User Manual
www.htc.com
ꢁ
Opera® Mobile from Opera Software ASA. Copyright 1995-ꢀ008 Opera Software
ASA. All Rights Reserved.
YouTube is a trademark of Google, Inc.
Sprite Backup is a trademark or service mark of Sprite Software.
Copyright © ꢀ001-ꢀ008, Spb Software House. All Rights Reserved.
Copyright © ꢀ008, Esmertec AG. All Rights Reserved.
Copyright © ꢀ00ꢁ-ꢀ008, ArcSoft, Inc. and its licensors. All Rights Reserved. ArcSoft
and the ArcSoft logo are registered trademarks of ArcSoft, Inc. in the United States
and/or other countries.
Copyright © ꢀ004-ꢀ008, Ilium Software, Inc. All Rights Reserved.
All other company, product and service names mentioned herein are trademarks,
registered trademarks or service marks of their respective owners.
HTC shall not be liable for technical or editorial errors or omissions contained
herein, nor for incidental or consequential damages resulting from furnishing this
material. The information is provided “as is”without warranty of any kind and is
subject to change without notice. HTC also reserves the right to revise the content
of this document at any time without prior notice.
No part of this document may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying, recording or storing in a
retrieval system, or translated into any language in any form without prior written
permission of HTC.
4
Disclaimers
THE WEATHER INFORMATION, DATA AND DOCUMENTATION ARE PROVIDED “AS
IS”AND WITHOUT WARRANTY OR TECHNICAL SUPPORT OF ANY KIND FROM
HTC. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, HTC AND ITS
AFFILIATES expressly disclaim any and all representations and warranties, express
or implied, arising by law or otherwise, regarding the Weather Information, Data,
Documentation, or any other Products and services, including without limitation
any express or implied warranty of merchantability, express or implied warranty of
fitness for a particular purpose, non-infringement, quality, accuracy, completeness,
effectiveness, reliability, usefulness, that the Weather Information, Data and/or
Documentation will be error-free, or implied warranties arising from course of
dealing or course of performance.
Without limiting the foregoing, it is further understood that HTC and its Providers
are not responsible for Your use or misuse of the Weather Information, Data and/or
Documentation or the results from such use. HTC and its Providers make no express
or implied warranties, guarantees or affirmations that weather information will
occur or has occurred as the reports, forecasts, data, or information state, represent
or depict and it shall have no responsibility or liability whatsoever to any person or
entity, parties and non-parties alike, for any inconsistency, inaccuracy, or omission
for weather or events predicted or depicted, reported, occurring or occurred.
WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, YOU ACKNOWLEDGE
THAT THE WEATHER INFORMATION, DATA AND/OR DOCUMENTATION MAY INCLUDE
INACCURACIES AND YOU WILL USE COMMON SENSE AND FOLLOW STANDARD
SAFETY PRECAUTIONS IN CONNECTION WITH THE USE OF THE WEATHER
INFORMATION, DATA OR DOCUMENTATION.
5
Limitation of Damages
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL
HTC OR ITS PROVIDERS BE LIABLE TO USER OR ANY THIRD PARTY FOR ANY
INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES OF ANY
KIND, IN CONTRACT OR TORT, INCLUDING, BUT NOT LIMITED TO, INJURY, LOSS OF
REVENUE, LOSS OF GOODWILL, LOSS OF BUSINESS OPPORTUNITY, LOSS OF DATA,
AND/OR LOSS OF PROFITS ARISING OUT OF, OR RELATED TO, IN ANY MANNER,
OR THE DELIVERY, PERFORMANCE OR NONPERFORMANCE OF OBLIGATIONS, OR
USE OF THE WEATHER INFORMATION, DATA OR DOCUMENTATION HEREUNDER
REGARDLESS OF THE FORESEEABILITY THEREOF.
Important Health Information and Safety Precautions
When using this product, the safety precautions below must be taken to avoid
possible legal liabilities and damages.
Retain and follow all product safety and operating instructions. Observe all
warnings in the operating instructions on the product.
To reduce the risk of bodily injury, electric shock, fire, and damage to the
equipment, observe the following precautions.
ELECTRICAL SAFETY
This product is intended for use when supplied with power from the designated
battery or power supply unit. Other usage may be dangerous and will invalidate
any approval given to this product.
SAFETY PRECAUTIONS FOR PROPER GROUNDING INSTALLATION
CAUTION: Connecting to an improperly grounded equipment can result in an
electric shock to your device.
This product equipped with a USB Cable for connecting with desktop or notebook
computer. Be sure your computer is properly grounded (earthed) before
connecting this product to the computer. The power supply cord of a desktop or
ꢂ
notebook computer has an equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet which is properly
installed and grounded in accordance with all local codes and ordinances.
SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT
•
Use the correct external power source
A product should be operated only from the type of power source indicated
on the electrical ratings label. If you are not sure of the type of power source
required, consult your authorized service provider or local power company.
For a product that operates from battery power or other sources, refer to the
operating instructions that are included with the product.
•
Handle battery packs carefully
This product contains a Li-ion battery. There is a risk of fire and burns if the
battery pack is handled improperly. Do not attempt to open or service the
battery pack. Do not disassemble, crush, puncture, short external contacts or
circuits, dispose of in fire or water, or expose a battery pack to temperatures
higher than ꢂ0˚C (140˚F).
WARNING: Danger of explosion if battery is incorrectly replaced. To reduce risk
of fire or burns, do not disassemble, crush, puncture, short external contacts,
expose to temperature above ꢂ0° C (140° F), or dispose of in fire or water.
Replace only with specified batteries. Recycle or dispose of used batteries
according to the local regulations or reference guide supplied with your
product.
•
Take extra precautions
•
Keep the battery or device dry and away from water or any liquid as it may
cause a short circuit.
ꢃ
•
•
•
Keep metal objects away so they don’t come in contact with the battery or
its connectors as it may lead to short circuit during operation.
Do not use a battery that appears damaged, deformed, or discolored, or
the one that has any rust on its casing, overheats, or emits a foul odor.
Always keep the battery out of the reach of babies and small children, to
avoid swallowing of the battery. Consult the doctor immediately if the
battery is swallowed.
•
If the battery leaks:
•
•
•
Do not allow the leaking fluid to come in contact with skin or clothing.
If already in contact, flush the affected area immediately with clean
water and seek medical advice.
Do not allow the leaking fluid to come in contact with eyes. If already
in contact, DO NOT rub; rinse with clean water immediately and seek
medical advice.
Take extra precautions to keep a leaking battery away from fire as
there is a danger of ignition or explosion.
SAFETY PRECAUTIONS FOR DIRECT SUNLIGHT
Keep this product away from excessive moisture and extreme temperatures. Do not
leave the product or its battery inside a vehicle or in places where the temperature
may exceed ꢂ0°C (140°F), such as on a car dashboard, window sill, or behind a glass
that is exposed to direct sunlight or strong ultraviolet light for extended periods
of time. This may damage the product, overheat the battery, or pose a risk to the
vehicle.
PREVENTION OF HEARING LOSS
CAUTION: Permanent hearing loss may occur if earphones or
headphones are used at high volume for prolonged periods
of time.
8
NOTE: For France, Earphone (listed below) for this device have been tested to comply
with the Sound Pressure Level requirement laid down in the applicable NF EN 50ꢁꢁꢀ-
1:ꢀ000 and/or NF EN 50ꢁꢁꢀ-ꢀ:ꢀ00ꢁ standards as required by French Article L. 5ꢀꢁꢀ-1.
•
Earphone, manufactured by HTC, Model HS Sꢁ00.
SAFETY IN AIRCRAFT
Due to the possible interference caused by this product to an aircraft’s navigation
system and its communications network, using this device’s phone function on
board an airplane is against the law in most countries. If you want to use this
device when on board an aircraft, remember to turn off your phone by switching to
Airplane Mode.
ENVIRONMENT RESTRICTIONS
Do not use this product in gas stations, fuel depots, chemical plants or where
blasting operations are in progress, or in potentially explosive atmospheres such
as fuelling areas, fuel storehouses, below deck on boats, chemical plants, fuel or
chemical transfer or storage facilities, and areas where the air contains chemicals or
particles, such as grain, dust, or metal powders. Please be aware that sparks in such
areas could cause an explosion or fire resulting in bodily injury or even death.
EXPLOSIVE ATMOSPHERES
When in any area with a potentially explosive atmosphere or where flammable
materials exist, the product should be turned off and the user should obey all signs
and instructions. Sparks in such areas could cause an explosion or fire resulting in
bodily injury or even death. Users are advised not to use the equipment at refueling
points such as service or gas stations, and are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots, chemical plants, or where
blasting operations are in progress. Areas with a potentially explosive atmosphere
are often, but not always, clearly marked. These include fueling areas, below deck
on boats, fuel or chemical transfer or storage facilities, and areas where the air
contains chemicals or particles, such as grain, dust, or metal powders.
9
ROAD SAFETY
Vehicle drivers in motion are not permitted to use telephony services with
handheld devices, except in the case of emergency. In some countries, using hands-
free devices as an alternative is allowed.
SAFETY PRECAUTIONS FOR RF EXPOSURE
•
•
•
•
Avoid using your phone near metal structures (for example, the steel frame of
a building).
Avoid using your phone near strong electromagnetic sources, such as
microwave ovens, sound speakers, TV and radio.
Use only original manufacturer-approved accessories, or accessories that do
not contain any metal.
Use of non-original manufacturer-approved accessories may violate your
local RF exposure guidelines and should be avoided.
INTERFERENCE WITH MEDICAL EQUIPMENT FUNCTIONS
This product may cause medical equipment to malfunction. The use of this device is
forbidden in most hospitals and medical clinics.
If you use any other personal medical device, consult the manufacturer of your
device to determine if they are adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this information.
Turn your phone OFF in health care facilities when any regulations posted in
these areas instruct you to do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
HEARING AIDS
Some digital wireless phones may interfere with some hearing aids. In the event
of such interference, you may want to consult your service provider, or call the
customer service line to discuss alternatives.
10
NONIONIZING RADIATION
Your device has an internal antenna. This product should be operated in its normal-
use position to ensure the radiative performance and safety of the interference.
As with other mobile radio transmitting equipment, users are advised that for
satisfactory operation of the equipment and for the safety of personnel, it is
recommended that no part of the human body be allowed to come too close to the
antenna during operation of the equipment.
Use only the supplied integral antenna. Use of unauthorized or modified antennas
may impair call quality and damage the phone, causing loss of performance and
SAR levels exceeding the recommended limits as well as result in non-compliance
with local regulatory requirements in your country.
To assure optimal phone performance
and ensure human exposure to RF
energy is within the guidelines set
forth in the relevant standards, always
use your device only in its normal-use
position. Contact with the antenna
area may impair call quality and cause
your device to operate at a higher
power level than needed. Avoiding
contact with the antenna area when the
phone is IN USE optimizes the antenna
performance and the battery life.
Antenna
location
11
General Precautions
•
Avoid applying excessive pressure to the device
Do not apply excessive pressure on the screen and the device to prevent
damaging them and remove the device from your pants’pocket before sitting
down. It is also recommended that you store the device in a protective case
and only use the device stylus or your finger when interacting with the touch
screen. Cracked display screens due to improper handling are not covered by
the warranty.
•
Device getting warm after prolonged use
When using your device for prolonged periods of time, such as when you’re
talking on the phone, charging the battery or browsing the web, the device
may become warm. In most cases, this condition is normal and therefore
should not be interpreted as a problem with the device.
•
•
Heed service markings
Except as explained elsewhere in the Operating or Service documentation, do
not service any product yourself. Service needed on components inside the
device should be done by an authorized service technician or provider.
Damage requiring service
Unplug the product from the electrical outlet and refer servicing to an
authorized service technician or provider under the following conditions:
•
•
•
•
•
Liquid has been spilled or an object has fallen onto the product.
The product has been exposed to rain or water.
The product has been dropped or damaged.
There are noticeable signs of overheating.
The product does not operate normally when you follow the operating
instructions.
•
Avoid hot areas
The product should be placed away from heat sources such as radiators, heat
registers, stoves, or other products (including amplifiers) that produce heat.
1ꢀ
•
•
Avoid wet areas
Never use the product in a wet location.
Avoid using your device after a dramatic change in temperature
When you move your device between environments with very different
temperature and/or humidity ranges, condensation may form on or within
the device. To avoid damaging the device, allow sufficient time for the
moisture to evaporate before using the device.
NOTICE: When taking the device from low-temperature conditions into a warmer
environment or from high-temperature conditions into a cooler environment,
allow the device to acclimate to room temperature before turning on power.
•
•
Avoid pushing objects into product
Never push objects of any kind into cabinet slots or other openings in the
product. Slots and openings are provided for ventilation. These openings
must not be blocked or covered.
Mounting accessories
Do not use the product on an unstable table, cart, stand, tripod, or bracket.
Any mounting of the product should follow the manufacturer’s instructions,
and should use a mounting accessory recommended by the manufacturer.
•
•
Avoid unstable mounting
Do not place the product with an unstable base.
Use product with approved equipment
This product should be used only with personal computers and options
identified as suitable for use with your equipment.
•
•
Adjust the volume
Turn down the volume before using headphones or other audio devices.
Cleaning
Unplug the product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning, but NEVER use
water to clean the LCD screen.
1ꢁ
Contents
Chapter 1 Getting Started
23
1.1 Getting to Know Your Touch Phone and Accessories ..................................... 24
Left panel.....................................................................................................................................ꢀ4
Right panel..................................................................................................................................ꢀ4
Front panel ................................................................................................................................ꢀ5
Back panel ...................................................................................................................................ꢀꢂ
Top panel .....................................................................................................................................ꢀꢃ
Bottom panel..............................................................................................................................ꢀꢃ
Accessories..................................................................................................................................ꢀ8
1.2 Installing the SIM Card, Battery, and Storage Card........................................ 28
SIM card........................................................................................................................................ꢀ9
Battery...........................................................................................................................................ꢀ9
Storage card................................................................................................................................ꢁ1
1.3 Charging the Battery ........................................................................................ 32
1.4 Using the Strap Holder ..................................................................................... 33
1.5 Starting Up ........................................................................................................ 34
Turn your device on and off..................................................................................................ꢁ4
Auto configure the data connection settings ................................................................ꢁ5
Switch to Sleep mode when not in use............................................................................ꢁ5
1.6 Navigating Your Device .................................................................................... 36
Finger-touch control................................................................................................................ꢁꢂ
Stylus.............................................................................................................................................ꢁ8
Navigation Control...................................................................................................................ꢁ8
1.7 Home Screen ..................................................................................................... 40
Tasks screen ................................................................................................................................41
1.8 Status Icons ....................................................................................................... 41
1.9 Start Menu......................................................................................................... 45
14
1.10 Quick Menu..................................................................................................... 46
1.11 LED Alerts ........................................................................................................ 47
1.12 Adjusting the Volume..................................................................................... 48
1.13 Using your Device as a USB Drive.................................................................. 49
Chapter 2 Using Phone Features
51
2.1 Using the Phone................................................................................................ 52
The Phone screen .....................................................................................................................5ꢀ
Enter your PIN ............................................................................................................................5ꢀ
2.2 Voice Call ........................................................................................................... 53
Make a call...................................................................................................................................5ꢁ
Answer a call...............................................................................................................................54
End a call .....................................................................................................................................5ꢃ
Call History..................................................................................................................................58
Speed Dial ...................................................................................................................................58
Turn the phone function on and off ..................................................................................59
2.3 Video Call........................................................................................................... 60
Make a video call.......................................................................................................................ꢂ0
Answer a video call...................................................................................................................ꢂ0
End a video call .........................................................................................................................ꢂ1
Change settings ........................................................................................................................ꢂ1
2.4 Smart Dial.......................................................................................................... 64
Make a call or send a text message using Smart Dial..................................................ꢂ5
2.5 Setting Up Bluetooth SIM Access for Car Kit Phones ..................................... 66
Chapter 3 TouchFLO™ 3D
67
3.1 About TouchFLO™ 3D........................................................................................ 68
3.2 Using the TouchFLO 3D Home Screen ............................................................. 68
Home.............................................................................................................................................ꢃ0
People ...........................................................................................................................................ꢃꢀ
Messages .....................................................................................................................................ꢃ4
15
Mail.................................................................................................................................................ꢃ5
Internet.........................................................................................................................................ꢃꢂ
Photos and Videos....................................................................................................................ꢃꢃ
Music .............................................................................................................................................ꢃ8
Weather........................................................................................................................................8ꢀ
Settings.........................................................................................................................................84
Programs......................................................................................................................................84
3.3 Finger Gestures................................................................................................. 85
Finger scrolling ..........................................................................................................................85
Finger zooming .........................................................................................................................8ꢂ
Finger panning ..........................................................................................................................8ꢂ
Chapter 4 Entering Text
87
4.1 Entering Information........................................................................................ 88
QWERTY keyboard ...................................................................................................................88
On-screen input methods......................................................................................................88
4.2 Using the Hardware Keyboard......................................................................... 90
4.3 Using the Full QWERTY..................................................................................... 91
4.4 Using the Compact QWERTY............................................................................ 92
4.5 Using the Phone Keypad .................................................................................. 93
4.6 Using Multitap and T9 Modes .......................................................................... 94
Multitap mode...........................................................................................................................94
T9 mode .......................................................................................................................................94
4.7 Using Numeric and Symbol Mode ................................................................... 96
4.8 Using Block Recognizer .................................................................................... 97
4.9 Using Letter Recognizer ................................................................................... 98
4.10 Using Transcriber ............................................................................................ 98
Chapter 5 Synchronizing Information With Your Computer
101
5.1 About Synchronization ..................................................................................102
5.2 Setting Up Windows Mobile® Device Center on Windows Vista® ................103
1ꢂ
Set up synchronization in Windows Mobile Device Center.................................... 104
Use Windows Mobile Device Center............................................................................... 105
5.3 Setting Up ActiveSync® on Windows® XP......................................................106
Install ActiveSync................................................................................................................... 10ꢂ
Set up synchronization in ActiveSync............................................................................ 10ꢂ
5.4 Synchronizing With Your Computer ..............................................................107
Start and stop synchronization......................................................................................... 10ꢃ
Change which information is synchronized ................................................................ 108
Troubleshoot sync connection problem....................................................................... 108
5.5 Synchronizing via Bluetooth .........................................................................109
5.6 Synchronizing Music and Video.....................................................................110
Chapter 6 Exchanging Messages
111
6.1 Messaging .......................................................................................................112
6.2 Text Messages .................................................................................................113
Create a new text message ................................................................................................ 11ꢁ
Compose and send a text message ................................................................................ 114
Manage text messages........................................................................................................ 114
6.3 MMS .................................................................................................................117
Change MMS settings .......................................................................................................... 11ꢃ
Create and send MMS messages...................................................................................... 118
View and reply to MMS messages ................................................................................... 1ꢀ1
6.4 Types of E-mail Accounts................................................................................122
Set up your device to synchronize Outlook e-mail with the computer............. 1ꢀꢁ
Add an e-mail account......................................................................................................... 1ꢀꢁ
6.5 E-mail Setup Wizard........................................................................................124
Set up an Internet e-mail account................................................................................... 1ꢀ4
Set up a custom domain e-mail........................................................................................ 1ꢀꢃ
6.6 Using E-mail.....................................................................................................128
Create a new e-mail message............................................................................................ 1ꢀ8
Compose and send an e-mail............................................................................................ 1ꢀ9
1ꢃ
Filter the Inbox message list .............................................................................................. 1ꢀ9
View and reply to messages .............................................................................................. 1ꢁ0
Synchronize e-mails.............................................................................................................. 1ꢁꢀ
Customize e-mail settings .................................................................................................. 1ꢁꢀ
Chapter 7 Working With Company E-mails and Meeting Appointments 135
7.1 Synchronizing with the Exchange Server .....................................................136
Set up an Exchange Server connection......................................................................... 1ꢁꢂ
Start synchronization ........................................................................................................... 1ꢁꢃ
7.2 Working With Company E-mails ....................................................................138
Automatic synchronization through Direct Push ...................................................... 1ꢁ8
Scheduled synchronization ............................................................................................... 1ꢁ9
Instant download through Fetch Mail ........................................................................... 1ꢁ9
Search for e-mails on the Exchange Server.................................................................. 140
Flag your messages............................................................................................................... 141
Out-of-office auto-reply...................................................................................................... 14ꢀ
7.3 Managing Meeting Requests .........................................................................142
7.4 Finding Contacts in the Company Directory.................................................144
Chapter 8 Internet
147
8.1 Ways of Connecting to the Internet...............................................................148
Wi-Fi............................................................................................................................................ 148
GPRS/ꢁG.................................................................................................................................... 15ꢀ
Dial-up ....................................................................................................................................... 15ꢁ
8.2 Starting a Data Connection............................................................................154
8.3 Using Opera Mobile™......................................................................................154
View web pages ..................................................................................................................... 15ꢂ
Opera Mobile menu.............................................................................................................. 15ꢃ
8.4 Using YouTube™ ..............................................................................................158
Browse for videos................................................................................................................... 158
Watching videos..................................................................................................................... 1ꢂ0
18
Bookmarks................................................................................................................................ 1ꢂꢀ
History........................................................................................................................................ 1ꢂꢀ
8.5 Using Streaming Media ..................................................................................163
8.6 Using Windows Live™......................................................................................165
Set up Windows Live™.......................................................................................................... 1ꢂ5
The Windows Live™ interface............................................................................................ 1ꢂꢃ
Windows Live™ Messenger ................................................................................................ 1ꢂꢃ
Launch Messenger and sign in ......................................................................................... 1ꢂ8
Add Windows Live™ contacts............................................................................................ 1ꢂ9
8.7 Using Your Device as a Modem (Internet Sharing).......................................170
8.8 Using RSS Hub.................................................................................................173
Subscribe to and organize news channels................................................................... 1ꢃꢁ
View and organize headlines............................................................................................. 1ꢃ5
View the news summary..................................................................................................... 1ꢃꢂ
Chapter 9 Bluetooth
179
9.1 Bluetooth Modes ............................................................................................180
9.2 Bluetooth Partnerships ..................................................................................181
9.3 Connecting a Bluetooth Hands-free or Stereo Headset ..............................182
9.4 Beaming Information Using Bluetooth.........................................................183
9.5 Bluetooth Explorer and Bluetooth File Sharing ...........................................185
9.6 Printing Files via Bluetooth............................................................................186
Chapter 10 Navigating on the Road
189
10.1 Guidelines and Preparation for Using GPS.................................................190
10.2 Downloading Satellite Data via QuickGPS .................................................191
Download options................................................................................................................. 19ꢀ
Chapter 11 Experiencing Multimedia
193
11.1 Taking Photos and Videos............................................................................194
Capture modes ....................................................................................................................... 194
Camera controls ..................................................................................................................... 19ꢂ
19
On-screen controls and indicators .................................................................................. 19ꢂ
Menu Panel .............................................................................................................................. 198
Zooming.................................................................................................................................... 199
The Review screen................................................................................................................. ꢀ01
Advanced Options................................................................................................................. ꢀ0ꢀ
11.2 Viewing Photos and Videos Using Album...................................................205
Select a photo or video to view........................................................................................ ꢀ0ꢂ
View an image......................................................................................................................... ꢀ0ꢂ
Play back video....................................................................................................................... ꢀ10
Close Album............................................................................................................................. ꢀ10
11.3 Using Windows Media® Player Mobile ........................................................211
About the controls ................................................................................................................ ꢀ1ꢀ
About the screens and menus.......................................................................................... ꢀ1ꢀ
Synchronize video and audio files................................................................................... ꢀ1ꢁ
Play media................................................................................................................................ ꢀ15
Playlists...................................................................................................................................... ꢀ1ꢂ
Troubleshooting..................................................................................................................... ꢀ1ꢂ
11.4 Using FM Radio .............................................................................................217
FM Radio controls.................................................................................................................. ꢀ1ꢃ
Device controls used in FM Radio.................................................................................... ꢀ19
Save presets............................................................................................................................. ꢀ19
FM Radio Main Menu............................................................................................................ ꢀꢀ0
11.5 Using Audio Booster.....................................................................................221
11.6 Using MP3 Trimmer ......................................................................................222
Chapter 12 Programs
225
12.1 Programs on your Device .............................................................................226
12.2 Adding and Removing Programs ................................................................230
12.3 Adobe® Reader® LE .......................................................................................231
12.4 Calendar ........................................................................................................232
ꢀ0
Create appointments ........................................................................................................... ꢀꢁꢀ
View appointments............................................................................................................... ꢀꢁ4
Send appointments .............................................................................................................. ꢀꢁ5
12.5 Contacts ........................................................................................................236
Add new contacts.................................................................................................................. ꢀꢁꢂ
Organize and search contacts........................................................................................... ꢀꢁ8
Share contact information.................................................................................................. ꢀꢁ9
12.6 Comm Manager.............................................................................................240
12.7 JETCET™ PRINT..............................................................................................241
Open JETCET PRINT............................................................................................................... ꢀ41
Set up a printer....................................................................................................................... ꢀ4ꢀ
Print a file.................................................................................................................................. ꢀ4ꢀ
Print a web page .................................................................................................................... ꢀ4ꢁ
12.8 Microsoft® Office Mobile..............................................................................243
12.9 Notes..............................................................................................................245
12.10 JBlend...........................................................................................................246
Install and launch MIDlets or MIDlet suites.................................................................. ꢀ4ꢂ
Manage MIDlets and MIDlet suites ................................................................................. ꢀ4ꢃ
12.11 SIM Manager ...............................................................................................249
12.12 Spb GPRS Monitor ......................................................................................251
Install GPRS Monitor............................................................................................................. ꢀ51
The GPRS Monitor icon and pop-up window.............................................................. ꢀ51
Set up monitoring and notification ................................................................................ ꢀ5ꢀ
View charts and reports....................................................................................................... ꢀ5ꢁ
12.13 Sprite Backup..............................................................................................254
12.14 Tasks ............................................................................................................257
12.15 Voice Commander.......................................................................................258
Open Voice Commander..................................................................................................... ꢀ58
Create a voice tag for a contact........................................................................................ ꢀ59
Create a voice tag for a program...................................................................................... ꢀꢂ0
ꢀ1
12.16 Voice Recorder ............................................................................................260
12.17 WorldCard Mobile.......................................................................................262
Capture and export business card information.......................................................... ꢀꢂꢁ
12.18 ZIP ................................................................................................................265
Chapter 13 Managing Your Device
267
13.1 Copying and Managing Files .......................................................................268
13.2 Settings on your Device ...............................................................................269
Personal tab............................................................................................................................. ꢀꢂ9
System tab................................................................................................................................ ꢀꢃ0
Connections tab..................................................................................................................... ꢀꢃꢁ
13.3 Changing Basic Settings...............................................................................274
Date and time.......................................................................................................................... ꢀꢃ4
Regional settings ................................................................................................................... ꢀꢃ4
Display settings ...................................................................................................................... ꢀꢃ5
Device name............................................................................................................................ ꢀꢃꢂ
Ringer settings........................................................................................................................ ꢀꢃꢂ
Alarms and notifications ..................................................................................................... ꢀꢃꢃ
Phone services........................................................................................................................ ꢀꢃ8
13.4 Using Connection Setup...............................................................................278
13.5 Using Task Manager......................................................................................280
13.6 Connecting to an External Display..............................................................282
Connect the device to an external display................................................................... ꢀ8ꢀ
13.7 Protecting Your Device.................................................................................283
Protect your SIM card with a PIN...................................................................................... ꢀ8ꢁ
Protect your device with a password.............................................................................. ꢀ8ꢁ
Encrypt files on your storage card................................................................................... ꢀ84
13.8 Managing Memory .......................................................................................285
13.9 Resetting Your Device...................................................................................286
Soft reset................................................................................................................................... ꢀ8ꢂ
Hard reset ................................................................................................................................. ꢀ8ꢂ
ꢀꢀ
Clear Storage........................................................................................................................... ꢀ8ꢃ
13.10 Windows Update.........................................................................................288
13.11 Battery Saving Tips.....................................................................................289
Appendix
291
A.1 Specifications..................................................................................................292
A.2 Regulatory Notices.........................................................................................295
Index
303
Chapter 1
Getting Started
1.1 Getting to Know Your Touch Phone and Accessories
1.2 Installing the SIM Card, Battery, and Storage Card
1.3 Charging the Battery
1.4 Using the Strap Holder
1.5 Starting Up
1.6 Navigating Your Device
1.7 Home Screen
1.8 Status Icons
1.9 Start Menu
1.10 Quick Menu
1.11 LED Alerts
1.12 Adjusting the Volume
1.13 Using your Device as a USB Drive
ꢀ4 Getting Started
1.1 Getting to Know Your Touch Phone and Accessories
Left panel
Right panel
VOLUME UP
During a call or when
playing music, press
this button to increase
the volume.
VOLUME DOWN
During a call or when
playing music, press
this button to lower
the volume.
Stylus
(See “Stylus”in this
chapter for details.)
Getting Started ꢀ5
Front panel
Hardware Keyboard
See Chapter 4 for
details.
Earpiece
Listen to a phone
call from here.
Second Camera
Touch Screen
Use this camera for
video call conversations
or to take a self-portrait.
HOME
Press to return to the
Home screen. See
Chapter ꢁ for details.
BACK
Press to return to the
previous screen.
END
• Press to end a call or
return to the Home
screen.
• Press and hold to lock
the device.
(See “Long Press End
Key”under “Settings on
your Device”in Chapter
1ꢁ for details.)
Navigation Control
TALK/SEND
This Navigation Control • Press to answer an incoming call or dial a number.
is both press-sensitive
and touch-sensitive.
See “Navigation Control”
later in this chapter for
details.
• During a call, press and hold to toggle the
speakerphone on and off.
ꢀꢂ Getting Started
Notes When using the four buttons — HOME, BACK, TALK/SEND, and END — and the
Navigation Control, please observe the following precautions:
•
Make sure to press on the icons of the four buttons for the best accuracy. When
pressing on the Navigation Control, make sure to press the outer areas near the
ENTER button for directional control.
•
For best results, press with your fingertip. Do not wear gloves.
Back panel
3.2 Megapixel Camera
See “Taking Photos and
Videos”in Chapter 11
for details.
Speaker
Flash Light
Back Cover
Push the back cover
upward to remove it.
Strap Holder
See “Using the Strap Holder”in
this chapter for details.
Getting Started ꢀꢃ
Top panel
POWER
Press to turn off the display temporarily. To turn off
the power, press and hold for about 5 seconds.
For more information, see “Starting Up”in this chapter.
Bottom panel
Microphone
Reset
With the stylus, press the
Reset button to soft-reset
the device.
Sync Connector/Earphone Jack/TV Out
• Connect the supplied USB cable to synchronize information or plug in the AC
adapter to recharge the battery.
• Connect the supplied USB stereo headset for hands-free conversation or for
listening to audio media.
• Connect an HTC composite video and audio cable (purchased separately) to
output the device screen contents and device audio to an external viewing
device.
ꢀ8 Getting Started
Accessories
The product package includes the following items and accessories:
•
•
•
•
•
•
•
•
•
Battery
AC adapter
Screen protector
Stereo headset
USB sync cable
Pouch
Quick Start Guide and TouchFLO ꢁD Guide
Getting Started and Application discs
Extra stylus
1.2 Installing the SIM Card, Battery, and Storage Card
Always turn off your device before installing or replacing the SIM card, battery, and
storage card. You also need to remove the back cover before you can install these
components.
To remove the back cover
1. Make sure your device is turned off.
2. Hold the device with both hands and the front
panel facing down.
3. Push the back cover up with your thumb until it
disengages from the device and then slide it up
to remove.
Getting Started ꢀ9
SIM card
The SIM card contains your phone number, service details, and phonebook/
message memory. Your device supports both 1.8V and ꢁV SIM cards.
Note
Some legacy SIM cards may not function with your device. You should consult with
your service provider for a replacement SIM card. There may be fees for this service.
To install the SIM card
1. Make sure your device is turned off.
Cut-off corner
2. Locate the SIM card slot, then insert
the SIM card with its gold contacts
facing down and its cut-off corner
facing out the card slot.
3. Slide the SIM card completely into
the slot.
To remove the SIM card
1. Remove the battery if it is installed.
2. Slide the SIM card out from the SIM card slot with your thumb.
Battery
Your device comes with a rechargeable Lithium-ion or Lithium-ion polymer
battery and is designed to use only manufacturer-specified original batteries and
accessories. Battery performance depends on many factors, including network
configuration, signal strength, the temperature of the environment in which you
operate your device, the features and/or settings you select and use, items attached
to connecting ports, and your voice, data, and other program usage patterns.
ꢁ0 Getting Started
Battery life estimates (approximations):
•
Standby time: Up to 367 hours for GSM
Up to 462 hours for WCDMA
•
Talk time: Up to 419 minutes for GSM
Up to 378 minutes WCDMA
•
Video call time: Up to 189 minutes for WCDMA
Note
Battery life is subject to network and phone usage.
Warning!
To reduce risk of fire or burns:
•
•
Do not attempt to open, disassemble, or service the battery pack.
Do not crush, puncture, short external contacts, or dispose of in fire or
water.
•
•
•
Do not expose to temperatures above ꢂ0oC (140oF).
Replace only with the battery pack designated for this product.
Recycle or dispose of used battery as stipulated by local regulations.
To install the battery
1. Align the battery’s exposed
copper contacts with the battery
connectors inside the battery
compartment.
2. Insert the contact’s side of the
battery first and then gently push
the battery into place.
3. Replace the back cover.
Getting Started ꢁ1
To remove the battery
1. Make sure your device is turned off.
2. Remove the back cover.
3. The bottom right side of the
battery has a protruding grip. Lift
the protruding grip to remove the
battery.
Battery grip
Storage card
To have additional storage for your images, videos, music, and files, you can
purchase a microSD™ card and install it into your device.
To install a microSD card
Insert the microSD card into the slot with
its gold contacts facing down.
Note
To remove the microSD card, press it
to eject it from the slot.
ꢁꢀ Getting Started
1.3 Charging the Battery
New batteries are shipped partially charged. Before you start using your device, it is
recommended that you install and charge the battery. Some batteries perform best
after several full charge/discharge cycles.
To charge the battery
1. Connect the USB connector of the AC adapter to the sync connector on your
device.
2. Plug in the AC adapter to an electrical outlet to start charging the battery.
Note
Only the AC adapter and USB sync cable provided with your device must be used to
charge the device.
Charging is indicated by a “breathing”white light around the Navigation Control. As
the battery is being charged while the power is on, a charging icon also appears
in the title bar of the Home screen. After the battery has been fully charged,
the Navigation Control LED shows a solid white light and a full battery icon
appears in the title bar of the Home screen.
For more information about the Navigation Control LED, see “LED Alerts”in this
chapter.
Warning!
• Do not remove the battery from the device while you are charging it using
the AC or car adapter.
• As a safety precaution, the battery stops charging when it overheats.
Getting Started ꢁꢁ
1.4 Using the Strap Holder
The strap holder at the bottom panel of your device allows you to attach a wrist
strap, neck lanyard, or string accessory.
To attach a strap, lanyard or string accessory to the strap holder
1. Remove the back cover.
2. Insert the loop of the strap, lanyard
or string accessory through the
strap holder hole on the back
cover.
Tip
To pass through the strap
holder hole easier, push the
loop into the strap holder hole
using a pointed object such as a
needle or toothpick.
3. Attach the loop over the small
T-shaped hook at the bottom of
the device.
4. Secure the strap, lanyard or string
string accessory on the T-shaped
hook as shown in the illustration
on the right.
5. Replace the back cover.
ꢁ4 Getting Started
1.5 Starting Up
After installing your SIM card and battery and charging the battery, you can now
power on and start using your device.
Turn your device on and off
To turn on the power
1. Press and hold the POWER button for a few seconds.
2. When you turn on your device for the first time, a Quick Start Wizard guides
you to set up regional settings, date and time, and password. For more
information about these settings, see Chapter 1ꢁ. After the Quick Start Wizard
finishes, the device installs customization settings, then restarts.
Note
After the device restarts, you may be prompted to set up an e-mail account. For
instructions on how to set up an e-mail account, see Chapter ꢂ.
To turn off the power
1. Press and hold the POWER button for a few seconds.
2. Tap Yes when a message prompts you to choose whether or not to turn off
the device completely.
Getting Started ꢁ5
Auto configure the data connection settings
The first time you power on your device, you will
see a notification message from Connection
Setup. Connection Setup automatically configures
your device’s data connections, such as ꢁG/GPRS,
WAP, and MMS, so that you do not need to enter
the settings manually for your device.
To automatically configure data connection
settings
1. When you see the notification message from
the Connection Setup, tap Yes.
Note If you do not see the notification message, tap the title bar to display the System
Status screen, then tap on the title bar to display the message.
2. If your SIM card supports multiple network operator profiles, a message will
appear with network profile choices. Select the profile you want to use and
tap OK.
3. Connection Setup then starts to configure your device’s data connection
settings.
4. After the Connection Setup completes the configuration, tap Restart.
For more information about Connection Setup, see Chapter 1ꢁ.
Switch to Sleep mode when not in use
Press and immediately release the POWER button to turn off the display temporarily
and switch your device to Sleep mode. Sleep mode suspends your device to a low
power state while the display is off in order to save battery power.
Your device automatically goes into Sleep mode when you leave the device idle
after a certain period of time. You will still be able to receive messages and calls
while your device is in Sleep mode. Pressing the POWER button again, removing
the stylus, or incoming calls/messages will wake up your device.
ꢁꢂ Getting Started
1.6 Navigating Your Device
There are different ways you can navigate and interact with the interface of your
device.
Finger-touch control
A quick and easy way to interact with the home screen and the whole interface
of your device is by touch. Basically, the following are the types of actions, called
finger gestures, you would use when interacting with your device:
Touch or tap
When selecting items on the screen, such as the Home screen tabs, Start menu,
programs and settings icons, and large on-screen buttons, simply touch them with
your finger. Apply some pressure with your finger pad when touching an item on
the screen.
Tapping means to touch lightly and quickly with your finger pad or fingertip. On
screens that display smaller-size items, you can more accurately select an item by
tapping it with your fingertip.
Swipe
To swipe means to drag your finger vertically or horizontally across the screen. The
following are some instances when you would use swiping:
•
Flipping on the Home screen
Swipe your finger vertically to flip through favorite contacts, messages, music
albums, photos, and more. For more information, see “Using the TouchFLO ꢁD
Home Screen”in Chapter ꢁ.
•
Scrolling
When browsing the contacts list, web pages, documents, and certain
selection lists on the Home screen (such as the All Programs list), slowly
swipe your finger vertically across the screen to scroll. This allows you to scroll
by page and to view the content or available selections as you scroll.
Getting Started ꢁꢃ
The direction of swiping resembles the way you move a printed document as
you are reading it. For detailed instructions, see “Finger scrolling”in Chapter ꢁ.
Slide
Sliding on the touch screen also involves dragging with your finger, but you need
to press and hold your finger with some pressure before you start to drag. While
dragging, do not release your finger until you have reached the target position.
The following are some instances when you would use sliding:
•
Switching between Home screen tabs
Slide your finger left and right to switch between the Home screen tabs. For
more information, see “Using the TouchFLO ꢁD Home screen“ in Chapter ꢁ.
•
Advancing playback
In players that have a progress bar, such as the Home screen’s Music tab
and Windows Media® Player Mobile, slide your finger horizontally on their
progress bar to advance forward or move backward in the music or video you
are playing.
For more information about the Home screen’s Music tab, see “Music”in
Chapter ꢁ.
For more information about Windows Media® Player Mobile, see “Using
Windows Media® Player Mobile”in Chapter 11.
Flick
Flicking the screen is similar to swiping, except that you need to swipe your finger
in light, quicker strokes. This finger gesture is always in a vertical direction, such as
when flicking the contacts list. See “Finger scrolling”in Chapter ꢁ for details.
Finger zooming and panning
In programs such as Album and Opera Mobile, you can use finger gestures when
zooming and panning. See Chapter ꢁ, 8 and 11 for details.
ꢁ8 Getting Started
Stylus
You can use the stylus to navigate and interact
with the touch screen. To use the stylus, pull it
out from the stylus compartment at the bottom
of the right panel of your device. If the backlight
is off, removing the stylus automatically turns the
backlight back on.
The stylus is magnetic and sticks to the side when held close to the device. This
prevents you from accidentally losing or misplacing the stylus.
Basically, you tap with the stylus to open programs and select items on the screen,
and you tap and hold on the screen to open a shortcut menu. You can also use the
stylus the same way as what you do with finger gestures, such as swiping, sliding
and flicking on the screen.
Navigation Control
On the home screen and in many programs on your device, you can use the
Navigation Control for directional control. Press the directional arrows to navigate
up, down, left, and right on the screen. When an item has been selected on the
screen, press the ENTER button (the center button) to confirm your selection.
Getting Started ꢁ9
The Navigation Control is also touch sensitive
and can be used for zooming. Slide your finger
clockwise around the Navigation Control to
zoom in, counterclockwise to zoom out.
The following programs allow you to use the
Navigation Control for zooming:
Sliding your finger clockwise
•
•
•
•
Album
Camera
Opera Mobile
Word Mobile and Excel Mobile
Sliding your finger
counterclockwise
Tip
If you purchase and install GPS navigation software on your device, you can also use
the Navigation Control for zooming in the GPS software.
On the Home screen’s Music tab, you can advance forward in the music you are
playing by sliding clockwise around the Navigation Control. To move backward in
the music, slide counterclockwise. See “Music”in Chapter ꢁ for details.
40 Getting Started
1.7 Home Screen
The default home screen of the device is the TouchFLO™ ꢁD Home screen which
allows finger-touch access to the most important functions such as contacts, text
messages, e-mail, Internet, and more.
For more information about using the TouchFLO ꢁD Home screen, see Chapter ꢁ.
Signal strength
Adjust volume
Battery status
Quick menu
Connection status
Notification
Start menu
TouchFLO ꢁD
Home screen
Go to the Programs tab to
access favorite programs
Open the Phone screen
(See Chapter ꢀ for details)
Getting Started 41
Tasks screen
When you open the hardware keyboard
while on the Home screen, a screen is
shown letting you quickly start a task
such as writing an e-mail or SMS message,
creating a new appointment, opening the
web browser, and more.
Note
If you do not have an e-mail account set up on your device, the E-mail setup wizard
will open when you tap Email.
1.8 Status Icons
When you touch or tap the icon area of the title bar, the System Status screen opens
and displays larger status icons so you can touch them with your finger more easily
and accurately.
Tip
The System Status screen can be disabled in TouchFLO settings. See “Settings on your
Device”in Chapter 1ꢁ for details.
4ꢀ Getting Started
The following are some of the status icons that you may see on the device.
Icons that appear in this area
Icons that appear in this area
Speakerphone on
Connection Setup
Multiple notifications; tap the
icon to view all
New text messages;
Roaming
Alarm
SMS notification of voice mail
Other wireless network(s)
detected
Sending MMS
Receiving MMS
MMS sent
Wired headset connected
Bluetooth on
Bluetooth visible mode on
Cannot send MMS
Bluetooth stereo headset
connected
New incoming MMS
New Windows Live™ message
Missed call
Getting Started 4ꢁ
Icons that appear in this area
GPRS available
EDGE available
HSPA available
WCDMA/UMTS available
Connected to a wireless network
Connection is active
Connection is not active
Synchronization in progress
44 Getting Started
Icons that appear in this area
Icons that appear in this area
GPRS connecting
GPRS in use
Vibrate mode
Sound on
Sound off
EDGE connecting
EDGE in use
Icons that appear in this area
HSPA connecting
HSPA in use
Battery charging
Battery full
Battery low
WCDMA/UMTS connecting
WCDMA/UMTS in use
Maximum signal strength
No signal
Phone is turned off
No phone service
Searching for phone service
Voice call in progress
Call on hold
Calls are forwarded
Dialing while no SIM card is inserted
No SIM card inserted
Getting Started 45
1.9 Start Menu
The Start menu, which can be opened from the top left corner of the screen, gives
you access to all the programs and settings of your Windows Mobile-powered
device. Touch or tap to select an item on the Start menu.
Open the Start menu.
Open a recently-used program.
When you are on another
screen, touch or tap this item
to return to the TouchFLO ꢁD
Home screen.
Open a program.
Access more programs.
View and change settings.
View Help information for the
current screen.
By default, the Start menu is displayed in a large size to make it easier for you to
touch menu items with your finger when selecting them from the Start menu. The
Start menu can also be displayed in a smaller size, if preferred. Tap Start >
Settings > System tab > TouchFLO and then clear the Enable large Start menu
check box to display a smaller Start menu.
4ꢂ Getting Started
1.10 Quick Menu
The Quick menu, which can be opened from the top right corner of the screen,
shows the currently running programs. You can quickly switch between running
programs, stop programs, and see how much program memory is being used.
Customize Task Manager settings.
(See “Using Task Manager”in
Chapter 1ꢁ.)
Touch this icon to open
the Quick Menu.
Shows the total percentage
Stop all
of program memory in use.
Touch to open the Memory
settings screen.
currently
running
programs.
• To switch to a running
program, touch the
program name.
• To stop a running
program, touch
.
Getting Started 4ꢃ
1.11 LED Alerts
The buttons below the touch screen and the exterior edge of the Navigation
Control which is an LED ring will light up in the following situations:
Controls
Light Behavior
SEND button
END button
Light flashes when there is an incoming call.
Light stays solid when there is an incoming call.
Navigation Control
• The LED ring shows a “breathing”white light when the battery is
being charged.
• The LED ring shows a solid white light when the battery is fully
charged.
• The LED ring flashes a white light once when the battery level is
low and reaches down to about 10%.
• The top and bottom parts of the LED ring flashes a white light
twice when there is a new e-mail, voice mail, or meeting reminder.
• A white light goes around the LED ring counterclockwise twice
starting from the top when there is a missed call or new SMS or
MMS message.
The LED ring, HOME, BACK, SEND, and END buttons will flash a white light once
when one of the buttons or Navigation Control is pressed.
48 Getting Started
1.12 Adjusting the Volume
Adjusting the system volume changes the volume level of sound notifications and
audio/video playback, whereas adjusting the ring volume affects only the volume
of the phone ring. The system volume and ring volume can be separately adjusted.
1. Touch the icon area in the title bar and then touch the Speaker icon (
) on
the System Status screen.
2. To switch between the Ring Volume and System Volume screens, touch
Ring or System on top of the screen.
3. On either screen, you can do the following:
•
To increase or decrease the volume level, drag your finger up or down the
volume bars. You can also press the VOLUME UP/DOWN buttons on the
left panel of your device.
Volume
bars
•
•
Touch Vibrate to switch both System and Ring to Vibrate mode.
Touch Silent to mute both the system and ring volume.
4. The System Volume or Ring Volume screen automatically closes. You can also
manually close the screen by touching the screen.
Getting Started 49
Note
On certain screens that do not show the volume status icon on the title bar, you need
to use the VOLUME UP/DOWN buttons on the left panel of your device to adjust the
volume. Also use these buttons to adjust the conversation phone volume during an
ongoing call.
1.13 Using your Device as a USB Drive
To easily carry media and other files with you, you can use your device’s storage
card as a USB flash drive. Touch Start > Settings > Connections tab > USB to PC
and then select Disk Drive mode. This allows you to copy files from your computer
to the device’s storage card and vice versa faster.
Note
You need to have a storage card installed on your device to be able to use your device
as a disk drive.
When Disk Drive mode is used:
•
You will not be able to use your device to access files from the storage card
or run applications that are installed on the storage card while the device is
connected to your PC.
•
Your PC will only connect to the device’s storage card. When you access your
device from the PC, you will only see the contents of the device’s storage card.
Remember to change back to ActiveSync mode when you need to synchronize
data between your device and your PC.
50 Getting Started
Chapter 2
Using Phone Features
2.1 Using the Phone
2.2 Voice Call
2.3 Video Call
2.4 Smart Dial
2.5 Setting Up Bluetooth SIM Access for Car Kit Phones
5ꢀ Using Phone Features
2.1 Using the Phone
Like a standard mobile phone, you can use your device to make, receive, and keep
track of calls and send messages.
The Phone screen
To open the Phone screen, do one of the following:
•
•
On the Home screen, tap
Phone.
TALK/SEND
button
Press the TALK/SEND button.
Enter your PIN
Most SIM cards are preset with a PIN (personal identification number) that is
provided by your wireless service provider.
1. Enter the preset PIN assigned by your wireless service provider.
2. Tap Enter.
Note
If you entered the wrong PIN three times, the SIM card will be blocked. If this happens,
you can unblock it with the PUK (PIN Unblocking Key) obtained from your wireless
service provider.
Using Phone Features 5ꢁ
2.2 Voice Call
Make a call
To make a call from the Phone screen
1. On the Home screen, tap Phone.
2. Tap the keys on the keypad to enter the
phone number.
Tip
If you tapped a wrong number, tap
erase each subsequent digit of a number. To
erase the entire number, tap and hold
to
.
3. Press the TALK/SEND button to place the call.
Tip
When in a call, use the VOLUME UP/DOWN
buttons on the side of the device to adjust
the phone volume.
Note
After tapping ꢂ keys and the number you are dialing is not in your contacts, a Save
to Contacts? button will appear above the keypad. Tap it to save the number to your
Contacts.
To make a call from Contacts
On the Home screen, tap Start > Contacts to open the Contacts screen.
Do one of the following:
•
Select the contact to call and then press TALK/SEND.
Note If the contact has more than one number stored, press NAVIGATION Right/Left to
select the number you want to call before pressing TALK/SEND.
•
•
Tap the contact to open the contact details and then tap the phone number
you want to call.
Tap and hold the contact you want to call and then from the menu, select
Call Work, Call Home, or Call Mobile.
54 Using Phone Features
To make a call from the TouchFLO 3D Home screen
Refer to Chapter ꢁ to learn how to make a call from the TouchFLO ꢁD Home screen.
To make an emergency call
Enter the international emergency number for your locale, and press the TALK/
SEND button on your device.
Tip
Additional emergency numbers may be included in your SIM card. Contact your
wireless service provider for details.
To make an international call
1. Tap and hold the number 0 key on the Phone screen until the plus (+) sign
appears.
The plus (+) sign replaces the international prefix of the country that you are
calling.
2. Enter the full phone number you want to dial, and press the TALK/SEND
button on your device. The full phone number includes the country code,
area code (without the leading zero, if any), and phone number.
To call voice mail
Number 1 is generally reserved for your voice mail. Tap and hold this button on the
Phone screen keypad to call voice mail and retrieve your voice mail messages.
Answer a call
When you receive a phone call, a message will appear, giving you the option to
either answer or ignore the incoming call. The TALK/SEND button will also flash
when you receive a call.
Using Phone Features 55
To answer or reject an incoming call
•
•
•
To answer the call, tap Answer, or press the TALK/SEND button.
To reject the call, tap Ignore, or press the END button.
To mute the ringing sound without rejecting the call, tap Mute Ring.
Tip
You can also place your phone face down on a table to mute the ring without
rejecting the call.
To reject a call and send a text message
When you reject a call, you can choose to automatically send a text message to the
mobile phone of the caller.
1. On the Phone screen, tap Menu > Options > Advanced tab.
2. Select the Reject call with text message check box.
3. Change the default text message if needed, then tap OK.
When Reject call with text message is enabled, tap Send Text to reject the call
and send the text message to the caller.
5ꢂ Using Phone Features
To put a call on hold
Your device notifies you when you have another incoming call, and gives you the
option of rejecting or accepting the call. If you are already on a call and accept the
new call, you can choose to switch between the two callers, or set up a conference
call between all three parties.
1. Tap Answer to take the second call, and put the first one on hold.
2. To end the second call and return to the first call, tap End Call or press END
on your device.
To switch between two calls
During a call, tap
.
To set up a conference call
1. Either put a call on hold, and dial a second number; or, accept a second
incoming call when you already have one in progress.
Tip
To dial a second number, tap
on the screen.
2. Tap
.
Note
Not all mobile phone networks support conference calling. Contact your wireless
service provider for details.
To turn on and off the Speakerphone
During a call, tap
speakerphone icon
to toggle between turning on or off the speakerphone. The
appears in the title bar when the speakerphone is on.
Tip
You can also press and hold TALK/SEND to toggle between turning on or off the
speakerphone.
Warning! To avoid damage to your hearing, do not hold your device against your ear when
the Speakerphone is turned on.
Using Phone Features 5ꢃ
To mute the microphone during a call
Tap to toggle between turning on or off the microphone. When the
microphone is turned off, the mute icon
appears on the screen.
To open Notes while in a call
Tap
or pull out the stylus.
To vibrate the device when the call is established
You can set the device to vibrate once to alert you that the call has been established
with the other party.
1. On the Phone screen, tap Menu > Options >Advanced tab.
2. Select the Vibrate device when connection is established check box and
then tap OK.
End a call
When a call is in progress, tap End Call or press the END button to hang up.
To add a new phone number to Contacts after a call
If the phone number of the person who called is not in Contacts, you can choose to
save the number after you hang up.
1. On the Phone screen, tap Menu > Options > Advanced tab.
2. Select the Add new phone number to Contacts at end of call check box,
then tap OK.
When you enable this option, a pop-up message appears after you end the phone
call and lets you add the phone number to Contacts.
58 Using Phone Features
To check a missed call
You will see the icon in the title bar when you missed a call. To check who the
caller was, do one of the following:
•
•
Tap the title bar, then tap and then tap View.
On the Phone screen, tap Menu > Call History and then tap
.
Call History
Use Call History to check for missed calls, dialed numbers, and calls received. To
open the Call History screen, tap Menu > Call History on the Phone screen.
Speed Dial
Use Speed Dial to call frequently-used numbers with a single tap. For example,
if you assign a contact to the location 2 in Speed Dial, you can tap and hold the
number 2 key on the Phone screen keypad to dial the contact’s number.
To create a Speed Dial entry
1. On the Phone screen, tap Menu > Speed Dial.
2. Tap Menu > New.
3. Tap a contact, then select the phone number of the contact that you want
assigned to the speed dial key.
4. In Location, select an available key to use as the speed dial key.
5. Tap OK.
Tips
•
•
To create a Speed Dial entry from Contacts or SIM card contacts, tap the contact,
select the number you want to add to Speed Dial, then tap Menu > Add to Speed
Dial.
To delete a Speed Dial entry, in the Speed Dial list, tap and hold the desired entry,
then tap Delete.
Using Phone Features 59
Turn the phone function on and off
In many countries, you are required by law to turn off the phone while on board an
aircraft.
To enable or disable the phone function
1. Tap Start > Programs > Comm Manager.
2. On the Comm Manager screen, tap the Phone button to enable or disable
the phone function. When enabled, the ON indicator is activated.
To enable or disable Airplane Mode
Another way to turn off the phone function is to switch your device to Airplane
Mode.
When you enable Airplane Mode, all wireless radios on your device are turned off,
including the phone function, Bluetooth, and Wi-Fi.
When you disable Airplane Mode, the phone function is turned back on and the
previous state of Bluetooth and Wi-Fi are restored.
1. Tap Start > Programs > Comm Manager.
2. On the Comm Manager screen, tap the Airplane Mode button to enable or
disable Airplane Mode. When enabled, the ON indicator is activated.
ꢂ0 Using Phone Features
2.3 Video Call
Your device lets you make video calls when you are within a ꢁG network coverage
area. You need to use a ꢁG-enabled SIM card to make video calls.
Make a video call
Do one of the following:
•
On the Phone keypad, tap the phone number to call, then tap Menu > Video
Call to start a video call.
•
•
From Contacts, tap and hold the desired contact, and tap Video Call.
From Call History, tap and hold the desired phone number or contact, and tap
Video Call.
Note
The other party’s image will appear on the screen about ꢁ to 5 seconds after a
connection is established, depending on the signal strength. The streaming images
quality may also be influenced by the signal.
When the video call is unsuccessful, a message pops up asking you if you want to
try again, make a voice call instead, or send an SMS/MMS message.
Answer a video call
To answer or reject an incoming video call
•
•
•
To answer the video call, tap Answer, or press TALK/SEND on your device.
To reject the video call, tap Ignore, or press END on your device.
To mute the ringing sound without rejecting the call, tap Mute Ring.
When Reject call with text message is enabled in Phone settings, tap Send Text to
reject the call and send the text message to the caller.
Tip
You can also place your phone face down on a table to mute the ring without
rejecting the call.
Using Phone Features ꢂ1
End a video call
Once a video call is in progress, tap End Call to hang up.
Change settings
While on a video call, you can change certain settings such as the size of the image,
brightness of the video image, the camera to use, and more.
The following shows the Video Call screen and control buttons during an ongoing
call.
1
Image display area. Displays your image
and the other party's image, depending
on the selected Swap View setting.
5
4
2
Camera. Tap to toggle between turning
on/off the camera. When the camera is
turned off, the image displayed depends
on the Video Call options you have set.
See “Video call options”for details.
1
2
3
4
5
Main/Second. Tap to toggle between
using the Main (back) and Second (front)
camera.
3
Swap View. Tap to toggle between the ꢀ
view options. You can choose to have the
other party’s image small or large.
Status area. Displays phone number or
contact name and call timer.
ꢂꢀ Using Phone Features
Brightness
To adjust the brightness of the live image,
press NAVIGATION Right to make it brighter or
press NAVIGATION Left to make it less bright.
When you press NAVIGATION Left or Right
during a video call, a brightness bar appears
on the screen.
Notes
•
You can also tap Menu > Brightness to
adjust the brightness of the live image.
•
You cannot adjust the brightness for a
still image.
Brightness bar
Video call options
On the Phone screen, or on the screen of the ongoing video call, you can also tap
Menu > Video Call Options and set the following options:
Video Call Options: General tab
Video Call Options: Services tab
Using Phone Features ꢂꢁ
General tab
•
Show still image. Select the image you want to display when you turn off the
camera.
•
•
•
Preset (female). Displays a female picture in place of your image.
Preset (male). Displays a male picture in place of your image.
Custom image. Lets you use an image file as your display picture. When
this option is selected, the File Name box and the Browse button will be
enabled, allowing you to select an image file.
•
Last video frame. Uses the last video frame before you stopped the
camera as your display image.
•
•
Video screen preference. Change how your image and the other party’s
image are displayed on the screen, select your preference from the Video
screen preference list or tap the View button on the Video Call screen.
Camera options:
•
Flip the 2nd camera video. Select this check box if you are going to show
a text document to the other party using the second camera.
•
Switch camera off when answering video call. Select this check box
to not send a video feed of yourself to the other party when answering
a video call. Instead, the option you selected in Show still image will be
displayed.
•
Switch camera off when making video call. Select this check box to not
send a video feed of yourself to the other party when making a video call.
Instead, the option you selected in Show still image will be displayed.
•
Display info:
•
Show call timer. Select this check box to display the call period in the
status area.
•
Show phone number or name. Select this check box to display the other
party’s phone number or name in the status area.
ꢂ4 Using Phone Features
Services tab
To set up further calling options for Video Call, tap the Services tab. On the Services
screen, select the desired service from the list, then tap Get Settings to access its
settings.
2.4 Smart Dial
Smart Dial makes it easy for you to dial a
phone number.
When you start entering a phone number
or contact name, Smart Dial automatically
searches and sorts the contact entries on
the SIM card, in Contacts, and the phone
numbers in Call History (including incoming,
outgoing, and missed calls). You can then
select the desired number or contact from
the filtered list to dial.
Smart Dial
panel
To find a contact name or number
You can just enter the first letter of the name or number of a contact. Smart Dial will
search for contact phone numbers and the first character of a contact name as well
as from the character that appears after a space, dash, or underscore in a contact
name. For example, if you tap number “ꢀ”on the phone keypad, which is associated
with [a, b, and c] on the Phone keypad, contact names such as the following will
be considered matches: “Ben Miller”, “George Adams”, “John-Carter”, “Carter, Ellen”,
“Dixon, Allan”, “Thomas_Clark”, “JaneCampbell”.
Using Phone Features ꢂ5
If the matching list is long and you want to narrow down the search further, enter
another letter. Using the same example above, if you continue to tap “ꢁ”which is
associated with [d, e, f], the matching list will be narrowed down to the following
names: “Ben Miller”, “George Adams”, “Carter, Ellen”, “Dixon, Allan”.
Make a call or send a text message using Smart Dial
1. On the Home screen, tap Phone.
2. Begin entering the first few numbers or characters.
When you start entering a number or letter, the Smart Dial panel will display
matches found.
Tip
Tap to close the phone keypad and to see if there are more matching contacts.
3. In the Smart Dial panel, flick and slide your finger on the touch screen or
press NAVIGATION Up/Down to browse the list or select a contact.
4. You can do one of the following:
•
•
Tap the contact to call the selected contact.
To send a text message to the selected contact, tap Menu > Send Text
Message.
•
To call a different phone number associated with the selected contact,
select the contact and then press NAVIGATION Left/Right to select the
number to call.
ꢂꢂ Using Phone Features
2.5 Setting Up Bluetooth SIM Access for Car Kit Phones
Bluetooth car kits that support the SIM Access Profile (SAP) can connect to your
device and access its SIM card via Bluetooth. Once a SAP connection has been
established, you can download SIM contacts from your device to the car kit phone.
You can also use the car kit phone to answer and make calls using your device’s SIM
card.
Note
To enable downloading contacts onto the car kit, ensure that all contacts on the
device are stored in the SIM card and not in the device memory. Configure the car kit
to download contacts only from the SIM card.
1. On your device, make sure that Bluetooth is turned on and set to visible
mode. For information about turning on Bluetooth and enabling visible
mode, see “Bluetooth Modes”in Chapter 9.
2. On the Home screen, slide to the Settings tab and then tap Menu >
Bluetooth Devices > SIM Access tab.
3. Select the Remote SIM Access check box, then tap OK.
4. Connect the car kit phone to your device via Bluetooth. To learn how to
connect, consult your car kit phone’s manual.
5. If this is the first time you are pairing the car kit phone with your device, enter
the car kit’s passcode on your device.
6. A pop-up message should appear on your device saying that a connection
has been established between your device and car kit phone. Tap OK.
7. On the Bluetooth screen, tap the SIM Access tab, then tap Connect.
Note
You will not be able to make/receive calls, send/receive messages or perform related
activities on your device when the SIM Access Profile connection is active. You’ll be
able to do all these from the car kit phone during this time. After the connection is
disconnected, you will be able to use your device as before.
Chapter 3
TouchFLO™ 3D
3.1 About TouchFLO™ 3D
3.2 Using the TouchFLO 3D Home Screen
3.3 Finger Gestures
ꢂ8 TouchFLO™ ꢁD
3.1 About TouchFLO™ 3D
TouchFLO™ 3D gives you touch control over your Windows Mobile-powered
device. TouchFLO ꢁD provides the following features:
•
A Home screen that allows finger-touch access to the most widely-used
functions, such as People, Messages, Mail, Music, Internet, and more
•
Allows you to use finger gestures to navigate screens
3.2 Using the TouchFLO 3D Home Screen
The TouchFLO ꢁD Home screen have the following tabs:
Home
People
Messages
Photos and
Programs
Settings
Internet
Videos
Music
Weather
Mail
TouchFLO™ ꢁD ꢂ9
To switch between the tabs of the Home screen
Do one of the following:
•
•
•
Touch or tap the desired tab on the Home screen.
Press NAVIGATION Right or Left to move to the next or previous tab.
Press and hold your finger on the active tab, then slide your finger right or left
over the tabs. Release when you have selected the desired tab.
Note Apply some pressure when pressing and holding on the active tab to be able to
slide over the tabs.
ꢃ0 TouchFLO™ ꢁD
Swipe left across the screen to move to the next tab, and swipe right across
the screen to move to the previous tab.
•
Home
The Home tab displays the current date, a flip-style clock, and an Alarm icon that
indicates whether the alarm is on or off. Missed calls and your upcoming calendar
appointments are also shown on the Home tab.
To select an item on the Home tab
•
Touch the item; or
•
Press NAVIGATION Up or Down first to navigate to the item you want to select
and then press ENTER.
TouchFLO™ ꢁD ꢃ1
Touch the date or the flip
clock to open the Clock &
Alarms screen where you
can set the date, time, and
alarm.
Swipe upward
on the screen to
display the smaller
digital clock
(See Chapter 1ꢁ for details.)
and view more
appointments.
Touch this area to view
details about missed calls
in the Call History.
(See Chapter ꢀ for details.)
Home tab with flip clock
One all-day appointment
and up to two timed
appointments can be
displayed. Touch this area
to create, edit or view an
appointment.
Swipe downward
on the screen to
change back to
the flip clock.
(See “Calendar”in Chapter
1ꢀ for details.)
Home tab with smaller digital clock
ꢃꢀ TouchFLO™ ꢁD
People
On the People tab, you can add favorite contacts who you most frequently
communicate with. This allows you to quickly make calls, send text messages, and
send e-mails to your favorite contacts.
Tip
You can add up to 15 favorite contacts on the People tab.
To add favorite contacts
You should already have created or synchronized contacts on your device before
you can add them to the People tab.
1. On the Home screen, slide your finger to the People tab.
2. Touch the small or big Plus icon, or touch Add Favorite.
3. On the Select a Contact screen, touch the name of the desired contact.
Tips • To create a new contact, touch Menu > New Contact. See “Contacts”in
Chapter 1ꢀ for details.
• SIM contacts cannot be added as favorite contacts.
4. Select a phone number or e-mail address to associate to the favorite contact.
Note If there is no picture associated with the contact, the next screen prompts you to
assign a picture to the contact.
TouchFLO™ ꢁD ꢃꢁ
) at the right
5. To add another favorite contact, touch the small Plus icon (
side of the screen and repeat steps ꢁ and 4.
To choose from your favorite contacts
•
Do any of the following:
To flip through the contact pictures one at a
time, swipe your finger up or down the screen.
You can also press NAVIGATION Up or Down to
flip through the contact pictures.
On the picture strip at the right side of the
People screen:
•
Touch the picture of the desired favorite
contact; or
•
Press and hold on the currently selected
contact picture to display a slide-out bar,
and then slide up or down the picture
strip. Release your finger when the
desired favorite contact is selected.
•
After selecting a favorite contact, touch the icon on the left side of the contact
name. The icon shown will depend on the contact information chosen for the
contact. For example, (
) will be shown if a phone number is selected.
ꢃ4 TouchFLO™ ꢁD
•
Touch the picture of the contact on the center screen to access his or her
contact card. On the contact card, you will see the last outgoing or incoming
call as well as contact details such as phone numbers, e-mail address, and
more.
Tips
•
On the People tab, touch All People to access SIM contacts and all contacts that
are stored on your device.
•
To remove the current favorite contact, touch Menu > Remove Favorite.
Messages
On the Messages tab, you can read SMS text messages as they arrive and create a
new SMS text message. You can also view the text of received MMS messages on
this tab.
When there are new incoming SMS/MMS messages, the icon on the Messages tab
will show the number of new messages. For example,
new message received.
indicates that there is a
Touch this icon to create
a new SMS text message.
To view the entire
message thread from the
sender and reply, touch
the message on the
screen.
To flip through received
SMS/MMS messages,
swipe your finger
upward/downward,
touch the Up/Down
arrow on the screen,
or press NAVIGATION
Up/Down.
Touch All Messages to
access all text messages
in your inbox and other
folders.
Touch Menu to remove
the current message and
access more options.
TouchFLO™ ꢁD ꢃ5
For more information about working with SMS and MMS messages, see “Text
Messages”and “MMS”in Chapter ꢂ.
Mail
The Mail tab is where you send and receive e-mail messages. Including Outlook
E-mail, you can add up to four POPꢁ/IMAP4 and web-based e-mail accounts in this
tab.
To add an e-mail account
1. On the Home screen, slide your finger to the Mail tab.
2. If this is your first time to add an e-mail account, touch New Account on the
bottom-right side of the screen.
3. Set up your e-mail account using the E-mail Setup wizard.
4. To add another e-mail account, touch Menu > Accounts > New Account and
use the E-mail Setup wizard to set up your account.
For detailed instructions on setting up e-mail accounts using the E-mail Setup
wizard, see Chapter ꢂ.
To check e-mail
When there are new e-mails, the icon on the Mail tab and the respective icons of
the e-mail accounts will show the number of newly received messages.
ꢃꢂ TouchFLO™ ꢁD
After selecting an e-mail account,
touch this icon to create and send
a new e-mail message.
• To browse through
received e-mails,
swipe up or down on
the envelope image
or press NAVIGATION
Up/Down.
These are your e-mail
accounts. Touch an
icon to select an e-mail
account and view the
new e-mails received in
that account.
• Touch the e-mail
on the screen to
open and read the
message.
Touch Inbox to access
all e-mail messages of
the currently selected
account.
Touch Menu to access
more options.
For more information about working with e-mails, see Chapter ꢂ and ꢃ.
Internet
On the Internet tab, you can open Opera Mobile™ to browse the web and add web
favorites for one-touch access to your favorite web sites.
Touch here to browse the
Swipe upward or press
web using Opera Mobile.
NAVIGATION Down to
scroll down the screen
and access more web
favorites.
Touch All Bookmarks to
open Opera Mobile and add,
view or delete web favorites.
For more information about using Opera Mobile, see Chapter 8.
TouchFLO™ ꢁD ꢃꢃ
Photos and Videos
The Photos and Videos tab lets you visually flip through your photos and video
clips and view them in full screen. From this tab, you can also activate the Camera
so you can take pictures and record video clips.
The Photos and Videos tab displays pictures and video files from the current
favorite album. By default, the Camera Shots album which stores the pictures and
videos that you captured using the device camera is set as the favorite. You can
change to another favorite album, if preferred.
To set an album as a Favorite
1. On the Photos and Videos tab, touch Album to open the Album program.
2. Touch Albums and then select one of the listed favorite albums.
3. Tap Menu > Set as Favorite. and then tap OK on the confirmation screen.
To view photos and videos
Touch here to take a
photo.
Touch here to shoot
video.
Touch the photo or
To flip through photos and
videos, swipe upward/
downward, touch the
Up/Down arrow, or press
NAVIGATION Up/Down.
video on the screen
to view or play it in
full screen.
Touch here to open
the Album program.
(See “Viewing Photos
and Videos Using
Album”in Chapter 11
for details.)
Touch Slideshow to
view the photos as a
slideshow. If a video is
selected, touch Play.
Tips
•
For more information about viewing in full screen, see “View an image”and “Play
back video”in Chapter 11. The file formats that can be viewed on the Photos and
Videos tab are the same as the Album program.
ꢃ8 TouchFLO™ ꢁD
•
To transfer media files from a computer and view them on the Photos and Videos
tab, copy or synchronize them to a folder under \My Device (the device memory)
or \Storage Card (if a microSD card is installed).
Music
The Music tab allows you to visually browse through albums and music tracks and
play music. The albums and music tracks that you see on the Music tab are from the
Now Playing list of the Library.
Note
Your device searches for all music files that have the following audio formats: AMR-
NB/WB (.awb), MPꢁ (.mpꢁ), WMA (.wma), AAC/AAC+/eAAC+ (.aac), and MPEG-4 (.m4a).
It searches for music from the following locations:
Device: \My Music (including all subfolders)
\My Documents (including all subfolders)
Storage Card: \Storage Card (including all subfolders)
To play music
On the Music tab, flip through albums and all the music in each album, then touch
the Play icon on the middle-right side of the screen to start playback.
Touch here to go to the
previous album or the
previous music in the
current album.
Swipe upward/
downward on the
screen or press
NAVIGATION Up/
Touch here to play or pause.
Down to flip through
You can also press the ENTER
albums and the music
button to play or pause.
or songs in an album.
Touch here to go to the next
album or the next music in
the current album.
Touch Menu to set music
playback to Repeat, turn
Shuffle on or off, and more.
Touch here to
access the Library.
TouchFLO™ ꢁD ꢃ9
To advance forward or backward in the music
Do one of the following:
•
Touch and hold on the thin bar below the album art to display the progress
bar:
Drag your finger right or left on the progress bar to move forward or
backward in the current music.
•
Slide your finger around the Navigation Control as follows:
Slide your finger clockwise to
advance forward in the music.
To move backward in the music,
slide your finger counterclockwise.
To set repeat and shuffle modes
Touch Menu > Repeat and choose whether to repeat once, repeat all, or do not
repeat. To toggle shuffle mode on and off, touch Menu > Shuffle and then select
Shuffle On or Shuffle Off.
The icons on the upper-right side of the Music tab show whether repeat and
shuffle modes are enabled.
Repeat [One]
Repeat [All]
Shuffle [On]
80 TouchFLO™ ꢁD
To browse and play music in the Library
The Library organizes music into categories, such as Now Playing, Artists, Albums,
Genres, All Songs, and more. When you add more albums or music tracks to your
device, go to the Library to locate and play the new albums or music tracks.
1. On the Music tab, touch Library to open the Library screen.
2. The tabs at the bottom of the Library screen correspond to the different
categories. To browse music under a certain category, slide to the tab that
corresponds to the desired category.
3. Tap a music track to play it.
Note
When you select a category in the Library such as Artists and play its music, the Now
Playing list will be replaced with the music tracks from that category.
To use playlists
You can group your favorite music into a playlist and then play back the playlist.
•
To create a new playlist:
1. Select the desired music on the Music tab or the Library.
2. Touch Menu > Add to Playlist.
3. Touch <New Playlist>, enter a Playlist name and then touch OK.
To add more music files to a playlist:
•
1. On the Playlists tab, touch a playlist to open it.
2. Touch Menu > Edit.
3. Touch Menu > Add.
4. Select the check boxes of the music you want to add to the playlist, or
touch Menu > Select All to choose all the music.
5. Touch OK three times and then touch Up to return to the Playlists tab.
To play back a playlist:
•
1. On the Playlists tab, touch a playlist to open it.
TouchFLO™ ꢁD 81
2. Touch the first song in the playlist. The Music tab starts playing the first
song. After each song, the next one in the playlist will be played.
Note Playlists are not automatically updated when music files have been deleted from
the device memory or storage card.
There are two types of playlists that can be shown on the Playlists tab:
•
•
Custom playlists. Playlists that are created on the Music tab.
Windows Media® Player playlists. Playlists that are in Windows Media®
Player Mobile’s Library (which is synchronized with Windows Media® Player
on your computer). They are indicated by the Windows Media® Player icon
(
). These playlists cannot be edited.
Custom playlists
Windows Media®
Player playlists
Note
If a Windows Media® Player playlist contains a combination of music, video and image
files, only music files in the playlist will be synchronized to your device and other
media types will be filtered out.
8ꢀ TouchFLO™ ꢁD
Weather
The Weather tab shows you the current weather as well as weather information for
the next five days of the week.
To add a city
The Weather tab can display weather information of your local city and other
added cities. Follow the steps below to add a city on this tab.
Tip
You can add up to 10 cities on the Weather tab.
1. On the Weather tab, touch Menu > Add Location.
2. The Select Country screen then appears. Flick your finger on the screen or use
the Quick Scroll bar on the right of the screen to choose the country. You can
also slowly scroll through the country list by dragging your finger upward on
the screen. Touch the desired country to select it.
3. The Select City screen then appears. Flick your finger on the screen or use
the Quick Scroll bar on the right of the screen to choose the city. You can
also slowly scroll through the city list by dragging your finger upward on the
screen. Touch the desired city to select it.
To view weather information
Your device automatically connects to the Internet via the ꢁG/GPRS/EDGE data
connection or Wi-Fi to download and display weather information. The current
temperature, temperature range, type of weather (sunny, cloudy, showers, or
others), and the time of day (daytime or nighttime) are shown on the Weather tab.
To see the weather information for the next five days of the week, touch 5-day at
the bottom-left side of the screen.
TouchFLO™ ꢁD 8ꢁ
Shows the last weather
update. Touch this item
to download the latest
weather information.
To switch between
cities, swipe your finger
upward/downward, touch
the Up/Down arrow
on the screen, or press
NAVIGATION Up/Down.
Touch to see the
weather information
for the next five days
of the week.
Touch Menu to add or
delete a city, change the
temperature to Celsius or
Fahrenheit, and more.
To choose download options
1. On the Weather tab, touch Menu > Settings.
Tip
You can also slide to the Settings tab and then touch Data.
2. You can choose from the following options:
•
Download weather automatically. When this option is selected, weather
information is automatically downloaded from the AccuWeather web site
whenever you select the Weather tab, if the data has not been updated
within the last three hours. Weather data is also downloaded every time
an ActiveSync connection is established (through over-the-air or USB
connections).
Clear this option if you prefer to manually download weather information.
•
Download weather when roaming. Select this option only if you want to
allow automatic download of weather data when roaming. This may incur
additional costs.
84 TouchFLO™ ꢁD
Settings
The Settings tab allows you to synchronize
information with your computer or the Exchange
Server, change sound settings such as the ring
tone, and choose a different wallpaper for the
Home tab. You can also easily turn on and off the
communications features of your device such as Wi-Fi,
Bluetooth, and more.
Programs
The Programs tab allows you to add your favorite programs for one-touch access.
Touch a program
icon to open the
corresponding
program.
Touch an empty
slot to add a
favorite program.
Touch Remove to
Touch All Programs
to access all the
programs of your
device.
choose which program
to remove from the
Programs tab.
TouchFLO™ ꢁD 85
When you have filled up the screen with programs, scroll down the Programs tab
to access more empty slots and add more programs. To scroll down, press and hold
on the screen and then drag your finger upward. You can add up to 18 favorite
programs.
To scroll back up, press and hold on the screen and then drag your finger
downward.
Note
To replace a slot with another program, you must delete the occupying program
shortcut first and then add your desired program.
3.3 Finger Gestures
You can use finger gestures to scroll, zoom and pan on the touch screen.
Finger scrolling
Finger scrolling can be used to scroll up and down web pages, documents, and lists
such as the contacts list, file list, message list, calendar appointments list, and more.
When finger
scrolling, swipe or
flick your finger on
the touch screen.
To scroll up and down
•
To scroll down, swipe your finger upward on the touch screen.
To scroll up, swipe your finger downward on the touch screen.
8ꢂ TouchFLO™ ꢁD
To auto-scroll, flick your finger upward or downward on the touch screen.
Touch the screen to stop scrolling.
To scroll left and right
•
•
To scroll towards the right, swipe your finger to the left.
To scroll towards the left, swipe your finger to the right.
•
To auto-scroll, flick your finger left or right. Touch the screen to stop scrolling.
Finger zooming
The type of finger gesture to use when zooming varies in different programs.
•
To zoom in on a web page in Opera Mobile, tap your finger twice on the
screen. See “Using Opera Mobile”in Chapter 8 for details.
•
To zoom in on a photo in Album, make a full-circle swipe on the touch screen.
See “Viewing Photos and Videos Using Album”in Chapter 11 for details.
Finger panning
You can use finger panning to move to and view other
parts of a zoomed photo, web page, document, or an
e-mail. To pan, touch and hold on the touch screen
and then drag your finger in any direction.
Tip
To enable or mute finger scrolling and panning
sound, touch Start > Settings > System tab >
TouchFLO, and then select or clear the Enable
sound when finger scrolling and panning check
box.
Chapter 4
Entering Text
4.1 Entering Information
4.2 Using the Hardware Keyboard
4.3 Using the Full QWERTY
4.4 Using the Compact QWERTY
4.5 Using the Phone Keypad
4.6 Using Multitap and T9 Modes
4.7 Using Numeric and Symbol Mode
4.8 Using Block Recognizer
4.9 Using Letter Recognizer
4.10 Using Transcriber
88 Entering Text
4.1 Entering Information
When you start a program or select a field that requires text or numbers, you can
either use the QWERTY keyboard or one of the on-screen input methods to enter
information.
QWERTY keyboard
Your device comes with a QWERTY keyboard,
which is similar to a standard keyboard on your
PC.
To use the keyboard, slide the screen panel
to the right to reveal the keyboard. The
screen orientation automatically switches to
landscape mode when the keyboard is opened.
On-screen input methods
When you start a program or select a field that requires text or numbers, the Input
Panel icon becomes available on the menu bar.
Tap the Input Selector arrow (that appears next to the Input Panel icon) to open a
menu where you can select a text input method and customize input options. After
selecting a text input method, the corresponding Input Panel is displayed, which
you can use to enter text.
Tip
Select Other Input Methods to display more input methods.
To show or hide the Input Panel, tap the Input Panel icon.
Entering Text 89
Key when
pressed
Input Panel
(Full QWERTY)
Input Panel icon
Input Selector
arrow
Text input methods
Icon
Input method
Icon
Input method
Letter Recognizer or
Block Recognizer
Full QWERTY
Compact QWERTY
Phone Keypad
Transcriber
Keyboard
Notes
•
•
Some text input methods may not be available in certain language versions of the
device.
When in landscape mode, the Compact QWERTY and Phone Keypad are not
available.
90 Entering Text
4.2 Using the Hardware Keyboard
You can do the following with the hardware keyboard:
•
To type lowercase letters and numbers, press the keys using your thumbs or
fingers.
•
To use all uppercase letters, press
press again.
. To change back to all lowercase letters,
•
•
To use a single uppercase letter, press
corresponding key.
and then press the
To enter the symbol or punctuation mark, or launch the program that
is printed at the upper right corner of a key, press
corresponding key.
, then press the
•
•
•
To open the Symbol Pad, press
Press to insert a hard return while typing.
Press the arrow keys for directional movement.
.
/
/
/
Entering Text 91
•
•
•
Press
Press
to open the Messaging program.
to open your SMS/MMS messaging account.
Press and hold
, then press
to open the T9 menu.
4.3 Using the Full QWERTY
The Full QWERTY is a full on-screen QWERTY keyboard layout similar to a desktop
PC keyboard.
Tip
You can also use the Windows Mobile on-screen keyboard which also has a QWERTY
keyboard layout by selecting Keyboard (or Other Input Methods > Keyboard) on
the Text input method menu.
• Tap to enter letters
or symbols.
Displays the word
• Tap and hold
candidate list in T9
to enter a
mode. Tap a word
punctuation mark,
to insert it into your
symbol, or number
text. Tap
a word to the T9
dictionary.
to add
that appears on
top of a key.
Tap to delete the
previous character.
Tap to create a
new line.
• Tap to enter an
uppercase letter.
• Tap twice to turn
on Caps Lock.
Tap to open a keyboard layout
that lets you easily enter numbers
and symbols. See “Using Numeric
and Symbol Mode”for details.
Tap to toggle between using Normal
or T9 mode.
9ꢀ Entering Text
To enter text using the Full QWERTY
1. Start a program that accepts text input, such as Word Mobile.
2. Tap the Input Selector arrow, then tap Full QWERTY.
3. Start tapping keys on the keyboard as you would on a PC keyboard to enter
your text. To learn how to enter text using T9 mode, see “Using Multitap and
T9 Modes”in this chapter.
4.4 Using the Compact QWERTY
The Compact QWERTY is a type of on-screen keyboard which features ꢀ0 keys.
With its large, touch-friendly keys and enhanced features such as T9 predictive
input, you can enter text faster and more accurately.
• Tap to enter letters
or symbols.
Displays the word
candidate list in T9
mode. Tap a word
to insert it into your
• Tap and hold
to enter a
punctuation mark,
symbol, or number
that appears on
top of a key
text. Tap
to add
a word to the T9
dictionary.
Tap to delete the
previous character.
Tap to create a
new line.
• Tap to enter an
uppercase letter.
• Tap twice to turn
on Caps Lock.
Tap to open a keyboard layout
that lets you easily enter numbers
and symbols. See “Using Numeric
and Symbol Mode”for details.
Tap to toggle between using
Multitap or T9 mode.
Entering Text 9ꢁ
Tip
You can tap and hold
to immediately open the numeric keyboard.
To enter text using the Compact QWERTY
1. Start a program that accepts text input, such as Word Mobile.
2. Tap the Input Selector arrow, then tap Compact QWERTY.
3. Start tapping keys on the keyboard to enter your text. To learn how to enter
text using Multitap or T9 mode, see “Using Multitap and T9 Modes”in this
chapter.
4.5 Using the Phone Keypad
The Phone Keypad is a 1ꢀ-key on-screen keypad that has a layout similar to mobile
phone keypads, plus some additional keys. The Phone Keypad has large keys and
enhanced input features such as T9 predictive input, which makes it faster for you
to enter text in your messages and documents.
Displays the word
candidate list in T9 mode.
Tap a word to insert it
into your text. Tap
to add a word to the T9
dictionary.
• Tap to enter letters
or symbols.
• Tap and hold
to enter a
punctuation mark,
symbol, or number
that appears on
top of a key
Tap to open the input
settings.
• Tap to enter an
uppercase letter.
• Tap twice to turn
on Caps Lock.
Tap to delete the previous
character.
Tap to create a new line.
Tap to open a keyboard layout that lets
you easily enter numbers and symbols.
See “Using Numeric and Symbol Mode”
for details.
Tap to toggle between using Multitap
or T9 mode.
94 Entering Text
Tip
You can tap and hold
to immediately open the numeric keyboard.
To enter text using the Phone Keypad
1. Start a program that accepts text input, such as Word Mobile.
2. Tap the Input Selector arrow, then tap Phone Keypad.
3. Start tapping keys on the keyboard to enter your text. To learn how to enter
text using Multitap or T9 mode, see “Using Multitap and T9 Modes”in this
chapter.
4.6 Using Multitap and T9 Modes
When using the on-screen keyboards, you can choose to enter text using Multitap
or T9 mode.
Multitap mode
In Multitap mode (for Compact QWERTY and Phone Keypad), enter a character by
tapping a key until the desired character is displayed on the screen.
•
To enter the first letter that shows on a key, tap the key once. To enter the
second letter, tap twice.
•
To enter a punctuation mark, symbol, or number that appears on top of a key,
tap and hold the key.
T9 mode
T9 is a predictive text input mode which displays a word candidate list as you enter
the first few characters so you just select the word that you want.
To enter text using T9 mode
1. Start entering the first few letters of a word. As you enter each letter,
predicted words will appear above the keyboard.
2. Tap the desired word to immediately insert it to your text.
Entering Text 95
Note Navigate through the word candidate list if there are more words to choose from.
To add a word to the T9 dictionary
If the word that you have entered is not found in the dictionary, you can add it to
the dictionary.
1. While in T9 mode, type a letter and then tap
on right side of the word
candidate list.
2. Type the word you want to add and then tap ADD.
Tap to not add the word.
To customize Touch Input settings
1. Tap the Input Selector arrow, then tap Touch Input Settings.
2. On the Touch Input Settings screen, select or clear the following options
according to your preferences:
•
•
•
•
Spell Correction. Lets you correct typographical errors by selecting from
a list of possible words that reflect the characters of the keys you have
tapped as well as characters of nearby keys.
Word Completion in T9 mode. Lets you select from a list of possible
words based on the keys that you have tapped and on the words available
in the dictionary.
Word Completion in ABC mode. Lets you select from a list of possible
combinations based on the characters that appear on the keys that you
tapped.
Auto-Substitution. Automatically inserts an apostrophe when you type
common contracted words (for example, “dont”automatically becomes
“don’t”).
3. Tap Done.
9ꢂ Entering Text
4.7 Using Numeric and Symbol Mode
Switch to Numeric and Symbol mode to let you easily enter numbers and common
symbols such as parentheses, braces, currency signs, punctuation marks, special
characters, and more. Numeric and Symbol mode is available when using the Full
QWERTY, Compact QWERTY, and Phone Keypad.
Tap a number or symbol
to insert it into your text.
Tap to go to the previous
or next page of symbols.
See “To lock the keyboard in
Numeric and Symbol mode.”
Tap to switch to the
numeric keyboard
Tap to switch back to the
letter keyboard layout.
Compact QWERTY and
Phone Keypad
Full QWERTY
To switch to Numeric and Symbol mode
1. While using Full QWERTY, Compact QWERTY, or Phone Keypad, tap
/
.
2. Locate the number or symbol, then tap it to insert it into your text.
To lock the keyboard in Numeric and Symbol mode
You can lock the keyboard in Numeric and Symbol mode so you can continuously
enter symbols and numbers.
1. Tap the Input Selector arrow and then tap Other Input Methods > Options.
2. In the Input Method tab, select a Touch input method in the Input method
list, then tap Options.
3. Clear the Turn on one-touch symbol entry check box.
Entering Text 9ꢃ
Tip
In Compact QWERTY and Phone Keypad, tap
the keyboard in Numeric and Symbol mode and switching back to the letter keyboard
layout after tapping a symbol or number.
/
to toggle between locking
4.8 Using Block Recognizer
With Block Recognizer, you use a single stroke to write letters, numbers, symbols,
and punctuation, which are then converted into typed text.
To use Block Recognizer
1. From a program, tap the Input Selector arrow and then tap Other Input
Methods > Block Recognizer.
2. Write characters, numbers, and symbols in the designated writing area.
•
•
•
Enter letters by writing in the abc (left) area of the box.
Enter numbers by writing in the 123 (right) area of the box.
Enter symbols and punctuation by tapping the left or right area of the box
(a gray dot appears), then writing the desired character.
Tip
For help with writing characters, tap the question mark near the writing area.
98 Entering Text
4.9 Using Letter Recognizer
With Letter Recognizer, you can write individual letters, numbers, and punctuation
marks, which are then converted into typed text.
To use Letter Recognizer
1. From a program, tap the Input Selector arrow and then tap Other Input
Methods > Letter Recognizer.
2. Write characters, numbers, and symbols in the designated writing area.
•
•
•
•
Enter uppercase letters by writing in the ABC (left) area of the box.
Enter lowercase letters by writing in the abc (middle) area of the box.
Enter numbers by writing in the 123 (right) area of the box.
Enter punctuation and symbols by writing the desired character in the
123 (right) area of the box.
Tip
For help with writing characters, tap the question mark near the writing area.
4.10 Using Transcriber
Transcriber is a handwriting recognition program that enables you to write in
cursive, print, or a combination of both.
To write using Transcriber
1. Open a program that accepts user input, such as Word Mobile.
2. Tap the Input Selector arrow and then tap Other Input Methods >
Transcriber. The Transcriber introductory screen appears. Read the
introduction and tap OK.
3. Position the cursor where you want text to appear.
4. Use the stylus to write anywhere on the screen. The handwriting will be
converted to text shortly after you lift the stylus from the screen.
Entering Text 99
To enter punctuation and symbols
Transcriber comes with an on-screen keyboard that provides an easy way to add
punctuation or a special symbol to existing text. To use this on-screen keyboard, tap
on the Transcriber toolbar.
The keyboard remains visible until you tap the button again.
Tips
•
To reposition the keyboard, tap and hold the title bar, then drag to the desired
location.
•
When no text is selected, you can open the keyboard by using the gesture (draw
a line straight down and then straight up). For more information about using
Transcriber gestures, see Help on your device.
To edit text
1. In a program, draw a line from left to right across the text you want to edit.
2. After you lift the stylus from the screen, the line disappears and the selected
text will be highlighted.
3. Do either of the following:
•
•
Rewrite the text.
Use gestures to capitalize letters, insert a space, and so on. For information
about using Transcriber gestures, see Help on your device.
100 Entering Text
Chapter 5
Synchronizing Information
With Your Computer
5.1 About Synchronization
5.2 Setting Up Windows Mobile® Device Center on
Windows Vista®
5.3 Setting Up ActiveSync® on Windows® XP
5.4 Synchronizing With Your Computer
5.5 Synchronizing via Bluetooth
5.6 Synchronizing Music and Video
10ꢀ Synchronizing Information With Your Computer
5.1 About Synchronization
You can take information from your computer wherever you go by synchronizing
them to your device. The following types of information can be synchronized
between your computer and your device:
•
Microsoft® Office Outlook® information, which include Office Outlook e-
mail, contacts, calendar, tasks, and notes
•
•
•
•
Notes, which are created using Microsoft® Office OneNote® 2007
Media, such as pictures, music, and video
Favorites, which are the bookmarked links to your favorite web sites
Files, such as documents and other files
Before you can synchronize, you need to install and set up first the synchronization
software on your computer. For more information, see “Setting Up Windows Mobile
Device Center on Windows Vista®”and “Setting Up ActiveSync® on Windows® XP”in
this chapter.
Note
ActiveSync or Windows Mobile Device Center only synchronizes data on your
computer and device. If you have installed a storage card and you want to back up
files from the storage card, use Windows Explorer on your computer to copy files from
the storage card to your computer.
Ways to synchronize
After you have installed the synchronization software on your computer, connect
and synchronize your device with your computer by:
•
Using the supplied USB sync cable.
Upon connecting the sync cable to your device and your computer, the
synchronization process automatically starts.
Synchronizing Information With Your Computer 10ꢁ
•
Using Bluetooth.
You must first set up a Bluetooth partnership between your device and your
computer before you can synchronize information between them using
Bluetooth. For more information about setting up a Bluetooth partnership,
see Chapter 9. For information about synchronizing through Bluetooth, see
“Synchronizing via Bluetooth”later in this chapter.
Try to synchronize regularly in order to keep information up-to-date in both your
device and your computer.
Notes
•
You can also synchronize Outlook e-mail, contacts, calendar, and tasks on your
device with the Exchange Server at your work. For more information about setting
up your device to synchronize with the Exchange Server, see Chapter ꢃ.
•
If you are sending your device for repair or performing a hard reset, data from your
device will be lost. It is recommended that you sync your device to your computer
to back up your files. To back up files from the storage card to your computer, use
Windows Explorer to copy files from the storage card to the computer.
5.2 Setting Up Windows Mobile® Device Center on
Windows Vista®
Microsoft Windows Mobile® Device Center is the replacement for Microsoft®
ActiveSync® on Windows Vista®.
Note
Some versions of Windows Vista® come with Windows Mobile Device Center already
installed. If Windows Mobile Device Center is not available on your Windows Vista®,
you can install it from the Getting Started Disc that came with your device.
104 Synchronizing Information With Your Computer
Set up synchronization in Windows Mobile Device Center
When you connect your device to your computer and start Windows Mobile Device
Center for the first time, you are asked to create a Windows Mobile partnership with
your device. To create a partnership:
1. Connect your device to your computer. Windows Mobile Device Center
configures itself, then opens.
2. On the license agreement screen, click Accept.
3. On the Windows Mobile
Device Center’s Home
screen, click Set up your
device.
Note Choose Connect
without setting up
your device if you only
want to transfer media
files, check for updates,
and explore your device
but not synchronize
Outlook information.
4. Select the items you want to synchronize, then click Next.
5. Enter a device name, then click Set Up.
When you finish the setup wizard, Windows Mobile Device Center synchronizes
your device automatically. Notice that Outlook e-mails and other information
appear on your device after synchronization.
Synchronizing Information With Your Computer 105
Use Windows Mobile Device Center
To open Windows Mobile Device Center, click Start > All Programs > Windows
Mobile Device Center on your Windows Vista computer.
On Windows Mobile Device Center, you can do the following:
•
•
Click Mobile Device Settings to change synchronization settings.
When you click Pictures, Music and Video > XX new pictures/video clips
are available for import, a wizard guides you to tag and transfer photos
from your device to the Photo Gallery on your computer.
•
Click Pictures, Music and Video > Add media to your device from
Windows Media Player to synchronize music and video files using Windows
Media® Player. For more information, see “Using Windows Media® Player
Mobile”in Chapter 11.
•
Click File Management > Browse the contents of your device to view
documents and files on your device.
Note
See Windows Mobile Device Center Help for more information.
10ꢂ Synchronizing Information With Your Computer
5.3 Setting Up ActiveSync® on Windows® XP
The Getting Started disc that comes with your device contains Microsoft ActiveSync
4.5 or later. Follow the steps in this section to install and set up ActiveSync on
Windows XP or other compatible Windows systems.
Note
For a list of compatible Windows systems, go to
http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx.
Install ActiveSync
1. Place the Getting Started disc to the disc drive of your computer.
2. Click Setup and Installation.
3. Select the ActiveSync check box, then click Install.
4. Read the license terms, then click Accept.
5. When installation is completed, click Done.
6. On the Getting Started with Windows Mobile screen, click Close.
Set up synchronization in ActiveSync
1. Connect your device to your computer. The Synchronization Setup Wizard
automatically starts and guides you to create a synchronization partnership.
Click Next to proceed.
2. To synchronize your device with your computer, clear the Synchronize
directly with a server running Microsoft Exchange check box, then click
Next.
3. Select the information types that you want to synchronize, then click Next.
4. Select or clear the Allow wireless data connections check box according to
your preference.
5. Click Finish.
Synchronizing Information With Your Computer 10ꢃ
When you finish the wizard, ActiveSync synchronizes your device automatically.
Notice that Outlook e-mails and other information appear on your device after
synchronization.
5.4 Synchronizing With Your Computer
Connect and synchronize your device with your computer using the USB cable or
Bluetooth connection.
Start and stop synchronization
You can manually synchronize either from your device or computer.
From your device
•
On the TouchFLO ꢁD Home screen, slide to the Settings tab and then touch
Sync Data; or
•
Tap Start > Programs > ActiveSync, then tap Sync. To end synchronization
before it completes, tap Stop.
Tip
To delete a partnership with one computer completely, disconnect your device
from that computer first. In ActiveSync on your device, tap Menu > Options, tap the
computer name, then tap Delete.
From Windows Mobile Device Center
1. Click Start > All Programs > Windows Mobile Device Center.
2. Click
To end synchronization before it completes, click
From ActiveSync on your computer
at the lower left of the Windows Mobile Device Center.
.
When you connect your device to your computer, ActiveSync automatically opens
on your computer and synchronizes.
•
•
To manually start synchronization, click
.
To end synchronization before it completes, click
.
108 Synchronizing Information With Your Computer
Change which information is synchronized
You can change the information types and the amount of information to
synchronize for each type either on your device or your computer. Follow the steps
below to change synchronization settings on your device.
Note
Before changing synchronization settings on your device, disconnect it from your
computer.
1. In ActiveSync on your device, tap Menu > Options.
2. Select the check box for any items you want to synchronize. If you cannot
select a check box, you might have to clear the check box for the same
information type elsewhere in the list.
3. To change synchronization settings for an information type, for instance, E-
mail, select it and tap Settings.
You can then set the download size limit, specify the time period of
information to download, and more.
Notes
•
Some information types such as Favorites, Files and Media cannot be selected in
ActiveSync Options on your device. You can only select or clear these items from
your computer’s Windows Mobile Device Center or ActiveSync.
•
A computer can have sync partnerships with many different Windows Mobile
powered devices, but a device can have sync partnerships with at most two
computers. To ensure that your device will synchronize properly with both
computers, set up the second computer using the same synchronization settings
you used on the first computer.
•
Outlook e-mail can be synchronized with only one computer.
Troubleshoot sync connection problem
In some cases, when the computer connects to the Internet or a local network, it
may disconnect the connection with your device in favor of the Internet or network
connection.
Synchronizing Information With Your Computer 109
If this happens, tap Start > Settings > Connections tab > USB to PC, then clear the
Enable advanced network functionality check box. This makes your computer
utilize a serial USB connection with your device.
5.5 Synchronizing via Bluetooth
You can connect and synchronize your device with the computer using Bluetooth.
Note
To connect and synchronize your device with a computer via Bluetooth, your
computer must have a built-in Bluetooth or installed with a Bluetooth adapter or
dongle.
To synchronize with a computer via Bluetooth
1. Set up Windows Mobile Device Center or ActiveSync on your computer to
synchronize through Bluetooth. See the program’s Help for instructions.
2. On your device, tap Start > Programs > ActiveSync.
3. Make sure that Bluetooth on both your device and the computer are turned
on and set to visible mode. See “Bluetooth Modes”in Chapter 9 for details.
If this is the first time you have connected to this computer via Bluetooth,
you must first complete the Bluetooth wizard on your device and set
up a Bluetooth partnership between your device and the computer. For
more information about creating a Bluetooth partnership, see “Bluetooth
Partnerships”in Chapter 9.
4. Tap Menu > Connect via Bluetooth. Make sure the Bluetooth function of
both your device and the computer are turned on and set to visible mode.
Note
To conserve battery power, turn off Bluetooth when not in use.
110 Synchronizing Information With Your Computer
5.6 Synchronizing Music and Video
If you want to carry your music or other digital media along with you while you
travel, set up Windows Media® Player on your computer to synchronize music and
video with your device.
Other than selecting the Media information type to be synchronized, all media
synchronization settings must be set in Windows Media® Player. Before media can
be synchronized, you must do the following:
•
Install Windows Media® Player Version 11 on your computer. (Windows
Media® Player 11 works only in Windows XP or later versions).
•
Connect your device to the computer with a USB cable. If your device is
currently connected using Bluetooth, you must end that connection before
media can be synchronized.
•
Set up a sync partnership between your device and your computer’s Windows
Media® Player.
For more information about using Windows Media® Player Mobile, see Chapter 11.
Chapter 6
Exchanging Messages
6.1 Messaging
6.2 Text Messages
6.3 MMS
6.4 Types of E-mail Accounts
6.5 E-mail Setup Wizard
6.6 Using E-mail
11ꢀ Exchanging Messages
6.1 Messaging
Messaging is a central location where you will find all types of messaging accounts,
which include text messages (SMS), multimedia messages (MMS), and e-mail
accounts.
To select a messaging account
Do one of the following:
•
•
On the TouchFLO ꢁD Home screen, slide to the
Mail tab and then touch Menu > Accounts >
Accounts. The Account Picker screen then opens
where you can select an account.
Tip
You can also tap Start > Messaging to access
the Account Picker screen.
While you are in a message list of a certain
account, for example SMS \ MMS, tap Menu >
Go To to switch to other types of messaging
accounts.
Account Picker screen
To configure message account settings
•
Tap Menu > Options on the Account Picker screen; or
•
Tap Menu > Tools > Options while you’re in a message list.
To automatically add a signature in outgoing messages
You can automatically add your name and other information as your signature in
outgoing SMS, MMS, and e-mail messages:
Note
You need to specify your signature for each type of messaging account.
1. Tap Start > Messaging, then tap Menu > Options.
2. Tap Signatures.
Exchanging Messages 11ꢁ
3. Select a messaging account in which to add a signature.
4. Select the Use signature with this account check box.
5. In the provided text box, enter the information that will be displayed as your
signature.
6. If you want the signature to be added whenever you reply or forward
messages, select the Use when replying and forwarding check box, then
tap OK.
7. Repeat the steps to add a signature to other messaging accounts.
6.2 Text Messages
Send short text messages (SMS) up to 1ꢂ0 characters long to other mobile phones.
Create a new text message
Depending on your preference, there are a number of alternative ways you can
create a new text message.
From the TouchFLO 3D Home screen
1. On the Home screen, slide to the Messages tab.
2. Touch the New Message icon (
) on the upper right side of the screen.
Tip
To send a text message to a favorite contact, first select the photo of the desired
contact in the People tab to open his or her contact card and then touch Send text
message. For more information about working with favorite contacts, see “People”in
Chapter ꢁ.
From the Account Picker screen
1. Tap Start > Messaging > SMS \ MMS.
2. Tap Menu > New > SMS.
114 Exchanging Messages
From the Contacts screen
1. Tap Start > Contacts.
2. Tap the contact’s name to open his or her contact card.
3. Touch Send text message.
Compose and send a text message
After creating a new text message, follow the steps below to enter your message
and then send it.
1. To add recipients, enter their mobile phone numbers in the To field, separating
them with a semicolon. You can also tap To or tap Menu > Add Recipient to
add mobile phone numbers from Contacts.
2. Enter your message.
Tip
To choose from preset messages, tap Menu > My Text and tap a desired
message. To check the spelling, tap Menu > Spell Check.
3. Tap Send.
Tips
•
For more information about entering text and symbols, see Chapter 4.
•
If you want to know when a text message is received, before sending the message
that you are composing, tap Menu > Message Options, then select the Request
message delivery notification check box.
•
To always receive a delivery notification, tap Menu > Tools > Options in the text
message list, tap SMS \ MMS, then select the Request delivery notifications
check box.
Manage text messages
Text messages that are sent to and received from a contact (or number) are
grouped as a single thread in your inbox. Threaded SMS lets you see exchanged
messages (similar to a chat program) with a contact on the screen.
Exchanging Messages 115
To reply to a text message
1. In the SMS \ MMS inbox, tap a message thread to open it.
2. At the bottom of the screen, type your reply message and then tap Send.
Enter your reply
message here
To copy a message in the thread to the SIM card
1. In the SMS \ MMS inbox, tap the message to open it.
2. Use the Navigation Up or Down control to select a message in the thread that
you want to copy to the SIM card.
Note You cannot copy a sent message from the thread to the SIM card.
3. Tap Menu > Copy to SIM.
11ꢂ Exchanging Messages
To copy a text message from the SIM card to the device
1. In the SMS \ MMS inbox, select the SIM message you want to copy.
2. Tap Menu > Copy to Phone.
Note
Copying SIM text messages to your device results in duplicate messages in the Inbox
folder when your SIM card is in use.
To delete a message in the thread
1. In the SMS \ MMS inbox, tap a message thread to open it.
2. Use the Navigation Up or Down control to select a message in the thread that
you want to delete.
3. Tap Menu > Delete.
To delete all messages in a thread
1. In the SMS \ MMS inbox, select a message thread using the Navigation Up or
Down control.
2. Tap Delete.
To reply to a text message with an MMS message
You can reply to a text message in a thread or to a SIM text message using an MMS
message.
1. In the SMS \ MMS inbox, tap a message thread to open it.
2. Tap Menu > Insert, and then in the menu, select the item you want to insert:
Picture/Video, Audio or Attachment.
Tip
Tap Menu > Advanced Composer after adding a picture/video, audio, or
attachment to compose an MMS message complete with text, emoticons, media
and attachments.
3. Tap Send.
Tip
You can also insert a vCard or vCalendar in your MMS message.
Exchanging Messages 11ꢃ
6.3 MMS
Sending multimedia messages (MMS) to your friends and family is fun and easy. You
can include pictures, videos, and audio clips in a multimedia message.
Notes
•
Multimedia messaging is a charged service and has to be provisioned on your
mobile phone account. Contact your wireless service provider to have MMS
provisioned as part of your calling plan.
•
Make sure the size of MMS messages that you send is within the limits allowed by
your wireless service provider.
Change MMS settings
Check your device to see if it is preconfigured with your wireless service provider’s
MMS settings. Add the MMS settings of your wireless service provider if there are no
preset MMS settings found on your device.
To configure MMS message settings
1. Tap Start > Messaging > SMS \ MMS.
2. Tap Menu > MMS Options. The Settings screen then appears.
3. In the Preferences tab, choose from the available options according to your
needs.
4. Tap the Servers tab and check if
your device is preset with MMS
server settings.
If there are no preset settings,
tap New and enter the following
information, which you obtained
from your wireless service
provider:
118 Exchanging Messages
•
•
•
•
•
•
Gateway. Location of the MMS server, which is usually in the form of an IP
address.
Port number. HTTP port number used for connecting to the MMS server
and for file transfer.
Server address. URL address of the server where MMS messages are
stored.
Connect via. Select the connection that your device uses for MMS
messages.
Send limit. Select the maximum MMS message size allowed by your
wireless service provider.
WAP version. Select either WAP 1.2 or WAP 2.0, depending on which
one is being used by your wireless service provider.
5. Tap Done.
Notes
•
If your device already has preset MMS settings, it is recommended that you do not
change these settings. If you change the preset settings, your device may not be
able to send and receive MMS messages.
•
If you add several MMS message service providers to the Settings screen, you can
choose one as your default provider. Select the provider's name in the list, then tap
Set As Default.
Create and send MMS messages
You can compose MMS messages in a combination of slides, where each slide can
consist of a photo, video or audio clip, and/or text.
To compose an MMS message
1. Tap Start > Messaging > SMS \ MMS, then tap Menu > New > MMS.
2. When you see the Choose a MMS screen, tap a preset template, or tap
Custom to open a blank MMS message.
Note If you prefer to start composing from a blank MMS message every time, select
the Always choose custom check box.
Exchanging Messages 119
3. In To, enter the recipient’s phone number or e-mail address directly, or tap To,
Cc, or Bcc to choose a phone number or an e-mail address from Contacts.
Note You may need to scroll up to see Cc and Bcc.
4. Enter a subject for your message.
5. Tap the Insert icon (
)to select and insert a photo or video clip. When
selecting a photo or video clip, you can:
•
•
Tap Select to insert the selected photo or video clip into the MMS
message you are composing.
Tap
Tap
to take a photo and insert it into the MMS message.
•
•
to record MMS video and insert it into the MMS message.
Tap Exit (
) to quit selection and return to the MMS message.
6. Enter text and insert audio clips by tapping the respective areas. See “To add
text to an MMS message”and “To add an audio clip to an MMS message”for
details.
7. To add more slides, tap or tap Menu > Slides > Insert Slide. Repeat steps
5 and ꢂ to insert photos/videos, text, and audio onto your slides.
8. Tap Send to send the MMS message.
Tip
You can also send an MMS message from Pictures & Videos, Album, or the Camera
program.
1ꢀ0 Exchanging Messages
To add text to an MMS message
When you tap Insert text here on your MMS message, an empty screen appears
where you can enter your text. You can insert the following types of information:
Enter your own text
Insert contact
Choose from common words
information
or phrases from the My Text list
Insert calendar
appointment
Include a Favorites link
Add an emoticon
Tip
To edit or delete a phrase on the My Text list, tap and hold a string, then tap Edit or
Delete from the shortcut menu. To add a new phrase, tap New.
To add an audio clip to an MMS message
You can add one audio clip per slide in your MMS message.
1. Tap Insert audio on your MMS message.
By default, My Documents will be shown. Tap My Music or another folder that
contains audio files. When navigating folders, tap the down arrow ( ) to
return to the upper folder.
2. Select an audio file. When selected, you can:
•
•
•
Tap
Tap Select to insert it into your MMS message.
Tap Exit ( ) to quit selection and return to your MMS message.
to play the audio clip,
to pause, or
to stop playback.
Exchanging Messages 1ꢀ1
Note
To record a new audio clip and add it to your MMS message, tap
. The Record pop-
up window then opens. Tap Record to start recording, and Stop to end the recording.
Tap Play to listen to the recorded audio clip, then tap Add. The new audio clip is then
inserted into your MMS message.
View and reply to MMS messages
To view an MMS message
•
•
Use the playback controls
,
, and
.
Tap Contents to see a list of files included in the message. On the Message
Contents screen, you can do the following:
•
•
To save a file, select it, and tap Menu > Save.
To save the contents of a text file to the My Text list, tap
Menu > Save into My Text.
•
To associate a photo to one of your contacts, tap
Menu > Assign to Contact.
To reply to an MMS message
1. In the SMS \ MMS inbox, press Navigation Up or Down to select the mobile
phone number or name of the contact who sent you the MMS message.
2. In the threaded message, MMS messages will have the
icon. Tap this icon
to open and view an MMS message.
3. After viewing the MMS message, tap Menu > Reply > via MMS to reply
with an MMS message or tap Menu > Reply > via SMS to reply with a text
message.
1ꢀꢀ Exchanging Messages
To block a phone number from sending you MMS messages
If you do not want to receive MMS messages from a particular sender, you can add
the sender’s phone number to the MMS Blacklist.
1. When you receive a new MMS message, open and view the message.
2. To avoid receiving MMS messages from this sender next time, tap Menu >
Show > Message Detail.
3. On the Message Detail screen, tap Menu > Show Contact Details.
4. Tap Menu > Save to Blacklist.
5. Tap Done.
Tip
To unblock a phone number and allow the sender to send you MMS messages,
remove the number from the Blacklist. Go to the SMS \ MMS inbox, tap Menu > MMS
Options > Blacklist tab, tap and hold the phone number in the Blacklist, and then
tap Delete.
6.4 Types of E-mail Accounts
You can set up the following types of e-mail accounts on your device:
•
•
Outlook e-mail that you sync with your computer or the Exchange Server.
E-mail account that you have from an Internet Service Provider (ISP) or other
e-mail provider.
•
•
Web-based e-mail accounts such as Gmail®, Yahoo!® Mail Plus, AOL®, and
others.
Work account that you access using a VPN connection.
Exchanging Messages 1ꢀꢁ
Set up your device to synchronize Outlook e-mail with the
computer
If you have installed the synchronization software on your computer and created a
partnership with your device, then your device is ready to send and receive Outlook
e-mail.
If you have not yet installed the synchronization software nor created a partnership,
do so by following the procedures in Chapter 5.
Tip
To set up your company e-mail account so that you can access Outlook e-mail
messages wirelessly, you must set up your device to synchronize via an over-the-
air connection with your company’s Exchange Server. For more information about
synchronizing with your company e-mail server, see Chapter ꢃ.
Add an e-mail account
To add a new e-mail account, you can do one of the following:
•
On the TouchFLO ꢁD Home screen, slide to the Mail tab and then touch
Menu > Accounts > New Account; or
•
Tap Start > Messaging > Setup E-mail.
The E-mail Setup wizard then opens and lets you enter your e-mail account
settings. See “E-mail Setup Wizard”in this chapter for details.
1ꢀ4 Exchanging Messages
6.5 E-mail Setup Wizard
Windows Mobile’s E-mail Setup wizard walks you through the process of setting
up your e-mail account. It has an Auto Setup feature which can automatically set
up your e-mail account based on the e-mail address and password that you enter,
if your e-mail provider settings are preconfigured on your device. If the settings
are not found on your device, Auto Setup then attempts to retrieve the settings
online for which you may be charged when your device connects to the Internet
and downloads them. If it cannot find the e-mail settings online, you need to enter
them manually.
Note
For more information about setting up your company Outlook e-mail account, see
Chapter ꢃ.
Set up an Internet e-mail account
Set up a POPꢁ or IMAP4 e-mail account on your device if you have an e-mail
account from an Internet service provider (ISP) or other e-mail service provider, or a
web-based account such as Gmail, Yahoo! Mail Plus, or AOL. You can also add a work
account that you access using a VPN server connection as a POPꢁ/IMAP4 account.
1. Add a new e-mail account. See “Add an e-mail account”for instructions.
2. Enter your E-mail address and the Password for your e-mail account and
select the Save password option. Tap Next.
3. If e-mail provider settings are found preconfigured on your device, the E-mail
Setup wizard shows a successful message. Tap Next.
If the settings are not found on your device, select the Try to get e-mail
settings automatically from the Internet checkbox to find and download
e-mail server settings from the Internet and then tap Next.
Exchanging Messages 1ꢀ5
4. Enter Your name and the Account display name and then tap Next.
Note If the E-mail Setup wizard was unsuccessful in finding and downloading settings
from the Internet, select Internet e-mail from the Your e-mail provider list on
the next screen. You will be asked to enter e-mail server settings. See “To specify
e-mail server settings”for details.
5. In the Automatic Send/Receive list, choose how frequent you want e-mail
messages to be automatically sent and downloaded on your device.
Note Tap Review all download settings to select download options, set the e-mail
format as HTML or plain text, and more. For more information, see “To customize
download and format settings."
6. Tap Finish.
To specify e-mail server settings
If Auto Setup is unsuccessful, contact your ISP or e-mail provider for the Incoming
mail server and Outgoing mail server settings so you can enter them on your
device.
Other options that you can select include the following:
•
Select the Outgoing server requires authentication check box, if required
by your provider.
•
If the outgoing e-mail server requires a different user name and password
for sending e-mail, clear the Use the same user name and password for
sending e-mail check box. You will be prompted to enter this information.
•
Tap Advanced Server Settings, then select the Require SSL check boxes if
your e-mail provider uses an SSL connection for more secured e-mail. From
the Network connection list, select the data connection that you use for
connecting to the Internet.
1ꢀꢂ Exchanging Messages
To customize download and format settings
Before you tap Finish when setting up your POPꢁ or IMAP4 e-mail account, you can
tap the Review all download settings link at the bottom of the screen to choose
download options, message format, and other settings.
Options
Description
Automatic Send/Receive
You can select a time interval for connecting to the
Internet automatically to send and receive messages.
Download messages
Set the number of days of messages that you want to be
downloaded to your device.
Send/receive when I click
Send
By default, messages are immediately delivered when you
tap Send. If you prefer to save outgoing messages to the
Outbox folder first, clear the check box. (In this case, you
will need to manually send messages by tapping Menu >
Send/Receive).
Use automatic send/
receive schedule when
roaming
This allows your device to data roam when there is a set
time interval for connecting to the Internet automatically.
Since this may result in higher connection costs, you may
want to leave the check box cleared.
When deleting messages
Choose whether to delete messages from the mail server
when you delete them on your device.
Message format
Select HTML or Plain Text.
Message download limit
Select the e-mail download size. If you have large volumes
of e-mail, use a lower size or select to download headers
only.
Exchanging Messages 1ꢀꢃ
Set up a custom domain e-mail
When you are using an e-mail domain name that is hosted by a different e-mail
provider (for example, your e-mail address may be [email protected] but
Email.com hosts the e-mail account and provides e-mail services), select the
Custom Domain option in the E-mail Setup wizard to set up your e-mail account
on your device.
1. Add a new e-mail account. See “Add an e-mail account”for instructions.
2. Enter your E-mail address and the Password for your e-mail account and
select the Save password option. Tap Next.
3. Clear the Try to get e-mail settings automatically from the Internet and
then tap Next.
4. In Your e-mail provider, select Custom domain and then tap Next.
5. Enter the domain of your e-mail provider and then tap Next.
6. The E-mail Setup wizard then tries to find the e-mail provider settings on your
device or from the Internet. If the settings are found, it shows a successful
message. Tap Next.
7. Enter Your name and the Account display name and then tap Next.
Note If the E-mail Setup wizard was unsuccessful in finding the settings, you will be
prompted to enter e-mail server settings on the succeeding screens. See “To
specify e-mail server settings”for details.
8. In the Automatic Send/Receive list, choose how frequent you want e-mail
messages to be automatically sent and downloaded on your device.
Note Tap Review all download settings to select download options, set the e-mail
format as HTML or plain text, and more. For more information, see “To customize
download and format settings."
9. Tap Finish.
1ꢀ8 Exchanging Messages
6.6 Using E-mail
After setting up e-mail accounts on your device, you can start sending and
receiving e-mail messages.
Create a new e-mail message
Depending on your preference, there are two ways you can create a new e-mail
message.
To start from an empty message
1. On the TouchFLO ꢁD Home screen, slide to the Mail tab.
2. Select the e-mail account you want to use on the right side of the screen.
Tip
To choose from other e-mail accounts that are not displayed on the Mail tab,
touch Menu > Accounts > Accounts and then select an e-mail account from the
Account Picker screen.
3. Touch the New E-mail icon (
) to create a new e-mail.
To send an e-mail to a favorite contact
1. On the TouchFLO ꢁD Home screen, slide to the People tab.
2. Swipe your finger on the screen to flip through the photos of your favorite
contacts.
3. When the photo of the desired contact is displayed, touch the displayed
photo and then touch Send e-mail.
For more information about working with favorite contacts, see “People”in Chapter
ꢁ.
Tip
You can also touch Start > Contacts, select a contact name, and then touch Send
e-mail.
Exchanging Messages 1ꢀ9
Compose and send an e-mail
After creating a new e-mail, follow the steps below to enter your message and then
send it.
1. To add recipients, enter their e-mail addresses, separating them with a
semicolon. You can also tap To if you want to add e-mail addresses stored in
Contacts.
2. Enter a subject and compose your message.
Tip
To choose from preset messages, tap Menu > My Text and tap a desired
message. To check the spelling, tap Menu > Spell Check.
3. Tap Send.
Tips
•
For more information about entering text and symbols, see Chapter 4.
•
•
To set the message priority, tap Menu > Message Options.
If you are working offline, e-mail messages are moved to the Outbox folder and
will be sent the next time you connect.
To add an attachment to a message
1. In the message that you are composing, tap Menu > Insert and tap the item
you want to attach: Picture, Voice Note, or File.
2. Select the file or picture you want to attach, or record a voice note.
Filter the Inbox message list
When the Inbox on your device is full of messages, you can filter your Inbox to
display only the messages that contain a particular sender or subject you are
searching for.
To filter your Inbox
Enter the sender name or e-mail subject you want to look for. As you type
characters, the message list narrows down to the sequence of characters you have
entered.
1ꢁ0 Exchanging Messages
For example, entering “B”, then “E”narrows
the list to only the e-mails that contain sender
names and e-mail subjects that start with “BE.”
View and reply to messages
To download a complete e-mail
By default, each e-mail received in the inbox on your device contains only the
first few kilobytes of the message. When you open an e-mail, it displays only the
headers and part of the message. You must download the whole e-mail to view the
complete content.
To download a complete e-mail message, open the e-mail and then do one of the
following:
•
Finger-scroll to the end of the message, and tap Get entire message and
any attachments (POPꢁ e-mail account) or tap Get the rest of this message
(IMAP4 and Outlook e-mail accounts).
•
Tap Menu > Download Message.
Notes
•
The Fetch Mail feature, which is available for POPꢁ and IMAP4 Internet e-mail
accounts, downloads an entire e-mail without the need for you to perform a full
synchronization. This limits the download to just the e-mail message that you want
and helps save data cost.
Fetch Mail is also available for Outlook E-mail. See “Instant download through
Fetch Mail”in Chapter ꢃ for details.
Exchanging Messages 1ꢁ1
•
Download may take some time, depending on the speed of your Internet
connection, size of the whole e-mail, and whether file attachments are
automatically downloaded.
To download file attachments
•
POP3 e-mail account:
File attachments of a POPꢁ Internet e-mail account are automatically
downloaded when you download a complete e-mail.
•
IMAP4 and Outlook e-mail accounts:
File attachments appear below the subject of an e-mail message. Tapping an
attachment opens the attachment if it has been fully downloaded or marks it
for download the next time you send and receive e-mail.
You can set automatic download of file attachments. See “Customize e-mail
settings”in this chapter for details.
To reply to or forward a message
1. Open the message and tap Menu > Reply, Menu > Reply All, or
Menu > Forward.
2. Enter your response, then tap Send.
Notes
•
You can receive and view HTML e-mails from any type of e-mail account. The
HTML format is retained, without layout shifting or resizing. HTML e-mail support
in Outlook Mobile is available only if you are synchronizing your device with
Microsoft Exchange Server ꢀ00ꢃ.
•
When replying using an Outlook e-mail account, you can customize ActiveSync
to exclude addresses, including your own, from being added to the recipient list.
Tap Menu > Options in ActiveSync, select the E-mail item, tap Settings, then tap
Advanced. In the My e-mail addresses text box, enter e-mail addresses you want
to exclude.
1ꢁꢀ Exchanging Messages
Synchronize e-mails
Synchronizing e-mails ensures that new e-mails are downloaded to the device
Inbox folder, e-mails in the Outbox folder are sent, and e-mails deleted from the
server are removed from your device. The manner in which you synchronize e-mails
depends on the type of e-mail account you have.
To automatically synchronize an Outlook e-mail account
1. Connect your device to your computer through USB or Bluetooth.
Otherwise, connect through Wi-Fi or a data connection if you are
synchronizing Outlook e-mail with the Exchange Server. For more
information, see Chapter ꢃ.
2. Synchronization automatically begins, and your device sends and receives
Outlook e-mail.
To manually synchronize your Outlook or Internet e-mail account
1. Select your Internet e-mail account. (See “To select a messaging account”in
this chapter.)
2. Tap Menu > Send/Receive.
Customize e-mail settings
To change the download size and format for Outlook e-mail
1. Disconnect your device from the computer.
2. Tap Start > Programs > ActiveSync.
3. Tap Menu > Options, select E-mail, then tap Settings.
4. On the E-mail Sync Options screen:
•
Under Message format, select HTML or Plain Text. HTML is only available
when connected to Microsoft Exchange Server ꢀ00ꢃ or later.
•
Under Download size limit, select the desired e-mail size.
5. Close ActiveSync and reconnect your device to the computer.
Exchanging Messages 1ꢁꢁ
To change the download size and format for Internet e-mail
1. Tap Menu > Options on the Account Picker screen, or tap Menu > Tools >
Options while you’re in a message list.
2. Tap your POPꢁ or IMAP4 Internet e-mail account.
3. Tap Download Size Settings.
4. Under Message format, select HTML or Plain Text.
5. Under Download size limit, select the desired e-mail size.
6. Tap Done.
To automatically receive attachments on Outlook e-mails
1. Tap Start > Programs > ActiveSync.
2. Tap Menu > Options.
3. Tap E-mail > Settings, then select Include file attachments.
To automatically receive attachments on IMAP4 e-mails
1. Tap Menu > Options on the Account Picker screen, or tap Menu > Tools >
Options while you’re in a message list.
2. Tap the name of your IMAP4 e-mail account.
3. Tap Download Size Settings.
4. In Download attachments:
•
•
Select All attachments to always download file attachments; or
Select a file size limit for auto-downloading attachments.
5. Tap Done.
To store attachments on the storage card
1. Tap Start > Messaging.
2. Tap Menu > Options > Storage tab.
3. Select the When available, use this storage card to store attachments
check box.
1ꢁ4 Exchanging Messages
Chapter 7
Working With Company E-mails and
Meeting Appointments
7.1 Synchronizing with the Exchange Server
7.2 Working With Company E-mails
7.3 Managing Meeting Requests
7.4 Finding Contacts in the Company Directory
1ꢁꢂ Working With Company E-mails and Meeting Appointments
7.1 Synchronizing with the Exchange Server
To keep up-to-date with your company e-mails and meeting schedules while you’re
out of the office, you can connect your device to the Internet through Wi-Fi or a
data connection and synchronize with your company’s Exchange Server.
Set up an Exchange Server connection
Before you can synchronize or access information on the Exchange Server, you
need to set up an Exchange Server connection on your device. You need to get the
following information from your network administrator and enter them on your
device:
•
•
•
Exchange Server name (must be Outlook Web Access server name)
Domain name
User name and password that you use at work
If you have not synchronized your device with your computer, follow these steps to
set up an Exchange Server connection.
1. Add a new e-mail account. See “Add an e-mail account”in Chapter ꢂ for
instructions.
2. Enter the E-mail address and Password for the e-mail account and select the
Save password option. Tap Next.
3. Clear the Try to get e-mail settings automatically from the Internet option
and tap Next.
4. In Your e-mail provider, select Exchange server and tap Next.
5. Tap Next again.
6. Select the Attempt to detect Exchange Server Settings automatically
option and tap Next.
7. Enter the Domain name and tap Next.
8. In Server address, enter the Exchange Server address and tap Next.
Working With Company E-mails and Meeting Appointments 1ꢁꢃ
9. Select the items that you want to sync with the Exchange Server.
Tips • To change synchronization settings of an information item, for example, E-mail,
select the item, then tap Settings.
• To change the rules for resolving synchronization conflicts, tap Menu >
Advanced.
10.Tap Finish.
Notes
•
If you synchronized e-mails with your computer before, open ActiveSync on
your device, then tap Menu > Add Server Source to set up an Exchange Server
connection. When prompted to select information types for synchronization, you
must first clear the E-mail check box under the Windows PC item before you can
select E-mail under Exchange Server.
•
To change Exchange Server settings, open ActiveSync on your device, then tap
Menu > Configure Server.
Start synchronization
Before you start synchronizing with the Exchange Server, make sure your device
has been set up with a Wi-Fi or data connection to the Internet so that you can
synchronize over the air. For more information about connections, see Chapter 8.
After you finish setting up an Exchange Server connection, your device
automatically starts synchronization.
To manually start synchronization, you can do one of the following:
•
On the TouchFLO ꢁD Home screen, slide to the Settings tab and then touch
Sync Data; or
•
Tap Start > Programs > ActiveSync and then tap Sync.
Note
If you connect your device to your office computer via a USB or Bluetooth connection,
you can use this connection to the computer to “pass through”to the network and
download Outlook e-mails and other information to your device.
1ꢁ8 Working With Company E-mails and Meeting Appointments
7.2 Working With Company E-mails
Your device gives you instant access to your company e-mails and lets you manage
your messages easier. Direct Push, Fetch Mail, Remote e-mail search, and e-mail
flags are just some of the tools you can use to manage your e-mails.
Note
Some messaging features depend on the Microsoft Exchange Server version used in
your company. Check with your network administrator for the availability of these
features.
Automatic synchronization through Direct Push
Direct Push technology (push e-mail feature) enables you to receive new e-mails on
your device as soon as they arrive in your Inbox on the Exchange Server. Items such
as contacts, calendar and tasks are also immediately updated onto your device when
these items have been changed or new entries have been added on the Exchange
Server. To make Direct Push work, you need to have a Wi-Fi or data connection on
your device.
You need to perform a full synchronization between your device and the Exchange
Server first before Direct Push can be enabled.
Requirement
The Direct Push feature works for your device only if your company is using
Microsoft Exchange Server 2003 Service Pack 2 (SP2) with Exchange
ActiveSync or higher version.
You can turn on Direct Push in the Comm Manager or ActiveSync.
To turn on Direct Push in Comm Manager
1. To open the Comm Manager, slide to the Settings tab on the TouchFLO ꢁD
Home screen and then touch Communications.
Tip
You can also tap Start > Programs > Comm Manager.
2. On the Comm Manager screen, touch Microsoft Direct Push.
Working With Company E-mails and Meeting Appointments 1ꢁ9
To turn on Direct Push in ActiveSync
1. Tap Start > Programs > ActiveSync and then tap Menu > Schedule.
2. Select As items arrive in the Peak times and Off-peak times boxes.
Note
When Direct Push is off, you need to manually retrieve your e-mails.
Scheduled synchronization
If you do not want to use Direct Push, you can set a regular schedule for
synchronizing Outlook e-mail and information.
1. In ActiveSync on your device, tap Menu > Schedule.
2. Select a shorter time interval in the Peak times box for you to be able to
receive e-mails more frequently. (Peak times usually refer to your working
hours when e-mail volume is high).
3. Select a longer interval in the Off-peak times box.
Tip
To set the days and hours that make up your peak and off-peak times, tap the
peak times link at the bottom of the screen.
Instant download through Fetch Mail
The Fetch Mail feature downloads an entire e-mail immediately without the need
for you to perform a full Send/Receive action. This limits the download to just the
e-mail message that you want and helps save data cost.
Requirement
Fetch Mail works for your device only if your company is using Microsoft
Exchange Server 2007 or higher.
1. On the TouchFLO ꢁD Home screen, slide to the Mail tab, select your Outlook
account, and then tap Inbox.
Tip
You can also tap Start > Messaging > Outlook E-mail.
2. Open an e-mail message.
140 Working With Company E-mails and Meeting Appointments
3. By default, only the first few words of the message is shown. To download the
whole e-mail, finger-scroll to the end of the message, then tap Get the rest
of this message.
4. Wait for the remainder of the message body to download.
Notes
•
For information about changing e-mail sync options such as setting the download
size for e-mail, see "Customize e-mail settings" in Chapter ꢂ.
•
When you receive an e-mail that contains a link to a document such as a PDF or
Microsoft Office document located on SharePoint or an internal file server, you
can tap the link to view the document on your device. You can view the document
only if you have a Microsoft Outlook account that synchronizes with Microsoft
Exchange Server ꢀ00ꢃ or later. Exchange Server must also be set up to allow access
to SharePoint document libraries or internal file servers.
Search for e-mails on the Exchange Server
You can access e-mails that are not available on your device by searching your
Microsoft Exchange Server mailbox. The search results are downloaded and
displayed in a Search Results folder.
Requirement
Your company must be using Microsoft Exchange Server 2007 or higher.
1. Tap Start > Messaging > Outlook E-mail.
2. Tap Menu > Tools > Search Server.
3. In the Look for text box, enter the search keyword.
4. Choose the date range of messages to search from.
5. In the Look in list, specify whether to search in the Inbox, Sent Items, or All
Folders.
6. Tap Search.
Tip
To clear the search results and return to the message list, tap Menu > Clear Results.
Working With Company E-mails and Meeting Appointments 141
Flag your messages
Flags serve as a reminder for you to follow-up on important issues or requests
contained in e-mail messages. Flagging messages, which has been a useful feature
on desktop Outlook E-mail, can also be done in Outlook Mobile on your device. You
can flag received e-mail messages on your device.
Requirement
Flags are enabled only if e-mails are synchronized with Microsoft Exchange
Server 2007 or higher. Flags are disabled or hidden if e-mails are
synchronized with earlier versions of Microsoft Exchange Server.
To flag or unflag a message
1. Open Outlook on your device and access the Inbox.
2. Select a message or open a message.
3. Tap Menu > Follow Up and select one of the following options:
•
Set Flag Mark the message with a red flag to indicate that it needs follow
up.
•
Complete Flag Mark the message with a
check mark to indicate that the issue or
request in the e-mail is already completed.
•
Clear Flag Remove the flag to unmark the
message.
Note
E-mail message reminders are displayed on your
device if the messages are flagged with reminders
and synchronized from the Exchange Server.
14ꢀ Working With Company E-mails and Meeting Appointments
Out-of-office auto-reply
Outlook Mobile allows you to retrieve and change
your out-of-office status. Just like desktop Outlook
E-mail, Outlook Mobile automatically sends an auto-
reply message when you’re not available.
To send out-of-office auto-reply messages
1. Tap Start > Messaging > Outlook E-mail.
2. Tap Menu > Tools > Out of Office.
3. In the I am currently list, select Out of the
Office.
4. Enter your auto-reply message, then tap Done.
7.3 Managing Meeting Requests
When you schedule and send meeting requests from your device, you can invite
attendees to your meeting and check their status to know about their availability.
When you receive a meeting request, you can reply by accepting or declining
the request. The meeting request also clearly indicates whether or not there are
conflicting or adjacent meetings.
Requirement
Your company must be using Microsoft Exchange Server 2007 or higher.
To reply to a meeting request
1. When you receive a meeting request e-mail, a notification will be displayed
on your device. Open the e-mail.
2. Tap Accept to reply and accept the meeting request, or tap Menu > Decline
if you cannot attend the meeting.
Tips
•
Before responding, you can check your availability during the time of the
requested meeting by tapping View your calendar.
Working With Company E-mails and Meeting Appointments 14ꢁ
•
If the time of the meeting conflicts with your other appointments, a
“Scheduling Conflict”status appears on top of the e-mail.
3. Choose whether or not to edit your response e-mail before sending, then tap
OK.
If you accepted the meeting request, it will automatically be added as an
appointment in Calendar on your device.
To view the list of meeting participants
1. Tap Start > Calendar.
2. Tap a meeting request that you sent and then tap Attendees. The required
and optional attendees will be listed.
Icons indicating whether each attendee has accepted or declined the
meeting request will also be displayed.
Note To see the icon indicators in the attendees list, make sure Calendar is
synchronized with the Exchange Server.
Tips
•
For information about creating a meeting request, see “To send a meeting request”
in Chapter 1ꢀ.
144 Working With Company E-mails and Meeting Appointments
•
To view an attendee’s contact information, tap the attendee’s name. If the attendee
is included in your contacts list, you will see the contact information immediately.
If the attendee is not in your contacts list, tap Company Directory to view the
contact information.
7.4 Finding Contacts in the Company Directory
In addition to having contacts on your device, you can access contact information
from your organization’s Company Directory. By having over-the-air access to the
Company Directory, you can easily send e-mail messages and meeting requests to
anyone in your company.
Requirement
Access to the Company Directory is available only if your organization is
running Microsoft Exchange Server 2003 SP2 or higher, and you have
completed your first synchronization with the Exchange Server.
1. Synchronize with the Exchange Server.
2. Do any of the following:
•
•
In Contacts, tap Menu > Company Directory.
In a new e-mail message, tap the To box (or tap Menu > Add Recipient),
then tap Company Directory on the top of the list.
Working With Company E-mails and Meeting Appointments 145
•
When creating a meeting request and selecting required and optional
attendees in Calendar, tap Company Directory.
3. Enter a partial or full contact name and tap Search. In the search results list,
tap a contact to select it.
Notes
•
•
You can save a contact from the Company Directory to your device by selecting
the contact, then tapping Menu > Save to Contacts.
You can search on the following information as long as that information is included
in the Company Directory: First name, Last name, E-mail name, Display name, E-
mail address, or Office location.
14ꢂ Working With Company E-mails and Meeting Appointments
Chapter 8
Internet
8.1 Ways of Connecting to the Internet
8.2 Starting a Data Connection
8.3 Using Opera Mobile™
8.4 Using YouTube™
8.5 Using Streaming Media
8.6 Using Windows Live™
8.7 Using Your Device as a Modem (Internet Sharing)
8.8 Using RSS Hub
148 Internet
8.1 Ways of Connecting to the Internet
Your device’s networking capabilities allow you to access the Internet or your
corporate network at work through one of the following connections:
•
•
Wi-Fi
GPRS, ꢁG or EDGE
•
Dial-up
Note
You can also add and set up the following connections:
•
VPN: A VPN connection is used to access your corporate network by using an
existing Internet connection.
•
Proxy: A Proxy connection is used to access the Internet using an existing
connection to your corporate or WAP network.
Wi-Fi
Wi-Fi provides wireless Internet access over distances of up to ꢁ00 feet (100 meters).
To use Wi-Fi on your device, you need access to a wireless access point or “hotspot”.
Note
The availability and range of your device’s Wi-Fi signal depends on the number,
infrastructure, and other objects through which the signal passes.
To turn Wi-Fi on and off
1. On the Home screen, slide to the Settings tab.
2. On the Settings screen, tap Communications > Wi-Fi to enable/disable the
wireless function.
When enabled, the On indicator is activated and available wireless networks
will be detected.
Internet 149
To connect to a wireless network
After Wi-Fi is turned on, your device scans for available wireless networks in your
area.
1. The network names of the detected wireless
networks are displayed on a pop-up message
window. Tap the desired wireless network,
then tap OK.
Note When you select an open (unsecured)
network, you will be automatically connected
to the network after tapping OK. You do not
need to do steps ꢀ and ꢁ.
2. On the next pop-up message window, do one
of the following:
•
•
Tap The Internet if the wireless network
connects your device to the Internet.
Tap Work if the wireless network connects
your device to a private network.
3. Enter the key and then tap Connect.
Next time you use your device to detect wireless networks, you will not see the
pop-up message windows again, and you will not be prompted to enter the
network key of the previously accessed wireless network (unless you perform a
hard reset which will erase custom settings on your device).
Note
Wi-Fi networks are self-discoverable, which means no additional steps are required for
your device to connect to a Wi-Fi network. It may be necessary to provide a username
and password for certain closed wireless networks.
150 Internet
To check wireless network status
You can check the current wireless connection status from any of the following
screens of your device:
•
Title bar.
When you enable Wi-Fi on your device, the Wi-Fi ON icon appears on the
title bar.
After Wi-Fi is turned on, your device scans for available wireless networks and
the wireless signal icon
appears on the title bar. The arrows in this icon
move back and forth while your device is scanning for a wireless network
signal. Once your device successfully connects to a wireless network, the
arrows stop moving.
•
Wireless LAN screen.
On the Home screen, slide to the Settings tab
and then tap Menu > Wireless Networks. On
the Main tab, you will see the wireless network
that your device is currently connected to.
The configuration and signal quality of the
wireless network are also shown.
Internet 151
•
Configure Wireless Networks screen.
On the Home screen, slide to the Settings tab
and then tap All Settings. In the Connections
tab, tap Wi-Fi. This screen displays the wireless
networks currently available.
To connect to a wireless network in the list,
tap and hold on the desired network, then tap
Connect. Tap a wireless network in the list to
view or change its connection settings.
You can also add new wireless networks, if
available, by tapping Add New.
To save battery power while connected to a wireless network
Using Wi-Fi quickly consumes battery power. Turn off Wi-Fi when not in use. You can
also enable power saving settings.
1. On the Home screen, slide to the Settings
tab.
2. On the Settings screen, tap Menu > Wireless
Networks > Power Mode tab.
3. On the Power Mode tab, move the Power
Save Mode slider to a position that
optimizes performance with the least power
consumption.
For example, move the slider to the left (Best
Performance) to have the optimal wireless
network performance; move to the right
(Best Battery) to obtain the maximum battery
usage.
15ꢀ Internet
GPRS/3G
Use GPRS/3G (or EDGE, if available) to connect to the Internet and to send and
receive e-mail and picture messages on your device. You will need a data plan to
use your wireless service provider’s GPRS/ꢁG network. Check with your wireless
service provider to find out about GPRS/ꢁG rates.
GPRS/ꢁG settings are already preconfigured on your device, and your device is
ready to use your wireless service provider’s GPRS/ꢁG services. Do not change the
settings as this may cause services to stop working.
To add a new GPRS/3G connection
When you need to add another GPRS/ꢁG connection on your device, obtain the
Access point name from your wireless service provider. Also, check if the GPRS/ꢁG
network requires a user name and password.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the Connections tab, tap Connections.
3. In My ISP, tap Add a new modem connection.
4. On the Make New Connection screen, enter a name for the connection.
5. In the Select a modem list, select Cellular Line (GPRS , 3G), then tap Next.
Internet 15ꢁ
6. Enter the Access point name, then tap Next.
7. Enter the user name and password, if required, then tap Finish.
Notes
•
•
To view help information for any screen, tap the help icon (
).
To modify your connection settings, tap Manage existing connections and then
tap Edit.
Dial-up
To set up a dial-up connection to your Internet Service Provider (ISP) on your
device, you need the same settings that you normally use when you dial up from
your computer. This includes the ISP server phone number, your user name and
password.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the Connections tab, tap Connections.
3. In My ISP, tap Add a new modem connection.
4. In the Select a modem list, select Cellular Line, then tap Next.
5. Enter the ISP server phone number, then tap Next.
6. Enter your user name, password, and any other information required by your
ISP, then tap Finish.
154 Internet
8.2 Starting a Data Connection
After setting up a data connection such as GPRS/ꢁG or ISP dial-up on your device,
you can now connect your device to the Internet. The connection is started
automatically when you begin using a program that accesses the Internet such as
Opera Mobile.
To manually start a data connection
If you have set up multiple types of data connections on your device, you can
manually start a connection.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the Connections tab, tap Connections.
3. Tap Manage existing connections.
4. Tap and hold the name of the desired connection, then tap Connect.
To disconnect active data connections
1. Tap Start > Programs > Comm Manager.
2. Tap the Data Connection button.
Note
You cannot reconnect a data connection in Comm Manager.
8.3 Using Opera Mobile™
Opera Mobile™ is a full-featured Internet browser, optimized for use on your
device.
Note
You can also use Internet Explorer® Mobile to browse the web. To open Internet
Explorer Mobile, tap Start > Internet Explorer.
To open Opera Mobile
On the Home screen, slide to the Internet tab and then tap Browser.
Internet 155
1
2
8
3
4
5
6
7
9
1
2
3
4
Refresh. Tap to reload the web page being viewed.
Address bar. Enter the URL of the web site here.
Back. Tap to go back to the previous web page viewed.
Bookmarks. Tap to go to the Bookmarks screen where you can add a bookmark, edit
bookmarked web pages, and send the favorite URL link via one of the Messaging
accounts.
5
6
7
Tabs. Tap to add a new browsing tab or switch to another existing browsing tab.
Home. Tap to go to the Home page.
Menu. Tap to open a list where you can change Opera Mobile settings, check downloads,
view History, and more.
8
9
Close tab. Tap to close the current tab. This is only enabled if you have more than one tab
opened.
Exit Full Screen mode. When browsing the web, Opera Mobile automatically switches to
Full screen mode. Tap to show the address and Menu bars again.
15ꢂ Internet
To go to a web site
1. On the Opera Mobile screen, tap the address bar.
2. Enter the URL address and tap
.
Address bar
Search field
Tip
When you tap the address bar, a search field also appears. Quickly search the web by
entering the search item and tapping
.
View web pages
While browsing web pages, use finger gestures to
pan and zoom on the web page.
To zoom in, tap your finger twice on the screen. To
zoom out, tap your finger twice on the screen again.
Tip
Touch and hold an empty area on a web page to
open a shortcut menu that lets you go back to the
previous page, reload the page, add the page as
a Favorite, and more. You can also tap and hold a
link or image on a web page to open a menu with
different options.
To change the screen orientation
Change the screen orientation by simply turning your device sideways.
Internet 15ꢃ
Opera Mobile menu
On the menu bar, tap
to open the menu.
Tap to open the Settings screen where you
can set the default home page, change display
settings, set privacy settings, and more.
Tap to view items being downloaded. You
can also resume or stop current downloads.
Tap to view information about the Web
page you are browsing.
Tap to see web pages that you have viewed.
Tap to manage and view web pages that you
have saved.
Tap to open the Opera Mobile help file.
Tap to close Opera Mobile completely.
Opera Mobile will not run in the background.
Note:
For more information about using Opera Mobile, go to:
http://www.opera.com/products/mobile/
158 Internet
8.4 Using YouTube™
YouTube™ lets you browse, search, and watch video clips from the YouTube server.
Note
You need an active connection to use YouTube. If you are using a GPRS/ꢁG
connection, your data connection bill may increase significantly due to large file sizes
of the videos.
To open YouTube
Tap Start > Programs > YouTube.
Tap to open the Program
Guide list. The Program
Displays the current program
channel being viewed.
Guide list only appears if you
are subscribed to a channel.
Tap to set video
playback quality.
Tap to close the
YouTube.
Tap the arrows to
filter the list by Most
Viewed, Top Rated,
and Featured.
Displays the
available videos
for the selected
program channel.
Tap a video to
Tap to switch
between the
different YouTube
screens.
watch it. Tap
view details about
the video.
to
Browse for videos
The Program Guide list lets you change the program channel so you can browse
different types of videos available on the YouTube server. By default, there is only
one channel in the Program Guide.
Internet 159
To add a new program channel into the Program Guide list
1. On the YouTube screen, tap
.
2. On the Search screen, enter the
channel you want to add to the
Program Guide list.
3. Tap Search. YouTube searches for
the channel and then displays the
available videos from it.
4. Tap
and then on the
confirmation screen, tap OK. The
channel you just subscribed to
will now be shown when you tap
Program Guide.
Tip
You can also add a YouTube user as a program channel. To add, tap
in any of the
YouTube screens and then tap
.
To change the program channel
1. On the Videos screen, tap Program Guide at the top of the screen.
2. On the Program Guide list, select a channel.
3. The video list refreshes to display the available videos for the newly selected
channel.
To delete a program channel from the Program Guide list
You can only delete program channels that you have added to the Program Guide
list.
1. On the Videos screen, tap Program Guide.
2. Scroll down to the channel you want to delete and then tap
.
3. On the confirmation screen, tap Yes.
1ꢂ0 Internet
Watching videos
On the Videos, Bookmarks, or History screen, tap a video to launch the YouTube
Video Player.
Drag to go forward or
Download
backward in the video.
progress
Buffered video
Tap to resize
Tap to go back to
the video to
the beginning of the
fit the screen.
video. .
Tap again to go
back to actual
size.
Tap to toggle
between playing
and pausing the
video.
Tap to stop the
video playback.
Tip
To adjust the volume, press the VOLUME CONTROLS on the side of the device.
Internet 1ꢂ1
Playback Controls
This control
Does this
ENTER
Toggle between playing and pausing video playback.
NAVIGATION Right
(Landscape orientation)
Press and hold to go forward in the video.
NAVIGATION Left
(Landscape orientation)
Press and hold to go back in the video
Press to adjust the volume.
VOLUME CONTROL
When you tap Stop (
) or finish watching the entire video, you are presented
with options on what you can do next.
Tap to go to the
next page of
related videos.
If no action
is taken, it
automatically goes
to the next page
after 10 seconds.
Tap to view details
about the video
you just watched.
Tap to go back to
the previous page
of related videos.
Tap to send the link
to the video you just
watched to another
person using one
of the Messaging
Tap to add the
accounts.
Tap to play back
the video again.
video to your
Bookmarks.
1ꢂꢀ Internet
Bookmarks
You can store frequently viewed videos into Bookmarks for quick access.
To view Bookmarks
On the YouTube screen, tap
. Tap a video to watch it.
To add a video into Bookmarks
Do one of the following:
•
•
After watching a video, tap
On the list of videos, tap
.
on the video you
want to add to Bookmarks and then
tap
.
To delete a video from Bookmarks
1. On the Bookmarks screen, tap Edit.
2. Tap
on the video you want to remove
from Bookmarks.
3. On the confirmation screen, tap Yes.
4. Tap Done.
History
View recently watched videos on the History
screen.
To view History
On the YouTube screen, tap
watch it.
. Tap a video to
Note
To clear the History list, tap Clear.
Internet 1ꢂꢁ
8.5 Using Streaming Media
Streaming Media lets you stream live broadcasts or on-demand media content
from the web. The media is sent in a continuous stream to your device and is played
as it arrives, along with the audio.
The Streaming Media program allows you to play 3GP and MPEG-4 files. It also
supports playback of SDP (Session Description Protocol) files.
To access streaming content via Opera Mobile
In Opera Mobile, you can open a web page containing RTSP (Real Time Streaming
Protocol) links to streaming media content then play the content in the Streaming
Media program.
1. On the Home screen, slide to the Internet tab and tap Browser.
2. In the address bar, enter the URL address of the web page that contains the
RTSP link to the desired *.ꢁgp, *.mp4, or *.sdp file.
3. On the web page, tap the RTSP link.
4. Streaming Media then automatically opens and starts playing the file. During
playback, use the button controls to play/pause, switch to full screen, rewind,
and fast forward.
1ꢂ4 Internet
Rewind
Tap to toggle
Drag to go backward
or forward on the
video.
between playing or
pausing the video
playback.
Tap to switch to full
screen mode. In full
screen mode, tap the
screen to switch back.
Fast forward
To stream media files directly on the Streaming Media Player
Streaming Media only supports RTSP links when you stream *.ꢁgp and *.mp4 files
directly on the program.
Note
Before you launch the Streaming Media program, make sure that you are connected
to the Internet.
1. Tap Start > Programs > Streaming Media.
2. From the program, tap Connect.
3. Enter the URL for the web site (rtsp://) and the file name.
4. Tap Connect.
5. Streaming Media then starts playing the file. During playback, use the button
controls to play/pause, switch to full screen, rewind, and fast forward.
To view streaming video information
Tap Menu > Properties to view the properties and general information of a
streaming video clip, such as video codec, audio codec, dimension, frames, and
duration of the video.
Internet 1ꢂ5
To configure streaming video connection settings
Tap Menu > Options to configure the following settings:
•
Connect via. Choose whether you want to connect to the Internet or
corporate network (intranet) to locate a streaming video clip.
•
•
UDP port range. Specify a range of port numbers to use for streaming.
Media buffer. Specify the memory space (in terms of duration) to allot for
storing video and audio data while streaming media.
8.6 Using Windows Live™
Windows Live™ gives you a full Internet experience on your device. Windows Live™
helps you to find information, pursue your interests, and get in touch with friends
and family on the Internet easier.
Windows Live™ offers the following key features:
•
•
•
•
Live Search Bar, which lets you search for information on the web.
Live Messenger, the next generation of MSN Messenger Mobile.
Live Mail, the next generation of Hotmail.
Live Contacts, your address book for storing Live Mail, Live Messenger and
Hotmail contacts.
Set up Windows Live™
The first time you use Windows Live™, sign in using your Windows Live™ ID, which is
your Windows Live™ Mail or Hotmail address, and password.
To set up Windows Live™ for the first time
1. Tap Start > Programs > Windows Live and then tap Sign in to Windows
Live.
2. Tap the links to read the Windows Live™ Term of Use and the Microsoft
Privacy Statement. After reviewing them, tap Accept.
1ꢂꢂ Internet
3. Enter your Windows Live™ Mail or Hotmail address and password, select the
Save password checkbox, then tap Next.
4. Tap Next.
5. Choose what information you want to sync online with your device.
If you select Store Windows Live contacts
in your mobile phone’s contact list, your
Windows Live™ contacts will be added to the
contact list and to Windows Live™ Messenger
on your device.
If you select Sync e-mail, your Windows
Live™ Mail or Hotmail inbox messages will be
downloaded to your device.
6. Tap Next.
7. After synchronization is complete, tap Done.
Internet 1ꢂꢃ
The Windows Live™ interface
On the Windows Live™ main screen, you will see a search bar, navigation buttons,
and an area where you can show and customize your profile.
1
1
2
Search bar
2
3
Navigation Control buttons. Tap the
left or right arrow to switch between
Windows Live™ Messenger, Windows
Live™ Mail, and Sync status.
Tap to change the display name,
picture, or personal message.
3
4
Tap Menu to access and change
settings.
4
Windows Live™ Messenger
With this mobile version of Windows Live™ Messenger, you enjoy many of the
same cool features that you get from the desktop version, which include the
following:
1ꢂ8 Internet
•
•
•
•
•
•
•
Instant messaging via text and voice
Multiple conversations
Insert emoticons
Contact list with presence
Send and receive files including photos
Change status/display name
View contacts by online status, groups, and
more
•
Send messages even when a contact is
offline
Note
Before you can use Windows Live™ Messenger, your device must be connected to
the Internet. For information about setting up an Internet connection, see “Ways of
Connecting to the Internet”in this chapter.
Launch Messenger and sign in
To open Windows Live™ Messenger
Do one of the following:
•
•
Tap Start > Programs > Messenger.
On the Windows Live™ main screen, tap the left or right arrow until you see
Messenger, then tap it.
To sign in and out
1. Tap Sign in on the Messenger screen.
2. If this is your first time to sign in, a message appears to inform you that your
messenger contacts will be added to the contact list on your device. Tap OK
to add them.
Signing in may take several minutes, depending on your connection speed.
3. To sign out, tap Menu > Sign Out.
Internet 1ꢂ9
To start and end conversations
1. In the contact list, select a contact, then tap Send IM to open a message
screen.
2. Enter your text message in the text entry area of the message screen.
3. To add an emoticon, tap Menu > Add emoticon then tap an icon from the
list.
4. Tap Send.
5. To end a conversation with the current contact, tap Menu > End
conversation.
Tips
•
•
•
To send a file, tap Menu > Send. You can choose to send a picture, voice clip or any
file.
To invite one or more contacts to the conversation, tap Menu > Options > Add
participant.
To send a voice message, tap Voice Clip on a message screen then start talking.
After you have recorded a message, tap Send.
Add Windows Live™ contacts
You can add new Windows Live™ contacts in Windows Live™ Messenger or in
Contacts.
To add a Windows Live™ contact in Live Messenger
1. Tap Menu > Add new contact.
2. Enter the e-mail address of the contact, then tap OK.
To add a Windows Live™ contact in Contacts
1. On the Home screen, slide to the People tab and then tap All People.
2. Tap New, then tap Windows Live.
3. In the IM box, enter the e-mail address of the contact, which can be a
Windows Live ID or any other e-mail address.
1ꢃ0 Internet
Tip
You can fill in other information about the contact, if desired. This is not
necessary if you will communicate with the contact only through Windows Live™
Messenger or Live Mail.
4. Tap OK.
5. Follow the remaining instructions to add the new contact to your Windows
Live™ contact list.
8.7 Using Your Device as a Modem (Internet Sharing)
Internet Sharing connects your desktop or notebook computer to the Internet by
using your device’s data connection (GPRS or EDGE, for instance). You can choose to
connect via USB or Bluetooth.
Notes
•
Make sure your device has a SIM card installed, and your device has a GPRS/ꢁG or
phone dial-up modem connection. If your device has not been set up with a data
connection yet, tap Menu > Connection Settings on the Internet Sharing screen.
For more information about setting up these connections, see "GPRS/ꢁG" and
"Dial-up" in this chapter.
•
•
If you want to use a USB cable connection, you must first install Windows Mobile
Device Center or Microsoft ActiveSync version 4.5 or later on the computer.
If you want to use a Bluetooth connection, make sure your computer has built-in
Bluetooth capability. If your computer does not have Bluetooth, you can connect
and use a Bluetooth adapter or dongle.
•
Before using Internet Sharing, disconnect from Windows Mobile Device Center or
ActiveSync on your computer.
Internet 1ꢃ1
To set up your device as a USB modem
1. On your device, tap Start > Programs >
Internet Sharing.
2. In the PC Connection list, select USB.
3. In the Network Connection list, select the
name of the connection that your device uses to
connect to the Internet.
4. Connect your device to the computer using the
USB cable.
5. Tap Connect.
To use your device as a Bluetooth modem
For the computer to use the Internet connection of your device, activate Internet
Sharing on your device, then set up a Bluetooth Personal Area Network (PAN)
between the computer and your device.
1. On your device, turn on Bluetooth and set it to visible mode by following
the steps in “To turn Bluetooth on and make your device visible”section in
Chapter 9.
2. Initiate a Bluetooth partnership from your device by following the steps in “To
create a Bluetooth partnership”
3. Tap Start > Programs > Internet Sharing.
4. Select Bluetooth PAN as the PC Connection.
5. From the Network Connection list, select the name of the connection that
your device uses to connect to the Internet.
6. Tap Connect.
7. On your computer, set up a Bluetooth Personal Area Network (PAN) with your
device:
1ꢃꢀ Internet
For Windows Vista:
a. Click Start > Control Panel > Network and Internet > Network and
Sharing Center.
b. Click Manage network connections and then under Personal Area
Network, double-click Bluetooth Network Connection.
c. In the Bluetooth Personal Area Network Devices dialog box, select your
device, then click Connect.
For Windows XP:
a. Tap Start > Control Panel > Network Connections.
b. Under Personal Area Network, click the Bluetooth Network Connection
icon.
c. Under Network Tasks, click View Bluetooth network devices.
d. In the Bluetooth Personal Area Network Devices dialog box, select your
device, then click Connect.
Note If the Bluetooth adapter or dongle on your computer was installed using a third-
party provided driver, open the Bluetooth software that came with the Bluetooth
adapter/dongle to connect your computer and device via Bluetooth. Refer to the
Bluetooth adapter/dongle documentation for more information.
8. On the Internet Sharing screen on your device, check if a connected
status message is displayed, which indicates that your computer has been
successfully connected to the Internet using your device as a Bluetooth
modem.
To end the Internet connection
On the Internet Sharing screen, tap Disconnect.
Internet 1ꢃꢁ
8.8 Using RSS Hub
RSS Hub is an RSS reader that keeps you up-to-date with the latest news from the
Internet. It monitors Internet news channels and downloads the most current news
updates and podcasts so you are instantly informed of breaking news and events.
For more information and tips on using RSS Hub, see Help on your device.
Note
Make sure you have an active Internet connection (such as EDGE or GPRS) before
using RSS Hub.
Subscribe to and organize news channels
You must subscribe to news channels before you can receive RSS feeds.
To subscribe to news channels
1. Tap Start > Programs > RSS Hub, then tap Continue.
2. In the New Channel Wizard screen, select the Choose from a list of known
Channels option, then tap Next. A list of RSS channels is displayed.
Category
Channels
Tap to load pre-selected RSS channels.
1ꢃ4 Internet
Note If the RSS channel you want to subscribe to is not in the list of known channels,
tap Back, then select another option on the New Channel Wizard screen. For
more information on these other options, see the Help on your device.
3. Select the checkboxes of the RSS channels you want to subscribe to, then tap
Finish.
Tip
Channels are grouped by categories. If you want to select all channels in a
category, select the category check box.
4. The channel list appears. Tap Refresh to update the channels.
Tap to select the
channel category
to display
Channel list
Channel is updated.
Tap it to view the
headlines.
Headline count
Tap to update
the channels
Tap to cancel
channel updating
To add new channels
1. In the channel list, tap Menu > Channel > New to open the New Channel
Wizard screen.
2. Select an option, then follow screen instructions to add new channels. For
more information on New Channel Wizard options, see Help on your device.
Internet 1ꢃ5
To filter the channels in the display
In the channel list, tap Menu > View, then select:
•
•
Updated to display only those channels with unread headlines.
All to display all subscribed channels.
Manage channel categories
To view all the channels in a particular category, tap All Categories in the upper left
area of the channel list, then tap the category you want to display.
To add a new category, tap Menu > Categories in the channel list to display all
categories, then tap Menu > New.
To rename or delete a category, tap Menu > Categories in the channel list to
display all categories, select a category, then tap Menu > Rename or Menu >
Delete.
If you want to change the channel category, tap and hold the channel in the
channel list, then tap Change Category. Select a new category and tap OK.
View and organize headlines
Tap a channel in the channel list to display the headlines for that channel.
Tap a headline to open
the news summary
Headline or news
screen
summary contains
Audio/Video/Image
a keyword
file attachment is
downloading
Headline has
Tap to play back or view
the file attachment.
been read
New or unread
headline
Tap to download audio/
video file attachment
Tap to return to
the channel list
1ꢃꢂ Internet
New or unread headlines display in bold and are marked with a blue newspaper
icon. Headlines that have been read are marked with a gray newspaper icon.
View the news summary
Tap a headline in the headline list to display the news summary.
Channel name
Headline and
read status
Audio/Video/Image
file attachment.
Tap to download
News summary
the file.
Tap to open the news
item in Opera Mobile.
See “Using Opera
Mobile”in this chapter
for details.
Tap to return to the headline list
To change view options
In the news summary screen, tap Menu to change the text size, fit the text to the
screen (text wrap), or enable ClearType for better viewing.
Internet 1ꢃꢃ
To download, play, or save podcasts
1. When you see an audio or video file attachment
in the news summary, do one of the following to
download the file:
•
•
Tap Menu > Podcasts > Start Download.
Tap the Download audio/Download video
link below the audio/video file icon.
Tip
To cancel the file download, tap Menu >
Podcasts > Cancel Download, or tap Cancel
download below the audio/video file icon.
2. After downloading the file, do one of the following:
•
Tap Menu > Podcasts > Play or tap Play audio/Play video below the
audio/video file icon to play back the file.
•
Tap Menu > Podcast > Save to save a copy of the file to the device main
memory or storage card.
To send the headline link via e-mail
1. In the news summary screen, tap Menu > Send Link via Email.
2. Messaging opens and displays the Account Picker screen. Tap the e-mail
account you want to use to send the headline link.
A new e-mail message is then created with the headline link.
3. Specify the e-mail recipients, then send it.
Note
For more information on how to compose e-mails, see “Using E-mail”in Chapter ꢂ.
1ꢃ8 Internet
To view the next or previous news summary
In the news summary screen, tap Menu > Next or Menu > Previous, or press
NAVIGATION Left or Right.
For more information about the features and configuring RSS Hub, refer to the
online help. To open the online help, tap Start > Help while in RSS Hub.
Chapter 9
Bluetooth
9.1 Bluetooth Modes
9.2 Bluetooth Partnerships
9.3 Connecting a Bluetooth Hands-free or
Stereo Headset
9.4 Beaming Information Using Bluetooth
9.5 Bluetooth Explorer and Bluetooth File Sharing
9.6 Printing Files via Bluetooth
180 Bluetooth
9.1 Bluetooth Modes
Bluetooth is a short-range wireless communications technology. Devices with
Bluetooth capabilities can exchange information over a distance of about eight
meters without requiring a physical connection.
Bluetooth on your device operates in three different modes:
•
On. Bluetooth is turned on. Your device can detect other Bluetooth-enabled
devices, but not vice versa.
•
•
Visible. Bluetooth is turned on, and all other Bluetooth-enabled devices can
detect your device.
Off. Bluetooth is turned off. In this mode, you can neither send nor receive
information using Bluetooth.
Notes
•
•
By default, Bluetooth is turned off. If you turn it on, then turn off your device,
Bluetooth also turns off. When you turn on your device again, Bluetooth
automatically turns on.
Turn off Bluetooth when not in use to conserve battery power, or in places where
using a wireless device is prohibited, such as on board an aircraft and in hospitals.
To turn Bluetooth on and make your device visible
1. On the Home screen, slide to the Settings tab and then tap Menu >
Bluetooth Devices > Mode tab.
2. Select the Turn on Bluetooth and Make this device visible to other devices
check boxes.
3. Tap OK. The Title bar will show
to indicate that the device is in Visible
mode.
To turn off Bluetooth visibility after a certain period of time
You can automatically turn off Bluetooth visibility after a specified period of time.
1. On the Home screen, slide to the Settings tab and then tap Menu >
Bluetooth Devices > Timeout tab.
2. In Turn off Visible mode, select the time before your device’s Bluetooth
visibility turns off. Tap OK.
Bluetooth 181
9.2 Bluetooth Partnerships
A Bluetooth partnership is a relationship that you create between your device and
another Bluetooth-enabled device in order to exchange information in a secure
manner.
To create a Bluetooth partnership
1. On the Home screen, slide to the Settings tab and then tap Menu >
Bluetooth Devices > Devices tab.
2. Tap Add new device. Your device displays the names of other Bluetooth
devices within range.
3. Tap the device name in the box, then tap Next.
4. Specify a passcode to establish a secure connection. The passcode can be 1
up to 1ꢂ characters.
5. Tap Next.
6. Wait for the paired device to accept the partnership. The receiving party
needs to enter the same passcode that you specified.
7. After the receiving party enters the passcode, a message box appears on your
device confirming the partnership.
Tip
Tap Advanced to change the paired device name and to set the services you
want to use for the paired device. After setting the name and options, tap Save.
8. Tap Done.
Note
Creating a Bluetooth partnership between two devices is a one-time process. Once
a partnership is created, the devices can recognize the partnership and exchange
information without entering a passcode again.
18ꢀ Bluetooth
To accept a Bluetooth partnership
1. Ensure that Bluetooth is turned on and in visible mode.
2. Tap Yes when prompted to establish a partnership with the other device.
3. Enter a passcode (the same passcode that is entered on the device requesting
the partnership) to establish a secure connection. The passcode must be
between 1 and 1ꢂ characters.
4. Tap Next.
5. Tap Done. You can now exchange information with the paired device.
Tips
•
To rename a Bluetooth partnership, tap and hold the partnership’s name on the
Devices tab of the Bluetooth screen, then tap Edit.
•
To delete a Bluetooth partnership, tap and hold the partnership’s name on the
Devices tab, then tap Delete.
9.3 Connecting a Bluetooth Hands-free or Stereo
Headset
For hands-free phone conversations, you can use a Bluetooth hands-free headset
such as a car kit with your device. Your device also supports AꢀDP (Advanced Audio
Distribution Profile) which allows you to use a Bluetooth stereo headset for hands-
free phone conversations and for listening to stereo music.
To connect a Bluetooth hands-free or stereo headset
1. Make sure that both your device and the Bluetooth headset are turned
on and within close range, and that the headset is visible. Refer to the
manufacturer’s documentation to find out how to set the headset in visible
mode.
2. On the Home screen, slide to the Settings tab and then tap Menu >
Bluetooth Devices > Devices tab > Add new device.
Bluetooth 18ꢁ
3. Tap the name of the Bluetooth headset, then tap Next. The device will
automatically pair the device with the Bluetooth headset.
Windows Mobile will automatically try one of the preconfigured passcodes (0000,
1111, 8888, 1ꢀꢁ4) to pair the Bluetooth headset with the device. If this fails, you
have to enter the passcode delivered with your headset manually.
Note
If the Bluetooth stereo headset becomes disconnected, turn the headset on and
repeat step 1 to ꢀ above. Tap and hold the name of the Bluetooth stereo headset and
tap Set as Wireless Stereo.
9.4 Beaming Information Using Bluetooth
You can beam information, such as contacts, calendar items, tasks, and files from
your device to your computer or to another Bluetooth-enabled device.
Note
If your computer does not have built-in Bluetooth capability, you need to connect
and use a Bluetooth adapter or dongle on your computer.
To beam information from your device to a computer
1. Turn on Bluetooth on your device, and make your device visible. For
information about this, see “To turn Bluetooth on and make your device
visible”.
2. Set Bluetooth on your computer to visible mode, create a Bluetooth
partnership, then enable your computer to receive Bluetooth beams.
Note If the Bluetooth adapter or dongle on your computer was installed using a third-
party provided driver, open the Bluetooth software that came with the Bluetooth
adapter/dongle and enable the adapter/dongle to be discovered by other
devices. Refer to the Bluetooth adapter’s documentation for more information.
If your computer has Windows Vista or Windows XP SP2 and your
computer’s Bluetooth adapter is supported by your Windows version, do the
following steps:
184 Bluetooth
a. On your computer, open Bluetooth Devices from the Control Panel, then
click the Options tab on the Bluetooth Devices window.
b. For Windows Vista, select Allow Bluetooth devices to find this
computer.
For Windows XP, select Turn discovery on and Allow Bluetooth devices
to connect to this computer.
c. Create a Bluetooth partnership between your device and computer. For
information about creating a partnership, see “Bluetooth partnerships”.
d. In the Options tab of Bluetooth Devices, select Show the Bluetooth
icon in the notification area.
e. To enable your computer to receive Bluetooth beams, right-click the
Bluetooth icon in the notification area at the bottom-right corner of
your computer screen and select Receive a File. You are now ready to
beam.
3. On your device, select an item to beam. The item can be an appointment in
your calendar, a task, a contact card, or a file.
4. To beam a contact, tap Menu > Send Contact > Beam.
To beam other types of information, tap Menu > Beam [type of item].
5. Tap the device name to which you want to send the item.
6. If you beamed a calendar, task, or contact item to your computer and it is not
automatically added to Outlook, select File > Import and Export in Outlook
to import it.
To beam information to a Bluetooth-enabled device such as another Windows
Mobile-powered device, follow steps 1 to 5 in the above procedure.
Tips
•
The default folder on your computer where beamed items are stored may be
C:\Documents and Settings\your_username\My Documents in Windows XP or
C:\Users\your_username\My Documents in Windows Vista.
•
For your device to receive Bluetooth beams, tap Start > Settings > Connections
tab > Beam and make sure the Receive all incoming beams check box is selected.
Bluetooth 185
9.5 Bluetooth Explorer and Bluetooth File Sharing
Bluetooth Explorer searches for other Bluetooth devices that have file sharing
enabled and lets you access their Bluetooth shared folder. You can copy files from
and to their shared folder, and create subfolders in it. When you enable Bluetooth
file sharing on your device, other Bluetooth-enabled devices will also be able to
access your Bluetooth shared folder.
To enable Bluetooth Explorer and Bluetooth file sharing on your device
1. On the Home screen, slide to the Settings tab and then tap Menu >
Bluetooth Devices > FTP tab.
2. Select the Enable Bluetooth Explorer check box. This makes the Bluetooth
device folder visible in File Explorer.
3. Select the Enable File Sharing check box.
You can use the default Bluetooth shared folder, or tap Browse to use
another folder as your shared folder.
4. Tap OK.
To use Bluetooth Explorer
1. Bluetooth Explorer is integrated with the File Explorer program. You can
open it by tapping Start > Programs > Bluetooth Explorer or by tapping
the down arrow ( ) on the upper left of File Explorer screen then tapping
Bluetooth.
18ꢂ Bluetooth
2. Bluetooth Explorer then scans for other
Bluetooth devices that have file sharing
enabled. From the list, tap to select a
Bluetooth device you want to connect to.
You may need to enter a passcode in order
for you to connect to the selected device.
If there are files contained in the Bluetooth
shared folder on the other device, you
will be able to see them on the Bluetooth
Explorer screen.
3. Select one or more files, then tap Menu >
Edit and choose to cut or copy the files.
4. Tap Up twice.
5. Navigate to the folder where you want to paste the files on your device, then
tap Menu > Edit > Paste.
9.6 Printing Files via Bluetooth
Connect your device to a Bluetooth printer to print contact information,
appointment details, images, and other file types.
Note
You can print files in the .txt, .jpg, .xhtml, .vcf, .vcs file formats.
Before you start printing, make sure to turn on the Bluetooth printer and to turn
on Bluetooth on your device. To turn on Bluetooth, tap Start > Programs > Comm
Manager, then tap the Bluetooth button.
Bluetooth 18ꢃ
To print contact information
1. On the Home screen, slide to the People tab and then tap All People.
2. Select the contact whose information you want to print.
3. Tap Menu > Print via Bluetooth > Menu > Search Devices. Your device
starts to search for Bluetooth devices.
4. Select the Bluetooth printer and tap Menu > Send File.
5. Set the printing options you want, then tap Print.
To print a calendar appointment
1. Tap Start > Calendar, then select (highlight) the appointment whose details
you want to print.
2. Follow steps ꢁ to 5 in the “To print contact information”procedure.
To print a JPEG file
1. In Pictures & Videos, locate the JPEG file you want to print.
2. Tap and hold the JPEG image file and then on the menu, tap
Print via Bluetooth.
3. Follow steps ꢁ to 5 in the “To print contact information”procedure:
To print a text file
1. In File Explorer, locate the text file you want to print.
2. Tap and hold the txt file and then on the menu, tap Print via Bluetooth.
3. Follow steps ꢁ to 5 in the “To print contact information”procedure:
188 Bluetooth
Chapter 10
Navigating on the Road
10.1 Guidelines and Preparation for Using GPS
10.2 Downloading Satellite Data via QuickGPS
190 Navigating on the Road
10.1 Guidelines and Preparation for Using GPS
If you install a GPS software on your device, please follow these guidelines before
and when using your device as a GPS device.
•
Do not operate the GPS system while driving. The plotted GPS route is only
for driving reference. It should not interfere with actual driving behavior.
•
Do not leave your device in a vehicle or expose the device to direct sunlight
to avoid overheating the battery, which could pose damage to the device or
risk to the vehicle.
•
When using the device inside a vehicle, use the car holder to mount the
device securely in place. Avoid placing the device in the areas shown in the
following diagram:
1
2
3
Do not place where it will block the driver’s vision.
Do not place where air bags could deploy.
Do not place anywhere in the vehicle without securing the device in the
holder.
•
Please use the GPS system cautiously. Users shall be liable for any damages
resulting from negligent operation of the system.
Navigating on the Road 191
The GPS signal cannot pass through solid non-transparent objects. Signal
•
reception may be affected by obstructions such as high-rise buildings,
tunnels, bridges, forests, weather (rainy or cloudy days), etc. If the vehicle’s
visor contains metal, it will be difficult for the GPS signal to pass through.
•
•
Wireless communication products (such as mobile phones or radar-detecting
devices) may interfere with the satellite signal, resulting in unstable signal
reception.
The Global Positioning System (GPS) is built and operated by the US
Defense Department. The Department is responsible for the accuracy and
maintenance of the system. Any changes that the Department makes may
affect the accuracy and function of the GPS system.
10.2 Downloading Satellite Data via QuickGPS
Before you start using your device for GPS navigation, open the QuickGPS program
first to download ephemeris data (current satellite position and timing information)
onto your device. This data is needed to determine the GPS position of your current
location.
QuickGPS downloads ephemeris data from a web server, instead of from the
satellites, using the Internet connection on your device, which can be via Wi-Fi,
ActiveSync or GPRS/ꢁG. This significantly speeds up the time for determining your
GPS position.
To open QuickGPS
Tap Start > Programs > QuickGPS.
19ꢀ Navigating on the Road
To download data
Tap Download on the QuickGPS screen.
On the screen, initially, you will see the Valid
time of the downloaded data. As time passes,
the remaining days and hours of validity will be
shown.
To speed up GPS positioning, download the
latest ephemeris data when the validity of the
data expires.
Download options
To configure download times, tap Menu > Options and choose from the available
options:
•
Remind me when data expires.
Enables your device to display a reminder message when the validity of the
ephemeris data has expired.
When you see the reminder message, tap Menu to dismiss the reminder or to
set the snooze time so that you will be reminded again. Tap OK to open the
QuickGPS program and download the latest data.
•
•
Auto download when data expires.
Allows ephemeris data to be automatically updated onto your device when
the data has expired.
Auto download when connected to PC via ActiveSync.
Allows ephemeris data to be automatically downloaded via ActiveSync to
your device when your device is connected to your computer. Your computer
must be connected to the Internet in order to download data.
Note The ephemeris data is stored on HTC web servers. QuickGPS is preconfigured to
connect to these servers.
Chapter 11
Experiencing Multimedia
11.1 Taking Photos and Videos
11.2 Viewing Photos and Videos Using Album
11.3 Using Windows Media® Player Mobile
11.4 Using FM Radio
11.5 Using Audio Booster
11.6 Using MP3 Trimmer
194 Experiencing Multimedia
11.1 Taking Photos and Videos
Use Camera to take photos and record video clips. You can either use the main
(back) camera or second (front) camera to take photos or shoot videos.
To open the Camera screen
On the Home screen, slide to the Photos and Videos tab and then tap the camera
icon (
). The screen orientation automatically switches to landscape mode when
you open Camera.
Tip
You can also tap Start > Programs > Camera to open the Camera program.
To exit the Camera
Tap the Exit icon (
) on the Camera screen. Tap the screen to show the Camera
screen icons.
Capture modes
The camera on your device allows you to capture pictures and video clips by using
various built-in modes that provide you flexibility in taking your shots.
To change the capture mode
•
Press NAVIGATION Left or Right
(Landscape orientation).
•
Tap the middle icon at the bottom
of the screen (the icon displayed is
based on the current capture mode.)
On the on-screen menu, tap the
capture mode you want to use.
Current capture mode
Experiencing Multimedia 195
You can select from the following capture modes:
Icon
Capture Mode
Photo Captures standard still images.
Video Captures video clips, with or without accompanying audio.
Panorama Captures a sequence of still images continuously in one
direction, and allows stitching of all the images to create a panoramic
view of a scenery.
MMS Video Captures video clips suitable for sending with MMS
messages.
Contacts Picture Captures a still image and gives you the option to
immediately assign it as a Photo ID for a contact.
Picture Theme Captures still images and places them within frames.
Note
When using the second camera to capture, you can only use Photo, Video, MMS Video,
Contacts Picture, and Picture Theme modes.
Supported file formats
Using the available capture modes, the camera in your device captures files in the
following formats:
Capture mode
Format
Photo / Contacts Picture /
Picture Theme / Panorama
JPEG
Video / MMS Video
H.ꢀꢂꢁ (.ꢁgp) ; MPEG-4 (.mp4)
19ꢂ Experiencing Multimedia
Camera controls
The camera comes with an auto-focus function to let you capture sharp and crisp
photos and videos of your subjects. Depending on the Shoot Option you have
chosen, you will need to either touch or press the ENTER button to activate auto-
focus. When auto-focus is activated, it is indicated by a flashing white bracket (
).
When focus is set, the bracket changes to a steady green bracket (
).
Note
For more information about the different shoot options, see “Advanced Options”in
this chapter.
By default, you need to touch (do not press) the ENTER button to activate auto-
focus and then when focus is set, press the ENTER button to take the shot or start
capturing video. For example, in Photo mode, touch ENTER to activate auto-focus;
when focus is set, press ENTER to take the shot.
Notes
•
In Video or MMS Video mode, press ENTER again to stop recording.
•
In Picture Theme or Panorama mode, press ENTER for each shot you need to take.
On-screen controls and indicators
Tap the screen to display the controls and indicators.
Photo, Video, MMS Video, and
Contacts Picture modes
When capturing in Video and MMS
Video modes
7
6
5
8
1
2
3
4
Experiencing Multimedia 19ꢃ
to zoom out.
1
Zoom control. Tap
to zoom in, or
Tip
You can also press NAVIGATION Up/Down (Landscape orientation) or slide your
finger clockwise or counterclockwise on the center Navigation Control to zoom
in or out.
2
3
Album. Tap to open Album. See “Viewing Photos and Videos Using Album”for
details.
Capture mode. Displays the current capture mode. Tap to open an on-screen
menu where you can choose the capture mode.
4
5
6
Menu. Tap to open the Camera Settings screen. See “Menu Panel”for details.
Exit. Tap to exit the Camera program.
Remaining information indicator. In Photo, Contacts Picture, Picture Theme,
and Panorama modes, this shows the remaining/available shots of pictures
based on the current settings.
In Video and MMS Video modes, this shows the remaining duration that can
be recorded. While recording video, this shows the recorded duration.
7
Auto-focus indicator. Displays a flashing bracket (
focus is set, the flashing bracket changes to a steady green bracket (
) when focusing. When
).
8
9
Recording indicator. Flashes when recording a video.
Picture Theme mode
Template Selector icon. In Picture
Theme mode, tap to toggle among
different templates.
10 Progress indicator. In Picture
Theme and Panorama modes, this
shows the number of consecutive
shots.
9
10
198 Experiencing Multimedia
Menu Panel
The Menu Panel provides a quick way of adjusting most common camera settings
and lets you access more advanced camera settings. On the Camera screen, tap
to open the Menu Panel. To adjust a setting, keep tapping a button on the panel,
for instance, White Balance, to cycle through the available settings. To access
advanced options, tap
.
Note
The available settings on the panel depend on the selected Capture mode.
6
1
2
5
4
3
1
Flash Light. Tap to turn on or off the flash light that is located at the back
of your device. When the flash light is on, the camera gives off a flash when
taking photos.
2
3
Camera. Tap to select the camera to use. You can choose from main camera (
), second camera (
), and second camera flip (
).
Self-timer. Tap to set the self-timer to 2 seconds, 10 seconds, or Off when
in the Photo or Contacts Picture mode. When you press the ENTER button to
capture a still image, it starts to count down, then captures a still image after
the time expires.
4
Advanced. Tap to open the advanced camera settings. See “Advanced
Options”for details.
Experiencing Multimedia 199
5
6
Brightness. Tap to open the Brightness bar at the bottom of the screen. On
the Brightness bar, tap
to decrease, or
to increase the brightness level.
Tap outside the Brightness bar to apply the change.
White Balance. White balance enables the camera to capture colors more
accurately by adjusting to different lighting conditions. White balance
settings include: Auto (
and Fluorescent ( ).
), Daylight (
), Night (
), Incandescent (
),
Zooming
Before capturing a photo or a video clip, you can zoom in to make the object in
focus move closer, or zoom out to make the object move farther away.
To zoom in
Slide your finger around the Navigation Control clockwise, press NAVIGATION Up
(Landscape orientation), or tap
.
To zoom out
Slide your finger around the Navigation Control counterclockwise, press
NAVIGATION Down (Landscape orientation), or tap
.
Zoom Out
Zoom In
ꢀ00 Experiencing Multimedia
The camera zoom range for a photo or a video clip depends on the capture mode
and resolution. Refer to the table for more information.
Capture mode
Resolution
ꢁM (ꢀ048 x 15ꢁꢂ)
Zoom range
1.0x to ꢀ.0x
1.0x to ꢀ.0x
1.0x to ꢀ.0x
1.0x to ꢀ.0x
1.0x to 4.0x
1x and 1.5x
1x and 1.5x
1x and 1.5x
1x and 1.5x
1x and ꢀx
ꢀM (1ꢂ00 x 1ꢀ00)
1M (1ꢀ80 x 9ꢂ0)
Photo
Large (ꢂ40 x 480)
Medium (ꢁꢀ0 x ꢀ40)
CIF (ꢁ5ꢀ x ꢀ88)
Large (ꢁꢀ0 x ꢀ40)
Medium (1ꢃꢂ x 144)
Small (1ꢀ8 x 9ꢂ)
Video
Large (ꢂ40 x 480)
Medium (ꢁꢀ0 x ꢀ40)
Medium (1ꢃꢂ x 144)
Small (1ꢀ8 x 9ꢂ)
Panorama
MMS Video
1x, ꢀx and 4x
1x and 1.5x
1x and 1.5x
Contacts
Picture
1.0x to 4.0x
Medium (ꢀ40 x ꢁꢀ0)
Determined by the current
template
Depends on the size of the selected
template
Picture Theme
Note
For capture size settings and zoom ranges when using the second camera, please
refer to the online help.
Experiencing Multimedia ꢀ01
The Review screen
After capturing, the Review screen lets you view, send, or delete the photo or video
clip by tapping an icon at the bottom of the screen.
Review screen
icons
Icon
Function
Back Return to the live Camera screen.
Delete Delete the captured image or video.
View View the captured image or video in the Album program.
Send Send the captured image or video via e-mail or MMS.
Assign to Contact After capturing in Contacts Picture mode, tap this icon to
assign the photo to a selected contact.
ꢀ0ꢀ Experiencing Multimedia
Advanced Options
The Advanced Options let you adjust options for your selected capture mode
and set Camera program preferences. Access the Advanced Options by tapping
Advanced on the Menu Panel.
You can either tap on-screen or press NAVIGATION Up/Down (Landscape
orientation) to navigate through the Advanced Options screen.
Tap an item
to change the
setting.
Tap to go through
the different
Advanced Camera
Tap to go back to the
Settings screens.
Camera screen.
•
Review Duration. Set a time length for displaying the captured image/video
on the Review screen. Select No Limit if you do not want to impose a time
limit. Select No Review to immediately return to the live Camera screen after
capturing and saving.
•
•
Resolution. Select the resolution to use when taking photos or capturing
videos.
Quality. Select the JPEG image quality level for all captured still images.
Choose from Basic, Normal, Fine, and Super Fine.
•
•
Capture Format. Select the desired file format.
Time Stamp (Photo mode). Choose whether or not to include the shooting
date and time on captured photos.
•
Storage. Select where you want to save your files. You can either save the files
to the main memory or to a storage card if one is installed.
Experiencing Multimedia ꢀ0ꢁ
Keep Backlight. Turn the backlight on or off. This overrides your device
backlight settings while you are using the camera.
•
•
•
Shutter Sound. Choose whether or not you want the camera to make a
shutter sound when you press the ENTER button.
Shoot Option. The camera comes with an auto-focus feature that is activated
when the ENTER button is either touched or pressed.
•
Touch and Press (Default). Requires you to touch the ENTER button to
activate the auto-focus; when focus is set, press the ENTER button to take
the shot.
•
•
Touch. Requires you to touch the ENTER button to activate auto-focus;
when focus is set, Camera automatically takes the shot.
Full Press. Requires you to press the ENTER button to activate auto-focus;
when focus is set, Camera automatically takes the shot.
•
Image Properties. This option lets you adjust the capture properties, such as
Contrast, Saturation, and Sharpness.
1
2
Tap a property to adjust.
Tap to reset all properties to their default
values.
1
2
3
4
Tap to save the settings.
Tap
/
or press NAVIGATION left/
right (Landscape orientation) to increase/
decrease the value.
5
Tap to close the submenu without
applying and saving the changes.
3
5
4
•
•
Effect. Choose a special effect such as Grayscale, Sepia, or Negative, to apply
to your photos or video clips.
Metering Mode. Select a metering mode to allow the camera to measure the
amount of light and calculate the best-fit exposure value before capturing.
ꢀ04 Experiencing Multimedia
Choose either Center Area to measure light using the center area of the
subject, or Average to measure light using the area around the subject.
•
Prefix. When Default is selected as the prefix, the file name of each new
captured file is set to “IMAGE”or “VIDEO”followed by a sequential number, for
example: IMAGE_001.jpg. You may also choose to name files using either the
current Date or Date & Time as the prefix.
Note If you set the Camera to save captured photos to a storage card, the prefix
cannot be selected. Captured photos will be named using the convention
IMAGnnnn.jpg (where ‘nnnn’is the counter) which is the DCIM (Digital Camera
Images) naming standard, and will be saved to the \DCIM\100MEDIA folder on
the storage card.
•
•
Counter. To reset the file naming counter back to 1, tap Reset.
Flicker Adjustment. When taking indoor shots, flicker on the camera screen
may be caused by inconsistencies between the vertical scan rate of the
camera display and the flicker frequency of fluorescent lighting. To reduce
flicker, you can change the flicker adjustment setting to Auto or to the proper
frequency (50Hz or 60Hz) of the power in the country where your device is
being used.
•
•
Grid (Photo mode). Choose whether or
not to show a grid on the Camera screen.
Showing a grid helps you frame and center
your subject easily and accurately.
Record with Audio (Video and MMS Video
mode). Select On to record audio with
the captured video clips, or select Off to
capture video without audio.
Grid marks
•
•
Template (Picture Theme mode). Select a template.
Recording Limit (Video mode). Set the maximum duration or file size for
recording video.
Experiencing Multimedia ꢀ05
Template Folder (Picture Theme mode). By default, templates are stored
in the \My Documents\Templates folder on the device’s Main Memory. If
you transferred some templates to a storage card (via File Explorer), set this
option to Main + Card to specify that templates are located in both the main
memory and the storage card.
•
•
Show Reminder (Contacts Picture mode). Select On if you want the Camera
to always display a message that confirms whether or not to assign the
captured picture to a contact.
•
•
Help. Tap to open the Camera program help file.
About. Tap to display version and copyright information.
11.2 Viewing Photos and Videos Using Album
Use Album to view images and videos in your device. Album offers a host of
features that let you rotate images, view your images as a slideshow, use images as
contact pictures, and more.
Note
Album can only display files in the BMP, GIF, PNG, JPG, Animated GIF, ꢁGP, MP4, and
WMV formats.
To open Album
Do one of the following:
Tap to open
the Camera
program.
•
On the Home screen, slide to the
Photos and Videos tab and tap
Album.
•
•
In the Camera program, tap
.
Tap Start > Programs > Album.
Note
When you open Album from the
Camera program, the screen orientation
of Album is switched to landscape
mode.
ꢀ0ꢂ Experiencing Multimedia
Select a photo or video to view
1. On the main Album screen, tap Albums and then select the album to view.
The contents of the album are then displayed on the main Album screen.
2. Browse through the files by sliding your finger upward or downward.
3. Do one of the following:
•
•
Tap an image to view it in full screen mode. See“View an image”for details.
Tap a video file (files with the icon) to play back the video file. See “Play
back video”in this chapter for details.
•
Select a still image and then tap Menu > Slideshow to view the images in
the album as a slideshow. Animated GIF and video files will not be played
back in the slideshow. See “To view still images as a slideshow”in this
chapter for details.
View an image
While viewing an image in full screen, tap the screen or press ENTER to open the
on-screen menu.
Tap to send the
image using one
of the Messaging
accounts.
Tap to open a menu
where you can save the
screen image as a photo
for a contact, save the
current image as a new
file, delete the image, and
view file properties.
Tap to start the
slideshow.
Tap to go back to
the main Album
screen, Photos
and Videos tab, or
Camera.
Tip
You can delete multiple files at once by selecting Menu > Delete Items on the main
Album screen and then selecting the files to delete.
Experiencing Multimedia ꢀ0ꢃ
To rotate the image
While viewing images, you can automatically rotate the image by simply turning
your device sideways.
To view the next or previous image
When viewing images in Portrait or Landscape mode, go to the next image by
swiping your finger across the screen from right to left. Go back to the previous
image by swiping your finger from left to right.
ꢀ08 Experiencing Multimedia
To zoom in or out of an image
While viewing an image, make a full circle motion on the screen with your finger.
Slide your finger clockwise
on an area to zoom in on
that area.
Slide your finger counter-
clockwise to zoom out.
Tips
•
When you zoom in on an image, double tap the screen to automatically zoom out
and fit the image to the screen.
•
•
•
When you zoom in on an image, tap and hold the screen so you can pan the
image.
You can also zoom in and out of the image by sliding your finger around the
Navigation Control clockwise/counterclockwise.
When you zoom in on an image, tap the screen to open the on-screen menu. On
the on-screen menu, tap
and then select Save Screen Image to save the
image on-screen as a new file.
Experiencing Multimedia ꢀ09
To view still images as a slideshow
While viewing the slideshow, tap the screen to show playback controls.
Note
The screen orientation automatically switches to landscape mode when viewing a
slideshow.
Tap to open the slideshow
options where you can
set the transition effect
to use, time per slide, and
orientation of the images.
Tap to return to
the main Album
screen or the
Photos and
Videos tab.
Tap to go back to the
previous image.
Tap to go to the
next image.
Tap to play or pause the
slideshow playback.
Tip
If the images are in your favorite album, you can start the slideshow from the Photos
and Videos tab on the Home screen. On the Photos and Video tab, tap Slideshow.
ꢀ10 Experiencing Multimedia
Play back video
While playing back video, tap the screen to show the playback controls.
Drag to go forward
or backward in the
video.
Elapsed time
Total duration
Tap to go back to
the beginning of
the video.
Tap to stop
video playback.
Tap to play or pause
video playback.
Tip
If the video is in your favorite album, you can start the video playback from the
Photos and Videos tab on the Home screen. On the Photos and Video tab, tap Play.
Close Album
Close Album by tapping
on the main Album screen. When viewing files in full
screen mode, tap the screen to show the on-screen menu or playback controls and
then tap to go back to the main Album screen.
Experiencing Multimedia ꢀ11
11.3 Using Windows Media® Player Mobile
Windows Media® Player Mobile plays digital audio and video files that are stored
on your device or on a network, such as on a web site.
Video File Formats Supported
File Extensions
Windows Media Video
MPEG4 Simple Profile
H.ꢀꢂꢁ
.wmv, .asf
.mp4
.ꢁgp, .ꢁgꢀ
.mp4, .ꢁgp, .ꢁgꢀ, .m4v
.avi
H.ꢀꢂ4
Motion JPEG
Audio File Formats Supported
File Extensions
Windows Media Audio
WAVE
MPꢁ
.wma
.wav
.mpꢁ
MIDI and SP MIDI
AMR Narrow Band
AMR Wide Band
AAC, AAC+, and eAAC+
MPEG4 audio
QCELP
.mid, .midi, .rmi
.amr, .ꢁgp
.awb,.ꢁgp
.aac, .mp4, .m4a, .ꢁgp
.m4a
.qcp, .ꢁgꢀ
.qcp
EVRC
To open Windows Media® Player Mobile
Tap Start > Programs > Windows Media.
ꢀ1ꢀ Experiencing Multimedia
About the controls
Tap and drag to
jump to any part of
the video or audio
Mute/Unmute
Full screen
Increase volume
Decrease volume
Visit WindowsMedia.com
Skip to the beginning of
the current file or to the
previous file
Skip to the next file
Play/Pause
About the screens and menus
Windows Media® Player Mobile has three primary screens:
•
•
•
Playback screen. The screen that displays the playback controls (such as Play,
Pause, Next, Previous, and Volume) and the video window. You can change
the appearance of this screen by choosing a different skin.
Now Playing screen. The screen that displays the Now Playing playlist. This
special playlist indicates the current file being played and any files that are
“queued up”to play next.
Library screen. The screen that lets you quickly find your audio files, video
files, and playlists. It contains categories such as My Music, My Videos, My TV,
and My Playlists.
Experiencing Multimedia ꢀ1ꢁ
At the bottom of each screen, you can open a Menu. The commands on this menu
vary, depending on which screen you are viewing. For more information about the
commands in these menus, see Help on your device.
Synchronize video and audio files
Use the latest version of Windows Media® Player on your computer to synchronize
digital media files from your computer to your device. This ensures that protected
files and album art (for skins) are copied to your device correctly.
To synchronize content to your device automatically
1. On your computer, open Windows Media® Player, then connect your device to
your computer.
2. In the Device Setup Wizard, select Yes, search my computer now.
Note If you have previously opened Windows Media® Player and searched for media
on your computer, you will not be prompted to search your computer in Step ꢀ.
3. On the Device Setup dialog box, enter a name for your device and click
Finish.
Note If you installed a storage card that has a capacity of more than 4GB and
your entire library can fit into the storage card, Windows Media Player will
automatically synchorize your music files. The device also needs to be set to
Disk Drive mode for Windows Media Player to automatically synchronize.
4. On the left panel of Windows Media® Player, right-click the name of your
device and click Set Up Sync.
Note To set up media synchronization on a storage card, right-click Storage Card in the
left panel of Windows Media® Player, then click Set Up Sync.
5. Select the playlist(s) that you want to sync between your computer and
device, then click Add.
Note On the Device Setup dialog box, make sure that the Sync this device
automatically check box is selected.
6. Click Finish.
ꢀ14 Experiencing Multimedia
The files will begin synchronizing to your device. The next time you connect your
device to your computer while Windows Media® Player is running, synchronization
will start automatically.
To synchronize content manually to your device
1. If you have not set up media synchronization between your device and
computer, follow steps 1 to ꢁ in “To synchronize content to your device
automatically”.
2. Click the Sync tab on the Windows Media® Player of your computer. Select a
Playlist or a Library on the left panel of the Windows Media® Player.
3. From the Content List, drag the media files that you want to sync to your
device and drop them to the Sync List.
Playlists and Library List
Content List
Sync List
4. Click Start Sync to start synchronizing the selected files to your device.
Experiencing Multimedia ꢀ15
Notes
•
•
Use Windows Media® Player 11 or higher on your computer to synchronize media
files to your device.
Audio files copy faster if Windows Media® Player is configured to automatically set
the quality level for audio files copied to your device. For more information, see the
Windows Media® Player Help.
Play media
Use the Library to find and play songs, videos, and playlists that are stored on your
device or an installed storage card.
To update the Library
1. If you are not on the Library screen, tap Menu > Library.
2. On the Library screen, tap the Library arrow (near the top of the screen), then
tap the media storage that you want to use, for example, Storage Card.
3. In most cases, Windows Media® Player Mobile automatically updates the
library. However, you can manually update the library to ensure that it
contains new files that you recently copied to your device or storage card.
Tap Menu > Update Library to manually update the library list.
To play video and audio files on your device
1. Select a category (for example, My Music or My Playlists).
2. Tap and hold the item that you want to play (such as a song, album, or artist
name), then tap Play.
Tips
•
To play a media file that is stored on your device but is not in a library, on the
Library screen, tap Menu > Open File. Tap and hold the item that you want to play
(such as a file or a folder), then tap Play.
•
To play a media file from the Internet or a network server, tap Menu > Library then
tap Menu > Open URL.
ꢀ1ꢂ Experiencing Multimedia
Playlists
In Windows Media® Player Mobile, you can create a new playlist by saving the
current Now Playing playlist and giving it a new name.
To save a new playlist
1. If you are not on the Library screen, tap Menu > Library.
2. Tap to select a category (for example, My Music or My Playlists).
3. Select a media file that you want, then tap Menu > Queue Up. This adds the
file to the Now Playing list.
Repeat this step until you have added all desired media files to the Now
Playing list.
Note You cannot select multiple files simultaneously.
4. After adding the media files, tap Menu > Now Playing.
5. On the Now Playing screen, tap Menu > Save Playlist.
6. Enter the playlist name, then tap Done.
7. To play back the playlist you created, tap My Playlists in the Library, select
your playlist, then tap Play.
Troubleshooting
If you encounter a problem while using the Windows Media® Player Mobile, a
number of resources are available to help you troubleshoot the issue.
For more information, see the Troubleshooting Windows Media® Player
Mobile page at the Microsoft web site (http://www.microsoft.com/windows/
windowsmedia/player/windowsmobile/troubleshooting.aspx).
Experiencing Multimedia ꢀ1ꢃ
11.4 Using FM Radio
FM Radio allows you to listen to FM radio stations on your device. Since FM Radio
uses the provided stereo wired headset as an antenna, you must plug in the
headset first onto the earphone jack of your device before you open the program.
To open FM Radio
Tap Start > Programs > FM Radio.
The first time this program is used, it will automatically scan for available FM
channels in your area, save them as presets, then play the first FM station found. For
information about saving favorite stations as presets, see “Save presets.“
When you tap
on the FM Radio screen, the program continues to run in the
background and allows you to continue listening to the radio while you use other
programs. To turn off the FM radio, tap
Radio screen.
on the upper right corner of the FM
FM Radio controls
1
2
10
3
4
9
8
5
6
7
ꢀ18 Experiencing Multimedia
This control
1
Does this
Turns off FM radio.
2
See “Radio display”for details.
Searches the FM band for the next higher FM channel.
Increases the radio frequency by 0.1MHz.
Turns the sound on or off.
3
4
5
Allows you to save up to six favorite FM stations as presets. Tap a
button to tune in to a favorite station.
6
7
Switches between headset and speaker output.
Allows you to switch between Mono and Stereo modes.
Decreases the radio frequency by 0.1MHz.
Stereo/Mono
8
9
Searches the FM band for the next lower FM channel.
10
Tip
Tap Menu to choose more options for FM Radio, such as Scan & Save to perform a
rescan of the FM band for available FM stations and save them as presets, and more.
Experiencing Multimedia ꢀ19
Radio display
Shows the status of FM Radio.
1
2
1
2
Shows the preset number when you select a
preset FM station.
Shows the received signal strength.
Shows the radio frequency.
3
4
3
4
Device controls used in FM Radio
Navigation
•
Press NAVIGATION Left/Right to search the FM band for the next lower/higher
FM channel. When the search reaches the last station, it cycles back to the
beginning of the FM band.
•
•
Press NAVIGATION Up/Down to select the previous/next available preset
station.
Press the ENTER button to toggle mute on and off.
Volume Control
Press the VOLUME CONTROL on the side of the device to adjust the FM Radio
volume.
Save presets
Presets are favorite FM stations that you can save for easy access. You can save up to
six FM stations to the preset buttons on the main FM Radio screen, or save up to ꢀ0
presets on the Presets screen.
ꢀꢀ0 Experiencing Multimedia
To save FM stations
1. Tune to the desired FM frequency, then tap Presets.
2. On the Presets screen, tap that appears on the desired preset number
where you want to save the FM station.
You can save up to ꢀ0 preset radio stations. Radio stations that are saved on
Presets 1 to ꢂ can be accessed on the main FM Radio screen.
Tip
Tap
to remove a favorite FM station from the list.
3. When done, tap OK.
To listen to a preset FM station
Do one of the following:
•
On the main FM Radio screen, tap the preset button that shows your favorite
station.
•
On the Preset screen, select a preset number that shows your favorite station,
then tap Listen.
FM Radio Main Menu
Tap Menu on the FM Radio screen to access options for the FM Radio program.
•
Scan & Save Automatically scan radio stations that can be picked up by the
device and save them as presets. Existing presets will be cleared and replaced
with the newly scanned radio stations. You can have a maximum of ꢀ0 preset
radio stations.
•
Stereo Toggles between using Stereo or Mono mode when listening to an FM
radio station.
•
•
Mute Toggles between muting and restoring the volume.
Output Select whether to use the device Speaker or Wired Headset to listen
to the radio.
Experiencing Multimedia ꢀꢀ1
•
•
Sleep Set how much time must pass before FM Radio goes into sleep mode.
The Sleep option is switched to Off every time you launch FM Radio.
Exit Select to turn off FM Radio.
11.5 Using Audio Booster
Audio Booster optimizes sound for a better listening experience. It provides preset
moods, such as hip hop, jazz, rock, etc., and several enhancement presets that suit
different types of music.
To access Audio Booster
Tap Start > Programs > Audio Booster.
This control
Does this
1
2
3
On
Select the check box to enable or
disable the equalizer.
Frequency
band
Drag the sliders to adjust the
frequency.
1
2
5
4
Menu
• Tap Menu > Cancel to exit Audio
Booster without applying the
modified settings.
• Tap Menu > Save as Preset or
Delete Preset to save or delete
preset equalizer settings.
4
5
Done
Tap to apply the modified settings.
Equalizer
presets
Tap to choose the Equalizer preset
to use.
3
To use a Equalizer preset
Tap the list box then select a desired preset.
ꢀꢀꢀ Experiencing Multimedia
To create a custom equalizer preset
1. Adjust the frequency bands to your desired values by dragging the equalizer
controls. The selected values are indicated on top of the sliders.
2. Save your equalizer settings as a preset by tapping Menu > Save as Preset.
3. Enter a preset name and then tap Done. The preset you created will be added
to the list box.
To delete a custom equalizer preset
1. Tap the list box then select the Equalizer preset you want to delete.
2. Tap Menu > Delete Preset.
Note
You can only delete custom equalizer presets. Equalizer presets that are pre-installed
cannot be deleted.
11.6 Using MP3 Trimmer
Use MP3 Trimmer to trim MPꢁ files. You can choose to save it as a new file or set it
as a ring tone.
Start and End Points
Set the part of the music that
Title
Duration
will be used as the ring tone.
Drag the left handle to set the
start time, then drag the right
handle to set the end time.
Playback time
Play/Stop
Start Point / End Point
To set the start and end
points more precisely, you
can also tap these controls
to step backward/forward
one step.
Experiencing Multimedia ꢀꢀꢁ
To trim the MP3 file
1. Tap Start > Programs > MP3 Trimmer.
2. Tap Open to find the MPꢁ file in the device or storage card.
3. On the MPꢁ Trimmer screen, use the stylus to adjust the Start Point and
End Point.
After you set the Start Point, the song will play back starting from the start
point.
After you set the End Point, the song will play back starting from 5 seconds
before the end point.
4. Tap Play to play back the trimmed song.
5. Tap Menu and select to whether set the file as the default ring tone, save the
file to the ring tone folder, or save it using another file name.
Tip
If you only want to save the song to the ring tone folder for future use, tap
Save to Ring Tone Folder. Later on, you can tap Start > Settings >
Personal tab > Phone to set it as your ring tone.
ꢀꢀ4 Experiencing Multimedia
Chapter 12
Programs
12.1 Programs on your Device
12.2 Adding and Removing Programs
12.3 Adobe® Reader® LE
12.4 Calendar
12.5 Contacts
12.6 Comm Manager
12.7 JETCET™ PRINT
12.8 Microsoft® Office Mobile
12.9 Notes
12.10 JBlend
12.11 SIM Manager
12.12 Spb GPRS Monitor
12.13 Sprite Backup
12.14 Tasks
12.15 Voice Commander
12.16 Voice Recorder
12.17 WorldCard Mobile
12.18 ZIP
ꢀꢀꢂ Programs
12.1 Programs on your Device
The following are programs you can find on your device or install from the
Application disc.
Programs in the Start Menu
Icon
Description
Office Mobile Use the complete suite of Microsoft® Office applications for your
mobile device.
Excel Mobile Create new workbooks or view and edit Excel workbooks.
OneNote Mobile Create notes with text, photos, and voice recordings.
PowerPoint Mobile View PowerPoint slides and presentations.
Word Mobile Create, view, and edit Word documents.
Calendar Keep track of your appointments and create meeting requests.
Contacts Keep track of your friends and colleagues.
Internet Explorer Mobile Browse web and WAP sites as well as download new
programs and files from the Internet.
Messaging Send and receive e-mail, MMS, and text messages.
Phone Make and receive calls, switch between calls, and set up conference
calling. See Chapter ꢀ for details.
Help See Help topics for the current screen or program.
Programs ꢀꢀꢃ
Programs screen
Icon
Description
Games Play these pre-installed games: Bubble Breaker, Teeter and Solitaire.
ActiveSync Synchronize information between your device and a PC or the
Exchange Server. See Chapter 5 and ꢃ for details.
Adobe Reader LE View PDF (Portable Document Format) files on your device.
Album View photos and videos that you captured using the device camera. See
Chapter 11 for details.
Audio Booster Enhances your music experience by providing you with controls
for adjusting equalizer, ꢁD sound, treble, and bass settings. See Chapter 11 for
details.
Bluetooth Explorer Search for other Bluetooth devices that have file sharing
enabled and access their Bluetooth shared folder. See Chapter 9 for details.
Calculator Perform basic arithmetic and calculations, such as addition,
subtraction, multiplication, and division.
Camera Take photos and shoot video clips with accompanying audio. See
Chapter 11 for details.
Comm Manager Manage your device’s connections (including Internet and
Bluetooth), turn the phone on or off, and enable or disable the Direct Push
function.
File Explorer Organize and manage files on your device.
FM Radio Listen to your favorite FM radio stations. See Chapter 11 for details.
Getting Started View a list of “how to’s”that you can reference to learn basic
features and settings of your device.
ꢀꢀ8 Programs
Icon
Description
Internet Sharing Connect your notebook computer to the Internet using your
device's data connection. See Chapter 8 for details.
JBlend Download and install Java applications, such as games and tools, on your
device.
JETCET PRINT Print documents, image files, e-mails, web pages and more from
your device.
Messenger This is the mobile version of Windows Live™ Messenger. See Chapter
8 for details.
MP3 Trimmer Trim MPꢁ files, and choose to save the trimmed music as a new file
or set it as a ring tone. See Chapter 11 for details.
Notes Create handwritten or typed notes, drawings, and voice recordings.
Opera Mobile This is the mobile version of the Opera browser. See Chapter 8 for
details.
Pictures & Videos View, organize, and sort pictures, animated GIFs, and video
files on your device or a storage card.
QuickGPS Download satellite data over the Internet via ActiveSync (if your device
is connected to a computer), Wi-Fi or a data connection to speed up the time for
determining your current GPS position. See Chapter 10 for details.
Remote Desktop Mobile Connect and control your desktop computer remotely
from your device.
RSS Hub Download and read the latest web feeds from the Internet. See Chapter
8 for details.
Search Search contacts, data, and other information on your device.
SIM Manager Manage the contacts that are stored on your SIM card. You can also
use this program to copy SIM contents to Contacts on your device.
Programs ꢀꢀ9
Icon
Description
Spb GPRS Monitor Use this program to measure the amount of data transfers
that you have made via the GPRS or GSM network connection, and calculate
network usage costs. You can install this program from the Application disc.
Sprite Backup Back up your device’s data and files to a specified folder, a storage
card, or a computer. You can install this program from the Application disc.
Streaming Media Stream live or on-demand video. See Chapter 8 for details.
Tasks Keep track of your tasks.
Voice Commander Call contacts, dial phone numbers, open programs,
check appointments, play music, and more by simply using your voice.
Voice Recorder Record your voice and send it via e-mail, MMS or beaming. You
can also set the recorded voice as your ring tone.
Windows Live Use this mobile version of Windows Live™ to find information
on the web. It also lets you sign into your Windows Live account so that you
can access your Live Mail messages and send/receive instant messages in Live
Messenger. See Chapter 8 for details.
Windows Media Player Mobile Play back audio and video files. See Chapter 11
for details.
WorldCard Mobile Capture name cards using the device camera, and export the
name card information as a new contact in your Contacts list. You can install this
program from the Application disc.
YouTube™ Search for uploaded videos in YouTube and play them on your device.
See Chapter 8 for details.
ZIP Save memory and free up storage space on your device by compressing files
in the conventional ZIP format.
STK (SIM Tool Kit) Service Access information and other services offered by your
wireless service provider.
ꢀꢁ0 Programs
12.2 Adding and Removing Programs
Additional programs, such as the programs in the Application disc or other
programs that you purchase, can be installed and uninstalled on your device. Your
device does not allow you to uninstall most of the preinstalled programs.
Note
Before you purchase additional programs for your device, make sure that they are
compatible with your device.
To install a program
1. Download the program to your computer (or insert the CD or disk that
contains the program into your computer).
You may see a single *.exe file, a *.zip file, a Setup.exe file, or several versions
of files for different device types and processors. Be sure to select only the
programs designed for your device.
2. Read any installation instructions or documentation that comes with the
program. Many programs provide special installation instructions.
3. Connect your device to the computer.
4. Double-click the installation setup file.
To uninstall a program
1. Tap Start > Settings > System tab > Remove Programs.
2. In the Programs in storage memory list, select the program you want to
remove, then tap Remove.
Programs ꢀꢁ1
12.3 Adobe® Reader® LE
Adobe® Reader® LE is an application for viewing PDF (Portable Document Format)
documents on your device. It supports a subset of the features found in the PC
versions of Adobe Reader.
To open Adobe Reader LE
Tap Start > Programs > Adobe Reader LE.
To open a PDF file on your device
•
Open a PDF file in Adobe Reader LE; or
•
Open File Explorer, find the PDF file, then tap the file to open it.
To navigate through a PDF document
You can use the controls in the program and finger gestures to navigate a PDF
document.
•
Tap Tools > View > Continuous and then slide your finger up or down the
screen to scroll through the pages in the document.
Tip
You can also drag the scroll bars to scroll through the pages.
•
•
•
•
Tap to zoom in or
the screen to pan the current page.
to zoom out. After zooming in, slide your finger on
Press NAVIGATION Up/Down/Right/Left to move to the desired direction of
the page.
Tap to return to the previous page; tap to move to the next page. Tap
to jump to the first page; tap to jump to the last page.
Tap Tools > Go To > Page Number to enter a page number that you want to
view.
ꢀꢁꢀ Programs
To search for text in the document
1. Tap Tools > Find > Text or tap in the toolbar.
2. Type in the text to be searched, then tap Find.
The matched text in the document will be highlighted.
3. To view the next occurrence of the text, tap Tools > Find > Next.
Tips
•
Adobe Reader LE displays a bookmark pane for the PDF files that contain
bookmarks. Tap the bookmarks to go to a specific section/page within the file.
•
Adobe Reader LE supports password-protected PDF files with up to 1ꢀ8-bit
encryption. When you open a password-protected PDF file, you will be prompted
to enter the password before opening it.
12.4 Calendar
Use Calendar to create appointments, including meetings and other events. You
can also synchronize Calendar appointments between your device and computer.
To open the Calendar screen
•
On the TouchFLO ꢁD Home screen, tap Calendar or a displayed appointment;
or
•
Tap Start > Calendar.
Create appointments
To schedule an appointment
1. Open the Calendar screen and then tap Menu > New Appointment.
2. Enter a name for the appointment.
3. Do one of the following:
•
If it is a special occasion such as a birthday or a whole-day event, set the
All Day option to Yes.
Programs ꢀꢁꢁ
If there is a time frame for the appointment, set the start and end dates
and times.
•
4. Specify the type of category for your appointment, so that it can be grouped
with other related appointments. Tap Categories, then select a preset
category (Business, Holiday, Personal, or Seasonal), or tap New to create your
own category.
5. When finished, tap OK to return to the calendar.
Notes
•
All-day events do not occupy blocks of time in Calendar; instead, they appear in
banners at the top of the calendar.
•
To remove an appointment, tap Menu > Delete Appointment.
Tip
To have the time entered automatically in Day view, tap and drag to select a time slot
for the new appointment, and tap Menu > New Appointment.
To set the reminder time for new appointments
By default, Calendar has been set to display a reminder alert when you have new
upcoming appointments. You can change the reminder time.
1. Open the Calendar screen.
2. Tap Menu > Tools > Options > Appointments tab.
3. Make sure the Set reminders for new items check box is selected.
4. Set the time when you want the reminder to alert you.
5. Tap OK to return to the Calendar screen.
ꢀꢁ4 Programs
View appointments
By default, Calendar displays appointments in Agenda view. You can also look at
your appointments in Day, Week, Month, and Year views.
The highlighted hours
here indicate the time of
your appointments.
The red arrows
indicate that there
are conflicting
appointments.
Tap to view appointment
details.
Tap to switch views.
Agenda view
•
•
To see detailed appointment information in any view, tap the appointment.
To view appointments by category, tap Menu > Filter, then select the desired
category.
•
•
To change the default view that Calendar uses to display appointments, tap
Menu > Tools > Options > General tab. Tap the Start in box, then choose
the calendar view.
When in Month view, you will see the following indicators:
Morning appointment
Afternoon or evening appointment
Both morning and afternoon/evening appointments
All-day event
Programs ꢀꢁ5
Send appointments
To send a meeting request
Use Calendar to schedule meetings via e-mail with contacts who use Outlook or
Outlook Mobile.
1. Open the Calendar screen.
2. Schedule a new appointment, or open an existing one and tap Menu > Edit.
3. Tap Attendees, then tap Add Required Attendee or Add Optional
Attendee and add the contacts whom you want to invite.
Note You can specify if an attendee is required or optional only if your device is
connected to a Microsoft Exchange ꢀ00ꢃ server. Otherwise, all attendees are
designated as required. For more information, see “Managing Meeting Requests”
in Chapter ꢃ.
4. When you have finished adding attendees, tap Done.
5. Tap OK to send.
Tip
To choose the e-mail account to use for sending meeting requests, tap Menu > Tools
> Options > Appointments tab. Tap the Send meeting requests via box and choose
to send via your Outlook E-mail, POPꢁ/IMAP4 or Windows Live™ account.
Notes
•
If you’re sending the meeting request using your Outlook E-mail account, it will
be sent to the attendees the next time you synchronize your device with your
computer or Exchange Server.
•
When attendees accept your meeting request, the meeting is automatically
added to their schedules. When their response is sent back to you, your calendar is
updated as well.
To send appointment details as a vCalendar
A vCalendar is a standard file format used for exchanging scheduling and task
information. vCalendar files can be exported to Outlook on the computer.
After selecting the appointment to send in the Calendar screen, tap Menu >
Send as vCalendar to send a vCalendar containing appointment details as a file
attachment in an MMS message. For more information, see “MMS”in Chapter ꢂ.
ꢀꢁꢂ Programs
12.5 Contacts
Contacts is your address book and information storage for people and businesses
you communicate with. You can add the following types of contacts to your device:
•
•
•
Outlook contacts. Contacts that are stored on your device, which can be
created on your device or synchronized with your PC or the Exchange Server.
SIM contacts. Contacts that are stored on the SIM card. Only a name and
phone number can be stored for each entry.
Windows Live™ contacts. Contacts that you communicate with using
Windows Live™ Messenger or MSN.
Note You can only add Windows Live™ contacts after you have set up Windows Live™
on your device. See “Add Windows Live contacts”in Chapter 8 for details.
To open the Contacts screen
Do one of the following:
•
•
On the TouchFLO ꢁD Home screen, slide to the People tab and then tap All
People; or
Tap Start > Contacts.
Add new contacts
To add a contact on your device
1. Open the Contacts screen.
2. Tap New, select Outlook Contact, and enter the contact information.
Programs ꢀꢁꢃ
3. In the File as field, choose how you want the
contact name to appear in the contact list.
4. To add a photo of the contact, tap Select a
picture, and then select the picture file or tap
Camera to take a photo of the contact.
5. To assign a ring tone to the contact, tap the
Ring tone field, scroll through the list of tones,
then select a desired tone.
6. When finished, tap OK.
Tips
•
If a person who is not in your list of contacts called you and you want to save that
person’s phone number, tap and hold the phone number in the Call History and
then tap Save to Contacts from the shortcut menu.
•
•
To save a phone number that is contained in a message, open the message, tap the
underlined phone number, and then tap Menu > Save to Contacts.
To edit contact information, tap the contact name and then tap Menu > Edit.
To add a contact to your SIM card
1. Open the Contacts screen.
2. Tap New, then select SIM Contact.
3. Enter a contact name and phone number.
4. Tap OK.
Tip
You can also use the SIM Manager to add and edit contacts on your SIM card. For
more information, see "SIM Manager" in this chapter.
ꢀꢁ8 Programs
Organize and search contacts
To group similar contacts
For easier management, you can group similar contacts by assigning them to
categories.
1. Create a new Outlook contact or edit an existing Outlook contact.
2. Tap Categories.
3. Select a preset category such as Business or Personal, or tap New to create
your own category.
4. When finished, tap OK.
To find a contact on your device
There are several ways to find a contact when your contact list is long:
•
•
Begin entering a contact name in the provided text box until the contact you
want is displayed.
On the Quick Scroll bar on the right
of the Contacts screen, scroll to or
Quick
Scroll
bar
tap a letter to go directly to the part
of the contacts list where contact
names start with that letter.
Note You can disable the Quick
Scroll bar by tapping Menu >
Options and selecting the Show
alphabetical index check box.
This will show the alphabetical
index at the top of the Contacts
list.
•
Filter the list by categories. In the contact list, tap Menu > Filter, then tap
a category you’ve assigned to a contact. To show all contacts again, select
Menu > Filter > All Contacts.
Programs ꢀꢁ9
Share contact information
To beam a contact’s details
You can quickly send contact information to another mobile phone or device
through Bluetooth beaming.
1. On the Contacts screen, select a contact.
2. Tap Menu > Send Contact > Beam, then select a device where to beam the
contact to.
Note
Before beaming, make sure Bluetooth is turned on and set to visible mode on your
device and the target mobile device. You can also beam contact information to your
computer. See Chapter 9 for details.
To send contact information via text messaging
1. On the Contacts screen, select a contact.
2. Tap Menu > Send Contact > SMS \ MMS.
3. Select the contact information you want to send, then tap Done.
4. In the new text message, enter the mobile phone number of the recipient,
then tap Send.
To send contact information as a vCard
A vCard (virtual business card) is a standard file format used for exchanging contact
information. vCard files can be exported to Outlook on the computer. From your
device, you can send a vCard containing contact information as file attachment in
an MMS message.
1. On the Contacts screen, select a contact.
2. Tap Menu > Send as vCard.
3. A new MMS message is created with the vCard file attached. Enter the mobile
phone number or e-mail address of the recipient, then tap Send.
For more information, see “MMS”in Chapter ꢂ.
ꢀ40 Programs
12.6 Comm Manager
Comm Manager is a central location where you can easily turn on and off the
communication features of your device such as the phone, Wi-Fi, data connection,
Bluetooth, and more.
To access the Comm Manager
Do one of the following:
•
On the TouchFLO ꢁD Home screen, slide to the Settings tab and then touch
Communications.
•
•
Touch Start > Programs > Comm Manager.
Touch Start > Settings > Connections tab > Comm Manager.
1
2
3
4
5
6
1
Switch Airplane Mode on or off. Turning on Airplane Mode turns off the phone, Wi-Fi and
Bluetooth functions. For more information, see "To enable or disable Airplane Mode" in
Chapter ꢀ.
2
3
Switch the phone on or off. Tap Settings > Phone to set the ring tone and other phone
settings. See Chapter 1ꢁ for details.
Switch Bluetooth on or off. Tap Settings > Bluetooth to configure Bluetooth on your
device. See Chapter 9 for details.
Programs ꢀ41
4
5
6
Switch Wi-Fi on or off. Tap Settings > Wireless LAN to configure wireless network
connection settings. See Chapter 8 for details.
Switch between automatically receiving (as items arrive) or manually retrieving Outlook
e-mails. See Chapter ꢃ for details.
Disconnect active data connections (GPRS, for example). You cannot reconnect a data
connection in Comm Manager.
12.7 JETCET™ PRINT
JETCET PRINT lets you print image files or documents from your device straight to
a Bluetooth or network printer. You can also print e-mails, e-mail attachments, web
pages, appointments, contacts, and tasks.
Tip
For more information about JETCET PRINT, consult the JETCET PRINT help in your
device by tapping Menu > Help > Contents in the JETCET PRINT screen.
Open JETCET PRINT
Tap Start > Programs > JETCET PRINT.
Tap to select an
image to print.
Tap to select an e-mail, e-mail attachment,
appointment, calendar, or task to print.
Tap to set up a printer
or change the printer
settings.
Tap to select a
document to print.
Tap to view and select
additional tools or options.
ꢀ4ꢀ Programs
Set up a printer
You must configure your device to connect to a printer before you can start
printing.
1. Tap Start > Programs > JETCET PRINT.
2. If you are not in the Settings tab, tap the settings button (
Tap Add Network Printer to set up and connect to a shared network
printer.
), then:
•
Note The device will wait continuously if you have entered an incorrect IP address
while setting up a network printer.
•
Tap Add Bluetooth Printer to set up and connect to a Bluetooth printer.
Note
To learn how to set up a printer, refer to the JETCET PRINT help on your device.
Print a file
1. Tap Start > Programs > JETCET PRINT.
2. Locate and select the type of file that you want to print (document, image, or
e-mail/PIM) by tapping the corresponding tabs on the left side of the screen.
3. Tap and hold the file that you want to print, then tap Print on the menu.
4. Select a printer in the Choose a Printer list box, select the paper size, then
tap Next.
5. Choose the page layout in the list, then tap Next to print the file.
Tip
You can also print document and image files from File Explorer. To print, use File
Explorer to locate the file you want to print. Tap and hold the file, then tap Print on
the pop up menu.
Programs ꢀ4ꢁ
Print a web page
1. Open your web browser and go to the web page that you want to print.
2. Tap and hold the screen, then tap Print on the menu.
3. Select a printer in the Choose a Printer list box, select the paper size, then
tap Next to print the web page.
12.8 Microsoft® Office Mobile
Microsoft® Office Mobile consists of the following applications:
•
•
Microsoft® Office Excel® Mobile lets you create and edit Excel workbooks
and templates on your device.
Microsoft® Office OneNote® Mobile lets you create notes with text,
photos, and voice recordings for synchronization later with Microsoft® Office
OneNote® ꢀ00ꢃ on your computer.
•
•
Microsoft® Office PowerPoint® Mobile allows you to view (not create) slide
show presentations in *.ppt and *.pps formats.
Microsoft® Office Word Mobile lets you create and edit documents and
templates in Word Mobile and save them as *.doc, *.rtf, *.txt, and *.dot files.
To use Microsoft Office Mobile
1. Tap Start > Office Mobile.
2. Tap the Office Mobile application that you want to use.
ꢀ44 Programs
When working with Word Mobile and Excel Mobile files, you can use the Navigation
Control on your device for zooming:
To zoom out,
slide your finger counterclockwise
around the Navigation Control.
To zoom in, slide your
finger clockwise around the
Navigation Control.
Word Mobile and Excel Mobile do not fully support some features of Microsoft®
Office Word and Microsoft® Office Excel®. To see a complete list of features that are
not supported in Word Mobile and Excel Mobile, see Help on your device.
Tips
•
By default, Word Mobile saves documents in .docx format, while Excel Mobile
saves workbooks in .xlsx format. If you want to open these types of files on
a computer that uses Microsoft Office ꢀ000, Office XP, or Office ꢀ00ꢁ, you
need to download and install the File Format Converter in your computer.
You can find this converter at http://www.microsoft.com/downloads/details.
aspx?FamilyId=941Bꢁ4ꢃ0-ꢁAE9-4AEE-8F4ꢁ-CꢂBBꢃ4CD14ꢂꢂ&displaylang=en.
•
•
If you want Word Mobile to save documents in .doc format, tap Menu > Tools >
Options (or Menu > Options when no document is opened), then change the
Default template to Word 97-2003 Document (.doc).
If you want Excel Mobile to save workbooks in a format that is compatible with
Microsoft Office ꢀ000, Office XP, or Office ꢀ00ꢁ, tap Menu > Options (with no
workbook opened), then change the Template for new workbook to Blank 97-
2003 Workbook.
Programs ꢀ45
12.9 Notes
Using Notes, you can create handwritten and typed notes, record voice notes,
convert handwritten notes to text for easy readability, and more.
To create a note
1. Tap Start > Programs > Notes. In the note list, tap New.
2. Choose an input method and then enter your text.
Tip
For more information about input methods and entering text, see Chapter 4.
3. When finished, tap OK to save and return to the note list.
Notes
•
To select handwritten text, tap and hold next to the writing. As soon as dots
appear, and before they form a complete circle, quickly drag across the writing.
•
If a letter crosses three ruled lines, it is treated as a drawing rather than text.
To draw in a note
1. Create or open a note file.
2. Use the stylus to draw on the screen. A selection
box then appears around your drawing.
3. Tap OK to save.
Note
To select a drawing (for example, to copy or delete
it), tap and hold the drawing briefly. When you lift
the stylus, the drawing is selected.
ꢀ4ꢂ Programs
To record a voice note
You can create a stand-alone recording (voice note) or you can add a recording to
a note.
1. Tap Start > Programs > Notes.
2. If you do not see the Recording toolbar, tap Menu > View Recording
Toolbar.
3. Do one of the following:
•
To add a recording to a note, create or open a note.
•
To create a stand-alone recording, record from the note list.
4. Tap the Record icon (
) to begin recording your voice. Tap the Stop icon (
) when you are finished recording.
Tip
To select the voice recording format, return to the note list and then tap Menu >
Options > Global Input Options link (at the bottom of the Options screen). On the
Input screen, tap the Options tab and choose the desired format from the Voice
recording format list.
12.10 JBlend
MIDlets are Java applications such as games and tools that can run on mobile
devices, while a MIDlet suite is a collection of one or more MIDlets. The JBlend
program lets you download, install and manage MIDlets or MIDlet suites on your
device. Your device supports Java ꢀ Micro Edition, JꢀME.
To open the Java program
Tap Start > Programs > JBlend.
Install and launch MIDlets or MIDlet suites
There are two ways to install a MIDlet or MIDlet suite:
Programs ꢀ4ꢃ
To download and install via Internet Explorer Mobile
1. On the JBlend screen, tap Install > Download to open Internet Explorer
Mobile.
2. Locate the MIDlet or MIDlet suite while connected to the Internet.
3. Select the MIDlet or MIDlet suite to download.
4. Information about the MIDlet or MIDlet suite is then displayed. Tap Continue.
5. Confirm to start downloading and the installation.
To install from your device
You can copy MIDlets or MIDlet suites from the PC to your device using the USB
sync cable or Bluetooth connection. Copy them to the root folder or any subfolder
on your device.
1. On the JBlend screen, tap Install > Local Install. The program then searches
for MIDlets or MIDlet suites on your device and displays them in a list.
2. From the list, tap the MIDlet or MIDlet suite that you want to install.
3. Tap Yes to confirm and start the installation.
To run a MIDlet or MIDlet suite
Do one of the following:
•
•
After installation of the MIDlet or MIDlet suite is complete, tap Yes.
On the JBlend screen, tap the MIDlet or MIDlet suite.
To stop running a MIDlet or MIDlet suite
Tap Exit or Quit on the MIDlet’s or MIDlet suite’s screen or menu.
Manage MIDlets and MIDlet suites
You can organize MIDlets and MIDlet suites into folders for easy identification,
renaming, updating, and more. If the device memory is full, uninstall some MIDlets
or MIDlet suites to free up memory space.
ꢀ48 Programs
To update a MIDlet or MIDlet suite
On the JBlend screen, select a MIDlet or MIDlet suite and then tap Menu >
Application > Update Info. JBlend will search for updates for the selected MIDlet or
MIDlet suite where it was installed from before.
To remove a MIDlet or MIDlet suite
Before you uninstall a MIDlet, make sure that it is not running.
1. On the JBlend screen, tap and hold the MIDlet and then tap Delete.
Alternatively, you can tap Menu > Application > Delete.
2. Tap Yes to confirm.
Note
To uninstall all MIDlets and folders from the current folder, tap Menu > Application >
Delete All.
To configure the MIDlets environment setting
On the JBlend screen, tap Menu > Java Settings, and then clear the Backlight
always on check box to minimise the power consumption.
To set MIDlet permission settings
For each MIDlet already installed, Java allows you to individually set permission
options to perform certain actions. You can set permission options for performing
each action by following these steps:
1. On the JBlend screen, tap and hold a MIDlet and then tap Permissions, or tap
Menu > Application > Permissions.
2. For each action, choose one of the following permission options:
•
•
Never. Prohibits a MIDlet from performing the action.
Allow and ask me next time. Asks for your confirmation whenever a
MIDlet attempts to perform the action.
3. Tap OK.
Note
Changes to permission settings for a MIDlet in a multi-MIDlet suite will affect the
settings for the whole suite.
Programs ꢀ49
12.11 SIM Manager
SIM Manager allows you to view the contents of your SIM card, transfer contacts
from your SIM card to your device or vice versa, and make a call to a SIM contact.
To create a contact on your SIM card
1. Tap Start > Programs > SIM Manager.
2. Tap New and enter a contact name and phone number.
3. Tap Save to save the information on your SIM card.
Tip
To change contact information on your SIM card, tap a SIM contact, edit the
information, and then tap Save.
To copy SIM contacts to your device
If you have saved contacts on your SIM card, you can copy them into Contacts on
your device.
1. On the SIM Manager screen, select the desired contact, or select all SIM
contacts by tapping Menu > Select All.
2. Tap Menu > Save to Contacts.
To copy contacts to the SIM card
Only one phone number per contact name can be stored on a SIM card. When you
copy a contact that has several phone numbers to your SIM card, SIM Manager
saves each number under a separate name.
To save each number under a different contact name on the SIM card, SIM Manager
appends an indicator at the end of each name.
By default, /M, /W and /H are appended to indicate mobile, work and home phone
numbers respectively. You can edit this indicator first before you start copying
contacts to your SIM card. Indicators of the other types of phone numbers are left
empty for you to define them.
1. On the SIM Manager screen, tap Menu > Tools > Options.
ꢀ50 Programs
2. Select the check boxes of the types of phone numbers that you want to be
added to the SIM card.
3. Under the Mark column, you can change the
indicator that will be appended to the SIM
contact names for each phone number type. To
do so, select a phone type, tap Edit, enter your
desired indicator, then tap Save.
4. After modifying, tap OK.
5. Tap Menu > Contacts to SIM.
6. Select the check boxes of the contact’s phone
numbers that you want to copy to your SIM
card, then tap Save.
To store your SIM card’s phone number
1. On the SIM Manager screen,
When your phone
number is stored
on the SIM card,
it will appear on
the SIM Manager
screen.
tap Menu > Tools > List of
Own Numbers.
2. Tap Voice Line 1.
3. Change the name, if desired,
then enter your mobile phone
number.
4. Tap Save.
Programs ꢀ51
12.12 Spb GPRS Monitor
Using Spb GPRS Monitor, you can monitor how much data you have sent and
received on your device, and check the network usage costs by taking into account
your service plan details. You can also view connection cost and traffic charts,
generate reports of network connection usage, and export reports to CSV files for
use with Microsoft® Office Excel® and Access.
Install GPRS Monitor
The GPRS Monitor program is included in the Application disc. To install it onto
your device, run the program’s installer on your computer. Follow the on-screen
instructions on your computer and your device to complete the installation.
The GPRS Monitor icon and pop-up window
You can enable the GPRS Monitor icon to be shown on the title bar. This icon shows
the data connection or dial-up connection speed, data traffic, and battery status.
To show the GPRS Monitor icon on the title bar
1. Tap Start > Programs > Spb GPRS Monitor.
2. Tap Tools > Options > Icon tab.
3. Select the Show taskbar icon check box.
By default, the GPRS Monitor icon shows three bars that represent the following
status information:
Icon Bar ꢀ: Traffic
(Full bar corresponds to
100%. Each bar is ꢀ0%.)
Icon Bar ꢁ: Battery
(Each bar corresponds to
ꢀ0% of the total charge.)
Icon Bar 1: Speed
(Full bar corresponds
to 19KB/sec.)
ꢀ5ꢀ Programs
When you tap the GPRS Monitor icon on the title bar,
a pop-up window opens and shows you detailed
statistics about your data transfers, such as the
data size you have just transferred and its cost, the
allowable amount of data that you can transfer, and
more.
Set up monitoring and notification
To select the connection to be monitored
1. On the GPRS Monitor screen, tap Tools > Options > Connection tab.
2. Select the Enable connection monitoring check box.
3. In the Connection list, select the connection you want to monitor.
To enter your service plan details
Service plan details, or tariffs, determine the price that you pay for your data
transfers. The tariff may either be flat rate or time-based, depending on whether
you’re using GPRS or a phone dial-up connection for data transfers.
Contact your wireless service provider to find out about your tariff, and enter the
information in the Tariff tab or the Tariff Details tab on the Options screen.
Note
The calculation of network usage costs is based on the information that you entered,
and is only an estimate. The actual amount billed by your service provider may differ.
Programs ꢀ5ꢁ
To set up traffic limit notifications
You can set up traffic limit notifications if you want to be notified when a traffic limit
is reached.
1. On the GPRS Monitor screen, tap Tools > Options.
2. Enable the notifications on the Day Warn and Month Warn tabs. You can
specify up to three daily and three monthly limits.
Once traffic reaches one of these limits, you will receive a notification.
View charts and reports
On the GPRS Monitor, you can view network connection cost charts and traffic
charts, as well as generate detailed reports of network connection usage during
a given period of time. These reports can be exported to CSV files that you can
open using Excel, Access, or other similar spreadsheet and database software
applications.
To view charts and generate reports
On the GPRS Monitor screen:
•
Tap the Chart tab to view the network connection cost charts and traffic
charts.
•
Tap the Report tab to generate reports on network traffic and tariff.
For more information about using Spb GPRS Monitor, see Help on your device.
ꢀ54 Programs
12.13 Sprite Backup
Use Sprite Backup to back up data, which includes settings, files, contacts, and all
other information, to the device memory, storage card or a computer.
Note
If you are sending your device for repair or performing a hard reset, data from your
device will be lost. It is recommended that you use Sprite Backup to back up your
files including settings, contacts and other information to your computer or a storage
card.
To install Sprite Backup
1. Make sure your device is connected to your computer via a USB cable.
2. Insert the Application disc on your computer’s disc drive and start the Sprite
Backup installation.
3. Follow the on-screen instructions to install the Sprite Backup PC Manager to
your computer and the Sprite Backup program onto your device.
To open Sprite Backup
On your device, tap Start > Programs > Sprite Backup.
Before you start to back up or restore files, check the following:
•
Make sure that the device storage memory has at least 15MB of free space.
To check, tap Start > Settings > System tab > Memory > Main tab.
•
If you have a storage card installed, make sure that it has at least 100MB of
free space. To check, tap Start > Settings > System tab > Memory >
Storage Card tab.
To back up data
1. To back up data remotely to a computer, enable the PC backup feature first.
See “To enable remote backup to a computer”for instructions.
2. On the Sprite Backup main screen, tap Backup.
3. On the Backup Data Selection screen, you will see a tree view of the data and
files on your device. Tap “+”before an item to view its sub-items.
Programs ꢀ55
Use the check boxes to select or exclude items for backup.
Main screen
Backup Data Selection screen
Notes
•
•
To prevent data restore problems, it is recommended that you exclude the device’s
File System from back up. To exclude File System from back up, tap “+”before the
System Data item to expand the list, then clear the File System checkbox.
When File System is excluded from back up, you need to reinstall all third party
programs to your device after you do a hard reset and restored your files.
4. After selecting data items, tap Next. The Save As screen then appears.
5. Enter a file name for the backup file.
6. In Location, choose whether to save the backup file to \Storage Card
(if one is installed), \My Documents on the device memory, or to a PC.
Tip
When backing up data to a storage card or to \My Documents on the device
memory, you can also choose a specific folder where to save the backup file.
7. Tap Next.
8. On the Device Reset Required screen, tap Next to start the backup.
Note
Do not start and use any programs on your device until the backup process is completed.
ꢀ5ꢂ Programs
To restore data
1. On the Sprite Backup main screen, tap Restore. Sprite Backup then searches
for all available backup files on the device memory and storage card and then
displays them on the Open File screen.
Tip
To search for backup files created on your computer, connect your device to
your computer and run Sprite Backup PC Manager on your computer. In Sprite
Backup’s Open File screen on your device, set Location to PC.
2. Select the backup file you want to restore and then tap Next.
3. In the tree view, select the items you want to be restored to your device and
then tap Next.
Note If your device has an enabled SIM PIN lock, a screen will appear prompting you
to set up the Sprite Backup SIM Unlock feature. It is recommended that you set
up this feature to prevent file restoration errors. To set up the SIM PIN lock, tap
Setup Phone SIM Lock.
4. On the Device Reset Required screen, tap Next to begin restoring data.
Note
Sprite Backup resets your device before it begins the backup or restoration process. It
resets the device again after the operation is completed.
To enable remote backup to a computer
1. On the Sprite Backup main screen, tap Options > Networking > PC.
2. Select the Enable PC Backup check box and choose whether to do the
remote backup to your computer via ActiveSync or network.
For more information about using Sprite Backup, see the Sprite Backup Help or
download the Sprite Backup User Manual from http://www.spritesoftware.com/.
Programs ꢀ5ꢃ
12.14 Tasks
Use Tasks to keep track of things you need to do. A task can occur once or
repeatedly (recurring).
Your tasks are displayed in a task list. Overdue tasks are displayed in red. A reminder
will be displayed when you have new tasks to be completed.
To create a task
1. Tap Start > Programs > Tasks.
2. Tap Menu > New Task, enter a subject for the task, and fill in information
such as start and due dates, priority, and so on.
3. Specify the type of category for your task, so that it can be grouped with
other related tasks. Tap Categories, then select a preset category (Business,
Holiday, Personal, or Seasonal), or tap New to create your own category.
4. When finished, tap OK.
To change the priority of a task
Before you can sort tasks by priority, you need to specify a priority level for each
task.
1. Tap Start > Programs > Tasks.
2. Tap the task you want to change the priority for.
3. Tap Edit, and tap a priority level in the Priority box.
4. Tap OK to return to the task list.
Note
All new tasks are assigned a Normal priority by default.
To show start and due dates in the task list
1. Tap Start > Programs > Tasks.
2. Tap Menu > Options.
3. Select the Show start and due dates check box, then tap OK.
ꢀ58 Programs
To send task information as a vCalendar
After selecting the task to send in the Task screen, tap Menu > Send as vCalendar
to send a vCalendar containing task details as a file attachment in an MMS message.
For more information, see “MMS”in Chapter ꢂ.
12.15 Voice Commander
Voice Commander enables you to call contacts, open programs, or control
multimedia playback using voice commands. It also lets you create customized
voice tags for faster and more accurate voice recognition.
Open Voice Commander
1. Tap Start > Programs > Voice Commander.
2. Voice Commander comes with preset voice commands for common tasks.
Select a voice command on the screen, then say the command.
For example, say “Call John”to make a call to your contact named John, or
“Start File Explorer”to open the File Explorer program.
Progress bar
Voice
commands
Tap to create voice
tags or adjust the
Voice Commander
settings.
Programs ꢀ59
Notes
•
Do not pause when you say a command. For example, no pause is required
between “Call”and “John”.
•
If the program cannot recognize your voice command, move to a quiet place, then
try again while speaking clearly. For better voice command recognition, say the
command with the same voice that you would use in a call.
•
Say the command completely before the progress bar reaches the end.
Create a voice tag for a contact
To improve voice command accuracy and convenience, you can create customized
voice tags for your contacts. For example, you can create a voice tag “boss”to dial
your supervisor’s phone number.
1. Tap Start > Settings > Personal tab > Voice Commander Settings.
Tip
You can also tap Menu > Settings in the Voice Commander screen to open the
Voice Commander settings.
2. Tap the Contacts tab to display the list
of contacts stored on your device, then
select the desired contact.
Voice tag
icon
3. Tap the Record button, then record
your voice tag.
When finished recording, a voice tag
icon ( ) appears on the right of the
contact.
Record
button
Tip
To ensure better voice recognition,
record your voice tags in a quiet
place.
4. After you have created a voice tag for a contact, you can:
•
•
•
Tap
Tap
Tap
to rebuild the voice tag.
to play back the voice tag.
to delete the voice tag.
ꢀꢂ0 Programs
Create a voice tag for a program
You can create customized voice tags to open programs with commands that are
not included in the preset voice command list. For example, you can create a voice
tag “audio”to open the Audio Manager program.
1. Tap Start > Settings > Personal tab > Voice Commander Settings.
Tip
You can also tap Menu > Settings in the Voice Commander screen to open the
Voice Commander settings.
2. Tap the Application tab to display the list of programs installed on your
device, then select the desired program.
3. Follow steps ꢁ to 4 of the previous section to create the voice tag.
Note
For details on creating customized voice tags, see Help on your device.
12.16 Voice Recorder
Voice Recorder lets you record your voice and quickly send it as an MMS or e-mail
attachment, beam it via Bluetooth, or set the recorded voice as your ring tone.
Note
Voice Recorder saves voice recordings in AMR-NB (Adaptive Multi-Rate Narrowband)
format only. This is a common speech audio format used in mobile devices.
To record your voice
1. Tap Start > Programs > Voice Recorder.
2. Hold the device’s microphone close to your mouth.
3. Touch Record or
to start recording. Tap Stop or
to end the
recording.
To select or create a folder where to save voice recordings
By default, all recordings are saved in the My Voices folder of the device. You can
choose another folder or create a new folder to save your voice recordings.
Programs ꢀꢂ1
Note
If a storage card is installed before you open Voice Recorder, the recordings are saved
in the My Voices folder on the storage card by default.
1. Tap the arrow beside the folder name on the top-left of the screen.
2. In the menu that opens, choose an existing folder or touch Add/Delete to
create a new folder.
To play back a voice recording
On the Voice Recorder screen, touch a voice recording, or navigate to a voice
recording and then tap Play (
).
Tip
If you need to adjust the sound volume, touch any of the status icons on the title bar
and then touch the Volume icon (
) to open the System Volume screen where you
can adjust the volume.
To send a voice recording through MMS
Select a voice recording, then tap Menu > Send via MMS. A new MMS message is
then created with the voice recording automatically inserted as an audio clip.
See “MMS”in Chapter ꢂ to learn how to compose and send MMS messages.
To send a voice recording via e-mail
Select a voice recording, tap Menu > Send, and then select an e-mail account.
This creates a new e-mail message with the voice recording inserted as a file
attachment.
See “Using E-mail”in Chapter ꢂ to learn how to send e-mails.
To beam a voice recording via Bluetooth
1. Select the voice recording you want to beam, then tap Menu > Beam File.
Tip
To select multiple recordings, tap and drag over the desired recordings or tap
Menu > Select All.
2. Tap the device you want to send the voice recording to.
3. On the other device, accept the file transfer to receive the file.
ꢀꢂꢀ Programs
To set a voice recording as ring tone
Select the voice recording, then tap Menu > Set as Ringtone.
To rename or move a recording
1. Select the voice recording, then tap Menu > Rename/Move.
Tip
To select multiple recordings, tap and drag over the desired recordings or tap
Menu > Select All. Note that you can move multiple files, but you cannot
rename multiple files simultaneously.
2. In Name, enter the new voice recording name.
3. To move the voice recording, select the new destination Folder and
Location. Tap OK.
12.17 WorldCard Mobile
WorldCard Mobile lets you take a photo of a business card and easily export the
contact information on the card into your Contacts.
To install WorldCard Mobile
1. Make sure your device is connected to your computer via a USB cable.
2. Insert the Application disc on your computer’s disc drive and start the
WorldCard Mobile installation.
3. Follow the on-screen instructions to install the program to your device.
To open WorldCard Mobile
Tap Start > Programs > WorldCard Mobile.
Programs ꢀꢂꢁ
Tap to open the
Camera program
and take a photo of a
business card.
Tap to view the
WorldCard Mobile
copyright information.
Tap to open the
WorldCard Mobile help.
Tap to exit
WorldCard Mobile.
Capture and export business card information
Capture a business card and export the card information as a new contact in your
Contacts list.
To capture a business card and export its information to Contacts
1. Tap
on the WorldCard Mobile screen.
2. Press ENTER to take a photo of the business card. Refer to Chapter 11 for
details on how to use the camera.
Tip
Make sure that the business card is displayed completely in the Camera screen
before you take the photo, and that lighting is adequate.
3. On the WorldCard Mobile screen, tap Recognize.
Tips
•
If you want to retake the shot, tap Re-Capture.
•
For better recognition, choose the Language and Region based on the
language used in the business card.
4. The screen shows various contact information from the business card. Use the
on-screen keyboard to edit the contact information, if needed.
ꢀꢂ4 Programs
Clear this box
if you do not
want to include
the particular
information for
the contact when
exported to the
Contacts list.
Tap to open
the on-screen
keyboard and
edit the contact
details.
Tap the down
arrow to change
the field name.
5. Tap Export, then go to your Contacts list to view the exported contact.
For more information about using WorldCard Mobile, see Help on your device.
Programs ꢀꢂ5
12.18 ZIP
The ZIP program increases the storage capacity of your device by allowing you to
compress files in the conventional ZIP format. It also allows you to extract files from
a zip file.
To start ZIP on your device
Tap Start > Programs > ZIP.
Each time you start ZIP, it searches for files that have the .zip file extension, and
displays these files on the Archive List screen.
To open a ZIP file and extract files
1. Touch a zip file to open it, or navigate to a zip file and then touch File > Open
Archive.
Note You cannot select multiple ZIP files.
2. From the zip file, select files by doing one of the following:
•
•
Touch a file to select it.
To select several files, touch Menu > Action and make sure Multi-Select
Mode is selected. Select files by touching each file. (Touch a selected file
to deselect it).
•
To select all files, touch Menu > Action > Select All.
3. Touch Menu > Action > Extract.
4. Choose a folder where the files will be extracted to, then touch Extract.
5. Touch Menu > File > Close Archive to close the zip file.
ꢀꢂꢂ Programs
To create a new zip archive
1. Touch File > New Archive.
2. On the Save As screen, enter the zip file name and choose a folder where
you want to save it. You can also choose whether to save the zip file on the
device’s main memory or a storage card.
3. Touch Save.
4. Touch Menu > Action > Add.
5. Navigate to the folder that contains the files you want to archive.
6. Select files to add by doing one of the following:
•
•
•
Touch a file to select it.
To select several consecutive files, drag over the files.
To select several non-contiguous files, use the stylus to tap and hold on
the screen and then select Multi-Select Mode. Select files by tapping
each file. (Tap a selected file to deselect it).
•
To select all files, use the stylus to tap and hold on the screen and then tap
Select All.
7. Touch Add.
8. Touch Menu > File > Close Archive to save and close the zip file.
Chapter 13
Managing Your Device
13.1 Copying and Managing Files
13.2 Settings on your Device
13.3 Changing Basic Settings
13.4 Using Connection Setup
13.5 Using Task Manager
13.6 Connecting to an External Display
13.7 Protecting Your Device
13.8 Managing Memory
13.9 Resetting Your Device
13.10 Windows Update
13.11 Battery Saving Tips
ꢀꢂ8 Managing Your Device
13.1 Copying and Managing Files
You can copy files between your device and computer, or copy files to a storage
card installed on your device. You can also efficiently manage your files and folders
using File Explorer.
To copy files using Windows Mobile Device Center or ActiveSync
1. Connect your device to the computer.
2. Click File Management > Browse the contents of your device in Windows
Mobile Device Center on your computer, or click Explore in ActiveSync on
your computer. This opens Windows Explorer on your computer and displays
the contents of your device.
3. To copy a file from your device to your computer:
a. Browse the contents of your device, right-click the file you want to copy,
then click Copy.
b. Right-click a folder on your computer, then click Paste.
4. To copy a file from your computer to your device:
a. Browse the folders on your computer, right-click the file you want to copy,
then click Copy.
b. Right-click a folder on your device, then click Paste.
To manage files on your device using File Explorer
File Explorer lets you browse and manage the contents of your device. The root
folder on the device is named My Device, and contains the following folders: My
Documents, Program Files, Windows, and more.
1. Tap Start > Programs > File Explorer.
2. Tap a folder or file to open it.
3. To return to an upper level folder, tap Up and select the folder.
Managing Your Device ꢀꢂ9
4. To quickly delete, rename, or copy a file, tap and hold the file, then choose
the desired operation on the shortcut menu. To copy or delete multiple files,
tap and drag over the desired files to select, tap and hold the selection, then
choose the desired operation on the shortcut menu.
To copy files to a storage card
1. Make sure that the storage card is properly installed on your device.
2. Tap Start > Programs > File Explorer and navigate to the appropriate folder.
3. Tap and hold the file you want to copy, then tap Copy.
4. Tap the down arrow ( ), then tap Storage Card in the list.
5. Tap and hold an empty area on the screen and then select Paste on the
menu.
Tip
You can configure programs such as Word Mobile and Excel Mobile to directly save
edited files onto a storage card. In the program's file list, tap Menu > Options, then
select the Storage Card in the Save to box.
13.2 Settings on your Device
You can adjust the device settings to suit the way you work. To see all available
settings, slide to the Settings tab on the Home screen and tap All Settings.
Personal tab
Icon
Description
Buttons Assign a program or function to a hardware button.
Input Set options for each of the input methods.
Keyboard Sliding Sound Select a sound to play when you open and close the
hardware keyboard.
ꢀꢃ0 Managing Your Device
Icon
Description
Lock Set a password for your device.
Menus Set which programs will appear in the Start menu.
Owner Information Enter your personal information on your device.
Phone Customize phone settings such as ring tone, set a PIN number for your
SIM card, and more.
Sounds & Notifications Enable sounds for events, notifications, and more, and
set the type of notification for different events.
Today Customize the appearance and the information to be displayed on the
Home screen.
Voice Commander Settings Customize Voice Commander features or create
personalized voice tags for contacts, programs, and music playback controls so
Voice Commander can easily recognize your voice commands.
System tab
Icon
Description
About This is where you can see basic information such as the Windows Mobile®
version and type of processor used on your device. You can also specify a name
for your device.
Certificates See information about certificates that are installed on your device.
Clear Storage Reset your device to factory default settings.
Managing Your Device ꢀꢃ1
Icon
Description
Clock & Alarms Set the device clock to the date and time of your locale or to a
visiting time zone when you’re traveling. Alarms can also be set at specified days
and times of a week.
Customer Feedback Set your device to automatically send information about
how you use Windows Mobile. By default, this option is disabled.
Device Information See information about the firmware version, hardware,
identity, and the duration of calls made on your device.
Encryption Encrypt files on your storage card. Encrypted files will only be
readable on your device.
Error Reporting Enable or disable the device's error reporting function. When
this function is enabled and a program error occurs, technical data about the state
of the program and your computer will be logged in a text file and delivered to
Microsoft's technical support if you choose to send it.
External GPS Set the appropriate GPS communication ports, if required. You may
need to do this when there are programs on your device that access GPS data or
you have connected a GPS receiver to your device. See Help for details.
G-Sensor Recalibrate the G-Sensor of the device. Use when auto-rotate is not
working properly.
Long Press End Key Choose the desired function to be executed (for instance,
lock the device) when pressing and holding the END key.
Managed Programs Displays the programs that were installed on your device
using System Center Mobile Device Manager.
Memory Check the device memory allocation status and storage card
information.
Microphone AGC Adjust the volume of your voice automatically when you are
recording.
ꢀꢃꢀ Managing Your Device
Icon
Description
Power Check the remaining battery power. You can also set the brightness of
the backlight and timeout for turning off the display (switching device to Sleep
mode) to conserve battery power.
Regional Settings Set the regional configuration to use, including the format for
displaying numbers, currency, date, and time on your device.
Remove Programs Remove programs that you installed on your device.
Screen Re-calibrate the screen, apply ClearType, and change the screen text size.
Task Manager Stop running programs and set the (
) button to end programs
immediately when you tap the button. For more information, see “Using Task
Manager”in this chapter.
TouchFLO You can enable or mute the finger scrolling and panning sound. You
can also enable or disable the large Start menu, and choose to show or hide the
System Status screen when title bar icons are tapped.
TV Out Set the video standard to use when outputting to an external display.
Windows Update Link to Microsoft's web site and update Windows Mobile® on
your device with the latest security patches or fixes, if they are available.
Managing Your Device ꢀꢃꢁ
Connections tab
Icon
Description
Advanced Network Turn on/off HSPA, set the GPRS authentication method, set
the line type to use when making circuit switch data (CSD) connection, and set
the SMS service preference. HSPA is a digital data service that provides high-speed
downstream data rates. In order for your device to attain the high connection
speed of HSPA, your wireless service provider must support this feature and you
must be within the coverage area of your service provider’s HSPA network. Your
device supports up to ꢃ.ꢀ Mbps download speeds.
Beam Set your device to receive incoming Bluetooth beams.
Bluetooth Turn Bluetooth on, set your device to visible mode, and scan for other
Bluetooth devices.
Comm Manager Manage your device’s connections (including GPRS/ꢁG, Wi-Fi,
and Bluetooth), turn the phone on or off, and enable or disable the Direct Push
function.
Connection Setup Configure your device’s data connections, such as GPRS,
WAP, and MMS, based on the detected or selected network operator. See “Using
Connection Setup”in this chapter for details.
Connections Set up one or more types of modem connections for your device,
such as phone dial-up, GPRS and more, so that your device can connect to the
Internet or a private local network.
Domain Enroll Enroll your device in your company’s domain to let System
Center Mobile Device Manager to manage the device. Please ask your Server
Administrator for more details.
USB to PC Set the type of USB connection to your PC. Select the ActiveSync
option for synchronizing data, or use Disk Drive mode for transferring files.
Wi-Fi Scan for available wireless networks.
ꢀꢃ4 Managing Your Device
Icon
Description
Wireless LAN See information about the active wireless network, and customize
Wi-Fi settings.
13.3 Changing Basic Settings
Date and time
To set the date and time
1. On the Home screen Home tab, tap the time display and then tap the Time tab.
Tip
Tap the More tab and select the Display the clock on the title bar in all
programs option to show the clock on all screens.
2. Select the correct time zone and change the date or time.
Note
During synchronization, the time on your device is updated with the time on your
computer.
To set the date and time for a different location
If you visit or communicate with someone in a particular time zone often, you can
select it as your visiting time zone.
1. On the Home screen Home tab, tap the time display and then tap the Time tab.
2. Tap Visiting.
3. Select the correct time zone and change the date or time.
Regional settings
The style in which numbers, currency, dates, and times are displayed is specified in
regional settings.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Regional Settings > Region tab and then select your
region from the list.
Managing Your Device ꢀꢃ5
Note This does not change the language of your device’s operating system.
The region you select determines which options will be available on the other
tabs.
3. To customize regional settings further, tap the appropriate tabs and set the
desired options.
Display settings
To adjust the screen brightness
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Power > Backlight tab.
3. Adjust the brightness by dragging the slider under On battery power and
On external power.
Tip
Select Auto adjust backlight to automatically adjust the backlight brightness
according to the ambient lighting.
To set the backlight to dim after a time delay
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Power > Advanced tab.
3. In On battery power and On external power, select the Turn off backlight
if device is not used for check box, then specify the time delay.
To increase or decrease the size of text on the screen
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Screen > Text Size tab.
3. Move the slider to increase or decrease the text size.
ꢀꢃꢂ Managing Your Device
Device name
The device name is used to identify your device in the following situations:
•
•
•
Synchronizing with a computer
Connecting to a network
Restoring information from a backup
Note
If you synchronize multiple devices with the same computer, each device must have a
unique name.
To change the device name
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap About > Device ID tab.
3. Enter the device name.
Notes
•
•
The device name must begin with a letter, consist of letters from A to Z, numbers
from 0 to 9, and cannot contain spaces. Use the underscore character to separate
words.
If you enroll your device to your company’s domain, the device name will be
changed to be the same as the one used to enroll the device.
Ringer settings
To change the ring type and ring tone
1. On the Home screen, slide to the Settings tab and then tap Sound.
2. Scroll down and then tap Ring Type. Select the Ring Type you want to use
and then tap Done.
3. Tap Ringtone and then select the ringtone you want to use.
4. Tap Done.
Managing Your Device ꢀꢃꢃ
Tips
•
•
You can use *.wav, *.mid, *.mp3, *.wma, or other types of sound files that you
downloaded from the Internet or copied from your computer as ring tones. To
quickly set the music file as a ring tone, tap and hold the music file and then select
Set As Ringtone. For a complete list of supported audio file formats for ring tones,
see "Specifications" in the Appendix.
To use your sound files as ring tones, copy them first to the /My Documents/My
Ringtones folder on your device, then select the sound from the Ring tone list of
your device. For more information about copying files, see “Copying and Managing
Files”in this chapter.
Alarms and notifications
To set an alarm
1. On the Home screen Home tab, tap the time display and then tap the Alarms
tab.
2. Tap <Description> and enter a name for the alarm.
3. Tap the day of the week for the alarm. Select multiple days by tapping each
desired day. Tap again to deselect the day.
4. Tap the time to open a clock and set the time for the alarm.
Tip
You can drag the hour and minute hands of the clock to set the time.
5. Tap the alarm icon (
) to specify the type of alarm you want. You can
choose a flashing light, a single sound, a repeating sound, or vibration.
6. If you choose to play a sound, tap the list next to the Play sound check box
and tap the sound you want.
To choose how to be notified about events or actions
1. On the Home screen, slide to the Settings tab and then tap Sound >
Advanced.
2. On the Sounds tab, choose how you want to be notified by selecting the
appropriate check boxes.
ꢀꢃ8 Managing Your Device
3. On the Notifications tab, in Event, tap an event name and choose how you
want to be notified by selecting the appropriate check boxes. You can choose
from several options, such as a special sound, a message, a flashing light, or
vibrate.
Tip
Turning off sounds and flashing light notifications helps conserve battery power.
Phone services
Your device can directly link to the mobile phone network, and enable you to
access and change the settings of various phone services for your device. Phone
services may include Call Forwarding, Call Waiting, Voicemail, and more. Contact
your wireless service provider to find out about the availability of phone services for
your device.
To access and change settings of phone services
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the Personal tab, tap Phone > Services tab.
3. Select the service you want to use, then tap Get Settings.
4. Choose your desired options, then tap OK.
For more information about customizing settings of phone services, see Help on
your device.
13.4 Using Connection Setup
Connection Setup configures your device’s data connections, such as GPRS, WAP,
and MMS, for you so that you do not need to enter the settings manually onto your
device. All you need to do is to select your network operator, then Connection
Setup does all the configuration for you.
Managing Your Device ꢀꢃ9
To automatically configure the device’s data connections
The first time you power on your device, or when
you insert a new SIM card and then power on your
device, Connection Setup will display a notification
message to inform you that it will automatically
configure your device’s connection settings.
1. Tap Yes on the notification message.
Note If your SIM card supports multiple network operator profiles, the next message
that appears will display network profile choices. Select the profile you want to
use and tap OK.
2. When prompted to automatically configure your device to the proper
network settings, tap Yes.
Connection Setup configures your device’s data connection settings.
3. After the Connection Setup completes the configuration, tap Restart.
To manually select the network operator to use for data connections
You can also manually select your network operator from Connection Setup’s
settings screen. Connection Setup will then reconfigure your device’s data
connections settings based on the operator that you selected.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the Connections tab, tap Connection Setup.
3. Select the network Country and Operator you want to use, then tap OK.
Note If you choose a Country and/or Operator that is different from the installed SIM
card network operator, you may not be able to access network services.
4. When prompted to confirm whether you want to configure the data
connection settings based on the selected network, tap Yes.
Connection Setup configures the data connection settings.
5. After the Connection Setup completes the configuration, tap Restart.
ꢀ80 Managing Your Device
13.5 Using Task Manager
Task Manager lets you view and stop running programs, configure the button,
and enable the Quick Menu on the Home screen.
To open Task Manager
•
Tap the Quick Menu button on the top right corner of the Home screen to
open the Quick Menu, then tap
.
•
On the Home screen, slide to the Settings tab and then tap All Settings.
On the System tab, tap Task Manager.
To switch back to a running program
•
Tap the program name in the Quick Menu.
•
On the Task Manager screen, tap and hold the program name on the
Running tab, then tap Activate.
To configure the Exit (
) button
You can configure the Exit button to shut down running programs when the
button is tapped, or to just temporarily close the program screen but keep the
program running.
1. On the Task Manager screen, tap the Button tab.
2. Select the Enable the “X” button to end running programs check box.
Note When the Enable the “X” button to end running programs check box is not
selected, tapping the Exit button will only close a program screen. The program
is not ended and continues to run in the background.
3. Choose the action for shutting down programs (by tapping the
by tapping and holding the button).
4. Tap OK.
button, or
Managing Your Device ꢀ81
To close running programs from the Task Manager
1. On the Task Manager screen, tap the Running tab.
2. Do one of the following:
•
Select the check box of the programs that you want to close, then tap
Stop Selected.
•
•
Tap Stop All to close all programs in the list.
Tap Menu > Stop All but Selected to close all programs except those
which check boxes are selected.
Tip
You can also close running programs from the Quick Menu on the Home screen. See
“Quick Menu”in Chapter 1 for details.
To add a running program to the exclusive list
If you add a running program to the Exclusive Programs List, it will not be closed
when you tap Stop Selected or Stop All and will not be listed in the Quick Menu
on the Home Screen.
1. On the Task Manager screen, tap the Running tab.
2. Tap and hold the program name, then tap Add Exclusive.
Tip
To remove a program from the exclusive list, tap the Exclusive tab, select the check
box of the program, then tap Remove.
To set the sorting preference and program icon size in the Quick Menu
1. On the Task Manager screen, tap the Others tab.
2. In Sort programs in Quick Menu by, choose whether to sort according to
Program name or Memory usage. The list will be sorted in ascending order.
3. In Program icon size in Quick Menu, choose whether to use Small size or
Large size.
ꢀ8ꢀ Managing Your Device
13.6 Connecting to an External Display
The TV Out function outputs the device’s screen contents and audio to an external
display with an RCA cable socket such as a television.
Notes
•
•
•
You need an HTC TV Out cable to be able to connect your device to an external
display. The HTC TV Out cable is sold separately.
When you plug in the HTC TV Out cable to your device, you will not be able to play
music files from the TouchFLO ꢁD Music tab.
It is recommended that you use an audio accessory (not the HTC TV Out cable)
such as the wired headset when you want to listen to music on your device. You
can check the HTC web site for other audio accessories for your device.
Connect the device to an external display
1. Turn off the external display.
2. Connect the ends (red, white, and yellow RCA plugs) of the HTC TV Out cable
to the external display’s RCA sockets.
3. Connect the mini-USB end of the HTC TV
Out cable to the sync connector at the
bottom of the device. The TV Out screen
opens.
Note The device’s display automatically
changes to landscape mode after you
connect the HTC TV Out cable.
4. Choose the video standard to use when
outputting the video and then tap Done.
For example, if your video is in the NTSC
standard and you select PAL-M, TV Out will
automatically convert your video to PAL-M
before it outputs to the external display.
Note If you need to change the video standard option in the future, tap
Start > Settings > System tab > TV Out.
Managing Your Device ꢀ8ꢁ
5. Tap the type of media you want to output.
6. Turn on the external display and then switch to the input signal that you
connected the HTC TV Out cable to (for example, Video 1).
13.7 Protecting Your Device
Protect your SIM card with a PIN
You can protect your SIM card from unauthorized use by assigning a PIN (personal
identification number). The default SIM card PIN is provided by your wireless service
provider.
To enable the SIM card PIN
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the Personal tab, tap Phone > PIN/PIN2 tab.
3. Select the Require PIN when phone is used check box.
4. Enter the PIN number and then tap OK. To change the PIN at any time, tap
Change PIN.
Tip
Emergency calls can be placed at any time, without requiring a PIN.
Protect your device with a password
You can help keep your data more secure by requiring a password every time the
device is turned on.
To set a device password
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the Personal tab, tap Lock.
3. Select the Prompt if device unused for check box, then specify the idle time
before the device requires a password.
4. In the Password type box, select the type of password you would like to use.
ꢀ84 Managing Your Device
Tip
If your device is configured to connect to a network, use an alphanumeric
password for increased security.
5. Enter the password in both the Password and Confirm boxes.
6. Tap OK. The next time the device is turned on, you will be prompted to enter
your password.
Notes
•
•
•
•
To ensure that you can always make emergency calls, do not begin your password
with the digits of your local emergency number.
If you entered a hint, the hint will be displayed after the wrong password is entered
five times.
Each time a wrong password is entered, the device response time gets longer until
the device appears to be not responding.
If you forget your password, you can hard reset or clear the device memory. Before
you do this, make sure you back up your data and files so that you can restore
them back to your device. For more information about hard resetting the device
and clearing the memory, see “Resetting Your Device”in this chapter.
Encrypt files on your storage card
You can set your device to encrypt files as they are saved on the storage card.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Encryption.
3. Select Encrypt files when placed on a storage card.
Notes
•
•
Encrypted files can only be read on the device that encrypted them.
Encrypted files are opened just like other files, provided you are using the device
that encrypted them. There is no separate step for you to take to read these files.
Important If Encrypt files when placed on a storage card is enabled, backup all files from
the storage card before using Clear Storage, hard reset, or updating the ROM
system software. Otherwise you will no longer be able to access the encrypted files
on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer
files between your storage card and computer. After the procedure, copy your files
back to the storage card.
Managing Your Device ꢀ85
13.8 Managing Memory
To see how much memory is available for use
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Memory > Main tab. The amount of memory
allocated to data storage versus program storage is displayed, as well as the
amount of memory in use versus the available memory.
To see the available storage card space
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Memory > Storage Card tab.
If your device is running low on memory, try the following to free memory on your
device:
•
•
•
Close programs which are not in use.
Move files and e-mail attachments to the storage card.
Delete unnecessary files. Tap Start > Programs > File Explorer. Tap and hold
the file, and tap Delete.
•
•
Delete large files. To find large files on your device, tap Start > Programs >
Search. In the Type list, tap Larger than 64 KB, and tap Search.
In Opera Mobile or Internet Explorer Mobile, delete temporary Internet files
and clear history information.
•
•
Remove programs you no longer use.
Reset your device.
ꢀ8ꢂ Managing Your Device
13.9 Resetting Your Device
Soft reset
Occasionally, you may need to reset your device. A soft (or normal) reset of your
device clears all active program memory and shuts down all active programs. This
can be useful when your device is running slower than normal, or a program is not
performing properly. A soft reset is also necessary after the installation of some
programs. If a soft reset is performed when programs are running, unsaved work
will be lost.
To perform a soft reset
1. Pull out the stylus.
2. Use the stylus tip to press the
RESET button located at the
bottom of the device.
Your device restarts and displays
the Home screen.
Hard reset
You can also perform a hard reset (also known as a full reset). A hard reset should
only be performed if a normal reset does not solve a system problem. After a
hard reset, the device is restored to its default settings—the way it was when you
first purchased it and turned it on. Any programs you installed, data you entered,
and settings you customized on your device will be lost. Only Windows Mobile®
software and other pre-installed programs will remain.
Warning! Your device will be set back to factory default settings. Make sure that any
additional installed programs and/or user data have been backed up before you
perform a hard reset.
Managing Your Device ꢀ8ꢃ
Important If Encrypt files when placed on a storage card is enabled, backup all files from
the storage card before using Clear Storage, hard reset, or updating the ROM
system software. Otherwise you will no longer be able to access the encrypted files
on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer
files between your storage card and computer. After the procedure, copy your files
back to the storage card.
To perform a hard reset
1. Pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and ENTER
buttons, then press the RESET button with the stylus tip.
3. Release the RESET button, but continue pressing the VOLUME DOWN and
ENTER buttons until you see this message on the screen:
This operation will delete
all your personal data,
and reset all settings
to manufacturer default.
Press VolUp to restore
manufacturer default, or
press other keys to cancel.
4. Release the VOLUME DOWN and ENTER buttons, then press the VOLUME UP
button to perform the hard reset, or press any other button to cancel the
reset.
Clear Storage
You can also use Clear Storage to reset your device back to factory default settings.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234”and then tap Yes.
ꢀ88 Managing Your Device
13.10 Windows Update
You can update Windows Mobile® on your device with the latest updates, security
patches or fixes, if these are available.
To set up Windows Update
The first time you run Windows Update, you need to set up how you want Windows
Update to check for patches on the Microsoft web site.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Windows Update.
3. On the Update Setup screen, tap Next.
4. Choose how you want to check for updates, Manual or Automatic, then tap
Next.
Note If you select Automatic, you will be asked if you want to use your current data
plan to check for updates. Select or clear the Use my data plan to check for and
download updates check box and tap Next.
5. Tap Finish.
To check for updates
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Windows Update.
3. Tap Check Now.
Note
Windows Mobile® updates may not be available at all times. Check the Windows
Mobile® web site for update information.
To change Windows Update options
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Windows Update.
Managing Your Device ꢀ89
3. Tap Menu and select the option you want to
change.
•
Tap Connections to change how the
device connects to the Internet when
checking for updates.
•
Tap Change Schedule to change how
Windows Update checks for Windows
Mobile® updates.
13.11 Battery Saving Tips
How long your battery power lasts depends on the battery type and how you use
your device. Try the following to help conserve battery life:
•
•
When the device is not in use, press POWER to switch off the display.
On the Home screen, slide to the Settings tab and then tap All Settings. On
the System tab, tap Power > Advanced tab of the Power settings screen.
Here, you can specify the time before your device automatically turns off the
display and backlight to conserve battery power. For optimum conservation,
specify ꢁ minutes or less.
•
•
On the Home screen, slide to the Settings tab and then tap All Settings. On
the System tab, tap Power > Backlight tab to adjust the backlight brightness
settings.
Use the AC adapter to plug your device into an external power outlet
whenever possible, especially when using a storage card or when using a
modem or other peripherals.
ꢀ90 Managing Your Device
•
Turn Bluetooth off when you are not using it. Make your device visible to
other devices only when you are trying to establish a Bluetooth partnership.
For more information about Bluetooth, see Chapter 9.
•
•
Lower the volume.
Close battery-intensive programs, such as the Camera, when you are done
using them. Make sure the programs are ended and are not continuously
running in the background. Refer to “Using Task Manager”in this chapter for
information on closing programs.
Appendix
A.1 Specifications
A.2 Regulatory Notices
ꢀ9ꢀ Appendix
A.1 Specifications
System Information
Processor
Qualcomm® MSMꢃꢀ01A™ 5ꢀ8 MHz
• ROM : 51ꢀ MB
Memory
• RAM : ꢀ88 MB DDR
Note: Figures are the total ROM and RAM memory available for use and
storage. Since the memory is shared by the operating system, applications,
and data, the actual available memory is less than what is specified.
Operating System
Windows Mobile® ꢂ.1 Professional
Power
Battery
Rechargeable Lithium-ion or Lithium-ion polymer battery,
1ꢁ40 mAh
Battery Life
(estimates)
Standby time:
WCDMA: Up to 4ꢂꢀ hours
GSM: Up to ꢁꢂꢃ hours
Talk time:
WCDMA: Up to ꢁꢃ8 minutes
GSM: Up to 419 minutes
Video call time:
Up to 189 minutes
(The above are subject to network and phone usage.)
AC Adapter
Voltage range/frequency: 100 - ꢀ40V AC, 50/ꢂ0 Hz
DC output: 5V and 1A
Communications
Network
HSPA/WCDMA:
• 900/ꢀ100 MHz
• Up to ꢀ Mbps up-link and ꢃ.ꢀ Mbps down-link speeds
Quad-band GSM/GPRS/EDGE:
• 850/900/1800/1900 MHz
(Band frequency and data speed are operator dependent.)
Internal Antenna
Yes
Appendix ꢀ9ꢁ
Physical
Dimensions
Weight
10ꢀ mm (L) X 51 mm (W) X 18.05 mm (T)
1ꢂ5 g (with battery)
Display
LCD Type
ꢀ.8-inch TFT-LCD flat touch-sensitive screen
480 x ꢂ40 VGA resolution
Resolution
Camera Module
Type
Main camera: ꢁ.ꢀ megapixel color camera with auto focus and
flash light
Second camera: VGA CMOS color camera
Resolution
• Photo: ꢁM (ꢀ048 x 15ꢁꢂ)
ꢀM (1ꢂ00 x 1ꢀ00)
1M (1ꢀ80 x 9ꢂ0)
VGA (ꢂ40 x 480)
QVGA (ꢁꢀ0 x ꢀ40)
• Video: CIF (ꢁ5ꢀ x ꢀ88)
QVGA (ꢁꢀ0 x ꢀ40)
QCIF (1ꢃꢂ x 144)
Sub-QCIF (1ꢀ8 x 9ꢂ)
Digital Zoom
Up to 4X
Connections
I/O Port
HTC ExtUSB™
• 11-pin mini-USB and audio jack in one
• USB ꢀ.0 high speed
• TV Out*
* HTC TV Out cable is needed and is sold separately.
Wireless
Connections
• Bluetooth® ꢀ.0 with EDR
• Wi-Fi® (IEEE 80ꢀ.11 b/g)
ꢀ94 Appendix
Audio
Microphone/
Speaker
Built-in
Ring tone
• Supports MPꢁ, AAC, AAC+, WMA, WAV, AMR-NB formats
• 40 polyphonic and standard MIDI format 0 and 1 (SMF) / SP MIDI
Supported
Playback Formats
• Windows Media® Player: MPꢁ, MPEG-4, AAC, AAC+, eAAC+,
WMA, WAV, AMR, AMR-NB, AMR-WB, AWB, SP-MIDI
• TouchFLO™ ꢁD: AMR-NB/WB, MPꢁ, MPEG-4, WMA, AAC, AAC+,
eAAC+
Controls
Device Control
• TouchFLO™ ꢁD
• Touch-sensitive navigation control with ENTER button
• HOME button
• BACK button
• Phone buttons: TALK/SEND and END
• POWER button
• VOLUME CONTROL buttons
• RESET button
Hardware Keyboard
Expansion Slot
Card Slot
5-row QWERTY keyboard
microSD™ (SD ꢀ.0 compatible)
Others
Special Features
• FM radio with RDS
• GPS
Appendix ꢀ95
A.2 Regulatory Notices
Regulatory Agency Identifications
For regulatory identification purposes, your product is assigned a model number of
RAPH100.
To ensure continued reliable and safe operation of your device, use only the
accessories listed below with your RAPH100.
The Battery Pack has been assigned a model number of DIAM171.
Note
This product is intended for use with a certified Class ꢀ Limited Power Source, rated 5
Volts DC, maximum 1 Amp power supply unit.
European Union Notice
Products with CE marking comply with the R&TTE Directive (99/5/EC), the EMC
Directive (89/ꢁꢁꢂ/EEC), and the Low Voltage Directive (ꢃꢁ/ꢀꢁ/EEC) & (ꢀ00ꢂ/95/EC)
issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European
Norms (in parentheses are the equivalent international standards).
•
EN 60950-1 (IEC 60950-1)
Safety of Information Technology Equipment.
•
ETSI EN 300 328
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband
Transmission systems; data transmission equipment operating in the ꢀ.4 GHz
ISM band and using spread spectrum modulation techniques.
•
EN 300 440-2 V1.1.2
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short
range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency
range; Part ꢀ: Harmonized EN under Article ꢁ(ꢀ) of the R&TTE Directive.
ꢀ9ꢂ Appendix
•
EN 301 489-24
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and
services; Part ꢀ4: Specific conditions for IMT-ꢀ000 CDMA direct spread (UTRA)
for mobile and portable (UE) radio and ancillary equipment.
•
•
•
ETSI EN 301 511
Global system for mobile communications (GSM); Harmonized EN for
mobile stations in the GSM 900 and GSM 1800 bands, covering essential
requirements of article ꢁ.ꢀ of the R&TTE directive (1995/5/EC).
ETSI EN 301 489-1
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and
services; Part 1: Common technical requirements.
ETSI EN 301 489-7
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and
services; Part ꢃ: Specific conditions for mobile and portable radio and
ancillary equipment of digital cellular radio telecommunications systems
(GSM and DCS).
•
•
ETSI EN 301 489-17
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and
services; Part 1ꢃ: Specific conditions for ꢀ.4 GHz wideband transmission
systems.
ETSI EN 301 908-1 & -2
Electromagnetic compatibility and Radio spectrum Matters (ERM); Base
Stations (BS), Repeaters and User Equipment (UE) for IMT-ꢀ000 Third
Generation cellular networks; Part 1: Harmonized EN for IMT-ꢀ000,
introduction and common requirements, covering essential requirements of
article ꢁ.ꢀ of the R&TTE Directive.
Appendix ꢀ9ꢃ
•
•
EN 50360 / 50361
Product standard to demonstrate the compliance of mobile phones with the
basic restrictions related to human exposure to electromagnetic fields (ꢁ00
MHz ~ ꢁ GHz).
EN 50392
Generic standard to demonstrate the compliance of low power electronic and
electrical apparatus with the basic restrictions related to human exposure to
electromagnetic fields (10 MHz - ꢁ00 GHz) - General public.
•
•
EN 55013:2001
Sound and television broadcast receivers and associated equipment - Radio
disturbance characteristics - Limits and methods of measurement (CISPR
1ꢁ:ꢀ001 (Modified))
EN 55020:2007
Sound and television broadcast receivers and associated equipment
- Immunity characteristics - Limits and methods of measurement (CISPR
ꢀ0:ꢀ00ꢂ)
This equipment may be operated in:
AT
EE
IT
BE
ES
IS
BG
FI
CH
FR
LT
CY
GB
LU
SE
CZ
GR
LV
SI
DE
HU
MT
SK
DK
IE
LI
NL
TR
NO
PL
PT
RO
ꢀ98 Appendix
Safety Precautions for RF Exposure
Use only original manufacturer-approved accessories, or accessories that do not
contain any metal.
Use of non-original manufacturer-approved accessories may violate your local RF
exposure guidelines and should be avoided.
Exposure to Radio Frequency (RF) Signals
Your device contains a radio transmitter and receiver. The radiated output power
is far below the international radio frequency exposure limits. These limits are part
of comprehensive guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on the safety standards previously set
by international standards bodies:
•
•
American National Standards Institute (ANSI) IEEE. C95.1-199ꢀ
National Council on Radiation Protection and Measurement (NCRP).
Report 8ꢂ. 198ꢂ
•
•
International Commission on Non-Ionizing Radiation Protection (ICNIRP) 199ꢂ
Ministry of Health (Canada), Safety Code ꢂ. The standards include a
substantial safety margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The standard incorporates a
substantial margin of safety to give additional protection for the public and to
account for any variations in usage.
As with other mobile radio transmitting equipment, users are advised that for
satisfactory operation of the equipment and for the safety of personnel, it is
recommended that no part of the human body be allowed to come too close to the
antenna during operation of the equipment.
Your device has an internal antenna. Use only the supplied integral antenna. Use of
unauthorized or modified antennas may impair call quality and damage the phone,
Appendix ꢀ99
causing loss of performance and SAR levels exceeding the recommended limits as
well as result in non-compliance with local regulatory requirements in your country.
To assure optimal phone performance and ensure human exposure to RF energy
is within the guidelines set forth in the relevant standards; always use your
device only in its normal-use position. Do not touch or hold the antenna area
unnecessarily when placing or receiving a phone call. Contact with the antenna
area may impair call quality and cause your device to operate at a higher power
level than needed. Avoiding contact with the antenna area when the phone is IN
USE optimizes the antenna performance and the battery life.
Body-worn measurements were tested for typical body-worn operations with the
back of the device kept 1.5 cm from the body.
SAR Information
0.4ꢂꢀ w/kg @10g (Head) ; 1.ꢁ1 w/kg @10g (Body)
Telecommunications & Internet Association (TIA)
Safety Information
Pacemakers
The Health Industry Manufacturers Association recommends that a minimum
separation of six inches be maintained between a handheld wireless phone
and a pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research. Persons with pacemakers:
•
Should ALWAYS keep the phone more than six inches from their pacemaker
when the phone is turned ON.
•
•
Should not carry the phone in a breast pocket.
Should use the ear opposite the pacemaker to minimize the potential for
interference. If you have any reason to suspect that interference is taking
place, turn the phone OFF immediately.
ꢁ00 Appendix
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the event
of such interference, you may want to consult your service provider, or call the
customer service line to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your
device to determine if they are adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this information.
Turn the phone OFF in health care facilities when any regulations posted in
these areas instruct you to do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
WEEE Notice
The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered
into force as European law on 1ꢁth February ꢀ00ꢁ, resulted in a major change in the
treatment of electrical equipment at end-of-life.
The purpose of this Directive is, as a first priority, the prevention of WEEE, and
in addition, to promote the reuse, recycling and other forms of recovery of such
wastes so as to reduce disposal.
Appendix ꢁ01
The WEEE logo (shown at the left) on the product or on its box indicates
that this product must not be disposed of or dumped with your other
household waste. You are liable to dispose of all your electronic or
electrical waste equipment by relocating over to the specified collection
point for recycling of such hazardous waste. Isolated collection and
proper recovery of your electronic and electrical waste equipment at
the time of disposal will allow us to help conserving natural resources.
Moreover, proper recycling of the electronic and electrical waste
equipment will ensure safety of human health and environment. For
more information about electronic and electrical waste equipment
disposal, recovery, and collection points, please contact your local
city center, household waste disposal service, shop from where you
purchased the equipment, or manufacturer of the equipment.
RoHS Compliance
This product is in compliance with Directive ꢀ00ꢀ/95/EC of the European
Parliament and of the Council of ꢀꢃ January ꢀ00ꢁ, on the restriction of the use of
certain hazardous substances in electrical and electronic equipment (RoHS) and its
amendments.
ꢁ0ꢀ Appendix
Index
B
Symbols
Back cover
- remove ꢀ8
Backlight
ꢁG 15ꢀ
A
- adjust brightness ꢀꢃ5
- set backlight timeout ꢀꢃ5
Back up data ꢀ54
AꢀDP 18ꢀ
ActiveSync
- about ꢀꢀꢃ
- set up 10ꢂ
- synchronize with computer 10ꢃ
- synchronize with Exchange Server 1ꢁꢂ
Add and remove programs ꢀꢁ0
Adobe Reader LE ꢀꢀꢃ, ꢀꢁ1
Airplane Mode 59, ꢀ40
Alarm ꢀꢃꢃ
Album
- about ꢀ05, ꢀꢀꢃ
- close Album ꢀ10
- play back video ꢀ10
- select a photo or video to view ꢀ0ꢂ
- view an image ꢀ0ꢂ
Attachment
- add to e-mail 1ꢀ9
- download 1ꢁ1
Basic settings ꢀꢃ4
Battery
- battery information ꢀ9
- charge battery ꢁꢀ
- install ꢁ0
- remove ꢁ1
- save battery power 151, ꢀ89
Beam via Bluetooth 18ꢁ
Block Recognizer 9ꢃ
Bluetooth
- about 180
- Bluetooth Explorer 185, ꢀꢀꢃ
- Bluetooth file sharing 185
- Bluetooth shared folder 185
- hands-free headset 18ꢀ
- modem 1ꢃ1
- modes 180
- set IMAP4 to automatically receive
attachments 1ꢁꢁ
- partnership (pairing) 181
- SIM Access Profile (SAP) ꢂꢂ
- stereo headset 18ꢀ
- synchronize 109
- set Outlook to automatically receive
attachments 1ꢁꢁ
Audio Booster ꢀꢀ1, ꢀꢀꢃ
ꢁ04 Index
- turn on and off ꢀ40
- visible 180
Bluetooth Explorer ꢀꢀꢃ
Conference call 5ꢂ
Configure data connection settings ꢁ5, 15ꢀ,
ꢀꢃ8
Connect device to Internet
- Dial-up 15ꢁ
- GPRS/ꢁG 15ꢀ
C
Calculator ꢀꢀꢃ
- start a connection 154
- ways of connecting 148
Connection Setup ꢁ5, 4ꢀ, ꢀꢃ8
Contacts ꢀꢀꢂ, ꢀꢁꢂ
Contacts Picture capture mode 195
Copy
Calendar
- about ꢀꢀꢂ
- create appointment ꢀꢁꢀ
- send appointment ꢀꢁ5
- view appointment ꢀꢁ4
Call History 58
- contacts to SIM card ꢀ49
- copy and manage files ꢀꢂ8
- media files from PC to device ꢀ1ꢁ
- SIM contacts to device ꢀ49
Calling
- from Contacts 5ꢁ
- from Home screen 54
- from Phone screen 5ꢁ
Camera
- about 194, ꢀꢀꢃ
- Advanced Options
ꢀ0ꢀ
- capture modes 194
- controls 19ꢂ
- file formats 195
- icons 19ꢂ
D
Device name ꢀꢃꢂ
Dial-up 15ꢁ
Dimensions and weight ꢀ9ꢁ
Direct Push 1ꢁ8, ꢀ41
Disconnect data connection ꢀ41
Download
- Menu Panel 198
- specifications ꢀ9ꢁ
- zooming 199
Car kit phones ꢂꢂ
Clear Storage ꢀ8ꢃ
Clock & Alarms ꢀꢃ1, ꢀꢃ4, ꢀꢃꢃ
Comm Manager ꢀꢀꢃ, ꢀ40, ꢀꢃꢁ
Compact QWERTY 9ꢀ
Company Directory 144
- download complete e-mail 1ꢁ0
- e-mail download settings 1ꢀꢂ, 1ꢁꢀ
- file attachments 1ꢁ1
- Java applications ꢀ4ꢃ
- satellite data 191
- synchronize e-mails 1ꢁꢀ
- web feeds 1ꢃꢁ
Draw ꢀ45
Index ꢁ05
Forward e-mail 1ꢁ1
Full QWERTY 91
E
E-mail
- Internet e-mail account (POPꢁ/
IMAP4) 1ꢀ4
- mail server settings 1ꢀ5
- Mail tab (Home screen) ꢃ5
- send 1ꢀ9
G
G-Sensor ꢀꢃ1
Games ꢀꢀꢃ
Getting Started ꢀꢀꢃ
GPRS 15ꢀ
GPRS Monitor ꢀꢀ9, ꢀ51
GPS 190, 191, ꢀꢀ8
- settings (POPꢁ/IMAP4) 1ꢀꢂ
- setup wizard 1ꢀ4
- synchronize 10ꢀ, 1ꢁꢀ, 1ꢁꢂ
- types of e-mail accounts 1ꢀꢀ
EDGE 15ꢀ
Emergency call 54
Emoticon
H
Hard reset ꢀ8ꢂ, ꢀ8ꢃ
Hardware Keyboard 90
Help ꢀꢀꢂ
- MMS 1ꢀ0
Home screen 40, ꢂ8
Home tab (Home screen) ꢃ0
- Windows Live Messenger 1ꢂ9
Entering Information 88
- On-screen 88
- QWERTY keyboard 88
Equalizer ꢀꢀ1
Excel Mobile ꢀꢀꢂ, ꢀ4ꢁ
Exchange Server 1ꢁꢂ
I
IMAP4 1ꢀ4
Input methods
- Block Recognizer 9ꢃ
- Compact QWERTY 9ꢀ
- Full QWERTY 91
- Letter Recognizer 98
- Phone Keypad 9ꢁ
- Transcriber 98
F
Favorite contacts ꢃꢀ
File Explorer ꢀꢀꢃ, ꢀꢂ8
Find contact
Input Panel 88
- Company Directory 144
- on device ꢀꢁ8
Finger gestures 85
Finger panning 8ꢂ
Finger scrolling 85
FM Radio ꢀ1ꢃ, ꢀꢀꢃ
Input Selector arrow 88
International call 54
Internet 148
Internet e-mail 1ꢀ4
Internet Explorer Mobile ꢀꢀꢂ
ꢁ0ꢂ Index
Internet Sharing 1ꢃ0, ꢀꢀ8
Internet tab (Home screen) ꢃꢂ
Microsoft Office Mobile ꢀꢀꢂ, ꢀ4ꢁ
MMS
- about 11ꢃ
- add audio clip 1ꢀ0
- add photo/video 119
- add text 1ꢀ0
J
Java
- install MIDlets/MIDlet suites from
device ꢀ4ꢃ
- blacklist 1ꢀꢀ
- create MMS message 118
- MMS settings 11ꢃ
- reply message 1ꢀ1
- view message 1ꢀ1
MMS Video capture mode 195
Modem
- install MIDlets/MIDlet suites from
Internet ꢀ4ꢃ
- manage MIDlets/MIDlet suites ꢀ4ꢃ
- update a MIDlet/MIDlet suite ꢀ48
JBlend ꢀ4ꢂ
JETCET PRINT ꢀꢀ8
- Bluetooth 1ꢃ1
- USB 1ꢃ1
L
MPꢁ Trimmer ꢀꢀꢀ, ꢀꢀ8
Multimedia 11ꢃ, 19ꢁ
Multitap 94
Letter Recognizer 98
Library
- Music tab (Home screen) 80
- Windows Media Player Mobile ꢀ1ꢀ
Live Messenger 1ꢂꢃ
Music tab (Home screen) ꢃ8
N
News channels (web feeds) 1ꢃꢁ
Notes ꢀꢀ8, ꢀ45
M
Mail tab (Home screen) ꢃ5
Meeting request 14ꢀ, ꢀꢁ5
Memory 4ꢂ, ꢀ85, ꢀ9ꢀ
Messages tab (Home screen) ꢃ4
Messaging
Now Playing
- Music tab (Home screen) ꢃ8, 80
- Windows Media Player Mobile ꢀ1ꢀ
Numeric and Symbol Mode 9ꢂ
- about 11ꢀ, ꢀꢀꢂ
O
- e-mail 1ꢀꢀ, 1ꢀ4, 1ꢀ8
- multimedia (MMS) 11ꢃ
- text (SMS) 11ꢁ
Messenger 1ꢂꢃ, ꢀꢀ8
microSD card
Office Mobile ꢀꢀꢂ, ꢀ4ꢁ
OneNote Mobile ꢀꢀꢂ, ꢀ4ꢁ
Open PDF file ꢀꢁ1
Opera Mobile 154, ꢀꢀ8
- install ꢁ1
Index ꢁ0ꢃ
P
R
Panorama capture mode 195
Password ꢀ8ꢁ
Record
- voice note ꢀ4ꢂ
People tab (Home screen) ꢃꢀ
Phone 5ꢀ, ꢀꢀꢂ
Phone Keypad 9ꢁ
- voice recording ꢀꢂ0
Regional Settings ꢀꢃꢀ, ꢀꢃ4
Regulatory notices ꢀ95
Remote Desktop Mobile ꢀꢀ8
Reply
- e-mail 1ꢁ1
- MMS 1ꢀ1
Phone services ꢀꢃ8
Photo capture mode 195
Photos and Videos tab (Home screen) ꢃꢃ
Pictures & Videos ꢀꢀ8
Picture Theme capture mode 195
PIN 5ꢀ, ꢀ8ꢁ
- text (SMS) ꢃ4, 115
Reset
Playlists
- clear storage ꢀ8ꢃ
- hard reset ꢀ8ꢂ
- soft reset ꢀ8ꢂ
Review screen (Camera) ꢀ01
Ring tone 84, ꢀꢃꢂ
Ring type ꢀꢃꢂ
- Music tab (Home screen) 80
- Windows Media Player Mobile ꢀ1ꢂ
Play media ꢀ15
Play music
- Music tab (Home screen) ꢃ8
- Windows Media Player Mobile ꢀ15
Podcasts 1ꢃꢃ
POPꢁ 1ꢀ4
PowerPoint Mobile ꢀꢀꢂ, ꢀ4ꢁ
Programs ꢀꢀꢂ
RSS Hub
- about 1ꢃꢁ, ꢀꢀ8
- headline list 1ꢃ5
- news channels 1ꢃꢁ
- podcasts 1ꢃꢃ
Programs tab (Home screen) 84
Put call on hold 5ꢂ
- summary view 1ꢃꢂ
S
Q
Safety information 5
Screen text size ꢀꢃ5
Search ꢀꢀ8
QuickGPS 191, ꢀꢀ8
Quick menu 4ꢂ, ꢀ80
QWERTY keyboard 88
Send
- e-mail 1ꢀ9
- MMS message 118
- text message (SMS) 11ꢁ
ꢁ08 Index
Settings (Connections tab)
- Advanced Network ꢀꢃꢁ
- Beam ꢀꢃꢁ
- Power ꢀꢃꢀ
- Regional Settings ꢀꢃꢀ, ꢀꢃ4
- Remove Programs ꢀꢁ0, ꢀꢃꢀ
- Screen ꢀꢃꢀ, ꢀꢃ5
- Bluetooth ꢀꢃꢁ
- Connections 15ꢀ, 15ꢁ, ꢀꢃꢁ
- Connection Setup ꢀꢃꢁ, ꢀꢃ8
- Domain Enroll ꢀꢃꢁ
- USB to PC 108, ꢀꢃꢁ
- Wi-Fi 151, ꢀꢃꢁ
- Wireless LAN 150, ꢀꢃ4
Settings (Personal tab)
- Buttons ꢀꢂ9
- Task Manager ꢀꢃꢀ, ꢀ80
- TouchFLO 45, 8ꢂ, ꢀꢃꢀ
- Windows Update ꢀꢃꢀ, ꢀ88
Settings tab (Home screen) 84
SIM Access Profile (SAP) ꢂꢂ
SIM card
- install ꢀ8
- PIN ꢀ8ꢁ
- Input ꢀꢂ9
- Keyboard Sliding Sound ꢀꢂ9
- Lock ꢀꢃ0, ꢀ8ꢁ
- remove ꢀ9
SIM Manager
- about ꢀꢀ8, ꢀ49
- Menus ꢀꢃ0
- copy contacts to SIM card ꢀ49
- copy SIM contacts to device ꢀ49
- create SIM contact ꢀ49
Sleep mode ꢁ5
- Owner Information ꢀꢃ0
- Phone ꢀꢃ0, ꢀꢃꢂ, ꢀꢃ8
- Sounds & Notifications ꢀꢃ0, ꢀꢃꢃ
- Today ꢀꢃ0
Smart Dial ꢂ4
Settings (System tab)
- About ꢀꢃ0, ꢀꢃꢂ
- Certificates ꢀꢃ0
- Clear Storage ꢀꢃ0, ꢀ8ꢃ
- Clock & Alarms ꢀꢃ1, ꢀꢃ4, ꢀꢃꢃ
- Customer Feedback ꢀꢃ1
- Device Information ꢀꢃ1
- Encryption ꢀꢃ1, ꢀ84
- Error Reporting ꢀꢃ1
- External GPS ꢀꢃ1
SMS ꢃ4, 11ꢁ, 1ꢀ9
Soft reset ꢀ8ꢂ
Sounds & Notifications ꢀꢃ0, ꢀꢃꢃ
Spb GPRS Monitor ꢀꢀ9, ꢀ51
Speakerphone 5ꢂ
Specifications ꢀ9ꢀ
Speed Dial 58
Sprite Backup ꢀꢀ9, ꢀ54
Start menu 45
Status icons 41
- Long Press End Key ꢀꢃ1
- Managed Programs ꢀꢃ1
- Memory ꢀꢃ1
STK (SIM Tool Kit) Service ꢀꢀ9
Storage card
- encrypt ꢀ84
- Microphone AGC ꢀꢃ1
- install ꢁ1
Index ꢁ09
Streaming Media 1ꢂꢁ, ꢀꢀ9
Swap/switch calls 5ꢂ
Synchronize
U
USB modem 1ꢃ1
USB to PC 109, ꢀꢃꢁ
- ActiveSync 10ꢃ
- change information types 108
- music and videos 110
- via Bluetooth 109
- Windows Media Player ꢀ1ꢁ
- Windows Mobile Device Center 10ꢁ
- with computer 84, 10ꢃ
- with Exchange Server 84, 1ꢁꢂ
V
Vibrate 44, 48, 5ꢃ, ꢀꢃꢃ
Video call
- about ꢂ0
- answer video call ꢂ0
- end video call ꢂ1
- make video call ꢂ0
- settings ꢂ1
T
Video capture mode 195
Voice call
- about 5ꢁ
- answer call 54
- end call 5ꢃ
- make call 5ꢁ
Voice Commander
- overview ꢀ58
- voice tag for contact ꢀ59
- voice tag for program ꢀꢂ0
Voice Commander Settings ꢀꢃ0
Voicemail 54
T9 94
Task Manager ꢀꢃꢀ, ꢀ80
Tasks ꢀꢀ9, ꢀ5ꢃ
Text messages
- copy from SIM card 11ꢂ
- copy to SIM card 115
- create new message 11ꢁ
- Messages tab (Home screen) ꢃ4
- send 114
Text size (screen) ꢀꢃ5
TouchFLO ꢁD ꢂꢃ
Transcriber 98
Voice Recorder ꢀꢀ9, ꢀꢂ0
Troubleshoot
- sync connection 108
- Windows Media Player Mobile ꢀ1ꢂ
Turn device on and off ꢁ4
Turn phone function on and off ꢀ40
Turn the phone function on and off 59
TV Out ꢀꢃꢀ, ꢀ8ꢀ
W
Weather tab (Home screen) 8ꢀ
Wi-Fi 148, ꢀ41
Windows Live 1ꢂ5, ꢀꢀ9
Windows Live Messenger 1ꢂꢃ, ꢀꢀ8
Windows Media Player Mobile
- about ꢀꢀ9
ꢁ10 Index
- file formats ꢀ11
- menus ꢀ1ꢀ
- playlists ꢀ1ꢂ
- troubleshoot ꢀ1ꢂ
Windows Mobile Device Center 10ꢁ
Windows Update ꢀꢃꢀ, ꢀ88
Word Mobile ꢀꢀꢂ, ꢀ4ꢁ
WorldCard Mobile ꢀꢀ9, ꢀꢂꢀ
Y
YouTube 158, ꢀꢀ9
Z
ZIP
- about ꢀꢀ9, ꢀꢂ5
- create archive ꢀꢂꢂ
- open zip file and extract files ꢀꢂ5
Zooming
- Camera 199
- finger gestures 8ꢂ
|