Corsair Obsidian
Series 800D
User Manual
Corsair Obsidian Series 800D
High Performance Computer Chassis
Obsidian Series 800D
USER MANUAL
2.4. How to install a hard drive into the lower 3.5” drive bays .........................................................14
2.5. How to use the CPU heatsink backplate door ............................................................................16
2.6. How to install an optical drive ....................................................................................................17
2.7. How to install the motherboard .................................................................................................18
2.8. How to install the power supply .................................................................................................20
2.9. How to remove or add case fans ................................................................................................20
140mm HDD Bay fan...........................................................................................................20
120mm lower HDD Bay fan.................................................................................................22
Top case exhaust fans.........................................................................................................22
Rear case fan.......................................................................................................................22
Bottom intake fan ...............................................................................................................23
How to remove the dust filter for maintenance.....................................................................23
How to install add-in cards .....................................................................................................24
How to connect the front panel connectors...........................................................................25
2.12.1. Audio, USB, 1394A, etc. .....................................................................................................25
2.12.2. Power, Reset, HDD LED, PWR LED .....................................................................................25
3.0. Support and Warranty Info........................................................................................ 26
3.1. Contacting Technical Support.....................................................................................................26
Warranty Information................................................................................................................26
3
Obsidian Series 800D
USER MANUAL
1.0.
1.1.
Product Overview
Specifications
24" (H) x 24" (L) x 9" (W) - (609mm x
Dimensions
609mm x 229mm)
Aluminum Faceplate, Steel Structure
Black
Material
Color
800D
Model
(x5) 5.25"
(x4) 3.5" SATA Hot Swappable
(x2) 3.5" Internal
(x3) 140mm Fans
Up to 4x 120mm Fans (not included)
7 (+1 vent)
Drive Bays
Cooling
Expansion Slots
Motherboard
ATX, mATX, EATX
(x4) USB 2.0
(x1) IEEE1394
Front I/O
(x1) Headphone, (x1) MIC
ATX (not included)
Power Supply
4
Obsidian Series 800D
USER MANUAL
1.2.
Parts List
1 – Side Panels
9 – HDD Drive Dock Door
10 – Front Bezel
17 – Lower HDD bay shield
2 – 140mm rear fan
18 – HDD Drive Dock Fan Shroud
19 – 140mm HDD fan
3 – 3 x 120mm top fan vents
4 – CPU backplate cover
5 – Small rubber grommet
6 – Large rubber grommet
7 – PSU bay shield
11 – Lower HDD bay cover
12 – Lower HDD bay rails
13 – 140mm intake fan
14 – Case feet
20 – HDD SATA Backplane Shield
21 – Front I/O ports
22 – Front I/O port cover
15 – HDD Drive Dock trays
16 – Tool-free mechanism
8 – 5.25” Bay Covers
5
Obsidian Series 800D
USER MANUAL
1.3.
Accessories Included
Image
Part Name
Qty
Used for
Copper Stand Off
(color black)
16
M/B Tray
Hard Drive and Motherboard
Screws
Motherboard, Hard
Drives
36
14
6
(color black)
Case Fan Screws
(color black)
For top mount fans
Lower Hard Drive Bay Fan Screws
(color black)
For lower HDD bay
fan
Drive Rails
(color black)
Lower HDD bay drive
install
4
1
Rubber Vibration Damper for
120mm fan
Lower HDD bay fan
(color black)
SATA power connector adapter
(color black)
SATA backplane
power
1
8
4
Nylon zip ties
(color black)
Cable management
SATA backplane data
SATA data cables
(color black)
Extends CPU power
connector on PSUs
with shorter power
leads
8-pin CPU power connector
extension cable
1
6
Obsidian Series 800D
USER MANUAL
2.0.
Operation
2.1.
How to remove and re-install side panels
2.1.1.
Removing the side panel
Press and hold the release button on the rear of the case for the corresponding side panel.
Gently pull the side panel away from case and then lift vertically to remove the panel.
PULL TOWARDS YOU
THEN LIFT
2.1.2.
Re-installing the side panel
Step 1 – Slide the side panel back into the case, making sure to catch the three grooved
latches at the locations indicated above.
7
Obsidian Series 800D
USER MANUAL
Step 2 - Once the panel is securely latched to the bottom of the case, tilt the side panel
back up into the case while holding the corresponding release button. When the side panel
is flush, release the button and the side panel will lock into place.
2.2.
How to remove and re-install the front panel
2.2.1.
Removing the front panel
Standing in front of the case, reach under the bottom of the front panel and, using firm
pressure, pull upwards and forwards. The front panel is not held in place with any screws
or wires, but must be removed in order to access the lower drive bay or remove 5.25” bay
covers
Grasp here. Pull
firmly but carefully.
8
Obsidian Series 800D
USER MANUAL
2.2.2.
Re-installing the front panel
Once you are ready to re-install the front panel, line up the mounting pegs with the holes,
as indicated in the above image. Press the front panel firmly on the locations indicated until
it latches.
2.3.
How to install a hard drive into the hot-swap drive dock
2.3.1.
Attaching cables to the SATA backplane
Step 1 – Remove the cover of the SATA backplane as shown.
9
Obsidian Series 800D
USER MANUAL
Step 2 – Connect the included power cable to the SATA backplane.
Step 3 – Connect the included SATA data cables to the SATA backplane.
10
Obsidian Series 800D
USER MANUAL
Step 2 – Remove the drive carrier
Press the release switch and pull the drive carrier out of the drive bay using the pull tab.
Step 3 – Install the SATA hard drive into the drive carrier
Use the four provided screws (two per side).
12
Obsidian Series 800D
USER MANUAL
Step 4 – Re-install the drive carrier into the drive bay.
Gently slide the drive carrier back into the drive bay, leaving the pull handle open. Once the
carrier is secure in the bay, close the handle until it latches shut.
2.3.3.
Reversing the front door (optional)
Step 1 – Open front door and press in carefully on the two latches highlighted above.
13
Obsidian Series 800D
USER MANUAL
Step 2 – Relocate the door as seen here, holding both latches until lined up with the
appropriate holes.
2.4.
How to install a hard drive into the lower 3.5” drive bays
Step 1 - With the front panel of the case removed (see 2.2.1), simultaneously press the
top and bottom tabs of the lower hard drive bay cover plate.
14
Obsidian Series 800D
USER MANUAL
Step 2 - Use the included drive rails, one per side, as pictured above.
Step 3 - Once the drive rails are installed on the drive, slide it into the bay until it clicks in
place and is secure.
Step 4 - Re-attach the drive bay cover plate as shown.
15
Obsidian Series 800D
USER MANUAL
2.6.
How to install an optical drive
Step 1 – Remove the front panel from the case (see 2.2.1).
Step 2 – Decide which bay you will use and remove the corresponding front drive bay
cover from the front panel.
Step 3 – Slide your optical drive into the appropriate bay.
17
Obsidian Series 800D
USER MANUAL
Step 4 – When the screw hole lines up as shown below, push the latch forward until it
locks, then re-install the case front panel as in 2.2.2.
2.7.
How to install the motherboard
Step 1 – Determine what type of motherboard you have and install the black colored
copper standoffs appropriately. (NOTE: standoffs may be pre-installed for some common
board layouts)
18
Obsidian Series 800D
USER MANUAL
Step 2 – Place the I/O plate in the rear of the case. (This is provided by the motherboard
manufacturer).
Step 3 – Line up the motherboard with the I/O shield and the mounting holes, and use the
screws provided to secure the motherboard into the case.
19
Obsidian Series 800D
USER MANUAL
Step 2 - You now have access to the four screws that hold the 140mm fan in place.
Remove these screws to remove or replace this fan.
Step 3 – Replace the hot-swap drive bay fan cover.
21
Obsidian Series 800D
USER MANUAL
2.9.2.
120mm lower HDD Bay fan
See instructions above for 140mm fan installation for hot-swap drive bay. Use the included
screws and rubber fan grommet to install a 120mm fan in the space provided (see below).
2.9.3.
Top case exhaust fans
Use the provided case fan screws to screw the fans into the top of the case.
2.9.4.
Rear case fan
Remove screws from rear of case as shown above.
22
Obsidian Series 800D
USER MANUAL
2.9.5.
Bottom intake fan – Remove screws from case separator, as shown.
2.10.
How to remove the dust filter for maintenance
Remove the dust filter – pull the tab from the bottom rear of the case to remove dust
filter. Clean using a clean, damp cloth or canned air. Once the filter is dry, replace it by
sliding it back in between the rails.
23
Obsidian Series 800D
USER MANUAL
2.12.
How to connect the front panel connectors
2.12.1.
Audio, USB, 1394A, etc.
Connectors are indicated with the pin-outs as shown.
2.12.2. Power, Reset, HDD LED, PWR LED
Pin 1 is indicated by a small arrow on the connector. For more information, see your
motherboard manual.
25
Obsidian Series 800D
USER MANUAL
3.0.
3.1.
Support and Warranty Info
Contacting Technical Support
Corsair Technical support can be reached by using any of the methods listed below.
Online: http://www.corsair.com/helpdesk
Forum: http://www.asktheramguy.com
Phone: 1 (888) 222-4346
3.2.
Warranty Information
Limited Warranty And Limitation of Liability
The Product is guaranteed for twenty four (24) months from the date of delivery to the
end-user against defects in materials or workmanship. During this period, the Product will
be repaired or have parts replaced, at our discretion, provided that: (I) the Product is
returned to the agent from whom it was purchased with shipping prepaid; (II) the Product
has been purchased by the end-user and not used for hire purposes; (III) the Product has
not been misused, handled carelessly, or other than in accordance with any instructions
provided with respect to its use; (IV) the Product has not been damaged due to acts of
nature, such as lighting, fire, flood, or earthquake; (V) any and all warranty stickers have
not been removed or tampered with.
Corsair Memory’s warranty on the Product is to the first end user or consumer only, in
accordance with the Corsair Memory’s Limited Warranty. All warranties, express or
implied, including without limitation the implied warranties of merchantability
and fitness for a particular purpose, shall be limited to the duration of the
guarantee above. The repair, replacement, or refund as provided under this
express limited warranty is the exclusive remedy of the consumer, and is
provided in lieu of all other warranties, express or implied. In no event shall
Corsair Memory be liable, whether in contract or tort (including negligence) for
damages in excess of the purchase price of the product, or accessory, or for any
indirect, incidental, special or consequential damages of any kind, or loss of
revenue or profits, loss of business, loss of information or data, software or
26
Obsidian Series 800D
USER MANUAL
applications or other financial loss arising out of or in connection with the ability
or inability to use the products or accessories to the full extent these damages
may be disclaimed by law.
Corsair Memory’s total liability, whether for breach of contract, warranty, tort
(including negligence), indemnification or otherwise, is limited to the price of
the Product sold under these terms with respect to which losses or damages are
claimed. In no event will Corsair Memory be liable for any loss of use, loss of
time, inconvenience, commercial loss, lost profits or savings or other indirect,
incidental, special or consequential damages to the full extent that may be
disclaimed by law. The limitations, exclusions and disclaimers in these terms
shall survive a fundamental breach or breach or the failure of the essential
purpose of these terms or of any remedy contained herein. No action will be
brought for any breach of these terms more than one year after the accrual of
such cause of action. For the purpose of this paragraph, "Corsair Memory"
includes its affiliates and its and their respective directors, officers, employees
and agents, each of whom shall be considered as a trust beneficiary.
27
|