Owner’s manual / Mode d’emploi
Bedienungsanleitung / Istruzioni per l’uso
Gebruiksaanwijzing / Manual de instrucciones
Bruksanvisning / Manual de instruções
DB158R/DB158RB
BD159R/BD159RG
CD RECEIVER
•
AMPLI-TUNER LECTEUR CD
•
CD-RECEIVER
•
RICEVITORE A CD
•
CD-RECEIVER
•
RECEPTOR CON REPRODUCTOR DE CD
•
CD-SPELARE/RECEIVER
•
RECEPTOR CD
CAUTIONS:
VAROITUS
This appliance contains a laser system and
is classified as a “CLASS 1 LASER
Suojakoteloa si saa avata. Laite sisältää
laserdiodin, joka lähettää näkymätöntä
silmille vaarallista lasersäteilyä.
PRODUCT”. To use this model properly,
read this Owner’s Manual carefully and keep
this manual for your future reference. In
case of any trouble with this player, please
contact your nearest “AUTHORIZED service
station”. To prevent direct exposure to the
laser beam, do not try to open the enclosure.
ADVARSEL.
Denne mærking er anbragt udvendigt på
apparatet og indikerer, at apparatet arbejder
med laserstråler af klasse 1, hvilket betyder,
at der anvendes laserstråler af svageste
klasse, og at man ikke på apparatets
yderside kan blive udsat for utilladelig
kraftig stråling.
!CAUTION
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED IN THE OWNER’S
MANUAL MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
APPARATET BØR KUN ÅBNES AF
FAGFOLK MED SÆRLIGT KENDSKAB TIL
APPARATER MED LASERSTRÅLER!
Indvendigt i apparatet er anbragt den her
gengivne advarselsmækning, som advarer
imod at foretage sådanne indgreb i
apparatet, at man kan komme til at udsaætte
sig for laserstråling.
OBS!
Apparaten innehåller laserkomponenten
som avger laserstrålning överstigande
gränsen för laserklass 1.
CONTROLS / LES COMMANDES / REGLER / CONTROLLI
REGELAARS / CONTROLES / KONTROLLER / CONTROLOS
1.
Main unit / Appareil principal / Hauptgerät / Apparecchio principale
Hoofdtoestel / Unidad principal / Huvudenhet / Unidade principal
[
]
ROTARY
[
]
CD SLOT
[
]
RELEASE
[
]
PTY
[
]
[
]
DIRECT
[
[
[
]
RPT
]
RDM
[
]
P/A
]
SCN
[
[
]
SS
[
], [
]
]
[ ]
[
]
Z
TA
[
]
BND
[
]
DISP
[
]
A-M
[
]
AF
[
]
SRC
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.
Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapitel die Frontdiagramme beachten.
Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo.
Opmerking: Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken.
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.
Observera: Vik ut denna sida för att kunna se figurerna över bilstereons framsida medan du läser de olika kapitlen.
Nota: Certifique-se de abrir esta página e consulte os diagramas frontais conforme realiza a leitura de cada capítulo.
2
DB158R/BD159R
Contents
1. CONTROLS .................................................................................................................................... 2
2. PRECAUTIONS .............................................................................................................................. 3
Handling Compact Discs ................................................................................................................. 3
LCD Screen ..................................................................................................................................... 3
3. DCP ................................................................................................................................................. 4
4. NOMENCLATURE .......................................................................................................................... 5
Names of the Buttons and their Functions ...................................................................................... 5
5. OPERATIONS ................................................................................................................................. 6
Basic Operations ............................................................................................................................. 6
Radio Operations ............................................................................................................................. 7
RDS Operations .............................................................................................................................. 7
CD Operations ................................................................................................................................. 9
6. SPECIFICATIONS ......................................................................................................................... 10
7. IN CASE OF DIFFICULTY ............................................................................................................ 10
8. ERROR DISPLAYS ........................................................................................................................11
2. PRECAUTIONS
1. This unit is applicable for on-road 4 wheel
Handling Compact Discs
vehicle purpose only. Use for tractor, fork
truck, bulldozer, off road vehicle, 2 or 3
wheel motor bicycle, marine boat or other
special purpose vehicle is not appropriate.
Use only compact discs bearing the
mark.
Do not play heart-shaped, octagonal, or other
2. When the inside of the car is very cold and
specially shaped compact discs.
the player is used soon after switching on the
heater moisture may form on the disc or the
optical parts of the player and proper
Handling
• Compared to ordinary music CDs, CD-R and
playback may not be possible. If moisture
CD-RW discs are both easily affected by high
forms on the disc, wipe it off with a soft cloth.
temperature and humidity and some of CD-R
If moisture forms on the optical parts of the
and CD-RW discs may not be played.
player, do not use the player for about one
Therefore, do not leave them for a long time in
the car.
hour. The condensation will disappear
naturally allowing normal operation.
• Never stick labels on the surface of the
3. Driving on extremely bumpy roads which
compact disc or mark the surface with a pencil
cause severe vibration may cause the sound
or pen.
to skip.
INFORMATION FOR USERS:.
LCD Screen
CHANGES OR MODIFICATIONS TO THIS
In extreme cold, the screen movement may
slow down and the screen may darken, but this
is normal. The screen will recover when it
returns to normal temperature.
PRODUCT NOT APPROVED BY THE
MANUFACTURER WILL VOID THE
WARRANTY.
DB158R/BD159R
3
3. DCP
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
Storing the DCP in the DCP Case
Hold the DCP, in the orientation as shown in the
figure below, and put it into the supplied DCP
case. (Ensure the DCP is in the correct
orientation.)
We recommend taking the DCP with you when
leaving the car.
DCP
Removing the DCP
1. Press the [SRC] button for 1 second or
longer to switch off the power.
2. Press in the [RELEASE] button.
DCP case
[RELEASE] button
CAUTION
• The DCP can easily be damaged by
shocks. After removing it, be careful not to
drop it or subject it to strong shocks.
• When the Release button is pressed and
the DCP is unlocked, the car’s vibrations
may cause it to fall. To prevent damage to
the DCP, always store it in its case after
detaching it. (See figure below.)
∗ The DCP is unlocked
3. Remove the DCP.
• The connector connecting the main unit
and the DCP is an extremely important
part. Be careful not to damage it by
pressing on it with fingernails, pens,
screwdrivers, etc.
DCP Rear Panel
Main Unit Front
DCP
Attaching the DCP
1. Insert the right side of the DCP into the main
unit.
DCP
connector
Main unit connector
2. Insert the left side of the DCP into the main
unit.
Note:
2.
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
DCP
1.
4
DB158R/BD159R
4. NOMENCLATURE
Note:
• Be sure to read this chapter referring to the front diagrams of chapter “1. CONTROLS” on page 2.
Names of the Buttons and their Functions
[RELEASE] button
• Press the [RELEASE] button to unlock the
[AF] button
• Press the button to turn on or off the AF
DCP.
(Alternative Frequency) function.
• When the button is pressed and held,
Regional function can select ON or OFF.
[ROTARY] knob
• Adjust the volume by turning the knob
clockwise or counterclockwise.
[BND] button
• Use the knob to perform various settings.
• Switches the band, or seek tuning or manual
tuning while in the radio mode.
[CD SLOT]
• CD insertion slot.
• Plays a first track while in the CD mode.
[SRC] button
• Press the button to turn on the power.
[PTY] button
• Use the button to set the PTY (Programme
Type) standby mode or PTY items.
Press and hold the button for 1 second or
longer to turn off the power.
[Q] button
• Switches the operation mode among the radio
mode, etc.
• Ejects a CD when it is loaded into the unit.
[DIRECT] button
• Stores a station into memory or recall it
directly while in the radio mode.
[A-M] button
• Press and hold the button for 1 second or
longer to switch the MAGNA BASS EXTEND
on/off.
[RPT] button
• Plays repeatedly while in the CD mode.
• Use the button to switch to the audio mode
(bass/treble, balance/fader).
[RDM] button
• Performs random play while in the CD mode.
[Z] button
• Use the button to select one of the three types
of sound characteristics already stored in
memory. (Z-Enhancer)
[SCN] button
• Performs scan play for 10 seconds for each
track while in the CD mode.
[a], [d] button
• Selects a station while in the radio mode or
selects a track when listening to a CD.
[SS] button
• Press the [SS] button while keeping the [BND]
button pressed, to turn the screen saver
function on or off.
• Press and hold the button for 1 second or
longer to switches the fast-forward/fast-
backward.
[
] button
[P/A] button
• Plays or pauses a CD while in the CD mode.
• Performs preset scan while in the radio mode.
When the button is pressed and held, auto
store is performed.
[TA] button
• Use the button to set the TA (Traffic
Announcement) standby mode.
[DISP] button
• Press the [DISP] button while keeping the
[BND] button pressed, to switch the display
indication (Main display, clock display).
DB158R/BD159R
5
5. OPERATIONS
Basic Operations
CAUTION
Be sure to lower the volume before switching
off the unit power or the ignition key. The unit
remembers its last volume setting.
∗ If the display is changed by other button
operation when the clock (CT) is displayed,
the clock display returns automatically after
the operation.
Setting the Z-Enhancer
This unit are provided with 3 types of sound
tone effects stored in memory. Select the one
you prefer.
Turning on/off the power
1. Press the [SRC] button to turn on the power.
2. Press and hold the [SRC] button for 1 second
1. Each time you press the [Z] button, the tone
or longer to turn off the power for the unit.
effect changes in the following order:
Selecting a mode
“Z-ENHANCER 1” (bass emphasized) ➜
1. Press the [SRC] button to change the
operation mode.
“Z-ENHANCER 2” (treble emphasized) ➜
“Z-ENHANCER 3” (bass and treble
emphasized) ➜ “Z-EHCR OFF” (no sound
effect) ➜ “Z-ENHANCER 1”...
Radio mode ➜ CD mode ➜ Radio mode...
Adjusting the volume
1. Turning the [ROTARY] knob clockwise
increases the volume; turning it
Turning on/off MAGNA BASS
EXTEND
1. Press and hold the [A-M] button for 1 second
or longer to turn the MAGNA BASS EXTEND
and “M-B EX” in the display lights on or off.
counterclockwise decreases the volume.
∗ The volume level is from 0 (minimum) to
33 (maximum).
Audio Mode Adjustments
CT (Clock Time) function
1. Press the [A-M] button to select the
adjustment mode. The mode switches as
follows each time the [A-M] button is pressed:
1. Press and hold the [BND] button, and then
press the [DISP] button, the display switches
to CT (Clock Time) from RDS data.
BASS ➜ TREB ➜ BAL ➜ FAD ➜ Previous
mode
Triggered audio mute for cellular
∗ When the Z-Enhancer function is turned
on, BASS (bass) and TRE (treble) cannot
be selected.
telephones
This unit requires special wiring to mute the
audio signal automatically when a cellular
telephone rings in the car.
2. Turning the [ROTARY] knob to adjust the
selected audio mode.
1. Press and hold the [BND] button, and then
• BASS (bass): Adjustment range; –7 to +7
press the [
] to select the “TEL MUTE” or
“TEL OFF”.
• TREB (treble): Adjustment range; –7 to +7
TEL MUTE : mutes the audio sound.
TEL OFF : does not mute the audio sound.
•
BAL (balance):Adjustment range; L13 to R 13
• FAD (fader): Adjustment range; F12 to R12
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Illumination dimmer function
When the illumination line of this unit is connected
with the car-side illumination signal line, the
display illumination of this unit dims in connection
with turning on the car-side illumination.
∗ The display returns to the previous mode 7
seconds after the adjustment.
Switching display
Turning the screen saver function
1. Press and hold the [BND] button, and then
press the [DISP] button to select the desired
display.
on or off
1. Press the [SS] button while keeping the
[BND] button pressed, to turn the screen
saver function on or off.
The display switches in the following order:
Main display ➜ Clock (CT) display ➜ Main …
6
DB158R/BD159R
Radio Operations
Listening to the radio
Manual memory
1. Press the [SRC] button and select the radio mode.
The frequency or PS appears in the display.
∗ PS: Programme service name
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
2. Press the [BND] button and select the radio
band. Each time the button is pressed, the radio
reception band changes in the following order:
Auto store
1. Press the [BND] button and select the
desired band (FM or AM (MW/LW)).
F1 (FM1) ➜ F2 (FM2) ➜ F3 (FM3) ➜
AM (MW/LW) ➜ F1 (FM1)...
3. Press the [a] or [d] button to tune in the
desired station.
2. Press and hold the [P/A] button for 2
seconds or longer. The stations with good
reception are stored automatically to the
preset channels.
∗ There are 3 types of tuning mode available,
seek tuning, manual tuning and preset tuning.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
∗ If auto store is performed in the FM bands,
the stations are stored in FM3 even if FM1
or FM2 was chosen for storing stations.
GDX SEEK “DX”
Preset scan
1. Press the [P/A] button.
Press the [a] or [d] button to automatically
seek a station.
2. When a desired station is tuned in, press the
[P/A] button again to continue receiving that
station.
GLOCAL SEEK “LO”
If you press and hold the [a] or [d] button for
1 second or longer, local seek tuning is carried
out. Broadcast stations with good reception
sensitivity are selected.
Note:
• Be careful not to press and hold the [P/A] button
for 2 seconds or longer, otherwise the auto store
function is engaged and the unit starts storing
stations.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
1. Press the [BND] button and select the
desired band (FM or AM (MW/LW)).
∗ If “MANU” is not lit in the display, press
and hold the [BND] button for 1 second or
longer. “MANU” is lit in the display and
manual tuning is now available.
RDS Operations
RDS (Radio Data System)
This unit has a built-in RDS decoder system that
supports broadcast stations transmitting RDS
data.
2. Tune into a station.
When using the RDS function, always set the
radio to FM mode.
GQuick tuning:
Press and hold the [a] or [d] button for 1
second or longer to tune in a station.
AF (Alternative Frequency) function
The AF function switches to a different
frequency on the same network in order to
maintain optimum reception.
GStep tuning:
Press the [a] or [d] button to manually tune
in a station.
∗ The factory default setting is “ON”.
GSwitching ON/OFF the AF function
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio
stations in memory.
1. Press the [AF] button to turn on/off the AF
function.
∗ If the reception of the current broadcast
station deteriorates, “SEARCH” appears in
the display and the radio searches for the
same programme on another frequency.
1. Press the [BND] button and select the
desired band (FM or AM (MW/LW)).
2. Press the corresponding [DIRECT] button to
recall the stored station.
∗ Press and hold one of the [DIRECT]
buttons for 2 seconds or longer to store
that station into preset memory.
DB158R/BD159R
7
RDS Operations
REG (Regional programme) function
When the REG function is ON, the optimum
regional station can be received. When this
function is OFF, if the regional station area
switches as you drive, a regional station for that
region is received.
Auto store function for TP stations
With “TA” lit in the display, press and hold the
[P/A] button for 2 seconds or longer. The TP
stations with the good reception sensitivity are
stored into preset memory.
∗ Even if you select F1 (FM1) or F2 (FM2), a TP
station is stored into memory for F3 (FM3).
Notes:
• This function is disabled when a national station
such as BBC R2 is being received.
• The REG function ON/OFF setting is valid when
the AF function is ON.
PTY (Programme Type) function
This function enables you to listen to a
broadcast of the selected programme type when
it starts even if the unit is on a function mode
other than radio.
GSwitching the REG function ON/OFF
1. Press and hold the [AF] button for 1 second
∗ Some countries do not yet have PTY
or longer to turn on/off the REG function.
broadcast.
Manually tuning a regional station
in the same network
1. This function is valid when the AF function is
ON and the REG function is OFF.
GSetting the PTY standby mode
When you press the [PTY] button, the PTY
standby mode is turned on. The PTY item name
appears in the display.
Note:
GCancelling the PTY standby mode
• This function can be used when a regional
broadcast of the same network is received.
2. Press any one of the [DIRECT] buttons to
When you press and hold the [PTY] button for 1
second or longer, the PTY standby mode is
cancelled.
call out the regional station.
GCancelling a PTY interrupt broadcast
3. If the reception condition of the called out
station is bad, press the [DIRECT] button of
the same number. The unit receives a local
station on the same network.
Press the [PTY] button during the PTY interrupt
broadcast, the PTY interrupt is cancelled and
the unit returns to PTY standby mode.
Selecting PTY
TA (Traffic Announcement) function
1. When you press the [PTY] button, the unit
goes into PTY select mode.
GSetting the TA standby mode
If you press the [TA] button when only “TP” is lit
in the display, “TP” and “TA” light in the display
and the unit is set into the TA standby mode
until a traffic announcement is broadcast. When
a traffic announcement broadcast starts, “TRA
INFO” appears in the display. If you press the
[TA] button while a traffic announcement
broadcast is being received, the traffic
announcement broadcast reception is cancelled
and the unit goes into the TA standby mode.
2. Press any one of the [DIRECT] buttons.
Alternatively, turn the [ROTARY] knob
clockwise or counterclockwise to select the
desired PTY.
3. The PTY select mode is cancelled
automatically 7 seconds after a PTY is
selected.
PTY seek
1. When you press the [PTY] button, the PTY
select mode is turned on.
GCancelling the TA standby mode
With “TP” and “TA” lit in the display, press the
[TA] button. The “TA” in the display goes off and
the TA standby mode is cancelled.
2. Select PTY.
3. Press the [a] or [d] button. If you press
the [d] button, the unit seeks a PTY
broadcast moving up the frequencies; if you
press the [a] button, it seeks moving down
the frequencies.
∗ If “TP” is not lit, pressing the [TA] button
searches for a TP station.
GSearching for a TP station
When “TP” is not lit, if you press the [TA] button,
“TA” in the display lights and the unit
automatically receives a TP station.
∗ If no station with the selected PTY
broadcast can be received, the unit returns
to the PTY select mode.
8
DB158R/BD159R
RDS Operations
CD Operations
PTY preset memory
1. When you press the [PTY] button, the PTY
select mode is turned on.
Listening to a CD already inserted
Press the [SRC] button to select the CD mode.
Play starts automatically.
2. Turn the [ROTARY] knob clockwise or
Pausing play
counterclockwise to select the desired PTY.
1. Press the [
] button to pause play.
The 29 types of PTY below can be selected.
2. To resume CD play, press the [
again.
] button
NEWS, AFFAIRS (Today’s events), INFO
(Information), SPORT, EDUCATE
(Education), DRAMA, CULTURE,
Ejecting a CD
1. Press the [Q] to eject the CD. Take it out
SCIENCE, VARIED (Variety), POP M (Pop
music), ROCK M (Rock music), EASY M
(Easy music), LIGHT M (Light music),
CLASSICS, OTHER M (Other music),
WEATHER, FINANCE, CHILDREN (For
children), SOCIAL, RELIGION, PHONE IN,
TRAVEL, LEISURE, JAZZ, COUNTRY,
NATION M (Nation music), OLDIES, FOLK M
(Folk music), DOCUMENT (Documentaries)
from the ejected position.
Note:
• If a CD is left in the ejected position for 15 seconds,
the CD is automatically reloaded (Auto reload).
Track-up / track-down
1. Press the [a] or [d] button to select the
desired track.
Fast-forward/fast-backward
1. Press and hold the [a] or [d] button for 1
second or longer to quickly more fastward or
backward through the disc.
3. If you press and hold any one of the
[DIRECT] buttons for 2 seconds or longer,
the selected PTY is stored into that preset
channel memory.
Top function
Emergency broadcast
1. Press the [BND] button to play the first track
(track No. 1) on the disc.
If an emergency broadcast is received, all the
function mode operations are stopped.
“ALARM” appears in the display and the
emergency broadcast can be heard.
Scan play
The scan play locates and plays the first 10
seconds of each track on a disc automatically.
GCancelling an emergency broadcast
If you press the [AF] button, emergency
broadcast reception is cancelled.
1. Press the [SCN] button to start scan play.
“SCN” lights in the display.
2. To cancel the scan play, press the [SCN]
button again. “SCN” goes off from the display
and the current track continues to play.
Volume setting of TA, emergency
broadcast (ALARM) and PTY
1. During a TA, ALARM or PTY interrupt, turn
the [ROTARY] knob clockwise or
Repeat play
The repeat play continuously plays the current
track.
counterclockwise to set the volume to the
desired level (0 to 33).
1. Press the [RPT] button. “RPT” lights in the
CD Operations
Loading a CD
Insert a CD into the centre of the CD SLOT with
the labeled side facing up. “LOADING” appears
in the display, the CD enters into the slot, and the
play starts.
display and the current track is repeated.
2. To cancel the repeat play, press the [RPT]
button again. “RPT” goes off from the display
and normal play resumes.
Random play
The random play selects and plays individual
tracks on a disc in no particular order.
Notes:
• Do not put your hand, fingers, or foreign objects
into the CD SLOT.
• If a CD has already been loaded, another CD
cannot be inserted. Do not insert another one
forcefully.
1. Press the [RDM] button. “RDM” lights in the
display, an individual track is selected
randomly and play begins.
2. To cancel the random play, press the [RDM]
button again. “RDM” goes off and normal
play resumes.
• Discs not bearing the
mark cannot be
played with the unit. CD-ROMs cannot be played.
DB158R/BD159R
9
6. SPECIFICATIONS
Radio section
Tuning System: PLL synthesizer tuner
General
Output Power: 4 ✕ 25 W (DIN 45324, +B=14.4V)
Receiving Frequencies:
Power Supply Voltage:
FM : 87.5 to 108 MHz (0.05 MHz steps)
MW : 531 to 1602 kHz (9 kHz steps)
LW : 153 to 279 kHz (3 kHz steps)
14.4 V DC (10.8 to 15.6 V allowable),
negative ground
Power Consumption: Less than 15 A
Speaker Impedance: 4 Ω (4 to 8 Ω allowable)
Auto Antenna Rated Current: 500 mA or less
Weight:
CD player section
System: Compact disc digital audio system
Frequency Response: 10 Hz to 20 kHz ( 1 dB)
Signal to Noise Ratio: 100 dB (1 kHz) IHF-A
Dynamic Range: 93 dB (1 kHz)
Main unit: 1.2 kg
Dimensions:
Main unit : 178 (W) ✕ 50 (H) ✕ 155 (D) mm
Distortion: 0.03%
Note:
• Specifications and design are subject to change without notice for further improvement.
7. IN CASE OF DIFFICULTY
Problem
Cause
Solution
Power does not turn on.
(No sound is produced.)
Fuse is blown.
Replace with a fuse of the same amperage. If
the fuse blows again, consult your store of
purchase.
Incorrect wiring.
Consult your store of purchase.
Compact disc cannot be
loaded.
Another compact disc is
already loaded.
Eject the compact disc before loading the new
one.
Sound skips or is noisy.
Compact disc is dirty.
Clean the compact disc with a soft cloth.
Compact disc is heaviiy
scratched or warped.
Replace with a compact disc with no scratches.
Sound is bad directly after
power is turned on.
Water droplets may form on
the internal lens when the car
is parked in a humid place.
Let dry for about 1 hour with the power on.
Nothing happens when
buttons are pressed.
Display is not accurate.
Microprocessor has
malfunctioned due to noise,
etc.
Turn off the power, then press the Release
button and remove the DCP.
Press the reset button for about 2 seconds with
a thin rod.
Reset button
DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with
are dirty. cleaning alcohol.
10
DB158R/BD159R
8. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display
ERROR 2
Cause
Measure
A CD is caught inside the CD deck and is
not ejected.
This is a failure of CD deck’s mechanism and
consult your store of purchase.
ERROR 3
A CD cannot be played due to scratches,
etc.
Replace with a non-scratched,
non-warped-disc.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
DB158R/BD159R
11
Clarion Co., Ltd.
All Rights Reserved. Copyright © 2004: Clarion Co., Ltd.
Printed in China / Imprimé en Chine / Gedruckt in China / Stampato in Cina
Gedrukt in China / Impreso en China / Tryckt i Kina / Impresso na China
PE-2725E
280-8131-00
2004/12
|