10-06-08
WARRANTY
Crosley Radio Products are warranted against defects in material and
workmanship for a period of 90 days beginning from the date of sale to the
original purchaser.
CR2402A
Should the unit fail under normal usage during the 90 day warranty period, a
request for RETURN AUTHORIZATION (R.A.) must be made by the original
customer before returning the unit. Call Crosley Radio customer service for
Return Authorization at (502) 583-4246 from 9 AM to 5 PM (EST) Monday to
Friday.
Performer
Instruction Manual
Upon receiving the RETURN AUTHORIZATION number from the Customer
Service Department, properly pack your unit in its original packaging. Include
any adapters, parts, & accessories which were originally provided with the
product, along with a check or money order for $19.95 made out to Crosley
Radio to cover the handling and return postage. Display the R.A. # on the
outside of the carton and ship PREPAID via standard UPS or its equivalent.
ATTN: RETURNS DEP'T
2001 PRODUCTION DRIVE
BAY 2 & 3
LOUISVILLE, KY 40299
CROSLEY RADIO assumes no responsibility for units sent without prior Return Authorization.
The purchaser’s bill of sale is the only proof of warranty entitlement and must accompany the unit.
The warranty does not cover damage due to acts of nature, accident, misuse, abuse, negligence, commercial
use or modification of, or to any part of the product. This warranty does not cover damage due to improper
operation or maintenance, connection to improper voltage supply, or attempted repair by anyone other than
a facility authorized by Crosley Radio to service the product. This warranty does not cover products sold
AS IS or consumables (such as fuses or batteries). This warranty is valid only in the United States.
This warranty gives the purchaser specified legal rights in addition to any rights which may vary from state
to state.
In accordance with the "Moss-Magnuson Warranty Act" of July 10, 1975, this is termed a "limited warranty"
which in no way compromises Crosley Radio‚ high standards of Quality and Workmanship.
910-281100-0010-100
CD Operation
Getting Started
Unpacking
Power Source
CD Recording Operation
Recording Cassettes to CD
Preparation
This unit is designed to record CD-R and CD-RW
discs bearing the identification logo “Compact Disc
Recordable” or “CD-Rewritable”. If CD’s do not
conform to this standard, they may not record
properly.
1
Remove packing materials from unit.
1
2
Unwind the AC POWER CORD (42) at the back
of the unit and connect it to a power outlet.
1
2
3
Load a compatible blank CD-R or CD-RW into
the unit.
NOTE: Save all packing materials.
Plug A/C cord into appropriate outlet.
2
3
4
Remove plastic bag covering radio.
Press the FUNCTION button (4/68) to set the
unit to Phono mode.
Remove plastic safety cover from A/C plug.
Recording Records to CD
Load a pre-recorded cassette tape into the
cassette player. Press to PLAY button(38) to get
the cassette to the point in which you want to
start the recording.
AC
Remove tie from A/C cord and untie antenna
wire on back of radio.
1
2
3
Load a compatible blank CD-R or CD-RW into
the unit.
Polarized Plug
Press the FUNCTION button (4/68) to set the
unit to Phono mode.
5
6
7
Open lid and remove styrofoam shipping
material from turntable.
3
This product is equipped with a polarized
alternating current line plug (a plug having one
blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety
feature, If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug
should still fail to fit, contact you electrician to
replace your obsolete outlet. Do not defeat the
purpose of the polarized plug.
4
5
Once the cassette is ready and playing, press
the CD RECORD button (7/55) “Record” will
flash on the LCD. The CD will begin recording.
Set the SPEED CONTROL SWITCH (32) to
the correct speed (33 1/3, 45 or 78 rpm) for
the selected record.
Remove black tie-wrap from under the tone
arm.
Once the first side of the cassette is finished,
press the STOP (12/53) button. The display will
read "CLOSE TK" for one second and then
change to "PHONO".
Remove tape and white protective needle cover
by gently pulling down off the tone arm.
4
Use the CUE LEVER (30) to raise the tone
arm off its rest. Move the tone arm over the
record and use the cue lever to lower it to the
point you want the recording to start.
6
7
8
Eject the cassette tape and flip it over to the
other side.
5
6
Press the CD RECORD button (7/55). “Record”
will show on the LCD. The CD will begin
recording.
Headphones Jack Operation
1
2
Connect headphones to the Headphone Jack (13)
Repeat steps 4 and 5 to record the other side
of the cassette.
Once the first side of the record is finished,
press the STOP(12/53) button. The display will
read “CLOSE TK” for two seconds and then
change to “PHONO”.
Adjust volume to the desired listening level.
8
9
Turn the TURNTABLE SUSPENSION SCREW
(28) clockwise until it is all the way down.
Do not force or over tighten it. This allows the
turntable to float on its shock absorbers.
After recording is completed, press the
STOP (12/53) button. The display will read
"CLOSE TK" for one second and then change
to "PHONO".
NOTE: When using headphones, the sound to the unit
speakers will be cut off.
7
8
Turn the record over and repeat steps 4-6 to
record the other side.
After recording is completed, press the STOP
(12/53) button. The display will read "CLOSE
TK" for two second and then change to
"PHONO".
Headphone Jack(13)
9
Once you have finished the recording, press the
FINALIZE (5/59) button. The display will read
"Finalize".
9
Once you have finished the recording, press
the FINALIZE (5/59) button. The display will
read "Finalize".
Release tone arm hold down clip by gently
pushing to the right. This will unlock tone arm
from its arm rest. Re-lock the hold down clip
when moving the unit to another location.
The sound from all speakers is cut off.
10Once the CD has been finalized, the unit will
return to Phono mode and the display will show
"PHONO". The CD is now ready for use.
10 Once the CD has been finalized, the unit will
return to Phono mode and the display will show
"PHONO". The CD is now ready for use.
NOTE: Headphones not included with unit.
NOTE:If the CD is not finalized, it will not play in any
other CD player. Not all CD players are
compatible with CD-R and CD-RW.s. Check the
owner’s manual for other CD players for
compatibility.
NOTE: If the CD is not finalized, it will not play in any
other CD player. Not all CD players are
compatible with CD-R and CD-RW’s. Check
the owner’s manual for other CD players for
compatibility
.
11
4
CD Operation
Control Locators
Playing a CD
Random Play
Unit Controls
40 Aux In Jack
1
2
Press the FUNCTION button (4/68) to set the
unit to CD mode.
1
2
While playing a CD, press the RANDOM button
(48) on the remote control. “Rand” will show on
the LCD display. The unit will randomly select
songs from the CD.
41 Audio Output Jack
42 AC Power Cord
43 External antenna
44 Adapter For 45 rpm Records
Press the EJECT button (18/46) to open the CD
drawer. Insert a CD into the tray with the label
side facing up.
40
41
To cancel Random playback, press the
RANDOM button (48) again.
3
Press the EJECT button (18/46) again to close
the CD drawer. The display will show “CD Load”
for a few seconds and playback will automatically
begin.
Programmed Playback
1
2
Make sure the CD is stopped.
4
5
To skip forwards or backwards through the tracks
on a CD, press the
(11/64) or
(8/52) buttons.
Remote Controls
Press the PROGRAM button (16/47). " 01" will
shown on the display.
To fast forward or rewind through a track, press
and hold the (11) or (8) buttons on the
45 Power Button
46 Eject Button
control panel. Release the buttons once you
reach the desired position on the track. To use
the remote to fast forward or rewind, press the
3
4
5
Press the
(11/64) or
(8/52)buttons to
43
select a desired track.
42
47 Program Button
48 Random Button
49 Repeat Button
50 Tuning Down Button
51 Find Button
(62) or
(50) button one time. Once the
Press the PROGRAM button (16/47) twice to
store the selected track number.
desired position is reached, press the button
again to resume play.
44
Repeat above steps 3 and 4 to program
additional tracks into memory.
52 Backward Skip
53 Stop Button
54 Folder + Button
55 Record Button
56 Track Split Button
57 Erase Button
58 Band Button(AM/FM)
59 Finalize Button
60 0-9, 10+ Button
61 Mute Button
62 Tuning Up Button
63 Play/CD Pause Button
64 Forward Skip
NOTE: Maximum of 99 tracks can be programmed
Repeat Playback
POWER
EJECT
into memory.
45
1
4
7
0
2
5
3
6
9
1
To repeat a single track, select the desired track
number and press the REPEAT button (49)
once. Press the PLAY button. "Repeat one" will
show on the display and the selected track will
repeat once it is finished.
46
47
60
PROGRAM
RANDOM
REPEAT
FIND
8
48
2
3
To repeat a whole CD, press the REPEAT button
(49) twice. The display will show "Repeat All".
Once the disc is finished, it will start over again
from the beginning.
10+
MUTE
49
61
62
50
51
52
63
64
65
66
67
68
69
70
To turn off the repeat feature, press the REPEAT
button (49) again. The repeat display will
disappear from the LCD.
53
54
FOLDER
-
FOLDER
+
REC
MO/ST
FUNCTION
VOL +
55
56
65 Folder - Button
66 Mono/Stereo Button
67 EQ Button
TRACK
SPLIT
EQ
ERASE
FINALIZE
57
58
VOL -
BAND
68 Function Button
69 Volume Down
70 Volume Up
59
9
6
IMPORTANT SAFETY INSTRUCTION
General
PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS
THAT ARE APPLICABLE TO YOUR EQUIPMENT
1. Read Instructions - All the safety and operating instructions should be read before the product is operated.
2
.
Retain instructions - The safety and operating instructions should be retained for future reference.
3. Heed Warnings - All warnings on the product and in the operating Instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should be followed.
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
Troubleshooting
6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool; and the like.
8. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart combination to overturn.
There is no power
1
Make sure the radio is plugged in correctly.
2
Check to make sure the unit is not in Standby
mode by pressing the Standby button.
9. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from overheating, and these openings must not be blocked
or covered, The openings should never be blocked by placing the product on a bed, sofa, rug, or
other similar surface. This product should not be placed in a built - in installation such as a bookcase
or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
10. Power Sources - This product should be operated only from the type of power source indicated on the marking label,
if you are not sure of the type of power supply to your home. Consult your product dealer or local power company. For
products intended to operate from battery power, or other sources, refer to the operating instructions.
11. Grounding or Polarization - This product may be equipped with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet try reversing the plug, If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12. Power - Cord Protection - Power - supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where they exit from the product.
There is no sound
1
Check the volume level by turning the volume
knob.
NOTE: You can not adjust the volume level once you
begin recording. Make sure the volume is set
at the desired level before you begin recording.
AC
13. Lightning - For added protection for this product during a lightning storm, or when it is left
Polarized Plug
Turntable will not work
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect
1
2
3
4
Make sure the unit is set to Phono mode by
pressing the Function button.
the antenna or cable system. This will prevent damage to the product due to lightning and power - line surges.
14. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
15. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
Make sure the protective needle cover is
removed.
16. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch
dangerous voltage points or short - out parts that could result in a fire or electric shock. Never spill liquid of any kind
on the product.
17. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
Make sure the chrome Turntable Suspension
Screw is screwed all the way down.
Check the cassette player to make sure a
cassette is not playing.
18. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions;
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
CD does not play
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper adjustment of other controls may result in damage and
will often require extensive work by a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or damaged in any way.
1
Check to make sure CD is inserted correctly
(label side facing up).
f. When the product exhibits a distinct change in performance - this indicates a need for service.
19. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
20. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating condition.
21. Wall or ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
22. Heat - The product should be situated away from heat sources such as radiators. Heat registers, stoves, or other
products (including amplifiers) that produce heat.
2
3
4
Check that the surface of the CD is clean
Make sure function switch is set to CD.
Make sure the CD is not blank.
Will not record
1
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Make sure you are using a CD-R or CD-RW CD.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct
the interference by one or more of the following measures:
2
Check that the CD is blank.
Turntable has low volume
1
Remove and reinstall the stylus.
-
-
-
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio TV technician for help.
14
CD Operation
Table of Contents
Welcome
Thank you for purchasing the Crosley Performer
(CR2402A). Before operating this unit, please read
this manual thoroughly and retain it for future
reference.
Getting Started
Manual Track Division
Erasing a CD-RW
Unpacking.................................
4
4
Power Source...........................
If using a CD-RW, you can erase the whole CD and
rerecord it. Erase procedures are only possible with
CD-RW discs. It is not possible to erase or rerecord
a CD-R CD. To erase a CD-RW, follow the steps
below.
You can divide your recording into separate tracks
if you wish. By doing this, each song will have its
own sequential track number. To do this, you must
use the SPLIT TRACK button (6/56).
Control Locators....................... 5-6
About This Manual
Instructions in this manual describe the control
functions of the CR2402A.
Basic Operation
While Recording your record , listen for the end of
each song. There will usually be a brief silence
between songs. Once you are at the end of the
song, press the Split Track button. The recording
will then go to the next track number by increments
of one. Once the recording is finished, you can press
General.....................................
7
7
Included in the package:
Performer
Remote Control
45 RPM adaptor
1
Press the FUNCTION button (4/68) to set the
unit to CD mode.
Radio Operation.......................
Turntable Operation..................
Cassette Operation..................
8
8
2
3
4
Load a recorded CD-RW into the unit.
the
(11/64) or the (8/52) buttons to go to
the beginning of each song.
Press the STOP button (12/53) to stop playback.
CD Operation
Playing a CD............................... 9
Programmed Playback................ 9
Press the ERASE button (2/57). ERASE / Y will
appear on the display ,Press PLAY Button(14/63)
to confirm and the erasing process will begin,if
cancel please press the STOP Button(12/53) .
When finished, the display will first read “F Done”
and then “BLANK CD”.
Playing MP3 CD’s...................... 10
Recording records to CD........... 11
Recording cassettes to CD........ 11
5
The CD is now ready to record.
Erasing CD-RW CD’s................. 12
NOTE: Once a CD is erased, the contents that were
on the CD cannot be retrieved.
Audio / Connections
Audio.......................................... 13
General
Troubleshooting Guide................ 14
Warranty....................................... 15
12
CD Operation
Control Locators
1
Playing MP3 CD’s
Search Play
Unit Controls
MP3 CD’s normally contain many files. By using the
search features described below, you can easily and
quickly locate albums or songs. Follow the steps
below to use the search feature.
This unit will play CD’s recorded in MP3 format. All
the controls and functions work the same as a regular
CD. Listed below are features and instructions that
are unique to playing a MP3 CD.
1
2
3
4
Speakers
Erase Button
Search by File Name
Band Button(AM/FM)
Function Button
(CD/PHONO/RADIO/AUX)
Finalize Button
Track Split Button
Record Button
Folder/Album Playback
Search by File Name
27 26 25 24 23
22
21
5
6
7
8
9
1
2
In stop or play mode, press the FIND (17/51)to
start the alphabetic and numerical search.
If your MP3 CD is separated into folders, follow the
steps below to access the folders.
Backward Skip
Line In Jack
Press the FOLDER+(19/54) or the FOLDER-
(20/65) buttons to select the corresponding letter
or number of the track you are searching for.
1
While the CD is stopped, press the FOLDER+
(19/54) or the FOLDER- (20/65) buttons to
advance forward or backwards through the
folders on your disc.
10 CD Drawer
2
20
11 Forward Skip
12 Stop Button
13 Headphone Jack
14 Play/Pause
15 Power Button
16 Program Button
17 Find Button
18 Eject Button
19 Folder + Button
20 Folder - Button
21 Tuning Knob
22 Dial Scale
23 LCD Display
24 Stand By Indicator
25 Stereo Indicator
26 Sensor
27 Volume Knob
28 Turntable Suspension Screw
29 Hold Down Clip
30 Cue Lever
31 Tone Arm Rest
32 Speed Control Switch
33 Tone Arm
3
4
When the desired track is found, press the
PLAY (14/63) button to start playing the selected
track.
19
3
5
4
6
18
16
17
7
15
2
3
Once the desired folder is reached, use the
FORWARD SKIP(11/64) or the BACKWARD
SKIP(8/52) buttons to select the desired track.
8
To exit search mode press the FIND button until
the " " disappears from the LCD display.
14
Press the PLAY (14/63) to begin playback of the
selected track.
9
10
11
12
13
Search by Folder / Album Title
28 29
30
1
While the CD is stopped, press the FIND (17/51)
button twice to start to browse the album. The
search icon, ALBUM 001 and its name will be
shown on the display.
CD Information
If the MP3 CD has track information stored on it,
such as artist and title, the LCD will display that
information during playback of the CD.
2
3
Press the FOLDER+ (19/54) or FOLDER - (20/65)
button repeatedly to select the desired album.
31
32
33
Press the FORWARD SKIP(11/64) or the
BACKWARD SKIP(8/52) buttons to select the
desired folder/album.
1
2
3
While the MP3 disc is playing, press the BAND
(3/58) button.
NOTE: The search feature will only work if the MP3 CD has
information such as Folder, Artist and Song titles
already stored on the CD. This information is added
at the time the CD is created and cannot be added
afterwards.
The CD information will start to scroll across the
LCD.
34
34 Turntable
35 Stop/Eject
36 Fast Forward
37 Rewind
38 Play
NOTE: You cannot record MP3 CD’s with this unit. They
must be created with a computer or other device.
Press the BAND (3/58) button again to cancel
the information.
NOTE: If the CD was recorded without any track information,
UNKNOWN will be displayed when the BAND
button is pressed.
39 Cassette Door
37 35
36
5
10
38
39
Basic Operation
Basic Operation
General
Antenna
Turntable Operation
Playing a Cassette
Antenna: for FM reception, the unit is provided with
a FM WIRE ANTENNA (43) , move the wire until
the reception is clear and with no interferences. For
AM reception, the unit is provided with a directional
build-in ferrite antenna. Rotate the set to find the
position in which the best reception is obtained. Do
1
2
Press the FUNCTION button (4/68) to set the
unit to Phono mode.
1
2
3
Make sure the unit is plugged in correctly to an
AC outlet.
1
2
While in Phono mode, press the
STOP/EJECT(35) button on the cassette player
to open the cassette door.
Press the POWER button (15/45) to turn on the
unit .
Set the SPEED CONTROL SWITCH (32) to
the correct speed (331/3, 45 or 78 rpm) for the
selected record.
Insert a prerecorded cassette tape into the
cassette door.
not connect the EXTERNAL FM ANTENNA (43) to
any outside antenna.
Once the power is turned on, press the
FUNCTION button (4/68) to switch between
CD/Tuner/Phono/Aux. When switching between
functions, wait one second after pressing the
function button before pressing it again. This
gives the unit time to load the correct information
for the selected function.
3
4
Use the CUE LEVER (30) to raise the tone arm
off its rest. Move the tone arm over the record
and use the cue lever to lower it to the point
you want the record to start.
3
4
Press the PLAY button (38) to begin play.
To stop playback, press the STOP/EJECT (35)
button.
At the end of the record, the tone arm will return
to its rest.
5
Press the STOP/EJECT (35) button again to
eject the cassette.
NOTE:The turntable and cassette players both operate
in the same mode. Make sure the cassette
player is in STOP mode when listening to a
record.
Radio Operation
To Fast Forward or Rewind
1
2
Press the FUNCTION button (4/68) to set the
unit to Tuner mode
1
2
3
While playback is stopped, press the FAST
FORWARD (36) or REWIND (37) button to fast
forward or rewind the cassette.
Accessory: ADAPTER FOR 45 RPM
Press the BAND button (3/58) to select the
desired tuning band (AM/FM).
Once the desired position is reached on the
cassette, press the STOP/EJECT (35) button
to stop the cassette.
To play the 45rpm record, place the ADAPTER (44)
on the spindle.
3
4
Select the desired radio station by rotating
TUNING KNOB (21).
Adjust the volume to the desired listening level.
Press the PLAY (38) button to begin play.
NOTE: The cassette player plays the side of the
cassette facing away from the unit. To
play the other side of the cassette, you
must eject the cassette and turn it over.
7
8
|