ThinkPad 4X/4X/20X
CD-ReWritable
Ultrabay 2000 Drive
User's Guide
OPTIONS
by IBM
Contents
Safety: Read first . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
Product registration
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi
About this book
Part 1: Installation and user’s guide . . . . . . . . . . . . . . . . 1-1
Part 2: Appendixes . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Appendix A. Product specifications . . . . . . . . . . . . . . . . . . . . . 2-1
Appendix B. Help and service information . . . . . . . . . . . . . . . . . 2-1
Online technical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Telephone technical support . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Appendix C. Product warranties and notices . . . . . . . . . . . . . . . . 2-2
Warranty Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Notices
Trademarks
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
Electronic emission notices
. . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
Copyright IBM Corp. 2000
iii
Safety: Read first
Before installing this product, read the Safety Information.
Antes de instalar este produto, leia as Informações de
Segurança.
Před instalací tohoto produktu si přečtěte příručku bezpečnostních instrukcí.
Læs sikkerhedsforskrifterne, før du installerer dette produkt.
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta
Safety Information.
Avant d'installer ce produit, lisez les consignes de sécurité.
Vor der Installation dieses Produkts die Sicherheitshinweise
lesen.
Prima di installare questo prodotto, leggere le Informazioni
sulla Sicurezza
Lees voordat u dit product installeert eerst de
veiligheidsvoorschriften.
Les sikkerhetsinformasjonen (Safety Information) før du
installerer dette produktet.
iv IBM ThinkPad 4X/4X/20X CD-RW Ultrabay 2000 Drive
Antes de instalar este produto, leia as Informações sobre
Segurança.
Pred inštaláciou tohto zariadenia si pečítaje Bezpečnostné predpisy.
Antes de instalar este producto lea la información de
seguridad.
Läs säkerhetsinformationen innan du installerar den här
produkten.
v
Product registration
Thank you for purchasing OPTIONS by IBM . Please take a few moments to register
your product and provide us with information that will help IBM to better serve you in
the future. Your feedback is valuable to us in developing products and services that
are important to you, as well as in developing better ways to communicate with you.
Register your option on the IBM Web site at:
IBM will send you information and updates on your registered product unless you
indicate on the Web site questionnaire that you do not want to receive further
information.
About this book
This manual contains information on the IBM ThinkPad 4X/4X/20X CD-RW Ultrabay
2000 Drive. It is divided into the following parts:
Part 1:
Installation and user’s guide
This section contains product and software descriptions, installation
requirements, installation instructions, handling and operating information,
and problem solving in the following languages:
English
German
French
Spanish
Italian
Brazilian Portuguese
Japanese
Part 2:
Appendixes
This section contains the product specifications, help and service
information, the product warranties and notices.
Note: The illustrations in this manual might be slightly different from your hardware.
vi IBM ThinkPad 4X/4X/20X CD-RW Ultrabay 2000 Drive
Part 1: Installation and user’s guide
This guide contains information on installing and using the drive. For problem-solving
information, go to “Problem solving” on page 1-10.
Product description
The IBM ThinkPad 4X/4X/20X CD-RW Ultrabay 2000 Drive can write to and
read from CD-ReWritable (CD-RW) and CD-Recordable (CD-R) discs, and can read
mass-produced, stamped CDs. The drive is compatible with Multi-Read (MR)
CD-ROM and DVD-ROM drives that can read CD-RW discs and other media types,
and with older non-MR CD-ROM drives that can read only CD-R and CD-ROM discs.
The drive writes to CD-RW and CD-R discs at different speeds. The drive can write
to a CD-RW or CD-R disc at up to four times the standard CD-ROM speed, recording
data at up to 1200 KB1 per second. At this rate, the drive can record approximately
650 MB2 of information on a CD-RW or CD-R disc in about 18 minutes. The drive
can also read data at up to 20 times the standard CD-ROM speed, or 6000 KB per
second.
Note: To use the drive’s CD-recording function, you must install the Easy CD
Creator/DirectCD software (included) for Microsoft Windows 2000
Professional, Windows 98, Windows 95, or Microsoft Windows NT 4.0
Workstation. For more information on the Easy CD Creator/DirectCD
software, see “Software description” on page 1-2.
In addition to this book, the option kit includes:
CD-ReWritable drive
Carrying case
Blank CD-RW disc
Blank CD-R disc
Easy CD Creator/DirectCD software CD
Laser Safety Guide for CD-ROMs
Note: Your option kit might also contain an update diskette for Adaptec software.
Contact your place of purchase if an item is missing or damaged. Be sure to retain
your proof of purchase. It might be required to receive warranty service. See
Appendix B, “Help and service information” on page 2-1 for technical support
information.
1
KB equals approximately 1024 bytes when referring to data transfer speeds.
2
MB equals approximately 1000000 bytes when referring to storage capacity.
Copyright IBM Corp. 2000
1-1
Software description
The Easy CD Creator/DirectCD software CD contains programs that work with
Windows 2000, Windows 98, Windows 95, and Windows NT 4.0. You can use the
programs with your CD-ReWritable drive to create audio and data CDs, to copy CDs,
and to make jewel-case inserts or CD labels. This manual provides basic instructions
on using the software to create CDs. For more information on using the software, go
to the online user’s guide on the software CD.
Installation requirements
To install the CD-ReWritable drive, your computer must meet the following minimum
requirements:
ThinkPad A or T series computer with Ultrabay 2000 drive bay
32 MB of Memory
3.5-inch diskette drive
Windows 2000, Windows 98, Windows 95, or Windows NT 4.0 operating system
Locating the drive controls
The following diagram shows the location of the controls on the front of the drive.
1 Power light
This light is visible when drive is in use.
2 Eject button
Press this button to eject the CD when the drive is in use.
3 Manual eject hole
Use this emergency release to eject the CD when the Eject button does not work.
For more information on manually ejecting a CD, go to “Manually ejecting a CD”
on page 1-5.
1-2 IBM ThinkPad 4X/4X/20X CD-RW Ultrabay 2000 Drive
Installing the drive
The ThinkPad 4X/4X/20X CD-RW Ultrabay 2000 Drive works with any ThinkPad
computer that has an Ultrabay 2000 drive bay.
Your ThinkPad computer includes an online user’s guide that provides drive
installation instructions specific to your computer. To correctly install the CD-RW
Drive into the Ultrabay 2000 drive bay in your ThinkPad computer, be sure to use the
instructions given in the online user’s guide.
Using the drive
This section provides information on how to handle and care for CDs and your
CD-RW drive, how to load CDs into your CD-RW drive, and how to get started using
the Easy CD Creator and DirectCD software applications.
Before you begin
Review the following guidelines before using the drive:
Movement of your ThinkPad while formatting or writing a disc may cause data
errors. Also, minimize typing while formatting or writing to a disc, as this may
also cause data errors.
For best results:
–
–
Keep the ThinkPad on a flat surface when writing to a disc.
Use the CD-RW drive when the ThinkPad is plugged into an ac outlet. If
the battery runs out while writing to a disc, the disc may be damaged.
–
Turn screensavers off. Using a screensaver may interrupt the formatting and
writing process.
The read and write results of the CD-RW drive depend upon the quality and
characteristics of the CD-R and CD-RW media used. Poor results may be
obtained with some CD-R and CD-RW suppliers.
Handling and caring for a CD
Carefully handle and clean CDs, especially writable media types such as CD-R and
CD-RW discs, so that they remain readable. You can prolong the life of your CDs by
using the following precautions.
Attention: Wiping a CD using a circular motion can cause loss of data.
Part 1: Installation and user’s guide 1-3
Handle the CD by the edges or the center hole. Do not touch the surface of the
CD.
To remove dust or fingerprints, wipe the CD from the center to the edge with a
soft, lint-free cloth.
Do not write on the surface.
Do not place the CD in direct sunlight.
Do not use commercial cleaners to clean the CD.
Do not bend the CD.
Caring for the CD-RW drive
To protect your CD-ReWritable drive during operation, observe the following
precautions:
Remove any CD from the drive before moving the drive.
Do not insert foreign objects into the drive.
Do not stack objects on the drive.
Do not remove the drive cover or attempt to service the drive.
Do not operate the drive under any of the following conditions:
–
–
–
High temperature, high humidity, or direct sunlight
Excessive vibration, sudden shock, or inclined surface
Excessive dust
1-4 IBM ThinkPad 4X/4X/20X CD-RW Ultrabay 2000 Drive
Loading a CD
1. Press the Eject button. The tray slides out of the drive.
2. Place the CD in the tray with the label facing up.
3. Close the tray by gently pushing the tray in until it latches.
Attention: Do not use force or insert foreign objects to open the CD tray. If
your tray does not open when you press the Eject button, see “Manually ejecting a
CD” for more information.
Manually ejecting a CD
If you press the Eject button and the tray does not slide out, turn off the computer and
straighten a large paper clip to form a tool, as shown in the illustration. The
straightened end must extend at least 45 mm (1.8 in.). Insert the extended end into the
manual-eject hole on the front of the drive. Push the paper clip until the tray opens.
Gently pull out the tray until you can remove the CD.
45 mm
1.8 in
Part 1: Installation and user’s guide 1-5
Installing the Easy CD Creator/DirectCD
software
Note: Be sure to see the README file on the software CD for the latest
information about the Easy CD Creator/DirectCD software.
The Easy CD Creator/DirectCD software CD contains the following programs:
Easy CD Creator
DirectCD
To take full advantage of the capabilities of your CD-ReWritable drive, you must
install both the Easy CD Creator and DirectCD programs. If you also have an MR
CD-ROM or DVD-ROM drive in your computer, you might need to install the UDF
Reader program to read certain CD-R or CD-RW discs in these drives.
To install the Easy CD Creator/DirectCD software for Windows 2000, Windows 98,
Windows 95 or Windows NT 4.0:
1. Insert the Easy CD Creator/DirectCD software CD into your CD-ReWritable
drive.
2. If the Adaptec Easy CD Creator Installation window opens, follow the on-screen
instructions and then go to step 6. If the window does not open, continue to the
next step.
3. Click Start Settings Control Panel.
4. Double-click Add/Remove Programs.
5. Follow the on-screen instructions to complete the installation. Repeat as
necessary to install each of the Easy CD Creator, DirectCD, and UDF Reader
components.
6. If your option package includes an update diskette for the Adaptec software,
insert it into the diskette drive when prompted.
7. Restart your operating system.
Using CD-R and CD-RW discs
The CD-ReWritable drive can write to both CD-R and CD-RW discs. CD-R discs
cannot be erased, but can be used with standard CD-ROM drives and CD players.
You can use CD-R discs to record audio tracks, store data, archive files, and copy files
from another CD.
CD-RW discs can be erased and rewritten, but can be used only with newer MR- and
CD-RW-compatible CD-ROM and DVD-ROM drives. You can use CD-RW discs to
back up, store, and update files or to copy files from another CD.
Note: CD-R discs are playable on audio CD players. CD-RW discs are not playable
on most audio CD players.
1-6 IBM ThinkPad 4X/4X/20X CD-RW Ultrabay 2000 Drive
Using the Easy CD Creator/DirectCD
programs
To use the Easy CD Creator/DirectCD software, insert a blank or partially-recorded
CD-R or CD-RW disc (this option kit includes a blank CD-R disc and a blank CD-RW
disc) into your CD-RW drive.
To open DirectCD:
1. Click Start Programs Adaptec DirectCD.
2. Click DirectCD Wizard.
Formatting CDs
You must format a blank CD-RW disc before you can copy files to it.
To format a CD3 with the DirectCD program:
1. Insert a blank disc (included) in the drive. The DirectCD Wizard Welcome
window opens.
If the DirectCD Wizard Welcome window does not open, click Start
Programs Adaptec DirectCD then click DirectCD Wizard.
2. Click Next twice. The Format Disc window opens.
Attention: Formatting completes in about 30 minutes. The DirectCD program
configures the disc to receive data, verifies the integrity of the disc surface, and
writes DirectCD file-system structures to the disc.
3. Click Next to continue. The Name Your Disc window opens.
4. In the Name Your Disc window, type the title of your disc. The disc name can
be up to 11 characters.
5. If you plan to use data compression with this disc, place a check in the Enable
compression on this disc check box.
6. Click Finish to start disc formatting. When the disc is finished formatting, the
Disc Ready window opens.
7. In the Disc Ready window, click OK.
You can now write information to the disc.
Note: If you have a problem formatting a CD-RW disc, go to “Problem solving” on
page 1-10.
3
Some CDs, such as multisession CDs, do not require formatting. For more information, see
the online user’s guide.
Part 1: Installation and user’s guide 1-7
If you want to read a DirectCD-formatted disc in another computer that has an MR
drive, you might have to install a UDF Reader program on the other computer.
Creating data CDs
Note: When using a DirectCD-formatted CD-RW discs, please use DirectCD to
create the data CDs.
To create data CDs:
1. Click Start Programs Adaptec Easy CD. Creator Create CD.
2. In the Easy CD Creator window, click Data.
3. Click Data CD.
Note: If you click DirectCD instead of Data CD, the Easy CD Creator program
closes and the DirectCD Wizard opens instead.
4. The window that opens is similar to the Windows Explorer window. In the top
section, click to select the files or directories that you want to add to the CD.
5. At the top of the window, click Add to add the files to your CD.
For information on advanced features such as making a multisession CD, or creating a
CD using the File menu instead of the Easy CD Creator Wizard, see the Adaptec
software online user’s guide.
Creating audio CDs
To create audio CDs:
1. Click Start Programs Adaptec Easy CD. Creator Create CD.
2. In the Easy CD Creator window, click Audio.
3. Click Audio CD.
4. The window that opens is similar to the Windows Explorer window. In the top
section, click to select the files or directories that you want to add to the CD.
5. At the top of the window, click Add to add the files to your CD.
For information on advanced features such as making a multisession CD, or creating a
CD using the File menu instead of the Easy CD Creator Wizard, see the Adaptec
software online user’s guide.
1-8 IBM ThinkPad 4X/4X/20X CD-RW Ultrabay 2000 Drive
Making a jewel-case insert
You can use Easy CD Creator to create a jewel-case insert or CD cover. When you
create a data or audio CD, the Easy CD Creator program creates a jewel-case insert
using the information in your CD layout, such as CD title, artist name, and song list.
To print a jewel-case insert or disc label:
1. Click Start Adaptec Easy CD Creator Create CD.
2. Click Jewel Case Creator.
3. In the left panel, click to select the front cover, inside front cover, back cover, or
CD label.
4. You can change your selections in the main editing window. To change the
background theme, click Format and then select Change Themes.
5. When you are finished making changes, click File and then select Print.
6. Click OK.
For more information on changing the information in the Jewel Case Layout window,
see the Adaptec software online user’s guide.
Backing up a CD
Attention: The CD Copier program copies files from one CD to another CD. To
copy a commercial CD, you must own the copyright or obtain permission from the
copyright owner. If you do not own the copyright or do not obtain permission
from the copyright owner, you might be violating copyright law and might be
subject to payment of damages or other remedies. For more information on
copyright law, consult your legal advisor.
To back up or copy a CD using your CD-ReWritable drive:
1. Click Start Programs Adaptec Easy CD Creator Features.
2. Click CD Copier.
The CD Copier window opens.
3. Click the Source and Destination tab if it is not the displayed window.
4. In the Copy From section, select the source drive from the pull-down menu.
Note: This is the drive containing the CD that you want to copy.
5. In the Record To section, select the CD-RW drive from the pull-down menu. Be
sure that there is a blank CD-R or CD-RW disc in the CD-ReWritable drive.
6. In the Advanced window, you can select the following options.
Note: If you select any of these options, the drive will copy the CD at a slower
rate.
Test the CD for the best possible recording speed.
Part 1: Installation and user’s guide 1-9
Change the number of copies made.
Copy the CD to your hard disk before copying it to the blank CD.
7. When you are finished choosing the settings, place the CD you are going to copy
into the source drive.
8. Click Copy to start copying your CD.
Problem solving
Computer problems can be caused by hardware, software, or user error. You might be
able to use the information in this section to solve problems yourself or to gather
helpful information you can pass on to a service technician. You might also need to
refer to your computer, operating-system, or sound-adapter publications.
Review the following list for any problem descriptions that might fit your situation.
You cannot create a multisession disc.
Be sure that there is enough space left on the disc for another session. Writing a
session requires lead-in and lead-out space (about 15 MB) in addition to the data
that is recorded.
You cannot successfully write to a CD-R or CD-RW disc.
Take the following actions:
1. Verify that the process is not being interrupted by a screen saver, an
antivirus program, an Internet or e-mail program, or other software. Disable
the functions that might interrupt the write operation.
2. Verify that the hard disk has been defragmented.
3. Consult the hard disk drive manufacturer or vendor if an older hard disk
drive is conducting a thermal recalibration during a write operation.
4. Replace the CD if it is bad or scratched.
5. Try disabling the Windows Auto Insert Notify function on your CD-ROM
and CD-RW drives.
You cannot eject a CD.
Take the following actions after ensuring that the drive is not in the process of
writing to a disc:
1. Eject the CD through software.
2. Use the Eject button.
3. Turn off the computer. Wait 45 seconds; then turn on the computer and try
using the Eject button again.
4. If other methods do not work, use the manual-eject hole, using instructions
given in “Manually ejecting a CD” on page 1-5.
1-10 IBM ThinkPad 4X/4X/20X CD-RW Ultrabay 2000 Drive
You cannot read from the CD after successfully writing to it.
Take the following actions:
1. If you can read the CD in another CD player or you can see previous
sessions, the directory information might be damaged on the volume, making
it unreadable. Check the documentation that comes with the Adaptec Easy
CD Creator/Direct CD software for troubleshooting ideas.
2. You might have a damaged CD-R or CD-RW disc. Try a new CD-R disc or
CD-RW disc, or another brand of CD.
3. If you can read from a CD-RW disc in the writing drive, but not in another
MR drive, be sure that a UDF Reader program is installed in the computer.
For more information on installing the UDF Reader program, go to
“Installing the Easy CD Creator/DirectCD software” on page 1-6.
4. Avoid writing at the slower 1X speed unless required by your computer.
Part 1: Installation and user’s guide 1-11
|