Freedom9 freeStor 400 User Manual

freeStor  
400  
Quick Install Guide  
freedom to succeed  
Quick Install Guide for the freeStor 400  
Default Settings  
PACKAGE CONTENTS:  
freeStor 400  
Eight (8) drive clips  
Wireless Antenna  
Power adapter, 19V 7.89 A  
Power cord  
PARAMETER:  
password  
IP address 192.168.1.1 --> 192.168.1.100  
subnet mask --> 255.255.255.0  
DEFAULT SETTINGS:  
--> admin  
Ethernet cable, Cat 5  
CD-ROM with manual and utility  
This quick installation guide  
freeStor 400  
(NS400W)  
A. HARDWARE INSTALLATION:  
C. SETTING UP FILE SHARING:  
1. Remove the face plate on the front, by pulling from  
the bottom.  
2. Remove the 2 locking screws which hold the back  
plane on.  
3. Mount your hard drives to the rails.  
4. Slide the hard drives in,  
until the rails lock in place.  
5. You need to add at least  
one hard drive to access the  
NAS unit.  
1. Using the standard user / shared folders wizard.  
2. Create the user name and set the password, and click  
on next.  
3. Select the volume name from the share folder setting.  
4. Type the folder name in the new folder box, and set  
the permissions.  
5. Click on create to save the settings.  
6. From a users windows PC, go to Windows Explorer >  
Tools > Map Network Drive.  
7. Select the drive letter and type in the folder location  
on the freeStor 400.  
6. Replace the back plane  
Figure 1:  
Attaching the hard drive  
to the tray  
and lock it in place.  
7. Replace the face plate by  
8. Log into the shared folder using the assigned  
username and password.  
clicking it back in place.  
8. Connect the supplied RJ-45 cable to the back of the  
freeStor 400, and connect the other end into a switch /  
hub or directly into a PC.  
9. Connect the power cord from the adapter to the back  
of the unit.  
10. Toggle the power switch to on, from the back of the  
device.  
B. SYSTEM SETUP:  
1. To access the device, your computers IP address must  
be in the same subnet as the freeStor 400. Change your  
computers IP address to 192.168.1.99/255.255.255.0.  
2. Run the ez search.exe application found on the  
CD-ROM.  
3. The device will show up with its default name.  
4. Highlight the freeStor 400 and click on connect to  
webpage.  
5. Use admin for password.  
6. Once you log in, the wizard will automatically run and  
help you setup the freeStor 400:  
• Set the admin password  
• Set the time zone  
• Set the IP address (static or DHCP)  
• Name of storage device and description  
7. Once completed, click on restart, and the settings will  
be saved to the device.  
1-888-998-9189  
Revision 1.0 Specifications are subject to change without notice. Copyright 2008 Freedom9 Inc.  

Nexstar 3 User Manual
Nespresso Coffeemaker N90 User Manual
KitchenAid KCM534WH0 User Manual
Kenwood KDC W6527SE User Manual
Hitachi Computer Drive MK 96RD647 01 User Manual
Fujitsu MHR2020AT User Manual
Clickfree Backup Drive User Manual
Atmel AT85RFD 07 User Manual
ABB CL3020 User Manual
ABB ACS AP S User Manual