Table of Contents
Document Conventions . . . . . . . . . . . . . . . . 2
Basic Operations. . . . . . . . . . . . . . . . . . . . . 14
Summary of Basic Operations . . . . . . . . . . . . . . . . . . . . 14
Turning Your Phone On and Off . . . . . . . . . . . . . . . . . 14
Making Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Using Your Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . 16
Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Low Battery Power Alert . . . . . . . . . . . . . . . . . . . . . . . . 18
Setting the Display Language . . . . . . . . . . . . . . . . . . . . . 18
Setting the Ring Sound . . . . . . . . . . . . . . . . . . . . . . . . . 18
Setting the Ring Volume . . . . . . . . . . . . . . . . . . . . . . . . 19
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
System Dependent Network Features . . . . . . . . . . . . . . 19
International Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Guidelines for Safe and Efficient Use . . . . . 3
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Product Care and Operation . . . . . . . . . . . . . . . . . . . . . . .6
Battery Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Getting Started. . . . . . . . . . . . . . . . . . . . . . . . 8
Connecting and Removing Your Battery . . . . . . . . . . . . . .8
Charging Your Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Learning About Your Mobile Phone. . . . . . 10
Highlights of Your Mobile Phone . . . . . . . . . . . . . . . . . .10
Key Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Phone Display Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Display Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Problem Solving . . . . . . . . . . . . . . . . . . . . . 21
Problems and Possible Solutions . . . . . . . . . . . . . . . . . . 21
Displayed Messages and Explanations . . . . . . . . . . . . . . 21
Document Conventions
•
•
•
•
Menu names are shown in the following
typeface: MENUS.
•
•
When this guide instructs you to press a key, press
and release the key.
Submenu names are shown in the following type-
face: Submenu Names.
When this guide instructs you to press and hold a
key, press and hold the key for one to two seconds.
Keys names are shown in the following typeface:
CLR.
•
•
•
Press the down arrow when you see this symbol ( ).
Press the up arrow when you see this symbol ( ).
Text that is seen in the phone’s display is shown in
the following typeface: di s pl ays .
Your phone is at the Standby screen when it is pow-
ered On and a call is not in progress.
2
Document Conventions
Guidelines for Safe and Efficient Use
Since its introduction in the mid 1980s the mobile
phone is one of the most exciting and innovative
products ever developed. Your phone can help you to
stay in touch with your office, your home, emergency
services and others.
industry reviewed the available body of research to
develop the ANSI Standard (C95.1).
The design of your phone complies with the FCC guide-
lines (and those standards).
* American National Standards Institute: National Coun-
cil on Radiation Protection and Measurements; Interna-
tional Commission on Non-Ionizing Radiation Protection.
Safety
Antenna Care
Exposure to Radio Frequency Signals
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the phone and may violate
FCC regulations.
Your wireless handheld portable telephone is a low
power radio transmitter and receiver. When it is ON, it
receives and also sends out radio frequency (RF) signals.
In August, 1996, the Federal Communications Com-
mission (FCC) adopted RF exposure guidelines with
safety levels for handheld wireless phones. Those guide-
lines are consistent with the safety standards previously
set by both US and international standards bodies:
Phone Operation
NORMAL POSITION: Hold the phone as you would
any other telephone with the antenna pointed up and
over your shoulder.
TIPS ON EFFICIENT OPERATION: For your phone
to operate most efficiently:
•
•
•
ANSI C95.1 (1992)*
NCRP Report 86 (1986)*
ICNIRP (1996)*
•
•
Extend your antenna fully (where applicable).
Do not touch the antenna unnecessarily when the
phone is in use. Contact with the antenna affects
call quality and may cause the phone to operate at a
higher power level than otherwise needed.
Those standards were based on comprehensive and peri-
odic evaluations of the relevant scientific literature. For
example, over 120 scientists, engineers, and physicians
from universities, government health agencies, and
Guidelines for Safe and Efficient Use
3
•
Call roadside assistance or a special wireless non-
emergency assistance number when necessary.
Driving
Check the laws and regulations on the use of wireless
telephones in the areas where you drive. Always obey
them. Also, if using your phone while driving, please:
Electronic Devices
Most modern electronic equipment is shielded from RF
signals. However, certain electronic equipment may not
be shielded against RF signals from your wireless phone.
•
Give full attention to driving - driving safely is your
first responsibility.
•
•
Use handsfree operation, if available.
Pull off the road and park before making or answer-
ing a call if driving conditions so require.
Pacemakers
The Health Industry Manufacturers Association recom-
mends that a minimum separation of six (6”) inches be
maintained between a handheld wireless phone and a
pacemaker to avoid potential interference with the pace-
maker. These recommendations are consistent with the
independent research by and recommendations of Wire-
less Technology Research.
In addition, Ericsson suggests the following safe driving
tips if you are using your phone while driving:
•
•
•
Get to know your wireless phone and its features
such as speed dial and redial.
Position your wireless phone
within easy reach.
Persons with pacemakers:
Suspend conversations during
hazardous driving conditions or
situations.
•
Should ALWAYS keep the phone more than six
inches from their pacemaker when the phone is
turned ON.
•
•
Do not take notes or look up
phone numbers while driving.
•
•
Should not carry the phone in a breast pocket.
Should use the ear opposite the pacemaker to mini-
mize the potential for interference.
Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling
into traffic.
•
If you have any reason to suspect that interference is
taking place, turn your phone OFF immediately.
•
Do not engage in stressful or emotional conversa-
tions that may be distracting.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
•
•
Use your wireless phone to call for help.
Use you wireless phone to help others in emergen-
cies.
4
Guidelines for Safe and Efficient Use
want to consult your service provider (or call the cus-
tomer service line to discuss alternatives).
Blasting Areas
To avoid interfering with blasting operations, turn your
phone OFF when in a “blasting area” or in areas posted:
“Turn off two-way radio.” Obey all signs and instruc-
tions.
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if it is ade-
quately shielded from external RF energy. Your physician
may be able to assist you in obtaining this information.
Potentially Explosive Atmospheres
Turn your phone OFF when in any area with a poten-
tially explosive atmosphere and obey all signs and
instructions. Sparks in such areas could cause an explo-
sion or fire resulting in bodily injury or even death.
Turn your phone OFF in health care facilities when any
regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may be using equip-
ment that could be sensitive to external RF energy.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include fueling
areas such as gasoline stations; below deck on boats; fuel
or chemical transfer or storage facilities; vehicles using
liquefied petroleum gas (such as propane or butane);
areas where the air contains chemicals or particles, such
as grain, dust, or metal powders; and any other area
where you would normally be advised to turn off your
vehicle engine.
Vehicles
RF signals may affect improperly installed or inade-
quately shielded electronic systems in motor vehicles.
Check with the manufacturer or its representative
regarding your vehicle. You should also consult the man-
ufacturer of any equipment that has been added to your
vehicle.
Posted Facilities
Turn your phone OFF in any facility where posted
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place
objects, including both installed or portable wireless
equipment, in the area over the air bag or in the air bag
deployment area. If in-vehicle wireless equipment is
improperly installed and the air bag inflates, serious
bodily injury could result.
notices so require.
Aircraft
FCC regulations prohibit using your phone while in the
air. Switch OFF your phone before boarding an aircraft.
Guidelines for Safe and Efficient Use
5
Product Care and Operation
Ericsson suggests you read an observe the following for
safe care and operation of your phone:
•
Do not allow children to play with your phone.
They could hurt themselves or others, or could acci-
dentally damage the phone. Your phone may con-
tain small parts that could be detached and create a
choking hazard.
•
Do not expose your mobile phone to moisture or
6
Guidelines for Safe and Efficient Use
cling of rechargeable batteries. Many areas require the
recycling of rechargeable batteries. In the U.S., call 1-
Guidelines for Safe and Efficient Use
7
Getting Started
Connecting and Removing Your Battery
Charging Your Battery
Place the battery over the back of
the phone. The label on the bat-
tery should face down. Insert the
top portion of the battery into the
phone. The tab on the bottom of
the battery should be pointing
toward the bottom of the phone.
Your Charger
Your phone was packaged with
either a rapid or travel charger. It is
important that you fully charge
your battery before you use your
phone. Both chargers supply
power to charge your battery while
the battery is attached to your
phone. If your phone is On, it can
receive calls while using either
charger.
Press down until you hear a click.
The battery is now connected.
Note! Never attach the charger to a
phone that does not have a battery
installed.
Remove the battery by pushing in
on the tab of the battery with your
thumb.
If you have a rapid charger, plug the charger into a
standard wall electrical outlet. If you have a travel
charger, connect the appropriate AC power cord and
phone charging cord to the travel charger.
Then, lift the battery up and out of
the battery cavity.
Hold the phone with the display and keypad facing
up.
Hold the small plug on the charger cord so the light-
ning bolt symbol ( ) is up.
8
Getting Started
Align the small plug on the charger cord with the con-
nector on the bottom of your phone. The connector
on the phone is above the lightning bolt symbol.
Charge-Only Mode
If your phone is off, attaching the charger will cause the
phone to activate in charge-only mode. When this mode
is activated the message Char gi ng Onl y appears in
the display. Your phone is now fast (rapid) charging the
battery. When your battery is fully charged, Bat t er y
Char ged appears in the phone’s display.
Press the plug into the connector until the plug
“snaps” into place. The battery icon is alternated with
the
icon.
Note! Do not twist while inserting or removing the small plug
Note! You cannot make or receive calls when your phone is in
on the charger cord!
charge-only mode.
Continue charging the phone until the battery is fully
charged.
Slow (Trickle) Charging a Deeply
Discharged Battery
The battery may become deeply discharged (for exam-
ple, when the battery is stored for a long period). As a
result, the phone may not activate charge-only mode
when the charger is connected.
Note! The battery is being charged when the battery icon is
alternating with the
charged when the
icon. The battery is fully
icon is constant.
To disconnect the charger, lift the plug connected to
the phone upwards (1) and pull it out (2).
Attach the charger to the phone for several hours to
slowly charge (trickle charge) the battery.
After trickle charging the battery for several hours the
phone should activate the charge-only mode automat-
ically.
Continue charging the phone until the battery is fully
charged.
Note! If the phone is in charge-only mode, Bat t er y
Char ged appears in the display when the battery is
fully charged.
Getting Started
9
Learning About Your Mobile Phone
Your Ericsson mobile phone is dual-band, tri mode for
TDMA systems. It operates in three modes - two digital
The following is a list of the terms used in this user’s
guide to describe your Ericsson mobile phone:
(
) modes (800 and 1900 MHz frequency bands) and
one analog ( ) (800 MHz range) mode.
1 Antenna
1
2 Upper Side Key
3 Lower Side Key
4 Earpiece
Highlights of Your Mobile Phone
2
3
4
5 Display
•
25 Ring types (including musical melody ring
options)
6
7
YES key
•
•
Caller number ID (last 20 numbers)
NO key
Embedded phone number call-back for text mes-
sages
8 Clear (CLR) key
9 Up Arrow ( )
10 Menu Key
5
•
•
•
•
•
•
•
•
•
Storage for 200 numbers
Speed dial for 99 numbers including voice mail
Super dial for 9 numbers including voice mail
Dialing for 2 different calling cards
Quick access to the last 40 numbers dialed
Receives text messages with 2KB of storage
Quick access to voice mail service
Call duration reminder
6
7
11 Down Arrow ( )
9
MENU
CLR
8
10
11
12 Quick Access to
Voice Mail
12
13
13 Battery
14
14 Keypad
15 Microphone
16 Charging/Hands-
free Connectors
Digital voice encryption
15
16
10
Learning About Your Mobile Phone
Key Functions
Press to move through menus and menu setting selections
when your phone is in menu mode, or to scroll through
stored numbers when you are recalling numbers from your
phonebook.
Press to answer a call.
Press to access last dialed number from the Standby screen.
Press to send a call after entering a phone number.
Press to store menu settings.
Press to scroll through messages one line at a time when view-
ing text messages.
Press and hold to scroll through a message, one screen at a
time, when viewing text messages.
Press (from the Missed Calls screen) for the incoming log.
Press and hold from the Standby screen for zero-digit dialing.
Press to move the cursor to the left or to the right while in
number-edit mode.
Press and hold after entering a phone number to make a call-
ing card call.
Press either key to temporarily mute the ring tone when
receiving a call.
Press to bypass preset stops in stored number sequences.
Press and hold to turn your phone On or Off.
Press to end a call.
Press to change the earpiece volume during a call.
Press to illuminate the backlight.
Press to return to the Standby screen.
Press to exit a menu.
CLR
Press to erase the last digit entered on the display.
Press and hold to delete all digits or letters you entered.
Press and hold to delete numbers in the Phone List.
Press during an incoming call to mute the ringer.
Press to clear the current display text.
Press to go to the main menu.
MENU
Press and hold during a call to mute the microphone. After
the microphone is muted, press and hold to enable the
microphone.
Press from the main menu to tab right through the menus.
Press and hold for a Pause ( ) character in a dial string.
Press to toggle between upper and lowecase in text entry
mode.
Press to delete a selected text message.
Press keys 1-9 for digit entry.
Press and hold for Stop ( ) character in a dial string.
Press and hold keys 1-9 for Super Dial.
During a call, press to send numbers as tones.
Press and hold for quick access to voice mail.
Learning About Your Mobile Phone
11
Phone Display Icons
Display Messages
1
4
2
3
Voice Mail Waiting Icon
The following are common display messages on your
mobile phone:
indicates the number of
voice mail messages that
have not been read.
Your phone is receiving a call.
New Text Mail Icon
indicates the number of
text messages that have
not been read.
6
8
7
5
Your phone is dialing the
number shown in the display.
Ringer Off ( )/Silent Mode (
) Icon indicates
that your phone will not make any keypad or ringing
sounds.
You have an active call.
Keypad Lock Icon indicates that pressing the keys on
the keypad has no effect. This eliminates the possibil-
ity of accidentally pressing keys.
The battery is reaching its low-
est operational power level.
Battery Icon shows the relative strength of your bat-
tery. A full icon indicates a fully-charged battery. If the
phone is connected to external power and the battery
is charging, the display will alternate between current
battery capacity level and the external power.
Your system has no channels
available. Try again later.
Standby Screen indicates that the phone is in standby
mode and is ready for use.
The phone is searching for the
optimal wireless system.
Analog/Digital Channel Indicator shows that the
phone is currently operating in analog ( ) or digital
(
) mode.
Signal Strength Icon shows the relative signal strength
from the wireless system. More bars indicate a stron-
ger signal.
12
Learning About Your Mobile Phone
The number of calls you have
not answered.
The PHONEBOOK Menu
tab that is accessed by pressing
MENU once from the Standby
screen. Press YES to select.
The microphone is muted.
The MESSAGES Menu tab
that is accessed by pressing
MENU twice from the Standby
screen. Press YES to select.
The keypad is locked to pre-
vent inadvertent key presses.
The CALL INFO Menu tab
that is accessed by pressing
MENU three times from the
Standby screen. Press YES to
select.
The phone is turned off and is
in charge-only mode. You are
not able make or receive calls.
The SETTINGS Menu tab
that is accessed by pressing
MENU four times from the
Standby screen. Press YES to
select.
When the plug icon is not
alternating with the battery
icon, your phone is connected
to an external power source
and is fully charged.
The phone ringer is muted.
Allows the user to input a
phone number, such as when
saving a phone number to a
phonebook entry.
Learning About Your Mobile Phone
13
s
Basic Operations
Summary of Basic Operations
Turning Your Phone On and Off
Turn your phone Off by pressing and holding NO until
Turn your phone On or Off
Answer a call
Press and hold NO
your phone sounds a beep and turns off. Turn your
phone On by pressing and holding NO until your phone
sounds a beep and turns on.
YES
NO
End a call
Increase/decrease ear volume during a call
Access the main menu
Either side key
MENU
NO
Making Calls
Go back one level in menu mode
Exit menu mode from any menu level
Scroll through menus or menu settings
Erase the last digit or letter entered
Erase all digits or letters entered
Call the number shown in the display
Recall a last dialed number
CLR
Enter the phone number you want to call by pressing
the numeric keys. The number is shown in the dis-
play.
or
CLR
Press and hold CLR
Note! You can press CLR to erase one or more digits in the dis-
YES
play, or press and hold CLR to erase all digits.
YES, or
Press YES. Cal l i ng is shown in the display while
your phone accesses the wireless network.
YES
Save the text message you are reading
Select a highlighted menu setting
Turn Keypad Lock On or Off
Turn Phone Silent On or Off
Call number in display using calling card
Mute your voice during a call
Mute the ringer when a call is received
Check voice mail
YES
When the call is connected, Ongoi ng Cal l will dis-
play on your screen. The phone number that you
dialed will be replaced by the call timer.
MENU then *
MENU then #
Press and hold YES
Press and hold CLR
NO or either side key
Press and hold 1
When you finish your conversation, press NO.
14
Basic Operations
Redialing the Last Number You Called
Making Credit Card Calls
Your telephone temporarily stores numbers you have
You can make calling card calls from your phone by
previously called. To view these numbers, press YES
from the Standby screen. The last number you called is
shown in the display. Press or to scroll through the
other numbers. You can place a call to a number shown
in the display by pressing YES. You can delete a number
from the Outgoing Calls by pressing and holding CLR
while the number is shown in the display.
doing the following:
Press MENU from the Standby screen to access the main
menu.
Press 4 to display the SETTINGS Menu.
Press 7 to display the Calling Cards submenu.
Select the Card Setup that you would like to use and
press YES.
Super Dial
Press YES to select the Access Number.
Enter the calling card number.
Press YES to store the number.
The Super Dial feature, when enabled through the SET-
TINGS menu, lets you use one-touch dialing for phone
numbers stored in phonebook locations 1 through 9. To
use Super Dial, press and hold the numeric key (1 - 9)
that corresponds to the phonebook location containing
the number you want to call. For example, if you want
to call the number stored in phonebook location 7, press
and hold 7.
Press NO to return to the previous screen or press CLR
to return to the Standby screen.
Note! Follow your calling card provier’s flow order for entering
your access number and verification number.
Note! The first Super Dial position is reserved for quick access
Stop and Pause Dialing
to voice mail.
Stop and pause dialing lets you enter groups of numbers
with stops and pauses between each group of numbers.
This feature is useful when you need to dial a phone
number and then another number, such as an access
number for an answering machine or voice mail system.
Speed Dial
The Speed Dial feature, when enabled through the SET-
TINGS menu, lets you quickly dial a phone number
stored in your phonebook. To use Speed Dial, enter the
number of the phonebook location containing the num-
ber you want to call, then press YES. For example, if you
want to call the number stored in phonebook location
12, press 1, then press 2 and press YES. Locations 2-99
can be used to store Speed Dial phonebook locations.
A stop causes the phone to stop transmitting numbers
until you press YES. You can enter a stop in a series of
digits by pressing and holding # until
is shown in the
display. A pause temporarily suspends transmitting
numbers for approximately two seconds before sending
Basic Operations
15
the next series. You can enter a pause in a series of digits
Press 1 to select Add Entry.
by pressing and holding * until
play.
is shown in the dis-
Press or to scroll to the name and number line.
See the next section to learn how to enter names in
your phonebook.
For example, if your office has a voice mail system that
requires you to dial a phone number, followed by your
extension, followed by an access code, you could enter
Press YES to store the new entry.
Entering Letters and Symbols
the following: 555-1111 2222 33333.
Press the appropriate key, 0-9, #, or * repeatedly until
the desired letter, character, or digit appears in the dis-
play. For example, to enter an A, press the numeric key 2
once. To enter a B, press the numeric key 2 twice.
When you press YES, your phone dials the number and
then stops transmitting tones. When your voice mail
system asks for your extension you would press YES to
transmit your extension. The access code is sent after the
pause. If the timing in your voice mail system does not
allow for pauses, you can enter a stop instead of the
pause, or use multiple pauses.
Press this... For...
1
2
3
4
5
6
7
8
9
0
*
Space 1
A B C 2 À Á Â Ã Ç
D E F 3 È É Ê Ë
G H I 4 Í Î Ï
J K L 5
You can also store groups of numbers which can include
stops and pauses in a phonebook location. You can then
dial the numbers by entering the phonebook location
and pressing YES.
M N O 6 Ñ Ó Ô Õ
P Q R S 7
T U V 8 Ù Ú Û Ü
W X Y Z 9
Using Your Phonebook
0
Creating Phonebook Entries
Toggles between upper and lowercase
letters.
You can add entries to your phonebook by doing the fol-
lowing:
#
"space", . ? - ( ) ‘ “ ! ; : # @ & $ % + - * /
| = < >
Press MENU from to access the main menu.
Press 1 to display the PHONEBOOK menu
Note! Character sets vary according to lan-
guage selection.
16
Basic Operations
from the Missed Calls Indicator screen to access the
Incoming Call Log.
Answering Calls
When your phone receives a call,
the ring tone sounds, I ncomi ng
Cal l appears in the display, and
the display and keypad backlight
are illuminated. (you can disable
Temporarily Muting the Ring Tone
To temporarily mute the ring tone without answering
the call, press NO or the upper or lower side volume key.
I ncomi ng Cal l is still shown in the display, and you
can still answer the call by pressing YES.
the ring tone through the SETTINGS menu). If you
have Caller Number Identification (Caller ID) service
from your service provider, the caller's phone number is
shown in the display.
Caller Number Identification
If your service provider has Caller Number Identifica-
tion (Caller ID) service, your phone shows the phone
number of an incoming call in the display. If the number
is one that you have stored in your phonebook with a
name, the name is shown when your phone rings. If the
Caller ID information is not available, the message NO
I D is shown in the display. The word Anonymous may
be shown if the Caller ID is restricted by the service pro-
vider or by the caller.
Answer the phone by pressing YES. I ncomi ng Cal l is
replaced by the call timer display. End the call by press-
ing NO.
Call Waiting
If you have call waiting service from your service pro-
vider, press YES to answer a call when you receive the call
waiting signal. You can switch between the two calls by
pressing YES. Do not press NO until you are ready to end
both calls.
Muting the Microphone During a Call
To mute the microphone during a call, press and hold
the CLR key. Mi c Mut ed appears in the display when
the call is muted. Repeat this procedure to return to your
call.
Unanswered Calls
Your phone's display shows the number of calls you have
received but did not answer. You can clear the number of
missed calls from the display by pressing any key except
YES. If Caller Number Identification is available from
your carrier, unanswered calls will be stored in the
Incoming Calls of the CALL INFO menu. Press YES
Increasing or Decreasing Ear Volume During a Call
Use the following instructions to increase or decrease ear
volume during a call:
Basic Operations
17
• To increase the ear volume
during a call, press the upper
key on the side of your
phone.
Press 9 to display the Language submenu.
Press the or repeatedly until the appropriate lan-
guage option is highlighted. The language options are
English, French, Spanish, Portuguese, Hebrew, or
Russian (languages may vary by region).
• To decrease the ear volume
during a call, press the lower
key on the side of your
phone.
Press YES to select the Language.
Press NO to return to the previous screen or press CLR
to return to the Standby screen.
Note! If you accidentally select the wrong language, press
MENU 4 9 and scroll to the correct language.
Low Battery Power Alert
The low battery alert sounds when your battery is reach-
ing its lowest operational power level. The words Low
Bat t er y! will appear in the display. When this hap-
pens, leave your phone turned on. The phone discharges
the battery and then automatically turns off. Charge the
battery within 24 hours after a complete discharge so
that the battery can charge to full capacity.
Setting the Ring Sound
To select the ring sound for your mobile phone:
Press MENU from the Standby screen to access the main
menu.
Press 4 to display the SETTINGS Menu.
Press 1 to display the Sounds submenu.
Press 3 to display the Ring Sound submenu.
Setting the Display Language
Press the or repeatedly until the appropriate ring
sound is highlighted. You will hear two ring cycles of
the currently selected ring sound as you scroll through
the list of ring sounds.
You can set the language used to display the menus for
your mobile phone. To change the display language:
Press MENU from the Standby screen to access the main
menu.
Press YES to select the Ring Sound.
Press 4 to display the SETTINGS menu.
Press NO to return to the previous screen or press CLR
to return to the Standby screen.
18
Basic Operations
Note! Auto Key Lock allows emergency (911) number access.
Setting the Ring Volume
Unlock Auto Key Lock by pressing MENU and then *.
To select the ring volume for your mobile phone:
If police, fire, or medical help is needed, dial 911 or your
emergency number and press YES. Tell the dispatcher
that you are calling from a wireless phone. Wireless 911
calls do not automatically provide emergency personnel
with your name, location, or phone number. The dis-
patcher will want to know the following:
Press MENU from the Standby screen to access the main
menu.
Press 4 to display the SETTINGS Menu.
Press 1 to display the Sounds submenu.
Press 1 to display the Ring Volume submenu.
Your name and wireless phone number.
The nature of the emergency.
Press the or repeatedly until the appropriate ring
volume is highlighted. You will hear two ring cycles of
the currently selected ring volume as you scroll
through each ring volume selection.
If police, fire, or medical assistance is needed.
The exact location of the emergency, including cross
streets, mileposts, or landmarks.
When the appropriate ring volume is highlighted,
How many people are involved, their condition, and if
help is being administered.
press YES.
Press NO to return to the previous screen or press CLR
to return to the Standby screen.
System Dependent Network Features
Emergency Calls
Network Search
Your phone was programmed with an emergency num-
ber (911) when it was manufactured. The programmed
emergency number can be dialed and called at any time,
if there is any emergency system available. A representa-
tive from your service provider or the retail outlet where
you purchased your phone should be able to change the
emergency number in your phone if a 911 system is not
available in your service area.
Your phone should be configured by your service pro-
vider for optimal network selection during roaming. If
you want and your service provider allows, you can over-
ride the preconfigured selection by doing the following:
Press MENU from the Standby screen to access the main
menu.
Press 4 to display the SETTINGS Menu.
Basic Operations
19
Press 7 to display the System Select submenu.
Press MENU from the Standby screen to access the main
menu.
Press 1 to select the Network Search option.
Press 4 to display the SETTINGS Menu.
Press or repeatedly until the appropriate system
selection is highlighted.
Press 6 to display the Phone Number submenu.
When the appropriate system selection is highlighted,
press YES.
Press the or repeatedly until the appropriate num-
ber assignment module is highlighted.
Press NO to return to the previous screen or press CLR
When the appropriate number assignment module is
to return to the Standby screen.
highlighted, press YES.
Press NO to return to the previous screen or press CLR
Subscription Assignment
to return to the Standby screen.
This feature gives you the ability to add a second sub-
scription from another service provider to your phone.
This offers you the option of adding a second telephone
number to your mobile phone so that it will be more
useful in areas to which you frequently roam.
International Calls
If allowed by your service provider, you can place inter-
national calls with your phone just as you would from
any other phone. If you have difficulty completing inter-
national calls, check with your service provider for infor-
mation.
The ability to add a second subscription is an optional
feature that may be allowed by your service provider. If
available, it allows you to add a new phone number for
use in areas that your first subscription can be used. It is
particularly useful where international roaming is not
yet available.
20
Basic Operations
Problem Solving
Problems and Possible Solutions
Displayed Messages and Explanations
The phone does
not turn On.
Recharge or replace the battery.
The signal is too weak to make a call. Try again
when the signal strength is one bar or stronger.
The phone is not
ringing when a
call is received.
Check for Ringer Off ( ) or Silent Mode (
)
icons on the Standby screen.
The battery does
not seem to
charge to full
capacity.
Your battery is fully charged when the power
The battery power is low. When the phone shuts
itself off, replace the battery with a fully charged
one, or use an alternate power source, such as a
travel charger.
indicator shows the power icon (
) continu-
ously. If you still experience problems, condition
your battery by fully discharging and charging it
three times. Or, if your phone came with a desk-
top charger, use the conditioning function on
the desktop charger to condition the battery.
Your text message memory is full. Erase some
stored messages before you can receive more mes-
sages.
Calls are being
dropped.
You are probably in a geographic area with mini-
mal service. Wait until the signal strength indica-
tor in your phone's display shows a high relative
signal strength (more bars) before trying a call.
Make note of geographic locations where calls
are dropped and contact your service provider.
If you need additional information or assistance, or would like to
purchase Original Ericsson Accessories: in North America, call
1-800-ERICSSON (374-2776). In Latin America, call 1-305-755-6789.
All other countries, call 1-919-472-7908.
The signal
strength varies.
This is a common occurrence. Transmitters are
set in geographic areas and coverage is not 100%
all of the time. Signal strength varies as you
travel between cells.
Problem Solving
21
.
A1228d/A1228ds
During Calls
Making and Answering Calls
Decrease ear volume
Increase ear volume
Access main menu
Working with Your Phonebook
Add an entry
Call an entry
Press lower side key
Press upper side key
Press MENU
Turn Phone On/Off Press and hold NO
Answer a Call
End a Call
Call the number
shown in the
display
Press YES
Press NO
Press YES
Press MENU then 1 1
Press MENU then 1 2.
Scroll to entry ( or
). Press YES to dial.
Activate Speed Dial Press MENU then 4 6
Activate Super Dial Press MENU then 4 5
Delete all phonebook Press MENU then 1 3
Entries used
Access the
outgoing call log
Press YES
Press MENU then 1 4
Dial a number
displayed in the
incoming/outgoing
call log
Erase the last digit
or letter entered
Erase all digits or
letters entered
While in Menu Mode
Go back one level
Return to Standby
Press YES
Working with Messages
List text messages
Memory used
Erase text messages
Work with voice mail Press MENU then 2 4
Quick access to voice Press and hold 1
mail
Working with Call Info
Outgoing call list
Incoming call list
Time since reset
Call totals
Press MENU then 2 1
Press MENU then 2 2
Press MENU then 2 3
Press CLR
Press and hold CLR
Press NO
Press CLR
Press MENU
Press MENU then 3 1
Press MENU then 3 2
Press MENU then 3 3
Press MENU then 3 4
Press MENU then 3 5
Scroll through
menu
Select a highlighted
menu setting
Press YES
Erase call lists
AE/LZT 123 4798 R2
Working With Settings
Sounds
Auto Key Lock
Super Dial
Speed Dial
Calling Cards
Frequently Dialed Numbers
Press MENU then 4 1
Press MENU then 4 2
Press MENU then 4 3
Press MENU then 4 4
Press MENU then 4 5
Phone Number menu Press MENU then 4 6
System Select menu Press MENU then 4 7
Backlight
Language
Press MENU then 4 8
Press MENU then 4 9
Making Calling Card Calls
Enter the number you want to call. Press and
hold YES to use your calling card. Follow your
calling card provider’s flow order for entering
your access number and verification number.
Key Shortcuts
PHONEBOOK menu MENU then 1
MESSAGES menu
CALL INFO menu
SETTINGS menu
MENU then 2
MENU then 3
MENU then 4
Making Emergency Calls
Visit us on the web at:
You will be able to dial 911 (or your
emergency number) at any time, regardless
of any call restrictions that you have set.
.
The A1228d/A1228ds Menu
You can quickly access sev-
eral commonly used menus by
simply pressing the MENU key.
The menus are organized in a
circle. Quickly access menus
and settings using the num-
bers that appear next to each
menu and setting. For exam-
ple, access the Auto Key Lock
submenu by pressing MENU
and then entering 4 2.
CLR
1. Sounds
2. Auto Key Lock
3. Super Dial
4. Speed Dial
5. Calling Cards
6. Phone Number
7. System Select
8. Backlight
MENU
9. Language
1. Outgoing Calls
2. Incoming Calls
3. Resettable Time
4. Call Totals
5. Clear Call Lists
1. Add Entry
2. List & Call
3. Delete All
4. Entries Used
1. Inbox
2. Memory Used
3. Delete All
4. Voice Mail
|
