DeLonghi Coffeemaker ESAM6700 User Manual

De’Longhi America, Inc.  
Park 80 West, Plaza One  
Saddle Brook, NJ 07663  
1-866-528-8323 (1-866-Latte-Best)  
De’Longhi Canada, Inc.  
6150 McLaughlin Road  
Mississauga, Ontario  
L5R 4E1 Canada  
1-888-335-6644  
Fiducia Italiana S.A de C.V.  
Pestalozzi 814  
Col. Del Valle  
Del. Benito Juarez  
México D.F. 03100  
tels: 5543 1447 y 5543 6492  
Lada sin costo: 01800 711 8805  
5713212301/07.09  
2
A
B
A4 A5  
A3  
B1  
B3  
A6  
B6  
A2  
A1  
A7  
A8  
A9  
B5  
B4  
A22  
B2  
A10  
A21  
A20  
A19  
A11  
A12  
A23  
A24  
A13  
A14  
A15  
A18  
A17  
A16  
C
C15  
C16  
C1  
C2  
C3  
Ready  
espresso  
C14  
C13  
C12  
C4  
C5  
C6  
C11  
C10  
C9  
C8  
C7  
3
1
2
3
7
5
6
4
8
9
10  
11  
15  
13  
14  
12  
4
normal coffee  
16  
17  
18  
19  
M
A
X
20  
21  
22  
23  
27  
24  
25  
26  
29  
30  
31  
28  
5
33  
34  
32  
35  
36  
38  
39  
37  
40  
41  
hot WAtEr.....................................17  
Preparation ....................................................17  
Changing the quantity....................................17  
InDEx  
ImportAnt SAFEGuArDS.................... 8  
Short CorD InStruCtIonS ................ 8  
CLEAnInG.......................................17  
Cleaning the coffee maker..............................17  
Cleaning the coffee grounds container...........17  
Cleaning the drip tray.....................................18  
Cleaning the water tank..................................18  
Cleaning the coffee nozzles............................18  
Cleaning the pre-ground coffee feed funnel ...18  
Cleaning the inside of the machine ................18  
Cleaning the brew group................................18  
Cleaning the milk container............................19  
IntroDuCtIon ................................. 9  
Symbols used in these instructions.................9  
Letters in brackets ...........................................9  
Troubleshooting and repairs ............................9  
DESCrIptIon.................................... 9  
Description of appliance ..................................9  
Description of milk container...........................9  
Description of control panel (touch screen).....9  
DESCALInG .....................................19  
prELImInAry ChECKS .......................10  
Controls after transport..................................10  
Installing the appliance ..................................10  
Connecting the appliance...............................10  
Setting up the appliance.................................11  
SEttInG WAtEr hArDnESS.................20  
Measuring water hardness.............................20  
Setting water hardness ..................................20  
uSInG CompArtmEnt For LAttE GLASS 20  
DISpLAyED mESSAGES.......................21  
trouBLEShootInG...........................22  
LImItED WArrAnty..........................24  
turnInG thE AppLIAnCE on ...............11  
turnInG thE AppLIAnCE oFF .............11  
ChAnGInG thE mEnu SEttInGS ...........12  
Setting the language .....................................12  
Setting the clock ............................................12  
Setting auto-start time...................................12  
Setting the temperature .................................12  
Setting auto-off..............................................12  
Resetting default values (reset) .....................13  
Statistics function..........................................13  
Acoustic signal (Beep enabled)......................13  
mAKInG CoFFEE ..............................13  
Selecting the coffee taste...............................13  
Selecting the quantity of coffee in the cup .....13  
ESPRESSO (oz) .............................................13  
LONG COFFEE (oz).........................................13  
Programming the espresso “my coffee”  
quantity..........................................................13  
Programming the long “my coffee” quantity..14  
Regulating the coffee mill ..............................14  
Making espresso coffee using coffee beans...14  
Making long coffee using coffee beans..........14  
Making espresso or long coffee using  
pre-ground coffee..........................................15  
mAKInG DrInKS WIth mILK ................15  
Filling and attaching the milk container..........15  
Making latte ..................................................15  
Making cappuccino........................................16  
Making Italian macchiato...............................16  
Making hot milk.............................................16  
Cleaning the milk container after use.............16  
Programming the size for each beverage  
button ............................................................16  
7
I m p o r t A n t S A F E G u A r D S  
When using electrical appliances, basic safety precautions should always be followed, inclu-  
ding the following.  
Read all instructions carefully.  
Make sure the voltage of your electrical system corresponds to the voltage shown on the  
bottom of the machine.  
Do not touch hot surfaces. Use handles or knobs.  
To protect against fire, electrical shock and personal injury, do not immerse cord, plug or  
appliance in water or other liquid.  
Keep the appliance out of the reach of children and do not leave appliance unattended  
while in operation.  
Unplug from the outlet when not in use and before cleaning.  
Do not operate with a damaged cord or plug, or after the appliance malfunctions, or has  
been damaged in any manner. Return the appliance to the nearest authorized service  
facility for examination, repair or adjustment.  
The use of accessory attachments not recommended by the manufacturer may result in  
fire, electrical shock, or personal injury.  
Do not use outdoors.  
Make sure the power cord does not hang over the edge of the table or counter-top to avoid  
getting accidentally caught or entangled.  
Do not place the appliance or its electrical parts on or near electric stoves, cooking surfa-  
ces, or gas burners.  
Plug cord into the wall outlet. To disconnect, first turn machine “off”, then remove plug  
from wall outlet.  
Do not use the appliance for other than the intended use. This appliance is to be utilized  
for domestic use only. The manufacturer declines all responsibility for any damage caused  
by improper, incorrect, or irresponsible use.  
WArnInG: to reduce the risk of fire or electric shock, do not remove the cover or the exterior of the  
unit. Don’t attempt to repair or modify the machine, doing so will void the warranty. repair should  
be done by authorized service personnel only!  
SAVE thESE InStruCtIonS  
THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY  
Short CorD InStruCtIonS  
A short power cord is provided to reduce risks resulting from becoming entangled in or tripping  
over a longer cord.  
Longer, detachable power supply cords or extension cords are available and may be used if care is  
exercised in their use.  
If an extension cord is used, the marked electrical rating should be at least as great as the electrical  
rating of the appliance. If the appliance is provided with 3- wire, grounding type cord, the extension  
should be a GROUNDING TYPE 3 - WIRE CORD. The longer cord should be arranged so that it will  
not drape over the counter-top or table top where it can be pulled on by children or tripped over.  
Your product is equipped with a polarized alternating current line plug (a plug having one blade  
wider than the other). This plug will fit into the power outlet only one way. This is a safety feature.  
If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still  
fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose  
of the polarized plug.  
-
-
-
8
IntroDuCtIon  
DESCrIptIon  
Description of appliance  
(page 3 - A )  
A1. Grinding coarseness regulator knob  
A2. Container for coffee beans  
A3. Main switch (some models only)  
A4. Bean container lid  
ThankyouforchoosingtheESAM6700automatic  
coffee and cappuccino maker.  
We hope you enjoy using your new appliance.  
Take a few minutes to read these instructions.  
This will avoid all risks and damage to the  
machine.  
A5. Cover for pre-ground coffee funnel  
A6. Measuring scoop compartment  
A7. Cup warmer shelf  
A8. Ground coffee funnel  
A9. Display  
Symbols used in these instructions  
Important warnings are identified by these  
symbols.  
These warnings must absolutely be respected.  
A10. Touch screen (control panel)  
A11. Hot water and steam nozzle  
A12. Brew group  
A13. Water tank  
A14. Power cable  
Danger!  
Failure to observe the warning could result in  
possibly life threatening injury from electric  
shock.  
A15. Cup tray  
A16. Drip tray  
A17. Compartment for latte glass  
A18. Grounds tray  
Important!  
Failure to observe the warning could result in  
injury or damage to the appliance.  
A19. Service door  
Danger Of burns!  
A20. Coffee spout (adjustable height)  
A21. Coffee guide  
A22. ON/STAND-BY button  
A23. Hot water spout  
Failure to observe the warning could result in  
scalds or burns.  
Information :  
This symbol identifies important advice or  
information for the user. .  
A24. Coffee scoop  
Description of milk container  
(page 3 - B )  
B1. Milk frother selector  
B2. Milk container handle  
B3. CLEAN button  
B4. Milk intake tube  
B5. Frothed milk spout  
B6. Lid for milk frother  
Letters in brackets  
The letters in brackets refer to the legend in the  
description of the appliance on page 3.  
troubleshooting and repairs  
In the event of problems, first try and resolve  
them following the information given in the  
sections “Displayed messages” on page 21 and  
“Troubleshooting” on page 23.  
Description of control panel (touch screen)  
If this does not resolve the problem or you  
require further information, you should consult  
Customer Service by calling the number given on  
the “Customer Service” sheet.  
If your country is not among those listed on the  
sheet, call the number given in the guarantee.  
If repairs are required, contact De’Longhi  
customer services only.  
(page 3 - C )  
Information: Only the icons relating to  
the controls enabled for the particular function  
currently being used will be lit on the touch  
screen.  
C1. Display: guides the user in using the  
appliance.  
C2. : icon: to scroll forwards through the  
programming menu.  
The addresses are given in the warranty  
certificate provided with the machine.  
C3.  
icon: to deliver one cup of espresso  
coffee.  
icon: to deliver one cup of espresso  
C4.  
9
coffee.  
prELImInAry ChECKS  
Controls after transport  
After removing the packaging, make sure the  
product is complete and undamaged and that all  
accessories are present.  
Do not use the appliance if it is visibly damaged.  
Contact Customer Service.  
C5. oK icon: to enable and confirm the selected  
function.  
C6.  
icon: to rinse or deliver hot water.  
C7. hot mILK icon: to deliver a cup of steamed  
milk.  
C8. ItALIAn mACChIAto icon: to deliver a  
shot of espresso with a small amount of  
foam on top.  
Installing the appliance  
C9. LonG  
icon: to deliver one cup of  
C10. CAppuCCIno icon: to deliver  
cappuccino.  
C11. LAttE icon: to deliver a latte.  
a
Important!  
When you install the appliance, you should follow  
the safety warnings below:  
C12. p icon: to access the programming menu.  
C13. ESC icon: to exit the selected function in  
the menu.  
The appliance gives off heat. After positioning  
the appliance on the work top, leave a space  
of at least 1 in (3 cm) between the appliance  
and the side and rear walls and at least 6 in  
(15 cm) above the coffee maker.  
Water penetrating the appliance could cause  
damage. Do not place the appliance near  
taps or sinks.  
The appliance could be damaged if the  
water it contains freezes. Do not install the  
appliance in a room where the temperature  
could drop below freezing point.  
C14.  
C15.  
C16.  
icon: to select the coffee’s strength.  
icon: to select the coffee size.  
icon: to scroll backwards through the  
programming menu.  
Information : A light touch is enough to  
activate the icon.  
Arrange the power cable in such a way that  
it cannot be damaged by sharp edges or  
contact with hot surfaces (e.g. electric hot  
plates).  
Connecting the appliance  
Important! Check that the power outlet  
supply voltage corresponds to the value  
indicated on the rating plate on the bottom of the  
appliance.  
Connect the appliance to an efficiently earthed  
and correctly installed outlet with a minimum  
current rating of 12A only. If the power outlet  
does not match the plug on the appliance, have  
the outlet replaced with a suitable type by a  
qualified professional.  
10  
Setting up the appliance  
turnInG thE AppLIAnCE on  
Information :  
Information: In models provided with main  
switch, before turning the appliance on, make  
sure the main switch on the back of the appliance  
is in the I position (fig. 1).  
Coffee has been used to factory test the  
appliance and it is therefore completely  
normal for there to be traces of coffee in the  
mill.  
The machine is, however, guaranteed to be  
new.  
You should customize water hardness as  
soon as possible following the instructions  
in the section “Setting water hardness” on  
page 20.  
Each time the appliance is turned on, it performs  
an automatic preheat and rinse cycle which  
cannot be interrupted.  
The appliance is ready for use only after  
completion of this cycle.  
Danger of burns! During rinsing, a little  
hot water comes out of the coffee spouts and is  
collected in the drip tray underneath.  
1. Plug the appliance into the power outlet and  
(in models provided with main switch) place  
the main switch on the back of the appliance  
in the I position (fig. 1).  
Avoid contact with splashes of water.  
You must first select the language (the  
languages scroll through at intervals of about  
two seconds):  
2. When English appears, press the oK icon for  
3 seconds (fig. 2). Once the language has  
been saved, the message “English installed”  
is displayed.  
Follow the instructions indicated by the  
appliance:  
3. “FILL TANK!”: remove the water tank, fill to  
the MAX line with fresh water then replace in  
the appliance (fig. 3).  
To turn the appliance on, press the button on  
the left side of the machine (fig. 5): the  
message “Heating up... please wait” is dis  
When heating is complete, the message changes  
to: “Rinsing”. As well as heating the boiler, this  
also heats the internal circuits by circulating hot  
water.  
The appliance is at temperature when the  
message “STANDARD COFFEE standard taste”  
is displayed.  
4. “INSERT WATER SPOUT AND PRESS OK”:  
Check that the hot water spout is inserted on  
the nozzle and place a container underneath  
(fig. 4).  
turnInG thE AppLIAnCE oFF  
Each time the appliance is turned off, it performs  
an automatic rinse cycle which cannot be  
interrupted.  
Press the oK icon (fig. 2). “PLEASE WAIT...” is  
displayed and the appliance begins to deliver  
hot water.  
Danger of burns! During rinsing, a little hot  
water flows from the coffee spouts.  
Avoid contact with splashes of water.  
The appliance ends the first start up procedure,  
then the message “Turning off, please wait...” is  
displayed and the appliance goes off.  
The coffee maker is now ready for normal use.  
To turn the appliance off, press the  
button  
(fig. 5). The appliance performs the rinse cycle  
then goes off.  
Information: In models provided with  
main switch, if the appliance is not used for an  
extended period, place the main switch on the  
back of the appliance in the 0 position (fig. 6).  
Information: When using the appliance  
for the first time, you need to make 4-5 cups of  
coffee and 4-5 cappuccinos before the appliance  
starts to give satisfactory results.  
11  
5. Press the oK icon to confirm: the minutes  
ChAnGInG thE mEnu SEttInGS  
flash on the display;  
Setting the language  
To modify the language on the display, proceed  
as follows:  
6. Press the  
minutes;  
or  
icon to change the  
7. Press the OK icon to confirm: “Auto-start  
Enabled?” is displayed;  
8. Press the ESC icon to exit the menu: a symbol  
appears next to the clock to indicate that  
auto-start has been programmed.  
To deactivate the function:  
1. Press the p icon to enter the programming  
menu;  
2. Press the or  
is displayed;  
icon until “Set language”  
3. Press the oK icon;  
4. Press the  
or  
icon until the required  
1. Press the p icon to enter the programming  
menu;  
language is displayed;  
5. Press the oK icon to confirm (or the ESC  
icon to cancel the operation);  
6. Press the ESC icon to exit the menu.  
2. Press the  
or  
icon until “Auto-start  
Enabled?” is displayed;  
3. Press the oK icon: the hours flash on the  
display;  
Setting the clock  
To adjust the time on the display, proceed as  
follows:  
4. Press the ESC icon. This deactivates the  
function and the  
the display.  
5. Press the ESC icon to exit the menu.  
symbol disappears from  
1. Press the p icon to enter the programming  
menu;  
Information : To activate this function, the  
time must have been set previously.  
2. Press the  
or  
icon until “Adjust time” is  
displayed;  
3. Press the oK icon: the hours flash on the  
Setting the temperature  
display;  
To modify the temperature (low, medium, high)  
of the water used to make the coffee, proceed  
as follows:  
4. Press the  
or  
icon to change the  
hours;  
5. Press the oK icon to confirm (or the ESC  
icon to cancel the operation): the minutes  
flash on the display;  
1. Press the p icon to enter the menu;  
2. Press the  
is displayed;  
or  
icon until “Temperature”  
6. Press the  
or  
icon to change the  
minutes;  
3. Press the oK icon;  
4. Press the or  
temperature (low, medium or high) is  
displayed;  
5. Press the oK icon to confirm (or the ESC  
icon to cancel the operation);  
7. Press the oK icon to confirm (or the ESC  
icon to cancel the operation);  
8. Press the ESC icon to exit the programming  
menu.  
icon until the required  
Setting auto-start time  
6. Press the ESC icon to exit the menu.  
You can set the auto-start time in order to  
have the appliance ready at a certain time (for  
example in the morning) so you can make coffee  
immediately.  
1. Press the p icon to enter the programming  
menu;  
Setting auto-off  
Information: The appliance is set to switch  
automatically to stand-by if not used for 30  
minutes. The time can be changed so that the  
appliance switches off after 1 or 2 hours.  
2. Press the  
or  
icon until “Auto-start  
disabled” is displayed; “Enable?” is displayed  
and the hours flash on the display;  
3. Press the oK icon: the hours flash on the  
display;  
1. Press the p icon to enter the menu;  
2. Press the  
displayed;  
or  
icon until “Auto-off” is  
icon until the required  
3. Press the oK icon;  
4. Press the or  
4. Press the  
hours;  
or  
icon to change the  
12  
number of hours of operation (30 minutes, 1  
or 2 hours) is displayed;  
5. Press the oK icon to confirm (or the ESC  
icon to cancel the operation);  
mAKInG CoFFEE  
Selecting the coffee taste  
The appliance is preset to make coffee with a  
standard taste.  
6. Press the ESC icon to exit the menu.  
You can choose between 5 different coffee  
tastes:  
resetting default values (reset)  
This resets all menu settings and programmed  
quantities back to the default values (with the  
exception of the language, time and beep which  
remains as set as well as the counter for the  
statistics function).  
Extra-mild taste  
Mild taste  
Standard taste  
Strong taste  
1. Press the p icon to enter the menu;  
Extra-strong taste  
2. Press the or  
is displayed;  
icon until “Default values”  
To change the flavor, press the  
icon  
3. Press the oK icon;  
(fig. 7) repeatedly until the required taste is  
displayed.  
4. The message “Confirm?” is displayed.  
5. Press the oK icon to confirm and exit (or the  
ESC icon to cancel the operation).  
Selecting the quantity of coffee in the cup  
To select the quantity of coffee, press the  
icon repeatedly (fig. 8) until the required quantity  
of coffee is displayed. The quantities delivered  
are different according to the type of coffee  
selected:  
Statistics function  
This displays statistics relating to the machine.  
To display, proceed as follows:  
1. Press the p icon to enter the menu;  
2. Press the  
displayed;  
or  
icon until “Statistics” is  
ESprESSo  
LonG  
3. Press the oK icon;  
4. By pressing the or icon, you can check:  
(oz)  
CoFFEE (oz)  
MY COFFEE  
max: 6  
max: 8.5  
-
-
-
how many coffees have been made;  
how many drinks with milk have been made;  
how many times the machine has been  
descaled;  
SHORT  
COFFEE  
1.4  
4.2  
STANDARD  
COFFEE  
2  
6  
-
the total number of liters of water delivered;  
5. Press the ESC icon twice to exit the menu.  
LONG COFFEE  
3  
4  
7  
8.5  
Acoustic signal (Beep enabled)  
EXTRA LONG  
COFFEE  
This activates or deactivates the beep emitted  
by the machine each time an icon is pressed or  
an accessory is inserted/removed. The beep is  
enabled by default.  
1. Press the p icon to enter the menu;  
2. Press the or icon until “Beep enabled” is  
displayed;  
3. Press the oK icon to confirm, “Confirm?” is  
displayed;  
4. Press the oK icon again to confirm activation  
or the ESC icon to deactivate the function;  
5. Press the ESC icon to exit the menu.  
programming the espresso “my coffee”  
quantity  
The appliance is set by default to automatically  
deliver 1 oz of espresso coffee.  
To modify this quantity, proceed as follows:  
1. Press the  
“MY COFFEE” is displayed.  
2. Press and hold the one cup  
icon repeatedly (fig. 8) until  
icon (fig. 9)  
for about 8 seconds until “Program quantity”  
is displayed, then release. The machine  
starts delivering the coffee and the  
flashes;  
Information : The descale and water hard-  
ness functions will be explained later in the  
manual.  
icon  
3. As soon as the coffee in the cup reaches the  
13  
making espresso coffee using coffee beans  
required level, press the  
icon again.  
The quantity set has now been programmed.  
Important! Do not use caramelized or  
candied coffee beans as they could stick to the  
coffee mill and make it unusable.  
Information: This setting is valid for mak-  
ing both one and two cups. You cannot program  
a quantity for two cups. To obtain 2 quantities of  
1. Fill the container with coffee beans (fig. 12).  
2. Place under the coffee spouts:  
- one cup, if you want one coffee (fig. 13);  
- two cups, if you want two coffees (fig. 14);  
3. Lower the spouts as near as possible to the  
cup. This makes a creamier coffee (fig. 15).  
4. Choose the strength by hitting the  
“my coffee press the  
button.  
programming the long “my coffee” quantity  
The appliance is set by default to automatically  
deliver 3.4 oz of LONG coffee. To modify this  
quantity, proceed as follows:  
1. Press the  
icon repeatedly (fig. 8) until  
“MY COFFEE” is displayed.  
2. Press the LonG  
and size by hitting the  
.
icon (fig. 10) until “Pro-  
5. Press the icon corresponding to the number  
gram quantity” is displayed, then release.  
The machine starts delivering the coffee and  
the LonG icon flashes;  
of coffees required (one cup  
or two cups  
) (fig. 9 and 16).  
6. Preparation begins. A progress bar appears  
on the display and gradually advances as the  
procedure progresses (fig. 17).  
Once the coffee has been made, the appliance is  
ready to use again.  
3. As soon as the coffee in the cup reaches the  
required level, press the LonG icon again.  
The quantity set has now been programmed.  
regulating the coffee mill  
The coffee mill is preset in the factory to prepare  
coffee correctly and should not require regulating  
initially.  
However, if after making the first few coffees  
you find that delivery is either too fast or too  
slow (a drop at a time), this can be corrected  
by regulating the grinding adjustment knob (fig.  
11).  
Information:  
While the machine is making coffee, delivery  
can be interrupted at any moment by pressing  
the lit cup icon.  
For a hotter coffee, before delivery rinse the  
appliance through by pressing the  
and confirming with the OK icon. Hot water  
flows out of the coffee spouts and heats the  
internal circuit of the machine so that the  
coffee delivered will be hotter.  
For an even hotter coffee, heat the cups by  
rinsing them with the hot water.  
If the coffee is delivered in drops, too fast  
and not creamy enough or too cold, read the  
tips in the “Troubleshooting” section on page  
22.  
icon  
Important! The grinding coarseness  
regulator must only be turned when the coffee  
mill is in operation (when you hear the grinder  
in motion).  
For slower coffee delivery  
and a creamier coffee, turn  
one click towards “1” (finer  
ground coffee).  
making long coffee using coffee beans  
For more rapid coffee deliv-  
ery (not in drops), turn one  
click towards “7” (coarser  
ground coffee).  
Information:  
activated, a long coffee similar to drip coffee is  
obtained.  
When this function is  
Important! Do not use caramelized or  
candied coffee beans as they could stick to the  
coffee mill and make it unusable.  
Information: These adjustments will only  
be evident after at least two cups of coffee have  
been made.  
1. Fill the container with coffee beans (fig. 12).  
2. Adjust the height of the spout according to  
14  
the cup used. Put the cup for long coffee  
under the spouts (fig. 18);  
3. Choose the strength by hitting the  
mAKInG DrInKS WIth mILK  
Filling and attaching the milk container  
1. Turn the lid of the milk container clockwise  
until it becomes noticeably difficult to turn,  
then remove the lid (fig. 20).  
2. Fill the milk container with a sufficient  
quantity of milk, not exceeding the MAX level  
marked on the handle (fig. 21).  
and size by hitting the  
.
4. Press the LonG icon (fig. 10). Preparation  
begins. A progress bar appears on the display  
and gradually advances as the procedure  
progresses.  
Information:  
Information! We recommend using skim  
or 2% milk at refrigerator temperature (about  
41°F). To avoid milk with poor froth or large  
bubbles, always clean the milk lid and hot water  
nozzle as described in the section “Cleaning the  
milk container” on page 19.  
While the machine is making coffee, delivery  
can be interrupted at any moment by pressing  
the LonG icon.  
Only one cup of long coffee can be made at a  
time.  
When delivering more than 4.2 oz, the  
appliance automatically grinds more coffee  
halfway through delivery.  
3. Make sure the milk intake tube is correctly  
inserted in the bottom of the milk container  
lid (fig. 22).  
4. Replace the milk container lid and turn  
counterclockwise as far as it will go until you  
hear it click.  
making espresso or long coffee using pre-  
ground coffee  
Important!  
Never add pre-ground coffee when the  
machine is off or it could spread through the  
inside of the machine and dirty it.  
Never use more than one level measuring  
scoop or it could dirty the inside of the  
machine or block the funnel.  
5. Remove the hot water spout from the nozzle  
(fig. 23).  
6. Attach the container to the nozzle and push as  
far as it will go (fig. 24). The machine emits  
a beep when milk container is attached  
correctly (if the beep function is enabled).  
7. Place a sufficiently large cup under the coffee  
spouts and frothed milk spout.  
Information: If you use pre-ground coffee,  
you can only make one cup of coffee at a time.  
To use particularly tall cups/glasses, raise  
the lid (A17) of the special compartment in  
the cup tray (fig. 25).  
1. Press the icon repeatedly (fig. 7)  
until “Pre-ground” flashes on the display.  
2. Put one level measuring scoop of pre-ground  
coffee into the funnel (fig. 19).  
3. Place a cup under the coffee spouts.  
4. To make espresso coffee, press the one cup  
icon (fig. 9). To make a long coffee,  
press the LonG icon (fig. 10).  
making latte  
1. After attaching the milk container, place  
frothed milk regulator (B1) on lid to position  
2 for LATTE (fig. 26).  
2. Press the LAttE icon (fig. 27).  
The message “Caffelatte... Jug selector in  
position: 2” appears. After a few seconds,  
frothed milk is delivered from the milk  
spout into the cup below. The milk will stop  
automatically and delivery of coffee will  
begin.  
Information: LonG CoFFEE: when deliver-  
ing more than 4.2 oz, the appliance requests a  
new level measure of pre-ground coffee halfway  
through delivery. When you have added the pre-  
ground coffee, confirm by pressing the oK icon.  
Information: If during delivery you want  
to stop preparing milk, press the LATTE icon or  
interrupt preparation of the coffee by pressing  
the  
icon.  
15  
making cappuccino  
Cleaning the milk container after use  
1. After attaching the milk container, place  
frothed milk regulator (B1) on lid to position  
2 for CAPPUCCINO (fig. 28). the quantity  
of froth can be adjusted by moving the  
regulator towards number 2 for a denser  
froth.  
moving it towards number 1 obtains a less  
dense froth.  
2. Press the CAppuCCIno icon (fig. 29). The  
message “Cappuccino... Jug selector in  
position: 1” appears . After a few seconds,  
frothed milk flows out of the milk spout into  
the cup below.  
Important! Danger of burns When cleaning  
the internal tubes of the milk container, a little hot  
water comes out of the frothed milk tube (B5).  
Avoid contact with splashes of water.  
When “Press CLEAN button” flashes on the  
display (each time you use a milk function):  
1. Leave the jug attached the machine (you do  
not need to empty it);  
2. Place a cup or other recipient under the  
frothed milk spout.  
3. Press the CLEAN button (fig. 32) and keep  
pressing until the progress bar which  
appears on the display together with the  
message “Cleaning...” is complete.  
4. Remove the milk container and always clean  
the nozzle with a sponge (fig. 33).  
The milk will stop automatically and delivery  
of coffee will begin.  
Information! If during delivery you want to  
stop preparing milk, press the CAppuCCIno icon  
or interrupt preparation of the coffee by pressing  
Information!  
the  
icon.  
When “Press CLEAN button” flashes on the  
display, you can still prepare any type of  
coffee or milk. If you have to make a number  
of drinks with milk, wait until you have  
delivered the last cup before cleaning the  
container.  
making Italian macchiato  
1. After attaching the milk container, place  
frothed milk regulator (B1) on lid to position  
2 for ITALIAN MACCHIATO (fig. 28)  
2. Press the ItALIAn mACChIAto icon (fig.  
30). The message “Macchiato... Jug selector  
in position: 2” appears.  
The milk left in the jug can be kept in the  
refrigerator.  
After a few seconds, frothed milk flows out  
of the milk spout into the cup below.  
The milk will stop automatically and delivery  
of coffee will begin.  
programming the size for each beverage  
button  
The appliance is factory preset to automatically  
deliver standard quantities.  
Information: If during delivery you want to  
stop preparing milk, press the italian MACCHIATO  
icon or interrupt preparation of the coffee by  
To change these quantities, proceed as follows:  
1. Place a cup under the coffee spouts and milk  
spout.  
pressing the  
icon.  
2. Press the icon corresponding to the function  
you want to program (LATTE, CAPPUCCINO,  
ITALIAN MACCHIATO or HOT MILK) until  
“Milk for... Program quantity” appears on  
the display and the icon corresponding to  
the selected function flashes.  
making hot milk  
1. After attaching the milk container, position  
the frothed milk regulator (B1) according to  
the quantity of froth you require (pos. 1 =  
little froth; pos. 2 = abundant froth).  
2. Press the hot mILK icon (fig. 31). “HOT  
MILK” appears on the display and after a few  
seconds, frothed milk is delivered from the  
milk spout into the cup below. Delivery of  
milk stops automatically.  
3. Release the icon. The appliance starts  
delivering milk.  
4. When the required quantity of milk has been  
delivered into the cup, press the icon again.  
5. After a few seconds, the appliance starts  
delivering coffee into the cup and the  
message “Coffee for... Program quantity”  
is displayed (with the exception of the HOT  
Information: If during delivery you want to  
stop preparing milk, press the hot mILK icon  
once.  
MILK function) and the  
icon flashes.  
16  
6. As soon as the coffee in the cup reaches the  
CLEAnInG  
required level, press the  
delivery stops.  
icon. Coffee  
Cleaning the coffee maker  
The following parts of the appliance must be  
cleaned regularly:  
The machine is now reprogrammed with the new  
quantities.  
-
-
-
-
coffee grounds container (A18),  
drip tray (A16),  
water tank (A13),  
coffee spouts (A20) and hot water nozzle  
(A11),  
hot WAtEr  
preparation  
Important! Danger of burns. Never leave  
the machine unsupervised while delivering hot  
water. The hot water spout becomes hot while  
water is being delivered and must be held by the  
handle only.  
-
-
pre-ground coffee feed funnel (A8),  
inside the machine, accessible after opening  
the service door (A19),  
brew group (A12),  
milk container (B)  
control panel (C)  
-
-
-
1. Make sure the hot water spout is attached  
correctly (fig. 4).  
2. Place a container under the spout (as close  
as possible to avoid splashes).  
Important!  
Do not use solvents, abrasive detergents  
or alcohol to clean the coffee maker. With  
De’Longhi superautomatic coffee makers,  
you need not use chemical products to clean  
the machine. The descaler recommended  
by De’Longhi is made from natural and  
completely biodegradable substances.  
None of the components of the appliance can  
be washed in a dishwasher with the exception  
of the milk container (B).  
3
Press the  
“Rinsing” “Hot water...” is displayed.  
4. Press the icon to select the “Hot water...”  
icon (fig. 34). The message  
function (the selected message flashes on  
the display) and confirm the selection by  
pressing the oK icon (or cancel the selection  
by pressing the ESC icon).  
5. Water flows out of the spout. Delivery stops  
automatically after 8.5 oz (250ml).  
6. To interrupt delivery of hot water manually,  
Do not use metal objects to remove  
encrustations or coffee deposits as they  
could scratch metal or plastic surfaces.  
press the  
icon again.  
Cleaning the coffee grounds container  
When “EMPTY GROUNDS CONTAINER” is  
displayed,thegroundscontainermustbeemptied  
and cleaned. Until the grounds container has  
been cleaned, the appliance continues to display  
the message and coffee cannot be made.  
To clean:  
Important! You should not deliver hot  
water for more than two minutes at a time.  
Changing the quantity  
The appliance is factory preset to automatically  
deliver8.5 oz(250ml). Tomodifythesequantities,  
proceed as follows:  
1. Position a container under the spouts.  
2. Once the “Hot water” function has been  
selected, press and hold the OK icon (about 8  
seconds) until “Hot water Program quantity”  
open the service door on the front of the  
appliance (fig. 35), extract the drip tray (fig.  
36), empty and clean.  
Empty the grounds container (A18) and  
clean thoroughly to remove all residues left  
on the bottom.  
appears and the  
When the hot water in the cup reaches the  
required level, press the icon again.  
icon flashes.  
Important! when removing the drip tray,  
the grounds container must be emptied, even if  
it is not completely full.  
The machine is now reprogrammed with the new  
quantity.  
If this is not done, when you make the next  
coffees, the grounds container may fill up more  
than expected and clog the machine.  
17  
Cleaning the drip tray  
Important! If the drip tray is not emptied  
regularly, the water could overflow from the edge  
and seep inside or around the machine. This  
could damage the machine, the surface it rests  
on or the surrounding area.  
Cleaning the inside of the machine  
1. Check regularly (about once a week) that the  
inside of the machine is not dirty. If neces-  
sary, remove coffee deposits with a dull knife  
and sponge.  
2. Remove the residues with a vacuum cleaner  
(fig. 40).  
The drip tray is fitted with a level indicator (red)  
showing the level of water it contains (fig. 37).  
Before the indicator protrudes from the cup tray,  
the drip tray must be emptied and cleaned.  
Cleaning the brew group  
The brew group must be cleaned at least once  
a month.  
Important! The brew group (A8) must not  
be removed when the appliance is on. Do not  
attempt to use force to remove the brew group  
as this could damage the machine.  
To remove the tray:  
1. Open the service door (fig. 35);  
2. Remove the drip tray and the grounds  
container (Fig. 36);  
3. Empty the drip tray and grounds container  
(A18) and wash them;  
4. Replace the drip tray complete with grounds  
container (A18);  
5. Close the service door.  
1. Make sure the machine is correctly turned  
off (see Turning off, page 31).  
2. Open the service door (fig. 35);  
3. Remove the drip tray and grounds container  
(fig. 36);  
4. Press the two red release buttons inwards  
and at the same time pull the brew group  
outwards (fig. 41).  
Cleaning the water tank  
1. Clean the water tank (A13) regularly (about  
once a month) with a damp cloth and a little  
mild dish soap.  
2. Clean to remove all soap residues, then rinse  
the water tank thoroughly.  
Important! Do not use detergents or liq-  
uid soap to clean the brew group. The detergent  
would remove the lubricant applied to the inside  
of the piston, causing the brew group to seize up  
and become unusable.  
Cleaning the coffee nozzles  
1. Clean the nozzle periodically using a sponge  
5. Soak the brew group in water for about 5  
minutes, then rinse under the tap.  
6. After cleaning, replace the brew group by  
sliding it onto the internal support and pin at  
the bottom, then push the PUSH symbol fully  
in until it clicks into place.  
or cloth (fig. 38).  
2. Check regularly that the holes in the coffee  
spout are not blocked.  
If necessary, remove coffee deposits with a  
toothpick (fig. 39).  
Cleaning the pre-ground coffee feed funnel  
Check regularly (about once a month ) that  
the pre-ground coffee funnel is not blocked.  
If necessary, remove coffee deposits with a  
dull knife.  
Danger of electric shock! Before perform-  
ing any cleaning operations, the machine must  
be turned off and disconnected from the main  
power supply. Never immerse the coffee maker  
in water.  
18  
DESCALInG  
Information!  
Descale the machine when the message  
“DESCALE!” flashes on the LCD display.  
If the brew group is  
difficult to insert, you  
must first adapt it to the  
Important! Descaler contains acids which  
may irritate the skin and eyes. It is vital to adhere  
to the manufacturer’s safety warnings given on  
the descaler pack and the warnings relating to  
the procedure to follow in the event of contact  
with the skin and eyes.  
right  
dimension  
by  
pressing it forcefully from  
the bottom and top as shown in the figure.  
7. Once inserted, make sure the  
two red buttons have snapped  
out.  
8. Replace the drip tray and  
grounds container.  
Information! Use De’Longhi recommended  
descaler only. Under no circumstances should  
you use sulphamic or acetic based descalers.  
Their use invalidates the warranty. Failure to  
descale the appliance as described above also  
invalidates the warranty.  
9. Close the service door.  
Cleaning the milk container  
Clean the milk container each time you prepare  
milk as described below:  
1. Clean the milk  
container each  
1. Turn the machine on.  
2. Enter the programming menu by pressing  
the p icon.  
3. Press the  
displayed.  
4. Select by pressing the oK icon.  
“Descaling Confirm?” is displayed. Press OK  
to activate the function.  
5. The message “ Add descaler. Confirm?” is  
displayed.  
6. Before confirming, empty the water tank  
(A13).  
time you prepare  
milk as described  
below:  
or  
icon until “Descaling” is  
2. Remove the milk  
spout and intake  
tube.  
3. Remove  
selector  
the  
by  
it  
pulling  
outwards.  
4. Wash all the  
Pour the descaler diluted with water  
(respecting the proportions indicated on the  
descaler bottle) into the water tank.  
Place an empty container with a minimum  
capacity of 50 oz (1.5 L) under the hot water  
spout.  
c o m p o n e n t s  
thoroughly with  
hot water and  
mild dish soap.  
All components  
can be washed  
in a dishwasher,  
placing them in the top basket of the  
dishwasher.  
Important! Danger di of burns Hot water  
containing descaler flows out of the hot water  
spout. Avoid contact with splashes of water.  
7. Confirm by pressing the oK icon.  
8. The message “Descaling Underway...” is  
displayed. The descaling program starts and  
the descaler liquid comes out of the water  
spout.  
The descale program automatically performs a  
series of rinses and pauses to remove limescale  
deposits from inside the machine.  
Make sure there are no milk residues left  
inside the holes and the groove on the fine  
end of the selector.  
5. Check that the intake tube and spout are not  
clogged with milk residues.  
6. Replace the selector, milk spout and intake  
tube.  
7. Replace the lid on the milk container, turning  
it counterclockwise to hook it in place.  
After about 30 minutes, the message “Rinsing  
FILL TANK!” is displayed.  
19  
Setting water hardness  
1. Press the p icon to enter the programming  
9. The appliance is now ready for rinsing  
through with clean water.  
menu.  
2. Press the  
hardness”.  
3. Confirm the selection by pressing the oK  
icon.  
4. Press the  
Remove the water tank, empty, rinse under  
running water, fill with clean water and  
replace. “Rinsing... Press OK” is displayed.  
10. Empty the container used to collect the  
descaler solution and replace it under the hot  
water spout.  
or  
icon and select “Water  
or  
icon to set the number  
of squares formed on the reactive strip (see  
figure in the previous section).  
5. Press the oK icon to confirm the setting.  
6. Press the ESC icon to exit the menu.  
11. Press the oK icon to start rinsing. Hot water  
flows out of the spout and the message  
“Rinsing...” is displayed.  
12. When the water tank is completely empty,  
the message “Rinsing complete... Press OK”  
is displayed.  
The machine is now reprogrammed with the new  
water hardness setting.  
13. Press the oK icon, fill the water tank and the  
appliance is ready for use.  
uSInG CompArtmEnt For LAttE  
SEttInG WAtEr hArDnESS  
The DESCALE message is displayed after a  
period of time established according to water  
hardness.  
The machine is factory set for a hardness value  
of 4 (very hard water).  
GLASS  
To accommodate larger latte cups under the cof-  
fee spouts, lift compartment door (A17) towards  
machine and place glass in compartment.  
The machine can also be programmed according  
to the actual hardness of the tap water in the  
various regions, varying the frequency with  
which the message is displayed.  
soft water  
l
slightly hard water  
ll  
hard water  
lll  
very hard water  
llll  
measuring water hardness  
1. Remove the “TOTAL HARDNESS TEST”  
indicator paper from its pack.  
2. Immerse the paper completely in a glass of  
water for about a second.  
3. Remove the paper from the water and shake  
lightly.  
After about a minute, 1, 2, 3, or 4 red squares  
form, depending on the hardness of the water.  
Each square corresponds to one level.  
20  
DISpLAyED mESSAGES  
DISpLAyED mESSAGE poSSIBLE CAuSE  
rEmEDy  
The water tank is empty or positioned  
incorrectly.  
Fill the tank with water and/or insert it  
correctly, pushing it as far as it will go.  
FILL TANK!  
The grinding is too fine and the coffee is  
delivered too slowly.  
Make the coffee again and turn the  
grinding adjustment knob one click  
clockwise towards “7” while the coffee  
mill is in operation. The effect is only  
visible after delivering two coffees.  
GROUND TOO FINE  
ADJUST MILL!  
Insert water spout and  
press OK  
The machine cannot make coffee as  
there is air in the hydraulic circuit  
Press the oK icon to deliver water from  
the spout until it flows out normally.  
The water spout is not inserted or is  
inserted incorrectly.  
Insert water spout as far as it will go.  
INSERT WATER  
SPOUT!  
The grounds container is too full or  
more than 3 days have passed since you  
last made coffee (this guarantees correct  
hygiene of the machine).  
Empty the grounds container and clean,  
then replace.  
EMPTY GROUNDS  
CONTAINER  
Important: when removing the drip tray,  
the grounds container MUST be emptied,  
even if it is not completely full.  
If this is not done, when you make the  
next coffees, the grounds container may  
fill up more than expected and clog the  
machine.  
After cleaning, the grounds container  
has not been replaced.  
Open the service door and insert the  
grounds container.  
If grounds container is inside the  
machine and message is still displayed,  
there may be a damaged mircoswitch  
and customer service should be called.  
INSERT GROUNDS  
CONTAINER  
The milk container is not inserted. .  
The machine must be descaled.  
Insert milk container as far as it will go.  
INSERT MILK  
CONTAINER!  
The descaling procedure described in  
the “Descaling” section needs to be  
performed as soon as possible.  
DESCALE!  
Too much ground coffee has been used.  
Select a milder taste or reduce the  
quantity of pre-ground coffee, then make  
the coffee again.  
LESS COFFEE!  
The “pre-ground coffee” function has  
been selected without placing any pre-  
ground coffee in the funnel.  
Place pre-ground coffee in the funnel.  
ADD PRE-GROUND  
COFFEE!  
The funnel (A8) is blocked.  
Empty the funnel with the help of a  
dull knife, as described in the section  
“Cleaning the pre-ground coffee feed  
funnel”.  
The coffee beans have run out.  
Fill bean container  
FILL BEANS  
CONTAINER!  
The brew group has not been replaced  
after cleaning.  
Insert the brew group as described in the  
section “Cleaning the brew group”.  
INSERT BREW GROUP  
ASSEMBLY!  
The service door is open  
Close the service door.  
CLOSE DOOR!  
21  
DISpLAyED mESSAGE poSSIBLE CAuSE  
rEmEDy  
The inside of the appliance is very dirty.  
Clean the inside of the appliance  
GENERAL ALARM!  
thoroughly as described in the section  
“Cleaning the inside of the machine”.  
If the message is still displayed after  
cleaning, contact customer services.  
Milk has been delivered recently and the  
tubes inside the milk container must be  
cleaned.  
Press the CLEAN button and keep it  
pressed until the progress bar which  
appears on the display together with the  
message “Cleaning” is complete.  
PRESS CLEAN  
BUTTON  
The appliance is delivering a LONG  
coffee of more than 4.2 oz (125 ml).  
Add a level measure of pre-ground  
coffee and confirm by pressing the oK  
icon.  
ADD PRE-GROUND  
COFFEE!  
PRESS OK  
trouBLEShootInG  
Below is a list of some of the possible malfunctions.  
If the problem cannot be resolved as described, contact customer service.  
proBLEm  
poSSIBLE CAuSE  
rEmEDy  
The cups have not been preheated.  
Warm the cups by rinsing them with hot  
The coffee is not hot  
water.  
The brew group has cooled down  
because 2-3 minutes have elapsed since  
the last coffee was made.  
Before making coffee, rinse as described  
in the notes in the section “Preparing  
coffee using coffee beans”.  
The coffee is ground too coarsely.  
Turn the grinding adjustment knob one  
click anticlockwise towards “1” while the  
coffee mill is in operation (fig. 11).  
Continue one click at a time until coffee  
delivery is satisfactory.  
The coffee is not  
creamy enough  
The effect is only visible after delivering  
two coffees.  
Wrong type of coffee.  
Use a type of coffee for espresso coffee  
makers.  
The coffee is ground too finely.  
Turn the grinding adjustment knob  
one click clockwise towards “7” while  
the coffee mill is in operation (fig. 11).  
Continue one click at a time until coffee  
delivery is satisfactory. The effect is only  
visible after delivering two coffees.  
The coffee is delivered  
too slowly or a drop at  
a time.  
The coffee is ground too coarsely.  
The spouts are blocked.  
Avoid turning the grinding coarseness  
regulator excessively otherwise when  
you select two cups, the coffee may be  
delivered a drop at a time.  
The effect is only visible after delivering  
two coffees.  
The coffee is delivered  
too quickly.  
Clean the spouts with a toothpick (fig.  
39).  
Coffee does not come  
out of one of the  
spouts.  
The holes in the spouts are clogged with  
Clean the spouts with a toothpick,  
The coffee does not  
come out of the spouts,  
but from around the  
service door (A19).  
dry coffee dust.  
sponge or hard bristled kitchen brush.  
The coffee guide (A21) inside the service  
door is blocked and cannot swing.  
Thoroughly clean the coffee guide  
(A21), particularly near the hinges.  
22  
proBLEm  
poSSIBLE CAuSE  
rEmEDy  
The milk is not cold enough or is not  
semi-skimmed.  
You should ideally use skimmed or semi-  
skimmed milk at refrigerator temperature  
(about 41°F).  
If the result is still disappointing, try  
another brand of milk.  
The milk contains  
bubbles or squirts out  
of the milk spout  
The milk frother selector is incorrectly  
Adjust following the instructions in the  
adjusted.  
section on preparing drinks with milk.  
The milk container lid is dirty.  
Clean the milk container lid as described  
in the section “Cleaning the milk  
container”.  
It is not plugged into the power outlet.  
Il caffè è macinato troppo fine.  
Plug into the power outlet.  
The appliance does not  
come on.  
Ruotare la manopola di regolazione  
macinatura di uno scatto verso il numero  
7 in senso orario, mentre il macinacaffè  
è in funzione (fig. 11). Procedere  
Il caffè LonG ha troppa  
crema  
uno scatto alla volta fino ad ottenere  
un’erogazione soddisfacente. Leffetto è  
visibile solo dopo l’erogazione di 2 caffè.  
23  
This warranty applies to Super Automatic Espresso Machines with the De’Longhi brand name.  
LImItED WArrAnty  
What does the warranty cover?  
We warrant each appliance to be free from defects in material and workmanship. Our obligation under  
this warranty is limited to repair at our factory or authorized service center of any defective parts or  
part thereof, other than parts damaged in transit. The repaired or new model will be returned at the  
company expense.  
This warranty shall apply only if the appliance is used in accordance with the factory directions, which  
accompany it, and on an alternating current ( AC ) circuit.  
how long does the coverage last?  
This warranty runs for two years ( 2 ) from the purchase date found on your receipt and applies only to  
the original purchaser for use.  
What is not covered by the warranty?  
The warranty does not cover defects or damage of the appliance, which result from repairs or alterations  
to the appliance outside our factory or authorized service centers, nor shall it apply to any appliance,  
which has been subject to abuse, misuse, negligence or accidents. Also, consequential and incidental  
damage resulting from the use of this product or arising out of any breach of contract or breach of this  
warranty are not recoverable under this warranty. Some states do not allow the exclusion or limitation  
of incidental or consequential damage, so the above limitation may not apply to you.  
how do you get service?  
If repairs become necessary, see contact information below:  
u.S. residents:  
Please contact our toll free hotline at 1-866-528-8323 (1-866-Latte-Best) or log onto our website at  
For all accessories, spare parts or replacement parts, please contact our parts division at 1-800-865-  
6330.  
residents of Canada:  
Residents of Canada: Please contact our toll free hotline at 1-888-335-6644 or log onto our website at  
residents of mexico:  
Please refer to the Limited Warranty statement for Mexico (see page 63 ).  
Please refer to the back page of the manual for De’Longhi addresses.  
The above warranty is in lieu of all other express warranties and representations. All implied warranties  
are limited to the applicable warranty period set forth above. This limitation does not apply if you enter  
into an extended warranty with De’Longhi. Some states do not allow limitations on how long an implied  
warranty lasts, so the above exclusions may not apply to you. De’Longhi does not authorize any other  
person or company to assume for it any liability in connection with the sale or use of its appliance.  
how does state law apply?  
This warranty gives you specific legal rights, and you may also have other rights, which vary from state  
to state  
24  

Mr Coffee Coffeemaker SKX20 099 User Manual
Motorola W5 10 GSM User Manual
Marantz CDR510 User Manual
Lenoxx Electronics CD 89 User Manual
Kenwood KDC 7021 User Manual
HTC EVO Shift 4G TC U250 User Manual
Ericsson R310s User Manual
EarthQuake 9010400 User Manual
APC Smart UPS 1500 VA User Manual
Aiwa XP SP921 User Manual