CD RECEIVER
KD-S33
KD-S33
RECEPTOR CON CD
For canceling the display demonstration, see page 7.
Para cancelar la demostración en pantalla, consulte la página 7.
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
For customer Use:
Enter below the Model
No. and Serial No. which
are located on the top or
bottom of the cabinet. Retain
this information for future
reference.
INSTRUCTIONS
Model No.
Serial No.
MANUAL DE INSTRUCCIONES
GET0401-001A
[J]
The following marks are used to indicate...
: Built-in CD player operations.
CONTENTS
: External CD changer operations.
Control panel .................................
Remote controller — RM-RK50 ............
4
5
: Indicator displayed for the
corresponding operation.
Getting started...............................
Basic operations.................................................
6
6
How to reset your unit
Radio operations ............................
7
Disc operations...............................
Playing a disc in the unit ...................................
Playing discs in the CD changer .........................
8
8
9
• Your preset adjustments will also be erased.
• If a disc is loaded, it will eject. Be careful not to drop the
disc.
Sound adjustments......................... 11
General settings — PSM ................. 12
Satellite radio operations................ 15
iPod®/D. player operations .............. 18
Other external component operations ... 20
More about this unit ....................... 20
Maintenance .................................. 23
Troubleshooting............................. 24
Specifications................................. 27
How to forcibly eject a disc
• If this does not work, reset your unit.
• Be careful not to drop the disc when it ejects.
How to use the MODE button
If you press MODE, the unit goes into functions mode,
then the number buttons and 5/∞ buttons work as
different function buttons.
Detaching the control panel
Ex.: When number button 2 works as
MO (monaural) button.
Attaching the control panel
Time countdown indicator
To use these buttons for their original functions
again after pressing MODE, wait for 5 seconds
without pressing any of these buttons until the
functions mode is cleared or press MODE again.
3
Control panel
Parts identification
Display window
1 4 /¢ buttons
o
;
a
DISP (display) button
2
(standby/on attenuator) button
(control panel release) button
Disc information indicators—TAG (ID3 Tag),
(folder), (track/file)
3 5 (up) / ∞ (down) buttons
4
Loading slot
5
Display window
s
d
Disc type indicators—WMA, MP3
Playback source indicators—
6 0 (eject) button
7
EQ (equalizer) button
Remote sensor
CH: Lights up only when CD-CH is selected as the
playback source.
8
DO NOT expose the remote sensor to strong light
(direct sunlight or artificial lighting).
SRC (source) button
BAND button
Control dial
DISC: Lights up for the built-in CD player.
Playback mode / item indicators— RND (random),
(disc), (folder), RPT (repeat)
LOUD (loudness) indicator
f
9
p
q
w
e
r
t
y
u
i
g
h
j
EQ (equalizer) indicator
SEL (select) button
Sound mode (C-EQ: custom equalizer) indicators—
JAZZ, CLASSIC, HIP HOP, POPS, ROCK, USER
Tr (track) indicator
Source display / Volume level indicator
Main display
MO (monaural) button
SSM (Strong-station Sequential Memory) button
Number buttons
RPT (repeat) button
RND (random) button
MODE button
k
l
/
z
Tuner reception indicators—ST (stereo),
MO (monaural)
4
Main elements and features
Remote controller —
RM-RK50
Installing the lithium coin battery
(CR2025)
For USA-California Only:
This product contains a CR Coin Cell Lithium Battery
which contains Perchlorate Material—special
handling may apply.
1
(standby/on/attenuator) button
• Turns the power on if pressed briefly or
attenuates the sound when the power is on.
• Turns the power off if pressed and held.
Aim the remote controller directly at the remote
sensor on the unit. Make sure there is no obstacle
in between.
2 5 U (up) / D (down) ∞ buttons
• Changes the FM/AM bands with 5 U.
• Changes the preset stations with D ∞.
• Changes the folder of the MP3/WMA discs.
• While playing an MP3 disc on an
MP3-compatible CD changer:
Warning:
– Changes the disc if pressed briefly.
– Changes the folder if pressed and held.
• While listening to the satellite (SIRIUS or XM)
radio:
• Do not install any battery other than CR2025 or
its equivalent; otherwise, it may explode.
• Do not leave the remote controller in a place
(such as dashboards) exposed to direct sunlight
for a long time; otherwise, it may explode.
• Store the battery in a place where children
cannot reach to avoid risk of accident.
• To prevent the battery from over-heating,
cracking, or starting a fire:
– Do not recharge, short, disassemble, heat the
battery, or dispose of it in a fire.
– Do not leave the battery with other metallic
materials.
– Changes the categories.
• While listening to an Apple iPod or a JVC
®
D. player:
– Pauses/stops or resumes playback with D ∞.
– Enters the main menu with 5 U.
(Now 5 U/D ∞/2 R/F 3 work as the menu
selecting buttons.)*
VOL – / VOL + buttons
• Adjusts the volume level.
3
– Do not poke the battery with tweezers or similar
tools.
– Wrap the battery with tape and insulate when
throwing away or saving it.
* 5 U : Returns to the previous menu.
D ∞ : Confirms the selection.
Continued on the next page
5
4
5
SOUND button
• Selects the sound mode (C-EQ: custom
equalizer).
SOURCE button
• Selects the source.
!
• For FM/AM tuner
• For SIRIUS radio
• For XM radio
6 2 R (reverse) / F (forward) 3 buttons
• Searches for stations if pressed briefly.
• Fast-forwards or reverses the track if pressed and
held.
• Changes the tracks if pressed briefly.
• While listening to the satellite radio:
– Changes the channels if pressed briefly.
– Changes the channels rapidly if pressed and
held.
• While listening to an iPod or a D. player (in menu ⁄ Adjust the volume.
selecting mode):
– Selects an item if pressed briefly. (Then, press
D ∞ to confirm the selection.)
– Skips 10 items at a time if pressed and held.
Volume level appears.
Getting started
Volume level indicator
Basic operations
@ Adjust the sound as you want. (See
~ Turn on the power.
pages 11 and 12.)
Caution on volume setting:
Ÿ
Discs produce very little noise compared with other
sources. Lower the volume before playing a disc
to avoid damaging the speakers by the sudden
increase of the output level.
To drop the volume in a
moment (ATT)
To restore the sound, press it
again.
* You cannot select these sources if they are not
ready or not connected.
To turn off the power
6
! Start searching for a station.
Basic settings
• See also “General settings — PSM” on pages
12 – 14.
When a station is received, searching stops.
To stop searching, press the same button
again.
1
2
To tune in to a station manually
In step ! above...
1
1 Canceling the display demonstrations
Select “DEMO,” then “DEMO OFF.”
2 Setting the clock
Select “CLOCK H” (hour), then adjust the hour.
Select “CLOCK M” (minute), then adjust the
minute.
2
Select a desired station frequency.
3
Finish the procedure.
To check the current clock
time when the power is
turned off
When an FM stereo broadcast is hard to
receive
Radio operations
Lights up when monaural mode is activated.
~
Ÿ
Reception improves, but stereo effect will be lost.
To restore the stereo effect, repeat the same
procedure. “MONO OFF” appears and the MO indicator
goes off.
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
Selected band appears.
7
Storing stations in memory
Listening to a preset station
You can preset six stations for each band.
1
2
FM station automatic presetting—
SSM (Strong-station Sequential
Memory)
Select the preset station (1 – 6) you want.
1
Select the FM band (FM1 – FM3) you want to
store into.
or
2
3
To check the other information while
listening to an FM or AM station
Clock Ô Frequency
“SSM” flashes, then disappears when automatic
presetting is over.
Disc operations
Local FM stations with the strongest signals are
searched and stored automatically in the FM band.
Playing a disc in the unit
All tracks will be played repeatedly until you change the
source or eject the disc.
Manual presetting
Ex.: Storing FM station of 92.5 MHz into preset
number 4 of the FM1 band.
1
2
To stop play and eject the
disc
3
Preset number flashes for a while.
8
To fast-forward or reverse the track
To go to the next or previous tracks
Playing discs in the CD changer
All discs in the magazine will be played repeatedly until
you change the source.
• Ejecting the magazine will also stop playing.
~
* If you have changed the external input setting
to “EXT IN” (see page 14), you cannot select the
CD changer.
To go to the next or previous folders (only for
MP3 or WMA discs)
Ÿ Select a disc.
For disc number from 01 – 06:
For MP3 discs:
For WMA discs:
For disc number from 07 – 12:
To locate a particular track (for CD) or folder
(for MP3 or WMA discs) directly
About MP3 and WMA discs
To select a number from 01 – 06:
MP3 and WMA “tracks” (words “file” and “track” are
used interchangeably) are recorded in “folders.”
To select a number from 07 – 12:
About the CD changer
It is recommended to use a JVC MP3-compatible CD
changer with your unit.
• You can also connect other CH-X series CD changers
(except CH-X99 and CH-X100). These units are not
compatible with MP3 discs.
• You cannot play any WMA disc in the CD changer.
• You cannot use the KD-MK series CD changers with
this unit.
• To use direct folder access on MP3/WMA discs, it
is required that folders are assigned with 2-digit
numbers at the beginning of their folder names—
01, 02, 03, and so on.
• Disc text information recorded in the CD Text can be
displayed when a JVC CD Text compatible CD changer
is connected.
To select a particular track in a
folder (for MP3 or WMA discs):
• For connection, see Installation/Connection Manual
(separate volume).
9
Other main functions
Changing the display information
Skipping tracks quickly during play
While playing an audio CD or a CD
Text
Only possible on JVC
MP3-compatible CD changer
• For MP3 or WMA discs, you can skip tracks within the
same folder.
Ex.: To select track 32 while playing a track whose
number is a single digit (1 to 9)
2
*
While playing an MP3 or a WMA disc
• When “TAG DISP” is set to “TAG ON”
(see page 14)
1
2
• When “TAG DISP” is set to “TAG OFF”
Each time you press the button, you can skip 10
tracks.
• After the last track, the first track will be selected
and vice versa.
3
: Clock with the current track number
: Elapsed playing time with the current
track number
Prohibiting disc ejection
You can lock a disc in the loading slot.
1
2
3
*
*
*
If the current disc is an audio CD, “NO NAME” appears.
Only for the built-in CD player.
If an MP3/WMA file does not have Tag information,
folder name and file name appear. In this case, the
TAG indicator will not light up.
To cancel the prohibition, repeat the same
procedure.
10
Selecting the playback modes
Sound adjustments
You can select a preset sound mode suitable to the
music genre (C-EQ: custom equalizer).
You can use only one of the following playback modes
at a time.
1
2
Select your desired playback mode.
Repeat play
7
Ex.: When “ROCK” is selected
Mode
Plays repeatedly
Preset values
TRK RPT
: The current track.
BAS
TRE
LOUD
FLDR RPT*1 : All tracks of the current folder.
(bass) (treble) (loudness)
Indication (For)
USER
(Flat sound)
DISC RPT*2 : All tracks of the current disc.
00
+03 +01
+01 –02
+04 +01
+02 00
+02 +03
00
OFF
ON
ROCK
(Rock or disco music)
RPT OFF
: Cancels.
7
Random play
CLASSIC
(Classical music)
OFF
OFF
ON
Mode
Plays at random
POPS
(Light music)
FLDR RND*1 : All tracks of the current folder,
then tracks of the next folder and
so on.
HIP HOP
(Funk or rap music)
DISC RND : All tracks of the current disc.
JAZZ
(Jazz music)
OFF
MAG RND*2 : All tracks of the inserted discs.
RND OFF : Cancels.
1
*
*
Only while playing an MP3 or a WMA disc.
Only while playing discs in the CD changer.
Adjusting the sound
2
You can adjust the sound characteristics to your
preference.
1
Continued on the next page
11
2
General settings — PSM
You can change PSM (Preferred Setting Mode) items
(except “SID”) listed in the table that follows.
Indication [Range]
1
BAS*1 (bass)
Adjust the bass. [–06 to +06]
TRE*1 (treble)
Adjust the treble. [–06 to +06]
2
Select a PSM item.
FAD*2 (fader)
Adjust the front and rear speaker balance. [R06 to F06]
BAL*3 (balance)
Adjust the left and right speaker balance.
[L06 to R06]
LOUD*1 (loudness)
Ex.: When “DIMMER” is selected
Boost low and high frequencies to produce a well-
balanced sound at low volume level. [LOUD ON or
LOUD OFF]
3
Adjust the PSM item selected.
SUB.W*4 (subwoofer)
Adjust the subwoofer output level. [00 to 08]
4
5
Repeat steps 2 and 3 to adjust other PSM
items if necessary.
VOL (volume)
Adjust the volume. [00 to 30 or 50*5]
1
Finish the procedure.
*
When you adjust the bass, treble, or loudness, the
adjustment you have made is stored for the currently
selected sound mode (C-EQ) including “USER.”
If you are using a two-speaker system, set the fader
level to “00.”
This adjustment cannot affect the subwoofer output.
This takes effect only when a subwoofer is connected.
Displayed only when “L/O MODE” is set to “WOOFER”
(see page 14).
2
*
3
4
*
*
5
*
Depending on the amplifier gain control setting. (See
page 14 for details.)
12
Indication
Item
Setting, [reference page]
(
: Initial)
DEMO
Display demonstration
• DEMO ON
:
:
Display demonstration will be activated automatically if no
operation is done for about 20 seconds, [7].
Cancels.
• DEMO OFF
CLOCK H
1 – 12
[Initial: 1 (1:00)], [7]
Hour adjustment
CLOCK M
00 – 59
[Initial: 00 (1:00)], [7]
Minute adjustment
CLK ADJ*1
Clock adjustment
• AUTO
• OFF
:
:
The built-in clock is automatically adjusted using the clock data
provided via the satellite radio channel.
Cancels.
T-ZONE*1, *2
Time zone
EASTERN,
ATLANTIC,
Select your residential area from one of the following time zones for
clock adjustment.
NEWFOUND,
ALASKA, PACIFIC,
MOUNTAIN,
CENTRAL
DST*1, *2
Daylight savings time
• ON
:
:
Activates daylight savings time if your residential area is subject
to DST.
Cancels.
• OFF
—
SID*3
SIRIUS ID
The 12-digit SIRIUS identification number scrolls on the display
5 seconds after “SID” is selected, [15].
• Press SEL to resume the previous display.
DIMMER
Dimmer
• ON
• OFF
:
:
Dims the display illumination.
Cancels.
SCROLL*4
Scroll
• ONCE
• AUTO
• OFF
:
:
:
Scrolls the disc information once.
Repeats scrolling (at 5-second intervals).
Cancels.
• Pressing DISP for more than one second can scroll the display
regardless of the setting.
1
*
*
*
*
Displayed only when SIRIUS Satellite radio or XM Satellite radio is connected.
Displayed only when “CLK ADJ” is set to “AUTO.”
Displayed only when SIRIUS Satellite radio is connected.
2
3
4
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
Continued on the next page
13
Indication
Item
Settings, [reference page]
(
: Initial)
WOOFER*5
Subwoofer cutoff
frequency
• LOW
• MID
• HIGH
:
:
:
Frequencies lower than 90 Hz are sent to the subwoofer.
Frequencies lower than 135 Hz are sent to the subwoofer.
Frequencies lower than 180 Hz are sent to the subwoofer.
EXT IN*6
External input
• CHANGER
:
To use a JVC CD changer, [9], a JVC compatible satellite (SIRIUS/
XM) tuner, [15], an Apple iPod or a JVC D. player, [18].
To use any other external component than the above, [20].
• EXT IN
• REAR
:
:
L/O MODE
Line output mode
Select if the both LINE OUT terminals are used for connecting the
speakers (through an external amplifier).
• WOOFER
:
Select if the REAR LINE OUT terminals are used for connecting a
subwoofer (through an external amplifier).
TAG DISP
Tag display
• TAG ON
• TAG OFF
:
:
Shows the Tag information while playing MP3/WMA tracks, [10].
Cancels.
AMP GAIN
Amplifier gain control
• LOW PWR
:
VOL 00 – VOL 30 (Select this if the maximum power of the
speaker is less than 50 W to prevent them from being damaged.)
VOL 00 – VOL 50
• HIGH PWR
• AREA US
:
:
AREA
Tuner channel interval
When using in North/Central/South America. AM/FM intervals are
set to 10 kHz/200 kHz.
• AREA SA
• AREA EU
:
:
When using in South American countries where FM interval is
100 kHz. AM interval is set to 10 kHz.
When using in any other areas. AM/FM intervals are set to
9 kHz/50 kHz (100 kHz during auto search).
5
*
*
Displayed only when “L/O MODE” is set to “WOOFER.”
Displayed only when one of the following sources is selected—FM, AM, or DISC.
6
14
Activate your SIRIUS subscription after
connection:
1
Satellite radio operations
This unit is satellite (SAT) Radio Ready—compatible
with both SIRIUS Satellite radio and XM Satellite radio.
2
Before operating your satellite radio:
• For connection, see Installation/Connection Manual
(separate volume).
JVC DLP starts updating all the SIRIUS channels.
• Refer also to the Instructions supplied with your
SIRIUS Satellite radio or XM Satellite radio.
Once completed, JVC DLP tunes in to the preset
channel, CH184.
• “SIRIUS” and the SIRIUS dog logo are registered
trademarks of SIRIUS Satellite Radio Inc.
• XM and its corresponding logos are registered
trademarks of XM Satellite Radio Inc.
• “SAT Radio,” the SAT Radio logo and all related marks
are trademarks of SIRIUS Satellite Radio Inc., and XM
Satellite Radio, Inc.
3
4
Check your SIRIUS ID, see page 13.
Contact SIRIUS on the internet at <http://
activate.siriusradio.com/> to activate your
subscription, or you can call SIRIUS toll-free
at 1-888-539-SIRIUS (7474).
“SUB UPDT PRESS ANY KEY” scrolls on the display
once subscription has been completed.
Listening to the satellite radio
Activate your XM subscription after
connection:
• Only Channel 0, 1, and 247 are available before
activation.
Connect either one of the following (separately
purchased) to the CD changer jack on the rear of this
unit.
• JVC SIRIUS radio DLP—Down Link Processor, for
listening to the SIRIUS Satellite radio.
• XMDirectTM Universal Tuner Box using a JVC
Smart Digital Adapter—XMDJVC100 (not
supplied), for listening to the XM Satellite radio.
1
2
GCI (Global Control Information) update:
• If channels are updated after subscription, updating
starts automatically.
“UPDATING” flashes and no sound can be heard.
• Update takes a few minutes to complete.
• During update, you cannot operate your satellite
radio.
XMDirectTM Universal Tuner Box starts updating
all the XM channels. “Channel 1” is tuned in
automatically.
3
4
Check your XM Satellite radio ID labelled on
the casing of the XMDirectTM Universal Tuner
Box, or tune into “Channel 0” (see page 17).
Contact XM Satellite radio on the internet
activate your subscription, or you can call 1-
800-XM-RADIO (1-800-967-2346).
Once completed, the unit tunes in to one of the
available channels (Channel 4 or higher).
15
Searching for category/channel
Listening to the SIRIUS Satellite radio
You can search for programs by category (Category
Search) or channel number (Channel Search).
• In Category Search, you can tune in to the channels
of the selected category. Category Search begins from
the currently selected channel. The selected channel
number flashes on the display.
1
2
3
• In Channel Search, you can tune in to all channels
(including non-categorised channels).
Select a category.
1
Select a category (Category Search).
•
For Channel Search, skip this step.
You can tune in to all the channels of every
category by selecting “ALL.”
Selecting a particular category (SPORTS,
ENTERTAINMENT, etc.) allows you to enjoy only the
channels from the selected category.
2
Select a channel for listening.
4
Select a channel for listening.
Current channel number
Holding the button changes the channels rapidly.
Ex.: When you select “COUNTRY” for Category Search
• When changing the category or channel, invalid and
unsubscribed channels are skipped.
If no operation is done for about 15 seconds,
Category Search is canceled.
In Channel Search, channel name and channel
number appear on the display during search.
Listening to the XM Satellite radio
1
• While searching, invalid and unsubscribed channels
are skipped.
2
3
Select a channel for listening.
Holding the button changes the channels rapidly.
16
Checking the XM Satellite radio ID
While selecting “XM1,” “XM2,” or “XM3,” select
“Channel 0.”
Listening to a preset channel
1
Select either SIRIUS Satellite radio or XM
Satellite radio.
2
3
The display alternately shows “RADIO ID” and the
8-digit (alphanumeric) ID number.
Select the preset channel (1 – 6) you want.
To cancel the ID number display, select any channel
other than “Channel 0.”
To change the display information while
listening to a channel
Storing channels in memory
You can preset six channels for each band.
Ex.: Storing a channel into preset number 4.
Clock = Category name = Channel name =
Artist name = Composer name* = Song/
program name/title = (back to the beginning)
1
2
Tune in to a channel you want.
* Only for SIRIUS Satellite radio.
Preset number flashes for a while.
17
iPod ®/D. player operations
This unit is ready for operating an Apple iPod or a JVC
D. player from the control panel.
⁄ Adjust the sound as you want. (See
pages 11 and 12.)
• Make sure the equalizer on the iPod or D.
player is deactivated.
Before operating your iPod or D. player:
Connect either one of the following (separately
purchased) to the CD changer jack on the rear of this
unit.
To pause*1 or stop*2
playback
To resume playback, press it
again.
• Interface adapter for iPod —KS-PD100 for
®
controlling an iPod.
To fast-forward or reverse
the track
• D. player interface adapter—KS-PD500 for
controlling a D. player.
• For connection, see Installation/Connection Manual
(separate volume).
• For details, refer also to the manual supplied with the
interface adapter.
To go to the next or
previous tracks
1
*
*
For iPod
2
For D. player
Caution:
Make sure to turn off this unit or turn off the
vehicle’s ignition switch before connecting or
disconnecting the iPod or D. player.
Selecting a track from the menu
1
2
Enter the main menu.
Preparations:
Make sure “CHANGER” is selected for the external input
setting, see page 14.
Now the 5/∞/4 /¢ buttons work as
the menu selecting buttons*3.
~
Ÿ
Select the desired menu.
Playback starts automatically from where it has
been paused*1 or stopped*2 previously.
For iPod:
PLAYLIST Ô ARTISTS Ô ALBUMS Ô SONGS
Ô GENRES Ô COMPOSER Ô (back to the
beginning)
! Adjust the volume.
For D. player:
PLAYLIST Ô ARTIST Ô ALBUM Ô GENRE
Ô TRACK Ô (back to the beginning)
18
3
Confirm the selection.
To move back to the previous
7
Random play
menu, press 5.
ALBM RND*4
Functions the same as “Shuffle Albums” of the
iPod.
• If a track is selected, playback starts
automatically.
SONG RND/RND ON
Functions the same as “Shuffle Songs” of the iPod
or “Random Play = On” of the D. player.
• If the selected item has another layer, you will
enter the layer. Repeat steps 2 and 3 until the
desired track is played.
• Holding 4 /¢ can skip 10 items at
a time.
RND OFF
Cancels.
3
4
*
The menu selecting mode will be canceled:
*
For iPod: Only if you select “ALL” in “ALBUMS” of the
main “MENU.”
–
If no operations are done for about 5 seconds.
–
When you confirm the selection of a track.
To check other information while listening
to an iPod or a D. player
Selecting the playback modes
1
2
Select your desired playback mode.
7
Repeat play
ONE RPT
Functions the same as “Repeat One” of the iPod or
“Repeat Mode = One” for the D. player.
ALL RPT
Functions the same as “Repeat All” of the iPod or
“Repeat Mode = All” for the D. player.
RPT OFF
Cancels.
19
Other external component More about this unit
operations
Basic operations
Turning on the power
• By pressing SRC on the unit, you can also turn on the
power. If the source is ready, playback also starts.
You can connect an external component to the
CD changer jack on the rear using the Line Input
Adapter—KS-U57 (not supplied) or AUX Input
Adapter—KS-U58 (not supplied).
• For connection, see Installation/Connection Manual
(separate volume).
Turning off the power
• If you turn off the power while listening to a disc, disc
play will start from where playback has been stopped
previously, next time you turn on the power.
For listening to the satellite radio, iPod, or D. player,
refer to pages 15 – 19.
Tuner operations
Storing stations in memory
• During SSM search...
~
If “EXT IN” does not appear, see page 14 and
select the external input (“EXT IN”).
– All previously stored stations are erased and
stations are stored newly.
– Received stations are preset in No. 1 (lowest
frequency) to No. 6 (highest frequency).
– When SSM is over, the station stored in No. 1 will
be automatically tuned in.
Ÿ Turn on the connected component
and start playing the source.
• When storing a station manually, the previously
preset station is erased when a new station is stored
in the same preset number.
! Adjust the volume.
Disc operations
Caution for DualDisc playback
⁄ Adjust the sound as you want. (See
• The Non-DVD side of a “DualDisc” does not comply
with the “Compact Disc Digital Audio” standard.
Therefore, the use of Non-DVD side of a DualDisc on
this product may not be recommended.
pages 11 and 12.)
To check the other information while
listening to an external component
General
• This unit has been designed to reproduce CDs/CD
Texts, and CD-Rs (Recordable)/CD-RWs (Rewritable)
in audio CD (CD-DA), MP3 and WMA formats.
• When a disc had been loaded, selecting “DISC” for the
playback source starts disc play.
Clock Ô EXT IN
20
Inserting a disc
Playing an MP3/WMA disc
• When a disc is inserted upside down, the disc
automatically ejects.
• Do not insert 8 cm (3-3/16") discs (single CD) and
unusual shape discs (heart, flower, etc.) into the
loading slot.
• This unit can play back MP3/WMA files with the
extension code <.mp3> or <.wma> (regardless of
the letter case—upper/lower).
• This unit can show the names of albums, artists
(performer), and Tag (Version 1.0, 1.1, 2.2, 2.3, or
2.4) for MP3 files and for WMA files.
• This unit can display only one-byte characters. No
other characters can be correctly displayed.
• This unit can play back MP3/WMA files meeting the
conditions below:
Playing a disc
• While fast-forwarding or reversing on an MP3 or
WMA disc, you can only hear intermittent sounds.
– Bit rate: 8 kbps — 320 kbps
– Sampling frequency:
Playing a CD-R or CD-RW
• Use only “finalized” CD-Rs or CD-RWs.
• This unit can play back only files of the same type
which are first detected if a disc includes both audio
CD (CD-DA) files and MP3/WMA files.
• This unit can play back multi-session discs; however,
unclosed sessions will be skipped while playing.
• Some CD-Rs or CD-RWs may not play back on this
unit because of their disc characteristics, or for the
following reasons:
– Discs are dirty or scratched.
– Moisture condensation occurs on the lens inside
the unit.
– The pickup lens inside the unit is dirty.
– CD-R/CD-RW on which the files are written with
“Packet Write” method.
– There are improper recording conditions (missing
data, etc.) or media conditions (stained, scratched,
warped, etc.).
48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)
24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)
– Disc format: ISO 9660 Level 1/Level 2, Romeo,
Joliet, Windows long file name
• The maximum number of characters for file/folder
names vary among the disc format used (includes 4
extension characters—<.mp3> or <.wma>).
– ISO 9660 Level 1: up to 12 characters
– ISO 9660 Level 2: up to 31 characters
– Romeo: up to 128 characters
– Joliet: up to 64 characters
– Windows long file name: up to 128 characters
• This unit can play back files recorded in VBR (variable
bit rate).
Files recorded in VBR have a discrepancy in elapsed
time display, and do not show the actual elapsed
time. Especially, after performing the search function,
this difference becomes noticeable.
• CD-RWs may require a longer readout time since the
reflectance of CD-RWs is lower than that of regular
CDs.
• This unit can recognize a total of 512 files, of 200
folders, and of 8 hierarchies.
• Do not use the following CD-Rs or CD-RWs:
– Discs with stickers, labels, or a protective seal stuck
to the surface.
– Discs on which labels can be directly printed by an
ink jet printer.
Using these discs under high temperatures or high
humidities may cause malfunctions or damage to the
unit.
Continued on the next page
21
• This unit cannot play back the following files:
– MP3 files encoded with MP3i and MP3 PRO format.
– MP3 files encoded in an inappropriate format.
– MP3 files encoded with Layer 1/2.
– WMA files encoded with lossless, professional, and
voice format.
• To know more about SIRIUS Satellite radio or to sign
• For the latest channel listings and programming
information, or to sign up for XM Satellite radio, visit
– WMA files which are not based upon Windows
iPod or D. player operations
• When you turn on this unit, the iPod or D. player is
charged through this unit.
• While the iPod or D. player is connected, all
operations from the iPod or D. player are disabled.
Perform all operations from this unit.
• The text information may not be displayed correctly.
– Some characters such as accented letters cannot be
shown correctly on the display.
Media Audio.
®
– WMA files copy-protected with DRM.
– Files which have the data such as WAVE, ATRAC3,
etc.
• The search function works but search speed is not
constant.
Changing the source
• If you change the source, playback also stops
(without ejecting the disc).
Next time you select “DISC” for the playback source,
disc play starts from where it has been stopped
previously.
– Depends on the condition of communication
between the iPod or D. player and the unit.
• If the text information includes more than 8
characters, it scrolls on the display (see also page 13).
This unit can display up to 40 characters.
Ejecting a disc
Notice:
• If the ejected disc is not removed within 15 seconds,
the disc is automatically inserted again into the
loading slot to protect it from dust. (Disc will not play
this time.)
When connecting an iPod or a D. player, some
operations may not be performed correctly or as
intended. In this case, visit the following JVC web
site:
For iPod users: <http://www.jvc.co.jp/english/car/
support/ks-pd100/index.html>
For D. player users: <http://www.jvc.co.jp/
english/car/support/ks-pd500/index.html>
General settings—PSM
• If you change the “AMP GAIN” setting from “HIGH
PWR” to “LOW PWR” while the volume level is set
higher than “VOL 30,” the unit automatically changes
the volume level to “VOL 30.”
Satellite radio operations
• Microsoft and Windows Media are either registered
trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries.
• iPod is a trademark of Apple Computer, Inc.,
registered in the U.S. and other countries.
• You can also connect the JVC SIRIUS radio PnP
(Plug and Play), using the JVC SIRIUS radio adapter,
KS-U100K (not supplied) to the CD changer jack on
the rear.
By turning on/off the power of the unit, you can turn
on/off the JVC PnP. However, you cannot control it
from this unit.
22
To keep discs clean
Maintenance
A dirty disc may not play correctly.
If a disc does become dirty, wipe it with
a soft cloth in a straight line from center
to edge.
• Do not use any solvent (for example, conventional
record cleaner, spray, thinner, benzine, etc.) to clean
discs.
How to clean the connectors
Frequent detachment will deteriorate the connectors.
To minimize this possibility, periodically wipe the
connectors with a cotton swab or cloth moistened with
alcohol, being careful not to damage the connectors.
To play new discs
New discs may have some rough spots
around the inner and outer edges. If
such a disc is used, this unit may reject
the disc.
Connector
To remove these rough spots, rub the edges with a
pencil or ball-point pen, etc.
Moisture condensation
Moisture may condense on the lens inside the unit in
the following cases:
Do not use the following discs:
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the unit may malfunction. In this
case, eject the disc and leave the unit turned on for a
few hours until the moisture evaporates.
Warped disc
Sticker
Sticker residue
How to handle discs
Center holder
When removing a disc from its
case, press down the center holder
of the case and lift the disc out,
holding it by the edges.
Stick-on label
• Always hold the disc by the edges. Do not touch its
recording surface.
When storing a disc into its case, gently insert the
disc around the center holder (with the printed surface
facing up).
• Make sure to store discs into the cases after use.
23
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service center.
Symptoms
Remedies/Causes
• Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
• Check the cords and connections.
• The unit does not work at all.
Reset the unit (see page 3).
• SSM automatic presetting does not work. Store stations manually.
• Static noise while listening to the radio.
• Disc cannot be played back.
Connect the antenna firmly.
Insert the disc correctly.
• CD-R/CD-RW cannot be played back.
• Tracks on the CD-R/CD-RW cannot be
skipped.
• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW with the component which
you used for recording.
• Disc can be neither played back nor
ejected.
• Unlock the disc (see page 10).
• Eject the disc forcibly (see page 3).
• Disc sound is sometimes interrupted.
• Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
• “NO DISC” appears on the display.
• Disc cannot be played back.
Insert a playable disc into the loading slot.
• Use a disc with MP3/WMA tracks recorded in the format
compliant with ISO 9660 Level 1, Level 2, Romeo, or
Joliet.
• Add the extension code <.mp3> or <.wma> to the file
names.
• Noise is generated.
Skip to another track or change the disc. (Do not add the
extension code <.mp3> or <.wma> to non-MP3 or WMA
tracks.)
• A longer readout time is required (“CHECK” Do not use too many hierarchies and folders.
keeps flashing on the display).
24
Symptoms
Remedies/Causes
• Tracks do not play back in the order you
have intended them to play.
Playback order is determined when the files are recorded.
• Elapsed playing time is not correct.
This sometimes occurs during play. This is caused by how
the tracks are recorded on the disc.
• “NO FILES” appears on the display.
Insert a disc that contains MP3/WMA tracks.
• Correct characters are not displayed (e.g.
album name).
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
• “NO DISC” appears on the display.
• “NO MAG” appears on the display.
• “RESET 8” appears on the display.
Insert a disc into the magazine.
Insert the magazine.
Connect this unit and the CD changer correctly and press
the reset button of the CD changer.
• “RESET 1” – “RESET 7” appears on the
display.
Press the reset button of the CD changer.
• The CD changer does not work at all.
Reset the unit (see page 3).
• “CALL 1-888-539-SIRIUS TO SUBSCRIBE”
scrolls on the display while listening to the
SIRIUS Satellite radio.
Starts subscribing SIRIUS Satellite radio (see page 15).
• No sound can be heard. “UPDATING”
appears on the display.
The unit is updating the channel information and it takes
a few minutes to complete.
• Either “NO SIGNAL” scrolls or “NO SIGNL”
appears on the display.
Move to an area where signals are stronger.
• Either “NO ANTENNA” scrolls or “ANTENNA” Connect the antenna firmly.
appears on the display.
• “NO CH” appears on the display for about
5 seconds, then returns to the previous
display while listening to the SIRIUS
Satellite radio.
No broadcast on the selected channel.
Select another channel or continue listening to the
previous channel.
• “NO (information)*” scrolls on the display No text information for the selected channel.
while listening to the SIRIUS Satellite radio.
• “---” appears on the display while listening
to the XM Satellite radio.
* NO CATEGORY, NO ARTIST, NO COMPOSER, and NO SONG/PROGRAM
Continued on the next page
25
Symptoms
Remedies/Causes
• “---” appears on the display for about
2 seconds, then returns to the previous
Selected channel is no longer available or is unauthorized.
Select another channel or continue listening to the
channel while listening to the XM Satellite previous channel.
radio.
• “OFF AIR” appears on the display while
listening to the XM Satellite radio.
Selected channel is not broadcasting at this time.
Select another channel or continue listening to the
previous channel.
• “LOADING” appears on the display while
listening to the XM Satellite radio.
The unit is loading the channel information and audio.
Text information are temporarily unavailable.
• “RESET 8” appears on the display.
• Satellite radio does not work at all.
Reconnect this unit and the satellite radio correctly, then
reset the unit.
• The iPod or D. player does not turn on or
does not work.
• Check the connecting cable and its connection.
• Update the firmware version.
•
Change the battery.
• Buttons do not work as intended.
• The sound is distorted.
The functions of the buttons have been changed. Press
MODE before performing the operation.
Deactivate the equalizer either on the unit or the iPod/
D. player.
• “NO IPOD” or “NO DP” appears on the
display.
Check the connecting cable and its connection.
• Playback stops.
The headphones are disconnected during playback.
Restart the playback operation using the control panel
(see page 18).
• No sound can be heard when connecting
an iPod nano.
Disconnect the headphones from the iPod nano.
• No sound can be heard.
• “ERROR 01” appears on the display when
connecting a D. player.
Disconnect the adapter from the D. player. Then, connect
it again.
• “NO FILES” or “NO TRACK” appears on the
display.
No tracks are stored. Import tracks to the iPod or D. player.
• “RESET 1” – “RESET 7” appears on the
display.
Disconnect the adapter from both the unit and iPod/
D. player. Then, connect it again.
• “RESET 8” appears on the display.
Check the connection between the adapter and this unit.
Reset the iPod or D. player.
• The iPod’s or D. player’s controls do not
work after disconnecting from this unit.
26
Specifications
AUDIO AMPLIFIER SECTION
CD PLAYER SECTION
Type: Compact disc player
Signal Detection System: Non-contact optical pickup
(semiconductor laser)
Number of Channels:
Frequency Response:
Dynamic Range:
Power Output:
18 W RMS × 4 Channels at
4 Ω and ≤ 1% THD+N
Signal to Noise Ratio:
2 channels (stereo)
5 Hz to 20 000 Hz
96 dB
80 dBA (reference: 1 W into 4 Ω)
Signal-to-Noise Ratio:
Wow and Flutter: Less than measurable limit
MP3 Decoding Format:
MPEG1/2 Audio Layer 3
Max. Bit Rate: 320 kbps
WMA (Windows Media Audio) Decoding Format:
98 dB
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)
Tone Control Range:
Bass:
10 dB at 100 Hz
Treble: 10 dB at 10 kHz
Frequency Response: 40 Hz to 20 000 Hz
Line-Out Level/Impedance:
2.5 V /20 kΩ load (full scale)
Output Impedance: 1 kΩ
Subwoofer-Out Level/Impedance:
2.0 V /20 kΩ load (full scale)
Other Terminal: CD changer
®
Max. Bit Rate: 192 kbps
GENERAL
Power Requirement:
Operating Voltage:
DC 14.4 V (11 V to 16 V allowance)
Grounding System: Negative ground
Allowable Operating Temperature:
0°C to +40°C (32°F to 104°F)
Dimensions (W × H × D):
TUNER SECTION
Frequency Range:
FM: 87.5 MHz to 107.9 MHz
(with channel interval set to 100 kHz or
200 kHz)
Installation Size (approx.):
182 mm × 52 mm × 150 mm
(7-3/16" × 2-1/16" × 5-15/16")
Panel Size (approx.):
87.5 MHz to 108.0 MHz
(with channel interval set to 50 kHz)
AM: 530 kHz to 1 710 kHz
(with channel interval set to 10 kHz)
531 kHz to 1 602 kHz
188 mm × 58 mm × 11 mm
(7-7/16" × 2-5/16" × 7/16")
Mass (approx.):
(with channel interval set to 9 kHz)
1.4 kg (3.1 lbs) (excluding accessories)
[FM Tuner]
Usable Sensitivity: 11.3 dBf (1.0 μV/75 Ω)
50 dB Quieting Sensitivity:
Design and specifications are subject to change without notice.
16.3 dBf (1.8 μV/75 Ω)
If a kit is necessary for your car, consult your
telephone directory for the nearest car audio
speciality shop.
Alternate Channel Selectivity (400 kHz): 65 dB
Frequency Response: 40 Hz to 15 000 Hz
Stereo Separation: 35 dB
[AM Tuner]
Sensitivity: 20 μV
Selectivity: 35 dB
27
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Still having trouble??
USA ONLY
Call 1-800-252-5722
We can help you!
EN, SP
© 2006 Victor Company of Japan, Limited
0706DTSMDTJEIN
KD-S33
Installation/Connection Manual
Manual de instalación/conexión
0706DTSMDTJEIN
EN, SP
GET0401-002A
[J]
© 2006 Victor Company of Japan, Limited
ESPAÑOL
ENGLISH
PREPARATIONS
You need the installation kits which corresponds to your car.
TROUBLESHOOTING
• The fuse blows.
* Are the red and black leads connected correctly?
• Mark all the check boxes (
) to make sure you have follow the instructions and the listed parts.
• Power cannot be turned on.
Check the battery system in your car
* Is the yellow lead connected?
• No sound from the speakers.
* Is the speaker output lead short-circuited?
• Sound is distorted.
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers grounded in common?
12 V DC, NEGATIVE ground
• Noise interfere with sounds.
* Is the rear ground terminal connected to the car’s chassis using shorter and thicker cords?
Prepare this before installation
• This unit becomes hot.
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers grounded in common?
• This unit does not work at all.
* Have you reset your unit?
Parts list for installation and connection
E
A / B
C
D
Power cord
Hard case/Control panel
Sleeve
Trim plate
F
G
H
I
J
K
L
Washer (ø5)
Lock nut (M5)
Mounting bolt—
Rubber cushion
Handles
Remote controller
Battery
M5 × 20 mm (M5 × 13/16")
INSTALLATION
If you are not sure how to install this unit correctly, consult your JVC car audio dealer.
In dash-mounting
Removing the unit
Before removing the unit, release the rear section.
When you stand the unit, be careful
not to damage the fuse on the rear.
Do the required electrical
connections.
Bend the appropriate tabs
to hold the sleeve firmly
in place.
When using the optional stay
When installing the unit without using the sleeve
In a Toyota car for example, first remove the car radio and install the unit in its place.
Stay (option)
Fire wall
Flat type screws
* Not supplied for this unit.
—M5 × 8 mm (M5 × 3/8")*
Dashboard
Bracket*
Screw (option)
Flat type screws
—M5 × 8 mm (M5 × 3/8")*
Install the unit at an angle of
less than 30˚.
Pocket
Bracket*
1
ELECTRICAL CONNECTIONS
Make sure to disconnect the battery’s negative terminal.
• Be sure to ground this unit to the car’s chassis again after installation.
High
Note:
It is recommended to connect to the speakers with maximum power of more than 50 W (both at the rear and at the front, with an impedance of 4 Ω to 8 Ω).
If the maximum power is less than 50 W, change “AMP GAIN” setting to prevent the speakers from being damaged (see page 14 of the INSTRUCTIONS).
Heat sink
Typical connections
Connecting the external amplifiers and/or subwoofer
Rear ground terminal Line out
Remote lead
Y-connector *1
Remote lead (blue with white stripe)
Antenna
terminal
15 A fuse
To the remote lead of other equipment
or automatic antenna if any
To external
component
Ignition switch
Black
To metallic body or
chassis of the car
JVC Amplifier
Connect only the front speakers if your
speaker system is two-speaker system.
Rear speakers
To a live terminal in the
fuse block connecting to the
car battery (bypassing the
ignition switch) (constant
12 V)
White with black stripe
Front speakers
Yellow *2
Set “L/O MODE” to “REAR”
(See page 14 of the INSTRUCTIONS.)
Front speaker (left)
White
Fuse block
Gray with black stripe
Red
To an accessory terminal in
the fuse block
JVC Amplifier
JVC Amplifier
Front speaker (right) Gray
Green with black stripe
Front
speakers
Front speakers
Blue with white
stripe
To the remote lead of other
equipment or automatic antenna if
any (200 mA max.)
or
Rear speaker (left)
Green
Set “L/O MODE” to “WOOFER”
(See page 14 of the INSTRUCTIONS.)
Purple with black stripe
Rear speaker (right)
Purple
JVC Amplifier
1
2
*
*
Not supplied for this unit.
Before checking the operation of this unit prior to
installation, this lead must be connected, otherwise power
cannot be turned on.
Firmly attach the ground wire to the metallic body or to the
chassis of the car—to the place uncoated with paint (if
coated with paint, remove the paint before attaching the
wire). Failure to do so may cause damage to the unit.
Signal cord (not supplied for this unit).
Subwoofer
PRECAUTIONS on power supply and speaker connections
3
4
*
*
Connecting the external components
(A) JVC CD changer, SIRIUS Satellite radio, XM Satellite radio, Apple iPod®, or JVC D. player
Set “CHANGER” for the external input setting (See page14 of the INSTRUCTIONS.)
• For listening to the SIRIUS Satellite radio, connect a JVC DLP—Down Link Processor (separately purchased) to this unit.
• The iPod*5 or D. player (separately purchased) can be connected using an interface adapter (not supplied)—KS-PD100
(for iPod) or KS-PD500 (for D. player).
CAUTION:
Before connecting the external components, make sure that the unit is turned off.
Connection 1 (integrated connection)
Connection 2 (alternative connection)
CD changer jack
JVC DLP
JVC DLP
Apple iPod
or
or
JVC CD changer
• For listening to the XM Satellite radio, you can also connect XMDirectTM Universal
Tuner Box (separately purchased) through this unit using JVC Smart Digital Adapter—
XMDJVC100 (not supplied).
JVC D. player
or
or
Apple iPod
or
or
JVC CD changer
TM
XMDirect Universal Tuner Box
XMDJVC100
JVC D. player
Antenna (supplied
with XMDirect
Universal Tuner Box)
TM
To CD changer, KS-PD100, or KS-PD500 if using Connection 1 (intergrated
connection)
5
6
*
*
iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
Signal cord supplied with your JVC CD changer or DLP.
(B) JVC PnP (Plug and Play)
(C) Other external component
Set “EXT IN” for the external input setting (See page14 of the INSTRUCTIONS.)
You can also connect an external component through this unit using Line Input Adapter, KS-U57 (not supplied) or AUX Input Adapter,
KS-U58 (not supplied).
You can also connect JVC PnP through this unit using JVC SIRIUS radio adapter, KS-U100K (not supplied).
• Turning on/off the unit can also turns on/off the JVC PnP.
Signal cord (not supplied for this unit)
External
component
To headphones jack
Stereo mini plug
CD changer jack
JVC PnP
External
component
CD changer jack
DC power plug
3.5 mm stereo mini plug
To DC IN jack
2
|