Dell Computer Drive CMC 32 User Manual

RACADM Command Line  
Reference Guide for  
iDRAC6 1.95, iDRAC6 3.5, and  
CMC 3.2  
41  
42  
42  
45  
46  
47  
47  
50  
52  
54  
61  
61  
62  
64  
66  
69  
71  
72  
73  
74  
79  
4
Contents  
81  
83  
85  
86  
87  
88  
89  
90  
91  
93  
94  
95  
99  
100  
101  
104  
105  
106  
106  
107  
107  
Contents  
5
108  
109  
112  
113  
114  
114  
115  
116  
117  
118  
120  
121  
123  
124  
125  
127  
128  
130  
132  
133  
134  
6
Contents  
135  
136  
139  
140  
141  
141  
143  
143  
144  
144  
148  
148  
3
.
.
.
.
.
.
151  
152  
154  
154  
155  
155  
155  
155  
155  
156  
Contents  
7
156  
157  
158  
159  
159  
159  
160  
160  
161  
162  
162  
162  
163  
163  
163  
164  
164  
164  
165  
165  
165  
166  
166  
166  
167  
167  
167  
168  
168  
168  
169  
169  
169  
8
Contents  
170  
170  
171  
171  
172  
172  
174  
175  
175  
175  
176  
176  
176  
177  
177  
177  
177  
178  
178  
179  
180  
181  
181  
182  
182  
183  
184  
184  
184  
184  
Contents  
9
185  
185  
185  
186  
186  
187  
187  
187  
188  
188  
188  
188  
189  
189  
190  
190  
190  
191  
191  
191  
192  
192  
192  
193  
193  
193  
193  
194  
194  
194  
10  
Contents  
195  
196  
196  
196  
197  
197  
198  
198  
198  
199  
199  
199  
200  
200  
201  
201  
202  
202  
202  
203  
203  
203  
203  
204  
204  
204  
204  
205  
205  
205  
205  
Contents  
11  
206  
206  
206  
206  
207  
207  
208  
209  
210  
210  
210  
210  
211  
211  
211  
211  
212  
212  
212  
212  
213  
213  
214  
214  
214  
215  
215  
216  
216  
216  
12  
Contents  
217  
217  
217  
218  
218  
218  
219  
219  
219  
220  
220  
220  
220  
221  
221  
221  
221  
222  
222  
223  
223  
223  
224  
224  
224  
225  
225  
225  
225  
226  
226  
Contents  
13  
226  
226  
226  
227  
227  
227  
228  
228  
228  
228  
229  
229  
230  
230  
230  
230  
230  
230  
231  
232  
232  
232  
232  
233  
233  
14  
Contents  
233  
233  
234  
234  
234  
234  
235  
235  
235  
235  
235  
236  
236  
236  
236  
237  
237  
237  
237  
238  
238  
238  
238  
238  
239  
239  
240  
240  
240  
Contents  
15  
240  
241  
241  
241  
242  
242  
242  
242  
243  
243  
245  
246  
247  
248  
248  
249  
249  
249  
250  
16  
Contents  
251  
251  
251  
252  
252  
252  
253  
253  
253  
253  
254  
254  
254  
255  
255  
256  
256  
256  
256  
257  
257  
257  
258  
258  
258  
Contents  
17  
259  
259  
259  
259  
260  
260  
260  
260  
261  
261  
261  
261  
262  
262  
262  
263  
264  
264  
264  
264  
264  
264  
264  
264  
265  
265  
265  
266  
266  
266  
266  
266  
18  
Contents  
266  
266  
267  
267  
267  
267  
268  
268  
268  
269  
269  
269  
269  
270  
271  
271  
271  
272  
272  
272  
273  
273  
273  
273  
274  
274  
274  
275  
Contents  
19  
275  
275  
275  
276  
276  
276  
277  
277  
277  
277  
278  
278  
278  
279  
279  
279  
280  
280  
280  
280  
281  
281  
281  
282  
282  
282  
282  
282  
283  
283  
20  
Contents  
22  
Contents  
1
Introduction  
This document provides information about the RACADM subcommands,  
supported RACADM interfaces, and property database groups and object  
definitions for the following:  
iDRAC6 Enterprise on Blade Servers  
iDRAC6 Enterprise or Express on Rack and Tower Servers  
Dell Chassis Management Controller (CMC)  
Supported RACADM Interfaces  
The RACADM command-line utility provides a scriptable interface that  
allows you to locally or remotely configure your Remote Access Controller  
(RAC). The utility runs on the management station and the managed system.  
It is available on the Dell OpenManage Systems Management and  
Documentation DVD or at support.dell.com.  
The RACADM utility supports the following interfaces:  
Local — Supports executing RACADM commands from the managed  
server’s operating system. You must install the OpenManage software on  
the managed server to run local racadm commands. Only one instance of  
local RACADM can be executed on a system at a time. If the user tries to  
open another instance, an error message is displayed and the second  
instance of local RACADM closes immediately.  
SSH or Telnet — Also referred as Firmware racadm. Supports executing  
RACADM commands from a SSH or Telnet session to iDRAC.  
Remote — Supports executing RACADM commands from a remote  
management station such as a laptop or desktop computer. You must  
install the OpenManage software on the remote computer to run remote  
RACADM commands. To execute remote RACADM commands, you  
must formulate the command like a local or SSH/Telnet RACADM  
command except that you must also use the –r –i options or the –r –u –p  
options. For more information on these options, see the "RACADM  
Introduction  
23  
     
RACADM Syntax Usage  
The following section describes the syntax usage for local, SSH/Telnet, and  
Remote RACADM.  
Local RACADM  
racadm getconfig -g <groupname> [-o <objectname>] [-i  
<indexnumber>]  
racadm <subcommand>  
Example  
racadm getconfig -g idracinfo  
racadm getsysinfo  
SSH/Telnet RACADM  
racadm getconfig -g <groupname> [-o <objectname>] [-i  
<indexnumber>]  
racadm <subcommand>  
Example  
racadm getconfig -g idracinfo  
racadm getsysinfo  
Remote RACADM  
racadm -r -u -p getconfig -g <groupname> [-o  
<objectname>] [-i <indexnumber>]  
racadm -r -u -p <subcommand>  
Example  
racadm -r -u -p getconfig -g idracinfo  
racadm -r -u -p getsysinfo  
24  
Introduction  
       
RACADM Command Options  
Table 1-1 lists the options for the RACADM command.  
Table 1-1. RACADM Command Options  
Option  
Description  
-r <racIpAddr>  
Specifies the controller’s remote IP address.  
-r <racIpAddr>:<port  
number>  
Use:<port number> if the iDRAC6 port number is not  
the default port (443)  
-u <usrName>  
Specifies the user name that is used to authenticate  
the command transaction. If the -u option is used, the  
-p option must be used, and the -i option (interactive)  
is not allowed.  
-p <password>  
Specifies the password used to authenticate the  
command transaction. If the -p option is used, the -i  
option is not allowed.  
-S  
Specifies that RACADM should check for invalid  
certificate errors. RACADM stops the execution of the  
command with an error message if it detects an invalid  
certificate.  
-i <indexnumber>  
Specifies the index number for the indexed group, if  
applicable.  
-g <groupname>  
Specifies the group name if applicable.  
Specifies the object name if applicable.  
-o <objectname>  
Table 1-2 provides the supported RACADM interfaces for iDRAC6  
Enterprise and iDRAC6 Express.  
Table 1-2. Supported RACADM Interfaces  
iDRAC Type  
Local RACADM SSH/Telnet RACADM Remote RACADM  
iDRAC6 Enterprise  
iDRAC6 Express  
CMC  
= Supported;  
= Not supported  
Introduction  
25  
     
NOTE: Multiple instances of remote racadm can be executed on a management  
station, while only one instance of local racadm can be executed on a managed  
node.  
Supported RACADM Subcommands  
Table 1-3 provides the list of RACADM subcommands and their  
corresponding interface support. For detailed information of the RACADM  
subcommands including syntax and valid entries, see "RACADM  
Table 1-3. RACADM Subcommands  
Subcommand  
iDRAC6 on Blade  
Servers  
iDRAC6 on Rack and CMC  
Tower Servers  
Telnet Local  
/SSH/ RACADM RACADM SSH/S RACADM RACADM /SSH/ RACADM  
Serial erial Serial  
Remote Telnet/ Local  
Remote  
Telnet Remote  
26  
Introduction  
   
Table 1-3. RACADM Subcommands (continued)  
Subcommand  
iDRAC6 on Blade  
Servers  
iDRAC6 on Rack and CMC  
Tower Servers  
Telnet Local  
/SSH/ RACADM RACADM SSH/S RACADM RACADM /SSH/ RACADM  
Serial erial Serial  
Remote Telnet/ Local  
Remote  
Telnet Remote  
Introduction  
27  
Table 1-3. RACADM Subcommands (continued)  
Subcommand  
iDRAC6 on Blade  
Servers  
iDRAC6 on Rack and CMC  
Tower Servers  
Telnet Local  
/SSH/ RACADM RACADM SSH/S RACADM RACADM /SSH/ RACADM  
Serial erial Serial  
Remote Telnet/ Local  
Remote  
Telnet Remote  
28  
Introduction  
Table 1-3. RACADM Subcommands (continued)  
Subcommand  
iDRAC6 on Blade  
Servers  
iDRAC6 on Rack and CMC  
Tower Servers  
Telnet Local  
/SSH/ RACADM RACADM SSH/S RACADM RACADM /SSH/ RACADM  
Serial erial Serial  
Remote Telnet/ Local  
Remote  
Telnet Remote  
Introduction  
29  
Table 1-3. RACADM Subcommands (continued)  
Subcommand  
iDRAC6 on Blade  
Servers  
iDRAC6 on Rack and CMC  
Tower Servers  
Telnet Local  
/SSH/ RACADM RACADM SSH/S RACADM RACADM /SSH/ RACADM  
Serial erial Serial  
Remote Telnet/ Local  
Remote  
Telnet Remote  
Other Documents You May Need  
In addition to this guide, you can access the following guides available on the  
Dell Support website at dell.com/support/manuals. Select Choose from a list  
of all Dell products and click Continue. Click Software, Monitors,  
Electronics & PeripheralsSoftware  
Click Remote Enterprise System Management to view the documents for  
iDRAC, Lifecycle Controller, Chassis Management Controller, and  
Baseboard Management Controller Management Utilities:  
30  
Introduction  
 
The Integrated Dell Remote Access Controller 6 (iDRAC6) Enterprise  
for Blade Servers User Guide provides information about configuring  
and using an iDRAC6 for blade servers to remotely manage and  
monitor your system and its shared resources through a network.  
The Integrated Dell Remote Access Controller 6 (iDRAC6) User  
Guide provides complete information about configuring and using an  
iDRAC6 for rack and tower servers to remotely manage and monitor  
your system and its shared resources through a network.  
The CMC online Help provides information about using the CMC  
Web interface.  
The Chassis Management Controller (CMC) Secure Digital (SD) Card  
Technical Specification provides minimum BIOS and firmware version,  
installation and usage information.  
Click Enterprise System Management to view documents for  
OpenManage Server Administrator and Dell Update Package.  
The Dell OpenManage IT Assistant User’s Guide provides information  
about IT Assistant.  
The Dell OpenManage Server Administrator’s User’s Guide provides  
information about installing and using Dell OpenManage Server  
Administrator.  
The Dell Update Packages User's Guide provides information about  
obtaining and using Dell Update Packages as part of your system  
update strategy.  
The Glossary provides information about the terms used in this document.  
The following system documents are also available to provide more  
information about the system in which CMC is installed:  
The Rack Installation Guide and Rack Installation Instructions included  
with your rack solution describe how to install your system into a rack.  
The Hardware Owner’s Manual provides information about system  
features and describes how to troubleshoot the system and install or  
replace system components.  
Documentation specific to your third-party management console  
application.  
Introduction  
31  
Documentation for any components you purchased separately provides  
information to configure and install these options.  
Release notes or readme files may be included to provide last-minute  
updates to the system or documentation or advanced technical reference  
material intended for experienced users or technicians.  
For more information on IOM network settings, see the Dell PowerConnect  
M6220 Switch Important Information document and the Dell  
PowerConnect 6220 Series Port Aggregator White Paper.  
Updates are sometimes included with the system to describe changes to the  
system, software, and/or documentation. Always read the updates first  
because they often supersede information in other documents.  
See the Safety and Regulatory information that is shipped with your system.  
NOTE: Warranty information may be included within this document or as a  
separate document.  
32  
Introduction  
2
RACADM Subcommand Details  
This section provides detailed descriptions of the RACADM subcommands  
including the syntax and valid entries.  
Guidelines to Quote Strings Containing Special  
Characters When Using RACADM Commands  
When using strings that contain special characters, use the following  
guidelines:  
Strings containing the following special characters must be quoted using  
single quotes or double quotes:  
$ (dollar sign)  
" (double quote)  
' (single quote)  
` (back quote)  
\ (backslash)  
~ (tilde)  
; (semicolon)  
| (vertical bar)  
( (left parentheses)  
) (right parentheses)  
& (ampersand)  
> (greater than)  
< (less than)  
# (pound)  
ASCII code 32 (space)  
NOTE: The - (dash) character cannot be the first character of the string, regardless  
of whether the string is quoted.  
RACADM Subcommand Details  
33  
       
There are different escaping rules for single quoting versus double quoting.  
For double quoting:  
The following characters must be escaped by prepending a backslash:  
$ (dollar sign)  
" (double quote)  
' (single quote)  
` (back quote)  
\ (backslash)  
For example, use the following for a string that contains the special  
characters, $, ",',`and \  
For single quoting:  
No character escaping is necessary.  
A single quote cannot be used even with a backslash escaped.  
NOTE: An empty string may be specified as either "" (using double quotes) or ''  
(using single quotes).  
"?" and "? <subcommand>"  
NOTE: To use this subcommand, you must have CMC Login User privilege.  
Subcommand  
Description  
?
Displays all the subcommands you can use with the racadm  
command and a one-line description of each subcommand.  
? <subcommand>  
Displays the syntax for the specified command.  
NOTE: You can also use the help and help <subcommand> commands to obtain the  
same information.  
Synopsis  
racadm ?  
racadm ? <subcommand>  
34  
RACADM Subcommand Details  
     
Example for racadm ?  
NOTE: The following output example shows only part of the actual output for the  
racadm ? command. Descriptions shown in this example may vary slightly from the  
descriptions in your racadm session.  
racadm ?  
help  
-- list racadm subcommand description  
help <subcommand> -- display usage summary for a  
subcommand  
?
-- list racadm subcommand description  
? <subcommand> -- display usage summary for a  
subcommand  
arp  
-- display the networking arp table  
chassisaction -- execute chassis or switch power-  
up/down/cycle or KVM powercycle  
clrraclog  
clrsel  
-- clear the CMC log  
-- clear the System Event Log (SEL)  
cmcchangeover -- Changes the redundant state of the  
CMC from active to standby and vice versa  
config  
-- modify CMC configuration properties  
...  
setniccfg  
properties  
setractime  
setslotname  
chassis  
-- modify network configuration  
-- set the time on the CMC  
-- sets the name of the slot in the  
setsysinfo  
location  
sslcertview  
the CMC  
-- set the chassis name and chassis  
-- display a CA/server certificate in  
testemail  
testfeature  
testtrap  
traceroute  
traceroute6  
-- test CMC e-mail notifications  
-- test CMC feature x  
-- test CMC SNMP trap notifications  
-- determine the route of a packet  
-- determine the route of a packet  
Example for racadm ? <subcommand>  
racadm ? getsysinfo  
RACADM Subcommand Details  
35  
getsysinfo -- display general CMC and system  
information  
Usage:  
racadm getsysinfo [-d] [-c] [-A] [-4] [-6]  
-----------------------------------------------------  
------  
Valid Options:  
-d : show CMC information  
-c : show chassis information  
-A : do not show headers or labels  
-4 : show CMC IPv4 information  
-6 : show CMC IPv6 information  
"help" and "help <subcommand>"  
NOTE: To use this subcommand, you must have Login to iDRAC permission.  
Subcommand  
Description  
help  
Lists all the subcommands available to use with RACADM  
and provides a short description for each. You may also type a  
subcommand after help to get the syntax for a specific  
subcommand.  
Synopsis  
racadm help  
racadm help <subcommand>  
Output  
The racadm help command displays a complete list of subcommands.  
The racadm help <subcommand> command displays information for the  
specified subcommand only.  
36  
RACADM Subcommand Details  
     
arp  
NOTE: To use this subcommand, you must have Administrator and Execute  
Diagnostic Commands permission.  
Subcommand  
Description  
arp  
Displays the contents of the Address Resolution  
Protocol (ARP) table. ARP table entries cannot be  
added or deleted.  
Synopsis  
racadm arp  
Example  
For rack and tower servers:  
/admin1-> racadm arp  
Address  
HWtype HWaddress  
Flags Mask Iface  
10.94.161.1 ether  
00:0F:F7:2C:1C:C4 2  
eth0  
For blade servers:  
$ racadm arp  
Address  
HWtype Flags HWaddress  
Mask Device  
10.94.161.1 0x1  
0x2  
00:0F:F7:2C:1C:C4 *  
eth0  
chassisaction  
IP Address  
HW Type  
0x1  
Flags  
0x2  
HW Address  
Mask  
Device  
192.168.1.1  
00:00:0C:07:AC:0F  
*
eth0  
RACADM Subcommand Details  
37  
           
NOTE: To use this subcommand, you must have Chassis Control Administrator  
privilege.  
Subcommand  
Description  
chassisaction  
Executes a power action on the chassis, iKVM, or a  
server.  
Synopsis  
racadm chassisaction [-m <module>] <action>  
Table 2-1 describes the chassasaction subcommand  
options  
Table 2-1. chassisaction Subcommand Options  
Option  
Description  
-m  
Module on which you want to carry out the action. Values are:  
<module>  
chassis- this is the default value if -mis not specified.  
switch-nwhere =1–6  
n
kvm  
<action> Action that you want to execute on the specified module. Values are:  
powerdown— (Chassis only) Powers down the chassis.  
powerup— (Chassis only) Powers up the chassis.  
powercycle— Power cycles the module.  
nongraceshutdown— (Chassis only) Shuts down the chassis non-  
gracefully.  
reset— Performs a hard reset of the module.  
NOTE: When <module> = kvm or switch, <action> must be powercycle or reset.  
Example  
Perform a reset of switch-3.  
racadm chassisaction -m switch-3 reset  
Module power operation successful.  
38  
RACADM Subcommand Details  
 
clearasrscreen  
NOTE: To use this subcommand, you must have Clear Logs permission.  
Subcommand  
Description  
clearasrscreen  
Clears the last crash (ASR) screen that is in memory. See  
Configuring the Managed Server to Capture the Last Crash  
Screen and Disabling the Windows Automatic Reboot Option  
sections in the iDRAC6 Enterprise for Blade Servers User  
Guide.  
Synopsis  
racadm clearasrscreen  
closessn  
NOTE: To use this subcommand, you must have Administrator permission.  
Subcommand  
Description  
closessn  
Closes a communication session on the device. Use  
getssninfo to view a list of sessions that can be  
closed using this command.  
Synopsis  
racadm closessn –i <session id>  
racadm closessn -a  
racadm closessn -u <username>  
RACADM Subcommand Details  
39  
         
Table 2-2 describes the closessn subcommand options.  
Table 2-2. closessn Subcommand Options and Descriptions  
Option  
Description  
-i<session id>  
The session ID of the session to close, which can be retrieved  
using racadm getssninfo subcommand.  
NOTE: Session executing this command cannot be closed.  
-a  
Closes all sessions.  
-u <user name> Close all sessions for a particular user name.  
NOTE: -u option can be used in local RACADM only if the username  
contains upto 16 characters.  
If the user name contains more than 16 characters, use one of the  
following options to close a session:  
Local RACADM: -i option  
Remote RACADM: -u option or -i option  
Examples:  
racadm closessn -i 1234  
Closes the session 1234.  
racadm closessn –u root  
Closes all the sessions for root user.  
racadm closessn –a  
Closes all the sessions.  
40  
RACADM Subcommand Details  
 
clrraclog  
NOTE: To use this subcommand, you must have Clear Logs permission. .  
Subcommand  
Description  
clrraclog  
Removes all existing records from iDRAC6 log. A new  
single record is created to record the date and time when  
the log was cleared.  
Synopsis  
racadm clrraclog  
clrsel  
NOTE: To use this subcommand, you must have Clear Logs permission.  
Subcommand  
Description  
clrsel  
Removes all existing records from the System Event Log  
(SEL).  
Synopsis  
racadm clrsel  
RACADM Subcommand Details  
41  
           
cmcchangeover  
NOTE: To use this subcommand, you must have Administrator privilege.  
Subcommand  
Description  
cmcchangeover  
Changes the state of the CMC from active to standby, or  
vice versa, in a redundant CMC configuration. This  
subcommand is useful for remote debugging or testing  
purposes.  
NOTE: This command is valid only in redundant CMC environments. For more  
information, see the "Understanding the Redundant CMC Environment" section of  
the Dell Chassis Management Controller User Guide.  
Synopsis  
racadm cmcchangeover  
Output  
CMC failover initiated successfully.  
config  
NOTE: To use this subcommand, you must have Log In iDRAC permission.  
Subcommand  
Description  
config  
This subcommand allows you to set iDRAC6  
configuration parameters individually or to batch them as  
part of a configuration file. If the data is different, that  
iDRAC6 object is written with the new value.  
42  
RACADM Subcommand Details  
           
Synopsis  
racadm config [-c|-p] -f <filename>  
racadm config -g <groupName> -o <objectName> [-i  
<index>] <Value>  
NOTE: The configuration file retrieved using remote racadm and local racadm are  
not interoperable. The configuration file retrieved using remote racadm shows the  
index property for some of the indexed groups as read-write, for example  
cfgSSADRoleGroupIndex. For the config -f <file name>command, use  
the configuration file retrieved from the same interface. For example, for local  
racadm config -f <file name>, use the file generated from the local  
racadm command getconfig -f <file name>.  
Input  
Table 2-3 describes the config subcommand options.  
NOTE: The -f and -p options are not supported for the serial/Telnet/ssh console.  
Table 2-3. config Subcommand Options and Descriptions  
Option Description  
-f  
The -f <filename> option causes config to read the contents of the file  
specified by <filename> and configure iDRAC6. The file must contain  
data in the format specified in the section Parsing Rules in the iDRAC6  
User’s Guide available on the Dell Support website at  
dell.com/support/manuals.  
-p  
-g  
-o  
The -p, or password option, directs config to delete the password entries  
contained in the config file -f <filename> after the configuration is  
complete.  
The -g <groupName>, or group option, must be used with the -o option.  
The <groupName> specifies the group containing the object that is to be  
set.  
The -o <objectName> <Value>, or object option, must be used with the -g  
option. This option specifies the object name that is written with the string  
<value>.  
RACADM Subcommand Details  
43  
 
Table 2-3. config Subcommand Options and Descriptions (continued)  
Option Description  
-i  
The -i <index>, or index option, is valid only for indexed groups and can be  
used to specify a unique group. The <index> is a decimal integer from 1  
through n, where n can vary from 1 to maximum number of indexes a  
particular group supports. If -i <index> is not specified, a value of 1 is  
assumed for groups, which are tables that have multiple entries. The index  
is specified by the index value, not a named value.  
-c  
The -c, or check option, is used with the config subcommand and allows the  
user to parse the .cfg file to locate syntax errors. If errors are found, the line  
number and a short description of what is incorrect are displayed. Writes do  
not occur to iDRAC6. This option is a check only.  
Output  
This subcommand generates error output for any of the following reasons:  
Invalid syntax, group name, object name, index, or other invalid  
database members  
RACADM CLI failures  
This subcommand returns an indication of the number of configuration  
objects that were written out of the total objects in the .cfg file.  
Examples  
racadm config -g cfgLanNetworking -o  
cfgNicIpAddress 10.35.10.100  
Sets the cfgNicIpAddress configuration parameter (object) to the value  
10.35.10.110. This IP address object is contained in the group  
cfgLanNetworking  
.
racadm config -f myrac.cfg  
Configures or reconfigures iDRAC6. The myrac.cfg file may be created  
from the getconfig command. The myrac.cfg file may also be edited  
manually as long as the parsing rules are followed.  
NOTE: The myrac.cfg file does not contain passwords. To include passwords  
in the file, you must enter them manually. If you want to remove password  
information from the myrac.cfg file during configuration, use the -p option.  
44  
RACADM Subcommand Details  
connect  
Subcommand  
Description  
connect  
Connects to the switch or server serial console.  
NOTE: You cannot use this subcommand with remote RACADM.  
Synopsis  
racadm connect [-b] <server-n>  
racadm connect [-b] <switch-n>  
Table 2-4 describes the connect subcommand options.  
Table 2-4. connect Subcommand Options  
Option  
Description  
-b  
Connects to the switch or console using the binary  
mode. This is an optional argument; a server or a switch  
must be present.  
server-n or  
Server or switch to connect to.  
switch-n  
server-  
n
n
where  
where  
n
=1–16  
switch-  
n=<a1 | a2 | b1 | b2 | c1 | c2>  
NOTE: If you use the -b option, reset the CMC to terminate the connect operation.  
NOTE: See the Dell Chassis Management Controller User Guide for examples on  
using the connect subcommand.  
RACADM Subcommand Details  
45  
       
coredump  
NOTE: This option is applicable only for iDRAC6.  
NOTE: To use this subcommand, you must have Execute Debug Commands  
permission.  
Subcommand  
Description  
coredump  
Displays detailed information related to any recent  
critical issues that have occurred with the RAC. The  
coredump information can be used to diagnose these  
critical issues.  
If available, the coredump information is persistent across  
iDRAC6 power cycles and remains available until either  
of the following conditions occur:  
• The coredump information is cleared with the  
coredumpdelete subcommand.  
• Another critical condition occurs on the RAC. In this  
case, the coredump information is relative to the last  
critical error that occurred.  
See the coredumpdelete subcommand for more  
information about clearing the coredump.  
Synopsis  
racadm coredump  
46  
RACADM Subcommand Details  
     
coredumpdelete  
NOTE: This option is applicable only for iDRAC6.  
NOTE: To use this subcommand, you must have Clear Logs or Execute Debug  
Commands permission.  
Subcommand  
Description  
coredump  
Clears any currently resident coredump data stored in the  
RAC.  
NOTE: If a coredumpdelete command is issued and a coredump is not  
currently stored in the RAC, the command displays a success message.  
This behavior is expected.  
See the coredump subcommand for more information on viewing  
a coredump.  
Synopsis  
racadm coredumpdelete  
deploy  
NOTE: To use this subcommand, you must have Server Administrator privilege.  
Subcommand  
Description  
deploy  
Configures the static IP address, subnet mask, gateway,  
and password for the root user on iDRAC for the specified  
server.  
NOTE: You can also use setniccfg to configure static IP address, subnet mask, and  
gateway, as well as DHCP, speed, and duplex properties.  
RACADM Subcommand Details  
47  
             
Synopsis  
racadm deploy -m <module> -u root -p <password> -s  
ipaddress> <subnet> <gateway> -b <device> -o <no|yes>  
racadm deploy -m <module> -u root -p <password> -s -6  
<
<
ipv6Address> <prefixlen> <gateway> -b <device> -o <no|yes>  
NOTE: <prefixlen> must be a number between 0 and 128.  
racadm deploy -m <module> -u root -p <password> -d [-  
6]  
racadm deploy -a -u root -p <password  
>
Table 2-5 describes the deploy subcommand options.  
Table 2-5. deploy Subcommand Options  
Option  
Description  
-b <device>  
Specifies the first boot device; must be used with  
-o.  
Use with -m<module> to specify for a individual  
server, or with -afor all servers  
Legal values: device=None, PXE, HDD, CD-  
DVD, vFDD, vCD-DVD, iSCSI, SD, FDD  
-o <no|yes>  
Indicates if the server should boot from the  
device once; must be used with -o.  
Use with -m<module> to specify for a individual  
server, or with -afor all servers  
-a  
Creates and enables an iDRAC root user if it does  
not already exist, and is executed on all the  
existing servers in the chassis  
-u root  
Indicates that the <password> is supplied for the  
root user on the server. rootis a constant  
parameter, the only value that is valid with the -u  
option.  
-m <module>  
Specifies the server you want to configure.  
Legal values: server-n, where n=1–16  
-p <password>  
Specifies the password for the root user on the  
server.  
48  
RACADM Subcommand Details  
 
Table 2-5. deploy Subcommand Options (continued)  
Option  
Description  
-s <ipaddress subnet gateway>  
Sets the IP address, subnet mask, and gateway for  
the specified server, separated by single spaces.  
ipaddress — A string representing a valid IP  
address. For example, 192.168.0.20.  
subnet — A string representing a valid subnet  
mask. For example, 255.255.255.0.  
gateway — A string representing a valid gateway  
address. For example, 192.168.0.1.  
-d  
-6  
Enables DHCP for the specified server.  
NOTE: The -sand -doptions cannot be used  
together in the same command.  
Enables IPv6 auto configuration (when used with  
-d)  
Sets static IPv6 addresses (when used with -s)  
Example  
racadm deploy -m server-8 -s 192.168.0.20  
255.255.255.0 192.168.0.1  
The server was deployed successfully.  
NOTE: The deploy command generates an error when used on the extension slot  
of a multi-slot server.  
racadm deploy -m server-9 192.168.0.11  
255.255.255.0 192.168.0.1  
ERROR: Server in slot 9 is an extension of the  
server in slot 1.  
racadm deploy -m server-7 -u root -p calvin -s -6  
::/64 :: 10  
RACADM Subcommand Details  
49  
feature  
NOTE: To use this subcommand to deactivate FlexAddress, you must have Chassis  
Configuration Administrator privilege. A user with login privileges can view status  
only.  
Subcommand  
feature  
Description  
Displays all active chassis features. The information displayed  
includes feature name, date activated, and the serial number of the  
SD card used to activate the feature.  
Dell Feature Cards may contain more than one feature. After any  
feature included on a Dell Feature Card is activated on a chassis,  
any other features that may be included on that Dell Feature Card  
cannot be activated on a different chassis.  
NOTE: To deactivate FlexAddress features, the chassis must be powered off.  
Synopsis  
racadm feature -s  
racadm feature -d -c <featurename>  
racadm feature -a -c ExtendedStorage  
racadm feature -1 -c ExtendedStorage  
racadm feature -2 -c ExtendedStorage  
racadm feature -r -c ExtendedStorage  
Table 2-6. feature Subcommand Options  
Option  
-s  
Description  
Displays the status of active features.  
Deactivates feature specified in -c option.  
Activates ExtendedStorage feature.  
-d  
-a  
-1  
Configures ExtendedStorage feature for standalone use.  
Configures ExtendedStorage feature for redundant use.  
-2  
50  
RACADM Subcommand Details  
     
Table 2-6. feature Subcommand Options (continued)  
Option  
Description  
-r  
Reformats damaged/unformatted ExtendedStorage media.  
CAUTION: Using the -r switch deactivates the ExtendedStorage  
feature, if active; reformats the SD media in the active CMC cardslot;  
and may reboot the active CMC.  
-c  
<featurename> must be one of the following:  
• flexaddress (with -d)  
• flexaddressplus (with -d)  
• ExtendedStorage (with -a,-d,-1,-2, or -r)  
Example  
racadm feature -d -c flexaddress  
The feature FlexAddress is deactivated on the  
chassis successfully  
racadm feature -s  
Feature Name = FlexAddress  
Date/time Activated = 26 Apr 2010 - 10:16:48  
Feature installed from SD-card serial number =  
TEST0123456789012345678  
Feature Name = FlexAddressPlus  
Date/time Activated = 26 Apr 2010 - 10:16:48  
Feature installed from SD-card serial number =  
TEST0123456789012345678  
Feature name = ExtendedStorage (for redundant use)  
Date/time Activated = 06 May 2010 - 07:42:20  
Feature installed from SD-card serial number =  
TEST0123456789012345678  
RACADM Subcommand Details  
51  
featurecard  
NOTE: To use this subcommand, you must have Chassis Configuration  
Administrator privilege.  
Subcommand Description  
featurecard Verifies proper SD card installation and displays the SD card status.  
Table 2-7 lists the status messages returned by the command.  
Table 2-7. Status Messages Returned by featurecard -s Command  
Status Message  
Actions  
No feature card inserted.  
Check the CMC to verify that the SD card was  
properly inserted. In a redundant CMC  
configuration, make sure the CMC with the  
SD feature card installed is the active CMC  
and not the standby CMC.  
The feature card inserted is valid and No action required.  
contains the following feature(s)  
FlexAddress: The feature card is  
bound to this chassis  
No features active on the chassis  
Install the SD card into the CMC.  
The feature card inserted is valid and Remove the SD card; locate and install the SD  
contains the following feature(s)  
FlexAddress: The feature card is  
bound to another chassis,  
svctag = ABC1234, SD card  
SN = 01122334455  
card for the current chassis.  
The feature card inserted is valid and The feature card can be moved to another  
contains the following feature(s) chassis, or can be reactivated on the current  
FlexAddress: The feature card is not chassis. To reactivate on the current chassis,  
bound to any chassis  
enter racadm racresetuntil the CMC  
module with the feature card installed becomes  
active.  
52  
RACADM Subcommand Details  
       
Synopsis  
racadm featurecard -s  
Table 2-8 describes the featurecard subcommand option.  
Table 2-8. featurecard Subcommand Options  
Option  
Description  
-s  
Lists active SD card features and SD card status.  
Example  
$ racadm featurecard -s  
The feature card inserted is valid, serial number  
TEST0123456789012345678  
The feature card contains the following feature(s):  
FlexAddress: The feature is bound to this chassis  
FlexAddressPlus: The feature is bound to this  
chassis  
ExtendedStorage: The feature is bound to this  
chassis  
RACADM Subcommand Details  
53  
 
fwupdate  
NOTE: To use this subcommand for CMC you must have Chassis Configuration  
Administrator privilege and for iDRAC you must have Configure iDRAC6 permission.  
Subcommand  
fwupdate  
Description  
Allows you to update the firmware on the iKVM, active CMC,  
standby CMC, server iDRACs, or an IOM infrastructure device.  
You can:  
• Check the firmware update process status.  
• Update iDRAC6 or CMC firmware from a TFTP server by  
providing an IP address and optional path.  
• Update iDRAC6 or CMC firmware from the local file system  
using local RACADM.  
• Rollback to the standby firmware.  
Table 2-9 describes the fwupdate subcommand options.  
Table 2-9. fwupdate Subcommand Options  
Option  
Description  
-s  
Lists active SD card features and SD card status.  
NOTE: This subcommand performs updates to the iDRAC firmware (if CMC  
firmware version is 2.0 or later and iDRAC firmware version is 1.4) when the existing  
firmware is corrupted. There can only be a single update operation in progress at  
any time. In addition, the fwupdate subcommand may only update one or more  
devices of a single kind at a time.  
Before you begin your firmware update, see the Advanced iDRAC6  
Configuration section in the iDRAC6 User’s Guide available on the Dell  
Support website at dell.com/support/manuals.  
NOTE: Running the fwupdate subcommand to update the firmware on the active  
CMC resets itself causing all network connections to be dropped. During update of  
all other modules, including the standby CMC, the active CMC continues to run  
normally without resetting.  
54  
RACADM Subcommand Details  
       
Table 2-10 describes the firmware update method supported for each  
interface.  
Table 2-10. Firmware Update Matrix  
FW Update Method  
Monolithic Modular  
CMC  
Local RACADM  
Local RACADM - TFTP  
Remote RACADM  
Remote RACADM-TFTP  
Remote RACADM-FTP  
Firmware RACADM-TFTP  
Firmware RACADM-FTP  
Synopsis for iDRAC6  
racadm fwupdate -s  
racadm fwupdate -g -u -a <TFTP_Server_IP_Address> [-d  
<path>]  
racadm fwupdate -r  
racadm fwupdate -p -u [-d <path>]  
Synopsis for CMC  
For local RACADM:  
racadm fwupdate -g -u -a <tftp server ip address or  
FQDN> -d <path> [-m <module>]  
racadm fwupdate -f <ftp server ip address or FQDN>  
<username> <password> -d <path> [-m <module>]  
racadm fwupdate -u -m iominf-<n>  
racadm fwupdate -s [-m <module>]  
racadm fwupdate -c [-m <module>]  
RACADM Subcommand Details  
55  
 
For remote RACADM:  
racadm fwupdate -p -u -d <firmware image>  
NOTE: When using FTP, if you provide the full path to the image file on the CLI, then  
the CMC uses that path to locate that file on the host. If you do not provide a full  
path, then the CMC searches the home directory of the specified user for the file if  
the host system is running Linux or another variant of UNIX. If the host system is  
running Windows, then a default folder, such as C:\ftproot is searched.  
NOTE: When attempting to run firmware update task using "racadm fwupdate"  
command, if the firmware image path length is greater than 64 characters, remote  
RACADM client exits with the error message "ERROR: Specified path is too long".  
Input  
Table 2-11 describes the fwupdate subcommand options.  
NOTE: The -p option is supported on local and remote RACADM and is not  
supported with the serial/Telnet/ssh console. The -p option is also not supported on  
Linux operating systems.  
Table 2-11 describes the fwupdate subcommand options.  
Table 2-11. fwupdate Subcommand Options  
Option Description  
-u  
For iDRAC: The update option performs a checksum of the firmware update file  
and starts the actual update process. This option may be used along with the -g  
or -p options. At the end of the update, iDRAC6 performs a soft reset.  
For CMC: Performs the firmware update operation.  
-s  
For iDRAC: The status option returns the current status of where you are in  
the update process. This option is always used by itself.  
For CMC: Displays the current status of the firmware update.  
NOTE: Use -mto display the status of the module update. Omit -mto display  
the status of the active CMC update.  
NOTE: The all value can only be used to obtain the status of all targets to be  
updated.  
56  
RACADM Subcommand Details  
 
Table 2-11. fwupdate Subcommand Options (continued)  
Option Description  
-g  
The get option instructs the firmware to get the firmware update file from  
the TFTP server. You must also specify the -a, -u, and -d options. In the  
absence of the -a option, the defaults are read from properties contained in  
the group cfgRemoteHosts, using properties cfgRhostsFwUpdateIpAddr  
and cfgRhostsFwUpdatePath.  
For CMC: Downloads the firmware update using the TFTP server.  
-a  
The IP Address option specifies the TFTP server IP address, used with -g  
option.  
For CMC: Specifies the TFTP server IP address or FQDN used for the  
firmware image (used with -g).  
-d  
For iDRAC: The -d, or directory, option specifies the directory on the TFTP  
server or on iDRAC6’s host server where the firmware update file resides.  
For CMC: Specifies the source path where the firmware image resides.  
Default: Designated TFTP default directory on that host for the file if -g  
option is absent. If -g is used, defaults to directory configured on the TFTP  
server.  
-p  
For iDRAC: The -p, or put, option is used to update the firmware file from  
the managed system to iDRAC6. The -u option must be used with the -p  
option.  
NOTE: This option is not applicable for CMC.  
-r  
The rollback option is used to rollback to the standby firmware.  
NOTE: This option is not applicable for CMC.  
-c  
Cancels the current firmware update of a module.  
NOTE: This option is applicable only for CMC.  
RACADM Subcommand Details  
57  
Table 2-11. fwupdate Subcommand Options (continued)  
Option Description  
-m  
NOTE: This option is applicable only for CMC.  
<modul  
e>  
Specifies the module or device to be updated. <module> is one of the  
following values:  
cmc-active(default)  
cmc-standby  
kvm  
server-nwhere  
server-generationwhere generation = iDRAC or iDRAC6  
iominf-nwhere = 1–6  
n
= 1–16  
n
NOTE: CMC version 3.00 accepts IPv4, IPv6, or fully qualified domain names  
(FQDN) for both FTP and TFTP servers.  
NOTE: You can specify the cmc-activeand cmc-standbymodules at  
the same time along with one or more server-nmodules. This enables the  
devices to be updated together.  
NOTE: See "Updating the IOM Infrastructure Device Firmware" section of the  
"Using the CMC Web Interface" chapter of the Dell Chassis Management  
Controller User Guide for additional information on the IOM infrastructure  
device firmware update process.  
When you use the server-generationoption, the CMC updates all  
iDRACs of that particular generation that can be updated.  
NOTE: Verify that the update applied to servers for a particular generation has  
been validated for all impacted server models.  
Examples for CMC  
Upload the firmware image from the TFTP server and start the firmware  
update.  
racadm fwupdate -g -u -a 192.168.0.100 -d  
firmimg.cmc -m cmc-active  
TFTP firmware update has been initiated. This  
update process may take several minutes to  
complete.  
58  
RACADM Subcommand Details  
Upload the firmware image from the FTP server and start the firmware  
update.  
racadm fwupdate -f 192.168.0.100 fred password123  
-d firmimg.cmc -m cmc-active  
Start IOM infrastructure firmware update.  
racadm fwupdate -u -m iominf-1  
Update firmware on both the CMCs.  
racadm fwupdate -g -u -a 192.168.0.100 -d  
firmimg.cmc -m cmc-active -m cmc-standby  
Update firmware on multiple servers.  
racadm fwupdate -g -u -a 192.168.0.100 -d  
firmimg.imc -m server-1 -m server-2 -m server-3  
Update firmware on servers of iDRAC6 generation.  
racadm fwupdate -g -u -a 192.168.0.100 -d  
firmimg.imc -m server-idrac6  
Update firmware on multiple IOM infrastructures.  
racadm fwupdate -u -m iominf-4 -m iominf-5 -m  
iominf-6  
Query the current status of all firmware targets to be updated.  
racadm fwupdate -s -m all  
RACADM Subcommand Details  
59  
Query the current status of the firmware update process for a particular  
module.  
racadm fwupdate -s -m <module>  
Cancel a firmware update in progress.  
racadm fwupdate -c  
Upload a firmware image from the client and start the firmware update.  
racadm fwupdate -p -u -d firmimg.cmc  
NOTE: The fwupdate command generates an error when used on the extension  
slot of a multi-slot server.  
NOTE: Image path length for Remote RACADM is 256 characters and for local  
RACADM, it is 64 characters.  
Output  
Displays a message indicating the operation that is being performed.  
Examples  
racadm fwupdate -g -u - a 143.166.154.143 -d  
<path>  
In this example, the -g option tells the firmware to download the firmware  
update file from a location (specified by the -d option) on the TFTP server  
at a specific IP address (specified by the -a option). After the image file is  
downloaded from the TFTP server, the update process begins. When  
completed, iDRAC6 is reset.  
racadm fwupdate -s  
This option reads the current status of the firmware update.  
NOTE: Firmware update from local racadm (using -p -u -d options) is not supported  
on linux OS.  
NOTE: For CMC, these commands specifically apply to an active-CMC update.  
60  
RACADM Subcommand Details  
getassettag  
NOTE: To use this subcommand, you must have CMC Login User privilege.  
Subcommand  
Description  
getassettag  
Displays the asset tag for the chassis.  
Synopsis  
racadm getassettag [-m <module>]  
Table 2-12 describes the getassettag subcommand options.  
Table 2-12. getassettag Subcommand Options  
Option  
Description  
-m<module> Specifies the module whose asset tag you want to view.  
Legal value: chassis  
Example  
racadm getassettag -m chassis  
or  
racadm getassettag  
chassis 78373839–33  
getchassisname  
NOTE: To use this subcommand, you must have CMC Login User privilege.  
Subcommand  
Description  
getchassisname Displays the name of the chassis.  
Synopsis  
racadm getchassisname  
RACADM Subcommand Details  
61  
             
Example  
racadm getchassisname  
PowerEdge 2955  
getconfig  
Subcommand  
Description  
getconfig  
Retrieves iDRAC6 configuration parameters individually, or all  
iDRAC6 configuration groups may be retrieved and saved to a file.  
Synopsis  
racadm getconfig -f <filename>  
racadm getconfig -g <groupName> [-i <index>]  
racadm getconfig -u <username>  
racadm getconfig -h  
racadm getconfig -g <groupName> -o <objectName> [-i  
index]  
Input  
Table 2-13 describes the getconfig subcommand options.  
Table 2-13. getconfig Subcommand Options  
Option Description  
-f  
The -f <filename> option directs getconfig to write the entire iDRAC6  
configuration to a configuration file. This file can be used for batch  
configuration operations using the config subcommand.  
-g  
-h  
The -g <groupName>, or group option, can be used to display the  
configuration for a single group. The groupName is the name for the group  
used in the racadm.cfg files. If the group is an indexed group, use the -i option.  
The -h, or help option, displays a list of all available configuration groups in  
alphabetical order. This option is useful when you do not remember exact  
group names.  
62  
RACADM Subcommand Details  
       
Table 2-13. getconfig Subcommand Options  
Option Description  
-i  
The -i <index>, or index option, is valid only for indexed groups and can be  
used to specify a unique group. The <index> is a decimal integer from 1  
through n, where n can vary from 1 to maximum number of indexes a  
particular group supports. If -i <index> is not specified, a value of 1 is  
assumed for groups, which are tables that have multiple entries. The index is  
specified by the index value, not a named value.  
-o  
-u  
The -o <objectname> or object option specifies the object name that is used  
in the query. This option is optional and can be used with the -g option.  
The -u <username>, or user name option, can be used to display the  
configuration for the specified user. The <username> option is the login  
name for the user.  
-v  
The -v option displays additional details with the display of the properties and  
is used with the -g option.  
Output  
This subcommand generates error output upon encountering either of the  
following:  
Invalid syntax, group name, object name, index, or other invalid database  
members  
RACADM CLI transport failures  
If errors are not encountered, this subcommand displays the contents of the  
specified configuration.  
Examples  
racadm getconfig -g cfgLanNetworking  
Displays all of the configuration properties (objects) that are contained in  
the group cfgLanNetworking  
.
racadm getconfig -f myrac.cfg  
Saves all group configuration objects from iDRAC6 to myrac.cfg  
.
RACADM Subcommand Details  
63  
racadm getconfig -h  
Displays a list of the available configuration groups on iDRAC6 in an  
alphabetical order.  
racadm getconfig -u root  
Displays the configuration properties for the user named root.  
racadm getconfig -g cfgUserAdmin -i 2 -v  
Displays the user group instance at index 2 with verbose information for  
the property values.  
getdcinfo  
NOTE: To use this subcommand, you must have CMC Login User privilege.  
Subcommand  
Description  
getdcinfo  
Displays general I/O module and daughter card configuration  
information.  
NOTE: Fabric verification for server DCs is performed only when the chassis is  
powered on. When the chassis is on standby power, iDRACs on the server modules  
remain powered off and thus are unable to report the server's DC fabric type. The  
DC fabric type may not be reported in the CMC user interface until iDRAC on the  
server is powered on.  
Synopsis  
racadm getdcinfo  
Table 2-14 describes the getdcinfo subcommand options.  
Table 2-14. getdcinfo Subcommand Options  
Option  
Description  
-n  
Displays the model names for the daughter cards in servers.  
64  
RACADM Subcommand Details  
       
Example  
The example output below is for a system with multi-slot servers.  
racadm getdcinfo  
Group A I/O Type : Gigabit Ethernet  
Group B I/O Type : Gigabit Ethernet  
Group C I/O Type : Gigabit Ethernet  
<IO#>  
<Type>  
<State>  
OK  
<Role>  
Master  
N/A  
switch-1  
switch-2  
switch-3  
switch-4  
switch-5  
switch-6  
Gigabit Ethernet  
None  
N/A  
OK  
Gigabit Ethernet  
None  
Master  
N/A  
N/A  
OK  
Gigabit Ethernet  
None  
Member  
N/A  
N/A  
<Server#>  
<Presence>  
<DC1 Type>  
<DC1  
<DC2 Type>  
<DC2  
State>  
State>  
server-1  
server-2  
server-3  
server-4  
Present  
None  
None  
None  
None  
N/A  
None  
None  
None  
N/A  
N/A  
N/A  
OK  
Not Present  
Not Present  
Present  
N/A  
N/A  
N/A  
Gigabit  
Ethernet  
server-5  
server-6  
server-7  
server-8  
server-9  
server-10  
server-11  
server-12  
server-13  
server-14  
server-15  
server-16  
Not Present  
Not Present  
Not Present  
Present  
None  
None  
None  
N/A  
N/A  
N/A  
None  
None  
None  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
FibreChannel 4 Invalid None  
Extension(1) None  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
None  
None  
None  
None  
None  
None  
None  
None  
Not Present  
Not Present  
Not Present  
Not Present  
Not Present  
Not Present  
Not Present  
None  
None  
None  
None  
None  
None  
None  
RACADM Subcommand Details  
65  
getdcinfo -n  
<Server#>  
server-1  
server-2  
server-3  
server-4  
server-5  
server-6  
server-7  
server-8  
server-9  
server-10  
server-11  
server-12  
server-13  
server-14  
server-15  
server-16  
<Presence>  
<DC1 Model Name>  
<DC2 Model Name>  
Present  
None  
None  
Not Present  
Not Present  
Present  
None  
None  
None  
None  
None  
Broadcom M5708t  
None  
Not Present  
Not Present  
Not Present  
Present  
None  
None  
None  
None  
None  
LPe1105-M4  
None  
Extension(1) None  
None  
Not Present  
Not Present  
Not Present  
Not Present  
Not Present  
Not Present  
Not Present  
None  
None  
None  
None  
None  
None  
None  
None  
None  
None  
None  
None  
None  
None  
getflexaddr  
NOTE: To use this subcommand, you must have CMC Login User privilege.  
Subcommand  
getflexaddr  
Description  
Displays enabled/disabled status for the entire chassis. If used with  
-i, the command displays MACs/WWN on a per slot basis.  
NOTE: If FlexAddress is not activated on the chassis, the command displays  
server-assigned MAC/WWN addresses. If the slot is empty, the command leaves  
the server-assigned MAC/WWN addresses blank. If an external console controls  
the MAC/WWN addresses, the command displays an externally managed message.  
Synopsis  
racadm getflexaddr [-i <slotNum>]  
66  
RACADM Subcommand Details  
     
Table 2-15 describes the getflexaddr subcommand options.  
Table 2-15. getflexaddr Subcommand Options  
Option  
Description  
-i <slotNum> Specifies the slot information to be displayed. <slotNum> can be  
from 1 to 16.  
Example  
Display current flex address settings for all slots and fabrics  
racadm getflexaddr  
<Slot#> <Status> <Server Presence>  
1
Enabled Present  
2
Enabled Present  
3
Enabled Not Present  
Enabled Not Present  
Enabled Present  
4
5
6
Enabled Not Present  
Enabled Not Present  
Enabled Not Present  
Enabled Not Present  
Enabled Extension(2)  
Enabled Not Present  
Enabled Not Present  
Enabled Extension(5)  
Enabled Not Present  
Enabled Not Present  
Enabled Not Present  
7
8
9
10  
11  
12  
13  
14  
15  
16  
RACADM Subcommand Details  
67  
 
<Fabric> <Type>  
<Status>  
A
B
C
Gigabit Ethernet Enabled  
None  
None  
Enabled  
Enabled  
idrac Management Controller Disabled  
Display the current flex address setting for slot 1.  
racadm getflexaddr -i 1  
Slot-1 server presence = Present  
Slot-1 flexaddress enabled = 1  
<Fabric> <Type>  
<Server-Assigned> <Chassis-Assigned>  
slot1-A1 Gigabit  
Ethernet  
00:1C:23:CD:AC:D2 00:1E:C9:FF:E3:21  
(active)  
iSCSI  
00:1C:23:CD:AC:D3 00:1E:C9:FF:E3:22  
(active)  
slot1-A2 Gigabit  
Ethernet  
00:1C:23:CD:AC:D4 00:1E:C9:FF:E3:23  
(active)  
iSCSI  
00:1C:23:CD:AC:D5 00:1E:C9:FF:E3:24  
(active)  
slot1-B1 Gigabit  
Ethernet  
00:1D:09:71:B3:60 00:1E:C9:FF:E3:25(active)  
iSCSI  
00:1D:09:71:B3:61 00:1E:C9:FF:E3:26(active)  
00:1D:09:71:B3:62 00:1E:C9:FF:E3:27(active)  
slot1-B2 Gigabit  
Ethernet  
iSCSI  
00:1D:09:71:B3:63 00:1E:C9:FF:E3:28(active)  
slot1-C1 Fiber  
Channel 4  
10:00:00:00:C9:63 20:01:00:1E:C9:FF:E3:29(active)  
:51:0E  
slot1-C2 Fiber  
Channel 4  
10:00:00:00:C9:63 20:02:00:1E:C9:FF:E3:29(active)  
:51:0D  
68  
RACADM Subcommand Details  
getfanreqinfo  
NOTE: To use this subcommand, you must have CMC Login User privilege.  
Subcommand  
Description  
getfanreqinfo  
Displays fan request for Servers and Switches in percent (%).  
Synopsis  
racadm getfanreqinfo  
Example  
racadm getfanreqinfo  
[Ambient Temperature Fan Request %]  
38  
[Server Module Fan Request Table]  
<Slot#> <Server  
Name>  
<Blade Type>  
<Power  
State>  
<Presence> <Fan  
Request%>  
1
SLOT-01  
SLOT-02  
SLOT-03  
SLOT-04  
SLOT-05  
SLOT-06  
SLOT-07  
PowerEdgeM600 ON  
PowerEdgeM905 ON  
PowerEdgeM710 ON  
PowerEdgeM610 ON  
PowerEdgeM610 ON  
Present  
Present  
Present  
Present  
Present  
33  
2
35  
44  
46  
46  
3
4
5
6
N/A  
N/A  
Not Present N/A  
7
PowerEdgeM605 ON  
Present  
100  
fwupdate  
8
SLOT-08  
SLOT-09  
SLOT-10  
PowerEdgeM710 ON  
Present  
44  
9
N/A  
N/A  
N/A  
Not Present N/A  
10  
Extension N/A  
N/A  
(2)  
11  
SLOT-11  
N/A  
Extension N/A  
(3)  
N/A  
RACADM Subcommand Details  
69  
   
12  
13  
14  
15  
16  
SLOT-12  
SLOT-13  
SLOT-14  
SLOT-15  
SLOT-16  
N/A  
N/A  
N/A  
N/A  
Not Present N/A  
Not Present N/A  
PowerEdgeM600 ON  
Present  
33  
N/A  
N/A  
N/A  
Not Present N/A  
Extension N/A  
N/A  
(8)  
[Switch Module Fan Request Table]  
<Slot#> <Server  
Name>  
<Blade Type>  
<Power  
State>  
<Presence> <Fan  
Request%>  
1
SLOT-01  
SLOT-02  
SLOT-03  
SLOT-04  
SLOT-05  
SLOT-06  
SLOT-07  
PowerEdgeM600 ON  
PowerEdgeM905 ON  
PowerEdgeM710 ON  
PowerEdgeM610 ON  
PowerEdgeM610 ON  
Present  
Present  
Present  
Present  
Present  
33  
2
35  
44  
46  
46  
3
4
5
6
N/A  
N/A  
Not Present N/A  
7
PowerEdgeM605 ON  
Present  
100  
44  
fwupdate  
8
SLOT-08  
SLOT-09  
SLOT-10  
PowerEdgeM710 ON  
Present  
9
N/A  
N/A  
N/A  
Not Present N/A  
10  
Extension N/A  
N/A  
(2)  
11  
SLOT-11  
N/A  
Extension N/A  
(3)  
N/A  
12  
13  
14  
15  
16  
SLOT-12  
SLOT-13  
SLOT-14  
SLOT-15  
SLOT-16  
N/A  
N/A  
N/A  
N/A  
Not Present N/A  
Not Present N/A  
PowerEdgeM600 ON  
Present  
Not Present N/A  
Extension N/A N/A  
(8)  
33  
N/A  
N/A  
N/A  
70  
RACADM Subcommand Details  
[Switch Module Fan Request Table]  
<IO  
Name>  
<Name>  
<Type>  
<Presence> <Fan  
Request%>  
Switch-1 Dell Ethernet Pass- Gigabit  
Present  
Present  
30  
Through  
Ethernet  
Switch-2 Dell PowerConnect  
M6220  
Gigabit  
Ethernet  
30  
Switch-3 N/A  
Switch-4 N/A  
Switch-5 N/A  
Switch-6 N/A  
None  
None  
None  
None  
Not Present N/A  
NotPresent N/A  
Not Present N/A  
Not Present N/A  
getioinfo  
NOTE: To use this subcommand, you must have CMC Login User privilege.  
Subcommand  
getioinfo  
Description  
Displays general information about the I/O modules on the chassis.  
NOTE: The fabric type may be any supported I/O fabric type, such as Ethernet,  
Fiber Channel, and Infiniband.  
Synopsis  
racadm getioinfo  
RACADM Subcommand Details  
71  
     
Example  
racadm getioinfo  
<IO>  
<Name>  
<Type>  
<Presence> <POST>  
Present OK  
<Power> <Role>  
switch-1  
DellEthernet Gigabit  
ON  
Master  
Passthrough  
N/A  
Ethernet  
None  
switch-2  
switch-3  
Not Present N/A  
Present OK  
N/A  
ON  
N/A  
Brocade 4424 Fibre  
Channel 4  
Master  
switch-4  
switch-5  
switch-6  
N/A  
N/A  
N/A  
None  
Not Present N/A  
Not Present N/A  
Not Present N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
None  
None  
getkvminfo  
NOTE: To use this subcommand, you must have CMC Login User privilege.  
Subcommand  
Description  
getkvminfo  
Displays iKVM module information.  
Synopsis  
racadm getkvminfo  
Example  
racadm getkvminfo  
<module> <presence>  
<model>  
Avocent iKVM Switch  
<FW Version> <status>  
00.05.00.04 Ready  
KVM  
Present  
72  
RACADM Subcommand Details  
     
getled  
NOTE: To use this subcommand, you must have CMC Login User privilege.  
Subcommand  
Description  
getled  
Displays the LED settings on a module: blinking, not blinking, or  
unknown (for empty slots).  
Synopsis  
racadm getled -m <module>  
Table 2-16 describes the getled subcommand options.  
Table 2-16. getled Subcommand Options  
Option  
Description  
-m <module>  
Specifies the module whose LED settings you want to view.  
<module> can be one of the following:  
server-nwhere  
n
=1–16  
switch-nwhere  
n
=1–6  
chassis  
cmc-active  
Examples  
racadm getled -m server-10  
<module>  
server-10  
<LED state>  
Blinking  
racadm getled -m chassis  
<module>  
server-10  
<LED state>  
Not blinking  
racadm getled -m server-1  
<module>  
server-1  
<LED state>  
ON  
RACADM Subcommand Details  
73  
       
racadm getled -m server-9  
<module>  
server-9  
<LED state>  
Extension(1)  
getmacaddress  
NOTE: To use this subcommand, you must have CMC Login User privilege.  
Subcommand  
Description  
getmacaddress Displays the MAC/WWN addresses for all modules or for a  
specified module.  
Synopsis  
racadm getmacaddress [-m <module>] [-t iscsi] [-x]  
racadm getmacaddress [-a]  
Table 2-17 describes the getmacaddress subcommand options.  
Table 2-17. getmacaddress Subcommand Options  
Option  
Description  
-m<module> Specifies the module whose MAC address you want to view.  
<module> may be one of the following:  
chassis  
server-n where n=1–16  
switch-n where =1–6  
n
-t  
Displays the iSCSI MAC addresses for all servers or the specified  
server if used with -m option.  
-x  
Displays the extra MACs (Ethernet or iSCSI) for servers with  
additional LOM MACs and must be used with -m option.  
-a  
Displays the Ethernet and iSCSI MAC/WWN addresses for all  
iDRAC/LOMs/mezzanine cards. When FlexAddress is enabled for a  
particular slot, then the chassis-assigned MAC/WWN address is  
displayed.  
74  
RACADM Subcommand Details  
       
Example  
Display iSCSI MAC addresses for all servers.  
racadm getmacaddress -t iscsi  
Display iSCSI MAC for server-1.  
racadm getmacaddress -m server-1 -t iscsi  
Display extra iSCSI MACs for server-1 (if available).  
racadm getmacaddress -m server-1 -t iscsi -x  
Display MAC for server-1.  
racadm getmacaddress -m server-1  
<Name>  
<Presence>  
<BMC MAC Address> <NIC1 MAC  
Address>  
<NIC2 MAC  
Address>  
server-1 Present  
00:11:43:FD:B7:2A 00:11:43:FD:B7: 00:11:43:FD:B7:2B  
2A  
server-9 Extension(1) N/A  
00:11:43:FD:B7: 00:11:43:FD:B7:2D  
2C  
Display extra MACs for server-1 (if available).  
racadm getmacaddress -m server-1 -x  
<Name>  
<Presence>  
<BMC MAC Address> <NIC1 MAC  
Address>  
<NIC2 MAC  
Address>  
server-1 Present  
00:11:43:FD:B7:2A 00:11:43:FD:B7: 00:11:43:FD:B7:2B  
2A  
00:11:43:FD:B7: 00:11:43:FD:B7:2D  
2C  
racadm getmacaddress  
<Name>  
CMC  
<Presence>  
Present  
<BMC MAC Address> <NIC1 MAC  
Address>  
<NIC2 MAC  
Address>  
N/A  
00:1E:4F:1F:3C N/A  
:58  
Server-1  
Server-2  
Present  
00:1E:4F:2A:AF:7B 00:1E:4F:2A:D3 00:1E:4F:2A:D3:99  
:97  
Present  
00:22:19:D2:1E:84 N/A  
N/A  
RACADM Subcommand Details  
75  
Server-3  
Server-4  
Not Present N/A  
N/A  
N/A  
Present  
00:18:8B:FF:45:2A 00:18:8B:FF:AA 00:18:8B:FF:AA:04  
:02  
Server-5  
Present  
00:19:B9:FF:FE:E2 00:19:B9:FF:FC 00:19:B9:FF:FC:0E  
:0C  
Server-6  
Server-7  
Present  
Present  
00:22:19:D2:1D:D4 N/A  
N/A  
00:1E:4F:FF:FC:DC 00:1E:4F:FF:F0 00:1E:4F:FF:F0:B2  
:B0  
Server-8  
Server-9  
Not Present N/A  
Not Present N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
Server-10 Not Present N/A  
Server-11 Not Present N/A  
Server-12 Not Present N/A  
Server-13 Present  
00:18:8B:FF:45:26 00:18:8B:FF:A9 00:18:8B:FF:A9:F4  
:F2  
Server-14 Present  
00:22:19:D2:1E:A2 N/A  
N/A  
Server-15 Extension(7) N/A  
00:1E:4F:FF:F0 00:1E:4F:FF:F0:B6  
:B4  
Server-16 Not Present N/A  
N/A  
N/A  
Switch-1  
Switch-2  
Switch-3  
Switch-4  
Switch-5  
Switch-6  
Present  
Present  
Present  
Present  
Present  
N/A  
N/A  
N/A  
N/A  
N/A  
00:00:00:00:00 N/A  
:00  
00:00:00:00:00 N/A  
:00  
00:00:00:00:00 N/A  
:00  
00:00:00:00:00 N/A  
:00  
00:05:1E:08:EB N/A  
:0B  
Not Present N/A  
N/A  
N/A  
Display Ethernet and iSCSI MACS of all LOMs/mezzanine cards.  
racadm getmacaddress -a  
<Name>  
CMC  
<Type>  
N/A  
<Presence>  
Present  
<BMC MAC  
Address>  
<NIC1 MAC  
Address>  
<NIC2 MAC  
Address>  
N/A  
00:1E:4F:1F:3 N/A  
C:58  
76  
RACADM Subcommand Details  
Server-1- Gigabit  
Present  
Present  
Present  
Present  
Present  
Present  
00:1E:4F:2A: 00:1E:4F:2A:D 00:1E:4F:2A  
AF:7B 3:97 :D3:99  
A
Ethernet  
iSCSI  
00:1E:4F:2A:D 00:1E:4F:2A  
3:98 :D3:9A  
Server-1- Gigabit  
Not Installed Not  
Installed  
B
Ethernet  
iSCSI  
Not Installed Not  
Installed  
Server-1- Fibre  
Not Installed Not  
Installed  
C
Channel 4  
Server-2- Gigabit  
00:22:19:D2: N/A  
1E:84  
N/A  
A
Ethernet  
iSCSI  
Present  
Present  
N/A  
N/A  
Server-2- Gigabit  
Not Installed Not  
Installed  
B
Ethernet  
iSCSI  
Present  
Not Installed Not  
Installed  
Server-2- Fibre  
Present  
Not Installed Not  
Installed  
C
Channel 4  
Server-3  
N/A  
Not Present N/A  
N/A  
N/A  
Server-4- Gigabit  
Present  
Present  
Not Present  
Present  
Present  
Present  
Present  
Present  
Present  
Present  
00:18:8B:FF: 00:18:8B:FF:A 00:18:8B:FF  
45:2A A:02 :AA:04  
A
Ethernet  
iSCSI  
00:18:8B:FF:A 00:18:8B:FF  
A:03 :AA:05  
Server-4- Gigabit  
Not Installed Not  
Installed  
B
Ethernet  
iSCSI  
Not Installed Not  
Installed  
Server-4- Fibre  
Not Installed Not  
Installed  
C
Channel 4  
Server-5- Gigabit  
00:19:B9:FF: 00:19:B9:FF:F 00:19:B9:FF  
FE:E2 C:0C :FC:0E  
A
Ethernet  
iSCSI  
00:19:B9:FF:F 00:19:B9:FF  
C:0D :FC:0F  
Server-5- Gigabit  
Not Installed Not  
Installed  
B
Ethernet  
iSCSI  
Not Installed Not  
Installed  
Server-5- Fibre  
Channel 4  
Not Installed Not  
Installed  
C
RACADM Subcommand Details  
77  
Server-6- Gigabit  
Present  
00:22:19:D2: N/A  
1D:D4  
N/A  
N/A  
A
Ethernet  
iSCSI  
Present  
Present  
N/A  
Server-6- Gigabit  
Not Installed Not  
Installed  
B
Ethernet  
iSCSI  
Present  
Present  
Present  
Present  
Present  
Present  
Not Installed Not  
Installed  
Server-6- Fibre  
Not Installed Not  
Installed  
C
Channel 4  
Server-7- Gigabit  
00:1E:4F:FF: 00:1E:4F:FF:F 00:1E:4F:FF  
FC:DC 0:B0 :F0:B2  
A
Ethernet  
iSCSI  
00:1E:4F:FF:F 00:1E:4F:FF  
0:B1 :F0:B3  
Server-7- Gigabit  
Ethernet  
00:1D:09:72:0 00:1D:09:72  
1:C8 :01:CA  
B
Server-7- Fibre  
21:00:00:1B:3 21:01:00:1B  
C
Channel 4  
2:0E:CF:34  
:32:2E:CF:3  
4
Server-8  
Server-9  
N/A  
N/A  
Not Present N/A  
Not Present N/A  
Not Present N/A  
Not Present N/A  
Not Present N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
Server-10 N/A  
Server-11 N/A  
Server-12 N/A  
Server-  
13-A  
Gigabit  
Ethernet  
Present  
Present  
Present  
Present  
Present  
00:18:8B:FF: 00:18:8B:FF:A 00:18:8B:FF  
45:26 9:F2 :A9:F4  
iSCSI  
00:18:8B:FF:A 00:18:8B:FF  
9:F3 :A9:F5  
Server-  
13-B  
Gigabit  
Ethernet  
00:1D:09:71:E 00:1D:09:71  
0:78 :E0:7A  
iSCSI  
00:1D:09:71:E 00:1D:09:71  
0:79 :E0:7B  
Server-  
13-C  
Fibre  
Channel 4  
21:00:00:1B:3 21:01:00:1B  
2:0E:EF:30  
:32:2E:EF:3  
0
Server-  
14-A  
Gigabit  
Ethernet  
Present  
00:22:19:D2: N/A  
1E:A2  
N/A  
iSCSI  
Present  
Present  
N/A  
N/A  
Server-  
14-B  
Gigabit  
Ethernet  
Not Installed Not  
Installed  
iSCSI  
Present  
Not Installed Not  
Installed  
78  
RACADM Subcommand Details  
Server-  
14-C  
Fibre  
Channel 4  
Present  
Not Installed Not  
Installed  
Server-  
15-A  
Gigabit  
Ethernet  
Extension(7) N/A  
Extension(7) N/A  
Extension(7) N/A  
Extension(7) N/A  
Extension(7) N/A  
00:1E:4F:FF:F 00:1E:4F:FF  
0:B4 :F0:B6  
iSCSI  
00:1E:4F:FF:F 00:1E:4F:FF  
0:B5 :F0:B7  
Server-  
15-B  
Gigabit  
Ethernet  
00:1D:09:71:E 00:1D:09:71  
1:20 :E1:22  
iSCSI  
00:1D:09:71:E 00:1D:09:71  
1:21 :E1:23  
Server-  
15-C  
Fibre  
Channel 4  
21:00:00:1B:3 21:00:00:1B  
2:17:3A:66  
:32:37:3A:6  
6
Server-16 N/A  
Not Present N/A  
N/A  
N/A  
Switch-1  
Switch-2  
Switch-3  
Switch-4  
Switch-5  
Switch-6  
None  
None  
None  
None  
None  
N/A  
Present  
Present  
Present  
Present  
Present  
N/A  
N/A  
N/A  
N/A  
N/A  
00:00:00:00:0 N/A  
0:00  
00:00:00:00:0 N/A  
0:00  
00:00:00:00:0 N/A  
0:00  
00:00:00:00:0 N/A  
0:00  
00:05:1E:08:E N/A  
B:0B  
Not Present N/A  
N/A  
N/A  
getmodinfo  
NOTE: To use this subcommand, you must have CMC Login User privilege.  
NOTE: The service tag field is blank for modules that do not have service tags.  
Subcommand  
Description  
getmodinfo  
Displays configuration and status information for all modules or a  
specified module (server, switch, CMC, fan unit, power supply  
unit, KVM, or I2C cable) in the chassis.  
Synopsis  
racadm getmodinfo [-m <module>] [-A]  
RACADM Subcommand Details  
79  
     
Table 2-18 describes the getmodinfo subcommand options.  
Table 2-18. getmodinfo Subcommand Options  
Option  
Description  
-m <module>  
Specifies the module whose configuration and status information  
you want to view. The default command (no options) displays  
information about all major components in the chassis.  
<module> may be any of the following values:  
server-n where  
switch-nwhere  
n
=
1–16  
n=  
1–6  
CMC-nwhere  
n
=
1–2  
1–9  
fan-nwhere  
n=  
ps-nwhere  
n=1–6  
• chassis  
kvm  
io-cable  
fpc-cable  
-A  
Suppresses headers and labels in the output.  
Example  
racadm getmodinfo -m switch-1  
<module>  
Switch-1  
<presence>  
Present  
<pwrState>  
ON  
<health>  
OK  
<svcTag>  
CG09074  
racadm getmodinfo  
<module>  
Chassis  
Fan-1  
Fan-2  
Fan-3  
Fan-4  
Fan-5  
Fan-6  
Fan-7  
Fan-8  
Fan-9  
PS-1  
<presence>  
Present  
Present  
Present  
Present  
Present  
Present  
Present  
Present  
Present  
Present  
Present  
<pwrState>  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
ON  
Online  
<health>  
Not OK  
OK  
OK  
OK  
OK  
OK  
OK  
OK  
<svcTag>  
ABC1234  
OK  
OK  
OK  
80  
RACADM Subcommand Details  
 
PS-2  
PS-3  
PS-4  
PS-5  
PS-6  
CMC-1  
CMC-2  
Not Present  
Present  
Not Present  
Not Present  
Not Present  
Present  
Not Present  
Not Present  
Not Present  
Not Present  
Not Present  
Not Present  
Not Present  
Not Present  
Present  
Present  
Present  
Present  
Present  
Present  
Not Present  
Not Present  
Extension(2) N/A  
Not Present  
Present  
N/A  
Online  
N/A  
N/A  
N/A  
Primary  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
OFF  
ON  
N/A  
OK  
N/A  
N/A  
N/A  
OK  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
OK  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
Switch-1  
Switch-2  
Switch-3  
Switch-4  
Switch-5  
Switch-6  
Server-1  
Server-2  
Server-3  
Server-4  
Server-5  
Server-6  
Server-7  
Server-8  
Server-9  
Server-10  
Server-11  
Server-12  
Server-13  
Server-14  
Server-15  
Server-16  
KVM  
OK  
OK  
OK  
OK  
S YW  
ON  
ON  
ON  
ON  
N/A  
N/A  
1234567  
OK  
N/A  
N/A  
N/A  
N/A  
OK  
N/A  
OK  
OK  
N/A  
N/A  
N/A  
N/A  
N/A  
ON  
N/A  
ON  
ON  
ON  
Not Present  
Present  
Present  
Present  
Present  
N/A  
0000015  
OK  
OK  
ON  
IO-Cable  
FPC-Cable  
Present  
Present  
ON  
OK  
ABC1234  
ABC1234  
ON  
OK  
NOTE: For CMC (only) a power state of "Primary" denotes Active CMC.  
getniccfg  
NOTE: To use this subcommand, you must have Login to iDRAC permission.  
Subcommand  
Description  
getniccfg  
The getniccfg subcommand displays the current NIC settings.  
Synopsis  
racadm getniccfg  
RACADM Subcommand Details  
81  
     
Sample Output  
The getniccfg subcommand displays an appropriate error message if the  
operation is not successful. Otherwise, on success, the output is displayed in  
the following format:  
IPv4 settings:  
NIC Enabled  
IPv4 Enabled = 1  
DHCP Enabled  
IP Address  
= 1  
= 1  
= 10.35.0.64  
= 255.255.255.0  
= 10.35.0.1  
Subnet Mask  
Gateway  
IPv6 settings:  
IPv6 Enabled  
DHCP6 Enabled  
IP Address 1  
Gateway  
= 0  
= 1  
= ::  
= ::  
Link Local Address = ::  
IP Address 2  
IP Address 3  
IP Address 4  
IP Address 5  
IP Address 6  
IP Address 7  
IP Address 8  
IP Address 9  
IP Address 10  
IP Address 11  
IP Address 12  
IP Address 13  
IP Address 14  
= ::  
= ::  
= ::  
= ::  
= ::  
= ::  
= ::  
= ::  
= ::  
= ::  
= ::  
= ::  
= ::  
82  
RACADM Subcommand Details  
IP Address 15  
= ::  
LOM Status:  
NIC Selection = Dedicated  
Link Detected = Yes  
Speed  
= 10Mb/s  
Duplex Mode  
= Half Duplex  
NOTE: IPv6 information is displayed only if IPv6 is enabled in iDRAC6.  
NOTE: LOM Status is displayed only for iDRAC6 on Rack and Tower servers and is  
not displayed for iDRAC6 Enterprise on Blade servers.  
getpbinfo  
NOTE: To use this subcommand, you must have CMC Login User privilege.  
Subcommand  
Description  
getpbinfo  
Displays power budget status information.  
Synopsis  
racadm getpbinfo  
Example  
racadm getpbinfo  
[Power Budget Status]  
System Input Power  
= 700 W  
Peak System Power  
= 0 W  
Peak System Power Timestamp  
Minimum System Power  
= 01:08:23 01/27/2009  
= 0 W  
Minimum System Power Timestamp = 20:18:30 01/27/2000  
Overall Power Health  
Redundancy  
= Not OK  
= No  
System Input Power Cap  
Redundancy Policy  
= 7928 W  
= None  
Dynamic PSU Engagement Enabled = No  
System Input Max Power Capacity = 0 W  
Input Redundancy Reserve  
= 0 W  
Input Power Allocated to Servers = 0 W  
RACADM Subcommand Details  
83  
     
Input Power Allocated to Chassis Infrastructure = 51 watts  
Total Input Power Available for Allocation  
Standby Input Power Capacity  
= 0 W  
= 0 W  
[Chassis Power Supply Status Table]  
<Name> <Presence> <Power State> <Input Current> <Input Volts>  
<Output Rating>  
PS1  
Online  
On  
16.1 A  
32 V  
N/A  
N/A  
N/A  
2360 W  
PS2  
Not Present  
Not Present  
Not Present  
Slot Empty  
Slot Empty  
Slot Empty  
N/A  
N/A  
PS3  
N/A  
N/A  
PS4  
N/A  
N/A  
PS5  
N/A  
PS6  
N/A  
[Server Module Power Allocation Table]  
<Slot#><Server Name><PowerState><Allocation><Priority><Blade Type>  
Not Present  
Not Present  
Slot Empty  
Slot Empty  
N/A  
N/A  
N/A  
N/A  
1
2
3
4
5
6
7
8
SLOT-01  
SLOT-02  
SLOT-03  
SLOT-04  
SLOT-05  
SLOT-06  
SLOT-07  
SLOT-08  
SLOT-09  
SLOT-10  
SLOT-11  
SLOT-12  
SLOT-13  
SLOT-14  
SLOT-15  
SLOT-16  
N/A  
OFF  
ON  
ON  
ON  
ON  
ON  
N/A  
N/A  
N/A  
0 W  
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
N/A  
PowerEdgeM805  
N/A  
164 W  
155 W  
180 W  
180 W  
170 W  
N/A  
PowerEdgeM600  
N/A  
N/A  
N/A  
N/A  
9
N/A  
10  
11  
12  
13  
14  
15  
16  
Extension(2) N/A  
N/A  
ON  
N/A  
ON  
ON  
ON  
N/A  
125 W  
N/A  
342 W  
140 W  
125 W  
PowerEdgeM600  
N/A  
N/A  
N/A  
84  
RACADM Subcommand Details  
getpminfo  
NOTE: To use this subcommand, you must have CMC Login User privilege.  
Subcommand  
Description  
getpminfo  
Displays power management status information.  
Synopsis  
racadm getpminfo  
Example  
racadm getpminfo  
[Real-Time Power Statistics]  
System Input Power  
Peak System Power  
Peak System Power Start Time  
Peak System Power Timestamp  
Minimum System Power  
= 600 W (188 BTU/hr)  
= 600 W (188 BTU/hr  
= 16:02:10 01/16/2008  
= 06:32:55 01/26/2009  
= 400 W (177 BTU/hr)  
Minimum System Power Start Time = 22:43:21 01/21/2008  
Minimum System Power Timestamp = 06:32:55 01/26/2009  
System Idle Power  
System Potential Power  
System Input Current Reading  
= 68 W (188 BTU/hr)  
= 68 W (188 BTU/hr)  
= 31.2 A  
[Real-Time Energy Statistics]  
System Energy Consumption  
= 6.4 kWh  
System Energy Consumption Start Time  
01/16/2008  
= 16:02:10  
System Energy Consumption Timestamp  
01/16/2008  
= 16:02:10  
[System Power Status]  
Chassis Power State  
Overall Power Health  
Redundancy  
= ON  
= OK  
= No  
RACADM Subcommand Details  
85  
     
[System Power Policy Configuration]  
System Input Power Cap  
BTU/hr | 10%)  
Surplus for Peak Performance  
BTU/hr)  
= 7928 W (7928  
= 7000 W (6130  
Redundancy Policy  
Dynamic PSU Engagement Enabled  
= None  
= No  
[Power Budgeting]  
System Input Max Power Capacity  
Input Redundancy Reserve  
Input Power Allocated to Servers  
= 0 W  
= 0 W  
= 0 W  
Input Power Allocated to Chassis Infrastructure = 51W  
Total Input Power Available for Allocation  
Standby Input Power Capacity  
= 0 W  
= 0 W  
getraclog  
NOTE: To use this subcommand, you must have Login to iDRAC permission.  
Subcommand  
Description  
getraclog  
The getraclog -i command displays all the RAC log entries in the  
DRAC.  
Synopsis  
racadm getraclog -i  
racadm getraclog [-A] [-o] [-c count] [-s start-  
record] [--more]  
Table 2-19 lists the options that allow the getraclog command to read entries.  
Table 2-19. getraclog Subcommand Options  
Option  
-A  
Description  
Displays the output with no headers or labels.  
Provides the maximum count of entries to be returned.  
-c  
86  
RACADM Subcommand Details  
       
Table 2-19. getraclog Subcommand Options (continued)  
Option  
Description  
--more  
Displays one screen at a time and prompts the user to continue (similar to  
the UNIX more command).  
-o  
-s  
Displays the output in a single line.  
Specifies the starting record used for the display.  
NOTE: If no options are provided, the entire log is displayed.  
Output  
The default output display shows the record number, time stamp, source, and  
description. The timestamp begins at midnight, January 1 and increases until  
the system boots. After the system boots, the system’s timestamp is used.  
NOTE: For iDRAC6 Enterprise on Blade Servers, iDRAC6 Log entries for SystemBoot  
displayed using the local racadm command racadm getraclogmay not be  
correctly formatted. For example, some extra characters may be displayed in the  
Description field, or the Source field may be empty.  
Sample Output  
Record:  
1
Date/Time:  
Source:  
Dec 8 08:10:11  
login[433]  
Description: root login from 143.166.157.103  
getractime  
NOTE: To use this subcommand, you must have Login to iDRAC permission.  
Subcommand  
Description  
getractime  
The getractime subcommand displays the current DRAC time.  
Table 2-20 lists the options that allow the getractime command to display the  
time in specific formats:  
RACADM Subcommand Details  
87  
     
Table 2-20. getractime Subcommand Options  
Option  
-d  
Description  
Displays the time in the format, yyyymmddhhmmss.mmmmmms.  
Displays timezone.  
-z  
NOTE: This option is specific to CMC only.  
Displays NTP peer information.  
NOTE: This option is specific to CMC only.  
-n  
NOTE: If no options are provided, the getractime subcommand displays the time in  
a common readable format.  
Synopsis  
racadm getractime [-d]  
racadm getractime [-d] [-z] [-n]  
Sample Output  
racadm getractime  
Thu Dec 8 20:15:26 2005  
racadm getractime -d  
20051208201542.000000  
getredundancymode  
NOTE: To use this subcommand, you must have CMC Login User privilege.  
Subcommand  
Description  
getredundancy Displays the redundancy status (Redundant or Non-Redundant) of  
mode  
the CMC.  
Synopsis  
racadm getredundancymode  
88  
RACADM Subcommand Details  
       
Example  
racadm getredundancymode  
Redundant  
getsel  
NOTE: To use this subcommand, you must have Login to iDRAC permission.  
Subcommand  
Description  
getsel  
The getsel subcommand display all sensor event log entries in the  
DRAC.  
Synopsis  
racadm getsel -i[-A]  
racadm getsel [-s <start>] [-c <count>] [-A] [-o] [-E]  
[-R] [--more]  
NOTE: If no arguments are specified, the entire log is displayed.  
The following getsel options (without the -i option) are used to read entries.  
Table 2-21 describes the getsel subcommand options.  
Table 2-21. getsel Subcommand Options  
Option  
-A  
Description  
Specifies output with no display headers or labels.  
Provides the number of records to be displayed.  
Displays each entry in the SEL in a single line.  
Specifies the starting record used for the display.  
Displays RAW SEL data with the other data for each entry.  
Displays only RAW SEL data for each entry.  
Displays the number of entries in the SEL.  
-c  
-o  
-s  
-E  
-R  
-i  
--more  
Displays one screen at a time and prompts the user to continue (similar to  
the UNIX more command).  
RACADM Subcommand Details  
89  
       
Output  
The default output display shows the record number, timestamp, severity, and  
description.  
For example:  
Record:  
Date/Time: 11/16/2005 22:40:43  
Severity: Ok  
1
Description: System Board SEL: event log sensor for  
System Board, log cleared was asserted  
getsensorinfo  
NOTE: To use this subcommand, you must have CMC Login User privilege.  
Subcommand  
Description  
getsensorinfo  
Displays status for system sensors.  
Synopsis  
racadm getsensorinfo  
Examples  
racadm getsensorinfo  
<senType> <Num> <sensorName> <status> <reading> <units> <lc> <uc>  
FanSpeed  
FanSpeed  
FanSpeed  
FanSpeed  
FanSpeed  
FanSpeed  
FanSpeed  
FanSpeed  
FanSpeed  
1
2
3
4
5
6
7
8
9
Fan-1  
Fan-2  
Fan-3  
Fan-4  
Fan-5  
Fan-6  
Fan-7  
Fan-8  
Fan-9  
OK  
OK  
4768  
4873  
4832  
4704  
4833  
4829  
4719  
1
rpm  
rpm  
rpm  
rpm  
rpm  
rpm  
rpm  
rpm  
rpm  
2344 14500  
2344 14500  
2344 14500  
2344 14500  
2344 14500  
2344 14500  
2344 14500  
2344 14500  
2344 14500  
OK  
OK  
OK  
OK  
OK  
Not OK  
OK  
4815  
<senType> <Num> <sensorName> <status> <reading> <units> <lc> <uc>  
Temp Ambient_Temp OK 22 celcius N/A 40  
1
90  
RACADM Subcommand Details  
     
<senType> <Num>  
<sensorName>  
PS-1  
<status>  
Online  
<AC-OK status>  
PWR  
PWR  
PWR  
PWR  
PWR  
PWR  
1
2
3
4
5
6
OK  
PS-2  
Online  
OK  
PS-3  
Online  
OK  
PS-4  
Slot Empty  
Failed  
N/A  
OK  
PS-5  
PS-6  
Slot Empty  
N/A  
<senType> <Num>  
<sensorName>  
IO-Cable  
<status>  
Cable  
Cable  
1
2
OK  
OK  
FPC-Cable  
getslotname  
NOTE: To use this subcommand, you must have CMC Login User privilege.  
Subcommand  
Description  
getslotname  
Displays the name and hostname (if available) of all 16 slots, or of a  
specified slot (indicated by the slot number) in the chassis.  
Optionally, this command can be used to find if the slot name or  
hostname is displayed in the CMC User Interface or with the  
getslotname -i <slot ID>command. If the hostname  
is not available, the static slot name is used.  
Synopsis  
racadm getslotname  
racadm getslotname -i <slot ID>  
racadm getslotname -h  
RACADM Subcommand Details  
91  
     
Table 2-22 describes the getslotname subcommand options.  
Table 2-22. getslotname Subcommand Options  
Option  
Description  
(None)  
Displays the slot name for all 16 slots in  
the chassis.  
-i <slot ID>  
Specifies the ID of the slot.  
Legal values: 1–16  
-h  
Specifies whether to use the slot name  
or the hostname (if available).  
1=use hostnames, 0=use slotnames  
Example  
racadm getslotname  
<Slot #> <Slot Name>  
<Host name>  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
SLOT-01  
Webserver01  
Webserver3  
SLOT-04  
SLOT-05  
SLOT-06  
SLOT-07  
SLOT-08  
SLOT-09  
SLOT-10  
SLOT-11  
SLOT-12  
SLOT-13  
SLOT-14  
SLOT-15  
SLOT-16  
WXP-8GRB221  
WXP-319QWEecet5  
racadm getslotname -i 1  
Webserver-1  
92  
RACADM Subcommand Details  
 
getssninfo  
NOTE: To use this subcommand, you must have Login to iDRAC permission.  
Subcommand  
Description  
getssinfo  
Displays a list of users that are connected to iDRAC6. The  
following information is displayed:  
• Session ID  
• Username  
• IP address (if applicable)  
• Session type (for example, serial or Telnet)  
• Login date and time in MM/DD/YYYY HH:MM:SS format  
Based on the Session ID (SSNID) or the user name (User), the iDRAC  
administrator can close the respective sessions or all the sessions using the ,  
closessn subcommand. For more information, see "closessn" on page 39 .  
Synopsis  
racadm getssninfo [-A] [-u <username> | *]  
Table 2-23 describes the getssninfo subcommand options.  
Table 2-23. getssninfo Subcommand Options  
Option Description  
-A  
-u  
The -A option eliminates the printing of data headers.  
The -u <username> user name option limits the printed output to only  
the detail session records for the given user name. If an (*) symbol is given  
as the user name, all users are listed. Summary information is not printed  
when this option is specified.  
RACADM Subcommand Details  
93  
       
Examples  
racadm getssninfo  
SSNID  
Type  
User  
IP Address  
Login Date/Time  
6
GUI  
root  
192.168.0.10  
04/07/2010 12:00:34  
racadm getssninfo -A  
"root" "143.166.174.19" "Telnet" "NONE"  
racadm getssninfo -A -u *  
"root" "143.166.174.19" "Telnet" "NONE"  
"bob" "143.166.174.19" "GUI" "NONE"  
getsvctag  
NOTE: To use this subcommand, you must have Login to iDRAC permission.  
Subcommand  
Description  
getsvctag  
Displays the service tag of the host system.  
Synopsis  
racadm getsvctag  
Example  
Type getsvctagat the command prompt. The output is displayed as  
follows:  
Y76TP0G  
94  
RACADM Subcommand Details  
     
getsysinfo  
NOTE: To use this subcommand, you must have Login to iDRAC permission.  
Subcommand  
Description  
getsysinfo  
Displays information related to iDRAC, managed system, and  
watchdog configuration.  
NOTE: The local racadm getsysinfo subcommand on Linux displays the  
PrefixLength on separate lines for IPv6 Address 2 – IPv6 Address 15 and the Link  
Local Address.  
Synopsis  
racadm getsysinfo [-d] [-s] [-w] [-A] [-c] [-4] [-6]  
Table 2-24 describes the getsysinfo subcommand options.  
Table 2-24. getsysinfo Subcommand Options  
Option  
-4  
Description  
Displays IPv4 settings  
-6  
Displays IPv6 settings  
-c  
Displays common settings  
Displays iDRAC6 information  
Displays system information  
Displays watchdog information  
Eliminates the printing of headers/labels  
-d  
-s  
-w  
-A  
If the -w option is not specified, then the other options are used as defaults.  
Sample Output  
RAC Information:  
RAC Date/Time  
= 10/27/2009 14:38:00  
Firmware Version  
Firmware Build  
= 1.30  
= 20  
RACADM Subcommand Details  
95  
       
Last Firmware Update  
Hardware Version  
MAC Address  
= 10/26/2009 16:55:08  
= 0.01  
= 00:24:e8:2e:c5:d3  
Common settings:  
Register DNS RAC Name = 1  
DNS RAC Name  
= eval710-08-r  
= blr.amer.dell.com  
Current DNS Domain  
Domain Name from DHCP = 1  
IPv4 settings:  
Enabled  
= 1  
Current IP Address  
Current IP Gateway  
Current IP Netmask  
DHCP Enabled  
= 10.94.20.134  
= 10.94.20.1  
= 255.255.254.0  
= 1  
Current DNS Server 1  
Current DNS Server 2  
= 163.244.180.39  
= 163.244.180.40  
DNS Servers from DHCP = 1  
IPv6 settings:  
Enabled  
= 1  
Current IP Address 1  
Current IP Gateway  
Autoconfig  
= ::  
= ::  
= 1  
Link Local IP Address = fe80::224:e8ff:fe2e:c5d3/255  
Current IP Address 2  
Current IP Address 3  
Current IP Address 4  
= ::  
= ::  
= ::  
96  
RACADM Subcommand Details  
Current IP Address 5  
Current IP Address 6  
Current IP Address 7  
Current IP Address 8  
Current IP Address 9  
= ::  
= ::  
= ::  
= ::  
= ::  
Current IP Address 10 = ::  
Current IP Address 11 = ::  
Current IP Address 12 = ::  
Current IP Address 13 = ::  
Current IP Address 14 = ::  
Current IP Address 15 = ::  
DNS Servers from DHCPv6 = 0  
Current DNS Server 1  
Current DNS Server 2  
= ::  
= ::  
System Information:  
System Model  
= PowerEdge R710  
= 1.0.4  
System BIOS Version  
Service Tag  
= 2X2Q12S  
Express Svc Code  
Host Name  
= 39059052868  
= WIN-IHF5D2BF5SN  
OS Name = Microsoft Windows Server 2008, Enterprise  
x64 Edition  
System Revision  
Power Status  
= I  
= ON  
Embedded NIC MAC Addresses:  
NIC1 Ethernet  
iSCSI  
= 00:24:e8:2e:c5:cb  
= 00:24:e8:2e:c5:cc  
RACADM Subcommand Details  
97  
NIC2 Ethernet  
iSCSI  
= 00:24:e8:2e:c5:cd  
= 00:24:e8:2e:c5:ce  
= 00:24:e8:2e:c5:cf  
= 00:24:e8:2e:c5:d0  
= 00:24:e8:2e:c5:d1  
= 00:24:e8:2e:c5:d2  
NIC3 Ethernet  
iSCSI  
NIC4 Ethernet  
iSCSI  
Watchdog Information:  
Recovery Action  
= None  
Present countdown value = 15 seconds  
Initial countdown value = 15 seconds  
Examples  
racadm getsysinfo -A -s  
"System Information:" "PowerEdge 2900" "A08" "1.0"  
"EF23VQ-0023" "Hostname"  
"Microsoft Windows 2000 version 5.0, Build Number  
2195, Service Pack 2" "ON"  
racadm getsysinfo -w -s  
System Information:  
System Model  
System Revision  
System BIOS Version  
BMC Firmware Version  
Service Tag  
= PowerEdge 2900  
= I  
= 0.2.3  
= 0.17  
= 48192  
Host Name  
OS Name  
= racdev103  
= Microsoft Windows  
Server 2003  
Power Status  
= OFF  
Watchdog Information:  
Recovery Action  
= None  
Present countdown value = 0 seconds  
Initial countdown value = 0 seconds  
98  
RACADM Subcommand Details  
Limitations  
The Hostname and OS Name fields in the getsysinfo output display accurate  
information only if Dell OpenManage Server Administrator is installed on the  
managed system. If it is not installed, these fields may be blank or inaccurate.  
An exception to this are VMware operating system names, which are  
displayed even if Server Administrator is not installed on the managed  
system.  
gettracelog  
NOTE: To use this subcommand, you must have Login to iDRAC permission.  
Subcommand  
Description  
gettracelog  
The gettracelog sub command lists all the trace log entries in the  
DRAC.  
Table 2-25 lists the gettracelog options used to read entries.  
Table 2-25. gettracelog Subcommand options  
Option  
-i  
Description  
Displays the number of entries in iDRAC6 trace log.  
-m  
Displays one screen at a time and prompts the user to continue  
(similar to the UNIX more command).  
-o  
-c  
-s  
Displays each entry in a single line.  
Specifies the number of records to display.  
Specifies the starting record to display.  
Do not display headers or labels.  
-A  
Synopsis  
racadm gettracelog -i[-A]  
racadm gettracelog [-s <start>] [-c <count>] [-m] [-A]  
[-o]  
RACADM Subcommand Details  
99  
       
Output  
The default output display shows the record number, timestamp, source, and  
description. The timestamp begins at midnight, January 1 and increases until  
the system boots. After the system boots, the system’s timestamp is used.  
For example:  
Record:  
Date/Time: Dec 8 08:21:30  
Source: ssnmgrd[175]  
1
Description: root from 143.166.157.103: session  
timeout sid 0be0aef4  
getuscversion  
NOTE: This option is applicable only for iDRAC6.  
Subcommand  
Description  
getuscversion  
Displays the current USC software version details in iDRAC.  
Synopsis  
racadm getuscversion  
Example  
$ racadm getuscversion  
1.2.3.4  
100  
RACADM Subcommand Details  
     
getversion  
NOTE: To use this subcommand, you must have Login privilege.  
Subcommand  
Description  
getversion  
Displays the current software version, model and generation  
information, and whether or not the target device can be updated.  
Synopsis  
racadm getversion [-b | -c] [-m <module>]  
racadm getversion -l [-m <module>] [-f <filter>]  
racadm getversion  
Table 2-26 describes the getversion subcommand options.  
Table 2-26. getversion Subcommand Options  
Option  
Description  
(none)  
Displays the version information for all targets or devices.  
-m  
<module>  
Specifies the module or device for which you want to retrieve the  
version information.  
<module> is one of the following:  
server-  
• cmc- where n= 1 or 2. For example, cmc-2  
Displays the server's current CPLD version.  
n
where  
n
= 1-16. For example, server-1.  
n
.
-c  
-b  
-l  
Displays the server's current BIOS version (default is iDRAC version).  
Displays the firmware versions of available server components.  
RACADM Subcommand Details  
101  
       
Table 2-26. getversion Subcommand Options (continued)  
Option  
Description  
-f <filter>  
Filters the components. Must be used with -l and be one of the  
following values:  
• bios: BIOS  
• idrac: iDRAC  
• usc: Lifecycle Controller (Unified Server Configurator)  
• diag: 32-bit Diagnostics  
• drivers: OS Driver Package  
• nic-x: Network Interface card. See -  
l
output for possible values of x  
• raid-x: Raid Controller. See - output for possible values of x  
l
NOTE: The -b, -c and -l options are not available for CMC modules.  
NOTE: The -l option requires that the Lifecycle Controller service is enabled on the  
servers. For version information, see the RACADM Readme available on the Dell  
Support website at dell.com/support/manuals.  
Example  
racadm getversion -m server-15  
<server> <iDRAC version> <model name> <Gen> <Updatable>  
server-15  
2.00(Build 10) PowerEdgeM605 iDRAC  
N
racadm getversion  
<Server> <iDRAC Version> <Blade Type> <Gen> <Updatable>  
server-2 1.50  
server-3 2.10  
server-4 1.50  
PowerEdgeM600 iDRAC Y  
PowerEdgeM610 iDRAC6 Y  
PowerEdgeM605 iDRAC Y  
<CMC>  
cmc-1  
<CMC Version>  
<Updatable>  
2.10.X06.200906  
080825  
Y
102  
RACADM Subcommand Details  
racadm getversion -c  
<Server>  
server-1  
server-2  
server-5  
<CPLD Version> <Blade Type>  
PowerEdgeM600  
PowerEdgeM805  
PowerEdgeM710  
1.0.0  
racadm getversion -b  
<Server>  
server-1  
server-2  
server-5  
<BIOS Version> <Blade Type>  
2.0.0  
1.1.0  
1.1.0  
PowerEdgeM605  
PowerEdgeM805  
PowerEdgeM710  
racadm getversion -l -m server-1  
<Server> <Component>  
server-1 BIOS  
iDRAC  
<Version>  
1.2.1  
<Install Date>  
2010-11-22  
2010-11-22  
2011-02-05  
2011-02-07  
2010-11-22  
2011-02-02  
3.20  
USC  
1.5.0.667  
5144A0  
6.3.0.15  
5.2.0  
Diagnostics  
OS Drivers  
Broadcom 5709  
Emb(nic-1)  
Broadcom 5709  
Emb(nic-1)  
5.2.0  
5.2.0  
5.2.0  
2011-02-02  
2011-02-02  
2011-02-02  
Broadcom 5709  
Emb(nic-1)  
Broadcom 5709  
Emb(nic-1)  
PERC6 EMB (raid-2) 07.01.34.00  
BIOS 0.1.7  
2011-02-02  
Rollback  
RACADM Subcommand Details  
103  
BIOS  
1.2.1  
3.20  
Reinstall  
Reinstall  
Rollback  
Reinstall  
iDRAC  
PERC6 Emb (raid-2) 07.01.33.00  
PERC6 Emb (raid-2) 07.01.33.00  
racadm getversion -l -m server-1 -f bios  
<Server>  
server-1  
<Component>  
BIOS  
<Version>  
1.2.1  
<Install Date>  
2010-11-22  
ifconfig  
NOTE: To use this subcommand, you must have Execute Diagnostic Commands or  
Configure iDRAC permission.  
Subcommand  
Description  
ifconfig  
Displays the contents of the network interface table.  
Synopsis  
racadm ifconfig  
Example  
$ racadm ifconfig  
eth0 Link encap:Ethernet HWaddr 00:1D:09:FF:DA:23  
inet addr:10.35.155.136 Bcast:10.35.155.255  
Mask:255.255.255.0  
UP BROADCAST RUNNING MULTICAST MTU:1500  
Metric:1  
RX packets:2550665 errors:0 dropped:0  
overruns:0 frame:0  
TX packets:0 errors:0 dropped:0 overruns:0  
carrier:0  
104  
RACADM Subcommand Details  
     
collisions:0 txqueuelen:1000  
RX bytes:272532097 (259.9 MiB) TX bytes:0  
(0.0 B)  
krbkeytabupload  
NOTE: To use this subcommand, you must have Configure iDRAC permission.  
Subcommand  
Description  
krbkeytabupload  
Uploads a Kerberos keytab file.  
Synopsis  
racadm krbkeytabupload [-f <filename>]  
<filename> is the name of the file including the path.  
Table 2-27 describes the krbkeytabupload subcommand options.  
Table 2-27. kerbkeytabupload Subcommand Options  
Option  
Description  
-f  
Specifies the file name of the keytab to be uploaded. If the file is not  
specified, the keytab file in the current directory is selected.  
The krbkeytabupload command returns 0when successful and returns  
a non–zero number when unsuccessful.  
Example  
racadm krbkeytabupload -f c:\keytab\krbkeytab.tab  
RACADM Subcommand Details  
105  
     
kmcSelfSignedCertGen  
NOTE: The current release does not support this subcommand.  
NOTE: This is a non-extensible command that does not take any specific options.  
Subcommand  
Description  
kmcSelfSignedCertGen Generates the new self signed certificate for KMS  
purposes.  
To generate a selfsigned certificate, data such as certificate specific  
information like Common name, Organization Unit, key size and so on, are  
required.This information is taken from the cfgRacSecurityData group with  
index set to 2.  
localConRedirDisable  
NOTE: Only a local RACADM user can execute this command.  
NOTE: This option is applicable only for iDRAC6..  
Subcommand  
Description  
localConRedirDisable  
Disables Virtual Console to the management station.  
Synopsis  
racadm localConRedirDisable <option>  
If <option>is set to 1, Virtual Console is disabled.  
If <option>is set to 0, Virtual Console is enabled.  
106  
RACADM Subcommand Details  
         
netstat  
NOTE: To use this subcommand, you must have Execute Diagnostic Commands  
permission.  
Subcommand  
Description  
netstat  
Displays the routing table and the current connections.  
Synopsis  
racadm netstat  
ping  
NOTE: To use this subcommand, you must have Execute Diagnostic Commands or  
Configure iDRAC permission.  
Subcommand Description  
ping  
Verifies that the destination IP address is reachable from iDRAC6  
with the current routing-table contents. A destination IP address is  
required. An ICMP echo packet is sent to the destination IP address  
based on the current routing-table contents.  
Synopsis  
racadm ping <ipaddress>  
RACADM Subcommand Details  
107  
           
ping6  
NOTE: To use this subcommand for CMC you must have Administrator privilege for  
CMC and for iDRAC you must have Execute Diagnostic Commands or Configure  
iDRAC6 permission.  
Subcommand Description  
ping6  
Verifies that the destination IPv6 address is reachable from iDRAC6  
or CMC or with the current routing-table contents. A destination  
IPv6 address is required. An ICMP echo packet is sent to the  
destination IPv6 address based on the current routing-table contents.  
Synopsis  
racadm ping6 <ipv6address>  
Examples  
racadm iping6 10.9.72.254  
IPING6 10.9.72.254 (10.9.72.254): 56 data bytes  
64 bytes from 10.9.72.254: icmp_seq=0 ttl=121 time=2.9  
ms  
--- 10.9.72.254 ping statistics ---  
1 packets transmitted, 1 packets received, 0 percent  
packet loss  
round-trip min/avg/max = 2.9/2.9/2.9 ms  
108  
RACADM Subcommand Details  
     
racdump  
NOTE: To use this subcommand for CMC you must have Administrator privilege  
and for iDRAC you must have Debug permission.  
Subcommand Description  
racdump  
Provides a single command to get dump, status, and general iDRAC6  
board information.  
For CMC, this subcommand displays the comprehensive chassis  
status and configuration state information, as well as historic event  
logs. Used for post deployment configuration verification and during  
debugging sessions.  
The following information is displayed when the racdump subcommand is  
processed:  
General system/RAC information  
Coredump  
Session information  
Process information  
Firmware build information  
Racdump includes the following subsystems and aggregates the following  
RACADM commands:  
Subsystem  
RACADM Command  
getsysinfo  
General System/RAC information  
Session information  
getssinfo  
Sensor information  
getsensorinfo  
getioinfo  
Switches information (IO Module)  
Mezzanine card information (Daughter card) getdcinfo  
All modules information  
Power budget information  
KVM information  
getmodinfo  
getpbinfo  
getkvminfo  
RACADM Subcommand Details  
109  
     
Subsystem  
RACADM Command  
getniccfg  
NIC information (CMC module)  
Redundancy information  
getredundancymode  
Synopsis  
racadm racdump  
Example  
racadm racdump  
=====================================================  
==========================  
General System/RAC Information  
=====================================================  
==========================  
CMC Information:  
CMC Date/Time  
=
Wed, 28 Nov 2007 11:55:49 PM  
Active CMC Version  
Standby CMC Version  
Last Firmware Update  
Hardware Version  
Current IP Address  
Current IP Gateway  
Current IP Netmask  
DHCP Enabled  
= X08  
= N/A  
= Wed Nov 21 21:37:56 2007  
= 2  
= 10.35.155.160  
= 10.35.155.1  
= 255.255.255.0  
= 1  
MAC Address  
Current DNS Server 1  
Current DNS Server 2  
= 00:55:AB:39:10:0F  
= 0.0.0.0  
= 0.0.0.0  
DNS Servers from DHCP = 0  
Register DNS CMC Name = 0  
DNS CMC Name  
= cmc-servicetag  
Current DNS Domain  
=
Chassis Information:  
System Model  
= PowerEdgeM1000eControlPanel  
110  
RACADM Subcommand Details  
System AssetTag  
Service Tag  
= 00000  
=
Chassis Name  
Chassis Location  
Power Status  
= Dell Rack System  
= [UNDEFINED]  
= ON  
=====================================================  
==========================  
Session Information  
=====================================================  
==========================  
Type  
SSH  
User  
root  
root  
IP Address  
Login Date/Time  
10.9.72.252  
169.254.31.30  
11/28/2007 23:40:53  
11/28/2007 18:44:51  
KVM  
=====================================================  
==========================  
Sensor Information  
=====================================================  
==========================  
<senType> <Num> <sensorName> <status> <reading> <units> <lc> <uc>  
FanSpeed  
FanSpeed  
FanSpeed  
FanSpeed  
FanSpeed  
FanSpeed  
FanSpeed  
FanSpeed  
FanSpeed  
1
2
3
4
5
6
7
8
9
Fan-1  
Fan-2  
Fan-3  
Fan-4  
Fan-5  
Fan-6  
Fan-7  
Fan-8  
Fan-9  
OK  
OK  
14495  
14505  
4839  
14527  
14505  
4835  
14521  
1
rpm  
rpm  
rpm  
rpm  
rpm  
rpm  
rpm  
rpm  
rpm  
7250 14500  
7250 14500  
2344 14500  
7250 14500  
7250 14500  
2344 14500  
7250 14500  
7250 14500  
2344 14500  
OK  
OK  
OK  
OK  
OK  
Not OK  
OK  
4826  
<senType> <Num> <sensorName> <status> <reading> <units> <lc> <uc>  
Temp Ambient_Temp OK 21 celcius N/A 40  
1
RACADM Subcommand Details  
111  
<senType> <Num> <sensorName> <status>  
<AC-OK status>  
PWR  
PWR  
PWR  
PWR  
PWR  
PWR  
1
2
3
4
5
6
PS-1  
PS-2  
PS-3  
PS-4  
PS-5  
PS-6  
Online  
Online  
OK  
OK  
Online  
OK  
Slot Empty  
Failed  
N/A  
OK  
Slot Empty  
N/A  
racreset  
NOTE: To use this subcommand for CMC you must have Chassis Administrator  
privilege and for iDRAC you must have Configure iDRAC permission.  
NOTE: When you issue a racreset subcommand, iDRAC6 may require up to two  
minutes to return to a usable state.  
Subcommand Description  
racreset  
Issues a reset to iDRAC6. The reset event is written into iDRAC6 log.  
NOTE: You must reboot your system after performing a hard reset of iDRAC6 as  
described in Table 2-28.  
Synopsis  
racadm racreset [hard | soft]  
Table 2-28 describes the racreset subcommand options.  
Table 2-28. racreset Subcommand Options  
Option  
Description  
hard  
A hard reset performs a deep reset operation on the remote access  
controller. A hard reset should only be used as a last case resort of  
resetting iDRAC6 controller for recovery purposes.  
soft  
A soft reset performs a graceful reboot operation on the RAC.  
Examples  
racadm racreset  
Start the iDRAC6 soft reset sequence.  
112  
RACADM Subcommand Details  
       
racadm racreset hard  
Start the iDRAC6 hard reset sequence.  
racresetcfg  
NOTE: To use this subcommand, you must have Configure iDRAC permission.  
Subcommand Description  
racresetcfg  
Removes all user-configured database property entries. The database  
has default properties for all entries that are used to restore iDRAC6  
to the default settings. After resetting the database properties,  
iDRAC6 resets automatically.  
NOTE: The racresetcfg subcommand does not reset the cfgDNSRacName object.  
NOTE: This command deletes your current iDRAC6 configuration and resets  
iDRAC6 and serial configuration to the default settings. After reset, the default name  
and password is root and calvin, respectively, and the IP address is 192.168.0.120.  
Only for iDRAC6 Enterprise on Blade servers, it is IP address plus the number of the  
slot the server inhabits in the chassis. If you issue racresetcfg from a network client  
(for example, a supported Web browser, Telnet/ssh, or remote RACADM), you must  
use the default IP address.  
NOTE: Certain iDRAC6 firmware processes need to be stopped and restarted for  
reset to defaults to complete. iDRAC6 becomes unresponsive for about 30 seconds  
while this operation completes.  
Synopsis  
racadm racresetcfg  
RACADM Subcommand Details  
113  
     
remoteimage  
NOTE: To use this subcommand, you must have Administrator permission.  
Subcommand Description  
remoteimage Connects, disconnects, or deploys a media file on a remote server.  
Synopsis  
racadm remoteimage <options>  
Table 2-29 describes the remoteimage subcommand options.  
Table 2-29. remoteimage Subcommand Options and Descriptions  
Option Description  
-c  
-d  
-u  
-p  
-l  
Connect the image.  
Disconnect image.  
Username to access the network share.  
Password to access the network share.  
Image location on the network share; use double quotes around the  
location.  
-s  
Display current status; –a is assumed if not specified.  
NOTE: If a drive is already connected, this remote image -c (connect) command  
terminates the previous command or the previous session.  
Example  
racadm remoteimage -c -u user -p password -l  
//10.94.192.100/CommonShare/diskette.img  
114  
RACADM Subcommand Details  
     
serveraction  
NOTE: To use this subcommand, you must have Execute Server Control Commands  
permission.  
Subcommand Description  
serveraction Enables users to perform power management operations on the host  
system.  
Synopsis  
racadm serveraction <action>  
Table 2-30 describes the serveraction power control options.  
Table 2-30. serveraction Subcommand Options  
String  
Description  
<action>  
Specifies the action. The options for the <action> string are:  
powerdown — Powers down the managed system.  
powerup — Powers up the managed system.  
powercycle — Issues a power-cycle operation on the managed  
system. This action is similar to pressing the power button on the  
system’s front panel to power down and then power up the system.  
powerstatus — Displays the current power status of the server (ON  
or OFF)  
hardreset — Performs a reset (reboot) operation on the managed  
system.  
Output  
The serveraction subcommand displays an error message if the requested  
operation could not be performed, or a success message if the operation is  
completed successfully.  
RACADM Subcommand Details  
115  
       
setassettag  
NOTE: To use this subcommand, you must have Administrator privilege.  
Subcommand Description  
setassettag  
Sets the N-byte ASCII asset tag for the chassis.  
Synopsis  
racadm setassettag -m chassis <asset tag>  
116  
RACADM Subcommand Details  
     
Table 2-31 describes the setassettag subcommand option.  
Table 2-31. setassettag Subcommand Options  
Option  
Command  
-m <module>  
Specifies the module whose asset tag you want to set.  
Legal value: chassis  
NOTE: Because there is only one legal value, you can  
obtain the same output if you do not include this option.  
NOTE: <assettag> is a maximum of 64 non-extended ASCII  
characters.  
Example  
Input:  
racadm setassettag -m chassis 783839–33  
or  
racadm setassettag 783839–33  
The asset tag was changed successfully.  
setchassisname  
NOTE: To use this subcommand, you must have Administrator privilege.  
Subcommand Description  
setchassisname Sets the name of the chassis in the LCD.  
Synopsis  
racadm setchassisname <name>  
NOTE: Chassisname is a maximum of 64 non-extended ASCII characters  
Example  
racadm setchassisname dellchassis-1  
The chassis name was set successfully.  
RACADM Subcommand Details  
117  
       
setflexaddr  
NOTE: To use this subcommand, you must have Chassis Configuration  
Administrator privilege.  
Subcommand Description  
setflexaddr  
Enables/disables FlexAddress on a particular slot/fabric.  
NOTE: If the fabric type is determined to be Infiniband, the operation is canceled  
and the command returns an error. If the FlexAddress feature is not activated, the  
command returns an error.  
NOTE: The server must be powered off to change the slot state. All servers must be  
powered off to change the fabric state. The MAC/WWN addresses must be  
managed locally (not by an external console) to use this command.  
Synopsis  
racadm setflexaddr [-i <slot#> <state>]  
[-f <fabricName> <state>]  
<slot#> = 1 to 16  
<fabricName> = A, B, C  
<state> = 0 or 1  
where 0 is disable and 1 is enable.  
Table 2-32 describes the setflexaddr subcommand options.  
Table 2-32. setflexaddr Subcommand Options  
Option  
Description  
-i <slot#> <state>  
Enables/disables FlexAddress for the specified slot.  
-f <fabricName> <state> Enables/disables FlexAddress for the specified fabric.  
118  
RACADM Subcommand Details  
       
Example  
racadm setflexaddr -i 1 0  
Slot 1 FlexAddress state set successfully  
racadm setflexaddr -f A 1  
Fabric A FlexAddress state set successfully  
racadm setflexaddr -f idrac 1  
setled  
NOTE: To use this subcommand, you must have Login access and Administrator  
privilege for CMC and Configure iDRAC permission for iDRAC.  
Subcommand Description  
setled  
Sets the state (blinking or not blinking) of the LED on the specified  
module.  
Synopsis for iDRAC6  
racadm setled -l <ledState>  
Synopsis for CMC  
racadm setled -m <module> -l <ledState>  
RACADM Subcommand Details  
119  
     
Table 2-33 describes the setled subcommand options.  
Table 2-33. setled Subcommand Options  
Option  
Description  
-m <module>  
NOTE: This option is applicable for CMC only.  
Specifies the module whose LED you want to configure.  
<module> can be one of the following:  
server-nwhere  
n
=1–16  
=1–6  
switch-nwhere  
n
cmc-active  
chassis  
-l <ledstate>  
Specifies whether the LED should blink.  
<ledstate> can be one of the following:  
0
1
— no blinking  
— blinking  
Example for CMC  
racadm setled -m server-1 -1 1  
LED state was set successfully.  
NOTE: The setled command generates an error when used on the extension slot of  
a multi-slot server.  
racadm setled -m server-9 -1 1  
ERROR: Server in slot 9 is an extension of the  
server in slot 1.  
Example for iDRAC6  
racadm setled -l 1  
LED state was set successfully.  
120  
RACADM Subcommand Details  
 
setniccfg  
NOTE: To use the setniccfg command, you must have Configure iDRAC permission.  
Subcommand Description  
setniccfg The setniccfg subcommand sets the iDRAC6 IP address. It displays  
an error message if the requested operation could not be performed,  
or a success message if the operation completed successfully.  
NOTE: The terms NIC and Ethernet management port may be used  
interchangeably.  
Synopsis  
racadm setniccfg -d  
racadm setniccfg -d6  
racadm setniccfg -s <IPv4Address> <netmask> <IPv4  
gateway>  
racadm setniccfg -s6 <IPv6 Address> <IPv6 Prefix  
Length> <IPv6 Gateway>  
racadm setniccfg -o  
Table 2-34 describes the setniccfg subcommand options.  
Table 2-34. setniccfg Subcommand Options  
Option Description  
-d  
Enables DHCP for the NIC (default is DHCP disabled).  
Enables AutoConfig for the NIC. It is enabled by default.  
-d6  
-s  
Enables static IP settings. The IPv4 address, netmask, and gateway can be  
specified. Otherwise, the existing static settings are used. <IPv4Address>,  
<netmask>, and <gateway> must be typed as dot-separated strings.  
racadm setniccfg -s 192.168.0.120 255.255.255.0  
192.168.0.1  
-s6  
Enables static IPv6 settings. The IPv6 address, Prefix Length, and the IPv6  
Gateway can be specified.  
RACADM Subcommand Details  
121  
       
setractime  
NOTE: To use this subcommand, you must have Administrator privilege.  
Subcommand Description  
setractime  
Sets the date and time on the CMC.  
Synopsis  
racadm setractime -d <yyyymmddhhmmss.mmmmmmsoff>  
racadm setractime [-l YYYYMMDDhhmmss] -z  
{?|timezone|timezone-prefix*}  
Table 2-35 describes the setractime subcommand options.  
Table 2-35. setractime Subcommand Options  
Option  
Description  
-d  
Sets the time in the string yyyymmddhhmmss.mmmmmmsoff where:  
yyyyis a the year  
mmis the month  
ddis the day  
hhis the hour  
mmis the minutes  
ssis the seconds  
mmmmmmis the number of microseconds  
s
is a  
+
(plus) sign or a  
-
(minus) sign, which indicates the sign of the  
offset  
offis the offset in minutes  
NOTE: The offis the offset in minutes from GMT and must be in 15-minute  
increments. The timezone is represented as an offset from GMT, and the  
clock does not automatically adjust for daylight savings time (for '-d'  
option).  
122  
RACADM Subcommand Details  
       
Table 2-35. setractime Subcommand Options (continued)  
Option Description  
-z <zone> Sets the time zone by name or index, or lists possible time zones.  
<zone> may be:  
• <?> lists the major timezone names/prefixes  
• <timezone> is the case-sensitive name of your timezone or the index  
listed by '-z timezone-prefix*'.  
• <timezone-prefix*> is a prefix of one or more timezones, followed by  
'*'.  
NOTE: The timezone/daylight savings time is fully supported for '-l' and '-z'  
options. Omit the '-l' option to set the timezone only (eg. '-z US/Central').  
-l  
Sets the local date and time in the string yyyymmddhhmmsswhere:  
yyyyis a the year  
mmis the month  
ddis the day  
hhis the hour  
mmis the minute  
ssis the second  
NOTE: Setting the time using the -l and -z options is recommended. This  
command format allows the CMC to fully support local time zones,  
including the ability to automatically adjust the CMC time to the local  
Daylight Savings Time.  
Example  
The setractime subcommand supports dates ranging from 1/1/1970 00:00:00  
through 12/31/2030 23:59:59. To set the date to October 24, 2007 at 3:02:30  
PM PST:  
racadm setractime -l 20071024150230 -z PST8PDT  
The time was set successfully.  
RACADM Subcommand Details  
123  
setslotname  
NOTE: To use this subcommand, you must have Administrator privilege.  
NOTE: See the "Editing Slot Names" section in the Dell Chassis Management  
Controller User Guide for rules for selecting slot names.  
Subcommand Description  
setslotname Displays the name and hostname (if available) of all 16 slots, or of a  
specified slot (indicated by the slot number) in the chassis.  
Optionally, this command can be used to set whether the slot name or  
hostname is displayed in the CMC User Interface or with the  
getslotname -i <slot ID> command. If the hostname is not available,  
the static slot name is used.  
NOTE: The OMSA server agent must be present and running on the server to use  
the Display Hostname feature. If the agent is not running, the setting is ignored. For  
more information, see the Dell OpenManage Server Administrator User's Guide at  
dell.com/support/manuals.  
Synopsis  
racadm setslotname -i <slotID> <slotname>  
racadm setslotname -h <enabled>  
Table 2-36 describes the setslotname subcommand options.  
Table 2-36. setslotname Subcommand Options  
Option  
Description  
<slotID>  
Displays the location of the slot in the chassis.  
Legal values: 1–16  
<slotname>  
The new name to assign to the slot.  
Sets whether the server's hostname is used for display purposes.  
1 = enabled  
<enabled>  
Legal values: 0, 1  
124  
RACADM Subcommand Details  
       
Example  
racadm setslotname -i 3 mserver3  
The slot name was set successfully.  
setsysinfo  
NOTE: To use this subcommand, you must have Administrator privilege.  
Subcommand Description  
setsysinfo  
Sets the name or location of the chassis.  
Synopsis  
racadm setsysinfo [-c chassisname|chassislocation]  
<string>  
Table 2-37 describes the setsysinfo subcommand options.  
Table 2-37. setsysinfo Subcommand Options  
Option  
Description  
<string>  
Indicates a maximum of 64 non-extended ASCII chassis name  
or location.  
-c  
Sets the chassis name or location.  
Example  
racadm setsysinfo -c chassisname "Dell Rack System"  
The chassis name was set successfully.  
RACADM Subcommand Details  
125  
       
sshpkauth  
Subcommand Description  
sshpkauth  
Enables you to upload and manage up to 4 different SSH public keys  
per user. You can upload a key file or key text, view keys, or delete keys.  
This command has three mutually exclusive modes—upload, view, and delete  
that are determined by the options (see Table 2-38) provided for the  
command.  
Synopsis  
racadm sshpkauth  
Upload  
The upload mode allows you to upload a keyfile or to copy the key text on the  
command line. You cannot upload and copy a key at the same time.  
Local and Remote RACADM:  
racadm sshpkauth -i <2 to 16> -k <1 to 4> -f  
<filename>  
racadm sshpkauth -i <2 to 16> -k <1 to 4> -t  
<key-text>  
Telnet/ssh/serial RACADM:  
racadm sshpkauth -i <2 to 16> -k <1 to 4> -t  
<key-text>  
View  
The view mode allows the user to view a key specified by the user or all keys.  
racadm sshpkauth -i <2 to 16> -v -k <1 to 4>  
racadm sshpkauth -i <2 to 16> -v -k all  
126  
RACADM Subcommand Details  
   
Delete  
The delete mode allows the user to delete a key specified by the user or all  
keys.  
racadm sshpkauth -i <2 to 16> -d -k <1 to 4>  
racadm sshpkauth -i <2 to 16> -d -k all  
Table 2-38 describes the sshpkauth subcommand options.  
Table 2-38. sshpkauth Subcommand Options  
Option  
Description  
-i <user index>  
Index for the user. <user index> must be between 2 to 16 on  
iDRAC6.  
-k [<key index> | all] Index to assign the PK key being uploaded. all only works with  
the -v or -d options. <key index> must be between 1 to 4 or  
all on iDRAC6.  
-t <PK Key Text>  
Key text for the SSH Public key.  
-f <filename>  
File containing the key text to upload. The -f option is not  
supported on Telnet/ssh/serial RACADM.  
-v  
View the key text for the index provided.  
Delete the key for the index provided.  
-d  
Examples  
Upload an invalid key to iDRAC6 User 2 in the first key space using a string:  
$ racadm sshpkauth -i 2 -k 1 -t "This is invalid key  
Text"  
ERROR: Key text appears to be corrupt  
Upload a valid key to iDRAC6 User 2 in the first key space using a file:  
$ racadm sshpkauth -i 2 -k 1 -f pkkey.key  
Key file successfully uploaded.  
Get all keys for User 2 on iDRAC6:  
$ racadm sshpkauth -v -i 2 -k all  
********************* User ID 2 ******************  
Key ID 1:  
RACADM Subcommand Details  
127  
 
ssh-rsa  
AAAAB3NzaC1yc2EAAAABIwAAAIEAzzy+k2npnKqVEXGXIzo0sbR6J  
gA5YNbWs3ekoxXV  
fe3yJVpVc/5zrrr7XrwKbJAJTqSw8Dg3iR4n3vUaP+lPHmUv5Mn55  
Ea6LHUslAXFqXmOdlThd  
wilU2VLw/iRH1ZymUFnut8ggbPQgqV2L8bsUaMqb5PooIIvV6hy4i  
sCNJU= 1024-bit RSA, converted from OpenSSH by  
Key ID 2:  
Key ID 3:  
Key ID 4:  
sslcertdownload  
NOTE: To use this subcommand, you must have Configure iDRAC permission.  
Subcommand  
Description  
sslcertdownload Downloads an SSL certificate from iDRAC6 to the client’s file system.  
Synopsis  
racadm sslcertdownload -t <type> [-f <filename>]  
Table 2-39 describes the sslcertdownload subcommand options.  
Table 2-39. sslcertdownload Subcommand Options  
Option Description  
-t  
Specifies the type of certificate to download, either the CA certificate for  
Directory Service or the server certificate.  
1 = server certificate  
2 = CA certificate for Directory Service  
3 = KMS public certificate  
4 = KMC public certificate  
NOTE: The current release does not support type 3 and 4.  
128  
RACADM Subcommand Details  
       
Table 2-39. sslcertdownload Subcommand Options  
-f  
Specifies the file name of the certificate to be uploaded. If the -f option or the  
filename is not specified, the sslcert file in the current directory is selected.  
The sslcertdownload command returns 0when successful and returns a  
nonzero number when unsuccessful.  
Example  
racadm sslcertdownload -t 1 -f c:\cert\cert.txt  
sslcertupload  
NOTE: To use this subcommand, you must have Configure iDRAC permission.  
Subcommand  
Description  
sslcertupload  
Uploads a custom SSL server or CA certificate  
for Directory Service from the client to  
iDRAC6.  
Synopsis  
racadm sslcertupload -t <type> [-f <filename>]  
RACADM Subcommand Details  
129  
     
Table 2-40 describes the sslcertupload subcommand options.  
Table 2-40. sslcertupload Subcommand Options  
Option Description  
-t  
Specifies the type of certificate to upload, either the CA certificate for  
Directory Service or the server certificate.  
1 = server certificate  
2 = CA certificate for Directory Service  
3 = KMS public certificate  
4 = KMC public certificate  
NOTE: The current release does not support type 3 and 4.  
-f  
Specifies the file name of the certificate to be uploaded. If the file is not  
specified, the sslcert file in the current directory is selected.  
-e  
Allows for upload of multiple certificate format types.  
1 = Base64  
2 = PKCS12  
NOTE: The current release does not support this option.  
Pin for decrypting the PKCS12 file uploaded.  
NOTE: If <format type> is selected as 2 it is mandatory to specify -p option.  
NOTE: The current release does not support this option  
-p  
The sslcertupload command returns 0when successful and returns a nonzero  
number when unsuccessful.  
Example  
racadm sslcertupload -t 1 -f c:\cert\cert.txt  
130  
RACADM Subcommand Details  
 
sslcertview  
NOTE: To use this subcommand, you must have Configure iDRAC permission.  
Subcommand  
Description  
sslcertview  
Displays the SSL server or CA certificate that  
exists on iDRAC6.  
Synopsis  
racadm sslcertview -t <type> [-A]  
Table 2-41 describes the sslcertview subcommand options.  
NOTE: The current release does not support type 3 and 4 -t options.  
Table 2-41. sslcertview Subcommand Options  
Option  
Description  
-t  
Specifies the type of certificate to view, either the CA certificate or  
server certificate.  
1 = server certificate  
2 = CA certificate for Directory Service  
3 = KMS public certificate  
4 = KMC public certificate  
NOTE: The current release does not support type 3 and 4.  
Prevents printing headers/labels.  
-A  
Sample Output  
racadm sslcertview -t 1  
Serial Number  
: 00  
Subject Information:  
Country Code (CC)  
State (S)  
: US  
: Texas  
: Round Rock  
Locality (L)  
RACADM Subcommand Details  
131  
       
Organization (O)  
: Dell Inc.  
Organizational Unit (OU) : Remote Access Group  
Common Name (CN)  
: iDRAC6 default certificate  
Issuer Information:  
Country Code (CC)  
State (S)  
: US  
: Texas  
Locality (L)  
Organization (O)  
: Round Rock  
: Dell Inc.  
Organizational Unit (OU) : Remote Access Group  
Common Name (CN)  
: iDRAC6 default certificate  
Valid From  
Valid To  
: Jul 8 16:21:56 2005 GMT  
: Jul 7 16:21:56 2010 GMT  
racadm sslcertview -t 1 -A  
00  
US  
Texas  
Round Rock  
Dell Inc.  
Remote Access Group  
iDRAC6 default certificate  
US  
Texas  
Round Rock  
Dell Inc.  
Remote Access Group  
iDRAC6 default certificate  
Jul 8 16:21:56 2005 GMT  
Jul 7 16:21:56 2010 GMT  
132  
RACADM Subcommand Details  
sslcsrgen  
NOTE: To use this subcommand, you must have Configure iDRAC permission.  
Subcommand Description  
sslcsrgen  
Can be used to generate a CSR and download the file to the client’s  
local file system. The CSR can be used for creating a custom SSL  
certificate that can be used for SSL transactions on iDRAC6.  
Synopsis  
racadm sslcsrgen [-g] [-f <filename>]  
racadm sslcsrgen -s  
Table 2-42 describes the sslcsrgen subcommand options.  
NOTE: The -f option is not supported for the serial/Telnet/ssh console.  
Table 2-42. sslcsrgen Subcommand Options  
Option Description  
-g  
-s  
Generates a new CSR.  
Returns the status of a CSR generation process (generation in progress,  
active, or none).  
-f  
-t  
Specifies the filename of the location, <filename>, where the CSR is  
downloaded.  
Specifies the type of certificate to view, either the CA certificate or  
server certificate.  
1 = webserver CSR - enables you to generate a CSR for the  
webcertificate server certificate.  
2 = KMC certificate - enables you to generate a CSR for the KMC  
certificate and a CA certificate for Directory Service.  
NOTE: The current release does not support type 2.  
NOTE: If the -f option is not specified, the filename defaults to sslcsr in your current  
directory.  
RACADM Subcommand Details  
133  
     
If no options are specified, a CSR is generated and downloaded to the local  
file system as sslcsr by default. The -g option cannot be used with the -s  
option, and the -f option can only be used with the -g option.  
The sslcsrgen -s subcommand returns one of the following status codes:  
CSR was generated successfully.  
CSR does not exist.  
CSR generation in progress.  
NOTE: Before a CSR can be generated, the CSR fields must be configured in the  
RACADM cfgRacVirtual group. For example:  
racadm config -g cfgRacSecurity -o  
cfgRacSecCsrCommonName MyCompany  
NOTE: In telnet/ssh console, you can only generate and not download the CSR file.  
Examples  
racadm sslcsrgen -s  
or  
racadm sslcsrgen -g -f c:\csr\csrtest.txt  
sslkeyupload  
NOTE: To use this subcommand, you must have Configure iDRAC permission.  
Subcommand  
Description  
sslkeyupload  
Uploads SSL key from the client to iDRAC6.  
Synopsis  
racadm sslkeyupload -t <type> -f <filename>  
134  
RACADM Subcommand Details  
     
Table 2-43 describes the sslkeyupload subcommand options.  
Table 2-43. sslkeyupload Subcommand Options  
Option  
Description  
-t  
Specifies the key to upload.  
1 = SSL key used to generate the server certificate  
Specifies the file name of the SSL key to be uploaded.  
-f  
The sslkeyupload command returns 0when successful and returns a nonzero  
number when unsuccessful.  
Example  
racadm sslkeyupload -t 1 -f c:\sslkey.txt  
sslresetcfg  
NOTE: To use this subcommand, you must have Chassis Configuration  
Administrator privilege for CMC and Configure iDRAC permission for iDRAC.  
Subcommand Description  
sslresetcfg  
Restores the web-server certificate to factory default and restarts web-  
server. The certificate takes effect 30 seconds after the command is  
entered.  
Synopsis  
racadm sslresetcfg  
Example  
$ racadm sslresetcfg  
Certificate generated successfully and webserver  
restarted.  
NOTE: For more information on managing SSL certificates, see the “Securing CMC  
Communications Using SSL and Digital Certificates” section in the Dell Chassis  
Management Controller User Guide.  
RACADM Subcommand Details  
135  
       
testemail  
Subcommand Description  
testemail  
Sends a test e-mail from iDRAC6 to a specified destination. Prior to  
executing the test e-mail command, ensure that the SMTP server is  
configured and the specified index in the RACADM cfgEmailAlert  
group is enabled and configured properly. See "cfgEmailAlert" on  
page 176 for more information.  
Synopsis  
racadm testemail -i <index>  
Table 2-44 provides a list and associated commands for the cfgEmailAlert  
group.  
Table 2-44. testemail Configuration  
Action  
Command  
Enable the alert  
racadm config -g cfgEmailAlert -o  
cfgEmailAlertEnable -i 1 1  
Set the destination e-mail racadm config -g cfgEmailAlert -o  
address  
cfgEmailAlertAddress -i 1  
Set the custom message  
that is sent to the  
racadm config -g cfgEmailAlert -o  
cfgEmailAlertCustomMsg -i 1 "This is a  
destination e-mail address test!"  
Ensure that the SMTP IP racadm config -g cfgRemoteHosts -o  
address is configured  
properly  
cfgRhostsSmtpServerIpAddr 192.168.0.152  
View the current e-mail  
alert settings  
racadm getconfig -g cfgEmailAlert -i  
<index>  
where <index>is a number from 1 to 4  
136  
RACADM Subcommand Details  
       
Table 2-45 describes the testemail subcommand options.  
Table 2-45. testemail Subcommands  
Option  
Description  
-i  
Specifies the index of the e-mail alert to test.  
Output  
Success: Test e-mail sent successfully  
Failure: Unable to send test e-mail  
testfeature  
Subcommand Description  
testfeature  
Generic test command consisting of several sub-commands that allow  
you to verify the configuration and operation of specific features.  
Table 2-46 describes the testfeature subcommand options.  
Table 2-46. testfeature Subcommand Options  
Option  
Description  
-f  
Specifies the feature name. testfeature supports the following  
<feature>  
features:  
• ad Tests Active Directory configuration using simple  
authentication (user name and password)  
• adkrb Tests Active Directory configuration using Kerberos  
authentication  
• ldap Tests LDAP configuration and operation (requires user  
name and password)  
-u  
The user name specified in an appropriate format for the selected  
authentication method. That is, Active Directory users are  
specified as user_name@domain_name.  
<username>  
-p<password> The password for the indicated user account.  
RACADM Subcommand Details  
137  
         
Table 2-46. testfeature Subcommand Options  
Option Description  
-d <bitmask> A bitmask (specified as a hexadecimal value) to select various  
diagnostic messaging levels. This option is optional.  
NOTE: -d option is not supported with the remote racadm interface.  
Subcommands  
testfeature -f ad  
Synopsis  
testfeature -f ad -u <username> -p <password> [-d  
<diagnostic-message-level>]  
This subcommand tests Active Directory configuration using simple  
authentication (user name and password). Use the optional -dswitch to  
obtain additional diagnostic information, as needed.  
This subcommand when executed performs the following:  
Checks command syntax.  
Verifies whether the required system resources are available.  
Validates Active Directory configuration.  
Verifies the SSL certificate and if the certificate signing request (key)  
exists.  
Acquires LDAP and Global Catalog Service records from DNS.  
Acquires user privileges from the Active Directory server.  
Checks the time to acquire user privileges with the allotted time to login.  
NOTE: In the event of an error, the command displays the test that failed and all the  
the tests performed earlier to the test that failed, including all the error messages.  
Examples  
testfeature –f ad –u user@domain –p secret  
SUCCESSFUL: User permissions are xxxxxppp  
NOTE: The last three digits are the user's permissions.  
138  
RACADM Subcommand Details  
testfeature –f adkrb –u user_name@domain_name  
SUCCESSFUL: User permissions are 80000fff  
testfeature -f ldap -u harold -p barrel  
SUCCESSFUL: User permissions are 0x00000fff  
testfeature -f adkrb  
Synopsis  
testfeature -f adkrb -u <username> [-d <diagnostic-  
message-level>]  
This subcommand tests the Active Directory configuration using Kerberos  
authentication (single sign-on or Smart Card login). Use the optional -d  
switch to obtain additional diagnostic information, as needed. This  
subcommand when executed performs the following:  
Checks command syntax.  
Verifies if the required system resources are available.  
Validates Active Directory configuration.  
Verifies if the SSL certificate and certificate signing request (key) exists.  
Acquires LDAP and Global Catalog Service records from DNS.  
Verifies if the CMC can acquire CMC, LDAP and Global Catalog servers  
FQDN through reverse IP lookups.  
Verifies that the CMC principal name matches the principal name in the  
uploaded Keytab file.  
Verifies that the CMC acquires a Kerberos TGT.  
Acquires user privileges from the Active Directory server.  
Checks the time to acquire user privileges with the allotted time to login.  
NOTE: In the event of an error, the command outputs all tests performed up to and  
including the test that failed, as well as all error messages.  
RACADM Subcommand Details  
139  
testfeature -f ldap  
Synopsis  
testfeature -f ldap -u <username> -p <password> [-d  
<diagnostic-message-level>]  
This subcommand tests LDAP configuration and operation, and reports  
success as each stage of the authentication process proceeds. On successful  
completion, this command prints the CMC privileges assumed by the  
specified <username>.  
If a failure occurs, the command terminates with an error message that  
displays the required corrective action. Use the optional -d switch to obtain  
additional diagnostic information, as needed.  
testtrap  
NOTE: To use this subcommand, you must have Test Alerts permission.  
Subcommand Description  
testtrap  
Tests the RAC’s SNMP trap alerting feature by sending a test trap  
from iDRAC6 to a specified destination trap listener on the network.  
For iDRAC6 only, before you execute the testtrap subcommand, ensure that  
the specified index in the RACADM cfgIpmiPet group is configured properly.  
For more information, see "cfgIpmiPet" on page 237.  
Table 2-47 provides a list and associated commands for the cfgIpmiPet group.  
NOTE: The cfgIpmiPet group is applicable only for iDRAC6.  
.
Table 2-47. cfgIpmiPet Commands  
Action  
Command  
Enable the alert  
racadm config -g cfgIpmiPet -o  
cfgIpmiPetAlertEnable -i 1 1  
Set the destination  
e-mail IP address  
racadm config -g cfgIpmiPet -o  
cfgIpmiPetAlertDestIpAddr -i 1  
192.168.0.110  
140  
RACADM Subcommand Details  
       
Table 2-47. cfgIpmiPet Commands  
Action Command  
View the current test racadm getconfig -g cfgIpmiPet -i  
trap settings  
<index>  
where <index>is a number from 1 to 4  
Synopsis  
racadm testtrap -i <index>  
Table 2-48 describes the testtrap subcommand options.  
Table 2-48. testtrap Subcommand Options  
Option  
Description  
-i  
Specifies the index of the trap configuration to use for the test Valid  
values are from 1 to 4.  
traceroute  
NOTE: To use this subcommand, you must have Administrator permission.  
Subcommand  
Description  
traceroute  
Traces the network path of routers that packets take  
as they are forwarded from your system to a  
destination IPv4 address.  
Synopsis  
racadm traceroute <IPv4 address>  
racadm traceroute 192.168.0.1  
traceroute to 192.168.0.1 (192.168.0.1), 30 hops max,  
40 byte packets  
1 192.168.0.1 (192.168.0.1) 0.801 ms 0.246 ms 0.253 ms  
RACADM Subcommand Details  
141  
       
traceroute6  
NOTE: To use this subcommand, you must have Administrator permission.  
Subcommand  
Description  
traceroute6  
Traces the network path of routers that packets take  
as they are forwarded from your system to a  
destination IPv6 address.  
Synopsis  
racadm traceroute6 <IPv6 address>  
racadm traceroute fd01::1  
traceroute to fd01::1 (fd01::1) from fd01::3, 30 hops  
max, 16 byte packets  
1 fd01::1 (fd01::1) 14.324 ms 0.26 ms 0.244 ms  
usercertupload  
NOTE: To use this subcommand, you must have Configure iDRAC permission  
NOTE: This option is applicable only to iDRAC6..  
Subcommand  
Description  
usercertupload  
Uploads a user certificate or a user CA  
certificate from the client to iDRAC6.  
Synopsis  
racadm usercertupload -t <type> [-f <filename>] -i  
<index>  
Table 2-49 describes the usercertupload subcommand options.  
142  
RACADM Subcommand Details  
           
Table 2-49. usercertupload Subcommand Options  
Option  
Description  
-t  
Specifies the type of certificate to upload, either the CA certificate or  
server certificate.  
1 = user certificate  
2 = user CA certificate  
-f  
-i  
Specifies the file name of the certificate to be uploaded. If the file is  
not specified, the sslcert file in the current directory is selected.  
Index number of the user. Valid values 1-16.  
The usercertupload command returns 0when successful and returns a  
nonzero number when unsuccessful.  
Example  
racadm usercertupload -t 1 -f c:\cert\cert.txt -i 6  
RACADM Subcommand Details  
143  
 
usercertview  
NOTE: To use this subcommand, you must have Configure iDRAC permission.  
NOTE: This option is applicable only to iDRAC6.  
Subcommand  
Description  
usercertview  
Displays the user certificate or user CA  
certificate that exists on iDRAC6.  
Synopsis  
racadm usercertview -t <type> [-A] -i <index>  
Table 2-50 describes the sslcertview subcommand options.  
Table 2-50. sslcertview Subcommand Options  
Option  
Description  
-t  
Specifies the type of certificate to view, either the user certificate or  
the user CA certificate.  
1 = user certificate  
2 = user CA certificate  
-A  
-i  
Prevents printing headers/labels.  
Index number of the user. Valid values are 1-16.  
version  
NOTE: This option is applicable only for iDRAC6.  
Subcommand  
Description  
version  
Displays the RACADM version information.  
Synopsis  
racadm version  
144  
RACADM Subcommand Details  
           
vflashsd  
NOTE: To use this subcommand, you must have Access Virtual Media privilege  
NOTE: This option is applicable only to iDRAC6..  
Subcommand  
Description  
vflashsd  
Allows you to initialize or get the status of the vFlash SD card. The  
initialize operation removes all existing partitions and resets the  
card. The status operation displays the status of the last operation  
performed on the card.  
Synopsis  
racadm vflashsd initialize  
racadm vflashsd status  
vflashpartition  
NOTE: To use this subcommand, you must have Access Virtual Media privilege.  
NOTE: This option is applicable only to iDRAC6.  
Subcommand  
Description  
vflashpartition Allows you to perform the following:  
• Create an empty partition  
• Create a partition using an image file  
Format a partition  
• View available partitions  
• Delete existing partitions  
• Get the status of partitions  
NOTE: Create partition using image file is not supported in local RACADM.  
RACADM Subcommand Details  
145  
       
Synopsis  
racadm vflashpartition create <options>  
racadm vflashpartition delete <options>  
racadm vflashpartition status <options>  
racadm vflashpartition list <options>  
Table 2-51 describes the vflashpartition subcommand options.  
Table 2-51. vflashpartition Subcommand Options  
Option  
Description  
-i <index> Index of the partition for which this command applies.  
<index> must be an integer from 1 to 16.  
NOTE: For the standard SD card, the index value is 1 because only one  
partition of size 256 MB is supported.  
Options valid only with create action  
-o <label> Label that is displayed when the partition is mounted on the  
operating system.  
<label> must be a string up to six alphanumeric characters.  
-e <type> Emulation type for the partition. <type> must be floppy, cddvd, or  
HDD.  
146  
RACADM Subcommand Details  
 
Table 2-51. vflashpartition Subcommand Options (continued)  
Option Description  
-t <type> Create a partition of type <type>. <type> must be:  
• empty – Create an empty partition. The following options are valid  
with the empty type:  
• -s <size> – Partition size in MB.  
• -f <type> – Format type for the partition based on the type of  
file system. Valid options are RAW, FAT16, FAT32, EXT2, or  
EXT3.  
• image – Create a partition using an image relative to iDRAC. The  
following options are valid with the image type:  
• -l <path> – Specifies the remote path relative to iDRAC. The  
path can be on a mounted drive:  
SMB path: //<ip or domain>/<share_name> /<path_to_image  
>
NFS path: <ipaddress>:/<path_to_image  
>
• -u <user> – Username for accessing the remote image.  
• -p <password> – Password for accessing the remote image.  
Options valid only with status action  
-a  
Displays the status of operations on all existing partitions.  
Examples  
To create a 20MB empty partition:  
racadm vflashpartition create -i 1 -o drive1 -t  
empty -e HDD -f fat16 -s 20  
To create a partition using an image file on a remote system:  
racadm vflashpartition create –i 1 –o drive1 –e  
HDD –t image –l //myserver/sharedfolder/foo.iso –u  
root –p mypassword  
NOTE: This command is case sensitive for the image file name extension. If the file  
name extension is in upper case, for example FOO.ISO instead of FOO.iso,  
then the command returns a syntax error.  
To delete a partition:  
racadm vflashpartition delete -i 1  
RACADM Subcommand Details  
147  
To delete all partitions, re-initialize the vFlash SD card:  
racadm vflashsd initialize  
To get the status of operation on partition 1:  
racadm vflashpartition status -i 1  
To get the status of all existing partitions:  
racadm vflashpartition status -a  
To list all existing partitions and its properties:  
racadm vflashpartition list  
To get the partition size:  
racadm getconfig –g cfgvflashpartition –o  
cfgvflashpartitionsize –i 1  
To display the emulation type:  
racadm getconfig –g cfgvflashpartition –I 1 –o  
cfgvflashpartitionemulatiotype  
To display the label for the partition that is visible to the operating system:  
racadm getconfig –g cfgvflashpartition –i 1 –o  
cfgvflashPartitionlabel  
To display the format type of the partition:  
racadm getconfig –g cfgvflashpartition –i 1 –o  
cfgvflashPartitionFormatType  
To change a read-only partition to read-write:  
racadm config –g cfgvflashpartition –i 1 –o  
cfgvflashPartitionAccessType 1  
To attach a partition to the host operating system:  
racadm config –g cfgvflashpartition –i 1 –o  
cfgvflashPartitionAttachState 1  
148  
RACADM Subcommand Details  
vmdisconnect  
NOTE: To use this subcommand, you must have Access Virtual Media permission.  
NOTE: This option is applicable only to iDRAC6.  
Subcommand Description  
vmdisconnect Allows a user to disconnect another user's Virtual Media session. Once  
disconnected, the Web-based interface reflects the correct connection  
status.  
Enables a iDRAC6 user to disconnect all active Virtual Media  
sessions. The active Virtual Media sessions can be displayed in  
iDRAC6 Web-based interface or by using the RACADM  
subcommands such as remoteimage or getssninfo.  
Synopsis  
racadm vmdisconnect  
vmkey  
NOTE: To use this subcommand, you must have Access Virtual Media permission  
NOTE: This option is applicable only to iDRAC6..  
Subcommand Description  
vmkey  
When a custom Virtual Media key image is uploaded to the RAC, the  
key size becomes the image size. The vmkey subcommand can be  
used to reset the key back to its original default size, which is 256 MB  
on iDRAC6.  
RACADM Subcommand Details  
149  
         
Synopsis  
racadm vmkey <action>  
If <action>is configured as reset, the vFlash memory is reset to the  
default size of 256 MB and removes all data from it.  
NOTE: This command is deprecated from iDRAC6 1.5 and iDRAC6 3.0 releases  
onwards. The functionality of this command is now covered by vflashsd  
initialize. While execution of the vmkey resetcommand is  
successful, it is recommended to use the vflashsd initialize  
command. For more information, see "vflashsd" on page 145.  
150  
RACADM Subcommand Details  
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
3
iDRAC6 and CMC Property  
Database Group and Object  
Descriptions  
The iDRAC6 and CMC property database contains the configuration  
information for iDRAC6 and CMC. Data is organized by associated object,  
and objects are organized by object group. The IDs for the groups and objects  
that the property database supports are listed in this section for iDRAC6  
Enterprise on Blade Servers, iDRAC6 Enterprise or Express on Rack and  
Tower Servers and CMC.  
Use the group and object IDs with the RACADM subcommands to configure  
iDRAC6 and CMC.  
Table 3-1 provides an overview of the object groups applicable for iDRAC6  
Enterprise on Blade Servers, iDRAC6 on Rack and Tower Servers and CMC.  
CAUTION: Racadm sets the value of objects without performing any functional  
validation on them. For example, RACADM allows you to set the Certificate  
Validation object to 1 with the Active Directory object set to 0, even though  
Certificate Validation can happen only if Active Directory is enabled. Similarly, the  
cfgADSSOEnable object can be set to 0 or 1 even if the cfgADEnable object is 0,  
but it takes effect only if Active Directory is enabled.  
All string values are limited to displayable ASCII characters, except where  
otherwise noted.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
151  
 
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
Displayable Characters  
Displayable characters include the following set:  
abcdefghijklmnopqrstuvwxwz  
ABCDEFGHIJKLMNOPQRSTUVWXYZ  
0123456789~`!@#$%^&*()_+-={}[]|\:";'<>,.?/  
Table 3-1 lists the supported object groups.  
Table 3-1. Supported Object Groups  
Subcommand  
iDRAC6 on Blade iDRAC6 on Rack  
Servers and Tower Servers  
CMC  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
152  
iDRAC6 and CMC Property Database Group and Object Descriptions  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
Table 3-1. Supported Object Groups (continued)  
Subcommand  
iDRAC6 on Blade iDRAC6 on Rack  
Servers and Tower Servers  
CMC  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
153  
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
Table 3-1. Supported Object Groups (continued)  
Subcommand  
iDRAC6 on Blade iDRAC6 on Rack  
Servers and Tower Servers  
CMC  
= Supported;  
=Not supported  
idRacInfo  
This group contains display parameters to provide information about the  
specifics of iDRAC6 or CMC being queried. One instance of the group is  
allowed.  
NOTE: For CMC, use this object with the getconfig subcommand.  
NOTE: To use this object for CMC, you must have CMC Login User privilege.  
The following sections provides information about the objects in the  
idRACInfo group.  
idRacProductInfo (Read Only)  
Description  
A text string that identifies the product.  
A string of up to 63 ASCII characters.  
Integrated Dell Remote Access Controller.  
Chassis Management Controller.  
Legal Values  
Default for iDRAC  
Default for CMC  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
154  
iDRAC6 and CMC Property Database Group and Object Descriptions  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
idRacDescriptionInfo (Read Only)  
Description  
Legal Values  
Default  
A text description of the RAC type.  
A string of up to 255 ASCII characters.  
This system component provides a complete set of remote  
management functions for Dell PowerEdge servers.  
idRacVersionInfo (Read Only)  
Description  
Legal Values  
Default  
String containing the current product firmware version.  
A string of up to 63 ASCII characters.  
The current version number.  
idRacBuildInfo (Read Only)  
Description  
String containing the current RAC firmware build version.  
Legal Values  
A string of up to 16 ASCII characters.  
Default for iDRAC  
Default for CMC  
The current iDRAC6 firmware build version.  
The current CMC firmware build version.  
idRacName (Read Only)  
Description  
A user-assigned name to identify this controller.  
Legal Values  
A string of up to 15 ASCII characters.  
Default for iDRAC  
Default for CMC  
iDRAC  
CMC  
idRacType (Read Only)  
Description  
Legal Values  
Default  
Identifies the remote access controller type as iDRAC6.  
Product ID  
For iDRAC6 on Rack and Servers: 10  
For iDRAC6 Enterprise on Blade Servers: 8  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
155  
         
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
Example  
racadm getconfig -g idRacInfo  
# idRacType=8  
# idRacProductInfo=Chassis Management Controller  
# idRacDescriptionInfo=This system component provides  
a complete set of remote management functions for  
blade servers  
# idRacVersionInfo=P21  
# idRacBuildInfo=200708301525  
# idRacName=CMC-1  
cfgLanNetworking  
This group contains parameters to configure iDRAC6 or CMC NIC.  
One instance of the group is allowed. Some objects in this group may require  
iDRAC6 NIC to be reset, which may cause a brief loss in connectivity. Objects  
that change iDRAC6 NIC IP address settings closes all active user sessions  
and require users to reconnect using the updated IP address settings.  
NOTE: For CMC, use this object with the config or getconfig subcommands.  
NOTE: To use this object property for CMC, you must have Chassis Configuration  
Administrator privilege.  
NOTE: For CMC, you can configure any setting that is not preceded by the hash  
sign (#) in the output. To modify a configurable object, use the -o option.  
NOTE: For any network property changes on iDRAC6 to be successfully executed  
through RACADM, you must first enable iDRAC6 NIC.  
The following sections provides information about the objects in the  
cfgLanNetworking group.  
cfgNicIPv4Enable (Read/Write)  
Description Enables or disables iDRAC6 or CMC IPv4 stack.  
Legal Values 1 (TRUE)  
0 (FALSE)  
Default  
1
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
156  
iDRAC6 and CMC Property Database Group and Object Descriptions  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgNicSelection (Read/Write)  
NOTE: This object is applicable only for iDRAC6 on Rack and Tower Servers and  
not for iDRAC6 Enterprise on Blade Servers or CMC.  
Description Specifies the current mode of operation for the RAC network interface  
controller (NIC). Table 3-2 describes the supported modes.  
Legal Values 0 = Shared  
1 = Shared with Failover LOM2  
2 = Dedicated  
3 = Shared with Failover All LOMs (iDRAC6 Enterprise only)  
Default  
0 (iDRAC6 Express)  
2 (iDRAC6 Enterprise)  
Table 3-2 lists the supported cfgNicSelection modes.  
Table 3-2. cfgNicSelection Supported Modes  
Mode  
Description  
Shared  
Used if the host server integrated NIC is shared with the  
RAC on the host server. This mode enables  
configurations to use the same IP address on the host  
server and the RAC for common accessibility on the  
network.  
Shared with Failover:  
LOM 2  
Enables teaming capabilities between host server LOM2  
integrated network interface controllers.  
Dedicated  
Specifies that the RAC NIC is used as the dedicated  
NIC for remote accessibility.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
157  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
Table 3-2. cfgNicSelection Supported Modes (continued)  
Mode  
Description  
Shared with Failover All Enables teaming capabilities between all LOMs on the  
LOMs  
host server integrated network interface controllers.  
The remote access device network interface is fully  
functional when the host operating system is configured  
for NIC teaming. The remote access device receives data  
through NIC 1 and NIC 2, but transmits data only  
through NIC 1.  
Failover occurs from NIC 2 to NIC 3 and then to NIC 4.  
If NIC 4 fails, the remote access device fails over all data  
transmission back to NIC 1, but only if the original NIC  
1 failure has been corrected.  
cfgNicVLanEnable (Read/Write)  
NOTE: For iDRAC6 Enterprise on Blade Servers, this object is read-only and VLAN  
settings can be configured through CMC Web Interface. iDRAC6 displays only the  
current VLAN settings and you cannot modify the settings from iDRAC6.  
Description  
Enables or disables the VLAN capabilities of the RAC/BMC.  
NOTE: For iDRAC6 Enterprise on Blade Servers, this object enables  
or disables the VLAN capabilities of iDRAC6 from CMC.  
All chassis management traffic, including the CMC and all  
iDRACs, resides on this external VLAN when enabled. No iDRAC  
configuration change is required to use this external management  
network VLAN.  
Legal Values  
1 (TRUE)  
0 (FALSE)  
0
Default  
Example  
racadm config -g cfgLanNetworking -o  
cfgNicVLanEnable 1  
racadm config -g cfgLanNetworking -o  
cfgNicVLanEnable 0  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
158  
iDRAC6 and CMC Property Database Group and Object Descriptions  
 
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgNicVLanId (Read/Write)  
Description  
Specifies the VLAN ID for the network VLAN configuration (in  
CMC for iDRAC6 Enterprise on Blade Servers). This property is only  
valid if cfgNicVLanEnable is set to 1 (enabled).  
Legal Values  
Default  
1 – 4000 and 4021 – 4094  
1
Example  
racadm config -g cfgLanNetworking -o  
cfgNicVlanID 1  
cfgNicVLanPriority (Read/Write)  
Description  
Specifies the VLAN Priority for the network VLAN configuration  
(in CMC for iDRAC6 Enterprise on Blade Servers). This property is  
only valid if cfgNicVLanEnable is set to 1 (enabled).  
Legal Values  
Default  
0-7  
0
Example  
racadm config -g cfgLanNetworking -o  
cfgNicVLanPriority 7  
cfgDNSDomainNameFromDHCP (Read/Write)  
Description  
Legal Values  
Specifies that iDRAC or CMC DNS domain name should be  
assigned from the network DHCP server.  
1 (TRUE)  
0 (FALSE)  
0
Default  
For CMC, this property is used only if cfgNicUseDhcp is set to 1 (true), or if  
both cfgIPv6Enable and cfgIPv6AutoConfig are set to 1 (true).  
The CMC can obtain its DNS domain name from either a DHCP or  
DHCPv6 server, if all of the following properties are set to 1 (true):  
cfgNicIPv4Enable  
cfgNicUseDhcp  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
159  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgIPv6Enable  
cfgIPv6AutoConfig  
cfgDNSDomainNameFromDHCP  
cfgDNSDomainName (Read/Write)  
The network administrator must ensure that these DHCP servers are  
configured to provide the same DNS domain name to the CMC, otherwise  
the domain name becomes unpredictable.  
cfgDNSDomainName (Read/Write)  
Description  
Legal Values  
This is the DNS domain name. This parameter is only valid if  
cfgDNSDomainNameFromDHCP is set to 0 (FALSE).  
A string of up to 254 ASCII characters. At least one of the  
characters must be alphabetic. Characters are restricted to  
alphanumeric, '-', and '.'.  
NOTE: Microsoft Active Directory only supports Fully Qualified  
Domain Names (FQDN) of 64 bytes or fewer.  
Default  
<blank>  
cfgDNSRacName (Read/Write)  
Description  
Displays the iDRAC6 or CMC name, which is rac-service tag by  
default. This parameter is only valid if cfgDNSRegisterRac is set to  
1 (TRUE).  
Legal Values  
A string of up to 63 ASCII characters. At least one character must  
be alphabetic.  
NOTE: Some DNS servers only register names of 31 characters or  
fewer.  
Default  
For iDRAC: idrac-<service tag>  
For CMC: cmc-<service tag>  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
160  
iDRAC6 and CMC Property Database Group and Object Descriptions  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgDNSRegisterRac (Read/Write)  
Description  
Registers the iDRAC6 or CMC name on the DNS server. When you  
set this parameter, the CMC registers its DNS name for its IPv4  
and IPv6 addresses with the DNS server.  
Legal Values  
Default  
1 (TRUE)  
0 (FALSE)  
0
NOTE: For IPv6, only the DHCPv6 address or static address is registered.  
Example:  
racadm getconfig -g cfgLanNetworking  
cfgNicEnable=1  
cfgNicIPv4Enable=1  
cfgNicIpAddress=192.168.22.101  
cfgNicNetmask=255.255.255.0  
cfgNicGateway=192.168.22.101  
cfgNicUseDhcp=1  
# cfgNicMacAddress=00:00:00:00:00:01  
cfgNicVLanEnable=0  
cfgNicVLanID=1  
cfgNicVLanPriority=0  
cfgDNSServersFromDHCP=1  
cfgDNSServer1=192.168.0.5  
cfgDNSServer2=192.168.0.6  
cfgDNSRacName=cmc-frankly  
cfgDNSDomainName=fwad.lab  
cfgDNSDomainNameFromDHCP=1  
cfgDNSRegisterRac=1  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
161  
 
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgDNSServersFromDHCP (Read/Write)  
Description  
Specifies if the DNS server IPv4 addresses should be assigned from  
the DHCP server on the network.  
For CMC, this property is used only if cfgNicUseDhcp is set to 1  
(true).  
Legal Values  
Default  
1 (TRUE)  
0 (FALSE)  
0
cfgDNSServer1 (Read/Write)  
Description  
Specifies the IPv4 address for DNS server 1. This property is only  
valid if cfgDNSServersFromDHCP is set to 0 (FALSE).  
NOTE: cfgDNSServer1 and cfgDNSServer2 may be set to identical  
values while swapping addresses.  
Legal Values  
Default  
String representing a valid IPv4 address. For example: 192.168.0.20.  
0.0.0.0  
cfgDNSServer2 (Read/Write)  
Description  
Retrieves the IPv4 address for DNS server 2. This parameter is only  
valid if cfgDNSServersFromDHCP is set to 0 (FALSE).  
NOTE: cfgDNSServer1 and cfgDNSServer2 may be set to identical  
values while swapping addresses.  
Legal Values  
Default  
String representing a valid IPv4 address. For example: 192.168.0.20.  
0.0.0.0  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
162  
iDRAC6 and CMC Property Database Group and Object Descriptions  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgNicEnable (Read/Write)  
Description  
Enables or disables iDRAC6 or CMC network interface controller.  
If the NIC is disabled, the remote network interfaces to iDRAC6 or  
CMC are no longer accessible and iDRAC6 or CMC are only  
available through the local or serial RACADM interface.  
Legal Values  
Default  
1 (TRUE)  
0 (FALSE)  
1
cfgNicIpAddress (Read/Write)  
NOTE: This parameter is only configurable if the cfgNicUseDhcp parameter is set  
to 0(FALSE).  
Description  
Specifies the static IPv4 address to be assigned to the RAC or CMC.  
This property is only valid if cfgNicUseDhcp is set to 0 (FALSE).  
Legal Values  
Default  
String representing a valid IPv4 address. For example: 192.168.0.20.  
For iDRAC6 on Rack and Tower Servers: 192.168.0.120  
For iDRAC6 Enterprise on Blade Servers: 192.168.0.n, where n is 120  
plus the server slot number.  
For CMC: 192.168.0.120  
cfgNicNetmask (Read/Write)  
NOTE: This parameter is only configurable if the cfgNicUseDhcp parameter is set  
to 0 (FALSE).  
Description  
The subnet mask used for iDRAC6 or CMC IP address.  
This property is only valid if cfgNicUseDhcp is set to 0 (FALSE).  
Legal Values  
Default  
String representing a valid subnet mask. For example:  
255.255.255.0.  
255.255.255.0  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
163  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgNicGateway (Read/Write)  
NOTE: This parameter is only configurable if the cfgNicUseDhcp parameter is set  
to 0 (FALSE).  
Description  
iDRAC6 or CMC gateway IPv4 address.  
The gateway IPv4 address used for static assignment of the RAC IP  
address. This property is only valid if cfgNicUseDhcp is set to 0  
(FALSE).  
Legal Values  
Default  
String representing a valid gateway IPv4 address. For example:  
192.168.0.1.  
192.168.0.1  
cfgNicUseDhcp (Read/Write)  
Description  
Specifies whether DHCP is used to assign the iDRAC6 or CMC  
IPv4 address. If this property is set to 1 (TRUE), then iDRAC6 or  
CMC IPv4 address, subnet mask, and gateway are assigned from  
the DHCP server on the network. If this property is set to 0  
(FALSE), the user can configure the cfgNicIpAddress,  
cfgNicNetmask, and cfgNicGateway properties.  
Legal Values  
Default  
1 (TRUE)  
0 (FALSE)  
0
cfgNicMacAddress (Read Only)  
Description  
The iDRAC6 or CMC NIC MAC address in the format:  
dd:dd:dd:dd:dd:dd, where d is a hexadecimal digit in range 0 - 9, A -  
F
Legal Values  
Default  
String representing iDRAC6 or CMC NIC MAC address.  
The current MAC address of iDRAC6 or CMC NIC. For example,  
00:12:67:52:51:A3.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
164  
iDRAC6 and CMC Property Database Group and Object Descriptions  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgRemoteHosts  
This group provides properties that allow configuration of the SMTP server  
for e-mail alerts.  
For CMC, this group enables/disables and configures firmware updates, NTP,  
remote syslogging, and SMTP email alerting. Use the -m option to apply this  
setting to iDRAC.  
NOTE: Use this object with the config or getconfig subcommands.  
NOTE: To use this object property for CMC, you must have Chassis Configuration  
Administrator privilege.  
The following sections provides information about the objects in the  
cfgRemoteHosts group.  
cfgRhostsFwUpdateTftpEnable (Read/Write)  
Description  
Legal Values  
Enables or disables iDRAC6 or CMC firmware update from a  
network TFTP server.  
1 (TRUE)  
0 (FALSE)  
1
Default  
cfgRhostsFwUpdateIpAddr (Read/Write)  
Description  
Legal Values  
Default  
Specifies the network TFTP server IPv4 or IPv6 address that is used  
for TFTP iDRAC6 or CMC firmware update operations.  
A string representing a valid IPv4 or IPv6 address. For example,  
192.168.0.61  
For IPv4, it is 0.0.0.0  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
165  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgRhostsFwUpdatePath (Read/Write)  
Description  
Specifies TFTP path where iDRAC6 or CMC firmware image file  
exists on the TFTP server. The TFTP path is relative to the TFTP  
root path on the TFTP server.  
NOTE: The server may still require you to specify the drive (for  
example, C:).  
Legal Values  
Default  
A string with a maximum length of 255 ASCII characters.  
<blank>  
cfgRhostsSmtpServerIpAddr (Read/Write)  
Description  
The IPv4 or IPv6 address of the network SMTP server. The SMTP  
server transmits e-mail alerts from iDRAC6 or CMC if the alerts are  
configured and enabled.  
Legal Values  
Default  
A string representing a valid SMTP server IPv4 or IPv6 address. For  
example: 192.168.0.55.  
For iDRAC6: For IPv4, it is 0.0.0.0  
For CMC: localhost.localdomain  
cfgRhostsNtpEnable  
NOTE: This object is applicable only for CMC.  
Description  
Enables or disables the use of the Network Time Protocol (NTP) for  
date and time synchronization.  
Legal Values  
1 (true)  
0 (false)  
0
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
166  
iDRAC6 and CMC Property Database Group and Object Descriptions  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgRhostsNtpServer1  
NOTE: This object is applicable to CMC only.  
Description  
Legal Values  
Specifies the first of three possible NTP servers.  
A string representing a valid NTP server. For example, ntp1.ntp.net.  
At least one NTP server must be specified and duplicate entries are  
not allowed.  
Default  
Null  
cfgRhostsNtpServer2  
NOTE: This object is applicable only for CMC.  
Description  
Legal Values  
Specifies the second of three possible NTP servers.  
A string representing a valid NTP server. For example, ntp2.ntp.net.  
At least one NTP server must be specified and duplicate entries are  
not allowed.  
Default  
Null  
cfgRhostsNtpServer3  
NOTE: This object is applicable only for CMC.  
Description  
Legal Values  
Specifies the third of three possible NTP servers.  
A string representing a valid NTP server. For example, ntp3.ntp.net.  
At least one NTP server must be specified and duplicate entries are  
not allowed.  
Default  
Null  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
167  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgRhostsNtpMaxDist  
NOTE: This object is applicable only for CMC.  
Description  
Specifies the NTP maximum distance parameter used to aid in  
NTP configuration.  
Legal Values  
Default  
1 – 128  
16  
cfgRhostsSyslogEnable (Read/Write)  
Description  
Legal Values  
Enables or disables remote syslog to allow the RAC and SEL logs to  
be written to up to three remote syslog servers.  
1 (TRUE)  
0 (FALSE)  
0
Default  
cfgRhostsSyslogPort (Read/Write)  
Description  
Remote syslog port number to use for writing the RAC and SEL  
logs to a remote syslog server.  
For CMC, this setting takes effect only if the  
cfgRhostsSyslogEnable parameter is set to 1 (enabled).  
Legal Values  
Default  
10 — 65535  
514  
NOTE: For CMC, the following port numbers are reserved and cannot be used: 21,  
68, 69, 123, 161, 546, 801, 4096, 5988, 5989, 6900, 9000, 60106.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
168  
iDRAC6 and CMC Property Database Group and Object Descriptions  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgRhostsSyslogServer1 (Read/Write)  
Description  
Specifies the first of three possible remote syslog servers to store the  
RAC and SEL logs.This property is only valid if  
cfgRhostsSyslogEnable is set to 1 (enabled).  
Legal Values  
Default  
For iDRAC6: String from 0 to 511 characters.  
For CMC: Valid hostname or IPv4 or IPv6 address.  
<blank>  
cfgRhostsSyslogServer2 (Read/Write)  
Description  
Specifies the second of three possible remote syslog servers to store  
the RAC and SEL logs.. This property is only valid if  
cfgRhostsSyslogEnable is set to 1 (enabled).  
Legal Values  
Default  
For iDRAC6: String from 0 to 511 characters.  
For CMC: Valid hostname or IPv4 or IPv6 address.  
<blank>  
cfgRhostsSyslogServer3 (Read/Write)  
Description  
Specifies the third of three possible remote syslog servers to store  
the RAC and SEL logs.This property is only valid if  
cfgRhostsSyslogEnable is set to 1 (enabled).  
Legal Values  
Default  
For iDRAC6: String from 0 to 511 characters.  
For CMC: Valid hostname or IPv4 or IPv6 address.  
<blank>  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
169  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgRhostsSyslogPowerLoggingEnabled  
NOTE: This object is applicable only for CMC.  
Description  
Legal Values  
Enables or disables power consumption logging to remote syslog  
servers.  
1 (enabled)  
0 (disabled)  
0
Default  
NOTE: Remote syslog must be enabled and one or more remote syslog servers  
configured for power consumption to be logged.  
cfgRhostsSyslogPowerLoggingInterval  
NOTE: This object is applicable only for CMC.  
Description  
Legal Values  
Default  
Specifies the power consumption collection/logging interval.  
1-1440 (minutes)  
5
Example  
racadm getconfig -g cfgRemoteHosts [-m server-<n>]  
cfgRhostsFwUpdateTftpEnable=1  
cfgRhostsFwUpdateIpAddr=0.0.0.0  
cfgRhostsFwUpdatePath=  
cfgRhostsSmtpServerIpAddr=localhost.localdomain  
cfgRhostsNtpEnable=0  
cfgRhostsNtpServer1=  
cfgRhostsNtpServer2=  
cfgRhostsNtpServer3=  
cfgRhostsNtpMaxDist=16  
cfgRhostsSyslogEnable=0  
cfgRhostsSyslogPort=514  
cfgRhostsSyslogServer1=  
cfgRhostsSyslogServer2=  
cfgRhostsSyslogServer3=cfgRhostsSyslogPowerLoggingEnabled=1  
cfgRhostsSyslogPowerLoggingInterval=5  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
170  
iDRAC6 and CMC Property Database Group and Object Descriptions  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgUserAdmin  
This group provides configuration information about the users who are  
allowed to access iDRAC6 or CMC through the available remote interfaces.  
Up to 16 instances of the user group are allowed. Each instance represents the  
configuration for an individual user.  
NOTE: In the current CMC firmware version, the objects cfgUserAdminEnable and  
cfgUserAdminPrivilege are interrelated; changing the value of one property causes  
the value of the other property to change. For example, if a user does not have login  
privilege, the user is disabled by default. When you enable the user by changing the  
value of UserAdminEnable to 1, the right most digit of the UserAdminPrivilege also  
becomes 1. On the other hand, if you change the right most digit of the  
UserAdminPrivilege to 0, the value of UserAdminEnable becomes 0.  
NOTE: Use this object with the config or getconfig subcommands. You must supply  
an index group number to use these commands as follows: -i <index group>  
NOTE: To use this object property for CMC, you must have Chassis Configuration  
Administrator privilege.  
NOTE: For CMC, you can configure any setting that is not preceded by the hash  
sign (#) in the output. To modify a configurable object, use the -o option.  
The following sections provide information about the objects in the  
cfgUserAdmin group.  
cfgUserAdminIndex (Read Only)  
Description  
The unique index of a user.  
For CMC, the index number is used to specify a unique group  
name. Only valid for indexed groups.  
Legal Values  
For iDRAC6: This parameter is populated based on the existing  
instances.  
For CMC: The parameter is specified by a decimal integer from  
1–16.  
Default  
<index of the instance>  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
171  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgUserAdminIpmiLanPrivilege (Read/Write)  
NOTE: This object property is specific to iDRAC6.  
Description  
Legal Values  
The maximum privilege on the IPMI LAN channel.  
2 (User)  
3 (Operator)  
4 (Administrator)  
15 (No access)  
4 (User 2)  
Default  
15 (All others)  
cfgUserAdminPrivilege (Read/Write)  
Description  
This property specifies the role-based authority privileges allowed  
for the user. The value is represented as a bit mask that allows for  
any combination of privilege values. Table 3-3 describes the user  
privilege bit values that can be combined to create bit masks.  
Legal Values  
For iDRAC6: 0x00000000 to 0x000001ff, and 0x0  
For CMC: 0x0000000-0x0000fff, and 0x0  
0x00000000  
Default  
Example  
racadm getconfig -g cfgUserAdmin -i 1  
# cfgUserAdminIndex=1  
cfgUserAdminEnable=1  
cfgUserAdminUserName=root  
# cfgUserAdminPassword=******** (Write-Only)  
cfgUserAdminPrivilege=0x00000fff  
Table 3-3 lists the bit masks for user priveleges.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
172  
iDRAC6 and CMC Property Database Group and Object Descriptions  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
Table 3-3. Bit Masks for User Privileges  
iDRAC Specific User Privilege  
Login to iDRAC  
Privilege Bit Mask  
0x00000001  
0x00000002  
0x00000004  
0x00000008  
0x00000010  
Configure iDRAC  
Configure Users  
Clear Logs  
Execute Server Control  
Commands  
Access Virtual Console  
Access Virtual Media  
Test Alerts  
0x00000020  
0x00000040  
0x00000080  
0x00000100  
Execute Debug Commands  
CMC Specific User Privelege  
CMC Login User  
0x0000001  
0x0000002  
Chassis Configuration  
Administrator  
User Configuration Administrator 0x0000004  
Clear Logs Administrator  
Chassis Control Administrator  
Super User  
0x0000008  
0x0000010  
0x0000020  
0x0000040  
0x0000080  
Server Administrator  
Test Alert User  
Debug Command Administrator 0x0000100  
Fabric A Administrator  
Fabric B Administrator  
Fabric C Administrator  
0x0000200  
0x0000400  
0x0000800  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
173  
 
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
Examples  
Table 3-4 provides sample privilege bit masks for users with one or more  
privileges.  
Table 3-4. Sample Bit Masks for User Privileges  
User Privilege(s)  
Privilege Bit Mask  
The user is not allowed to access 0x00000000  
iDRAC or CMC.  
The user may only login to  
iDRAC or CMC and view iDRAC  
or CMC and server configuration  
information.  
0x00000001  
The user may login to iDRAC or 0x00000001 + 0x00000002 = 0x00000003  
CMC and change configuration.  
The user may login to iDRAC,  
0x00000001 + 0x00000040 + 0x00000080 =  
access Virtual Media, and access 0x000000C1  
Virtual Console.  
cfgUserAdminUserName (Read/Write)  
Description  
The name of the user for this index. The user index is created by  
writing a string into this name field if the index is empty. Writing a  
string of double quotes ("") deletes the user at that index. You  
cannot change the name. You must delete and then recreate the  
name. The string cannot contain / (forward slash), \ (backslash), .  
(period), @ (at symbol) or quotation marks.  
NOTE: This property value must be unique among user names.  
A string of up to 16 ASCII characters.  
root (User 2)  
Legal Values  
Default  
<blank> (All others)  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
174  
iDRAC6 and CMC Property Database Group and Object Descriptions  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgUserAdminPassword (Write Only)  
Description  
The password for this user. User passwords are encrypted and  
cannot be seen or displayed after the property is written.  
Legal Values  
Default  
A string of up to 20 ASCII characters.  
********  
cfgUserAdminEnable (Read/Write)  
Description  
Legal Values  
Enables or disables an individual user.  
1 (TRUE)  
0 (FALSE)  
Default  
For iDRAC6: 1 (User 2), 0 (All others)  
For CMC: 0  
cfgUserAdminSolEnable (Read/Write)  
NOTE: This object property is specific to iDRAC6.  
Description  
Legal Values  
Enables or disables Serial Over LAN (SOL) user access for the user.  
1 (TRUE)  
0 (FALSE)  
0
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
175  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgUserAdminIpmiSerialPrivilege (Read/Write)  
NOTE: This object is applicable only for iDRAC6 on Rack and Tower Servers and  
not for iDRAC6 Enterprise on Blade Servers or CMC.  
Description  
Legal Values  
The maximum privilege on the IPMI LAN channel.  
2 (User)  
3 (Operator)  
4 (Administrator)  
15 (No access)  
4 (User 2)  
Default  
15 (All others)  
cfgEmailAlert  
This group contains parameters to configure iDRAC6 or CMC e-mail alerting  
capabilities. Up to four instances of this group are allowed.  
NOTE: Use this object with the config or getconfig subcommands.  
NOTE: To use this object property for CMC, you must have Chassis Configuration  
Administrator privileges.  
NOTE: For CMC, you can configure any setting that is not preceded by the hash  
sign (#) in the output. To modify a configurable object, use the -o option.  
The following sections provides information about the objects in the  
cfgEmailAlert group.  
cfgEmailAlertIndex (Read Only)  
Description  
Legal Values  
Default  
The unique index of an alert instance.  
1-4  
<instance>  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
176  
iDRAC6 and CMC Property Database Group and Object Descriptions  
         
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgEmailAlertEnable (Read/Write)  
Description  
Legal Values  
Enables or disables the alert instance.  
1 (TRUE)  
0 (FALSE)  
0
Default  
cfgEmailAlertAddress (Read/Write)  
Description  
Legal Values  
Default  
Specifies the destination email address for email alerts, for example,  
user1@company.com.  
E-mail address format, with a maximum length of 64 ASCII  
characters.  
<blank>  
cfgEmailAlertCustomMsg (Read/Write)  
NOTE: This object property is specific to iDRAC6.  
Description  
Legal Values  
Default  
Specifies a custom message that forms the subject of the alert.  
A string of up to 32 characters  
<blank>  
cfgEmailAlertEmailName  
NOTE: This object property is specific to CMC.  
Description  
Specifies name or other identifier associated with the destination e-  
mail address. The e-mail name can refer to an individual, group,  
location, department, etc.  
Legal Values  
Default  
A string of up to 32 characters  
<blank>  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
177  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
Example  
racadm getconfig -g cfgEmailAlert -i 2  
# cfgEmailAlertIndex=1  
cfgEmailAlertEnable=1  
cfgEmailAlertName=Kevin Fulton  
cfgSessionManagement  
This group contains parameters to configure the number of sessions that can  
connect to iDRAC6. One instance of the group is allowed. Displays current  
settings for and configures idle timeout properties for Web server, Telnet,  
SSH, and RACADM sessions. Changes to idle timeout settings take effect at  
the next login. To disable idle timeout for a connection, set this property to 0.  
Use the -m option to apply this setting to iDRAC.  
The following sections provides information about the objects in the  
cfgSessionManagement group.  
cfgSsnMgtRacadmTimeout (Read/Write)  
NOTE: This object is applicable for iDRAC6 on Rack and Tower Servers and CMC,  
but not for iDRAC6 Enterprise on Blade Servers.  
Description  
Defines the idle timeout in seconds for the Remote RACADM  
interface. If a remote RACADM session remains inactive for more  
than the specified sessions, the session closes.  
Legal Values  
Default  
10 –1920  
60  
Example  
racadm getconfig -g cfgSessionManagement [-m server-  
<n>] -o <object name> <object value>  
cfgSsnMgtWebserverTimeout=0  
cfgSsnMgtTelnetIdleTimeout=0  
cfgSsnMgtSshIdleTimeout=300  
cfgSsnMgtRacadmTimeout=0  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
178  
iDRAC6 and CMC Property Database Group and Object Descriptions  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgSsnMgtConsRedirMaxSessions (Read/Write)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Specifies the maximum number of Virtual Console sessions allowed  
on iDRAC6.  
For iDRAC6 on Rack and Tower Servers: 1 – 4.  
For iDRAC6 Enterprise on Blade Servers: 1-2  
For iDRAC6 on Rack and Tower Servers: 4  
For iDRAC6 Enterprise on Blade Servers: 2  
Default  
cfgSsnMgtWebserverTimeout (Read/Write)  
Description  
Defines the Web server timeout. This property sets the amount of  
time in seconds that a connection is allowed to remain idle (there is  
no user input). The session is cancelled if the time limit set by this  
property is reached. Changes to this setting do not affect the  
current session; you must log out and log in again to make the new  
settings effective.  
An expired Web server session logs out the current session.  
Legal Values  
Default  
60 – 10800  
1800  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
179  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgSsnMgtSshIdleTimeout (Read/Write)  
Description  
Defines the secure shell idle timeout. This property sets the  
amount of time in seconds that a connection is allowed to remain  
idle (there is no user input). The session is cancelled if the time  
limit set by this property is reached. Changes to this setting do not  
affect the current session; you must log out and log in again to  
make the new settings effective.  
An expired secure shell session displays the following error message:  
• In case of iDRAC6 on Rack and Tower Servers:  
Connection timed out  
• In case of iDRAC6 Enterprise on Blade Servers:  
Session timed out. Closing the session...  
After the message is displayed, the system returns you to the shell  
that generated the Secure Shell session.  
Legal Values  
Default  
0 (No timeout)  
0 – 10800  
For iDRAC6 on Rack and Tower Servers: 300  
For iDRAC6 Enterprise on Blade Servers and CMC: 1800  
NOTE: If 0 (no timeout), the network connection does not send keep alive packets  
to probe the client. Otherwise, keep alive packets are sent to guarantee that the  
client is responding.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
180  
iDRAC6 and CMC Property Database Group and Object Descriptions  
 
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgSsnMgtTelnetIdleTimeout (Read/Write)  
Description  
Defines the Telnet idle timeout. This property sets the amount of  
time in seconds that a connection is allowed to remain idle (there is  
no user input). The session is cancelled if the time limit set by this  
property is reached. Changes to this setting do not affect the  
current session (you must log out and log in again to make the new  
settings effective).  
An expired Telnet session displays the following error message:  
• In case of iDRAC6 on Rack and Tower Servers:  
Connection timed out  
• In case of iDRAC6 Enterprise on Blade Servers:  
Session timed out. Closing the session...  
After the message is displayed, the system returns you to the shell  
that generated the Telnet session.  
Legal Values  
Default  
0 (No timeout)  
0– 10800  
For CMC: 60 – 10800  
For iDRAC6 on Rack and Tower Servers: 300  
For iDRAC6 Enterprise on Blade Servers and CMC: 1800  
NOTE: If 0 (no timeout), the network connection does not send keep alive packets  
to probe the client. Otherwise, keep alive packets are sent to guarantee that the  
client is responding.  
cfgSerial  
This group contains configuration parameters for iDRAC6 or CMC services.  
One instance of the group is allowed.  
NOTE: Use this object with the config or getconfig subcommands.  
NOTE: To use this object property for CMC, you must have Chassis Configuration  
Administrator privilege.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
181  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
The following sections provides information about the objects in the  
cfgSerial group.  
NOTE: The cfgSerial object group is applicable for iDRAC6 Enterprise on Blade  
Servers for only two properties—cfgSerialTelnetEnable=1 and  
cfgSerialSshEnable=1.  
cfgSerialBaudRate (Read/Write)  
Description  
Legal Values  
Sets the baud rate on iDRAC6 or CMC serial port.  
For iDRAC6: 9600, 28800, 57600, 115200  
For CMC: 2400, 4800, 9600, 19200, 28800, 38400, 57600,115200  
For iDRAC6: 57600  
Default  
For CMC: 115200  
cfgSerialConsoleEnable (Read/Write)  
Description  
Legal Values  
Enables or disables the RAC or CMC serial console interface.  
1 (TRUE)  
0 (FALSE)  
Default  
For iDRAC6: 0  
For CMC: 1  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
182  
iDRAC6 and CMC Property Database Group and Object Descriptions  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgSerialConsoleQuitKey (Read/Write)  
Default  
For iDRAC6:  
This key or key combination terminates Virtual Console text for  
iDRAC when using the console com2 command.  
The cfgSerialConsoleQuitKey value can be represented by one of  
the following:  
• Decimal value — For example, 95  
• Hexadecimal value — For example, 0x12  
• Octal value — For example, 007  
• ASCII value — For example, ^a  
ASCII values may be represented using the following Escape Key  
codes:  
• ^ followed by any alphabetic (a-z, A-Z)  
• ^ followed by the listed special characters: [ ] \ ^ _  
For CMC:  
This key specifies the character that aborts the serial text console  
connect (or racadm connect) command.  
NOTE: The CTRL key is represented by using the ^ (carat) character.  
NOTE: The CTRL key does not generate a character by itself, but must  
be struck simultaneously with another key to generate a character.  
For example, striking both the CTRL key and the \ key  
simultaneously (rather than sequentially) is denoted as ^\.  
Configuration options: The value must start with the ^ character,  
and be followed by one of the characters— a-z, A-Z, [, ], \  
Legal value:  
Default:  
String of up to 4 characters  
For iDRAC: <Ctrl><\>  
Fo CMC: ^\  
NOTE: For information on using RACADM commands for special  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
183  
 
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgSerialConsoleIdleTimeout (Read/Write)  
Description  
Legal Values  
The maximum number of seconds to wait before an idle serial  
session is disconnected.  
0 = No timeout  
60 – 1920  
Default  
For iDRAC6: 300  
For CMC: 1800  
cfgSerialConsoleNoAuth (Read/Write)  
Description  
Legal Values  
Enables or disables the RAC or CMC serial console login  
authentication.  
0 (enables serial login authentication)  
1 (disables serial login authentication)  
0
Default  
cfgSerialConsoleCommand (Read/Write)  
Description  
Legal Values  
Specifies a serial command that is executed after a user logs into  
the serial console interface.  
For iDRAC6: A string of up to 128 characters.  
For CMC: A string representing a valid serial command. For  
example, connect server-1.  
Default  
<blank>  
cfgSerialConsoleColumns  
NOTE: This object property is applicable only for CMC.  
Description  
Specifies the number of columns in the terminal window command  
line connected to the serial port.  
Legal Values  
Default  
0 – 256  
0 (equivalent to 80)  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
184  
iDRAC6 and CMC Property Database Group and Object Descriptions  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
NOTE: The prompt counts as two characters.  
NOTE: The terminal emulator must be configured with the line wrap mode ON, if a  
terminal emulator is used.  
NOTE: You must log out, then log in again for the changes to take effect.  
cfgSerialHistorySize (Read/Write)  
Description  
Legal Values  
Default  
Specifies the maximum size of the serial history buffer.  
0 – 8192  
8192  
cfgSerialCom2RedirEnable (Read/Write)  
The cfgSerialCom2RedirEnable object property is applicable only for iDRAC6 on  
Rack and Tower Servers. It is not applicable for iDRAC6 Enterprise on Blade Servers and  
CMC.  
Description  
Legal Values  
Enables or disables the console for COM 2 port redirection.  
1 (TRUE)  
0 (FALSE)  
1
Default  
cfgSerialSshEnable (Read/Write)  
Description  
Legal Values  
Enables or disables the secure shell (SSH) interface on iDRAC6 or  
CMC.  
1 (TRUE)  
0 (FALSE)  
1
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
185  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
Example  
racadm getconfig -g cfgSerial  
cfgSerialBaudRate=115200  
cfgSerialConsoleEnable=1  
cfgSerialConsoleQuitKey=^\  
cfgSerialConsoleIdleTimeout=1800  
cfgSerialConsoleNoAuth=0  
cfgSerialConsoleCommand=  
cfgSerialConsoleColumns=0  
cfgSerialHistorySize=8192  
cfgSerialTelnetEnable=0  
cfgSerialSshEnable=1  
cfgSerialTelnetEnable (Read/Write)  
Description  
Legal Values  
Enables or disables the Telnet console interface on iDRAC6 or  
CMC.  
1 (TRUE)  
0 (FALSE)  
0
Default  
cfgOobSnmp  
This group contains parameters to configure the SNMP agent and trap  
capabilities of iDRAC6 or CMC. One instance of the group is allowed.  
The CMC SNMP agent supports the standard RFC1213 mib-2, and the Dell  
enterprise-specific MIB.  
NOTE: For CMC, use this object with the config or getconfig subcommands.  
NOTE: To use this object property for CMC, you must have Chassis Configuration  
Administrator privilege.  
NOTE: For CMC, you can configure any setting that is not preceded by the hash  
sign (#) in the output. To modify a configurable object, use the -o option.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
186  
iDRAC6 and CMC Property Database Group and Object Descriptions  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
The following sections provides information about the objects in the  
cfgOobSnmp group.  
cfgOobSnmpAgentCommunity (Read/Write)  
Description  
Specifies the SNMP Community Name (identical to community  
string) used for SNMP traps. The community string acts as a  
password shared between different hosts over the network. This  
community string value must match with that of the other hosts for  
any kind of communication through SNMP.  
Legal Values  
Default  
A string of up to 31 characters.  
public  
Example  
racadm getconfig -g cfgOobSnmp  
cfgOobSnmpTrapsEnable=1  
cfgOobSnmpAgentCommunity=public  
cfgOobSnmpAgentEnable (Read/Write)  
Description  
Legal Values  
Enables or disables the SNMP agent in iDRAC6 or CMC.  
1 (TRUE)  
0 (FALSE)  
0
Default  
cfgTraps  
This group displays information for and configures delivery of SNMP traps for  
a specific user.  
NOTE: This object property is applicable only to CMC. Use this object with the  
config or getconfig subcommands.  
NOTE: To use this object property, you must have Chassis Configuration  
Administrator privilege.  
NOTE: You can configure any setting that is not preceded by the hash sign (#) in the  
output. To modify a configurable object, use the -o option.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
187  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgTrapsIndex (Read Only)  
Description  
Legal Values  
Default  
Indicates the unique index of an alert instance  
1 - 4  
1
cfgTrapsEnable  
Description  
Legal Values  
Enables or disables event traps on the CMC.  
1 (TRUE)  
0 (FALSE)  
None  
Default  
cfgTrapsAlertDestIpAddr  
Description  
Legal Values  
Default  
Sets the IP address that receives the alert.  
A string representing a valid IP address. For example, 192.168.0.20.  
None  
cfgTrapsCommunityName  
Description  
Sets the community string (identical to the community name) used  
for authentication. The community string acts as a password shared  
between different hosts over the network. This community string  
value must match with that of the other hosts for any kind of  
communication through SNMP.  
Legal Values  
Default  
A string representing the community name.  
None  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
188  
iDRAC6 and CMC Property Database Group and Object Descriptions  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
Example  
racadm getconfig -g cfgTraps -i 2  
# cfgTrapsIndex=2  
cfgTrapsEnable=1  
cfgTrapsAlertDestIpAddr=  
cfgTrapsCommunityName=public  
cfgRacTuning  
NOTE: Use this object with the config or getconfig subcommands.  
NOTE: To use this object property for CMC, you must have Chassis Configuration  
Administrator privilege.  
NOTE: For CMC, you can configure any setting that is not preceded by the hash  
sign (#) in the output. To modify a configurable object, use the -o option.  
Use the -m option to apply this setting to iDRAC.  
This group is used to configure various iDRAC6 or CMC configuration  
properties, such as valid ports and security port restrictions.  
The following sections provides information about the objects in the  
cfgRacTuning group.  
cfgRacTuneConRedirPort (Read/Write)  
NOTE: This object is applicable only to iDRAC6.  
Description  
Specifies the port to be used for keyboard, mouse, video, and  
Virtual Media traffic to iDRAC6.  
Legal Values  
Default  
1025 – 65535  
5900  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
189  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgRacTuneRemoteRacadmEnable (Read/Write)  
Description  
Legal Values  
Enables or disables the Remote RACADM interface in iDRAC or  
CMC.  
1 (TRUE)  
0 (FALSE)  
1
Default  
cfgRacTuneCtrlEConfigDisable  
NOTE: This object is applicable only for iDRAC6 on Rack and Tower Servers and  
not for iDRAC6 Enterprise on Blade Servers or CMC.  
Description  
Legal Values  
Enables or disables the ability to disable the ability of the local user  
to configure iDRAC from the BIOS POST option-ROM.  
1 (TRUE)  
0 (FALSE)  
0
Default  
cfgRacTuneHttpPort (Read/Write)  
Description  
Specifies the port number to use for HTTP network  
communication with iDRAC6 or CMC.  
Legal Values  
Default  
10 – 65535  
80  
NOTE: For CMC, the following port numbers are reserved and cannot be used: 21,  
68, 69, 123, 161, 546, 801, 4096, 5988, 5989, 6900, 9000, 60106.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
190  
iDRAC6 and CMC Property Database Group and Object Descriptions  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgRacTuneHttpsPort (Read/Write)  
Description  
Specifies the port number to use for HTTPS network  
communication with iDRAC6 or CMC.  
Legal Values  
Default  
10 – 65535  
443  
NOTE: For CMC, the following port numbers are reserved and cannot be used: 21,  
68, 69, 123, 161, 546, 801, 4096, 5988, 5989, 6900, 9000, 60106.  
cfgRacTuneIpRangeEnable (Read/Write)  
Description  
Legal Values  
Enables or disables the IPv4 Address Range validation feature of  
iDRAC6 or CMC.  
1 (TRUE)  
0 (FALSE)  
0
Default  
cfgRacTuneIpRangeAddr (Read/Write)  
Description  
Specifies the acceptable IPv4 address bit pattern in positions  
determined by the "1"s in the range mask property  
(cfgRacTuneIpRangeMask).  
For CMC, a login from the incoming IP address is allowed only if  
the following are identical:  
• cfgRacTuneIpRangeMask bit-wise and with incoming IP address  
• cfgRacTuneIpRanbeMask bit-wise and with  
cfgRacTuneIpRangeAddr  
Legal Values  
Default  
An IPv4 address formatted string, for example, 192.168.0.44.  
192.168.1.1  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
191  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgRacTuneIpRangeMask (Read/Write)  
Description  
Standard IP mask values with left-justified bits. For example,  
255.255.255.0.  
For CMC, a login from the incoming IP address is allowed only if  
both of the following are identical:  
• cfgRacTuneIpRangeMask bit-wise and with incoming IP address  
• cfgRacTuneIpRanbeMask bit-wise and with  
cfgRacTuneIpRangeAddr  
Legal Values  
Default  
An IPv4 address formatted string, for example, 255.255.255.0.  
Standard IP mask values with left-justified bits.  
255.255.255.0  
cfgRacTuneIpBlkEnable (Read/Write)  
Description  
Legal Values  
Enables or disables the IPv4 address blocking feature of iDRAC6 or  
CMC.  
1 (TRUE)  
0 (FALSE)  
0
Default  
cfgRacTuneIpBlkFailCount (Read/Write)  
Description  
The maximum number of login failures to occur within the window  
(cfgRacTuneIpBlkFailWindow) before login attempts from the IP  
address are rejected.  
Legal Values  
Default  
2 – 16  
5
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
192  
iDRAC6 and CMC Property Database Group and Object Descriptions  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgRacTuneIpBlkFailWindow (Read/Write)  
Description  
Defines the time span in seconds that the failed attempts are  
counted. When failure attempts age beyond this limit, they are  
dropped from the count.  
Legal Values  
Default  
For iDRAC6: 10 – 65535  
For CMC: 2 – 655356  
60  
cfgRacTuneIpBlkPenaltyTime (Read/Write)  
Description  
Legal Values  
Defines the time span in seconds that session requests from an IP  
address with excessive failures are rejected.  
For iDRAC6: 10 – 655356  
For CMC: 2 – 655356  
300  
Default  
cfgRacTuneSshPort (Read/Write)  
Description  
Legal Values  
Specifies the port number used for iDRAC6 or CMC SSH  
interface.  
For iDRAC6: 1 – 65535  
For CMC: 10 – 65535  
22  
Default  
cfgRacTuneTelnetPort (Read/Write)  
Description  
Legal Values  
Specifies the port number used for iDRAC6 or CMC Telnet  
interface.  
For iDRAC6: 1 – 65535  
For CMC: 10 – 65535  
23  
Default  
NOTE: For CMC, the following port numbers are reserved and cannot be used: 21,  
68, 69, 123, 161, 546, 801, 4096, 5988, 5989, 6900, 9000, 60106.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
193  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgRacTuneConRedirEnable (Read/Write)  
NOTE: This object property is applicable only to iDRAC6.  
Description  
Legal Values  
Enables or disables Virtual Console.  
1 (TRUE)  
0 (FALSE)  
1
Default  
cfgRacTuneConRedirEncryptEnable (Read/Write)  
NOTE: This object property is applicable only to iDRAC6.  
Description  
Legal Values  
Encrypts the video in a Virtual Console session.  
1 (TRUE)  
0 (FALSE)  
1
Default  
cfgRacTuneAsrEnable (Read/Write)  
NOTE: This object property is applicable only to iDRAC6.  
NOTE: This object requires an iDRAC6 reset before it becomes active.  
Description  
Legal Values  
Enables or disables iDRAC6 last crash screen capture feature.  
1 (TRUE)  
0 (FALSE)  
0
Default  
cfgRacTuneDaylightOffset (Read Only)  
Description  
Specifies the daylight savings offset (in minutes) to use for the RAC  
Time. This value is 0 if the time zone is not a Daylight Saving time  
zone.  
Legal Values  
Default  
0 – 60  
0
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
194  
iDRAC6 and CMC Property Database Group and Object Descriptions  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
Example  
racadm getconfig -g cfgRacTuning [-m server-<n>] -o  
<object name> <object value>  
cfgRacTuneRemoteRacadmEnable=1  
cfgRacTuneWebserverEnable=1  
cfgRacTuneHttpPort=80  
cfgRacTuneHttpsPort=443  
cfgRacTuneTelnetPort=23  
cfgRacTuneSshPort=22  
cfgRacTuneIpRangeEnable=0  
cfgRacTuneIpRangeAddr=192.168.1.1  
cfgRacTuneIpRangeMask=255.255.255.0  
cfgRacTuneIpBlkEnable=0  
cfgRacTuneIpBlkFailCount=5  
cfgRacTuneIpBlkFailWindow=60  
cfgRacTuneIpBlkPenaltyTime=300  
# cfgRacTuneTimezoneOffset=-18000  
# cfgRacTuneDaylightOffset=3600  
cfgRacTuneTimezoneOffset (Read Only)  
Description  
Specifies the time zone offset (in minutes) from Greenwich Mean  
Time (GMT)/Coordinated Universal Time (UTC) to use for the  
RAC Time. Some common time zone offsets for time zones in the  
United States are:  
• –480 (PST—Pacific Standard Time)  
• –420 (MST—Mountain Standard Time)  
• –360 (CST—Central Standard Time)  
• –300 (EST—Eastern Standard Time)  
For CMC: This object property is read only. Specifies the difference  
in number of seconds, from the (UTC)/ (GMT). This value is  
negative if the current time zone is west of Greenwich.  
Legal Values  
Default  
–720 – 7800  
0
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
195  
 
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgRacTuneLocalServerVideo (Read/Write)  
NOTE: This object property is applicable only to iDRAC6.  
Description  
Legal Values  
Enables (switches on) or disables (switches off) the local server  
video.  
1 (TRUE - Enables)  
0 (FALSE- Disables)  
1
Default  
cfgRacTuneLocalConfigDisable (Read/Write)  
NOTE: This object property is applicable only to iDRAC6.  
Description  
Disables write access to iDRAC6 configuration data by setting to 1.  
NOTE: Access can be disabled using the local RACADM or iDRAC6  
Web interface; however, once disabled, access can be re-enabled  
only through iDRAC6 Web interface.  
Legal Values  
Default  
0 (TRUE-Enables)  
1 (FALSE-Disables)  
0
cfgRacTuneWebserverEnable (Read/Write)  
Description  
Enables or disables iDRAC6 or CMC web server. If this property is  
disabled, iDRAC6 or CMC is not accessible using client web  
browsers. This property has no effect on the Telnet/SSH or  
RACADM interfaces.  
Legal Values  
Default  
1 (TRUE)  
0 (FALSE)  
1
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
196  
iDRAC6 and CMC Property Database Group and Object Descriptions  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgRacTuneVirtualConsoleAuthorizeMultipleSessions (Read/Write)  
NOTE: This object property is applicable only to iDRAC6.  
NOTE: To modify this property, you must have Configure iDRAC permission.  
This object can be used only with remote or firmware (SSH or Telnet) RACADM and  
not with local RACADM or with earlier DRAC products.  
NOTE: This object is applicable only for iDRAC6 on Rack and Tower Servers and  
not for iDRAC6 Enterprise on Blade Servers.  
Description  
Legal Values  
If a first user is already using the Virtual Console, the value of this  
object effects the privileges granted to the subsequent user’s shared  
request after the timeout of 30 seconds.  
0 (If the user of the first session has not responded for session  
sharing request by subsequent user, the next session user gets an  
access denied error after the default timeout value of 30 seconds.)  
1(If the user of the first session has not responded for session  
sharing request by subsequent user, the next session user gets a read  
only access after the default timeout value of 30 seconds.)  
2 (If the user of the first session has not responded for session  
sharing request by subsequent user, the next session user gets  
administrator access after default timeout value of 30 seconds.)  
Default  
0
cfgRacTunePluginType (Read/Write)  
NOTE: This object property is applicable only to iDRAC6.  
Description  
Legal Values  
Specifies the plug-in type to use when running virtual console from  
browser.  
0 = Use Active X /Native Plugin  
1 = Use Java Plugin  
Default  
0 = Active X /Native Plugin  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
197  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
ifcRacManagedNodeOs  
NOTE: This object is applicable only to iDRAC6.  
This group contains properties that describe the managed server  
operating system. One instance of the group is allowed.  
The following sections provides information about the objects in the  
ifcRacManagedNodeOs group.  
ifcRacMnOsHostname (Read Only)  
Description  
Legal Values  
Default  
The host name of the managed server.  
A string of up to 255 characters.  
<blank>  
ifcRacMnOsOsName (Read Only)  
Description  
Legal Values  
Default  
The operating system name of the managed server.  
A string of up to 255 characters.  
<blank>  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
198  
iDRAC6 and CMC Property Database Group and Object Descriptions  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgRacVirtual  
NOTE: This object is applicable only to iDRAC6.  
This group contains parameters to configure the iDRAC6 Virtual Media  
feature. One instance of the group is allowed.  
The following sections provides information about the objects in the  
cfgRacVirtual group.  
cfgRacVirMediaAttached (Read/Write)  
Description  
This object is used to attach virtual devices to the system via the  
USB bus. When the devices are attached the server recognizes valid  
USB mass storage devices attached to the system. This is equivalent  
to attaching a local USB CDROM/floppy drive to a USB port on the  
system. When the devices are attached they can be connected to  
the virtual devices remotely using iDRAC6 Web interface or the  
CLI. Setting this object to 0 causes the devices to detach from the  
USB bus.  
Legal Values  
Default  
0 = Detach  
1 = Attach  
2 = Auto-Attach  
0
cfgVirMediaBootOnce (Read/Write)  
Description  
Enables or disables the Virtual Media Boot Once feature of  
iDRAC6.  
If this property is enabled when the host server is rebooted, this  
feature attempts to boot from the virtual media devices—if the  
appropriate media is installed in the device.  
Legal Values  
Default  
1 (TRUE)  
0 (FALSE)  
0
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
199  
         
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgVirtualFloppyEmulation (Read/Write)  
NOTE: Virtual Media has to be reattached (using cfgVirMediaAttached) for this  
change to take effect.  
Description  
When set to 0, the virtual floppy drive is recognized as a removable  
disk by Windows operating systems. Windows operating systems  
assigns a drive letter that is C: or higher during enumeration. When  
set to 1, the Virtual Floppy drive is seen as a floppy drive by  
Windows operating systems. Windows operating systems assigns a  
drive letter of A: or B:.  
Legal Values  
Default  
1 (TRUE)  
0 (FALSE)  
0
cfgVirMediaKeyEnable (Read/Write)  
Description  
Enables or disables the Virtual Media key feature of the RAC.  
NOTE: This command is deprecated from 1.5 and 3.0 releases  
onwards. The functionality of this command is now covered by  
cfgVFlashSDEnable. While execution of the  
cfgVirMediaKeyEnablecommand is successful, it is  
recommended to use the cfgVFlashSDEnablecommand. For  
Legal Values  
Default  
1 (TRUE)  
0 (FALSE)  
0
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
200  
iDRAC6 and CMC Property Database Group and Object Descriptions  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgSDWriteProtect (Read only)  
Description  
Displays if the physical write protect latch on the SD card is  
enabled or disabled.  
NOTE: This command is deprecated from 1.5 and 3.0 releases  
onwards. The functionality of this command is now covered by  
cfgVFlashSDWriteProtect. While execution of the  
cfgSDWriteProtectcommand is successful, it is  
recommended to use the cfgVFlashSDWriteProtect  
command. For more information, see "cfgVFlashSDWriteProtect (Read  
Legal Values  
Default  
1 (TRUE)  
0 (FALSE)  
0
cfgLCDriveEnable (Read/Write)  
Description  
Enable/disable the USC-LCE device from showing up in the  
operating system. It must be disabled in ESXi operating system.  
Allows proper operation of operating system and drivers interfacing  
with the iDRAC/USC-LCE USB devices.  
Legal Values  
Default  
1 (Enabled)  
0 (Disabled)  
1
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
201  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerInfo  
This group allows you to select the BIOS first boot device and to boot the  
selected device only once.  
For CMC, this group allows you to displays information for and configure a  
server in the chassis.  
NOTE: Use this object with the config or getconfig subcommands.  
NOTE: To use this object property for CMC, you must have Chassis Configuration  
Administrator privilege.  
NOTE: For CMC, you can configure any setting that is not preceded by the hash  
sign (#) in the output. To modify a configurable object, use the -o option  
The following sections provide information about the objects in the  
cfgServerInfo group.  
cfgServerInfoIndex (Read only)  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Default  
Displays the index name of the server.  
None  
None  
cfgServerSlotNumber (Read only)  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Default  
Specifies the location of the specified server (1–16) in the chassis.  
None  
None  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
202  
iDRAC6 and CMC Property Database Group and Object Descriptions  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerServiceTag (Read only)  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Default  
Displays the service tag of the specified server.  
None  
None  
cfgServerName (Read/Write)  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Displays the name of the specified server.  
Maximum of 15 non-extended ASCII characters, (ASCII codes 32  
through 126). For more information, see "Guidelines to Quote  
Default  
SLOT-<slot number>  
cfgServerFW (Read only)  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Default  
Displays the server's iDRAC management firmware revision.  
None  
None  
cfgServerBIOS (Read only)  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Default  
Displays the server's BIOS revision.  
None  
None  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
203  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerBmcMacAddress (Read only)  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Default  
Displays the BMC MAC address of the specified server.  
None  
None  
cfgServerNic1MacAddress (Read only)  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Default  
Displays the MAC address of the server NIC 1.  
None  
None  
cfgServerNic2MacAddress (Read only)  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Default  
Displays the MAC address of the server NIC 2.  
None  
None  
cfgServerNic3MacAddress (Read only)  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Default  
Displays the MAC address of the server NIC 3.  
None  
None  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
204  
iDRAC6 and CMC Property Database Group and Object Descriptions  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerNic4MacAddress (Read only)  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Default  
Displays the MAC address of the server NIC 4.  
None  
None  
cfgServerPriority (Read/Write)  
NOTE: This object is applicable only to CMC.  
Description  
Sets the priority level allotted to the server in the chassis for power  
budgeting purposes.  
Legal Values  
Default  
1–9 in descending priority, where 1 holds the highest priority  
1
cfgServerNicEnable (Read/Write)  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Enables or disables LAN channel.  
1 (enable)  
0 (disable)  
None  
Default  
cfgServerIPMIOverLanEnable (Read/Write)  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Enables or disables IPMI LAN channel.  
1 (enable)  
0 (disable)  
None  
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
205  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerPowerBudgetAllocation (Read only)  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Displays the current power allocation for the server.  
1 (enable)  
0 (disable)  
None  
Default  
cfgServerDNSRegisterIMC (Read/Write)  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Enables or disables DNS name registration for the Integrated  
Management Controller (iDRAC).  
1 (enable)  
0 (disable)  
None  
Default  
cfgServerDNSIMCName (Read/Write)  
NOTE: This object is applicable only to CMC.  
Description  
Displays the DNS domain name for the integrated Remote Access  
Controller, iDRAC.  
Legal Values  
Default  
None  
None  
cfgServerRootPassword (Write only)  
NOTE: This object is applicable only to CMC.  
Description  
Displays the password for iDRAC as a series of asterisks (*). It  
cannot be seen or displayed after this property is written.  
Legal Values  
Default  
None  
None  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
206  
iDRAC6 and CMC Property Database Group and Object Descriptions  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerFirstBootDevice (Read/Write)  
NOTE: For CMC, this object is Write only.  
NOTE: For a vFlash Partition to be configured as First Boot Device, it has to be  
attached first. When a detached / non-existent VFlash partition or a non-standard  
boot device is configured as first boot device, the following error message is  
displayed:  
Invalid object value  
Description  
Legal Values  
Sets or displays the first boot device.  
For iDRAC6, you can also set a vFlash partition that is attached as  
a bootable device. For more information, see  
No-Override  
PXE  
HDD  
DIAG  
CD-DVD  
BIOS  
vFDD  
VCD-DVD  
iSCSI  
VFLASH  
FDD  
SD  
Default  
No-Override  
cfgServerBootOnce (Read/Write)  
NOTE: For CMC, this object is Write only.  
Description  
Legal Values  
Enables or disables the server boot once feature.  
1 = TRUE  
0 = FALSE  
1
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
207  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerPowerConsumption (Read only)  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Default  
Displays the current power consumption for a server  
None  
None  
Example  
racadm getconfig -g cfgServerInfo -i 8  
# cfgServerInfoIndex=8  
# cfgServerSlotNumber=8  
# cfgServerServiceTag=  
cfgServerName=SLOT-08  
# cfgServerFW=3.0  
# cfgServerBIOS=  
# cfgServerBmcMacAddress=00:21:9B:FE:5F:58  
# cfgServerNic1MacAddress=00:0D:56:B8:69:63  
170 CMC Property Database Group and Object Definitions  
# cfgServerNic2MacAddress=00:0D:56:B8:69:65  
# cfgServerNic3MacAddress=00:0D:56:B8:69:CB  
# cfgServerNic4MacAddress=00:0D:56:B8:69:CD  
cfgServerPriority=1  
cfgServerNicEnable=1  
cfgServerIPMIOverLANEnable=1  
# cfgServerPowerBudgetAllocation=0  
cfgServerDNSRegisterIMC=0  
cfgServerDNSIMCName=iDRAC-  
# cfgServerRootPassword=******** (Write-Only)  
# cfgServerFirstBootDevice=******** (Write-Only)  
# cfgServerBootOnce=******** (Write-Only)  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
208  
iDRAC6 and CMC Property Database Group and Object Descriptions  
 
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
# cfgServerPowerConsumption=0  
racadm getconfig -g cfgServerInfo -i 1  
# cfgServerInfoIndex=1  
# cfgServerSlotNumber=1  
# cfgServerServiceTag=1S0M0G1  
cfgServerName=SLOT-01  
# cfgServerFW=1.40 (Build 12)  
# cfgServerBIOS=4.0.2  
# cfgServerBmcMacAddress=00:18:8B:FF:41:43  
# cfgServerNic1MacAddress=00:1A:A0:FF:D9:F4  
# cfgServerNic2MacAddress=00:1A:A0:FF:D9:F6  
cfgServerPriority=1  
cfgServerNicEnable=1  
cfgServerIPMIOverLANEnable=1  
# cfgServerPowerBudgetAllocation=0  
cfgServerDNSRegisterIMC=0  
cfgServerDNSIMCName=iDRAC-1S0M0G1  
# cfgServerRootPassword=******** (Write-Only)  
# cfgServerFirstBootDevice=******** (Write-Only)  
# cfgServerBootOnce=******** (Write-Only)  
# cfgServerPowerConsumption=0  
cfgActiveDirectory  
This group contains parameters to configure iDRAC6 or CMC Active  
Directory feature.  
NOTE: Use this object with the config or getconfig subcommands.  
NOTE: To use this object property for CMC, you must have Chassis Configuration  
Administrator privilege.  
NOTE: For CMC, you can configure any setting that is not preceded by the hash  
sign (#) in the output. To modify a configurable object, use the -o option.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
209  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
The following sections provides information about the objects in the  
cfgActiveDirectory group.  
cfgADRacDomain (Read/Write)  
Description  
Legal Values  
Active Directory Domain in which iDRAC6 or CMC resides.  
Any printable text string of up to 254 characters, with no white  
space.  
Default  
<blank>  
cfgADRacName (Read/Write)  
Description  
Legal Values  
Default  
Name of iDRAC6 or CMC as recorded in the Active Directory  
forest.  
Any printable text string of up to 254 characters, with no white  
space.  
<blank>  
cfgADRootDomain  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Specifies the root domain of the domain forest.  
Any printable text string of up to 254 characters, with no white  
space.  
Default  
<blank>  
cfgADEnable (Read/Write)  
Description  
Enables or disables Active Directory user authentication on  
iDRAC6 or CMC. If this property is disabled, only local iDRAC6 or  
CMC authentication is used for user logins.  
Legal Values  
Default  
1 (TRUE)  
0 (FALSE)  
0
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
210  
iDRAC6 and CMC Property Database Group and Object Descriptions  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgADSCLEnable  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Enables you to log on to the CMC without enabling the Smart  
Card login  
1 (Enable)  
0 (Disable)  
0
Default  
cfgADSSOEnable (Read/Write)  
Description  
Legal Values  
Enables or disables Active Directory single sign-on authentication  
on iDRAC6.  
1 (TRUE)  
0 (FALSE)  
0
Default  
cfgADDomainController  
NOTE: This object is applicable only to CMC.  
Description  
Specifies the LDAP server from which you want the CMC to obtain  
user names. Must be used with cfgADSpecifyServerEnable.  
Valid IP address or fully qualified domain name (FQDN).  
None  
Legal Values  
Default  
cfgADDomainController1 (Read/Write)  
NOTE: This object is applicable only to iDRAC6.  
Description  
Legal Values  
Default  
iDRAC6 uses the value specified to search the LDAP server for user  
names.  
A string of up to 254 ASCII characters representing a valid IP  
address or a fully qualified domain name (FQDN).  
None  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
211  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgADDomainController2 (Read/Write)  
NOTE: This object is applicable only to iDRAC6.  
Description  
Legal Values  
Default  
iDRAC6 uses the value specified to search the LDAP server for user  
names.  
A string of up to 254 ASCII characters representing a valid IP  
address or a fully qualified domain name (FQDN).  
None  
cfgADDomainController3 (Read/Write)  
NOTE: This object is applicable only to iDRAC6.  
Description  
Legal Values  
Default  
iDRAC6 uses the value specified to search the LDAP server for user  
names.  
A string of up to 254 ASCII characters representing a valid IP  
address or a fully qualified domain name (FQDN).  
None  
cfgADAuthTimeout (Read/Write)  
NOTE: To modify this property, you must have Configure iDRAC permission.  
Description  
Specifies the number of seconds to wait for Active Directory  
authentication requests to complete before timing out.  
Legal Values  
Default  
15 – 300 seconds  
120  
cfgADType (Read/Write)  
Description  
Legal Values  
Determines the schema type to use with Active Directory.  
1 (Enables Active Directory with the extended schema)  
2 (Enables Active Directory with the standard schema)  
1
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
212  
iDRAC6 and CMC Property Database Group and Object Descriptions  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgADSpecifyServerEnable  
NOTE: This object is applicable only to CMC.  
Description  
Allows you to enable or disable and specify an LDAP server or a  
global catalog server. Use cfgADDomainController or  
cfgADGlobalCatalog to specify the IP address  
Legal Values  
Default  
1 (enabled)  
0 (disabled)  
0
cfgADGlobalCatalog  
NOTE: This object is applicable only to CMC.  
Description  
Specifies the global catalog server from which you want the CMC to  
obtain user names. Must be used with cfgADSpecifyServerEnable.  
Legal Values Valid IP address or FQDN.  
Default  
None  
Example  
racadm getconfig -g cfgActiveDirectory  
cfgADEnable=1  
cfgADSCLEnable=0  
cfgADSSOEnable=0  
cfgADRacDomain=  
cfgADRootDomain=help  
cfgADRacName=  
cfgADRacAuthTimeout=300  
cfgADType=0x4  
cfgADSpecifyServerEnable=1  
cfgADDomainController=192.168.1.1  
cfgADGlobalCatalog=127.0.0.1  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
213  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgADGlobalCatalog1 (Read/Write)  
NOTE: This object is applicable only to iDRAC6.  
Description  
Legal Values  
Default  
iDRAC6 uses the value specified to search the Global Catalog  
server for user names.  
A string of up to 254 ASCII characters representing a valid IP  
address or a fully qualified domain name (FQDN).  
None  
cfgADGlobalCatalog2 (Read/Write)  
NOTE: This object is applicable only to iDRAC6.  
Description  
Legal Values  
Default  
iDRAC6 uses the value specified to search the Global Catalog  
server for user names.  
A string of up to 254 ASCII characters representing a valid IP  
address or a fully qualified domain name (FQDN).  
None  
cfgADGlobalCatalog3 (Read/Write)  
NOTE: This object is applicable only to iDRAC6.  
Description  
Legal Values  
Default  
iDRAC6 uses the value specified to search the Global Catalog  
server for user names.  
A string of up to 254 ASCII characters representing a valid IP  
address or a fully qualified domain name (FQDN).  
None  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
214  
iDRAC6 and CMC Property Database Group and Object Descriptions  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgADCertValidationEnable (Read/Write)  
NOTE: This object is applicable only to iDRAC6.  
Description  
Legal Values  
Enables or disables Active Directory certificate validation as a part  
of the Active Directory configuration process.  
1 (TRUE)  
0 (FALSE)  
1
Default  
cfgADDcSRVLookupEnable (Read/Write)  
NOTE: This object is applicable only to iDRAC6.  
Description  
Configures iDRAC6 to use pre-configured domain controllers or to  
use DNS to find the domain controller. If using pre-configured  
domain controllers, then the domain controllers to use are specified  
under cfgAdDomainController1, cfgAdDomainController2, and  
cfgAdDomainController3. iDRAC6 does not fail over to the  
specified domain controllers when DNS lookup fails or none of the  
servers returned by the DNS lookup works.  
Legal Values  
Default  
1 (TRUE)—use DNS to look up domain controllers  
0 (FALSE)—use pre-configured domain controllers  
0
cfgADDcSRVLookupbyUserdomain (Read/Write)  
NOTE: This object is applicable only to iDRAC6.  
Description  
Legal Values  
Chooses the way the user domain is looked up for Active Directory.  
1 (TRUE)—use user domain as the search domain to look up DCs.  
The user domain is chosen from the user domain list or entered by  
the login user.  
0 (FALSE)—use the configured search domain  
cfgADDcSrvLookupDomainName to look up DCs.  
Default  
1
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
215  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgADDcSRVLookupDomainName (Read/Write)  
NOTE: This object is applicable only to iDRAC6.  
Description  
This is the Active Directory Domain to use when  
cfgAddcSrvLookupbyUserDomain is set to 0.  
Legal Values  
Default  
String. Maximum length = 254  
Null  
cfgADGcSRVLookupEnable (Read/Write)  
NOTE: This object is applicable only to iDRAC6.  
Description  
Determines how the global catalog server is looked up. If using  
pre-configured global catalog servers, then iDRAC6 uses the values  
cfgAdGlobalCatalog1, cfgAdGlobalCatalog2, and  
cfgAdGlobalCatalog3.  
Legal Values  
Default  
0(FALSE)—use pre-configured Global Catalog Servers (GCS)  
1(TRUE)—use DNS to look up GCS  
0
cfgADGcRootDomain (Read/Write)  
NOTE: This object is applicable only to iDRAC6.  
Description  
The name of the Active Directory root domain used for DNS look  
up, to locate Global Catalog servers.  
String. Maximum length = 254  
Null  
Legal Values  
Default  
cfgLDAP  
NOTE: Use this object with the config or getconfig subcommands.  
NOTE: To use this object property for CMC, you must have Chassis Configuration  
Administrator privilege.  
NOTE: For CMC, you can configure any setting that is not preceded by the hash  
sign (#) in the output. To modify a configurable object, use the -o option  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
216  
iDRAC6 and CMC Property Database Group and Object Descriptions  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
This group allows you to configure settings related to the Lightweight  
Directory Access Protocol (LDAP).  
The following sections provides information about the objects in the  
cfgLDAP group.  
cfgLdapEnable (Read/Write)  
Description  
Turns LDAP service on or off.  
If this property is disabled, local CMC authentication is used for  
user logins.  
Legal Values  
Default  
1 (TRUE)—Enable LDAP Services  
0 (FALSE)—Disable LDAP Services  
0
NOTE: For CMC, enabling this option turns off cfgADEnable.  
cfgLdapServer (Read/Write)  
Description  
Legal Values  
Configures the address of the LDAP Server. IPv4 and IPv6 are  
supported.  
String.  
For iDRAC6: Maximum length = 1024  
For CMC: Maximum length = 254  
Null  
Default  
NOTE: You can specify multiple servers by separating each server with a comma.  
For example, example.com, sub1.example.com  
cfgLdapPort (Read/Write)  
Description  
Legal Values  
Default  
Port of LDAP over SSL. Non-SSL port is not supported.  
1 - 65535  
636  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
217  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgLdapBasedn (Read/Write)  
Description  
The Domain Name of the branch of the directory where all searches  
should start from.  
Legal Values  
Default  
String. Maximum length = 254  
Null  
cfgLdapUserAttribute (Read/Write)  
Description  
Specifies the user attribute to search for. If not configured, the  
default used is uid. It is recommended to be unique within the  
chosen baseDN, otherwise a search filter must be configured to  
ensure the uniqueness of the login user. If the user DN cannot be  
uniquely identified, login fails with error.  
Legal Values  
Default  
String. Maximum length = 254  
Null  
uid if not configured.  
cfgLdapGroupAttribute (Read/Write)  
Description  
Specify which LDAP attribute is used to check for group  
membership. This should be an attribute of the group class. If not  
specified, then iDRAC6 or CMC uses the member and unique  
member attributes.  
Legal Values  
Default  
String. Maximum length = 254  
Null  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
218  
iDRAC6 and CMC Property Database Group and Object Descriptions  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgLdapGroupAttributeIsDN (Read/Write)  
Description  
When it is set to 1, iDRAC6 compares the userDN retrieved from  
the directory to compare to the members of the group; if it is set to  
0, the user name provided by the login user is used to compare to  
the members of the group. This does not impact the search  
algorithm for the bind. iDRAC6 always searches the userDN and  
uses the userDN to bind.  
For CMC, if enabled, the CMC performs DN matching, otherwise  
the CMC uses the user name provided at login for matching.  
Legal Values  
Default  
1 (TRUE)—Use the userDN from the LDAP Server  
0 (FALSE)—Use the userDN provided by the login user  
1
cfgLdapBinddn (Read/Write)  
Description  
The distinguished name of a user used to bind to the server when  
searching for the login user's DN. If not provided, an anonymous  
bind is used. This is optional but is required if anonymous bind is  
not supported.  
Legal Values  
Default  
String. Maximum length = 254  
Null  
NOTE: If cfgLDAPBindDN is [null] and cfgLDAPBindPassword is [null], then the  
CMC attempts an anonymous bind.  
cfgLdapBindpassword (Write only)  
Description  
A bind password to use in conjunction with the bindDN. The bind  
password is sensitive data, and should be properly protected. This is  
optional but is required if anonymous bind is not supported.  
Legal Values  
Default  
String. Maximum length = 254  
Null  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
219  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgLdapSearchFilter (Read/Write)  
Description  
A valid LDAP search filter. This is used if the user attribute cannot  
uniquely identify the login user within the chosen baseDN. The  
search filter only applies to userDN search and not the group  
membership search.  
Legal Values  
Default  
For iDRAC6: String of maximum length = 254 characters  
For CMC: String of maximum length = 1024 characters  
(objectclass=*)  
Searches for all objects in tree.  
cfgLDAPCertValidationEnable (Read/Write)  
Description  
Legal Values  
Controls certificate validation during SSL handshake.  
1 (TRUE)—iDRAC6 or CMC uses the CA certificate to validate  
the LDAP server certificate during SSL handshake.  
0 (FALSE)—iDRAC6 or CMC skips the certificate validation step  
of SSL handshake.  
Default  
1
cfgLDAPNetworkTimeout  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Default  
Configures the network timeout in seconds.  
Positive integer  
30 seconds  
cfgLDAPSearchTimeout  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Default  
Configures the search timeout in seconds.  
Positive integer  
120 seconds  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
220  
iDRAC6 and CMC Property Database Group and Object Descriptions  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgLDAPSRVLookupEnable  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Configures the CMC to query a DNS server for SRV records.  
1 (true)  
0 (false)  
0
Default  
cfgLDAPSRVLookupDomainName  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Configures the domain name to be used in the SRV lookup.  
String of maximum length of 254 alphanumeric characters and  
hyphens. The string must begin with a letter.  
Default  
[null]  
cfgLDAPSRVLookupServiceName  
NOTE: This object is applicable only to CMC.  
Description  
Legal Values  
Default  
Configures the service name to be used in the SRV lookup.  
String of maximum length of 254 characters.  
ldap  
cfgLdapRoleGroup  
This group allows the user to configure role groups for LDAP.  
NOTE: Use this object with the config or getconfig subcommands.  
NOTE: To use this object property for CMC, you must have Chassis Configuration  
Administrator privilege.  
NOTE: For CMC, you can configure any setting that is not preceded by the hash  
sign (#) in the output. To modify a configurable object, use the -o option.  
For CMC, this object configures Generic LDAP Role group Descriptions and  
defines the CMC privileges that LDAP-authenticated users are granted.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
221  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgLDAPRoleGroup is indexed, containing instances numbered from 1 to 5.  
Each object instance consists of a pair of properties:  
cfgLDAPRoleGroupDN: an LDAP distinguished name (DN)  
cfgLDAPRoleGroupPrivilege: a CMC privilege map  
Each LDAP-authenticated user assumes the total set of CMC privileges  
assigned to the matching LDAP distinguished names that the user belongs to.  
That is, if the user belongs to multiple role group DNs, the user receives all  
associated privileges for those DNs.  
The following sections provides information about the objects in the  
cfgLdapRoleGroup group.  
cfgLdapRoleGroupIndex (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
This is the index value of the Role Group Object.  
An integer between 1 and 5  
<instance>  
cfgLdapRoleGroupDN (Read/Write)  
Description  
This is the Domain Name of the group in this index.  
For CMC, configure the LDAP distinguished name (DN) for the  
role group instance.  
Legal Values  
Default  
String. Maximum length = 1024  
None  
Example  
racadm getconfig -g cfgLDAPRoleGroup -o  
cfgLDAPRoleGroupDN -i 1 cn=everyone,ou=groups,dc=  
openldap,dc=com  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
222  
iDRAC6 and CMC Property Database Group and Object Descriptions  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgLdapRoleGroupPrivilege (Read/Write)  
Description  
Legal Values  
A bit–mask defining the privileges associated with this particular  
group.  
2,3,4, and 5  
where:  
• 2 - User  
• 3 - Admin  
• 4 - Operator  
• 15 - No Access  
15  
Default  
Example  
racadm getconfig -g cfgLDAPRoleGroup -o  
cfgLDAPRoleGroupPrivilege -i 1 2  
cfgStandardSchema  
This group contains parameters to configure the Active Directory standard  
schema settings.  
NOTE: Use this object with the config or getconfig subcommands.  
NOTE: To use this object property for CMC, you must have Chassis Configuration  
Administrator privilege.  
NOTE: For CMC, you can configure any setting that is not preceded by the hash  
sign (#) in the output. To modify a configurable object, use the -o option.  
The following sections provides information about the objects in the  
cfgStandardSchema group.  
cfgSSADRoleGroupIndex (Read Only)  
Description  
Legal Values  
Default  
Index of the Role Group as recorded in the Active Directory.  
An integer between 1 and 5  
<instance>  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
223  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgSSADRoleGroupName (Read/Write)  
Description  
Legal Values  
Name of the Role Group as recorded in the Active Directory forest.  
Any printable text string of up to 254 characters with no white  
space.  
Default  
<blank>  
cfgSSADRoleGroupDomain (Read/Write)  
Description  
Legal Values  
Active Directory Domain in which the Role Group resides.  
Any printable text string of up to 254 characters, with no white  
space.  
Default  
<blank>  
cfgSSADRoleGroupPrivilege (Read/Write)  
Description  
Legal Values  
Use the bit mask numbers in Table 3-5 to set role-based authority  
privileges for a Role Group.  
For iDRAC6: 0x00000000 to 0x000001ff  
For CMC: 0x00000000–0x00000fff  
<blank>  
Default  
Example  
racadm getconfig -g cfgStandardSchema  
# cfgSSADRoleGroupIndex=1  
cfgSSADRoleGroupName=blsys-1  
cfgSSADRoleGroupDomain=  
cfgSSADRolGroupPrivilege=3081  
Table 3-5 displays the bit masks for Role Group privileges.  
Table 3-5. Bit Masks for Role Group Privileges  
Role Group Privilege  
Login to iDRAC  
Bit Mask  
0x00000001  
0x00000002  
Configure iDRAC  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
224  
iDRAC6 and CMC Property Database Group and Object Descriptions  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
Table 3-5. Bit Masks for Role Group Privileges (continued)  
Role Group Privilege  
Configure Users  
Bit Mask  
0x00000004  
0x00000008  
0x00000010  
0x00000020  
0x00000040  
0x00000080  
0x00000100  
Clear Logs  
Execute Server Control Commands  
Access Virtual Console  
Access Virtual Media  
Test Alerts  
Execute Debug Commands  
cfgChassisPower  
This group is applicable only to CMC and contains parameters to display or  
configure power for the chassis.  
NOTE: Use this object with the config or getconfig subcommands.  
NOTE: To use this object property, you must have Chassis Configuration  
Administrator privilege.  
NOTE: You can configure any setting that is not preceded by the hash sign (#) in the  
output. To modify a configurable object, use the -o option.  
The following sections provides information about the objects in the  
cfgChassisPower group.  
cfgChassisInPower (Read Only)  
Indicates the cumulative input power consumption data (in watts and  
BTU/hr) captured from all healthy and functional PSUs in the chassis.  
cfgChassisPeakPower (Read Only)  
The maximum system input power consumption (in watts) since the value  
was last cleared by a user.  
cfgChassisPeakPowerTimestamp (Read Only)  
The timestamp recorded when the peak input power consumption value  
occurred.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
225  
         
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgChassisMinPower (Read Only)  
The minimum system input power consumption value (in watts) over the  
time since the value was last cleared.  
cfgChassisMinPowerTimestamp (Read Only)  
The timestamp recorded when the minimum system power occurred.  
cfgChassisPowerStatus (Read Only)  
Description  
Legal Values  
Indicates the power status of the chassis.  
1 (other)  
2 (unknown)  
3 (OK)  
4 (non-critical)  
5 (critical)  
6 (non-recoverable)  
None  
Default  
cfgChassisRedundantState (Read Only)  
Description  
Legal Values  
Enables or disables power redundancy for the chassis.  
0 (none)  
1 (full)  
None  
Default  
cfgChassisPowerCap (Read/Write)  
Description  
Indicates the maximum power consumption limit (in watts) for the  
entire chassis. The command generates an error if server throttling  
is necessary to achieve the power goal based on the value for this  
setting.  
Legal Values  
Default  
2715–16685 watts  
16685 watts  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
226  
iDRAC6 and CMC Property Database Group and Object Descriptions  
         
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgChassisPowerCapF (Read/Write)  
Description  
Indicates the maximum power consumption limit (in watts) for the  
entire chassis. Use cfgChassisPowerCapF when power  
consumption is to be changed regardless of whether server  
throttling is required. This command generates an error if the value  
for this setting is lower than the minimum power required for the  
chassis configuration.  
Legal Values  
Default  
2715–16685 watts  
16685 watts  
cfgChassisPowerCapBTU (Read/Write)  
Description  
Indicates the maximum power consumption limit (in BTU/hr) for  
the entire chassis. The command generates an error if server  
throttling is necessary to achieve the power goal based on the value  
for this setting.  
Legal Values  
Default  
9264 - 56931 BTU/hr  
43221 BTU/hr  
cfgChassisPowerCapFBTU (Read/Write)  
Description  
Indicates the maximum power consumption limit (in BTU/hr) for  
the entire chassis. Use cfgChassisCapFBTU when power  
consumption is to be changed regardless of whether server  
throttling is required. The command generates an error if the value  
for this setting is lower than the minimum power required for the  
chassis configuration.  
Legal Values  
Default  
9264 - 56931 BTU/hr  
56931 BTU/hr  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
227  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgChassisPowerCapPercent (Read/Write)  
Description  
Indicates the power consumption limit as a percentage. The  
percentage is computed mathematically as the minimum power +  
(percent * (maximum power - minimum power)). The command  
generates an error if server throttling is necessary to achieve the  
power goal based on the value for this setting.  
Legal Values  
Default  
16 -100  
100  
cfgChassisPowerCapFPercent (Read/Write)  
Description  
Indicates the power consumption limit as a percentage. The  
percentage is computed mathematically as the minimum power +  
(percent * (maximum power - minimum power)). Use  
cfgChassisPowerCapFPercent when power consumption is to be  
changed regardless of whether server throttling is required.  
Legal Values  
Default  
16 -100  
100  
cfgChassisRedundancyPolicy (Read/Write)  
Description  
Legal Values  
Sets the redundancy policy of the chassis.  
0 (no redundancy)  
1 (AC redundancy)  
2 (power supply redundancy)  
0 (no redundancy)  
Default  
cfgChassisDynamicPSUEngagementEnable (Read/Write)  
Description  
Legal Values  
Enables or disables dynamic engagement.  
0 (disabled)  
1 (enabled)  
0 (disabled)  
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
228  
iDRAC6 and CMC Property Database Group and Object Descriptions  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgChassisAllow110VACOperation (Read/Write)  
Description  
Enables or disables normal chassis power allocations when any  
power supply unit is connected to 110V AC service. If disabled and  
110V power supplies are detected, all subsequent server power  
allocation requests are denied. In this mode additional servers  
cannot be powered on, regardless of server priority.  
Legal Values  
Default  
0 (disabled)  
1 (enabled)  
0 (disabled)  
cfgChassisMaxPowerConservationMode (Read/Write)  
Description  
Enables or disables max power conservation mode. When enabled,  
all servers are immediately reduced to their minimum power levels,  
and all subsequent server power allocation requests are denied. In  
this mode performance of powered on servers may be degraded, and  
additional servers cannot be powered on, regardless of server  
priority.  
Legal Values  
Default  
0 (disabled)  
1 (enabled)  
0 (disabled)  
cfgChassisPerformanceOverRedundancy (Read/Write)  
Description  
Enables or disables server performance over power redundancy.  
When enabled, this option favors server performance and server  
powerup, over maintaining power redundancy. When disabled, the  
system favors power redundancy over server performance. When  
disabled, then if the power supplies in the chassis do not provide  
sufficient power, both for redundancy, as well as full performance,  
then some servers may not be granted sufficient power for full  
performance, or may not be powered on, in order to maintain  
redundancy.  
Legal Values  
Default  
0 (disabled)  
1 (enabled)  
1 (enabled)  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
229  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgChassisInMaxPowerCapacity (Read Only)  
Indicates the total chassis power budget (in watts) available for chassis  
operation.  
cfgChassisInRedundancyReserve (Read Only)  
Indicates the amount of redundant power (in watts) in reserve that can be  
utilized in the event of an AC grid or PSU failure. This value is 0 if the  
Redundancy Policy is set to 0 (no redundancy).  
cfgChassisInPowerServerAllocation (Read Only)  
Indicates (in watts) the cumulative power allocated to servers. There is no  
default as this parameter is very specific to the particular customer  
configuration.  
cfgChassisInfrastructureInPowerAllocation (Read Only)  
Indicates the estimated cumulative DC output power consumption (in  
watts), determined from a field replaceable unit (FRU) on the hardware  
modules in the chassis.  
cfgChassisTotalInPowerAvailable (Read Only)  
Indicates the amount of power (in watts) available for use by the chassis.  
cfgChassisStandbyInPowerCapacity (Read Only)  
Indicates the amount of power (in watts) available for powering up any  
hardware modules that are either added to the chassis or powered up (if they  
are already present in the chassis).  
cfgChassisPowerClear (Write Only)  
To reset cfgChassisMinPower and cfgChassisMaxPowerCapacity, set this  
object to 1.  
cfgChassisPowerClearTimestamp (Read Only)  
Time stamp when cfgChassisMinPower and cfgChassisMaxPowerCapacity  
were reset.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
230  
iDRAC6 and CMC Property Database Group and Object Descriptions  
               
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgChassisPowerButtonEnable (Read/Write)  
Description  
Legal Values  
Indicates if the chassis power button is enabled or disabled.  
0 (disabled)  
1 (enabled).  
None  
Default  
cfgSystemEnergyConsumptionClear (Write Only)  
To reset energy statistics, set this value to 1.  
Examples  
racadm getconfig -g cfgChassisPower  
# cfgChassisInPower=0 W | 0 BTU/hr  
# cfgChassisPeakPower=0 W  
# cfgChassisPeakPowerTimestamp=06:32:55 01/26/2009  
# cfgChassisMinPower=0 W  
# cfgChassisMinPowerTimestamp=06:32:55 01/26/2009  
# cfgChassisPowerStatus=5  
# cfgChassisRedundantState=0  
cfgChassisPowerCap=16685 W  
cfgChassisPowerCapF=16685 W  
cfgChassisPowerCapBTU=56931 BTU/hr  
cfgChassisPowerCapFBTU=56931 BTU/hr  
cfgChassisPowerCapPercent =100%  
cfgChassisPowerCapFPercent =100%  
cfgChassisRedundancyPolicy=0  
cfgChassisDynamicPSUEngagementEnable=0  
# cfgChassisInMaxPowerCapacity=0 W  
# cfgChassisInRedundancyReserve=0 W  
# cfgChassisInPowerServerAllocation=0 W  
# cfgChassisInfrastructureInPowerAllocation=51 W  
# cfgChassisTotalInPowerAvailable=0 W  
# cfgChassisStandbyInPowerCapacity=0 W  
# cfgChassisPowerClear=******** (Write-Only)  
# cfgChassisPowerClearTimestamp=18:00:00 12/31/1969  
cfgChassisPowerButtonEnable=1  
cfgChassisAllow110VACOperation=0  
cfgChassisMaxPowerConservationMode=0  
cfgChassisPerformanceOverRedundancy=1  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
231  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgSystemEnergyConsumptionClear = ****(Write-Only)  
racadm config -g cfgChassisPower  
-o cfgChassisPowerClear 1  
Clears cfgChassisMinPower and cfgChassisPeakPower  
.
cfgIpmiSol  
This group is applicable only for iDRAC6 and is used to configure the Serial  
Over LAN (SOL) capabilities of the system.  
The following sections provides information about the objects in the  
cfgIpmiSol group.  
cfgIpmiSolEnable (Read/Write)  
Description  
Legal Values  
Enables or disables SOL.  
1 (TRUE)  
0 (FALSE)  
1
Default  
cfgIpmiSolBaudRate (Read/Write)  
Description  
Legal Values  
Default  
The baud rate for serial communication over LAN.  
9600, 19200, 57600, 115200  
115200  
cfgIpmiSolMinPrivilege (Read/Write)  
Description  
Legal Values  
Specifies the minimum privilege level required for SOL access.  
2 (User)  
3 (Operator)  
4 (Administrator)  
4
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
232  
iDRAC6 and CMC Property Database Group and Object Descriptions  
         
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgIpmiSolAccumulateInterval (Read/Write)  
Description  
Specifies the typical amount of time that iDRAC6 waits before  
transmitting a partial SOL character data packet. This value is 1-  
based 5ms increments.  
Legal Values  
Default  
1 – 255  
10  
cfgIpmiSolSendThreshold (Read/Write)  
Description  
The SOL threshold limit value. Specifies the maximum number of  
bytes to buffer before sending an SOL data packet.  
Legal Values  
Default  
1 – 255  
255  
cfgIpmiLan  
This group is applicable only for iDRAC6 and is used to configure the IPMI  
over LAN capabilities of the system.  
The following sections provides information about the objects in the  
cfgIpmiLan group.  
cfgIpmiLanEnable (Read/Write)  
Description  
Legal Values  
Enables or disables the IPMI over LAN interface.  
1 (TRUE)  
0 (FALSE)  
0
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
233  
         
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgIpmiLanPrivLimit (Read/Write)  
Description  
Legal Values  
Specifies the maximum privilege level allowed for IPMI over LAN  
access.  
2 (User)  
3 (Operator)  
4 (Administrator)  
4
Default  
cfgIpmiLanAlertEnable (Read/Write)  
Description  
Legal Values  
Enables or disables global e-mail alerting. This property overrides  
all individual e-mail alerting enable/disable properties.  
1 (TRUE)  
0 (FALSE)  
0
Default  
cfgIpmiEncryptionKey (Read/Write)  
Description  
Legal Values  
The IPMI encryption key.  
A string of hexadecimal digits from 0 to 40 characters with no  
spaces. Only an even amount of digits is allowed.  
Default  
0000000000000000000000000000000000000000  
cfgIpmiPetCommunityName (Read/Write)  
Description  
Legal Values  
Default  
The SNMP community name for traps.  
A string of up to 18 characters.  
public  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
234  
iDRAC6 and CMC Property Database Group and Object Descriptions  
         
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgIpmiPetIpv6  
This group is applicable only for iDRAC6 and is used to configure IPv6  
platform event traps on the managed server.  
The following sections provides information about the objects in the  
cfgIpmiPetIpv6 group.  
cfgIpmiPetIPv6Index (Read Only)  
Description  
Legal Values  
Default  
Unique identifier for the index corresponding to the trap.  
1 – 4  
<index value>  
cfgIpmiPetIPv6AlertDestIpAddr  
Description  
Legal Values  
Default  
Configures the IPv6 alert destination IP address for the trap.  
IPv6 address  
<blank>  
cfgIpmiPetIPv6AlertEnable (Read/Write)  
Description  
Legal Values  
Enables or disables the IPv6 alert destination for the trap.  
1 (TRUE)  
0 (FALSE)  
0
Default  
cfgIpmiPef  
This group is applicable only for iDRAC6 and is used to configure the  
platform event filters available on the managed server.  
The event filters can be used to control policy related to actions that are  
triggered when critical events occur on the managed server.  
The following sections provides information about the objects in the  
cfgIpmiPef group.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
235  
           
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgIpmiPefName (Read Only)  
Description  
Legal Values  
Default  
Specifies the name of the platform event filter.  
A string of up to 255 characters.  
The name of the index filter.  
cfgIpmiPefIndex (Read/Write)  
Description  
Legal Values  
Specifies the index of a specific platform event filter.  
For iDRAC6 on Rack and Tower Servers: 1 – 22  
For iDRAC6 Enterprise on Blade Servers: 1-9  
The index value of a platform event filter object.  
Default  
cfgIpmiPefAction (Read/Write)  
Description  
Legal Values  
Specifies the action that is performed on the managed server when  
the alert is triggered.  
NOTE: For iDRAC6 on Rack and Tower servers, this object is read-only  
for indexes 20, 21, and 22.  
0 (None)  
1 (Power Down)  
2 (Reset)  
3 (Power Cycle)  
0
Default  
cfgIpmiPefEnable (Read/Write)  
Description  
Legal Values  
Enables or disables a specific platform event filter.  
1 (TRUE)  
0 (FALSE)  
1
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
236  
iDRAC6 and CMC Property Database Group and Object Descriptions  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgIpmiPet  
This group is applicable only for iDRAC6 and is used to configure platform  
event traps on the managed server.  
The following sections provides information about the objects in the  
cfgIpmiPet group.  
cfgIpmiPetIndex (Read Only)  
Description  
Legal Values  
Default  
Unique identifier for the index corresponding to the trap.  
1-4  
The index value of a specific platform event trap.  
cfgIpmiPetAlertDestIpAddr (Read/Write)  
Description  
Specifies the destination IPv4 address for the trap receiver on the  
network. The trap receiver receives an SNMP trap when an event is  
triggered on the managed server.  
Legal Values  
Default  
A string representing a valid IPv4 address. For example,  
192.168.0.67.  
0.0.0.0  
cfgIpmiPetAlertEnable (Read/Write)  
Description  
Legal Values  
Enables or disables a specific trap.  
1 (TRUE)  
0 (FALSE)  
0
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
237  
           
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgUserDomain  
This group is applicable only for iDRAC6 and is used to configure the Active  
Directory user domain names. A maximum of 40 domain names can be  
configured at any given time.  
The following sections provides information about the objects in the  
cfgUserDomain group.  
cfgUserDomainIndex (Read Only)  
Description  
Legal Values  
Default  
Represents a specific domain.  
1 – 40  
The index value.  
cfgUserDomainName (Read Only)  
Description  
Legal Values  
Default  
Specifies the Active Directory user domain name.  
A string of up to 255 ASCII characters.  
<blank>  
cfgServerPower  
This group provides several power management features.  
The following sections provides information about the objects in the  
cfgServerPower group.  
cfgServerPowerStatus (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Represents the server power state, either ON or OFF.  
1 (ON)  
0 (OFF)  
0
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
238  
iDRAC6 and CMC Property Database Group and Object Descriptions  
         
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerPowerAllocation (Read Only)  
NOTE: This object is applicable only for iDRAC6 on Rack and Tower Servers and  
not for iDRAC6 Enterprise on Blade Servers or CMC. For iDRAC6 on Rack and Tower  
Servers the object is available only under Modular FW and Remote RACADM, and  
not in Local RACADM.  
Description  
Represents the available allocated power supply for server usage.  
NOTE: In case of more than one power supply, this object represents  
the minimum capacity power supply.  
Legal Values  
Default  
A string of up to 32 characters.  
<blank>  
cfgServerActualPowerConsumption (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
Represents the power consumed by the server at the current time.  
A string of up to 32 characters.  
<blank>  
cfgServerPowerCapEnable (Read Only)  
NOTE: This object is applicable only for iDRAC6 on Rack and Tower Servers and  
not for iDRAC6 Enterprise on Blade Servers or CMC.  
Description  
Legal Values  
Enables or disables the user specified power budget threshold.  
0 - Disables the user specified power budget threshold  
1- Enables the user specified power budget threshold  
1
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
239  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerMinPowerCapacity (Read Only)  
NOTE: This object is applicable only for iDRAC6 on Rack and Tower Servers and  
not for iDRAC6 Enterprise on Blade Servers or CMC.  
Description  
Legal Values  
Default  
Represents the minimum server power capacity.  
A string of up to 32 characters.  
<blank>  
cfgServerMaxPowerCapacity (Read Only)  
NOTE: This object is applicable only for iDRAC6 on Rack and Tower Servers and  
not for iDRAC6 Enterprise on Blade Servers or CMC.  
Description  
Legal Values  
Default  
Represents the maximum server power capacity.  
A string of up to 32 characters.  
<blank>  
cfgServerPeakPowerConsumption (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Represents the maximum power consumed by the server until the  
current time.  
Legal Values  
Default  
A string of up to 32 characters.  
<current server peak power consumption>  
cfgServerPeakPowerConsumptionTimestamp (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
Time when the maximum power consumption was recorded.  
A string of up to 32 characters.  
Maximum power consumption timestamp.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
240  
iDRAC6 and CMC Property Database Group and Object Descriptions  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerPowerConsumptionClear (Write Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Resets the cfgServerPeakPowerConsumption (Read/Write)  
property to 0 and the cfgServerPeakPowerConsumptionTimestamp  
property to the current iDRAC time.  
Legal Values  
Default  
1 (TRUE)  
0 (FALSE)  
None  
cfgServerPowerCapWatts (Read/Write)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
Represents the server power threshold in Watts.  
A string of up to 32 characters.  
Server power threshold in Watts.  
cfgServerPowerCapBtuhr (Read/Write)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
Represents the server power threshold in BTU/hr.  
A string of up to 32 characters.  
Server power threshold in BTU/hr.  
cfgServerPowerCapPercent (Read/Write)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
Represents the server power threshold in percentage.  
A string of up to 32 characters.  
Server power threshold in percentage.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
241  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerPowerLastMinAvg (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
Displays the average power value during the last minute.  
A string of up to 32 characters.  
Average power value during the last minute.  
cfgServerPowerLastHourAvg (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
Displays the average power value during the last hour.  
A string of up to 32 characters.  
Average power value during the last hour.  
cfgServerPowerLastDayAvg (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
Displays the average power value during the last day.  
A string of up to 32 characters.  
Average power value during the last day.  
cfgServerPowerLastWeekAvg (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
Displays the average power value during the last week.  
A string of up to 32 characters.  
Average power value during the last week.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
242  
iDRAC6 and CMC Property Database Group and Object Descriptions  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerPowerLastHourMinPower (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
Displays the minimum power value during the last hour.  
A string of up to 32 characters.  
Minimum power value during the last hour.  
cfgServerPowerLastHourMinTime (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Displays the timestamp of minimum power value during the last  
minute.  
A string of up to 32 characters.  
Time in the format: DD MM Date YYYY HH:MM:SS  
where,  
• DD= Day of the week  
• MM= Month  
• Date=Date  
• YYYY = Year  
• HH = hour  
• MM=Minutes  
• SS = Seconds  
Default  
Minimum power value during the last minute.  
cfgServerPowerLastHourMaxPower (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
Displays the maximum power value during the last hour.  
A string of up to 32 characters.  
Maximum power value during the last hour.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
243  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerPowerLastHourMaxTime (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Displays the timestamp of maximum power value during the last  
hour.  
A string of up to 32 characters.  
Time in the format: DD MM Date YYYY HH:MM:SS  
where,  
• DD= Day of the week  
• MM= Month  
• Date=Date  
• YYYY = Year  
• HH = hour  
• MM=Minutes  
• SS = Seconds  
Default  
Maximum power value during the last hour.  
cfgServerPowerLastDayMinPower (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
Displays the minimum power value during the last day.  
A string of up to 32 characters.  
Minimum power value during the last day.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
244  
iDRAC6 and CMC Property Database Group and Object Descriptions  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerPowerLastDayMinPowerTime (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Displays the timestamp of minimum power value during the last  
day.  
A string of up to 32 characters.  
Time in the format: DD MM Date YYYY HH:MM:SS  
where,  
• DD = Day of the week  
• MM = Month  
• Date = Date  
• YYYY = Year  
• HH = hour  
• MM = Minutes  
• SS = Seconds  
Default  
Minimum power value during the last day.  
cfgServerPowerLastDayMaxPower (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
Displays the maximum power value during the last day.  
A string of up to 32 characters.  
Maximum power value during the last day.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
245  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerPowerLastDayMaxPowerTime (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Displays the timestamp of maximum power value during the last  
day.  
A string of up to 32 characters.  
Time in the format: DD MM Date YYYY HH:MM:SS  
where,  
• DD = Day of the week  
• MM = Month  
• Date = Date  
• YYYY = Year  
• HH = hour  
• MM = Minutes  
• SS = Seconds  
Default  
Maximum power value during the last day.  
cfgServerPowerLastWeekMinPower (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
Displays the minimum power value during the last week.  
A string of up to 32 characters.  
Minimum power value during the last week.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
246  
iDRAC6 and CMC Property Database Group and Object Descriptions  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerPowerLastWeekMinPowerTime (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Displays the timestamp of minimum power value during the last  
week.  
A string of up to 32 characters.  
Time in the format: DD MM Date YYYY HH:MM:SS  
where,  
• DD = Day of the week  
• MM = Month  
• Date = Date  
• YYYY = Year  
• HH = hour  
• MM = Minutes  
• SS = Seconds  
Default  
Minimum power value during the last week  
cfgServerPowerLastWeekMaxPower (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
Displays the maximum power value during the last week.  
A string of up to 32 characters.  
Maximum power value during the last week.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
247  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerPowerLastWeekMaxPowerTime (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Displays the timestamp of maximum power value during the last  
week.  
A string of up to 32 characters.  
Time in the format: DD MM Date YYYY HH:MM:SS  
where,  
• DD = Day of the week  
• MM= Month  
• Date = Date  
• YYYY = Year  
• HH = hour  
• MM = Minutes  
• SS = Seconds  
Default  
Maximum power value during the last week.  
cfgServerPowerInstHeadroom (Read Only)  
NOTE: This object is applicable only for iDRAC6 on Rack and Tower Servers and  
not for iDRAC6 Enterprise on Blade Servers.  
Description  
Displays the difference between the available power and the current  
power consumption.  
Legal Values  
Default  
A string of up to 32 characters.  
Difference between the available power and the current power  
consumption.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
248  
iDRAC6 and CMC Property Database Group and Object Descriptions  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerPowerPeakHeadroom (Read Only)  
NOTE: This object is applicable only for iDRAC6 on Rack and Tower Servers and  
not for iDRAC6 Enterprise on Blade Servers or CMC.  
Description  
Displays the difference between the available power and the peak  
power consumption.  
Legal Values  
Default  
A string of up to 32 characters.  
Difference between the available power and the peak power  
consumption.  
cfgServerActualAmperageConsumption (Read Only)  
NOTE: This object is applicable only for iDRAC6  
Description  
Legal Values  
Default  
Displays the current power consumption.  
A string of up to 32 characters.  
Current power consumption.  
cfgServerPeakAmperage (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
Displays the current peak power consumption.  
A string of up to 32 characters.  
Current peak power consumption.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
249  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerPeakAmperageTimeStamp (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Displays the timestamp of the current peak power consumption.  
A string of up to 32 characters.  
Time in the format: DD MM Date YYYY HH:MM:SS  
where,  
• DD = Day of the week  
• MM = Month  
• Date = Date  
• YYYY = Year  
• HH = hour  
• MM = Minutes  
• SS = Seconds  
Default  
Timestamp of the current peak power consumption.  
cfgServerCumulativePowerConsumption (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
Displays the cumulative power consumption.  
A string of up to 32 characters.  
Cumulative power consumption.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
250  
iDRAC6 and CMC Property Database Group and Object Descriptions  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerCumulativePowerConsumptionTimeStamp (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Displays the timestamp of the cumulative power consumption.  
A string of up to 32 characters.  
Time in the format: DD MM Date YYYY HH:MM:SS  
where,  
• DD = Day of the week  
• MM= Month  
• Date=Date  
• YYYY = Year  
• HH = hour  
• MM=Minutes  
• SS = Seconds  
Default  
Timestamp of the cumulative power consumption.  
cfgServerCumulativePowerClear (Write Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Clears the cfgServerCumulativePowerConsumption and  
cfgServerCumulativePowerConsumptionTimeStamp values.  
Legal Values  
Default  
A string of up to 32 characters.  
None  
cfgServerPeakPowerClear (Write Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Clears the cfgServerPeakPowerConsumption and  
cfgServerPeakPowerConsumptionTimestamp values.  
Legal Values  
Default  
A string of up to 32 characters.  
None  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
251  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerPowerPCIeAllocation (Read/Write)  
NOTE: This object is applicable only for iDRAC6.  
NOTE: This object is applicable for iDRAC6 Enterprise only for specific Blade  
Servers and not for iDRAC6 on Rack and Tower Servers or CMC.  
NOTE: You must have Administrator privileges to modify the value for this object..  
Description  
Legal Values  
Amount of power allocated to the PCIe cards.  
0W: For platforms that do not support PCIe cards.  
100W - 500W: For platforms that support PCIe cards.  
0: For platforms that do not support PCIe cards.  
500W: For platforms that support PCIe cards.  
Default  
cfgKVMInfo  
NOTE: This object is applicable only for CMC.  
NOTE: Use this object with the config or getconfig subcommands.  
NOTE: To use this object property, you must have Chassis Configuration  
Administrator privilege.  
NOTE: You can configure any setting that is not preceded by the hash sign (#) in the  
output. To modify a configurable object, use the -o option.  
This group is used to display information for and configure the iKVM.  
cfgKVMAccessToCMCEnable  
Description  
Legal Values  
Enables or disables the Dell CMC Console access on the iKVM.  
1 (enable)  
0 (disable)  
None  
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
252  
iDRAC6 and CMC Property Database Group and Object Descriptions  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgKVMFrontPanelEnable  
Description  
Legal Values  
Enables or disables front panel access on the iKVM.  
1 (enable)  
0 (disable)  
None  
Default  
Example  
racadm getconfig -g cfgKVMInfo  
cfgKVMAccessToCMCEnable=1  
cfgKVMFrontPanelEnable=1  
cfgAlerting  
NOTE: This object is applicable only for CMC.  
NOTE: Use this object with the config or getconfig subcommands.  
NOTE: To use this object property, you must have Chassis Configuration  
Administrator privilege.  
This group is used to enables or disable SNMP event trap alerting and set the  
event filter.  
cfgAlertingEnable  
Description  
Legal Values  
Enables or disables event traps on the CMC.  
1 (true)  
0 (false)  
None  
Default  
cfgAlertingFilterMask  
Description  
Legal Values  
Default  
Sets the event filter  
Hex values 0x0 – 0x01ffffff  
0x17ff8db  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
253  
         
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgAlertingSourceEmailName  
Description  
E-mail address used to send e-mail notifications when an event  
occurs.  
Legal Values  
Default  
None  
None  
Examples  
racadm getconfig -g cfgAlerting -o  
cfgAlertingEnable 1  
racadm config -g cfgAlerting -o cfgAlertingEnable  
1
Object value modified successfully.  
cfgServerPowerSupply  
This group is applicable only for iDRAC6 and contains information related to  
the power supplies. The following sections provide information about the  
objects in the cfgServerPowerSupply group.  
NOTE: The cfgServerPowerSupply object group is applicable only for iDRAC6 on  
Rack and Tower Servers and not for iDRAC6 Enterprise on Blade Servers.  
NOTE: The getconfig subcommand always shows eight cfgServerPowerSupply  
indexes, even if two power supplies are installed in the system or the system  
supports a maximum of two power supply units. For the uninstalled and  
unsupported units, all the objects in the cfgServerPowerSupply group displays a  
value of 0.  
cfgServerPowerSupplyIndex  
Description  
Legal Values  
Default  
Index of the power supply unit.  
Integer from 1-8  
None  
NOTE: Indexes from 1 – 8 are supported to support up to 8 power supply units. If  
any power supply unit is not present, cfgServerPowerSupplyOnlineStatus is absent  
and for all the other properties, it is 0.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
254  
iDRAC6 and CMC Property Database Group and Object Descriptions  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerPowerSupplyMaxInputPower (Read Only)  
Description  
Legal Values  
Default  
Displays the AC input rated power in Watts.  
A string of up to 32 characters.  
0
cfgServerPowerSupplyMaxOutputPower (Read Only)  
Description  
Legal Values  
Default  
Displays the AC output rated power in Watts.  
A string of up to 32 characters.  
0
cfgServerPowerSupplyOnlineStatus (Read Only)  
Description  
Legal Values  
Displays the status of the power supply unit.  
• 0 - Present  
• 1 - Absent  
• 2 - Failure  
• 3 - Predictive failure  
0
Default  
cfgServerPowerSupplyFwVer (Read Only)  
Description  
Legal Values  
Default  
Displays the firmware version of the power supply unit.  
A string up to 8 characters.  
Null  
cfgServerPowerSupplyCurrentDraw (Read Only)  
Description  
Legal Values  
Default  
Displays the instantaneous current consumption in 0.1 Amps.  
A string of up to 32 characters.  
0
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
255  
         
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgServerPowerSupplyType  
Description  
Legal Values  
Default  
Displays whether the power supply is AC or DC.  
A string of up to 32 characters.  
0
cfgIPv6LanNetworking  
This group is used to configure the IPv6 over LAN networking capabilities.  
NOTE: Use this object with the config or getconfig subcommands.  
NOTE: To use this object property for CMC, you must have Chassis Configuration  
Administrator privilege.  
NOTE: Use the -m option to apply this setting to iDRAC.  
The following sections provides information about the objects in the  
cfgIPv6LanNetworking group.  
cfgIPv6Enable (Read/Write)  
Description  
Legal Values  
Enables or disables iDRAC6 or CMC IPv6 stack.  
1 (TRUE)  
0 (FALSE)  
0
Default  
cfgIPv6Address  
NOTE: This object is applicable only for CMC.  
Description  
Legal Values  
Default  
Assigns a static IPv6 address to the CMC. This property is used  
only if cfgIPv6AutoConfig is set to 0 (false).  
A string representing a valid IPv6 address. For example,  
2001:DB8:1234:5678:9ABC:DE11:C00C:BEEF  
::  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
256  
iDRAC6 and CMC Property Database Group and Object Descriptions  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgIPv6Address1 (Read/Write)  
Description  
Legal Values  
Default  
iDRAC6 or CMC IPv6 address.  
String representing a valid IPv6 entry.  
::  
cfgIPv6Gateway (Read/Write)  
Description  
iDRAC6 or CMC gateway IPv6 address.  
NOTE: For CMC, this property is used only if cfgIPv6AutoConfig is set  
to 0 (false)  
Legal Values  
Default  
String representing a valid IPv6 entry.  
::  
cfgIPv6PrefixLength (Read/Write)  
Description  
The prefix length for iDRAC6 or CMC IPv6 address1.  
NOTE: For CMC, this property is used only if cfgIPv6AutoConfig is set  
to 0 (false)  
Legal Values  
Default  
For iDRAC6: 1-128  
For CMC: 0-128  
64  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
257  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgIPv6AutoConfig (Read/Write)  
Description  
Enables or disables the IPv6 Auto Configuration option.  
NOTE: If this value is set to 0, the CMC disables auto configuration  
and statically assigns IPv6 addresses. If this value is set to 1, the CMC  
obtains address and route information using stateless auto  
configuration and DHCPv6.  
Legal Values  
Default  
1 (TRUE)  
0 (FALSE)  
For iDRAC6: 0  
For CMC: 1  
NOTE: The CMC uses its MAC address for its DUID (DUID-LL) when communicating  
with a DHCPv6 server.  
cfgIPv6LinkLocalAddress (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
The iDRAC6 IPv6 link local address.  
A string representing a valid IPv6 entry.  
::  
cfgIPv6Address2 (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
The iDRAC6 IPv6 second address.  
A string representing a valid IPv6 entry.  
::  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
258  
iDRAC6 and CMC Property Database Group and Object Descriptions  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgIPv6Address3 (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
The iDRAC6 IPv6 third address.  
String representing a valid IPv6 entry.  
::  
cfgIPv6Address4 (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
The iDRAC6 IPv6 fourth address.  
String representing a valid IPv6 entry.  
::  
cfgIPv6Address5 (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
The iDRAC6 IPv6 fifth address.  
String representing a valid IPv6 entry.  
::  
cfgIPv6Address6 (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
The iDRAC6 IPv6 sixth address.  
String representing a valid IPv6 entry.  
::  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
259  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgIPv6Address7 (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
The iDRAC6 IPv6 seventh address.  
String representing a valid IPv6 entry.  
::  
cfgIPv6Address8 (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
The iDRAC6 IPv6 eighth address.  
String representing a valid IPv6 entry.  
::  
cfgIPv6Address9 (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
The iDRAC6 IPv6 ninth address..  
String representing a valid IPv6 entry.  
::  
cfgIPv6Address10 (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
The iDRAC6 IPv6 tenth address.  
String representing a valid IPv6 entry.  
::  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
260  
iDRAC6 and CMC Property Database Group and Object Descriptions  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgIPv6Address11 (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
The iDRAC6 IPv6 eleventh address.  
String representing a valid IPv6 entry.  
::  
cfgIPv6Address12 (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
The iDRAC6 IPv6 twelfth address.  
String representing a valid IPv6 entry.  
::  
cfgIPv6Address13 (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
The iDRAC6 IPv6 thirteenth address.  
String representing a valid IPv6 entry.  
::  
cfgIPv6Address14 (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
The iDRAC6 IPv6 fourteenth address.  
String representing a valid IPv6 entry.  
::  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
261  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgIPv6Address15 (Read Only)  
NOTE: This object is applicable only for iDRAC6.  
Description  
Legal Values  
Default  
The iDRAC6 IPv6 fifteenth address.  
String representing a valid IPv6 entry.  
::  
cfgIPv6DNSServersFromDHCP6 (Read/Write)  
Description  
Specifies whether cfgIPv6DNSServer1 and cfgIPv6DNSServer2 are  
static or DHCP IPv6 addresses.  
NOTE: For CMC, this property is used only if cfgIPv6AutoConfig is set  
to 1 (true).  
Legal Values  
Default  
1 (TRUE)  
0 (FALSE)  
For iDRAC6: 0  
For CMC: 1  
cfgIPv6DNSServer1 (Read/Write)  
Description  
An IPv6 DNS server address.  
NOTE: For CMC, this property is used only if  
cfgIPv6DNSServersFromDHCP6 is set to 0 (false).  
Legal Values  
Default  
A string representing a valid IPv6 entry. For example,  
2001:DB8:1234:5678:9ABC:DE11:C00C:BEEF  
::  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
262  
iDRAC6 and CMC Property Database Group and Object Descriptions  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgIPv6DNSServer2 (Read/Write)  
Description  
An IPv6 DNS server address.  
NOTE: This property is only valid if cfgIPv6DNSServersFromDHCP6 is  
set to 0 (false).  
Legal Values  
A string representing a valid IPv6 entry. For example,  
2001:DB8:1234:5678:9ABC:DE11:C00C:BEEF  
::  
Default  
Example  
$ racadm getconfig -g cfgIPv6LanNetworking [-m server-  
<n>]  
cfgIPv6Enable=1  
cfgIPv6AutoConfig=1  
cfgIPv6Address=::  
cfgIPv6PrefixLength=64  
cfgIPv6Gateway=::  
cfgIPv6DNSServersFromDHCP6=1  
cfgIPv6DNSServer1=::  
cfgIPv6DNSServer2=::  
If both IPv4 and IPv6 are enabled on the CMC, IPv6 DNS servers take  
priority. The order of preference for DNS servers is:  
cfgIPv6DNSServer1  
cfgIPv6DNSServer2  
cfgDNSServer1  
cfgDNSServer2  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
263  
 
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgCurrentLanNetworking (Read only)  
This group displays the current CMC NIC properties.  
NOTE: This object property is applicable only for CMC. Use this object with the  
getconfig subcommand.  
NOTE: To use this object property, you must have CMC Login User privilege.  
Synopsis  
racadm getconfig -g cfgCurrentLanNetworking  
cfgNicCurrentIpAddress  
Displays the static IP address to the CMC.  
cfgNicCurrentNetmask  
Displays the static subnet mask for the CMC IP address.  
cfgNicCurrentGateway  
Displays the static gateway for the CMC IP address.  
cfgNicCurrentDhcpWasUsed  
Description  
Indicates whether DHCP is used to configure the NIC.  
Legal Values  
0 – address is static.  
1– address was obtained from the DHCP server.  
None  
Default  
cfgDNSCurrentServer1  
Displays the IP address for DNS server 1.  
cfgDNSCurrentServer2  
Displays the IP address for DNS server 2.  
cfgDNSCurrentDomainName  
Displays the DNS domain name.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
264  
iDRAC6 and CMC Property Database Group and Object Descriptions  
                 
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgNicCurrentIPv4Enabled  
Indicates whether IPv4 is enabled on the CMC. If the current property value  
is set to 0 (false), the remote network interfaces to the CMC are not  
accessible over IPv4.  
Example  
racadm getconfig -g cfgCurrentLanNetworking  
# cfgNicCurrentIPv4Enabled=1  
# cfgNicCurrentIpAddress=143.166.152.116  
# cfgNicCurrentNetmask=255.255.255.0  
# cfgNicCurrentGateway=143.166.152.1  
# cfgNicCurrentDhcpWasUsed=0  
# cfgNicCurrentVlanEnable=0  
# cfgNicCurrentVlanID=1  
# cfgNicCurrentVlanPriority=0  
# cfgDNSCurrentServer1=192.168.0.5  
# cfgDNSCurrentServer2=192.168.0.6  
# cfgDNSCurrentDomainName=MYDOMAIN  
cfgCurrentIPv6LanNetworking (Read only)  
This group displays the current CMC IPv6 properties.  
NOTE: This object property is applicable only for CMC. Use this object with the  
getconfig subcommand.  
NOTE: To use this object property, you must have CMC Login User privilege.  
cfgCurrentIPv6Enabled  
Indicates whether IPv6 is enabled on the CMC. If the current property value  
is set to 0 (false), the remote network interfaces to the CMC are not  
accessible over IPv6.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
265  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgCurrentIPv6AutoConfigWasUsed  
Description  
Indicates whether auto configuration is used to obtain IPv6  
settings, including stateless IPv6 address(es) and gateway.  
Legal Values  
0 (static addressing is used)  
1 (address is obtained from the DHCPv6 server and/or stateless  
auto configuration)  
Default  
None  
cfgCurrentLinkLocalAddress  
Displays the current IPv6 link-local address of the CMC.  
cfgCurrentIPv6Address1  
Displays the current IPv6 addresses. This property displays up to 15 global  
IPv6 addresses, including stateful and stateless addresses.  
cfgCurrentIPv6Gateway  
Displays the current IPv6 gateway.  
cfgCurrentIPv6DNSServersFromDHCP6  
Indicates whether the DNS server addresses are assigned from the DHCPv6  
server.  
cfgCurrentIPv6DNSServer1  
Displays the IPv6 address for DNS server 1.  
cfgCurrentIPv6DNSServer2  
Displays the IPv6 address for DNS server 2.  
Example  
$ racadm getconfig -g cfgCurrentIPv6LanNetworking  
# cfgCurrentIPv6Enabled=1  
# cfgCurrentIPv6AutoConfigWasUsed=1  
# cfgCurrentLinkLocalAddress=  
fe80::21e:4fff:fe1f:5371/64  
# cfgCurrentIPv6Address1=  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
266  
iDRAC6 and CMC Property Database Group and Object Descriptions  
             
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
2009:123::e48f:9dd8:6f51:a669/64  
# cfgCurrentIPv6Address2=  
fd88:1::21e:4fff:fe1f:5371/64  
# cfgCurrentIPv6Address3=  
fd88:2::21e:4fff:fe1f:5371/64  
# cfgCurrentIPv6Gateway=fe80::21c:23ff:fe77:6215  
# cfgCurrentIPv6DNSServersFromDHCP6=1  
# cfgCurrentIPv6DNSServer1=2009:123::1  
# cfgCurrentIPv6DNSServer2=::  
cfgIPv6URL  
This group specifies properties used to configure iDRAC6 IPv6 URL.  
The following sections provides information about the objects in the  
cfgIPv6URL group.  
cfgIPv6URLstring (Read Only)  
Description  
Legal Values  
Default  
The iDRAC6 IPv6 URL.  
A string of up to 80 characters.  
<blank>  
cfgIpmiSerial  
This group is applicable only for iDRAC6 and specifies properties used to  
configure the IPMI serial interface of the BMC.  
NOTE: The cfgIpmiSerial object group is applicable only for iDRAC6 on Rack and  
Tower Servers and not for iDRAC6 Enterprise on Blade Servers or CMC.  
cfgIpmiSerialBaudRate (Read/Write)  
Description  
Legal Values  
Default  
Specifies the baud rate for a serial connection over IPMI.  
9600, 19200, 57600, 115200  
57600  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
267  
         
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgIpmiSerialConnectionMode (Read/Write)  
Description When the iDRAC6 cfgSerialConsoleEnable property is set to 0  
(disabled), the iDRAC6 serial port becomes the IPMI serial port. This  
property determines the IPMI defined mode of the serial port.  
In Basic mode, the port uses binary data with the intent of  
communicating with an application program on the serial client. In  
Terminal mode, the port assumes that a dumb ASCII terminal is  
connected and allows very simple commands to be entered.  
Legal Values 0 (Terminal)  
1 (Basic)  
Default  
1
cfgIpmiSerialChanPrivLimit (Read/Write)  
Description  
Legal Values  
Specifies the maximum privilege level allowed on the IPMI serial  
channel.  
2 (User)  
3 (Operator)  
4 (Administrator)  
4
Default  
cfgIpmiSerialFlowControl (Read/Write)  
Description  
Legal Values  
Specifies the flow control setting for the IPMI serial port.  
0 (None)  
1 (CTS/RTS)  
1
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
268  
iDRAC6 and CMC Property Database Group and Object Descriptions  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgIpmiSerialHandshakeControl (Read/Write)  
Description  
Legal Values  
Enables or disables the IPMI terminal mode handshake control.  
0 (FALSE)  
1 (TRUE)  
1
Default  
cfgIpmiSerialLineEdit (Read/Write)  
Description  
Legal Values  
Enables or disables line editing on the IPMI serial interface.  
0 (FALSE)  
1 (TRUE)  
1
Default  
cfgIpmiSerialEchoControl (Read/Write)  
Description  
Legal Values  
Enables or disables echo control on the IPMI serial interface.  
0 (FALSE)  
1 (TRUE)  
1
Default  
cfgIpmiSerialDeleteControl (Read/Write)  
Description  
Legal Values  
Enables or disables delete control on the IPMI serial interface.  
0 (FALSE)  
1 (TRUE)  
0
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
269  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgIpmiSerialNewLineSequence (Read/Write)  
Description  
Legal Values  
Specifies the newline sequence specification for the IPMI serial  
interface.  
0 (None)  
1 (CR-LF)  
2 (NULL)  
3 (<CR>)  
4 (<LF-CR>)  
5 (<LF>)  
1
Default  
cfgIpmiSerialInputNewLineSequence (Read/Write)  
Description  
Legal Values  
Specifies the input newline sequence specification for the IPMI  
serial interface.  
1 (CR-LF)  
2 (NULL)  
1
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
270  
iDRAC6 and CMC Property Database Group and Object Descriptions  
   
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgSmartCard  
This group is applicable only for iDRAC6 and specifies properties used to  
support access to iDRAC6 using a smart card.  
The following sections provides information about the objects in the  
cfgSmartCard group.  
cfgSmartCardLogonEnable (Read/Write)  
Description  
Legal Values  
Enables, disables, or enables with Remote RACADM support for  
access to iDRAC6 using a smart card.  
NOTE: Enabling with remote RACADM is only applicable for iDRAC6  
on Rack and Tower Servers.  
0 (Disabled)  
1 (Enabled)  
2 (Enabled with Remote RACADM) - This is not applicable for  
iDRAC6 Enterprise on Blade Servers.  
Default  
0
cfgSmartCardCRLEnable (Read/Write)  
NOTE: This object is applicable only for iDRAC6 on Rack and Tower Servers and  
not for iDRAC6 Enterprise on Blade Servers.  
Description  
Legal Values  
Enables or disables the Certificate Revocation List (CRL).  
1 (TRUE)  
0 (FALSE)  
0
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
271  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgNetTuning  
This group enables users to configure the advanced network interface  
parameters for the RAC NIC or CMC. When configured, the updated  
settings may take up to a minute to become active.  
The following sections provides information about the objects in the  
cfgNetTuning group.  
NOTE: The cfgNetTuning object group is applicable only for iDRAC6 on Rack and  
Tower Servers and not for iDRAC6 Enterprise on Blade Servers.  
CAUTION: Use extra precaution when modifying properties in this group.  
Inappropriate modification of the properties in this group can result in your RAC  
NIC become inoperable.  
cfgNetTuningNicSpeed  
Description  
Specifies the speed for the CMC NIC. This property is used only if  
cfgNetTuningNicAutoNeg is set to 0 (disabled).  
Legal Values  
Default  
10 or 100  
100  
cfgNetTuningNicAutoneg (Read/Write)  
Description  
Enables autonegotiation of physical link speed and duplex. If  
enabled, autonegotiation takes priority over values set in the  
cfgNetTuningNic100MB and cfgNetTuningNicFullDuplex  
objects.  
Legal Values  
1 (TRUE)  
0 (FALSE)  
1
Default  
Example  
racadm getconfig -g cfgNetTuning  
cfgNetTuningNicSpeed=100  
cfgNetTuningNicFullDuplex=1  
cfgNetTuningNicMtu=1500  
cfgNetTuningNicAutoneg=1  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
272  
iDRAC6 and CMC Property Database Group and Object Descriptions  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgNetTuningNic100MB (Read/Write)  
Description  
Legal Values  
Specifies the speed to use for the RAC NIC. This property is not  
used if the cfgNetTuningNicAutoNeg is set to 1 (enabled).  
0 (10 MBit)  
1 (100 MBit)  
1
Default  
cfgNetTuningNicFullDuplex (Read/Write)  
Description  
Specifies the duplex setting for the RAC or CMC NIC. This  
property is used only if the cfgNetTuningNicAutoNeg is set to 0  
(disabled).  
Legal Values  
Default  
0 (Half Duplex)  
1 (Full Duplex)  
1
cfgNetTuningNicMtu (Read/Write)  
Description  
The size in bytes of the maximum transmission unit used by  
iDRAC6 or CMC NIC.  
Legal Values  
Default  
576 – 1500  
1500  
NOTE: IPv6 requires a minimum MTU of 1280. If IPv6 is enabled, and  
cfgNetTuningMtu is set to a lower value, the CMC uses an MTU of 1280.  
cfgSensorRedundancy  
This group is applicable only for iDRAC6 and is used to set the power supply  
redundancy.  
The following sections provides information about the objects in the  
cfgSensorRedundancy group.  
NOTE: The cfgSensorRedundancy object group is applicable only for iDRAC6 on  
Rack and Tower Servers and not for iDRAC6 Enterprise on Blade Servers.  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
273  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgSensorRedundancyIndex (Read Only)  
Description  
Index for the sensor redundancy group being read. Only power  
supply redundancy is supported.  
Legal Values  
Default  
1
None  
cfgSensorRedundancyPolicy (Read/Write)  
Description  
Legal Values  
Sets the power supply redundancy policy.  
2 - N/A, for sytems that are not supported  
3 - Non Redundant  
4 - 1+1 Redundant  
4 - 2+1 Redundant  
16 - 2+2 Redundant  
Default  
Any legal value at that particular execution instance.  
cfgSensorRedundancyCapabilities (Read Only)  
Description  
Returns the redundancy capabilities in the form of a bitmask. This  
bitmask allows the user to know which values can be set for  
cfgSensorRedundancyPolicy.  
Legal Values  
A bit mask. More than 1-bit can be set at a time to indicate  
multiple redundancy support.  
0- N/A, for sytems that are not supported  
1- Non Redundant  
2- 1+1 - Redundant  
4- 2+1 - Redundant  
8- 2+2 - Redundant  
0
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
274  
iDRAC6 and CMC Property Database Group and Object Descriptions  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgSensorRedundancyStatus (Read Only)  
Description  
Legal Values  
Indicates the redundancy status. The status is N/A on platforms  
that does not support the power supply sensor redundancy.  
String:  
• N/A  
• Full  
• Lost  
• Degraded  
None  
Default  
cfgVFlashSD  
This group is applicable only for iDRAC6 and is used to configure the  
properties for the vFlash SD card.  
The following sections provides information about the objects in the  
cfgVFlashSD group.  
cfgVFlashSDEnable (Read/Write)  
Description  
Legal Values  
Enables or disables the vFlash SD card.  
0 (vFlash is disabled)  
1 (vFlash is enabled)  
1
Default  
cfgVFlashSDSize (Read Only)  
Description  
Legal Values  
Default  
Displays the size of the vFlash SD card in megabytes (MB).  
A string of upto 64 characters.  
<card size>  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
275  
         
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgVFlashSDLicensed (Read Only)  
Description  
Displays whether a SD card or vFlash SD card is inserted. The  
vFlash SD card supports the new enhanced vFlash features and the  
SD card supports only the limited vFlash features.  
Legal Values  
Default  
0 (SD card is inserted)  
1 (vFlash SD card is inserted)  
None  
cfgVFlashSDAvailableSize (Read Only)  
Description  
Displays the available space (in MB) on the vFlash SD card that can  
be used to create new partitions.  
Legal Values  
Default  
A string of up to 64 characters.  
If the card is not initialized, default is 0. If initialized, displays the  
unused space on the card.  
cfgVFlashSDHealth (Read Only)  
Description  
Legal Values  
Displays the current health status of the vFlash SD card.  
String:  
• OK  
Warning  
• Critical  
• Unknown  
OK  
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
276  
iDRAC6 and CMC Property Database Group and Object Descriptions  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgVFlashSDWriteProtect (Read Only)  
Description  
Legal Values  
Displays whether the physical write-protect latch on the vFlash SD  
card is enabled or disabled.  
0 (vFlash is not write-protected)  
1 (vFlash is write-protected)  
None  
Default  
cfgVFlashPartition  
This group is applicable only for iDRAC6 and is used to configure properties  
for individual partitions on the vFlash SD Card. Up to 16 partitions are  
supported, indexed from 1 to 16.  
NOTE: For SD cards, the index value is limited to 1 because only a single partition  
of size 256 MB is allowed.  
The following sections provides information about the objects in the  
cfgVFlashPartition group.  
cfgVFlashPartitionIndex (ReadOnly)  
Description  
Legal Values  
Default  
Displays the size of the partition.  
Integer from 1-16  
None  
cfgVFlashPartitionSize (ReadOnly)  
Description  
Legal Values  
Default  
The index value of the partition.  
1MB to 4 GB  
None  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
277  
         
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgVFlashPartitionEmulationType (ReadWrite)  
Description  
Legal Values  
Displays the emulation type for the partition.  
String:  
• HDD  
• Floppy  
• CDROM  
None  
Default  
cfgVFlashPartitionOSVolLabel (ReadOnly)  
Description  
Displays the label for the partition that is visible to the operating  
system.  
Legal Values  
Default  
An alphanumeric string of up to six characters.  
None  
cfgVFlashPartitionFormatType (ReadOnly)  
Description  
Legal Values  
Displays the format type of the partition.  
String:  
• FAT16  
• FAT32  
• EXT2  
• EXT3  
• CD  
• RAW  
None  
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
278  
iDRAC6 and CMC Property Database Group and Object Descriptions  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgVFlashPartitionAccessType (Read/Write)  
Description  
Legal Values  
Indicates the partition access permissions. It configures the access  
type to read-write.  
0(Read-only)  
1(Read-write)  
0
Default  
cfgVFlashPartitionAttachState (Read/Write)  
Description  
Legal Values  
Displays whether the partition is attached or detached.  
1 (Attached)  
0 (Detached)  
0
Default  
cfgLogging  
This group is applicable only for iDRAC6 and contains parameters to enable  
or disable the OEM event log filtering.  
The following section provides information about the objects in the  
cfgLogging group:  
cfgLoggingSELOEMEventFilterEnable (Read/Write)  
Description  
Legal Values  
Enables or disables the SEL Log filtering.  
0 (SEL Log filtering is Disabled)  
1 (SEL Log filtering is Enabled)  
0
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
279  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgKMSProfile  
NOTE: This current release does not support this group.  
This group is applicable only for iDRAC6 and is an indexed group which  
currently only supports two indices, since iDRAC only communicates with  
any one of the two KMSs using their specific profile information.  
NOTE: This group is also configurable using the -f option and follows the read only  
value of cfgKMSProfileIndex as the anchor value for the indexed group.  
The following section provides information about the objects in the  
cfgKMSProfile group:  
cfgKMSProfileIndex(Read only)  
Description  
Legal Values  
Index of the profile  
1
2
Default  
None  
cfgKMSProfileIPAddress(Read/Write)  
Description  
Legal Values  
Default  
IP address/FQDN of the KMS  
IPv4, IPv6, FQDN  
0.0.0.0  
cfgKMSProfilePortNumber(Read/Write)  
Description  
Port number indicates the port on which the Key management  
server is listening to. For KMC to communicate to the KMS, one  
needs to configure the same port number as on the KMS.  
Legal Values  
Default  
1 to 65535  
443  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
280  
iDRAC6 and CMC Property Database Group and Object Descriptions  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgKMSProfileTimeout(Read/Write)  
Description  
The timeout value indicates the keep-alive time for the KMC-KMS  
connection.  
Legal Values  
Default  
15 to 600 seconds  
300 seconds  
cfgKMSProfileDeviceGroup(Read/Write)  
Description  
Device group indicates the group on the KMS to which the device  
will belong to. The Device group on the KMS is a configurable  
string, which must be provided to the KMC for it to retrieve the  
keys.  
Legal Values  
Default  
AlphaNumeric character values with only underscore as special  
character.  
Poweredge  
cfgRacSecurity  
NOTE: Use this object with the config or getconfig subcommands.  
NOTE: To use this object property, you must have Chassis Configuration  
Administrator privilege. This object property is specific to CMC only.  
NOTE: For iDRAC6 this group is replaced with cfgRacSecrityData.  
This group is used to configure settings related to CMC SSL certificate  
signing request (CSR) feature. The properties in this group must be  
configured before generating a CSR from CMC.  
For more information on generating certificate signing requests, see the  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
281  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
The following sections provides information about the objects in the  
cfgRacSecurity group.  
cfgRacSecCsrCommonName (Read/Write)  
Description  
Specifies the CSR Common Name (CN) that must be an IP or  
CMC name as given in the certificate.  
Legal Values  
Default  
A string of up to 254 characters.  
<blank>  
cfgRacSecCsrOrganizationName (Read/Write)  
Description  
Legal Values  
Default  
Specifies the CSR Organization Name (O).  
A string of up to 254 characters.  
<blank>  
cfgRacSecCsrOrganizationUnit (Read/Write)  
Description  
Legal Values  
Default  
Specifies the CSR Organization Unit (OU).  
A string of up to 254 characters.  
<blank>  
cfgRacSecCsrLocalityName (Read/Write)  
Description  
Legal Values  
Default  
Specifies the CSR Loyalty (L).  
A string of up to 254 characters.  
<blank>  
cfgRacSecCsrStateName (Read/Write)  
Description  
Legal Values  
Default  
Specifies the CSR State Name (S).  
A string of up to 254 characters.  
<blank>  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
282  
iDRAC6 and CMC Property Database Group and Object Descriptions  
         
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgRacSecCsrCountryCode (Read/Write)  
Description  
Legal Values  
Default  
Specifies the CSR Country Code (CC).  
A string of up to 2 characters.  
<blank>  
cfgRacSecCsrEmailAddr (Read/Write)  
Description  
Legal Values  
Default  
Specifies the CSR email address.  
A string of up to 254 characters.  
<blank>  
Example  
racadm config -g cfgRacSecurity  
cfgRacSecCsrKeySize=1024  
cfgRacSecCommonName=  
cfgRacSecOrganizationName=  
cfgRacSecOrganizationUnit=  
cfgRacSecLocalityName=  
cfgRacSecStateName=  
cfgRacSecCountryCode=  
cfgRacSecEmailAddr=  
cfgRacSecCsrKeySize (Read/Write)  
Description  
Legal Values  
Default  
Specifies the SSL asymmetric key size for the CSRs.  
512, 1024, 2048  
1024  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
283  
     
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgRacSecurityData  
NOTE: This object property is specific to iDRAC6 only.  
This group is used to configure settings related to iDRAC6 SSL certificate  
signing request (CSR) feature and KMC certificate signing request feature.  
The properties in this group must be configured before generating a CSR  
from iDRAC6. This is an indexed group which currently only supports two  
indices.  
NOTE: This second index is not supported for this release.  
For more information on generating certificate signing requests, see the  
The following sections provides information about the objects in the  
cfgRacSecurityData group:  
cfgRacSecCsrIndex  
Description  
Legal Values  
Specifies the CSR index  
1 = Server certificate  
2 = KMS certificate  
<blank>  
Default  
cfgRacSecCsrKeySize  
Description  
Legal Values  
Default  
Specifies the keysize of the CSR  
1024, 2048  
1024  
cfgRacSecCsrCommonName (Read/Write)  
Description  
Specifies the CSR Common Name (CN) that must be an IP or  
iDRAC or CMC name as given in the certificate.  
A string of up to 254 characters.  
<blank>  
Legal Values  
Default  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
284  
iDRAC6 and CMC Property Database Group and Object Descriptions  
       
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgRacSecCsrOrganizationName (Read/Write)  
Description  
Legal Values  
Default  
Specifies the CSR Organization Name (O).  
A string of up to 254 characters.  
<blank>  
cfgRacSecCsrOrganizationUnit (Read/Write)  
Description  
Legal Values  
Default  
Specifies the CSR Organization Unit (OU).  
A string of up to 254 characters.  
<blank>  
cfgRacSecCsrLocalityName (Read/Write)  
Description  
Legal Values  
Default  
Specifies the CSR Loyalty (L).  
A string of up to 254 characters.  
<blank>  
cfgRacSecCsrStateName  
Description  
Legal Values  
Default  
Specifies the CSR State Name (S).  
A string of up to 254 characters.  
<blank>  
cfgRacSecCsrCountryCode  
Description  
Legal Values  
Default  
Specifies the CSR Country Code (CC).  
A string of up to 254 characters.  
US  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
285  
         
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
cfgRacSecCsrEmailAddr  
Description  
Legal Values  
Default  
Specifies the CSR email address.  
A string of up to 254 characters.  
<blank>  
Example  
racadm getconfig -g cfgRacSecurityData -i 1  
#cfgRacSecCsrIndex=1  
cfgRacSecCsrKeySize=1024  
cfgRacSecCsrCommonName=iDRAC_10.35.1105.10  
cfgRacSecCsrOrganizationName=OrgName  
cfgRacSecCsrOrganizationUnit=OrgUnit  
cfgRacSecCsrLocalityName=LocalityName  
cfgRacSecCsrStateName=TX  
cfgRacSecCsrCountryCode=US  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
286  
iDRAC6 and CMC Property Database Group and Object Descriptions  
 
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
iDRAC6 and CMC Property Database Group and Object Descriptions  
287  
FILE LOCATION:  
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac  
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY  
288  
iDRAC6 and CMC Property Database Group and Object Descriptions  
4
Deprecated Commands, Groups,  
and Objects  
This section provides information about the deprecated RACADM  
subcommands, groups, and objects in the current release. Few commands,  
groups, or objects are deprecated in RACADM either due to a new command  
or object replacing the functionality of an existing command or object, or the  
feature is no longer supported.  
For the deprecated command or object:  
If you run the racadm helpcommand, the deprecated command is not  
displayed in the command list.  
If you run the racadm help <deprecated command name>, then  
the following information is displayed:  
ATTENTION: <command name> is a deprecated command!  
While execution of this command will still be  
successful we strongly encourage you to use the  
new functionality.  
The functionality of this command is now covered  
by <list of new functionality>.  
Type “racadm help <new command name>” to learn  
more.  
NOTE: This information is displayed only for iDRAC6 on Rack and Tower servers  
and is not displayed for iDRAC6 Enterprise on Blade servers.  
If you run a deprecated command, it works if the feature is supported. If  
the feature is not supported, an error is not returned.  
If you run the racadm getconfig –hcommand, the deprecated  
group is not displayed in the results.  
Deprecated Commands, Groups, and Objects  
289  
   
If you query a deprecated group or object, then the values are returned.  
If you try to configure a deprecated group or object, the configuration  
succeeds.  
If you request a group that contains a deprecated object, the deprecated  
object is not displayed in the results.  
Table 4-1 lists the RACADM subcommands deprecated in the current release.  
Table 4-1. RACADM Deprecated Subcommands  
Subcommand  
Replaced With  
vmkey reset  
vflashsd initialize  
-
testkmsconnectivity  
Table 4-2 lists the RACADM groups and objects deprecated in the current  
release.  
Table 4-2. RACADM Deprecated Groups and Objects  
Group/Object  
Replaced With  
cfgVirMediaKeyEnable  
cfgSDWriteProtect  
290  
Deprecated Commands, Groups, and Objects  
   

Motorola KRZR User Manual
Magnavox AJ384017 User Manual
Magnat Audio MC 1 User Manual
JVC LYT1085 001A User Manual
HP Hewlett Packard DESKJET 712C User Manual
Grindmaster SHUTTLE BREWER APBIC 330V2E230 User Manual
Fujitsu Computer Drive MHU2100AT User Manual
Fujitsu Computer Drive MBC2073RC User Manual
Bunn Coffeemaker F 35 User Manual
Asus Computer Accessories A7V8X LA User Manual