Casio DQ 542 User Manual

MA0508-EB  
Operation Guide DQ-542/542B  
3 MIN/DATE button  
ILLUSTRATION  
Pressing this button while “TM” is selected by the Mode switch 5 advances the minute setting.  
Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the day setting.  
4 HR/MONTH button  
Pressing this button while “TM” is selected by the Mode switch 5 advances the hour setting.  
Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the month setting.  
5 Mode switch  
NORMAL: For normal use  
AL: For adjusting the alarm setting  
TM: For adjusting the time setting  
CALENDAR: For adjusting the date setting  
6 Alarm Mode selector  
SNZ: Snooze alarm on  
ON: Alarm on  
OFF: Alarm off  
7 Battery  
SETTING THE CLOCK  
1. Slide the Mode switch 5 to “TM”. This  
causes the current time to flash on the  
display.  
Press to advance the Press to advance the  
hour setting. minute setting.  
Press to toggle between  
12-hour and 24-hour  
timekeeping.  
2. Use the 12 • 24/YEAR button 2, MIN/  
DATE button 3, and HR/MONTH  
button 4 to set the time. Holding down  
the MIN/DATE button 3 or HR/  
MONTH button 4 changes the  
corresponding setting at high speed.  
Make sure you set the correct am/pm  
time if you are using 12-hour  
PM indicator  
timekeeping. The PM indicator indicates  
PM times, while nothing is indicated for  
AM times.  
Hour  
Minutes  
The seconds count reverts to 00  
automatically whenever you finish  
adjusting the minute setting.  
3. Slide the Mode switch 5 to  
“CALENDAR”. This causes the current  
date to flash on the display.  
Press to advance the Press to advance the  
month setting. day setting.  
Press to advance the  
year setting.  
4. Use the 12 • 24/YEAR button 2, MIN/  
DATE button 3, and HR/MONTH  
button 4 to set the date. Holding down  
any button advances the corresponding  
setting at high speed.  
You can set the year in the range of 2004  
to 2039.  
A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the  
clock.  
Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.  
Alarm Off  
Alarm On  
Snooze Alarm On  
Year  
Month  
PM indicator  
Alarm time  
Snooze on indicator  
Day  
5. Slide the Mode switch 5 to “NORMAL”. This will cause the figures on the display to  
stop flashing.  
Current time  
(Hour, minutes)  
Date  
(month – day)  
Alarm on indicator  
Alarm on indicator  
GENERAL GUIDE  
1 SNOOZE/LIGHT button  
Press this button to illuminate the display for about three seconds.  
Pressing this button while the alarm is sounding stops the alarm.  
2 12 • 24/YEAR button  
Press this button to toggle between 12-hour and 24-hour timekeeping.  
Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the year setting.  
1

National Instruments Computer Accessories VirtualBench User Manual
MTD 290 002 000 User Manual
Mr Coffee SB User Manual
Maxtor 25 inch Low profile Disc Drives LD25 Series User Manual
Kenwood KDC 219 User Manual
Kenmore 10080006 User Manual
Iomega FireWire 800 User Manual
Grindmaster 73010 User Manual
Emerson CKD9905 User Manual
Dell Computer Drive T3500 User Manual