Clarion ProAudio DXZ935 User Manual

Owner’s manual  
Mode d’emploi  
Manual de instrucciones  
HIGHEND AM/FM RADIO CD PLAYER COMBINATION  
COMBINE CD RADIO FM/AM HAUT DE GAMME  
COMBINACIÓN DE RADIO DE AM/FM Y REPRODUCTOR  
DE DISCOS COMPACTOS DE ALTA POTENCIA  
Clarion Co., Ltd.  
All Rights Reserved. Copyright © 2001: Clarion Co., Ltd.  
Printed in China / Imprimé en Chine / Impreso en China  
PE-2577B  
280-7875-00  
2002/08 (A·C)  
Dual Action  
2. PRECAUTIONS  
G When the Sirius Satelite Radio  
What is Sirius Satellite Radio?  
This unit uses Dual Action to make large-screen  
displays possible.  
2. Before the DUAL ACTION closes, there may  
be a braking sound from the safety mecha-  
nism. This is normal.  
1. When the inside of the car is very cold and the  
player is used soon after switching on the  
heater moisture may form on the disc or the  
optical parts of the player and proper playback  
may not be possible. If moisture forms on the  
disc, wipe it off with a soft cloth. If moisture  
forms on the optical parts of the player, do not  
use the player for about one hour. The conden-  
sation will disappear naturally allowing normal  
operation.  
Sirius is radio the way it was meant to be: Up to  
100 new channels of digital quality programming  
delivered to listeners coast to coast via satellite.  
That means 50 channels of completely commer-  
cial-free music. Plus up to 50 more channels of  
news, sports, and entertainment from names  
like CNBC, Discovery, SCI-FI Channel, A&E,  
House of Blues, E!, NPR, Speedvision and  
ESPN.  
severe vibration may cause the sound to skip.  
is connected  
When you use the Dual Action, be sure to close  
it.  
3. When the auto antenna cord is connected to  
the car auto antenna cord, when the unit is  
switched to the radio mode (or the TV mode),  
the antenna is extended automatically. If the car  
is in a narrow space, the antenna may strike  
something, so be careful.  
For details, refer to the Owners Manual  
3. If you move the DUAL ACTION by hand, this  
may create play. To correct this play, with the  
power on for the unit, press the [O] button to  
close the DUAL ACTION.  
provided with the Sirius Satelite Radio.  
CAUTION  
[FNC] button  
Press the buton to switches the operation  
mode among the SIRIUS mode, etc.  
BE CAREFUL NOT TO GET YOUR FINGERS  
CAUGHT WHEN OPENING AND CLOSING  
THE DUAL ACTION.  
4. After a disc is ejected, the DUAL ACTION au-  
tomatically returns to the tilted or closed  
state. If there is any obstruction when the  
DUAL ACTION tries to close, the safety  
mechanism is triggered and the DUAL AC-  
TION returns to the open state. If this hap-  
pens, remove the obstruction, then press the  
[O] button.  
4. This unit uses a precision mechanism. Even in  
the event that trouble arises, never open the  
case, disassemble the unit, or lubricate the ro-  
tating parts.  
[SC] button  
Press the button to preform category scan  
while in the SIRIUS mode.  
1. For safety’s sake, always close the DUALAC-  
TION before leaving this unit unused for a  
prolonged period or switching OFF the igni-  
tion key.  
Sirius is live, dynamic entertainment, completely  
focused on listeners. Every minute of every day  
of every week will be different. All 50 commer-  
cial-free music channels are created in-house  
and hosted by DJs who know and love the mu-  
sic. Do you like Reggae? How about Classic  
Rock or New Rock? Sirius has an array of  
choices spanning a vast range of musical tastes  
including the hits of the 50s, 60s, 70s, & 80s  
as well as Jazz, Country, Blues, Pop, Rap, R&B,  
Bluegrass, Alternative, Classical, Heavy Metal,  
Dance and many others...  
2. Driving on extremely bumpy roads which cause  
Press and hold the button to perform preset  
scan while in the SIRIUS mode.  
If you switch OFF the ignition key with the  
DUAL ACTION tilted, the DUAL ACTION  
does not close.  
This equipment has been tested and found to com-  
ply with the limits for a Class B digital device, pur-  
suant to Part 15 of the FCC Rules.  
CAUTION  
[DIRECT] button  
Stores a station into memory or recall it di-  
rectly while in the SIRIUS mode.  
5. To avoid scratching the compact disc, keep  
the 12 or 8 cm CD level when inserting or re-  
moving them.  
USE OF CONTROLS, ADJUSTMENTS, OR PER-  
FORMANCE OF PROCEDURES OTHER THAN  
THOSE SPECIFIED HEREIN, MAY RESULT IN  
HAZARDOUS RADIATION EXPOSURE.  
These limits are designed to provide reasonable  
protection against harmful interference in a resi-  
dential installation.  
[a], [d] buttons  
Handling Compact Discs  
Press the buton to selects a station.  
THE COMPACT DISC PLAYER and MINI DISC  
PLAYER SHOULD NOT BE ADJUSTED OR RE-  
PAIRED BY ANYONE EXCEPT PROPERLY  
QUALIFIED SERVICE PERSONNEL.  
This equipment generates, uses, and can radiate  
radio frequency energy and, if not installed and  
used in accordance with the instructions, may  
cause harmful interference to radio communica-  
tions. However, there is no guarantee that inter-  
ference will not occur in a particular installation.  
CD player or it may damage the CD player.  
[SAT] button  
Press the buton to switches the SIRIUS  
mode.  
Use only compact discs bearing the  
or  
Do not use compact discs that have large  
scratches, are misshapen, cracked, etc. Use of  
such discs may cause misoperation or damage.  
mark.  
From its state-of-the-art, digital broadcasting fa-  
cility in Rockefeller Center, New York City, Sirius  
will deliver the broadest, deepest mix of radio  
entertainment from coast to coast.  
Do not play heart-shaped, octagonal, or other  
specially shaped compact discs.  
CHANGES OR MODIFICATIONS NOT EX-  
PRESSLY APPROVED BY THE MANUFAC-  
TURER FOR COMPLIANCE COULD VOID THE  
USER’S AUTHORITY TO OPERATE THE EQUIP-  
MENT.  
To remove a compact disc from its storage case,  
press down on the center of the case and lift the  
disc out, holding it carefully by the edges.  
Some CDs recorded in CD-R/CD-RW mode may  
not be usable.  
If this equipment does cause harmful interference  
to radio or television reception, which can be de-  
termined by turning the equipment off and on, the  
user is encouraged to consult the dealer or an ex-  
perienced radio/TV technician for help.  
Sirius will bring you music and entertainment  
programming that is simply not available on tra-  
ditional radio in any market across the country.  
Its radio like youve never heard before.  
• Do not use commercially available CD protec-  
tion sheets or discs equipped with stabilizers,  
etc. These may damage the disc or cause  
breakdown of the internal mechanism.  
Handling  
Compared to ordinary music CDs, CD-R and CD-  
RW discs are both easily affected by high tem-  
perature and humidity and some of CD-R and  
CD-RW discs may not be played. Therefore, do  
not leave them for a long time in the car.  
INFORMATION FOR USERS:.  
So Get Sirius and Listen Up! For more informa-  
tion, visit siriusradio.com.  
CHANGES OR MODIFICATIONS TO THIS PROD-  
UCT NOT APPROVED BY THE MANUFAC-  
TURER WILL VOID THE WARRANTY AND WILL  
VIOLATE FCC APPROVAL.  
Storage  
• Do not expose compact discs to direct sunlight  
or any heat source.  
• New discs may have some roughness around  
the edges. If such  
• Do not expose compact discs to excess hu-  
midity or dust.  
Ball-point pen  
discs are used, the  
player may not work  
or the sound may  
• Do not expose compact discs to direct heat  
from heaters.  
Roughness  
skip. Use a ball-point  
pen or the like to re-  
move any roughness  
from the edge of the  
disc.  
Cleaning  
To remove fingermarks and dust, use a soft  
cloth and wipe in a straight line from the center  
of the compact disc to the circumference.  
• Do not use any solvents, such as commercially  
available cleaners, anti-static spray, or thinner  
to clean compact discs.  
Never stick labels on the surface of the compact  
disc or mark the surface with a pencil or pen.  
• Never play a compact disc with any cellophane  
tape or other glue on it or with peeling off  
marks. If you try to play such a compact disc,  
you may not be able to get it back out of the  
• After using special compact disc cleaner, let  
the compact disc dry off well before playing it.  
Bottom View of Source Unit  
Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.  
Cerciórese de desplegar y de leer la página siguiente.  
8
DXZ935  
DXZ935  
3
DXZ935  
4
Major button operations when external equipment is  
connected to this unit  
3. CONTROLS/LES COMMANDES/CONTROLES  
4. NOMENCLATURE  
Note:  
[RP] button  
GWhen the CD/MD/DVD changer  
Source unit / Appareil pilote / Unidad fuente  
• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).  
Press the button to turn on or off the AF (Alter-  
native Frequency) function in the DAB mode.  
(This function is only DAB tuner.)  
is connected  
Names of the Buttons and their Functions  
For details, see the section CD/MD/DVD  
changer operations. For the DVD  
changer, refer to the Owners Manual pro-  
vided with the DVD changer.  
[RD] button  
[RELEASE] button  
Deeply press the button to remove the DCP.  
[RP] button  
Plays repeatedly while in the CD mode.  
[
]
[
]
FNC  
VSE  
Use the button to set the PTY (Programme Type)  
standby mode or PTY items in the DAB mode.  
[SC] button  
[
]
RELEASE  
[
]
[
]
SAT  
EQ  
[VSE] button  
[SC] button  
Switches the TV picture mode or VTR (external)  
picture mode.  
Performs scan play for 10 seconds for each  
track. Disc scan play is performed when the  
button is pressed and held.  
Press to enter VSE mode or the Position  
Performs preset scan while in the radio mode.  
When the button is pressed and held, auto  
store is performed.  
mode.  
[DIRECT] button  
When the button is pressed and hold for 1 sec-  
ond or longer, the mode is turned on or off.  
[ ]  
O
[RP] button  
Stores a station into memory or recall it directly.  
Performs scan play for 10 seconds for each  
Performs repeat play. When this button is  
[a], [d] buttons  
[
[
]
track while in the CD mode.  
DISP  
pressed and held, disc repeat play is performed.  
[EQ] button  
Press to enter the EQ mode.  
Selects a station.  
]
[BND] button  
A-M  
[RD] button  
[BND] button  
Switches the band, or seek tuning or manual  
tuning while in the radio mode.  
When the button is pressed and hold for 1 sec-  
ond or longer, the mode is turned on or off.  
Performs random play. Also performs disc ran-  
dom play when the button is pressed and  
held.  
Switches the band.  
[
]
RD  
When the button is pressed and held,  
switches seek tuning or manual mode.  
Plays a first track while in the CD mode.  
[FNC] button  
[DIRECT] button  
Designates the disc to be played.  
[TITLE] button  
Use the button to input a title in the CD mode  
and radio mode.  
Press the button to turn on the power.  
Press and hold the button for 1second or  
longer to turn off the power.  
[
]
[
[
]
ISR  
[
]
[
]
SC  
DIRECT  
PLII  
GWhen the DTS/DOLBY DIGITAL  
[
]
[
]
[
]
]
RP  
ROTARY  
TITLE  
BND  
[DISP] button  
is connected  
[VSE] button  
Switches the operation mode among the ra-  
Press and hold the button for 1 second or  
Switches the clock or selects the title mode.  
dio mode, etc.  
longer to enter the adjust mode.  
When the button is pressed and held, the user  
titles or disc titles are switched.  
Press the button to turn on the DSF.  
[SAT] button  
[a], [d] buttons  
After DSF is selected, press and hold the  
[VSE] button for 1 second or longer to turn to  
off DSF effect.  
This button is available only when the unit is  
connected with Satellite Digital Radio Tuner  
(sold separately DSH920S).  
Selects a station while in the radio mode or  
selects a track when listening to a CD. These  
buttons are used to make various settings.  
[TITLE] button  
Use the button to input a title in the CD  
changer mode.  
With the Dual Action opened / Lorsque la Double action est ouverte  
Con el panel frontal de acción doble abierto  
[PLII] button  
Use the button to scroll the title during CD-text  
play or MD changer play in the CD changer mode.  
[ROTARY] knob  
Adjust the volume by turning the knob clock-  
wise or counterclockwise.  
[
] button  
Press the button to turn on the PLII, and each  
time to press PLII mode changes following or-  
der:  
[
]
[
CD EJECT  
]
RESET  
[
]
CD SLOT  
Plays or pauses a CD while in the CD mode.  
[
] button  
Used as Enter buttonwhile the unit is in the  
Plays or pauses a CD, MD or DVD.  
Use the knob to perform various settings.  
ADJ mode.  
Music mode Matrix mode Movie mode  
[a], [d] buttons  
Virtual mode mode off  
[PLII] button  
[O] button  
Selects a track when listening to a disc.  
Press to select the Dolby Pro Logic II mode.  
Use the button to open the dual action.  
[BND] button  
Plays a first track.  
[DIRECT] button  
Stores a station into memory or recall it di-  
rectly while in the radio mode.  
[DISP] button  
Switches the display indication (Main display,  
clock display).  
Used as disc up buttonwhile the unit is in  
the DVD changer mode.  
[CD SLOT]  
[A-M] button  
GWhen the TV/DAB is connected  
CD insertion slot.  
Use the button to switch to the audio mode  
(balance/fader/sub.w/center SP/NF. adjust-  
ment)  
For details, see the section TV opera-  
[CD EJECT] button  
Press to eject a CD loaded in the unit.  
tionsor DAB operations.  
[SC] button  
[RD] button  
Performs random play while in the CD mode.  
Press to open the CD slot and insert a CD.  
Used to perform preset or category scan  
while the unit is in the radio mode. When the  
button is pressed and held, auto store is  
performed.(This function is available only in  
the TV tuner mode.)  
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.  
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.  
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.  
[RESET] button  
Press to reset the system.  
[ISR] button  
Recalls ISR radio station in memory.  
Press and hold for 2 seconds or longer:  
Stores current station into ISR memory (radio  
5
DXZ935  
6mode only).  
DXZ935  
DXZ935  
7
Display Items  
: DAB indication  
: Alternative frequency indication  
: Traffic announcement indication  
: Traffic programme indication  
: Programme type indication  
: Information indication  
: Mute indication  
Operation status indication  
Titles, Clock, etc. are displays.  
: Satellite indication  
: Stereo indication  
: Manual indication  
:Disc indication  
Function mode indication  
The names of modes being  
selected,etc.are displayed.  
:Scan indication  
:Repeat indication  
:Random indication  
Preset channel indication (1 to 6)  
Disc number indication (1 to 12)  
: Music mode indication  
: Matrix mode indication  
: Movie mode indication (indicate within B.B. DTS/DOLBY DIGITAL)  
: Virtual mode indication (indicate within B.B. DTS/DOLBY DIGITAL)  
: VSE indication (VSE: Virtual Space Enhancer)  
: Parametric Equalizer indication  
: Dolby Pro Logic II indication  
: DTS indication (indicate within B.B. DTS/DOLBY DIGITAL)  
LCD Screen  
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.  
The screen will recover when it returns to normal temperature.  
DXZ935  
9
5. REMOTE CONTROL  
Names of Parts  
Joystick  
wz Volume control  
ad Search  
BND (Band) button  
FNC (function)/  
POWER (power) button  
Top button  
Disc Up button  
Program button  
BND  
Functions of Remote Control Unit Buttons  
Mode  
Button  
Radio  
(DAB) (SIRIUS)  
CD/MD changer  
DVD changer  
CD  
TV  
Switches among radio, DAB, SIRIUS, CD, DVD deck, CD/MD changer, DVD changer, TV,  
and AUX.  
[FUNC]  
Plays the first track.  
Top play.  
Moves the next disc  
in increasing order.  
Switches reception  
band.  
Switches reception  
band.  
[BAND]  
Increases and decreases volume (in all modes).  
[
[
] , [  
] , [  
]
]
Moves preset  
channels up and  
down.  
Moves tracks up and down.  
When pressed and held for 1 second:  
Fast-forward/fast-backward.  
Moves preset  
channels up and  
down.  
Some of the corresponding buttons on the main unit and remote control unit have different functions.  
Loading Battery  
1. Open the battery cover.  
Battery cover  
2. Insert the supplied lithium battery (CR2032) with the plus + symbol facing up and close the battery  
cover.  
Lithium battery  
10  
DXZ935  
Loading Battery  
Notes:  
Using batteries improperly can cause them to explode. Take note of the following points:  
• Do not short-circuit, disassemble or heat batteries.  
• Do not dispose of batteries into fire or flames.  
• Dispose of spent batteries properly.  
Attaching the Remote Control Unit to the Steering Wheel  
1. Attach the holder to the steering wheel.  
The diagrams below show how to install the remote control unit on the steering wheel of a car with  
the steering wheel on the Left. Install the remote control unit on the Left in a car with the steering  
wheel on the right side.  
Attachment to a left hand drive car  
Holder  
Holder  
2. Installing the steering wheel remote control unit  
Attachment to a left hand drive car  
Attachment to a right hand drive car  
Steering wheel remote control unit  
Steering wheel remote control unit  
Holder  
Holder  
Screw with washer (2.6 5)  
Screw with washer (2.6 5)  
Attachment to a left hand drive car  
Attachment to a right hand drive car  
Align  
Steering wheel remote control unit  
Steering wheel remote control unit  
Holder  
Holder  
Clearance  
Note:  
The location to be chosen for the remote control unit depends on the configuration of the steering wheel.  
Make sure that the installation of the remote control unit does not prevent normal driving and that the remote  
control signal reaches the remote control sensor.  
DXZ935  
11  
6. DCP  
The control panel can be detached to prevent  
theft. When detaching the control panel, store it  
in the DCP (DETACHABLE CONTROL PANEL)  
case to prevent scratches.  
CAUTION  
• Always close the DUAL ACTION before remov-  
ing the DCP.  
• If you remove the DCP with the DUAL ACTION  
open, the sloping console closes immediately.  
Be careful not to get your fingers caught.  
We recommend taking the DCP with you when  
leaving the car.  
• The DCP can easily be damaged by shocks.  
After removing it, be careful not to drop it or  
subject it to strong shocks.  
Removing the DCP  
1. With the DUAL ACTION closed, turn off the  
power.  
• If the [RELEASE] button is pressed and the  
DCP is not locked into place, it may fall out  
from vibration of the car. This can break the  
DCP, so after removing it, either install it on  
the unit or put it in its DCP case.  
2. Press the [RELEASE] button deeply and  
take and pull the DCP to detach the DCP.  
• The connector connecting the unit and the  
DCP is an extremely important part. Be careful  
not to damage it by pressing on it with finger-  
nails, screwdrivers, etc.  
• If you apply to the control panel more force  
than that required with the control panel left  
open, the control panel will go down one step.  
This is due to safety mechanism engaged and  
is not a malfunction. In this case, press the [O]  
button two times to return the control panel to  
the original operating position. Using the con-  
trol panel being lowered results in a damage  
to the panel.  
Attaching the DCP  
1. Insert the DCP so that the A section on the  
right side of the DCP catches on the hook B  
on the unit.  
• Do not use the control panel being left open  
as a tray to put an object on.  
Moving the control panel manually will cause a  
malfunction such as getting out of order of the  
sloping mechanism, breakdown of the gears,  
etc. Do not draw the control panel forcibly.  
When the control panel is moved manually,  
press the [O] button several times to see if the  
control panel returns to the normal position  
and functions properly.  
2. Press the left side C of the DCP carefully to  
fit it in place.  
• Do not remove the DCP while you are driving  
a car.  
• Do not use the DCP being rickety.  
• Do not carry the DCP in a trouser pocket or  
the like directly. (The DCP may be damaged  
under load conditions.)  
• The DCP may jump out of the DCP case hous-  
ing the DCP when the case is opened ener-  
getically.  
Note:  
If the DCP is dirty, wipe off the dirt with a soft, dry  
cloth only.  
12  
DXZ935  
7. OPERATIONS  
Note:Be sure to read this chapter referring to the front diagrams of  
Basic Operations  
chapter 3. CONTROLSon page 5 (unfold).  
Adjusting the volume  
CAUTION  
Turning the [ROTARY] knob clockwise increases  
the volume; turning it counterclockwise de-  
Be sure to lower the volume before switch-  
ing off the unit power or the ignition key. The  
unit remembers its last volume setting. If you  
switch the power off with the volume up,  
when you switch the power back on, the sud-  
den loud volume may hurt your hearing and  
damage the unit.  
creases the volume.  
The volume level is from 0 (minimum) to 33 (maxi-  
mum).  
Switching the display  
Press the [DISP] button to select the desired  
display.  
Turning on/off the power  
Note:  
Be careful about using this unit for a long time  
without running the engine. If you drain the cars  
battery too far, you may not be able to start the  
engine and this can reduce the service life of the  
battery.  
Each time you press the [DISP] button, the dis-  
play switches.  
Once selected, the preferred display becomes  
the display default. When a function adjust-  
ment such as volume is made, the screen will  
momentarily switch to that function’s display,  
then revert back to the preferred display sev-  
eral seconds after the adjustment.  
1. Press the [FNC] button.  
2. The illumination and display on the unit light  
up. The unit automatically remembers its last  
operation mode and will automatically switch  
to display that mode.  
When you have entered a title in a CD/MD, it  
appears in the main display. If you have not  
entered a title, “D NO-TITLE” or “T NO-  
TITLE” appears in the title display instead. For  
information on how to enter a title, refer to the  
subsection “Entering titles” in section “Op-  
erations Common to Each Mode ”.  
3. Press and hold the [FNC] button for 1 second  
or longer to turn off the power for the unit.  
Note:  
System check  
The first time this unit is turned on after the wire  
connections are completed, it must be checked  
what equipment is connected. When the power is  
turned on, SYSTEM CHCKand Push Power”  
appear in the display alternately, so press the  
[FNC] button. The system check starts within the  
unit. When the system check is complete, the  
power is turned off, so press the [FNC] button  
again.  
Setting the clock  
1. Press and hold the [TITLE] button for 1 sec-  
ond or longer to enter ADJ mode.  
2. Press the [a] or [d] button to select the  
CLOCK”.  
3. Press the [  
] button.  
4. Press the [a] or [d] button to select the  
hour or the minute.  
5. Turn the [ROTARY] knob clockwise or coun-  
Selecting a mode  
1. Press the [FNC] button to change the opera-  
tion mode.  
terclockwise to adjust the correct time.  
The clock displayed in 12-hour format.  
6. Press the [  
memory.  
] button to store the time into  
2. Each time you press the [FNC] button, the  
operation mode changes in the following or-  
der:  
7. Press the [TITLE] button to return to the  
previous mode.  
Note:  
Radio mode DAB mode SIRIUS mode  
CD mode DVD DECK mode CD  
changer mode MD changer mode DVD  
changer mode TV mode AUX mode ➜  
Radio mode...  
You cannot set the clock when it is displayed with  
only the ignition on. If you drain or remove the  
car's battery or take out this unit, the clock is re-  
set. While setting the clock, if another button or  
operation is selected, the clock set mode is can-  
celed.  
External equipment not connected with  
CeNET is not displayed.  
DXZ935  
13  
Basic Operations  
channel (subwoofer).  
Adjusting the balance  
1. Press the [A-M] button and select BAL-  
ANCE.  
If you using Dolby Pro Logic source and your  
speaker is only four Front L.R. + Surround L.R.,  
speaker setting will be better to CTR+SW and  
CTR OFF, so Center channel divided to Front  
L.R. automatically.  
2. Turning the [ROTARY] knob clockwise em-  
phasizes the sound from the right speaker;  
turning it counterclockwise emphasizes the  
sound from the left speaker.  
Note  
When SW-L + SW-R are chosen, audio output  
from SW-L is not available in the PL II mode.  
GAC-Processor II  
The factory default setting is 0. (Adjustment  
range: L13 to R13)  
3. When the adjustment is complete, press the  
[A-M] button several times until the function  
mode is reached.  
Front L.R. + Rear L.R.+ Sub Woofer L.R. (4ch +  
2ch)  
To make the most of the sound field reproduc-  
tion of AC-Processor II, a speaker system of 4  
channel + 2 channel is recommendable.  
Adjusting the fader  
1. Press the [A-M] button and select FADER.  
1. Press and hold the [TITLE] button for 1 sec-  
2. Turning the [ROTARY] knob clockwise em-  
phasizes the sound from the front speakers;  
turning it counterclockwise emphasizes the  
sound from the rear speakers.  
ond or longer and enter ADJmode.  
2. Press the [a] or [d] button to select the  
SP-SETTING.  
3. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to select SW L+SW Ror CTR  
+SWmode.  
The factory default setting is 0. (Adjustment  
range: F12 to R12)  
3. When the adjustment is complete, press the  
[A-M] button several times until the function  
mode is reached.  
Note:  
When CTR + SW are chosen, audio output from  
CTR is not available except in the PL II mode.  
Operation BASS/TREB  
Center Speaker and Sub Woofer On / Off  
Select PLII Mode on and SP setting to  
CTR+SWmode  
1. Press the BASS/TREBmode. Each time  
the [EQ] button is pressed, the adjusting item  
BASSor TREBis changed cyclically.  
1. Press and hold the [TITLE] button for 1 sec-  
2. Turn the [ROTARY] knob clockwise or coun-  
ond or longer.  
terclockwise to adjust BAS/TREB.  
2. Press the [a] or [d] button to select the  
3. Press the [EQ] button to return to the previ-  
SP SEL.  
ous mode.  
3. Press the [  
] button to adjust the CTR-  
The Adjustment range is from 6dB to +6dB  
for bass and treb.  
SP” “SUB W.  
4. Turn the [ROTARY] knob clockwise or coun-  
This parameter is reflected STD PRO mode  
terclockwise to select ONor OFF.  
This function is useful for Speaker Setting  
Problems.  
Speaker Setting  
You can set up your favorite sound environment  
using Dolby Surround Pro logic IIor AC-  
Processor IIso that you can enjoy a dynamic  
sound of 5.1 ch surround or 4ch + 2ch speaker.  
Filter Adjustment  
1. Select Dolby Pro Logic II or AC-ProII mode  
and press and hold the [TITLE] button for 1  
second or longer.  
GDolby Pro Logic II 5.1ch surround  
Center SP +Front L.R. +Surround L.R. +Sub  
Woofer.  
2. Press the [a] or [d] button to select the  
FILTER.  
To make the most of the sound field reproduc-  
tion of Dolby Pro Logic II, a speaker system of  
5.1 channel is recommendable. It has been also  
designed so that a sound filed effect almost as  
good as that of 5.1 channel reproduction can be  
obtained even by a constitution of 4 channel + 1  
3. Press the [  
] button to adjust the SUB-W  
LPFor HPF.  
4. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to adjust filter frequency.  
14  
DXZ935  
Basic Operations  
AC-Processor II Operations  
Sub Woofer Low Pass Filter Adjustment  
Range is 50, 80, 120Hz (18dB/oct), OFF.  
Dolby Pro Logic II  
Dolby Pro Logic II is a matrix decoding technol-  
ogy in which the updated digital matrix technol-  
ogy is applied and Dolby Pro Logic is further im-  
proved. It realizes excellent 5.1 channel repro-  
duction of Dolby surround source as well as ste-  
reo sound sources such as CDs, thereby caus-  
ing a surround channel to be full-ranged (20 Hz  
to 20 kHz) and become stereo. Therefore, you  
can enjoy any stereo sources with dynamic  
sound of 5.1 channel. According to a source to  
be reproduced, Music Mode or Matrix Mode can  
be selected.  
When PLII mode Sub Woofer Low pass Filter  
Adjustment Range is 50, 80, 120Hz (12dB/  
oct.), OFF.  
High Pass Filter adjustment Range is 50, 80,  
120Hz(12dB/oct), thrgh.  
Note:  
High pass filter adjustment is available for Front  
2ch and Rear 2ch only AC-ProII PRO Mode.  
Manufactured under license from Dolby  
Laboratories. Dolby, Pro Logicand the double-  
D symbol are trademarks of Dolby Laboratories.  
G Music Mode  
This mode is suitable for stereo sources like  
CDs. By optimizing frequency characteristics of  
the surround channel, a broader and deeper  
sound is assured. In addition, since broadness  
of the sound field varies with recording condi-  
tions of music sources, there is Adjusting Mode  
which makes a finer tuning available. (cf. page  
16)  
G Matrix Mode  
This mode is suitable for AM/FM radio.  
Selection and switching of the  
Dolby Pro Logic II effect  
While the Dolby PLIIindication is lit in the dis-  
play, the Dolby PLIIeffect is set to On.  
1. Setting the speaker 5.1ch ( For detail, see the  
section Basic Operation - Speaker setting).  
2. Press the [PLII] button so that PLII mode is  
turned on. Each time the button is pressed,  
the mode changes as follows: MUSIC  
MODEMATRIX MODEPLII OFF  
MODEMUSIC MODE”  
3. Select the PLII OFF MODEto turn off the  
Dolby Pro Logic effect. Also press the [VSE]  
button or [EQ] button to turn off the Dolby  
Pro II.  
DXZ935  
15  
AC-Processor II Operations  
Distributing the center channel sound to the  
right and left will increase the integrated  
sound field image, providing you with an  
natural spatial feeling of sound.  
Adjusting Dolby Pro Logic II Operation  
1. Select Dolby Pro Logic II mode and press  
and hold the [TITLE] button for 1 second or  
longer to enter ADJmode.  
Setting to the value 0 will produce the center  
sound with the center speaker.  
2. Press the [a] or [d] button to select the  
PLII DELAY.  
Setting to the value 7 will distribute the cen-  
ter sound to the front speaker L/R as the ex-  
isting stereo sound does.  
3. Press the [  
] button to adjust the PLII  
DELAY.  
4. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to make the adjustment.  
AC-Processor II Operation  
There are 2 modes STD(standard) and PRO”  
(professional) in the AC-ProII.  
1. Setting the speaker to 4ch+2ch (For details,  
refer to the subsection Speaker Settingin  
the section Basic Operations).  
The adjustment range of surround speaker de-  
lay is from 0m sec. to 15m sec.  
The adjustment made in PLII DELAYis re-  
flected in the each mode.  
Adjusting Music Mode  
Use the MUSIC MODE to make more detailed  
adjustments.  
2. Turn off the PLII mode.  
3. Press and hold the [TITLE] button for 1 sec-  
1. Select Music Modeand press and hold the  
ond or longer and enter ADJmode.  
[TITLE] button for 1 second or longer.  
4. Press the [a] or [d] button to select the  
2. Press the [a] or [d] button to select the  
AC-PII SEL.  
PLII CONT.  
5. Press the [  
] button to select AC-ProII  
3. Press the [  
] button to adjust the PLII  
mode from STDor PRO.  
CONTdetail items.  
6. Turn the [ROTARY] knob clockwise or coun-  
4. Press the [a] or [d] button to select the  
terclockwise to select STDor PRO.  
items.  
7. Press the [TITLE] button to the previous  
5. Turn the [ROTARY] knob clockwise or coun-  
mode.  
terclockwise to make the adjustment.  
The detailed adjustments depend on each of  
the adjustment items. There are 3 items:  
PANORAMA, DIMENSION, and CTR  
WIDTH.  
Operation AC-PII STD  
1. Press the [VSE] button to enter VSE mode.  
2. Press the [BND] button to select VSE BASIC.  
PANORAMA (Y or N):  
3. Press the [DIRECT] button to select VSE  
Selecting PANORAMA mode will extend the  
front sound field image to the rear. If sur-  
round effect does not seem to be presented  
sufficiently, select the setting position Y.  
menu as below.  
1. Flat:  
original sound, flat equalizing  
2. Bass boost: deep bass sound empha-  
sized  
DIMENSION (0 to 6):  
3. High boost: middle and high sound area  
Selecting DIMENSION mode will shift the  
sound field image to the front or the rear. If  
the balance of the sound field image is too  
much pulled towards the front or rear, the  
balance front/rear can be corrected The ad-  
justing value 3 is the center position. The  
range of 3 to 0 shifts the balance front/rear to  
the front. The range of 3 to 6 shifts the bal-  
ance front/rear to the rear.  
emphasized  
4. Impact:  
low and high sound area em-  
phasized  
5. Acoustical: middle sound area empha-  
sized (human voice)  
6. Smooth:  
quiet and graceful feeling  
4. Press the [VSE] button to return to the previ-  
ous mode.  
CTR WIDTH (0 to 7):  
5. Press and hold the [VSE] button for 1 second  
or longer so that the VSE effect is turned on  
or off.  
Selecting CTR WIDTH mode will adjust the  
localization of the center channel between  
the center speaker and the front speaker L/R.  
16  
DXZ935  
AC-Processor II Operations  
5. Press and hold the [VSE] button for 1 second  
or longer so that the POSITION effect is  
turned on or off.  
Adjusting AC-PII STD  
AC-PII STD makes natural stereo feeling for ev-  
ery seat by virtual space enhancer.  
VSE, which is room simulation, can correct the  
sound pressure inside the car so that the uni-  
form sound effect is obtained at any seats.  
Adjusting AC-PII PRO  
1. Select VSEmenu which you want to edit on  
the basis of.  
1. Select VSEmenu which you want to edit on  
the basis of.  
2. Press and hold the [TITLE] button for 1 sec-  
2. Press and hold the [TITLE] button for 1 sec-  
ond or longer.  
ond or longer.  
3. Press the [a] or [d] button to select item  
3. Press the [a] or [d] button to select item  
to be adjusted.  
to be adjusted.  
There are TIME ALIGNand SP GAINavail-  
able for the items to be adjusted.  
There are DIFFUSE, CAR WIDTHand  
CAR LENGavailable for the items to be  
adjusted.  
4. Press the [  
].  
5. Press the [a] or [d] button to select the  
channel to be adjusted. Available channels  
are: FRONT-L, FRONT-R, REAR-L,  
REAR-R, SW-Land SW-R.  
DIFFUSE  
(Adjusts the correction  
deviation of broadness)  
CAR WIDTH (Adjusts the correction  
deviation of width inside  
the car)  
6. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to make the adjustment.  
The adjustment of TIME ALIGNrange is  
from 0 cm to 500cm.  
CAR LENG (Adjusts the correction  
deviation of length inside  
the car)  
The adjustment of SP-GAINrange is from  
0db to -20dB for each channel.  
4. Turn the [ROTARY] knob clockwise or coun-  
7. Press and hold the [DIRECT] buttons for 2  
seconds or longer to store the edited con-  
tents.  
terclockwise to make the adjustment.  
The adjustment range is from 1 to 10 for  
each item.  
You can give a title to user memory. For the in-  
putting method of titles, refer to the subsection  
Entering titlesin section Operations com-  
mon to each mode.  
5. Press and hold the [DIRECT] buttons for 2  
seconds or longer to store the edited con-  
tents.  
You can give a title to user memory. For the in-  
putting method of titles, refer to the subsection  
Entering titlesin section Operations com-  
mon to each mode.  
EQ Operation  
There are 2 mode for sound EQ P.EQmode  
and BASS/TREBmode selecting EQUALIZ-  
ING mode.  
Operation AC-PII PRO  
1. Press and hold the [TITLE] button for 1 sec-  
Arrival time of sound from the speaker can be  
selected from among five types according to the  
position of the seat. In addition, Time Alignment  
Function enables a pinpoint speaker setting to  
obtain a uniform sound effect from speakers to  
the listner.  
ond or longer and enter ADJmode.  
2. Press the [a] or [d] button to select the  
AC-PII SEL.  
3. Press the [  
] button to enter AC-ProII se-  
lect mode STDor PRO.  
1. Press the [VSE] button to enter POSITION mode.  
4. Then press the [a] or [d] button to select  
the EQ SEL.  
2. Press the Band button to select POS BASIC.  
5. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to select P.EQor BAS/TREB”  
mode.  
3. Press the [DIRECT] button to select VSE  
menu as below.  
1.FRONT-L, 2.FRONT-R, 3.FRONT,  
4.REAR, 5.FULL SEAT  
6. Press the [TITLE] button to return to the pre-  
vious mode.  
(Factory default setting is P.EQ)  
4. Press the [VSE] button to return to the previ-  
ous mode.  
DXZ935  
17  
AC-Processor II Operations  
Radio Operations  
Operation P.EQ  
FM reception  
®
A full range of frequency level can be minutely  
corrected with a smooth curve by frequency cor-  
rection in accordance with car models. Six kinds  
of P.EQ basic menus have been pre-stored in  
this unit according to the car models and the  
mounting positions of speakers. Thus, set it in  
accordance with the car type.  
For enhanced FM performance the  
tuner includes signal actuated stereo control,  
Enhanced Multi AGC, Impulse noise reduction  
curcuits and Multipath noise reduction circuits.  
Changing the reception area  
This unit is initially set to USA frequency intervals  
of 10kHz for AM and 200kHz for FM. When using it  
outside the USA, the frequency reception range  
can be switched to the intervals below.  
1. Press the [EQ] button to enter P.EQmode.  
2. Press the Band button to select P.EQ BA-  
SIC.  
3. Press the [DIRECT] button to select P.EQ  
GSetting the reception area  
menu as below.  
1. Press the [BND] button and select the de-  
1.SEDAN-1, 2.SEDAN-2, 3.WAGON-1,  
4.WAGON-2, 5.MINI VAN-1, 6.MINI VAN-2  
sired radio band (FM or AM).  
2. While pressing the [DISP] button, each time  
you press and hold the number 6of the [DI-  
RECT] buttons for 2 seconds or longer, the  
reception area switches from inside the USA  
to outside the USA or from outside the USA  
to inside the USA.  
4. Press the [EQ] button to return to the previ-  
ous mode.  
5. Press and hold the [EQ] button for 1 second  
or longer so that the P.EQ effect is turned on  
or off.  
Any station preset memories are lost when the  
reception area is changed.  
Adjusting P.EQ  
1. Select P.EQmenu which you want to edit  
on the basis of.  
Listening to the radio  
1. Press the [FNC] button and select the radio  
mode. The frequency or PS appears in the  
display.  
2. Press and hold the [TITLE] button for 1 sec-  
ond or longer.  
3. Press the [a] or [d] button to select item  
PS: Programme service name  
to be adjusted.  
2. Press the [BND] button and select the radio  
band. Each time the button is pressed, the ra-  
dio reception band changes in the following  
order:  
There are FRONT/REAR,BAND,FREQ”  
GAINand Qavailable for the items ad-  
justed.  
4. Press and hold the [DIRECT] buttons for 2  
seconds or longer to store the edited con-  
tents.  
FM1 FM2 FM3 AM FM1...  
3. Press the [a] or [d] button to tune in the  
desired station.  
You can give a title to user memory. For the in-  
putting method of titles, refer to the subsection  
Entering titlesin section Operations com-  
mon to each mode.  
Tuning  
There are 3 types of tuning mode available, seek  
tuning, manual tuning and preset tuning.  
The parameter created in this section is also  
effective when the unit is in both the STD”  
and PROmode.  
18  
DXZ935  
Radio Operations  
Seek tuning  
1. Press the [BND] button and select the de-  
sired band (FM or AM).  
Manual memory  
1. Select the desired station with seek tuning,  
manual tuning or preset tuning.  
If MANUis lit in the display, press and hold  
the [BND] button for 1 second or longer.  
MANUin the display goes off and seek tun-  
ing is now available.  
2. Press and hold one of the [DIRECT] buttons  
for 2 seconds or longer to store the current  
station into preset memory.  
Auto store  
2. Press the [a] or [d] button to automatically  
Auto store is a function for storing up to 6 sta-  
tions that are automatically tuned in sequentially.  
If 6 receivable stations cannot be received, a  
previously stored station remains unoverwritten  
at the memory position.  
seek a station.  
When the [d] button is pressed, the station is  
sought in the direction of higher frequencies; if  
the [a] button is pressed, the station is sought  
in the direction of lower frequencies.  
1. Press the [BND] button and select the de-  
sired band (FM or AM).  
Manual tuning  
There are 2 ways available: Quick tuning and  
step tuning.  
2. Press and hold the [SC] button for 2 seconds or  
longer. The stations with good reception are  
stored automatically to the preset channels.  
When you are in the step tuning mode, the fre-  
quency changes one step at a time. In the quick  
tuning mode, you can quickly tune the desired  
frequency.  
Preset scan  
Preset scan receives the stations stored in pre-  
set memory in order. This function is useful  
when searching for a desired station in memory.  
1. Press the [BND] button and select the de-  
sired band (FM or AM).  
1. Press the [SC] button.  
If MANUis not lit in the display, press and  
hold the [BND] button for 1 second or longer.  
MANUis lit in the display and manual tuning  
is now available.  
2. When a desired station is tuned in, press the  
[SC] button again to continue receiving that  
station.  
2. Tune into a station.  
Note:  
Be careful not to press and hold the [SC] button  
for 2 seconds or longer, otherwise the auto store  
function is engaged and the unit starts storing  
stations.  
GQuick tuning:  
Press and hold the [a] or [d] button for 1  
second or longer to tune in a station.  
GStep tuning:  
Press the [a] or [d] button to manually  
Instant station recall (ISR)  
tune in a station.  
Instant station recall is a special radio preset  
that instantly accesses a favorite radio station at  
a touch of a button. The ISR function even oper-  
ates with the unit in other modes.  
Recalling a preset station  
A total of 24 preset positions (6-FM1, 6-FM2, 6-  
FM3, 6-AM) exists to store individual radio sta-  
tions in memory. Pressing the corresponding  
[DIRECT] button recalls the stored radio fre-  
quency automatically.  
GISR memory  
1. Select the station that you wish to store in ISR  
memory.  
2. Press and hold the [ISR] button for 2 seconds  
1. Press the [BND] button and select the de-  
or longer.  
sired band (FM or AM).  
GRecalling a station with ISR  
2. Press the corresponding [DIRECT] button to  
In any mode, press the [ISR] button to turn on  
the radio function and tune the selected radio  
station. ISRappears in the display. Press the  
[ISR] button again to return to the previous  
mode.  
recall the stored station.  
Press and hold one of the [DIRECT] buttons  
for 2 seconds or longer to store that station  
into preset memory.  
DXZ935  
19  
CD Operations  
Loading a CD  
CAUTION  
1. Press the [O] button. The DUAL ACTION  
Be careful not to get your fingers caught  
when opening and closing the DUAL AC-  
TION.  
opens.  
CAUTION  
2. Remove the CD and press the [O] button to  
Be careful not to get your fingers caught  
when opening and closing the DUAL AC-  
TION.  
close the DUAL ACTION.  
Notes:  
Be sure to close the DUAL ACTION after remov-  
ing the CD.  
The DUAL ACTION closes automatically 30 sec-  
onds after removing the CD.  
If a CD (12 cm) is left in the ejected position for  
15 seconds, the CD is automatically reloaded.  
(Auto reload)  
8 cm CDs are not auto reloaded. Be sure to re-  
move it when ejected.  
2. Press the [CD EJECT] button.  
3. Insert a CD into the centre of the insertion  
slot with the label side facing up. The CD  
plays automatically after loading.  
Notes:  
Never insert foreign objects into the CD insertion  
slot.  
If the CD is not inserted easily, there may be an-  
other CD in the mechanism or the unit may re-  
quire service.  
f you force a CD into before auto reloading, this  
can damage the CD.  
When it fails in eject operation when the eject but-  
ton is pressed down, fully press the eject button  
down again. (If the eject button operation is in-  
complete, it means that the Dual Action Mecha-  
nism is suspended, so do not perform other fur-  
ther operation without releasing the Dual Action  
Mechanism stopped midway.)  
Discs not bearing the  
or  
mark and  
CD-ROMs cannot be played by this unit.  
Loading 8 cm compact discs  
No adapter is required to play an 8 cm CD.  
Insert the 8 cm CD into the centre of the inser-  
tion slot.  
Selecting a track  
4. After loading a CD, the DUAL ACTION  
closes automatically.  
Notes:  
GTrack-up  
1. Press the [d] button to move ahead to the  
beginning of the next track.  
Note that DUAL ACTION closes immediately after  
a CD is inserted into CD insertion slot.  
If no CD is loaded in the DUAL ACTION, it closes  
2. Each time you press the [d] button, the  
track advances ahead to the beginning of the  
next track.  
after 30 seconds.  
GTrack-down  
1. Press the [a] button to move back to the  
Listening to a CD already inserted  
Press the [FNC] button to select the CD mode.  
Play starts automatically. If no CD is loaded in  
the unit, NO DISCappears in the display.  
beginning of the current track.  
2. Press the [a] button twice to move to the  
beginning of the previous track.  
Fast-forward/fast-backward  
GFast-forward  
Pausing play  
1. Press the [  
] button to pause play.  
PAUSEappears in the display.  
Press and hold the [d] button for 1 second or  
longer.  
2. To resume CD play, press the [  
again.  
] button  
GFast-backward  
Press and hold the [a] button for 1 second or  
longer.  
Ejecting a CD  
1. Press the [O] button. The DUAL ACTION  
opens. Press the [CD EJECT] button to eject  
a CD. EJECTappears in the display.  
20  
DXZ935  
CD Operations  
Top function  
Operations Common to  
Each Mode  
The top function resets the CD player to the first  
track of the disc. Press the [BND] button to play  
the first track (track No. 1) on the disc.  
Entering titlesDISC or STATION  
TITLE  
Titles up to 10 characters long can be stored in  
memory and displayed for CD, CD changer and  
TV stations. The number of titles that can be en-  
tered for each mode are as follows.  
Scan play  
The scan play locates and plays the first 10 sec-  
onds of each track on a disc automatically. This  
function continues on the disc until it is cancelled.  
The scan play is useful when you want to select a  
desired track.  
Mode  
CD mode  
TV mode  
Number of titles  
50 titles  
15 titles  
1. Press the [SC] button to start scan play. SCN”  
lights in the display.  
CD changer mode  
CDC655z connected  
CDC655Tz connected  
CDC1255z connected  
Number of titles  
60 titles  
2. To cancel the scan play, press the [SC] but-  
ton again. SCNgoes off from the display  
and the current track continues to play.  
100 titles  
50 titles  
Repeat play  
The repeat play continuously plays the current  
track. This function continues automatically until  
it is cancelled.  
1. Press the [FNC] button to select the mode  
you want to enter a title (CD, CD changer or  
TV).  
2. Select and play a CD in the CD changer or  
tune in to a TV station for which you want to  
enter the title.  
1. Press the [RP] button. RPTlights in the dis-  
play and the current track is repeated.  
2. To cancel the repeat play, press the [RP] but-  
ton again. RPTgoes off from the display and  
normal play resumes.  
3. Press the [DISP] button and display the  
main.  
4. Press the [TITLE] button. TITLappears in  
the display and the cursor position flashes.  
Random play  
The random play selects and plays individual tracks  
on a disc in no particular order. This function con-  
tinues automatically until it is cancelled.  
5. Press the [a] or [d] button to move the  
cursor.  
6. Press the [DISP] button to select a character.  
Each time you press the [DISP] button, the  
character changes in the following order:  
1. Press the [RD] button. RDMlights in the dis-  
play, an individual track is selected randomly  
and play begins.  
Capital letters Small letters Numbers  
and Symbols Umlaut Capital letters...  
2. To cancel the random play, press the [RD] but-  
ton again. RDMgoes off and normal play  
resumes.  
7. Turn the [ROTARY] knob to select the de-  
sired character. Turning the [ROTARY] knob  
clockwise moves the cursor to the next char-  
acter; turning it counterclockwise moves the  
cursor to the previous character.  
8. Repeat steps 5 to 7 to enter up to 10 charac-  
ters for the title.  
9. Press and hold the [  
] button for 2 sec-  
onds or longer to store the title into memory  
and cancel title input mode.  
DXZ935  
21  
Operations Common to Each Mode  
4. Press the [TITLE] button to return to the pre-  
Entering titlesAdjusted Effect  
items title  
You can give a title to the user memory of the  
AC-PII VSE POSITION and P.EQ that you have  
adjusted.  
vious mode.  
Adjustment range is off to LV5.  
Factory default setting is LV3.  
Contrast  
1. Press the [TITLE] button for 1 second or  
longer to enter ADJ mode.  
1. Select the adjustment mode in which you  
want to give a title.  
2. Press the [BND] button to select the user  
2. Press the [a] or [d] button to select the  
preset side.  
CONTRAST.  
3. Press one of the [DIRECT] buttons to select  
the use memory to which you want to give a  
title.  
3. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to adjust Contrast level.  
4. Press the [TITLE] button to return to the pre-  
4. Press the [TITLE] button.  
vious mode.  
Adjustment range is LV1 to LV18  
Factory default setting is LV18.  
5. Press the [a] or [d] button to move the  
cursor.  
6. Press the [DISP] button to select the charac-  
ter. Each time you press the [DISP] button,  
the character changes in the following order:  
Capital letters Small letters Numbers  
and Symbols Umlaut Capital letter…  
Key Illumi  
1. Press the [TITLE] button for 1 second or  
longer to enter ADJ mode.  
2. Press the [a] or [d] button to select the  
7. Turn the [ROTARY] knob clockwise or coun-  
KEY ILLUMI.  
terclockwise to adjust desired character.  
3. Turn the [ROTARY] knob clockwise or coun-  
8. Repeat steps 5 to 7 to enter up to 10 charac-  
ters for the title.  
terclockwise to select Key illumi color.  
4. Press the [TITLE] button to return to the pre-  
9. Press and hold the the [  
] button for 2  
vious mode.  
Selectable color is Green or Red.  
second or longer to store the title into  
memory and cancel title input mode.  
Factory default setting is Green.  
Clearing titles  
Message display  
1. Select and play a CD in the CD changer or  
tune in to a TV station for which you want to  
clear the title.  
When the unit is powered on or off, a message  
is displayed. The user can turn this message  
display ON or OFF.  
2. Press the [DISP] button and display the  
The factory default setting is ON.  
main.  
1. Press and hold the [TITLE] button for 1 sec-  
ond or longer to switch to the adjustment se-  
lection display.  
3. Press the [TITLE] button. TITLappears in  
the display and the display switches to the  
title input display.  
2. Press the [a] or [d] button to select MES-  
4. Press the [BND] button.  
SAGE.  
5. Press and hold the [  
] button for 2 sec-  
3. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to set the message display ON  
or OFF.  
onds or longer to clear the title and cancel  
title input mode.  
4. Press the [TITLE] button to return to the pre-  
vious mode.  
Dimmer Level  
1. Press the [TITLE] button for 1 second or  
longer to enter ADJ mode.  
2. Press the [a] or [d] button to select the  
DIMMER LV.  
3. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to adjust Dimmer level.  
22  
DXZ935  
Operations Common to Each Mode  
4. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to select AUTO SS type or  
AUTO SS off.  
Beep  
1. Press the [TITLE] button for 1 second or  
longer to enter ADJ mode.  
5. Press the [TITLE] button to return to the pre-  
2. Press the [a] or [d] button to select the  
vious mode.  
BEEP.  
SS type are SS OFF, SS PTN1, SS PTN2,  
SS PTN3, SS RANDOM  
3. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to switch Beep on or Beep off.  
4. Press the [TITLE] button to return to the pre-  
Displaying titles  
This unit can display title data and user title data  
input with this unit.  
vious mode.  
Factory default setting is Beep on.  
1. Press the [DISP] button to display the title.  
AUX function  
This system has an external RCA input so you  
can listen to sounds and music from external  
devices connected to this unit.  
2. Each time you press and hold the [DISP] but-  
ton for 1 second or longer, the title display  
changes.  
Note:  
The contents of the title to be displayed depend on  
a disc to be played.  
If a disc with no title or user title input is played,  
NO-TITLE appears in the display.  
Selecting AUX IN sensitivity  
Make the following settings to select the sensi-  
tivity when sounds from external devices con-  
nected to this unit are difficult to hear even after  
adjusting the volume.  
Setting the method for title scroll  
Set how to scroll in CD-TEXT or MD.  
The factory default setting is ON.  
The factory default setting is SENS LOW.  
1. Press and hold the [TITLE] button for 1 sec-  
ond or longer to set the Adjust mode.  
1. Press and hold the [TITLE] button for 1 sec-  
2. Press the [a] or [d] button and select  
ond or longer to set the Adjust mode.  
AUX SENS.  
2. Press the [a] or [d] button and select  
3. Turn the [ROTARY] knob clockwise or coun-  
terclockwise as needed and select from  
AUTO SCROLL.  
3. Turn the [ROTARY] knob clockwise or coun-  
SENS HIGH, SENS MIDor SENS LOW.  
terclockwise and select ONor OFF.  
4. Press the [TITLE] button to return to the pre-  
G SCROLL ON”  
vious mode.  
To scroll automatically.  
G SCROLL OFF”  
Screen saver function  
This unit is provided with the screen saver func-  
tion which allows you to show various kinds of  
patterns and characters in the Operation Status  
indication area of the display. You can turn on  
and off this function.  
To scroll just 1 time when the title was  
changed or the title key was pressed.  
4. Press the [TITLE] button to return to the pre-  
vious mode.  
If the button operation is performed with the  
screen saver function on, the operation display  
corresponding to the button operation is shown  
for about 30 seconds and the display returns to  
the screen saver display.  
The factory default setting is RANDOM.  
1. Press the [TITLE] button for 1 second or  
longer to enter ADJ mode.  
2. Press the [a] or [d] button to select the  
AUTO SS.  
3. Press [  
mode.  
] to enter the AUTO SS ADJ  
DXZ935  
23  
8. OPERATIONS OF ACCESSORIES  
CD/MD/DVD Changer Operations  
2. Each time you press the [d] button, the  
track advances ahead to the beginning of the  
next track.  
CD/MD/DVD changer functions  
When an optional CD/MD/DVD changer is con-  
nected through the CeNET cable, this unit con-  
trols all changer functions. This unit can control  
a total of 2 changers (MD or CD or DVD).  
GTrack-down  
1. Press the [a] button to move back to the  
beginning of the current track.  
Press the [FNC] button and select the CD/MD/  
DVD changer mode to start play. If 2 changers  
are connected, press the [FNC] button to select  
the changer for play.  
2. Press the [a] button twice to move to the  
beginning of the previous track.  
If NO MAGAZINEappears in the display, insert  
the magazine into the changer. LOADINGappears  
in the display while the player loads (checks) the  
magazine.  
Fast-forward/fast-backward  
GFast-forward  
Press and hold the [d] button for 1 second or  
If NO DISCappears in the display, eject the maga-  
zine and insert discs into each slot. Then, reinsert  
the magazine back into the changer.  
longer.  
GFast-backward  
Press and hold the [a] button for 1 second or  
longer.  
CAUTION  
CD-ROM discs and CD-R discs cannot be  
played in the CD changer.  
Top function  
The top function plays from the first track or  
chapter of the disc.  
Pausing play  
1. Press the [  
GWhen playing a disc 1 to 6  
] button to pause play.  
Press the [DIRECT] button (1 to 6) with the  
same number as the DISC playing.  
PAUSEappears in the display.  
2. To resume play, press the [  
] button again.  
GWhen playing a disc 7 to 12 (only when a  
12 disc CD changer is used.)  
Press and hold for 1 second or longer the [DI-  
RECT] button (1 to 6) with the same number as  
the DISC playing.  
If a DISC is not loaded in a slot of magazine, press-  
ing the [DIRECT] button corresponding to its disc  
number is invalid.  
Selecting a DISC  
Each [DIRECT] button corresponds to a disc  
loaded into the magazine.  
GSelecting a disc from 1 to 6  
Press the corresponding [DIRECT] button (1 to  
6) to select the desired disc.  
GSelecting a disc from 7 to 12 (only when a  
12 disc CD changer is used.)  
Scan play  
Scan play locates and plays the first 10 seconds  
of each track on a disc automatically. This func-  
tion continues on the disc until it is cancelled.  
Press and hold the [DIRECT] button (1 to 6) for  
1 second or longer to select the desired disc.  
If a DISC is not loaded in a slot of magazine, press-  
ing the [DIRECT] button corresponding to its disc  
number is invalid.  
The scan play is useful when you want to select a  
desired track.  
1. Press the [SC] button to start track scanning.  
SCNlights in the display.  
Selecting a track  
2. To cancel the scan play, press the [SC] but-  
ton again. SCNgoes off from the display  
and the current track continues to play.  
GTrack-up  
1. Press the [d] button to move ahead to the  
beginning of the next track.  
24  
DXZ935  
CD/MD/DVD Changer Operations  
Disc scan play  
Disc random play  
Disc scan play locates and plays the first 10  
seconds of the first track on each disc in the cur-  
rently selected DISC changer. This function con-  
tinues automatically until it is cancelled.  
The disc random play selects and plays indi-  
vidual tracks or discs automatically in no par-  
ticular order. This function continues automati-  
cally until it is cancelled.  
Disc scan play is useful when you want to select a  
1. Press and hold the [RD] button for 1 second  
or longer. DISCand RDMlight in the dis-  
play and disc random play starts.  
desired DISC .  
1. Press and hold the [SC] button for 1 second  
or longer. DISCand SCNlight in the dis-  
play and disc scan play starts.  
2. To cancel disc random play, press and hold  
the [RD] button again. DISCand RDMgo  
off from the display and normal play resumes  
from the current track.  
2. To cancel disc scan play, press the [SC] but-  
ton again. DISCand SCNgo off from the  
display and the current track continues to  
play.  
Repeat play  
Repeat play continuously plays the current track.  
This function continues automatically until it is  
cancelled.  
1. Press the [RP] button. RPTlights in the dis-  
play and the current track is repeated.  
2. To cancel repeat play, press the [RP] button  
again. RPTgoes off from the display and  
normal play resumes.  
Disc repeat play  
After all the tracks on the current disc have been  
played, disc repeat play automatically replays  
the current disc over from the first track. This  
function continues automatically until it is can-  
celled.  
1. Press and hold the [RP] button for 1 second  
or longer. DISCand RPTlight in the dis-  
play and disc repeat play starts.  
2. To cancel disc repeat play, press and hold  
the [RP] button again. DISCand RPTgo  
off from the display and normal play resumes  
on the current track.  
Random play  
Random play selects and plays individual tracks  
on the disc in no particular order. This function  
continues automatically until it is cancelled.  
1. Press the [RD] button. RDMlights in the  
display and random play begins.  
2. To cancel random play, press the [RD] button  
again. RDMgoes off from the display and  
normal play resumes.  
DXZ935  
25  
TV Operations  
TV tuner functions  
Manual tuning  
When an optional TV tuner is connected through  
the CeNET cable, this unit controls all TV tuner  
functions. To watch TV requires a TV tuner and  
monitor.  
There are 2 ways available: Quick tuning and  
step tuning.  
When you are in the step tuning mode, the fre-  
quency changes one step at a time. In the quick  
tuning mode, you can quickly tune the desired  
frequency.  
Watching a TV  
1. Press the [FNC] button and select the TV  
1. Press the [BND] button and select the de-  
sired band (TV1 or TV2).  
mode.  
If MANUis not lit in the display, press and  
hold the [BND] button for 1 second or longer.  
MANUlights in the display and manual tun-  
ing is now available.  
2. Press the [BND] button to select the desired  
TV band (TV1 or TV2). Each time the button  
is pressed, the input selection toggles be-  
tween TV1 and TV2.  
2. Tune into a station.  
3. Press the [a] or [d] button to tune in the  
GQuick tuning:  
desired TV station.  
Press and hold the [a] or [d] button for 1  
second or longer to tune in a station.  
Watching a video  
GStep tuning:  
The TV tuner has a VTR input terminal to which  
1 external device can be connected. Connect a  
12 V video cassette player (VCP) or video cas-  
sette recorder (VCR) to the TV tuner input termi-  
nal.  
Press the [a] or [d] button to manually  
tune in a station.  
Recalling a preset station  
A total of 12 TV stations can be stored (6-TV1  
and 6-TV2). This allows you to select your favor-  
ite TV stations and store them in memory for  
later recall.  
1. Press the [RD] button to select VTR.  
2. To return to the TV broadcast, press the [RD]  
button.  
1. Press the [BND] button and select the de-  
Tuning  
sired TV band (TV1 or TV2).  
There are 3 types of tuning mode available,  
Seek tuning, manual tuning and preset tuning.  
2. To recall a stored TV station, press the de-  
sired [DIRECT] button to select that station.  
Press and hold one of the [DIRECT] buttons  
for 2 seconds or longer to store the current  
station into preset memory.  
Seek tuning  
1. Press the [BND] button and select the de-  
sired TV band (TV1 or TV2).  
If MANUis lit in the display, press and hold  
the [BND] button for 1 second or longer.  
MANUin the display goes off and seek tun-  
ing is now available.  
Manual memory  
1. Select the desired station with seek tuning,  
manual tuning or preset tuning.  
2. Press and hold one of [DIRECT] buttons for  
2 seconds or longer to store the current sta-  
tion into preset memory.  
2. Press the [a] or [d] button to automatically  
seek a station.  
Press the [d] button to automatically tune  
up the frequency band to the next available  
TV station; press the [a] button to automati-  
cally tune down.  
Auto store  
Auto store selects 6 TV stations automatically  
and stores each one into preset memory.  
If there are not 6 stations with good reception,  
stations previously stored in memory remain  
and only the strong stations are stored into  
memory.  
26  
DXZ935  
TV Operations  
Digital Radio / DAB Operations  
DAB control function  
1. Press the [BND] button and select the de-  
sired TV band (TV1 or TV2).  
When a CeNET cable is used to connect a DAB  
(DAH913) (sold separetely), all functions can be  
operated.  
2. Press and hold the [SC] button for 2 seconds  
or longer. The stations with good reception  
are stored automatically to the preset chan-  
nels.  
Listening to the DAB station  
1. Press the [FNC] button to select the DAB  
mode.  
Preset scan  
Preset scan allows the user to view each preset  
position before it automatically advances to the  
next preset. This function is useful for searching  
for a desired TV station in memory.  
2. When the unit receives a DAB station, the  
display changes in the following order:  
Frequency channel service label  
1. Press the [SC] button.  
Switching displays  
2. When the desired station is found, press the  
[SC] button again to remain tuned to that sta-  
tion.  
Press the [DISP] button for 1 second during the  
Main (service label) display to select Main (ser-  
vice label) or Sub (PTY).  
Note:  
Notes:  
Do not press and hold the [SC] button for 2 sec-  
onds or longer. Doing so will trigger the auto store  
function and start storing stations into memory.  
The display shown in the normal reception mode  
and the preset reception mode is the same when  
a DAB station is received.  
The number of programmes and broadcasting  
times depend on the DAB stations.  
When the strength of DAB signals is weak, audio  
output is muted.  
Setting the TV diver  
You can change the reception setting for the TV  
antenna connected to the TV tuner.  
1. Press and hold the [TITLE] button for 1 second or  
Seek tuning  
longer to switch to the adjustment selection display.  
1. Press the [FNC] button to select the DAB mode.  
2. Press the [a] or [d] button to select TV  
DIVER.  
2. Press and hold the [a] or [d] button for 1  
second or longer.  
3. Turn the [ROTARY] knob clockwise to set to  
SEARCHINGappears in the display.  
ONor counterclockwise to set to OFF.  
3. DABlights up in the display when the main  
G DIVER ON”  
unit receives a DAB station.  
Sets reception emphasizing the visual.  
G DIVER OFF”  
* The main unit stops the seek tuning when it  
cannot find a DAB station. The display returns  
to the previous mode.  
Sets the diver setting to OFF.  
4. Press the [TITLE] button to return to the pre-  
vious mode.  
Manual tuning  
1. Press the [FNC] button to the select the DAB  
mode.  
2. Press and hold the [BND] button for 1 second  
or longer. MANUlights up in the display.  
3. Press the [a] or [d] button to select a sta-  
tion.  
If no operation is performed for more than 7  
seconds, manual tuning is cancelled and the  
display returns to the previous mode.  
DXZ935  
27  
Digital Radio / DAB Operations  
Note:  
Switching programmes  
Press and hold the [DIRECT] button for 2 sec-  
onds or longer to store the programme currently  
being received. (Manual memory)  
1. Press the [FNC] button to receive a DAB station.  
2. Press the [a] or [d] button to switch  
programmes in the DAB station.  
Note:  
AF function  
The programme name may be the same depend-  
ing on DAB programmes.  
The AF function switches to a different fre-  
quency on the same network in order to main-  
tain optimum reception.  
Programme scan  
The factory default setting is ON”  
G Switching OFF the AF function  
This function scans through each receivable  
programme in a DAB station being received for  
10 seconds sequentially. This is useful when you  
want to search for a desired programme.  
Press the [RP] button. AFin the display goes  
off and the AF function turns off.  
G Switching ON the AF function  
1. Press the [FNC] button to receive a DAB station.  
Press the [RP] button. AFin the display lights  
and the AF function turns on.  
2. Perform the following operation depending  
on the connected model.  
If the reception of the current broadcast station dete-  
riorates, SEARCHING SAME STATION” “SEARCH”  
appears in the display and the radio searches for the  
same programme on another frequency.  
Press the [SC] button. SERVICE SCNlights  
up and the unit starts scanning each  
programme for 10 seconds sequentially.  
Each time the main unit scans, the  
programme name is shown in the display.  
INFO (Announcement)  
3. To stop programme scan when a desired  
programme is tuned in.  
In the INFO standby mode, when the selected  
announcement programme starts, the main unit  
switches to the selected announcement  
programme automatically.  
Press the [SC] button.  
Manual memory  
The main unit has a manual memory function for  
DAB programmes. Up to 18 programmes (6  
programmes each) can be preset in the preset  
buttons.  
GSetting the INFO standby mode  
If you press and hold the [ISR] button for 1 sec-  
ond or longer, INFOlights in the display and  
the main unit is set into the INFO standby mode  
until the selected announcement is broadcast.  
When the selected announcement broadcast  
starts, the announcement item appears in the  
display. If you press and hold the [ISR] button for  
1 second or longer while the selected an-  
nouncement broadcast is being received, the  
selected announcement broadcast reception is  
cancelled and the main unit goes into the INFO  
standby mode.  
[M1], [M2] and [M3]  
1. Press the [FNC] button to select DAB mode.  
2. Press the [BND] button to select any one  
shown above.  
3. Press the [a] or [d] button to select a de-  
sired programme.  
4. Press and hold one of the [DIRECT] buttons  
(1 to 6) for 2 seconds or longer to store the  
programme.  
GCancelling INFO standby mode  
Note:  
To cancel the INFO standby mode, press and  
hold the [ISR] button for 1 second or longer.  
The interrupt programme (PTY or INFO) cannot  
be written into a manual memory.  
GInformation select  
This is a function for selecting INFORMATION  
ON or OFF in the Information interrupt mode.  
Recalling a preset programme  
1. Press the [FNC] button to select the DAB mode.  
You can set ON up to 6 information items.  
You can select any of the 6 items below:  
2. Press the [BND] button. Each time you press  
the [BND] button, the display changes in the  
following order:  
[M1] [M2] [M3] [M1]...  
3. Press one of the [DIRECT] buttons to recall a  
preset programme.  
28  
DXZ935  
Digital Radio / DAB Operations  
G Setting TA standby mode  
INFORMATION item  
If you press the [ISR] button when only TPis lit  
in the display, TPand TAlight in the display  
and the unit is set into TA standby mode until a  
traffic announcement is broadcast. When a traf-  
fic announcement broadcast starts, TRA INFO”  
appears in the display. If you press the [ISR] but-  
ton while a traffic announcement broadcast is  
being received, the traffic announcement broad-  
cast reception is cancelled and the unit goes  
into TA standby mode.  
ENGLISH  
TRAVEL  
WARNING  
NEWS  
Contents  
Transport flash  
Warning / Service  
News flash  
WEATHER  
EVENT  
Area weather flash  
Event announcement  
Special event  
SPECIAL  
1. Perform the following operation depending  
on the connected model.  
G Cancelling TA standby mode  
With TPand TAlit in the display, press the  
[ISR] button. The TAin the display goes off and  
TA standby mode is cancelled.  
If TPis not lit, pressing [ISR] button searches for  
a TP station.  
Press and hold the [TITLE] button for 1 second or  
longer.  
2. Press the [a] or [d] button to select INFO  
SEL, then press the [  
INFO SELmode.  
] button to enter  
G Searching for a TP station  
3. Press the [a] or [d] button to select an in-  
When TPis not lit, if you press the [ISR] but-  
ton, TAin the display lights and the unit auto-  
matically receives a TP station.  
formation item. You can select any of 6 items:  
4. Perform the following operation depending  
on the connected model.  
Note:  
Turn the [ROTARY] knob clockwise or  
counterclock wise to set the information item  
for ON or OFF.  
If a TP station is not received, the unit continues  
the search operation. Pressing the [ISR] button  
again goes off TAin the display and stops TP  
station searching.  
5. Press the [TITLE] button to return to the pre-  
vious display.  
Auto store function for TP stations  
You can automatically store up to 6 TP stations  
into preset memory. If the number of TP that can  
be received is less than 6, broadcast stations al-  
ready stored in memory are left without being  
overwritten.  
Switching the PTY display language  
You can select one of 2 languages (English or  
French) for the PTY displayed in the display.  
The factory default setting is ENGLISH.  
1. Press and hold the [TITLE] button for 1 sec-  
ond or longer to switch to the adjustment se-  
lection display.  
With TAlit in the display, press and hold the  
[SC] button for 2 seconds or longer. The TP sta-  
tions with the good reception sensitivity are  
stored into preset memory.  
Even if you select FM1 or FM2, a TP station is stored  
into memory for FM3.  
2. Press the [a] or [d] button and select  
LANGUAGE.  
3. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to select the desired language.  
4. Press the [TITLE] button to return to the pre-  
vious mode.  
TA (Traffic Announcement)  
In the TA standby mode, when a traffic announce-  
ment broadcast starts, the traffic announcement  
broadcast is received as top priority regardless of  
the function mode. Traffic programme (TP) auto-  
matic tuning is also possible.  
This function can only be used when TPis lit in  
the display. When TPis lit, this means that the  
DAB broadcast station being received has traffic  
announcement programmes.  
DXZ935  
29  
Digital Radio / DAB Operations  
PTY  
Selecting PTY  
This function enables you to listen to the se-  
lected programme type, irrespective of the func-  
tion mode.  
1. When you press the [RD] button, the unit  
goes into PTY select mode.  
2. Press any one of the [DIRECT] buttons. Al-  
ternatively, turn the [ROTARY] knob clock-  
wise or counterclockwise to select the de-  
sired PTY.  
PTY broadcasts are not yet available in all countries.  
In the INFO standby mode, INFO stations have pri-  
ority over PTY stations.  
In the TA standby mode, TP stations have priority  
over PTY stations.  
Below are the factory default settings stored  
for the [DIRECT] buttons.  
PTY item  
PTY item  
Preset  
number  
ENGLISH  
NEWS  
Contents  
News  
ENGLISH Contents  
1
2
3
4
5
6
NEWS  
News  
INFORM  
SPORTS  
TALK  
Information  
Sports  
TOP 40  
Top 40  
COUNTRY Country music  
SOFT Soft music  
CLASSICL Classical  
R & B Rhythm and Blues  
Talk  
ROCK  
Rock  
CLS ROCK  
ADLT HIT  
SOFT RCK  
TOP 40  
Classic Rock  
Adult Hits  
Soft Rock  
Top 40  
3. The PTY select mode is cancelled automati-  
cally 7 seconds after a PTY is selected.  
COUNTRY  
OLDIES  
SOFT  
Country music  
Oldies  
PTY seek  
1. When you press the [RD] button, the PTY se-  
lect mode is turned on.  
Soft music  
2. Select PTY.  
NOSTALGA Nostalgia  
3. Press the [a] or [d] button. If you press  
the [d] button, the unit seeks a PTY broad-  
cast moving up the frequencies; if you press  
the [a] button, it seeks moving down the  
frequencies.  
JAZZ  
Jazz  
CLASSICL  
R & B  
Classical  
Rhythm and Blues  
Soft Rhythm and Blues  
SOFT R&B  
LANGUAGE Language  
If no station with the selected PTY broadcast  
can be received, the unit returns to PTY select  
mode.  
REL MUSC  
REL TALK  
PERSNLTY  
PUBLIC  
Religious music  
Religious talk  
Personality  
Public  
PTY preset memory  
1. When you press the [RD] button, the PTY se-  
lect mode is turned on.  
G Setting PTY standby mode  
When you press the [RD] button, PTYlights in  
the display and the PTY standby mode is turned  
on. When the selected PTY broadcast starts, the  
PTY item name appears in the display.  
2. Turn the [ROTARY] knob clockwise or coun-  
terclockwise to select the desired PTY.  
3. If you press and hold any one of the [DI-  
RECT] buttons for 2 seconds or longer, the  
selected PTY is stored into that preset chan-  
nel memory.  
G Cancelling PTY standby mode  
When you press and hold the [RD] button for 1  
second or longer, PTYgoes off in the display  
and PTY standby mode is cancelled.  
Emergency broadcast  
G Cancelling a PTY interrupt broadcast  
When an emergency broadcast is received, all  
the function mode operations are stopped.  
ALARMappears in the display and the emer-  
gency broadcast can be heard.  
Press the [RD] button during the PTY interrupt  
broadcast, the PTY interrupt is cancelled and  
the unit returns to PTY standby mode.  
30  
DXZ935  
Digital Radio / DAB Operations  
DVD DECK Operations  
G Cancelling an emergency broadcast  
Operation  
GPlay/Still operation  
If you press [RP] button, emergency broadcast  
reception is cancelled.  
Press the [  
] button to select the desired  
mode (play, still (pause)).  
Volume setting of TA, INFO,  
emergency broadcast (ALARM) and  
PTY  
The volume for TA, INFO, ALARM and PTY in-  
terrupts can be set during TA, INFO, ALARM  
and PTY interrupt. Perform the following opera-  
tion depending on the connected model.  
Each time the button is pressed, the mode  
changes cyclically.  
GChapter up/down operation (FF/FB opera-  
tion)  
Press the [d] button for 1 second or shorter to  
increment chapters.  
Hold down the [d] button for 1 second or longer  
The factory default setting is 15.  
to fast forward.  
During a TA, INFO, ALARM or PTY interrupt,  
turn the [ROTARY] knob clockwise or counter-  
clockwise to set the volume to a desired level (0  
to 33).  
Press the [a] button for 1 second or shorter to  
decrement chapters.  
Hold down the [a] button for 1 second or longer  
to fast backward.  
When the TA, INFO,ALARM or PTY interrupt ends,  
the volume returns to the level it had before the in-  
terrupt.  
DXZ935  
31  
9. IN CASE OF DIFFICULTY  
Problem  
Cause  
Measure  
Power does not turn  
on.  
(No sound is pro-  
duced.)  
Fuse is blown.  
Replace with a fuse of the same amperage. If  
the fuse blows again, consult your store of pur-  
chase.  
Incorrect wiring.  
Consult your store of purchase.  
No sound output  
Power antenna lead is shor- 1. Turn the unit off.  
ted to ground or excessive  
when operating the  
2. Remove all wires attached to the power anten-  
unit with amplifiers or current is required for  
power antenna  
attached.  
na lead. Check each wire for a possible short  
to ground using an ohm meter.  
remote-on the amplifiers or  
power antenna.  
3. Turn the unit back on.  
4. Reconnect each amplifier remote wire to the  
power antenna lead one by one. If the amplifi-  
ers turn off before all wires are attached, use  
an external relay to provide remote-on voltage  
(excessive current required).  
Nothing happens  
when buttons are  
pressed.  
The microprocessor has  
Turn off the power, then  
Reset button  
malfunctioned due to noise, press the [RELEASE]  
etc.  
button and remove the  
DCP.  
Press the reset button  
with a thin rod.  
Display is not accu-  
rate.  
DCP or main unit connec-  
tors are dirty.  
Wipe the dirt off with a soft cloth moistened with  
cleaning alcohol.  
Compact disc cannot Another compact disc is  
be loaded. already loaded.  
Eject the compact disc before loading the new  
one.  
Sound skips or is noi- Compact disc is dirty.  
Clean the compact disc with a soft cloth.  
sy.  
Compact disc is heavily  
scratched or warped.  
Replace with a compact disc with no scratches.  
Sound is bad directly Water droplets may form on Let dry for about 1 hour with the power on.  
after power is turned the internal lens when the  
on.  
car is parked in a humid  
place.  
Poor sound quality  
The equalizer levels are too If the equalizer levels are too high, the sound  
high.  
may distort. Lower the equalizer levels.  
32  
DXZ935  
10. ERROR DISPLAYS  
If an error occurs, one of the following displays is displayed.  
Take the measures described below to eliminate the problem.  
Error Display  
ERROR 2  
Cause  
Measure  
A CD is caught inside the CD deck and is  
not ejected.  
This is a failure of CD decks mechanism and  
consult your store of purchase.  
ERROR 3  
A CD cannot be played due to scratches,  
etc.  
Replace with a non-scratched,  
non-warped-disc.  
A CD cannot be played due to pick up fail-  
ure.  
Consult your store of purchase.  
ERROR 6  
ERROR 2  
ERROR 3  
A CD is loaded upside-down inside the CD  
deck and does not play.  
Eject the disc then reload it properly.  
A CD inside the CD changer is not loaded.  
This is a failure of CD changers mechanism  
and consult your store of purchase.  
A CD inside the CD changer cannot be  
played due to scratches, etc.  
Replace with a non-scratched, non-warped  
disc.  
A CD cannot be played due to pick up fail-  
ure.  
Consult your store of purchase.  
ERROR 6  
ERROR H  
A CD inside the CD changer cannot be  
played because it is loaded upside-down.  
Eject the disc then reload it properly.  
Displayed when the temperature in the MD  
changer is too high and playback has been  
stopped automatically.  
Lower the surrounding temperature and wait  
for a while to cool off MD changer.  
ERROR 2  
ERROR 3  
ERROR 6  
An MD inside the MD changer is not loaded. This is a failure of MD changers mechanism  
and consult your store of purchase.  
An MD inside the MD changer cannot be  
played due to scratches, etc.  
Replace with a non-scratched, non-warped  
disc.  
An MD inside the MD changer cannot be  
played because it is loaded upside-down.  
Eject the disc then reload it properly.  
Displayed when a non-recorded MD is  
loaded in the MD changer.  
Load a pre-recorded MD in the MD changer.  
DXZ935  
33  
Error Display  
ERROR 2  
Cause  
Measure  
A DISC inside the DVD changer cannot be  
played.  
This is a failure of dvd mechanism and con-  
sult your store of purchase.  
ERROR 3  
ERROR 6  
A DISC cannot be played due to scratches,  
etc.  
Retry or replace with a non-scratched, non-  
warped-disc.  
A DISC inside the DVD changer cannot be  
played because it is loaded upside-down.  
Eject the disc then reload it properly  
Set the correct Parental level.  
ERROR P  
ERROR R  
Parental level error  
Region code error  
Eject the disc and replace correct region  
code disc.  
If an error display other than the ones described above appears, press the reset button. If the problem  
persists, turn off the power and consult your store of purchase.  
34  
DXZ935  

Nokia 3200 User Manual
Motorola V60p User Manual
Motorola T225 User Manual
JVC KD SC607 User Manual
Intel Chipper 945G User Manual
Freecom Technologies Hard Drive Dock Duplicator User Manual
Eton SOUND101 User Manual
Centon electronic DataStick Designer DSD4GB 005 User Manual
Braun KF 157 User Manual
Bloomfield 2080 User Manual