EDGE Tech Corp Computer Drive HD3U 500 User Manual

USB External Hard Drive  
Installation Guide  
USB 2.0 and 1.1  
Windows &  
Macintosh  
disk capacities ranging from  
model numbers ranging from  
through  
500GB HD3U-500  
through  
40GB HD3U-40  
Table of Contents  
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv  
PC Compatible . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Macintosh System Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Disconnecting the USB Hard Drive from a Computer . . . . . . . . . . . . . . . . . . . 12  
Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Shutting Down the USB Hard Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
TEAC USB Hard Drive Installation Guide  
i
List of Figures  
Figure 11. Select Specify a Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Figure 12. Select Genesys Folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Figure 13. Ready to Install the Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Figure 14. Completing Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Figure 15. USB Hard Drive Icon Mounted on Macintosh Desktop . . . . . . . . . 11  
Figure 16. Disk Utility Erase Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Figure 17. Unplug or Eject Hardware Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
ii  
TEAC USB Hard Drive Installation Guide  
Safety Precautions  
TEAC Hard Drives (HD) are high-precision electronic devices. Do not use them in any  
manner other than as specified in this manual. Please read this manual in its entirety before  
you begin the installation procedure. Use of controls, adjustments, or performance of  
procedures other than those specified herein may result in hazardous radiation exposure.  
To prevent fire or shock, do not expose the unit to moisture or rain.  
To prevent electrical shock, do not attempt to disassemble the hard drive. Refer servicing  
to authorized personnel.  
A user who changes or modifies the unit or operating procedures specified herein without  
express written approval by the manufacturer will void user authority to operate the  
equipment.  
Specifications and features are subject to change without notice or obligation.  
FCC Radio Frequency Interference Regulations  
Warning: This equipment generates, uses, and can radiate radio frequency energy and if  
not installed and used in accordance with the instructions contained in this manual, may  
cause harmful interference to radio and television communications. This equipment has  
been tested and found to comply with the limits for a Class B digital device pursuant to  
Subpart J of Part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. However, there is no  
guarantee that interference will not occur in a particular installation. To ensure compliance  
with FCC rules, the cable that connects the unit to the computer must be a shielded interface  
cable.  
Note: Connecting this device to peripheral devices that do not comply with Class B  
requirements or using an unshielded peripheral cable could result in interference to radio  
or television reception. To ensure that the use of this product does not contribute to  
interference, use a shielded interface cable.  
If this equipment does cause harmful interference to radio or television reception (which  
can be determined by turning the equipment off and on), the user may try to correct the  
interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Move the device and the receiver further apart.  
• Connect the equipment to an electrical outlet on a different circuit than the receiver.  
• Consult the dealer or an experienced audio television technician.  
Also, the following booklet may prove helpful: How to Identify and Resolve Radio-TV  
Interference Problems. It is available from the U.S. Government Printing Office,  
Washington, D.C. 20402, stock number 004-000-00345-4.  
The user is cautioned that any changes or modifications not expressly approved by TEAC  
America, Inc. could void the user’s warranty.  
TEAC USB Hard Drive Installation Guide  
iii  
   
Copyright and Trademark Information  
This manual is copyright © 2005 by TEAC America, Inc.  
• TEAC is a trademark of TEAC Corporation.  
• IBM PC is a registered trademark of International Business Machines Corporation.  
• Windows, Windows 95, Windows 98SE, Windows Me, Windows 2000 Professional,  
Windows XP and Windows NT are trademarks or registered trademarks of Microsoft  
Corporation.  
• Apple and Macintosh are registered trademarks of Apple Computer, Inc.  
• All other trademarks and registered trademarks are the property of their respective  
owners.  
© Copyright 2005 TEAC America, Inc. All rights reserved. TEAC America, Inc. reserves  
the right to modify product offerings or specifications without advance notice. No part of  
this publication may be produced in any format without the express written permission of  
TEAC America, Inc.  
Registration Information  
There is no need to register any portion of this kit. Refer to “Technical Support” on page 13  
if you wish to contact TEAC.  
Product Warranty Information  
This TEAC Hard Drive features a one year warranty from the date of purchase. Please keep  
your receipt as proof of purchase. Refer to “Limited Warranty” on page 14 for warranty  
information.  
About This Guide  
This guide, the TEAC USB Hard Drive Installation Guide, explains how to install and  
operate TEAC USB 2.0/1.1 external hard drives (all capacities). This guide is divided into  
the following main sections:  
Introduction: This section introduces the USB hard drive and describes recommended  
system requirements and shipping package contents.  
Connecting the Hard Drive: This section explains how to connect the USB hard drive to  
your computer.  
Installing the Driver Software: This section explains how to install the appropriate driver  
software (Windows 98 only) from the included CD-ROM.  
Specifications: This appendix provides technical specifications for the TEAC USB Hard  
Drives.  
Technical Support: This appendix provides technical support listings for TEAC in North  
America.  
iv  
TEAC USB Hard Drive Installation Guide  
       
Introduction  
Thank you for purchasing the TEAC External USB 2.0/1.1 Hard Drive kit.  
TEAC USB hard drives are external peripheral devices designed for use with IBM  
PC (or compatible) or Macintosh computers that feature a USB (Universal Serial Bus)  
port, version 2.0 or 1.1.  
The hard drives are also backward compatible with USB 1.1.  
The USB hard drives are available in capacities ranging from 40GB to 500GB.  
The connection and installation procedure is the same for all configurations.  
TEAC USB hard drives are hot-swappable and can achieve data transfer rates of  
up to 480Mbits/sec when operating in USB 2.0 mode. (See “Specifications” on  
page 13 for details.)  
Minimum System Requirements  
An available USB port (USB version 1.1 or 2.0)  
To achieve high speed USB 2.0 performance, your computer must feature a  
built-in USB 2.0 port. Otherwise, you must install a third-party USB 2.0 PCI  
controller card (not included in this kit) in your computer.  
If you plan to connect the USB hard drive to a USB 2.0 hub, use only a self-  
powered USB 2.0 hub.  
CD-ROM drive (to install driver software for Windows 98SE only) or Inter-  
net access (to download driver software)  
PC Compatible  
IBM PC-compatible Pentium II 300MHz computer  
Windows 98SE/Me/2000/XP (Windows 95 and NT 4.0 are not supported)  
64MB of RAM  
Macintosh  
Apple Macintosh G3 (or higher processor) computer  
Mac OS X v10.0 or later (earlier versions not supported)  
32MB RAM  
TEAC USB Hard Drive Installation Guide  
1
       
USB Hard Drive Package Contents  
USB Hard Drive Package Contents  
The TEAC USB Hard Drive kit includes the following items (Figure 1).  
TEAC External USB 2.0/1.1 Hard Drive  
CD-ROM containing driver software (required for Windows 98SE only)  
USB 2.0/1.1 interface cable  
120V AC power adapter and cable  
Vertical support stand  
TEAC USB External Hard Drive Installation Guide (this booklet)  
Note: A USB 2.0 adapter card is not included in this kit.  
Installation Guide  
power cable  
AC power adapter  
CD-ROM  
(USB driver)  
USB interface cable  
support stand  
TEAC USB External Hard Drive  
Figure 1. USB Hard Drive Kit Package Contents  
Note: If any of the items above is missing from your kit upon purchase, please  
contact the vendor immediately for a replacement kit.  
2
TEAC USB Hard Drive Installation Guide  
   
Front and Rear Panels  
Front and Rear Panels  
Figure 2 illustrates the front and rear panels of the USB hard drive.  
LED status indicator  
USB 2.0 port  
DC IN power input connector  
Power switch  
LED status indicator: Lights up (green) at power on. Flashes (orange)  
during data read and write operations.  
connector. (The other end of the USB cable connects to a USB 2.0/1.1 port  
on your computer. See “Connecting the USB Hard Drive to an IBM PC-  
Compatible or Macintosh System” on page 5.)  
DC IN power connector: Connect the included power cord to this input  
connector. Plug the other end into an AC power outlet. (For more  
information, see “Connecting the USB Hard Drive to an IBM PC-Compatible  
or Macintosh System” on page 5).  
Note: To ensure proper operation, use only the original AC power  
adapter and cord with your TEAC USB hard drive.  
Power switch: Turns the power on or off.  
TEAC USB Hard Drive Installation Guide  
3
   
Connecting the USB Hard Drive  
Connecting the USB Hard Drive  
This section explains how to connect the USB hard drive to an IBM PC-  
compatible or Macintosh computer. It also explains how to install the driver  
software (Windows 98 only).  
Drive Orientation  
Position your USB hard drive horizontally on a stable, flat surface. The TEAC  
logo should face up.  
Alternatively, you can use the included vertical support stand to position the USB  
hard drive in a vertical orientation to save desktop space (Figure 3).  
horizontal orientation  
vertical support stand  
Figure 3. Hard Drive Orientation  
4
TEAC USB Hard Drive Installation Guide  
     
Connecting the USB Hard Drive to an IBM PC-Compatible or Macintosh System  
Connecting the USB Hard Drive to an IBM PC-Compatible or Macintosh  
System  
Note: The following steps (1-8) apply to both IBM PC-compatible and  
Macintosh systems.  
1. Turn off the power to your USB hard drive.  
2. Turn on the power to your computer.  
3. Insert the power cable plug into the DC IN input connector on the rear  
panel of the USB hard drive (Figure 4 and Figure 5).  
DC IN power input  
power cable  
plug  
Step 3  
USB 2.0 port  
USB 2.0 cable  
Step 7  
Figure 4. Connecting USB and Power Cables to External USB Hard Drive  
4. Insert the power cable’s female connector into the AC power adapter  
block (Figure 5 on page 6).  
5. Plug the other end of the power cable into an AC outlet (Figure 5 on  
page 6).  
TEAC USB Hard Drive Installation Guide  
5
   
Connecting the USB Hard Drive to an IBM PC-Compatible or Macintosh System  
Step 5  
Step 4  
to AC outlet  
AC power adapter  
Step 3  
power cable  
to USB  
Hard Drive  
DC IN  
Power Input  
Figure 5. Connecting the Power Adapter and Cable  
6. Connect the wider plug of the included USB 2.0 cable to a USB port on  
your computer (Figure 6).  
USB 2.0/1.1 port  
on computer  
USB 2.0 cable  
Step 6  
Figure 6. Connecting to USB Port on Computer  
7. Connect the other end of the USB 2.0 cable to the USB 2.0 port on the  
rear panel of the USB hard drive (Figure 4 on page 5).  
Note: If you are connecting the cable to a USB 2.0 hub, use a USB hub that  
features an AC power adapter. Connect the cable directly to a USB 2.0 port  
on the keyboard.  
8. Turn on the power switch on the USB hard drive.  
Confirm that the Power LED on the USB hard drive lights up.  
Note: If you have an IBM PC-compatible, continue with the “Installing the  
Driver Software” on page 7. If you have a Macintosh system, continue with  
“Macintosh System Installation” on page 11.  
6
TEAC USB Hard Drive Installation Guide  
   
Installing the Driver Software  
Installing the Driver Software  
Installation of the TEAC-provided driver depends on the Windows version in your  
IBM-compatible computer. This driver is required only for Windows 98SE. For  
Installing the Driver Software on Windows Computers  
Windows Me/2000/XP  
1. Connect the USB hard drive to your computer and turn on the power  
switch on the USB hard drive (as explained in “Connecting the USB  
Hard Drive to an IBM PC-Compatible or Macintosh System” on  
page 5).  
Windows Me/2000/XP automatically detects and identifies the new device as  
a “USB Mass Storage Device” and installs the appropriate drivers. (There is  
no need to load the driver CD-ROM for Windows Me/2000/XP.)  
Figure 7. Found New Hardware Panel  
(If Windows displays a Hardware Update Wizard, click the Recommended  
option, then click Next to proceed.)  
2. When the installation is complete, restart your computer.  
Windows displays an icon for the USB hard drive in the My Computer panel  
(Figure 8). The USB hard drive is preformatted as a single FAT32 partition  
and is ready for use.  
USB Hard Drive icon  
Figure 8. Windows “My Computer” Panel  
TEAC USB Hard Drive Installation Guide  
7
         
Installing the Driver Software on Windows Computers  
Windows 98SE (Second Edition)  
Note: If your computer runs Window 98SE, you must install the drivers from the  
1. Insert the included CD-ROM Driver Installation disc into your com-  
puter’s CD-ROM drive.  
2. Connect the USB cable to the USB port on your computer (Figure 6 on  
page 6).  
Windows detects the new device and displays an Add New Hardware Wizard panel  
(Figure 9).  
Figure 9. Add New Hardware Wizard  
3. Click the Next button.  
Windows displays the following Add New Hardware Wizard panel (Figure 10).  
Figure 10. Search for Best Driver  
8
TEAC USB Hard Drive Installation Guide  
     
Installing the Driver Software on Windows Computers  
4. Select the option Search for the best driver for your device, then click the Next  
button (Figure 10).  
Windows displays the following Add New Hardware Wizard panel (Figure 11).  
Figure 11. Select Specify a Location  
5. Select only the Specify a location option, then click the Browse button  
(Figure 11).  
The Hardware Wizard displays the Browse for Folder panel (Figure 12).  
Figure 12. Select Genesys Folder  
6. In the Browse for Folder panel, select the Drivers CD-ROM disc. Click to high-  
light the Genesys folder, and then click the OK button (Figure 12).  
The Hardware Wizard panel is displayed.  
TEAC USB Hard Drive Installation Guide  
9
   
Installing the Driver Software on Windows Computers  
7. Click the Next button to load the drivers from the Genesys folder.  
The Hardware Wizard locates the drivers on the CD-ROM disc and displays  
the following panel (Figure 13).  
Figure 13. Ready to Install the Driver  
8. Click the Next button (Figure 13).  
The Hardware Wizard installs the appropriate driver and displays the  
following panel (Figure 14).  
Figure 14. Completing Driver Installation  
9. Click the Finish button to complete the installation (Figure 14).  
When the installation is complete, Windows displays an icon for the USB  
hard drive in the My Computer panel (Figure 8 on page 7). The USB hard  
drive was preformatted as a single FAT32 partition and is now ready for use.  
10  
TEAC USB Hard Drive Installation Guide  
   
Installing the Driver Software on Windows Computers  
Macintosh System Installation  
TEAC USB hard drive with a Macintosh computer. (Earlier versions of the Mac  
OS are not supported.)  
1. Connect the USB hard drive to your computer, then turn on the power  
to the USB hard drive.  
(Refer to “Connecting the USB Hard Drive to an IBM PC-Compatible or  
Macintosh System” on page 5).  
The Macintosh automatically detects the USB hard drive and displays the  
icon for the USB hard drive on your Macintosh desktop (Figure 15).  
It may take a couple of minutes to mount the USB hard drive on your desktop  
the first time you connect it to the system. Do not disconnect the USB hard  
drive, or cut the power to the USB hard drive, during this process.  
Figure 15. USB Hard Drive Icon Mounted on Macintosh Desktop  
Note: The USB hard drive is preformatted as a FAT32 partition. TEAC  
recommends that you re-initialize the USB hard drive using the Mac OS X Disk  
Utility (Figure 16 on page 11).  
Re-initializing the USB Hard Drive Using the Apple Disk Utility  
1. In the Disk Utility, click the Erase tab, and highlight the unlabeled disk  
(Figure 16).  
2. For the Volume Format option, select Mac OS Extended  
.
3. In the Name field, key in a name for your USB hard drive.  
4. Click the Erase button, then follow the displayed instructions.  
Figure 16. Disk Utility Erase Tab  
TEAC USB Hard Drive Installation Guide  
11  
       
Disconnecting the USB Hard Drive from a Computer  
Disconnecting the USB Hard Drive from a Computer  
Caution: Follow the steps below that are appropriate for your computer system  
before you disconnect the USB hard drive from your computer. Failure to do so  
may result in loss of data.  
Windows  
1. Double-click the Windows “Unplug or Eject Hardware” icon in your  
system tray.  
Windows displays the Unplug or Eject Hardware panel (Figure 17).  
Figure 17. Unplug or Eject Hardware Panel  
2. Select USB Mass Storage Device, then click the Stop button.  
Windows displays a confirmation panel.  
3. Click the OK button to confirm your selection.  
You may now safely disconnect the USB hard drive from your computer.  
Macintosh  
Drag the icon for the USB hard drive (see Figure 15 on page 11) to the Trash icon  
on the Macintosh desktop. You may now safely disconnect the USB hard drive  
from your computer.  
Shutting Down the USB Hard Drive  
Turn off the power to the USB hard drive only after you disconnect the USB hard  
drive from your computer or have shut down your computer system. Do not turn  
off the power switch on the USB hard drive while the computer is operating.  
12  
TEAC USB Hard Drive Installation Guide  
         
Specifications  
The following table lists the product specifications for TEAC USB external hard  
drive.  
Models  
TEAC USB 2.0/1.1 External Hard Drives  
Model numbers: HD3U-500, HD3U-400, HD3U-300,  
HD3U-250, HD3U-200, HD3U-160, HD3U-120, HD3U-80,  
HD3U-40  
Capacity  
HD3U-500: 500GB, HD3U-400: 400GB, HD3U-300: 300GB,  
HD3U-250: 250GB, HD3U-200: 200GB, HD3U-160: 160GB  
HD3U-120: 120GB, HD3U-80: 80GB, HD3U-40: 40GB  
Interface  
USB 2.0/USB 1.1  
Data Transfer Rate  
USB 2.0  
USB 1.1  
480Mb/sec (high speed)  
12Mb/sec (full speed)  
1.5Mb/sec (low speed)  
n/a  
12Mb/sec (full speed)  
1.5Mb/sec (low speed)  
Access Time  
Buffer  
Spindle Speed  
MTBF  
9.5 msec  
2MB to 16MB (model dependent)  
7200RPM  
100,000 POH  
Dimensions  
3
8
3
4
3
4
5 -- inches (W) x 1 -- inches (H) x 8 -- inches (D)  
Weight  
2.0 lbs  
Power Requirement  
Installation  
120VAC (AC adapter included)  
Horizontal or vertical in support stand, plus or minus 10°  
Operating Temperature 5° C to 40° C (41° F to 104° F)  
Storage Temperature  
Safety Standards  
Warranty  
-30° C to 60° C (-22° F to 140° F)  
UL, FCC  
One year  
Technical Support  
For technical support, please contact the TEAC Service and Support Center:  
North America  
TEAC America, Inc. (USA)  
Technical Support  
Telephone: (323) 727-4860 • Fax: (323) 869-8751  
Monday - Friday 8:00 a.m. - 5:00 pm PST  
TEAC USB Hard Drive Installation Guide  
13  
       
Limited Warranty  
Limited Warranty  
This product is warranted by TEAC America, Inc. against defects in materials and workmanship.  
LENGTH OF WARRANTY This warranty will be effective for both labor and parts, and this  
warranty will be effective for one (1) year from the date of original purchase.  
WHO MAY ENFORCE THE WARRANTY - This warranty is valid only in the United States, and  
enforceable only by the original purchaser. This warranty is not valid outside the United States.  
WHAT IS NOT COVERED BY THIS WARRANTY  
1. Damage to or deterioration of the external cabinet.  
2. Damage resulting from accident, misuse, abuse, or neglect.  
3. Damage resulting from failure to follow instructions contained in your user’s manual.  
4. Damage occurring during shipment of the product (claims must be presented to the carrier).  
5. Damage resulting from repair or attempted repair by anyone other than TEAC Service Department.  
6. Damage resulting from modification or attempted modification of product not authorized by  
TEAC.  
7. Damage resulting from causes other than product defects, including lack of technical skill,  
competence, or experience of the user.  
8. Damage to any unit that has been altered or on which the serial number has been defaced, modified  
or removed.  
9. Damage or malfunction resulting from installation and cabling.  
10. For wireless configurations, TEAC cannot be responsible for interference or operation in locations  
that restrict range.  
11.Damage to or from interconnected network equipment.  
12.Data integrity or loss of data.  
HOW YOU CAN GET WARRANTY SERVICE Please contact the TEAC service department for  
a Return Authorization number before shipping unit(s) to TEAC. Information required for R/A request  
should include your name and/or company name, telephone number, TEAC model, version and serial  
number(s). Return Authorization (R/A) number must be clearly marked on the outside of each carton  
shipped to TEAC. Return merchandise must be packed in original shipping containers or otherwise  
packed adequately to prevent damage in shipment. You are responsible for all risk of damage to or loss  
of merchandise in transit to TEAC. TEAC reserves the right to reject any merchandise that is not  
packaged and/or marked as instructed herein. You must pay any shipping charges if it is necessary to  
ship the product for service. However, if the necessary repairs are covered by the warranty, we will  
pay the return shipping charges to any destination within the United States. Whenever warranty service  
is required, you must present a copy of the original dated sales receipt as proof of warranty coverage.  
Please contact us at the addresses listed at the end of this warranty statement.  
WHAT TEAC WILL PAY FOR We will pay all labor and material expenses for items covered by  
the warranty. Payment of shipping charges is discussed in the next section of this warranty.  
LIMITATION OF IMPLIED WARRANTIES  
ANY IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR  
A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE LENGTH OF THIS WARRANTY.  
EXCLUSION OF DAMAGES  
TEAC’S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO REPAIR OR REPLACEMENT OF  
THE PRODUCT, AT TEAC’S OPTION. TEAC SHALL NOT BE LIABLE FOR DAMAGES BASED UPON  
INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, INTERRUPTED OPERATION OR  
COMMERCIAL LOSS, LOST PROFITS OR ANY OTHER DAMAGES, WHETHER INCIDENTAL,  
CONSEQUENTIAL, PUNITIVE OR OTHERWISE.  
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/  
OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL  
DAMAGES, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU.  
THIS WARRANTY GIVES YOU SPECIFIC RIGHTS, AND MAY VARY FROM SOME OF THE RIGHTS  
PROVIDED BY LAW. THESE RIGHTS MAY VARY FROM STATE TO STATE.  
To contact the TEAC Service Center in the United States:  
Telephone: 1-323-727-7694 or 1-323-727-7616  
Fax: 1-323-727-7606  
TEAC America, Inc.  
7733 Telegraph Road  
Montebello, California 90640  
14  
TEAC USB Hard Drive Installation Guide  
   

Nokia 2690 User Manual
Kyocera Deco E1000 User Manual
Jwin JX 43000D User Manual
Jura Capresso IMPRESSA S90 User Manual
ID Tech 25 User Manual
HTC Smart Phone Butterfly User Manual
Hitachi Travelstar HTS722080K9A300 User Manual
GE PROFILE JP989CH User Manual
FieldServer Weigh Tronix FS 8700 36 User Manual
Black & Decker DE40 User Manual