Emerson CKD2330 User Manual

AM/FM STEREO CLOCK RADIO  
with COMPACT DISC PLAYER  
POWER PANEL LOADING SYSTEM  
and REMOTE CONTROL  
(Model CKD2330 only)  
OWNER’S MANUAL  
CKD2328  
CKD2330  
(Without Remote Control)  
(With Remote Control)  
CKD2328_2330_B0901103.p65  
36  
11/9/2003, 14:17  
Thank you… … … … … …  
for purchasing this Emerson stereo clock radio with CD player and Power Panel  
CD loading system. The motorized front panel rotates 90 degrees at the touch of a  
button to make loading and unloading your CDs simple and easy. The Power Panel  
loading system also means that this radio takes up less space on the bedside table  
than other radios with drawer type CD loading systems.  
In addition to the excellent sound from both the radio and the CD player this unit  
also features a digital radio frequency display to make tuning your favorite stations  
easier. There’s an automatic display dimmer that adjusts the brightness of the  
clock and radio display to match the room lighting conditions. And there’s a two-  
way snooze control to make it easier to grab those few extra minutes of sleep. You  
can press the snooze button as usual or, if that’s too much of a task while you’re  
half-asleep, you can just wave your hand in front of the radio to activate the snooze  
function.  
Of course there’s a batteryback up system to maintain your clock and alarm settings  
in the event of a power interruption. And on model CKD2330 we’ve even included  
a credit card size, 10-button remote control so you can switch the unit On and Off,  
operate the CD functions, and adjust the volume from across the room.  
This system was designed to give you many years of enjoyment with an absolute  
minimum of care and maintenance. Please read this Owners Manual carefully and  
completely to ensure that you get the maximum benefit from all the outstanding  
features we have included in this product. If you encounter any problem with the  
set up or operation of this model please do not return it to the retail store. Please  
call the Emerson Customer Service Hotline toll free at 1-800-898-9020. One of  
our service technicians will try to diagnose the problem for you.  
Once again thanks for choosing this Emerson audio product.  
For future reference, record the serial number in the space provided.  
Model No: CKD2328/CKD2330  
Serial No:  
2
CKD2328_2330_B091103.p65  
2
11/9/2003, 14:51  
IMPORTANT NOTES  
• Avoid installing this unit in places  
• Operate controls and switches as  
described in the manual.  
exposed to direct sunlight or close to  
heat radiating appliances such as  
electric heaters, on top of other stereo  
equipment that radiates too much heat,  
places lacking ventilation or dusty areas,  
places subject to constant vibration and/  
or humid or moist areas.  
• Before turning ‘On’ the power, make  
certain that power cord is properly  
installed.  
• Store your CDs in a cool area to avoid  
damage from heat.  
• When moving the set, be sure to first  
disconnect the power cord.  
• Do not attempt to clean this unit with  
chemical solvents as this might damage  
the finish. Use a clean dry cloth.  
CLASS 1 LASER PRODUCT  
CAUTION  
CLASS 1 LASER PRODUCT  
APPAREIL Á LASER DE CLASSE 1  
PRODUCTO LASER DE CLASE 1  
INVISIBLE LASER RADIATION  
WHEN OPENAND INTERLOCKS  
DEFEATED.  
AVOID EXPOSURE TO BEAM  
This product contains a low power Laser Device.  
FCC INFORMATION  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the receiver  
is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following  
two conditions:  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference received, including interference that  
may cause undesired operation.  
3
CKD2328_2330_B091103.p65  
3
11/9/2003, 14:51  
PREPARATION FOR USE  
UNPACKING AND SETUP  
• Carefully remove the main unit and the accessories from the display  
carton. Remove all the packing material from the unit and verify that  
you have the following items: Main unit, external AM antenna, and  
remote control (for model CKD2330 only).  
• Carefully remove any small strips of tape that may have been used to  
prevent the Power Panel from moving in transit.  
• Unwind the AC power cord and extend it to its full length.  
• Unwind the lead wire FM antenna and extend it to its full length.  
• This unit was shipped with a dummy CD transit card in the CD player.  
This dummy CD prevents the laser pick up from moving during  
shipment. This card must be removed before you can insert your own  
CDs. However in order to remove the card the unit must be connected  
to the AC outlet and the Power Panel must be opened electronically.  
Please refer to the instructions on page 18 of this manual.  
TO AVOID DAMAGING YOUR UNIT DO NOT ATTEMPT TO  
MANUALLY OPEN THE POWER PANEL.  
• Place the unit on a flat, level surface such as a table, desk, counter,  
shelf, etc, convenient to a 120V 60 Hz AC outlet, out of direct sunlight,  
and away from sources of excess heat, dust, moisture, or strong magnetic  
fields.  
4
CKD2328_2330_B091103.p65  
4
11/9/2003, 14:51  
External AM Antenna  
This unit utilizes an external AM loop antenna instead of a built in ferrite bar antenna.  
1.) Insert the small white plug from the AM loop antenna into the AM antenna jack  
on the back of the radio. The plug can only be inserted one way.  
2.) Attach the AM loop antenna to the antenna bracket on the back of the radio as  
shown.  
5
CKD2328_2330_B091103.p65  
5
11/9/2003, 14:51  
3.) Adjust the angle of the loop antenna until you find the position that provides the  
best AM reception.  
Note: If you find that AM reception is still unsatisfactory you can remove  
the loop antenna from the antenna mounting bracket and attach it to the  
wall with a thumbtack or small nail through the “keyhole” opening on the  
antenna frame.  
Hanging Screw  
Key Hole  
6
CKD2328_2330_B091103.p65  
6
11/9/2003, 14:51  
Battery Back Up System  
This model includes a battery back up circuit that will maintain the clock and alarm  
settings in the event of a temporary power interruption. The battery back up system  
requires two “AA” batteries, not included. The battery compartment is located on  
the bottom of the cabinet.  
1.) Turn the radio upside down. Slide the battery door in the direction of the arrow  
and remove the door.  
2.) Insert two fresh “AA” alkaline batteries in the compartment. Be sure to observe  
the polarity markings engraved in the compartment. If the batteries are inserted  
incorrectly the back up system will not work.  
3.) Replace the battery door and turn the radio right side up.  
If the power is interrupted the display will go off and the radio will not work. However  
the batteries will maintain the clock and alarm settings in memory. When the power  
is restored the display will come on again and the clock and alarm settings will be  
correct.  
The life of the batteries will depend on the frequency and length of the power  
interruptions that you experience. For best results we suggest you install fresh  
batteries every 9 to 12 months. Always change both batteries together with a well-  
known brand of alkaline batteries. Do not mix old and new batteries, or different  
types of batteries such as alkaline and carbon-zinc batteries together.  
7
CKD2328_2330_B091103.p65  
7
11/9/2003, 14:51  
Remote Control (Model CKD2330 Only)  
Model CKD2330 includes a credit card size 10-button remote control that allows  
you to operate the CD player, control the volume, and switch the system ‘On’ and  
‘Off’ from across the room. The remote control operates on one, button-style lithium  
battery (Type CR2032 or equivalent), included. We have placed a clear plastic  
spacer between the battery and the battery contact plate so that the battery will  
remain fresh until you are ready to use the remote. Pull on the end of the spacer  
tab to remove the spacer from the remote and activate the battery.  
Spacer  
To use the remote control point the remote at the remote sensor on the front panel  
of the radio and press the appropriate buttons on the remote. The effective operating  
range of the remote is approximately 15 feet at an angle of no more than 15  
degrees to the left or right of ‘dead center’.  
When the remote control no longer works or the operation becomes intermittent it  
is time to change the battery. Press downward on the locking tab and slide the  
battery holder out of the remote as shown.  
Remove the exhausted CR2032  
battery from the holder, insert a fresh  
battery into the holder with the “+” side  
facing up, and slide the holder back  
into the remote.  
8
CKD2328_2330_B091103.p65  
8
11/9/2003, 14:51  
IMPORTANT BATTERY PRECAUTIONS:  
• Do not leave the exhausted battery lying around where a child or pet might  
play with or swallow it.  
• If the battery is swallowed contact a physician immediately.  
• Do not attempt to open the battery and do not dispose of the battery in a  
fire.  
PROTECT YOUR FURNITURE !!  
This model is equipped with non-skid rubber 'feet' to prevent the product from  
moving when you operate the controls. These 'feet' are made from non-migrating  
rubber material specially formulated to avoid leaving any marks or stains on your  
furniture. However certain types of oil based furniture polishes, wood preservatives,  
or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a  
rubber residue on the furniture. To prevent any damage to your furniture we strongly  
recommend that you purchase small self-adhesive felt pads, available at hardware  
stores and home improvement centers everywhere, and apply these pads to the  
bottom of the rubber 'feet' before you place the product on fine wooden furniture.  
9
CKD2328_2330_B091103.p65  
9
11/9/2003, 14:51  
POWER SOURCE  
This radio is designed to operate on 120V 60Hz AC only. Attempting to operate  
this radio on any other power source could cause damage to the unit and such  
damage is not covered by your warranty.  
Make sure the radio is connected to an AC outlet that is always “live”. Do not  
connect the radio to an outlet that is controlled by a wall switch.  
NOTE: This unit has a polarized AC plug with one wide blade and one narrow  
blade. This plug will only fit into a matching polarized AC outlet. This is a safety  
feature to reduce the possibility of electric shock. If this plug will not fit in your AC  
outlet, you probably have an outdated non-polarized outlet. You should have your  
outdated outlet changed by a qualified, licensed electrician. Do not file the wide  
blade on the plug, or use an adapter to make the plug fit into your outlet. This  
defeats the safety feature and could expose you to electric shock.  
AC Outlet  
AC Plug  
10  
CKD2328_2330_B091103.p65  
10  
11/9/2003, 14:51  
LOCATION OF CONTROLS AND INDICATORS  
3
5
7
FRONT PANEL  
4
6
8
9
10  
12  
14  
2
1
11  
13  
15  
16  
17  
18  
21 19  
23  
22 20  
BACK PANEL  
27  
28 29  
30  
26  
25  
31  
32  
24  
33  
RIGHT SIDE PANEL  
9
36  
35  
34  
11  
CKD2328_2330_B091103.p65  
11  
11/9/2003, 14:51  
1.) CD Power Panel (Flashing Blue Light When Opening).  
2.) Mute Indicator (Red).  
3.) ALARM SET Button.  
4.) Snooze Sensor.  
5.) CLOCK SET Button.  
6.) Display AUTO DIMMER.  
7.) PROGRAM Button.  
8.) LCD Display.  
9.) TUNING Control.  
10.) Remote Sensor.  
11.) Reverse SKIP/Search  
Button.  
Button.  
12.) PLAY/PAUSE  
Button.  
13.) Forward SKIP/Search  
14.) STOP Button.  
15.) REPEAT Button.  
16.) OPEN/CLOSE  
Button.  
17.) Standby LED Indicator.  
18.) STANDBY/ON  
19.) SLEEP Button.  
20.) MINUTE Button.  
Button.  
21.) VOL (Volume) UP/+ Button.  
22.) VOL (Volume) DOWN/– Button.  
23.) HOUR Button.  
24.) AM Antenna Plug.  
25.) AM Antenna Socket.  
26.) AM Loop Antenna.  
27.) SNOOZE Button.  
28.) CD/RADIO Selector Switch.  
29.) ALARM ON/OFF Button.  
30.) ALARM MUSIC  
31.) FM Wire Antenna.  
32.) AC Power Cord.  
/BUZZER  
Switch.  
33.) Backup Battery Compartment (Bottom Cabinet)  
34.) Phones Jack.  
35.) AM/FM/FM ST. Selector Switch.  
36.) Right Speaker.  
12  
CKD2328_2330_B091103.p65  
12  
11/9/2003, 14:51  
REMOTE CONTROL (Model CKD2330 Only)  
5
6
7
4
3
8
9
2
1
10  
11  
1.) VOLUME – Button.  
2.) MUTE Button.  
3.) Reverse SKIP/SEARCH  
Button.  
4.) STOP Button.  
5.) STANDBY/ON  
6.) PLAY/PAUSE  
7.) OPEN/CLOSE  
8.) RANDOM Button.  
Button.  
Button.  
Button.  
9.) Forward SKIP/SEARCH  
Button.  
10.) VOLUME + Button.  
11.) Battery Compartment (Back Cabinet)  
13  
CKD2328_2330_B091103.p65  
13  
11/9/2003, 14:51  
OPERATING INSTRUCTIONS  
• Make sure you have installed the back up batteries in the battery  
compartment.  
• Make sure you have installed the AM loop antenna and extended the FM  
lead wire antenna to its full length.  
• Make sure you have removed the remote control battery spacer from the  
remote handset (Model CKD2330 only).  
• Connect the AC power cord plug to a 120V 60Hz AC outlet.  
SETTING THE CLOCK  
When the radio is connected to the AC outlet for the first time the red Standby  
indicator will come on and the main display will light.  
The display will show AM hour  
“12:00”. Do not press the  
STANBY/ON  
button. It is  
easier to set the clock while the  
unit is in the Standby mode  
(Standby indicator is ‘On’).  
1.) Depress and hold the CLOCK SET button and repeatedly press the HOUR  
button to adjust the display to the correct hour, AM or PM.  
2.) Continue to depress the CLOCK SET button and repeatedly press the MINUTE  
button to adjust the display to the correct minute.  
3.) When the display shows the correct time release all the buttons.  
The display will show the correct time whenever the unit is in the Standby mode  
(Standby indicator is ‘On’) or when the CD function is selected. To see the time  
when the Radio function is selected press the CLOCK SET button.  
14  
CKD2328_2330_B091103.p65  
14  
11/9/2003, 14:51  
SETTING THE WAKE-UP TIME  
1.) Depress and hold the ALARM SET button. The display will change from clock  
time to wake-up time and show “7:00 ”. Repeatedly press the HOUR button  
to adjust the display to the correct wake-up hour, AM or PM.  
2.) Continue to depress the ALARM SET button and repeatedly press the MINUTE  
button to adjust the display to the correct wake-up minute.  
3.) When the display shows the desired wake-up time release all the buttons.  
To check the wake-up time just press the ALARM SET button at any time. The  
display will show the wake-up time as long as the ALARM SET button is depressed.  
15  
CKD2328_2330_B091103.p65  
15  
11/9/2003, 14:51  
LISTENING TO THE RADIO  
1.) Slide the CD/RADIO selector switch, located on the top cabinet, to the RADIO  
position.  
2.) Press the STANDBY/ON  
button on the front panel or the remote control  
(model CKD2330 only) to turn the system ‘On’. The Standby indicator goes off  
and an AM or FM radio frequency appears on the display.  
3.) Select the desired band – AM, FM, or FM ST. – by sliding the Band selector,  
located on the right side, to the appropriate position.  
4.) Tune to the desired station by slowly rotating the TUNING control on the right  
side. The digital frequency display will move up or down the band as you  
rotate the tuning control. If you tune to an FM Stereo station the (((ST))) indicator  
will appear in the display.  
Note: This is a manual tuning radio with a digital frequency display. Slowly  
rotate the TUNING control until you find the best reception, even if the  
display does not indicate the exact frequency of the station.  
5.) Press the VOLUME + or buttons on the front panel or the remote control  
(model CKD2330 only) to adjust the volume to the desired level.  
6.) When you are finished listening press the STANDBY/ON  
button on the  
front panel or the remote control (model CKD2330 only) to return the system  
to the Standby (Power ‘Off’) mode. The Standby indicator comes ‘on’ again  
and the display changes from radio frequency to correct time.  
16  
CKD2328_2330_B091103.p65  
16  
11/9/2003, 14:51  
Hints For Better Reception  
FM – Adjust the position and direction of the FM lead wire antenna until you find  
the position and direction that provides the best reception.  
AM Loop Antenna  
FM Wire Antenna  
AM – Adjust the direction of the AM loop antenna that you connected to the back  
of the radio. If this does not provide sufficient improvement try removing the loop  
from the antenna bracket and moving it further away from the radio cabinet (as far  
as the wire will allow). You may also attach the loop to the wall with a thumbtack or  
small nail through the “keyhole” on the antenna frame.  
17  
CKD2328_2330_B091103.p65  
17  
11/9/2003, 14:51  
PLAYING COMPACT DISCS  
NOTE: Although this CD player can read CD-R and CD-RW discs, in addition to  
normal CDs, the playability of CD-R and CD-RW discs may be effected by the type  
of software that was used to create the discs, as well as the quality and condition of  
the blank media you are using. 100% playability cannot be guaranteed. This is not  
an indication of a problem with the player.  
IMPORTANT: THIS MODEL HAS A MOTORIZED ELECTRONIC CD DOOR.  
DO NOT ATTEMPT TO OPEN THE DOOR MANUALLY. THIS COULD CAUSE  
DAMAGE TO THE DOOR OPENING MECHANISM.  
1.) Slide the CD/RADIO selector switch on the top cabinet to the CD position.  
2.) Press the STANDBY/ON  
button on the front panel or on the remote control  
(Model CKD2330 only). The display will show two flashing dashes (“- -“) in the  
track number display.  
After a few seconds the track number display will show “00”, indicating that  
there is no disc in the player.  
3.) Press the OPEN/CLOSE button on the front panel or on the remote control  
(Model CKD2330 only) once.  
IMPORTANT! THERE WILL BE A PAUSE OF APPROXIMATELY TWO  
SECONDS BEFORE THE POWER PANEL OPENS. PLEASE WAIT. DO  
NOT PRESS THE OPEN/CLOSE  
BUTTON AGAIN.  
18  
CKD2328_2330_B091103.p65  
18  
11/9/2003, 14:51  
4.) The Power Panel will rotate 90 degrees to allow you to load your disc in the  
CD player. Before loading your own disc be sure to remove the dummy CD  
transit card from the player and discard it.  
5.) Place your disc on the center spindle with the printed label side facing you.  
Gently press on the disc near the center hole to insure that the disc is properly  
‘seated’ on the spindle.  
6.) Press the OPEN/CLOSE button on the front panel or on the remote control  
(Model CKD2330 only). The Power Panel will return to its closed position. The  
disc will spin for a few seconds while the player reads the TOC (Table of  
Contents) on the disc. Then the disc will stop spinning and the display will  
show the total number of tracks on the disc.  
19  
CKD2328_2330_B091103.p65  
19  
11/9/2003, 14:51  
7.) Press the PLAY/PAUSE  
button on the front panel or on the remote control  
(Model CKD2330 only). Playback begins on track 1 and the PLAY indicator  
appears in the display.  
PLAY  
Adjust the VOLUME controls to the desired level.  
8.) Playback will continue until the last track has played then the disc stops, the  
PLAY indicator disappears, and the display again shows the total number of  
tracks on the disc. To stop playback before the disc ends press the STOP  
button on the front panel or on the remote control (Model CKD2330 Only) at  
any time. The disc stops and the display shows the total tracks on the disc.  
9.) If you are finished listening press the OPEN/CLOSE  
button on the front  
panel or on the remote control (Model CKD2330 Only), wait for the two-second  
delay before the Power Panel opens. When the panel opens, gently remove  
your disc from the player, and then press the OPEN/CLOSE  
button again  
to close the Power Panel.  
10.) To listen to the radio slide the CD/RADIO selector switch back to the Radio  
position, or press the STANDBY/ON  
button to return the system to the  
Standby (Power Off) mode.  
20  
CKD2328_2330_B091103.p65  
20  
11/9/2003, 14:51  
PAUSE Control  
To pause momentarily during CD playback press the PLAY/PAUSE  
button on  
the front panel or on the remote control (Model CKD2330 only) again. The sound  
stops and the PLAY indicator flashes but the disc continues to spin.  
PLAY  
Press the PLAY/PAUSE  
button again to cancel the Pause mode and resume  
normal playback. The sound resumes at the same point on the disc and the PLAY  
indicator stops flashing.  
SKIP/SEARCH Controls (  
/
)
During playback press the SKIP Forward  
or SKIP Reverse  
buttons on the  
front panel or on the remote control (Model CKD2330 Only) repeatedly to skip  
forward or back to higher or lower numbered tracks. Playback will start at the  
beginning of the selected track.  
To search within a track for a specific musical passage depress and hold the SKIP  
Forward  
or SKIP Reverse  
buttons on the front panel or on the remote  
control (Model CKD2330 Only). The player will search rapidly forward or backward  
as long as the buttons are depressed. When you hear the desired passage release  
the buttons and normal playback will resume at that point.  
To start playback from a specific track load your disc as usual and wait until the  
display shows the total number of tracks. Press the SKIP Forward  
or SKIP  
Reverse  
buttons repeatedly until the desired track number appears in the display  
then press the PLAY/PAUSE  
button to begin playback on the desired track.  
21  
CKD2328_2330_B091103.p65  
21  
11/9/2003, 14:51  
SPECIAL PLAYBACK MODES  
REPEAT Playback  
You can program the player to continuously repeat a single track or the entire disc.  
The Repeat mode can be selected while the disc is playing or while the disc is  
stopped.  
Single Track Repeat  
Select the track to be repeated and then press the REPEAT button on the front  
panel once. The REPEAT indicator begins flashing in the display. If necessary,  
press the PLAY/PAUSE  
button to begin playback. The selected track will be  
repeated continuously.  
REPEAT PLAY  
All Tracks Repeat  
Press the REPEAT button on the front panel twice. The REPEAT indicator remains  
in the display. If necessary, press the PLAY/PAUSE  
button to begin playback.  
The entire disc will be repeated continuously.  
REPEAT PLAY  
To cancel Repeat playback press the REPEAT button on the front panel until the  
REPEAT indicator no longer appears in the display. Repeat Playback mode may  
also be canceled by pressing the STOP button twice, switching to Radio function,  
or pressing the STANDBY/ON  
button to shut the power ‘Off’.  
22  
CKD2328_2330_B091103.p65  
22  
11/9/2003, 14:51  
RANDOM Playback (Model CKD2330 Only)  
When the Random Playback mode is selected all the tracks on the disc will be  
played in random order. Random Playback mode can be selected while the disc is  
playing or while the disc is stopped.  
Press the RANDOM button on the remote control (Model CKD2330 Only). There  
is no Random button on the front panel. The RANDOM indicator appears in the  
display. If necessary, press the PLAY/PAUSE  
button to begin playback.  
PLAY  
RANDOM  
The player will randomly select a track and begin playback. After each track plays  
once the player stops and the display again shows the total number of tracks on  
the disc. However the RANDOM indicator remains in the display.  
To cancel Random Playback press the RANDOM button again until the RANDOM  
indicator disappears. Random playback may also be canceled by pressing the  
STOP button twice, switching to Radio function, or pressing the STANDBY/ON  
button to shut the power ‘Off’.  
23  
CKD2328_2330_B091103.p65  
23  
11/9/2003, 14:51  
PROGRAMMED PLAYBACK  
Use the Programmed Playback feature to play up to 20 tracks on a disc in any  
desired order. You may also program a particular track to play several times within  
a programmed sequence if desired.  
NOTES:  
(A.)You cannot program a disc while it is playing. Press the STOP button to  
stop playback and then follow the programming steps below.  
(B.)Programming is only possible with the front panel control. There is no  
PROGRAM button on the remote control.  
1.) Load your disc as usual and wait until the display shows the total number of  
tracks on the disc.  
2.) Press the PROGRAM button on the front panel. The PROGRAM indicator  
and Program Memory number “01” begin flashing in the display.  
PROGRAM  
24  
CKD2328_2330_B091103.p65  
24  
11/9/2003, 14:51  
3.) Press the SKIP Forward  
or SKIP Reverse  
buttons to select the first  
track number to be programmed. Example: Track number 7.  
PROGRAM  
When the desired track number appears in the display press the PROGRAM  
button again. Track 7 is now entered in Program Memory number “01”. The  
program memory number now advances to number “02” and continues flashing.  
PROGRAM  
4.) Repeat step 3, selecting a different track number each time until you have  
entered up to 20 tracks in the program memory. To confirm the program after  
you have entered the last track press the PROGRAM button once more. The  
display will scroll through all the tracks you programmed in sequence.  
5.) When you have completed programming the desired tracks press the PLAY/  
PAUSE  
button to begin programmed playback. The PLAY and PROGRAM  
indicators appear in the display. Playback will begin on the first track you  
programmed and will continue until the last programmed track has played.  
PLAY  
PROGRAM  
25  
CKD2328_2330_B091103.p65  
25  
11/9/2003, 14:51  
6.) When the program is completed the player stops and the display again shows  
the total tracks on the disc. However the PROGRAM indicator remains in the  
display and the player remains in the Programmed Playback mode.  
PROGRAM  
If you press the PLAY/PAUSE  
button the programmed sequence will play  
again. To cancel the Programmed Playback mode press the STOP button  
while the player is stopped. The PROGRAM indicator goes off. Programmed  
Playback may also be canceled by switching to Radio function, or pressing  
the STANDBY/ON  
button to shut the power ‘Off’.  
Programmed Repeat Playback  
You may use the Programmed Playback and Repeat features together to  
continuously repeat a programmed sequence. First program the desired sequence  
according to steps 1 through 5 on pages 24-25. When Programmed Playback  
begins press the REPEAT button twice to select the Repeat All Tracks mode. The  
REPEAT indicator appears in the display together with the PROGRAM and PLAY  
indicators. The programmed sequence will be repeated continuously.  
REPEAT PLAY  
PROGRAM  
26  
CKD2328_2330_B091103.p65  
26  
11/9/2003, 14:51  
ALARM Function  
You can use the alarm function to wake you to an electronic buzzer tone, the radio,  
or your favorite CD.  
First press the ALARM SET button on the front panel to check the Wake Up time  
setting. Adjust the Wake Up time if necessary. Then press the ALARM ON/OFF  
button on the top panel. The Alarm “On” indicator  
appears in the display.  
Wake To Buzzer  
Press the STANDBY/ON  
button to put the system in the Standby (Power ‘Off’)  
/BUZZER switch on the top panel to the BUZZER  
mode. Set the MUSIC  
position. At the selected wake up time the buzzer will sound. It will continue for  
one hour and then shut off automatically. To stop the alarm sooner press the  
ALARM ON/OFF button once or STANDBY/ON  
button on the front panel.  
Wake To Radio  
Tune to the desired radio station and adjust the volume to the level you want to  
hear in the morning when the alarm comes on. Press the STANDBY/ON  
button  
to put the system in the Standby (Power ‘Off’) mode. Set the MUSIC  
/BUZZER  
switch on the top panel to the MUSIC  
position. At the selected wake up  
time the radio will turn on. It will continue for one hour and then shut off automatically.  
To stop the radio sooner press the ALARM ON/OFF button once or STANDBY/  
ON  
button on the front panel.  
27  
CKD2328_2330_B091103.p65  
27  
11/9/2003, 14:51  
Wake To CD  
Load the desired CD, begin playback and adjust the volume to the desired level.  
Press the STANDBY/ON  
button to put the system in the Standby (Power ‘Off’)  
/BUZZER switch on the top panel to the MUSIC  
mode. Set the MUSIC  
position. At the selected wake up time the CD will begin to play. It will continue for  
one hour, or until the end of the disc, and then shut off automatically. To stop the  
CD sooner, press the ALARM ON/OFF button once or STANDBY/ON  
button  
on the front panel.  
Automatic Alarm Repeat  
The Alarm will automatically repeat each day at the selected Wake Up time as  
long as the Alarm indicator appears in the display. To cancel the alarm, press  
the ALARM ON/OFF button on the top panel until the Alarm indicator  
disappears.  
Note: When the Alarm is turned “On”, the Standby LED indicator will flash.  
28  
CKD2328_2330_B091103.p65  
28  
11/9/2003, 14:51  
SNOOZE Function  
After the alarm turns on in the morning you can use the Snooze function to grab a  
few more minutes sleep before the alarm sounds again. To activate the Snooze  
function you can press the SNOOZE button on the top cabinet, or you can simply  
wave your hand in front of the Snooze Sensor on the front panel.  
The effective operating range of the Snooze Sensor is approximately 2 inches.  
The Snooze function will stop the alarm for 5 minutes and then turn the alarm on  
again. The Snooze operation can be repeated several times within one hour. But  
after one hour the alarm will not turn on again.  
Remote Snooze Operation (Model CKD2330 Only)  
After the alarm comes on in the morning you may also activate the SNOOZE  
function by pressing any button on the remote control EXCEPT THE STANDBY/  
ON BUTTON. The alarm will stop for 5 minutes and then turn on again.  
29  
CKD2328_2330_B091103.p65  
29  
11/9/2003, 14:52  
SLEEP TIMER (Front Panel Only)  
This system includes a programmable Sleep Timer that allows you to fall asleep  
from 59 minutes of music and then shuts the power ‘Off’ automatically.  
To Operate The Sleep Timer:  
1.) Turn the system ‘On’ and operate either the Radio or CD function as usual.  
2.) Adjust the Volume level controls to the desired level. Remember that the level  
you select for the sleep to music function is the same level you will hear when  
the timer turns the system on in the morning.  
3.) Press and hold the SLEEP button on the front panel. There is no SLEEP  
button on the remote control.  
4.) The display will show “0:59” indicating that the sleep timer will shut the power  
off after 59 minutes. The SLEEP indicator flashes in the display. Continue  
holding the SLEEP button to decrease the amount of Sleep Timer operation.  
Release the SLEEP button when the display shows the desired amount of  
Sleep time.  
SLEEP  
5.) The Sleep Time display disappears. The SLEEP indicator stops flashing. When  
the Sleep Timer counts down to “00”, the power shuts off automatically.  
SLEEP  
30  
CKD2328_2330_B091103.p65  
30  
11/9/2003, 14:52  
NOTES:  
You can shut the unit off manually before the Sleep Timer counts down to “00”  
by pressing the STANDBY/ON  
button at any time. Or just cancel the Sleep  
Timer by pressing the SNOOZE button.  
• Remember that if you are falling asleep to CD you will also wake to CD, and if  
you fall asleep to the radio you will also wake to the radio.  
• If you are falling asleep to CD, the system will only operate until the CD ends.  
If you set the Sleep Timer for 59 minutes but your CD is only 45 minutes long,  
the music will stop after 45 minutes.  
IMPORTANT:  
When the SLEEP function is on, the Radio Frequency will always appear on  
the display. The CLOCK SET and ALARM SET functions will be disabled,  
you can still check the ALARM wake up time by pressing the ALARM SET  
button, but pressing the CLOCK SET button has no effect during Sleep Timer  
operation.  
Power Failure During Sleep Timer Operation  
If you experience a power failure during Sleep Timer operation an incorrect time  
(such as "3545") may appear on the display. If this occurs please perform the  
following steps to correct the time display:  
1.) Press the STANDBY/ON  
button to turn the system 'On'.  
2.) Press the SLEEP button once.  
3.) Press the STANDBY/ON  
button again to turn the system 'Off'.  
The time display will return to normal.  
31  
CKD2328_2330_B091103.p65  
31  
11/9/2003, 14:52  
MUTE Function (Model CKD2330 Only)  
To stop the sound from the speakers temporarily press the MUTE button on the  
remote control handset. The Mute indicator light (red) comes on. The sound stops  
but the unit remains ‘On’. Press the MUTE button again to cancel Mute function  
and restore the sound. The Mute indicator light (red) goes off.  
Display Dimmer  
The brightness of the display is automatically adjusted for the room light conditions.  
The display brightness will be reduced when the room lighting is tuned off so as  
not to interfere with your sleep. The display will brighten automatically in daylight or  
when the room lights are turned on again for better visibility.  
Headphone  
Jack  
The Stereo Headphone Jack is located on the right side panel. Connect a set of  
stereo headphones (not included) to this jack for private listening without disturbing  
others. The internal speakers are automatically disconnected when headphones  
are connected to the headphone jack.  
IMPORTANT: When using headphones always set the volume control to a  
low level before you put the headphones on. Then put the headphones on and  
gradually increase the volume to a comfortable listening level.  
32  
CKD2328_2330_B091103.p65  
32  
11/9/2003, 14:52  
CARE AND MAINTENANCE  
COMPACT DISC CARE  
To remove a disc from its storage case, press down on the center of the case  
and lift the disc out, holding it carefully by the edges.  
Fingerprints and dust should be carefully wiped off the disc’s recorded surface  
with a soft cloth.Unlike conventional records, compact discs have no grooves  
to collect dust and microscopic debris, so gently wiping with a soft cloth should  
remove most particles. Wipe in a straight line from the inside to the outside of  
the disc. Small dust particles and light stains will have absolutely no effect on  
reproduction quality.  
Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents  
or abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit.  
Never write on or affix labels to the surface of compact discs.  
CARE OF THE CABINET  
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax,  
polish sprays, or abrasive cleaners on the cabinet.  
CAUTION  
Never allow any water or other liquids to get inside the unit while cleaning.  
33  
CKD2328_2330_B091103.p65  
33  
11/9/2003, 14:52  
LIMITED WARRANTY  
Emerson Radio Corp. warrants manufacturing defects in original material, including  
original parts and workmanship, under normal use and conditions, for a period of  
ninety (90) days from the date of original purchase in the U.S. With your dated  
proof of purchase, we will provide repair service at no charge for labor and parts at  
an authorized Depot Repair Facility, or replace the product in our discretion. For  
repair or replacement, pack your unit in a padded box, enclose your check or  
money order payable to Emerson Radio Corp. in the amount of $9.00 (not required  
by California residents) to cover shipping and handling costs, and enclose a copy  
of your proof of purchase. Send your unit to:  
Emerson Radio Corp.  
1901 Diplomat Drive.  
Farmers Branch, TX 75234.  
This warranty does not cover damage from negligence, misuse, abuse, accident,  
failure to follow operating instructions, commercial use, rental, repairs by an  
unauthorized facility, or products purchased, used, serviced or damaged outside  
of the United States.  
THIS WARRANTYGIVES YOU SPECIFIC LEGAL RIGHTS, ANDYOU MAY  
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.  
AU898M  
TO FIND THE LOCATION AND PHONE  
NUMBER OF YOUR NEAREST SERVICE  
R
CENTER PERMITTED TO PERFORM  
WARRANTY...  
SERVICE  
CALL TOLL FREE: 1-800-695-0098  
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE  
PLEASE CALL:  
1-800-898-9020  
FOR CUSTOMER SERVICE, PLEASE WRITE TO:  
Emerson Radio Corp.  
Consumer Affairs Dept.  
1901 Diplomat Drive,  
Farmers Branch, TX 75234.  
34  
CKD2328_2330_B091103.p65  
34  
11/9/2003, 14:52  
R
EMERSON  
Part No.: 16-2911B  
309-01  
Printed in China  
CKD2328_2330_B091103.p65  
35  
11/9/2003, 14:52  

Nokia 5510 User Manual
Maxtor OneTouch STM305004OTA3E1 RK User Manual
LG Electronics Chocolate BL20 User Manual
Kenwood KDC 2023 User Manual
Kenwood CD RECEIVER KDC 4060RA User Manual
Intel 520 120 Gb 25" Internal Solid State Drive SSDSA2BW120A301 User Manual
Hitachi Deskstar 180GXP User Manual
Cuisinart Classic DCC 1200BCH User Manual
Asus P4S800D X User Manual
APC Net Shelter SC 260W User Manual