 1  
MUTING OFF  
ON  
38  
38  
MUTING 2  
OFF  
OFF  
ON  
ON  
P.AMP SW  
CONTRAST  
SCROLL  
Power amplifier switch  
Display contrast  
Scroll mode  
ON  
05  
38  
39  
01 — 10  
OFF  
ONCE  
AUTO  
ONCE  
39  
39  
MID(80Hz)  
HIGH(115Hz)  
CUT OFF F  
Subwoofer cutoff  
Frequency  
MID(80Hz)  
LOW(50Hz)  
LINE IN  
AUX IN  
Line input switch  
OFF  
OFF  
ON  
ON  
ON  
ON  
39  
39  
Auxiliary input switch  
KEY SEL  
External key-operation  
mode selection  
DVD  
VCR  
DVD  
40  
OFF  
IF FILTER  
Intermediate frequency  
filter  
WIDE  
OFF  
AUTO  
ON  
AUTO  
ON  
40  
40  
TAG DISP***  
Tag display  
•
Press SEL (select) to finish the setting.  
*
Not selectable when the DAB tuner is connected.  
** Only when the DAB tuner is connected.  
*** Only for KD-SH909R.  
37  
To select the telephone muting – TELEPHONE  
To set the clock display – CLOCK  
This mode is used when a cellular phone system  
is connected. Depending on the phone system  
used, select either “MUTING 1” or “MUTING 2,”  
whichever mutes the sounds from this unit. When  
shipped from the factory, this mode is  
deactivated.  
You can set the clock to be shown on the display  
when the unit is turned on.  
When shipped from the factory, the clock is set to  
be shown on the display.  
• ON:  
• OFF:  
Clock display is turned on.  
Clock display is turned off.  
• MUTING 1:  
• MUTING 2:  
Select this if this setting can  
mute the sounds.  
Select this if this setting can  
mute the sounds.  
To select the level meter – LEVEL/EQ  
You can select the level display according to your  
• MUTING OFF: Cancels the telephone muting.  
preference.  
When shipped from the factory, this mode is set  
to “EQ.”  
To turn the key-touch tone on or off  
– BEEP SW  
• EQ:  
Equalizer pattern is displayed.  
Audio level meter appears.  
Peak level meter appears.  
Display illumination starts.  
You can deactivate the key-touch tone if you do  
not want it to beep each time you press a button.  
When shipped from the factory, the key-touch  
tone is activated.  
• LEVEL 1:  
• LEVEL 2:  
• LEVEL 3:  
• ON:  
• OFF:  
Activates the key-touch tone.  
Deactivates the key-touch tone.  
To select the dimmer mode – DIMMER  
When you turn on the car head lights, the display  
automatically dims (Auto Dimmer).  
When shipped from the factory, Auto Dimmer  
mode is activated.  
To turn the power amplifier switch on or off  
– P.AMP SW  
• AUTO: Activates Auto Dimmer.  
• OFF: Cancels Auto Dimmer.  
You can switch off the built-in amplifier and send  
the audio signals only to the external amplifier(s)  
to get clear sounds and to prevent internal heat  
buildup inside this unit.  
• ON:  
Always dims the display.  
Note:  
When shipped from the factory, the power  
amplifier switch is turned on so that the built-in  
amplifier works.  
Auto Dimmer equipped for this unit may not work  
correctly on some vehicles, particularly on those  
having a control dial for dimming.  
In this case, set the dimmer mode to “ON” or “OFF.”  
• ON:  
Select this mode when not using  
external amplifier(s).  
• OFF:  
Select this mode when using  
external amplifier(s).  
38  
To adjust the display contrast level  
– CONTRAST  
To turn the line input switch on or off  
– LINE IN  
You can adjust the display contrast level among You can switch the line input off when no external  
01 (dark) to 10 (bright). When shipped from the component is connected to the LINE IN plugs.  
factory, the display contrast level is set at level 05. When shipped from the factory, the line input  
switch is set to “ON.”  
• ON:  
You can select “LINE INPUT (LINE)”  
as the playback source.  
You cannot select “LINE INPUT  
(LINE)” as the playback source.  
To select the scroll mode – SCROLL  
You can select the scroll mode for the disc  
information (when the entire text cannot be  
shown all at once).  
• OFF:  
When shipped from the factory, Auto Scroll mode  
is set to “ONCE.”  
To turn the auxiliary input switch on or off  
– AUX IN  
• ONCE: Scrolls only once.  
• AUTO: Repeats the scroll (5-second  
intervals in between).  
You can switch the auxiliary input off when no  
external component is connected to the auxiliary  
input jack.  
• OFF:  
Cancels Auto Scroll.  
When shipped from the factory, the auxiliary input  
switch is set to “ON.”  
Note:  
Even if the scroll mode is set to “OFF,” you can scroll  
the display by pressing D (display) for more than 1  
second.  
• ON:  
You can select “AUX INPUT (AUX)”  
as the playback source.  
• OFF:  
You cannot select “AUX INPUT(AUX)”  
as the playback source.  
To select the subwoofer cutoff frequency  
– CUT OFF F  
When a subwoofer is connected to this unit,  
select an appropriate cutoff frequency level for  
your subwoofer.  
When shipped from the factory, the subwoofer  
cutoff frequency is set to “MID(80Hz).”  
• LOW(50Hz): Frequencies higher than 50 Hz  
are cut off to the subwoofer.  
• MID(80Hz):  
Frequencies higher than 80 Hz  
are cut off to the subwoofer.  
• HIGH(115Hz): Frequencies higher than 115 Hz  
are cut off to the subwoofer.  
39  
To select the target component to operate  
through this receiver – KEY SEL  
To turn the tag display on or off – TAG DISP  
(only for KD-SH909R)  
You can operate either JVC’s DVD player or VCR  
through this receiver, by using the number  
buttons on the control panel.  
An MP3 file can contain file information called  
“ID3 Tag” where its album name, performer, track  
title, etc. are recorded.  
When shipped from the factory, these number  
buttons are set to be used for the DVD  
operations.  
There are two versions–ID3v1 (ID3 Tag version  
1) and ID3v2 (ID3 Tag version 2). This unit is  
compatible only with ID3v1.  
When shipped from the factory, “ON” is selected.  
• DVD:  
• VCR:  
• OFF:  
To operate a JVC DVD player.  
To operate a JVC VCR.  
Not to use the number buttons for  
operating other components.  
• ON: Turns on the ID3 tag display while playing  
MP3 files.  
• If an MP3 file does not have ID3 tags,  
directory name and file name appear.  
To use these number buttons on the control panel  
for DVD or VCR operations, see pages 44 and  
45.  
Note:  
If you change the setting from “OFF” to “ON”  
while playing an MP3 file, the tag display will  
be activated when the next file starts playing.  
To change the FM tuner selectivity  
– IF FILTER  
• OFF: Turns off the ID3 tag display while playing  
MP3 files. (Only the directory name and  
file name can be shown.)  
In some areas, adjacent stations may interfere  
with each other. If this interference occurs, noise  
may be heard. This unit has been preset to  
automatically reduce this interference noise  
(“AUTO”) when shipped from the factory.  
• AUTO: When this type of interference occurs,  
this unit automatically increases the  
tuner selectivity so that interference  
noise will be reduced. (But the stereo  
effect will also be lost.)  
• WIDE:  
Subject to the interference from  
adjacent stations, but sound quality  
will not be degraded and the stereo  
effect will not be lost.  
40  
Assigning names to the sources 3 Select the character set you want while  
“
” is flashing.  
You can assign names to CDs and the external  
components.  
After assigning a name, it will appear on the  
display when you select the source.  
Each time you press the button,  
the character set changes as  
follows:  
Capital letters (  
)
Small letters (  
)
Sources  
Maximum number of  
characters  
Numbers and symbols (  
)
CDs*  
up to 32 characters  
(up to 40 discs)  
4 Select a character.  
About the available  
External components up to 11 characters  
characters, see page 53.  
*You cannot assign a name to a CD Text or an MP3 disc.  
1 Select a source you want to assign a  
5 Move the cursor to the next  
name to.  
(or previous) character position.  
Each time you press the  
button, the source changes  
as described on page 8.  
6 Repeat steps 3 to 5 until you finish  
2 Press and hold SEL (select) for  
more than 2 seconds while pressing  
D (display).  
inputting the name.  
7 Finish the procedure while the last  
selected character is flashing.  
DISC  
To erase the input characters  
Insert spaces using the same procedure  
described above.  
When you select “CD” as the source  
Notes:  
• When you try to assign a name to the 41st disc,  
“NAME FULL” appears on the display. (In this  
case, delete unwanted names before assignment.)  
• When the CD changer is connected, you can assign  
names to discs in the CD changer. These names can  
also be shown on the display if you insert the discs  
in this unit.  
41  
Changing the control panel  
angle  
CAUTION:  
NEVER insert your  
finger in between the  
control panel and the  
unit, as it may get  
caught or hurt.  
You can change the angle of the control panel to  
four positions.  
Adjust the angle to the position you want.  
Each time you press the button,  
the panel angle changes as  
follows:  
B
A
C
D
When using the remote controller  
Press ANGLE ∞ repeatedly. Each time you press the button, the control panel changes its angle — Å,  
ı, Ç, then Î positions in sequence.  
To restore the control panel to its original position,  
Press ANGLE 5 repeatedly. Each time you press the button, the control panel changes its angle in  
reverse — Î, Ç, ı, then Å positions in sequence.  
42  
Attaching the control panel  
Detaching the control panel  
1 Insert the left side of the control panel  
You can detach the control panel when leaving  
the car.  
into the groove on the panel holder.  
When detaching or attaching the control panel,  
be careful not to damage the connectors on the  
back of the control panel and on the panel  
holder.  
Detaching the control panel  
Before detaching the control panel:  
• Be sure to turn off the power  
• Be sure to return the control panel to its  
original position  
2 Press the right side of the control  
panel to fix it to the panel holder.  
1 Unlock the control panel.  
The control panel  
comes out toward you.  
Note on cleaning the connectors:  
If you frequently detach the control panel, the  
connectors will deteriorate.  
2 Move the control panel to the right,  
then pull it out of the unit.  
To minimize this possibility, periodically wipe  
the connectors with a cotton swab or cloth  
moistened with alcohol, being careful not to  
damage the connectors.  
3 Put the detached control panel into the  
provided case.  
Connectors  
43  
EXTERNAL COMPONENT OPERATIONS  
MD player, etc.  
auxiliary input  
Playing external components  
1 Select the external component—LINE  
INPUT (LINE) or AUX INPUT (AUX).  
You can connect two external components to this  
unit.  
Connect one to the LINE IN plugs on the rear,  
and the other to the auxiliary input jack on the  
control panel.  
When you select a source,  
the power automatically  
comes on.  
Each time you press the  
button, the source changes  
as follows:  
• To use the external component connected to  
LINE IN plugs on the rear, set “LINE IN” to  
“ON” (see page 39).  
• To use the external component connected to  
the auxiliary input jack on the control panel, set  
“AUX IN” to “ON” (see page 39).  
FM TUNER (FM)  
CD**  
AM TUNER (AM)  
DAB TUNER (DAB)*  
CD CHANGER (CDCH)*  
LINE INPUT (LINE)***  
AUX INPUT (AUX)***  
Back to the beginning  
You can connect a JVC DVD player or VCR  
to the LINE IN plugs.  
You can operate a JVC DVD player or VCR  
through this receiver using the number  
buttons on the control panel.  
*
Without connecting the DAB tuner or CD  
changer, you cannot select it as the source to  
play.  
When you operate the VCR, you have to  
change the operation mode of the number  
buttons from the DVD operation mode to the  
VCR operation mode. (See “To select the  
target component to operate through this  
receiver – KEY SEL” on page 40.)  
** If a disc is not in the loading slot, you  
cannot select CD as the source to play.  
*** When “LINE IN” or “AUX IN” is set to  
“OFF,” you cannot select it as the source to  
play. (See page 39).  
44  
When connecting a VCR:  
:
Turns on and off the power.  
Starts playback.  
3:  
LINE INPUT (LINE): To select the component  
connected to the LINE  
¡: Fast-winds a tape when pressed.  
1: Rewinds a tape when pressed.  
7:  
IN plugs on the rear.  
Stops playback.  
Note:  
When you press the above buttons, the display shows  
“VCR” and its operation mode (such as 3, 7).  
AUX INPUT (AUX): To select the component  
connected to the  
auxiliary input jack on  
the control panel.  
3 Adjust the volume.  
To increase the level.  
2 Turn on the connected component  
and start playing the source.  
To decrease the level.  
• If connecting a JVC DVD player or VCR,  
you can perform the following operations:  
4 Adjust the sound you want.  
(See pages 33 – 35.)  
When connecting a DVD player:  
:
Turns on and off the power.  
Starts playback.  
3:  
¡: • Fast-forwards the chapter when  
pressed and held.  
• Skips to the beginning of the next  
chapters when pressed briefly.  
1: • Reverses the chapter when pressed  
and held.  
• Goes back to the beginning of the  
current chapter when pressed briefly.  
Goes back to the beginning of the  
previous chapters when pressed  
consecutively.  
7:  
Stops playback.  
Note:  
When you press the above buttons, the display shows  
“DVD” and its operation mode (such as 3, 7).  
45  
CD CHANGER OPERATIONS  
We recommend that you use one of the CH-X series  
with your unit.  
Playing CDs  
If you have another CD automatic changer,  
consult your JVC IN-CAR ENTERTAINMENT  
dealer for connections.  
Select the CD automatic changer (CD  
CHANGER).  
• For example, if your CD automatic changer is one of  
the KD-MK series, you need a cord (KS-U15K) for  
connecting it to this unit.  
When you select a source,  
the power automatically  
comes on.  
Each time you press the  
button, the source changes  
as follows:  
Before operating your CD automatic changer:  
• Refer also to the Instructions supplied with your  
CD changer.  
• If no discs are in the magazine of the CD  
changer or the discs are inserted upside down,  
“NO DISC” will appear on the display. If this  
happens, remove the magazine and set the  
discs correctly.  
• If “RESET 1” – “RESET 8” appears on the  
display, something is wrong with the  
connection between this unit and the CD  
changer.If this happens, check the connection  
and make sure the cords are connected firmly.  
Then, press the reset button of the CD  
changer.  
FM TUNER (FM)  
CD**  
AM TUNER (AM)  
DAB TUNER (DAB)*  
CD CHANGER (CDCH)*  
LINE INPUT (LINE)***  
AUX INPUT (AUX)***  
Back to the beginning  
*
Without connecting the DAB tuner or CD  
changer, you cannot select it as the source to  
play.  
** If a disc is not in the loading slot, you  
cannot select CD as the source to play.  
*** When “LINE IN” or “AUX IN” is set to  
“OFF,” you cannot select it as the source to  
play. (See page 39).  
Track number  
Elapsed  
playing time  
Disc number (then  
changes to the clock  
time when “CLOCK” is  
set to “ON”).  
46  
To fast-forward or reverse the track  
To show CD Text information  
This is possible only when connecting a JVC CD  
automatic changer equipped with CD Text reading  
capability.  
Press and hold ¢  
while playing a disc, to  
fast-forward the track.  
,
See “Playing a CD Text” on page 23.  
Press and hold  
while playing a disc, to  
reverse the track.  
4,  
Selecting CD playback modes  
To play back tracks at random (Random Play)  
You can play back all tracks of the current disc or  
of all discs in the CD changer.  
To go to the next tracks or the previous tracks  
Press ¢  
briefly, while  
playing a disc, to go ahead to  
the beginning of the next  
1
2
Press M (mode) while playing  
a disc. This unit enters the  
functions mode.  
track. Each time you press  
the button consecutively, the  
beginning of the next tracks  
is located and played back.  
Press RND (random) while  
still in the functions mode,  
so that “RANDOM1” or  
“RANDOM2” flashes on the  
display.  
Press  
4 briefly, while  
playing a disc, to go back to  
the beginning of the current  
track. Each time you press  
the button consecutively, the  
beginning of the previous  
tracks is located and played  
back.  
Then, each time you press  
RND, the random play mode  
changes as follows:  
RANDOM1  
RANDOM2  
Canceled  
To go to a particular disc directly  
RND indicator lights up.  
Press the number button corresponding to the disc  
number to start its playback (while the CD changer  
is playing).  
RND  
Ex.: When “RANDOM1” is selected.  
Mode  
RND  
Plays at random  
• To select a disc number from 1 – 6:  
Press 1 (7) – 6 (12) briefly.  
• To select a disc number from 7 – 12:  
Press and hold 1 (7) – 6 (12) for more than 1  
Indicator  
RANDOM1 Lights  
All tracks of the current  
disc, then the tracks of  
the next disc and so on.  
second.  
RANDOM2 Flashes  
All tracks of all discs  
Track number  
inserted in the magazine.  
Elapsed  
playing time  
Disc number (then  
changes to the clock  
time when “CLOCK”  
is set to “ON”).  
Ex.: When disc number 3 is selected.  
47  
To play back tracks repeatedly (Repeat Play) To play back only intros (Intro scan)  
You can play back the current track or all tracks  
on the current disc or specified disc in the CD  
changer.  
You can play back the first 15 seconds of each  
track sequentially.  
1 Press M (mode) while playing  
a disc. This unit enters the  
functions mode.  
2 Press INT (intro scan) while  
still in the functions mode, so  
that “INTRO1” or “INTRO2”  
1
2
Press M (mode) while playing  
a disc. This unit enters the  
functions mode.  
Press RPT (repeat) while still  
in the functions mode, so  
that “REPEAT1” or  
“REPEAT2” flashes on the  
display.  
Then, each time you press  
RPT, the repeat play mode  
changes as follows:  
flashes on the display.  
4
Then, each time you press  
INT, the intro scan mode  
changes as follows:  
INTRO 1  
INTRO 2  
Canceled  
REPEAT1  
REPEAT2  
Canceled  
RPT indicator lights up.  
Ex.: When “INTRO1” is selected.  
RPT  
Mode  
Indicator  
Plays the beginnings  
(15 seconds)  
INTRO1 Track number Of all tracks on all  
Ex.: When “REPEAT1” is selected.  
flashes  
inserted discs.  
Plays repeatedly  
RPT  
Indicator  
Mode  
INTRO2  
Of the first track on  
each inserted disc.  
Disc number  
flashes  
REPEAT1 Lights  
The current track (or  
specified track).  
REPEAT2 Flashes  
All tracks of the current  
disc (or specified disc).  
48  
DAB TUNER OPERATIONS  
We recommend that you use DAB (Digital Audio  
Tuning in to an ensemble and  
one of the services  
Broadcasting) tuner KT-DB1500 with your unit.  
If you have another DAB tuner, consult your JVC  
IN-CAR ENTERTAINMENT dealer.  
• Refer also to the Instructions supplied with  
your DAB tuner.  
A typical ensemble has 6 or more programmes  
(services) broadcast at the same time. After  
tuning into an ensemble, you can select a  
service you want to listen to.  
What is DAB system?  
DAB is one of the digital radio broadcasting  
systems available today. It can deliver CD  
quality sound without any annoying  
interference and signal distortion.  
Furthermore, it can carry text, pictures and  
data.  
In contrast to FM broadcast, where each  
programme is transmitted on its own  
frequency, DAB combines several  
programmes (called “services”) to form one  
“ensemble.”  
1 Select the DAB tuner.  
When you select a  
source,the power  
automatically comes on.  
Each time you press the  
button, the source  
changes as follows:  
FM TUNER (FM)  
CD**  
AM TUNER (AM)  
DAB TUNER (DAB)*  
With the DAB tuner connected with this unit,  
you can enjoy these DAB services.  
CD CHANGER (CDCH)*  
LINE INPUT (LINE)***  
AUX INPUT (AUX)***  
Back to the beginning  
*
Without connecting the DAB tuner or CD  
changer, you cannot select it as the source to  
play.  
** If a disc is not in the loading slot, you  
cannot select CD as the source to play.  
*** When “LINE IN” or “AUX IN” is set to  
“OFF,” you cannot select it as the source to  
play. (See page 39).  
CONTINUED ON THE NEXT PAGE  
49  
To change the display information while  
tuning in to an ensemble  
2 Select the DAB band (DAB1, DAB2,  
or DAB3).  
Normally service name is shown on the display.  
If you want to change the display information,  
press D (display).  
Each time you press the  
button, the DAB band  
changes as follows:  
Each time you press the button, the following  
information appears on the display for a while.  
D1  
(DAB 1)  
D3  
(DAB 3)  
D2  
(DAB 2)  
Service name  
&
Ensemble name  
Note:  
This receiver has three DAB bands (DAB 1, DAB 2,  
DAB 3). You can use any of them to tune in to an  
ensemble.  
Frequency  
&
Channel number  
3 Start searching an ensemble.  
Press ¢  
to search  
ensembles of higher  
frequencies.  
• Then, the display goes back to the original  
indication in several seconds.  
Press  
ensembles of lower  
frequencies.  
4 to search  
To tune in to a particular ensemble  
without searching  
1 Press SOURCE  
the source.  
2 Press B (band) repeatedly to select the DAB  
to select DAB tuner as  
When an ensemble is received, searching  
stops.  
band (DAB 1, DAB 2 or DAB 3).  
To stop searching before an ensemble is  
received, press the same button you have  
pressed for searching.  
3 Press and hold ¢  
or  
4 for more  
than 1 second. “MANU” or “MANUAL*” flashes  
on the display.  
4 Press ¢  
or  
4 repeatedly until the  
4 Select a service you want to listen to.  
ensemble you want is reached.  
• If you hold down the button, the ensembles  
keep changing until you release the button.  
1
Press M (mode).  
Within  
5 Seconds  
* When the source symbol animation display is not  
selected.  
2
Press ¢  
4 to select a  
service you want.  
or  
50  
4 Select a service of the ensemble  
Storing DAB services in  
memory  
you want.  
1 Press M (mode).  
You can preset up to 6 DAB services in each DAB  
band (DAB 1, DAB 2 and DAB 3) manually.  
Within  
5 Seconds  
1 Select the DAB tuner.  
When you select a source,  
the power automatically  
comes on.  
2 Press and hold  
¢
or  
4
Each time you press the  
button, the source changes  
as follows:  
to select a service  
you want.  
5 Press and hold the number button  
(in this example, 1) you want to  
store the selected service into for  
more than 2 seconds.  
FM TUNER (FM)  
CD**  
AM TUNER (AM)  
DAB TUNER (DAB)*  
CD CHANGER (CDCH)*  
LINE INPUT (LINE)***  
AUX INPUT (AUX)***  
Back to the beginning  
*
Without connecting the DAB tuner or CD  
changer, you cannot select it as the source to  
play.  
** If a disc is not in the loading slot, you cannot  
select CD as the source to play.  
*** When “LINE IN” or “AUX IN” is set to  
“OFF,” you cannot select it as the source to  
play. (See page 39).  
“1” lights up for a while.  
6 Repeat the above procedure to  
store other DAB services into other  
preset numbers.  
2 Select the DAB band (DAB 1, DAB 2  
or DAB 3) you want.  
Notes:  
Each time you press the  
button, the DAB band  
changes as follows:  
• A previously preset DAB service is erased when a  
new DAB service is stored in the same preset  
number.  
• Preset DAB services are erased when the power  
supply to the memory circuit is interrupted (for  
example, during battery replacement). If this  
occurs, preset the DAB services again.  
D1  
(DAB 1)  
D3  
(DAB 3)  
D2  
(DAB 2)  
3 Tune in to an ensemble you want.  
51  
What you can do more with DAB  
Tuning in to a preset DAB  
service  
Tracing the same program automatically  
(Alternative Reception)  
You can keep listening to the same program.  
• While receiving a DAB service:  
You can easily tune in to a preset DAB service.  
Remember that you must store services first. If  
you have not stored them yet, see page 51.  
When driving in an area where a service  
cannot be received, this unit automatically  
tunes in to another ensemble or FM RDS  
station, broadcasting the same program.  
• While receiving an FM RDS station:  
When driving in an area where a DAB service  
is broadcasting the same program as the FM  
RDS station is broadcasting, this unit  
1 Select the DAB tuner.  
When you select a source,  
the power automatically  
comes on.  
Each time you press the  
button, the source changes  
as follows:  
automatically tunes in to the DAB service.  
FM TUNER (FM)  
CD**  
AM TUNER (AM)  
Note:  
DAB TUNER (DAB)*  
When reception switches between DAB and FM, the  
listening volume level may increase or decrease  
inconveniently. This change in the volume level results  
from unequal audio injection levels at broadcaster site,  
but not from the malfunction of this unit.  
CD CHANGER (CDCH)*  
LINE INPUT (LINE)***  
AUX INPUT (AUX)***  
Back to the beginning  
To use Alternative Reception  
When shipped from the factory, Alternative  
Reception is activated.  
• See also “Changing the general settings (PSM)”  
on page 36.  
*
Without connecting the DAB tuner or CD  
changer, you cannot select it as the source to  
play.  
** If a disc is not in the loading slot, you cannot  
select CD as the source to play.  
*** When “LINE IN” or “AUX IN” is set to  
“OFF,” you cannot select it as the source to  
play. (See page 39).  
1 Press and hold SEL (select) for more than 2  
seconds so that one of the PSM items  
appears on the display.  
2 Press ¢  
or  
4 to select “DAB AF”  
2 Select the DAB band (DAB 1, DAB 2  
(alternative frequency).  
or DAB 3) you want.  
3 Turn the control dial to select the desired  
mode.  
Each time you press the  
button, the DAB band  
changes as follows:  
• ON: Traces the program among DAB  
services and FM RDS stations  
— Alternative Reception. The AF  
indicator lights up on the display  
(see page 14).  
D1  
(DAB 1)  
D3  
(DAB 3)  
D2  
(DAB 2)  
• OFF: Deactivates Alternative Reception.  
Note:  
When Alternative Reception (for DAB services) is  
activated, Network-Tracking Reception (for RDS  
stations: see page 14) is also activated  
automatically. On the other hand, Network-  
Tracking Reception cannot be deactivated without  
deactivating Alternative Reception.  
3 Select the number (1 – 6) for the  
preset DAB service you want.  
4 Press SEL (select) to finish the setting.  
52  
ADDITIONAL INFORMATION  
Sound modes (preset frequency level settings)  
The list below shows the preset frequency level settings for each sound mode.  
• You can adjust the preset sound modes (except USER 1/2/3) temporarily. However, your  
temporary adjustments will be reset when you select another sound mode.  
Sound  
Mode  
Preset equalizing values  
70 Hz  
00  
150 Hz  
00  
400 Hz  
1 kHz  
00  
2.4 kHz  
6 kHz  
00  
12.5 kHz  
00  
FLAT  
00  
+01  
+02  
00  
00  
00  
Hard Rock  
R & B  
+03  
+03  
00  
+03  
+02  
+02  
+02  
+02  
+01  
00  
00  
+02  
+01  
+01  
+03  
+01  
+01  
+02  
+02  
00  
+01  
+03  
+02  
+02  
+01  
+02  
+03  
00  
00  
+01  
+01  
+01  
–01  
00  
POP  
00  
JAZZ  
+03  
+04  
+02  
+03  
+02  
00  
+01  
00  
+01  
–02  
00  
Dance Music  
Country  
Reggae  
Classic  
USER 1  
USER 2  
USER 3  
00  
00  
+01  
00  
+02  
00  
+03  
00  
+01  
00  
00  
00  
00  
00  
00  
00  
00  
00  
00  
00  
00  
00  
00  
00  
00  
00  
00  
Available characters  
• You can use the following characters to assign names to CDs and external components.  
(See page 41.)  
• Only for KD-SH909R:  
You can display ID3v1 tags using the following letters and symbols (album title, perfomer name,  
song title, etc.) when you play back an MP3 file with this unit. (See page 25.)  
Capital letters  
Small letters  
Numbers and symbols  
A
F
K
P
U
B
G
C
H
M
R
W
D
I
E
J
0
5
!
1
6
”
2
7
#
(
3
8
$
)
4
9
a
f
b
g
c
d
i
e
j
h
m
r
L
N
S
X
O
T
Y
%
k
p
u
l
n
s
x
o
t
Q
’
q
&
+
*
/
V
,
.
v
w
y
–
<
space  
space  
:
;
=
>
Z
z
space  
?
@
_
`
53  
TROUBLESHOOTING  
What appears to be trouble is not always serious. Check the following points before calling a service  
center.  
Remedies  
Change the disc.  
Symptoms  
Causes  
• Sound is sometimes  
interrupted.  
Contents on the disc are not  
compatible with the unit.  
Stop playback while driving on  
rough roads.  
You are driving on rough  
roads.  
Change the disc.  
Disc is scratched.  
Check the cords and  
connections.  
• Sound cannot be heard  
from the speakers.  
Connections are incorrect.  
Adjust it to the optimum level.  
The volume level is set to the  
minimum level.  
Set it to “ON.”  
(See page 38.)  
The “P.AMP SW” setting is  
set to “OFF.”  
Insert a finalized CD-R/CD-RW  
or finalize the CD-R/CD-RW  
with the component used for  
recording.  
• CD-R/CD-RW cannot be  
played back.  
• Tracks on the CD-R/CD-RW  
cannot be skipped.  
CD-R/CD-RW is not finalized.  
While pressing  
, press and  
• “NO DISC” or “EJECT  
ERR” appears on the  
display and disc cannot be  
ejected.  
The unit may function  
incorrectly.  
hold 0 for more than 2 seconds.  
(Be careful not to drop the disc  
when ejecting.)  
• No message appears on  
the display but disc cannot  
be ejected.  
Press the reset button on the  
front panel. (See page 2.)  
If the reset button does not  
work, check the Installation/  
Connection Manual (separate  
volume).  
• When “ERR 00” to “ERR  
44” appears on the display. control panel movement.  
Something is blocking the  
(Ex.:You have used screws  
which are longer than  
specified.)  
Press the reset button on the  
control panel. (See page 2.)  
• This unit or CD changer  
does not work at all.  
The built-in microcomputer  
may function incorrectly due  
to noise, etc.  
Store stations manually.  
• SSM (Strong-station  
Sequential Memory)  
automatic preset does not  
work.  
Signals are too weak.  
Connect the antenna firmly.  
• Static noise while listening  
to the radio.  
The antenna is not connected  
firmly.  
54  
Symptoms  
Causes  
Remedies  
Insert a disc.  
• “NO DISC” appears on the  
display.  
No disc is in the magazine.  
• “RESET 8” appears on the  
display.  
This unit is not connected to  
a CD changer correctly.  
Connect this unit and the CD  
changer correctly and press the  
reset button of the CD changer.  
• “RESET 1” – “RESET 7”  
appears on the display.  
Press the reset button of the  
CD changer.  
• Disc cannot be played back. MP3 files do not have the  
Add the extension code—mp3  
extension code—mp3 in their to their file names.  
file names.  
MP3 files are not recorded in Change the disc.  
the format compliant with ISO (Record MP3 files using a  
9660 Level 1, 2 or Joliet.  
compliant application.)  
• Files skip, or 00’00” appears Files are encoded in Layer 1  
Insert a disc that contains files  
encoded in Layer 3 format.  
and playback stops.  
or Layer 2 format.  
• Noise is generated.  
The file played back is not an Skip to another file or change  
MP3 file (although it has the  
extension code—mp3).  
the disc.  
(Do not add the extension  
code—mp3 to non-MP3 files.)  
• A longer readout time is  
required (“FILE CHECK”  
keeps flashing on the  
display).  
Readout time varies due to  
the complexity of the  
directory/file configuration.  
Do not use too many  
hierarchies and directories.  
Also, do not record any other  
types of audio tracks together  
with MP3 files.  
• Files cannot be played back Playback order is determined  
as you have intended them  
to play.  
when the files are recorded.  
• Elapsed playing time is not  
correct.  
This sometimes occurs  
during play. This is caused by  
how the files are recorded on  
the disc.  
• “MP3” flashes on the  
display.  
There are no MP3 files in the Select another directory.  
current directory.  
• “NO FILES” appears on the There are no MP3 files in this Insert a disc that contains MP3  
display for a while, then the disc.  
disc ejects automatically.  
files.  
• Correct characters are not  
This unit can display  
displayed. (Tag Display, e.g. alphabets (capital: A–Z,  
album name)  
small: a–z), numbers and  
symbols. (See page 53.)  
55  
MAINTENANCE  
CAUTIONS:  
•
Handling discs  
Do not insert 8 cm discs (single CDs) into the  
loading slot. (Such discs cannot be ejected.)  
Do not insert any disc of unusual shape — like a  
heart or flower; otherwise, it will cause a  
malfunction.  
This unit has been designed to reproduce the  
•
discs bearing the following marks.  
COMPACT  
DIGITAL AUDIO  
•
•
Do not expose discs to direct sunlight or any heat  
source or place them in a place subject to high  
temperature and humidity. Do not leave them in a  
car.  
Do not use any solvent (for example, conventional  
record cleaner, spray, thinner, benzine, etc.) to  
clean discs.  
You can also play back your original CD-Rs  
(Recordable) and CD-RWs (Rewritable) either in  
audio CD format (or in MP3 format only for  
KD-SH909R).  
How to handle discs  
Center holder  
When removing a disc from  
its case, press down the  
center holder of the case and  
lift the disc out, holding it by  
the edges.  
• Always hold the disc by the edges. Do not  
touch its recording surface.  
When playing a CD-R or CD-RW  
You can play back your original CD-Rs or CD-RWs  
recorded in audio CD format (or in MP3 format only  
for KD-SH909R).  
(However, they may not be played back depending  
on their characteristics or recording conditions.)  
• User-edited CD-Rs (Recordable) and CD-RWs  
(Rewritable), where audio CD tracks are  
recorded, can be played back only if they are  
already “finalized.”  
• Before playing back CD-Rs or CD-RWs, read  
their instructions or cautions carefully.  
• Some CD-Rs or CD-RWs may not be played  
back on this unit because of their disc  
characteristics, damage or stain on them, or if  
the player’s lens is dirty.  
When storing a disc into its case, gently insert  
the disc around the center holder (with the  
printed surface facing up).  
• Make sure to store discs into the cases after  
use.  
To keep discs clean  
A dirty disc may not play  
correctly. If a disc does become  
dirty, wipe it with a soft cloth in  
a straight line from center to  
edge.  
• CD-Rs or CD-RWs are susceptible to high  
temperatures or high humidity; so do not leave  
them inside your car.  
• CD-RWs may require a longer readout time.  
(This is caused by the fact that the reflectance  
of CD-RWs is lower than for regular CDs.)  
To play new discs  
New discs may have some  
rough spots around the inner  
and outer edges. If such a disc  
is used, this unit may reject the  
disc.  
About mistracking:  
Mistracking may result from driving on  
extremely rough roads. This does not damage  
the unit and the disc, but will be annoying.  
We recommend that you stop disc playback  
while driving on such rough roads.  
To remove these rough spots, rub the edges with  
a pencil or ball-point pen, etc.  
Moisture condensation  
Moisture may condense on the lens inside the  
unit in the following cases:  
• After starting the heater in the car.  
• If it becomes very humid inside the car.  
Should this occur, the unit may malfunction. In  
this case, eject the disc and leave the unit  
turned on for a few hours until the moisture  
evaporates.  
56  
SPECIFICATIONS  
CD PLAYER SECTION  
AUDIO AMPLIFIER SECTION  
Maximum Power Output:  
Type: Compact disc player  
Front: 50 W per channel  
Rear: 50 W per channel  
Signal Detection System: Non-contact optical  
pickup (semiconductor laser)  
Continuous Power Output (RMS):  
Front: 19 W per channel into 4 Ω, 40 Hz to  
20 000 Hz at no more than  
Number of channels: 2 channels (stereo)  
Frequency Response: 5 Hz to 20 000 Hz  
Dynamic Range:  
98 dB  
0.8 % total harmonic distortion.  
Rear: 19 W per channel into 4 Ω, 40 Hz to  
20 000 Hz at no more than  
Signal-to-Noise Ratio: 102 dB  
Wow and Flutter: Less than measurable limit  
0.8 % total harmonic distortion.  
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)  
Equalizer Control Range:  
[For KD-SH909R]  
MP3 decoding format: MPEG1/2 Audio Layer 3  
Max. Bit Rate: 320 Kbps  
Frequencies: 70 Hz, 150 Hz, 400 Hz, 1 kHz,  
2.4 kHz, 6 kHz, 12.5 kHz.  
GENERAL  
Power Requirement:  
Level:  
±10 dB  
Operating Voltage: DC 14.4 V  
Frequency Response: 40 Hz to 20 000 Hz  
Signal-to-Noise Ratio: 70 dB  
Line-In Level/Impedance: 1.5 V/20 kΩ load  
Auxiliary Input jack: 3.5 mm dia. stereo mini jack  
(analog)  
Line-Out Level/Impedance:  
4.0 V/20 kΩ load (full scale)  
Output Impedance: 1 kΩ  
(11 V to 16 V allowance)  
Grounding System: Negative ground  
Allowable Operating Temperature: 0°C to +40°C  
Dimensions (W x H x D):  
Installation Size: 182 mm x 52 mm x 161 mm  
Panel Size: 188 mm x 58 mm x 17 mm  
Mass: 1.8 kg (excluding accessories)  
Design and specifications subject to change without  
notice.  
TUNER SECTION  
Frequency Range:  
FM: 87.5 MHz to 108.0 MHz  
AM: (MW)  
(LW)  
522 kHz to 1 620 kHz  
144 kHz to 279 kHz  
[FM Tuner]  
Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)  
50 dB Quieting Sensitivity:  
16.3 dBf (1.8 µV/75 Ω)  
Alternate Channel Selectivity (400 kHz):  
65 dB  
Frequency Response: 40 Hz to 15 000 Hz  
Stereo Separation: 30 dB  
Capture Ratio: 1.5 dB  
[MW Tuner]  
Sensitivity: 20 µV  
Selectivity: 35 dB  
[LW Tuner]  
Sensitivity: 50 µV  
57  
Having TROUBLE with operation?  
Please reset your unit  
Refer to page of How to reset your unit  
Haben Sie PROBLEME mit dem Betrieb?  
Bitte setzen Sie Ihr Gerät zurück  
Siehe Seite Zurücksetzen des Geräts  
Vous avez des PROBLÈMES de fonctionnement?  
Réinitialisez votre appareil  
Référez-vous à la page intitulée Comment réinitialiser votre appareil  
Hebt u PROBLEMEN met de bediening?  
Stel het apparaat terug  
Zie de pagina met de paragraaf Het apparaat terugstellen  
VICTOR COMPANY OF JAPAN, LIMITED  
EN, GE, FR, NL  
0102MNMMDTJEIN  
J
C
V

Nokia 1661 User Manual
Motorola Renegade V950 User Manual
LG Electronics Optimus S User Manual
Kenwood KDG119S User Manual
Kenwood ALL MODE MULTIBANDER TS B2000 User Manual
JVC CH X500 User Manual
Fujitsu Computer Drive MAP3735NP User Manual
Emerson CKD3810 User Manual
Bolens 452 Thru 465 User Manual
Black &amp; Decker CM1010B User Manual