Breville BKC600XL User Manual

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page a1

Breville is a registered trademark of Breville Pty. Ltd.

Breville Customer Service Center

US Customers

19400 S. Western Ave

✉

Torrance

CA 90501-1119

Service Center: 1 (866) BREVILLE

☎

Email askus@brevilleUSA.com

www.breville.com

Canada Customers

Anglo Canadian

✉

2555, Avenue Aviation

Pointe-Claire (Montréal) Québec

H9P 2Z2

Service Center: 1 (866) BREVILLE

☎

Fax (514) 683-5554

Email askus@breville.ca

www.breville.com

Keurig, Keurig Brewed, Brewing Excellence One Cup at a Time,

and K-Cups are trademarks or registered trademarks of Keurig, Incorporated.

Covered by U.S. Patents Numbers 7,165,488; D513572 and 5,840,189;

and other U.S. and foreign patents pending.

Due to continual improvements in design or otherwise, the product you purchase

may differ slightly from the one illustrated in this booklet.

Model BKC600XL Issue 2/07 Packaging Code: NA

Model BK

FILENA

BREVIL

A5 Inst

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 2

Contents

Page

Breville recommends safety first

Know your Breville Gourmet Single Cup Brewer™

Operating your Breville Gourmet Single Cup Brewer™

Installing the water filter

One-time priming process

Brewing a K-Cup

Brewing with the My K-Cup

Stopping the brew process

Brewing hot water

Refilling the water tank

Purging the brewer

Menu and programming options

Setting the ‘CLOCK SET’ feature

Setting the ‘ON-OFF TIME’ feature

Setting the ‘AUTO OFF’ feature

Setting the ‘BREW TEMP’ feature

Setting the ‘BREW SIZE’ feature

Care and cleaning

on the

Cleaning the brewer housing

Your Br

enginee

Enjoy y

of Keur

Cleaning the K-Cup holder

Cleaning the My K-Cup

Cleaning the water tank and lid

Cleaning the water filter

Descaling the brewer

Storage

Trouble shooting

For mo

orderin

1-866-

One year limited warranty

French

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 3

Congratulations

on the purchase of your new Breville Gourmet Single Cup Brewer™

Your Brewer has been jointly designed and

engineered by Breville-Australia and Keurig-USA.

Enjoy your Breville Brewer with over 150 varieties

of Keurig K-Cups from 13 gourmet partners.

For more information on K-Cups or K-Cup

ordering, call Breville Customer Service on

1-866-BREVILLE or visit www.breville.com

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 4

Breville recommends safety first

• Do not,

the third

use an a

IMPORTANT SAFEGUARDS

We at Breville are very safety conscious. We design and manufacture consumer products with the safety of you,

our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any

electrical appliance and adhere to the following precautions:

• Consult

instructi

doubt ex

properly

READ ALL INSTRUCTIONS AND SAVE THESE FOR

FUTURE REFERENCE

• Regularl

actual a

if damag

malfunc

applianc

1-866-B

adjustm

• This appliance is for household use only.

Chamber Head, and the other in the base of the

K-Cup Holder. To avoid risk of injury, do not

put your fingers in the Brewing Chamber or

K-Cup Holder.

• Do not use this appliance for anything other than

its intended use. Do not use in moving vehicles or

boats. Do not use outdoors.

• There is extremely hot water in the K-Cup Holder

• To protect against fire, electrical shock and injury

to persons, do not immerse the appliance, cord or

plug in water or any other liquid.

during the brewing process. To avoid risk of injury,

do not raise the Safety Locking Arm or open the

Brewing Chamber during the brewing process.

• For any

Breville

• Do not leave the appliance unattended when in use.

• To turn off the appliance, press and release the

Power Switch on the lower back, right side of the

Brewer to the ‘OFF’ status and then remove the

plug from the wall outlet.

• Close supervision is necessary when the appliance

is used by or near children.

SHOR

• Always use the appliance on a dry, level surface.

Your Brevi

or property

children to

marked el

the applian

can be pu

grounding

• Do not place this appliance on or near a hot gas

or electric burner, or where it could touch a

heated oven.

• Always switch the appliance to the ‘OFF’ status and

then remove the plug from the wall outlet when the

appliance is not being used and before cleaning.

Allow the appliance to cool before reassembling or

removing parts and before cleaning the appliance.

• Do not touch hot surfaces. Use handles and knobs

where available.

• Do not let the cord hang over the edge of a table or

counter, touch hot surfaces or become knotted.

• Strictly follow the Care and Cleaning instructions

(page 22).

• The use of accessory attachments not

recommended by Breville may cause a risk of

injury to persons, fire or electric shock.

• This appliance is equipped with a power cord

having a grounding wire with a grounding plug.

The appliance must be grounded using a 3-hole

properly grounded outlet. In the event of an

electrical short circuit, grounding reduces the risk

of electrical shock.

• Do not overfill the Water Tank.

• Always keep the Water Tank Lid on the Water Tank

unless you are refilling it.

• Use only water in this appliance. Do not put any

other liquids or foods in the Water Tank except as

instructed in Care and Cleaning (page 23).

• If the outlet is a standard 2-prong wall outlet, it

is your personal responsibility and obligation to

have it replaced with a properly grounded 3-prong

wall outlet.

• There are two sharp needles that puncture the

K-Cup . One on the underside of the Brewing

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 5

• Do not, under any circumstances, cut or remove

the third (ground) prong from the power cord or

use an adapter.

Your Breville appliance comes with the unique

Assist™ Plug, conveniently designed with a finger

hole in the power plug for easy and safe removal

from the wall outlet. For safety reasons it is

recommended you plug your Breville appliance

directly into its own electrical outlet on a

dedicated circuit separate from other appliances.

If the electric circuit is overloaded with other

appliances, your Brewer may not function

properly. Use in conjunction with a power strip or

extension cord is not recommended.

ety of you,

ing any

• Consult a qualified electrician if the grounding

instructions are not completely understood, or if

doubt exists as to whether the appliance is

properly grounded.

• Regularly inspect the supply cord, plug and

actual appliance for any damage. Do not operate

if damaged in anyway or after the appliance

malfunctions. Immediately cease use of the

appliance and call Breville Customer Service at

1-866-BREVILLE for examination, repair or

adjustment.

of the

not

Note

Holder

of injury,

en the

• For any maintenance other than cleaning, call

Breville Customer Service at 1-866-BREVILLE.

cess.

se the

e of the

ve the

SHORT CORD INSTRUCTIONS

Your Breville appliance is fitted with a short power supply cord as a safety precaution to prevent personal injury

or property damage resulting from pulling, tripping or becoming entangled with a longer cord. Do not allow

children to use or be near this appliance without close adult supervision. If an extension cord is used, (1) the

marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of

the appliance, (2) the cord should be arranged so that it will not drape over the countertop or tabletop where it

can be pulled on by children or tripped over unintentionally and (3) the extension cord must include a 3-prong

grounding plug.

status and

when the

eaning.

mbling or

ppliance.

uctions

cord

plug.

3-hole

SAVE THESE INSTRUCTIONS.

FOR HOUSEHOLD USE ONLY.

the risk

tlet, it

ion to

3-prong

TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT REMOVE THE BASE PANEL.

NO USER SERVICEABLE PARTS ARE INSIDE. REPAIR SHOULD BE DONE ONLY BY

AUTHORIZED PERSONNEL ONLY.

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 6

Know your Breville Gourmet Single Cup Brewer^™

A Water tank lid

Drip tray plate

K Brewing chamber head

L Brewing chamber

P My K-C

Q My K-C

R My K-C

S My K-C

B Water tank

G Drip tray level indicator

C Upper filter holder

D Replaceable charcoal filter

E Lower filter holder

H Drip tray

M LCD screen

K-Cup holder

N Control panel

Safety locking arm

O My K-Cup /K-Cup holder storage

Power S

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 7

™

P My K-Cup measuring scoop

To order replacement Charcoal Filters, call

Breville Customer Service on 1-866-BREVILLE or

visit www.breville.com

Q My K-Cup lid

R My K-Cup filter basket

S My K-Cup holder

der storage

Power Switch

Note

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 8

Operating your Breville Gourmet Single Cup Brewer^™

2. Remove the Water Tank Lid.

Installing the water filter

Replace

60 tank

3. Rinse the Water Tank with fresh water and

For the best tasting gourmet coffee, tea or hot cocoa,

Breville recommends using bottled or filtered water.

replace back onto the Brewer.

To order

Breville

visit ww

4. Remove the Upper and Lower Filter Holder and

The Water Filter provided with the Brewer can

significantly reduce substances that affect the smell

and taste of water such as free chlorine, certain

pesticides and organic impurities as well as traces of

heavy metals.

Charcoal Filter from the polybag. Unwrap the

Charcoal Filter from its protective plastic.

We reco

choose n

2 month

smell an

5. Soak the Charcoal Filter for 5 minutes then rinse

for 30 seconds. It is normal to see a grey residue

after soaking the filter.

6. Wash the Lower Filter Holder, ensuring the

stainless steel mesh is free of residue.

The Water Filter can be removed from the Brewer.

If you choose to install the Water Filter, it is

recommended to replace the Charcoal Filter

every 2 months or 60 tank refills, more often if

you have hard water.

7. Insert the Charcoal Filter into the Upper Filter

Holder, then attach the Lower Filter Holder so it

locks into place.

One-tim

Priming fil

the brewin

it has been

We recommend removing the Water Filter if using

filtered water, or if you choose not to replace the

Charcoal Filter every 2 months, as the filter may

clog and affect the smell and taste of the water.

If the Br

below fr

hours to

A frozen

properly

If you choose not to install the Water Filter, you

are ready to start the One-time Priming Process

(page 9).

Note

Follow these steps each time you install a new

Charcoal Filter to ensure it filters optimally.

1. Unwra

into a

1. Remove the Water Tank from the Brewer by

gripping the handle located on the left side of the

Water Tank, then lift upwards.

2. Place

drip tr

8. Set the date dial on the Upper Filter Holder

2 months ahead. This will remind you when the

Charcoal Filter will need to be replaced.

accom

3. Fill the

approx

The W

9. Place the assembled Filter Holder into the Water

Tank, aligning so the date dial is visible from

outside the Tank. Push down hard on the

assembled Filter Holder until it snaps into place.

10. Your Brewer is ready for the one-time

priming process.

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 9

wer^™

4. Press and release the Power Switch located on

Replace the Charcoal Filter every 2 months, or

60 tank refills, more if you have hard water.

the lower back, right side of the Brewer. The

Power Switch is spring loaded and will return to

its original position.

and

To order replacement Charcoal Filters, call

Breville Customer Service on 1-866-BREVILLE or

visit www.breville.com.

der and

ap the

5. The Water Tank LED will illuminate. The LCD

screen will illuminate and indicate ‘PRIME’. The

‘BREW’ button will illuminate and flash.

We recommend removing the Water Filter if you

choose not to replace the Charcoal Filter every

2 months, as the filter may clog and affect the

smell and taste of the water.

hen rinse

ey residue

the

Note

Filter

der so it

One-time priming process

Priming fills the internal tank with water and cleanses

the brewing system. You cannot use your Brewer until

it has been primed for its first use.

If the Brewer has been exposed to temperatures

below freezing, allow the Brewer at least two

hours to reach room temperature before priming.

A frozen or extremely cold Brewer will not prime

properly and can cause damage.

If the Water Tank is empty or not in place on the

Brewer, the Water Tank LED’s will flash and the

LCD screen will indicate ‘REFILL TANK’. None of

the control panel buttons will be active until

water is added to the Water Tank.

Note

1. Unwrap the power cord and plug the Brewer

into a grounded outlet.

Note

2. Place a 12 oz. mug on the Drip Tray Plate. The

drip tray plate and drip tray can be removed to

accomodate taller mugs and travel mugs.

6. A K-Cup^®should not be used for the one-time

priming process.

der

when the

7. Press the ‘BREW’ button.

3. Fill the Water Tank with water until it is

approximately 1 inch below the top edge.

The Water Tank can be filled in two ways:

8. The Brewer will automatically fill with water and

make a vibrating sound. This is normal. The

Brewer will then cease to vibrate and begin

heating the water. This entire process will take

approximately 4 minutes. The LCD screen will

indicate 'HEATING' during this period.

he Water

from

Remove the Water Tank Lid and pour

water directly into the Water Tank while it

is still attached to the Brewer, then replace

the Lid.

to place.

The Brewer will take about 4 minutes to heat up

during the priming process.

Remove the Water Tank Lid, then gripping

the handle located on the left side of the

Water Tank, lift upwards. Fill with water.

Place the Water Tank back onto the Brewer

and replace the Lid.

Note

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 10

Operating your Breville Gourmet Single Cup Brewer^™

continued

9. Once the water is heated, the LCD screen will no

longer indicate ‘HEATING’. The ‘BREW’ button will

illuminate and flash for up to 60 seconds.

12. Fill the Water Tank with water until it is

approximately 1 inch below the top edge.

6. Place

in the

13. The LCD screen will indicate ‘OPEN HEAD’. Open

the Brewing Chamber Head by raising and

lid or

10. Press the 'BREW' button. This will start a

cleansing brew which will complete the priming

sequence. The LCD screen will no longer

lowering the Safety Locking Arm completely. The

LCD screen will indicate ‘READY TO BREW’.

indicate 'PRIMING'. Hot water will flow into your

mug. When the flow stops, discard the hot water.

14. The one-time priming process is now complete

and you are ready for your first K-Cup brew

(page 10) or My K-Cup brew (page 12).

Brewing a K-Cup

1. Follow the instructions, Installing the Water Filter

(page 8) and the One-time Priming Process (page

9). The Brewer should be turned on and the

Water Tank should be filled and illuminated.

2. The LCD screen will indicate ‘READY TO BREW’.

There ar

K-Cup

The

and

buttons will illuminate and the

‘BREW’ button will illuminate and flash for up to

60 seconds.

Chambe

K-Cup

put your

K-Cup

If the ‘BREW’ button is not pressed in 60 seconds,

the LCD screen will indicate ‘OPEN HEAD’ and the

‘BREW’ button will be disabled to prevent accidental

activation. To re-activate the brew sequence, open

the Brewing Chamber Head by raising and lowering

the Safety Locking Arm completely.

11. The LCD screen will indicate ‘HEATING’ as the

Brewer heats the water for the next brew cycle.

Once the water is heated, the LCD screen may

indicate ‘REFILL TANK’.

7. Lower

Brewin

When

indica

button

illumin

Note

3. Place a cup or mug on the Drip Tray Plate. The

drip tray plate and drip tray can be removed to

accomodate taller mugs and travel mugs.

4. Raise the Safety Locking Arm. The Brewing

Chamber will open toward you.

5. Select a K-Cup .

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 11

™

continued

a) The LCD screen will indicate the default brew

size (7.25 oz.). To choose a different size,

6. Place the K-Cup in the K-Cup Holder (located

in the Brewing Chamber). Do not remove the foil

lid or puncture the K-Cup .

press the

button to go up in size or the

AD’. Open

and

button to go down in size.

etely. The

EW’.

Select from a stronger small cup (5.25 oz. serving),

a small mug (7.25 oz. serving), a large mug (9.25

oz. serving) or a travel mug (11.25 oz. serving).

omplete

brew

2).

The small mug (7.25 oz. serving) is the default

brew size. To program your favorite brew size, refer

to Setting the ‘BREW SIZE’ feature (page 20).

ater Filter

cess (page

the

Note

b) Once the brew size is selected, press the ‘BREW’

Button. The ‘BREW’ button will stop flashing, the

ated.

O BREW’.

and the

for up to

There are two sharp needles that puncture the

K-Cup . One on the underside of the Brewing

and

buttons will no longer be lit. The

LCD screen will indicate ‘BREWING’ and the

selected brew size.

Chamber Head and the other in the base of the

K-Cup Holder. To avoid risk of injury, do not

put your fingers in the Brewing Chamber or

K-Cup Holder.

conds,

nd the

Note

ccidental

e, open

owering

7. Lower the Safety Locking Arm to close the

Brewing Chamber Head over the K-Cup Holder.

When closed completely, the LCD screen will

indicate ‘READY TO BREW’. The

buttons will illuminate and the ‘BREW’ button will

illuminate and flash for up to 60 seconds

and

Note

ate. The

oved to

gs.

wing

If the ‘BREW’ button is not pressed in 60 seconds,

the LCD screen will indicate ‘OPEN HEAD’ and the

‘BREW’ button will be disabled to prevent accidental

activation. To re-activate the brew sequence, open

the Brewing Chamber Head by raising and lowering

the Safety Locking Arm completely.

Note

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 12

Operating your Breville Gourmet Single Cup Brewer^™

continued

8. The LCD screen will indicate ‘BREWING’, however

8. Use th

Filter B

coffee

tables

on the

tables

the am

prefer

If the ‘BREW’ button is not pressed in 60

there may be a short pause before the brewing

seconds, the LCD screen will indicate ‘OPEN

HEAD’ and the ‘BREW’ button will be disabled

to prevent accidental activation. To re-activate

the brew sequence, open the Brewing Chamber

Head by raising and lowering the Safety Locking

Arm completely.

process begins. The process lasts about 60

seconds and ends with a burst of air to remove

all liquid from the K-Cup .

There is extremely hot water in the K-Cup

Holder during the brewing process. To avoid risk of

injury, do not raise the Safety Locking Arm or open

the Brewing Chamber during the brewing process.

Note

the gr

there a

upper

Following the brew, the LCD screen will indicate

‘HEATING’ as the Brewer heats the water for the

next brew cycle. This process lasts about 15

seconds. The pump will make a vibrating sound.

This is normal.

3. Place a cup or mug on the Drip Tray Plate. The

drip tray plate and drip tray can be removed to

accomodate taller mugs and travel mugs.

to sea

4. Open the storage compartment located on top of

the Brewer by pressing the finger indent on the

1 level s

We reco

serving.

right side. Remove the My K-Cup accessory.

Note

5. Disassemble the My K-Cup accessory by

Or, if you

cup 5.25

removing the Lid from the Holder in a counter-

clockwise direction. Remove the Filter Basket

from the Holder.

9. Raise the Safety Locking Arm, remove and

dispose of the used K-Cup . Use caution as the

If you gr

K-Cup will be hot.

1. Start

Press

6. Wash the My K-Cup Lid, Filter Basket and

10. Enjoy your first cup of gourmet coffee, tea or

hot cocoa!

Holder in warm soapy water prior to first use.

Rinse and dry thoroughly.

2. Expe

brew

11. The LCD screen will indicate ‘READY TO BREW’,

7. Insert the Filter Basket into the Holder.

indicating that the next K-Cup can be inserted

3. Avoid

could

for the next brew cycle.

Brewing with the My K-Cup^®Accessory

poor

The Breville Gourmet Single Cup Brewer™ comes

with a My K-Cup accessory. The dishwasher safe,

reusable My K-Cup allows you to use your own

9. Raise

chamb

grind of coffee so you can adjust the amount and

type of coffee to suit your tastes. Along with the

included measuring scoop, this accessory

conveniently stores in the easy open compartment on

top of the brewer.

10. Place

Brewin

a. Rem

Cha

the

1. Follow the instructions, Installing the Water Filter

(page 8) and the One-time Priming Process (page

9). The Brewer should be turned on and the

Water Tank should be filled and illuminated.

b. Ins

the

2. The LCD screen will indicate ‘READY TO BREW’.

the

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 13

continued

8. Use the My K-Cup Measuring Scoop to fill the

Filter Basket with 1 level scoop maximum of

coffee. 1 level scoop is equivalent to 2

tablespoons. Alternatively, there are line markings

on the inside of the Filter Basket that indicate 1

tablespoon and 2 tablespoons so you can adjust

the amount of coffee to your personal

bled

vate

amber

Locking

preference. Do not fill the Filter Basket with

more than one level scoop of coffee or tamp

the grinds. Ensure the coffee remains loose and

there are no coffee grinds remaining on the

upper rim of the Filter Basket. Screw on the Lid

to seal.

Note

ate. The

oved to

gs.

There are two sharp needles used to puncture

on top of

t on the

essory.

the K-Cup and My K-Cup Holder. One in

1 level scoop = 2 tablespoons

the base of the K-Cup Holder, the other on the

We recommended this for the small mug 7.25 oz.

serving.

underside of the Brewing Chamber Head.

To avoid risk of injury, use caution when inserting

y by

ounter-

Basket

Or, if you like a stronger brew, select the small

cup 5.25 oz. serving.

or removing the K-Cup , K-Cup Holder, or My

K-Cup Holder.

If you grind your own beans:

Note

1. Start with a coarser grind similar to a French

Press grind.

and

st use.

11. Lower the Safety Locking Arm to close the

2. Experiment with grinds similar to drip

brewing grinds.

Brewing Chamber Head over the My K-Cup

Holder. When closed completely, the LCD screen

3. Avoid a fine espresso grind setting that

could clog the Filter Basket or result in

poor extraction.

will indicate ‘READY TO BREW’. The

buttons will illuminate and the ‘BREW’ button will

illuminate and flash for up to 60 seconds.

and

Note

9. Raise the Safety Locking Arm. The Brewing

chamber will open toward you.

10. Place the assembled My K-Cup Holder into the

Brewing Chamber. To do this:

a. Remove the K-Cup Holder from the Brewing

Chamber (10a). Store the K-Cup Holder in

the My K-Cup Storage compartment located

on top of the Brewer.

b. Insert the assembled My K-Cup Holder into

the Brewing Chamber (10b), ensuring to align

the arrow

on the My K-Cup Lid with

in the Brewing Chamber.

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 14

Operating your Breville Gourmet Single Cup Brewer^™

continued

a. The LCD screen will indicate the default brew

size (7.25 oz.). To choose a different size, press

12. The LCD screen will indicate ‘BREWING’, however

The My

ground

there may be a short pause before the brewing

process begins. The process lasts about 60

seconds and ends with a burst of air to remove

the

to go up in size or the

button to go

a) Use a

K-Cu

down in size.

all liquid from the My K-Cup Holder.

b) Use t

K-Cu

Select from a stronger small cup (5.25 oz. serving),

a small mug (7.25 oz. serving), a large mug (9.25

oz. serving) or a travel mug (11.25 oz. serving).

There is extremely hot water in the My K-Cup

Holder during the brewing process. To avoid risk

of injury, do not raise the Safety Locking Arm or

open the Brewing Chamber during the brewing

process.

After bre

the K-Cu

Brewing

The small mug (7.25 oz. serving) is the default

brew size. To program your favorite brew size,

refer to Setting the ‘BREW SIZE’ feature (page 20).

To replac

Locking

Insert K-

aligning

with the

Use caut

needle o

Head tha

Following the brew, the LCD screen will indicate

‘HEATING’ as the Brewer heats the water for the

next brew cycle. This process lasts about 15

seconds. The pump will make a vibrating sound.

This is normal.

Note

b. Once the brew size is selected, press the ‘BREW’

Button. The ‘BREW’ button will stop flashing, the

and

buttons will no longer be lit. The

Note

LCD screen will indicate ‘BREWING’ and the

selected brew size.

13. Raise the Safety Locking Arm, remove the

assembled My K-Cup Holder. Use caution as

the My K-Cup Holder will be hot.

Stopping

14. Disassemble the My K-Cup Holder by removing

To stop bre

and releas

Brewer to

hot cocoa

and the LE

longer be

‘ON-OFF T

panel butto

back on.

the Lid from the Holder in a counter-clockwise

direction. Remove the Filter Basket from the

Holder, discard the grounds and rinse out the

Filter Basket and Holder.

15. Enjoy your first cup of gourmet coffee, tea or

hot cocoa!

If the ‘BREW’ button is not pressed in 60

seconds, the LCD screen will indicate ‘OPEN

HEAD’ and the ‘BREW’ button will be disabled to

prevent accidental activation. To re-activate the

brew sequence, open the Brewing Chamber

Head by raising and lowering the Safety Locking

Arm completely.

You may

your nex

recomm

Brewing

then dis

the brew

Note

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 15

continued

’, however

brewing

t 60

Brewing hot water

The My K-Cup accessory is designed for

The Brewer is able to dispense a cup of hot water

for making hot chocolate in a packet, for use in

cooking, for making soups, etc. Follow the

ground coffee only. Do not:

a) Use a K-Cup or coffee pod in the My

remove

K-Cup™ Filter Basket.

instructions Brewing a K-Cup (page 10), without

b) Use the My K-Cup Filter Basket with the

inserting a K-Cup .

K-Cup® Holder

Cup

oid risk

Arm or

ewing

After brewing a hot cocoa K-Cup , or stopping

After brewing with the My K-Cup accessory,

the brew process mid-cycle, we recommend

running a hot water brew cycle.

the K-Cup Holder must be inserted into the

Brewing Chamber in order to brew a K-Cup .

To replace the K-Cup Holder, raise the Safety

Note

ndicate

for the

Locking Arm, and remove the My K-Cup Holder.

Insert K-Cup Holder into the Brewing Chamber,

on the K-Cup Holder

in the Brewing Chamber.

Use caution when doing this as there is a sharp

needle on the underside of the Brewing Chamber

Refilling the water tank

aligning the arrow

with the arrow

The LCD screen will indicate ‘REFILL TANK’ when the

water level in the Water Tank is low or if the Water

Tank has been removed.

sound.

Note

1. Fill the Water Tank with water until it is

approximately 1 inch below the top edge.

The Water Tank can be filled in two ways:

Head that punctures the K-Cup .

Note

tion as

a) Remove the Water Tank Lid and pour water

directly into the Water Tank while it is still

attached to the Brewer, then replace the Lid.

Stopping the brew process

removing

ckwise

m the

To stop brewing after the process has started, press

and release the Power Switch on the right side of the

Brewer to the ‘OFF’ status. The flow of coffee, tea or

hot cocoa will stop, the heating element will shut off

and the LED’s illuminating the Water Tank will no

longer be lit. The LCD screen will indicate the time,

‘ON-OFF TIME’ and ‘AUTO OFF’. None of the control

panel buttons will be active until the Brewer is turned

back on.

b) Remove the Water Tank Lid, then gripping the

handle located on the left side of the Water

Tank, lift upwards. Fill with water. Place the

Water Tank back onto the Brewer and replace

the Lid.

ut the

tea or

2. The LCD screen will indicate either:

a) ‘OPEN HEAD’. Raise and lower the Safety

Locking Arm completely.

b) ‘HEATING’ as the Brewer heats the water for

the next brew cycle. This process lasts about

15 seconds. The pump will make a vibrating

sound. This is normal.

You may get less coffee, tea or hot cocoa during

your next brew. After a terminated brew, we

recommend that you follow the instructions for

Brewing hot water (page 15). Your next brew will

then dispense the correct volume according to

the brew size you have selected.

3. Once the Safety Locking Arm is opened and

lowered, or the water is heated, the LCD screen

will indicate ‘READY TO BREW’, indicating the

brew cycle can begin. The

and

buttons

Note

will illuminate and the ‘BREW’ button will

illuminate and flash for up to 60 seconds.

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 16

Operating your Breville Gourmet Single Cup Brewer^™

continued

5. The LCD screen will indicate the default brew

size (7.25 oz. serving unless programmed

otherwise). Select the largest brew size

Setting t

If the ‘BREW’ button is not pressed in 60

seconds, the LCD screen will indicate ‘OPEN

HEAD’ and the ‘BREW’ button will be disabled to

prevent accidental activation. To re-activate the

brew sequence, open the Brewing Chamber Head

by raising and lowering the Safety Locking Arm

completely.

Setting the

the time w

(11.25 oz. serving) by pressing the

on the control panel.

button

You mus

TIME’ fe

6. Place a 12 oz. mug on the Drip Tray Plate. The

drip tray plate and drip tray can be removed to

accomodate taller mugs and travel mugs.

Do not remove the Water Tank during the

brewing process.

7. Press the ‘BREW’ button. Hot water will flow

into your mug. When the flow stops, discard the

hot water.

1. Press

option

Note

blinkin

8. Repeat this process 2 more times to completely

renew the water from inner tank.

2. Press

indica

Purging the brewer

3. Press

approp

indica

If the Brewer has not been used for more than one

week, you should renew the water from the inner

tank by purging the brewer.

1. If there is water in the Water Tank, remove the

Water Tank Lid, then gripping the handle located

on the left side of the Water Tank, lift upwards.

Discard the water, rinse and refill with bottled or

filtered water. Place the Water Tank back onto the

Brewer and replace the Lid.

2. If there is no water in the Water Tank, refill with

water. Place the Water Tank back onto the

Brewer and replace the Lid.

3. Ensure the Brewer is turned on. Raise and lower

the Safety Locking Arm on the Brewer without

inserting a K-Cup .

4. The LCD screen will indicate ‘READY TO BREW’

and the ‘BREW’ button will illuminate and flash.

4. Once t

‘OK’ b

that th

5. Press

approp

6. Once t

the ‘O

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 17

continued

Menu and programming options

t brew

7. To exit the menu programming options, press the

MENU’ button. Alternatively, press the button

Setting the ‘CLOCK SET’ feature

‘

Setting the clock is optional. When the clock is set,

the time will appear on the LCD screen.

to reach ‘EXIT MENU’ and press the ‘OK’ button.

The LCD screen will return to the main screen

and indicate the time selected.

button

You must set the clock if using the ‘ON-OFF

TIME’ feature.

te. The

oved to

gs.

If power is interrupted to the Brewer, the clock

will need to be reset. Programmed brew size and

brew temperature settings are remembered and

restored automatically. All other settings will be

restored automatically after the clock is reset.

Note

flow

card the

1. Press the ‘MENU’ button. The menu programming

options will appear on the LCD screen with a

blinking indicator on ‘CLOCK SET’.

mpletely

Note

2. Press the ‘OK’ button. The hour will blink,

indicating the hour is ready to be set.

Setting the ‘ON-OFF TIME’ feature

3. Press the

button to reach the

appropriate hour. If the hour has passed 12, the

indicator switches from AM to PM.

This feature allows you to program the specific time

when the Brewer will automatically turn on and/or

off. By programming your Brewer to automatically

turn on, you will not have to wait for the Brewer to

heat the water in the Water Tank. It will take the

Brewer approximately 3 / minutes to heat the water

from room temperate.

You must set the clock if using the ‘ON-OFF TIME’

feature.

An alternative to setting the ‘ON-OFF TIME’ feature is

to leave the Brewer on all the time. We recommend

this so your Brewer is always ready to brew a fresh

cup of gourmet coffee, tea or hot cocoa.

To turn the Brewer off at any time, press and

release the Power Switch on the lower back,

right side of the Brewer. The clock will remain on

if set, however you can not activate the brew

cycle. Press and release the Power Switch again

to restore power to the Brewer. You will have to

wait for the water to heat up before the Brewer

is ready to brew.

4. Once the appropriate hour is reached, press the

‘OK’ button. The minutes will blink, indicating

that the minutes are ready to be set.

5. Press the

button to reach the

appropriate minute.

6. Once the appropriate minute is reached, press

the ‘OK’ button. The LCD screen will return to the

menu programming options.

Note

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 18

continued

Menu and programming options

the indicator switches from AM to PM.

Setting the ‘ON-OFF TIME’ feature

continued

If you wa

‘OFF TIM

Switch o

Brewer t

the wate

to brew.

iii. Once the appropriate hour is reached, press

the ‘OK’ button. The minutes will blink,

indicating that the minutes are ready to

be set.

1. Press the ‘MENU’ button. The menu programming

options will appear on the LCD screen with a

blinking indicator on ‘CLOCK SET’.

2. Press the

button to reach ‘ON-OFF TIME’.

iv. Press the

button to reach the

3. Press the ‘OK’ button.

appropriate minute.

v. Once the appropriate minute is reached, press

the ‘OK’ button. The LCD screen will display

‘OFF TIME’, indicating that the time you wish

the Brewer to automatically turn off is ready to

be set.

Setting t

This featur

2 hours fro

Setting the ‘OFF TIME’

1. Press

option

i. Follow the instructions (ii to iv) for Setting the

‘ON TIME’.

blinkin

ii. Once the appropriate time is reached, press

the ‘OK’ button. The LCD screen will return to

the menu programming options

2. Press

3. Press

5. To exit the menu programming options, press the

4. Press

two op

‘MENU’ button. Alternatively, press the

button

to reach ‘EXIT MENU’ and press the ‘OK’ button.

The LCD screen will return to the main screen

and indicate whether you have activated the

‘ON-OFF TIME’ feature.

4. Press the

options:

button to see the two

a. ‘ON-OFF TIME’ will be ‘INACTIVE’, indicating that

the Brewer will not turn on or off automatically.

Press the ‘OK’ button to select this option.

The LCD screen will return to the menu

programming options.

b. ‘ON-OFF TIME’ will be ‘ACTIVE’, indicating the

Brewer will automatically turn on and/or off

according to the specific times you set.

Press the ‘OK’ button to select this option.

Setting the ‘ON TIME’

a) ‘AU

scr

Bre

the

scr

opt

i. The LCD screen will display ‘ON TIME’,

indicating that the time you wish the Brewer

to automatically turn on is ready to be set.

The hour will blink, indicting the hour is ready

to be set.

ii. Press the

button to reach the

appropriate hour. If the hour has passed 12,

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 19

b) ‘AUTO OFF’ will be ‘ACTIVE’ and the LCD

If you want to brew outside the ‘ON TIME’ and

‘OFF TIME’ selected, press and release the Power

Switch on the lower back, right side of the

Brewer to restore power. You will have to wait for

the water to heat up before the Brewer is ready

to brew.

screen will display ‘2 hr’, indicating the Brewer

will automatically turn off after 2 hours. Press

the ‘OK’ button. The LCD screen will return to

the menu programming options.

d, press

nk,

y to

5. To exit the menu programming options, press the

the

‘MENU’ button. Alternatively, press the

button

to reach ‘EXIT MENU’ and press the ‘OK’ button.

The LCD screen will return to the main screen

and indicate whether you have activated the

‘AUTO OFF’ feature.

Note

ed, press

display

ou wish

Setting the ‘AUTO OFF’ Feature

s ready to

This feature automatically turns the Brewer off after

2 hours from the last brew.

1. Press the ‘MENU’ button. The programming

options will appear on the LCD screen with a

blinking indicator on ‘CLOCK SET’.

etting the

d, press

return to

2. Press the

button to reach ‘AUTO OFF’.

3. Press the ‘OK’ button.

press the

button

4. Press the

two options:

button to see the

K’ button.

screen

d the

a) ‘AUTO OFF’ will be ‘INACTIVE’ and the LCD

screen will display - - -’, indicating that the

‘

Brewer will not turn off automatically. Press

the ‘OK’ button to select this option. The LCD

screen will return to the menu programming

options.

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 20

continued

Menu and Programming Options

5. Press the ‘OK’ button. The LCD screen will return

to the menu programming options.

Setting the ‘BREW TEMP’ feature

3. Press

The Brewer brews coffee at a preset temperature of

192°F. You can adjust this temperature down by 5°F

if you prefer a cooler cup of coffee, tea or hot cocoa.

6. To exit the menu programming options, press

the ‘MENU’ button. Alternatively, press the

button to reach ‘EXIT MENU’ and press the

‘OK’ button. The LCD screen will return to the

main screen.

Select fr

a small m

oz. servi

1. Press the ‘MENU’ button. The programming

options will appear on the LCD screen with a

blinking indicator on ‘CLOCK SET’.

2. Press the

button to reach ‘BREW TEMP’.

When using the Brewer at high altitudes (over

5,000 feet), if boiling occurs, use the ‘BREW

TEMP’ feature to lower the temperature.

3. Press the ‘OK’ button. The LCD screen will

indicate the default brew temperature, 192°F

or the pre-programmed brew temperature.

4. Once t

button

progra

Note

5. To exit

‘MENU

to reac

The LC

and in

Setting the ‘BREW SIZE’ feature

This feature allows you to avoid scrolling through

brew sizes if a particular size is chosen most often.

1. Press the ‘MENU’ button. The menu programming

options will appear on the LCD screen with a

blinking indicator on ‘CLOCK SET’.

2. Press the

button to reach ‘BREW SIZE’.

Press the ‘OK’ button. The LCD screen will

indicate the default brew size (7.25 oz.).

4. Press the

button to reach the

appropriate brew temperature. The temperature

can only be set between 187°F and 192°F.

The Brewer will remain at the selected

temperature for subsequent brews

Note

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 21

will return

3. Press the

button to go up in size or the

button to go down in size.

press

ess the

to the

Select from a stronger small cup (5.25 oz. serving),

a small mug (7.25 oz. serving), a large mug (9.25

oz. serving) or a travel mug (11.25 oz. serving).

Note

over

4. Once the brew size is selected, press the ‘OK’

button. The LCD screen will return to the menu

programming options.

Note

5. To exit the menu programming options, press the

‘MENU’ button. Alternatively, press the

button

to reach ‘EXIT MENU’ and press the ‘OK’ button.

The LCD screen will return to the main screen

and indicate the brew size selected.

rough

st often.

gramming

with a

ZE’.

will

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 22

Care and cleaning

Before cleaning, ensure the Brewer has been turned

off. Switch off at the wall outlet, unplug the power

cord and allow the machine to cool.

2. Disass

the Lid

directi

Holder

Cleaning the brewer housing

3. Wash

soapy

Regular cleaning of the Brewer’s housing and

external components is recommended.

thorou

shelf d

1. Never immerse the Brewer in water or other

liquids. Wipe the housing with a soft, damp

cloth then dry thoroughly.

4. Store

My K-

of the

Do not use abrasive scouring pads or cleaners

when cleaning the housing as they may scratch

Cleaning

3. Wash both parts in warm soapy water with a

the surface.

1. Wipe t

then d

soft cloth, then rinse and dry thoroughly. The

Note

K-Cup Holder and Funnel are also top-shelf

into th

dishwasher safe.

2. Wash

soft cl

2. The Drip Tray and Drip Tray Plate can accumulate

up to 12 oz. of overflow. The water level indicator

visible through the Drip Tray Plate will pop up

when this occurs. The Drip Tray and Drip Tray

Plate should then be removed, emptied and

cleaned. To remove the Drip Tray assembly, slide

it toward you, keeping it level at all times to

avoid spilling. Wash both parts in warm soapy

water with a soft cloth, then rinse and dry

thoroughly. The Drip Tray and Drip Tray Plate are

also top-shelf dishwasher safe.

The K-Cup Holder houses a needle in the inside

dry the

remain

the dis

base. Should a clog arise due to coffee grinds, it

can be cleaned using a paper clip or similar tool.

Insert the paper clip into the Needle to loosen the

clog and push it out. To avoid risk of injury, do not

Rinse th

ensure t

remain a

supply in

put your fingers in the K-Cup Holder.

Note

4. After cleaning, place the Funnel back onto the

K-Cup Holder.

Cleaning the K-Cup Holder

5. Place the assembled K-Cup Holder back into

Cleaning

the Brewing Chamber, aligning the arrow

Regular cleaning of the K-Cup Holder is

recommended.

on the K-Cup Holder with the arrow

Regular cle

We sugges

replaced e

the Brewing Chamber. Use caution when doing

this as there is a sharp needle on the underside

of the Brewing Chamber Head that punctures the

1. Raise the Safety Locking Arm and remove the

K-Cup Holder from the Brewing Chamber (refer to

Brewing with the My K-Cup Accessory, page 12)

1. Disass

Lower

K-Cup .

2. Disassemble the K-Cup Holder buy pulling

Cleaning the My K-Cup^®accessory

Discar

downwards on the Funnel located at the base of

the Holder.

2. Wash

soapy

Regular cleaning of the My K-Cup accessory is

recommended.

thorou

dishw

1. Remove the assembled My K-Cup Holder from

the Brewer by raising the Safety Locking Arm. Use

caution as the My K-Cup Holder will be hot.

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 23

2. Disassemble the My K-Cup^®Holder by removing

Replace the Charcoal Filter every 2 months, or 60

tank refills, more if you have hard water.

the Lid from the Holder in a counter-clockwise

direction. Remove the Filter Basket from the

Holder, discard the grounds.

Note

3. Wash the Lid, Filter Basket and Holder in warm

soapy water with a soft cloth, then rinse and dry

To order replacement Charcoal Filters, call Breville

Customer Service on 1-866-BREVILLE or visit

www.breville.com.

thoroughly. All parts K-Cup Holder are also top-

shelf dishwasher safe.

We recommend removing the Water Filter if you

choose not to replace the Charcoal Filter every 2

months, as the filter may clog and affect the smell

and taste of the water.

4. Store the assembled My K-Cup Holder in the

My K-Cup Storage compartment located on top

of the Brewer.

Cleaning the water tank and lid

Descaling the brewer

with a

y. The

p-shelf

1. Wipe the Water Tank Lid with a soft, damp cloth

then dry thoroughly. The Lid should not be put

into the dishwasher.

Mineral content in water varies from place to place.

Depending on the mineral content of the water in

your area, calcium deposits or scale may build up in

your Brewer. Scale is non-toxic, but left unattended, it

can hinder the Brewer’s performance. Descaling your

Brewer helps maintain the heating element, and

other internal parts of the Brewer that come in

contact with water.

2. Wash the Water Tank in warm soapy water with a

soft cloth, then rinse and dry thoroughly. Do not

dry the inside of the Tank with a cloth as lint may

remain. The Water Tank should not be put into

the dishwasher.

e inside

nds, it

ar tool.

sen the

do not

The Brewer should be descaled every 3-6 months to

ensure optimal performance. It is possible for calcium

deposits to build up faster, making it necessary to

descale more often.

Rinse the Water Tank thoroughly after cleaning to

ensure that no cleaners or cleaning solutions

remain as they may contaminate the water

supply in the Brewer.

Note

This Brewer is equipped with sensors to detect when

scale buildup is interfering with the performance of

the Brewer. When this is detected, the LCD screen

will indicate ’DESCALE’.

nto the

Note

ack into

Cleaning the water filter

Regular cleaning of the Water Filter is recommended.

We suggest doing this when the Charcoal Filter is

replaced every 2 months or 60 tank refills.

n doing

nderside

ctures the

1. Disassemble the Water Filter by removing the

Lower Filter Holder from the Upper Filter Holder.

Discard the Charcoal Filter.

2. Wash the Upper and Lower Filter Holder in warm

soapy water with a soft cloth, then rinse and dry

thoroughly. Both parts are also top-shelf

dishwasher safe.

ory is

der from

Arm. Use

e hot.

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 24

continued

Care and cleaning

Troub

11. Repeat the cleansing brew process until the

The Brewer will continue to operate even when

the LCD screen indicates ‘DESCALE’.

Water Tank is empty, pouring the contents of the

cup into the sink after each cycle. You may need

to perform additional rinse cycles if you notice

any residual taste. Remember to raise and lower

the Safety Locking Arm between each cycle so

the control panel buttons illuminate.

Possib

Note

Brewer

However, if you do not descale the Brewer soon after

it is displayed, continued scale build-up could

damage the Brewer. If this occurs, ‘DESCALE’ will

begin to flash, alerting you to the potential damage to

the Brewer if you do not descale immediately.

12. The machine is now ready for use.

If the LCD screen continues to indicate

‘DESCALE’ after completing the process, repeat

the process above.

Promptly follow these steps each time the LCD

screen indicates ‘DESCALE’ to ensure the Brewer

functions optimally.

Brewer

Note

1. Empty the Water Tank.

2. Pour 60 oz. of vinegar into the Water Tank, filling to

just below the top edge of the clear viewing area.

Storage

3. Place a 12 oz. or larger ceramic cup (do not use

a plastic cup) on the Drip Tray. The Drip Tray and

Drip Tray Plate can be removed to accomodate

taller mugs and travel mugs

Before cleaning or moving the Brewer to a different

location, ensure the Brewer has been turned off.

Switch off at the wall outlet, unplug the power cord

and allow the machine to cool. The Water Tank

should be emptied and dried thoroughly.

4. Select the largest brew size (11.25 oz. serving)

by pressing the

button on the control panel.

• Store your Brewer in its upright position to avoid

water leakage from the inner tank.

5. Run a cleansing brew without a K-Cup (refer to

Brewing Hot Water, page 15). Pour the contents

of the cup into the sink.

• Store your Brewer in a frost free environment.

Storing the Brewer in a cold environment runs the

risk of water freezing inside the Brewer and

causing damage. If your Brewer has been stored in

an environment below freezing, ensure to let it

warm to room temperature for at least 2 hours

before using.

6. Repeat the cleansing brew process until the

Water Tank is empty, pouring the contents of the

cup into the sink after each cycle. Remember

to raise and lower the Safety Locking Arm

between each cycle so the control panel

buttons illuminate.

Coffee

or wate

• When preparing to use the Brewer after storage,

we recommend rinsing the Water Tank with fresh

water and running three cleansing brews without

7. Let the Brewer stand for at least 4 hours while

still on.

There a

from 13

on K-Cu

Custom

www.br

a K-Cup (refer to Brewing Hot Water, page 15).

8. Rinse the Water Tank thoroughly and fill with

fresh water.

9. Place a 12 oz. or larger ceramic cup (do not use

a plastic cup) on the Drip Tray.

10. Run a cleansing brew without a K-Cup (refer to

Brewing Hot Water, page 15). Pour the contents

of the cup into the sink.

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 25

Troubleshooting

l the

nts of the

may need

notice

and lower

cycle so

Possible problem

Easy solution

• Plug the Brewer into an independent outlet.

• Check that the Brewer is plugged in securely.

• Plug into a different outlet.

Brewer will not switch on

• Reset circuit breaker if necessary.

• Make sure that the Power Switch has been turned on. The Water Tank

should be illuminated. The ‘BREW’ button,

illuminated.

and

buttons should be

repeat

• After placing the K-Cup in the K-Cup Holder, or the My K-Cup Holder

into the Brewing Chamber, ensure the Safety Locking Arm is pushed down

Brewer will not brew

securely. The LCD screen should indicate ‘READY TO BREW’. The

buttons should illuminate and the 'BREW' button should illuminate and

flash for up to 60 seconds.

and

Note

• If the LCD screen indicates ‘REFILL TANK’, add water to the Water Tank or

make sure the Water Tank is attached correctly to the Brewer (page 15).

different

d off.

wer cord

ank

• If the LCD screen indicates ‘REFILL TANK’ even after refilling, contact

Customer Service on 1-866-BREVILLE (1-866-273-8455).

• If the ‘BREW’ button is not pressed in 60 seconds, the LCD screen will

indicate ‘OPEN HEAD’ and the ‘BREW’ button will be disabled to prevent

accidental activation. To re-activate the brew sequence, open the Brewing

Chamber Head by raising and lowering the Safety Locking Arm completely.

o avoid

• The Exit Needle may be clogged (refer Cleaning the K-Cup Holder,

page 22).

ment.

runs the

stored in

let it

Coffee is too weak

or watery

• Reduce the brew size selection for a “stronger” tasting cup of coffee

(refer to Setting the ‘BREW SIZE’ feature, page 20).

• Try an Extra Bold K-Cup . They have 30% more ground coffee in each

hours

K-Cup portion pack.

torage,

th fresh

without

ge 15).

There are over 150 varieties of Keurig K-Cups

from 13 gourmet partners. For more information

on K-Cups or K-Cup® ordering, call Breville

Customer Service on 1-866-BREVILLE, or visit

www.breville.com.

Note

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 26

continued

Troubleshooting

Warr

One yea

Possible problem

Easy solution

Breville *

defects tha

workmans

date of ori

does not c

commercia

the printed

warranty f

basket, bla

disclaims a

for inciden

Brewer dispenses a

partial cup

• The Exit Needle may be clogged (refer to Cleaning the K-Cup Holder,

page 22).

• The Water Tank may have been removed during brewing. Replace the

Water Tank and perform a cleansing brew without a K-Cup

(refer to Brewing Hot Water, page 15).

• If the LCD screen indicates ‘DESCALE’, follow the instructions, Descaling

your Brewer (page 23)

• If you have repeated the descale procedure on your Brewer two times

and the message is still displayed, contact Customer Service on

1-866-BREVILLE (1-866-273-8455).

Some stat

or limitatio

the forego

The time is not displayed

on the LCD screen

• The time will not be displayed on the LCD screen unless you have set it.

To set the clock, follow the instructions, Setting the ‘CLOCK SET’ feature

(page 17).

ANY WARR

WITH RESP

TO THE ON

• If power is interrupted to the Brewer, you will need to set the clock again.

Brewer shuts off or turns • Check to make sure that the ‘ON-OFF TIME’ and/or the ‘AUTO OFF’

on automatically

features have not been set. To do this, press the ‘MENU’ button and scroll

through the programming options. Both the ‘ON-OFF TIME’ and ‘AUTO

OFF’ features should be ‘INACTIVE‘. If ‘INACTIVE’ is not displayed, follow

the instructions, Setting the ‘ON-OFF TIME’ feature (page 17) and Setting

the ‘AUTO OFF’ feature (page 19).

Some stat

of the imp

goods, so

to you.

This warra

may also h

state to sta

The blue light in the

water tank is flashing

• The water level is low and a full cup cannot be brewed. Add water to

the Water Tank, following the instructions, Re-filling the Water Tank

(page 15).

BR9013 BKC600XL_IB_AMEND.qxp 11/10/07 21:43 Page 27

Warranty

If the appliance should become defective within the

warranty period, do not return the appliance to the

store. Please contact our Customer Service Center.

One year limited warranty

Breville * warrants this Breville appliance against

defects that are due to faulty material or

Toll free phone number:

older,

the

workmanship for a period of one (1) year from the

date of original consumer purchase. This warranty

does not cover damage from abuse, neglect, use for

commercial purposes, or any other use not found in

the printed “Instructions for use” booklet. There is no

warranty for glass parts, glass containers, filter

basket, blades and agitators. HWI Breville expressly

disclaims all responsibility for consequential damages

for incidental losses caused by use of this appliance.

1-866-BREVILLE (1-866-273-8455)

Internet email:

AskUs@BrevilleUSA.com

scaling

mes

AskUs@Breville.ca (in Canada)

ORGINAL RECEIPT IS REQUIRED FOR ALL RETURNS

*HWI Breville products are distributed in Canada by

Some states or provinces do not allow this exclusion

or limitation for incidental or consequential losses, so

the foregoing disclaimer may not apply to you.

Anglo Canadian Housewares, L.P. and in USA by

Metro/Thebe Inc.

set it.

eature

ANY WARRANTY OF MERCHANTABILITY OR FITNESS

WITH RESPECT TO THIS PRODUCT IS ALSO LIMITED

TO THE ONE YEAR LIMITED WARRANTY PERIOD.

k again.

F’

nd scroll

UTO

Setting

Some states or provinces do not allow disclaimer

of the implied warranty with respect to consumer

goods, so the foregoing disclaimer may not apply

to you.

This warranty gives you specific legal rights and you

may also have other legal rights which vary from

state to state or province to province.

r to

Motorola MOTORAZR V3c User Manual
Juniper Networks T1600 User Manual
Intel RAID AXXRSBBU6 User Manual
HP Hewlett Packard EXB 8200SX User Manual
Grindmaster RAP400E User Manual
Grindmaster PB 330 User Manual
Emerson MS7618R User Manual
DeLonghi DD1000TC Series User Manual
Cuisinart DGB625BCU User Manual
Cuisinart DCC 450BK User Manual