User's Guide
DellTM OptiPlexTM SFF 980 All In One (AIO) Stand
The Dell OptiPlex SFF 980 All-in-One Stand is a unique
design that can integrate monitor, system and cables
management to adapt to your unique environment.
1/15
Contents
1 About your Dell OptiPlex SFF 980 AIO Stand ………………………………………………….. 4
2 Setting up the Dell OptiPlex SFF 980 AIO Stand ………………………………………………. 6
3 Specifications …………………………………………………………………………................... 15
4 Finding Information ……………………………………………………………………................. 15
3/15
About your Dell OptiPlex SFF 980 AIO Stand
1
1 DELL Monitor: P190S / 1909W / P2210
2 DELL Quick Release Monitor Mounting Plate
3 Locking Cable Cover
4 Swiveling Base - 360o Pan
5 System Chassis: Dell OptiPlex SFF 980
4/15
6 Handle
7 Kensington Security Lock Slot
8 Unlock Switch
9 Cable management clip
10 Cable Cover Lock Switch
11 Provided Cables: VGA, DVI, USB and Power Cord
5/15
Setting up the Dell OptiPlex SFF 980 AIO Stand
2
Components
AIO Stand, Cable Cover, VGA Cable, DVI Cable, USB Cable, Power Cord
NOTE：Refer to the Monitor and System Instruction Guides, packaged separately.
______________________________________________________________________________________
1 Place the AIO Stand on a level, stable surface.
WARNING：To reduce risk of injury and/or
equipment damage, the AIO Stand must be
placed on a level, stable surface.
6/15
2 Attach the monitor to the AIO stand.
3 Attach the computer chassis to the AIO stand.
7/15
4 Ensure the computer chassis is seated on both ends of the AIO stand.
5 Determine which monitor cable will be used (VGA or DVI) and connect it to the monitor
and computer.
8/15
6 a Connect one end of the USB cable to the monitor.
b Connect the other end of the USB cable to the computer.
7 a Connect the monitor power cord to the monitor.
b Connect the monitor power cord to the facility power outlet.
9/15
8 a Connect the system power cord to the computer.
b Connect the system power cord to the facility power outlet.
9 Connect any accessory cables (keyboard, mouse, speaker, etc.) to the computer.
10/15
10 Route the cables and power cords through the clip at the back of the AIO stand.
11 Slide the cable cover over and down to attach it to the computer chassis.
11/15
12 a Slide the switch located on the cable cover to lock the system.
b Slide the switch to lock the AIO stand.
13 Attach customer-supplied security accessory.
NOTE: This security feature is only accessible when the AIO Stand lock is engaged as
shown in Step 12.
12/15
To remove components:
a Slide the switch at the back of the stand to release system.
b Lift off the cable cover.
c Lift off the system.
13/15
Range of Motion
______________________________________________________________________________________
Physical Dimensions
14/15
Specifications
3
Physical Dimensions*
Height
16.8 inches (429 mm)
10.1 inches (255.6 mm)
16.9 inches (430.2 mm)
11.5 lbs (5.2 kg)
Depth
Width
Weight
* not including monitor and system
Monitor and System Weight Capacities
Dell Monitor: P190S / 1909W / P2210
Dell System: OptiPlex SFF 980
≦ 10.1 lbs (4.6 kg)
≦ 13 lbs (5.9 kg)
Temperature
Operating
32oF to 104℉ (0oC to 40oC)
-4oF to 140℉ (-20oC to +60oC)
-4oF to 140℉ (-20oC to +60oC)
Storage
Transportation
Security Features
Kensington Security Slot
Accepts standard Kensington Slim MicroSaver
Finding Information
If you need to:
See:
Find safety best practices information for your computer,
review Warranty information, Terms and Conditions (U.S.
only), Safety instructions, Regulatory information,
Ergonomics information, and End User Agreement.
The safety and regulatory documents that shipped with
your computer and the Regulatory Compliance
15/15
|