HP Hewlett Packard HP StorageWorks MSA60 Hard Drive Array 418408 B21 User Manual

QuickSpecs  
Overview  
HP 60 Modular Smart Array  
The HP 60 Modular Smart Array enclosure is a 2U Serial Attach SCSI (SAS) disk drive storage enclosure supporting 3.5 inch SAS,  
Serial ATA (SATA) and SAS Midline (MDL) drives. This enclosure delivers industry-leading data performance, availability, storage  
density, and upgradeability to meet customers' demanding and growing storage needs. This enclosure is designed to support 3.5  
inch Universal SAS, SATA or SAS MDL hard drive form factors. The MSA60 enclosure supports direct attach storage (DAS) to HP  
ProLiant and HP Integrity Servers. The MSA60 supports the cascading of shelves in a 1+3 configuration to allow a maximum of 48  
drives in an 8U configuration behind each of the two external ports on the HP Smart Array P800, the HP Smart Array E500, HP  
Smart Array P411 or the HP Smart Array P812 Controllers for a total of 96 drives in 8 enclosures (this single controller port  
incorporates four lanes for a total max throughput of 12Gb/s for SAS). On HP ProLiant servers Dual Domain support is available for  
the HP Smart Array P800 attached to a MSA60 with the addition of the HP Dual Domain I/O Module Option (AG779A). (Single  
initiator environment only). (NOTE: Smart Array P411 and P812 Controllers are supported on ProLiant servers only).  
The MSA60 also supports the HP Smart Array P600 and the HP Smart Array P212 Controllers. Behind the single external port on the  
HP Smart Array P600 or the P212 Controllers 1+3 cascading allows a maximum of 48 drives in an 8U configuration. (NOTE:  
Smart Array P212 Controller is supported on ProLiant servers only).  
For HP-UX and Open VMS environments on HP Integrity Servers the MSA60 supports the HP (AH303A) SC44Ge Host Bus Adapter  
with the addition of the HP Dual Domain I/O Module Option (AG779A). Behind the single external port on the HP (AH303A)  
SC44Ge Host Bus Adapter 1+3 cascading allows a maximum of 48 drives in an 8U configuration. The HP (AH303A) SC44Ge Host  
Bust Adapter will only support HP-UX and Open VMS environments and will be available on all rack mounted HP Integrity Servers  
with PCIe slots.  
The addition of the I/O Module with the HP SC44Ge Host Bus Adapter adds support for Multi Initiator JBOD Clusters. It will support  
HP-UX and Open VMS on selected HP Integrity servers only. The MSA60 with the I/O Module and the HP SC44Ge Host Bus Adapter  
will not support ProLiant servers. Multi Initiator JBOD clusters are supported with dual port SAS drives only.  
Support for HP Serviceguard software on HP-UX with HP-UX 11iv2/11iv3 only.  
HP Serviceguard monitors the health of each node and rapidly responds to failures in a way that minimizes or eliminates application  
downtime.  
NOTE: HP Integrity servers that are supported:  
rx2660, rx3600, rx6600, rx7640, rx8640, Superdome sx2000 (only the version that support PCI-e cards)  
What's New  
Introducing support for the new HP Smart Array Controller for the MSA60 with ProLiant servers  
HP Smart Array P812 Controller/1G Flash Backed Cache Controller  
Introducing support for new drives  
HP 2 TB 3G SATA 7.2K LFF (3.5 inch) MDL HDD  
HP 1 TB 6G SAS 7.2K LFF (3.5 inch) DP MDL HDD  
HP 2 TB 6G SAS 7.2K LFF (3.5 inch) DP MDL HDD  
DA - 12627  
North America — Version 37 — June 8, 2011  
Page 1  
QuickSpecs  
Overview  
HP 60 Modular Smart Array  
At A Glance  
2U rackmount form factor  
3 Gb/s SAS host connectivity  
Dual Domain support with HP Smart Array P800 Controller for HP ProLiant and Integrity servers (requires dual port SAS  
drives)  
Multi Initiator support with the SC44Ge Host Bus Adapter (AH303A) (HP-UX and Open VMS on selected HP Integrity Servers)  
with dual port SAS drives only  
Supports HP SAS single port and dual port 3G SAS disk drives, (72 GB, 146 GB, 300 GB & 450 GB 15K & 400 GB 10K  
capacities) and 6G DP SAS disk drives (300GB, 450GB & 600GB 15K capacities)  
Ability to support HP SAS dual port MDL (Midline) 6G disk drives (1 TB and 2 TB capacities)  
Compatible with HP SATA 3G disk drives, (500 GB, 1 TB and 2 TB capacities)  
Maximum storage capacity of 7.2 TB (with twelve HP SAS 6G 600 GB hard drives) or 24 TB (with twelve HP SATA 3G 2 TB  
hard drives or 2 TB SAS MDL drives)  
1+3 Cascade support (behind a single SAS port)  
Supports boot from storage  
Redundant hot-plug power supplies and fans standard  
Addition of second I/O Module adds Dual Domain capability providing higher level of redundancy and reliability  
DA - 12627  
North America — Version 37 — June 8, 2011  
Page 3  
QuickSpecs  
Standard Features  
HP 60 Modular Smart Array  
Modular Smart Array  
Family  
The HP Modular Smart Array family delivers simple, affordable storage technology to meet today's  
demanding and growing IT needs. These storage solutions offer the best price/performance and best  
price/availability features for direct attach environments, small clusters, workgroups and entry-level SAN  
environments. Each solution is designed for easy deployment, secure operation, and reduced  
management costs while driving rapid return on investment.  
MSA60  
The HP MSA60 Enclosure (hereafter referred to as "MSA60") is a disk drive storage enclosure with 3G  
SAS host connectivity. These enclosures deliver industry-leading availability, storage density, and  
upgradeability to meet customers' demanding and growing storage needs. The MSA60 delivers the ideal  
mix of low-cost and high capacity, for minimum I/O workloads such as reference data, archival, and  
disk-to-disk backup.  
Key Features  
2U rackmount form factor  
SAS host interface  
Dual Domain support with HP Smart Array P800 Controller (requires dual port SAS drives)  
Multi Initiator support with the SCG44e Host Bus Adapter (AH303A) (HP-UX and Open VMS on  
selected HP Integrity Servers) with dual port SAS drives only  
Supports twelve 3.5-inch hot pluggable drives  
Ability to support, 72 GB ,146 GB, 300 GB & 450 GB 15K and 400 GB 10K 3.5 inch 3G SAS  
single port and dual port drives, and 300GB, 450GB & 600GB 6G SAS dual port drives  
Ability to support HP 6G SAS dual port MDL (Midline) disk drives (1 TB & 2 TB capacities)  
Compatible with HP SATA 3G disk drives, (250 GB, 500 GB, 750 GB, 1 TB & 2 TB capacities)  
Modular design  
1+3 Cascade support (behind a single SAS port)  
SATA 3G - Delivering data transfer rates greater than 100 MB/s  
Provides storage capacity of up to 7.2 TB per enclosure using 6G , 600GB DP SAS disk drives  
Provides storage capacity of up to 24 TB per enclosure using 2 TB SATA disk drives or 2 TB SAS  
MDL HDD  
Hot pluggable disk drives, power supplies, and fans  
Redundant fans and power supplies ship as standard equipment with base enclosure  
Each MSA60 enclosure comes with dual power supplies that are sufficient to provide power to the  
enclosure and maintain normal operating levels  
Integrated Environmental Monitoring - Monitors environmental conditions within the enclosure  
and components such as the power supply, fans and temperature  
Easy removal of parts provides better serviceability. No tools are required!  
Supports MS Windows 2003, MS Windows 2008, Red Hat Linux, SUSE Linux, Novell NetWare,  
HP-UX 11iv2 and 11iv3, Open VMS 8.3 1H  
Supported with Smart Array P800, the Smart Array E500, the Smart Array P600, the Smart Array  
P411, the Smart Array P212 or the HP Smart Array P812 Controller for HP ProLiant Servers and  
HP Integrity Servers in a single initiator environment. (NOTE: Smart Array P411, P212 & P812  
Controllers are supported on ProLiant servers only).  
Attached to HP SC44Ge Host Bus Adapter for HP-UX and Open VMS support on selected HP  
Integrity Servers (servers that support PCI-e cards)  
Supported with ACU, ORCA and HP Systems Insight Manager through configuration utilities  
provided via the Smart Array controller  
RoHS compliant  
3 year limited warranty (MSA60 enclosure only)  
Pre-Failure warranty that covers SAS and SATA disk drives (See note below)  
DA - 12627  
North America — Version 37 — June 8, 2011  
Page 4  
QuickSpecs  
Standard Features  
HP 60 Modular Smart Array  
NOTE: Customer must be running HP Systems Insight Manager in order to qualify for Pre-Failure  
warranty. The enclosure is only covered for the warranty period of the drive (3 years for SAS and 1 year  
for SAS Midline (MDL) and SATA drives).  
DA - 12627  
North America — Version 37 — June 8, 2011  
Page 5  
QuickSpecs  
Product Highlights  
HP 60 Modular Smart Array  
High Levels of Storage  
Density, Data Protection,  
and Functionality  
Storage Capacity - The MSA60 enclosure supports up to 12 SAS drives for a maximum capacity  
of 7.2 TB SAS drives or 24 TB with SATA or SAS MDL drives  
Data Protection - MSA60 is designed for a high level of data protection. It includes redundant  
fans and power supplies (standard), and support for various RAID level including RAID6 with ADG  
(depending upon the Smart Array Controller used)  
                                                           
                                                            
                                                              
                                                               
                                                                 
                                                                   
                                                                     
                                                                        
                                                                          
                                                                            
                                                                             
                                                                               
                                                                                
                                                                                 
Dual Domain - Dual domain SAS creates redundant pathways from servers to storage devices.  
The redundant paths created by these configurations reduce or eliminate single points of failure  
within the storage network. This provides increased levels of high availability with redundant paths  
from the controller to the drives.  
Storage Manageability - The MSA60 features familiar configuration and management tools such  
as Array Configuration Utility (ACU) and HP Systems Insight Manager (SIM). Online Management  
Features include: Online Capacity Expansion, Online RAID Level Migration, Online Stripe Size  
Migration, Online Spares (Global)  
Choice of Computing Platform - The MSA60 is designed and qualified for HP ProLiant and HP  
Integrity servers  
Advanced Data Guarding (RAID 6 with ADG) Fault Tolerance - It allocates two sets of parity data  
across drives and allows simultaneous write operations. This level of fault tolerance can withstand  
two simultaneous drive failures without downtime or data loss.  
Low Total Cost of  
Ownership  
The modular, scalable design of the MSA60 provides an extremely flexible platform. You can buy what  
you need today and purchase additional capacity as your data storage needs grow, instead of making a  
large up-front investment. Additional drives and enclosures can be easily added as your needs dictate.  
Cascading - The MSA60 has the unique capability of cascading up to 4 - four enclosures behind  
a single SAS port (depends on the Smart Array Controller).  
Tiered Storage - MSA60 supports mixing SAS and SATA drives in the same enclosure, allowing  
you to more effectively utilize mission critical storage where you need it most.  
Universal SATA Hard Drive - Since the MSA60 supports HP Universal SATA drives, your  
investment in disk drives is protected and cost is minimized as you add new drives.  
Pre-Failure Warranty - Drives installed in a MSA60 and monitored under HP Systems Insight  
Manager are supported by a Pre-Failure (replacement) Warranty (3 years for SAS and 1 year for  
SAS MDL and SATA drives). Pre-Failure Warranty allows for the replacement of designated drives  
in MSA60 before they actually fail when using HP Systems Insight Manager on HP ProLiant or HP  
Integrity servers.  
NOTE: Some operating systems may not support all of these features.  
Integrated Configuration and Management Tools - The MSA60 utilizes the standard, integrated  
set of Smart Array management and utility software for HP ProLiant Servers. These tools  
consistently lower the cost of ownership by reducing training and technical expertise necessary to  
install and maintain HP server storage. HP-UX and Open VMS uses HP Integrity ODE for storage  
enclosure support.  
DA - 12627  
North America — Version 37 — June 8, 2011  
Page 6  
QuickSpecs  
MSA60 Components  
HP 60 Modular Smart Array  
MSA60 Enclosure  
The 2U array houses up to twelve 3.5 inch Universal hot pluggable SAS or SATA drives.  
Each MSA60 includes the following standard components:  
MSA60 base enclosure with redundant power supplies and fan modules  
Rack mounting hardware kit  
0.5m mini-SAS cable  
Two AC power cords and two PDU interconnect cords  
Smart Array P800  
Features  
HP's highest performing 16-port PCI-express controller with expander support  
Expander support enables the addition of external storage, allowing increased number of drives  
for increased performance  
Provides highest level of data protection standard by using RAID 6 with Advanced Data Guarding  
Supports a maximum total of 104 hard drives (96 drives across eight enclosures plus 8 drives in  
the server internal backplane)  
Supported in a single initiator environment  
For more information see:  
Smart Array E500  
Features  
HP's first external connect only PCI Express (PCIe) Serial Attached SCSI (SAS) RAID controller  
Expander support enables the addition of external storage, allowing increased number of drives  
for increased performance  
Offers RAID 0, 1 & 0+1 and can be upgraded with battery-backed write cache (BBWC) module  
for RAID 5  
Supports a maximum total of 108 hard drives  
Supported in a single initiator environment  
Formore information see:  
Smart Array P411  
Features  
The HP Smart Array P411 is HP's PCI Express (PCIe) Serial Attached SCSI (SAS) RAID controller  
Low profile, half height card has 8 ports and utilizes DDR2-800 memory  
The P411 is ideal for RAID 0/1, 5, 1+0 & 5+0 and can be upgraded with the 512MB battery-  
backed write cache (BBWC) module and Smart Array Advanced via license key for RAID 6 &, 6 +  
0, 50 and 60  
For more information see:  
Smart Array P212  
Features  
The HP Smart Array P212 is HP's entry level PCI Express (PCIe) Serial Attached SCSI (SAS) RAID  
controller  
The Low Profile, Half Height card has 8 ports and utilizes DDR2-266 memory  
The P212 is ideal for RAID 0/1, 1+0 and can be upgraded with the 256MB battery-backed write  
cache (BBWC) module for RAID 5, 5+0  
For more information see:  
DA - 12627  
North America — Version 37 — June 8, 2011  
Page 7  
QuickSpecs  
MSA60 Components  
HP 60 Modular Smart Array  
Smart Array P812  
Features  
The HP Smart Array P812 provides superior RAID performance, while delivering high levels of  
connectivity, reliability, and many advanced features  
Increased connectivity with 8 internal ports and 16 external ports.  
1 G 72-bit wide DDR2-800 flash-backed write cache (FBWC).  
Smart Array Advanced Pack (SAAP) license key included standard  
For moreinformation see:  
HP (AH303A) SC44Ge  
Host Bus Adapter  
SAS technology delivers high performance and data bandwidth up to 3 Gbps per physical link.  
PCI Express x8 capable  
PCIe x8 (2.5 GB/s bandwidth)  
Supported in a Multi Initiator environment  
RAID  
Several fault tolerant configurations keep data available and servers running while drives are being  
replaced – RAID levels that offer fault tolerance include:  
RAID 50 (RAID 5+0) protects against failure of one drive (and failure of particular multiple  
drives). RAID 50 is a nested RAID method that uses RAID 0 striping across RAID 5 arrays. RAID 50  
tolerates one drive failure in each spanned array without loss of data. RAID 50 requires less  
rebuild time than single RAID 5 arrays RAID 50 requires a minimum of six drives.  
RAID 60 (RAID 6+0) allows administrators to split the RAID 6 storage across multiple external  
boxes. RAID 60 requires a minimum of eight drives. RAID 60 is a nested RAID method that uses  
RAID 0 block-level striping across multiple RAID 6 arrays with dual distributed parity. With the  
inclusion of dual parity, RAID 60 will tolerate the failure of two disks in each spanned array  
without loss of data.  
RAID 6 with ADG: Allocates the equivalence of two parity drives across multiple drives and allows  
simultaneous write operations.Distributed Data Guarding (RAID 5): Allocates parity data across  
multiple drives and allows simultaneous write operations.Drive Mirroring (RAID 1 and 1+0 Striped  
Mirroring): Allocates half of the drive array to data and the other half to mirrored data, providing  
two copies of every file.  
Dual Domain (NEW)  
Dual domain SAS creates redundant pathways from servers to storage devices. The redundant paths  
created by these configurations reduce or eliminate single points of failure within the storage network.  
This provides increased levels of high availability with redundant paths from the controller to the drives.  
Dual domain SAS implementations make it possible to tolerate host bus adapter (HBA) failure, external  
cable failure, expander failure, failure in a spanned disk (JBOD) environments.  
DA - 12627  
North America — Version 37 — June 8, 2011  
Page 8  
QuickSpecs  
Software Components  
HP 60 Modular Smart Array  
Utilities  
The MSA60 utilizes a single, consistent set of utility software for storage and RAID management, setup,  
configuration and troubleshooting. This consistency reduces the cost of ownership by reducing the  
training and technical expertise necessary to install and maintain your HP server storage solution.  
Configuration Utilities  
Array Configuration Utility (ACU) [On-line for Microsoft and Linux, Remote Web-Based & Off-line]  
Option ROM Configuration for Arrays (ORCA), NetWare ACU CPQONLIN (only online support no Web  
based support)  
Management/Health  
Utilities  
HP Systems Insight Manager  
Array Configuration Utility  
(ACU)  
Provides a graphical view of HP drive array configurations.  
Easy to use Wizards for configuration.  
Web Based ACU supports On-Line, Remote Web Based and Off-line configuration.  
Supports on-line configuration for Microsoft, NetWare and Linux.  
HP Systems Insight  
Manager  
Powerful storage, server and server option management tool.  
Monitor storage from a remote central location.  
Browser based Insight Manager 7 provides full access from anywhere on the Intranet, eliminating  
the need for a dedicated Insight Manager console.  
Supported Operating  
Systems  
HP ProLiant Servers  
NOTE: For information on supported Operating Systems, please see the following Smart Array  
Quickspecs:  
HP Integrity Servers  
HPUX 11iv2/11iv3  
Open VMSV 8.3 1H  
NOTE: HPUX 11iv2/11iv3 (for Dual Domain only)  
Needs I/O Module (#AG779A), and HP SC44Ge Host Bus Adapter or HP Smart Array P800  
Controller  
Qualified for the following HP Integrity servers:  
rx2660, rx3600, rx6600, rx7640, rx8640, Superdome sx2000 (only the version that support PCI-  
e cards)  
NOTE: Open VMS (for Dual Domain only)  
Needs I/O Module (#AG779A), and HP (AH303A) SC44Ge Host Bus Adapter  
Qualified for the following HP Integrity servers:  
rx2660, rx3600, rx6600, rx7640, rx8640, Superdome sx2000 (only the version that support PCI-  
e cards)  
DA - 12627  
North America — Version 37 — June 8, 2011  
Page 9  
QuickSpecs  
Service and Support, HP Care Pack, and Warranty Information  
HP 60 Modular Smart Array  
Service and Support  
Three-year limited parts only warranty, including hardware diagnostic support, pre-failure warranty  
(coverage of hard drives, memory and processors). The warranty is fully supported by HP Services and a  
worldwide network of resellers and service providers. In addition 90-day's getting started software  
telephone support may be covered under the warranty or available for an additional fee. Enhancements  
to warranty services are available through HP Care Pack services.  
NOTE: The MSA60 has a limited 3 year parts only warranty. The SAS drives have a 3 year warranty. SAS  
MDL and SATA drives have a 1 year warranty  
Care Pack services provide a range of life cycle support options that let you choose the service levels that  
meet your business requirements, from basic to mission-critical.  
A full range of HP Care Pack hardware and software services are available including:  
Installation and start up  
Education courses  
Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24 hours, 7  
days call window with options including 4-hour response or 6-hour Call To Repair  
Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials  
solutions helping to deliver high level of application availability. Response times range from 30  
minutes for critical problems to 2 hours.  
System Management, Performance Services and Mission Critical Support Solution  
Service includes HP branded hardware options qualified for the storage enclosure, purchased at the  
same time or afterwards, internal to the enclosure. These will be covered at the same service level and  
coverage period as the storage enclosure.  
NOTE: For more information on HP Care Pack services, contact any of our worldwide sales offices or  
NOTE: For more complete information on HP Services offerings, customers and resellers, please visit us  
NOTE: Additional information regarding worldwide limited warranty and technical support is available  
HP Care Pack Information Flexible Support  
1 Year Support  
HA101A1-87G  
HA103A1-87G  
HA104A1-87G  
HA105A1-87G  
HA109A1-87G  
HA110A1-87G  
HA111A1-87G  
HA112A1-87G  
HA101A3-87G  
HA103A3-87G  
HA104A3-87G  
HA105A3-87G  
HA109A3-87G  
3 Year Support  
DA - 12627  
North America — Version 37 — June 8, 2011  
Page 10  
QuickSpecs  
Service and Support, HP Care Pack, and Warranty Information  
HP 60 Modular Smart Array  
HA110A3-87G  
HA111A3-87G  
HA112A3-87G  
HA101A4-87G  
HA103A4-87G  
HA104A4-87G  
HA105A4-87G  
HA109A4-87G  
HA110A4-87G  
HA111A4-87G  
HA112A4-87G  
HA101A5-87G  
HA103A5-87G  
HA104A5-87G  
HA105A5-87G  
HA109A5-87G  
HA110A5-87G  
HA111A5-87G  
HA112A5-87G  
HA113A1-564  
UF297E  
4 Year Support  
5 Year Support  
Installation & Start-Up  
Fixed Care Packs  
HP 1Y NBD,9X5 MSA60 HW Support  
HP 1Y 4h 13x5 MSA60 HW Support  
HP 1Y 4h 24x7 MSA60 HW Support  
HP 1y 6h CTR MSA60 HW Support  
HP 3y NBD 9x5 MSA60 HW Support  
HP 3y 4h 13x5 MSA60 HW Support  
HP 3y 4h 24x7 MSA60 HW Support  
HP 3y 6h CTR MSA60 HW Support  
HP 1y PW NBD MSA60 HW Support  
HP 1y PW 4h 13x5 MSA60 HW Support  
HP 1y PW 4h 24x7 MSA60 HW Support  
HP 1y PW 6h CTR MSA60 HW Support  
Hardware Installation, Electronic  
UF298E  
UF299E  
UF300E  
UF301E  
UF302E  
UF303E  
UF304E  
UF305PE  
UF306PE  
UF307PE  
UF308PE  
U8132E  
DA - 12627  
North America — Version 37 — June 8, 2011  
Page 11  
QuickSpecs  
Configuration Information  
HP 60 Modular Smart Array  
Step 1: Base Configuration  
Model  
Shipping Dimensions  
Part Number  
418408-B21  
AG779A  
MSA60  
HP 60 Modular Smart Array  
I/O Module  
HP Modular Dual Domain I/O Module Option Kit  
NOTE: The I/O Module is a field upgradeable Option Kit the addition of which in the  
MSA60 will allow dual domain capability providing higher level of redundancy and  
reliability.  
HP Smart Array P800 Controller (381513-B21) supports Dual Domain on the  
MSA60 with the addition of the HP Dual Domain I/O Module in a single  
initiator environment.  
Requires Dual port SAS drives  
HP (AH303A) SC44Ge Host Bus Adapter supports Dual Domain on the MSA60  
with the addition of the HP Dual Domain I/O Module in a Multi Initiator  
environment. Supports only HP-UX and Open VMS and on selected HP Integrity  
Servers only.  
MSA60 SAS MDL Dual  
Port drive bundle  
HP MSA60 5.4TB SAS DP HDD Bundle (MSA60 w/12 450GB 15K SAS LFF DP HDD  
+ Additional I/O Module)  
AP713A  
AP714A  
AJ922A  
HP MSA60 12 TB SAS DP MDL HDD Bundle (MSA60 w/12 1 TB 7.2K SAS Midline  
(MDL) DP HDD + Additional I/O Module)  
MSA60 Americas bundles HP MSA60 w/ Dual Domain I/O Module, (12) 3.5-in. 300GB SAS Drives w/ cable  
NOTE: available in USA & Solution  
Canada only  
(1) HP MSA60 Modular Smart Array Enclosure;  
(1) HP Modular Dual Domain I/O Module Option Kit;  
(12) HP 300GB 3G 15K SAS 3.5" DP HDD;  
(1) Mini SAS 4x2M Cable All  
HP MSA60 w/ (12) 1TB 3.5-in. LFF 7.2K rpm SATA MDL Drives w/ cable Solution  
AJ924A  
(1) HP MSA60 Modular Smart Array Enclosure;  
(12) HP 1TB 3G SATA7.2K 3.5"MDL HDD;  
(1) Mini SAS 4x2M Cable All  
DA - 12627  
North America — Version 37 — June 8, 2011  
Page 12  
QuickSpecs  
Configuration Information  
HP 60 Modular Smart Array  
Step 2: Array Controllers  
Description  
Part Number  
Smart Array Controllers HP ProLiant Servers  
Supported  
HP Smart Array P800 controller  
381513-B21  
435129-B21  
337972-B21  
487204-B21  
462830-B21  
462832-B21  
572531-B21  
462834-B21  
(Single Domain)  
HP Smart Array E500 controller  
HP Smart Array P600/256 BBWC Controller  
HP Smart Array P812 Controller/ 1G Flash Backed Cache Controller  
HP Smart Array P411/256MB Controller  
HP Smart Array P411/512MB BBWC  
HP Smart Array P411/1G FBWC Controller  
HP Smart Array P212/256MB Controller  
HP Integrity Servers  
HP Smart Array P800 controller  
AD335A  
AH226A  
HP Smart Array E500 controller  
HP Smart Array P600/256 BBWC Controller  
337972-B21  
NOTE: The HP Smart Array P800 supports the cascading of shelves in a 1+3  
configuration to allow a maximum of 48 drives in an 8U configuration behind or the  
HP Smart Array P800 controller for a total of 96 drives on the two external ports.  
NOTE: Dual Domain is support for the HP Smart Array P800 controller (single  
initiator only)  
NOTE: The HP Smart Array P600 supports the cascading of shelves in a 1+3  
configuration to allow a maximum of 48 drives in an 8U configuration behind or the  
HP Smart Array P600 controller as the P600 has only a single external port.  
NOTE: The Smart Array E500 offers RAID 0, 1 and 0+1 and can be upgraded with  
ProLiant server to RAID 5 with battery-backed write cache (BBWC) module - 383280-  
B21.  
NOTE: Smart Arrays P411 and P212 are supported on ProLiant servers only  
Smart Array Controllers HP ProLiant Servers  
Supported  
HP Smart Array P800 controller  
381513-B21  
AH303A  
(Dual Domain)  
HP Integrity Servers  
HP SC44Ge Host Bus Adapter  
NOTE: Only HP-UX and Open VMS on selected HP Integrity servers supported.  
HP Integrity servers that are supported:  
rx2660, rx3600, rx6600, rx7640, rx8640, Superdome sx2000 (only the version that  
support PCI-e cards).  
DA - 12627  
North America — Version 37 — June 8, 2011  
Page 13  
QuickSpecs  
Configuration Information  
HP 60 Modular Smart Array  
Step 3: Choose HP ProLiant Server(s)/HP Integrity Server(s)  
Server Compatibility  
HP ProLiant Servers  
For up to date compatibility, please see the following URL for complete Smart Array P600,  
P800,E500,P411, P212 & P812 Controller compatibility and support information:  
HP Integrity Servers  
HP Integrity Server rx2660 with combination PCIx/PCIe riser only  
HP Integrity Server rx3600 with combination PCIx/PCIe backplane only  
HP Integrity Server rx6600 with combination PCIx/PCIe backplane only  
HP integrity Server rx7640 with combination PCIx/PCIe only  
HP integrity Server rx8640 with combination PCIx/PCIe only  
HP integrity Server sx2000 with combination PCIx/PCIe only  
NOTE: HP Integrity Server home:  
Step 4: Choose Hard Drives  
SAS Drives  
6G LFF Serial Attached SCSI (SAS) Hard Drives  
HP 300GB 6G SAS 15K LFF (3.5-inch) DP ENT HDD  
HP 450GB 6G SAS 15K LFF (3.5-inch) DP ENT HDD  
HP 600GB 6G SAS 15K LFF (3.5-inch) DP ENT HDD  
516814-B21  
516816-B21  
516828-B21  
NOTE: 6G SAS drives will work in 3G systems like the MSA60. 6G SAS drives will  
only function as 3G drives in a MSA60.  
NOTE: 6G SAS drives will only function as 3G drives in a MSA60  
HP 1TB 6 GB SAS 7.2K LFF (3.5 inch) DP MDL HDD  
HP 2TB 6 GB SAS 7.2K LFF (3.5 inch) DP MDL HDD  
HP 2 TB 3G SATA 7.2K LFF (3.5-inch) MDL HDD  
SAS MDL (Midline)  
SATA Drives  
507614-B21  
507616-B21  
507632-B21  
454146-B21  
458928-B21  
HP 1 TB 3G 7.2K 3.5-inch SATA MDL HDD  
HP 500 GB 3G SATA 7.2K LFF (3.5-inch) SATA MDL HDD  
NOTE: The following PN#s for SATA drives have been replaced by new PN#s:  
250GB: New PN# 458926-B21 replaces Old PN# 349239-B21  
500GB: New PN# 458928-B21 replaces Old PN# 394573-B21  
750GB: New PN# 458930-B21 replaces Old PN# 432341-B21  
NOTE: SATA drives are not Dual Port drives  
NOTE: There is a known compatibility issue with some early 3.5 inch SATA HDD that  
will make them unable to be used with the MSA20/60. Customers should verify that  
they are not using hard drive part number 356536-002/003 (spare 353044-001).  
The following SATA hard drives require SATA FirmWare flash in order to work  
properly. They are:  
500GB SATA 1.5 - Model # 6H500F0, min F/W rev: HA431DD0  
80GB RoHS Mask Rom SATA 1.5, Model # 6L080M0, min F/W rev BACE1GG0  
160GB RoHS Mask Rom SATA 1.5, Model # 6L160M0, min F/W rev BACE1GG0  
250GB RoHS Mask Rom SATA 1.5, Model # 6L250S0, min F/W rev BACE1GG0  
DA - 12627  
North America — Version 37 — June 8, 2011  
Page 14  
QuickSpecs  
Configuration Information  
HP 60 Modular Smart Array  
NOTE: Go to the HP Hard Drive Compatibility table for complete drive compatibility  
unsupported configurations will result in voiding the warranty and could result in  
damage to the drive and/or loss of data.  
Step 5: Choose Rack Option  
HP Racks  
HP Universal Rack 10642 G2 Pallet ALL  
HP Universal Rack 10642 G2 Shock Rack  
HP Universal Rack 10642 G2 Crated ALL  
HP Universal Rack 10642 G2 w/Ext Shock Rack  
HP Universal Rack 10636 G2 Pallet ALL  
HP Universal Rack 10636 G2 Shock Rack  
HP Universal Rack 10636 G2 Crated ALL  
HP Universal Rack 10636 G2 w/Ext Shock Rack  
HP 10642 G2 200mm Extn Shock Rack  
HP 10647 G2 200mm Extn Shock Rack  
HP Rack S10614 (14U) Rack Cabinet – Shock Pallet  
AF001A  
AF002A  
AF003A  
AF004A  
AF011A  
AF012A  
AF013A  
AF014A  
AF034A  
AF044A  
292302-B22  
Step 6: Choose Cables  
Cable Options  
Cables used for connecting the HP Smart Array P800/512 BBWC Controller (P/N  
381513-B21 or AD335A) the HP Smart Array E500 (P/N 435129-B21 or AH226A),  
the HP Smart Array P212 (P/N 462834-B21), the HP Smart Array P411 (P/Ns  
462830-B21 or 462832-B21) or the P812 (P/Ns 487204-B21) to MSA60  
Mini SAS 4x 2M Cable All  
Mini SAS 4x 4M Cable All  
Mini SAS 4x 6M Cable All  
407339-B21*  
432238-B21*  
432239-B21*  
*#0D1 will appear after this part number on your sales order if factory integration is  
indicated.  
Cables used for connecting the HP Smart Array P600/512 BBWC Controller (P/N  
337972-B21) or the HP SC44Ge Host Bus Adapter (P/N AH303A) to MSA60  
SAS 4x to Mini SAS 4x 2M  
SAS 4x to Mini SAS 4x 4M  
SAS 4x to Mini SAS 4x 6M  
419571-B21*  
419572-B21*  
419573-B21*  
*#0D1 will appear after this part number on your sales order if factory integration is  
indicated.  
DA - 12627  
North America — Version 37 — June 8, 2011  
Page 15  
QuickSpecs  
Technical Specifications  
HP 60 Modular Smart Array  
LED Indicators for HDDs Online (bottom)  
Drive Failure/ID (top)  
LED Indicators on Front Heartbeat LED  
Panel  
Fault LED  
UID button/LED  
LED Indicators on Rear I/O Module LED  
Panel  
UID button/LED  
Heartbeat LED  
Fault LED  
Power On/Standby button/system power LED  
Power supply LED  
Host Interface  
4 x wide SAS 3 Gb/s ports  
Maximum Number of  
Drives  
Up to 12 (twelve), 3.5 inch SAS, SATA or SAS MDL drives  
Temperature Range  
Relative Humidity  
Operating  
Shipping  
50° to 95° F (10° to 35° C)  
-40° to 150° F (-40° to 66° C)  
NOTE: Rated 1°C per 1000 feet of elevation to 10,000 ft.  
Operating  
10% to 90%  
Non-operating  
Up to 95%  
Input Power  
Requirements  
Rated Input Voltage  
Rated Input Frequency  
Rated Input Current  
Input Power (max)  
1175 Btu/hr*  
100 to 240 VAC  
50 to 60 Hz  
3.9A at110 VAC typical, 6A Maximum  
345 W  
Heat Dissipation  
(maximum)  
* Input Power and Heat Dissipation specifications are maximum values and apply to worst-case  
conditions at full rated power supply load. The power/heat dissipation for your installation will vary  
depending on the equipment configuration.  
RAID Support  
See Qucikspecs for Smart Array Controllers P600, P800, E500, P212, P411 & P812  
Upgradeable Firmware Yes, Offline only. Firmware updates available through hp.com  
Disk Drives and  
Enclosure Protocol  
Support  
HP 3.5 inch SAS 3 Gb/s  
I/O Module  
Connector Type  
IPass (mini-SAS)  
Number of Ports  
Two (one IN, other is OUT)  
MSA60 Enclosure  
2U Rack Form Factor  
Dimensions (HxWxD)  
Weight (base unit)  
Weight (with all drives)  
3.47 x 17.64 x 23.25 in (8.8 x 44.8 x 59 cm)  
34 lb (15.4 kg)  
54 lb (24.6 kg)  
DA - 12627  
North America — Version 37 — June 8, 2011  
Page 16  
QuickSpecs  
Technical Specifications  
HP 60 Modular Smart Array  
© Copyright 2011 Hewlett-Packard Development Company, L.P.  
The information contained herein is subject to change without notice.  
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and  
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial  
errors or omissions contained herein.  
For hard drives, 1 GB = 1 billion bytes. Actual formatted capacity is less.  
DA - 12627  
North America — Version 37 — June 8, 2011  
Page 17  

MTD 645B thru 651B User Manual
Motorola TETRA MTH800 User Manual
GE JGBP88WEK User Manual
Curtis KCR2613P User Manual
Creative 4X CD ROM Drives GCD R542B User Manual
Black & Decker DCM1400 User Manual
Black & Decker DCM680BF User Manual
Black & Decker 8501 Type 2 User Manual
Audiovox Rampage ACC31 User Manual
Aiwa NSX V9000 User Manual