JVC KD S723R User Manual

CD RECEIVER  
CD-RECEIVER  
RECEPTEUR CD  
CD-RECEIVER  
KD-S871R/KD-S723R/KD-S721R  
KD-S871R  
FM  
TP/PTY  
¢
SEL  
CD  
4
DISP  
AM  
7
8
MO  
9
10  
11 RPT  
12 RND  
MODE  
SCM  
KD-S723R  
FM  
TP/PTY  
¢
4
SEL  
CD  
DISP  
AM  
7
8
MO  
9
10  
11 RPT  
12 RND  
MODE  
SCM  
KD-S721R  
COMPACT  
FM  
TP/PTY  
¢
4
SEL  
CD  
DISP  
AM  
7
8
MO  
9
10  
11 RPT  
12 RND  
MODE  
SCM  
DIGITAL AUDIO  
For installation and connections, refer to the separate manual.  
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.  
Pour l’installation et les raccordements, se référer au manuel séparé.  
Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de desbetreffende  
handleiding.  
INSTRUCTIONS  
BEDIENUNGSANLEITUNG  
MANUEL D’INSTRUCTIONS  
GEBRUIKSAANWIJZING  
GET0065-001A  
[E/EX]  
Position And Reproduction Of Labels  
Bottom panel of the main unit  
CAUTION: Invisible laser ADVARSEL:Usynliglaser-  
VARNING:Osynliglaser- VARO: Avattaessa jasuo-  
radiationwhenopen and  
stråling ved åbning, når strålning när dennadel jalukitus ohitettaessa olet  
interlock failedordefeated. sikkerhedsafbrydereerude är öppnadochspärren är alttiina näkymättömälle  
AVOID DIRECTEXPOSURE af funktion.Undgåudsæt- urkopplad. Betrakta ej lasersäteilylle. Älä katso  
strålen.  
(s)  
TO BEAM.  
(e)  
telse for stråling.  
(d)  
säteeseen.  
(f)  
IMPORTANT FOR LASER PRODUCTS  
Precautions:  
Name/Rating plate  
1.CLASS 1 LASER PRODUCT  
2.CAUTION: Invisible laser radiation when open and  
interlock failed or defeated. Avoid direct exposure to  
beam.  
3.CAUTION: Do not open the top cover. There are no  
user-serviceable parts inside. Leave all servicing to  
qualified service personnel.  
4.CAUTION: This CD player uses invisible laser  
radiation and is equipped with safety switches to  
prevent radiation emission when unloading CDs. It is  
dangerous to defeat the safety switches.  
Caution:  
This product contains a laser component  
of higher laser class than Class 1.  
5.CAUTION: Use of controls, adjustments or  
performance of procedures other than those specified  
herein may result in hazardous radiation exposure.  
How to reset your unit  
Press and hold both the SEL (select) and  
time for several seconds.  
(standby/on/attenuator) buttons at the same  
This will reset the built-in microcomputer.  
(standby/on/attenuator)  
SEL (select)  
Notes:  
Your preset adjustments – such as preset channels or sound adjustments – will also be erased.  
• If a CD is in the unit, it will eject when you reset the unit. Be careful not to drop the CD.  
2
Thank you for purchasing a JVC product. Please read all instructions carefully before operation,  
to ensure your complete understanding and to obtain the best possible performance from the unit.  
CONTENTS  
How to reset your unit ...............................  
How to use the number buttons................  
2
3
SOUND ADJUSTMENTS .................. 20  
Adjusting the sound ................................. 20  
Using the sound control memory (SCM) .. 21  
Storing your own sound adjustments ....... 22  
LOCATION OF THE BUTTONS............  
4
4
Control panel ...........................................  
OTHER MAIN FUNCTIONS ............... 23  
Setting the clock ...................................... 23  
Changing the general settings (PSM) ...... 23  
Selecting the color of the display window  
BASIC OPERATIONS ......................  
5
Turning on the power ................................  
5
RADIO BASIC OPERATIONS .............  
Listening to the radio ................................  
Storing stations in memory .......................  
Tuning in to a preset station .....................  
6
6
8
9
(ONLY FOR KD-S871R) ........................ 25  
Detaching the control panel...................... 26  
USING THE REMOTE CONTROLLER  
(ONLY FOR KD-S871R) ........................ 27  
RDS OPERATIONS ........................ 10  
What you can do with RDS....................... 10  
Other convenient RDS functions and  
Location of the buttons ............................. 28  
MAINTENANCE ............................ 29  
adjustments ........................................... 14  
Handling CDs .......................................... 29  
CD OPERATIONS .......................... 17  
Playing a CD ............................................ 17  
Locating a track or a particular portion  
TROUBLESHOOTING...................... 30  
SPECIFICATIONS .......................... 31  
on a CD ................................................. 18  
Selecting CD playback modes.................. 18  
Prohibiting CD ejection ............................. 19  
How to use the number buttons:  
If you press MODE, the unit goes into functions mode and the number buttons work as different  
function buttons.  
MODE  
«
7
8
9
10  
11  
12  
RND  
MO  
RPT  
Time countdown indicator  
To use these buttons as number buttons again after pressing MODE, wait for 5 seconds without  
pressing any number button until the functions mode is cleared.  
• Pressing MODE again also clears the functions mode.  
Note:  
For security reasons, a numbered ID card is provided with this unit, and the same ID number is imprinted on  
the unit’s chassis. Keep the card in a safe place, as it will help the authorities to identify your unit if stolen.  
BEFORE USE  
*For safety....  
*Temperature inside the car....  
If you have parked the car for a long time in hot or  
cold weather, wait until the temperature in the car  
becomes normal before operating the unit.  
• Do not raise the volume level too much, as this will  
block outside sounds, making driving dangerous.  
• Stop the car before performing any complicated  
operations.  
3
LOCATION OF THE BUTTONS  
Control panel  
Display window  
a
s
d
f
g
h j  
k
l
/
z
x
2
3
5
6
7 8 9  
p
1
4
FM  
TP/PTY  
CD  
¢
SEL  
SSM  
4
AM  
DISP  
7
MO  
9
10  
11  
12 RND  
8
RPT  
MODE  
SCM  
q
w e  
r
t
y
u
i
o
;
1
(standby/on/attenuator) button  
Display window  
2 TP (traffic programme)/  
PTY (programme type) button  
3 SEL (select) button  
4 Display window  
5 Loading slot  
6 AM button  
7 CD button  
8 0 (eject) button  
9 FM button  
p
a SCM (sound control memory) indicator  
s CD source indicator  
d FM band indicator (FM1, FM2, FM3)  
f AM band indicator  
g Tuner reception indicators  
MO (monaural), ST (stereo)  
h RND (random) indicator  
j RPT (repeat) indicator  
k RDS indicators  
AF, REG, TP, PTY  
l LOUD (loudness) indicator  
/ CD–in indicator  
z Main display  
x Volume (or audio) level indicator  
(for KD-S871R)  
¢/4  
buttons  
Also functions as SSM buttons when pressed  
together.  
q +/– buttons  
w DISP (display) button  
e Remote sensor (only for KD-S871R)  
r MO (monaural) button  
t RPT (repeat) button  
y RND (random) button  
u Number buttons  
Volume level indicator  
(for KD-S723R and KD-S721R)  
i MODE button  
o SCM (sound control memory) button  
;
(control panel release) button  
4
BASIC OPERATIONS  
FM  
TP/PTY  
CD  
¢
SEL  
SSM  
4
AM  
DISP  
7
8
MO  
9
10  
11 RPT  
12 RND  
MODE  
SCM  
1
3
2
Turning on the power  
Volume level appears.  
1 Turn on the power.  
Volume level indicator  
(see page 25)  
Note on One-Touch Operation:  
When you select a source in step 2 below, the  
power automatically comes on. You do not have  
to press this button to turn on the power.  
4 Adjust the sound as you want.  
(See pages 20 – 22.)  
2 Select the source.  
To drop the volume in a moment  
FM  
Press  
briefly while listening to any  
source. “ATT” starts flashing on the display, and  
the volume level will drop in a moment.  
To resume the previous volume level, press the  
button briefly again.  
CD  
AM  
To turn off the power  
Press and hold  
To operate the tuner (FM or AM),  
see pages 6 – 16.  
for more than one second.  
To operate the CD,  
Note:  
see pages 17 – 19.  
When you use this unit for the first time, set the built-in  
clock correctly, see page 23.  
3 Adjust the volume.  
To increase the volume.  
CAUTION on Volume Setting:  
CDs produce very little noise compared with other  
sources. If the volume level is adjusted for the  
tuner, for example, the speakers may be damaged  
by the sudden increase in the output level.  
Therefore, lower the volume before playing a disc  
and adjust it as required during playback.  
To decrease the volume.  
5
RADIO BASIC OPERATIONS  
FM  
TP/PTY  
SEL  
CD  
¢
SSM  
4
AM  
DISP  
7
MO  
9
10  
11 RPT  
12 RND  
8
MODE  
SCM  
Listening to the radio  
2 Start searching a station.  
You can use either automatic searching or manual  
searching to tune in to a particular station.  
To search stations of higher  
frequencies.  
¢
4
Searching a station automatically:  
Auto search  
To search stations of lower  
frequencies.  
1 Select the band (FM1 – 3, AM).  
FM  
When a station is received, searching  
stops.  
CD  
FM1  
FM2  
FM3  
AM  
To stop searching before a station is received,  
press the same button you have pressed for  
searching.  
AM  
Selected band appears.  
Note:  
This receiver has three FM bands (FM1, FM2,  
FM3). You can use any one of them to listen to an  
FM broadcast.  
6
• If you release your finger from the button,  
the manual mode will automatically turn off  
after 5 seconds.  
Searching a station manually:  
Manual search  
• If you hold down the button, the frequency  
keeps changing (in 50 kHz intervals for FM  
and 9 kHz intervals for AM – MW/LW) until  
you release the button.  
1 Select the band (FM1 – 3, AM).  
FM  
CD  
When an FM stereo broadcast is hard to  
receive:  
FM1  
FM2  
FM3  
AM  
1 Press MODE to enter the functions mode while  
listening to an FM stereo broadcast.  
2 Press MO (monaural), while still in the functions  
mode, so that the MO indicator lights up on the  
display.  
AM  
Note:  
Each time you press the button, the MO  
indicator lights up and goes off alternately.  
This receiver has three FM bands (FM1, FM2,  
FM3). You can use any one of them to listen to an  
FM broadcast.  
MODE  
MO  
2 Press and hold  
¢ or 4  
until  
“M (manual)” starts flashing on the  
display.  
MO  
¢
4
When the MO indicator is lit on the display, the  
sound you hear becomes monaural but the  
reception will be improved (the ST indicator  
goes off).  
Selected band appears.  
3 Tune in to a station you want whileM”  
is flashing.  
To tune in to stations of  
higher frequencies.  
¢
4
To tune in to stations of  
lower frequencies.  
7
Manual preset  
You can preset up to 6 stations in each band (FM1,  
FM2, FM3 and AM) manually.  
Storing stations in memory  
You can use one of the following two methods to  
store broadcasting stations in memory.  
• Automatic preset of FM stations: SSM (Strong-  
station Sequential Memory)  
Ex.: Storing an FM station of 88.3 MHz into the  
preset number 1 of the FM1 band  
• Manual preset of both FM and AM stations  
1 Select the band (FM1 – 3, AM) you  
want to store stations into (in this  
example, FM1).  
FM station automatic preset: SSM  
You can preset 6 local FM stations in each FM band  
(FM1, FM2 and FM3).  
FM  
1 Select the FM band (FM1 – 3) you want  
CD  
FM1  
FM2  
FM3  
to store FM stations into.  
AM  
FM  
AM  
CD  
FM1  
FM2  
FM3  
2 Tune in to a station (in this example,  
AM  
of 88.3 MHz).  
To tune in to stations of  
higher frequencies.  
2 Press and hold both buttons for more  
¢
than 2 seconds.  
4
To tune in to stations of  
lower frequencies.  
¢
4
“SSM” appears, then disappears when automatic  
preset is over.  
Local FM stations with the strongest signals are  
searched and stored automatically in the band  
number you have selected (FM1, FM2 or FM3).  
These stations are preset in the number buttons —  
No.1 (lowest frequency) to No.6 (highest frequency).  
When automatic preset is over, the station stored  
in number button 1 will be automatically tuned in.  
8
Tuning in to a preset station  
3 Press and hold the number button (in  
this example, 1) for more than 2  
seconds.  
You can easily tune in to a preset station.  
Remember that you must store stations first. If you  
have not stored them yet, see “Storing stations in  
memory” on pages 8 and 9.  
7
1 Select the band (FM1 – 3, AM).  
FM  
CD  
FM1  
FM2  
FM3  
“P1” flashes for a few seconds.  
AM  
AM  
4 Repeat the above procedure to store  
other stations into other preset  
numbers.  
2 Select the number (1 – 6) for the preset  
Notes:  
station you want.  
• A previously preset station is erased when a new  
station is stored in the same preset number.  
• Preset stations are erased when the power supply to  
the memory circuit is interrupted (for example, during  
battery replacement). If this occurs, preset the stations  
again.  
7
8 MO  
9
10  
11 RPT  
12 RND  
9
RDS OPERATIONS  
What you can do with RDS  
To use Network-Tracking Reception  
You can select the different modes of network-  
tracking reception to continue listening to the  
same programme in its finest reception.  
RDS (Radio Data System) allows FM stations to  
send an additional signal along with their regular  
programme signals. For example, the stations send  
their station names, as well as information about  
what type of programme they broadcast, such as  
sports or music, etc.  
Another advantage of RDS function is called  
“Enhanced Other Networks.” By using the  
Enhanced Other Networks data sent from a station,  
you can tune in to a different station of a different  
network broadcasting your favourite programme or  
traffic announcement while listening to another  
programme or to another source such as CD.  
When shipped from the factory, “AF” is selected.  
• AF:  
Network-Tracking Reception is  
activated with Regionalization set to  
“off.”  
With this setting, the unit switches to  
another station within the same  
network when the receiving signals  
from the current station become  
weak. (In this mode, the programme  
may differ from the one currently  
received.)  
The AF indicator lights up but the  
REG indicator does not.  
By receiving the RDS data, this unit can do the  
following:  
• Tracing the same programme automatically  
(Network-Tracking Reception)  
• Standby Reception of TA (Traffic Announcement)  
or your favourite programme  
• PTY (Programme Type) search  
• Programme search  
• AF REG: Network-Tracking Reception is  
activated with Regionalization set to  
“on.”  
With this setting, the unit switches to  
another station, within the same  
network, broadcasting the same  
programme when the receiving  
signals from the current station  
become weak.  
• And some other functions  
Tracing the same programme  
automatically (Network-Tracking  
Reception)  
When driving in an area where FM reception is not  
good, the tuner built in this unit automatically tunes  
in to another RDS station, broadcasting the same  
programme with stronger signals. So, you can  
continue to listen to the same programme in its  
finest reception, no matter where you drive.  
(See the illustration on the next page.)  
Both the AF indicator and the REG  
indicator light up.  
• OFF:  
Network-Tracking Reception is  
deactivated.  
Neither the AF indicator nor the REG  
indicator lights up.  
AF indicator  
REG indicator  
AF REG  
Two types of the RDS data are used to make  
Network-Tracking Reception work correctly — PI  
(Programme Identification) and AF (Alternative  
Frequency).  
Without receiving these data correctly from the RDS  
station you are listening to, Network-Tracking  
Reception will not operate.  
10  
Using TA Standby Reception  
TA Standby Reception allows the unit to switch  
temporarily to Traffic Announcement (TA) from the  
current source (another FM station or CD).  
1 Press and hold SEL (select) for more  
than 2 seconds so that one of the  
PSM items appears on the display.  
(PSM: see page 24.)  
TA Standby Reception will not work if you are listening  
to an AM station.  
SEL  
TP/PTY  
2 Select “AF-REG (alternative  
frequency/regionalization  
reception)” if not shown on the  
display.  
Press TP/PTY to activate TA Standby Reception.  
7 When the current source is FM, the TP indicator  
either lights up or flashes.  
• If the TP indicator lights up, TA Standby  
Reception is activated.  
¢
4
If a station starts broadcasting a traffic  
announcement, “TRAFFIC” appears on the  
display, and this unit automatically tunes in to  
the station. The volume changes to the  
preset TA volume level (see page 15) and  
the traffic announcement can be heard.  
• If the TP indicator flashes, TA Standby  
Reception is not yet activated since the  
station being received does not provide the  
signals used for TA Standby Reception.  
To activate TA Standby Reception, you need  
to tune in to another station providing these  
3 Select the desired mode – “AF,”  
“AF REG” or “OFF.”  
signals. Press  
for such a station.  
¢ or 4  
to search  
4 Finish the setting.  
When a station providing these signals is  
tuned in, the TP indicator stops flashing and  
remains lit. Now TA Standby Reception is  
activated.  
SEL  
7 When the current source is other than FM,  
the TP indicator lights up.  
If a station starts broadcasting a traffic  
announcement, “TRAFFIC” appears on the  
display, and this unit automatically changes the  
source and tunes in to the station.  
The same programme can be received on  
different frequencies.  
Programme 1  
broadcasting  
on frequency A  
Programme 1  
broadcasting  
on frequency E  
To deactivate the TA Standby Reception, press  
TP/PTY again.  
Programme 1  
broadcasting  
on frequency B  
Programme 1  
broadcasting  
on frequency C  
Programme 1  
broadcasting  
on frequency D  
11  
Using PTY Standby Reception  
4 Finish the setting.  
PTY Standby Reception allows the unit to switch  
temporarily to your favourite programme (PTY:  
Programme Type) from the current source (another  
FM station or CD).  
SEL  
PTY Standby Reception will not work if you are  
listening to an AM station.  
7 When the current source is FM, the PTY  
indicator either lights up or flashes.  
• If the PTY indicator lights up, PTY  
Standby Reception is activated.  
You can select your favourite programme type for  
PTY Standby Reception.  
If a station starts broadcasting the  
selected PTY programme, this unit  
automatically tunes in to the station.  
• If the PTY indicator flashes, PTY  
Standby Reception is not yet activated  
since the station being received does  
not provide the signals used for PTY  
Standby Reception.  
When shipped from the factory, PTY Standby  
Reception is turned off. (“OFF” is selected for PTY  
Standby Reception.)  
1 Press and hold SEL (select) for more  
than 2 seconds so that one of the  
PSM items appears on the display.  
(PSM: see page 24.)  
To activate PTY Standby Reception,  
you need to tune in to another station  
SEL  
providing these signals. Press  
or 4 to search for such a station.  
¢
When a station providing these signals  
is tuned in, the PTY indicator stops  
flashing and remains lit. Now PTY  
Standby Reception is activated.  
2 Select “PTY STBY (standby)” if not  
shown on the display.  
7 When the current source is other than  
FM, the PTY indicator lights up.  
If a station starts broadcasting the  
selected PTY programme, this unit  
automatically changes the source and  
tunes in to the station.  
¢
4
To deactivate the PTY Standby Reception,  
select “OFF” in step 3 on the left column. The  
PTY indicator disappears.  
3 Select one of the twenty-nine PTY  
codes. (See page 16.)  
Selected code name  
appears on the display  
and is stored into  
memory.  
To cancel the PTY  
Standby Reception,  
select “OFF.”  
12  
Searching your favourite programme  
2 Select one of the twenty-nine PTY  
codes. (See page 16.)  
You can search any one of the PTY codes.  
In addition, you can store your 6 favourite  
programme types in the number buttons.  
When shipped from the factory, the following 6  
programme types have been stored in the number  
buttons (1 to 6).  
Selected code name  
appears on the display.  
To store your favourite programme types, see  
below.  
To search your favourite programme type, see  
page 14.  
3 Press and hold the number button for  
more than 2 seconds to store the PTY  
code selected into the preset number  
you want.  
3
1
2
POP M  
ROCK M  
EASY M  
6
4
5
7
8 MO  
9
10  
11 RPT  
12 RND  
CLASSICS  
AFFAIRS  
VARIED  
To store your favourite programme types  
1 Press and hold TP/PTY for more than  
“MEMORY” and the selected code name  
alternates on the display.  
2 seconds.  
TP/PTY  
4 Press and hold TP/PTY for more than  
2 seconds.  
TP/PTY  
The last selected PTY code appears.  
13  
To search your favourite programme type  
Other convenient RDS functions  
and adjustments  
1 Press and hold TP/PTY for more than  
2 seconds while listening to an FM  
station.  
Automatic selection of the station  
when using the number buttons  
TP/PTY  
Usually when you press the number button, the  
preset station is tuned in.  
However, when the preset station is an RDS station,  
something different will happen. If the signals from  
that preset station are not sufficient for good  
reception, this unit, using the AF data, tunes in to  
another frequency broadcasting the same  
programme as the original preset station is  
broadcasting. (Programme search)  
The last selected PTY code appears.  
2 Select one of the PTY codes.  
• The unit takes some time to tune in to another  
station using Programme search.  
7
8 MO  
9
10  
11 RPT  
12 RND  
To activate Programme search, follow the procedure  
below.  
• See also “Changing the general settings (PSM)”  
on pages 23 and 24.  
OR  
1 Press and hold SEL (select) for more than 2  
seconds so that one of the PSM items appears  
on the display.  
2 Press  
“P(Programme)-SEARCH.”  
¢ or 4  
to select  
3 Press + to select “ON.”  
Now Programme search is activated.  
4 Press SEL (select) to finish the setting.  
To cancel Programme search, repeat the  
same procedure and select “OFF” in step 3 by  
pressing –.  
Ex.: When “ROCK M” is selected  
3 Press  
¢ or 4  
to start PTY  
search for your favourite programme.  
¢
4
• If there is a station broadcasting a programme of  
the same PTY code as you selected, that station  
is tuned in.  
• If there is no station broadcasting a programme  
of the same PTY code as you selected, the  
station will not change.  
Note:  
In some areas, the PTY search will not work correctly.  
14  
Changing the display mode while  
listening to an FM station  
You can change the initial indication on the display  
to station name (PS NAME), station frequency  
(FREQ) or clock time (CLOCK) while listening to  
an FM RDS station.  
Setting the TA volume level  
You can preset the volume level for TA Standby  
Reception. When a traffic programme is received,  
the volume level automatically changes to the preset  
level.  
• See also “Changing the general settings (PSM)”  
on pages 23 and 24.  
• See also “Changing the general settings (PSM)”  
on pages 23 and 24.  
1 Press and hold SEL (select) for more than 2  
seconds so that one of the PSM items appears  
on the display.  
1 Press and hold SEL (select) for more than 2  
seconds so that one of the PSM items appears  
on the display.  
2 Press  
(volume).”  
¢ or 4  
to select “TA VOL  
2 Press  
(display mode).”  
¢ or 4  
to select “DISPMODE  
3 Press + or – to set to the desired volume.  
You can set it from “VOL 00” to “VOL 50.”  
4 Press SEL (select) to finish the setting.  
3 Press + or – to set to the desired indication (“PS  
NAME,” “FREQ” or “CLOCK”).  
4 Press SEL (select) to finish the setting.  
Automatic clock adjustment  
Note:  
By pressing DISP (display), you can change the display  
while listening to an FM RDS station.  
Each time you press the button, the following information  
appears on the display:  
When shipped from the factory, the clock built in  
this unit is set to be readjusted automatically using  
the CT (Clock Time) data in the RDS signal.  
If you do not want to use automatic clock  
adjustment, follow the procedure below.  
• See also “Changing the general settings (PSM)”  
on pages 23 and 24.  
Station name  
(PS NAME)  
1 Press and hold SEL (select) for more than 2  
seconds so that one of the PSM items appears  
on the display.  
Station frequency  
(FREQ)  
2 Press  
(adjustment).”  
3 Press – to select “OFF.”  
¢ or 4  
to select “AUTO ADJ  
Programme type  
(PTY)  
Now automatic clock adjustment is canceled.  
4 Press SEL (select) to finish the setting.  
Clock  
To reactivate clock adjustment, repeat the same  
procedure and select “ON” in step 3 by pressing +.  
Note:  
Then, the display goes back to the original indication  
You must stay tuned to the same station for more than 2  
minutes after setting “AUTO ADJ” to “ON.Otherwise,  
the clock time will not be adjusted. (This is because the  
unit takes up to 2 minutes to capture the CT data in the  
RDS signal.)  
in several seconds.  
15  
PTY codes  
NEWS:  
AFFAIRS:  
News  
CHILDREN: Entertainment programmes for  
children  
Topical programmes expanding  
on current news or affairs  
Programmes which impart advice  
on a wide variety of topics  
Sport events  
SOCIAL:  
Programmes on social activities  
INFO:  
RELIGION: Programmes dealing with any  
aspect of belief or faith, or the  
SPORT:  
nature of existence or ethics  
EDUCATE: Educational programmes  
DRAMA: Radio plays  
PHONE IN: Programmes where people can  
express their views either by  
CULTURE: Programmes on national or  
regional culture  
phone or in a public forum  
TRAVEL:  
LEISURE:  
JAZZ:  
Programmes about travel  
destinations, package tours, and  
travel ideas and opportunities  
Programmes concerned with  
recreational activities such as  
gardening, cooking, fishing, etc.  
Jazz music  
SCIENCE:  
Programmes on natural science  
and technology  
VARIED:  
Other programmes like comedies  
or ceremonies  
POP M:  
Pop music  
ROCK M:  
EASY M:  
LIGHT M:  
Rock music  
Easy-listening music  
Light music  
COUNTRY: Country music  
NATION M: Current popular music from  
another nation or region, in that  
country’s language  
Classic pop music  
Folk music  
DOCUMENT: Programmes dealing with factual  
matters, presented in an  
CLASSICS: Classical music  
OTHER M: Other music  
WEATHER: Weather information  
FINANCE: Reports on commerce, trading,  
the Stock Market, etc.  
OLDIES:  
FOLK M:  
investigative style  
16  
CD OPERATIONS  
FM  
TP/PTY  
CD  
¢
SEL  
SSM  
4
AM  
DISP  
7
MO  
9
10  
11 RPT  
12 RND  
8
MODE  
SCM  
Note:  
Playing a CD  
When a CD is inserted upside down, “EJECT”  
appears on the display and the CD automatically  
ejects.  
1 Insert a disc into the loading slot.  
The unit turns on,  
draws the CD and  
starts playback  
automatically.  
To stop play and eject the CD  
Press 0.  
CD play stops and the CD automatically ejects  
from the loading slot. The source changes to the  
tuner (you will hear the last received station.)  
If you change the source to AM or FM, CD play  
also stops (without ejecting the CD this time).  
Note on One-Touch Operation:  
When a CD is already in the loading slot,  
pressing the CD button turns on the unit and  
starts playback automatically.  
Notes:  
The CD–in indicator flashes.  
• If the ejected disc is not removed for about 15  
seconds, the disc is automatically inserted again  
into the loading slot to protect it from dust.  
(CD play will not start this time.)  
You can eject the CD even when the unit is turned  
off.  
The CD–in indicator lights up.  
Total playing time of Total track number  
the inserted disc  
of the inserted disc  
Elapsed playing time  
Current track  
17  
Locating a track or a particular Selecting CD playback modes  
portion on a CD  
To play back tracks at random  
(Random Play)  
1 Press MODE to enter the functions mode while  
playing a CD. This unit enters the functions  
To fast-forward or reverse the track  
Press and hold  
playing a CD, to fast-forward the  
track.  
¢, while  
mode.  
¢
4
2 Press RND (random), while still in the functions  
mode, so that the RND indicator lights up on  
the display.  
Then, each time you press the button, CD  
random play mode turns on and off alternately.  
Press and hold 4  
playing a CD, to reverse the  
track.  
, while  
12  
RND  
MODE  
To go to the next tracks or the previous  
tracks  
Press  
¢ briefly, while  
playing a CD, to go ahead to the  
beginning of the next track.  
Each time you press the button  
consecutively, the beginning of  
the next tracks is located and  
played back.  
¢
4
The RND indicator  
When the random mode is turned on, the RND  
indicator lights up on the display and a track  
randomly selected starts playing.  
Press 4  
briefly, while  
playing a CD, to go back to the  
beginning of the current track.  
Each time you press the button  
consecutively, the beginning of  
the previous tracks is located  
and played back.  
To go to a particular track directly  
7
8 MO  
9
10  
11 RPT  
12 RND  
Press the number button corresponding to the  
track number to start its playback.  
To select a track number from 1 – 6:  
Press 1 (7) – 6 (12) briefly.  
To select a track number from 7 – 12:  
Press and hold 1 (7) – 6 (12) for more than 1  
second.  
18  
To play back tracks repeatedly  
(Repeat Play)  
Prohibiting CD ejection  
You can prohibit CD ejection and can lock a CD  
in the loading slot.  
1 Press MODE to enter the functions mode while  
playing a CD. This unit enters the functions  
mode.  
2 Press RPT (repeat), while still in the functions  
mode, so that the RPT indicator lights up on  
the display.  
While pressing CD, press and hold 0 for  
more than 2 seconds.  
Then, each time you press the button, CD  
repeat play mode turns on and off alternately.  
CD  
11  
RPT  
MODE  
The RPT indicator  
“EJECT” flashes on the display for about 5  
seconds, and the CD is locked and cannot be  
ejected.  
Track number of the  
currently playing track  
To cancel the prohibition and unlock the CD,  
press 0 again for more than 2 seconds, while  
pressing CD.  
When the repeat mode is turned on, the RPT  
indicator lights up on the display.  
“EJECT” appears on the display, and the CD  
ejects from the loading slot.  
19  
SOUND ADJUSTMENTS  
2 Adjust the level.  
Adjusting the sound  
You can adjust the sound characteristics to your  
preference.  
To increase the level.  
1 Select the item you want to adjust.  
Each time you press the  
To decrease the level.  
button, the adjustable items  
change as follows:  
SEL  
BAS  
TRE  
FAD  
(bass)  
(treble)  
(fader)  
VOL  
LOUD  
BAL  
(volume)  
(loudness)  
(balance)  
Note:  
Normally, the + and – buttons work as the volume  
control. So you do not have to select “VOL” to adjust  
the volume level.  
Indication  
To do:  
Range  
BAS  
TRE  
FAD*  
BAL  
Adjust the bass.  
–06 (min.)  
|
+06 (max.)  
Adjust the treble.  
–06 (min.)  
|
+06 (max.)  
Adjust the front  
and rear speaker  
balance.  
R06 (Rear only)  
|
F06 (Front only)  
Adjust the left  
and right speaker  
balance.  
L06 (Left only)  
|
R06 (Right only)  
LOUD  
Boost low and high  
frequencies to  
produce a well-  
balanced sound  
at low volume  
level.  
LOUD ON  
|
LOUD OFF  
VOL  
Adjust the volume. 00 (min.)  
|
50 (max.)  
* If you are using a two-speaker system, set the fader  
level to “00.”  
20  
Indication  
For:  
Preset values  
Using the sound control memory  
(SCM)  
BAS  
TRE  
LOUD  
SCM OFF (Flat sound) 00  
00  
ON  
BEAT  
SOFT  
Rock or  
disco music  
+02  
+01  
00  
ON  
You can select and store a preset sound  
adjustment suitable for each playback source  
(Advanced SCM).  
Quiet  
background  
music  
–03  
+01  
OFF  
OFF  
Selecting and storing the sound modes  
POP  
Light music +04  
Once you select a sound mode, it is stored in  
memory. It will be recalled every time you select  
the same source and will be shown on the display.  
A sound mode can be stored for each of the  
following sources – FM1, FM2, FM3, AM, and CD.  
• If you do not want to store the sound mode  
separately for each playback source, but want  
to use the same sound mode for all the sources,  
see “To cancel Advanced SCM – SCM LINK” on  
page 25.  
Recalling the sound modes  
When “SCM LINK” is set to “LINK ON,”  
select the source.  
FM  
CD  
Select the sound mode you want.  
Each time you change the  
playback source, the SCM  
AM  
SCM  
indicator flashes on the display.  
Ex.: When you select “BEAT”  
The sound mode stored in memory for the  
selected source is recalled.  
Each time you press the button, the sound mode  
changes as follows:  
Notes:  
SOFT  
SCM OFF  
BEAT  
POP  
You can adjust each sound mode to your preference,  
and store it in memory.  
If you want to adjust and store your original sound  
mode, see “Storing your own sound adjustments”  
on page 22.  
To adjust the bass and treble reinforcement levels or  
to turn on/off the loudness function temporarily, see  
page 20. (Your adjustments will be canceled if  
another source is selected.)  
• When “SCM LINK” is set to “LINK ON” (see page  
25), the selected sound mode can be stored in  
memory for the current source and the effect  
applies only to the current source.  
• When “SCM LINK” is set to “LINK OFF,” the  
selected sound mode effect applies to any source.  
21  
Storing your own sound  
adjustments  
3 Adjust the bass or treble, or turn the  
loudness function ON/OFF.  
• See page 20 for details.  
You can adjust the sound modes (BEAT, SOFT,  
POP) to your preference and store your own  
adjustments in memory.  
• There is a time limit in doing the following  
procedure. If the setting is canceled before you  
finish, start from step 1 again.  
1 Call up the sound mode you want to  
adjust.  
• See “Using the sound control memory  
(SCM)” on page 21 for details.  
SCM  
4 Repeat steps 2 and 3 to adjust the  
other items.  
5 Press and hold SCM until the sound  
mode you have selected in step 1  
flashes on the display.  
Ex.: When you select “SOFT”  
SCM  
2 Select “BAS (bass)”, “TRE (treble)” or  
“LOUD (loudness)”.  
SEL  
Your adjustment made for the selected  
sound mode is stored in memory.  
6 Repeat the same procedure to store  
other sound modes.  
To reset to the factory settings  
Repeat the same procedure and reassign the  
preset values listed in the table on page 21.  
22  
OTHER MAIN FUNCTIONS  
Setting the clock  
5 Finish the setting.  
You can also set the clock system to either 24 hours  
or 12 hours.  
SEL  
1 Press and hold SEL (select) for more  
than 2 seconds so that one of the PSM  
items appears on the display.  
(See page 24.)  
To check the current clock time (changing  
the display mode)  
Press DISP (display) repeatedly. Each time you  
press the button, the display mode changes as  
follows:  
SEL  
• During tuner operation:  
Frequency  
Clock  
Note:  
2 Set the hour.  
For the indication change during RDS operation,  
see page 15.  
1 Select “CLOCK H (hour)” if not shown on  
the display.  
2 Adjust the hour.  
• During CD operation:  
1
2
Elapsed playing time  
Clock  
During power off  
The power turns on, the clock time is shown for  
5 seconds, then the power turns off.  
¢
4
Changing the general settings  
(PSM)  
3 Set the minute.  
1 Select “CLOCK M (minute).”  
You can change the items listed on the next page  
by using the PSM (Preferred Setting Mode) control.  
2 Adjust the minute.  
1
2
Basic Procedure  
¢
4
1 Press and hold SEL (select) for more  
than 2 seconds so that one of the PSM  
items appears on the display.  
(See page 24.)  
4 Set the clock system.  
1 Select “24H/12H.”  
SEL  
2 Select “24H” or “12H.”  
1
2
2 Select the PSM item you want to  
adjust. (See page 24.)  
¢
4
¢
4
CONTINUED ON THE NEXT PAGE  
23  
3 Adjust the PSM item selected.  
4 Repeat steps 2 and 3 to adjust the  
other PSM items if necessary.  
5 Finish the setting.  
SEL  
Preferred Setting Mode (PSM) items  
1
2
3
¢
4
SEL  
Factory-preset See  
Set.  
settings  
page  
Hold.  
Select.  
+
CLOCK H  
CLOCK M  
SCM LINK  
Hour adjustment  
Minute adjustment  
Back  
Back  
Advance  
Advance  
0:00  
23  
Sound control  
memory linkage  
LINK OFF  
12H  
LINK ON  
24H  
LINK ON  
24H  
21, 25  
23  
24H/12H  
24/12-hour time  
display  
AUTO ADJ  
DISPMODE  
Automatic clock  
setting  
OFF  
ON  
ON  
PS NAME  
AF  
15  
15  
10  
Display mode  
CLOCK  
PS NAME  
FREQ  
AF-REG  
Alternate frequency/  
Regionalization  
reception  
AF  
AF REG  
OFF  
29 programme types  
(see page 16)  
OFF  
PTY STBY  
TA VOL  
PTY standby  
OFF  
12  
Traffic announcement  
volume  
VOL 00 – VOL 50  
VOL 20  
OFF  
15  
14  
P-SEARCH  
LEVEL  
Programme search  
Level display  
OFF  
ON  
For KD-S871R:  
AUDIO 2  
AUDIO 1  
AUDIO 2  
25  
OFF  
For KD-S723R and KD-S721R:  
VOL1  
VOL 2  
VOL2  
OFF  
25  
25  
OFF  
OFF  
MUTING 2  
MUTING 1  
TEL  
Telephone muting  
Press SEL (select) to finish the setting.  
24  
To cancel Advanced SCM – SCM LINK  
Selecting the color of the  
display window  
You can cancel theAdvanced SCM (Sound Control  
Memory), and unlink the sound modes and the  
playback sources.  
This section is only for KD-S871R.  
When shipped from the factory, a different sound  
mode can be stored in memory for each source so  
that you can change the sound modes simply by  
changing the sources.  
You can select the color of the display window  
according to your preference.  
When shipped from the factory, “ALL DEMO” is  
selected.  
• ALL DEMO: The color changes every 30  
seconds.  
• LINK ON: Advanced SCM (different sound  
modes for different sources.)  
• LINK OFF: Conventional SCM (one sound  
mode for all sources.)  
• SOURCE:  
The color changes according to the  
source you choose (FM, CD or  
AM).  
• BLUE 1:  
• BLUE 2:  
Blue color 1.  
Blue color 2.  
• PURPLE 1: Purple color 1.  
• PURPLE 2: Purple color 2.  
To select the level meter – LEVEL  
You can select the level display according to your  
preference.  
• RED 1:  
• RED 2:  
Red color 1.  
Red color 2.  
For KD-S871R  
When shipped from the factory, “AUDIO 2” is  
selected.  
1 Press and hold DISP (display) for  
more than 2 seconds so that one of  
the colors listed above appears on  
the display.  
• AUDIO 1: Level meter illuminates.  
• AUDIO 2: Alternates level meter and  
illumination display.  
DISP  
• OFF:  
Erases the audio level indicator.  
For KD-S723R and KD-S721R  
When shipped from the factory, “VOL2” is selected.  
2 Select the color you want to adjust.  
• VOL1:  
• VOL2:  
Shows the volume level indicator.  
Alternates “VOL1” setting and  
illumination display.  
¢
4
• OFF:  
Erases the volume level indicator.  
To select the telephone muting – TEL  
This mode is used when a cellular phone system is  
connected. Depending on the phone system used,  
select either “MUTING 1” or “MUTING 2,” whichever  
mutes the sounds from this unit.  
When shipped from the factory, this mode is  
deactivated.  
3 Finish the setting.  
DISP  
• MUTING 1: Select this if this setting can mute  
the sounds.  
• MUTING 2: Select this if this setting can mute  
the sounds.  
• OFF:  
Cancels the telephone muting.  
25  
Attaching the control panel  
Detaching the control panel  
1 Insert the left side of the control panel  
You can detach the contol panel when leaving the  
car.  
into the groove on the panel holder.  
When detaching or attaching the control panel,  
be careful not to damage the connectors on the  
back of the control panel and on the panel holder.  
Detaching the control panel  
Before detaching the control panel, be sure to turn  
off the power.  
1 Unlock the control panel.  
2 Press the right side of the control  
panel to fix it to the panel holder.  
2 Lift and pull the control panel out of  
the unit.  
Note on cleaning the connectors:  
If you frequently detach the control panel, the  
connectors will deteriorate.  
To minimize this possibility, periodically wipe the  
connectors with a cotton swab or cloth moistened  
with alcohol, being careful not to damage the  
connectors.  
3 Put the detached control panel into the  
provided case.  
Connectors  
26  
USING THE REMOTE CONTROLLER  
This section is only for KD-S871R.  
2. Place the battery.  
Slide the battery into the holder with the + side  
facing upwards so that the battery is fixed in  
This unit can be remotely controlled as instructed  
here (with an optionally purchased remote  
controller.) We recommend that you use remote  
controller RM-RK31 or RM-RK50 with your unit.  
the holder.  
Lithium coin battery  
(product number:  
CR2025)  
(Ex.: When you are using RM-RK31)  
Before using the remote controller:  
• Aim the remote controller directly at the remote  
sensor on the main unit. Make sure there is no  
obstacle in between.  
3. Return the battery holder.  
Insert again the battery holder pushing it until  
you hear a clicking sound.  
(back side)  
TP/PTY  
SEL  
DISP  
7
8
MO  
9
Remote sensor  
WARNING:  
• Store the battery in a place where children cannot  
reach.  
• Do not expose the remote sensor to strong  
light (direct sunlight or artificial lighting.)  
If a child accidentally swallows the battery,  
consult a doctor immediately.  
• Do not recharge, short, disassemble or heat the  
battery or dispose it in a fire.  
Doing any of these things may cause the battery to  
give off heat, crack or start a fire.  
• Do not leave the battery with other metallic  
materials.  
Installing the battery  
When the controllable range or effectiveness of the  
remote controller decreases, replace the battery.  
1. Remove the battery holder.  
1) Push out the battery holder in the direction  
indicated by the arrow using a ball-point  
pen or a similar tool.  
Doing this may cause the battery to give off heat,  
crack or start a fire.  
• When throwing away or saving the battery, wrap it  
in tape and insulate; otherwise, the battery may  
start to give off heat, crack or start a fire.  
• Do not poke the battery with tweezers or similar  
tools.  
2) Remove the battery holder.  
(back side)  
Doing this may cause the battery to give off heat,  
crack or start a fire.  
1)  
2)  
CAUTION:  
DO NOT leave the remote controller in a place (such  
as dashboards) exposed to direct sunlight for a long  
time.  
27  
3 • Functions as the PRESET button while  
listening to the radio.  
Location of the buttons  
Each time you press the button, the preset  
station number increases, and the selected  
station is tuned in.  
RM-RK31  
• Does not function as the DISC – button.  
4 Functions the same as the + and – buttons on  
the main unit.  
NOTE: This button does not function for the  
preferred setting mode adjustment.  
5 Selects the sound mode.  
Each time you press the button, the mode  
changes.  
6 Selects the source.  
5
6
1
2
3
7
Each time you press the button, the source  
changes.  
4
7 • Searches stations while listening to the radio.  
• Fast-forwards or reverses the track if pressed  
and held while listening to a CD.  
• Skips to the beginning of the next track or goes  
back to the beginning of the current (or  
previous tracks) if pressed briefly while  
listening to a CD.  
1 • Turns on the unit if pressed when the unit is  
turned off.  
• Turns off the unit if pressed and held for more  
than 1 second.  
• Drops the volume level in a moment if pressed  
briefly.  
Press again to resume the volume.  
2 • Functions as the BAND button while listening  
to the radio.  
Each time you press the button, the band  
changes.  
• Does not function as the PROG/DISC +  
button.  
28  
MAINTENANCE  
Moisture condensation  
Handling CDs  
Moisture may condense on the lens inside the  
CD player in the following cases:  
This unit has been designed to reproduce CDs  
and CD-Rs.  
• Other discs cannot be played back.  
• After starting the heater in the car.  
• If it becomes very humid inside the car.  
Should this occur, the CD player may  
malfunction. In this case, eject the CD and leave  
the unit turned on for a few hours until the  
moisture evaporates.  
How to handle CDs  
When removing a CD from  
its case, press down the  
Center holder  
center holder of the case  
and lift the CD out,  
holding it by the edges.  
• Always hold the CD by  
the edges. Do not touch its recording surface.  
When playing a CD-R (Recordable)  
You can play back your original CD-Rs on this  
receiver.  
• Before playing back CD-Rs, read their  
instructions or cautions carefully.  
• Some CD-Rs recorded on CD recorders may  
not be played back on this receiver because of  
their disc characteristics, and of the following  
reasons:  
When storing a CD into its case, gently insert the  
CD around the center holder (with the printed  
surface facing up).  
• Make sure to store CDs into the cases after  
use.  
– Discs are dirty or scratched.  
– Moisture condensation occurs on the lens  
inside the unit.  
– The pickup lens inside the CD player is dirty.  
• Use only “finalized” CD-Rs.  
• CD-RWs (Rewritable) cannot be played back  
on this receiver.  
• Do not use CD-Rs with stickers or sticking  
labels on the surface. They may cause  
malfunctions.  
To keep CDs clean  
A dirty CD may not play  
correctly. If a CD does  
become dirty, wipe it with a  
soft cloth in a straight line  
from center to edge.  
To play new CDs  
New CDs may have some  
rough spots around the  
inner and outer edges. If  
such a CD is used, this unit  
may reject the CD.  
To remove these rough  
spots, rub the edges with a  
pencil or ball-point pen, etc.  
CAUTIONS:  
• Do not insert 8 cm CDs (single CDs) into the  
loading slot. (Such CDs cannot be ejected.)  
• Do not insert any CD of unusual shape — like a  
heart or flower; otherwise, it will cause a  
malfunction.  
• Do not expose CDs to direct sunlight or any heat  
source or place them in a place subject to high  
temperature and humidity. Do not leave them in  
a car.  
About mistracking:  
• Do not use any solvent (for example,  
conventional record cleaner, spray, thinner,  
benzine, etc.) to clean CDs.  
Mistracking may result from driving on extremely  
rough roads. This does not damage the unit and  
the CD, but will be annoying.  
We recommend that you stop CD play while  
driving on such rough roads.  
29  
TROUBLESHOOTING  
What appears to be trouble is not always serious. Check the following points before calling a service  
center.  
Symptoms  
Causes  
Remedies  
• CD cannot be played back.  
CD is inserted upside down.  
Insert the CD correctly.  
Stop playing CD while driving on  
rough roads.  
• CD sound is sometimes  
interrupted.  
You are driving on rough roads.  
Change the disc.  
The disc is scratched.  
Check the cords and  
connections.  
Connections are incorrect.  
Check the cords and  
connections.  
• Sound is sometimes  
interrupted.  
Connections are incorrect.  
Adjust it to the optimum level.  
• Sound cannot be heard from  
the speakers.  
The volume is turned to the  
minimum level.  
Check the cords and  
connections.  
Connections are incorrect.  
Store stations manually.  
• SSM (Strong-station  
Sequential Memory)  
automatic preset does not  
work.  
Signals are too weak.  
Connect the antenna firmly.  
Insert a CD correctly.  
• Static noise while listening to  
the radio.  
The antenna is not connected  
firmly.  
• “NO DISC” appears on the  
display.  
No CD is inserted.  
• CD cannot be ejected.  
CD is locked.  
Unlock the CD (see page 19).  
• CD can neither be played  
back nor ejected.  
The unit may function  
incorrectly.  
Press and hold both  
and 0 at the same time for  
several seconds. Be careful not  
to drop the CD when it is  
ejected.  
• This unit does not work at all.  
The built-in microcomputer may  
function incorrectly due to noise,  
etc.  
Press and hold both SEL and  
at the same time for  
several seconds to reset the  
unit. (The clock setting and  
preset stations stored in  
memory are erased.)  
(See page 2.)  
30  
SPECIFICATIONS  
CD PLAYER SECTION  
AUDIO AMPLIFIER SECTION  
Maximum Power Output:  
Type: Compact disc player  
Front:  
Rear:  
45 W per channel  
45 W per channel  
Signal Detection System: Non-contact optical  
pickup (semiconductor laser)  
Continuous Power Output (RMS):  
Number of channels: 2 channels (stereo)  
Frequency Response: 5 Hz to 20 000 Hz  
Front:  
17 W per channel into 4 , 40 Hz  
to 20 000 Hz at no more than  
0.8% total harmonic distortion.  
17 W per channel into 4 , 40 Hz  
to 20 000 Hz at no more than  
0.8% total harmonic distortion.  
Dynamic Range:  
96 dB  
Signal-to-Noise Ratio: 98 dB  
Wow and Flutter: Less than measurable limit  
Rear:  
Load Impedance: 4 (4 to 8 allowance)  
GENERAL  
Power Requirement:  
Tone Control Range:  
Bass:  
±10 dB at 100 Hz  
Operating Voltage: DC 14.4 V  
Treble: ±10 dB at 10 kHz  
Frequency Response: 40 Hz to 20 000 Hz  
Signal-to-Noise Ratio: 70 dB  
Line-Out Level/Impedance:  
2.0 V/20 kload (full scale)  
Output Impedance: 1 kΩ  
(11 V to 16 V allowance)  
Grounding System: Negative ground  
Allowable Operating Temperature: 0°C to +40°C  
Dimensions (W × H × D):  
Installation Size: 182 mm × 52 mm × 150 mm  
Panel Size: 188 mm × 58 mm × 14 mm  
Mass: 1.3 kg (excluding accessories)  
TUNER SECTION  
Frequency Range:  
FM:  
AM:  
87.5 MHz to 108.0 MHz  
(MW) 522 kHz to 1 620 kHz  
(LW) 144 kHz to 279 kHz  
Design and specifications subject to change without  
notice.  
[FM Tuner]  
Usable Sensitivity: 11.3 dBf (1.0 µV/75 )  
50 dB Quieting Sensitivity:  
16.3 dBf (1.8 µV/75 )  
Alternate Channel Selectivity (400 kHz):  
65 dB  
Frequency Response: 40 Hz to 15 000 Hz  
Stereo Separation: 30 dB  
Capture Ratio: 1.5 dB  
[MW Tuner]  
Sensitivity: 20 µV  
Selectivity: 35 dB  
[LW Tuner]  
Sensitivity: 50 µV  
31  
Having TROUBLE with operation?  
Please reset your unit  
Refer to page of How to reset your unit  
Haben Sie PROBLEME mit dem Betrieb?  
Bitte setzen Sie Ihr Gerät zurück  
Siehe Seite Zurücksetzen des Geräts  
Vous avez des PROBLÈMES de fonctionnement?  
Réinitialisez votre appareil  
Référez-vous à la page intitulée Comment réinitialiser votre appareil  
Hebt u PROBLEMEN met de bediening?  
Stel het apparaat terug  
Zie de pagina met de paragraaf Het apparaat terugstellen  
VICTOR COMPANY OF JAPAN, LIMITED  
EN, GE, FR, NL  
1201KKSMDTJEIN  
J
C
V

MTD 246 315D000 User Manual
Motorola NULL V505 User Manual
Motorola MOTORAZR2 V9 User Manual
McCulloch MCS2003 User Manual
JVC RV B55 GY User Manual
JVC KD PDR40 User Manual
HTC P6500 SEDN100 User Manual
EarthQuake 9050300 User Manual
Blackberry Curve 8900 User Manual
B&K AVP1030 User Manual