Clarion DXZ366MP User Manual

Owner’s manual  
ㄏノ弧明書  
사용 설명서  
CD/MP3/WMA RECEIVER/CeNET CONTROL  
CD/MP3/WMA 钡Μ竟/CeNET 北制  
CD/MP3/WMA 리시버/CeNET 컨트롤  
Contents  
1. FEATURES ........................................................................................................................... 2  
2. CONTROLS .......................................................................................................................... 3  
MAIN UNIT............................................................................................................................. 3  
3. BUTTON TERMINOLOGY ................................................................................................... 4  
Names of the Buttons and their Functions............................................................................. 4  
Major Button Operations when external equipment is connected to this unit ........................ 5  
4. PRECAUTIONS .................................................................................................................... 6  
5. HANDLING COMPACT DISCS ............................................................................................ 7  
(
)
6. DCP Detachable Control Panel ........................................................................................ 8  
7. REMOTE CONTROL ............................................................................................................ 9  
Inserting the Battery............................................................................................................... 9  
Functions of Remote Control Unit Buttons........................................................................... 10  
8. OPERATIONS ......................................................................................................................11  
Basic Operations ..................................................................................................................11  
Radio Mode Operations ....................................................................................................... 13  
CD/MP3/WMA Mode Operations ......................................................................................... 14  
Operations Common to Each Mode..................................................................................... 19  
9. OPERATIONS OF ACCESSORIES .................................................................................... 22  
CD Changer Operations ...................................................................................................... 22  
TV Operations ..................................................................................................................... 23  
10. TROUBLESHOOTING ........................................................................................................ 25  
11. ERROR DISPLAYS ............................................................................................................ 27  
12. SPECIFICATIONS .............................................................................................................. 28  
1. FEATURES  
Flip-down console  
MP3 and WMA compatible with ID3-TAG display  
Z-ENHANCER” sound customization & “MAGNA BASS EX” dynamic bass enhancement  
Be sure to unfold and read the next page.  
叫叭ゲ甶秨並綷弄下頁。  
반드시 다음 페이지를 펴서 읽으십시오.  
DXZ366MP  
2
2. CONTROLS / / 제어부  
MAIN UNIT / / 메인유닛  
With the FLIP DOWN PANEL opened / FLIP DOWN PANEL (秨面狾)砆  
ゴ秨/ 플립다운 패널이 열린 상태  
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.  
猔種:綷弄各彻時叫叭ゲ甶秨此頁並綷弄玡面的瓜。  
주: 반드시 이 페이지를 펴서 각 장을 읽을 때 앞면 도표를 참고하십시오.  
DXZ366MP  
3
3. BUTTON TERMINOLOGY  
Note:  
• Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 3.  
Names of the Buttons and their Functions  
[
]
[
]
OPEN button  
BND button  
[
]
• Deeply push in OPEN button to unlock the flip  
down panel.  
• Switch the band, or seek tuning or manual tuning  
while in the radio mode.  
• Play a first track while in the CD/MP3/WMA  
mode.  
Press and hold the button for 1 second or longer  
to perform multi-session.  
[
]
ADJ button  
• Press the button to switch to the ADJ mode.  
• Press the button to change the character.  
[
]
• Perform preset scan while in the radio mode.  
Press and hold the button for 2 seconds or  
longer to perform auto store.  
button  
[
] [  
]
UP , DN buttons  
(
)
• Select the Folder. MP3/WMA disc only  
• Play or pause a CD while in the CD/MP3/WMA  
mode.  
[
]
RDM button  
• Perform random play while in the CD/MP3/WMA  
mode.  
[
]
SENSOR  
• Receiver for remote control unit.  
• Operating range: 30° in all directions.  
• Press and hold the button for 1 second or longer  
to perform folder random play while in the MP3/  
WMA mode.  
[
]
ISR button  
• Recall ISR radio station in memory.  
[
]
RPT button  
• Repeat play while in the CD/MP3/WMA mode.  
• Press and hold for 2 seconds or longer: Store  
(
current station into ISR memory radio mode  
• Press and hold the button for 1 second or longer  
to perform folder repeat play while in the MP3/  
WMA mode.  
)
only .  
[
]
SCN button  
[ ]  
D button  
• Perform scan play for 10 seconds of each track  
while in the CD/MP3/WMA mode.  
(
• Switch the display indication Main display, Title  
)
display, Clock display .  
• Press and hold the button for 1 second or longer  
to perform folder scan play while in the MP3/  
WMA mode.  
• Press and hold the button for 1 second or longer  
to enter the display adjustment mode.  
[ ]  
Z button  
[
]
DIRECT buttons  
• Press the button to select one of the 3 types  
of sound characteristics already stored in  
memory.  
• Store a station into memory or recall it directly  
while in the radio mode.  
[
]
SRC button  
• Press the button to turn on the power.  
[ ]  
T button  
• Press the button to input a title in the Radio  
mode.  
• Press and hold the button for 1 second or longer  
to turn off the power.  
• Press the button to input a title in the CD  
mode.  
• Switch the operation mode among the radio  
mode, etc.  
• Press the button to switch the user titles or track  
titles, while in the CD/MP3/WMA mode.  
[
]
ROTARY knob  
• Adjust the volume by turning the knob clockwise  
or counterclockwise.  
• Use the knob to perform various settings.  
• Press the button to scroll the title during the CD-  
text play, while in the CD/MP3/WMA mode.  
DXZ366MP  
4
Names of the Buttons and their Functions  
[
A-M button  
• Press the button to switch to the audio mode.  
bass/treble, balance/fader  
• Press and hold for 1 second or longer to turn on  
or off the M-B EX mode.  
]
[
]
,
lever  
• Select a station while in the radio mode or select  
a track when listening to a CD. This lever is used  
to make various settings.  
(
)
• Press the lever upward or downward and hold  
in position for 1 second or longer to enter the  
fast-forward or fast-backward mode.  
[
]
button  
• Eject a CD when it is loaded into the unit.  
[
]
CD SLOT  
• CD insertion slot.  
Major Button Operations when external equipment is  
connected to this unit  
[
]
SCN button  
When the CD/DVD changer is  
connected  
For details, see the section “CD changer opera-  
tions”. For the DVD changer, refer to the Ownerʼs  
Manual provided with the DVD changer.  
• Perform scan play for 10 seconds of each  
track.  
Press and hold the button for 1 second or longer  
to perform disc scan play.  
[
]
,
lever  
[
]
button  
• Play or pause a CD or DVD.  
• Select a track when listening to a disc.  
• Press the lever upward or downward and hold  
in position for 1 second or longer to enter the  
fast-forward or fast-backward mode.  
[ ]  
D button  
• Press the button to display the title.  
• Press and hold the button for 1 second or longer  
to enter the display adjust mode.  
When the TV is connected  
For details, see the section “TV Operations”.  
[ ]  
T button  
[
]
• Press the button switches the user titles or track  
titles, etc. while in the CD changer mode.  
button  
• Perform preset scan while in the TV mode.  
• Press and hold the button for 1 second or longer  
to input a title in the CD changer mode.  
Press and hold the button for 2 seconds or  
longer to perform auto store.  
• Press the button to scroll the title during CD-text  
play.  
[
]
BND button  
• Switch the band.  
[
]
BND button  
• Move the next disc in increasing order.  
Press and hold the button for 1 second or longer  
to switch to the seek tuning or manual mode.  
[
]
DIRECT buttons  
• Store a station into memory or recall it directly.  
[
• Select the disc.  
] [  
]
UP , DN buttons  
[
]
[
]
ADJ button  
RDM button  
• Press the button to switch to the ADJ mode.  
• Perform random play. Press and hold the button  
for 1 second or longer to perform disc random  
play.  
• Press and hold the button for 1 second or  
longer to switch to the TV picture mode or VTR  
(
)
external picture mode.  
[
]
RPT button  
[
]
,
lever  
• Perform repeat play. Press and hold the button  
for 1 second or longer to perform disc repeat  
play.  
• Select a station.  
DXZ366MP  
5
4. PRECAUTIONS  
1. When the inside of the car is very cold and  
the player is used soon after switching on the  
heater moisture may form on the disc or the  
optical parts of the player and proper playback  
may not be possible. If moisture forms on the  
disc, wipe it off with a soft cloth. If moisture  
forms on the optical parts of the player, do  
not use the player for about one hour. The  
condensation will disappear naturally allowing  
normal operation.  
2. Driving on extremely bumpy roads which  
cause severe vibration may cause the sound  
to skip.  
3. This unit uses a precision mechanism.  
Even in the event that trouble arises, never  
open the case, disassemble the unit, or  
lubricate the rotating parts.  
CAUTION  
!
USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN  
THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.  
THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE  
EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.  
INFORMATION FOR USERS:  
CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFAC-  
TURER WILL VOID THE WARRANTY.  
DXZ366MP  
6
5. HANDLING COMPACT DISCS  
This unit has been designed specifically for play-  
Note on compact discs  
Never stick labels on the surface of the compact  
disc or mark the surface with a pencil or pen.  
back of compact discs bearing the  
mark. No other discs can be played.  
or  
To remove the compact disc from its storage case,  
press down on the center of the case and lift the  
disc out, holding it carefully by the edges.  
Do not use any solvents such as commercially  
available cleaners, anti-static spray, or thinner to  
clean compact discs.  
Always handle the compact disc by the edges.  
Never touch the surface.  
To remove fingermarks and dust, use a soft cloth,  
and wipe in a straight line from the center of the  
compact disc to the circumference.  
Do not use compact discs that have large scratch-  
es, are misshapen, or cracked, etc. Use of such  
discs will cause misoperation or damage.  
New discs may have some roughness around  
the edges. The unit may not work or the sound  
may skip if such discs are used. Use a ball-point  
pen, etc. to remove roughness from the edge of  
the disc.  
Do not expose compact discs to direct sunlight or  
any heat source.  
Note:  
Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These  
may get caught in the internal mechanism and damage the disc.  
DXZ366MP  
7
(
)
6. DCP Detachable Control Panel  
The control panel can be detached to prevent  
theft. When detaching the control panel, store it  
CAUTION  
!
(
)
in the DCP Detachable Control Panel case to  
prevent scratches.  
Be sure to close the HOLD FLAP for safety  
when removing the DCP.  
We recommend taking the DCP with you when  
leaving the car.  
Attaching the DCP  
1. Insert the right side of the DCP into the main  
unit.  
Removing the DCP  
[
2. Insert the left side of the DCP to attach into  
the main unit.  
]
1. Press the SRC button for 1 second or longer  
to switch off the power.  
[
]
2. Press in the OPEN button.  
If the flip down panel does not open fully, gently  
open it with your hand.  
CAUTION  
!
• The DCP can easily be damaged by shocks.  
After removing it, be careful not to drop it or  
subject it to strong shocks.  
• If the FLIP DOWN PANEL is kept open, the  
DCP may drop due to vibration of the car.  
This result in damage to the DCP. So close  
the FLIP DOWN PANEL or remove the DCP  
to store into the case.  
• The connector connecting the main unit and  
the DCP is an extremely important part. Be  
careful not to damage it by pressing on it  
with fingernails, pens, screwdrivers, etc.  
3. Pull the DCP toward you and remove it.  
4. Close the HOLD FLAP.  
Note:  
• If the DCP is dirty, wipe off the dirt with a soft, dry  
cloth only.  
DXZ366MP  
8
7. REMOTE CONTROL  
Inserting the Battery  
Notes:  
1. Turn over the remote control unit and slide the  
cover in the direction indicated by the arrow in  
the illustration.  
Misuse may result in rupture of the battery, producing  
leakage of fluid and resulting in personal injury or  
damage to surrounding materials.Always follow these  
safety precautions:  
• Use only the designated battery.  
• When replacing the battery, insert properly, with  
(
)
2. Insert the battery CR2025 into the insertion  
(+)  
guides, with the printed side  
upwards.  
facing  
3. Press the battery in the direction indicated by the  
arrow so that it slides into the compartment.  
+
/- polarities oriented correctly.  
• Do not subject battery to heat, or dispose of in fire or  
water. Do not attempt to disassemble the battery.  
• Dispose of used batteries properly.  
4. Replace the cover and slide in until it clicks  
into place.  
DXZ366MP  
9
Functions of Remote Control Unit Buttons  
Mode  
Button  
CD Changer  
DVD Changer  
CD/MP3/WMA  
TV  
Radio  
[
]
SRC  
Press the button to power on.  
Press and hold the button for 1 second or longer: Power off.  
Switch among radio, CD/MP3/WMA, CD changer, DVD changer and TV.  
[
]
Switch reception  
band.  
Play the first track.  
Top play.  
Move the next disc in Switch reception  
increasing order.  
BND  
band.  
(
)
Increase and decrease volume in all modes .  
[
]
[
]
,
[
]
[
]
,
Move preset chan-  
nels up and down.  
Move tracks up and down.  
Press and hold the button for 1 second or  
longer: Fast-forward/fast-backward.  
Move preset chan-  
nels up and down.  
[
]
No function.  
Switch between playback and pause.  
No function.  
[
]
MUTE  
Turn mute on and off.  
[
]
ISR  
Recall ISR radio station in memory.  
Press and hold for 2 seconds or longer: Store current station into ISR memory radio mode  
(
)
only .  
[
]
Switch among main display, title display, clock display.  
DISP  
[
]
Preset scan.  
Scan play.  
Scan play.  
Preset scan.  
SCN  
Press and hold the  
button for 2 seconds  
or longer: Auto store.  
Press and hold the  
button for 2 seconds  
or longer: Auto store.  
Press and hold the  
button for 1 second  
or longer to perform  
Press and hold the  
button for 1 second  
or longer: Disc scan  
folder scan play while play.  
in the MP3/WMA  
mode.  
[
]
RPT  
No function.  
Repeat play.  
Repeat play.  
No function.  
Press and hold the  
button for 1 second  
or longer to perform  
folder repeat play  
while in the MP3/  
WMA mode.  
Press and hold the  
button for 1 second  
or longer: Disc repeat  
play.  
[
]
No function.  
Random play.  
Random play.  
Switch between TV  
and VTR.  
RDM  
Press and hold the  
button for 1 second  
or longer to perform  
folder random play  
while in the MP3/  
WMA mode.  
Press and hold the  
button for 1 second or  
longer: Disc random  
play.  
Some of the corresponding buttons on the main unit and remote control unit have different functions.  
DXZ366MP  
10  
8. OPERATIONS  
Note:Be sure to read this chapter referring to the front diagrams of  
chapter “2. CONTROLS” on page 3.  
Basic Operations  
Radio mode CD/MP3/WMA mode  
CD changer mode DVD changer mode  
TV mode Radio mode...  
! CAUTION  
Be sure to lower the volume before switching  
off the unit power or the ignition key. The  
unit remembers its last volume setting. If you  
switch the power off with the volume up, when  
you switch the power back on, the sudden loud  
volume may hurt your hearing and damage  
the unit.  
External equipment not connected with CeNET  
is not displayed.  
Note:  
• If the CD mode is selected when no disc is inserted,  
the display shows “NO DISC”.  
Switching the display  
[ ]  
Turning on/off the power  
Note:  
Press the D button to select the desired display.  
• Be careful about using this unit for a long time  
without running the engine. If you drain the carʼs  
battery too far, you may not be able to start the  
engine and this can reduce the service life of the  
battery.  
[ ]  
Each time you press the D button, the display  
switches in the following order:  
Main display Title display Clock display  
Main display  
Once selected, the preferred display becomes the  
display default. When a function adjustment such  
as volume is made, the screen will momentarily  
switch to that functionʼs display, then revert back  
to the preferred display several seconds after the  
adjustment.  
[
1. Press the SRC button.  
]
2. The illumination and display on the unit  
light up. The unit automatically remem-  
bers its last operation mode and will au-  
tomatically switch to display that mode.  
When you have entered a title in a CD/MP3/WMA,  
it appears in the title display. If you have not en-  
tered a title, “NO TITLE” appears in the title display  
instead.  
[
]
3. Press and hold the SRC button for 1 second  
or longer to turn off the power for the unit.  
Notes:  
• System check  
For information on how to enter a title, refer to the  
subsection “Entering titles” in section “Operations  
Common to Each Mode”.  
The first time this unit is turned on after the wire  
connections are completed, it must be checked  
what equipment is connected. When the power is  
turned on, the “SYSTEM CHK” appears in the dis-  
play, then the unit returns to the clock display mode.  
The system check starts within the unit. When the  
Adjusting the volume  
[
]
Turning the ROTARY knob clockwise increases  
the volume; turning it counter-clockwise decreases  
the volume.  
[
]
system check is complete, press the SRC button  
again.  
(
)
(
The volume level is from 0 minimum to 33 maxi-  
)
mum .  
Selecting a mode  
[
]
1. Press the SRC button to change the operation  
mode.  
Audio mode adjustments  
[
[
]
2. Each time you press the SRC button, the op-  
eration mode changes in the following order:  
]
1. Press the A-M button to select the adjustment  
mode. The mode switches as follows each time  
[
the A-M button is pressed:  
]
BASS TREB BAL FAD Previous  
mode  
DXZ366MP  
11  
Basic Operations  
[
]
2. Turning the ROTARY knob to adjust the se-  
lected audio mode.  
Adjusting the fader  
[
1. Press the A-M button and select “FAD 0”.  
]
(
)
-
+
+
BASS Bass : Adjustment range : 6 to  
7
[
]
2. Turning the ROTARY knob clockwise  
emphasizes the sound from the front speakers;  
turning it counterclockwise emphasizes the  
sound from the rear speakers.  
(
)
-
TREB Treble : Adjustment range : 6 to  
6
(
)
BAL Balance : Adjustment range : L13 to R13  
(
)
FAD Fader : Adjustment range : F12 to R12  
The factory default setting is “FAD 0”.  
(
The display returns to the previous mode 7  
seconds after the adjustment.  
)
Adjustment range: F12 to R12  
3. When the adjustment is complete, press the  
[
mode is reached.  
]
A-M button several times until the function  
Setting the Z-Enhancer  
This unit are provided with 3 types of sound tone  
effects stored in memory. Select the one you  
prefer.  
Adjusting MAGNA BASS EX  
The MAGNA BASS EX does not adjust the low  
sound area like the normal sound adjustment  
function, but emphasizes the deep bass sound  
area to provide you with a dynamic sound.  
The factory default setting is “Z-EHCR OFF”.  
[ ]  
Each time you press the Z button, the tone effect  
changes in the following order:  
Z-EHCR OFF” “BASS BOOST”  
EXCITE” “Z-EHCR OFF” ...  
IMPACT”  
The factory default setting is off.  
[
]
1. Press and hold the A-M button for 1 second or  
longer to turn on the MAGNA BASS EX effect.  
M-B EX” lights in the display.  
• BASS BOOST: bass emphasized  
• IMPACT  
• EXCITE  
: bass and treble emphasized  
: bass and treble emphasized  
mid de-emphasized  
[
]
2. Press and hold the A-M button for 1 second or  
longer to turn off the MAGNA BASS EX effect.  
M-B EX” goes off from the display.  
• Z-EHCR OFF : no sound effect  
Adjusting the balance  
[
1. Press the A-M button and select “BAL 0”.  
]
[
]
2. Turning the ROTARY knob clockwise empha-  
sizes the sound from the right speaker; turning  
it counterclockwise emphasizes the sound from  
the left speaker.  
The factory default setting is “BAL 0”.  
(
)
Adjustment range: L13 to R13  
3. When the adjustment is complete, press the  
[
mode is reached.  
]
A-M button several times until the function  
DXZ366MP  
12  
Radio Mode Operations  
Press the  
Quick tuning:  
[
Listening to the radio  
[
]
,
lever upward or downward  
]
1. Press the SRC button and select the radio  
mode, then the radio will be on.  
and hold in position for 1 second or longer to begin  
station tuning.  
[
]
2. To select a preset band, press the BND  
button, then select one of the preset bands  
such as FM1, FM2, FM3 or AM. Every time  
Press the  
Step tuning:  
[
to perform manual tuning.  
]
,
lever upward or downward  
[
]
the BND button is pressed, the display will  
change as:  
FM1 FM2 FM3 AM FM1...  
Preset memory function  
Preset memory function can store up to 24  
stations:  
[
ward to tune in the desired station.  
]
3. Press the  
,
lever upward or down-  
six stations for each of FM1, FM2, FM3 and AM.  
Seek tuning  
[
]
1. Press the BND button and select the desired  
Manual memory function  
[
(
)
band FM or AM .  
]
1. Press the BND button, to select a band you  
want to store in the memory.  
If “MANU” is lit in the display, press and hold  
[
]
the BND button for 1 second or longer.  
[
,
]
2. Press the  
station.  
lever to tune into a desired  
MANU” in the display goes off and seek tuning  
is now available.  
[
]
[
to start automatic station tuning.  
,
]
3. Press and hold one of the DIRECT button for  
2 seconds or longer to store the current station  
into preset memory.  
2. Press the  
lever upward or downward  
When the lever is pressed upward, search  
will be performing in the direction of higher  
frequencies. When the lever is pressed  
downward, search will be performed in the  
direction of lower frequencies.  
Auto store  
Auto store is a function for storing up to 6 stations  
that are automatically tuned in sequentially.  
If 6 receivable stations cannot be received, a  
previously stored station remains unoverwritten  
at the memory position.  
Manual tuning  
There are 2 ways available: Quick tuning and  
step tuning.  
[
]
1. Press the BND button and select the desired  
(
)
band FM or AM .  
When you are in the step tuning mode, the  
frequency changes one step at a time. In the quick  
tuning mode, you can quickly tune the desired  
frequency.  
[
]
2. Press and hold the PS/AS button for 2  
seconds or longer. The stations with good  
reception are stored automatically to the preset  
channels.  
[
]
1. Press the BND button and select the desired  
(
)
band FM or AM .  
If “MANU” is not lit in the display, press and hold  
[
Preset scan  
]
the BND button for 1 second or longer.  
Preset scan receives the stations stored in preset  
memory in order. This function is useful when  
searching for a desired station in memory.  
MANU” is lit in the display and manual tuning  
is now available.  
[
1. Press the PS/AS button.  
]
2. Tune into a station.  
2. When a desired station is tuned in, press the  
[
]
PS/AS button again to continue receiving that  
station.  
DXZ366MP  
13  
CD/MP3/WMA  
Mode Operations  
Radio Mode Operations  
Note:  
What is MP3?  
[
]
• Be careful not to press and hold the PS/AS button  
for 2 seconds or longer, otherwise the auto store  
function is engaged and the unit starts storing sta-  
tions.  
MP3 is an audio compression method and  
classified into audio layer 3 of MPEG standards.  
This audio compression method has penetrated  
into PC users and become a standard format. This  
MP3 features the original audio data compression  
to about 12 percent of its initial size with a high  
quality sound. This means that about 10 music  
CDs can be recorded on a CD-R disc or CD-RW  
disc to allow a long listening time without having  
to change CDs.  
Recalling a preset station  
(
A total of 24 preset positions 6-FM1, 6-FM2,  
)
6-FM3, 6-AM exists to store individual radio  
stations in memory. Pressing the corresponding  
[
DIRECT button recalls the stored radio frequency  
automatically.  
]
What is WMA?  
[
]
1. Press the BND button and select the desired  
(
)
band FM or AM .  
WMA is the abbreviation of Windows Media  
Audio, an audio file format developed by Microsoft  
Corporation.  
[
]
2. Press the corresponding DIRECT button to  
recall the stored station.  
Notes:  
[
]
Press and hold one of the DIRECT buttons for  
2 seconds or longer to store that station into  
preset memory.  
(
• If you play a file with DRM Digital Rights Manage-  
)
ment for WMA remaining ON, no audio is output.  
• Windows Media™, and the Windows® logo are  
trademarks, or registered trademarks of Microsoft  
Corporation in the United States and/or other  
countries.  
(
)
Instant station recall ISR  
Instant station recall is a special radio preset that  
instantly accesses a favorite radio station at a  
touch of a button. The ISR function even operates  
with the unit in other modes.  
To disable DRM  
(
)
Digital Rights Management :  
1. When using Windows Media Player 8, click on  
TOOLS OPTIONS COPY MUSIC tab,  
ISR memory  
1. Select the station that you wish to store in ISR  
memory.  
then under COPY SETTINGS unclick the  
check box for PROTECT CONTENT. Then,  
reconstruct files.  
[
]
2. Press and hold the ISR button for 2 seconds  
or longer.  
2. When using Windows Media Player 9, click on  
TOOL OPTIONS MUSIC RECORD tab,  
then under Recording settings, unclick the  
Check box for RECORD PROTECTED  
MUSIC. Then, reconstruct files. Personally  
constructed WMA files are used at your own  
responsibility.  
Recalling a station with ISR  
[
]
In any mode, press the ISR button to turn on the  
radio function and tune the selected radio station.  
[
]
ISR” appears in the display. Press the ISR button  
again to return to the previous mode.  
Precautions when creating MP3/WMA  
disc  
Usable sampling rates and bit rates:  
1. MP3: Sampling rate 11.025 kHz-48 kHz,  
Bit rate: 8 kbps-320 kbps/VBR  
2. WMA: Bit rate 48 kbps-192 kbps  
DXZ366MP  
14  
CD/MP3/WMA Mode Operations  
5. CD-DA/MP3/WMA selection function can only  
be performed in CD/MP3/WMA mode. It will  
only activate after re-insert CD. For example,  
File extensions  
Always add a file extension “.MP3” or “.WMA”  
to MP3 or WMAle by using single byte letters.  
If you add a file extension other than specified  
or forget to add the file extension, the file  
cannot be played.  
[
]
current setting is CD-DA type. Press BND  
button for more than 1 second to set MP3/WMA  
type. User has to eject CD and re-insert again  
as to play MP3/WMA files.  
(
Logical format File system  
)
6. Types of recording that can be played are as  
follows.  
1. When writing MP3/WMAle on a CD-R disc or  
CD-RW disc, please select “ISO9660 level 1, 2  
or JOLIET or Romeo” as the writing software  
format. Normal play may not be possible if the  
disc is recorded on another format.  
Setting  
Set to CD Set to MP3/WMA  
Disc  
Mixed with CD  
and MP3/WMA  
type tracks  
Play CD  
Play MP3/WMA  
2. The folder name and file name can be  
displayed as the title during MP3/WMA play  
but the title must be within 64 single byte  
CD type track only  
Play CD  
Play CD  
MP3/WMA type  
track only  
Play MP3/  
WMA  
Play MP3/WMA  
(
alphabetical letters and numerals including  
)
an extension .  
7. When a mixed mode CD is loaded and CD is  
set, the track to be played first is MP3/WMA  
file data and no sound is heard.  
3. Do not affix a name to a file inside a folder  
having the same name.  
Note:  
Folder structure  
• When playing a CCCD (Copy Control CD), set the  
setting to CD type. When this is set to MP3/WMA  
type, the CD cannot be played normally in some  
cases.  
1. A disc with a folder having more than 8  
hierarchical levels will be impossible.  
Number of files or folders  
1. Up to 255 files can be recognized per folder.  
Up to 512 files can be played.  
Disc-In-Play function  
As long as the ignition key is turned to the ON  
or ACC position, this function allows you to turn  
the power to the unit and start playing the disc  
automatically when the disc is inserted even if the  
power is not turned on.  
2. Tracks are played in the order that they were  
(
recorded onto a disc. Tracks might not always  
)
be played in the order displayed on the PC.  
3. Some noise may occur depending on the type  
of encoder software used while recording.  
! CAUTION  
CD-DA/MP3/WMA selection on  
multi-session CD  
1. If a multi-session CD which contains CD-DA  
and MP3/WMAles is being inserted, user can  
select either CD-DA or MP3/WMA files to be  
played.  
• Do not try to put your hand or fingers in the  
disc insertion slot. Also never insert foreign  
objects into the slot.  
• Do not insert discs where adhesive comes  
out from cellophane tape or a rental CD label,  
or discs with marks where cellophane tape  
or rental CD labels were removed. It may be  
impossible to extract these discs from the  
unit and they may cause the unit to break  
down.  
2. Default setting for files to be played on  
multisession CD is CD-DA files.  
[
]
3. Press the BND button for more than 1 second  
will toggle between selection of CD-DA and  
[
]
MP3/WMA files to be played.  
Backup eject function  
4. When CD-DA type is selected, display will  
show “M-SESS CD”. When MP3/WMA type is  
selected, display will show “M-SESS MP3”.  
[
]
if the power to the unit was not turned on.  
Just pressing the  
button ejects the disc even  
[
]
1. Press the OPEN button to open the FLIP  
DOWN PANEL.  
DXZ366MP  
15  
CD/MP3/WMA Mode Operations  
Note:  
• If the FLIP DOWN PANELwill not open far enough,  
open it gently with your hand.  
Loading 8 cm CD  
No adapter is required to play an 8 cm CD.  
Insert the 8 cm CD into the center of the insertion  
slot.  
[
]
2. Press the  
is ejected.  
button. Remove the disc after it  
3. Close the FLIP DOWN PANEL.  
3. Close the FLIP DOWN PANEL.  
Notes:  
• Always close the FLIP DOWN PANEL once you  
take out the disc.  
! CAUTION  
Be careful not to catch your hand or fingers  
while closing the FLIP DOWN PANEL.  
• If you force a CD into before auto reloading, this  
can damage the CD.  
Notes:  
• If the FLIP DOWN PANEL does not open fully,  
gently open with your hand.  
(
)
• If a CD 12 cm is left in the ejected position for 15  
(
seconds, the CD is automatically reloaded. Auto  
• After loading a CD, always close the FLIP DOWN  
PANEL.  
)
reload .  
• 8 cm CDs are not auto reloaded. Be sure to remove  
it when ejected.  
Pausing play  
[
appears in the display.  
]
1. Press the  
button to pause play. “PAUSE”  
Listening to a disc already loaded  
in the unit  
[
]
2. To resume CD play, press the  
again.  
button  
[
]
Press the SRC button to select the CD/MP3/  
WMA mode.  
When the unit enters the CD/MP3/WMA mode,  
play starts automatically.  
Displaying CD titles  
This unit can display title data for CD-text/MP3/  
WMA disc and user titles input with this unit.  
If there is no disc loaded, the indication “NO DISC”  
appears in the title display.  
[ ]  
1. Press the D button to display the title.  
[
The mode changes each time the SRC button is  
]
(
pressed. Modes are not displayed for equipment  
[ ]  
2. Each time you press the T button, the title  
display changes in the following order:  
)
that is not connected.  
(
CD changer  
Radio...  
)
Radio CD/MP3/WMA  
)
CD-TEXT data  
(
(
)
(
DVD changer  
TV  
)
(
CD-text title disc  
)
User title disc  
Artist name  
(
CD-text title track  
)
(
User title disc ...  
)
Loading a CD  
[
]
1. Press the OPEN button to access the CD  
SLOT behind the FLIP DOWN PANEL.  
MP3/WMA disc  
Folder Track Album TAG Artist TAG  
Title TAG Folder...  
2. Insert a CD into the center of the CD SLOT  
with the labeled side facing up. The CD plays  
automatically after loading.  
Notes:  
• If the CD playing is not a CD-text data or no user  
title has been input, “NO TITLE” appears in the  
display.  
Notes:  
• Never insert foreign objects into the CD SLOT.  
• If the CD is not inserted easily, there may be an-  
other CD in the mechanism or the unit may require  
service.  
• If MP3/WMA disc is not input TAG, “NO TAG” ap-  
pears in the display.  
• For MP3, supports ID3 Tags V2.3/2.2/1.1/1.0.  
Tag displays give priority to V2.3/2.2  
• Discs not bearing the  
CD-ROMs cannot be played by this unit.  
or  
mark and  
• In the case of album Tags for WMA, the information  
written into the extension header is displayed.  
• Some CDs recorded in CD-R/CD-RW mode may  
not be usable.  
• Only ASCII characters can be displayed in Tags.  
DXZ366MP  
16  
CD/MP3/WMA Mode Operations  
Display selection  
1. You can choose the display type for MP3/WMA  
Selecting a track  
• Track-up  
1. Press the  
[ ]  
CD by pressing the D button.  
[
]
beginning of the next track.  
lever upward to move to the  
[ ]  
To select the next type, press the D button  
again.  
[
]
2. Each time the  
lever is pressed upward,  
playback proceeds to another track in the  
advancing direction.  
The arrangement is shown below.  
• Track-down  
1. Press the  
[
beginning of the current track.  
]
lever downward to move the  
[
to the beginning of the previous track.  
]
2. Press the  
lever downward twice to move  
Fast-forward/fast-backward  
Fast-forward  
Press the  
1 second or longer.  
[
]
lever upward and hold in position for  
Title display mode  
1. There are 5 types of display for the Title Display  
mode.  
• Fast-backward  
Press the [ ] lever downward and hold in posi-  
tion for 1 second or longer.  
[ ]  
2. To select the next type, press the T button for  
less than 1 second.  
For MP3/WMA discs, it takes some time until the  
start of searching and between tracks. In addition,  
the playing time may have a margin of error.  
The arrangement is shown below.  
After 2 seconds  
MP3/WMA playing order  
When selected for play folder up down functions,  
files and folders are accessed in the order in which  
they were written by the CD-ROM writer. Because  
of this, the order in which they are expected to  
be played may not match the order in which they  
are actually played. You may be able to set the  
order in which MP3/WMA are to be played by  
writing them onto a medium such as a CD-R with  
their file names beginning with play sequence  
numbers such as “01” to “99”, depending on your  
CD writer.  
3. The displayed item can be scrolled by pressing  
[ ]  
the T button for more than 1 second.  
4. If a MP3/WMA file does not support for ID3  
TAG, the display will show “NO TAG”  
For example, a medium with the following folder/  
file hierarchy is shown below.  
5. If a MP3/WMAle encode with ID3 TAG header  
but no consist of any TAG information, the  
display will show nothing.  
Notes:  
• The folder name will be displayed as “ROOT” which  
the file allocates in the root folder.  
• The MP3 player decodes each file ID3 TAG ver 2  
by default, if ID3 TAG ver 2 is unavailable, ID3 TAG  
ver 1 will be decoded.  
(
)
• UNICODE ID3 Chinese, Japanese and etc is not  
supported.  
DXZ366MP  
17  
CD/MP3/WMA Mode Operations  
[
]
Press the UP button while in the final folder  
to shift to the first folder.  
Example of a mediumʼs folder/file hierarchy  
Folder without an MP3/WMA file is not  
selectable.  
[
,
]
2. To select a track, press the  
upward or downward.  
lever  
Top function  
The top function resets the CD player to the first  
[
]
track of the disc. Press the BND button to play  
(
)
the first track Track No. 1 on the disc.  
In case of MP3/WMA, the first track of a folder being  
played will be returned.  
Other various play functions  
Scan play  
This function allows you to locate and play the first  
10 seconds of all the tracks recorded on a disc.  
[
]
1. Press the SCN button to perform scan play.  
The indication “SCN” lights in the display.  
Scan play starts from the next track after the  
track currently being played.  
Folder scan play  
This function allows you to locate and play the first  
10 seconds of the first track of all the folders on  
an MP3/WMA disc.  
Folder select  
This function allows you to select a folder  
containing MP3/WMA files and start playing from  
the first track in the folder.  
[
]
1. Press and hold the SCN button for 1 second  
or longer to perform folder scan play.  
[
1. Press the DN or the UP button.  
]
[
]
The indications “ALL...” and “SCN” light in the  
display.  
[
]
Press the DN button to move the previous  
[
]
folder. Press the UP button to move the next  
folder.  
Folder scan play starts from the next track  
after the track currently being played.  
Repeat play  
This function allows you to play the current track  
repeatedly.  
[
]
1. Press the RPT button to perform repeat play.  
The indication “RPT” lights in the display.  
Folder repeat play  
This function allows you to play a track currently  
being played in the MP3/WMA folder repeatedly.  
[
]
1. Press and hold the RPT button for 1 second  
or longer to perform folder repeat play.  
The indications “ALL...” and “RPT” light in the  
display.  
DXZ366MP  
18  
Operations Common to  
Each Mode  
CD/MP3/WMA Mode Operations  
Random play  
To change display setting  
[ ]  
This function allows you to play all tracks recorded  
on a disc in a random order.  
1. Press and hold the D button for 1 second or  
longer to switch to the adjustment selection  
display.  
[
]
1. Press the RDM button to perform random  
play.  
[
,
]
2. Press the  
to select the “item name”.  
( )  
lever upward or downward  
The indication “RDM” lights in the display.  
CLOCK E ”  
( )  
SCREEN SVR”  
AUTO SCROL”  
MSG  
DIMMER”  
Folder random play  
INP E ”  
This function allows you to play all the tracks of  
all the folders recorded on an MP3/WMA disc in  
a random order.  
[
]
3. Turn the ROTARY knob to select the “desired  
setting value”.  
In the case of item names appearing with the  
[
[
]
1. Press and hold the RDM button for 1 second  
or longer to perform folder random play.  
]
E” suffix, after the item name, the  
must be pressed to display the setting value.  
button  
The indications “ALL...” and “RDM” light in the  
display.  
[ ]  
After completing settings, press the D button  
to return to the previous mode.  
To cancel play  
Setting the clock  
2-1. Select “CLOCK <E>”.  
1. Press the operating button previously  
selected.  
[
]
3-1. Press the  
button.  
[
,
]
to select the hour or the minute.  
3-2. Press the  
lever upward or downward  
[
]
3-3. Turn the ROTARY knob to set the correct  
time.  
The clock is displayed in 12-hour format.  
[
]
3-4. Press the  
memory.  
button to store the time into  
Note:  
You cannot set the clock when it is displayed with  
only the ignition on. If you drain or remove the carʼs  
battery or take out this unit, the clock is reset. While  
setting the clock, if another button or operation is  
selected, the clock set mode is canceled.  
Turning the screen saver function on  
or off  
This unit is provided with the screen saver function  
which allows you to show various kinds of patterns  
and characters in the operation status indication  
area of the display in a random order. You can turn  
on and off this function.  
If the button operation is performed with the  
screen saver function on, the operation display  
corresponding to the button operation is shown  
for about 30 seconds and the display returns to  
the screen saver display.  
The factory default setting is “ON”.  
DXZ366MP  
19  
Operations Common to Each Mode  
• ON:  
To scroll automatically.  
2-1. Select “SCREEN SVR”.  
[
]
3-1. Turn the ROTARY knob to select the setting.  
• OFF:  
To scroll just 1 time when the title was changed or the  
[ ]  
T button was pressed for 1 second or longer.  
[
Each time you turn the ROTARY knob,  
the setting changes in the following order:  
]
SS OFF SS ON SS MESSAGE.  
Dimmer control  
You can setting the dimmer control “ON” or  
Entering MESSAGE INFORMATION  
Message up to 30 characters long can be stored  
in memory and displayed as a type of screen  
saver setting.  
OFF”.  
The factory default setting is “ON”.  
2-1. Select “DIMMER”.  
The factory default setting is “WELCOME TO  
CLARION”.  
[
]
3-1. Turn the ROTARY knob to select “ON” or  
OFF”.  
2-1. Select “MSG INP <E>”.  
[
]
3-1. Press the  
button.  
To change other settings  
[
[
]
3-2. Press and hold BND button for 1 second or  
longer to clear the old message.  
]
1. Press the ADJ button to switch to the adjust-  
ment selection display.  
[
to move the cursor.  
]
3-3. Press the  
,
leverupwardordownward  
[
to select the “item name”.  
,
]
2. Press the  
lever upward or downward  
[
3-4. Press the BND button to select a character.  
Each time you press the BND button, the  
]
[
]
[
,
]
Each time the  
lever is pressed up/  
character changes in the following orders:  
down, the item display changes in the following  
order:  
Capital letters Numbers Symbols  
Capital letters...  
BLINK LED”  
( )  
SYS CHK E ”  
AMP CANCEL”  
[
]
3-5. Turn the ROTARY knob to select the desired  
character.  
[
]
3. Turn the ROTARY knob to select the “desired  
setting item”.  
3-6. Repeat step 3-3 to 3-5 to enter up to 30  
characters for message.  
[
After completing settings, press the ADJ but-  
]
ton to return to the previous mode.  
[
]
3-7. Press and hold the  
button for 2 seconds  
or longer to store the message in memory  
and cancel input message mode.  
Anti-theft indicator  
The red Anti-theft indicator is a function for pre-  
venting theft. When the DCP is removed from the  
unit, this indicator blinks.  
[
]
Press and hold the BND button for 1 second  
or longer to cancel the input message.  
[
]
Then press and hold the  
button for 2  
The factory default setting is “OFF”.  
seconds or longer to store the message and  
the message return to default setting.  
2-1. Select “BLINK LED”.  
[
]
3-1. Turn the ROTARY knob to select “ON” or  
OFF”.  
• Setting the method for title scroll  
Set how to scroll in CD-TEXT, MP3/WMA title.  
• Setting the external amplifier  
The factory default setting is “OFF”.  
The factory default setting is “ON”.  
2-1. Select “AUTO SCROL”.  
2-1. Select “AMP CANCEL”.  
[
]
3-1. Turn the ROTARY knob to select “ON” or  
OFF”.  
[
]
3-1. Turn the ROTARY knob to select “ON” or  
OFF”.  
DXZ366MP  
20  
Operations Common to Each Mode  
[
]
• ON:  
Use with connected AMP.  
7. Turn the ROTARY knob to select the desired  
character.  
• OFF:  
Use with inside AMP.  
8. Repeat steps 5 to 7 to enter up to 10 characters  
for the title.  
[
]
9. Press and hold the  
button for 2 seconds  
Performing a system check  
or longer to store the title into memory and  
cancel title input mode.  
This function allows you to perform a system check  
from the adjust mode when required.  
2-1. Select “SYS CHK <E>”.  
Clearing titles  
[
]
3-1. Press and hold the  
or longer.  
button for 1 second  
1. Select and play a CD in the CD changer or tune  
in to a TV station or TUNER for which you want  
to clear the title.  
SYSTEM CHK” appears in the display, then  
the unit returns to the previous operation  
mode.  
[
]
2. Press the  
display.  
D
button and display the title  
[ ]  
3. Press and hold the T button for 1 second or  
longer.  
Entering titles  
Titles up to 10 characters long can be stored in  
memory and displayed for CD, CD changer andTV  
stations. The number of titles that can be entered  
for each mode are as follows.  
The display switches to the title input display.  
[
]
4. Press and hold the BND button for 1 second  
or longer.  
All characters in the title disappear.  
Mode  
Number of titles  
50 titles  
[
]
5. Press and hold the  
button for 2 seconds  
CD mode  
TV mode  
Tuner mode  
or longer to clear the title and cancel title input  
mode.  
20 titles  
30 titles  
CD changer mode  
DCZ625 connected  
CDC655Tz connected  
Number of titles  
100 titles  
100 titles  
[
]
1. Press the SRC button to select the mode you  
(
,
want to enter a title TUNER CD, CD changer  
)
or TV .  
2. Select and play a CD in the CD changer or tune  
in to a TV station or TUNER for which you want  
to enter the title.  
[
]
3. Press the  
display.  
D
button and display the title  
[ ]  
4. Press and hold the T button for 1 second or  
longer.  
The display switches to the title input display.  
[
to move the cursor.  
,
]
5. Press the  
lever upward or downward  
[
]
6. Press the BND button to select a character.  
[
]
Each time you press the BND button, the  
character changes in the following order:  
Capital letters Numbers Symbols  
Capital letters...  
DXZ366MP  
21  
9. OPERATIONS OF ACCESSORIES  
CD Changer Operations  
Note:  
Displaying CD titles  
• The following operations are the same as for CD  
This unit can display title data for CD-text CDs and  
mode:  
user titles input with this unit.  
Pause  
Title data for CD-text CDs can be displayed with  
this unit only when it is connected to CDC655Tz.  
Track selection  
Fast-forward/fast-backward  
Scan play  
[ ]  
1. Press the D button to display the title.  
[ ]  
2. Each time you press the T button, the title  
display changes in the following order:  
Repeat play  
Random play  
(
User title disc  
Artist name CD-text title track  
)
(
)
CD-text title disc  
(
See “CD/MP3/WMA Mode Operations” page 14-  
(
)
User  
)
19 for details.  
(
)
title disc ...  
Notes:  
• If the CD playing is not a CD-text CD or no user  
title has been input, “NO TITLE” appears in the  
display.  
CD changer functions  
When an optional CD changer is connected  
through the CeNET cable, this unit controls all CD  
changer functions. This unit can control a total of  
2 changers.  
• If a CD-text CD is not input its disc title or a track  
title, “NO TITLE” appears in the display.  
[
]
Press the SRC button and select the CD changer  
mode to start play. If 2 CD changers are con-  
Procedure to scroll a title  
Set “SCROLL” to “ON” or “OFF”.  
[
]
nected, press the SRC button to select the CD  
changer for play.  
If “NO MAG” appears in the display, insert the  
magazine into the CD changer. “DISC CHECK” ap-  
(
The factory default setting is “ON”. Refer to the  
subsection “Turning the screen saver function  
(
)
pears in the display while the player loads checks  
the magazine.  
on or off” in section “Operation common to  
)
each mode”.  
If “NO DISC” appears in the display, eject the  
magazine and insert discs into each slot. Then,  
reinsert the magazine back into the CD changer.  
• When set to “ON”  
The title is automatically kept scrolling.  
• When set to “OFF”  
To scroll just 1 time when the title was changed or the  
Note:  
• Some CDs recorded in CD-R/CD-RW mode may  
not be usable.  
[ ]  
T button was pressed for 1 second or longer.  
Selecting a CD  
[
! CAUTION  
]
[
]
Press the UP or DN button to select the desired  
disc.  
CD-ROM discs cannot be played from every CD  
changer, itʼs depended on the model.  
If a CD is not loaded in a slot of magazine, press-  
[
ing the UP or DN button can not work.  
]
[
]
Other various play functions  
Disc scan play  
Disc scan play locates and plays the first 10  
seconds of the first track on each disc in the  
currently selected CD changer. This function  
continues automatically until it is cancelled.  
DXZ366MP  
22  
TV Operations  
CD Changer Operations  
Disc scan play is useful when you want to select a  
desired CD.  
Note:  
• The following operations are performed the same  
as for radio mode:  
[
]
1. Press and hold the SCN button for 1 second  
or longer. “ALL...” and “SCN” light in the display  
and disc scan play starts.  
Channel selection  
Storing channels in memory  
Calling channels from memory  
Auto store  
Disc repeat play  
After all the tracks on the current disc have been  
played, disc repeat play automatically replays the  
current disc over from the first track.  
Preset scan  
(
)
See “Radio Mode Operations” page 13-14 for  
details.  
This function continues automatically until it is  
cancelled.  
[
]
1. Press and hold the RPT button for 1 second  
or longer. “ALL...” and “RPT” light in the display  
and disc repeat play starts.  
TV tuner functions  
When an optional TV tuner is connected through  
the CeNET cable, this unit controls all TV tuner  
functions. To watch TV requires a TV tuner and  
monitor.  
Disc random play  
The disc random play selects and plays individual  
tracks or discs automatically in no particular  
order.  
Watching a TV  
[
]
1. Press the SRC button and select the TV  
mode.  
This function continues automatically until it is  
cancelled.  
[
]
2. Press the BND button to select the desired  
[
]
1. Press and hold the RDM button for 1 second  
or longer. “ALL...” and “RDM” light in the  
display and disc random play starts.  
(
)
TV band TV1 or TV2 . Each time the button is  
pressed, the input selection toggles between  
TV1 and TV2.  
[
to tune in the desired TV station.  
,
]
3. Press the  
lever upward or downward  
To cancel play  
1. Press the operating button previously  
selected.  
Watching a video  
The TV tuner has a VTR input terminal to which 1  
external device can be connected. Connect a 12  
(
)
V video cassette player VCP or videocassette  
(
)
recorder VCR to the TV tuner input terminal.  
[
]
1. Press and hold the ADJ button for 1 second  
or longer to select VTR.  
2. To return to the TV broadcast, press and hold  
[
]
the ADJ button for 1 second or longer.  
Setting the TV area  
(
)
When you select the TV area TV reception area ,  
the TV tuner area setting changes.  
[
]
1. Press the ADJ button to switch to the  
adjustment selection display.  
[
to select “TV AREA <E>”.  
]
2. Press the  
,
lever upward or downward  
[
]
3. Press the  
button.  
[
]
4. Turn the ROTARY knob to select the reception  
area.  
DXZ366MP  
23  
TV Operations  
[
]
5. Press the  
button.  
[
]
6. Press the ADJ button to return to the previous  
mode.  
Setting the TV diver  
You can change the reception setting for the TV  
antenna connected to the TV tuner.  
[
]
1. Press the ADJ button to switch to the adjust-  
ment selection display.  
[
,
to select “TV DIVER”.  
]
2. Press the  
lever upward or downward  
[
]
3. Turn the ROTARY knob clockwise to set to  
ON” or counterclockwise to set to “OFF”.  
• ON:  
Sets the diver setting to ON.  
• OFF:  
Sets the diver setting to OFF.  
[
]
4. Press the ADJ button to return to the previous  
mode.  
DXZ366MP  
24  
10.TROUBLESHOOTING  
Problem  
Cause  
Measure  
Power does not turn on. Fuse is blown.  
(
Replace with a fuse of the same amperage.  
If the fuse blows again, consult your store of  
purchase.  
)
No sound is produced  
Incorrect wiring.  
Consult your store of purchase.  
No sound output when  
operating the unit with  
amplifiers or power  
antenna attached.  
Power antenna lead is  
shorted to ground or  
excessive current is  
required for remote-on  
the amplifiers or power  
antenna.  
1. Turn the unit off.  
2. Remove all wires attached to the power  
antenna lead. Check each wire for a possible  
short to ground using an ohm meter.  
3. Turn the unit back on.  
4. Reconnect each amplifier remote wire to  
the power antenna lead one by one. If  
the amplifiers turn off before all wires are  
attached, use an external relay to provide  
(
remote-on voltage excessive current  
)
required .  
[
]
Nothing happens when  
button are pressed.  
Display is not accurate.  
The microprocessor has  
malfunctioned due to  
noise, etc.  
Turn off the power, then press the OPEN  
button and remove the DCP.  
Press the reset button for about 2 seconds  
with a thin rod.  
DCP or main unit  
connectors are dirty.  
Wipe the dirt off with a soft cloth moistened  
with cleaning alcohol.  
No sound heard.  
The speaker protection  
circuit is operating.  
1. Turn down sound volume. Function can  
also be restored by turning the power off  
and on again. (Speaker volume is reduced  
automatically when the speaker protection  
circuit operates).  
2. If the sound is muted again, consult our  
service department.  
DXZ366MP  
25  
Troubleshooting  
Problem  
Cause  
Measure  
No sound heard.  
MP3/WMA files are  
absent in a disc.  
Write MP3/WMA files onto the disc properly.  
Files are not recognized  
as an MP3/WMA file.  
Use MP3/WMA files encoded properly.  
File system is not  
correct.  
Use ISO9660 level 1, 2 or JOLIET or Romeo  
file system.  
Sound skips or is noisy.  
Disc is dirty.  
Clean the disc with a soft cloth.  
Disc is heavily scratched  
or warped.  
Replace with a disc with no scratches.  
Sound is cut or skipped. MP3/WMA files are not  
Use MP3/WMA files encoded properly.  
Noise is generated or  
noise is mixed with  
sound.  
encoded properly.  
Sound is bad directly  
Water droplets may  
Let dry for about 1 hour with the power on.  
after power is turned on. form on the internal lens  
when the car is parked  
in a humid place.  
Wrong filename  
File system is not  
correct.  
Use ISO9660 level 1, 2 or JOLIET or Romeo  
file system.  
DXZ366MP  
26  
11. ERROR DISPLAYS  
Error Display  
Cause  
Measure  
A DISC is caught inside the CD  
deck and is not ejected.  
This is a failure of CD deckʼs mechanism and  
consult your store of purchase.  
ERROR 2  
A DISC cannot be played due  
to scratches,etc.  
Replace with a non-scratched, non-warped-  
disc.  
ERROR 3  
ERROR 6  
A DISC is loaded upside-down  
inside the CD deck and does  
not play.  
Eject the disc then reload it properly.  
Error Display  
Cause  
Measure  
A CD inside the CD changer is  
not loaded.  
This is a failure of CD changerʼs mechanism  
and consult your store of purchase.  
ERROR 2  
A CD inside the CD changer  
cannot be played due to  
scratches, etc.  
Replace with a non-scratched, non-warped  
disc.  
ERROR 3  
ERROR 6  
A CD inside the CD changer  
cannot be played because it is  
loaded upside-down.  
Eject the disc then reload it properly.  
Error Display  
ERROR 2  
ERROR 3  
Cause  
Measure  
A DISC inside the DVD  
changer cannot be played.  
This is a failure of DVD mechanism and  
consult your store of purchase.  
A DISC cannot be played due  
to scratches, etc.  
Retry or replace with a non-scratched, non-  
warped-disc.  
A DISC inside the DVD chang- Eject the disc then reload it properly.  
er cannot be played because it  
is loaded upside-down.  
ERROR 6  
Parental level error.  
Region code error.  
Set the correct Parental level.  
ERROR P  
ERROR R  
Eject the disc and replace correct region code  
disc.  
DXZ366MP  
27  
12.SPECIFICATIONS  
FM tuner  
Frequency Range: 87.0 MHz to 108 MHz  
General  
Power Supply Voltage:  
(
14.4 V DC 10.8 V to 15.6 V allowable , nega-  
tive ground  
)
Usable Sensitivity: 11 dBf  
50 dB Quieting Sensitivity: 17 dBf  
Alternate Channel Selectivity: 75 dB  
Current Consumption: Less than 15 A  
(
Speaker Impedance: 4 Ω 4 Ω to 8 Ω allowable  
)
(
)
Stereo Separation 1 kHz : 35 dB  
(
)
Weight: 2.42 lb. 1.1 kg  
±
Frequency Response 3 dB : 30 Hz to 15 kHz  
(
)
Dimensions:  
178 mm Width X 50 mm Height X 152 mm  
Depth  
AM tuner  
Frequency Range:  
AM 531 kHz to 1629 kHz  
Usable Sensitivity: 25 μV  
CD player  
System: Compact disc audio system  
Usable Discs: Compact disc  
±
Frequency Response: 10 Hz to 20 kHz 1 dB  
(
)
(
Signal-to-Noise Ratio: 85 dB 1 kHz IHF-A  
)
Notes:  
• Specifications comply with JEITA Standards.  
(
Dynamic Range: 80 dB 1 kHz  
)
Harmonic Distortion: 0.01%  
• Specifications and design are subject to change  
without notice for further improvement.  
• Please make sure when connecting external power  
amplifier, that you properly, to the car chassis,  
ground the amplifier.  
MP3  
Decode Format: MPEG 1,2 and 2.5 -Layer 3  
(
)
Sampling rate kHz : MPEG-1: 32,44.1,48  
• If this is not done, severe damage to the source unit  
may happen.  
MPEG-2: 16,22.05,24  
MPEG-2.5: 8,11.025,12  
(
)
Bit-rate kbps : 8, 16, 24, 32, 40, 48, 56, 64,  
80, 96, 112, 128, 144, 160, 192,  
224, 256, 320, VBR  
CD-ROM Format: ISO9660 Level 1, 2, Romeo  
and Joliet  
Folder Level Limit: 8 Level  
Folder Support: 255  
File Support: 512  
Folder Name: Maximum 64 bytes  
File Name: Maximum 64 bytes  
Audio  
Maximum Power Output: 200 W 50 W X 4 ch  
(
)
Continuous Average Power Output:  
17 W X 4, into 4 Ω, 20 Hz to 20 kHz,1%THD  
(
)
Bass Control Action 100 Hz : ±14 dB  
(
Treble Control Action 10 kHz : ±14 dB  
)
(
)
Line Output with A/C 1 kHz, 10 kΩ : 1.8 V  
DXZ366MP  
28  
Clarion Co., Ltd.  
All Rights Reserved. Copyright © 2006: Clarion Co., Ltd.  
PE-2802K  
Printed in Malaysia / 在皑ㄓ﹁ㄈ印/ 인쇄국: 말레이시아  
280-8345-00  

Nokia 2855i User Manual
M Systems Flash Disk Pioneers Computer Accessories 91 SR 005 10 7L User Manual
Mr Coffee ES11 User Manual
Motorola SURFboard SBG901 User Manual
Motorola MOTORAZR V9m User Manual
LG Electronics MFL67226001 User Manual
LG Electronics LG Lifes Good Cell Phone A133CH User Manual
KitchenAid 4KPCM050PM0 User Manual
Casio GQ 50 User Manual
Antec Quiet Computing 0761345 03271 1 User Manual