Table of Contents
Introduction
1
2
2
3
4
6
7
8
9
Quick Start Guide for USB 2.0 7 Port Combo Hub
System Requirements
Package Contents
Specifications
Product Overview
Installation
Appendix A (Troubleshooting)
Appendix B (Radio Interference Statement)
Appendix C (Product Limited Liabilities Warranty)
No. CP-H743P
This USB 2.0/ Firewire Hub puter and workspace by increasing
the number of available USB and Firewire ports. There has never been a more convenient
way to expand your USB and Firewire capacity
System Requirements
Introduction
Any PC or Macintosh computer with an available USB port and USB/Firewire-compliant
USB(Universal Serial Bus) is currently the standard for most computers, notebooks and
peripherals. The USB connections allow the user to easily connect multiple devices. The
USB / Firewire 7 Port Combo Hub (Model. CP-H743P) provides additional
ports to connect up to 4 USB and 3 Firewire devices to a single USB port on your computer.
operating system(Windows 98/98SE/2000/ME/XP, MacOS 8.6 or above, etc.)
An AC power adapter is included for you to use the self-power mode.
The Quick Start Guide contains easy instructions in order to show you how to set up and
start using your
USB Hub
Package Contents
Specifications
This package includes:
FUNCTION
USB Ports
SPECIFICATION
USB 2.0/ Firewire 7 Port Combo Hub (Model CP-H743P)
AC Power Adapter
Downstream
Upstream
7
1
Firewire ports
LEDs
3
5m A-miniB USB cable
USB port status
1(Green LED)
1(Yellow LED)
Bus-Powered
+5V DC
6 Firewire Device cable
Firewire port Status
User Manual
Power Mode
Output Voltage(per port)
Output Current(per port)
Operating Temperature
500mA(max)
5°C~40°C
-20°C~60°C
0~80%RH. Noncondensing
Plastic
Storage Temperature
Humidity
Housing
Weight
72g
Dimensions
102.0 x 58.0 x 21.0 mm
Product Overview
Product Overview - continued
1)USB ports Indicator – Green LED will light when USB Hub is receiving power. If the over
current condition occurs to any of USB ports, The Green LEDs will turn off. indicating a
problem with that device.
1
4
2)USB(Downstream) Ports – Connect your USB devices to these(includes 1 Flash Drive
Port)
3)FireWire Ports –Connect your FireWire devices to this ports
2
4)FireWire ports Indicator –Yellow LED indicates port status and over corrent detection for
Firewire ports. When a device is connected to one of the Firewire ports, The yellow LED
will illuminate. If an over current condition occurs to any of Firewire ports, the Yellow LED
will turn off, indicating a problem with that device.
3
2
5
5)Root(Upstream) Ports –Connect your FireWire devices to this port to provide a link
between the hub and devices.
6
6)AC Adapter Power Connection – Connect your ac power adapter here. This hub operates
in self-powered mode to ensure sufficient power is provided to connect USB devices.
Model CP-H743P
Installation
Appendix A
This USB / Firewire Combo Hub is a plug-and-play device. Your computer will display the
ADD NEW Hardware Wizard after connecting the hub to your computer. Installation may be
done whether your computer is powered on or off. It is not necessary to restart your computer
after installation.
Troubleshooting
ProbProblem
Possible Cause
Action
Unit operates Erratically.
Static electricity may
cause the hub to behave
erratically.
Reset the hub and AC power adapter
by disconnecting it from your
computer. Wait 5 seconds, then
reconnect it.
1)Connect the A-miniB USB cable(include in this package) to the Upstream port on the USB
/ Firewire Combo Hub, then connect the other end of the cable to an unused USB port on
your computer.
USB devices operate
erratically or can’t be
powered on.
Connected USB devices
may require too much
power for bus-powered
operatically
Connect the AC power adapter to
the hub
2)Connect your USB and Firewire devices to the appropriate Downstream ports on the USB
/ Firewire Combo Hub.
Unit fails to operate at all. Non-USB compliant
operating system.
Insure that your computer is fully USB
-compatible and a USB-compliant
operating system is installed.(see
System Requirements section)
Self-Power the Hub:
Plug the AC power adapter into the jack, then plug the power adapter into a well outlet if
additional power is required for connected USB devices.
NOTE:
Please use this USB / Firewire Combo Hub under Self-Power mode.
|