Get started.
All you need to know to get going.
2 Get Your Device Ready
Install the Battery
>
1. Slide the back cover upward to remove it.
a
2. Insert the battery with its exposed copper
part aligned with the copper connector
inside the battery compartment (a), and
then gently push the battery into place (b).
b
3. Replace the back cover.
4. To turn your device on or off, press and
hold the Power key.
Charge the Battery
>
•
Using the AC Phone Charger: Connect your device directly to an electrical
outlet using the phone charger.
•
Using the USB Sync cable: Plug the sync cable into the USB port on your
computer and into the sync connector on your device.
3 Activating Your Device
•
If you purchased your device at a Sprint Store, it is probably activated and
ready to use.
•
If you received your device in the mail, and it is a new Sprint account or a new
phone number, your device is designed to activate automatically when you
first turn it on. To confirm your activation, make a phone call.
•
If you received your device in the mail and you are switching numbers from a
previous Sprint phone to the new device, you need to contact Sprint to
activate the number on your new device. There are two ways to do this:
•
From your computer’s Web browser, go to sprint.com/activate and complete
the onscreen instructions to activate your device.
•
Contact Sprint Customer Service at 1-888-211-4727 for assistance
with activation.
When you have finished, make a phone call to confirm your activation.
4 Using the Phone
Make a Call
>
1. Tap Start > Phone.
2. Dial the phone number and then press
.
Answer a Call
>
>
>
Tap Answer or press
to answer an incoming call.
End a Call
Tap End Call or press
to hang up.
In-Call Options
Mute Call
Speaker
5 Basic Navigation on Your Device
The TouchFLO 3D Home Screen
>
The TouchFLO 3D Home screen is a
Today screen plug-in that gives you
up-to-date local information at a glance,
such as time, day, and weather
information, new messages and missed
calls, mail, music, Sprint TV, Internet, and
much more.
The Home screen has 11 tabs: Home,
People, Mail, Messages, Internet, Sprint
Music, Photos and Videos, Sprint TV,
Weather, Settings, and Programs. These
are conveniently arranged at the bottom
of the screen on a toolbar that allows you
to switch between these features.
TouchFLOTM 3D
>
TouchFLOTM 3D gives you a better touch
screen experience on your device. Using
TouchFLO, you can easily scroll and pan
the screen by sliding your finger on the
touch screen.
•
While on a Web page, document, or list (such
as a contacts list or file list):
•
•
•
Slide your finger upward to scroll down; slide
your finger downward to scroll up.
To scroll to the right, slide your finger to the left.
To scroll to the left, slide your finger to the right.
Touch and hold on the touch screen and then
drag your finger around the screen in any
direction.
6 Connecting to Your Computer
ActiveSync® (Windows XP)
>
The Getting Started CD that comes with your device contains Microsoft
ActiveSync 4.5 (or later). Follow the steps below to install and set up
ActiveSync on Windows XP or other compatible Windows systems.
1. Insert the CD into the disc drive on your computer.
2. Click Setup and Installation.
3. Select the ActiveSync check box, and then click Install.
4. Read the license terms, and then click Accept. When
installation is completed, click Done.
5. Connect your device to your
computer using the USB sync
cable that came with your device.
Follow the prompts to create a
synchronization partnership.
6. When you are finished,
ActiveSync will automatically
synchronize your computer and
your device.
Windows Mobile Device Manager (Windows Vista)
>
Microsoft Windows Mobile® Device Manager replaces Microsoft®
ActiveSync® on Windows Vista®. Follow the steps below to set up
synchronization on yourWindows Vista computer:
1. Connect your device to your computer using the USB sync cable that came
with your device. The Windows Mobile Device Manager will launch.
2. On the license agreement screen, click Accept.
3. On the Windows Mobile Device Manager’s Home screen, click Set up your device.
4. Select the information types that your want to synchronize, and then click Next.
5. Enter a device name and click Set Up. When you finish the setup wizard,
Windows Mobile Device Manager synchronizes your device automatically.
6. When you are finished, Windows Mobile Device Manager will automatically
synchronize your computer and your device.
7 Setting Up YourVoicemail
All unanswered calls to your device are automatically transferred to your
voicemail, even if your phone is in use or turned off. Therefore, you will want to
set up your voicemail and personal greeting as soon as your phone is activated.
1. Tap Start > Phone or press
.
2. On the Phone screen, tap and hold
3. Follow the system prompts to:
.
•
•
•
•
Create your passcode.
Record your greeting.
Record your name announcement.
Choose whether to activate One-Touch Message Access.
Note: If you are concerned about unauthorized access to your voicemail
account, Sprint recommends you enable your voicemail passcode.
8 Need Help?
On Your Computer
>
Getting Started CD: Full user guide in PDF format
On Your Device:
>
Tap Start > Touch Mobile Guide to access the full user guide,
– or –
Tap Start > Programs > Getting Started to find out how to set up basic
features such as date and time, device passwords, ring tones, and much more
In the Box
>
>
Basics Guide: Printed introduction to the basics
On the Web
9 Manage Your Account
>
Make a payment, see your bills, enroll in online billing.
Check minute usage and account balance.
See or modify the details of your Sprint service plan.
Get detailed instructions and download content.
•
•
•
•
From Your Sprint Phone
>
Press
Press
Press
to check minute usage and account balance.
•
•
•
to make a payment.
to access a summary of your Sprint
service plan or get answers to other questions.
From Any Other Phone
>
Sprint Customer Service: Dial 1-888-211-4727
Business Customer Service: Dial 1-800-927-2199
•
•
|